request for quotations: printing and delivery of 2022 (s1

1

Request for Quotations:

Printing and Delivery of 2022 (S1) Study

Materials

Procurement Reference No: G/RFQ/UNAM-88/2021

BIDDER’S NAME: _____________________________________________________

PHYSICAL ADDRESS: _____________________________________________________

TEL/CELL NO: _____________________________________________________

CONTACT PERSON: _____________________________________________________

E-MAIL: _____________________________________________________

Closing Date: 16 November 2021 – 12h00

To be deposited in the Tender Box located at Administration

Building, Ground Floor.

University of Namibia, P/Bag 13301, Mandume Ndemufayo Street, Pionierspark, Tel: +26461 2064588

Email: [email protected]

mailto:[email protected]

1

Letter of Invitation

G/RFQ/UNAM-88/2021 01 NOVEMBER 2021

Dear Prospective Suppliers,

Request for Sealed Quotations: Printing and Delivery of 2022 (S1) Semester 1 Study

Materials

The University of Namibia invites you to submit your best quote for the goods described in detail in

in the specifications section. Any resulting contract shall be subject to the terms and conditions

referred to in the document.

Queries, if any, should be addressed to Mr Embrochius Petersen, at email: [email protected],

Tel: 061 206 3080

Please prepare and submit your quotation in accordance with the instructions given or inform the

undersigned if you will not be submitting a quotation.

Yours faithfully,

Mrs. Veronica Mungonena

Assistant Bursar: Procurement


2

SECTION I: INSTRUCTIONS TO BIDDERS

1. Rights of Public Entity

The University of Namibia reserves the right:

(a) to split the contract as per the lowest evaluated cost per site, or

(b) to accept or reject any quotation or to cancel the quotation process; and

(c) reject all quotations at any time prior to contract award.

2. Preparation of Quotations

You are requested to quote for the services mentioned in Section III, by completing,

signing and returning:

(a) the Quotation Letter in Section II with its annex for Bid Securing Declaration, where

applicable;

(b) the Priced Activity Schedule in Section IV;

(c) the Specifications and Performance Standards in Section V; and

(d) any other attachment as deemed appropriate.

You are advised to carefully read the complete Request for Quotations document, including

the Contract Data Sheet in Section VII, before preparing your quotation. The standard forms

in this document may be retyped for completion but the Bidder is responsible for their

accurate reproduction.

Prospective buyers can view samples of the study guide at the offices below:

• Administration Building - Access Control Officer on the Ground Floor

• Chief Buyers Office – 2nd Floor Office No. Z227

2. Validity of Quotations

The Quotation validity period shall be 90 days from the date of submission deadline.

3. Eligibility Criteria

To be eligible to participate in this Quotation exercise, you should:

(a) have a valid company Registration Certificate;

(b) have an original valid good Standing Tax Certificate;

(c) have an original valid good Standing Social Security Certificate;

(d) have a valid certified copy of Affirmative Action Compliance Certificate, proof

from Employment Equity Commissioner that bidder is not a relevant employer, or

exemption issued in terms of Section 42 of the Affirmative Action Act, 1998;

(e) Submit signed Bid-securing Declaration.

(f) An undertaking on the part of the Bidder that the salaries and wages payable to its

personnel in respect of this proposal are compliant to the relevant laws,

Remuneration Order, and Award, where applicable and that it will abide to sub-

3

clause 4.6 of the General conditions of Contract if it is awarded the contract or part

thereof.

4. Bid Securing Declaration

Bidders are required to subscribe to a Bid Securing Declaration for this procurement

process.

5. Delivery

Delivery shall be 20 days after acceptance/issue of Purchase Order. Deviation in delivery period

shall be considered if such deviation is reasonable.

6. Sealing and Marking of Quotations

Quotations should be sealed in a single envelope, clearly marked with the Procurement

Reference Number, addressed to the Public Entity with the Bidder’s name and contact

information at the back of the envelope.

7. Submission of Quotations

Quotations should be deposited in the Bid Box located at The University of Namibia Main

Campus, Ground Floor, Administration Building, Mandume Ndemufayo Street,

Pionierspark. not later than 16 November 2021 – 12h00. Quotations by post or hand

delivered should reach same address by the same date and time at latest. Late quotations

will be rejected.

Quotations received by e-mail will not be considered.

8. Opening of Quotations

Quotations will be opened internally by the Public Entity immediately after the closing time

referred to in instruction 6 above. A record of the Quotation Opening stating the name of the

bidders, the amount quoted, the presence or absence of a Bid Securing Declaration, will be

posted on the website of the Public Entity and available to any bidder on request within

three (3) working days.

