table of contentsdownload.gongkong.com › file › company › 10316 › sst_product_catalo… ·...

Table ofContents

SST Overview ............................................Network Listing .....................................

SST Network Toolsfor AS-Interface .......................................

for ControlNet ...........................................for DeviceNet ..............................................

for Ethernet ..................................................for GE Fanuc ....................................................

for Interbus .......................................................for Profibus ........................................................

for Rockwell Automation .....................................for Schneider Electric .............................................

for Siemens .............................................................Trade Organizations and Programs ...............................

Communication Partners ................................................Network Interface Cards .....................................................

for CANopen ...................................................................for ControlNet ...................................................................

for DeviceNet .......................................................................for Interbus ..........................................................................

for Profibus .............................................................................for Rockwell Automation Networks .........................................

for Schneider Electric Networks ................................................for Siemens Networks ..................................................................

PLC Network Modules .........................................................................for AS-Interface ................................................................................

for DeviceNet .....................................................................................for INTERBUS ........................................................................................

for Profibus ...........................................................................................for Rockwell Automation Networks .......................................................

Network Diagnostic and Configuration Software .......................................Data Servers ....................................................................................................

Network Gateways & Protocol Converters ......................................................Industrial Network to Industrial Gateway ......................................................Adapter for S7 Communications Port ...........................................................

I/O Simulation Software ........................................................................................PICS Simulation Sofrware ...................................................................................

Embedded Network Solutions ..................................................................................Universal Communication System .........................................................................

Slave Modules ..........................................................................................................Master Modules ........................................................................................................

Developers’ Tools .............................................................................................................Network Components .......................................................................................................

SST Product Warranty ..........................................................................................................SST Product CE Compliance ..................................................................................................

Other SST Materials ...................................................................................................................Contact SST .................................................................................................................................

15

6789101112131415171925273135434955616567697175778185919799107109111117119123127129133137138139142

SST™ understands network communications.With expertise in more than 40 networks andwith more than 60 industrial network experts in-house, SST is the #1 independent supplier ofindustrial communication products.

Since 1985, the world’s leading companies havetrusted SST to provide them with innovativecommunication technology and world-class support and service.

Whether you’re an end-user, systems integratoror OEM, we have the solutions for your plantfloor communication needs. Our innovativetechnologies keep you connected with the ever-growing number of industrial protocols.

With offices in North America, Europe andAsia, and 24/7 technical support, SST is readyto respond when and where you need us.

SST is a trusted world leader with many firsts:- 1st company worldwide to pass Profibus DP

Master Certification Test- 1st company worldwide to pass DeviceNet

ODVA Conformance Test- 1st company to offer a 10 year warranty on

industrial networking interface cards- 1st company to develop Profibus Multi-slave

technology- 1st independent company to develop

ControlNet protocol technology

SST has also been the recipient of many prestigious awards:- Innovation Award in 1991 from the Canadian

Government- Highly Commended Award in 1996 by the

UK Manufacturing Industry Achievement Awards

- 50 Best Managed Private Company Award in Canada for 1997

- Selected as a Design Engineering Awards- Editors’ Choice for our Universal

Communication System in 1998- Editors’ Choice for our Universal

Communication System in 1999

Company Profile

The World Leader in Multi-NetworkConnectivity

Over 40 Industrial Networks Supported

-1-

Woodhead Industries, Inc. (NASDAQ: WDHD)is a global leader in connectivity and workplacesafety products. The company develops, manufactures, and markets specialty electricaland electronic products, primarily to serve theindustrial automation and control market withconnectivity solutions. Woodhead Industries consists of a family of mutually supportive companies that serve specialized niches of theglobal industrial market. Woodhead Industries’thousands of products include electrical, electronic, fiber optic, and ergonomic products.They are special-function, non-commodity products marketed to a growing list of international users. Founded in 1922 as a

manufacturer and marketer of specialty industrial electrical products, the company nowemploys more than 1,300 people in 16 locationsand 10 countries.

Woodhead Industries sells products in two distinct markets; the automation and controlsmarket and the safety/productivity/electricalmarket. The businesses selling to the automationand controls industry fall under the WoodheadConnectivity marketing umbrella. Each providesan extensive product line that it designs andmanufactures - both physical media and softwarefor connecting devices.

Woodhead Industries and SST

SST History

SST started in 1985 as the high-tech division ofSutherland-Schultz. This division was purchasedand established as S-S Technologies in 1992.The products division of S-S Technologies started operating under the trade name SST in1997 as part of a repositioning strategy aimed atbetter serving the global market. In 1998 SSTwas acquired by Woodhead Industries Inc.(NASDAQ: WDHD) and is now positioned

together with Brad Harrison® and mPm™ aspart of a global industrial communication andconnectivity group called WoodheadConnectivity.

More information about Woodhead Industriesand Woodhead Connectivity is available at thefollowing Web Sites: www.woodhead.com andwww.woodheadconnectivity.com

SST has forged strategic alliances with severalindustry leaders in the global industrial controlsmarket.

SST Communication PartnersSST’s Communication Partners program promotes the relationship between SST andcompanies who create hardware and softwareproducts using SST products for connectivity toindustrial networks. Together, we are workingtogether to provide network connectivity formany industrial applications including PC Control (SoftLogic), operator interfaces, HMI,SCADA, data acquisition and PLC programming.

Other Companies’ ProgramsSST products are also referenced in other companies’ programs, including Adept MVP,GE Accompany, Intellution ICAP Premier,

Rockwell Automation Encompass, SchneiderAlliances, VenturCom, and WonderwareWondertools programs.

Trade OrganizationsSST is an active member of AS-Interface, CANin Automation (CiA), ControlNet International,Industrial Automation Open NetworkingAlliance (IAONA), Interbus Club, OPCFoundation, Open DeviceNet VendorAssociation (ODVA), and Profibus International.

Being a recognized leader, SST occupies boardlevel seats for ControlNet International, IAONA,ODVA and Profibus International.

No other company worldwide participates in allthese network authorities. These roles reinforceSST’s technical knowledge and commitment tothese technologies.

SST is Well Connected

-2-

Woodhead Connectivity is committed to leadingthe industry with innovative industrial communications and connectivity backed bysuperior service and support. WoodheadConnectivity can deliver any type of connectivity solution for controlling and monitoring all processes on the factory floor.This plant floor connectivity allows you to integrate the plant floor data with managementand customer support systems. Our solutionsfacilitate the evolving needs of industry worldwide, as it moves toward extending factoryautomation with open systems.

SST - World leader in connectivity solutions forindustrial networks. Products include interfacecards, embedded network solutions, I/O simulation software, PLC network modules, network gateways and protocol converters, andsoftware tools.

Brad Harrison - World leader in specialty electrical and electronic connectivity products,such as industrial connectors and cable, for inputdevices on the factory floor. Specializing in custom products, Brad Harrison also has over11,000 stock items available. Their products primarily serve the industrial automation and control market.

mPm - World leader in connectivity solutions foroutput devices, including the means for remoteactuation of solenoid valves on the factory floor.mPm products offer quick disconnect featuresand benefits similar to Brad Harrison.

Rely on SST and Woodhead Connectivity, yoursingle source connectivity and communicationsolutions backed by superior service and support.

Woodhead Connectivity

Woodhead Connectivity Automation Solutions

-3-

Providing communication products for over 40industrial networks, SST has the largest depthand breadth of products of any third-partyprovider of industrial network technology.

Network Interface CardsSST Network Interface Cards connect a computer directly to an open industrial network.Networks include: CANopen, ControlNet,DeviceNet, Interbus and Profibus, as well as net-works from Rockwell Automation (Allen-Bradley, Reliance), Schneider Electric(Modicon), and Siemens. Computer architecturessupported include ISA, PCI, Compact PCI, PCCard (PCMCIA), PC/104, and VME.Applications include PC Control,HMI/OI/SCADA, data acquisition, motion con-trol and programming software.

PLC Network ModulesSST PLC Network Modules allow you to connect a programmable controller to different industrial networks. PLCs supported includeAllen-Bradley PLC-5, SLC 500, GE Fanuc Series90-70, and Reliance AutoMax. Networks sup-ported include Allen-Bradley DH/DH+/RIO,AS-Interface, DeviceNet, Interbus, Profibus andReliance AutoMax DCS/RIO. SST also interfaces Siemens ET200S I/O to DeviceNet.

Network Diagnostic and Configuration SoftwareSST Network Diagnostic and ConfigurationSoftware allows you to monitor, diagnose andconfigure your network. These software programs are available for SST NetworkInterface Cards and PLC Network Modules.

Data ServersSST Data Servers include OPC and DDEServers used to integrate your software application with SST Network Interface Cards.

Network Gateways / Protocol ConvertersSST Network Gateways are stand-alone productsthat provide a communications solution betweentwo otherwise incompatible industrial networksor between a manufacturer’s device and anindustrial network.

I/O Simulation SoftwareSST I/O Simulation Software (PICS) allows youto perform control systems testing and operatortraining before you go online. Using PICS youcan quickly create a dynamic model on a PCthat duplicates the behavior of the actual processand provides the control software with simulateddevice feedback. By simulating your process,you will save time and money, manage technicaland scheduling risks associated with a project,minimize process downtime and greatly enhanceoperator training.

