sähköiset ja sähköttömät liitännätbinder4

4. Electrical and non-electrical connections

Duoflux DUX 2Duoflux RoHS DUX R 3Sealflux SUX 4Supersolder SOL 6Supersolder Flux SSF 7Thermoflux TMX 8Thermoflux 2010 TMX2 9Thermoflux Clear TMC 10Thermoflux Clear 2010 TMC2 11Thermoflux MPM MPM 12Thermoflux MPM 2010 MPM2 13Thermoflux Multicolour MTC 14Thermoflux Yellow/Green TMY 15Thermoflux Yellow/Green 2010 TMY2 16Thermoquick TMQ 17Thermoquick 2010 TMQ2 18Topflux TUX 19Topflux RoHS TUX R 20

www.novatio.com 4.1


Duoflux DUX

4 OPERATIONS IN ONE SINGLEACTION

• Connecting, soldering, insulating and

sealing.

• Connects both flexible and rigid

conductors.

• Can be installed quickly and easily

with NOVAFLAME MULTI TORCH.

• Provides absolutely waterproof

connections.

• Transparent insulation allows visual

control of the connection.

• Resistant to temperatures from -60°C

to +130°C.

• Unique composition:

- Shrinkable kynar sheath: flame-

retardant, remains flexible, high

insulation power

- Tin-lead solder ring with incorporated

flux: no voltage loss, solid connection,

perfectly smooth flow

- Thermoplastic adhesive sealing ring

seals completely.

General information

DUOFLUX consist of a heat-shrinkablepolymeric sleeve containing two solder ringswith an incorporated flux and twothermoplastic sealing rings.DUOFLUX has been developed especially formaking electrical connections, which requirehigh quality, reliability, long life span andwater tightness.DUOFLUX is very easy to install, the qualityof the connection can be visually checkedand it requires no special tools.

DUOFLUX comes in four sizes, coded by theinternational colour code system and suitablefor the most frequent cable diameters.DUOFLUX can be applied on both twisted(flexible) and solid (rigid) conductors, suitablefor copper as well as tinned wires, whethercombined or not.

Technical information and packaging

External wall: radiation cross-linked modifiedpolyolefin.Solder rings: 2 rings Cd 18, Sn 51, pb 32 %with activated flux.Sealing rings: thermally stabilizedthermoplasticVoltage loss: < 0,002 V.Connection resistance: < 0,004 Ohm.

Insulation resistance: > 109 Ohm.Installation temperature: 180°C.Temperature resistance: -60°C to +130°C. .Breakdown voltage: > 600V.Degree of protection against humidity: IP 68,stays usable in water.

Applications and use

• garages and car body workshops• installation of car radios and alarm systems• installation of towing hooks• truck and bus construction• earth moving equipment• agriculture contractors, farmers• sign posting, neon signs• horticulture and exterior lighting• electrical installation and maintenanceservices

• pleasure aircrafts• repair of tools and machines• building industry• industrial maintenance service• ship building and ship repair• pleasure crafts and outboard motors• motorcycles• amusement parks

Product references

Article nr Name Section

830310000 Duoflux Clear 0,2mm/0,7mm Electrical and non-electricalconnections

830320000 Duoflux red 0,5mm/1mm Electrical and non-electricalconnections

830330000 Duoflux blue 1,5mm/2,5mm Electrical and non-electricalconnections

830340000 Duoflux yellow 3mm/6mm Electrical and non-electricalconnections

4.2 www.novatio.com V0.1


Duoflux RoHS DUX R

THE FASTEST AND SIMPLESTMETHOD FOR MAKINGPROFESSIONAL CONNECTIONS


sealing in one single action.

• RoHS approved.

• Joins conductors of different

connections.

• Perfectly waterproof connections.

General information

DUOFLUX RoHS consists of a heat-shrinkable polymeric sleeve containing twosolder rings with an incorporated flux andtwo thermoplastic sealing rings.DUOFLUX RoHS has been developedespecially for making electrical connections,which require high quality, reliability, long lifespan and water tightness.DUOFLUX RoHS is very easy to install, thequality of the connection can be visuallychecked and it requires no special tools.

DUOFLUX RoHS comes in four sizes, codedby the international colour code system andsuitable for the most frequent cablediameters.DUOFLUX RoHS can be applied on bothtwisted (flexible) and solid (rigid) conductors,suitable for copper as well as tinned wires,whether combined or not.


External wall: radiation cross-linked modifiedpolyolefin.Solder rings: Sn42 Bi58 per ANSI/J-STD-006with activated flux.Sealing rings: thermally stabilizedthermoplastic.Voltage loss: < 0,002 V.

Connection resistance: < 0,004 Ohm.Insulation resistanc : > 109 Ohm.Installation temperature: 138°C.Temperature resistance: -55°C to +125°C.Breakdown voltage: > 600V.




Product references


830311000 Duoflux RoHS Clear 0,7mm² Electrical and non-electricalconnections

830321000 Duoflux RoHS red 1,5mm² Electrical and non-electricalconnections

830331000 Duoflux RoHS blue 2,5mm² Electrical and non-electricalconnections

830341000 Duoflux RoHS yellow 6mm² Electrical and non-electricalconnections

830351000 Duoflux RoHS grey 7mm² Electrical and non-electricalconnections

V0.0 www.novatio.com 4.3


Sealflux SUX

WATERPROOF SHRINK CONNECTION

• Cable connector provided with wear-

resistant nylon insulation and meltable

adhesive.

• Shrink ratio of the insulation 2:1.

