university of pretoria · h coetzee 2001 heat transfer and pressure drop characteristics of angled...

UNIVERSITY OF PRETORIA

Revision date: 7 January 2016

1.1 GENERAL INFORMATION

Surname MEYER

First names

Josua Petrus

Citizenship South Africa Title Prof

Female

Male

X

Department

Mechanical and Aeronautical Engineering University of Pretoria

Position

Head of the Department of Mechanical and Aeronautical Engineering and Chair of the School of Engineering, University of Pretoria

Direct Telephone

(012) 420 3104

Fax (012) 362 5124

E-mail [email protected]

Date of appointment

1 July 2002

Permanent full-time

X

Temporary full-time

1.2 ACADEMIC QUALIFICATIONS OBTAINED

Degree/

Diploma Field of study Higher education institution Year Distinctions

BEng Mechanical Engineering

University of Pretoria 1984 Cum Laude

MEng

Mechanical Engineering

University of Pretoria 1986 Cum Laude

PhD Mechanical Engineering

University of Pretoria 1988 Not applicable

1. BIOGRAPHICAL SKETCH

mailto:[email protected]

2

1.3 PROFESSIONAL REGISTRATION

PrEng Professional registration as professional engineer (880217)

ECSA (Engineering Council of South Africa)

1988

1.4 SPECIALIZED COURSES

Duration

Topic Institution Year

10 weeks Leadership All Learn (Online learning consortium between Oxford, Stanford and Yale)

2004

3 days Leadership Programme

University of Pretoria Gordon Institute of Business Science (GIBBS)

2006

5 days Fundamentals of Microscale Heat Transfer

EPFL (Ecole Polytecnique Fédérale de Lausanne)

2011

1.5 WORK EXPERIENCE TO DATE

Name of employer Capacity and/or type of work Period

City Council of Pretoria Bus driver 1978/01/01 to 1979/12/31

University of Pretoria Undergraduate student 1979/01/01 to 1983/12/31

Laboratory for Advanced Engineering (LGI)

Associate 1984/01/01 to 1987/12/31

SADF and Compuflow Lieutenant in the South African Air Force and consultant respectively

1988/02/01 to 1989/12/31

North-West University Associate professor 1990/01/01 to 1990/12/31

North-West University Professor 1991/01/01 to 1993/12/30

North-West University Acting Head of Department 1993/01/01 to 1993/12/30

M-Tech, M-Tech Mechanical, MTech Software, Enerflow, Fabco, EPS, Cooling and Heating Technologies, and Randtech

Director, member, founder and/or CEO of a number of consulting engineering, manufacturing and software companies

1990/01/01 to 2002/06/30

University of Johannesburg Professor 1994/10/01 to 2002/06/30

University of Johannesburg Chairman (Head) Laboratory for Energy 1998/01/01 to 2002/06/30

University of Johannesburg Chairman (Head): Department of Mechanical Engineering

1999/01/01 to 2002/06/30

3

University of Pretoria Professor 2002/07/01 to present

University of Pretoria Head: Department of Mechanical and Aeronautical Engineering

2002/07/01 to 2006/12/31 (first term) 2007/01/01 to 2011/06/30 (second term) 2011/07/01 to 2015/06/30 (third term) 2015/07/01 to present (fourth term)

University of Pretoria Chair: School of Engineering 2004/01/01 to 2007/12/31 (first term) 2008/01/01 to 2011/12/31 (second term) 2012/01/01 to present (third term)

University of Pretoria Director: Advanced Engineering Centre of Excellence

2008/01/01 to 2013/12/31

4

PREPARATORY PROFESSIONAL EXPERIENCE BEFORE ACADEMIC CAREER

Laboratory for Advanced Engineering (LGI) Project work on a consultation basis to industry, mainly in finite elements and computational fluid dynamics. SADF and Compuflow On completion of my academic studies, I was conscripted into the South African Defence Force for two years (1988 – 1999). I was selected for officers’ training for three months. I was appointed as a commissioned officer with the rank of lieutenant in the South African Air Force at the Faculty of Military Science at the University of Stellenbosch in Saldanha. My main task was to teach aerodynamics and fluid mechanics to air-force pilots and navigators, and this occupied me for approximately 20 hours per week. For the rest of the time, I was a partner in a company (Compuflow together with Dr Hardus van Zyl) through which I did consultation work in computational fluid dynamics.

2. TEACHING ACTIVITIES

2.1 Courses presented

Course Level (e.g. second year, Masters) Self developed (Yes or No)

Aerodynamics (four times) 4th year Yes

Fluid Mechanics (six times) 3rd year Yes

Compressible Fluid Mechanics (four times)

4th year Yes

Thermodynamics (11 times)

2nd year Yes

Heat Transfer (19 times) 4th year Yes

Air-conditioning and Refrigeration (four times)

4th year Yes

Gas Dynamics (twice) Postgraduate level Yes

Computational Fluid Dynamics (twice) Postgraduate level Yes

Advanced Thermodynamics (three times) Postgraduate level Yes

Advanced Fluid Mechanics (four times) Postgraduate level Yes

Advanced Heat Transfer (12 times) Postgraduate level Yes

Advanced Air Conditioning and Refrigeration (six times)

Postgraduate level Yes

EXTERNAL EXAMINER (1995 - the present) Year

Course

University

1995 Thermodynamics MECN417 (Prof CJ Rallis) University of the Witwatersrand 1995 3 Final year projects (Prof GP Greyvenstein) North-West University 1995 Industrial Energy Management (Prof N Tully) University of the Witwatersrand 1996 Thermodynamics MECN417 (Prof CJ Rallis) University of the Witwatersrand 1996 6 Final year projects (Prof TJ Sheer & Prof EA Moss) University of the Witwatersrand 1996 Advanced Thermo systems (postgraduate level)

(Prof PG Rousseau) North-West University

1997 Industrial Energy Management (Prof N Tully) University of the Witwatersrand 1997 Thermodynamics MECN417 (Prof CJ Rallis) University of the Witwatersrand 1997 3 Final year projects (Prof CJ Rallis) University of the Witwatersrand 1997 4 Final year projects MEG426 (Prof GP Greyvenstein) North-West University

5

1997 Selected topics in refrigeration (postgraduate level) University of the Witwatersrand 1998 Heat and mass transfer (Prof N Tully) University of the Witwatersrand 1998 Fluid Dynamics (Prof T Moss) University of the Witwatersrand 1999 Fluid Dynamics (Prof P Rousseau) North-West University 1999 Thermodynamics (Prof CJ Rallis) University of the Witwatersrand 1999 Heat Transfer (Prof N Tully) University of the Witwatersrand 1999 Fluid Dynamics (Dr HJWP Neomagus) North-West University 1999 Final year project (Prof N Tully) University of the Witwatersrand 2000 Advanced Thermo systems (Prof PG Rousseau) North-West University 2000 Momentum transfer (Prof HJWP Neomagus) North-West University 2000 Fluid Dynamics (Prof CJ Rallis) University of the Witwatersrand 2001 Advanced Thermo systems (Prof PG Rousseau) North-West University 2001 Momentum transfer CEM312 (Prof HJWP Neomagus) North-West University 2002 Advanced Thermo systems (Prof PG Rousseau) North-West University 2002 Fluid Machines 414, Fluid Mechanics A314, Fluid

Mechanics B344, Heat Transfer 414, Thermodynamics B344 and Thermodynamics A244

University of Stellenbosch

2002 Thermo Systems TML4 University of Johannesburg 2002 Momentum transfer CEM312 (Prof HJWP Neomagus) North-West University 2002 Momentum transfer CEM312 (Prof HJWP Neomagus) North-West University 2003 Momentum transfer CEM312 (Prof HJWP Neomagus) North-West University 2004 Heat Transfer 4A (Ms LC Coblentz) University of Johannesburg 2004 Momentum transfer CEM312 (Prof HJWP Neomagus) North-West University 2005 Momentum transfer CEM312 (Prof HJWP Neomagus) North-West University 2006 Heat Transfer 4A (Prof A Nurick) University of Johannesburg 2006 Momentum transfer CEMI311 (Prof HJWP Neomagus) North-West University 2007 Military Technology 312/322/342 and 352

(Major J Geldenhuys Military Academy University of Stellenbosch

2007 Thermodynamics 3 ENME4TD (Prof S Govender) University of Kwa-Zulu Natal 2007 Design Project ENME4DP (Prof S Govender) University of Kwa-Zulu Natal 2007 Heat Transfer 4A (Prof A Nurick) University of Johannesburg 2007 Momentum transfer CEM312 (Prof HJWP Neomagus) North-West University 2007 Aircraft Mechanics 342

(Major J Geldenhuys) Military Academy University of Stellenbosch

2007 Design & Research Projects University of Kwazulu-Natal 2007 Aircraft Mechanics 342 (Major J Geldenhuys) Military Academy, University of Stellenbosch 2008 Heat transfer 4A (Prof A Nurick) University of Johannesburg 2008 Momentum transfer CEM312 (Prof HJWP Neomagus) North-West University 2009 Momentum transfer CEMI311 (BB Hattingh) North-West University 2009 Military Technology 312 (Lt. Col HJ Geldenhuys) Military Academy, University of Stellenbosch 2009 Gas Dynamics 322 (Lt. Col HJ Geldenhuys) Military Academy, University of Stellenbosch 2009 Heat Transfer MEGI412 (Dr M van Eldik) North-West University 2010 Transport Principles CEMI33 (B Hattingh) North-West University 2010 Heat Transfer INGM412 (Dr M van Eldik) North-West University 2010 Thermal-Fluid Systems MGI886 (Dr M van Eldik) North-West University 2011 Transport Principles CEMI311 (BB Hatingh) North-West University 2012 Heat Transfer INGM412 ( Dr M van Eldik) North-West University 2014-2016 Several modules University of Mauritius

RESEARCH Personal research and supervision of students Originally, my teaching and research interests were in computational fluid dynamics. During the period 1993 to 1994 it shifted to experimental thermal/fluid sciences with specific application to air-conditioning and refrigeration systems. To make this possible, I started specialising in fluid mechanics, thermodynamics and heat transfer - the main building blocks

6

that have to be integrated for developing new refrigeration and air-conditioning systems. The emphasis of my research at present is on enhanced heat transfer, convection heat transfer, and condensation heat transfer.

POSTGRADUATE SUPERVISION AND CO-SUPERVISION

Student name

Year

Title

Degree

WM Marx

1993

Minimizing of pressure losses in a fan drift-mine shaft intersection, using computational fluid dynamics

MEng

MP van Staden

1994

Development of an airflow model for a Lethabo steam boiler making use of computational fluid dynamics

MEng

F de V Arnoldi

1994

Simulation and performance tests of a water-to-water heat pump

MEng

DR de Basson

1994

Control strategy for optimal energy consumption at South African Universities and Technikons

PhD

MC Bekker

1995

Separation of solid-liquid suspensions with acoustic energy

MEng

TM Muya

1996

Hot water consumption in South African developed and developing communities

MEng

FJ Smit

1996

The influence of a non-azeotropic refrigerant mixture on the performance of a hot-water heat pump

MEng

SA Oerder

1996

The performance of a municipal water reticulation, ground-coupled, reversible heat pump

MEng

PPJ Vorster

1998

Wet compression versus dry compression in heat pumps working with pure refrigerants or non-azeotropic mixtures for different heating applications Vice-Chancellor Award (best dissertation)

MEng

W Swanepoel

1998

Wet compression versus dry compression in refrigeration cycles working with pure refrigerants or non-azeotropic mixtures for different cooling applications

MEng

JPM Bukasa

1999

Average boiling heat transfer and pressure drop coefficients of R22/R142b in a helically coiled water heated tube-in-tube heat exchanger

MEng

SA Kebonte

1999

Condensation heat transfer and pressure drop coefficients of R22/R142b in a water-cooled helically coiled tube-in-tube heat exchanger

MEng

CW Wood

1999

Design methodology and experimental verification used to optimize liquid overfeeding effects achieved with heat exchanger accumulators

MEng

7

R da Veiga

1999

Evaluation of a permanent magnet to decrease scale formation in a tube

Vice-Chancellor Award (best dissertation)

MEng

PJ Petit

1999

A steady-state model for the high-pressure side of a unitary air-conditioning

MEng

C Smith

2000

An evaluation of a magnetic physical water treatment device for the prevention of scale fouling in hot-water storage tanks

MEng

S van der Vyver

2000

The design, optimization and experimental verification of an accumulator heat exchanger

MEng

CA de Swardt

2000

A performance comparison between an air-source and a ground-source reversible heat pump

MEng

MP van Staden

2000

An integrated approach to transient simulation of large air-cooled condensers using computational fluid dynamics

PhD

WR da Veiga

2000

Heat transfer coefficient of a snow bag


MEng

H Coetzee

2001

Heat transfer and pressure drop characteristics of angled spiralling tape

MEng

S Coetzee

2001

The development of an experimental set-up to investigate heat transfer enhancement in tube-in-tube heat exchangers


MEng

E Krüger

2001

Comparison between CFD analysis and experimental work on heat exchangers

MEng

Z Shao

2001

Numerical and experimental evaluation of flow through perforated plates

MEng

N Denys

2002

The economic viability of a micro turbine cogeneration system

MEng

J Dirker

2002

Heat transfer coefficients in concentric annuli

M.Eng

L van der Hoek

2002

Data acquisition system for determining heat transfer coefficients in a heat pump

MEng

JPB Bukasa

2002

Heat transfer performance during condensation inside spiralled micro-fin tubes

PhD

8

W Louw

2002

The influence of annular tube contact in a helical-wound tube-in-tube heat exchanger

MEng

LC Coblentz

2002

Uncertainty analysis in heat exchanger applications

MEng

L Schreuder

2002

Characteristics of a plate heat exchanger under superheated conditions

MEng

AM Maluleke

2002

Optimal control versus conventional control strategies for ice-based thermal storage

M.Eng

JA Olivier

2003

Pressure drop during condensation inside smooth, helical microfin, and herringbone micro-fin tubes Vice-Chancellor Award (best dissertation), S2A3 medal by the South African Association for Scientific Achievements

M.Eng

R Da Veiga

2003

Development of a calcium carbonate scale formation experimental set-up for the evaluation of physical water treatment devices

PhD

WR Da Veiga

2003

Characteristics of a semicircular heat exchanger used in a water-heated condenser pump

PhD

L Liebenberg

2003

A unified prediction method for smooth and micro-fin tube condensation performance

Ph.D

FJ Smit

2003

Condensing coefficients of the refrigerant mixture R-22/R-142b in smooth tubes and during enhanced heat transfer configurations

PhD

H Van der Vyver

2003

Heat transfer characteristics of a fractal heat exchanger

PhD

J Bijkersma

2003

Pressure losses at the tubular inlet section of a low temperature differential heat exchanger

MEng

A Lambrechts

2004

Heat transfer performance during condensation inside smooth, micro-fin and herringbone tubes

MEng

D Owaga

2004

Flow patterns during refrigerant condensation in smooth and enhanced tubes Vice-Chancellor Award (best dissertation)

MEng

C Kotzé

2004

Direct contact brine-air heat exchanger characteristics

MEng

J Dirker

2004

Heat-extraction from solid-state electronics by embedded solids with application to integrated power electronics passive modules

PhD

Thianfu Ji

2005

Heat transfer enhancement during condensation in smooth tubes with helical wires inserts

PhD

9

NDL Burger

2006

Failure analysis of ultra-high molecular weight polyethylene acetabular cups

PhD

J Pattinson

2006

A cut-cell, agglomerated-multigrid accelerated, Cartesian mesh method for compressible and incompressible flow

MEng

M Christians

2007

Flow pattern-based heat transfer and pressure drop correlations for condensing refrigerants in smooth tubes

MEng

E van Rooyen

2007

Time-fractional analysis of flow patterns during refrigerant condensation (SASOL Merit Medal for the best Master’s degree)

MEng

CJ Visser

2008

Modelling heat and mass flow through packed pebble beds: A heterogeneous volume-averaged approach

MEng

S Govender

2008

Degree conferred on the basis of publications (36 international journal articles and 19 international conferences). Work was on heat and mass transfer in porous media on binary alloy solidification for both rotating systems and systems subjected to vibration.

DEng

OS Motsamai

2009

Optimization techniques for combustor design

PhD

Botha M

2009

A comparative study of Reynolds-averaged Navier-Stokes and semi-empirical thermal solutions of a gas turbine nozzle guide vane

MEng

Olivier JA

2010

Single-phase heat transfer and pressure drop of water cooled at a constant wall temperature inside horizontal circular smooth and enhanced tubes with different inlet configurations in the transitional flow regime

PhD

Meyers BC 2010 The experimental flowfield and thermal measurements in an experimental can-type gas turbine combustor

MEng

OI Ogunronbi 2011 Maximum heat transfer rate density from a rotating multiscale array of cylinders

MEng

S Schmitt 2011 Contraction heat transfer coefficient correlation for rectangular pin fin heat sinks

MEng

FU Ighalo 2011 Optimisation of microchannels and micropin-fin heat sinks with computational fluid dynamics in combination with a mathematical optimisation algorithm

MEng

Le Roux WG 2011 Maximum net power output from an integrated design of a small-scale open and direct solar thermal Brayton cycle

MEng

Mathebula IS 2012 Friction factor correlations for perforated tubes at low injection rates

MEng

10

Mowat AGB 2012 Modelling of non-linear aeroelastic systems using a

strongly coupled fluid-structure-interaction methodology

MEng

Smith L 2012 An interactive boundary layer modelling methodology for aerodynamic flows

MEng

Rehman S 2012 Wind power resource assessment, design of grid-connected wind farm and hybrid power system

PhD

Suliman R 2012 Development of parallel strongly coupled hybrid fluid-structure interaction technology involving thin geometrically non-liner structures

MEng

Hallquist M 2012 Heat transfer and pressure drop characteristics of smooth tubes at a constant heat flux in the transitional flow regime

MEng

Page LG 2012 Geometric optimization for the maximum heat transfer density rate from cylinders rotating in natural convection

MEng

Kempson WJ 2012 Optimising shaft pressure losses through computational fluid dynamic modelling

PhD

Grote K 2013 The influence of multi-walled carbon nanotubes on single-phase heat transfer and pressure drop characteristics in the transitional flow regime

MEng

Obayopo SO 2013

Performance enhancement in proton exchange membrane fuel cell – numerical modelling and optimisation

PhD

Olakoyejo OT 2013 Geometric optimisation of conjugate heat transfer in cooling channels with different cross-sectional shapes

PhD

Yekoladio PI 2013 Thermodynamic Optimization of Sustainable Energy System: Application to the Optimal Design of Heat Exchangers for Geothermal Power Systems

MEng

Van Zyl WR 2013 Single Phase Convective Heat Transfer and Pressure Drop Coefficients in Concentric Annuli

MEng

Stocks MD 2013 Geometric Optimisation of Heat Transfer in Channels using Newtonian and Non-Newtonian Fluids

MEng

Burger FH 2014 Three dimensional conductive heat spreading layouts obtained using topology optimisation for passive internal electronic cooling

MEng

Garach DV 2014 Heat transfer and pressure drop in microchannels with different inlet conditions for laminar and transitional flow of water

MEng

11

Jansen E 2014 Thermodydanic optimization of the open-air solar thermal Brayton cycle with fixed temperature constraints

MEng

Everts M

2015 Heat transfer and pressure drop of developing flow in smooth tubes in the transitional flow regime (S2A3 medal by the South African Association of Scientific Achievement for the best masters degree in the fileds of the natural sciences, medicine, and engineering submitted in 2014 and SASOL Merit Medal for the best Master’s degree)

MEng

Koorts JM 2015 Entropy minimisation and structural design for industrial heat exchanger optimisation

MEng

Nolte HC 2015 Analysis and optimisation of a receiver tube for direct steam generation in a solar parabolic through collector

MEng

Van der Westhuizen JE 2015 Investigation into using liquid crystal thermography as primary measurement technique for obtaining local wall temperature and heat transfer coefficients in tube-in-tube heat exchangers

MEng

Van Laar JH 2015 Microwave-plasma synthesis and nano-sized silicon carbide at atmospheric pressure

MEng

Yiannou A 2015 Nanofluid thermal conductivity “A themo-mechanical, chemical structure and computational approach”

MEng

Le Roux WG 2015 Thermodynamic optimisation and experimental collector of a dish-mounted small-scale solar thermal Brayton cycle

PhD

Mehrabi M 2015 Modelling and optimisation of thermophysical properties and convective heat transfer of nanofluids by using artificial intelligence methods

PhD

Mwesigye A 2015 Thermal performance and heat transfer enhancement of parabolic trough receivers – numerical investigation, thermodynamic and multi – objective optimisation

PhD

Vadasz JJ 2015 Vibration effects on natural convection in a porous layer heated from below with application to solidification of binary alloys

PhD

Coetzee N 2015 Heat transfer coefficients of smooth tubes in the turbulent flow regime

MEng

SP Olivier 2015 The influence of the inclination angle on void fraction and heat transfer during condensation inside a smooth tube

MEng

12

POST-DOCTORAL AND INTERNSHIP SUPERVISION AND CO-SUPERVISION

Dr T Bello-Ochende (Duke University)

2005/6

Heat transfer augmentation in heat sink channels

Post doctoral fellow

Dr S Lips (INSA of Lyon)

2010/2011

Experimental investigation of diabatic two-phase flows in inclined tubes


F Bocquet (INSA of Lyon)

2010 (six months)

Heat transfer in the transitional flow regime during a constant heat flux

MSc Internship

Dr G Dutta (IIT India Bombay )

2011/2012 Development of a thermal-hydraulic model to analyse an nuclear reactor loop


Dr P Nwosu (University of Nigeria)

2011/2012 Mathematical modelling and experimental investigation into thermal-fluid behaviour of nanofluids


Dr AO Adelaja (University of Lagos)

2013/2014 Condensation in inclined tubes Post doctoral fellow

Dr OT Olakoyejo (Obafemi Awolowo University)

2013 Geometric optimisation of conjugate cooling channels with different cross-sectional shapes


Dr L de Souza Martins PhD (Florida State University)

2013/2014 Optimal configuration for maximum current density from different types of fuel cells


J Montaut (INSA-Lyon)

2014 (six months)

The influence of surface roughness in transitional flow regime

MSc Internship

V Maillard (ENSMA)

2014 (six months)

Transition in coiled tubes MSc Internship

L Trebert (ISAE-ENSMA)

2015 (six months)

Artificial roughening of long tubes MSc Internship

M Motohoa (NRF)

2015/2016 (twelve month)

Phase change in refrigerants Internship after BTech

M Masamba (Michigan State University)

10 weeks Construction of heat exchanger equipment Internship as part of BS-degree

Research leadership

Chair of the Research Committee of the Faculty of Engineering of North-West University, 1990 to 1994.

Leader and initiator of the Research Group for Cooling and Heating Technology (RECOHET) at the University of Johannesburg. The research group consisted of 20 to 30 graduate students. I also initiated the building and construction of a new enhanced heat transfer laboratory for evaluating evaporation and boiling heat transfer characteristics of new refrigerants and zeotropic refrigerants. Most of the funding for this laboratory came from sources outside the university. The first experiments in this laboratory were carried out in June 1997.

Leader of the Thermoflow Research Group at the University of Pretoria. The research group consisted of about 50 graduate students and 8 staff members. Initiated the development and construction of two heat transfer

13

laboratories with several advanced experimental set-ups: tube-in-tube heat exchanger set-up, transitional flow set-up, annulus set-up, micro channel set-up, condensation in micro channel set-up, condensation set-up, carbon nanotube set-up and a pin fin set-up for turbine blades.

Conference Chair of the 1st International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, sponsored by the American Society of Mechanical Engineers (ASME) and the South African Institute for Mechanical Engineers (SAIMechE), 8 to 10 April 2002.

Conference Chair of the 2nd International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, sponsored by the Engineering Institute of Zambia, 23 to 26 June 2003.

Conference Chair of the 3rd International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 21 to 24 June 2004.

Conference Chair of the 4th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Cairo, Egypt, 19 to 22 September 2005.

Conference Chair of the 5th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Sun City, 1 to 4 July 2007.

Conference Chair of the 6th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Pretoria, 30 June to 2 July 2008.

Conference Chair of the 7th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Antalya, Turkey, 19-21 July 2010.

Conference Chair of the 8th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Mauritius, 8 – 11 July 2011.

Conference Chair of the 9th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Malta, 16– 18 July 2012.

Conference Chair of the Organising Committee of the 10th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Orlando, 14 – 16 July 2014.

Conference Chair of the 3rd Southern African Solar Energy Conference (SASEC2015), Kruger National Park, Skukuza, 11 – 13 May 2015.

Conference Chair of the Organising Committee of the 11th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Skukuza, 20 – 23 July 2015.

Research funding Research funding for the past few years only: For 2004: (R4.5 million) R60 000 (TESP) US$76 750 (ASHRAE with L Liebenberg and AG Malan) R1 800 000 (THRIP application with L Liebenberg and AG Malan)

R732 000 (NRF: 2003 to 2005) R1 231 200 (Pebble bed nuclear reactor/North West University together with A G Malan: 2004 to 2006) R114 000 (Kentron with A G Malan) R50 000 (Polish – South Africa collaboration)

For 2005: (R4.5 million) R732 000 (NRF: 2003 to 2005)

14

R80 000 (Eskom TESP) R50 000 (Eskom with L Liebenberg) R1 231 200 (Pebble bed nuclear reactor/North West University together with A G Malan: 2004 to 2006) US$76 750 (ASHRAE with L Liebenberg: 2004 to 2006) R543 000 (THRIP with L Liebenberg and A G Malan) R1 200 000 (SIMRAC: 2005/2006 with NDL Burger and J Dirker)

For 2006: (R4.5 million) R309 000 (NRF: for 2006 only)

R80 000 (Eskom TESP) R50 000 (Eskom with Liebenberg)

R1 231 200 (Pebble bed nuclear reactor/North West University together with A G Malan: 2004 to 2006) US$76 750 (ASHRAE with L Liebenberg: 2004 to 2006) R30 000 (Franke) R1 200 000 (SIMRAC: 2005/2006 with NDL Burger and J Dirker) R1 000 000 (THRIP with L Liebenberg and A G Malan) R50 000 International Science Co-operation grant with Poland

For 2007: (R2.04 million) R100 000 (Constructal Theory Workshop: Kumba Resources, SASOL and NRF) R80 000 (Eskom TESP) R845 587 (NACoE with L Liebenberg) R721 000 (THRIP) plus R1 020 000 (industry) R300 000 (NRF)

For 2008: (R4.48 million) R3 000 000 (DTI) R80 000 (Eskom TESP) R195 000 (NRF) (same amount per annum from 2008 to 2011) R720 000 (SANERI: Solar Thermal Power Generating Spoke hosted by UP and US)

R276 000 (NACoE with L Liebenberg) R210 000 (CSIR)

For 2009: (R5.4 million) R2 500 000 (DTI) R80 000 (Eskom TESP) R420 000 (CSIR: CFD) R364 710 (CSIR: Gas turbine research) R320 000 (EEDSM Hub) R106 500 (Armscor) R880 000 (SANERI/University of Stellenbosch) R275 000 (NRF) R422 571 (NACoE) R191 820 (ASHRAE) For 2010: (R2.4 million) R100 000 (Eskom TESP)

R880 000 (SANERI/University of Stellenbosch) R275 000 (NRF) R218 880 (CSIR: Gas turbine research) R342 000 (NACoE) R280 000 (EEDSM Hub) R350 000 (CSIR: Defence, Peace, Safety and Security)

For 2011: (3.2 million) R95 000 (Eskom TESP) R200 000 (NRF)

R350 000 (CSIR: Defence, Peace, Safety and Security) R469 970 (CSIR: Gas turbine research) R1 000 000 (SANERI/University of Stellenbosch) R400 000 (EEDSM Hub) R366 667 (National Aerospace Centre)

15

R380 000 (E_IRT: University of Pretoria) For 2012: (R2.1223 million) R650 000 (SANERI/University of Stellenbosch)

R196 000 (CSIR: Gas turbine research) R145 000 (Eskom TESP) R620 000 (EEDSM Hub) R366 667 (National Aerospace Centre) R145 000 (Eskom TESP) R80 000 (NRF) R200 000 (Energy_IRT)

For 2013: (2.88 million) R105 000 (Eskom TESP): Heat transfer research

R620 000 (EEDSM Hub): Energy efficient heat exchangers R80 000 (NRF) R750 000 (DST-NRF Renewable Energy Spoke): Heat exchangers R569 970 (CSIR): Pin-fin heat exchangers R366 667 (National Aerospace Centre): Using thermoflow in the manufacturing of more efficient and lighter aerospace equipment R295 000 (National Aerospace Centre): Fuselage optimization for a new aircraft configuration) R100 000 (Energy_IRT)

For 2014 and longer term R7.5 million: DST-NRF, Thermal solar spoke in partnership between the University of Pretoria and Stellenbosch University. The focus of the University of Pretoria is concentrating on heat exchangers. Total amount awarded is shared between the two universities, 2013-2017. R480 000: Algeria/South Africa Research Cooperation, Experimental and numerical investigation of refrigerant condensation in inclined tubes in the cooling towers of concentrated solar systems, 2014-2015. R195 000: Airbus and National Aerospace Centre, Gull-wing fuselage configuration to a wide body airliner and a two-seat sailplane, 2014-2015. R316 000: Airbus and National Aerospace Centre, Aircraft fuselage optimization in terms of fineness ratio, wake quality, lift and stability, 2014-2016. R510 000: RSES bursaries from the NRF for six students in renewable energy, 2014. R497 850: CSIR, Heat transfer research, 2014. For 2015 and longer term R130 000: Airbus, Aircraft fuselage optimization in terms of fineness ratio, wake quality, lift and stability, 2015 R50 000: Eskom TESP, heat transfer research, 2015. R1.3 million: Closed call renewable energy bursaries from the NRF for 14 masters and one PhD student, 2015. R1.2 million: Closed call renewable energy bursaries from the NRF for 13 masters and one PhD student, 2016. R23 million: The Royal Society, Africa Capacity Building Initiative between University of Pretoria, Imperial College, University of Mauritius, and the University of Lagos, (JP Meyer took the lead in proposal preparation and was assisted by Dr Jaco Dirker, UP share: R8 million), 2016 – 2020. Other Funding (for Department or School of Engineering and/or Chairs) For 2007:

R250 000 (PPS Refurbishment Sponsorship for CDIO lab)

16

R170 million (Department of Education for new buildings for Engineering, together with A Melck and RF Sandenbergh)

For 2009: R2.5 million (Department of Trade and Industry for Centre of Excellence in Advanced Engineering) R1.75 million/annum for five years (Two chairs in maintenance engineering sponsored by SASOL, Eskom, Anglo and Exxaro).

