icde wien 2016 english neu - mwdental.hu...preparation of crowns and veneer. dental impression and...

International Center for Dental Education | Ivoclar Vivadent | Vienna | Austria

GET INSPIRED

2016COURSES & LECTURES

ENGLISH

2

Ivoclar Vivadent operates in three product areas. In these three areas we offer dentists and dental

technicians products and product systems that support them across the entire treatment and

fabrication process and enable them to achieve esthetic results.

Three areas of strength

CONTENT

Courses for the practice ................................. 8

Courses for the practice and laboratory ........... 9 - 13

Courses for the laboratory ............................. 14 - 25

Course calendar ............................................... 26 - 27

Registration .................................................. 28

Facilities for hire ....................................... 29

How to find us .......................................... 31

3

COUSES AN WORKSHOPS

Learning by head, hand and heart.Johann Heinrich Pestalozzi

4

Dear Ladies and Gentlemen,

nowadays, knowledge is the factor which has to be continously

strengthend and used in order to stay competitive in today's environ-

ment. Technological change in the dental field represents a major challen-

ge for everyone involved in the entire process chain.

State-of-the-art technology with regards to dental practices and dental

laboratories as well as highly trained employees are required by today's

patients.

The ICDE Vienna ist now existing for more than one and a half years. The

first half of 2016 is offering again, a perfect combination out of trainings

for dentists, dental technicians and assistants. We would like to take this

opportunity to introduce ourselves as your new contacts within ICDE Vien-

na. We are gladly at your disposal and assist you with all course informati-

on necessary as well as individual tailor-made solutions.

We would like to invite you to take a look into our versatile course offer.

We would be delighted to welcome you at one of our events.

Martina Jakob Hannes Meischl

Head of ICDE Trainer ICDE

5

Leading through Knowledge

Teamwork between dentist and technician resembles the dance of a couple.I'm the one with the high heels.Florin Stoboran (Dental technician)

COURSES AND WORKSHOPS

7

Dates 14/15 or 21/22 March, 23/24 May,

5/6 September or 5/6 December

Duration 9.00 am to 5.00 pm

Instructor Assoc. Prof. Marko Jakovac, DMD, MSc, PhD

Fee EUR 400 VAT incl.

Treatment Planning and Esthetic Rehabilitation in Fixed Prosthodontics

PR

AC

TIC

E

Looking from many aspects, prosthetic rehabilitation is very a complex treatment and should always start with detailed treatment

planning. This course will focus on treatment planning procedures and will give tips and tricks how to avoid possible failures in

prosthodontic therapy.

First day of the course will focus on planning part: case analysis, dental inspection, x-ray analysis, dental photography and commu-

nication with dental laboratory. After the initial communication and delivery of dental impressions and face bow transfer, dental

technician can start with the wax up planning. Wax up is evaluated by means of mock up in the oral cavity and then dentist and

dental technician can proceed with the final treatment plan. During the first day participants will make their treatment planning

on models, via x-ray and digital photography, which will also include basics of digital smile design.

The second day will start with material selection for oral rehabilitation. After that participant will have hands on for all ceramic

preparation of crowns and veneer. Dental impression and cord techniques will be presented after the preparation procedures.

Finally, participants will do try-in and cementation of all ceramic crown and veneer with resin cements.

First day

- dental examination; biotype, initial treatments, post and core

- dental photography and DSD

- x-ray analysis

- wax up and mock up

Second day

- material selection

- tooth preparation; all ceramic crown and veneer

- master dental impressions

- face bow transfer and bite registration

- try in

- cementation8

This course is supported by Zeiss Company

with master microscope, table-microscopes

and magnifying glasses

Date 25 April or 3 September


Instructor Dr. Florin Cofar


The 3D-Architecture of Smile Design

This is an advanced DSD and treatment planning course showing an overall vision on esthetic and digital dentistry, as well as step-

by-step protocols for an efficient implementation in the clinical reality.

It will present the overall vision on inderdisciplinary treatments, the workflows and treatment protocols. You will learn a more clini-

cal and simplified version of DSD. You will learn to transfer the design into actual treatment using various guides for implants, sur-

gery, orthodontic treatment or CAD-CAM.