• Vibration resistant with a high tensile

strength.

• High temperature resistance.

• Fast and handy to use.

• Highly resistant to wear and

vibrations.

• Resistant to hydraulic oil, solvents,

diesel fuel, petrol, salt water, battery

acids, brake fluid,...

• High insulation resistance.

• 3 transparent colour codes for various

diametres with verification of the

connection.

General information

SEALFLUX insulates and protects electricalconnections from mechanical abuse and wirepull-out.SEALFLUX provides a tough, environmentfriendly sealed wire connection. Their crimpbarrel or terminal, encased in a rugged nylontubing with a special hot-melt adhesive,resists damage from abresions and cuts.

SEALFLUX retains its flexibility and impact-resistance long after similar products havebecome brittle.The colours of SEALFLUX are coded to easilyidentify the wire diameter, yet they aretransparent for the inspection of the finishedconnection.


Insulation resistance: Megohms 103.Dielectric resistance: 2,5 Kilovolt.Chemical resistance: diesel fuel, brake fluid,antifreeze, 5% salt water, motor oil,...Solvent resistance: isopropyl alcohol,trichloroethylene, gasoline.Constant temperature: from -55°C to 125°C.

Minimum shrink temperature: 180°C.Voltage rating: 600 Volt maximum.Shrink ratio: approximately 2:1.Electrical properties: disruptive strength 1000Volt, insulation resistance 103 Megohms.


• garage and bodywork• built-in car radios and alarm systems• assembling of towing hooks• lorry and bus manufacturers• contract workers, farmers, earth-movingmachines• signalisation and neon lights• horticulture and outdoor lighting

• electric installation and maintenanceservices• repair of tools and machines• industrial maintenance services• motorbikes and mopeds• shipbuilding and -repair• amusement parks



Sealflux SUX

Product references


834610000 Sealflux slide plug female Red 6,35 mm Electrical and non-electricalconnections

834410000 Sealflux slide plug female red 4,80 mm Electrical and non-electricalconnections

834620000 Sealflux slide plug female blue 6,35 mm Electrical and non-electricalconnections

834630000 Sealflux slide plug female yellow 6,35 mm Electrical and non-electricalconnections

835610000 Sealflux slide plug male red 6,35 mm Electrical and non-electricalconnections

835620000 Sealflux slide plug male blue 6,35 mm Electrical and non-electricalconnections

833410000 Sealflux fork connector red 4,30 mm Electrical and non-electricalconnections

833420000 Sealflux fork connector blue 4,30 mm Electrical and non-electricalconnections

833520000 Sealflux fork connector blue 5,30 mm Electrical and non-electricalconnections

833530000 Sealflux fork connector yellow 5,30 mm Electrical and non-electricalconnections

832410000 Sealflux ring connector red 4,30 mm Electrical and non-electricalconnections

832510000 Sealflux ring connector red 5,30 mm Electrical and non-electricalconnections

832610000 Sealflux Ringtong Rood 6,50 mm Electrical and non-electricalconnections

832420000 Sealflux ring connector blue 4,30 mm Electrical and non-electricalconnections



832820000 Sealflux ring Connector blue 8,40 mm Electrical and non-electricalconnections

832120000 Sealflux ring Connector blue 10,50 mm Electrical and non-electricalconnections

832530000 Sealflux ring Connector yellow 5,30 mm Electrical and non-electricalconnections




831010000 Sealflux connector red Electrical and non-electricalconnections

831020000 Sealflux connector blue Electrical and non-electricalconnections

831030000 Sealflux connector yellow Electrical and non-electricalconnections

836110000 Sealflux tulip male red Electrical and non-electricalconnections

836120000 Sealflux tulip male blue Electrical and non-electricalconnections

836010000 Sealflux tulip female red Electrical and non-electricalconnections

836020000 Sealflux tulip female blue Electrical and non-electricalconnections



Supersolder SOL

SUPERSTRONG MULTI-PURPOSE,LOW TEMPERATURE SOLDER

• 5 times stronger than normal soft

solders (14,5 kg/mm²).

• Bonds all types of metals, even

aluminium, when using

SUPERSOLDER FLUX.

• Excellent on stainless steel.

• Very low bonding temperature (221

°C). - Prevents deforming of base

material.

• Non-toxic - contains no cadmium,

zinc, antimony or copper.

• 50% harder than normal solders.

• Easy to handle - does not drip.

• Stays shiny - does not corrode.

• 25% better electrical conductivity

than normal soft solders.

• Resists vibrations.

• SUPERSOLDER FLUX is only required

for aluminium and light alloys.

General information

SUPERSOLDER is a multi-purpose lowtemperature solder, which joins steel,galvanized steel, copper, brass.SUPERSOLDER is also suitable foraluminium or light alloys, when usingSUPERSOLDER FLUX.SUPERSOLDER gives a 5 times higherstrength than normal soft solder and is 50%harder.

The electrical conductivity is 25% better thanfor normal soft solders. Due to its low meltingtemperature, SUPERSOLDER is very easy toapply and will not deform the base material.SUPERSOLDER has a built-in wetting agent.SUPERSOLDER applications stay shiny, donot corrode, and withstand vibrations.


Composition: Tin: 20%<C<95%, Lead:5%<C<80%, Antimony: <5%.Integrated wetting agent.

Melting temperature: 221 °C.Tensile strength: 14,5 kg/mm².