For 2010 R15.6 million (Department of Education for new equipment) For 2010 - 2014

R1.75 million/annum for five years (Two chairs in maintenance engineering sponsored by SASOL, Eskom, Anglo and Exxaro).

EXTERNAL EXAMINER THESES (1995 - the present)

Year

Degree, candidate & Supervisor

Title

University

1995

Du Plessis P DEng Prof L Pretorius

Mechanical oscillations on overhead transmission lines

University of Johannesburg

1995

Kleingeld M PhD Prof EH Mathews

Novel aspects of a national campaign on household energy savings

University of Pretoria

1995

Grobler LJ PhD Prof EH Mathews

A new holistic approach for HVAC retrofitting


1996

Lombard C PhD Prof EH Mathews

Two-port simulation of HVAC systems, an object-oriented approach


1996

Moodie JHR MEng Prof PG Rousseau

Development and integration of simplified mathematical models of chillers and air-conditioners for HVAC system simulation


1996

Weggelaar A MEng Prof EH Mathews

Verification, application and extension of a novel thermal simulation model


1997

MEng Sikder M Prof CJ Rallis

The design, fabrication and testing of a cyclone precipitator to provide particles of suitable sizes for uses in measuring the laminar burning velocity of premixed gases by means of laser doppler velocimetry

University of the Witwatersrand

1997

PhD Van Heerden E Prof EH Mathews

Integrated simulation of building thermal performance, HVAC system and control


1997

PhD Buys JH Prof EH Mathews

Integration of economic and performance analyses of HVAC systems


17

1997 MEng Kilfoil AM Prof EA Moss

Water flushing of rock chips from horizontal holes drilled by rotary percussion


1997

MEng Arndt DC Prof EH Mathews

Further extension, verification and application of integrated building, HVAC system and control simulation


1998

MEng Thom MG Prof TJ Sheer

Performance evaluation of a desiccant-evaporative cooling air-conditioning system


1998

MEng Taylor PB Prof EH Mathews

Enhancing the energy efficiency of houses and geysers


1999

MEng

Pretorius CA

Prof PG Rousseau

Simulation of non-azeotropic heat pump performance

North-West University

2001

MEng MF Geyser Prof EH Mathews

New technology for ESCO analysis


2002

M.Eng PW Jordaan Prof PG Rousseau

Determining the potential impact of a micro heat pump for domestic water heating


2002

M.Eng HJ van Antwerpen Prof GP Greyvenstein

An investigation into the viability of using turbines for simultaneous secondary pressure regulation and energy recovery in mine- cooling water systems


2003

PhD CP Botha Prof EH Mathews

Simulation of the human energy system


2003

PhD R Els Prof EH Mathews

Energy evaluations and load shift feasibility in South African mines


2003

M.Eng DT Claassen Prof EH Mathews

New procedures to reduce cost in HVAC systems


2004

PhD M den Boef Prof EH Mathews

Assessment of the national DSM potential in mine underground services


18

2004 PhD W den Heijer Prof GJ Grobler

An integrated approach to implement and sustain energy efficiency and greenhouse gas mitigation in SA


2004

MEng GJ Martins Prof LJ Grobler

A methodology to identify, quantify and verify the cost benefits of energy and process improvements on a ferro-metal production plant


2004

MEng JC Olivier Prof GP Greyvenstein

Network modeling of transient heat exchanger performance


2005

PhD W Bouer Prof EH Mathews

Designing a dynamic integrated thermal and energy system simulation scheme for cross industry applications


2005

PhD WF Fuls Prof M Kleingeld

Development of a novel interim bulk fuel storage facility for the PBMR


2005

MEng G du Plessis Prof PG Rousseau

Evaluation of alternative sanitary water heating configurations for demand side management


2008

MSc Z Essa Dr F Inambao

Experimental and theoretical analysis of heat transfer on a transonic blade

University of Kwazulu-Natal

2008

Doctoral degree C T’Joen Prof M De Paepe

Thermo-hydraulic study of inclined louvered fins

University of Ghent

2010 M.Eng. P van Zyl Venter Dr M Van Eldik

A supercritical R-744 heat transfer simulation implementing various Nusselt number correlations


2011 PhD

H Huisseune Prof M De Paepe

Performance evaluation of louvered fin compact heat exchanger with vortex generators

University of Ghent

2012

PhD AK Pandey Dr MR Nandgaonkar

Investigation of DI diesel engine for military and disaster management vehicles using different alternative fuel

University of Pune

2013

MScEng MC Page MJ Brooks and Prof LW Roberts

Modelling and experimental validation of a loop heat pipe for terrestrial management applications

University of KwaZulu-Natal

2013 MScEng Design and performance analysis of University of KwaZulu-Natal

19

NM Mutombo Dr FL Inambo Prof G Bright

hybrid photovoltaic-thermal grid connected system for residential application

2013 PhD

PR Dhamangaonkar Dr. M. R. Nandgaonkar

To develop a predictive tool for boiler tube failure

University of Pune

2013 MEng

JA Mulder Dr M van Eldik

Simulation and evaluation of flow boiling heat transfer correlations for R-744


2014 PhD

B Ameel Prof M de Paepe Prof J Vierendeels

Optimisation of compound louvered fin and vortex generator heat exchangers

University of Ghent

2014 PhD

E Luwaya Prof FD Yamba Dr PC Chisale

Improvement of conversion efficiency of charcoal kiln using a numerical method

University of Zambia

2014 PhD

R Kaul Design and fabrication of a centrifugal pump of low specific speed through proper design, analysis and optimization through CFD for validation of work

University of Pune

2014 PhD

JI Gonzalez Prof RG Gordon Dr OG Valladares

Heat transfer study in annular spaces with the helical wire insert.

University of Cuba

2015 PhD

BRR Singh Dr SV Prabhu Dr A Agrawal

Experimental and numerical studies of flow and heat transfer in twisted square ducts

Indian Institute of Technology, Bombay

2015 MEng

MN Ras Prof M van Eldik

A method for the seasonal performance rating of residential water heating heat pump

Nort-West University

2015 PhD

ST Latibari Dr A Andriyana

Encapsulation of organic phase change materials within metal oxides for thermal energy storage systems

University of Malaya

20

INVOLVEMENT Company

Position

Description of services

M-Tech Mechanical

Director from 1990 to 1994, CEO during 1993.

General consulting in mechanical engineering concentrating on computational fluid dynamics. A few other development and manufacturing projects (e.g. air knives).

M-Tech Software

Founder and CEO from 1992 to 1994. Sold the company in 1994.

Marketing of technical software, concentrating on the ANSYS finite element programme.

Enerflow CC

Director from 1992 - 2000.

Developing, manufacturing and marketing 5 ranges of heat pumps (286 different models).

Fabco Technologies (Pty) Ltd

Director from 1993 until 1994. CEO during 1993.

Multi-disciplinary engineering (consulting, turnkey projects, energy audits, etc.). Associated companies were: CDS Electrical Engineers, M-Tech Mechanical, Enerflow, FRAD and Fabco Trading.

EPS Consulting Engineers

Founder and CEO (1994 to 2002).

Energy Performance Contracting projects.

Cooling and Heating Technologies

Founder and CEO (1994 to 2002).

Consulting in air-conditioning and refrigeration.

Randtech Founder and CEO (2000 – 2002). General consulting in mechanical engineering for staff at the University of Johannesburg.

Commissions and committees (Universities)

University of North-West, Research Committee, 1990 - April 1994, chairperson.

University of North-West, Special Committee on the Revision of the Guidelines for the writing of mini-dissertations, dissertations and theses, member, 1990.

University of North-West, Senate Commission, Special Committee writing a document: “Guidelines for study leaders and supervisors for master’s and doctoral students and guidelines for examination”, member, 1992.

University of North-West , Executive Committee of the Faculty of Engineering, member by representing Mechanical Engineering as Acting Head, October 1992 - November 1993.

University of Johannesburg, Committee on determining the views of undergraduate students on the Faculty of Engineering, member, 1995.

University of Johannesburg, Committee on changing from laboratory system to full departmental systems, 1997 – 1999.

University of Johannesburg, Committee on upgrading and modernising media equipment for lecture rooms,

4. MEMBERSHIPS, CONTRIBUTIONS TO SOCIETIES, JOURNALS, COUNCILS,

COMMISSIONS, SEMINARS, RESEARCH VISITS, ETC.

3. INDUSTRY EXPERIENCE

21

1998.

University of Johannesburg, developing of an energy course, curricula, and study guides, material, etc. for a Diploma in Technology Education, 1999-2000.

University of Johannesburg, Dean’s committee, 1999 – 2003.

University of Johannesburg, Ethics committee of Senate, 2001 – 2003.

University of Johannesburg, Committee for the development of a new educational model, 2001 – 2002.

University of Pretoria, Research Committee, Faculty of Engineering, 2003 – 2010.

University of Pretoria, Senate, July 2002 – present.

University of Pretoria, Member of the Managing Committee of the Faculty of Engineering, Built Environment and Information Technology, 2004 – present.

University of Pretoria, Facilities Management Committee, 2005 – 2008.

University of Pretoria, Chair of Mathematics Committee, 2007 - present.

University of Pretoria, User Client Committee for New Engineering Building, 2009 – 2011. Research/promotion evaluation/reviewer (articles excluded)

Member NRF/Vaal Triangle Technikon Programme Advisory Committee, 2000 – present.

NRF Committee to evaluate research at Vaaldriehoek Technikon, 2000, 2001.

NRF, International Science Liaison, evaluation of applications, keynote speakers, 6 February 2003.

University of Durban-Westville, Promotions Committee, 14 February 2003.

NRF Review Committee, post-doctoral fellowship applications, 2003 – 2005.

NRF, Evaluation of International Science Liaison Grants, 2003 – 2005.

NRF, Evaluation of research proposal for NRF Technikon Programme, 2003.

Innovation Fund, technical evaluator, 2003, 2005.

The Royal Society, United Kingdom, Research grants, June 2004.

NRF peer rating, 2004 to the present. Evaluating the quality of research outputs and standing of researchers.

The Royal Society, United Kingdom, Research grants, August 2006.

Czech Science Foundation, Project Proposal, June 2008.

University of Ghent, Research infrastructure, September 2009.

The Royal Society, United Kingdom, Research grants, March 2010.

Research Foundation Flanders, Research grants, March 2011.

McMaster University, Ontario, Canada, Promotions, June 2011.

National Commission for Scientific and Technological Development (CONICYT) and the Superior Council of the National Fund for Scientific & Technological Development (FONDECYT), Chile, October 2011.

University of Ghent, Promotions, March 2012.

NRF, SARCHI chair reviewer, October 2012.

Research Foundation Flanders (FWO), March 2013, July 2013.

Expert reviewer for research projects for the Qatar National Research Fund (QNRF), 2014, 2015.

University of the Witwatersrand, screening committee for promotion to professor, October 2013.

Imperial College London, Evaluation of candidate for promotion, February 2014.

NRF, member of Specialist Committee for Engineering, assessment panel for rating of researchers, July 2014 – February 2018.

NRF, Specialist Committee for Engineering, assessment panel for rating of researchers, 2014 – 2017.

NRF, Specialist Committee for Engineering (Convenor), assessment panel for rating of researchers, 2015 and 2016.

University of Johannesburg. Selection committee to evaluate the appointment of Distinguished Professors, September 2015.

Natural Sciences and Engineering Research Council of Canada (NSERC), reviewe of research proposal, December 2015.

Accreditations and external evaluations

Member of accreditation team (Engineering Council of South Africa), University of Durban-Westville (1996): Mechanical Engineering programme.

Member of accreditation team (Engineering Council of South Africa), University of Durban-Westville (2000):

22

Mechanical Engineering programme.

Member of external evaluations panel, University of Stellenbosch (2002): Faculty of Military Science, Department of Aeronautics.

Member of accreditation team (Engineering Council of South Africa), University of Cape Town (2001): (Mechatronics programme).

Member of paper accreditation team (Engineering Council of South Africa), University of Stellenbosch (2001): (Mechatronics programme).

Member of accreditation team (Engineering Council of South Africa), University of Natal (2003): (Mechanical engineering programme).

Member (team leader) of external evaluations panel, University of Stellenbosch (2005): School of Science and Technology.

Member of accreditation team (Engineering Council of South Africa), University of Stellenbosch (2005): (Mechatronics engineering programme).

Member of accreditation team (Engineering Council of South Africa), University of Stellenbosch (2006): (Mechatronics engineering programme).

Member (team leader) of accreditation team, (Engineering Council of South Africa), University of North-West (2006): (Mechanical Engineering programme).

Member of accreditation team (Engineering Council of South Africa), Nelson Mandela Metropolitan University (2007): (Mechatronics engineering programme).

Member (team member) of accreditation team, (Engineering Council of South Africa), University of the Witwatersrand (2007): (Mechanical, Aeronautical and Industrial Engineering programmes).

Member of International Advisory Board, Department of Mechanical Engineering, Polytechnic of Namibia.

Member (team leader) of accreditation team, (Engineering Council of South Africa), University of KwaZulu-Natal (2008): (Mechanical programme).

Member (team leader) of accreditation team, desk audit, University of Namibia, (2010): (Mechanical engineering programme).

Member (team leader) of accreditation team, (Engineering Council of South Africa), University of Cape Town (2010): (Mechanical programme).

Member (team leader) of accreditation team, (Engineering Council of South Africa), University of North-West (2011): (Mechanical programme).

Member (visit leader and team member) of accreditation team, (Engineering Council of South Africa), University of KwaZulu-Natal, (2011): (Mechanical programme).

Member of accreditation team, (Engineering Council of South Africa), University of Cape Town, (2012): (Mechatronics programme).

Member of accreditation team, (Engineering Council of South Africa), North-West University, (2013): (Mechanical programme).

Advisory boards

Member of the International Advisory Committee of Kalasalingam University, India, 2011.

Professional engineering committees

Member of the Professional Advisory Committee (PAC) of the Engineering Council for South Africa (ECSA), 11 April 2002 to the present and Vice-chair since 2013 to the present.

Member of the Professional Engineers: Qualifications and Examinations Committee (EPQEC), of the Engineering Council of South Africa (ECSA), April 2004 to the present.

Editor, guest editor, editorial boards, etc.

Aeronautica Meridiana, Member of Editorial Committee, 1991- the present.

Aeronautica Meridiana, Guest Editor for 1992 issue.

Research and Development Journal, Member of Editorial Advisory Board, 1990 - 1994.

Heat Transfer Engineering, Member of Editorial Advisory Board, 2001 – present.

Guest Editor, Heat Transfer Engineering, Special annual issues on HEFAT conferences, 2003, 2004, 2005 and 2008.

Associate Editor, Heat Transfer Engineering, 2002 – the present.

23

Editor, Experimental Heat Transfer, 2005 – the present.

Editorial Board, Energy and Buildings, 2005 – 2007.

Advisory Editor, Science & Technology of Nuclear Installations, 2006 - the present.

Editorial Board member, International Review of Mechanical Engineering (IREME), 2006 - the present.

Editorial Board member, International Review on Modelling and Simulations (IREMOS), 2008 - the present.

Guest Editor, Experimental Heat Transfer, Special issue on HEFAT2005 conference, 2007.

Member of handbook committee of ASHRAE TC1.3 on content of ASHRAE Fundamentals 2009, chapter on Fundamentals, 2008.

Editorial Board member, International Journal of Emerging Multidisciplinary Fluid Sciences, 2008 - the present.

Guest Editor, Heat Transfer Engineering, Selected papers from the HEFAT2008 conference in Pretoria in 2008, Vol. 32, No. 2, 2011.

Member of the International Advisory Board, International Journal of Applied Engineering, (IJAE), 2011 – the present.

Guest Editor, Computational Thermal Sciences, special issue on the International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Vol. 5, No 2, 2013.

Guest Editor, Computational Thermal Sciences, special issue on the International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Vol. 5, No 3, 2013.

Associate (Lead) Editor/Editorial Board Member, Journal of Porous Media, 2013 - present

Associate (Lead) Editor/Editorial Board Member, Special topics & Reviews in Porous Media – An International Journal, 2013 – present.

Editorial Board member, International Journal on Energy Mix Infrastructure, 2014 – present.

Editorial Board member, Heat Exchangers, 2014 – present.

Guest Editor, Heat Transfer Engineering, special issue on Selected Papers at the 9th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2012), Vol. 35, 2014.

Member of the Editorial Advisory Board, Thermal Science and Engineering Progress, 2015 – present. Professional societies

American Institute of Aeronautics and Astronautics (AIAA), Membership number: 85539, Member 1990 – 1995, 2005 – present.

Aeronautical Society of South Africa (Division of the Royal Aeronautical Society), Membership number 1368200, 1990 – 1995, Fellow, 2005 – present.

South African Institution of Mechanical Engineers (SAIMechE), Membership number: 132060, Member 1985 – 1997, Fellow 1997 - the present.

American Society of Heating Refrigeration and Air Conditioning Engineers (ASHRAE), Membership number: 05084535, Member 1993 - the present.

American Society of Mechanical Engineers (ASME), Membership number: 4032447, Member 1992 - 2007, Fellow 2007 - present,

South African Institute of Refrigeration and Air Conditioning (SAIRAC), Membership number: 2486, Member 1999 – the present.

Council member of the Aeronautical Society of South Africa (AeSSA), 2005 – 2014. Vice-president, 2009 – 2011.

South African Academy of Engineering (SAAE), Fellow, 2006 – the present.

International Institute of Refrigeration (IIR), Member, 2008 - the present.

Society of Satellites Professional International (SSPI), 2010 – the present. Conference committees

National Computational Fluid Mechanics Conference, member of organising committee, 1990.

Chairperson for morning session on Transonic flow, Second National CFD Conference, Vereeniging, 1991.

Session chairperson at the International Symposium on Economic Modelling, London, 1991.

Session chairperson at the Seventh International Conference on Numerical Methods in Transonic Problems, Stanford, 1991.

Morning session chairperson at a one-day Maintenance Forum in Johannesburg, 1991.

Session chair: ASME_ZSITS International Thermal Science Seminar, Slovenia, 2000

Session chair (2X): Conference on Applied Mechanics, Durban, SACAM, 2000

24

Lead Scientist: 5th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, Thessalonica, Greece, 2001.

Session chairperson, 5th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, Thessalonica, Greece, session on condensation, 2001.

Member of the Conference Scientific Committee for the Compact Heat Exchanger symposium (A Festschrift on the 60th Birthday of Ramesh K Shah), IHTC Grenoble, France, 24 August 2002.

Chair of organising committee, First International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, HEFAT2002, Skukuza, Kruger National Park, South Africa, 300 papers, 8 to 10 April 2002.

Member of the Assembly of World Conferences on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics (expire after the 7th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics).

Member of the European Scientific Committee for the Compact Heat Exchanger Conference, Crete, September/October 2003.

Member of the Scientific Advisory Board for the 2nd Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems, 15 – 20 June 2003, Croatia.

Member of the International Scientific Committee for the 3rd International Symposium on Computational Heat Transfer, Norwegian fjords, 19 – 24 April 2004.

Lead Scientist, Assembly of World Conferences on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, 3rd International Symposium on Two-Phase Flow Modelling and Experimentation, Pisa, Italy, 22 – 24 September 2004.

Member of the Organising committee and International Forum on Heat Transfer, Heat Transfer Society of Japan, Kyoto, Japan, 24 – 26 November 2004.

Member of the organizing committee, SACAM04, Fourth South African Conference on Applied Mechanics, 18 – 21 January 2004.

Member of the International Scientific Committee, 5th International Symposium on Multiphase Flow, Xi'an, China, 2005.

Chair of organising committee, Second International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, HEFAT2003, Livingston, Zambia, 150 papers, 23 to 25 June 2003.

Member of the Scientific Committee, ASME_ZSITS International Thermal Science Seminar, Slovenia, 13 – 16 June 2004.

Member of the Student Program Track Leader, ASME and JSME, 12th International Conference on Nuclear Engineering, Arlington, Washington, DC, 25 – 29 April 2004.

Member of the International Scientific Committee, 7th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, PRES 2004, Prague, Czech Republic, 22 – 26 August 2004.

Lead Scientist of the Sixth World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics (ExHFT-6), Matsushima, Japan, 17 – 21 April 2005.

Chair of organising committee, Third International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, HEFAT2004, Cape Town, 150 papers, 21 to 24 June 2004.

Member of the Scientific Advisory Board of 2005 Dubrovnik Conference, 5 – 11 June 2005.

Member of the Conference Scientific Committee, Heat Transfer in Components and Systems for Sustainable Energy Technologies: Heat-SET 2005, Grenoble, France, 5-7 April 2005.

Member of the Scientific Committee of the Fifth International Conference on Enhanced, Compact and Ultra-Compact Heat Exchangers: Science, Engineering and Technology sponsored by ECI of New York, Whistler, British Columbia, Canada, September 12-16, 2005.

Chair of organising committee, Fourth International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, HEFAT2005, Cairo, Egypt, 400 papers, 19 to 22 September 2005.

Member of Scientific Committee of Special Session on Single and Two-phase Natural Circulation, 3rd IASME/WSEAS International Conference on Heat Transfer, Thermal Engineering and Environment, Corfu, Greece, 20 – 22 August 2005.

Member of the Scientific Committee, Assembly for International Heat Transfer Conferences.

Member of the International Scientific Committee, 9th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, PRES 2006, Prague, Czech Republic, 27 – 31 August 2006.

25

Member of the Scientific Advisory Board of the 4th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems, 4- 8 June 2007.

Member of the International Scientific Committee, 10th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, PRES 2007, Ischia Island, Gulf of Naples, 24 – 27 June 2007.

Session Chair, 13th International Heat Transfer Conference (IHTC-13), Sydney, 13 - 18 August 2006.

Member of the Scientific committee, Heat Transfer in Components and Systems for Sustainable Energy Technologies Conference (Heat-SET 2007), Chambery, France, 18-20 April 2007.

Chair of organising committee, Fifth International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, HEFAT2007, Sun City, South Africa, 150 papers, 1 to 4 July 2007.

Member of the International Scientific Committee, WSEAS Conference on Fluids and Heat and Mass Transfer, Vouliagmeni Beach, Crete, Greece, 25-27 August 2007.

Coordinating Scientist for the International Heat and Mass Transfer Conference, 19th National and 8th ISHMT-ASME HMT Conference, Hyderabad, India, 3-5 January 2008.

Member of Scientific Committee, ECOS’08, Krakow, Poland, 2008.

Member of the International Advisory Committee on Computational Mechanics, Sun City, 7 to 11 January 2009.

Lead Scientist of the Seventh World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics (ExHFT-7), Krakow, 28 June to 3 July 2009.

Member of the International Scientific Committee, 6th International Symposium on Multiphase Flow, Heat, Mass Transfer, and Energy Conversion, Xi’an Jiaotong University, 11 to 15 July 2009.

Member of the Scientific Committee, International Workshop on Hydrogen, Rabat, Morocco, 29 - 30 October 2009.

Member of the Scientific Committee of ICCHMT 09, 6th International Conference on Computational Heat and Mass Transfer, Guangzhou, China, 18 - 21 May 2009.

Chair of organising committee, Sixth International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, HEFAT2008, Pretoria, 150 papers, 30 June to 2 July 2008.

Member of the Scientific Advisory Board of the Dubrovnik 2009 Conference on Sustainable Development of Energy, Water and Environmental Systems, 30 September – 3 October 2009.

Conference Chair of the 7th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2010), Antalya, 450 papers, 19 – 21 July 2010.

Coordinating Scientist of the ASME and the Indian Society of Heat and Mass Transfer (ISHMT), IIT Bombay, January 2010.

Member of the Scientific Committee, 11 th UK National Heat Transfer Conference, September 2009.

Session Chair: 7th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, Krakow, Poland, 28 June – 3 July 2009.

Member of the Assembly of World Conferences on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics (expire after the 9th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics).

Member of the International Steering Committee, International Conference on Mechanical Engineering – ICOME, Naples, Italy, 8 – 10 June 2010.

Member of the International Steering Committee, Clean Energy Technologies and Energy Efficiency for Sustainable Development, ENERCON 2010, Dehradun, India, 25 – 27 June 2010.

Session chair and co-chair (twice) at the 14th International Heat Transfer Conference (IHTC-14), Washington, 8 – 13 August 2010.

Session chair at the CHISA 2010 Conference, Prague, 31 August 2010.

Member of the International Advisory Committee, International Conference on Thermal Energy and Environment, India, 24 – 27 March 2011.

Member of the International Advisory Committee, Second African Conference on Computational Mechanics, Cape Town, 5 – 8 January 2011.

Member of the Scientific Advisory Board, Conference on Sustainable Development of Energy, Water and Environmental Systems, Dubrovnik, 2011.

Member of the International Advisory Committee, International Conference on Thermal Energy and Environment, INCOTEE 2011, Kalasalingam University, India, 24 – 26 March 2011.

Member of the International Scientific and Advisory Committee, International Workshop on Heat Transfer

26

Advances for Energy Conservation and Pollution Control (IWHT’2011), Xi’an, Shaanxi, 18 – 21 October 2011.

Member of the International Advisory Committee, International Conference on Energy, Economy and Environment, National Institute of Technology Calicut, India, December 2011.

Member of the Scientific Committee, 8th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, Lisbon, 24 – 27 June 2013.

Member of the International Scientific Committee of the 60th anniversary of the AV Luikov Heat and Mass Transfer Institute of the National Academy of Sciences of Belarus, 13 September 2012.

Conference Chair of the 8th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2011), Pointe Aux Piments, Mauritius, 150 papers, 11 – 13 July 2011.

Member of the Scientific Advisory Board, 7th Conference on Sustainable Development of Energy, Water and the Environmental Systems, Ohrid, Macedonia, 1 – 6 July 2012.

Member of the Scientific Advisory Board and member of the organizing committee, Third International Forum on Heat Transfer (IFHT2012), Nagasaki, 13 – 15 November 2012.

Member of the Advisory Committee of the Energy and Materials Research Conference (EMR2012), Torremolinos (Spain), 20-22 June 2012.

Chair of keynote speaker, International Symposium on Advances in Computational Heat Transfer, CHT12, Bath, 1– 6 July 2012.

Member of the International Organizing Committee, 7th International Symposium on Multiphase Flow, Heat Mass Transfer and Energy Conversion (ISMF2012), State Key Laboratory of Multiphase Flow in Power Engineering, Xi’an Jiaotong University, 26 – 30 October 2012.

Member of the International Scientific Advisory Board, Technologies for Sustainable Development (ICERTSD 2013), West-Bengal, 7 – 9 February 2013.

Member of the International Scientific Committee, 4th International Micro and Nano Flow Conference (MNF2013), Edinburg University, 21 – 23 August 2013.

Member of the International Advisory Board, 2nd Annual Convention on Climate Change and Water, Suresh Gyan Vihar University, Jagatpura, India, November 2013.

Coordinating Scientist of the 22nd ISHMT and 11th ASME Heat and Mass Transfer Conference, Indian Institute of Technology Kharagpur, December 2013.

International Advisory Board of the Conference SGVU-C3W 2013, Jaipar, October 2013.

Member of the International Advisory Board of the International Conferences on Advances in Mechanical Engineering, Penu, 29 – 31 May 2013.

Member of the Organising Advisory Committee of the Second Southern Africa Energy Conference (SASEC2014), 27 – 29 January 2014.

Member of the Scientific Committee, Constructal Law Conference, Nanjing, China, 14-15 October 2013.

Session chair, Interdisciplinary areas in heat and fluid flow, 8th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, Lisbon, 16 – 20 June 2013.

Session chairs on Bioenergy and enhanced heat transfer, Fifth International Conference on Applied Energy (ICAE2013), Pretoria, 2 – 4 July 2013.

Member of the Advisory Committee, Symposium on Engineering & Technology (ISET-2014), Trinity College of Engineering and research, Pune, India, 9 -10 January 2014.

Regional Editor of the International Heat Transfer Conference, Japan, 10 – 15 August 2014.

Member of the International Advisory Committee, Second International Conference on Applications of Fluid Dynamics, (ICAFD-2014), S.V. University, Tirupati, India, 21-23 July 21-23 2014.

Member of the Scientific Committee of the 4th Micro and Nano Flows Conference, University College London, 7-10 September 2014.

Member of the International Scientific Committee, Sixth International Symposium on Advances in Computational Heat Transfer, New Brunswick, NJ, 25 – 29 May 2015.

Member of the Scientific Committee of the 9th Constructal Law and Second Law Conference, Parma, Italy, 18 - 19 May 2015.

Member of the International Advisory Committee, International Conference on Energy Systems and Developments 2015 (ICESD 2015) Trinity College of Engineering and research, Pune, India, 11-13 February 2015.

Member of the International Scientific Committee, International Conference on Materials and Energy (ICOME), Morocco, 19 – 22 May 2015.

27

Coordinating Scientist, Biennial Heat and Mass Transfer conference in association with ASTFE and ICHMT, Trivandrum, 17-20 December 2015.

Member of the organizing Committee of the 4th International Forum on Heat Transfer (IFHT2016), Heat Transfer Society of Japan, Sendai, Japan, 2 – 4 2016.

Member of the International Advisory Committee, Second International Conference on Thermal Energy and Environment, INCOTEE 2016, Kalasalingam University, India, 25 – 26 March 2016.

External research supervision

Christophe T’Joen, PhD, member of external guidance committee, University of Ghent, 2005. Technical committees

Department of Mineral and Energy Affairs - Launching committee for the development of computer software for the design of energy-efficient buildings, 1992 and 1993.

Corresponding member of the Technical Committee TC1.4 (Heat Transfer) of the American Society of Heating, Refrigeration and Air-Conditioning Engineers (ASHRAE), 1998 - 2004

Corresponding member of the Technical Committee TC8.4 (Air to refrigerant heat transfer equipment) of the American Society of Heating, Refrigeration and Air-Conditioning Engineers (ASHRAE), 1998 - the present.

Corresponding member of the Technical Committee TC8.5 (Liquid to refrigerant heat transfer equipment) of the American Society of Heating, Refrigeration and Air-Conditioning Engineers (ASHRAE), 1998 – 2002.