You will learn how to document efficiently, at high-end quality and how to design, in a simple way, feasible and easy to translate

into a treatment plan and actual treatment.

We focus on what happens beyond design, and how we make sure the design we are planning will end up in the beautiful picture

at the end of each case, all of these in step-by-step protocols.The most important concept of all approached here is the smile as an

expression of emotion and how does that affect the perspective of smile design. Patient's motivation explained. The neuroscience

behind decision making and the perception of beauty.

Perception of beauty and expression

- Lecture on the concept of beauty, in connection with the expression

- DSD (Digital Smile Design) - concept and use

- Creating a DSD environment shaped for time efficient implementation

- Interdisciplinary case presentation

- Connecting the DSD protocol to Surgery, CAD-CAM & Ortho

- Foto & Video use in DSD , protocol for high-end material

- LIVE demo (on patient)

- Video mock-up - LIVE demo (on patient)

- Treatment planning, clinical and logistic protocols

PR

AC

TIC

E +

LA

BO

RA

TO

RY

9

Date 22 – 24 April or

7 - 9 October


Instructor Milos Miladinov


Dental Photography - Shoot Like a Pro

Photography is a useful tool for dentists and dental technicians. Pictures help to record information which can be very valuable for

the preparation of esthetic and natural restorations. In modern dentistry digital work processes are more and more adopted. Digi-

tally processed pictures can make the planning easier and ensure a predictable outcome.

Also the power of dental photography as a marketing tool has to be taken in consideration.

A high-quality homepage with pictures of complex work or single work stages to clear processing steps will emphasize your exper-

tise and support you during patient consultations.

All these different possibilities will be explained and demonstrated during this course. Practical exercises will be done together.

Dental Photography is not a trend, is the way I work, it's a must!

DAY 1

- Theoretical part: Introducing the camera; Basic photography

- Dental photography specifics & accessories

- Facebook marketing through photos

- Calibrating & setting the camera

- Intraoral photography & laboratory photography

- Colour determination photos

- Tooth slice cross polarisation

- Smile makeover necessary photos & video

PR

AC

TIC

E +

LA

BO

RA

TO

RY

10

DAY 2

- Introducing smile makover

- Starting & Setting macbook for Keynote (incl. daily work hands-on)

- Using Keynote to create logos

- Smile makover hands-on

- Aesthetics wax-up – demo, Creating silicone key after wax-up - hands-on

- Mock-up technique - LIVE DEMO

- Creating & editing posters after mock-up

- Editing emotional presentation for patient

DAY 3

- Portrait & close-up – theory & hands-on

- B&W portraits hands-on

- Extreme make-up session

- Artistic close-up session

- Glamour portrait session

- Creating posters in keynote - hands-on

- Final editing in aperture

- How to create a small presentation video

11

PR

AC

TIC

E +

LA

BO

RA

TO

RY

Success doesn't exist off the rack.

12

Date 23 – 25 June


Instructor Dr. Florin Cofar


Supranatural: Anterior CAD/CAM Restorations with Natural Algorithms

Complete SKYN workflow-anterior CAD-CAM restorations

The course teaches how to obtain natural shapes and textures directly from the CAD-CAM system, using a digital workflow, with-

out touching the restorations after milling. SKYN is a recipe for individualised, unique smiles. Through this protocol we start to see

the smile from a different angle, to build a harmony of natural, imperfect shapes and textures.

You will learn to replace the symmetry with balance and you will learn to understand the natural optical illusions and designing

imperfection.

The whole process is revealed step-by-step, from design, choosing the shapes and the harmony of the smile, to particular tech-

niques for preparation, impression, isolation and cementing for CAD-CAM, demistyfing digital design. Laboratory stages, with

focus on the 3D painting technique, and in the end, object photography (various techniques for photographing the veneers) and

final photo shooting in the studio. All these stages will be taught both by lecturing and by live demonstration.