9. Technical Compliance

Bidders shall submit along with their quotation’s documents, a copy of a sample study

guide for Counselling and Wellness in the Workplace (CEH2652).

As soft copy of the study guide can be requested from [email protected]

The Specifications, Performance Requirements and Compliance Sheet details the minimum

specifications of the goods/items to be supplied. The specifications have to be met but no

credit will be given for exceeding the specifications.

10. Prices and Currency of Payment

Prices shall be fixed in Namibian Dollars.

11. Award of Contract


4

The Bidder having submitted the lowest evaluated responsive quotation and qualified to

supply the goods/items and related services shall be selected for award of contract. Award

of contract shall be by issue of a Purchase Order/Letter of Acceptance in accordance with

terms and conditions contained in Section VI: Contract Agreement and General Conditions

of Contract.

12. Notification of Award and Debriefing

The University of Namibia shall after the award of contract promptly inform all

unsuccessful bidders in writing of the name and address of the successful bidder and the

contract amount and post a notice of award on its website within seven (7) days.

Furthermore, the Public Entity shall attend to all requests for debriefing made in writing

within seven (7) days of the unsuccessful bidders being informed of the award.

5

SECTION II: QUOTATION LETTER (to be completed by Bidders)

Complete this form with all the requested details and submit it as the first page of your quotation

with the Price list and documents requested above. A signature and authorisation on this form will

confirm that the terms and conditions of the RFQ prevail over any attachments. If your quotation

is not authorised, it will be rejected.

Quotation addressed to: University of Namibia

Procurement Reference Number: G/RFQ/UNAM-88/2021

Subject matter of Procurement: Printing and Delivery of 2022 (S1) Study

Materials

We offer to supply the items listed in the attached List of Goods and Price Schedule as per the

defined specifications and in accordance with the terms and conditions stated in your Request for

Quotations referenced above.

We confirm that we are eligible to participate in this Quotation exercise and meet the eligibility

criteria specified in Section 1: Instruction to Bidders

We undertake to abide ethical conduct during the procurement process and the execution of any

resulting contract.

We have read and understood the content of the Bid Securing Declaration (BSD) attached hereto

and subscribe fully to the terms and conditions contained therein. We further understand that this

subscription could lead to disqualification on the grounds mentioned in the BD.

The validity period of the Quotation is _________ days [insert number of days] from the date of

the bid submission deadline.

We confirm that the prices quoted in the List of Goods and Price Schedule are fixed and firm and

will not be subject to revision or variation, if we are awarded the contract prior to the expiry date

of the quotation validity.

The delivery period offered from the date of issue of Purchaser Order/ Letter of Acceptance is as

shown in the List of Goods items and Price Schedule.

Quotation Authorised by:

Name of Bidder Company’s Address and seal

Contact Person

Name of Person Authorising the Quotation:

Position: Signature:

Date Phone No./Fax

6

6

Appendix to Quotation Letter

BID SECURING DECLARATION (Section 45 of Act)

(Regulation 37(1)(b) and 37(5))

Date: ........................

Procurement Ref No.: G/RFQ/UNAM-88/2021

To: University of Namibia

I/We* understand that in terms of section 45 of the Act a public entity must include in the bidding

document the requirement for a declaration as an alternative form of bid security.

I/We* accept that under section 45 of the Act, I/we* may be suspended or disqualified in the event of

(a) a modification or withdrawal of a bid after the deadline for submission of bids during

the period of validity;

(b) refusal by a bidder to accept a correction of an error appearing on the face of a bid;

(c) failure to sign a procurement contract in accordance with the terms and conditions set

forth in the bidding document, should I/We* be successful bidder; or

(d) failure to provide security for the performance of the procurement contract if required

to do so by the bidding document.

I/We* understand this bid securing declaration ceases to be valid if I am/We are* not the successful

Bidder

Signed: .................................................................................................................................................. [insert signature of person whose name and capacity are shown]

Capacity of: [indicate legal capacity of person(s) signing the Bid Securing Declaration]

Name: ................................................................................................................................................... [insert complete name of person signing the Bid Securing Declaration]

Duly authorized to sign the bid for and on behalf of: [insert complete name of Bidder]

Dated on ____________ day of __________________, _______ [insert date of signing]

Corporate Seal (where appropriate)

[Note*: In case of a joint venture, the bid securing declaration must be in the name of all partners to

the joint venture that submits the bid.]