Embedded Network SolutionsSST Embedded Network Solutions provideOEMs and device manufacturers with tools tointegrate industrial network connectivity intotheir products quickly.

Embedded Network SolutionsUniversal Communication System (UCS) - is anembedded network interface system for manufacturers of industrial automationproducts. It features a selection of small,inexpensive network modules with a commoninterface to the host product. Manufacturersno longer require separate programmingefforts for each network protocol they wish tosupport. By simply implementing the UCSclient interface once, a manufacturer can plugand play with all industrial networkssupported by master or slave UCS modules.Some device applications include sensors,motion controllers, actuators and valves,scales, operator interfaces, flow meters, anddrives.

Network ComponentsNetwork Components include the IP67Industrial Ethernet MINI Connector from theWoodhead Connectivity product line.

SST Product Families

-4-

SST Network Tools for AS-Interface

-6-

Embedded Network SolutionsSST’s Universal Communication System (UCS)is an embedded network interface system formanufacturers of industrial automation products.It features a selection of small, inexpensivenetwork modules with a common interface tothe host product. Manufacturers no longerrequire separate programming efforts for eachnetwork protocol they wish to support. Bysimply implementing the UCS client interfaceonce, a manufacturer can plug & play with allindustrial networks supported by master or slaveUCS modules.

SST and AS-InterfaceSST is a member of AS-Interface.

PLC Network ModulesSST provides a connectivity solution from anAllen-Bradley SLC 500 to AS-Interface.

SST Network Tools for ControlNet

Network Interface CardsSST Network Interface Cards allow you toconnect a computer directly to ControlNet.Computer bus formats currently supportedinclude ISA, PCI, PC/104 and VME. SSTControlNet Interface Cards are ControlNetconformance tested.

Network Diagnostic and ConfigurationSoftwareIdentify problems and configure yourControlNet network using SST’s ControlNetNetwork Analyzer, Configuration Tool andNetwork Capture Utility.

Network Gateways / Protocol ConvertersSST’s X-Link allows you to create a bridgebetween ControlNet and any of the 45 networkscurrently supported.

-7-


Data ServersUse SST’s OPC Server for ControlNet tointegrate SST’s ControlNet ISA, PCI andPC/104 interface cards with OPC Clients.

SST and ControlNetSST is an active member of ControlNetInternational. SST holds elected seats on boththe Advisory Board and Technical ReviewBoard. SST is a Rockwell AutomationControlNet VADP (Value Added DevelopmentPartner) and was the first independent companyto develop ControlNet chip technology.

SST Network Tools for DeviceNet

Network Interface CardsSST Network Interface Cards allow you toconnect a computer directly to DeviceNet.Computer bus formats currently supportedinclude ISA, PCI, PC/104, PC Card (PCMCIA),Compact PCI and VME. SST DeviceNetInterface Cards are available in standard andPro formats. SSTDeviceNet Prointerface cards areideal for PCscannerapplications whenfast scan times andhigh performanceare required. SST DeviceNet Interface Cardsare DeviceNet conformance tested.

Network Diagnostic and ConfigurationSoftwareIdentify problems and configure your DeviceNetnetwork using SST’s DeviceNet NodeCommissioning Tool, DeviceNet Analyzer andMonitor.

PLC Network ModulesSST PLC Network Modules allow you toconnect your otherwise incompatibleprogrammable controller to DeviceNet.

Data ServersUse SST’s OPC Server for DeviceNet tointegrate SST’s DeviceNet Interface Cards withOPC Clients.

-8-

Network Gateways / Protocol ConvertersSST’s X-Link allows you to create a bridgebetween DeviceNet and any of the 45 networkscurrently supported.

Embedded Network SolutionsSST’s Universal Communication System (UCS)is an embedded network interface system formanufacturers of industrial automation products.It features a selection of small, inexpensivenetwork modules with a common interface tothe host product. Manufacturers no longerrequire separate programming efforts for eachnetwork protocol they wish to support. Bysimply implementing theUCS client interface once,a manufacturer can plug &play with all industrialnetworks supported bymaster or slave UCSmodules.

SST and DeviceNetSST is an active member of the Open DeviceNetVendor Association (ODVA). SST holds electedseats on the ODVA Advisory Board and asChief Technical Officer. SST was the firstcompany to pass DeviceNet ODVAconformance testing.

Network Gateways / Protocol ConvertersSST’s X-Link allows you to create a bridgebetween Ethernet and any of the 45 networkscurrently supported. Protocols currentlysupported include Allen-Bradley, GE andModicon Ethernet.

I/O Simulation SoftwareSST’s PICS Simulation Software enables you toperform control systems testing and operatortraining. Create a dynamic model on a PC thatduplicates the control software with simulateddevice feedback. By simulating your process,you will save time and money, manage thetechnical and scheduling risks associated with aproject, minimize process downtime and greatlyenhance operator training.

SST Network Tools for Ethernet

-9-

Embedded Network SolutionsSST’s Universal Communication System (UCS)is an embedded network interface system formanufacturers of industrial automation products.It features a selection of small, inexpensivenetwork modules with a common interface tothe host product. Manufacturers no longerrequire separate programming efforts for eachnetwork protocol they wish to support. Bysimply implementing the UCS client interfaceonce, a manufacturer can plug & play with allindustrial networks supported by master or slaveUCS modules. UCS supports the ModiconEthernet protocol.

Network ComponentsWoodhead Connectivity’s RJ-LNXXTM Ethernetconnector is the world's only IP67 ratedEthernet connector solution using existingcommercial RJ-45 technology. This uniquesolution consists of a male and female connectorusing the MINI form factor.

Woodhead Connectivity offers IndustrialEthernet Category 5 cable with a specialpolyurethane coating for harsh industrialenvironments.


SST and GE FanucSST products are referenced in GE Fanuc’sAccompany Program.

SST Network Tools for GE Fanuc

PLC Network ModulesSST PLC Network Modules allow you toconnect your GE Fanuc Series 90-70programmable controller to otherwiseincompatible industrial networks and I/Odevices.

Network Gateways / Protocol ConvertersSST’s X-Link allows you to create a bridgebetween certain GE Fanuc networks and any ofthe 45 networks currently supported.

-10-


SST and InterbusSST is a member of the Interbus Club.

SST Network Tools for Interbus

Network Interface CardsSST Network Interface Cardsallow you to connect acomputer directly to Interbus.Computer bus formats currentlysupported include ISA, PC/104and VME.

PLC Network ModulesSST PLC Network Modulesallow you to connect yourotherwise incompatibleprogrammable controller to Interbus.

Network Gateways / Protocol ConvertersSST’s X-Link allows you to create a bridgebetween Interbus and any of the 45 networkscurrently supported.

-11-

SST Network Tools for ProfibusNetwork Interface CardsSST Network Interface Cards allow you toconnect a computerdirectly to Profibus.Computer bus formatscurrently supportedinclude ISA (scannerand multi-slave), PCI,PC/104, PC Card(PCMCIA), and VME.

PLC Network ModulesSST PLCNetwork Modulesallow you toconnect yourotherwiseincompatibleprogrammablecontroller toProfibus.

Network Diagnostic and ConfigurationSoftwareIdentifyproblems andconfigure yourProfibusnetwork usingSST’s ProfibusDP CaptureUtility andProfibus DP Configuration Tool.

Data ServersUse SST’s OPC Server for Profibus to integrateSST’s Profibus Interface Cards with OPCClients. The OPC Server is available in either amaster or multi-slave version.

Network Gateways / Protocol ConvertersSST’s X-Link allows you to create a bridgebetween Profibus and any of the 45 networkscurrently supported.

-12-

I/O Simulation SoftwareSST’s PICS Simulation Software enables you toperform control systems testing and operatortraining. Create a dynamic model on a PC thatduplicates the control software with simulateddevice feedback. By simulating your process,you will save time and money, manage thetechnical andscheduling risksassociated with aproject, minimizeprocessdowntime andgreatly enhanceoperator training.

Embedded Network SolutionsSST’s Universal Communication System (UCS)is an embedded network interface system formanufacturers of industrial automation products.It features a selection of small, inexpensivenetwork modules with a common interface tothe host product. Manufacturers no longerrequire separate programming efforts for eachnetwork protocol they wish to support. Bysimply implementing the UCS client interfaceonce, a manufacturer can plug & play with allindustrial networkssupported by master orslave UCS modules.

SST and ProfibusSST is an active member of ProfibusInternational and holds seats on the MarketingAdvisory and Technical Review Board and is amember of the Board of Directors for ProfibusTrade Organization. SST was the first to passProfibus DP Master Certification Testing with itsProfibus Scanner module for the Allen-BradleySLC 500 and has a certified Profibus NetworkEngineer on staff.

SST Network Tools for Rockwell Automation

Network Interface CardsSST Network Interface Cards allow you toconnect a computer directly to RockwellAutomation Data Highway (DH), Data HighwayPlus (DH+) orReliance AutoMaxDCS/RIO.Computer busformats currentlysupported includeISA, PC/104, andVME.