Day 1

- Theoretical lectures and Over the shoulder (combined)

- Planning with SKYN & DSD - specific techniques

- Starting workflow: Scanning (before), Preparations, Scanning (after prep), Impression

- Details and tips for CAD-CAM workflow

Day 2

- Lectures Over the shoulder (combined)

- Lab over the shoulder: (has to be done by the technician): 3D Painting, Finishing, Glazing

- Try-in

Day 3

- Photo-shooting - product photography

- Over the shoulder - Cementation

- Final photo-shoot with the patient

PR

AC

TIC

E +

LA

BO

RA

TO

RY

CACAM

D

13

Dates 4 March or 14 October


Instructor Helmut Berger


3shape Advanced

This module provides specific advanced training for the 3shape DentalDesigner™ Software with step by step guiding through the

construction process to prepare the milling procedure (CAM). Digital conversion in the area of implant constructions and the

advantages, like tension freedom, biocompatibility, soft tissue management and natural aesthetics are a main focus of this

training.

Course content

- Theoretical introduction of the Zenotec CAD/CAM system

- Telescope

- Attachments

- Multiple abutments

- Screw retained bridges

- Implant bar

- Send to CAM

The construction will be trained on already scanned models.

CACAM

D

14

LA

BO

RA

TO

RY

15

Gingiva Tango

Let‘s Dance in Pink and White

This course is based on the study and definition of the shading of colours of the gingival tissue, creating the texture and the colour

of the gingiva, natural aspect of the crowns morphology.

In the workshop we will try to achieve perfection of teeth ride, which we will reconstruct in their original form. Achiving esthetics

will be more difficult to obtain, because of massive bone resorption on the right incisors.

To follow this we will make a bridge with a structure of zirconium - from tooth 43 until tooth 33 - with the four incisors intermedi-

aries, requiring the application of a large-scale artificial gum are, made from the versatile lab-composite SR Nexco.

The first part will be centered on lecture of clinical cases, in what we analyze different shape of lower anteriors.

In the presentation on the layering technique, we focus on both basic colours provided in the kits from IPS Ivocolor Shade and

Stains, IPS e.max Impulse and SR Nexco Gingiva.

Main objectives of the workshop

- Individualization of zirconium and if required on the gum

- Detailed study of form and function of lower incisors

- Layering technique and processing with IPS e.max

- Texture and glaze of an esthetical white part

- Techniques and principles of individualization: colours and imitation the texture of gingival tissue;

- Simple and basic settings for photography with black and white background LA

BO

RA

TO

RY

Dates 14/15 March


Instructor Florin Stoboran


Date 18 March


Instructor Juergen Seger


IPS e.max Press Multi Micro-Layering

16

LA

BO

RA

TO

RY

Mimicking Natural Teeth

In this course, the benefits of using the micro-layering technique in combination with IPS e.max Press Multi to achieve efficient and

esthetic results will be demonstrated.

When working in the esthetic zone (veneers, crowns), it is advantageous to use the IPS e.max Press Multi material as it provides a

substructure that exhibits a transition from dentin opacity to enamel translucency.

The micro-layering technique enables special colour and translucency effects to be achieved without compromising the overall

resistance of high-strength all-ceramic restorations.

The utilization of the facial micro-layering concept significantly improves the workflow efficiency. It allows users to successfully

match existing natural teeth or fabricate multiple-unit restorations that result in harmonious new smiles.

Main objectives of the workshop

Participants will fabricate an anterior crown/veneer. They will experience how effective, esthetic results can be achieved with effi-

cient processes without compromising overall strength.

- Criteria for the selection of the IPS e.max Press Multi material

- Suitable substructure design for micro-layering

- Coordination of basic colour and value to match neighbouring teeth

- Artistic application of internal colour and translucency effects

- Practicing the effective micro-layering concept

- Efficient fabrication of restorations with lifelike esthetics

Date 4/5 April


Instructor Michele Temperani


IPS InLine - Master Workshop

On this two days course you will be shown advanced techniques and procedures to enable you to create stunning results with the

IPS InLine system.

The course will use a central incisor and a 3-unit anterior bridge and take you through correct preparation of the alloy as well as the

correct application of the opaque. Margin ceramic will be used and then you will move onto advanced teachings and techniques

of all of the IPS InLine ceramic and its components.

Using Deep Dentine as well as Impulse colors you will learn how to match more complicated shade requirements, this will be com-

bined with teachings on creating and improving your ability to do surface texture, individual characterization, glazing and polish-

ing. This course is aimed primarily at mid to experienced ceramists and will greatly improve your workings with the IPS InLine

ceramic system.