AUTOMOTIVE• filling leaks in radiator cores and heater• repairing gasonline tanks with solderingiron• soldering electrical wiring and connections

PLUMBING• soldering 'wet' pipe joints

MACHINE SHOPS• joining ans sealing air ducts

ELECTRICAL SHOPS• soldering wires to brush holders• instrument repair• soldering resistors, condensers, coils andcapacitors

Product references

Article nr Name Content Section

373208000 Supersolder Tube diam 0,5 mm 7,5 g Electrical and non-electricalconnections

373008000 Supersolder Tube diam 1,5 mm 30 g Electrical and non-electricalconnections

373128000 Supersolder Coil diam 1,5 mm 450 g Electrical and non-electricalconnections

373150000 Supersolder Flux 50 gElectrical and non-electricalconnections



Supersolder Flux SSF

SUPERSTRONG MULTI-PURPOSE,LOW TEMPERATURE SOLDER

• 5 times stronger than normal soft

solders (14,5 kg/mm²).

• Bonds all types of metals, even

aluminium, when using

SUPERSOLDER FLUX.

• Excellent on stainless steel.

• Very low bonding temperature (221

°C). Prevents deforming of base

material.

• Non-toxic - contains no lead,

cadmium, zinc, antimony or copper.

• 50% harder than normal solders.

• Easy to handle - does not drop.

• Stays shiny - does not corrode.

• 25% better electrical conductivity

than normal soft solders.

• Resists vibrations.

• SUPERSOLDER FLUX is only required

for aluminium and light alloys.

General information

SUPERSOLDER FLUX is a liquid thatconnects solder aluminium withSUPERSOLDER at low temperature. Due to

its low melting temperature, SUPERSOLDERis easy to use and it will not deform the basematerial.


Appearance (at 20°C): liquid.Odour: characteristic.Colour: variable in colour, depending on thecomposition.Boiling point/boiling range: 134°C.Flashpoint: 135°C.

Explosion limits: 1.6-10 vol% (°C).Relative density (at 20°C): 1.2.Water solubility: soluble.Relative vapour density: > 2.Auto-ignition point: 305°C.


• Warm up the piece of aluminium evenlywith a welding torch or a hot air gun. Makesure that the piece stays at temperature,either by insulating it maximally between thejaws of a bench-vise, or by placing it onfireproof bricks. Larger pieces have to beinsulated by means of a heat-proof paste.• When sufficient temperature has beenobtained, the flux can be applied on thesurface of the build-up or a joint to be made.The flux will start boiling and will flow at thatmoment.• Keep on warming up the piece evenly andavoid direct contact between the source ofheat and the flux.

• Dip the Supersolder wire in the flux andbring it in contact with the piece of aluminiumor the joint. Always avoid direct contact withthe source of heat. When the requiredtemperature has been obtained,SUPERSOLDER will melt and adhere to thepiece of aluminium with excellent cappillarity.When necessary, add some extra flux fromtime to time.• When the repair, the build-up or the joint isready, let the piece cool off for about 30seconds without moving it, so thatSUPERSOLDER can solidify.• Rinse the piece with water and remove allremainders of the flux with a metal brush.

Product references


373150000 Supersolder Flux 50 g Electrical and non-electricalconnections



Thermoflux TMX

UNIQUE, SHRINKABLE INSULATIONFOR MULTIPURPOSE USE

• Consists of two layers.

• Outside layer shrinks. Inside layer of

adhesive melts.

• The adhesive seals the connection

completely, making it strong and

perfectly waterproof.

• Excellent corrosion, U.V., water,

chemical and acid resistance.

• Can be applied directly to copper.

• Durable.

• THERMOFLUX moulds to any shape.

• Fast, simple and safe to use.

• Flame retardant and permanently

flexible.

• Easy to apply.

General information

THERMOFLUX is a flexible, heat shrinkabledual wall tubing with an integrally bondedmeltable adhesive inner lining, designed toprovide permanent moisture proofencapsulation to a wide variety of substratesand uses.THERMOFLUX has a unique inner wall whichmelts when heated and is forced into thecrevices and interstices by the shrinking ofthe outer wall.

When cooled the entire mass becomes aflexible, tough homogeneous covering with acontrolled wall thickness.THERMOFLUX is manufactured fromradiation cross-linked polyolefins.THERMOFLUX shrinks to 1/3 of its supplieddiameter and thus only a few sizes (8) arerequired to cover a full range of irregularshapes in a wide variety of applications.


Temperature resistence: -55 + 150°C.Shrink temperature: 125°C.Shrink ratio: 3/1.Tensile strenght ISO 37: 11.5 MPa.Ultimate elongation ISO 37: 490%.Flexibility: flexible.Dielectric strength I EC 243: 30 MV/m (VDE0303 Pt2).Electrical resistance: 1013Ohm.

Flame retardancy ASTM D 876, ASTM D2671: Inner wall: no.Outer wall: yes, retardant.Fluid resistence ISO 1817 and ISO 37Immersion 24h at 23°C: hydraulic fluid:excellent; aviation fuel F 40: good; lubricatingoil 0-149: good; Diesel fuel F-54: good.


• insulation and protection of wires andcomponents• wire terminal protection• reinforcement of wire splits• prevention of electrolytic corrosion• insulation and protection of automotiveelectrical parts• protection of coaxial cable connectors• synthetic, fuel and hydraulic oil resistantapplications

• can be used on all electrical applications(cables - cables splycing - connections), toinsulate, to protect and to seal. Can be usedin contact with chemicals. Is not resistant toearth alcalines. Protects metal tubing againstcorrosion and wear.