PLC Network ModulesSST PLC NetworkModules allow youto connect yourRockwellAutomationprogrammablecontroller to anotherwiseincompatibleindustrial networkand I/O devices.

Network Diagnostic and ConfigurationSoftwareIdentifyproblems onyour Allen-Bradley networkusing SST’sDH+ NetworkAnalyzer /Monitor and1771 RIO Logic Analyzer / Monitor.

Data ServersUse SST’s OPC Server for DH+ to integrateSST’s DH+ Interface Cards with OPC Clients.

Network Gateways / Protocol ConvertersSST’s X-Link allows you to create a bridgebetween a Rockwell Automation network andany of the 45 networks currently supported.

-13-

I/O Simulation SoftwareSST’s PICS Simulation Software allows you toperform control systems testing and operatortraining. Create a dynamic model on a PC thatduplicates the control software with simulateddevice feedback. By simulating your process,you will save time and money, manage thetechnical andscheduling risksassociated with aproject, minimizeprocessdowntime andgreatly enhanceoperator training.

Embedded Network SolutionsSST’s Universal Communication System (UCS)is an embedded network interface system formanufacturers of industrial automation products.It features a selection of small, inexpensivenetwork modules with a common interface tothe host product. Manufacturers no longerrequire separate programming efforts for eachnetwork protocol they wish to support. Bysimply implementing the UCS client interface

once, a manufacturercan plug & play withall industrial networkssupported by masteror slave UCSmodules.

SST and Rockwell AutomationSST products are referenced in the RockwellAutomation Encompass program.

Embedded Network SolutionsSST’s Universal Communication System (UCS)is an embedded network interface system formanufacturers of industrial automation products.It features a selection of small, inexpensivenetwork modules with a common interface tothe host product. Manufacturers no longerrequire separate programming efforts for eachnetwork protocol they wish to support. Bysimply implementingthe UCS client interfaceonce, a manufacturercan plug & play with allindustrial networkssupported by master orslave UCS modules.

SST and Schneider ElectricSST products are referenced in the SchneiderElectric Alliances program.

SST Network Tools for Schneider Electric

Network Interface CardsSST Network Interface Cards allow you toconnect a computer directly to SchneiderElectric Modicon RIO. Computer bus formatscurrently supported include ISA and VME.

Network Gateways / Protocol ConvertersSST’s X-Link allows you to create a bridgebetween a Schneider Electric network and anyof the 45 networks currently supported.


-14-

SST Network Tools for Siemens

Network Interface CardsSST Network Interface Cards allow you toconnect a computer directly to Siemens L1 andRemote I/O or Simatic TI Remote I/O.Computer bus formats currently supportedinclude ISA.

PLC Network ModulesSST PLC Network Modules provideconnectivity between a DeviceNet network andSiemens ET200S expansion modules.

Network Gateways / Protocol ConvertersSST’s X-Link allows you to create a bridgebetween a Siemens network and any of the 45networks currently supported.

-15-

I/O Simulation SoftwareSST’s PICS Simulation Software allows you toperform control systems testing and operatortraining. Create a dynamic model on a PC thatduplicates the control software with simulateddevice feedback. By simulating your process,you will save time and money, manage thetechnical and scheduling risks associated with aproject, minimize process downtime and greatlyenhance operator training.

TradeOrganizationsand Programs

SST has forged strategic alliances withnumerous organizations in the industrial

controls market.

-17-

CommunicationPartners

For SST Network Interface Cardsand PLC Network Modules

SST and our Communication Partnersare working together to provide

network connectivity for yourindustrial applications!

- PC Control- Operator Interface

- HMI- SCADA

- Data Acquisition- PLC Programming

-19-

SST Products forIntellution

FIX Dynamics Family of Products

FIX Dynamics is a family of HMI / AutomationSoftware built on open standards such as ActiveX,Visual Basic for Applications, and OPC technology.

FIX Drivers are available from SST for the followingSST Interface Cards:

- ControlNet (via OPC) - ISA, PC/104- DeviceNet (via OPC) - ISA, ISA Pro, ISA Pro two

channel, PC/104, PC/104 Pro, PC Card(PCMCIA), PCI Pro, Compact PCI Pro

- Profibus (via OPC) - ISA Multi-slave- Rockwell Automation Allen-Bradley DH/DH+

(via OPC) - ISA, PC/104

Paradym-31

Paradym-31 is a PC-based (SoftLogic) control packagethat allows you both hard real-time and Windowsnative NT automation solutions.

Drivers are available for the following SST interfacecards:

- DeviceNet - ISA, ISA Pro, ISA Pro two channel, PC/104, PC/104 Pro, PC Card (PCMCIA), PCI Pro, Compact PCI Pro

- Profibus - ISA, PCI, PC/104

SST Products forSteeplechase

Visual Logic Controller (VLC)

Steeplechase combines deterministic performance, afully integrated HMI package, and a rich set of dataconnectivity tools to create a PC-based control solutionfor a wide variety of applications.

SST interface cards connect VLC to:- DeviceNet - ISA, ISA Pro, ISA Pro two channel,

PC/104, PC/104 Pro- Profibus - ISA, PC/104- Schneider Electric Modicon 800 Series I/O - ISA

-22-

SST Products forWonderware

InTouch

InTouch is an object-oriented, graphical SCADA/HMIsoftware component from Wonderware’s FactorySuitefor industrial automation, process control andsupervisory monitoring applications.

SST interface cards use FactorySuite I/O servers toconnect InTouch to:

- Profibus - ISA, PCI, PC/104- Rockwell Automation Allen-Bradley DH+ - ISA,

PC/104

SST interface cards and OPC Servers use theFactorySuite OPCLink (OPC) Client to connectInTouch to:

- ControlNet - ISA, PC/104- DeviceNet - ISA, ISA Pro, ISA Pro two channel,

PC/104, PC/104 Pro, PC Card (PCMCIA), PCI Pro, Compact PCI Pro

- Profibus - ISA Multi-slave- Rockwell Automation Allen-Bradley DH/DH+ -

ISA, PC/104

InControl

InControl is an open architecture SoftLogic controlsystem that allows you to design, create, test, and runapplication programs for controlling your process.

SST interface cards connect InControl to:- DeviceNet - ISA, ISA Pro, PC/104, PC/104 Pro,

PC Card (PCMCIA), PCI Pro, Compact PCI Pro- Profibus - ISA, PCI, PC/104

-23-

NetworkInterface Cards

SST Network Interface Cards connectyour computer directly to industrial

networks including CANopen, ControlNet,DeviceNet, Interbus and Profibus as well as

networks from Rockwell Automation(Allen-Bradley, Reliance), Schneider Electric

(Modicon) and Siemens.

Computer architectures supported include: - ISA

- PCI - Compact PCI

- PC Card (PCMCIA) - PC/104

- VME

Applications Include:- PC Control

- I/O Emulation- OI / HMI / SCADA

- Data Acquisition- PLC Programming

- Network Configuration / Diagnostics / Troubleshooting

-25-

NetworkInterface Cardsfor...

CANopen

-27-

Network Interface Cards for CANopen

Connect your computer to CANopen with SSTInterface Cards.

Applications include:- PC Control- OI/HMI/SCADA- Network Configuration, Troubleshooting,

and Diagnostics

Features- Configuration Manager

- Non-volatile concise data storage- Automatic node detection /

configuration on power up/reset- NMT master functionality- Synch manager- Local object dictionary (non-volatile)- Supports network variable data type

mapping as described in DS405- Supports some basic generic I/O data type

mappings as described in DS401- Supports all standard baud rates (10K, 20K,

50K, 125K, 250K, 500K, 800K, and 1M)- Supports local access to object dictionary

via shared memory SDO requests- Supports the predefined master/slave

connection set- Supports configurable PDO mappings- Supports up to 64 TX and 64 RX PDOs- Supports up to 127 Devices

AffiliationsSST is a member of CAN in Automation (CiA).

Available for SST CANopen Interface Cards*:

Microsoft Windows 95/98/NT driversOPC Server**

24/7 global technical support

* Varies by bus format, contact SST for complete details** Call for availability

-28-

CANopen ISA Card

The SST CANopen ISA interface card* connects yourISA bus computer to CANopen.

Specifications:- 16-bit, half-length interface card, surface-mount

technology ISA interface card- Compatible with ISA (PC/AT) bus- 256 Kbytes shared RAM (16 Kbytes host interface

window)- High performance 40 Mhz processor with 512

Kbytes RAM, 512 Kbytes Flash- Software configurable interrupts, 2/9, 5, 7, 10, 11,

12, and 15 supported- 5-pin connector- Network status bicolor indicator- Supports connection to non-powered (3 wire)

CAN network with external 12-24 VDC supply- Compatible with CAN specfication 2.0 part A- Supports CAN data rates up to 1 Mbaud- Multiple cards can be configured in the same

computer- 500 V optically isolated CAN interface- Power requirements: +5 V +/- 5% 325 mA

(typical)- Operational temperature: 0 to 50C (32 to122oF)- Storage temperature: -25 to 70C (-13 to 158oF)

Part Number: SST-COP-ISA

* Call for availability

CANopen PCI Card

The SST CANopen PCI interface card* connects yourPCI bus computer to CANopen.


technology PCI interface card- PCI Specification 2.1 Compliant- 256 Kbytes shared RAM (16 Kbytes host interface


Kbytes RAM, 512 Kbytes Flash- Standard PCI interrupts supported- 5-pin connector- Network status bicolor indicator- Plug and play drivers included- Supports connection to non-powered (3 wire)




Part Number: SST-COP-PCI


-29-

CANopen PC/104 Card

The SST CANopen PC/104 interface card* connectsyour PC/104 bus computer to CANopen.