Course content

- Learn the correct techniques to design your framework and understand its importance

- Learn the correct way to prepare your alloy framework prior to applying IPS InLine ceramic

- Ensure maximum bond strength as well as perfect masking when applying IPS InLine opaque

- Improve your understanding of how using Deep Dentin materials affect your processes when matching shades

- Learn the correct layering process as well as advanced ceramic application

- Discover how impulse ceramics can enable you to match more complicated shades

- Ensure you are using the best firing cycles to achieve optimum results with IPS InLine

- Understand how best to create lifelike surface texture and glaze to fired restorations

- Fully understand the possible uses for the InLine system as well as all of its components

The workshop will be rounded off with tips and tricks that help you to ensure efficient and effective procedures in

esthetic dentistry. 17LA

BO

RA

TO

RY

Dates 15/16 April or 25/26 November


Instructors Helmut Berger

Vjekoslav Budimir


3shape | Zenotec Select Hybrid | IPS e.max CAD

This module provides training in basic CAM functions associated with the

Zenotec Select wet milling. Participants will learn the steps for installing and set-

ting up the Milling System. The hands-on portion of the course will cover the pro-

cess for importing CAD data into the CAM software and milling the files.

Introduction of the IPS e.max CAD system and material characteristics.

Presentation of the correct selection of the IPS e.max CAD block that will give pre-

dictable results. Object preparation and explanation of the different coloring

options for IPS e.max CAD material. Staining and coloring of a Posterior Molar

with IPS e.max Shades/Essence

In the afternoon both restorations are crystallised in the Programat and finished with IPS e.max Ceram. The modular construction

and many application possibilities of the IPS e.max system will be shown to the participant in theory and practise.

Course content

- Scanning and constructing with 3shape of the tooth 21 in the cut-back design

- Scanning and constructing with 3shape of the tooth 26 full-anatomically

- Integrate/sending the two crowns file in the Wieland CAM software

- Milling the IPS e.max CAD crowns with the Zenotec Select Hybrid

- Crystallization, layering, stain- and glaze firing of the crown

CACAM

DCACA

18

LA

BO

RA

TO

RY

Date 28/29 April


Instructor Annette v. Hajmasy, MDT


SR Nexco Flask Press

Veneered in a jiffy

Modern lab composites offer outstanding material and processing properties, a beautiful optical appearance and good clinical

behaviour. Compared to ceramic material, composites are force-absorbing, and this has a positive influence on the chewing

behaviour. Therefore, composite resins are ideal for the veneering of implant-supported restorations. The more extensive the

tooth replacement, the more important the previous analysis and planning by means of a wax-up.

By using the press technique with composite, this wax-up can be converted into the final veneer on either a metal or zirconium

oxide framework. However, a reconstruction of the gingiva is often also required, particularly in implant cases. Therefore, the three

important basic elements of the composite veneering technique are addressed in this course:

- Manual veneering of metal frameworks

- Pressing over zirconium or metal, incl. implant cases

- Reconstruction of the gingiva

Participants will learn how to apply the press technique in conjunction with composite and how to accurately convert diagnosti-

cally planned work (the wax-up or mock-up) into the final restoration. Moreover, the course will provide insight into the different

application possibilities for composite in comparison with ceramics by conveying theoretical knowledge about the material quali-

ties. A pressed-over bridge will be complemented with SR Nexco Gingiva. Moreover, a metal crown will be veneered with SR Nexco

composite materials.

Course objective: application of the flask technique and handling of SR Nexco flask / the cut-back technique / staining and charac-

terization / creation of shape and surface texture / Contouring of lifelike gingival portions / theoretical information about lab com-

posite / achieving a shade match with SR Phonares II / manual veneering in accordance with the IPS e.max shade system.

20

LA

BO

RA

TO

RY

Dates 3 June or 10 October

Duration 9.00 am to 5.00 pm / to 12.00

Instructors Helmut Berger

Vjekoslav Budimir


Natural Esthetics with Zenostar

All digital - all options

Get to know the stability, flexibility and the high esthetic of the Wieland Zenostar

Zirconia system within this workshop. The special raw material mixture for

improved mechanical and optical characteristics ensure restoration solutions,

which fulfill challenges of demanding cases.