International member of the Technical Committee TC8.5 (Liquid to refrigerant heat transfer equipment) of the American Society of Heating, Refrigeration and Air-Conditioning Engineers (ASHRAE), 2002 - the present.

International member of the Technical Committee TC1.4 (Heat Transfer) of the American Society of Heating, Refrigeration and Air-Conditioning Engineers (ASHRAE), 2004 - the present.

Board member of the Department of Trade and Industry-sponsored, National Aerospace Centre of Excellence (NACoE), 2006 – 2009.

Organisation of short courses

Compact heat exchangers, Dr R Shah, Delphi Harrison Thermal Systems, General Motors Corporation, 18 – 19 April 2000.

Evaporative cooling towers for industrial and refrigeration applications, Dr Paul Erens, Industrial Water Cooling, 5 – 6 June 2000.

Solar Systems – Opportunities for competitive products, Dr Henry Healey, Florida Alternative Corporation, 1 – 2 November 2000.

Reliability-centred Maintenance, Jasper L Coetzee, M-Tech , 13 – 15 March 2001.

Delivering customer value – reengineering at the interface, Dr Kelvin Kemm and Joe Aspinall, STRATEK , 23 – 24 April 2001.

Maintenance Fundamentals for Maintenance and Production Executives, Jasper L Coetzee and Pieter-Jan Vlok, 24 – 26 May 2001.

Eco-labelling and industrial manufacturing, Dr Kelvin Kemm and Joe Aspinall, STRATEK, 8 – 9 May 2001.

Problem solving skills for maintenance practitioners, Jasper L Coetzee and Ronel Kotzé, M-Tech, 15 – 17 May 2001.

The environmental challenge to industry, Dr Kelvin Kemm and Mr Leon Louw, STRATEK, 29 – 30 May 2001.

Project management, Deon Kruger, University of Johannesburg, 6 – 8 June 2001.

Maintenance fundamentals for maintenance and production executives, Jasper L Coetzee, M-Tech, 5 – 7 June 2001.

Technology and economics, Dr Kelvin Kemm and Leon Louw, STRATEK, 12 – 13 July 2001.

Lateral thinking and problem-solving in industry, Dr Kelvin Kemm and Leon Louw, STRATEK, 19 – 20 July 2001.

Project management, Deon Kruger, University of Johannesburg, 18 – 20 September 2001.

The First Southern Hemisphere Workshop on Constructal Theory and Design in Nature and Engineering, Adrian Bejan, Sylvia Lorente, Tunde Bello-Ochende, Antonio Reis and Antonia Miguel, University of Pretoria, 2 March 2007.

28

Research visits

JSPS (Japan Society for the Promotion of Science) fellowship, Kyushu and Kobe Universities, Japan, 13 March 2004 to 2 April 2004.

Research seminars by invitation

Heat Transfer Society of Japan, The characterisation of flow regimes during refrigerant condensation in smooth and enhanced tubes: power spectral density distribution of pressure signals, Kyushu University, Japan, March 2004.

Kobe University, Kobe University, Japan, The characterisation of flow regimes during refrigerant condensation in smooth and enhanced tubes: power spectral density distribution of pressure signals, March 2004.

University of Illinois, Condensation flow regime maps during refrigerant condensation, June 2005.

EPFL, Switzerland, Overview of thermoflow research at the University of Pretoria, November 2008.

University of Ghent, Belgium, Single phase heat transfer and pressure drop inside horizontal tubes with different inlet configurations for transitional flow, November 2008.

International rankings

Times Higher Education’s World University Rankings via Thomson Reuters, participates in the review, 2011 – present.

REFEREEING MANUSCRIPTS FOR JOURNALS/PUBLICATION

Aeronautica Meridiana April 1991 Aeronautica Meridiana May 991 International Journal of Building and Environment May 1991 International Journal of Building and Environment May 1991 International Journal of Building and Environment June 1991 International Journal of Building and Environment August 1991 Water SA February 1992 Research and Development Journal April 1992 International Journal of Building and Environment April 1992 Heat Transfer Engineering May 1992 Research and Development Journal July 1992 International Journal of Numerical Methods for Heat and Fluid Flow November 1992 Water SA December 1992 Energy - The International Journal January 1993 Aeronautica Meridiana January 1993 AIAA March 1993 Heat Transfer Engineering May 1993 Water SA May 1993 International Journal of Building and Environment July 1993 International Journal of Energy Research March 1994 Energy Conversion and Management April 1994 AIAA May 1994 Heat Transfer Engineering January 1994 Energy - The International Journal March 1994 International Journal of Energy Research April 1994 Energy, Conversion and Management July 1994 Heat Transfer Engineering August 1994 International Journal for Energy Research March 1995 Energy - The International Journal October 1995 Heat Transfer Journal February 1996 International Journal of Refrigeration April 1996 Energy Conversion and Management November 1996 Heat Transfer Engineering March 1997 Research and Development Journal April 1999

29

Research and Development Journal June 1999 Journal of Enhanced Heat Transfer July 1999 International Journal of Applied Thermodynamics March 2000 Research and Development Journal January 2001 Research and Development Journal April 2001 Research and Development Journal April 2002 ASHRAE Transactions August 2002 Applied Thermal Engineering August 2002 Heat Transfer Engineering November 2002 ASHRAE Transactions November 2002 ASHRAE Transactions January 2003 Experimental Heat Transfer May 2003 R & D Journal June 2003 Heat Transfer Engineering December 2003 Journal of Heat Transfer January 2004 Journal of Heat Transfer February 2004 Heat Transfer Engineering March 2004 Journal of Heat Transfer March 2004 Applied Thermal Engineering May 2004 Experimental Heat Transfer September 2004 Heat Transfer Engineering November 2004 Journal of Heat Transfer December 2004 Journal of Heat Transfer January 2005 Energy – The International Journal February 2005 Solar Energy Journal May 2005 Electronic Packaging June 2005 Experimental Heat Transfer July 2005 Journal of Heat Transfer August 2005 Journal of Heat Transfer October 2005 Applied Thermal Engineering November 2005 Experimental Thermal and Fluid Science December 2005 Journal of Heat Transfer January 2006 Energy - The International Journal February 2006 Applied Thermal Engineering April 2006 Energy - The International Journal May 2006 Heat Transfer Engineering June 2006 International Journal of Refrigeration August 2006 Journal of Heat Transfer August 2006 Journal of Heat Transfer September 2006 International Journal of Heat and Mass Transfer September 2006 Applied Thermal Engineering November 2006 Experimental Heat Transfer December 2006 Applied Thermal Engineering December 2006 Applied Thermal Engineering January 2007 Applied Thermal Engineering April 2007 International Journal of Energy Technologies and Policy (IJETP) April 2007 International Journal of Thermal Sciences July 2007 Solar Energy August 2007 Chemical Engineering and Processing: Process Intensification November 2007 International Journal of Thermal Sciences March 2008 The Open Thermodynamics Journal April 2008 Experimental Thermal and Fluid Science June 2008 Energy - the International Journal June 2008 International Journal of Thermal Sciences September 2008 International Journal of Thermal Sciences November 2008 International Journal of Thermal Sciences December 2008

30

Computational Thermal Sciences December 2008 Experimental Thermal and Fluid Science January 2009 Computational Thermal Sciences January 2009 International Journal of Thermal Sciences January 2009 Computational Thermal Sciences June 2009 Experimental Thermal and Fluid Science June 2009 International Journal for Numerical Methods in Fluids July 2009 Energy – the International Journal July 2009 International Journal of Heat and Mass Transfer July 2009 AIAA: Journal of Thermophysics and Heat Transfer September 2009 Heat and Mass Transfer November 2009 Experimental Heat Transfer January 2010 Applied Thermal Engineering June 2010 Heat and Mass Transfer June 2010 Applied Thermal Engineering July 2010 Applied Thermal Engineering September 2010 International Journal of Multiphase Flow January 2011 International Journal of Heat and Mass Transfer May 2011 Microgravity – Science and Technology May 2011 Heat and Mass Transfer June 2011 International Journal of Heat and Mass Transfer September 2011 International Journal of Thermal Sciences November 2011 International Journal of Heat and Mass Transfer November 2011 Experimental Thermal and Fluid Science December 2011 Numerical Heat Transfer February 2012 International Journal of Multiphase Flow April 2012 Journal of Molecular Liquids July 2012 International Journal of Thermal Sciences August 2012 International Journal of Thermal Sciences September 2012 Heat Transfer Engineering October 2012 International Journal of Heat and Mass Transfer October 2012 Heat Transfer Engineering November 2012 International Journal of Heat and Mass Transfer November 2012 Heat Transfer Engineering March 2013 International Journal of Thermal Sciences March 2013 Oil & Gas Science and Technology-Revue d'IFP Energies nouvelles February 2014 Applied Energy October 2014 International Journal of Refrigeration November 2014 Applied Thermal Engineering December 2014 Heat and Mass Transfer December 2014 Heat Transfer Engineering January 2015 International Communications in Heat and Mass Transfer February 2015 International Journal of Thermal Sciences March 2015 ASME Journal of Solar Energy Engineering March 2015 International Journal of Thermal Sciences August 2015 International Journal of Thermal Sciences November 2015

Academic awards (as student)

University colours from the University of Pretoria for Academic Achievement, 1986 and 1988. Medals

5. AWARDS

31

General Service medal from the South African Defence Force for the period 1988 and 1989 for "defending the Republic of South Africa in the conservation of life, health and property”.

Research fellowships

Fellowship grant in 2004 from the Japan Society for the Promotion of Science (JSPS), to conduct research in Japan. Granted only to senior scientists, university professors, and other persons with substantial professional experience.

Teaching awards

At the North-West University, twice received a Special Award for Teaching on the basis of “proven excellent teaching”. This award, named the “VERKA Award” is only awarded every three years and I received it consecutively for 1990 and 1993.

Lecturer of the year, Faculty of Engineering, University of Johannesburg, 2000.

Nomination for a Teaching Innovation Award, University of Pretoria, 2006 and 2008. Education awards

Africa Leadership Award (Education): “Outstanding professionals who have the vision, flair, acumen, and professionalism to demonstrate excellent leadership and management skills in an organization, making changes and achieving results”, Stars of the Industry Group, 10 December 2014.

Diversity award

AIRBUS diversity award: Diversity in engineering education, shortlisted in the top ten, 21 August 2015. Academic awards

University of Pretoria Exceptional Achiever (four times): Senior academics who have already achieved professional status and who have maintained continuous exceptional achievement in the fields of under- and postgraduate teaching and learning, research, community service and administration, and who enjoy exceptionally high stature among their peers (for the periods 2004 to 2006, 2007 to 2009, 2010 to 2012, and 2013 to 2015).

Best Professor in Mechanical and Aeronautical Engineering. For: “This award of the highest stature is presented to an individual who has surpassed several levels of its excellence and set an example of being a role model of exemplary leadership. An individual behind the institution who is building his institution through leadership, innovation, academic and industry interface and a supreme objective of building future leaders”, World Education Congress, Mauritius, 27 November 2013.

Presigous lectures

MEYER JP; Heat transfer in the transitional flow regime, I2CNER seminar series for first-rate researchers, International Institute for Carbon-neutral Energy Research, Kyushu University, 8 August 2014.

Best article awards

Thomas Price Award in 1988. Awarded by the South African Institute of Mechanical Engineers for original research published in the 1986 issue of the Research and Development Journal.

Rand Coal Award in 1994 together with WM Marx (postgraduate student). Awarded by the South African Institute of Mechanical Engineers for original research published in 1993 in the Research and Development Journal.

South African Institute of Mechanical Engineers Bronze Medal for 1998 together with S van den Vyver. Awarded by the Institute for original research published in 1997 in the Research and Development Journal for the paper entitled “Heat transfer augmentation in the annulus of a heat exchanger consisting of a round tube inside a twisted square tube”.

South African Institution of Mechanical Engineers, LT Campbell-Pitt Award for 1999, together with H Herman. Awarded by the Institute for original research published in 1998 in the Research and Development Journal for the

32

paper entitled “Heat transfer augmentation of a spiralled tube inside the annulus of a tube-in-tube heat exchanger”.

Silver Medal Award (2001) of the South African Institution of Mechanical Engineering together with two students (S Coetzee and W da Veiga) for the best paper published in 2000 in the Research and Development Journal entitled: “Condensation in an annulus with spiralled wires”.

Literati Network Awards for Excellence 2008. Outstanding Paper Award Winner for the best of 40 papers published in 2007 in the International Journal of Numerical Methods for Heat & Fluid Flow: (DIRKER J, MALAN AG and MEYER JP; Thermal characterization of rectangular cooling shapes in solids, International Journal of Numerical Methods for Heat and Fluid Flow, Vol. 17, No. 4, pp. 361 - 383, 2007).

Applied Energy ICAE2013 Best Paper Award for: MWESIGYE A, BELLO-OCHENDE T and MEYER JP; Heat transfer and thermodynamic performance of a parabolic through receiver with centrally placed perforated plate inserts, Applied Energy, Vol. 136, pp. 989 – 1003, 2014. Award ceremony at the International Conference on Applied Energy, Abu Dhabi, 28 March 2015.

Best paper awards at conferences

Outstanding paper award for the best paper in the session on “Thermodynamics, Heat and Mass Transfer III” presented to Olakoyejo O, Bello-Ochende T and Meyer JP for the paper “Geometric optimization of forced convection in a vascularised material”, Proceedings of the 8th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Pointe Aux Piments, Mauritius, pp. 666 - 674, 11 – 13 July 2011.

Outstanding paper award for the best paper in the session on “Thermodynamics, Heat and Mass Transfer III” presented to Meyer JP and Hallquist M for the paper “Heat transfer coefficients for laminar to turbulent flow in tubes at constant heat flux”, Proceedings of the 8th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Pointe Aux Piments, Mauritius, pp. 675 - 680, 11 – 13 July 2011.

Outstanding paper award for the best paper in the session on “Heat Exchangers 2” presented to Garach DV, Dirker J and Meyer JP for the paper “Heat transfer and pressure drop in microchannels with different inlet conditions for water in the laminar and transitional flow regimes” Proceedings of the Ninth International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2012), Malta, pp. 763 - 770, 16 – 18 July 2012.

Outstanding paper award for the best paper in the session on “Heat and Mass Transfer 5” presented to Vadasz J, Meyer JP, Govender S, and Ziskind G for the paper “Vibration effects on heat transfer during solidification of paraffin”, Proceedings of the Ninth International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2012), Malta, pp. 1139 - 1147, 16 – 18 July 2012.

Outstanding paper award for the best paper in the session on “Experimental Methods” presented to Van der Westhuizen JE, Dirker J and Meyer JP for the paper “Investigation into using liquid crystal thermography for measuring heat transfer coefficients and wall temperature profiles at inlets and underdeveloped regions”, Proceedings of the 10th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2014), Orlando, pp. 732 – 740, 14 – 16 July 2014.

Outstanding paper award for the best paper in the session on “Solar Energy 1” presented to Le Roux WG, Bello-Ochende T and Meyer JP; Optimisation of an open rectangular cavity receiver and recuperator used in a small-scale solar thermal Brayton cycle with thermal losses, Proceedings of the 10th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2014), Orlando, pp. 499 – 507, 14 – 16 July 2014.

Best paper at conference: ALAM MM, REHMAN S, AL-HADHRANI LM, RUSSEL M and MEYER JP; Quantifying the contributions of different time-scales to wind speed using wavelets, Proceedings of the International Conference on Mechanical Industrial and Energy Engineering, paper number ICMIEE-PI-140386, Khulna, Bangladesh, 25 – 26 December 2014.

33

Outstanding paper award for the best paper in the session on “Concentrated Solar Power” presented to Rungasamy A, Craig K and Meyer JP; Receiver optimization for an Etendue conserving compact linear Fresnel, Proceedings of the Third Southern African Solar Energy Conference, Skukuza, Kruger National Park, pp. 266 - 271, 11 – 13 May 2015.

Outstanding paper award for the best paper in the session on “Solar Thermal (Heat transfer)” presented to Everts M and Meyer JP; Heat transfer characteristics of developing flow in the transitional flow regime of a solar receiver tube, Proceedings of the Third Southern African Solar Energy Conference, Skukuza, Kruger National Park, pp. 224 - 229, 11 – 13 May 2015.

Outstanding paper award for the best paper in the session on “Solar Thermal (Heat transfer and fluid mechanics) presented to Le Roux W, Meyer JP and Bello-Ochende T; Experimental testing of a tubular cavity receiver for a small-scale solar thermal Brayton cycle, Proceedings of the Third Southern African Solar Energy Conference, Skukuza, Kruger National Park, pp. 295 - 300, 11 – 13 May 2015.

Outstanding paper award for the best paper in the session on “Concentrated Solar Power” presented to Marais M, Craig K and Meyer JP; Computational investigation of worst-case wind loads on a heliostat pod for different reflector aspect ratios, Proceedings of the Third Southern African Solar Energy Conference, Skukuza, Kruger National Park, pp. 525 - 530, 11 – 13 May 2015.

Outstanding paper award for the best paper in the session on “Convection heat transfer” presented to GARBADEEN ID, SHARIFPUR M, SLABBER J and MEYER JP; Numerical study on natural convection of MWCNT nanofluids in an enclosure based on experimental conductivity an viscosity, Proceedings of the 11th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2015), Skukuza, pp. 493–498, 20 – 23 July 2015.

Student awards by research supervision

Vorster PPJ, Vice-Chancellor Award for best dissertation, University of Johannesburg, 1998.

Da Veiga R, Vice-Chancellor Award for best dissertation, University of Johannesburg, 1999.

Da Veiga WR, Vice-Chancellor Award for best dissertation, University of Johannesburg, 2000.

Coetzee S, Vice-Chancellor Award for best dissertation, University of Johannesburg, 2001.

Olivier JA, Vice-Chancellor Award for best dissertation, University of Johannesburg, 2001.

Olivier JA, S2A3 medal by the South African Association of Scientific Achievement for best master’s degree, 2001.

Owaga D, Vice-Chancellor Award for best dissertation, University of Johannesburg, 2003.

Van Rooyen E, SASOL Merit Medal for the best Master’s degree, 2007

Everts M, Winner of the 2013 Eskom Academic Award for University Students (one national award per annum), 2013.

Everts M, S2A3 medal by the South African Association of Scientific Achievement for best master’s degree, 2015.

Everts M, TATA PhD Africa Scholarship in Science, Engineering and Technology recognizing outstanding ability and potential in research, (three national awards), 2015.

Awards from professional societies

Thomas Price Award in 1988. Awarded by the South African Institute of Mechanical Engineers for original research published in the 1986 issue of the Research and Development Journal.

Rand Coal Award in 1994 together with WM Marx (postgraduate student). Awarded by the South African Institute of Mechanical Engineers for original research published in 1993 in the Research and Development Journal.

South African Institute of Mechanical Engineers Bronze Medal for 1998 together with S van den Vyver. Awarded by the Institute for original research published in 1997 in the Research and Development Journal for the paper entitled “Heat transfer augmentation in the annulus of a heat exchanger consisting of a round tube inside a

34

twisted square tube”.

South African Institution of Mechanical Engineers, LT Campbell-Pitt Award for 1999, together with H Herman. Awarded by the Institute for original research published in 1998 in the Research and Development Journal for the paper entitled “Heat transfer augmentation of a spiralled tube inside the annulus of a tube-in-tube heat exchanger”.

Silver Medal Award (2001) of the South African Institution of Mechanical Engineering together with two students (S Coetzee and W da Veiga) for the best paper published in 2000 in the Research and Development Journal entitled: “Condensation in an annulus with spiralled wires”.

Chairman’s Award of the South African Institute for Refrigeration and Airconditiong (SAIRAC) for “Siminal research contributions over the past 25 years in the field of heat transfer with specific reference to the understanding and quantification of: (1) heat pumps, (2) optimum geometries of enhanced tubes, (3) the influence of different types of inlets on transition, and (4) condensation heat transfer at different inclination angles. All of this work is directly related to the development of more energy efficient equipment, which is widely used today in the air conditioning and refrigeration industry”, 22 August 2015.

6. STANDING AS A RESEARHER

National Research Foundation evaluations

Evaluated in 1992 by the Foundation of Research Development as a Y-class researcher. These acknowledged researchers (normally younger than 35 years of age) who obtained their doctoral degrees not more than five years prior to evaluation and who, on the basis of their performance as researchers during their doctoral studies and/or early post doctoral research careers, as indicated by their research outputs, are recognised as showing promise of establishing themselves as researchers within a five-year period after evaluation.

Evaluated in 1996 by the Foundation of Research Development as an established C2 researcher who, as individual or member of a team, produces research outputs of an international standard as judged by the science, engineering or technology community, either internationally or locally.

Evaluated in 2001 by the Foundation of Research Development as an established C1 researcher who, as individual or member of a team, produces research outputs of an international standard as judged by the science, engineering or technology community, either internationally or locally. A C1 category is described as: “While all reviewers concur that the candidate is an established researcher (as described), some of them indicate that he/she already enjoys considerable international recognition for his/her high quality research outputs. (Researchers on the borderline between B and C fall into this group.)”

Evaluated in 2006 by the Foundation of Research Development as an established B2 researcher who enjoys considerable international recognition for the high quality and impact of their recent research outputs.

Evaluated in 2011 by the Foundation of Research Development as an established B1 researcher who enjoys considerable international recognition for the high quality and impact of their recent research outputs.

Indicators

Essential Science Indicators of ISI Web of Knowledge: ranked amongst the top 1% of the world in engineering in three fields: (a) citations, (b) number of papers and (c) citations per paper, 3 February 2014 - present.

35

ORCID nr: 0000-0002-3675-5494 Scopus Author ID: 7406101417 Patents registered 1. MEYER JP, Multi Channel Random Selector, Patent no. 90/4245, 1990. 2. MEYER JP and DE WET JM, Evaporation action cooling unit, Patent no. 93/9393, 1993. 3. MEYER JP and COETZEE H, Twisted strip heat exchanger, Patent 99/5561, 2000. 4. MEYER JP, Heat exchanger with truncated pyramid-shaped projections, Patent 99/7399, 2000. 5. MEYER JP and VAN DER VYVER S, Round tube inside a twisted square tube, heat exchanger, Patent

99/7400, 2000. 6. MEYER JP and VAN DER VYVER H, Heat transfer augmentation of a spiralled tube inside the annulus of a

tube-in-tube heat exchanger, Patent 99/7401, 2000. 7. MEYER JP, Fractal heat exchanger for optimum enhanced heat transfer, Patent 99/7398, 2000. Research reports 1. MEYER JP, MUYA T and VISAGIE J; Potential for hot-water heating with heat pump reticulation in the

domestic sector - techno-economic study, Report no: EO9517, Department of Mineral and Energy Affairs, February 1996.

2. MEYER JP; A strategy for the development of an energy performance contracting industry in South Africa,

Report no. EDBV9607, Department of Mineral and Energy Affairs, 1997. 3. COETZEE PP and MEYER JP; Evaluation and development of physical water treatment process for reduction

of CaCO3 scale, WRC Report No. 836/1/02, 2002. 4. MEYER JP, LIEBENBERG L and OLIVIER JA; Measurement and evaluation of single-phase heat transfer and

pressure drop inside enhanced tubes for transition flow, ASHRAE (American Society of Heating, Refrigerating and Air-Conditioning Engineers, Report nr: 1280-RP, 204 pages, August 2008. http://rp.ashrae.biz/page/ASHRAE-D-RP1280-20090922.pdf

Book chapters 1. MEYER JP; Heat pumps, International Encyclopaedia of Heat and Mass Transfer, Edited by HEWIT GF,

SHIRES GL and POLEZHAEV YV, CRC Press, New York, pp. 562-564, 1997.

2. MEYER JP; Evaluation of energy efficient and environmentally acceptable pure and zeotropic refrigerants in air-conditioning and refrigeration, Edited by BEJAN A, VADÁSZ P and KRÖGER DG, Energy and the Environment, Kluwer Academic Publishers, Dordrecht, pp. 239 – 246, 1999.

3. COETZEE S, DA VEIGA WR and MEYER JP; Condensation of R22 during heat transfer augmentation with spiralled wires in the annulus of a tube-in-tube heat exchanger for hot-water heat pumps, Edited by Shah, R.K., Begell house, pp. 377-384, 1999.

7. RESEARCH OUTPUTS

http://rp.ashrae.biz/page/ASHRAE-D-RP1280-20090922.pdf

36

4. MEYER JP and OLIVIER JA; Heat transfer in the transitional flow regime, Chapter 12, Edited by AHSAN A,

Evaporation, Condensation and Heat Transfer, InTech, pp. 245 – 260, 2011.

5. BELLO-OCHENDE T, OLAKOYEJO OT and MEYER JP; Constructal design of rectangular conjugate cooling channels, Edited by Rocha LAO, Lorente S and Bejan A, Constructal Law and the Unifying Principle of Design, Springer, New York, pp. 177 – 194, 2013.

6. MEYER JP and TANG CC; Convective heat transfer of nanofluids in tubes, Edited by SMS Murshed and CN de Castro, Nanofluids: Synthesis, Properties and Applications, Nova Science Publishers, Chapter 7, pp. 155 – 192, 2014.

Articles published in peer-reviewed accredited journals 1. MEYER JP; A method to predict the effective cleaning of milk pipe-lines, Research and Development Journal,

Vol. 2, No. 1, pp. 16-18, 1986. 2. MEYER JP and MATHEWS EH; A transformed Laplace equation for the numerical solution of various

mechanical engineering problems, The International Journal for Mechanical Engineering Education, Vol. 15, No. 1, pp. 41-50, 1987.

3. MEYER JP; Computational fluid flow, The South African Mechanical Engineer, Vol. 37, No. 5, pp. 223-228,

May 1987. 4. MATHEWS EH and MEYER JP; Numerical modelling of wind loading on a film clad greenhouse, Building and

Environment; The International Journal of Building Science and its Applications, Vol. 22, No. 2, pp. 129-134, 1987.

5. MATHEWS EH, MEYER JP, VISSER JA and CROSBY CP; Numerical prediction of wind loads on buildings,

Journal of Wind Engineering and Industrial Aerodynamics, Vol. 31, pp. 241-250, 1988. 6. MEYER JP, MATHEWS EH and VAN ZYL GP; Numerical calculation of profiles corresponding to given

pressure distributions, Communications in Applied Numerical Methods, Vol. 3, No. 2, 1988. 7. MATHEWS EH, CROSBY CP, VISSER JA and MEYER JP; Numerical prediction of wind loads on buildings,

Journal of Wind Engineering and Industrial Aerodynamics, Vol. 13, pp. 241-250, 1988. 8. MATHEWS EH and MEYER JP; Computation of wind loads on a semicircular greenhouse, Journal of Wind

Engineering and Industrial Aerodynamics, Vol. 29, pp. 225-233, 1988. 9. MEYER JP; Numerical prediction of viscous and turbulent flow around a projectile in the transonic flow regime,

Aeronautica Meridiana Journal, Vol. 8, pp. 75-83, 1990. 10. GREYVENSTEIN GP and MEYER JP; The viability of heat pumps for the heating of swimming pools in South

Africa, Energy - The International Journal, Vol. 16, No. 7, pp. 1031-1037, 1991. 11. MEYER JP, LE GRANGE LA and MEYER C; The utilization of air scoops for the improvement of ventilation in

a coal mine heading, International Journal of Mining Science and Technology, Vol. 13, pp. 17-24, 1991. 12. MEYER JP and GREYVENSTEIN GP; The heating of swimming pools in South Africa: a techno-economic

analysis between heat pumps and solar heating, Research and Development Journal, Vol. 7, No. 1, pp. 26-31, 1991.

13. MEYER JP and GREYVENSTEIN GP; Hot water for homes in South Africa with Heat Pumps, Energy - The

International Journal, Vol. 16, No. 7, pp. 1039-1044, 1991.

37

14. GREYVENSTEIN GP and MEYER JP; Influence of price changes on the viability of heat pumps for heating water in South African homes, International Journal of Energy Conversion and Management, Vol. 33, No. 1, pp. 41-49, 1991.

15. MEYER JP and GREYVENSTEIN GP; The influence of an increase in electricity tariffs on the viability of heat

pumps against direct heating for large consumers of hot water in South Africa, International Journal of Energy Economics, Vol. 13, No. 4, pp. 238-245, 1991.

16. MEYER JP and GREYVENSTEIN GP; Hot water for large residential units, hospitals and laundries with heat

pumps in South Africa: a techno-economic analysis, International Journal of Energy Conversion and Management, Vol. 33, No. 2, pp. 135-144, 1991.

17. VAN STADEN MP and MEYER JP; The influence of nose radius modification on the lift to drag ratio of an

NACA64-006 wing section, Aeronautica Meridiana, Vol. 9, 1991. 18. MATHEWS EH, VAN DER WALT NW and MEYER JP; A numerical design procedure for subsonic nozzles,

Aeronautica Meridiana, Vol. 9, 1992. 19. MEYER JP and GREYVENSTEIN GP; The drying of grain with heat pumps in South Africa, International

Journal of Energy Research, Vol. 16, No. 1, pp. 13-20, 1992. 20. MEYER JP and GREYVENSTEIN GP; Hot water for large residential units, hospitals and laundries with heat

pumps in South Africa; a techno-economic analysis, Energy Conversion and Management, Vol. 33, No. 2, pp. 135-143, 1992.

21. MEYER JP and GREYVENSTEIN GP; Influence of price changes on the viability of heat pumps for water

heating in South Africa, Energy Conversion and Management, Vol. 33, No. 1, pp. 41-49, 1992. 22. MEYER JP; The behaviour of a non-circular cylinder with and without strakes in cross-flow, Aeronautica

Meridiana, Vol. 10, 1992. 23. MEYER JP and MARX WM; The minimizing of pressure losses in a fan drift-mine shaft intersection, using

computational fluid dynamics, Research and Development Journal, Vol. 9, No. 3, pp. 1-7, 1993. 24. LE GRANGE LA, GREYVENSTEIN GP, DE KOCK WJ and MEYER JP; A numerical model for solving

polymer melt flow, Research and Development Journal, Vol. 9, No. 2, pp. 12-17, 1993. 25. GREYVENSTEIN GP and MEYER JP; The cost-effectiveness of heat pumps in specific buildings in South

Africa, International Journal of Energy Research, Vol. 17, No. 7, pp. 633-646, 1993. 26. MEYER JP and GREYVENSTEIN GP; The influence of height above sea level on the COP of air-source heat

pumps used for water heating, Heat Transfer Engineering, Vol. 14, No. 2, pp. 44-50, 1993. 27. MEYER JP and GREYVENSTEIN GP; The calculation of viscous transonic flows with a pressure-based

method, AIAA Journal, Vol. 32, No. 3, pp. 659-661, 1994. 28. MEYER JP and TSHIMANKINDA M; Domestic hot water consumption by developing communities in South

African Traditional Houses, Energy - The International Journal, Vol. 21, No. 12, pp. 1101-1106, 1996. 29. MEYER JP and TSHIMANKINDA M; Domestic hot water consumption in South African houses for developed

and developing communities, International Journal of Energy Research, Vol. 21, pp. 667-673, 1997. 30. PETIT PJ and MEYER JP; A techno-economic analysis between the performances of air- and ground-source

air conditioners in South Africa, International Journal of Energy Research, Vol. 21, No. 11, pp. 1011-1021, 1997.