7

7

Republic of Namibia

Ministry of Labour, Industrial Relations and Employment Creation

Written undertaking in terms of section 138 of the Labour Act, 2015 and section 50(2)(D) of

the Public Procurement Act, 2015

1. EMPLOYERS DETAILS

Company Trade Name:………………………………………………………

Registration Number :…………………………………………………...

Vat Number: …………………………………………………………………

Industry/Sector: ………………………………………………………………

Place of Business:……………………………………………………………..

Physical Address:……………………………………………………………..

Tell No.:………………………………………………………………………

Fax No.:……………………………………………………………………….

Email Address:………………………………………………………………..

Postal Address:………………………………………………………………..

Full name of Owner/Accounting Officer:……………..……………………...

…………………………………………………………………………….......

Email Address:………………………………………………………………..

8

8

2. PROCUREMENT DETAILS

Procurement Reference No.:……………………………………………………..

Procurement Description: ………………………………………………………..

……………………………………………………………………………………

……………………………………………………………………………………

Anticipated Contract Duration: ………………………………………………….

Location where work will be done, good/services will be delivered: …………..

……………………………………………………………………………………

3. UNDERTAKING

I ……………………………………………[insert full name], owner/representative

of ………………………………………………………….[insert full name of company]

hereby undertake in writing that my company will at all relevant times comply

fully with the relevant provisions of the Labour Act and the Terms and Conditions of Collective

Agreements as applicable.

I am fully aware that failure to abide to such shall lead to the action as stipulated in section 138 of

the labour Act, 2007, which include but not limited to the cancellation of the

contract/licence/grant/permit or concession.

Signature: ……………………………..

Date: …………………………………..

Seal:…………………………………….

Please take note:

1. A labour inspector may conduct unannounced inspections to assess the level of compliance

This undertaking must be displayed at the workplace where it will be readily accessible and visible by the employees rendering service(s) in relations to the goods and services being procured under this contract.

9

9

SECTION III: LIST OF GOODS AND PRICE SCHEDULE

QUOTATION FOR: Printing and Delivery of 2022 Study Materials Procurement Ref No. G/RFQ/UNAM/88-2021

INSTRUCTIONS TO THE PUBLIC ENTITY INSTRUCTIONS TO BIDDERS Bidders shall fill-in columns E - I and fill the total

E= mark with a *if an equivalent is quoted

F= Rate per unit G=Total price for one item ( C x F)

• If an equivalent is quoted, please attach to your quote appropriate

technical information & specification

• Bidders shall fill in and sign the bottom section of this page

A B C D F G I

Item

no.

Description of Goods QTY Unit of

measures

Unit Price

NAD1

Total price

without VAT

NAD

Lead Time

(Weeks/Months)

1. PRINTING AND DELIVERY OF 2022 (S1)

STUDY MATERIALS

PLEASE REFER TO ANNUXERE 1-7 FOR THE

COURSE LIST

SUB TOTAL

VAT @ 15%

TOTAL

NAME: Date:

SIGNATURE:

NAME OF BIDDER:

Key notes: NA=NOT APPLICABLE, NQ=NO QUOTE

10

10

SECTION IV: SPECIFICATIONS AND PERFORMANCE

REQUIREMENTS

SECTION V: SPECIFICATIONS AND COMPLIANCE SHEET


Bidders should complete columns C and D with the specification of the goods offered. Also,

state “comply” or “not comply” and give details of any non-compliance/deviation to the

specification required. Attach detailed technical literature if required. Authorise the

specification offered in the signature block below.

Specifications and Compliance Sheet Authorised By:

Name: Signature:

Position: Date:

Authorised for and on behalf of: Company

Item

No Specification Required Compliance of

Specification

Offered

Details of Non-Compliance/

Deviation

(if applicable)

A* B* C D

1. Perfect Binding for all guides with 60

pages and above

2. Digital printing for all guides

3. Consultation and feedback required on

quality issues and page number

matching

4. Assistance with quality of artwork

5. Signing of sample study guides (below and

above 60 pages)

6. Frequent delivery as per signed off batches

7. Barcode Identifications on all guides

8. A supplier representative present during

every delivery verification

9. Immediate invoicing after delivery

11

11

SECTION VI: GENERAL CONDITIONS OF CONTRACT AND

CONTRACT AGREEMENT

Any resulting contract shall be placed by means of a Purchase Order/Letter of Acceptance and

shall be subject to the General Conditions of Contract (GCC) for the Procurement of Goods - Ref.