Product references


800320000 Thermoflux 3,2mm/1,0mm Electrical and non-electricalconnections










Thermoflux 2010 TMX2

UNIQUE, SHRINKABLE INSULATION

• Cadmium free.


• Outside layer shrinks. Inside layer of

adhesive melts.

• The adhesive seals the connection

completely, making it strong and

perfectly waterproof.

• Excellent corrosion, U.V., water,

chemical and acid resistance.

• Can be applied directly to copper.

• Durable.

• THERMOFLUX 2010 moulds to any

shape.


• Flame retardant and permanently

flexible.

• Easy to apply.

General information

THERMOFLUX 2010 is a flexible, heatshrinkable dual wall tubing with an integrallybonded meltable adhesive inner lining,designed to provide permanent moistureproof encapsulation to a wide variety ofsubstrates and uses.THERMOFLUX 2010 has a unique inner wallwhich melts when heated and is forced intothe crevices and interstices by the shrinkingof the outer wall. When cooled the entiremass becomes a flexible, toughhomogeneous covering with a controlled wallthickness.

THERMOFLUX 2010 is manufactured fromradiation cross-linked polyolefins.THERMOFLUX 2010 shrinks to 1/3 of itssupplied diameter and thus only a few sizes(8) are required to cover a full range ofirregular shapes in a wide variety ofapplications.


Operating temperature: -55 °C to +110°C.Shrink temperature: >110°C.Tensile strenght ASTM D 638: 11 N/mm².Elongation at break ASTM D 638: 300%.Water absorption ASTM D 570: ≤ 0.5%.Specific gravity ASTM D 792: 1.45g/cm³.Heat shock 4 hours at 250°C ASTM D 2671:no dripping, cracking or flowing.Heat aging 168 hours at 175°C ASTM D 638:elongation 250%.

Low temperature flexibility -55°C ASTM D2671C: no crackingFungus resistance AMS-DTL-7444: nogrowth.Chemical resistance AMS-DTL-23053/4C:good.Copper corrosion ASTM D 2671 B: nocorrosion.Dielectric strenght ASTM D 2671: 15 kV/mm.Volume resistivity ASTM D 257: 1014ohm cm.


• insulation and protection of wires andcomponents• wire terminal protection• reinforcement of wire splits• prevention of electrolytic corrosion• insulation and protection of automotiveelectrical parts• protection of coaxial cable connectors• synthetic, fuel and hydraulic oil resistantapplications

• can be used on all electrical applications(cables - cables splycing - connections), toinsulate, to protect and to seal. Can be usedin contact with chemicals. Is not resistant toearth alcalines. Protects metal tubing againstcorrosion and wear.

Product references


806003000 Thermoflux 2010 3mm/1mm Electrical and non-electricalconnections

806004000 Thermoflux 2010 4,8mm/1,6mm Electrical and non-electricalconnections








Thermoflux Clear TMC

SPECIAL CLEAR SHRINKABLEINSULATION


• Outside layer shrinks - inside layer of

adhesive melts.

• Makes a strong and waterproof

connection.

• Moulds itself to any shape.

• Remains flexible.

• Stays clear - resistant to UV light.

• Transparency makes it possible to

check connections.

General information

THERMOFLUX CLEAR is a clear, flexible,heat shrinkable dual wall tubing with anintegrally bonded meltable adhesive innerliner, designed to offer permanent moisture-proof insulation to a wide variety ofsubstrates.THERMOFLUX CLEAR offers excellent clarityfor protection of substrates that may needinspection during service.

While it has a high glossy finish, the toughouter packet gives excellent mechanicalstrength with a high resistance to splitting.The high shrinking ratio means that only fivesizes are needed to give protection to a fullrange of irregular shapes with widely varyingapplications.


Operating temperature: -55 + 150°C.Shrink temperature: 125°C.Shrink ratio: 3/1.Tensile strength ISO 37: 11.5 MPa.Ultimate elongation ISO 37: 490%.Flexibility: flexible.Dielectric strength I EC 243:12 MV/m (VDE0303 P12).Flame retardancy ASTM D 876, ASTM D2671: Inner wall: no. Outer wall: no.

Fluid resistance ISO 18117 and ISO 37immersion 24h at 23°C: hydraulic fluid: good;aviation fuel F40: good; lubrication oil 0-149:good; Diesel fuel F54: good.Electrical resistance: 1013Ohm/cm.


• environmental protection for a wide varietyof electrical and electronic components,including wire splits and harness breakouts• transparent insulation of connections andcomponents who need to be checked forservice• all connection and component coverings

• can be used on all electrical applications(cables - cables splycing, connections) toinsulate, to protect and to seal. Can be usedfor applications in contact with chemicals. Isnot resistant to earth alcalines. Protects metaltubing against corrosion and wear

Product references


820320000 Thermoflux Clear 3,2mm/1,0mm Electrical and non-electricalconnections









Thermoflux Clear 2010 TMC2

SPECIAL CLEAR SHRINKABLEINSULATION

• Cadmium and halogen free.

• Self extinguishing outer wall.



adhesive melts.

• Makes a strong and waterproof

connection.

• Moulds itself to any shape.

• Remains flexible.

• Stays clear - resistant to UV light.

• Transparency makes it possible to

check connections.

General information

THERMOFLUX CLEAR 2010 is a clear,flexible, heat shrinkable dual wall tubing withan integrally bonded meltable adhesive innerliner, designed to offer permanent moisture-proof insulation to a wide variety ofsubstrates.THERMOFLUX CLEAR 2010 offers excellentclarity for protection of substrates that mayneed inspection during service.