Together different indications will be designed in the 3shape Dental Designer, inte-

grated and grinded in the CAM software.

The simple color reproduction will be achieved by using the infiltration technology. Together the usage of different color solutions

will be trained. To be able to check the result , the scaffolding will be sintered overnight and then sent to the participants.

Prefabricated restaurations will be partially veneered in the afternoon or finished with the painting technique using the new uni-

versal colors and glazes of IPS Ivocolor.

Morning

- Scan and design a bridge and a full monolithic single tooth within the 3shape DentalDesigner

- Calculation of a bridge with the CAM software

- Milling of a restoration

- Prepare and color / infiltrate of restoration

Afternoon

- Part veneers with IPS e.max Ceram on prefabricated frameworks

- stain and glaze firing with IPS Ivocolor

CACAM

DCACA

21

LA

BO

RA

TO

RY

22

Soloists love to break ranks.

Balancing the Brightness in Prosthetic Restorations

A good way to understand the brightness of a tooth is finding translucency proportion of it. Irrespective of the desired colour and

translucency, regardless of the thickness of the primary structure, in different types of preparations: minimally invasive, invasive

and non-invasive, the highest esthetical requirements with true-to-nature light scattering and a balanced relationship between

brightness and chroma.

This workshop will demonstrate the versatility of the IPS e.max Press and Ceram, with a wide range of colours and materials, exem-

plifying this on a model of restoration of a front group and posterior 2 crowns in full-anatomical pressed, will be individualized dif-

ferently, with two types of colorations, through a simple and understandable technique – staining technique – which can be used

both in the front group, as well as a laterally group.

In this workshop I will show you tips and tricks for ingot selection depending of the thickness of preparation, colour of the abut-

ment and final colour of restoration, layering techniques adapted so that prosthetic restoration should re-establish the properties

of the natural tooth, both morphology, function and coloristic, then try to copy it, with a inside layer that should recover the value

and initial fluorescence.

- How to choose the right ingots in relative to the prep's (kind and color);

- Explaining staining technique;

- Shade matching in critical color situation and controlling translucency;

- Processing more accurate three-dimensional anatomical shape;

- Glaze and controlling the gloss

Dates 29/30 September


Instructor Florin Stoboran


LA

BO

RA

TO

RY

23

Date 7/8 Oktober


Instructor Michele Temperani


Master in Metal-Free

IPS e.max lithium disilicate

In the past few years, patients have become increasingly interested in esthetic restorative procedures. As a result, the demand for

all-ceramic restorations has risen greatly. By employing innovative ceramic components, such as the new lithium disilicate translu-

cent materials, new esthetic options for creating exceptional true-to-nature restorations regardless of the fabrication technique

can be achieved. However, the characteristic that make new materials more integratable from an esthetics perspective, the trans-

lucency of the substructure, is also the most controversial limit. This feature adds a new evaluation parameter, which is essential for

all projects that involve the use of metal-free as a prosthetic solution, especially in the anterior sectors.

In the course Ingots selection criteria will be addressed.

In this workshop, we will finalize 3 units: one central incisor, one lateral incisor and one canine. Throughout the course each tech-

nical phase will be individually photographed. The digital photographs will be immediately inserted into a digital presentation in

order to perform a step-by-step critical analysis of the form and color results of our restorations before proceeding with the next

phase.

The following topics will be addressed in the course

Presentation of the system components | Ingot selection criteria | Shading options | Control of absorption and reflection

Adjustment of different translucencies | Ceramic firing | Shaping and shading by means of an additive layering technique

Imitation of natural surface textures | Glaze firing – corrective firing | Mechanical polishing to achieve an optimized surface gloss

The workshop will be rounded off with tips and tricks that help you to ensure efficient and effective procedures in

esthetic dentistry.

24

LA

BO

RA

TO

RY

Date 27/28 October


Instructor Csilla Andraskova


IPS e.max Ceram

All you need for natural-looking restorations

All ceramic materials are state-of-the-art and are of great importance in the today's lab. Also patients request life-like esthetics,

biocompatibility and longevity of the restorations placed. Framework materials made out of lithium-disilicate as well as fluor apa-

tite ceramics are available for individual creations in a wide range.