38

31. MEYER JP and TSHIMANKINDA M; Domestic hot water consumption by South African developing communities living in shacks, International Journal of Energy Research, Vol. 21, pp. 1081-1086, 1997.

32. VAN DEN VYVER S and MEYER JP; Heat transfer augmentation in the annulus of a heat exchanger

consisting of a round tube inside a twisted square tube, Research and Development Journal, Vol. 13, No. 3, pp. 77-82, 1997.

33. SWANEPOEL W and MEYER JP; Preliminary investigation of heat transfer augmentation by means of spiral

wires in the annulus of tube-in-tube heat exchangers, Research and Development Journal, Vol. 13, No. 3, pp. 98-100, 1997.

34. BEKKER MC, MEYER JP, PRETORIUS L and VAN DER MERWE DF; Separation of solid-liquid suspensions

with acoustic energy, Water Research Journal, Vol. 31, No. 10, pp. 2543-2549, 1997. 35. MEYER JP and TSHIMANKINDA M; Domestic hot-water consumption in South African apartments, Energy -

The International Journal, Vol. 23, No. 1, pp. 61-66, 1998. 36. MEYER JP and TSHIMANKINDA M; Domestic hot water consumption in South African Townhouses, Energy

Conversion and Management, Vol. 39, No. 7, pp. 679-684, 1998. 37. PETIT PJ and MEYER JP; Techno-economic analysis between the performances of heat source air-

conditioners in South Africa, Energy, Conversion and Management, Vol. 39, No. 7, pp. 661-669, 1998. 38. VORSTER PPJ and MEYER JP; Wet compression versus dry compression in heat pumps working with pure

refrigerants, Australian Refrigeration Air Conditioning & Heating Journal, (AIRAH Journal), Vol. 52, No. 3, pp. 40-43, 1998.

39. PETIT PJ and MEYER JP; Economic potential of vertical ground-source heat pumps compared to air-source

air-conditioners in South Africa, Energy - The International Journal, Vol. 23, No. 2, pp. 137-143, 1998. 40. WOOD CW and MEYER JP; Unsteady temperature distributions in vertical storage tanks heated with heat

pumps, Heat Transfer Engineering, Vol. 19, No. 3, pp. 43-52, 1998. 41. HERMAN H and MEYER JP; Heat transfer augmentation of a spiralled tube inside the annulus of a tube-in-

tube heat exchanger, Research and Development Journal, Vol. 14, No. 3, pp. 43-48, 1998. 42. MEYER JP; Evaluation of LPG as a refrigerant in air conditioning and refrigeration, Mechanical Technology,

pp. 7-12, December 1998. 43. MEYER JP; Evaluation of LPG, propane, R-404A, R-410A and R-407c as refrigerants in air conditioning and

refrigeration, Refrigeration and Air Conditioning, Vol. 15, No. 2, pp. 24-33, 1999. 44. MEYER JP, RAUBENHEIMER PJA and KRÜGER E; The influence of return loop flow rate on stratification in a

vertical hot water storage tank connected to a heat pump water heater, Heat Transfer Engineering, Vol. 21, No. 2, pp. 67 – 73, 2000.

45. VORSTER PPJ and MEYER JP; Wet compression versus dry compression in heat pumps working with pure

refrigerants or non-azeotropic binary mixtures for different heating applications, International Journal of Refrigeration, Vol. 23, No. 4, pp. 292-311, 2000.

46. MEYER JP, BUKASA JM and KEBONTE S; Average boiling and condensation heat transfer coefficients of the

zeotropic refrigerant mixture R22/R142b in a coaxial tube-in-tube heat exchanger, Journal of Heat Transfer, Vol. 122, No. 1, pp. 186-188, 2000.

47. COETZEE S, DA VEIGA WR and MEYER JP; Condensation in an annulus with spiralled wires, Research and

Development Journal, Vol. 16, No. 3, pp. 51 – 54, 2000.

39

48. MEYER JP; A review of domestic hot-water consumption in South Africa, Research and Development Journal,

Vol. 16, No. 3, pp. 55 – 61, 2000. 49. DE SWARDT CA and MEYER JP; A performance comparison between an air-source and a ground-source

reversible heat pump, International Journal of Energy Research, Vol. 25, No. 10, pp. 899 – 910, 2001 50. MEYER JP and WOOD CW; The design and experimental verification of heat exchanger accumulators used in

small commercially available air conditioning systems, International Journal of Energy Research, Vol. 25, No. 10, pp. 911 – 925, 2001.

51. MEYER JP; The performance of the refrigerants R-134a, R-290, R404A, R-407c and R-410A in air

conditioners and refrigerators, Strojniški Vestnik - Journal of Mechanical Engineering, Vol. 47, No. 8, pp. 366 – 373, 2001.

52. DE SWARDT CA and MEYER JP; A performance comparison between an air-source and a ground-source

reversible heat pump, Strojniški Vestnik - Journal of Mechanical Engineering, Vol. 47, No. 8, pp. 519 - 526, 2001.

53. SMIT FJ and MEYER JP; Condensation heat transfer coefficients of the zeotropic refrigerant mixture R-22/R-

142b, International Journal of Thermal Sciences, Vol. 41, No, 7, pp. 625 – 630, 2002. 54. SMIT FJ and MEYER JP; R-22 and Zeotropic R-22/R-142b mixture condensation in micro fin, high-fin and

twisted tape insert tubes, Journal of Heat Transfer, Vol. 124, No. 5, pp. 912 – 921, 2002. 55. DA VEIGA WR and MEYER JP; Heat transfer coefficient of a snow bag, International Journal of Refrigeration,

Vol. 25, No. 8, pp. 1043 – 1046, 2002. 56. SMIT FJ, THOME JR and MEYER JP; Heat transfer coefficients during condensation of the zeotropic

refrigerant mixture HCFC-22/HCFC-142b, Journal of Heat Transfer, Vol. 124, No. 6, pp. 1137 – 1146, 2002. 57. DIRKER J and MEYER JP; Heat transfer coefficients in concentric annuli, Journal of Heat Transfer, Vol. 124,

No. 6, pp. 1200 – 1202, 2002. 58. SMITH C, COETZEE PP and MEYER JP: The effectiveness of a magnetic physical water treatment device on

scaling in domestic hot-water storage tanks, Water SA, Vol. 29, No. 3, pp. 231 – 236, 2003. 59. COETZEE H, LIEBENBERG L and MEYER JP; Angled spiralling tape inserts in a heat exchanger annulus, R

& D Journal, Vol. 19, No. 2, pp 3 – 10, 2003. 60. DIRKER J and MEYER JP; Convection in concentric annular regions for turbulent flow of liquid water, R & D

Journal, Vol. 19, No. 2, pp. 17 – 21, 2003. 61. COETZEE H, LIEBENBERG L and MEYER JP; Heat transfer and pressure drop characteristics of angled

spiralling tape inserts in a heat exchanger annulus, Heat Transfer Engineering, Vol. 24, No. 6, pp 29 – 39, 2003.

62. BUKASA JP, LIEBENBERG L and MEYER JP; Heat transfer performance during condensation inside spiralled

micro-fin tubes, Journal of Heat Transfer, Vol. 126, No. 3, pp 321 – 328, 2004. 63. DIRKER J, VAN DER VYVER H and MEYER JP; Convection heat transfer in concentric annuli, Experimental

Heat Transfer, Vol. 17, No 1, pp. 19 – 29, 2004. 64. OLIVIER JA, LIEBENBERG L, KEDZIERSKI MA, and MEYER JP; Pressure drop during refrigerant

condensation inside horizontal smooth, helical micro-fin, and herringbone micro-fin tubes, Journal of Heat Transfer, Vol. 126, No. 5, pp. 687 – 696, 2004.

40

65. DIRKER J A and MEYER JP; Convective heat transfer coefficients in concentric annuli, Heat Transfer

Engineering, Vol. 26, No. 2, pp. 38 – 44, 2005. 66. LIEBENBERG L, THOME JR and MEYER JP; Flow visualization and flow pattern identification with power

spectral density distributions of pressure traces during refrigerant condensation in smooth and micro-fin tubes, Journal of Heat Transfer, Vol. 127, No. 3, pp. 209 – 220, 2005.

67. LOUW W and MEYER JP; Heat transfer during annular contact in a helically coiled tube-in-tube heat

exchanger, Heat Transfer Engineering, Vol. 26, No. 6, pp. 16 - 21, 2005. 68. DIRKER J, LIU W, VAN WYK JD, MALAN AG and MEYER JP; Embedded solid state heat extraction in

integrated power electronic modules, IEEE Transactions on Power Electronics, Vol. 20, No. 3, pp. 694 – 703, 2005.

69. DIRKER J, MALAN AG and MEYER JP; Thermal characterization of rectangular cooling shapes in heat

generating mediums – a three dimensional investigation, Strojniski Vestnik – Journal of Mechanical Engineering, Vol. 51, No 7 – 8, pp. 391 – 398, 2005.

70. BUKASA JP, LIEBENBERG L and MEYER JP; Influence of spiral angle on heat transfer during condensation

inside spiralled micro-fin tubes, Heat Transfer Engineering, Vol. 26, No. 7, pp. 11 – 21, 2005. 71. MEYER JP and VAN DER VYVER H; Heat Transfer Characteristics of a Quadratic Koch Island Fractal Heat

Exchanger, Heat Transfer Engineering, Vol. 26 (9), pp. 22 - 29, 2005. 72. LAMBRECHTS A, LIEBENBERG L, BERGLES AE and MEYER JP; Heat transfer performance during

condensation inside horizontal smooth, micro-fin and herringbone tubes, Journal of Heat Transfer, Vol. 128, No. 7, pp. 691- 700, 2006.

73. ZIMPAROV VD, PENCHEV PJ and MEYER JP; Performance evaluation of tube-in-tube heat exchangers with

heat transfer enhancement in the annulus, Thermal Science, Vol. 10, No. 1, pp. 45 - 56, 2006. 74. LIEBENBERG L and MEYER JP; The characterization of flow regimes with power spectral density distributions

of pressure fluctuations during condensation in smooth and micro-fin tubes, Experimental Thermal and Fluid Science, Vol. 31, pp. 127 - 140, 2006.

75. DIRKER J, VAN WYK JD and MEYER JP; Cooling of power electronics by embedded solids, ASME Journal of

Electronic Packaging, Vol. 128, pp. 388 - 397, 2006. 76. PATTINSON J, MALAN AG and MEYER JP; An agglomerated FAS multigrid accelerated cut-cell non-

collocated Cartesian mesh method for incompressible and compressible flow, South African Journal of Science, Vol. 102, No. 11/12, pp. 537 - 542, 2006.

77. OWAGA D, LIEBENBERG L and MEYER JP; A flow regime map for refrigerant condensation in herringbone

micro-fin tubes, South African Journal of Science, Vol. 102, No. 11/12, pp. 519 - 526, 2006. 78. BURGER NDL, DE VAAL PL and MEYER JP; Failure criteria for polyethylene acetabular cups, SA Journal of

Science, Vol. 102, No. 11/12, pp. 572 - 575, 2006. 79. BURGER NDL, DE VAAL PL and MEYER JP; Failure analysis on retrieved ultra high molecular weight

polyethylene (UHMWPE) acetabular cups, Engineering Failure Analysis, Vol. 14, pp. 1329 - 1345, 2007. 80. OLIVIER JA, LIEBENBERG L, THOME JR and MEYER JP; Heat transfer, pressure drop, and flow pattern

recognition during condensation inside smooth, helical micro-fin, and herringbone tubes, International Journal for Refrigeration, Vol. 30, pp. 609 - 623, 2007.

41

81. DIRKER J, MALAN AG and MEYER JP; Thermal characterization of rectangular cooling shapes in solids, International Journal of Numerical Methods for Heat and Fluid Flow, Vol. 17, No. 4, pp. 361 - 383, 2007.

82. MORRIS RM, SNYMAN JA and MEYER JP; Jets in crossflow mixing analysis using computational fluid

dynamics and mathematical optimization, AIAA Journal of Propulsion and Power, Vol. 23, No. 3, pp. 618 -628, 2007.

83. OLADIRAN MT and MEYER JP; Energy and exergy analyses of energy consumption in the industrial sector in

South Africa, Applied Energy, Vol. 84, No. 10, pp. 1056 - 1067, 2007. 84. BELLO-OCHENDE T, LIEBENBERG L, and MEYER JP; Constructal cooling channels for micro-channel heat

sinks, International Journal of Heat and Mass Transfer, Vol. 50, No, 21-22, pp. 4141 - 4150, 2007. 85. CANIÈRE H, T’JOEN C, WILLOCKZ A, DE PAEPE M, CHRISTIANS M, VAN ROOYEN E, LIEBENBERG L

and MEYER JP; Horizontal two-phase flow characterization for small diameter tubes with a capacitance sensor, Measurement Science and Technology, Vol. 18, pp. 2898 - 2906, 2007.

86. LIEBENBERG L and MEYER JP; In-tube passive heat transfer enhancement in the process industry, Applied

Thermal Engineering, Vol. 27, pp. 2713 - 2727, 2007. 87. BELLO-OCHENDE T, LIEBENBERG L, MALAN AG, BEJAN A and MEYER JP; Constructal conjugate heat

transfer in three dimensional cooling channels, Journal of Enhanced Heat Transfer, Vol. 14, No. 4, pp. 279 -293, 2007.

88. PATTINSON J, MALAN AG and MEYER JP; A cut-cell non-conforming Cartesian mesh method for

compressible and incompressible flow, International Journal for Numerical Methods in Engineering, Vol. 72, No. 11, pp. 1332 - 1354, 2007.

89. MALAN AG, MEYER JP and LEWIS RL; Modelling non-linear heat conduction via a fast matrix-free implicit

unstructured-hybrid algorithm, Computer Methods in Applied Mechanics and Engineering, Vol. 196, Issue 45 - 48, pp. 4495 - 4504, 2007.

90. BELLO-OCHENDE T, LIEBENBERG L and MEYER JP; Constructal design: geometric optimisation of micro-

channel heat sinks, SA Journal of Science, Vol. 103, No 11/12, pp. 483 - 489, 2007. 91. DIRKER J and MEYER JP; Cooling layers in rectangular heat generating electronic regions for two boundary

conditions types – A Comparison with a Traditional Approach, SA Journal of Science, Vol. 103, No. 11/12, pp. 474 - 482, 2007.

92. LIEBENBERG L and MEYER JP; A review of flow pattern-based predictive correlations during refrigerant

condensation in horizontally smooth and enhanced tubes, Heat Transfer Engineering, Vol. 29, No. 1, pp. 3 - 19, 2008.

93. LIEBENBERG L and MEYER JP; Refrigerant condensation flow regimes in enhanced tubes and their effect on

heat transfer coefficients and pressure drop, Heat Transfer Engineering, Vol. 29, No. 6, pp. 506 - 520, 2008. 94. VISSER CJ, MALAN AG and MEYER JP; An artificial compressibility algorithm for modelling natural

convection in saturated packed pebble beds: a heterogeneous approach, International Journal for Numerical Methods in Engineering, Vol. 75, No. 10, pp. 1214 – 1237, 2008.

95. VISSER CJ, MALAN AG and MEYER JP; An artificial compressibility method for buoyancy-driven flow in

heterogeneous saturated packed beds: a homogeneous approach, International Journal of Numerical Methods for Heat and Fluid Flow, Vol. 18, No 7/8, pp. 900 – 918, 2008.

96. DIRKER J and MEYER JP; Heat removal from power electronics in two direction sets using embedded solid

stated cooling layers - a proposed non-numerical calculation method, Heat Transfer Engineering, Vol. 30, No.

42

6, pp. 452 – 465, 2009. 97. JI T, LIEBENBERG L and MEYER JP; Heat transfer enhancement during condensation in smooth tubes with

helical wire inserts, Heat Transfer Engineering, Vol. 30, No. 5, pp. 337 - 352, 2009. 98. DIRKER J and MEYER JP; Thermal characterization of embedded heat spreading layers in rectangular heat-

generating electronic modules, International Journal for Heat and Mass Transfer, Vol. 52, No. 5-6, pp. 1374 – 1384, 2009.

99. BELLO-OCHENDE T and MEYER JP; Constructal cooling channels: application to heat transfer in micro-

channel heat sinks, International Journal of Emerging Multidisciplinary Fluid Sciences, Vol. 1, No. 1, pp. 61 – 83, 2009.

100. BELLO-OCHENDE T, MEYER JP and BEJAN A; Constructal ducts with wrinkled entrances, International

Journal of Heat and Mass Transfer, Vol. 52, No. 15-16, pp.3628 – 3633, 2009. 101. SULIMAN R, LIEBENBERG L and MEYER JP; Improved flow pattern map for accurate prediction of the heat

transfer coefficients during condensation of R-134a in smooth horizontal tubes and within the low-mass flux range, International Journal of Heat and Mass Transfer, Vol. 52, No. 25-26, pp. 5701 – 5711, 2009.

102. IGHALO F.U., BELLO-OCHENDE T and MEYER JP; Mathematical optimization: application to the design of optimal micro-channel heat sinks, Engenharia Térmica (Thermal Engineering), Vol. 8, No. 1, pp. 58 – 64, 2009.

103. BELLO-OCHENDE T, MEYER JP and DIRKER J; Three-dimensional multi-scale plate assembly for maximum

heat transfer rate density, International Journal of Heat and Mass Transfer, Vol. 53, No. 4, pp. 586-593, 2010. 104. VAN ROOYEN E, CHRISTIANS-LUPI M, LIEBENBERG L and MEYER JP; Probabilistic flow-pattern-based

heat transfer correlation for condensing intermittent flow of refrigerants in smooth horizontal tubes, International Journal of Heat and Mass Transfer, Vol. 53, Issue 7-8, pp. 1446 – 1460, 2010.

105. BELLO-OCHENDE T, MEYER J.P. and BEJAN A; Constructal multi-scale pin-fins, International Journal of

Heat and Mass Transfer, Vol. 53, Issue 13-14, pp. 2773-2779, 2010.

106. MOTSAMAI OS, SNYMAN JA and MEYER JP; Optimisation of gas turbine combustor mixing for improved exit temperature profile, Heat Transfer Engineering, Vol. 31, No. 5, pp. 402 – 418, 2010.

107. OLIVIER JA and MEYER JP; Single-phase heat transfer and pressure drop of the cooling of water inside

smooth tubes for transitional flow with different inlet geometries (RP-1280), HVAC&R Journal, Vol. 16, No. 4, pp. 471 – 496, 2010.

108. BELLO-OCHENDE T, MEYER JP and IGHALO FU; Combined numerical optimization and constructal theory for the design of micro-channel heat sinks, Numerical Heat Transfer, Application Part A, Vol. 58, pp. 882 – 899, 2010.

109. MEYER JP and OLIVIER JA; Transitional flow inside enhanced tubes for fully developed and developing flow with different types of inlet disturbances: Part I – adiabatic pressure drop, International Journal for Heat and Mass Transfer, Vol. 54, Issue 7-8, pp. 1587 – 1598, 2011.

110. MEYER JP and OLIVIER JA; Transitional flow inside enhanced tubes for fully developed and developing flow with different types of inlet disturbances: Part II – heat transfer, International Journal for Heat and Mass Transfer, Vol. 54, Issue 7-8, pp. 1598 – 1607, 2011.

111. BELLO-OCHENDE T, MEYER JP and OGUNRONBI OI; Constructal multiscale cylinders rotating in cross-flow, International Journal of Heat and Mass Transfer, Vol. 54, Issue 11 – 12, pp. 2568 – 2577, 2011.

43

112. LIPS S and MEYER JP; Two-phase flow in inclined tubes with specific reference to condensation: a review, International Journal of Multiphase Flow, Vol. 37, No. 8, pp. 845 – 859, 2011.

113. LE ROUX WG, BELLO-OCHENDE T and MEYER JP; Operating conditions of an open and direct solar thermal Brayton cycle with optimised cavity receiver and recuperator, Energy, Vol. 36, pp. 6027-6036, 2011.

114. ALAM MM, REHMAN S, MEYER JP and AL-HADHRAMI LM; Review of 600 - 2500 kW sized wind turbines and optimization of hub height for maximum wind energy yield realization, Renewable and Sustainable Energy, Vol. 15, pp. 3839 – 3849, 2011.

115. MEYER JP; Constructal law in technology, thermofluid and energy systems, and in design education, Physics of Life Reviews, Vol. 8, No. 3, pp. 247 – 248, 2011.

116. PAGE LG, BELLO-OCHENDE T and MEYER JP; Maximum heat transfer density rate enhancement from cylinders rotating in natural convection, International Communications in Heat and Mass Transfer, Vol. 38, No. 10, pp. 1354 – 1359, 2011.

117. ALAM MD and MEYER JP; Two interacting cylinders in cross flow, Physical Review E, Vol. 84, paper number 056304, 16 pages, 2011.

118. LIPS S and MEYER JP; Effect of gravity forces on heat transfer and pressure drop during condensation of

R134a, Microgravity Science and Technology, Vol. 24, No. 3, pp. 157-164, 2011.

119. VAN HEERDEN ASJ, LIDBETTER RT, LIEBENBERG L, MATHEWS EH and MEYER JP; Development of a motion platform for an educational flight simulator, International Journal of Mechanical Engineering Education, Vol. 39, No. 4, pp. 306-322, 2011.

120. LE ROUX WG, BELLO-OCHENDE T and MEYER JP; Thermodynamic optimization of an integrated design of a

small-scale solar thermal Brayton cycle, International Journal of Energy Research, Vol. 36, No. 11, pp. 1088 – 1104, 2012.

121. REHMAN S, MAHBUB AM, MEYER JP and AL-HADHRAMI LM; Feasibility study of a wind–pv-diesel hybrid

power system for a village, Renewable Energy, Vol. 38, No. 1, pp. 258 – 268, 2012.

122. LIPS S and MEYER JP; Experimental study of convective condensation in an inclined smooth tube. Part I: Inclination effect on flow pattern and heat transfer coefficient, International Journal for Heat and Mass transfer, Vol. 55, Issue 1 – 3, pp. 395-404, 2012.

123. LIPS S and MEYER JP; Experimental study of convective condensation in an inclined smooth tube. Part II: Inclination effect on pressure drops and void fractions, International Journal for Heat and Mass transfer, Vol. 55, Issue 1 – 3, pp. 405-412, 2012.

124. OLAKOYEJO OT, BELLO-OCHENDE T and MEYER JP; Mathematical optimisation of laminar forced convection heat transfer through a vascularised solid with square channels, International Journal of Heat and Mass Transfer, Vol. 55, Issue 9-10, pp. 2402 – 2411, 2012.

125. OLAKOYEJO OT, BELLO-OCHENDE T and MEYER JP; Constructal conjugate cooling channels with internal

heat generation, International Journal of Heat and Mass Transfer, Vol. 55, No. 15-16, pp. 4385 – 4396, Issue 14, 2012.

126. LORENTE S, CETKIN E, BELLO-OCHENDE T, MEYER JP and BEJAN A; The constructal-law of why swimmers must spread their fingers and toes, Journal of Theoretical Biology, Vol. 38, pp. 141 – 146, 2012.

127. MEHRABI M, SHARIFPUR M and MEYER JP; Application of the FCM-based neuro-fuzzy inference system and genetic algorithm-polynomial neural network approaches to modelling the thermal conductivity of alumina-water nanofluids, International Communications in Heat and Mass Transfer, Vol. 39, No. 7, pp. 971 – 977, 2012.

44

128. OBAYOPO S, BELLO-OCHENDE T and MEYER JP; Modelling and optimization of reactant gas transport in a

PEM fuel cell with a transverse pin fin insert in channel flow, International Journal of Hydrogen Energy, Vol. 37, No. 13, pp. 10286 – 10298, 2012.

129. BALOYI J, BELLO-OCHENDE T and MEYER JP; Minimization of thermal resistance in an air cooled porous matrix made up of solid spheres with heat generation, International Communication Heat and Mass Transfer, Vol. 39, No. 9, pp. 966 – 970, 2012.

130. LIPS S and MEYER JP; Stratified flow model for convective condensation in an inclined tube, International Journal of Heat and Fluid Flow, Vol. 36, pp. 83 – 91, 2012.

131. MEYER, JP, OLAKOYEJO OT and BELLO-OCHENDE T; Constructal optimisation of conjugate cooling

channels with internal heat generation, International Communications in Heat and Mass Transfer, Vol. 39, No: 9, pp. 1093 – 1100, 2012.

132. LE ROUX WG, BELLO-OCHENDE T and MEYER JP; Optimum performance of the small-scale open and direct solar thermal Brayton cycle at various environmental conditions and constraints, Energy, Vol. 46, No. 1, pp. 42 – 50, 2012.

133. MEYERS BC, SNEDDEN GC, MEYER JP, ROOS TH and MAHMOOD GI; Three-component particle velocimetry in a generic can-type gas turbine combustor, Part A: Journal of Power and Energy, Vol. 227, No. 7, pp. 892 – 902, 2012.

134. REHMAN S, MAHBUB AM, MEYER JP and AL-HADRAMI LM; Wind speed characteristics and resource assessment using weibull parameters, International Journal of Green Energy, Vol. 9, pp. 1-15, 2012.

135. MEYER JP, OLAKOYEJO OT and MEYER JP; Constructal optimisation of conjugate triangular cooling channels with internal heat generation, International Communications in Heat and Mass Transfer, Vol. 39, No. 1, pp. 1093 - 1110, 2012.

136. PAGE LG, BELLO-OCHENDE T and MEYER JP; Constructal multi scale cylinders with rotation cooled by natural convection, International Journal for Heat and Mass Transfer, Vol. 57, No. 1, pp. 345 - 355, 2013.

137. BELLO-OCHENDE T, OLAKOYEJO OT, MEYER JP, BEJAN A and MEYER JP; Constructal flow orientation in

conjugate cooling channels with internal heat generation, International Journal of Heat and Mass Transfer, Vol. 57, No. 1, pp. 241 - 249, 2013.

138. MEYER JP, McKRELL TJ and GROTE K; The influence of carbon nanotubes on single-phase heat transfer and pressure drop characteristics in the transitional flow regime of smooth tubes, International Journal of Heat and Mass Transfer, Vol. 58, No. 1-2, pp. 597 – 609, 2013.

139. YEKOLADIO PJ, BELLO-OCHENDE T and MEYER JP; Design and optimization of a downhole coaxial heat exchanger for an enhanced geothermal system (EGS), Renewable Energy, Vol. 55, pp. 128 – 137, 2013.

140. OBAYOPO SA, BELLO-OCHENDE T, MEYER JP; Three-dimensional optimisation of a fuel gas channel of a proton exchange membrane fuel cell for maximum current density, International Journal of Energy Research, Vol. 37, pp. 228 – 241, 2013.

141. MEHRABI M, SHARIFPUR M and MEYER JP; Viscosity of nanofluids based on an artificial intelligence model, International Communications in Heat and Mass Transfer, Vol. 43, pp. 16 – 21, 2013.

142. VAN ZYL WR, DIRKER J and MEYER JP; Single-phase convective heat transfer and pressure drop coefficients in concentric annuli, Heat Transfer Engineering, Vol. 34, No. 13, pp. 1112-1123, 2013.

45

143. MWESIGYE A, BELLO-OCHENDE T and MEYER JP; Numerical investigation of entropy generation in a parabolic through receiver at different concentration ratios, International Journal of Energy, Vol. 53, pp. 114-127, 2013.

144. VADASZ JJ, MEYER JP and GOVENDER S; Vibration effects on weak turbulent natural convection in a porous layer heated from below, International Communications in Heat and Mass Transfer, Vol. 45, pp. 100 – 110, 2013.

145. ADEWUMI OO, BELLO-OCHENDE T and MEYER JP; Constructal design of combined microchannel and micro pin fins for electronic cooling, International Journal of Heat and Mass Transfer, Vol. 66, pp. 315 – 323, 2013.

146. ALAM M and MEYER JP; Global aerodynamic instability of twin cylinders in cross flow, Journals of Fluids and Structures, Vol. 41, pp. 135-145, 2013.

147. BURGER FH, DIRKER J and MEYER JP; Three-dimensional conductive heat transfer topology optimisation in a cubic domain for the volume-to-surface problem, International Journal of Heat and Mass Transfer, Vol. 67, pp. 214-224, 2013.

148. LE ROUX WG, BELLO-OCHENDE T and MEYER JP; A review on the thermodynamic optimisation and modelling of the solar thermal Brayton cycle, Renewable and Sustainable Energy Reviews, Vol. 28, pp. 677 - 690, 2013.

149. MEHRABI M, SHARIFPUR M and MEYER JP; Modelling and multi-objective optimisation of the convective heat transfer characteristics and pressure drop of low concentration TiO2-water nanofluids in the turbulent flow regime, International Journal of Heat and Mass Transfer, Vol. 67, pp. 646 – 653, 2013.

150. SMITH L, OXTOBY OF, MALAN A and MEYER JP; An interactive boundary layer modelling methodology for

aerodynamic flows, International Journal of Numerical Methods for Heat and Fluid Flow, Vol. 23, No. 8, pp. 1373-1392, 2013.

151. REHMAN S, AL-HADHRAMI LM, ALAM M and MEYER JP; Empirical correlation between hub height and local

wind shear exponent for different sizes of wind turbines, Sustainable Energy Technologies and Assessments, Vol. 4, pp. 45-51, 2013.

152. DIRKER J and MEYER JP; Topology optimization for an internal heat-conduction cooling scheme in a square

domain for high heat flux applications, Journal of Heat Transfer, Special issue: High Heat Flux Cooling of Electronics, Vol. 135, No. 11, pp. 111010-1 – 111010-10, 2013.