Specifications:- Compatible with PC/104 bus- 256 Kbytes shared RAM interface memory (16

Kbytes host interface window)- High performance 40 Mhz processor with 512

Kbytes RAM, 512 Kbytes Flash- Software configurable interrupts, 2/9, 5, 7, 10, 11,

12, and 15 supported- 5-pin connector- Network status bicolor indicator- Supports connection to non-powered (3 wire)




Part Number: SST-COP-104


-30-


ControlNet

-31-

Connect your computer to ControlNet with SSTNetwork Interface Cards.

Applications include:- PC Control- OI/HMI/SCADA- Network Configuration, Troubleshooting, and Diagnostics

- PLC programming

FeaturesHigh performance ControlNet Interface Card:

- 32-bit i960 RISC CPU- Simultaneous operation of 128 scheduled

and 128 unscheduled message screeners- Simultaneous functionality of ControlNet

messaging, scanner, and adapter

Ease of Use- Designed to work with any existing SST

5136-SD Data Highway Plus software driver for Operator Interface and HMI applications

- Works with Rockwell Software’s RSLinx allowing compatibility with Rockwell’s “RS” family of products

- Integrated configuration tool available for ControlNet scanner applications

Custom Driver DevelopmentSST offers two options forsupporting the ControlNetCard: SST Common DriverArchitecture (CDA) or MemoryMapped Access. The CDAsignificantly reduces software driverdevelopment time without compromising any ofSST’s hardware specific features. The CDAsupports SST’s ControlNet, DeviceNet,Modicon, and Profibus cards. Memory MappedAccess is also available. SST provides an opendocumented memory map interface withexample C source code and Windows 32-bitDLLs and drivers.

AffiliationsSST holds electedpositions onControlNetInternational’sBoard ofDirectors and Technical Review Board.

The SST ControlNet VMEinterface card is referenced inthe Rockwell AutomationEncompass programs.

CertificationsSST ControlNet interfacecards are conformancetested.

Other SST ControlNet Products- Network Diagnostic and Configuration

Software- Data Servers- Network Gateways / Protocol Converters- Embedded Network Solutions

Network Interface Cards for ControlNet

Available for SST ControlNet Interface Cards*:

10 Year WarrantyControlNet Configuration Tool

OPC ServerControlNet Network Analyzer

Rockwell Software RSLinx supportMicrosoft Windows NT drivers / DLLs

Example code and open memory map interface forcustom driver development24/7 global technical support

* Varies by bus format, contact SST for complete details

-32-

The SST ControlNet PCI card connects your PCI buscomputer to ControlNet.


technology PCI interface card- PCI specification 2.1 compliant- Intel i960 32-bit RISC 33 Mhz processor- 1 Mbyte local 32-bit RAM- 1 Mbyte of shared 32-bit RAM- 1 Mbyte of Flash memory- Standard ControlNet LEDs for each channel- LAN Controller (no ControlNet ASICs used) is

implemented in a field programmable gate array (FPGA)- FPGA executes all protocol activity, including

scanning I/O without intervention from i960 processor

- FPGA is software field upgradeable- Network Interface- 2 BNC connectors- ControlNet redundancy implemented in

hardware on interface card- Isolated Network Access Port (NAP)- 5136-SD DH+ Emulation- Supports standard PCCC messaging on

ControlNet- Applications using interrupts may require minor

changes- ControlNet Conformance Tested- Power requirements: 750 mA @ 5 V- Operational temperature: 0 to 50C (32 to 122oF)- Storage temperature: -25 to 70C (-13 to 158oF)

Part Number: 5136-CN-PCI

ControlNet PCI Card

The SST ControlNet ISA card connects your ISA buscomputer to ControlNet.

Specifications:- 16-bit, half-length ISA interface card- Intel i960 32-bit RISC 30 Mhz processor- 1 Mbyte local 32-bit RAM- 512 Kbytes of shared 16-bit RAM- 512 Kbytes of 16-bit Flash memory- Standard ControlNet LEDs for each channel- LAN Controller (no ControlNet ASICs used) is


scanning I/O, without intervention from i960 processor

- FPGA is software field upgradeable- Network Interface

- 2 BNC connectors- ControlNet redundancy implemented in

hardware on interface card- Isolated Network Access Port (NAP)

- 5136-SD DH+ Emulation- Supports standard PCCC messaging - Applications using interrupts may require minor

changes- ControlNet Conformance Tested- Power requirements: 650 mA @ 5 V- Operational temperature: 0 to 50C (32 to122oF)- Storage temperature: -25 to 70C (-13 to 158oF)

Part Number: 5136-CN-ISA

ControlNet ISA Card

-33-

ControlNet PC/104 Card

The SST ControlNet PC/104 card connects yourPC/104 bus computer to ControlNet.

Specifications:- Compatible with PC/104 bus- Intel i960 32-bit RISC 30 Mhz processor- 1 Mbyte local 32-bit RAM- 512 Kbytes of shared 16-bit RAM- 2 Mbytes of 16-bit Flash memory- Standard ControlNet LEDs for each channel- LAN Controller (no ControlNet ASICs used) is





hardware on interface card- 5136-SD DH+ Emulation

- Supports standard PCCC messaging on ControlNet

- Applications using interrupts may require minor changes

- ControlNet Conformance Tested- Power requirements: 400 mA @ 5 V- Operational temperature: 0 to 60C (32 to 140oF)- Storage temperature: -25 to 70C (-13 to 158oF)

Part Number: 5136-CN-104

ControlNet VME Card

The SST ControlNet VME card connects your VMEbus computer to ControlNet.

Specifications:- Intel i960 32-bit RISC 30 Mhz processor- 1 Mbyte local 32-bit RAM- 512 Kbytes of shared 16-bit RAM- 512 Kbytes of 16-bit Flash memory- Serial configuration port- LAN Controller (no ControlNet ASICs used) is





hardware on interface card- Standard ControlNet LEDs for each channel

- 5136-SD-VME DH+ Emulation- Supports standard PCCC messaging on

ControlNet- ControlNet Conformance Tested- Power requirements: 400 mA @ 5 V- Operational temperature: 0 to 50C (32 to 122oF)- Storage temperature: -25 to 70C (-13 to 158oF)

VME Specification:- Size: double height (6U), single width card using

P1 connector compatible with ANSI/IEEE 1014- Capabilities:

- Memory: SD16, SD08 (E0), SA24- Byte ordering is software selectable

- Registers: SD08(0), SA16- Addresssing:

- Standard: 16 Kbytes on any 16 Kbyte boundary, or 512 Kbytes on any 512 Kbyte boundary

- Short: 32 bytes on any 32 byte boundary- Interrupts:

- Software selected 1-7, or none- Software set 8 bit status / ID register- Release on acknowledge (ROAK)

Part Number: 5136-CN-VME

-34-


DeviceNet

-35-

Connect your computer to DeviceNetwith SST Interface Cards.

Applications include:- PC Control- OI/HMI- Network Configuration,

Troubleshooting, and Diagnostics

All SST DeviceNet Interface Cards feature:- Entire DeviceNet Protocol is executed in

hardware- All DeviceNet standard baud rates

supported: 125, 250, and 500 Kbaud- UCMM capable, Group 1, 2, and 3 dynamic

explicit connections supported- Simultaneous execution of Group 2 Client

(master) and Server (slave) operation- Full DeviceNet implementation including

Change of State (COS) and explicit messaging

- DeviceNet compliance is ensured at the card level for I/O scanner and device applications

Custom Driver DevelopmentSST offers two options for supporting theDeviceNet Card: SST Common DriverArchitecture (CDA) or Memory Mapped Access.The SST CDA significantly reduces softwaredriver development time without compromisingany of SST’s hardware specific features. TheCDA supports SST’s ControlNet, DeviceNet,Modicon, and Profibus interface cards. MemoryMapped Access is also available. SST providesan open documented memory map interfacewith example C source code and Windows 32-bit DLLs and drivers.

SST DeviceNet cards are available in standardand pro formats. The Pro version is ideal for PCscanner applications when fast scan times andhigh performance are required.

AffiliationsSST holds electedpositions as ChiefTechnical Officer and onthe Technical ReviewBoard of the Open DeviceNet VendorAssoication (ODVA)

The DeviceNet VME interfacecard is referenced in theRockwell AutomationEncompass Programs.

CertificationsSST DeviceNet Interface Cards are conformancetested.