The ingots offered within the IPS e.max Press system are available in four levels of translucency and Impulse shades and thus pro-

vides expressive esthetic features. The ingots are matched to each other and offer different opacity and translucency levels. The

selection is based on the clinical requirement of the patient (die colour, desired tooth colour) and depending on the preferred pro-

cessing technique. In this course a theoretical introduction on the IPS e.max system will be given supplemented by practical exam-

ples of use. An overview on the indication range will be presented as well as information on colour, translucency, opacity and opal-

escence of the press ingots. In the workshop part different processing techniques will be demonstrated and trained such as layer-

ing technique, cut-back technique and staining technique.

Content

- Press procedure and modelling (if required with demonstration)

- Individualization, characterization and glazing with IPS Ivocolor

- Processing techniques of IPS e.max restorations with IPS e.max Ceram

- Layering technique with IPS e.max Impulse

- Cut-back technique on veneer with IPS e.max Impuls material

- Staining technique on thin veneer with IPS Ivocolor

LA

BO

RA

TO

RY

25

MARCH

4 March 3shape Advanced Course CAD/CAM 14

14/15 March Gingiva Tango - let's Dance in Pink and White Workshop 15

14/15 March Treatment Planning and Esthetic Rehabilitation in Fixed Prosthodontics Workshop 8

18 March IPS e.max Press Multi Micro-Layering Workshop 16

21/22 March Treatment Planning and Esthetic Rehabilitation in Fixed Prosthodontics Workshop 8

APRIL

4-5 April IPS InLine Master Workshop Workshop 17

15/16 April 3shape/Zenotec Select Hybrid/IPS e.max CAD CAD/CAM 18

22-24 April Dentall Photography - Shoot Like a Pro Workshop 10/11

25 April The 3D-Architecture of Smile Design Workshop 9

28/29 April SR Nexco Flask Press Workshop 20

MAY

23/24 May Treatment Planning and Esthetic Rehabilitation in Fixed Prosthodontics Workshop 8

JUNE

3 June Natural Esthetics with Zenostar CAD/CAM 21

23-25 June Supranatural: Anterior CAD/CAM Restorations

with Natural Algorithms Workshop 13

... continue on pageCourses listed by date

26

SEPTEMBER

3 September The 3D-Architecture of Smile Design CAD/CAM 9

5/6 September Treatment Planning and

Esthetic Rehabilitation in Fixed Prosthodontics Workshop 8

29/30 September Balancing the Brightness in Prosthetic Restorations Workshop 23

OCTOBER

7/8 October Master in Metal-Free Workshop 24

7-10 October Dental Photography - Shoot Like a Pro Workshop 10/11

10 October Natural Esthetics with Zenostar CAD/CAM 21

14 October 3shape Advanced Course CAD/CAM 14

27/27 October IPS e.max Ceram Workshop 25

NOVEMBER

25/26 Novermber 3shape/Zenotec Select Hybrid/IPS e.max CAD CAD/CAM 18

DECEMBER

5/6 December Treatment Planning and

Esthetic Rehabilitation in Fixed Prosthodontics Workshop 8

27

... continue on page

Please view online all current dates and get an overview of further education and training opportunities

as well as access to the online application form at http://www.ivoclarvivadent.at/icde

Please view online all current dates and get an overview of

further education and training opportunities as well as

access to the online application form at

http://www.ivoclarvivadent.at/icde

Course documentsREGISTRATIONAll informational materials, apparatus and instruments will be

made available free of charge. We ask participants to bring Sandra Rammahtheir own work clothes, set of instruments and grinding tools ICDE Wien, Ivoclar Vivadentwith them. Techt Gate Vienna | Donau-City-Strasse 1

1220 ViennaOther costsPhone: +43 (0)1 263 191 10, Fax: +43 (0)1 263 191 111Travelling and accommodation costs must be covered by the E-Mail: [email protected]. Lunch meals are included in the course fee for Web: www.ivoclarvivadent.atthe duration of the course.