153. KEMPSON WJ, WEBBER-YOUNGMAN RCW and MEYER JP; Optimizing shaft pressure losses through computational fluid dynamics modelling, The Journal of the Southern African Institute of Mining and Metallurgy, Vol. 113, No. 12, pp. 931 – 939, 2013.

154. MEYER JP, DIRKER J and ADELAJA AO; Condensation heat transfer in smooth inclined tubes for R134a at

different saturation temperatures, International Journal of Heat and Mass Transfer, Vol. 70, pp. 515-525, 2014.

155. LE ROUX W, BELLO-OCHENDE T and MEYER JP; The efficiency of an open-cavity solar receiver for a small-scale solar thermal Brayton cycle, Energy Conversion and Management, Vol. 84, pp. 457-470, 2014.

156. STOCKS M, BELLO-OCHENDE T and MEYER JP; Maximum thermal conductance for a micro-channel utilizing

Newtonian and non-Newtonian fluid, Heat and Mass Transfer, Vol. 50, pp. 865-875, 2014.

157. MEYER JP and OLIVIER JA; Heat transfer and pressure drop characteristics of smooth horizontal tubes in the transitional flow regime, Heat Transfer Engineering, Vol. 35, No. 14-15, pp. 1246 – 1253, 2014.

46

158. VADASZ JJ, MEYER JP and GOVENDER S; Chaotic and periodic natural convection for moderate and high Prandtl numbers in a porous layer subject to vibrations. Transport in Porous Media, Vol. 103, pp. 279 – 294, 2014.

159. BALOYI J, BELLO-OCHENDE T and MEYER JP; Thermodynamic optimisation and computational analysis of irreversibilites in a small-scale wood-fired circulating fluidised bed adiabatic combustor, Energy – The International Journal, Vol. 70, pp. 653-663, 2014.

160. DIRKER J, MEYER JP and GARACH D; Inlet flow effects in micro-channels in the laminar and transitional

regimes on single-phase heat transfer coefficients and friction factors, International Journal of Heat and Mass Transfer, Vol. 77, 612–626, 2014.

161. OKAFOR IF, DIRKER J and MEYER JP; Influence of circumferential solar heat flux distribution on the heat transfer coefficients of a linear Fresnel collector absorber tube, Solar Energy, Vol. 107, pp. 381 – 397, 2014.

162. NWOSU PN, MEYER JP, SHARIFPUR M; Nanofluid viscosity: A simple model selection algorithm and parametric evaluation, Computers and Fluids, Vol. 101, pp. 241-249, 2014.

163. ADELAJA AO, DIRKER J and MEYER JP; Effect of thick walled pipes with convective boundaries on laminar heat transfer, Applied Energy, Vol. 130, pp. 838-845, 2014.

164. MWESIGYE A, BELLO-OCHENDE T and MEYER JP; Heat transfer and thermodynamic performance of a parabolic through receiver with centrally placed perforated plate inserts, Applied Energy, Vol. 136, pp. 989 – 1003, 2014.

165. ALAM MM, REHMAN S, AL-HADHRAMI LM and MEYER JP; Extraction of the inherent nature of wind using wavelets and FFT, Energy for Sustainable Development, Vol. 22, pp. 34 – 47, 2014.

166. MOWAT AGB, MALAN AG, VAN ZYL LH and MEYER JP; Hybrid finite-volume reduced-order model method for nonlinear aeroelastic modeling, Journal of Aircraft, Vol. 51, No. 6, pp. 1805-1812, 2104.

167. NWOSU PN, MEYER JP and SHARIFPUR M; A review and parametric investigation into nanofluid viscosity models, Journal of Nanotechnology in Engineering and Medicine, Vol. 5, Paper: 031008, 1 – 8, 2014.

168. MWESIGYE A, BELLO-OCHENDE T and MEYER JP; Minimum entropy generation due to heat transfer and fluid friction in a parabolic trough receiver with non-uniform heat flux at different rim angles and concentration ratios, Energy, Vol. 73, pp. 606 – 617, 2014.

169. NGO LC, BELLO-OCHENDE T and MEYER JP; Numerical modelling and optimisation of natural convection

heat loss suppression in a solar cavity receiver with plate fins, Renewable Energy, Vol. 74, pp. 95 – 104, 2015.

170. MWESIGYE A, BELLO-OCHENDE T and MEYER JP; Multi-objective and thermodynamic optimisation of a parabolic trough receiver with perforated plate inserts, Applied Thermal Engineering, Vol. 77, pp. 42 – 56, 2015.

171. MARTINS LS, SOMMER EM, VARGAS JVC, ORDONEZ JC and MEYER JP; Parametric analysis of a single alkaline membrane fuel cell, Heat Transfer Engineering, Vol. 36, pp. 963-973, 2015.

172. VAN LAAR JH, SLABBER JFM, MEYER JP, VAN DER WALT IJ, PUTS HG and CROUSE PL; Microwave -

plasma synthesis of nano-sized silicon carbide at atmospheric pressure, Ceramics International, Vol. 41, No. 3 (part B), pp. 4326 – 4333, 2015.

173. ADIO SA, SHARIFPUR M, MEYER JP; Investigation into effective viscosity, electrical conductivity and pH of γ-AL2O3-Glycerol Nanofluids in Einstein Concentration Regime, Heat Transfer Engineering, Vol. 36, Nr. 14-15, pp. 1241-1251, 2015.

47

174. NOLTE HC, BELLO-OCHENDE T and MEYER JP; Second law analysis and optimization of a parabolic trough receiver tube for direct steam generation, Heat and Mass Transfer, Vol. 51, No. 6, pp. 875 – 887, 2015.

175. MOGHIMI MA, CRAIG KJ and MEYER JP; A novel computational approach to combine the optical and thermal modelling of linear Fresnel collectors using the finite volume method, Solar Energy, Vol. 116, pp. 407 – 427, 2015.

176. JANSEN E, BELLO-OCHENDE T and MEYER JP; Integrated solar thermal Brayton cycles with either one or two regenerative heat exchangers for maximum power output, Energy, Vol. 86, pp. 737 – 748, 2015.

177. NGO LC, BELLO-OCHENDE T and MEYER JP; Three-dimensional analysis and numerical optimization of combined natural convection and radiation heat loss in solar cavity receiver with plate fins insert, Energy Conversion and Management, Vol. 101, pp. 757 – 766, 2015.

178. YEKOLADIO P, BELLO-OCHENDE T and MEYER JP; Thermodynamic analysis and performance optimization of organic Rankine cycles for the conversation of low-to-moderate grade heat, International Journal of Energy Research, Vol. 39, pp. 1256 – 1271, 2015.

179. MOGHIMI MA, CRAIG KJ and MEYER JP; Optimization of a trapezoidal cavity absorber for the Linear Fresnel Reflector, Solar Energy, Vol. 119, pp. 343 – 361, 2015.

180. MWESIGYE A, HUAN Z and MEYER JP; Thermodynamic optimisation of the performance of a parabolic trough receiver using synthetic oil-Al2O3 nanofluid, Applied Energy, Vol. 156, pp. 398 – 412, 2015.

181. MAHDAVI M, SHARIFPUR M and MEYER JP; CFD modelling of heat transfer and pressure drops for nanofluids through vertical tubes in laminar flow by Lagrangian and Eulerian approaches, International Journal for Heat and Mass Transfer, Vol. 50, No. 21-22, pp. 4141 – 4150, 2015.

182. AYBAR H, SHARIFPUR M, AZIZIAN MR, and MEYER JP; A review of thermal conductivity models of nanofluids, Heat Transfer Engineering, Vol. 55, No. 1-3, pp. 395-404, 2015.

183. BASEER MA, MEYER JP, ALAM MM, and REHMAN S; Wind speed and power characteristics for Jubail industrial city, Saudi Arabia, Renewable and Sustainable Energy Reviews, Vol. 52, pp. 1193 – 1204, 2015.

184. ADIO SA, SHARIFPUR M and MEYER JP; Factors affecting the pH and electrical conductivity of MgO-ethylene glycol nanofluids. Bulletin of Material Science, Vol. 35, No. 5, pp. 1345 – 1357, 2015.

185. SHARIFPUR M, ADIO SA and MEYER JP; Experimental investigation and model development for effective viscosity of Al2O3-glycerol nanofluids by using dimensional analysis and GMDH-NH methods, International Communication in Heat and Mass Transfer, Vol. 68, pp. 208 – 219, 2015.

186. MARAIS MD, CRAIG KJ and MEYER JP; Computational flow optimization of heliostat aspect ratio for wind direction and elevation angle, Energy Procedia, Vol. 69, pp. 148 – 157, 2015.

187. RUNGASAMY AE, CRAIG KJ, MEYER JP; 3-D CFD modelling of a slanted receiver in a compact linear Fresnel plant with etendue-matched mirror field, Energy Procedia, Vol. 69, pp. 188 – 197, 2015.

188. KEMPSON W, WEBBER-YOUNGMAN R, and MEYER JP; Optimising shaft pressure losses through computational fluid dynamic modelling, Applied Thermal Engineering, Vol. 90, pp. 1098 – 1108, 2015.

189. MEYER JP, ADIO SA, SHARIFPUR M and NWOSU PN; The viscosity of nanofluids: a review of the theoretical, empirical and numerical models, Heat Transfer Engineering, Vol. 37, No. 5, pp. 387-421, 2016.

190. BASEER MA, MEYER JP, REHMAN S, ALAM MM, AL-HADRAMI LM, and LASHIM A; Performance evaluation

of cup-anemometer and wind speed characteristics analysis, Renewable Energy, Vol. 86, pp. 733 – 744, 2016.

48

191. MWESIGYE A, BELLO-OCHENDE T and MEYER JP; Heat transfer and entropy generation in a parabolic trough receiver with wall-detached twisted tape inserts, International Journal of Thermal Sciences, Vol. 99, pp. 238 – 257, 2016.

192. OLIVIER SP, MEYER JP, DE PAEPE and DE KERPEL K; The influencer of inclination angle on void fraction

and heat transfer during condensation inside a smooth tube, International Journal of Multiphase Flow, Vol. 80 pp, 1 – 14, 2016.

193. VADASZ JJ, MEYER JP, GOVENDER S and ZISKIND G; Experimental study of vibration effects on heat transfer during solidification of paraffin in a spherical shell, Experimental Heat Transfer, Vol. 29, pp. 1 – 29, 2016.

194. ADIO SA, SHARIFPUR M and MEYER JP; Influence of ultrasonification energy on the dispersion consistency of Al2O3-glycerol nanofluid based on viscosity data, and model development for the required ultrasonification energy density, Journal of Experimental Nanoscience, http://dx.doi.org/10.1080/17458080.2015.1107194, 2015.

Accepted and in press 1. TSHIMANGA N, SHARIFPUR M, MEYER JP, Experimental investigation and model development for thermal

conductivity of glycerol-MgO nanofluids, Heat Transfer Engineering, manuscript 7414, tentatively scheduled for Vol. 37, No. 16, 2016.

2. NGO LC, BELLO-OCHENDE T and MEYER JP; Numerical Investigation of natural convection of cavity receiver

for low power application, International Journal of Green Energy, accepted on 19 March 2014. 3. ADELAJA A, DIRKER J and MEYER JP; Convective condensation heat transfer of R134a in tubes at different

inclination angles, International Journal of Green Energy, accepted on 30 April 2014. 4. VAN DER WESTHUIZEN JE, DIRKER J and MEYER; Implementation of liquid crystal thermography to

determine wall temperatures and heat transfer coefficients in a tube-in-tube heat exchanger, Experimental Heat Transfer, accepted on 13 April 2015.

5. NOAH OO, SLABBER J and MEYER JP; Natural convection heat transfer phenomena investigation in packed

beds: lead-way towards new nuclear fuel design, Journal of Nuclear Engineering and Radiation Science, manuscript NERS-15-1007, accepted for publication on 11 June 2015.

6. NOAH OO, SLABBER J and MEYER JP; Modelling a Porous Region for natural convection heat transfer and

experimental validation in slender cylindrical geometries, Journal of Nuclear Technology, Paper number NT15-56, accepted on 30 June 2015, scheduled for publication March 2016.

7. BASEER MA, MEYER JP, REHMAN S, ALAM MM, AL-HADHRAMI LM; Performance evaluation of cup-

anemometers and wind speed characteristics analysis, Renewable Energy, manuscript number: RENE-D-14-02290R1, accepted on 25 August 2015.

8. REHMAN S, BASEER MA, MEYER JP, ALAM AA, ALHEMS M, LASHIN A, ALAREFE N; Suitability of utilizing

small horizontal axis wind turbines for off grid loads in Eastern Region of Saudi Arabia, Energy Exploration and Exploitation, manuscript: EEE15186, accepted on 12 September 2015.

9. ADIO SA, MEHRABI M, SHARIFPUR M and MEYER JP; Experimental investigation and model development

of the effective viscosity of MgO-ethylene glycol nanofluids using dimensional analysis, FCM-ANFIS and GA-PNN techniques, International Communications in Heat and Mass Transfer, manuscript number: CJ15/6662, accepted on 17 November 2015.

Conference papers 1. MEYER JP and EILERS W; Stepper Motor Dynamics for Linear Motion Control, Symposium on Simulation,

49

Third SAROB/ONSA, CSIR, Pretoria, South Africa, pp. XXXI, 10 and 11 March 1986. 2. MATHEWS EH and MEYER JP; Computation of wind loads on a semicircular greenhouse, Proceedings of the

Seventh International Conference on Wind Engineering, Aachen, West Germany, pp. 81-89, 6 - 10 July 1987. 3. NAUDÉ AF, MEYER JP and MATHEWS EH; An optimized mortar fin configuration, First South African

Weapon Systems Symposium, SA Army College, Hartbees Club, Pretoria, South Africa, 31 August - 4 September 1987.

4. CROSBY CP, MEYER JP and MATHEWS EH; Numerical Prediction of Wind Induced Pressure Distributions

on Film Clad Greenhouses, Proceedings of the Thirteenth South African Symposium on Numerical Mathematics, Uhmlanga Rocks, Durban, South Africa, pp. 39-53, 13-15 July 1987.

5. MEYER, JP and MATHEWS EH; Soundless mortar with minimum friction drag, First South African Weapon

Systems Symposium, SA Army College, Hartbees Club, Pretoria, South Africa, 31 August - 4 September 1987. 6. CROSBY CP, VISSER JA, MATHEWS EH and MEYER JP; The use of numerical computations in the

prediction of wind loads on buildings, Symposium on CFD, CSIR, Pretoria, South Africa, October 1988. 7. VAN ZYL GP, MEYER JP and MATHEWS EH; An effective numerical solver for irrotational flow problems,

Symposium on CFD, Proceedings S482, CSIR, Pretoria, South Africa, pp. 2.2-2.3, October 1988. 8. MEYER JP, MATHEWS EH and VAN ZYL GP; Numerical prediction of profiles corresponding to prescribed

pressure distributions, Symposium on CFD, Proceedings S482, CSIR, Pretoria, South Africa, October 1988. 9. MEYER JP, LE GRANGE LA and GREYVENSTEIN GP; The Heat Flow from Rock Surfaces into a Stope

Working Area, National Symposium on Heat Transfer and Thermal Technology, University of Pretoria, Pretoria, South Africa, 15 January 1991.

10. MEYER JP and GREYVENSTEIN GP; The use of heat pumps in South Africa for the heating of water for

hospitals, laundries and large residential units, National Symposium on Heat Transfer and Thermal Technology, University of Pretoria, Pretoria, South Africa, 15 January 1991.

11. MEYER JP and LE GRANGE LA; Air-scoops for the improvement of ventilation in a coal mine heading,

Proceedings of the 1st International Conference on Deposit Exploitation in Natural Hazard Conditions, Krakow, Poland, pp. 111 - 129, March 1991.

12. MEYER JP and GREYVENSTEIN GP; Numerical analysis of the economic viability of heat pumps against

solar heating systems for the heating of swimming pools, Seventh International Conference on Numerical Methods in Thermal Problems, Stanford, USA, pp. 1389-1398, 8-12 July 1991.

13. MEYER JP, LE GRANGE LA and GREYVENSTEIN GP; Temperature distribution in a mine shaft in the case of

an underground fire, National Symposium on Heat Transfer and Thermal Technology, University of Pretoria, Pretoria, 15 January 1991.

14. MEYER JP and GREYVENSTEIN GP; Economic modelling of price changes on the viability of heat pumps for

the heating of domestic water, Proceedings of the International Symposium on Economic Modelling, London, England, pp. 483-488, 9-11 July 1991.

15. GREYVENSTEIN GP and MEYER JP; The heating of swimming pools in South Africa: A techno-economic

comparison between solar heating and heat pumps, National Symposium on Heat Transfer and Thermal Technology, University of Pretoria, Pretoria, South Africa, 15 January 1991.

16. VAN STADEN MP and MEYER JP; The numerical optimization of the nose radius of an NACA64-006 airfoil,

Proceedings of the Second National CFD Conference, Vereeniging, South Africa, pp. 181-190, 24-26 June 1991.

50

17. GREYVENSTEIN GP and MEYER JP; The economic modelling of the viability of different methods of grain

drying, Proceedings of the International Symposium on Economic Modelling, London, England, 9-11 July 1991. 18. MEYER JP, LE GRANGE LA and MEYER C; A CFD analysis of the flow around air-scoops in a coal mine

heading, Proceedings of the Second National CFD Conference, Vereeniging, South Africa, pp. 171-180, 24-26 June 1991.

19. GREYVENSTEIN GP and MEYER JP; The use of a segregated CFD procedure to analyse the flow and

temperature distribution in large complex pipe networks, ICHMT International Numerical Heat Transfer Conference, Guildford, England, pp. 110-124, 22-26 July 1991.

20. GREYVENSTEIN GP, LE GRANGE LA and MEYER JP; The flow field in the vent duct and main shaft junction

of a mine shaft, Proceedings of the Second National CFD Conference, Vereeniging, South Africa, pp. 146-156, 24-26 June 1991.

21. MEYER JP and GREYVENSTEIN GP; Energy saving by means of heat pumps for the heating of domestic

water, International Symposium on Energy and the Environment, Espoo, Finland, pp. 483-489, 25-28 August 1991.

22. MEYER CF and MEYER JP; The effect of last through road air velocities on the depth of air penetration into

board and pillar headings and an assessment of methods for improving air penetration, 24th International Conference of Safety in Mines Research Institute, Moscow, Russia, 23-28 September 1991.

23. GREYVENSTEIN GP, LE GRANGE LA and MEYER JP; The optimization of ventilation ducting in an up cast

mine shaft tee junction with computational fluid dynamics, Proceedings of the Fifth International Mine Ventilation Congress, Johannesburg, South Africa, pp. 359-362, 25 - 30 October 1992.

24. MEYER JP; The utilization of air scoops for the control of ventilation in a coal mine heading; measurements

and CFD predictions, Fifth Mine Ventilation Symposium, University of West Virginia, USA, 22 - 26 June 1992. 25. MEYER JP; Air knife Technology in Industry, AGRELEK CENTRE, Cedara College, Natal, South Africa, pp.

1-12, 29 March 1993. 26. VAN STADEN MP and MEYER JP; Large industrial application of CFD to model the air flow through a 620

MW power station boiler, Proceedings of the Third National CFD Conference, Stellenbosch, South Africa, pp. 275-285, 30 June - 2 July 1993.

27. MEYER JP and GREYVENSTEIN GP; A Pressure-based numerical method for the calculation of viscous

transonic flows, Proceedings of the Third National CFD Conference, Stellenbosch, South Africa, pp. 163-181, 30 June - 2 July 1993.

28. MEYER JP; Mine ventilation and CFD in South Africa, Sixth Mine Ventilation Symposium, Las Vegas, USA, 28

June - 2 July 1993. 29. MEYER JP; The savings potential of domestic heat pump hot-water reticulation systems for developing

communities, Sixth Intersociety Energy Conservation Symposium, Manila, Philippines, 3 - 5 November 1995. 30. VORSTER PPJ and MEYER JP; Wet compression versus dry compression in heat pumps working with pure

refrigerants, Proceedings of the International Air Conditioning and Refrigeration Conference, Hobart, Tasmania, Australia, pp. 1-7, 24 to 26 March 1997.

31. OERDER SA and MEYER JP; The effectiveness of a ground-coupled heating and cooling system,

Proceedings of CLIMA 97, Brussels, Belgium, Paper no. 372, (20 pages), 30 August - 2 September, 1997, 32. SMIT FJ and MEYER JP; Potential of non-azeotropic refrigerant mixture as working refrigerant in hot-water

51

heat pumps, Proceedings of CLIMA 97, Brussels, Belgium, Paper no. 369, (20 pages), 30 August - 2 September, 1997.

33. SMIT FJ and MEYER JP; An analytical comparison between the performance of a hot-water heat pump with a

non-azeotropic refrigerant mixture and a pure refrigerant, Proceedings of the American Society of Mechanical Engineers and ASIA ’97 Congress, Singapore, paper no: 97-AA-42, (8 pages), 30 September - 2 October 1997.

34. LIEBENBERG L and MEYER JP; The viability of capacity control of high temperature heat pump water heaters

operating with non-azeotropic refrigerant mixtures, Proceedings of the American Society of Mechanical Engineers and ASIA ’97 Congress, Singapore, paper no: 97-AA-28 (10 pages), 30 September - 2 October 1997.

35. OERDER SA and MEYER JP; A municipality water reticulation ground-coupled reversible heat pump system

as an alternative to an air source system, Proceedings of the American Society of Mechanical Engineers and ASIA ’97 Congress, Singapore, paper no: 97-AA-38, (12 pages), 30 September - 2 October 1997.

36. OERDER S and MEYER JP; Effectiveness of a municipal ground-coupled reversible heat pump system

compared to an air source system, ASHRAE Transactions, San Francisco, CA, USA, Vol. 104, Part 1A, Paper no. 4149, pp. 540-549, 17-21 January 1998.

37. SMIT FJ and MEYER JP; Investigation of the potential effect of zeotropic refrigerant mixture on performance of

a hot-water heat pump, ASHRAE Transactions, San Francisco, CA, USA, Vol. 104, Part 1A, Paper no. 4128, pp. 387-394, 17-21 January 1998.

38. LIEBENBERG L and MEYER JP; Potential of the zeotropic mixture R-22/R-142b in high temperature heat

pump water heaters with capacity modulation, ASHRAE Transactions, San Francisco, CA, USA, Vol. 104, Part 1A, Paper no. 4134, pp. 418-429, 17-21 January 1998.

39. DE SALDANHA D and MEYER JP; Comparative measurements between snow shooting and mechanical

refrigeration during the transportation of dairy products in insulated bodies, The Frigair '98 International Refrigeration and Air Conditioning Conference, Cape Town,, pp. C3.1-C3.12, 4th-6th March 1998.

40. MEYER JP; Analysis of heat load on insulated transport vehicles and bodies, The Frigair '98 International

Refrigeration and Air Conditioning Conference, Cape Town, pp. C5.1-C5.13, 4th-6th March 1998. 41. MEYER JP; Domestic hot-water consumption in different types of dwellings in Johannesburg for developed

and developing communities, Proceedings of the International Conference on Domestic Use of Electrical Energy, Cape Town, pp. 245-250, 6-8 April 1998.

42. MEYER JP (keynote); Evaluation of energy efficient and environmentally acceptable pure and zeotropic

refrigerants in air-conditioning and refrigeration, Proceedings of the USA-RSA Bi-National Energy and Environmental Workshop, University of Durban-Westville, Durban, pp. 133-144, 8-12 June 1998.

43. PETIT PJ and MEYER JP; A steady state model for the prediction of compressor characteristics for small air

conditioning units, Proceedings of the 59th Eurotherm conference, Nancy, France, pp. 393-399, 6 to 7 July 1998.

44. SWANEPOEL W and MEYER JP; Wet compression versus dry compression in refrigeration cycles working

with pure refrigerants or non azeotropic mixtures for spatial air conditioning applications, Proceedings of the 59th Eurotherm conference, Nancy, France, pp. 409-415, 6 to 7 July 1998.

45. WOOD CW and MEYER JP; A mathematical analysis of accumulator heat exchangers to achieve liquid

overfeeding effects in small air conditioning systems, Proceedings of the 59th Eurotherm conference, Nancy, France, pp. 417-423, 6 to 7 July 1998.

52

46. MEYER JP; Convective boiling of refrigerant 22 and 142b in horizontal tubes, Proceedings of the 11th International Heat Transfer Conference, Kyongju, Korea, pp. 285-290, 23-28 August 1998.

47. VAN STADEN MP, PRETORIUS L and MEYER JP; Simulation of heat exchange in large air cooled

condensers, Proceedings of the 11th International Heat Transfer Conference, Vol. 6, Kyongju, Korea, pp. 155-160, 23-28 August 1998.

48. PRETORIUS L, MEYER JP and VAN STADEN MP; Mixed convection heat transfer in an annular enclosure,

Proceedings of the 11th International Heat Transfer Conference, Kyongju, Korea, pp. 323-328, 23-28 August 1998.

49. MEYER JP (keynote); Evaluation of LPG as a refrigerant in air-conditioning and refrigeration, Proceedings of

the Liquefied Petroleum Gas Association of South Africa, Durban, pp. 1-9, 23-24 October 1998. 50. WOOD, CW and MEYER, JP; A mathematical analysis of accumulator heat exchangers to achieve liquid

overfeeding effects in small air conditioning systems, Proceedings of the ASME Advanced Energy Systems Division - 1998, AES-Vol. 38, (Edited by: H Metghalchi, E Kweller, M.L. Ramalingam & JN Chapman), 1998 ASME International Mechanical Engineering Congress & Exposition, Anaheim, USA, pp. 409-313, 15-20 November 1998.

51. MEYER JP (keynote); Evaluation of energy efficient and environmentally acceptable pure and zeotropic

refrigerants in air conditioning and refrigeration, Technical Meeting of the South African Institute of Refrigeration and Air Conditioning (SAIRAC), 14 pages, 18 February 1999.

52. MEYER JP; New energy efficient and environmentally safe refrigerants in domestic refrigerators and freezers,

Proceedings of the Sixth International Conference on the domestic use of electrical energy, Cape Technikon, Cape Town, pp. 124-127, 30 March – 1 April 1999.

53. WOOD CW and MEYER JP; Increasing the energy efficiency of domestic air conditioners, refrigerators and

freezers, Proceedings of the Sixth International Conference on the domestic use of electrical energy, Cape Technikon, Cape Town, pp. 141-145, 30 March – 1 April 1999.

54. MEYER JP; Domestic hot water consumption of the developed and developing communities in South Africa,

ASHRAE Transactions, Seattle, Vol. 105, Part 2, Paper no. 4289, pp. 173 – 178, 1999. 55. COETZEE S, DA VEIGA WR and MEYER JP; Condensation of R22 during heat transfer augmentation with

spiralled wires in the annulus of a tube-in-tube heat exchanger for hot-water heat pumps, Proceedings of the International Conference on Compact Heat Exchangers and Enhancement Technology for the Process Industries, Banff, Canada, pp. 377-384, 18 – 23 June 1999.

56. PETIT PJ and MEYER JP; A steady-state model for the high-pressure side of unitary air-conditioners,

Proceedings of the ASME Advanced Energy Systems Division, (Editors: Aceves, S.M., Garimella, S. and Peterson, R.), 1999 ASME International Mechanical Engineering Congress and Exposition, Nashville, Tennesse, AES-Vol. 39, pp. 85-94, 14 – 19 November 1999.

57. WOOD CW and MEYER JP; Experimental verification of a universal accumulator heat exchanger design,

Proceedings of the ASME Advanced Energy Systems Division, (Editors: Aceves, S.M., Garimella, S. and Peterson, R.), 1999 ASME International Mechanical Engineering Congress and Exposition, Nashville, Tennesse, AES-Vol. 39, pp. 99-103, 14 – 19 November 1999.

58. BUKASA JM, KEBONTE SA and MEYER JP; Average boiling heat transfer and pressure drop coefficients of

the zeotropic refrigerant mixture R22/R142b in a helically coiled water heated tube-in-tube heat exchanger, Proceedings of the International Conference on Applied Mechanics, SACAM 2000, Edited by: Adali, S, Morozov, E.V. and Verijenko, V.E., pp. 379-383, 11-13 January 2000.

59. COETZEE S, DA VEIGA WR and MEYER JP; Enhancement of R22 condensation employing spiralled wires in

53

the annulus of a tube-in-tube heat exchanger for use in hot-water heat pumps, Proceedings of the International Conference on Applied Mechanics, SACAM 2000, Edited by: Adali, S, Morozov, E.V. and Verijenko, V.E., pp. 384 - 388, 11-13 January 2000.

60. DE SWARDT CA and MEYER JP; A performance comparison between an air-source and a ground-source

reversible heat pump, Proceedings of the ASME-ZSITS International Thermal Science Seminar, Bled, Slovenia, June 11 – 14, 2000.

61. LIEBENBERG L and MEYER JP; Energy-saving potential of capacity-modulated heat pump water heaters

using zeotropic mixtures, Proceedings of the International Conference on Applied Mechanics, SACAM 2000, Edited by: Adali, S, Morozov, E.V. and Verijenko, V.E., pp. 423 - 428, 11-13 January 2000.

62. KRUGER E, GOOVAERTS R and MEYER JP; The influence of return loop flow rate and position on

stratification in a vertical hot-water storage tank connected to a heat pump, Proceedings of the International Conference on Applied Mechanics, SACAM 2000, Edited by: Adali, S, Morozov, E.V. and Verijenko, V.E., pp. 436 - 441, 11-13 January 2000.

63. SMITH C, COETZEE PP and MEYER JP; Treatment devices for preventing scale fouling in hot water storage

tanks, Proceedings of the International Conference on Applied Mechanics, SACAM 2000, Edited by: Adali, S, Morozov, E.V. and Verijenko, V.E., pp. 635 – 640, 11-13 January 2000.

64. VAN DER VYVER S and MEYER JP; The design, optimization and experimental verification of an accumulator

heat exchangers, Proceedings of the International Conference on Applied Mechanics, SACAM 2000, Edited by: Adali, S, Morozov, E.V. and Verijenko, V.E., pp. 641 - 646, 11-13 January 2000.

65. PETIT PJ and MEYER JP; A steady-state model for the high pressure side of unitary air-conditioners,

Proceedings of the International Conference on Applied Mechanics, SACAM 2000, Edited by: Adali, S, Morozov, E.V. and Verijenko, V.E., pp. 442 - 447, 11-13 January 2000.