Other SST DeviceNet Products- PLC Network Modules- Network Diagnostic and Configuration

Software- Data Servers- Network Gateways / Protocol Converters- Embedded Network Solutions

Network Interface Cards for DeviceNet

Available for SST DeviceNet Interface Cards*:

10 Year WarrantyDeviceNet Node Commissioning Tool

DeviceNet Network Analyzer and MonitorDiagnostic Software Tools

OPC ServerMicrosoft Windows 95/98/NT drivers/DLLs

Custom driver development software24/7 global technical support

* Varies by bus format. Contact SST for complete details.

-36-

The SST DeviceNet ISA card connects your ISA buscomputer to DeviceNet.

Specifications:- 8-bit, quarter-length interface card- Compatible with ISA (PC/AT) bus- 16 Mhz V40 microprocessor with 128 Kbytes of

RAM- 16 Kbytes host interface memory- Software configurable base address- Software configurable interrupts, 2, 5, and 7

supported- DeviceNet compatible 5-pin DeviceNet connector- DeviceNet compatible network status bicolor

indicator- Supports connection to non-powered (3 wire)

CAN network with external 12-24 VDC supply- Compatible with CAN specification 2.0 part A- Supports CAN data rates up to 1 Mbaud- Supports all standard DeviceNet data rates: 125,

250, and 500 Kbaud- Multiple cards can be configured in the same

computer- 500 V optically isolated CAN interface- DeviceNet conformance tested- Operational temperature: 0 to 50C (32 to 122oF)- Storage temperature: -25 to 70C (-13 to 158oF)- Power requirements: +5 V +/- 5% 200 mA

(typical)

Part Number: 5136-DN-ISA

The SST DeviceNet Pro ISA card connects your ISAbus computer to DeviceNet. The Pro Card is a high-performance version of the SST DeviceNet ISA cardand is compatible with all applications written for theSST DeviceNet ISA card.


technology ISA interface card- Compatible with ISA (PC/AT) bus- 256 Kbytes shared RAM (16 Kbytes host interface


Kbytes RAM, 512 Kbytes Flash- Software configurable interrupts 2/9, 5, 7, 10, 11,

12, and 15 supported- DeviceNet compatible 5-pin DeviceNet connector- DeviceNet compatible network status bicolor


CANnetwork with external 12-24 VDC supply

- Compatible with CAN specification 2.0 part A- Supports CAN data rates up to 1 Mbaud- Supports all standard DeviceNet data rates: 125,



(typical)

Part Number: 5136-DNP-ISA

DeviceNet Pro ISA CardDeviceNet ISA Card

-37-

DeviceNet Pro PCI Card

The SST DeviceNet Pro two channel ISA cardconnects your ISA bus computer to DeviceNet. ThePro Card is a high-performance version of the SSTDeviceNet ISA card and is compatible with allapplications written for the SST DeviceNet ISA card.

Features:- Contains two completely independent DeviceNet

channels

Specifications:- 16-bit, half-length interface card, surface mount

technology ISA interface card- Compatible with ISA (PC/AT) bus- DeviceNet conformance tested- Operational temperature: 0 to 50C (32 to 122oF)- Storage temperature: -25 to 70C (-13 to 158oF)- Power requirements: +5 V +/- 5% 650 mA

(typical)

Each Channel Includes:- High performance 40 Mhz processor with 512

Kbytes RAM, 512 Kbytes Flash- Software configurable interrupts 2/9, 5, 7, 10, 11,

12, and 15 supported- DeviceNet compatible sealed micro connector- DeviceNet compatible network status bicolor




computer- 500 V optically isolated CAN interface

Part Number: 5136-DNP-ISA-2

The SST DeviceNet Pro PCI card connects your PCIbus computer to DeviceNet. The Pro Card is a high-performance version of the SST DeviceNet ISAcard and is compatible with all applications written forthe SST DeviceNet ISA card.

Specifications:- 32-bit, half-length interface card, surface mount

technology PCI interface card- PCI Specification 2.1 Compliant- 256 Kbytes shared RAM (16 Kbytes host interface


Kbytes RAM, 512 Kbytes Flash- Standard PCI interrupts supported- DeviceNet compatible 5-pin DeviceNet connector- DeviceNet compatible network status bicolor

indicator- Plug and play drivers included- Supports connection to non-powered (3 wire)

CAN networks with external 12-24 VDC supply- Compatible with CAN specification 2.0 part A- Supports CAN data rates up to 1 Mbaud- Supports all standard DeviceNet data rates: 125,



(typical)

Part Number: 5136-DNP-PCI

DeviceNet Pro ISA Two Channel Card

-38-

DeviceNet Pro PC/104 Card

The SST DeviceNet PC/104 card connects yourPC/104 bus computer to DeviceNet.

Specifications:- Compatible with PC/104 bus- 16 Mhz V40 microprocessor with 128 Kbytes of

RAM- 16 Kbytes host interface memory- Software configurable base address- Software configurable interrupts, 2, 5, and 7






(typical)

Part Number: 5136-DN-104

The SST DeviceNet Pro PC/104 card connects yourPC/104 bus computer to DeviceNet. The Pro card is ahigh-performance version of the SST DeviceNetPC/104 card and is compatible with all applicationswritten for the SST DeviceNet PC/104 card.

Specifications:- Compatible with PC/104 bus- 256 Kbytes shared host interface memory (16

Kbytes host interface window)- High performance 40 Mhz processor with 512

Kbytes RAM, 512 Kbytes Flash - Software configurable interrupts, 2/9, 5, 7, 10, 11,

12 and 15 supported- DeviceNet compatible 5-pin DeviceNet connector- DeviceNet compatible network status bicolor


CAN network with external 12-24 VDC supply- Compatible with CAN specification 2.0 part A- Supports all standard DeviceNet data rates: 125,


computer- Supports CAN data rates up to 1 Mbaud - 500 V optically isolated CAN interface- DeviceNet conformance tested- Operational temperature: 0 to 60C (32 to 140oF)- Storage temperature: -25 to 70C (-13 to 158oF)- Power requirements: +5 V +/- 5% 325 mA

(typical)

Part Number: 5136-DNP-104

DeviceNet PC/104 Card

-39-

The SST DeviceNet PC Card (PCMCIA) connectsyour PC Card (PCMCIA) bus computer to DeviceNet.

Specifications:- Compatible with PC Card, release 2.1, type II card- 16 Mhz V40 microprocessor with 128 Kbytes of

RAM- 16 Kbytes host interface memory- Software configurable base address- Software configurable interrupts 2, 5, and 7


indicator- Plug and play (Windows 95 and 98)- Supports connection to non-powered (3 wire)




(typical)

Part Number: 5136-DN-PCM

DeviceNet PC Card (PCMCIA)

The SST DeviceNet Pro PC Card (PCMCIA) connectsyour PC Card bus computer to DeviceNet. The Procard is a high-performance version of the SSTDeviceNet PC Card and is compatible with allapplications written for the SST DeviceNet PC Card.

Specifications:- Compliant with PC Card specification 2.1- Type II PC Card form factor- High performance 40 Mhz processor with 512

Kbytes RAM and 512 Kbytes Flash- 256 Kbytes shared RAM (16 Kbytes host interface

windows)- Interrupts none, 5, 7, and 12 supported- DeviceNet compatible 5-pin or sealed

micro connector version available- DeviceNet compatible network status bicolor

indicator- Plug and play (Windows 95 and 98)- Supports connection to non-powered (3 wire)

CAN networks with external 12-24 VDC supply- Compatible with CAN specification 2.0 part A- Supports CAN data rates up to 1 Mbaud- Supports all standard DeviceNet data rates: 125,



(typical)

Part Number:- 5136-DNP-PCM-ST uses DeviceNet compatible 5-pin

connector- 5136-DNP-PCM-SM uses sealed micro connector

DeviceNet Pro PC Card(PCMCIA)

-40-

The SST DeviceNet Pro Compact PCI interface cardconnects your Compact PCI bus computer toDeviceNet.

Specifications:- 32-bit, 3U Compact PCI interface card- 256 Kbytes shared RAM (16 Kbytes host interface


Kbytes RAM, 512 Kbytes Flash - PCI BIOS configurable interrupt support- DeviceNet compatible 5-pin DeviceNet connector- DeviceNet compatible network status bicolor

indicator- Plug and play drivers included- Supports connection to non-powered (3 wire)




(typical)

Part Number: 5136-DNP-CPCI

DeviceNet Pro Compact PCI Card

DeviceNet VME Card

The SST DeviceNet VME card connects your VMEbus computer, programmable controller or motioncontroller to DeviceNet.

Specifications:- Double-height, single-width card using P1

connection- Compatible with ANSI/IEEE Std. 1014- Responds to Standard Supervisory and

Non-Privileged Address modifier codes- Multiple cards can be configured in the same

computer- Configurable interrupt via DIP switches- DeviceNet compatible 5-pin DeviceNet connector- DeviceNet compatible network status bicolor



250, and 500 Kbaud- 500 V network isolation- Operational temperature: 0 to 50C (32 to 122oF)- Storage temperature: -25 to 70C (-13 to 158oF)- Power requirements: +5 V +/- 5% 500 mA

(typical)

Part Number: 5136-DN-VME

-41-


Interbus

-43-

Connect your computer to Interbus with SSTInterface Cards.

