DYWIDAG GRP Anchors and Rock Bolts

2

Introduction .................................................................................................................. 3

Fields of Application ...................................................................................................... 4

Main Advantages ........................................................................................................... 4

System Description ...................................................................................................... 4

System Components .................................................................................................... 4

Specifications ............................................................................................................... 5

Technical Features ......................................................................................................... 6

Accessories .................................................................................................................. 6

Order Information .......................................................................................................... 7

GRP Anchors and Rock Bolts are used as an alternative to conventional ground control elements made of steel. Thanks to the rapid development of production technologies and a higher amount of mechanical excavation, GRP systems have gained importance in underground construction around the world.

Fields of application of GRP Anchors and Rock Bolts range from cuttable rock bolts for underground coal Mining or ground control for mechanical excavations to injection lances or forepoling.

DYWIDAG-Systems International provides a diversified portfolio of GRP systems for various applications in Mining, Tunneling, and Civil Engineering which is completed by longtime experience in the production and application of GRP Anchors and Rock Bolts.

Contents

Introduction

3

Rock reinforcement and rock support in underground excavation

Mechanical excavations TBM, roadheaders, and continuous miners

Cuttable ground control system for underground coal Mining

Injection lance for DYWI Inject Systems

Forepoling element

Tunnel portals and temporary rock reinforcement to be removed by excavators

Ground stabilization in special foundations

Type CS Fully threaded solid GRP bar GRP plate GRP nut

Type CH Fully threaded hollow bar GRP plate GRP nut

Type CR Single-use drill bit different designs and dimensions available Fully threaded self-drilling hollow bar GRP plate GRP nut

Flat and round bars type MN Flat or round GRP bar, optionally available with an angle cut on the far end and a driver tool adapter GRP plate, domed or square version Barrel and wedge anchorage

Lightweight system ensures an easy application in challenging conditions

High tensile load-bearing capacity

Tough and durable, yet easy to cut using mechanical excavators or shearers

Enhanced corrosion resistance

Anti-static components EX-proof system

Tough and resistant threadform adjusted to the demands in surface and underground construction

Composite system consisting of high-strength glass fibers and high performance resin

Bars manufactured according to the requirements of the construction industry

Available in different versions Type CS: fully threaded solid bars Type CH: fully threaded hollow bars Type CR: fully threaded self-drilling hollow bars with advanced, resistant composite structure Flat and round bars type MN Reinforcing bars and composite mesh

Application in combination with concrete, cement grout, anchor mortar, or resin, depending on the application

Fields of Application

System Components

Main Advantages System Description

4

No. Characteristic value / type1) Symbol Unit CS20-190 CS25-350 CS32-560 CH25-250 CH32-350 CR32-3401 Nominal diameter Da,nom [mm] 20 25 32 25 32 322 Nominal cross-section 2) S0 [mm2] 186 346 580 230 340 3403 Nominal weight 2) m [kg/m] 0.56 0.90 1.30 0.64 0.95 0.954 Ultimate load bar 3) Fm.s.nom [kN] 190 350 560 250 350 3505 Ultimate strength bar 4) Rm.s.nom [N/mm2] 1,000 1,000 960 1,000 1,000 1,0006 Elongation bar 5) Agt [%] 2.5 2.5 2.5 2.5 2.5 2.57 Shear force bar 5) FS.nom [kN] 90 160 230 110 140 1408 Ultimate load bar-nut 6) Fm.n.nom [kN] 130 130 1309 Ultimate load bar-coupling 6) Fm.c.nom [kN] 160 160 16010 Delivery lengths 7) L [m] 1.0 - 6.0 1.0 - 6.0 1.0 - 6.0 1.0 - 6.0 1.0 - 6.0 1.0 - 6.011 Color code bar BLACk BLACk BLACk GREEN GREEN RED

1) Status: 2012-08, note: all values are subject to change; other designs and dimensions available on request; corresponding plates according to manufacturer specifications2) Characteristic fractile value3) Calculated from the characteristic ultimate strength value and nominal weight, rounded4) Modulus of elasticity: 40,000 [N/mm]5) According to manufacturer specifications6) Nominal value ultimate system load: bar or hollow bar and steel nut or DYWI Drill steel coupling R32 (standard versions)7) Standard lengths max. 6 [m], customized length up to 11 [m] available on request