66. VORSTER PPJ and MEYER JP; A comparison of pure refrigerants with non-azeotropic binary mixtures

working in heat pumps under wet compression and dry compression conditions, Proceedings of the International Conference on Applied Mechanics, SACAM 2000, Edited by: Adali, S, Morozov, E.V. and Verijenko, V.E., pp. 448 - 453, 11-13 January 2000.

67. WOOD CW and MEYER JP; The modelling and experimental verification of liquid overfeeding accumulator

heat exchangers in small air conditioners, Proceedings of the International Conference on Applied Mechanics, SACAM 2000, Edited by: Adali, S, Morozov, E.V. and Verijenko, V.E., pp. 81 - 86, 11-13 January 2000.

68. PETIT PJ, and MEYER JP; A steady state model for the high-pressure side of unitary air-conditioners,

Proceedings of the Symposium on Energy Engineering in the 21st Century (SEE 2000), Kowloon, Hong Kong, (Editor: Ping Cheng), Begel House, New York, Vol. 3, pp. 1076-1083, 9-13 January 2000.

69. SWANEPOEL W and MEYER JP; Evaluating wet compression in refrigeration cycles working with pure or non-

azeotropic refrigerant mixtures for air-conditioners, Proceedings of the Symposium on Energy Engineering in the 21st Century (SEE 2000), Kowloon, Hong Kong, (Editor: Ping Cheng), Begel House, New York, Vol. 3, pp. 1105-1113, 9-13 January 2000.

70. DA VEIGA WR and MEYER JP; Temperature control in refrigerated transport with a snow bag, Proceedings of

the Symposium on Energy Engineering in the 21st Century (SEE 2000), Kowloon, Hong Kong, (Editor: Ping Cheng), Begel House, New York, Vol. 3, pp. 1114-1121, 9-13 January 2000.

71. DE SWARDT C and MEYER JP; The performance of a municipality water reticulation ground-source reversible

heat pump system compared to an air-source system, Frigair, South Africa’s 10th International Air Conditioning, Refrigeration & Ventilation Congress, Gallagher Estate, Midrand, paper no: 16, 7 pages, 8 – 10 March 2000.

72. KRÜGER E, GOOVAERTS R and MEYER JP; Stratification in a vertical hot water storage tank connected to a

54

heat pump, Frigair, South Africa’s 10th International Air Conditioning, Refrigeration & Ventilation Congress, Gallagher Estate, Midrand, paper no: 18, 6 pages, 8 – 10 March 2000.

73. COETZEE S, DA VEIGA W and MEYER JP; Enhancement of R22 condensation employing spiralled wires in

the annulus of a tube-in-tube heat exchanger, for use in hot-water heat pumps, Frigair, South Africa’s 10th International Air Conditioning, Refrigeration & Ventilation Congress, Gallagher Estate, Midrand, paper no: 19, 7 pages, 8 – 10 March 2000.

74. MEYER JP (keynote); The performance of the refrigerants R-134a, R-290, R-404A, R-407c and R-410A in air-

conditioners and refrigerators, Proceedings of the ASME-ZSITS International Thermal Science Seminar, Bled, Slovenia, pp. 67 – 74, 11 – 14 June 2000.

75. MEYER JP, SMITH C and COETZEE PP; Scale prevention in a hot-water storage tank with a magnetic

physical water treatment device, Proceedings of the ASME-ZSITS International Thermal Science Seminar, Bled, Slovenia, pp. 295 – 300, 11 – 14 June 2000.

76. DA VEIGA R and MEYER JP; The effect of a permanent magnet on scale formation in a tube, Proceedings of

the ASME-ZSITS International Thermal Science Seminar, Bled, Slovenia, pp. 301 – 307, 11 – 14 June 2000. 77. MEYER JP; Experimental evaluation of five refrigerants as replacements for R-22, ASHRAE Transactions,

Vol. 106, Pt.2, Paper nr: MN-00-6-4, pp. 583 – 588, 2000. 78. DE SWARDT C and MEYER JP; A performance comparison between an air-source and a ground-source

reversible heat pump, Proceedings of the International Conference on Applied Mechanics, SACAM 2000, Durban, South Africa, Edited by Adali S, Morozov EV and Verijenko VE, pp. 397 – 402, 2000.

79. MEYER JP; Experimental evaluation of five refrigerants as replacements for R-22, Mechanical Technology, pp.

29 – 32, July 2000. 80. DIRKER J, VAN DER HOEK L and MEYER JP; Heat transfer augmentation with spiralled wires during

condensation in the annulus of a coiled tube-in-tube heat pumps, Proceedings of the 3rd European Thermal Sciences Conference, Heidelberg, Germany, Vol. 2, pp. 1187 – 1192, 10 – 13 September 2000.

81. LIEBENBERG L, BERGLES AE and MEYER JP; A review of refrigerant condensation in horizontal micro-fin

tubes, The 2001 International Mechanical Engineering Congress and Exposition, Orlando, Florida, 5 – 10 November 2001, AES-Vol. 40, pp. 155 – 168, 2000.

82. SMIT FJ and MEYER JP; Condensation heat transfer coefficients of the zeotropic refrigerant mixture R-22/R-

142b in smooth horizontal tubes, Proceedings of the Fifth World Conference on Experimental Heat Transfer, Fluid Mechanics, and Thermodynamics, Thessaloniki, Greece, Vol 1, pp. 405 – 410, 24 – 28 September, 2001.

83. COETZEE H, LIEBENBERG L and MEYER JP; Heat transfer and pressure drop characteristics of angled

spiralling tape inserts in a heat exchanger annulus, 2001 ASME International Mechanical Engineering Congress & Exposition, New York, 11 – 16 November 2001.

84. VAN DER HOEK L, LIEBENBERG L and MEYER JP; Validation of in-tube condensation performance,

Proceedings of the First International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Skukuza, South Africa, Vol. 1, Part 1, pp. 236 – 241, 8 – 10 April 2002.

85. COETZEE H, LIEBENBERG L, OERDER SA, VAN DER VYVER H and MEYER JP; Heat transfer and

pressure drop characteristics of angled spiralling tape inserts in a heat exchanger annulus, Proceedings of the First International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2002), Skukuza, South Africa, Vol. 1, Part 1, pp. 476 – 481, 8 – 10 April 2002.

86. DA VEIGA R and MEYER JP; Development of a volumetric flow rate set-up used for the evaluation of a

permanent magnet and the effect it has on scale formation in tubes, Proceedings of the First International

55

Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2002), Skukuza, South Africa, Vol. 1, Part 2, pp. 732 – 737, 8 – 10 April 2002.

87. DENYS N and MEYER JP; The economic viability of a microturbine cogeneration system, Proceedings of the

First International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2002), Skukuza, South Africa, Vol. 1, Part 2, pp. 793 – 798, 8 – 10 April 2002.

88. DA VEIGA WR and MEYER JP; Temperature control in refrigerated transport with a snow bag, Proceedings of

the First International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2002), Skukuza, South Africa, Vol. 1, Part 2, pp. 799 – 801, 8 – 10 April 2002.

89. DIRKER J and MEYER JP; Heat transfer coefficients in concentric annuli, Proceedings of the First

International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2002), Skukuza, South Africa, Vol. 1, Part 2, pp. 1093 – 1098, 8 – 10 April 2002.

90. LIEBENBERG L, BUKASA JP, HOLM K, MEYER JP and BERGLES AE; Unified approach to modelling of in-

tube condensation in smooth and micro-fin tubes, Compact Heat Exchanger Symposium, A Fetschrift on the 60th Birthday of Ramesh K Shah, Grenoble, France, 24 August 2002.

91. DIRKER J and MEYER JP; Heat transfer in concentric annuli, Proceedings of the Twelfth International Heat

Transfer Conference, Grenoble, France, Vol. 2, pp. 147 – 152, 2002, 18 – 23 August 2002. 92. DENYS N and MEYER JP; Heating water for large residential units in South Africa with microturbine

cogeneration systems, Proceedings of the ICAMM2003 Applied Mechanics and Materials Conference, Durban, pp. 98 – 107, 21 – 23 January 2003.

93. DIRKER J and MEYER JP; Convective heat transfer in concentric annuli, Proceedings of the ICAMM2003

Applied Mechanics and Materials Conference, Durban, pp. 108 – 114, 21 – 23 January 2003. 94. COBLENTZ LC and MEYER JP; Uncertainty in heat exchangers, Proceedings of the ICAMM2003 Applied

Mechanics and Materials Conference, Durban, pp. 181 – 189, 21 – 23 January 2003. 95. DA VEIGA WR and MEYER JP; Heat transfer from a snow bag used in refrigerated transport, Proceedings of

the ICAMM2003 Applied Mechanics and Materials Conference, Durban, pp. 92 – 97, 21 – 23 January 2003. 96. ZIMPAROV VD, PENCHEV PJ and MEYER JP; Performance evaluation of tube-in-tube heat exchangers with

heat transfer enhancement in the annulus, Proceedings of the 2nd International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, (HEFAT2003), Livingstone, Zambia, paper nr ZV1, 23 – 25 June 2003.

97. BUKASA JPM, LIEBENBERG L and MEYER JP; Influence of spiral angle on heat transfer during condensation

inside spiralled micro-fin tubes, Proceedings of the 2nd International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, (HEFAT2003), Livingstone, Zambia, paper nr BJ1, 23 – 25 June 2003.

98. MALULEKE AM and MEYER JP; Thermal energy storage optimisation for air conditioning plants, Proceedings

of the 2nd International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, (HEFAT2003), Livingstone, Zambia, paper nr MA1, 23 – 25 June 2003.

99. LIEBENBERG L and MEYER JP; Use of pressure fluctuations for flow pattern identification during

condensation in smooth- and micro-fin tubes, Proceedings of the 2nd International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, (HEFAT2003), Livingstone, Zambia, paper nr LL2, 23 – 25 June 2003.

100. LAMBRECHTS A, LIEBENBERG L and MEYER JP; Heat transfer coefficients in a horizontal herringbone tube

during in-tube condensation, Proceedings of the 2nd International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, (HEFAT2003), Livingstone, Zambia, paper nr LA2, 23 – 25 June 2003.

56

101. LOUW WI and MEYER JP; Annular tube contact in a helically coiled tube-in-tube heat exchanger, Proceedings of the 2nd International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, (HEFAT2003), Livingstone, Zambia, paper nr LW2, 23 – 25 June 2003.

102. DA VEIGA WR and MEYER JP; Semicircular heat exchanger used in a water heated condenser pump,

Proceedings of the 2nd International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, (HEFAT2003), Livingstone, Zambia, paper nr DW1, 23 – 25 June 2003.

103. DA VEIGA R and MEYER JP; Development of a weighing technique experimental set-up for the evaluation of

physical water treatment devices for the prevention of calcium carbonate scale, , Proceedings of the 2nd International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, (HEFAT2003), Livingstone, Zambia, paper nr DR1, 23 – 25 June 2003.

104. DIRKER J and MEYER JP; Optimum rectangular embedded cooling structure shapes in heat generation

mediums: a two-dimensional approach, , Proceedings of the 2nd International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, (HEFAT2003), Livingstone, Zambia, paper nr DJ1, 23 – 25 June 2003.

105. DA VEIGA WR and MEYER JP; Semicircular Heat Exchangers, Proceedings of the Fourth International

Conference on Compact Heat Exchangers and Enhancement Technology for the Process Industries, (Editors: Shah RK, Deakin AW, Honda H and Rudy TM), Crete, Greece, pp. 235 – 239, 28 September to 3 October 2003.

106. MEYER JP and LIEBENBERG L (keynote); Flow patterns during condensation in smooth and micro-fin tubes,

Proceedings of the Fourth International Conference on Compact Heat Exchangers and Enhancement Technology for the Process Industries, (Editors: Shah RK, Deakin AW, Honda H and Rudy TM), Crete, Greece, pp. 267 – 280, 28 September to 3 October 2003.

107. VAN DER VYVER H, DIRKER J and MEYER JP; Validation of a CFD model of a three-dimensional tube-in-

tube heat exchanger. Proceedings of the 3rd International Conference on CFD in the minerals and process industries, CSIRO, Witt PJ and Schwarz MP (Eds.), SCIRO, pp. 235 - 240, Melbourne, Australia, 10 - 12 December 2003.

108. MALAN AG, MEYER JP and LEWIS RW; A matrix-free implicit solution algorithm for incompressible flows on

hybrid unstructured grids, Proceedings of the Fourth South African Conference on Applied Mechanics, (ed. K. J. Craig), Johannesburg, paper nr. 44, 19 to 21 January 2004.

109. DIRKER J, LIU W, VAN WYK JD and MEYER JP; Evaluation of embedded heat extraction for high power

density integrated electromagnetic power passives, Proceedings of the IEEE 35th Annual Power Electronics Specialists Conference, PESC04, Aachen, Germany, pp. 4888 - 4893, 20-25 June 2004.

110. DIRKER J, MALAN AG and MEYER JP; Numerical modelling and characterization of the thermal behaviour of

embedded rectangular cooling inserts in modern heat generating mediums, Proceedings of the 3rd International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, (HEFAT2004), Cape Town, paper nr DJ1, 21 – 24 June 2004.

111. MALAN AG and MEYER JP; A fast Krylov-space algorithm for the modelling of non-linear heat conduction on

hybrid unstructured meshes, Proceedings of the 3rd International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, (HEFAT2004), Cape Town, paper nr MA3, 21 – 24 June 2004.

112. LIEBENBERG L AND MEYER JP (keynote); Condensation flow regime characterization using power spectral

density distributions of pressure fluctuations, Proceedings of the 3rd International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, (HEFAT2004), Cape Town, paper nr K1, 21 – 24 June 2004.

113. MALAN AG and MEYER JP; Modelling non-linear heat conduction via an efficient matrix-free hybrid

unstructured algorithm, Proceedings of the European Congress on Computational Methods in Applied Sciences and Engineering, Jyvaskyla, Finland, 24-28 July 2004.

57

114. OLIVIER, JA, LIEBENBERG L. and MEYER JP; Experimental Pressure Drops during Condensation Inside

Smooth, Helical Micro-fin, and Herringbone Tubes using R-22, R-134a, and R-407C, Proceedings of 6th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics (ExHFT6), Matsushima, Japan, paper nr. 7-b-4, 17 – 21 April 2005.

115. MALAN AG and MEYER JP; A fast matrix-free implicit unstructured-hybrid algorithm for modelling non-linear

heat conduction, Proceedings of the Third MIT Conference on Computational Fluid and Solid Mechanics, Cambridge, USA, Paper nr MIT-3A/233, 14 – 17 June, 2005.

116. JI T, LIEBENBERG L and MEYER JP; A flow regime map during condensation in smooth tubes with helical

inserts, Proceedings of the 5th International Symposium on Multiphase Flow, Heat, Mass Transfer and Energy Conversion, Xi’an, China, paper nr: 067, 3 – 6 July 2005.

117. LIEBENBERG L, OLIVIER J, THOME JR and MEYER JP; Flow Pattern-based Pressure Drop Correlations for

Refrigerant Condensation in Smooth and Enhanced Tubes, Proceedings of the IIR Conference: Thermophysical Properties and Transfer Processes of Refrigerants, Vicenza, Italy, 8 pages , 31 Aug – 2 Sept, 2005.

118. DIRKER J and MEYER JP; Thermal characterisation of parallel-running embedded cooling layers with

negligible thermal interfacial resistance for single directional heat extraction, Proceedings of the 4thd International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, (HEFAT2005), Cairo, Egypt, paper nr DJ2, 19 – 22 September 2005.

119. MALAN AG, PATTINSON J and MEYER JP; Modelling incompressible flow on cut-cell Cartesian meshes,

Proceedings of the 4th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, (HEFAT2005), Cairo, Egypt, paper nr MA7, 19 – 22 September 2005.

120. MALAN AG and MEYER JP; Modelling non-linear heat conduction via a fast matrix-free implicit unstructured-

hybrid algorithm, Proceedings of the 4th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, (HEFAT2005), Cairo, Egypt, paper nr MA6, 19 – 22 September 2005.

121. JI T, HOLM K, LIEBENBERG L and MEYER JP; Visualization of water flowing through glass tubes with helical

wire inserts, Proceedings of the 4th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, (HEFAT2005), Cairo, Egypt, paper nr HK16, 19 – 22 September 2005.

122. VAN DER MERWE C, MALAN AG and MEYER JP; The effective transient pore-scale modelling of the solid

conduction facet of an ordered packed-bed of spheres: A one-dimensional study’, Proceedings of the 5th South African Conference on Applied Mechanics, Cape Town, 16 – 18 January 2006.

123. MALAN AG and MEYER JP; Modelling non-linear heat conduction via a fast edge-based matrix-free implicit

unstructured-hybrid algorithm, Proceedings of the 5th South African Conference on Applied Mechanics, Cape Town, 16 – 18 January 2006.

124. PATTINSON J, MALAN AG and MEYER JP; An edge-based methodology for modeling compressible flow and

incompressible flow and on cut-cell non-collocated Cartesian Meshes, Proceedings of the 5th South African Conference on Applied Mechanics, Cape Town, 16 – 18 January 2006.

125. DE PAEPE M, CANIÉRE H, T’JOEN C, STEEMAN H-J, WILLOCKX A, CHRISTIANS M, VAN ROOYEN E,

LIEBENBERG L and MEYER JP; Refrigerant flow regime detection with a capacitance void fraction sensor, Collection of Technical Papers – Proceedings of the 9th AIAA/ASME Joint Thermophysics and Heat Transfer Conference Proceedings, San Francisco, paper number AIAA 2006-3130, Vol. 2, pp. 818 - 832, 5 - 8 Jun 2006.

126. MALAN AG and MEYER JP; A Matrix-free preconditioned Newton-Krylov solution algorithm for modelling the

non-linear diffusion equation, Proceedings of the 7th World Congress on Computational Mechanics, Los

58

Angeles, 16 - 22 July 2006. 127. LIEBENBERG L and MEYER JP (keynote); The search for objective heat transfer and pressure drop models

for flow condensation in horizontal tubes, Proceedings of the 13th International Heat Transfer Conference (IHTC-13), Sydney, Paper nr: KN-21, 13 - 18 August 2006.

128. BELLO-OCHENDE T, LIEBENBERG L, AG MALAN, BEJAN A and MEYER JP; Optimal geometry for

conjugate heat transfer in a cooling channel, Proceedings of the 13th International Heat Transfer Conference (IHTC-13), Sydney, Paper nr: HTE-02, 13 - 18 August 2006.

129. DIRKER J and MEYER JP; Thermal characterization of embedded cooling layers with negligible thermal

interfacal resistance for orthogonal bi-directional external heat extraction, Proceedings of the 13th International Heat Transfer Conference (IHTC-13), Sydney, Paper nr: CND-03, 13 - 18 August 2006.

130. MALAN AG and MEYER JP; A fast matrix-free unstructured-hybrid algorithm for modelling non-linear heat

conduction, Proceedings of the 13th International Heat Transfer Conference (IHTC-13), Sydney, Paper nr: MTH-13, 13 - 18 August 2006.

131. JI T, LIEBENBERG L and MEYER JP; Pressure drop during condensation in smooth tubes with a helical wire

insert, Proceedings of the 13th International Heat Transfer Conference (IHTC-13) , Sydney, Paper nr: MPH-48, 13 - 18 August 2006.

132. MORRIS RM, SNYMAN JA and MEYER JP; Mathematical optimization of jets in crossflow, Proceedings of the

13th International Heat Transfer Conference (IHTC-13), Sydney, Paper nr: COM-21, 13 - 18 August 2006. 133. LIEBENBERG L and MEYER JP (keynote); In-tube passive heat transfer enhancement in the process

industry, Proceedings of the 9th Conference on Process Integration, Modelling and Optimization for Energy Saving and Pollution Reduction (PRES2006), Prague, Paper nr: G7.1, 27 - 31 August 2006.

134. LIEBENBERG L and MEYER JP (keynote); Refrigerant condensation flow regimes in enhanced tubes and

their effect on heat transfer coefficients and pressure drops, Proceedings of the 17th International Conference of Chemical and Process Engineering (CHISA2006), Prague, Paper nr: F5.1, 27 - 31 August 2006.

135. MALAN AG, VISSER CJ and MEYER JP; Modelling heat and fluid flow through packed beds - a density based

vertex-centred methodology, Proceedings of the 3rd International Topical Meeting on High Temperature Reactor Technology - HTR 2006, Sandton, 1 - 4 October 2006.

136. BURGER NDL and MEYER JP; Continues improvement and quality assurance in the capstone project at the

University of Pretoria, Proceedings of the National Capstone Design Course Conference, University of Colorado, Boulder, 13 - 15 June 2007.

137. Bello-Ochende T, Dirker J and Meyer JP; Three-dimensional geometric optimization of heat-generating plates

cooled by forced convection, Proceedings of the Fifth International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2007), Sun City, South Africa, paper number BT2, 1 to 4 July 2007.

138. Christians-Lupi M, van Rooyen E, Liebenberg L and Meyer JP; Flow pattern-based heat transfer correlation for

condensing R-22 in a smooth tube, Proceedings of the Fifth International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2007), Sun City, South Africa, paper number CM4, 1 to 4 July 2007.

139. Van Rooyen E, Christians M, Liebenberg L and Meyer JP; Optical measurement technique for predicting time-

fractions in two-phase flow, Proceedings of the Fifth International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2007), Sun City, South Africa, paper number VE1, 1 to 4 July 2007.

140. BELLO-OCHENDE T and MEYER JP; Combined micro-channel heat sink optimization for cooled electronics,

Proceedings of the ASME-JSME Thermal Engineering Summer Heat Transfer Conference, Vancouver, Canada, paper number HT2007-32049, 8 - 17 July 2007.

59

141. BELLO-OCHENDE T, MEYER JP and BEJAN A; Maximum heat transfer rate density from ducts with wrinkled

entrances, Proceedings of the Sixth International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2008), Pretoria, South Africa, paper number OO2, 30 June to 2 July 2008.

142. VADASZ J, MEYER JP, and GOVENDER S,; Experimental evidence of density and mechanical properties

enhancements of binary alloys, Proceedings of the Sixth International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2008), Pretoria, South Africa, paper number VJ1, 30 June to 2 July 2008.

143. MEYER JP, MOTSAMAI OS and SNYMAN JA; Optimal mixing of multiple reacting jets in a gas turbine

combustor, Proceedings of the Sixth International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2008), Pretoria, South Africa, paper number MO1, 30 June to 2 July 2008.

144. VADASZ J, MEYER JP, GOVENDER S, ANDRICK M, CARTER W, EBRAHIM H, NAIDOO A, NGUBANE I

and OGLE M; Experimental evidence of density and mechanical properties enhancements of binary alloys by solidification subject to vibrations, Proceedings of IMECE2008, ASME International Mechanical Engineering Congress and Exposition, Boston, paper number IMECE2008-68148, 2 – 6 November 2008.

145. SULIMAN R, LIEBENBERG L and MEYER JP; Updated low mass flux transition criterion during refrigerant

condensation in smooth horizontal tubes, Proceedings of the Sixth International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2008), Pretoria, South Africa, paper number SR1, 30 June to 2 July 2008.

146. MEYER JP, LIEBENBERG L AND OLIVIER JA; Pressure drop inside a smooth tube with different inlet

geometries in the transitional flow regime for water cooled at a constant wall temperature, Proceedings of the 7th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics (ExHFT7), Krakow, Poland, pp. 1265-1272, 28 June to 3 July 2009.

147. BELLO-OCHENDE T, MEYER JP and BEJAN A; Constructal heat transfer in the entrance region of parallel

plate channels and ducts, Proceedings of the 7th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics (ExHFT7), Krakow, Poland, pp. 1399-1407, 28 June to 3 July 2009.

148. VADASZ J, MEYER JP, GOVENDER S, ANDRICK M, CARTER W, EBRAHIM H, NAIDOO A, NGUBANE I

and OGLE M; Experimental evidence of density and mechanical properties enhancements of binary alloys by solidification subject to vibrations, Proceedings of the ASME Summer Heat Transfer Conference, San Francisco, paper number HT2009-88587, 19 – 23 July 2009.

149. MEYERS BC, SNEDDEN GC, MEYER JP, ROOS TH, and MAHMOOD GI; Three-dimensional particle image

velocimetry in a generic can-type gas turbine combustor, Proceedings of the 19th Conference on the International Society for Air Breathing Engines, Quebec, Canada, paper number 1108, 7 to 11 September 2009.

150. OGUNRONBI OI, BELLO-OCHENDE T and MEYER JP; Maximum heat transfer rate density from a rotating

multiscale array of cylinders, Proceedings of COBEM2009, 20th International Congress of Mechanical Engineering, Gramado, Brazil, 15 to 20 November 2009.

151. IGHALO FU, BELLO-OCHENDE T and MEYER, JP; Mathematical optimization: application to the design of

optimal micro-channel heat sinks, The Third South Conference on Computational Modelling, 3MCSUL, FURG, Rio Grande, Brazil, 23-25 November 2009.

152. MEYER JP, LIEBENBERG L and OLIVIER JA; Heat transfer characteristics of smooth circular tubes with

different inlet geometries in the transitional flow regime, Proceedings of the 14th IAHR Cooling Tower and Air-Cooled Heat Exchanger Conference, Stellenbosch, paper number OP05, 1 – 3 December 2009.

153. NEL HJ, LOMBAARD IF, LIEBENBERG L and MEYER JP; Fouling of an air-cooled heat exchanger, an

60

alternative design approach, Proceedings of the 14th IAHR Cooling Tower and Air-Cooled Heat Exchanger Conference, Stellenbosch, paper number OP05, 1 – 3 December 2009.

154. IGHALO FU, BELLO-OCHENDE T and MEYER JP; Designed micro-channel heat sinks using mathematical

optimization with variable axial length, Proceedings of the 7th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, HEFAT2010, Antalya, Turkey, pp. 1345 - 1350, 19 – 21 July 2010.

155. ALAM MM and MEYER JP; Two-cylinder wake with and without tripwires, Proceedings of the 7th International

Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, HEFAT2010, Antalya, Turkey, pp. 239 - 244, 19 – 21 July 2010.

156. OLAKOYEJO OT, BELLO-OCHENDE T and MEYER JP; Optimisation of circular cooling channels with internal

heat generation, Proceedings of the 7th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, HEFAT2010, Antalya, Turkey, pp. 1395 - 1400, 19 – 21 July 2010.

157. SHANDU R, BELLO-OCHENDE T and MEYER JP; Heat transfer and fluid flow in tree-shaped structures with

smaller length scales, Proceedings of the 7th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, HEFAT2010, Antalya, Turkey, pp. 1365 - 1371, 19 – 21 July 2010.

158. OBAYOPA SO, BELLO-OCHENDE T and MEYER JP; Numerical optimisation of a single PEM fuel cell under

variable operating conditions, Proceedings of the 7th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, HEFAT2010, Antalya, Turkey, pp. 667 - 672, 19 – 21 July 2010.

159. SULIMAN R, KYEMBE M and MEYER JP; Experimental investigation and validation of heat transfer

coefficients during condensation of R134a at low mass fluxes, Proceedings of the 7th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, HEFAT2010, Antalya, Turkey, pp. 2243 - 2249, 19 – 21 July 2010.

160. DIRKER J and MEYER JP; Topology optimization for an internal heat conducting cooling scheme in a square

domain, Proceedings of the 7th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, HEFAT2010, Antalya, Turkey, pp. 1785 - 1790, 19 – 21 July 2010.

161. OBAYOPO SO, BELLO-OCHENDE T and MEYER JP; Thermodynamic optimization of PEM fuel cell stack gas

channel for optimal thermal performance, Proceedings of the 14th International Heat Transfer Conference, IHTC-14, Washington DC, Paper: IHTC14-22233, 8 – 13 August 2010.

162. BELLO-OCHENDE, MEYER JP and BEJAN A; Maximum heat transfer from multi-scale fins arranged in a row

with non-uniform geometry, Proceedings of the 14th International Heat Transfer Conference, IHTC-14, Washington DC, Paper: IHTC14-22808, 8 – 13 August 2010.

163. VADASZ J, MEYER JP and GOVENDER S; Heat transfer enhancements using vibration solidification of

paraffin, Proceedings of the 14th International Heat Transfer Conference, IHTC-14, Washington DC, Paper: IHTC14-23146, 8 – 13 August 2010.

164. MEYER JP, CHRISTIAANS M, LIEBENBERG L and VAN ROOYEN E; Probabilistic flow-pattern-based heat

transfer for condensing intermittent flow in smooth horizontal tubes, Proceedings of the 14th International Heat Transfer Conference, IHTC-14, Washington DC, Paper: IHTC14-22336, 8 – 13 August 2010.

165. MEYER JP, LIEBENBERG L, and OLIVIER JA; Single-phase heat transfer and pressure drop of water cooled

inside horizontal smooth tubes in the transitional flow regime, Proceedings of the 14th International Heat Transfer Conference, IHTC-14, Washington DC, Paper: IHTC14-22338, 8 – 13 August 2010.

166. OLAKOYEJO O, BELLO-OCHENDE T and MEYER JP; Geometric optimisation of forced convection in cooling

channels with internal heat generation, Proceedings of the 14th International Heat Transfer Conference, IHTC-14, Washington DC, Paper: IHTC14-22230, 8 – 13 August 2010.

61

167. MEYER JP and DU PREEZ A; Heat transfer and pressure drop characteristics of water in the transitional flow regime of horizontal smooth tubes at constant wall temperature, Proceedings of the 14th International Heat Transfer Conference, IHTC-14, Washington DC, Paper: IHTC14-22340, 8 – 13 August 2010.

168. MEYER JP and OLIVIER JA (keynote); Heat transfer and pressure drop characteristics of circular smooth

tubes in the transitional flow regime, Proceedings of the 19th International Congress of Chemical and Process Engineering CHISA 2010 and the 7th European Congress of Chemical Engineering ECCE7, Prague, Paper: I6.1, 28 August – 1 September 2010.

169. NTULI MP, DIRKER J and MEYER JP; Heat transfer and pressure drop coefficients for turbulent flow in

concentric annular ducts, Proceedings of the 19th International Congress of Chemical and Process Engineering (CHISA 2010) and the 7th European Congress of Chemical Engineering 7 (ECCE7), Prague, Paper: I6.4, 28 August – 1 September 2010.