Applications include:- PC Control- OI/HMI- Network Configuration, Troubleshooting,

and Diagnostics

All SST Interbus Interface Cards feature:- Complete support for Interbus Generation 4

protocol- Firmware download through the diagnostic

interface- Parameter settings using the SST Interbus

Configuration Tool**- Non-volatile parameterization storage- User-defined addressing- Support for Interbus PCP 2.x- Drivers for DOS, Windows 95/98 and NT

4.0

AffiliationsSST is a member of theInterbus Club.

Other SST Interbus Products- PLC Network Modules- Network Gateways / Protocol Converters- Embedded Network Solutions

Available for SST Interbus Interface Cards*:

SST Interbus Configuration Tool**24/7 global technical support

* Varies by bus format. Contact SST for complete details.** Call for availability

Network Interface Cards for Interbus

-44-

The SST Interbus interface card* allows your ISA buscomputer to be an Interbus master.

Specifications:- Compatible with ISA bus- Complete Interbus Master functionality- Board address is set with DIP switches- RS-232 interface for firmware upgrades- Interbus interface is a DIL male connector- Supports software-configurable interrupts 3, 5, 7,

9(2), 10, 11, 12, 15- 4 Kbytes addressable memory- Operating temperature: 0 to 70C (32 to 158oF)- Storage temperature: -25 to 75C (-13 to 167oF)- Power requirements: +5 V +/- 5%- Power consumption: approximately 2 W

Part Number: SST-IBS-ISA-M


Interbus ISA Master Card Interbus ISA Slave Card

The SST Interbus interface card* allows your ISA buscomputer to be a remote device on Interbus.

Specifications:- Compatible with 8-bit and 16-bit ISA buses- Complete Interbus remote interface functionality- Board address is set with DIP switches- Interbus standard Remote In and Remote Out

interfaces- Serial interface for firmware upgrades- Variable Interbus slave register of 0 to 16 words- Integrated Watchdog circuit- Up to 4 cards per PC bus- Supports software-configurable interrupts 3, 5, 7,

9(2), 10, 11, 12, 15- Operating temperature: 0 to 70C (32 to 158oF)- Storage temperature: -25 to 75C (-13 to 167oF)- Power requirements: +5 V +/- 5%- Power consumption: 2.5 W (typical)

Part Number: SST-IBS-ISA-S


-45-

Interbus PC/104 Card Interbus VMEMaster/Slave Card

The SST Interbus interface card* connects yourPC/104 bus computer to Interbus.

Specifications:- Compatible with PC/104 bus- Capable of both Interbus Master and Slave

functionality- Board address is set with DIP switches- RS-232 interface for firmware upgrades- Interbus interface is a DIL male connector- Supports software-configurable interrupts 3, 5, 7,

9(2), 10, 11, 12, 15- 4 Kbytes addressable memory- Operating temperature: 0 to 70C (32 to 158oF)- Storage temperature: -25 to 75C (-13 to 167oF)- Power requirements: +5 V +/- 5%- Power consumption: approximately 2 W

Part Number: SST-IBS-104


The SST Interbus interface card* allows your VMEbus computer to be either an Interbus master orremote device.

Specifications:- VME 6U, P1 compatible- 9-pin D-SUB Interbus network connectors for

Interbus Interface, Remote Input, and RemoteOutput

- Complete Interbus Master and Slave functionality- Connect to up to 512 Interbus devices- Interbus Loop support- Supports up to 62 PCP devices- Logical addressing- Supports Group Shutdown- Board address is set with DIP switches- 9-pin D-SUB RS-232 interface for firmware

upgrades- Integrated Watchdog circuit- 256 Kbytes shared RAM- Operating voltage: +5 V- Power consumption: 3.1 W (5 V typical), 2.4 (24 V

typical)- Operating temperature: 0 to 55C (32 to 131oF)- Storage temperature: -25 to 85C (-13 to 185oF)

Part Number: SST-IBS-VME


-46-

Interbus VME Master Card

The SST Interbus interface card* allows your VMEbus computer to be an Interbus master.

Specifications:- VME 6U, P1 compatible- 9-pin D-SUB Interbus network connector- Complete Interbus Master functionality- Connect to up to 512 Interbus devices- Interbus Loop support- Supports up to 62 PCP devices- Logical addressing- Supports Group Shutdown- Board address is set with DIP switches- RS-232 interface for firmware upgrades- Integrated Watchdog circuit- Supports software-configurable interrupts 3, 5, 7,

9(2), 10, 11, 12, 15- 256 Kbytes shared RAM- Operating voltage: +5 V- Power consumption: 3.1 W (typical)- Operating temperature: 0 to 55C (32 to 131 oF)- Storage temperature: -25 to 85C (-13 to 185oF)

Part Number: SST-IBS-VME-M


-47-


Profibus

-49-

Connect your computer to Profibus DP, FMSclient**, FDL or the S7 Communication Portwith SST Network Interface Cards.

Applications include:- PC Control- OI/HMI- SCADA- Network Configuration, Troubleshooting & Diagnostics

- I/O Emulation

SST Profibus Interface Card features:- Simultaneous operation of DP, FDL (layer 2)

FMS client** and S7 Communication Port protocols

- Supports all standard Profibus baud rates: 9.6 Kbaud to 12 Mbaud

- Extremely fast scan rate for DP Master - 6000 I/O in 1ms!

- Auto baud rate detection- Intel 32-bit i960 RISC processor utilized

with 512 Kbytes of 32-bit local RAM- 512 Kbytes of flash memory for storage of

programs and configuration- 9-pin ‘D’ shell connector or Phoenix

connector with optional built-in termination

Custom Driver DevelopmentSST offers two options for supporting theProfibus Card: SST Common DriverArchitecture (CDA) or Memory Mapped Access.The SST CDA significantly reduces softwaredriver development time without compromisingany of SST’s hardware specific features. TheCDA supports SST’s ControlNet, DeviceNet,Modicon, and Profibus cards. SST provides anopen documented memory map interface withexample C source code and Windows 32-bitDLLs and drivers.

AffiliationsSST is a member ofProfibus Internationaland sits on the Board ofDirectors as well asparticipating on theMarketing council,which promotes the Profibus protocol.

SST has a certified Profibus Network Engineeron staff.

Other SST Profibus Products- PLC Network Modules- Network Diagnostic and Configuration

Software- Data Servers- Network Gateways / Protocol Converters- I/O Simulation Software- Embedded Network Solutions

Network Interface Cards for Profibus

Available for SST Profibus Interface Cards*:

10 Year WarrantyDDE Server / OPC Server

Profibus DP Configuration ToolProfibus DP Capture Software

Custom driver development softwareSample code and Windows 32-bit kernel driversfor complete device driver development for DPmaster, DP slave, FDL, and FMS** applications


* Varies by bus format, contact SST for complete details.** Supports FMS client services only, on a DEFINED,MASTER to MASTER ACYCLIC (MMAC) connectiontype

-50-

The SST Profibus ISA card connects your ISA buscomputer to Profibus DP, FMS client*, FDL and theS7 Communication Port.

Specifications:- 1/2 length 16-bit ISA interface card- 24 Mhz Intel i960 RISC processor with 512

Kbytes of 32-bit local RAM- 256 Kbytes shared 16-bit RAM, accessible from

the host in 16 Kbyte pages- 512 Kbytes sectored flash memory for storage of

card firmware and configuration- Store network parameters, DP master and DP

slave configurations in Flash- Siemens ASPC2 LAN controller for Profibus

functions- Occupies 16 Kbytes of host memory, 8 I/O port

addresses- Supports interrupts 3, 5, 7, 9, 10, 11, 12, 15- Supports baud rates from 9.6 Kbaud to 12 Mbaud- Auto baud rate detection- Standard Profibus 9-pin D-connector- Hardware watchdog- Diagnostic LEDgives instantaneous status of

network error, DP master, DP slave, FMS client* and FDL

- Operating temperature: 0 to 50C (32 to 122oF)- Storage temperature: -25 to 70C (-13 to 158oF)- Power requirements: maximum 750 mA at 5 V

Part Number: 5136-PFB-ISA

* supports FMS client services only, on a DEFINED,MASTER to MASTER ACYCLIC (MMAC)connection type

The SST Profibus ISA Multi-Slave card allows 1 to 125possible DP slave stations to be emulated or monitoredon one physical Profibus connection.

Features:- Monitor up to 125 connected DP slaves

- view input/output and slave diagnostic / parameterization data for each slave

- connects as a passive station- Emulate up to 125 DP slaves

- send the input data, receive output data- change and update the diagnostic data- used with SST PICS Simulation

- SST recommended solution for connecting OI/HMI software to Profibus- does not affect existing network traffic (active

stations affect DP Master Class 1 I/O scan times)- avoids 244 bytes in / 244 bytes out limitation- several DP Class 1 masters can communicate to

one multi-slave card- Minimal setup and configuration required- Ideal for full load network testing of DP Masters

Specifications:- 1/2 length 16-bit ISA interface card- 512 Kbytes shared 16-bit RAM, accessible from

the host in 16 Kbyte pages- 512 Kbytes sectored flash memory for storage of

card firmware and configuration- Store network parameters and DP slave

configuration in Flash- Occupies 16 Kbytes of host memory, 8 I/O port

addresses- Supports interrupts 3, 5, 7, 9, 10, 11, 12, 15- Supports baud rates from 9.6 Kbaud to 12 Mbaud- Standard Profibus 9-pin D-connector- 5-pin Phoenix connector (no bus connector

required)- Built-in termination can be added by making

connections on the Phoenix connector- Diagnostic LED gives instantaneous status of

network error, DP master, DP slave, FMS client* and FDL

- Operating temperature: 0 to 50C (32 to 122oF) - Storage temperature: -25 to 70C (-13 to 158oF)- Power requirements: maximum 450 mA at 5 V

Part Number: 5136-PBMS-ISA

Profibus ISA Card Profibus ISA Multi-SlaveCard

-51-

Profibus PCI Card

The SST Profibus PC/104 card connects your PC/104bus computer to Profibus DP, FMS client*, FDL andthe S7 Communication Port.