While it has a high glossy finish, the toughouter packet gives excellent mechanicalstrength with a high resistance to splitting.The high shrinking ratio means that only fivesizes are needed to give protection to a fullrange of irregular shapes with widely varyingapplications.


Operating temperature: -55°C to + 135°C.Shrink temperature: > 110°C.Tensile strenght ASTM D 638: 11N/mm².Elongation at break ASTM D 638: 300%.Water absorption ASTM D 570: ≤ 0.50%.Specific gravity ASTM D 792: 1.45 g/cm³.Flammability: noneHeat shock 4 hours at 250°C ASTM D 2671:no dripping, cracking or flowing.Heat aging 168 hours at 175°C ASTM D 638:elongation 250%.

Low temperature flexibility -55°C ASTM D2671C: no crackingFungus resistance AMS-DTL-7444: nogrowth.Chemical resistance AMS-DTL-23053/4C:good.Copper corrosion ASTM D 2671 B: nocorrosion.Dielectric strenght ASTM D 2671: 15 kV/mm.Volume resistivity ASTM D 257: 1014ohm/cm.


• environmental protection for a wide varietyof electrical and electronic components,including wire splits and harness breakouts• transparent insulation of connections andcomponents who need to be checked forservice• all connection and component coverings• THERMOFLUX CLEAR 2010 can be used

on all electrical applications (cables - cablessplycing, connections) to insulate, to protectand to seal. Can be used for applications incontact with chemicals. Is not resistant toearth alcalines. Protects metal tubing againstcorrosion and wear

Product references


806303000 Thermoflux Clear 2010 3mm/1mm Electrical and non-electricalconnections

806304000 Thermoflux Clear 2010 4,8mm/1,6mm Electrical and non-electricalconnections









Thermoflux MPM MPM

THICK-WALLED SHRINKABLETUBING FOR INSULATING, SEALINGAND PROTECTING


• Outside layer shrinks - inside melts

and seals making it perfectly

waterproof.

• Excellent bonding and sealing

characteristics.

• Moulds to most irregular shapes.

• Easy to apply with gas torch or hot air

gun.

• Excellent resistance to chemicals,

acids and alkalines.

• Flame retardant - resists UV-light.

General information

THERMOFLUX MPM is a semi-flexible, heatshrinkable tubing with an integrally bondedmeltable sealer inner lining designed toprovide permanent moisture-proofencapsulation for a wide range ofapplications.The inner wall melts when heated and isforced into interstices by the shrinking of theouter wall,

so that when cooled, the substrate isencapsulated by a tough protective,moisture-proof barrier. An operating range for-60°C up to 120°C and a shrink ratio of 3/1 asstandard means that the tubing offerssuperior environmental protection to a widerange of irregular shapes with differentdimensions.


Operting temperature: -60 + 145°C.Shrink temperature: 135°C.Shrink ratio: 3/1.Tensile strenght ISO 37: 18.6 MPa.Ultimate elongation ISO 37: 400%.Flexibility: semi-flexible.Dielectric strength I EC 243:14 MV/m (VDE0303 P12).Flame retardancy ASTM D 876, ASTM D2871:

Inner wall: no. Outer wall: yes.Fluid resistance ISO 18117 and ISO 37immersion 24h at 23°C: hydraulic fluid: good;aviation fuel F40: good; lubrication oil 0-149:good; Diesel fuel F54: good.Electrical resistance: 1016Ohm/cm.


THERMOFLUX MPM can be used on allelectrical applications (cables, cablessplycing, connections) to insulate, to protectand to seal.

Can be used for applications in contact withchemicals or earth alcalines. Protects metaltubing against corrosion and wear.

Product references


810250000 Thermoflux MPM 25mm/8mm Electrical and non-electricalconnections










Thermoflux MPM 2010 MPM2

THICK-WALLED POLYOLEFINSHRINKABLE TUBING FORINSULATING, SEALING ANDPROTECTING

• Shrink ratio: 4/1.


• Outside layer shrinks - inside melts

and seals making it perfectly

waterproof.

• Excellent bonding and sealing

characteristics.

• Moulds to most irregular shapes.

• Easy to apply with gas torch or hot air

gun. Excellent resistance to

chemicals, acids and alkalines.

• Flame retardant - resists UV-light.

General information

THERMOFLUX MPM 2010 is a semi-flexible,heat shrinkable tubing with an integrallybonded meltable sealer inner lining designedto provide permanent moisture-proofencapsulation for a wide range ofapplications.The inner wall melts when heated and isforced into interstices by the shrinking of theouter wall, so that when cooled, the substrateis encapsulated by a tough protective,moisture-proof barrier.

An operating range for -60°C up to 120°Cand a shrink ratio of 4/1 as standard meansthat the tubing offers superior environmentalprotection to a wide range of irregular shapeswith different dimensions.


Operating temperature: -40°C to +120°C.Shrink temperature: > 110°C.Tensile strenght ASTM D 638: 14 N/mm².Elongation at break ASTM D 638: 400%.Water absorption ASTM D 570: ≤ 0.12%.Specific gravity ASTM D 792: 1.08 g/cm³.Flammability: noneHeat shock 4 hours at 200°C ASTM D 2671:no dripping, cracking or flowing.Heat aging 168 hours at 150°C ASTM D 638:elongation 300%.