170. LE ROUX WG, BELLO-OCHENDE T and MEYER JP; Minimization and optimum distribution of entropy generation for maximum net power output of the small-scale open and direct solar thermal Brayton cycle, First Postgraduate Renewable Energy Symposium, Lynedoch, Cape Town, 11 – 12 November 2010.

171. OBAYOPO, BELLO-OCHENDE and MEYER JP; Thermodynamic optimization of proton exchange membrane fuel cell system, First Postgraduate Renewable Energy Symposium, Lynedoch, Cape Town, 11 – 12 November 2010.

172. SMITH L, OXTOBY O, MALAN AG and MEYER JP; Efficient modelling of aerodynamic flows in the boundary layer for high performance computing, Second South African Conference on Computational Mechanics – An International Conference, AfriComp11, Cape Town, 5 – 8 January 2011.

173. DIRKER J and MEYER JP; Thermal optimization for internal embedded conductive cooling schemes using topology optimization techniques, Proceedings of the ASME/JSME 2011 8th Thermal Engineering Joint Conference, AJTEC2011, Honolulu, Hawaii, Paper AJTEC2011-44291, 13 – 17 March 2011.

174. IGHALO FU, BELLO-OCHENDE T, and MEYER JP; Geometric optimization of multiple-arrays of micropin-fins, Proceedings of the ASME/JSME 2011 8th Thermal Engineering Joint Conference, AJTEC2011, Honolulu, Hawaii, Paper AJTEC2011-44285, 13 – 17 March 2011.

175. MEYER JP and OLIVIER JA (keynote); Heat transfer and pressure drop characteristics of smooth tubes in the transitional flow regime, Proceedings of the International Conference on Thermal Energy and Environment, INCOTEE-2011, Kalasalingam University, TamilNadu, India, 24 – 26 March 2011.

176. ALAM MM and MEYER JP; Global feature of flow around twin cylinders, Proceedings of the 2011 International Conference on Computer and Communication Devices (ICCCD2011), Bali Island, Indonesia, Paper: V2-395, 1 – 3 April 2011.

177. MOWAT AGB, MALAN AG, VAN ZYL LH and MEYER JP; A hybrid finite-volume-rom approach to non-linear aerospace fluid-structure interaction modelling, International Forum of Aeroelasticity and Structural Dynamics (IFASD 2011), Paris, 26 – 30 June 2011.

178. LIPS S and MEYER JP; Effect of gravity forces on heat transfer and pressure drops during condensation of

R134a, 92th Eurotherm Seminar on Gravitional Effects on Liquid-Vapour Phase Change, Presqu’île de Giens, Hyėres, France, 17 – 21 April 2011.

179. ALAM MM, REHMAN S, MEYER JP and AL-HADRAMI LM; Wind speed and power characteristics at different heights for a wind data collection tower in Saudi Arabia, Proceedings of the World Renewable Congress, Linköping, Sweden, 8 – 13 May 2011.

180. LE ROUX WG, BELLO-OCHENDE T and MEYER JP; Optimum performance of the small-scale open and direct solar thermal Brayton cycle at various environmental conditions and constraints, Proceedings of the 6th

62

International Green Energy Conference (IGEC-6), Eskişehir, Turkey, Paper number IGEC-VI-2011-044, 5-9 June, 2011.

181. LIPS S and MEYER JP; Experimental study of convective condensation of R134a in a inclined tube, Proceedings of the 8th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2011), Pointe Aux Piments, Mauritius, pp. 38 – 43, 11 – 13 July 2011.

182. LE ROUX WG, BELLO-OCHENDE T and MEYER JP; Optimum operating conditions of the small-scale open and direct solar thermal Brayton cycle at various steady-state conditions, Proceedings of the 8th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2011), Pointe Aux Piments, Mauritius, pp. 110 - 119, 11 – 13 July 2011.

183. REHMAN S, ALAM Md. M, MEYER JP and AL-HADHRAMI LM; Analysis of a multi-megawatt grid connected wind farm, Proceedings of the 8th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2011), Pointe Aux Piments, Mauritius, pp. 125 – 129, 11 – 13 July 2011.

184. OBAYOPO SO, BELLO-OCHENDE T and MEYER JP; Numerical study of effect and physical parameters on a PEM fuel cell performance, Proceedings of the 8th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2011), Pointe Aux Piments, Mauritius, pp. 567 – 574, 11 – 13 July 2011.

185. ALAM Md. M and MEYER JP (keynote); Fluid dynamics around twin cylinders and interactions, Proceedings of the 8th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Pointe Aux Piments (HEFAT2011), Mauritius, pp. 635 – 649, 11 – 13 July 2011.

186. OLAKOYEJO OT, BELLO-OCHENDE T and MEYER JP; Geometric optimisation of forced convection in a vascularised material, Proceedings of the 8th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2011), Pointe Aux Piments, Mauritius, pp. 38 – 43, 11 – 13 July 2011.

187. MEYER JP and HALLQUIST M; Heat transfer coefficients for laminar to turbulent flow in tubes at constant heat flux, Proceedings of the 8th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2011), Pointe Aux Piments, Mauritius, pp. 675 – 680, 11 – 13 July 2011.

188. LE ROUX WG, BELLO-OCHENDE T and MEYER JP; Maximum net power output of the recuperative open

and direct solar thermal Brayton cycle, Proceedings of the ASME 2011 5th International Conference on Energy Sustainability (ES2011), Washington, paper number ES2011-54189, 7 – 10 August 2011.

189. LIPS S and MEYER JP; A model for stratified flow during convective condensation in an inclined tube, The Twelfth UK National Conference, University of Leeds, Paper no: 29, 30 August – 1 September 2011.

190. SMITH L, MEYER JP, OXTOBY OF and MALAN AG; An interactive boundary layer modelling methodology for aerodynamic flows, Proceedings of the ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE2011, Denver, paper number IMECE2011-62075, 11 – 17 November 2011.

191. MEYER JP, NWOSU PN and SHARIFPUR M; A critical review and algorithm-based approach for selection of nanofluid viscosity models, Proceedings of the ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE2011, Denver, paper number IMECE2011-66136, 11 – 17 November 2011.

192. VADASZ J, MEYER JP, GOVENDER S and ZISKIND G; Vibration effects on heat transfer during solidification of paraffin, Proceedings of the ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE2011, Denver, paper number IMECE2011-63345, 11 – 17 November 2011.

193. NAGAR RK, MEYER JP, ALAM M and SPEDDING G; Flow field around dimpled pin-fins in a staggered array, Proceedings of the ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE2011, Denver, paper number IMECE2011-63485, 11 – 17 November 2011.

63

194. NAGAR RK, MEYER JP, ALAM M and SPEDDING G; Fluid dynamics around a dimpled pin-fin, Proceedings of the ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE2011, Denver, paper number IMECE2011-63485, 11 – 17 November 2011.

195. LE ROUX WG, BELLO-OCHENDE and MEYER JP; Optimisation of the receiver and recuperator of the small-

scale open and direct thermal Brayton cycle for Pretoria, Second Postgraduate Renewable Energy Symposium, Lynedoch, 17 en 18 November 2011.

196. OBAYOPO SO, BELLO-OCHENDE T and MEYER JP; Performance enhancement of a PEM fuel cell through reactant channel and gas diffusion layer optimization, Second Postgraduate Renewable Energy Symposium, Lynedoch, 17 en 18 November 2011.

197. OLAKOYEJO OT, BELLO-OCHENDE T and MEYER JP; Constructal optimisation of rectangular conjugate cooling channels for minimum thermal resistance, Proceedings of the Constructal Law Conference, Porto Alegre, Brazil, 1 – 2 December 2011.

198. ALAM MM and MEYER JP; Global aerodynamic instability of two cylinders subjected to cross-flow. The Proceedings of the IUTAM Symposium on Bluff Body Flows, pp. 71-74, IIT, Kanpur, India, 12-16 December 2011.

199. ALAM MM and MEYER JP; Reynolds number effect on flow-induced forces on two tandem cylinders. The Proceedings of the Fourth International Conference on Mechanical Engineering (ICME2011), paper no ICME2011-FL-025, Dhaka, Bangladesh, 18-20 December 2011.

200. SHARIFPUR M and MEYER JP (invited paper); The effect of uncertainty of conductivity and viscosity of nanofluids on heat transfer, 1st International Conference on Nanostructures and Nanomaterials: Science and Applications, Masjedsoleyman, Iran, 7 -9 February 2012.

201. MEHRABI M, SHARIFPUR M and MEYER JP; Adaptive neuro-fuzzy modelling of the thermal conductivity of alumina-water nanofluids, Proceedings of the ASME 2012 3rd Micro/Nanoscale Heat and Mass Transfer International Conference, MNHMT2012, Atlanta, Georgia, Paper number MNHMT2012-75023, 3 – 6 March 2012.

202. REHMAN S, ALAM M, MEYER JP and AL-HADHRAMI; Long-term wind speed trends over Saudi Arabia, Proceedings of the World Congress on Water, Climate, and Energy, paper number 708, Dublin, 13 - 18 May 2012.

203. LE ROUX WG, BELLO-OCHENDE T and MEYER JP; Optimum small-scale open and direct solar thermal Brayton cycle for Pretoria, South Africa, Proceedings of the 1st Southern African Solar Energy Conference, SASEC 2012, Stellenbosch, paper number ST7, 21 – 23 May 2012.

204. PAGE L, BELLO-OCHENDE T and MEYER JP; Geometric optimization for maximum heat transfer density rate from cylinders rotating in natural convection, Proceedings of the International Symposium on Advances in Computational Heat Transfer, CHT12, Bath, paper number CHT12-NC15, 1 – 6 July 2012.

205. VAN ZYL WR, DIRKER J and MEYER JP; Single-phase convective heat transfer and pressure drop coefficients in smooth concentric annuli, Proceedings of the Ninth International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2012), Malta, pp. 753 - 762, 16 – 18 July 2012.

206. OLAKOYEJO OT, BELLO-OCHENDE T and MEYER JP; Flow orientation in conjugate channels with internal heat generation, Proceedings of the Ninth International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2012), Malta, pp. 1564 - 1573, 16 – 18 July 2012.

207. OBAYOPO SO, BELLO-OCHENDE T and MEYER JP; Impact of cooling channel geometry on thermal management and performance of a proton exchange membrane fuel cell, Proceedings of the Ninth International

64

Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2012), Malta, pp. 1458 - 1466, 16 – 18 July 2012.

208. BELLO-OCHENDE T and MEYER JP (keynote); Designed optimum geometry for micro-channel and micro pin fins heat sinks cooling technology, Proceedings of the Ninth International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2012), Malta, pp. 1304 - 1318, 16 – 18 July 2012.

209. BALOYI J, BELLO-OCHENDE T and MEYER JP; Optimum geometry of solid porous spheres with heat generation, Proceedings of the Ninth International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2012), Malta, pp. 1290 - 1297, 16 – 18 July 2012.

210. VADASZ J, MEYER JP, GOVENDER S, and ZISKIND G; Vibration effects on heat transfer during solidification of paraffin, Proceedings of the Ninth International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2012), Malta, pp. 1139 - 1147, 16 – 18 July 2012.

211. OLAKOYEJO OT, BELLO-OCHENDE T and MEYER JP; Optimisation of conjugate triangular cooling channels with internal heat generation, Proceedings of the Ninth International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2012), Malta, pp. 1104 - 1111, 16 – 18 July 2012.

212. GARACH DV, DIRKER J and MEYER JP; Heat transfer and pressure drop in microchannels with different inlet conditions for water in the laminar and transitional flow regimes, Proceedings of the Ninth International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2012), Malta, pp. 763 - 770, 16 – 18 July 2012.

213. MWESIGYE A, BELLO-OCHENDE T and MEYER JP; Numerical analysis of thermal performance of an externally longitudinally finned receiver for parabolic trough solar collector, Proceedings of the Ninth International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2012), Malta, pp. 159 - 168, 16 – 18 July 2012.

214. LE ROUX WG, BELLO-OCHENDE T and MEYER JP; Optimum small-scale open and direct solar thermal Brayton cycle for Pretoria, South Africa, Proceedings of the ASME 2012 6th International Conference on Energy Sustainability (ES2012), San Diego, paper no: ES2012-91135, 23 – 26 July 2012.

215. OBAYOPO SO, BELLO-OCHENDE T and MEYER JP; Numerical study and optimisation of channel geometry and gas diffusion layer of a PEM fuel cell, Proceedings of the ASME 2012 6th International Conference on Energy Sustainability & 10th Fuel Cell Science, Engineering and Technology Conference ESFuelCell2012, San Diego, Paper no: ESFuelCell2012-91269, 23 – 26 July 2012.

216. OBAYOPO SO, BELLO-OCHENDE T and MEYER JP; Optimising the performance of a PEM fuel cell with transverse fin inserts in the channel flow using mathematical algorithm, Proceedings of the ASME 2012 6th International Conference on Energy Sustainability and 10th Fuel Cell Science, Engineering and Technology Conference ESFuelCell2012, San Diego, Paper no: FuelCell2012-91267, 23 – 26 July 2012.

217. MEHRABI M, REZAZADEH S, SHARIFPUR M and MEYER JP; Modelling of proton exchange membrane fuel cell (PEMFC) performance by using genetic algorithm-polynomial neural network (GA-PNN) hybrid system, Proceedings of the ASME 2012 10th Fuel Cell Science, Engineering and Technology Conference, FuelCell2012, Paper no: FuelCell2012-91392, San Diego, 23-26 July 2012.

218. SHARIFPUR M, NTUMBA T and MEYER JP; Parametric analysis of effective thermal conductivity models for nanofluids, Proceedings of the ASME 2012 International Mechanical Engineering Congress and Exposition (IMECE2012), Houston, Paper number: IMECE2012-85093, 9-15 November 2012.

219. MEYER JP, NWOSU PN, SHARIFPUR M and NTUMBA T; Parametric analysis of effective viscosity models for nanofluids, Proceedings of the ASME 2012 International Mechanical Engineering Congress and Exposition (IMECE2012), Houston, Paper number: IMECE2012-93200, 9-15 November 2012.

65

220. MEYER JP, GROTE K and MCKRELL T; Heat transfer characteristics of multi-walled carbon nanotubes in the transitional flow regime, Proceedings of the 3rd International Forum on Heat Transfer (IFHT2012), Nagasaki, Paper no: 9, 13-15 November 2012.

221. OLAKOYEJO OT, BELLO-OCHENDE T and MEYER JP; Constructal optimisation of conjugate Y-shaped cooling channels with internal heat generation, Proceedings of the 14th Brazilian Congress of Thermal Sciences and Engineering, Rio de Janeiro, 18 – 22 November 2012.

222. PAGE L, BELLO-OCHENDE T and MEYER JP; Geometric optimization for the maximum heat transfer density rate from cylinders rotating in natural convection, Proceedings of the 14th Brazilian Congress of Thermal Sciences and Engineering, Rio de Janeiro, 18 – 22 November 2012.

223. YEKOLADIO P, BELLO-OCHENDE T and MEYER JP; Thermodynamic analysis and performance optimisation

of organic Rankine cycles for the conversion of low-to-moderate grade geothermal heat, Proceedings of the Postgraduate Symposium 2012, Centre for Renewable and Sustainable Energy Studies (CRSES), Stellenbosch, 22 – 23 November 2012.

224. NGO L, BELLO-OCHENDE T and MEYER JP; Exergetic analysis and optimisation of a parabolic dish collector

for low power application, Proceedings of the Postgraduate Symposium 2012, Centre for Renewable and Sustainable Energy Studies (CRSES), Stellenbosch, 22 – 23 November 2012.

225. LE ROUX W, BELLO-OCHENDE T and MEYER JP; Solar tracking for a parabolic dish used in a solar thermal

Brayton cycle, Proceedings of the Postgraduate Symposium 2012, Centre for Renewable and Sustainable Energy Studies (CRSES), Stellenbosch, 22 – 23 November 2012.

226. SHARIFPUR M and MEYER JP; Opportunities in nanofluid composites, Proceedings of the 3rd International Conference on Composites: Characterization, Fabrication and Application (CCFA-3), Tehran, 18 – 19 December 2012.

227. MATHEWS MJ and MEYER JP; Modelling of a domestic paraffin geyser for rural application, Proceedings of the 21st Conference on the Domestic Use of Energy, art no: 6524793, DUE2013, Cape Town, pp. 101-106, 2-4 April 2013.

228. MEYER JP, DIRKER J, OLIVIER JA and GARACH DV (keynote); The influence of different types of inlets on heat transfer of tubes in the transitional flow regime, Proceedings of the International Conference on Advances in Mechanical Engineering, 100 years of Energy, Strength and Precision, Mechanical Engineering Department, College of Engineering, Pune, Paper nr: ICAME-2013/K3, pp. 1 – 10, 29 – 31 May 2013.

229. ROUX S, MEYER JP, MAHMOOD G and ALAM A; Heat transfer in a dimpled short pin-fin array, Proceedings of the 8th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, Lisbon, 16 – 20 June 2013.

230. GROTE K, MEYER JP and McKRELL T; The influence of multi-walled carbon nanotubes on the pressure drop characteristics in the transitional flow regime of smooth tubes, Proceedings of the 8th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, Lisbon, 16 – 20 June 2013.

231. NOLTE HC, BELLO-OCHENDE T and MEYER JP; Second law analysis of a parabolic trough receiver tube for small scale solar thermal application, Fifth International Conference on Applied Energy (ICAE2013), Paper ID: ICAE2013-145, Pretoria, 2 – 4 July 2013.

232. MWESIGYE A, BELLO-OCHENDE T and MEYER JP; Thermodynamic performance of a parabolic trough receiver with centrally placed perforated plate inserts, Fifth International Conference on Applied Energy (ICAE2013), Paper ID: ICAE2013-258, Pretoria, 1 – 4 July 2013.

66

233. BALOYI J, BELLO-OCHENDE T and MEYER JP; The analysis of exergy destruction of a wood fired adiabatic combustor, Fifth International Conference on Applied Energy (ICAE2013), Paper ID: ICAE2013-318, Pretoria, 1 – 4 July 2013.

234. NGO LC, BELLO-OCHENDE T and MEYER JP; Numerical investigation of natural convection of cavity receiver for low power application, Fifth International Conference on Applied Energy (ICAE2013), Paper ID: ICAE2013-322, Pretoria, 1 – 4 July 2013.

235. ADELAJA AO, DIRKER J and MEYER JP; Laminar flow heat transfer in thick walled pipes with convective boundary conditions, Fifth International Conference on Applied Energy (ICAE2013), Paper ID: ICAE2013-408, Pretoria, 1 – 4 July 2013.

236. ADELAJA AO, DIRKER J and MEYER JP; Convective condensation heat transfer of R134a in tubes at different inclination angles, Fifth International Conference on Applied Energy (ICAE2013), Paper ID: ICAE2013-509, Pretoria, 1 – 4 July 2013.

237. MEHRABI M, PASHAEE T, SHARIFPUR M and MEYER JP; Application of genetic algorithm-polynomial neural network for modelling heat transfer and fluid flow characteristics of a double-pipe helical heat exchanger, Proceedings of the ASME2013 Heat Transfer Summer Conference, HT2013, Paper number: HT2013-17194, Minneapolis, 14-19 July 2013.

238. ADELAJA A, DIRKER J and MEYER JP; Condensing heat transfer coefficients for R134a at different saturation temperatures in inclined tubes, Proceedings of the ASME2013 Heat Transfer Summer Conference, HT2013, Paper number: HT2013-17375, Minneapolis, 14-19 July 2013.

239. OLUGBENGA N, SLABBER J, and MEYER JP; Experimental evaluation of natural convection heat transfer in packed beds contained in slender cylindrical geometries, 5th International Conference on Application of Porous Media, Cluj-Napoca, Romania, 25 - 28 August 2013.

240. ADIO SA, SHARIFPUR M and MEYER JP; Investigation into effective viscosity and electrical conductivity of γ-Al2O3-Glycerol nanofluids in Einstein concentration regime, 13th UK Heat Transfer Conference, UKHT2013, Paper nr: 92, Imperial College London, 2 – 3 September 2013.

241. OLAKOYEJO OT, OBAYOPO O, MARTINS L and MEYER JP; Optimisation of multiple-arrays of cylindrical pin-fins for minimum thermal resistance, 13th UK Heat Transfer Conference, UKHT2013, Paper nr: 54, Imperial College London, pp. 54.1 - 54.9, 2 – 3 September 2013.

242. OLAKOYEJO OT and MEYER JP; Constructal optimisation of square pin-fin for minimum thermal resistance, Constructal Law Conference, Nanjing, China, 14-15 October 2013.

243. ADEWUMI OO, BELLO-OCHENDE T and MEYER JP; Geometric optimization of rectangular micro-channel heat sink inserted with micro pin-fins, Constructal optimisation of square pin-fin for minimum thermal resistance, Constructal Law Conference, Nanjing, China, pp. 221 – 232, 14-15 October 2013.

244. NAGAR RK, MEYER JP, ALAM MM, SPEDDING GR and MAHMOOD GI; The turbulent wakes of smooth and dimpled pin-fins, Proceedings of the 21st International Symposium on Air Breathing Engines (ISABE2013), Paper number ISABE-2013-1221, Busan, Korea, 9 – 13 September 2013.

245. NAGAR RK, MEYER JP, ALAM MM, SPEDDING GR and MAHMOOD GI; Numerical investigation of surface enhancement configurations for pin-fins, Proceedings of the 21st International Symposium on Air Breathing Engines (ISABE2013), Paper number ISABE-2013-1222, Busan, Korea, 9 – 13 September 2013.

246. OLAKOYEJO OT and MEYER JP; Constructal optimisation of square pin-fins for minimum thermal resistance, Proceedings of the Constructal Law Conference, pp. 97 – 103, Nanjing University of Science and Technology, Nanjing, China, 14-15 October 2013.

67

247. ADEWUMI OO, BELLO-OCHENDE T and MEYER JP; Geometric optimisation of rectangular microchannel heat sink inserted with micro pin fins, Proceedings of the Constructal Law Conference, pp. 221 – 226, Nanjing University of Science and Technology, Nanjing, China, 14-15 October 2013.

248. MWESIGYE A, BELO-OCHENDE T and MEYER JP; Heat transfer enhancement in a parabolic trough receiver using wall detached tape inserts, Proceedings of the ASME 2013 International Mechanical Engineering Congress and Exposition, IMECE2013, Paper IMECE2013-62745, San Diego, 15 – 21 November 2013.

249. OLAKOYEJO OT, BELO-OCHENDE T and MEYER JP; Optimisation of conjugate elliptical cooling channels with internal heat generation, Proceedings of the ASME 2013 International Mechanical Engineering Congress and Exposition, IMECE2013, Paper IMECE2013-66155, San Diego, 15 – 21 November 2013.

250. EVERTS M, AYRES SR, MULOCK-HOUWER FA, VANDERWAGEN CP, KOTZE N and MEYER JP; The influence of surface roughness in the transitional flow regime of a parabolic through receiver tube, Proceedings of the Second Southern African Energy Conference, Paper 4, Port Elizabeth, 27-29 January 2014.

251. OKAFOR FI, DIRKER J and MEYER JP; Numerical simulation of absorber tubes with non-uniform

circumferential heat flux distributions, Proceedings of the Second Southern African Energy Conference, Paper 10, Port Elizabeth, 27-29 January 2014.

252. VAN DER WESTHUIZEN JE, DIRKER J and MEYER JP, Investigation of heat transfer and temperatures

profiles at inlets and undeveloped flow regions using liquid crystal thermography, Proceedings of the Second Southern African Energy Conference, Paper 16, Port Elizabeth, 27-29 January 2014.

253. ARDEKANI MM, CRAIG KJ and MEYER JP, Response surface method optimization of cavity absorber of a

linear Fresnel reflector, Proceedings of the Second Southern African Energy Conference, Paper 17, Port Elizabeth, 27-29 January 2014.

254. MWESIGYE A, BELLO-OCHENDE T and MEYER JP, Determination of heat flux and temperature distribution in

a parabolic trough receiver at different rim angles and concentration ratios, Proceedings of the Second Southern African Energy Conference, Paper 27, Port Elizabeth, 27-29 January 2014.

255. LE ROUX WG, MWESIGYE A, BELLO-OCHENDE T and MEYER JP, Tracker and collector for an experimental

setup of a small-scale solar thermal Brayton scale, Proceedings of the Second Southern African Energy Conference, Paper 28, Port Elizabeth, 27-29 January 2014.

256. ADELAJA OA, DIRKER J, and MEYER JP, Condensation heat transfer coefficients in inclined tubes,

Proceedings of the Second Southern African Energy Conference, Paper 25, Port Elizabeth, 27-29 January 2014.

257. NGO LC, BELLO-OCHENDE T and MEYER JP, Numerical investigation of natural convection heat loss

suppression in a solar cavity receiver with plate fins, Proceedings of the Second Southern African Energy Conference, Paper 44, Port Elizabeth, 27-29 January 2014.

258. VAN LAAR JH, SLABBER JFM, MEYER JP, VAN DER WALT IJ, PUTS GJ and CROUSE PL; Microwave-Plasma Synthesis of Nano-sized Silicon Carbide at Atmospheric Pressure, 4th International Roundtable on Thermal Plasmas, for Industrial Applications, Marrakech, Morocco, 3 – 7 March 2014.

259. OBAYOPO SO, OLAKOYEJO OT, BELLO-OCHENDE T, MARTINS L, and MEYER JP, Modelling and optimisation of the catalyst layer of a PEM fuel cell using mathematical algorithm, Proceeding of the Fuel Cells 2014 Science & Technology (A Grove Fuel Cell Event) Conference, FUCE 2014, Poster P46, Amsterdam, 3-4 April 2014.

260. NOAH OO, SLABBER JF and MEYER JP; CFD Simulation of natural convection heat transfer from heated micro-spheres and bottom plate in packed beds contained in slender cylindrical geometries, Proceedings of the 6th International Conference on Porous Media, InterPore, University of Wisconsin, 27-30 May 2014.

68

261. ALAM MM, REHMAN S, ALl-HADHRAMI LM and MEYER JP; Extraction of the inherent nature of wind using

wavelets, Proceedings of the 10th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2014), Orlando, pp. 818 – 824, 14 – 16 July 2014.

262. MARIPIA A, SHARIFPUR M and MEYER JP; Investigation into cavity flow natural convection for Al2O3-water nanofluids numerically, Proceedings of the 10th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2014), Orlando, pp. 2392 – 2398, 14 – 16 July 2014.

263. VAN DER WESTHUIZEN JE, DIRKER J and MEYER JP; Investigation into using liquid crystal thermography

for measuring heat transfer coefficients and wall temperature profiles at inlets and underdeveloped regions, Proceedings of the 10th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2014), Orlando, pp. 732 – 740, 14 – 16 July 2014.

264. OLAKOYEJO OT, AJAYI AB, OBAYOPA SA, MARTINS L and MEYER JP; Numerical optimisation of forced convection in a vascularised solid with triangular channels, Proceedings of the 10th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2014), Orlando, pp. 1809 – 1816, 14 – 16 July 2014.

265. OLAKOYEJO OT and MEYER JP; Numerical optimisation of square pin-fins for minimum thermal resistance with non-uniform design dimensions, Proceedings of the 10th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2014), Orlando, pp. 1244 – 1251, 14 – 16 July 2014.

266. LE ROUX WG, BELLO-OCHENDE T and MEYER JP; Optimisation of an open rectangular cavity receiver and recuperator used in a small-scale solar thermal Brayton cycle with thermal losses, Proceedings of the 10th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2014), Orlando, pp. 499 – 507, 14 – 16 July 2014.

267. PRETORIUS HJ, MAHMOOD GI and MEYER JP; Pressure drop along a channel with modified short pin-fins, Proceedings of the 10th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2014), Orlando, pp. 1824 – 1828, 14 – 16 July 2014.

268. ADEWUMI OO, BELLO-OCHENDE T and MEYER JP; Temperature variation on the heated base of a solid substrate cooled with different types of heat sinks, Proceedings of the 10th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2014), Orlando, pp. 68 – 77, 14 – 16 July 2014.

269. YOUSEFI S, SHARIFPUR M and MEYER JP; The effects of uncertainty of nanolayer properties on the heat transfer through nanofluids, Proceedings of the 10th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2014), Orlando, pp. 2381 – 2391, 14 – 16 July 2014.

270. MWESIGYE A, LE ROUX WG, BELLO-OCHENDE T and MEYER JP; Thermal and thermodynamic analysis of a parabolic trough receiver at different concentration ratios and rim angles, Proceedings of the 10th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2014), Orlando, pp. 907 – 915, 14 – 16 July 2014.

271. EVERTS M, EBRAHIM R, KRUGER JP, MILES E, SHARIFPUR M and MEYER JP; Turbulent flow across a rotating cylinder with surface roughness, Proceedings of the 10th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2014), Orlando, pp. 1606 – 1614, 14 – 16 July 2014.

272. NEL G, DIRKER J and MEYER JP; Two-dimensional topology optimization of fluid channel distributions - pressure objective, Proceedings of the 10th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2014), Orlando, pp. 1829 – 1837, 14 – 16 July 2014.

273. MEYER JP (keynote); Heat transfer in tubes in the transitional flow regime, Proceedings of the 15th International Heat Transfer Conference, Kyoto, paper KN03, 10 – 15 August 2014.

69

274. NGO LC, BELLO-OCHENDE T and MEYER JP; Numerical modelling of combined natural convection and surface radiation heat transfer in cavity receiver with plate fins, Proceedings of the 15th International Heat Transfer Conference, Kyoto, paper IHTC15-9869, 10 – 15 August 2014.

275. BURGER FH, DIRKER J and MEYER JP; Topology optimisation for the volume-to-surface problem in a three-

dimensional cubic domain using conduction tooling, Proceedings of the 15th International Heat Transfer Conference, Kyoto, paper IHTC15-9207, 10 – 15 August 2014.

276. OKAFOR IF, DIRKER J and MEYER JP; Numerical study of heat transfer characteristics for different solar flux

distributions on linear Fresnel collector absorber tubes in laminar flow, Proceedings of the 15th International Heat Transfer Conference, Kyoto, paper IHTC15-9221, 10 – 15 August 2014.

277. ADELAJA AO, EWIM DRE, DIRKER J and MEYER JP; Experimental investigation on pressure drop and

friction factor in tubes at different inclination angles during the condensation of R134A, Proceedings of the 15th International Heat Transfer Conference, Kyoto, paper IHTC15-9363, 10 – 15 August 2014.

