[ S p e c i a l S e r i e s ]

[ Standard Features ]

15-hp Vector Drive 10,000-rpm Spindle Standard 40-Taper Tooling Rapids up to 2,100 ipm 10-Pocket Automatic Tool Changer Brushless Servos on All Axes User-Friendly Haas Control ISO Standard G-Code Programming Easy Setup and Operation Made in the USA

Visual Quick Code Programming Coolant System w/80-gal tank 3.5" Floppy Disk Drive Remote Jog Handle User-Definable Macros Hard Drive w/Ethernet Interface

Haas Automation, Inc. | www.HaasCNC.com | 800-331-6746 | Made in U.S.A.

The High-Performance Turning Centers

[ S p e c i a l S e r i e s ]

Haas ST-10 Series Lathes

[ Standard Features ]

6.5" Hydraulic Chucking System

6000-rpm Spindle

15 hp Vector Drive

A2-5 Spindle Nose

1.75" Bar Capacity

15" Color LCD Monitor w/USB Port

1 MB Program Memory

Rigid Tapping

Made in the USA

[ ST-10]

14" x 14" Max Capacity

12-Station BOT Turret

1200 ipm Rapids

[ ST-10Y ]

9" x 14" Max Capacity

2.0" Y-Axis Travel

Live Tooling with C Axis

12-Station VDI Turret

1200 ipm Z-Axis Rapids

Specifications subject to change without notice. Not responsible for typographical errors. Machines shown with optional equipment.

Warranty: 1 Year Parts and Labor

[ Options ] p a r t i a l l i s t

Tailstock with Hydraulic Quill

High-Pressure Coolant Systems

Automatic Tool Presetter System

Belt-Type Chip Conveyor

Ethernet Interface

Haas Intuitive Programming System

Servo Bar Feeder

Parts Catcher

Belt-type chip conveyor available

ISO standard G-code programming through the user-friendly,

full-function Haas CNC control, or use the optional Intuitive

Programming System

2.0" Y-axis travel for off-center milling, drilling and tapping

6000-rpm high-speed spindle;15 hp vector drive

[ T e c h n i c a l S p e c i f i c a t i o n s ]

[ Specifications ]

Capacities ST-10 ST-10Y

Chuck Size 6.5" 6.5" 165 mm 165 mm

Max Cutting Dia. 14.0" 1 9.0" 356 mm 229 mm

Max Cutting Length 14.0" 14.0" without workholding 356 mm 356 mm

Std. Bar Capacity 1.75" 1.75" 44 mm 44 mm

Spindle Max Speed 6000 rpm 6000 rpmMax Motor Rating 15 hp 15 hp

11.2 kW 11.2 kWMax Torque 75 ft-lb @ 1300 rpm 75 ft-lb @ 1300 rpm

102 Nm @ 1300 rpm 102 Nm @ 1300 rpmSpindle Nose A2-5 A2-5Spindle Bore 2.31" 2.31"

58.7 mm 58.7 mm

Swing Diameter Over Front Apron 25.25" 25.25"

641 mm 641 mmOver Cross Slide 16.25" 16.25" 2

413 mm 413 mmOver Tailstock 23.50" 23.50"

597 mm 597 mm

Travels & Feedrates X Axis 7.88" 7.88"

200 mm 200 mmY Axis 2.0"

51 mmZ Axis 14" 14"

356 mm 356 mmX-Axis Rapids 1200 ipm 472 ipm

30.5 m/min 12 m/minY-Axis Rapids 472 ipm

12 m/minZ-Axis Rapids 1200 ipm 1200 ipm

30.5 m/min 30.5 m/min

General Power 3-Phase 195 - 260 V 195 - 260 V

The High-Performance Turning Centers

[ T e c h n i c a l S p e c i f i c a t i o n s ]

Haas ST-10 Series Lathes

Operating Dimensions ST-10/ST-10Y

A. Max Operating Height 71" 1 803 mm

B. Max Operating Width 126" 3 200 mm

C. Max Operating Depth 83" 2 108 mm

With control swung forward. Additional 36" (914 mm) required to open rear service panel.

B

Front Side

C

A

Specifications subject to change without notice. Not responsible for typographical errors. Machines shown with optional equipment. April 2013

C E R T I F I E D

C E R T I F I E D

C E R T I F I E D

The ST-10 has a small footprint, yet provides a maximum capacity of 14" x 14", with a 16.25" swing over the cross slide. The spindle turns to 6000 rpm, and the 15 hp vector drive system provides 75 ft-lb of cutting torque. A 6.5" hydraulic chucking system and 12-station turret are standard.

The ST-10Y adds 4" of Y-axis travel (2" from the centerline) for off-center milling, drilling, and tapping, and comes standard with high-torque live tooling and a servo-driven C axis for versatile 4-axis capability.

Both ST-10 models are equipped with a 12-station turret (BOT or VDI) that indexes in 0.5 seconds to reduce cycle times.

The ST-10Ys generous Y-axis travel, high-torque live tooling, and C-axis motion allow multiple operations in a single setup to reduce part handling and increase accuracy.

1 Max diameter with standard BOT turret; VDI=9.0" (229 mm). 2 With Y axis at 0.