Specifications:- 16-bit PC/104 stackable card- 24 Mhz Intel i960 RISC processor with 1 Mbyte of

32-bit local RAM- 512 Kbytes shared 16-bit RAM, accessible from the

host in 16 Kbyte pages- 512 Kbytes sectored Flash memory for storage of

card firmware and configurations- Store network parameters, DP master and DP slave

configuration in Flash- Siemens ASPC2 LAN controller for Profibus


addresses- Supports interrupts 3, 5, 7, 9, 10, 11, 12, 15- Supports baud rates from 9.6 Kbaud to 12 Mbaud- Auto baud detection- Standard Profibus 9-pin D-connector- Hardware watchdog- Diagnostic LED gives instantaneous status of network

error, DP master, DP slave, FMS client* and FDL- Operating temperature: 0 to 50C (32 to 122 oF)- Storage temperature: -25 to 70C (-13 to 158oF) - Power requirements: maximum 750 mA at 5 V

Part Number: 5136-PFB-104


The SST Profibus PCI card connects your PCI buscomputer to Profibus DP, FMS client*, FDL and theS7 Communication Port.

Specifications:- 1/2 length 32-bit PCI interface card- 33 Mhz Intel i960 RISC processor with 4 Mbytes of

32-bit local RAM- 2 Mbytes shared 32-bit RAM- 512 Kbytes sectored flash memory for storage of

card firmware and configuration- Store network parameters, DP master and DP slave

configurations in Flash- Siemens ASPC2 LAN controller for Profibus

functions- Occupies 2 Mbytes of host memory- Supports standard PCI interrupts- Supports baud rates from 9.6 Kbaud to 12 Mbaud- Auto baud detect- Standard Profibus 9-pin D-connector - 5-pin Phoenix connector (no bus connector required)- Built-in termination can be added by making

connections on the Phoenix connector- Hardware watchdog- Diagnostic LED gives instantaneous status of network

error, DP master, DP slave, FMS client* and FDL- Operating temperature: 0 to 50C (32 to 122oF)- Storage temperature: -25 to 70C (-13 to 158oF) - Power requirements: maximum 750 mA at 5 V

Part Number: 5136-PFB-PCI


Profibus PC/104 Card

-52-

Profibus PC Card (PCMCIA)

The SST Profibus PC Card (PCMCIA) connects yourPC Card bus computer to Profibus DP, FMS client*,FDL and the S7 Communication Port.

Specifications:- Compatible with PC Card, release 2.1, type II card- 24 Mhz Intel i960 RISC processor with 512 Kbytes

of 32-bit local RAM- 256 Kbytes shared 16-bit RAM, accessible from the

host in 16 Kbyte pages- 512 Kbytes sectored flash memory for storage of

card firmware and configuration- Store network parameters, DP master and DP slave

configurations in flash- Siemens ASPC2 LAN controller for Profibus


addresses- Supports baud rates from 9.6 Kbaud to 12 Mbaud- Auto baud detect- Standard Profibus 9-pin D-connector- Hardware watchdog- Diagnostic LEDs give instantaneous status of network

error, DP master, DP slave, FMS client*, and FDL- Operating temperature: 0 to 50C (32 to 122oF)- Storage temperature: -25 to 70C (-13 to 158oF) - Power requirements: maximum 750 mA at 5 V

Part Number: 5136-PFB-PCM


Profibus VME Card

The SST Profibus VME card connects your VME buscomputer, motion controller or programmablecontroller to Profibus DP, FMS client* and FDL.

Specifications:- 24 Mhz Intel i960 RISC processor with 512 Kbytes

of 32-bit local RAM- 256 Kbytes shared 16-bit RAM, accessible from the

host as 256 Kbytes or in 16 Kbyte pages- 512 Kbytes sectored Flash memory for storage of

card firmware and configuration data- run programs in flash- store network parameters, DP master, DP slave,

FMS client* configurations in Flash- Siemens ASPC2 LAN controller for Profibus

functions- Standard Profibus 9-pin D-connector - 5-pin Phoenix connector (no bus connector required)

- built-in termination can be added by making connections on the Phoenix connector

- internally connected to 9-pin connector- Serial port for downloading software modules and

configuration data- don’t need to download from the host computer- program modules and configurations into Flash

from the serial port- Supports Profibus baud rates from 9.6 Kbaud to 12

Mbaud- Hardware watchdog- Optional host watchdog to shut down operation if

host application fails- Diagnostic LED gives instantaneous status of

network errors, DP master, DP slave, FMS client* and FDL

- Operating temperature: 0 to 50C (32 to 122oF)- Storage temperature: -25 to 70C (-13 to 158oF) - Power requirements: maximum 950 mA at 5 V

Part Number: 5136-PFB-VME


-53-

Config. 2 - 2000 I/O(scan rate ms)

14.387


Using SST Profibus DP Masters

Overview

Benchmarking Results

Scan Time Measurements:

Test Setup:

The following technical note reflects the extremely fast I/O scan rates you can achieve using a high performanceSST Profibus DP Master on Profibus at 12 Mbaud. Three different I/O configurations were used for measuring thescan times: 600, 2000, and 6000 discrete I/O points. The resulting I/O scan times are listed in the chart below.

All scan times were measured using the SST Profibusnetwork capture software. Network messages were

captured to disk with a time stamp.

Station10

Station11

Station12

Station20

Station30

Station31

Station40 Total I/O

Config. 1

24 DI8 DO 32 DO 32 DI

24 DI8 DO 32 DO 32 DI

24 DI8 DO

Baud Rate(baud)

Distance(meters)

12M

6M

3M

1.5M

500K

187.5K

100

100

100

200

400

1000

0.377

0.593

1.043

1.897

5.456

0.573

0.947

1.729

3.303

9.681

25.641

1.034

1.904

3.647

7.045

20.942

55.680

32 DO 32 DI 8 bytes in8 bytes out8 bytes in8 bytes out

8 bytes in8 bytes out


312 DI (~19 AI)296 DO (~18 AO)

1080 DI (~67 AI)1064 DO (~66 AO)

3128 DI (~195 AI)3112 DO (~194AO)








32 bytes in32 bytes outConfig. 2

Config. 3

DI=Discrete Input DO=Discrete Output AI=Analog Input AO=Analog Output

Block I/OStation 10

Block I/OStation 11

Block I/OStation 12

5136-PFB-ISADP Passive Slave

Station 20

SST’s 5136-PFB-ISADP MasterStation 0


Station 30


Station 31


Station 40


-54-


Rockwell AutomationNetworks

-55-

Connect your computer to aRockwell AutomationNetwork with SST InterfaceCards.

Applications include:

- OI/HMI- SCADA- Network Troubleshooting/Diagnostics

All SST Allen-Bradley Data Highway Plus(DH/DH+) Interface Cards feature:

- Support for 57.6, 115.2 and 230.4 Kbaud - Simple connection to network using a 6-pin

terminal connection

Affiliations

The DH/DH+PC/104 and VMEinterface cards andReliance AutoMax VME interface card are referenced in the Rockwell AutomationEncompass Programs.

Other SST Products for RockwellAutomation Networks

- PLC Network Modules- Network Diagnostic Software- Data Servers- Network Gateways / Protocol Converters- I/O Simulation Software- Embedded Network Solutions

Network Interface Cards for Rockwell Automation Networks

Available for SST Rockwell Automation Interface Cards*

10 Year WarrantyDH+ Analyzer/Monitor

1771 Remote I/O Logic Analyzer/MonitorOPC Server for DH+

Software support for emulation of Allen-Bradley’s1784-KT interface card

(compatible with Rockwell Software’s RSLinx andits RS family of products)

Dual Application Interface, allowing either two 16-bit or 32-bit Windows programs to simultaneously

access one SST card (one application using KTemulation and one using SD interface)


* Varies by bus format and network supported.Contact SST for details.

-56-

The SST Allen-Bradley ISA interface card connectsyour ISA bus computer to Allen-Bradley’s DH/DH+networks.

Features:- Supports 57.6, 115.2 and 230.4 Kbaud rates on DH+

and 57.6 Kbaud on DH- Software support included for emulation of Allen-

Bradley’s 1784-KT card- Compatible with Rockwell Software’s RSLinx and

its RS family of products- Most third party products include support for the

SST ISA card including Rockwell Software’s RSLinx communication software

- Dual Application Interface (DAI) allows either two 16-bit or 32-bit Windows programs simultaneous access to one SST card.