Low temperature flexibility -55°C ASTM D2671C: no crackingFungus resistance AMS-DTL-7444: nogrowth. Chemical resistance AMS-DTL-23053/4C: good.Copper corrosion ASTM D 2671 B: nocorrosion.Dielectric strenght ASTM D 2671: 17 kV/mm.Electrical resistance: 1016Ohm/cm.


•THERMOFLUX MPM 2010 can be used onall electrical applications (cables, cablessplycing, connections) to insulate, to protectand to seal. Can be used for applications

in contact with chemicals or earth alcalines.Protects metal tubing against corrosion andwear.

Product references


806112000 Thermoflux MPM 2010 12mm/3mm Electrical and non-electricalconnections












Thermoflux Multicolour MTC

UNIQUE MULTICOLOUR HEATSHRINKABLE INSULATION



adhesive melts.

• Makes strong and waterproof

connections.

• Excellent corrosion, water, chemical

and UV resistance.

• High shrink ratio: 4 to 1.

• Flame retardant.

• 3 diameters cover a wide range of

applications.

• Available in 4 different colours: red,

green, blue, white.

• May be marked with rubber stamp or

marker prior to shrinking. When

heating, ink becomes permanent.


General information

THERMOFLUX MULTICOLOUR is a flexible,heat shrinkable tubing with an integrallybonded meltable adhesive inner lining,designed to provide permanent moistureproof encapsulation to a wide variety ofsubstrates and uses; such as electrical wires,cable jackets, wire breakouts and electricalcomponents. It has a unique inner wall, whichmelts when heated and is forced into thecrevices and penetrates by the shrinkingaction of the outer wall. When cooled the

entire mass becomes a flexible, toughhomogeneous covering with a controlled wallthickness. This product is manufracturedfrom radiation cross-linked polyolefins. It hasa specially formulated adhesive inner wall.THERMOFLUX MULTICOLOUR shrinks to1/4 of its supplied diameter and thus onlythree sizes are required to cover a full rangeof irregular shapes with widely varyingapplications.


Operating temperature: -55 + 150°C.Shrink temperature: 125°C. Shrink ratio: 4/1.Treksterkte ISO 37: 11.5 MPa.Ultimate elongation ISO 37: 490%.Flexibility: flexible.Dielectric strength I EC 243: 30 MV/m (VDE0303 P12).Flame retardancy ASTM D 876 - ASTM D2671: Inner wall: no.

Outer wall: yes, no dripping, cracking orflowing of outer wall.Fluid resistance ISO 18117 and ISO 37immersion 24h at 23°C: hydraulic fluid:excellent; aviation fuel F40: good; lubricationoil 0-149: good; Diesel fuel F54: good.Electrical resistance: 1016Ohm.


• insulation and protection of wires andcomponents• wire terminal protection• reinforcement of wire splices• protective covering of connecting terminals• prevention of electrolytic corrosion• water proofing• connection of underwater motor lead wires

• insulation of neon tube leads• insulation and protection of automotiveelectrical parts• protection of coaxial cable connectors• synthetic, fuel and hydraulic oil resistantapllications• marking of cables and wires

Product references


825110000 Thermoflux Multicolour white 4mm tot 1mm Electrical and non-electricalconnections

825120000 Thermoflux Multicolour blue 4mm tot 1mm Electrical and non-electricalconnections

825130000 Thermoflux Multicolour green 4mm tot 1mm Electrical and non-electricalconnections

825140000 Thermoflux Multicolour red 4mm tot 1mm Electrical and non-electricalconnections











Thermoflux Yellow/Green TMY

THE PERFECT WAY TO INDICATEAND INSULATE EARTHING


• Good temperature resistance

(+300°C).

• Very good chemical resistance.

• Has a high disruptive strength

20 Mv/m.

• Quick, easy and safe to use.

General information

THERMOFLUX YELLOW/GREEN is a flexible,flame retardant tubing, designed to indicateearthing and to apply permanent markings towires and cables.THERMOFLUX YELLOW/GREEN has a verygood temperature resistance.

With peaks up to 300°C. THERMOFLUXYELLOW/ GREEN has a high disruptivestrength of 20 MV/m.THERMOFLUX YELLOW/GREEN has a goodchemical resistance to most fluids andsolvents.


Technische info en verpakkingTemperature resistance: -55 +150°C.Shrink temperature: 120°C.Krimpverhouding: 2/1.Tensile strength: 7 MPa.Ultimate elongation ISO 37:200%.Flexibility: flexible.

Dielectric strength I EC 243: 20 MV/m.Flame retardancy ASTM D 876.UL 224.Fluid resistance ISO 37 immersion 24h at23°C: lubricating oil ISO 1817: fluid 101;Esters ISO 1817: fluid 103.


• indication of earthing on wires, cables, rodsand slats,...

• protection of cables and components

Product references


824110000 Thermoflux Yellow/Green 3,0mm/1,5mm Electrical and non-electricalconnections

824120000 Thermoflux Yellow/Green 6mm/3mm Electrical and non-electricalconnections




824160000 Thermoflux Yellow/Green 19mm/8,5mm Electrical and non-electricalconnections





Thermoflux Yellow/Green 2010 TMY2

THE PERFECT WAY TO MARK


• Good temperature resistance

(+300°C).

• Very good chemical resistance.

• Has a high disruptive strength

20 Mv/m.

• Quick, easy and safe to use.

General information

THERMOFLUX YELLOW/GREEN 2010 is aflexible, flame retardant tubing, designed toindicate earthing and to apply permanentmarkings to wires and cables.THERMOFLUX YELLOW/GREEN 2010 has avery good temperature resistance.

