ixtreme burner how to make yours!

10
iXtreme Burner How to make yours! Firstly you need a compatible DVD Writer the range is listed below: LiteOn iHas124-XX B LiteOn iHas224-XX B LiteOn iHas324-XX B LiteOn iHas424-XX B LiteOn iHas524-XX B LiteOn iHas624-XX B (The XX varies the important part is the firmware version B: denotes chipset) THIS TUTORIAL SHOWS THE PROCESS FOR 324! ENSURE YOU USE CORRECT UPGRADE.EXE AND CORRECT FW FOR YOUR DRIVE! Then of course you need the Max iXtreme custom Burner firmware for your relevant model. You will also require the drive upgrade.exe, again ensure correct one for your drive! Plus 2 other utility programs from EEPROM Utility (v6.2.0) Flash Utility (v6.0.1) Firstly connect your drive (normal onboard SATA should be more than adequate) and you can also use X360USB Pro if you wish. (I’m not going explain connecting a SATA cable) Ensure your drive shows in device manager and is listed in windows.

Upload: khangminh22

Post on 05-Mar-2023

0 views

Category:

Documents


0 download

TRANSCRIPT

iXtreme Burner

How to make yours!

Firstly you need a compatible DVD Writer the range is listed below:

LiteOn iHas124-XX B LiteOn iHas224-XX B LiteOn iHas324-XX B LiteOn iHas424-XX B LiteOn iHas524-XX B LiteOn iHas624-XX B

(The XX varies – the important part is the firmware version B: denotes chipset)

THIS TUTORIAL SHOWS THE PROCESS FOR 324! ENSURE YOU USE CORRECT UPGRADE.EXE AND CORRECT FW FOR YOUR DRIVE!

Then of course you need the Max iXtreme custom Burner firmware for your relevant model.

You will also require the drive upgrade.exe, again ensure correct one for your drive!

Plus 2 other utility programs from

EEPROM Utility (v6.2.0) Flash Utility (v6.0.1)

Firstly – connect your drive (normal onboard SATA should be more than adequate) and you can also use X360USB Pro if you wish. (I’m not going explain connecting a SATA cable)

Ensure your drive shows in device manager and is listed in windows.

Upgrade Your Drive

Now run the upgrade.exe relevant to your drive.

(Ensure it is for YOUR iHas drive before you continue)

Click Yes Button

Once complete it will ask you to reboot the PC (do so before you continue!)

BackUp your Current Firmware and EEPROM For safety – you should backup your current drive firmware and EEPROM.

Now open the EEPROM Utility – Ensure the correct Drive (iHas)

press the Backup Eeprom button.

Click Save. Once finished click Exit

Open the Flash Utility

Ensure Correct Drive (iHas) is showing

Click the Read Flash Button (should already have automatically selected the 2MB Option)

Click Save

Writing the Max iXtreme Firmware!

With the Flash Utility still open (ensure iHas selected)

Click Write Flash Button

Click Yes Button!

Navigate and select the correct Firmware for your drive model. (Very important)

Click Open Button

If you are 100% sure you have chosen correct file

Click Yes Button

Wait for the flash to finish

Click Exit!

YOU ARE DONE!

THANKS:

c4eva – for your genius! Dedication and hard work

Team Jungle – awesome

Team Xecuter – for your unfaltering support

codeguys.rpc1.org – for your LiteOn Utilities

Defosho – OPC for 4x burning on MKM003

Testers – for your time and the seriously stupid amount of wasted discs!

Imgburn Notes:

Remember the Max iXtreme Burner will only successfully write at a Maximum speed of 4x on MKM003 and 2.4x on MKM001 DVD+R DL

(Imgburn is the suggested burning software for writing)

Ensure you select perform OPC before write in the settings page as shown below if you intend

to use 4x.