Nr. Characteristic value / type1) Symbol Unit CS20-190 CS25-350 CS32-560 CH25-250 CH32-350 CR32-3401 Wrench size nut SW [mm] 36 41 46 41 46 462 Length nut LM [mm] 70 80 100 80 100 1003 Weight nut GM [kg] 0.08 0.11 0.15 0.11 0.15 0.154 Article No. nut [] 206020051036 206120051041 206220051046 206420051041 206520051046 2067200510465 Diameter plate DP [mm] 140 170 170 170 170 1706 Height plate HP [mm] 34 46 46 46 46 467 Weight plate GP [kg] 0.36 0.54 0.54 0.54 0.54 0.548 Article No. plate [] 206040021014 206140021017 206240021017 206440021017 206540021017 206740021017

1) Status: 2012-08, note: all values are subject to change; other designs and dimensions available on request; corresponding plates according to manufacturer specifications

Characteristic value / type1) Symbol Unit MNR-200 MNR-250 MNR-280 MNR-440 MNF-280 MNF-320 MNF-360Nominal diameter/dimensions Da.nom [mm] 16 19 20 25 40 x 7 40 x 8 40 x 9

Nominal weight 2) m [kg/m] 0.39 0.55 0.64 0.98 0.55 0.63 0.70Ultimate load bar 2) Fm.s.nom [kN] 200 250 280 440 280 320 360

Ultimate strength bar 3) Rm.s.nom [N/mm] 1,000 900 900 900 1,000 1,000 1,000Elongation bar 4) Agt [%] > 4 > 2

Ultimate load anchorage 4) Fm.a.nom [kN] 90 100 110 120 100 110 120

1) Status: 2012-08, note: all values are subject to change; other designs and dimensions available on request; corresponding plates according to manufacturer specifications2) Characteristic fractile value3) Modulus of elasticity: 40,000 [N/mm]4) According to manufacturer specifications

GRP Bars Type CS, CH, and CR

GRP Accessories Type CS, CH, and CR

GRP Round and Flat Bars Type MN

Specifications

5

Article No. Description Article Code Design ThreadDiameter [mm] 1)

(XXX diameter [mm]) 51 76

301080111XXXCross drill bit,

hardenedCB-Thread-D-HD R32 X X

301080121XXXCross drill bit,

with carbide insertsCB-Thread-D-HM R32 X X

301080211XXXButton drill bit,

hardenedBB-Thread-D-HD R32 X X

301080221XXXButton drill bit,

with carbide insertsBB-Thread-D-HM R32 X X

301080411XXXArc-shaped drill bit,

hardenedAR-Thread-D-HD R32 X X

301080511XXXArc-shaped drill bit,with carbide inserts

AR-Thread-D-HM R32 X X

301080811XXXArc-shaped button

drill bit, hardened

AB-Thread-D-HD R32 X

301080521XXXArc-shaped button

drill bit,with carbide inserts

AB-Thread-D-HM R32 X

1) X-marked fields indicate standard drill bit types; other dimensions available on request

Technical Features

Drill Bits

The success of the installation depends on the selection of the proper drill bit

Extensive drill bit portfolio for various ground conditions

Optimized in terms of cuttability and drilling

Adapted to the requirements of Civil Engineering and underground Mining

Further information on the characteristics and selection of drill bits is available in a separate DSI data leaflet for DYWI Drill Bits

Accessories

Characteristic value / type 1) Symbol Unit CS15-130 CR20-250Nominal diameter Da.nom [mm] 15 20

Nominal cross-section 2) S0 [mm2] 180 320Nominal weight 2) m [kg/m] 0.36 0.65

Ultimate load bar 3) Fm.s.nom [kN] 130 250Ultimate strength bar 4) Rm.s.nom [N/mm2] 1,000 1,000

Elongation bar 5) Agt [%] 2.5 2.5Shear force bar 5) FS.nom [%] 60 120

1) Status: 2012-08, note: all values are subject to change; other designs and dimensions available on request2) Characteristic fractile value3) Calculated from the characteristic ultimate strength value and nominal weight, rounded4) Modulus of elasticity: 40,000 [N/mm]5) According to manufacturer specifications

GRP Mesh

Steel accessories available on request

GRP rebars Fully threaded solid GRP bar Threading according to the demands for concrete reinforcing elements Connectors depending on the application Reinforcing cages available on request

GRP composite mesh Rock bolt mesh and rockfall nets available on request

6

Order Information 1)