With peaks up to 300°C.THERMOFLUX YELLOW/GREEN 2010 has ahigh disruptive strength of 20 MV/m.THERMOFLUX YELLOW/GREEN 2010 has agood chemical resistance to most fluids andsolvents.


Operating temperature: -55°C to + 135°C.Shrink temperature: >90°C.Tensile strenght ASTM D 638: 13 N/mm².Elongation at break ASTM D 638: 350%.Water absorption ASTM D 570: ≤ 0.20%.Specific gravity ASTM D 792: 1.47g/cm³.Flammability: none.Heat shock 4 hours at 250°C ASTM D 2671:no dripping, cracking or flowing.Heat aging 168 hours at 175°C ASTM D 638:elongation 250%.

Low temperature flexibility -55°C ASTM D2671C: no cracking.Fungus resistance AMS-DTL-7444: nogrowth. Chemical resistance AMS-DTL-23053/4C: good.Copper corrosion ASTM D 2671 B: nocorrosion.Dielectric strenght ASTM D 2671: 20 kV/mm.Volume resistivity ASTM D 257: 1014ohm/cm.


• indication of earthing on wires, cables, rodsand slats, ...

• protection of cables and components

Product references


806402000 Thermoflux Y/G 2010 2,4mm/1,2mm Electrical and non-electricalconnections






806425000 Thermoflux Y/G 2010 25,40mm/12,70mm

Electrical and non-electricalconnections







Thermoquick TMQ

MULTIPURPOSE INSULATION WITHLOW SHRINK TEMPERATURE

• Shrinks completely at 80°C.

• Shrinks very fast - Shrinks to size

while other products are just warming

up.

• Unique flexibility - Perfect fit.

• Can be used in temperature sensitive

applications.

• No risk of damage to surrounding

materials.

• High chemical and electrical

resistance.

• Shrink ratio: 2 to 1.

• 6 diameters for all your applications.

• Available in convenient assortment

tray.

General information

THERMOQUICK is characterised by very fastshrinkage and has already shrunk when otherproducts are just beginning to heat up.

THEMOQUICK offers unique flexibility, aperfectly fitting shape and cannot harm thesurrounding materials.


Operating temperature: -45 +105°C.Shrink temperature: 80°C.Shrink ratio: 271.Tensile strength ISO 17: 18 MPa.Ultimate elongation ISO 37: 400%.Flexibility: highly flexible.Dielectric strength I EC 243: 30 MV/m.Electrical resistance: 1013Ohm.Flame retardancy ASTM D 876, ASTM D2871: Outer wall: yes.

Fluid resistance ISO 1817 and ISO 37immersion 24h at 23°C: water 16 MPa/20MV/m. Diesel fuel 16 MPa/20 MV/m (F-54).Petrol 12 MPa/15 MV/m.Lubrication oil 16 MPa/20 MV/m.Hydraulic fluid 16 MPa/15 MV/m.Battery acid 16 MPa/20 MV/m.Antifreeze 18 MPa/ 25 MV/m.


Due to its extremely low shrinkingtemperature (80°C) .THERMOQUICK isoutstanding for insulation in temperaturesensitive applications such as:ELECTRONICS• connections to printed circuits• contacts in multi-line connectors• repair of multi-line cablesAUTOMOTIVE• all insulation applications in interior ofvehicles -no damage to plastics, carpets orfabric• insulation of contacts in plastic parts, i.e.motors for side windows, central locks andwipers; connectors in ignition and injectionsystems; installation of alarms, telephones,sound systems

• ideal for cable bundling - it will not damagecables because of its low temperature, fastshrinking and high flexibilityINDUSTRY• due to its fast shrinking, it is ideal whenmultiple applications are required, such ascable bundling and connections indistribution, joint and fuse boxes• insulation of connections with temperaturesensitive materials• repair of computer, telephone and signalcables• insulation of contacts in multi-lineconnectorsFOR APPLICATIONS IN CONSTANTCONTACT WITH WATER OR MOISTURE, WERECOMMEND THE USE OF THERMOFLUX

Product references


840100000 Thermoquick storage case (assortment) Electrical and non-electricalconnections

840240000 Thermoquick 2,4 mm /1,2 mm Electrical and non-electricalconnections

840480000 Thermoquick 4,8 mm / 2,4 mm Electrical and non-electricalconnections

840640000 Thermoquick 6,4mm/3,2mm Electrical and non-electricalconnections






Thermoquick 2010 TMQ2

MULTIPURPOSE INSULATION WITHLOW SHRINK TEMPERATURE

• Halogen free.

• Shrinks completely at 80°C.

• Shrinks very fast - Shrinks to size

while other products are just warming

up.

• Unique flexibility - Perfect fit.

• Can be used in temperature sensitive

applications.

• No risk of damage to surrounding

materials.

• High chemical and electrical

resistance.

• Shrink ratio: 2 to 1.

• 6 diameters for all your applications.

• Available in convenient assortment

tray.


General information

THERMOQUICK 2010 is characterised byvery fast shrinkage and has already shrunkwhen other products are just beginning toheat up.

THEMOQUICK 2010 offers unique flexibility,a perfectly fitting shape and cannot harm thesurrounding materials.


Operating temperature: -35°C to +105°C.Shrink temperature: >90°C.Tensile strenght ASTM D 638: 10 N/mm².Elongation at break ASTM D 638: 200%.Water absorption ASTM D 570: ≤ 0.15%.Specific gravity ASTM D 792: 1.4g/cm³.Flammability: noneHeat shock 4 hours at 175°C ASTM D 2671:no dripping, cracking or flowing.Heat aging 168 hours at 150°C ASTM D 638:elongation 100%.