Course feesHotel accommodationFour weeks before the beginning of the course you will We are glad to help you with the booking if you need hotel receive an invoice for settling of the course fees. Reservation accommodation. Hotel rooms can be booked with three on the course will become binding only upon receipt of the contract hotels at reduced prices. payment. Please transfer the corresponding amount to the

following account: Arcotel Kaiserwasser (within walking distance)Commerzbank AG WienWagramer Strasse 8 | 1220 Wien |Phone +43 (0)1 2242 40

IBAN: AT73 1967 5001 0100 8100Price per person EUR 102,-* incl. breakfast

SWIFT: COBAATWX

Ibis Messe Wien (two underground stations away)Applicable law

Lassallestrasse 7a | 1020 Wien | Phone +43 (0)1 217700Venue and cancellation terms

Price per person EUR 80,-* incl. breakfastFor this agreement, its commencement and the legal

consequences, Austrian law applies exclusively. Legal venue *Subject to errors and alterations

is Vienna. A cancellation fee of 70 % of the course fee will be

issued for cancellations made upon 14 days prior to the Course duration

course start.9.00 am until 5.00 pm, unless otherwise announced.

In the event of a short notice cancellation or non-

appearance, the full course fee will be charged. A replace-Upon completion of the course every participant will receive a

ment participant can, of course, be registered. certificate.

Should the implementation of a course become impossible,

we reserve the right to cancel the event or postpone it.

Any fees which have already been paid will be reimbursed.

Claims for compensation cannot be made.

The course instructors reserve the right to make changes to

the program.

AP

PLI

CA

TIO

N |

FU

RTH

ER

IN

FOR

MA

TIO

N

28

Facilities for hire and training courses tailored to your needs

At your request we organize individual training courses customized

to your needs. You can also rent our premises at the ICDE and host

your own events or meeting. The modern infrastructure, central

location and convenient connection to the transport network make it

an ideal choice for your events.

The following facilities are available to hire out:

! Clinical treatment unit with the possibility of

video transmission

! Two laboratories with a place for demonstrators and eleven

working stations equipped with 90-inch display screens

in full HD resolution

! Conference room for up to 35 persons

! Equipment for video transmission in all rooms

! Premises for presentations: 16:9, 4:3, 3:1

We are looking forward to providing you with an individual offer

customized to your needs.

29

Advanced Education for Individualists

30

HOW TO USE PUBLIC TRANSPORTATION FROM AIRPORT HOW TO FIND US... VIENNA-SCHWECHAT

The airport shuttle bus operates from 7.10 am to 8.10 pm in a ICDE60 minutes interval. Exit at the stop Kaisermühlen – Vienna Ivoclar VivadentInternational Centre.Tech Gate Vienna | Donau-City-Strasse 1The City Airport Train (CAT) connects the Vienna-Schwechat 1220 Viennaairport with the city air terminal in Landstraße (city district

Wien Mitte). The schedule and current fares can be found at Parking garage www.cityairporttrain.com.Austria Centre Vienna (5 min. walking distance)

rate: EUR 10,- per day*Travelling by car – via A22

Take exit Vienna International Centre – Donau City.Tech Gate Vienna (in-house parking garage)

Short-time parking rate EUR 2,50* per hour of part thereof-Travelling by car – from the city centreMaximum daily charge EUR 25,-*. Turn left towards Donau City at the first traffic light after you Subject to errors and alterations

have passed Reichsbrücke.

ACCESS

UNDERGROUND

U1-station Kaisermühlen – Vienna International Centre, exit

Schüttaustraße. You will reach us via sidewalk in about two

minutes.

TRAIN

Take the U1 underground line from the main station

towards Leopoldau. Get off at the stop Kaisermühlen –

Vienna International Centre. From there take exit

Schüttaustraße.

At Westbahnhof take the U3 underground line towards Sim-

mering. At Stephansplatz change to U1 towards Leopoldau

until the stop Kaisermühlen – Vienna International Centre.

From there take exit Schüttaustraße.

New Danube

International Centre,then Donau City

31

Direction airport

Exit

Donau-City-Strasse

Exit Donau City

ICDE Wien | International Center for Dental Education WienIvoclar Vivadent GmbH

Tech Gate Vienna

Donau-City-Strasse 1

1220 Vienna

Austria

Phone +43 (0)1 263 191 10

Fax +43 (0)1 263 191 111

E-Mail [email protected]

Web www.ivoclarvivadent.at

ww

w.F

OO

CU

S.a

t

icde wien 2016 english neu - mwdental.hu...preparation of crowns and veneer. dental impression and...

Documents