- Simple connection to network using a 6-pin screw terminal connector

Specifications:- Quarter length ISA interface card- Occupies 16 or 32 Kbytes of host computer

memory address space, memory location and size software configurable

- Port addresses 200 to 6F8 supported on 8 byte boundaries

- Memory addresses 8000 to FC00 supported on 16 or 32 Kbyte boundaries

- Multiple ISA cards can be configured in the same computer

- Optional interrupt generation on network events- Interrupts 2, 3, 4, 5, 6 and 7 supported- Compatible with PLC-2*, PLC-3*, PLC-5,

PLC-5/250 and SLC 5/04- Operational temperature: 0 to 50C (32 to 122oF)- Storage temperature: -25 to 70C (-13 to 158oF)- Power requirement : +5 V @ 500 mA

* Does not support front port current loop connection to PLC-2 or PLC-3 processors

Part Number: 5136-SD-ISA

The SST Allen-Bradley PC/104 card connects yourPC/104 bus computer to Allen-Bradley's DH/DH+networks.

Features:- Same memory interface as the SST ISA Card for

Allen-Bradley so all applications existing for the ISA card can be used with the PC/104 card

- Supports 57.6, 115.2 and 230.4 Kbaud rates on DH+ and 57.6 Kbaud on DH

- Software support included for emulation of Allen-Bradley’s 1784-KT card

- Compatible with Rockwell Software’s RSLinx and its RS family of products

- Most third party products include support for the SST ISA card including Rockwell Software’s RSLinx communication software

- Dual Application Interface (DAI) allows either two 16-bit or 32-bit Windows programs simultaneous access to one SST card.


Specifications:- Single PC/104 card- Occupies 16 or 32 Kbytes of host computer memory

address space, memory location and size software configurable

- Port addresses 200 to 6F8 supported on 8 byte boundaries

- Memory addresses 8000 to FC00 supported on 16 or32 Kbyte boundaries

- Multiple PC/104 cards can be configured in the same computer

- Optional interrupt generation on network events- Interrupts 2, 3, 5, 7, 11, 12, and 15 supported- Compatible with PLC-2*, PLC-3*, PLC-5,

PLC-5/250, and SLC 5/04 processors- Operational temperature: 0 to 50C (32 to 122oF)- Storage temperature: -25 to 70C (-13 to 158oF)- Power requirement : +5 V @ 500 mA

* Does not support front port current loop connection to PLC-2 or PLC-3 processors

Part Number: 5136-SD-104

Allen-Bradley DH/DH+PC/104 Card

Allen-Bradley DH/DH+ ISA Card

-57-

The SST Allen-Bradley VME card connects yourVME bus computer, programmable controller ormotion controller to Allen-Bradley DH/DH+. Singlechannel or dual channel is available.

Features:- Supports 57.6, 115.2 and 230.4 Kbaud rates on DH+- Open card interface design eases driver development

and allows portability to different VME hosts and operating systems

- Includes C programs for DH/DH+ applications- Diagnostic LEDs for quick verification of card

operation- 6-pin terminal connector for quick connection to

network and ease when making daisy chain connections

Specifications:- Z180 CPU local processor for each channel- 64 Kbytes of static RAM in VME standard address

space, per channel- Occupies 1 Kbyte of short address space, set by DIP

switches on the card- Responds to Standard Supervisory or Non-Privileged

Address Modifier codes- Power requirements: 1 A at 5 V (single channel),

2 A at 5 V (dual channel)- Operating temperature: 0 to 50C (32 to 122oF)- Operating humidity: 5 to 95% non-condensing- Storage temperature: -25 to 70C (-13 to 158oF)- Storage humidity: 0 to 95%- Terminal connector is Phoenix MSTB 1.5/6ST-5.08

VME Specifications:- Size: double height (6U), single width card using P1

connector compatible with ANSI/IEEE 1014- Capabilities: memory - SD16, SDO8 (EO), SA24

registers - SD08(O), SA16- Addressing: standard - 64 Kbytes on any 64 Kbyte

boundary, per channel; short - 1 Kbyte on any 1 Kbyte boundary, per channel

- Interrupts: switch selected level 1-7 software set 8 bit vector release on acknowledge (ROAK)

Part Number: 5136-SD-VME (single channel)5136-SD-VME2 (dual channel)

Allen-BradleyDH/DH+ VME Card

The SST Allen-Bradley 1771 Remote I/O VME card isa single channel scanner that can control up to 32Allen-Bradley 1771 Remote I/O racks.

Features:- Supports 57.6, 115.2, and 230.4 Kbaud rates on

Remote I/O- Open card interface design eases driver development


- Includes C programs for RIO scanner applications- Diagnostic LEDs for quick verification of card

operation- 6-pin terminal connector for quick connection to

network and ease when making daisy chain connections

Specifications:- Z180 CPU local processor- 64 Kbytes of static RAM in VME standard address

space- Occupies 1 Kbyte of short address space, set by DIP

switches on the card- Responds to Standard Supervisory or Non-Privileged

Address Modifier codes- Power requirements: 1 A at 5 V - Operating temperature: 0 to 50C (32 to 122oF)- Operating humidity: 5 to 95% noncondensing- Storage temperature: -25 to 70C (-13 to 158oF)- Storage humidity: 0 to 95%- Terminal connector is Phoenix MSTB 1.5/6ST-5.08




boundary; short - 1 Kbyte on any 1 Kbyte boundary- Interrupts: switch selected level 1-7

software set 8 bit vector release on acknowledge (ROAK)

Part Number: 5136-SD-VME-S

Allen-Bradley 1771 Remote I/O VME Card

-58-

The SST Reliance AutoMax VME card connects yourVMEbus computer to a Reliance AutoMax DCS orRemote I/O network.

Features:- Operates on a Reliance AutoMax DCS network as a

master or slave- Can monitor (passive) or emulate (active) one or more

drops on a Reliance AutoMax remote I/O network- Open card interface design eases driver development


- Includes sample C programs for AutoMax DCS and Remote I/O applications

- Diagnostic LEDs for quick verification of card operation

- Two BNC connectors included for daisy chain configurations

- Software watchdog for improved reliability

Specifications:- NEC V40 local processor- 128 Kbytes of static RAM in VME standard address

space- Occupies 1 Kbyte of short address space, set by DIP

switches on the card- Encoder/decoder and transceiver circuitry for

sending and receiving packets over the coaxial transmission medium

- Responds to Standard Supervisory or Non-PrivilegedAddress Modifier codes

- Power requirements: 2 A at 5 V and 50 mA at +12 V- Operating temperature: 0 to 50C (32 to 122oF)- Storage temperature: -25 to 70C (-13 to 158oF)




boundary; short - 8 bytes on any 1 Kbyte boundary- Interrupts: switch selected level 1-7

software set 8 bit status/IDrelease on acknowledge (ROAK)

Part Number: 5136-REL-VME

Reliance AutoMax DCS andRIO VME Card

-59-

Allen-Bradley DataHighway Plus PCI Card

The SST Data Highway Plus PCI interface cardconnects your PCI bus computer to a RockwellAutomation’s Data Highway Plus (DH+) network.

Features:- Supports 57.6, 115.2 and 230.4 Kbaud rates on Data

Highway Plus - Software support included for emulation of the Allen-

Bradley 178-KT card under Windows NT- Compatible with Rockwell Software’s RSLinx and its

RS family of products- Dual Application Interface (DAI) allows either two

16-bit or 32-bit Windows programs simultaneous access to one SST card


- Fully tested in PCI-exclusive computers

Specifications:- PCI interface card- Occupies 32 Kbyte of host computer memory address

space- Memory location can be mapped under Windows NT- Multiple PCI cards can be configured in the same

computer- Optional interrupt generation on network events- Compatible with PLC-2*, PLC-3*, PLC-5, PLC-

5/250, SLC 5/04, and ControlLogix- Operating temperature: 0 to 50C (32 to 122 oF)- Storage temperature: -25 to 70C (-13 to 158oF)

* Does not support front port current loop connectionto PLC-2 or PLC-3 processors

Part Number: 5136-SD-PCI


SchneiderElectricNetworks

-61-

AffiliationsSST products are referenced in theSchneider Alliancesprogram.

Other SST Schneider Electric Products- Network Gateways / Protocol Converters- I/O Simulation Software- Embedded Network Solutions

Included Free of Charge:- 24/7 global technical support

Connect your computer to a Schneider ElectricNetwork with SST Interface Cards.

Applications include:- PC Control- I/O Monitoring and Simulation- Network Diagnostics

Custom Driver DevelopmentSST offers two options for supporting theModicon card: SST Common DriverArchitecture (CDA) or Memory Mapped Access.The SST CDA reduces software driverdevelopment time without compromising any ofSST’s hardware specific features. It supportsSST’s ControlNet, DeviceNet, Modicon andProfibus cards. SST also provides an opendocumented memory map interface withexample C source code and Windows 32-bitDLLs a

table of contentsdownload.gongkong.com › file › company › 10316 › sst_product_catalo… ·...

Documents