Article Description 2) Article No.DYWIDAG GRP Solid Bar CS20-190, L = X,X00 [mm] 2060101910XXDYWIDAG GRP Solid Bar Nut CS20 206020051036DYWIDAG GRP Solid Bar Plate CS20, d. 140 [mm] 206040021014DYWIDAG GRP Solid Bar CS25-350, L = X,X00 [mm] 2061103510XXDYWIDAG GRP Solid Bar Nut CS25 206120051041DYWIDAG GRP Solid Bar Plate CS25, d. 170 [mm] 206140021017DYWIDAG GRP Solid Bar CS32-560, L = X,X00 [mm] 2062105610XXDYWIDAG GRP Solid Bar Nut CS32 206220051046DYWIDAG GRP Solid Bar Plate CS32, d. 170 [mm] 206240021017

DYWIDAG GRP Hollow Bar CH25-250, L = X,X00 [mm] 2064102510XXDYWIDAG GRP Hollow Bar Nut CH25 206420051041DYWIDAG GRP Hollow Bar Plate CH25, d. 170 [mm] 206440021017DYWIDAG GRP Hollow Bar CH32-350, L = X,X00 [mm] 2065103510XXDYWIDAG GRP Hollow Bar Nut CH32 206520051046DYWIDAG GRP Hollow Bar Plate CH32, d. 170 [mm] 206540021017

DYWIDAG GRP S-D Hollow Bar CR32-340, L = X,X00 [mm] 2067103410XXDYWIDAG GRP S-D Hollow Bar Nut CR32 206720051046DYWIDAG GRP S-D Hollow Bar Steel Nut CR32-S 206720022046DYWIDAG GRP S-D Hollow Bar Plate CR32, d. 170 [mm] 206740021017

1) Threadform according to ISO 102082) X,X ... variable length; couplings available on request

7

0434

6-1/

02.1

3-w

eb h

e

Please note: This brochure serves basic information purposes only. Technical data and information provided herein shall be considered non-binding and may be subject to change without notice. We do not assume any liabilityfor losses or damages attributed to the use of this technical data and any improper use of our products. Should you require further information on particular products, please do not hesitate to contact us.

ALWAG (AM 952/79), AT (AM 6138/2003), AT-SYSTEM (AM 6139/2003), DYWI (4197869), LSC (AM 4326/2008), OMEGA-BOLT (3258282), POWER SET (AM 6163/2002), and TUBESPILE (AM 4328/2008) are registered trademarks of DYWIDAG-Systems International GmbH.Combi Coat and CT-Bolt are trademarks of Vik rsta AS.DYWIDAG-Systems International GmbH is a partner of Vik rsta AS.

EMEADYWIDAG-Systems International GmbHAlfred-Wagner-Strasse 14061 Pasching/Linz, AustriaPhone +43-7229-610 49 0Fax +43-7229-610 49 80 E-mail alwag@dywidag-systems.atwww.alwag.com

North AmericaDSI Underground Systems Inc.9786 S Prosperity RoadWest Jordan, UT 84081, USAPhone +1-801-973 7169Fax +1-801-973 7172E-mail dsiunderground@dsiunderground.comwww.dsiunderground.com

South AmericaDSI Chile Industrial Ltda. Las Encinas #1387, Valle GrandeLampa, Santiago de Chile, ChilePhone +56-2-596 96 20Fax +56-2-596 96 69E-mail informaciones@dywidag-systems.clwww.dsi-chile.com

APAC/ASEANDYWIDAG-Systems International Pty. Ltd.25 Pacific HighwayBennetts Green, NSW 2290, AustraliaPhone +61-2-49 48 90 99Fax +61-2-49 48 99 56E-mail dsi@dywidag.com.auwww.dsiminingproducts.com/au

A u s t r i AA r g e n t i n AA u s t r A l i A

b e l g i u mb o s n i A A n d h e r z e g o v i n A

b r A z i lC A n A d A

C h i l eC o l o m b i A

C o s tA r i C AC r o At i A

C z e C h r e p u b l i Cd e n m A r k

e g y p te s t o n i AF i n l A n dF r A n C e

g e r m A n yg r e e C e

g u At e m A l Ah o n d u r A s

h o n g k o n gi n d o n e s i A

i tA lyJ A pA n

k o r e Al e b A n o n

l u x e m b o u r gm A l Ay s i A

m e x i C on e t h e r l A n d s

n o r w Ayo m A n

pA n A m ApA r A g u Ay

p e r up o l A n d

p o r t u g A lQ AtA r

s A u d i A r A b i As i n g A p o r e

s o u t h A F r i C As pA i n

s w e d e ns w i t z e r l A n d

tA i w A nt h A i l A n d

t u r k e yu n i t e d A r A b e m i r At e s

u n i t e d k i n g d o mu r u g u Ay

u s Av e n e z u e l A