278. MWESIGYE A, BELLO-OCHENDE T and MEYER JP; Heat transfer enhancement in a parabolic trough

receiver using perforated conical inserts, Proceedings of the 15th International Heat Transfer Conference, Kyoto, paper IHTC15-9150, 10 – 15 August 2014.

279. ADEWUMI OO, BELLO-OCHENDE T and MEYER JP; Comparison between the thermal performance of single

and two-layer microchannels inserted with micro fin pins, Proceedings of the 15th International Heat Transfer Conference, Kyoto, paper IHTC15-9149, 10 – 15 August 2014.

280. ADEWUMI OO, BELLO-OCHENDE T and MEYER JP; Geometric optimisation of multi-layered microchannel

heat sink with different flow arrangements; Proceedings of the 15th International Heat Transfer Conference, Kyoto, paper IHTC15-9148, 10 – 15 August 2014.

281. ADIO SA, SHARIFPUR M and MEYER JP; Investigation into the pH and electrical conductivity enhancement of

MgO – ethylene glycol nanofluids, Proceedings of the 15th International Heat Transfer Conference, Kyoto, paper IHTC15-8604, 10 – 15 August 2014.

282. ADIO SA, SHARIFPUR M and MEYER JP; Combined influence size and sonication on constant shear

viscosity of MgO – ethylene glycol nanofluids, Proceedings of the 15th International Heat Transfer Conference, Kyoto, paper IHTC15-8606, 10 – 15 August 2014.

283. PRINSLOO FPA, DIRKER J and MEYER JP; Heat transfer and pressure drop characteristics in the annuli of

tube-in-tube heat exchangers (horizontal lay-out), Proceedings of the 15th International Heat Transfer Conference, Kyoto, paper IHTC15-9225, 10 – 15 August 2014.

284. TSHIMANGA N, SHARIFPUR M and MEYER JP; The effect of sonication time on effective thermal conductivity

of Glycerol-MgO based nanofluids, Proceedings of the 15th International Heat Transfer Conference, Kyoto, paper IHTC15-8595, 10 – 15 August 2014.

285. GARACH DV, DIRKER J and MEYER JP; Inlet flow effects in microchannels on single-phase heat transfer

coefficients and friction factors, Proceedings of the 15th International Heat Transfer Conference, Kyoto, paper IHTC15-9210, 10 – 15 August 2014.

286. ROUX SM, MAHMOOD G and MEYER JP; Modified endwall fluid flow in a dimpled pin fin array for heat

transfer enhancement, Proceedings of the 15th International Heat Transfer Conference, Kyoto, paper IHTC15-9230, 10 – 15 August 2014.

287. MAHDAVI M, SHARIFPUR M and MEYER JP; Comparative study on simulation of convective AL2O3-water and

ZrO2-water nanofluid by using Ansys-Fluent, Proceedings of the 15th International Heat Transfer Conference, Kyoto, paper IHTC15-9196, 10 – 15 August 2014.

70

288. ADELAJA AO, DIRKER J and MEYER JP; Experimental studies of condensation heat transfer in an inclined microfin tube, Proceedings of the 15th International Heat Transfer Conference, Kyoto, paper IHTC15-9361, 10 – 15 August 2014.

289. MEHRABI M, SHARIFPUR M and MEYER JP; Convective heat transfer characteristics of low concentrations

CuO-water nanofluid in the turbulent flow regime based on artifitial intellegent models, Proceedings of the 15th International Heat Transfer Conference, Kyoto, paper IHTC15-8461, 10 – 15 August 2014.

290. EVERTS M, AYRES SR, MULOCK-HOUWER FA, VANDERWAGEN CP, KOTZE NM and MEYER JP; The

influence of surface roughness on heat transfer in the transitional flow regime, Proceedings of the 15th International Heat Transfer Conference, Kyoto, paper IHTC15-8338, 10 – 15 August 2014.

291. MAHMOOD GI and ACHARYA S; Blade and vane leading edge fillet on endwall cooling in linear turbine

cascades, Proceedings of the 15th International Heat Transfer Conference, Kyoto, paper IHTC15-9553, 10 – 15 August 2014.

292. STEYN M and MEYER JP ; Heat transfer coefficients for tubes in the turbulent single phase flow regime with a focus on uncertainty, Proceedings of the 15th International Heat transfer Conference, Kyoto, paper IHTC15-9250, 10-15 August 2014.

293. ROUX SM, MAHMOOD GI and MEYER JP; Flow field around dimpled short pin-fins in a staggered array, Proceedings of 29th Congress of the International Council of the Aeronautical Sciences, St. Petersburg, paper 2014-0302, 7 – 12 September 2014.

294. OLAKOYEJO OT, OBAYOPA SO, MARTINS L and MEYER JP; Numerical optimisation of rectangular pin-fins

for minimum thermal resistance with non-uniform design dimensions, Proceedings of the 2014 ASME International Mechanical Engineering Congress and Exposition, Montreal, paper number IMECE2014-38841, 14 – 20 November 2014.

295. MWESIGYE A, BELLO-OCHENDE T and MEYER JP; Thermal performance of a parabolic through receiver with perforated conical inserts for heat transfer enhancement, Proceedings of the 2014 ASME International Mechanical Engineering Congress and Exposition, Montreal, paper number IMECE2014-39849, 14 – 20 November 2014.

296. NOAH OO, SLABBER J and MEYER JP; Natural convection heat transfer phenomena in packed bed systems, Proceedings of the 2014 ASME International Mechanical Engineering Congress and Exposition, Montreal, paper number IMECE2014-38694, 14 – 20 November 2014.

297. SHARIFPUR M, MAHDAVI M and MEYER JP; CFD Simulation to find porous multilayer limitation of the

vacuum infusion process, Proceedings of the 4th International Conference on Composites: Characterization, Fabrication and Application (CCFA-4), Tehran, 16 – 17 December 2014.

298. SHARIFPUR M, ADIO SA and MEYER JP; Nanofluid composites: preparation and rheology behaviour for vacuum infusion process, Proceedings of the 4th International Conference on Composites: Characterization, Fabrication and Application (CCFA-4), Tehran, 16 – 17 December 2014.

299. ALAM MM, REHMAN S, AL-HADHRANI LM, RUSSEL M and MEYER JP; Quantifying the contributions of different time-scales to wind speed using wavelets, Proceedings of the International Conference on Mechanical Industrial and Energy Engineering, paper number ICMIEE-PI-140386, Khulna, Bangladesh, 25 – 26 December 2014.

300. ARDEKANI MM, CRAIG KJ and MEYER JP; A novel computational approach to the combine optical and thermal modelling of a linear Fresnel collector receiver, Proceedings of the Third Southern African Solar Energy Conference, Skukuza, Kruger National Park, pp. 272 - 277, 11 – 13 May 2015.

71

301. MARSBERG J, CRAIG KJ and MEYER JP; Central solar receiver CFD modelling utilising generated heliostat field heat flux maps, Proceedings of the Third Southern African Solar Energy Conference, Skukuza, Kruger National Park, pp. 531 - 536, 11 – 13 May 2015.

302. CRAIG KJ, LE ROUX WG and MEYER JP; Computational fluid dynamics analysis of parabolic dish tubular cavity receiver, Proceedings of the Third Southern African Solar Energy Conference, Skukuza, Kruger National Park, pp. 260 - 265, 11 – 13 May 2015.

303. MARAIS M, CRAIG KJ and MEYER JP; Computational investigation of worst-case wind loads on a heliostat pod for different reflector aspect ratios, Proceedings of the Third Southern African Solar Energy Conference, Skukuza, Kruger National Park, pp. 525 - 530, 11 – 13 May 2015.

304. EWIM D and MEYER JP; Condensation heat transfer coefficients of enhanced tubes, Proceedings of the Third Southern African Solar Energy Conference, Skukuza, Kruger National Park, pp. 230 - 235, 11 – 13 May 2015.

305. LE ROUX WG and MEYER JP; Experimental testing of a tubular cavity receiver for a small-scale solar thermal Brayton cycle, Proceedings of the Third Southern African Solar Energy Conference, Skukuza, Kruger National Park, pp. 295 - 300, 11 – 13 May 2015.

306. EVERTS M and MEYER JP; Heat transfer characteristics of developing flow in the transitional flow regime of a solar receiver tube, Proceedings of the Third Southern African Solar Energy Conference, Skukuza, Kruger National Park, pp. 224 - 229, 11 – 13 May 2015.

307. OKAFOR IF, DIRKER J and MEYER JP; Laminar flow heat transfer for asymmetrical non-uniform heat flux distributions on horizontal circular tubes, Proceedings of the Third Southern African Solar Energy Conference, Skukuza, Kruger National Park, pp. 76 - 81, 11 – 13 May 2015.

308. MWESIGYE A, BELLO-OCHENDE T and MEYER JP; Numerical investigation of the effect of slope errors and specularity errors on the thermal performance of a solar parabolic trough collector system, Proceedings of the Third Southern African Solar Energy Conference, Skukuza, Kruger National Park, pp. 88 - 93, 11 – 13 May 2015.

309. RUNGASAMY A, CRAIG KJ and MEYER JP; Receiver optimization for an Etendue conserving compact linear

Fresnel, Proceedings of the Third Southern African Solar Energy Conference, Skukuza, Kruger National Park, pp. 266 - 271, 11 – 13 May 2015.

310. POULAIN P, CRAIG KJ and MEYER JP; Variation of the height of centreline of a heliostat and influence on the

wind loading, Proceedings of the Third Southern African Solar Energy Conference, Skukuza, Kruger National Park, pp. 543 - 548, 11 – 13 May 2015.

311. BASEER MA, MEYER JP, REHMAN S and ALAM MS; Wind resource assessment for an industrial city in Saudi Arabia, Proceedings of the 11th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2015), Skukuza, pp. 332–337, 20 – 23 July 2015.

312. NDENGUMA DD, DIRKER J and MEYER JP; Heat transfer and pressure drop characteristics of a horizontal

annular passage in the transitional flow regime, Proceedings of the 11th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2015), Skukuza, pp. 539–544, 20 – 23 July 2015.

313. SHARIFPUR M, ADIO SA and MEYER JP; Experimental investigation on the viscosity, electrical conductivity and PH of SiO2-ethylene glycol nanofluids , Proceedings of the 11th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2015), Skukuza, pp. 199–204, 20 – 23 July 2015.

314. MAHDAVI M, GHOSINEZHAD H, SHARIFPUR and MEYER JP; Boundary condition investigation for cavity flow natural convection, Proceedings of the 11th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2015), Skukuza, pp. 813–818, 20 – 23 July 2015.

72

315. ADELAJA AO, DIRKER J and MEYER JP; Experimental studies of heat transfer coefficient and pressure drop inclined condensing units, Proceedings of the 11th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2015), Skukuza, pp. 49–53, 20 – 23 July 2015.

316. ADELAJA AO, DIRKER J and MEYER JP; Experimental investigation of frictional pressure drop in inclined tubes, Proceedings of the 11th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2015), Skukuza, pp. 36-41, 20 – 23 July 2015.

317. BALOYI J, BELLO-OCHENDE T and MEYER JP; Optinum diameter of a circulating fluidised bed combustor with negative wall heat flux, Proceedings of the 11th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2015), Skukuza, pp. 80–89, 20 – 23 July 2015.

318. OLAKOYEJO OT, OBAYOPO SO, AJAYI AB, MARTINS L and MEYER JP; Numerical optimisation of conjugate hexagonal cooling channels with internal heat generation using AL2O3-water nanofluid, Proceedings of the 11th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2015), Skukuza, pp. 845–851, 20 – 23 July 2015.

319. MUJANAYI KATUMBA J-M, BELLO-OCHENDE T and MEYER JP; Optimal configuration and thermal performance of heated rectangular blocks under forced convection with volume constraints, Proceedings of the 11th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2015), Skukuza, pp. 884–893, 20 – 23 July 2015.

320. GROBLER C, SHARIFPUR M, GHODSINEZHAD H, CAPITANI R and MEYER JP; Experimental study on

cavity flow natural convection in a porous medium, saturated with an Al2O3 60% EG-40% water nanofluid, Proceedings of the 11th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2015), Skukuza, pp. 828–832, 20 – 23 July 2015.

321. GARBADEEN ID, SHARIFPUR M, SLABBER J and MEYER JP; Numerical study on natural convection of

MWCNT nanofluids in a enclosure based on experimental conductivity an viscosity, Proceedings of the 11th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2015), Skukuza, pp. 493–498, 20 – 23 July 2015.

322. SHARIFPUR M, GHODSINEZHAD H, MEYER JP and ROLFES H; Investigation on ultrasonicaton energy

density effect on characterization of zinc oxide (ZnO) nanoparticle size distribution with using Zeta-sizer, Proceedings of the 11th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2015), Skukuza, pp. 211–216, 20 – 23 July 2015.

323. OLIVIER SP, MEYER JP, DE PAEPE M and DE KERPEL K; Measured void fraction and heat transfer coefficients during condensation, Proceedings of the 11th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2015), Skukuza, pp. 408–416, 20 – 23 July 2015.

324. SHARIFPUR M, MEYER JP and HIKMET SA; Nanofluids; opportunities and challenges, Proceedings of the 11th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2015), Skukuza, pp. 217–220, 20 – 23 July 2015.

325. EVERTS M and MEYER JP; Heat transfer of developing flow in the transitional flow regime, Proceedings of the 1st Thermal and Fluid Engineering Summer Conference, New York City, paper number TFESC-12660, 9 – 12 August 2015.

326. MEYER JP, LE ROUX WG, and BELLO-OCHENDE T (keynote); The micro-turbine: a solar-to-electricity solution, Proceedings of the International Conference on Clean Energy for Sustainable Growth in Developing Countries, Palapye, 16 – 18 September 2015.

327. MENTZ S, MEHRABI M, SHARIFPUR M, and MEYER JP; Humidification and dehumidifaction processes: advantages and disadvantages, Proceedings of IMECE15, 2015 ASME International Mechanical Engineering Congress and Exposition, Houston, Paper IMECE2015-50903, 13 – 19 November 2015.

73

Contributions at conferences or special lectures (no proceedings) 1. MEYER JP, LIEBENBERG L and OLIVIER JA; (invited lecture) Heat transfer and pressure drop inside tubes

with different inlet geometries in the transitional flow regime, American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Seminar 77 (Advanced: Recent Advances in Heat Transfer and Fluid Flow), Orlando, Florida, 23 – 27 January 2010.

2. MEYER JP, BELLO-OCHENDE T and IGHALO FU; (invited lecture), Optimization of microchannels and micro-fin heat sinks with computational fluid dynamics in combination with a mathematical optimization technique, One-day International Workshop on Recent Advances in Thermal Engineering (RATE 2011), Bengal Engineering and Science University, Shibpur, Kolkata, India, 22 March 2011.

3. MATHEBULA IS and MEYER JP, Logitudinal pitch spacing on perforated tubes with flow injection as a friction reducing method, Emerging Researcher Symposium, CSIR, 13 October 2011.

4. ROUX S, MEYER JP and ALAM M; Heat transfer and flow field in a rectangular channel equipped with dimpled, short pin-fins, International Aerospace Symposium of South Africa (IASSA), Pretoria, 26 – 28 September 2011.

5. MEYER JP and GROTE K; Nanotubes as heat transfer medium in high performance aerospace heat exchangers, International Aerospace Symposium of South Africa (IASSA), Pretoria, 17 – 18 September 2012.

6. MEYER JP, LIPS S, ADELAJA AO and DIRKER J; Condensation heat transfer in aerospace, International Aerospace Symposium of South Africa (IASSA), Pretoria, 17 – 18 September 2012.

7. LE ROUX WG, MEYER JP, and BELLO-OCHENDE W; Solar thermal power generation using the Brayton cycle, German South African Research Lecture Series: 'Energy Sciences', German Academic Exchange Service (DAAD), Tshwane University of Technology, Pretoria, 10 April 2013.

8. MEYER JP (invited lecture); Heat transfer in the transitional flow regime, I2CNER seminar series for first-rate researchers, International Institute for Carbon-neutral Energy Research, Kyushu University, 8 August 2014.

Editorials, Editor of special issues and editor of published proceedings 1. MEYER JP (Editor); Proceedings of the First International Conference on Heat Transfer, Fluid Mechanics and

Thermodynamics, Vol 1, Part 1, HEFAT2002, Skukuza, Kruger National Park, South Africa, ISBN: 0-86970-536-9, 8 to 10 April 2002.

2. MEYER JP (Editor); Proceedings of the Second International Conference on Heat Transfer, Fluid Mechanics

and Thermodynamics, CD-Rom with 250 papers, HEFAT2003, Livingston, Zambia, ISBN: 0-620-30503-7, 23 to 25 June 2003.

3. MEYER JP and STEHLIK P, (Special issue); Selected papers from the First HEFAT Conference, Special

Issue: Selected Papers Presented at the First International Conference on Heat Transfer, Fluid Mechanics, and Thermodynamics (HEFAT), Held on 8 – 10 April 2002, Kruger National Park, South Africa, Heat Transfer Engineering, Vol. 24, No. 6, pp. 1 –2, 2003.

4. MEYER JP (Editor); Proceedings of the Third International Conference on Heat Transfer, Fluid Mechanics and

Thermodynamics, CD-Rom with 150 papers, HEFAT2004, Cape Town, ISBN: 1-86854-519-9, 21 to 23 June 2004.

5. MEYER JP and STEHLIK P (Special issue); Editorial: Selected papers from the Second HEFAT Conference,

Heat Transfer Engineering, Vol. 26, No. 7, pp. 1 – 2, 2005. 6. MEYER JP and MALAN AG (Editors); Proceedings of the Fourth International Conference on Heat Transfer,

74

Fluid Mechanics and Thermodynamics, CD-Rom with 420 papers, HEFAT2005, Cairo, Egypt, ISBN: 1-86854-624-1, 19 to 22 September 2005.

7. MEYER JP (Special issue); Selected papers from the Third HEFAT conference (Editorial), Heat Transfer

Engineering, Vol. 27, No. 8, page 1, 2006. 8. MEYER JP and SANDENBERGH RF (Special issue); The University of Pretoria’s School of Engineering,

Special issue as part of 50 year celebrations of the School of Engineering, SA Journal of Science, Vol. 102, No. 11/12, page 506, 2006.

9. MEYER JP (Guest Editor, editorial); Selected papers from the HEFAT2005 conference, Experimental Heat

Transfer, Vol. 20, No. 2, page 85, 2007. 10. MEYER JP (Special issue); Selected papers from the Fourth HEFAT conference (Editorial), Heat Transfer

Engineering, Vol. 28, No. 7, pp. 603 - 604, 2007. 11. MEYER JP (Editor); Proceedings of the Fifth International Conference on Heat Transfer, Fluid Mechanics and

Thermodynamics, CD-Rom with 200 papers, HEFAT2007, Sun City, South Africa, ISBN: 978-1-86854-6435, 1 to 4 July 2007.

12. MALAN AG and MEYER JP (Guest-Editors and editorial); International Journal for Numerical Methods in Heat

and Fluid Flow, Special section: Selected papers from the 4th Annual Heat Transfer, Fluid Dynamics and Thermodynamics (HEFAT) Conference 2005, Vol. 18, No. 2, pp. 109 - 110, 2008.

13. LIEBENBERG L and MEYER JP (Editorial); Objective Classification of Two-Phase Flow Regimes, Heat

Transfer Engineering, Vol. 29, No, 1, pp. 1 - 2, 2008. 14. MEYER JP (Editor); Proceedings of the Sixth International Conference on Heat Transfer, Fluid Mechanics and

Thermodynamics, CD-Rom with 150 papers, HEFAT2008, Pretoria, South Africa, ISBN: 978-1-86854-691-6, 30 June to 2 July 2008.

15. MEYER JP (Guest Editor, editorial); Selected papers from the fifth HEFAT conference, Heat Transfer

Engineering, Vol. 30, No. 7, pp. 1-2, 2009. 16. MEYER JP (Editor); Proceedings of the Seventh International Conference on Heat Transfer, Fluid Mechanics

and Thermodynamics, CD-Rom with 450 papers, HEFAT2010, Antalya, ISBN: 978-1-86854-818-7, Turkey, 19 – 21 July 2010.

17. MEYER JP (Editorial); Selected papers from the Sixth HEFAT conference, Heat Transfer Engineering, Vol. 32,

No. 2, pp. 87-89, 2011.

18. MEYER JP (Editorial); Selected papers from the Seventh HEFAT conference – heat transfer, fluid mechanics, and thermodynamics in society, Heat Transfer Engineering, Vol. 33, No. 14, pp. 1143-1147, 2012.

19. MEYER JP (Editor); Proceedings of the Eight International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, CD-Rom with 150 papers, HEFAT2011, Mauritius, ISBN: 978-1-86854-948-1, 11 – 13 July 2011.

20. MEYER JP (Editor); Proceedings of the Ninth International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, CD-Rom with 260 papers, HEFAT2012, Malta, ISBN: 978-1-86854-986-3, 16 – 18 July 2012.

21. CHENG L, CELATA GP, GHAJAR A, JACOBI AM, KARAYIANNIS TG, MEYER JP, MINKOWUCZ WJ, QUIBEN JM, PARK JE, REVELIN R, RIBATSKI G, URSENBACHER T, WOJTAN L, YANG CY and ZUN I; In Celebration of Professor John Richard Thome on his 60th birthday, International Journal of Heat and Mass Transfer, Vol 58, No. 1-2, pp. 1-2, 2013.

75

22. MEYER JP; Preface: International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics 2012,

Computational Thermal Sciences, Vol. 5, No. 2, 2013.

23. MEYER JP (Editorial); Heat transfer, fluid mechanics and thermodynamics, Heat Transfer Engineering, Vol. 34, No. 14, pp. 1141-1146, 2013.

24. MEYER JP (Editorial): Preface: International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics 2012, Computational Thermal Sciences, Vol. 5, No. 2, 2013.


26. MEYER JP (Editorial): Preface: Heat transfer fluid mechanics, and thermodynamics in our environment – HEFAT2012, Heat transfer engineering, Vol. 35, No. 16-17, pp. 1389 – 1393, 2014.

27. MEYER JP, SKEWS B, SAHA SK, WINTER F, DU TOIT J, STEHLIK P, MARTIN H, LIENHARD JH, BEJAN A, VADASZ P, VON BACKSTRÖM T, HARMS T and REUTER H; In memoriam Prof Detlev Gustav Kröger, Heat Transfer Engineering, Vol. 36, No. 4, pp. 429 – 431, 2015.


Articles submitted for review 1. OLUGBENGA N, SLABBER J and MEYER JP; Theoretical and experimental investigation of natural convection

heat transfer in packed beds contained in slender cylindrical geometries, Nuclear Engineering and Design, submitted on 5 March 2014.

2. OLAYINKA OA, BELLO-OCHENDE T and MEYER JP; Multi-layered numerical optimisation of stacked

rectangular microchannel heat sink, International Journal of Heat and Mass Transfer, manuscript number: HMT-D-14-01300, submitted on 1 July 2014.

3. BELLO-OCHENDE T and MEYER JP; Constructal design and mathematical optimization of multiple-arrays of

micro-pin fins, Central European Journal of Engineering, manuscript number: CEJE-D-14-00056, submitted on 9 October 2014.

4. MAHDAVI M, SHARIFPUR M and MEYER JP, Simulation study of convective and hydrodynamic turbulent

nanofluids by turbulence models, International Journal of Thermal Sciences, manuscript number: THESCI-D-14-01082, submitted on 29 October 2014.

5. NOAH O, SLABBER JF and MEYER JP; Modelling a porous region for natural convection heat transfer and

experimental validation in slender cylindrical geometries, Nuclear Engineering and Design, submitted on 13 December 2014.

6. OKAFOR FI, DIRKER J and MEYER JP; Mixed Convection Heat Transfer Coefficients and Friction Factors for a Linear Fresnel Solar Collector Absorber Tube in Laminar Flow for Non-uniform Heat Flux Distributions, Solar Energy, submitted on 15 December 2014.

7. NOAH O, SLABBER JF and MEYER JP; Theoretical and experimental investigation of natural convection heat

transfer in packed beds contained in slender cylindrical geometries, Nuclear Engineering and Design, submitted on 19 January 2015.

76

8. YIANNOU A, PRETORIUS J, SLABBER J, MEYER JP, GROTE W, ATANASOVA M; Quantitative confirmation of the phase structures of Natural Graphite and model definition, Journal of Materials Science, submitted on 13 February 2015.

9. KOORTS JM, BELLO-OCHENDE T and MEYER JP; Entropy Generation Minimisation (EGM) of Industrial Heat Exchanger, International Journal of Energy, submitted on 15 February 2015

10. BORMAN W, DIRKER J, ARNDT D and MEYER JP; Operational energy minimisation for forced draft, direct-

contact bulk air cooling tower through a combination of forward and first-principle modelling, coupled with an optimisation platform, International Journal of Energy, submitted on 28 March 2015.

11. ADEWUMI OO, BELLO-OCHENDE T and MEYER JP; ADEWUMI OO, Numerical investigation into the thermal

performance of single microchannels with varying axial length and different shapes of micro pin-fin inserts, Heat Transfer Engineering, manuscript number: HTE-7115, submitted on 28 May 2015.

12. MWESIGYE A, HUAN Z, BELLO-OCHENDE T, and MEYER JP; Influence of optical errors on the thermal and

thermodynamic performance of a solar parabolic trough receiver, Solar Energy, submitted on 2 June 2015.

13. MONTGOMERY TC, BELLO-OCHENDE T and MEYER JP; Optimal distribution of discrete heat sources in a two-dimensional data centre, Heat and Mass Transfer, manuscript number HAMT-D-15-0027, submitted on 4 June 2015.

14. MAHDAVI M, SHARIFPUR M and MEYER JP; Experimental and numerical investigation on a water-filled cavity

natural convection to find proper thermal boundary conditions for simulation, submitted to International Journal of Heat and Mass Transfer, manuscript number: HMT-2015-517, submitted on 8 July 2015.

15. NOAH OO, SLABBER J and MEYER JP; Numerical simulation of natural convection heat transfer and transport in an enclosed slender tube geometrical model containing heated micro-spheres. Lead-way towards new nuclear fuel design, Nuclear Engineering and Design, submitted on 30 July 2015.

16. GARBADEEN I, SHARIFPUR M and MEYER JP; Experimental study on natural convection of MWCNT nanofluids in a square enclosure, International Journal of Heat and Mass Transfer, manuscript number: HMT-2015-865, submitted on 14 August 2015.

17. MOHDAVI M, SHARIFPUR M, GHODSINEZHAD H and MEYER JP; Experimental and numerical study on thermal and hydro-dynamic characteristics of laminar natural convective flow inside a rectangular cavity with water, EG-water and air, International Communications in Heat and Mass Transfer, manuscript number: CJ15/6625, submitted on 22 August 2015.

18. ADIO SA, SHARIFPUR M and MEYER JP; Experimental investigation and model development for effective viscosity of MgO-ethylene glycol nanofluids by using dimensional analysis, FCM-ANFIS and GA-PNN techniques, International Journal of Heat and Mass Transfer, submitted on 8 September 2015.

19. BALOYI J, BELLO-OCHENDE T and MEYER JP; Wall heat flux and air inlet temperature influences on the

thermodynamic optimisation of irreversibilities of a small scale circulating fluidised bed combustor, Energy, submitted on 12 October 2015.

20. BASEER MA, MEYER JP, REHMAN S and ALAM MM; GIS-based site suitability analysis for wind farm development in Saudi Arabia, Applied Energy, submitted on 17 November 2015.

21. PAGE L, DIRKER J and MEYER JP; Topology optimization for the conduction cooling of a heat-generating volume with anisotropic material, International Journal of Heat and Mass Transfer, submitted on 4 January 2015.

22. BASEER MA, REHMAN S, MEYER JP, and ALAM MM; Wind power characteristics of seven data collection sites in Jubail, Saudi Arabia using Weibull parameters, Renewable Energy, submitted on 6 January 2015.

77

Consulting reports to industry (selected) 1. MEYER JP; Calculation of the heat flow from rock surfaces into a stope working area, Chamber of Mines

(COMRO), 1989. 2. MEYER JP and LE GRANGE L; The use of scoops to improve ventilation at the coal face of coal mines, Chamber

of Mines (COMRO), 1990. 3. MEYER JP; The simulation of the flow field through the inlet of a reactor with computational fluid dynamics,

SASOL, 1991. 4. MEYER JP; The numerical prediction of the flow field in the vicinity of the economiser banks of a boiler, Eskom,

1992. 5. MEYER JP; The numerical prediction of the flow field in the vicinity of a gasifier outlet, SASOL, 1993. 6. MEYER JP and GREYVENSTEIN GP; An investigation into the existing compressed air system of the South

African Airways, 1995. 7. MEYER JP, TSHIMANKINDA M and MEYER JP; Potential for hot-water heating with heat pump reticulation in the

domestic sector – techno-economic study, project no: EO 9517, Department of Energy and Mineral Affairs, 1996. 8. MEYER JP; Strategy for the establishment of an energy performance contracting (EPC) industry in South Africa,

project no: ED9607, Department of Energy and Mineral Affairs, 1996. 9. MALAN AG, VISSER CJ and MEYER JP; Continuum Thermodynamic Modelling of a Pebble-Bed Modular

Reactor: Governing Equations and Discretization Methodology”, for North-West University and PBMR, Report nr. 0401, 26 pages, 2004.

10. PATTINSON J, MALAN AG and MEYER JP; Development of a fast non-conforming Cartesian mesh Euler

solver for application to missile design, Client: Denel Aerospace Systems (Pty) Ltd, BE at UP, 2005. 11. LIEBENBERG L, CHRISTIAANS M, VAN ROOYEN E and MEYER JP; Propulsion Systems: a review of the

state-of-the-art in ground-vehicle propulsion systems and fuels, Client: Eskom, BE at UP, 174 pages, 2006. 12. MALAN AG, VISSER CJ and MEYER JP; Continuum thermodynamic modelling of a pebble-bed modular

reactor, Client: North-West University and PBMR, Report no 0607, 106 pages, 2006. 13. DIRKER J and MEYER JP (design and report review); Thermal heat sink performance investigation, Client:

Addictive Racing Development, 18 pages, 2009.

Non-scholarly lectures

1. MEYER JP; Education and Training of Engineers in South Africa, South African Institute of Mechanical Engineers, Central Branch, Technical presentation and dinner event, Johannesburg, 17 April 2013.

university of pretoria · h coetzee 2001 heat transfer and pressure drop characteristics of angled...

Documents