Low temperature flexibility -30°C ASTM D2671C: no crackingFungus resistance AMS-DTL-7444: nogrowth.Chemical resistance AMS-DTL-23053/4C:good.Copper corrosion ASTM D 2671 B: nocorrosion.Dielectric strenght ASTM D 2671: 20 kV/mm.Volume resistivity ASTM D 257: 1014ohm/cm.


Due to its extremely low shrinkingtemperature (80°C) ,Thermoquick 2010 isoutstanding for insulation in temperaturesensitive applications such as:ELEKTRONICS• connections to printed circuits.• contacts in multi-line connectors• repair of multi-line cablesAUTOMOTIVE• all insulation applications in interior ofvehicles - no damage to plastics, carpets orfabric• insulation of contacts in plastic parts, i.e.motors for side windows, central locks andwipers; connectors in ignition and injectionsystems; installation of alarms, telephones,sound systems• ideal for cable bundling - it will not damagecables because of its low temperature, fastshrinking and high flexibility

INDUSTRY• due to its fast shrinking, it is ideal whenmultiple applications are required, such ascable bundling and connections indistribution, joint and fuse boxes• insulation of connections with temperaturesensitive materialsrepair of computer, telephone and signalcables• insulation of contacts in multi-lineconnectors

FOR APPLICATIONS IN CONSTANTCONTACT WITH WATER OR MOISTURE, WERECOMMEND THE USE OF THERMOFLUX2010

Product references


806502000 Thermoquick 2010 2,4mm/1,2mm Electrical and non-electricalconnections




806519000 Thermoquick 2010 19mm/9,5mm Electrical and non-electricalconnections




Topflux TUX



sealing.


conductors.




connections.




to +130°C.


- shrinkable kynar sheath: flame-


insulation power

- tin-lead solder ring with incorporated



- thermoplastic adhesive sealing ring

seals completely.

General information

TOPFLUX consists of a heat-shrinkablepolymeric sleeve containing a spiralwoundcopper cone fitted with a solder ring and asealing ring.TOPFLUX has been developed especially formaking electrical connections, which requirehigh quality, reliability, long life and watertightness.TOPFLUX is very easy to install, the quality ofthe connection can be visually checked and itrequires no special tools.

TOPFLUX comes in four sizes, coded by theinternational colour code system, andsuitable for the most frequent cablediameters.TOPFLUX can be applied on both twisted(flexible) and solid (rigid) conductors, suitablefor copper as well as tinned wires, whethercombined or not.


Upper sealing: ceramic ball - colour coded.External wall: flame-retardant kynar polymer.Solder ring: Sn 60 / Pb 40 with incorporatedflux.Sealing ring: heat-meltable adhesive.Copper spiral: spiral of square copper wirefor increased mechanical resistance.

Voltage loss: < 0,002 V.Connection resistance: < 0,004 Ohm.Electrical resistance: 109Ohm.Installation temperature: 210°C.Temperature resistance: -60°C to +130°C.Breakdown voltage: > 600V.Certificates: Cebec and IP68 KEMA.




Product references


830210000 Topflux Green 4 mm Electrical and non-electricalconnections

830220000 Topflux Red 4,5 mm Electrical and non-electricalconnections

830230000 Topflux Blue 7 mm Electrical and non-electricalconnections

830240000 Topflux Grey 9,5 mm Electrical and non-electricalconnections



Topflux RoHS TUX R



sealing.


conductors.




connections.




to +130°C.


- shrinkable kynar sheath: flame-


insulation power

- tin-lead solder ring with incorporated



- thermoplastic adhesive sealing ring

seals completely.

• RoHS approved.

General information

TOPFLUX RoHS consists of a heat-shrinkable polymeric sleeve containing 2solderrings with integrated flux and 2thermoplastic seal rings.TOPFLUX RoHS was specially designed tomake electric connections, for applicationswhere no compromise is accepted regardingquality, reliability, lifespan and watertightness.TOPFLUX RoHS is very easy to install, thequality of the connection can be visuallychecked and it requires no special tools.

TOPFLUX RoHS comes in four sizes, codedby the international colour code system, andsuitable for the most frequent cablediameters.TOPFLUX RoHS can be applied on bothtwisted (flexible) and solid (rigid) conductors,suitable for copper as well as tinned wires,whether combined or not.


Upper sealing: ceramic ball - colour coded.External wall: flame-retardant kynar polymer.Solder ring: Sn42 Bi58 per ANSI / J-STD-006with incorporated flux.Sealing ring: heat-meltable adhesive.Copper spiral: spiral of square copper wirefor increased mechanical resistance.

Voltage loss: < 0,002 V.Connection resistance: < 0,004 Ohm.Electrical resistance: 109Ohm.Installation temperature: 138°C.Temperature resistance: -40°C tot +100°C.Breakdown voltage: > 600VCertificates: Cebec and IP68 KEMA.




Product references


830211000 Topflux RoHS Green 4 mm Electrical and non-electricalconnections

830221000 Topflux RoHS Red 4,5 mm Electrical and non-electricalconnections

830231000 Topflux RoHS blue 7 mm Electrical and non-electricalconnections

830241000 Topflux RoHS Yellow 9,5 mm Electrical and non-electricalconnections



NOTES

www.novatio.com 4.21

sähköiset ja sähköttömät liitännätbinder4

Documents