G/RFQ-GCC on the website of the Public Entity https://www.unam.edu.na except where

modified by the Special Conditions below.

SECTION VIII: SPECIAL CONDITIONS OF CONTRACT


The clause numbers given in the first column correspond to the relevant clause number of the

GCC.

Subject and GCC

clause reference

Special Conditions

Purchaser

GCC 1.1(h)

University of Namibia

Site

GCC 1.1(m)

University of Namibia

CODeL

Mandume Ndemufayo Street,

Pionierspark

Windhoek

Incoterms Edition

GCC 4.2(b)

Incoterms shall be governed by the rules prescribed in Incoterms 2010.

Notices

GCC 8.1

Any notice shall be sent to the following addresses and the contact name

shall be: Mr Consarve Kanyama, [email protected]

Disputes

GCC 10.2

The rules of procedures for arbitration proceedings pursuant to GCC 10.2

shall be as follows:

_________________________________

Delivery and

Documents

GCC 13.1

Bidders shall indicate the possible duration required for the full delivery of

the items in accordance with calendar days from the date the Purchase Order

or Letter of Acceptance is issued. Our preferred delivery time should not

exceed 35 calendar days.

The documents to be furnished by the Supplier are:

(a) signed delivery note;

(b) Invoice

Price Adjustment

GCC 15.1

The price charge for the Goods supplied and the related Services performed

shall not be adjustable.

https://www.unam.edu.na/


12

12

Subject and GCC

clause reference

Special Conditions

Terms of Payment

GCC 16.1

The structure of payments shall be: full payment following delivery of the

Supplies and submission of an invoice and the documents listed in clause

13.1

Terms of Payment

GCC 16.3

Payments shall be made not later than thirty days after submission of an

invoice and its certification by the Purchaser.

Terms of Payment

GCC 16.4 (a)

The price shall not be adjustable

Payment Period

GCC 16.5

The method and conditions of payments to be made to the Supplier under this

Contract shall be as follows:

On Acceptance: The Contract Price of goods received shall be paid no later

than thirty (30) days of receipt of the Goods upon submission of an invoice

(showing Purchaser’s name; the Procurement Reference number, description

of payment and total amount, signed in original, stamped or sealed with the

company stamp/seal) supported by the Acceptance Certificate issued by the

Purchaser.

Performance

Security

GCC 18.1

No performance security is required.

Discharge of

Performance

Security

GCC 18.4

Not applicable

Packing

GCC 23.2

The packing, marking and documentation within and outside the packages

shall be: Appropriate to ensure that the qualities of the goods are not

compromised.

Insurance

GCC 24.1

As per DDP incoterm

Transportation

GCC 25

The Goods shall be delivered: DDP

Inspection and Test

GCC 26.1

The inspection and tests shall be: at F- Block, CODeL – Unam Main

Campus. CODeL will inspect the goods upon receipt to ascertain the

quality and quantity are as specified.

Location of

Inspection and

Tests

GCC 26.2

The inspections and tests shall be conducted at: F – Block CODeL,

Unam - Main Campus

Liquidated

Damages

GCC 27.1

Liquidated damages for the whole contract are 4% per day. The maximum

amount of liquidated damages for the whole contract is 4% of the final

contract price.

13

13

Subject and GCC

clause reference

Special Conditions

Warranty

GCC 28.3

The period of validity of the warranty shall be: 3Years

For the purpose of the Warranty, the place(s) of the final destination(s) shall

be: F – Block CODeL, Unam Main Campus

Repair and

Replacement

GCC 28.5

The period for repair or replacement shall be: 30 days

14

14

SCHEDULE 1 QUOTATION CHECKLIST SCHEDULE

Procurement Reference No.: G/RFQ/UNAM-88/2021

Description

Attached

Not

Attached

Quotation Letter

List of Goods and Price Schedule

Specification and Compliance Sheet

Bid Securing Declaration

Valid Company Registration Certificate

Valid Company Good Standing Social Security Certificate

Valid Company Good Standing Tax Certificate (Receiver of

Revenue)

Valid certified copy of Affirmative Action Compliance Certificate,

Proof from Employment Equity Commissioner that bidder is not a

Relevant employer, or exemption issued in terms of Section 42 of

Affirmative Action Act, 1998

Evidences for conformity of Goods (Sample)

Disclaimer: The list defined above is meant to assist the Bidder in submitting the relevant

documents and shall not be a ground for the bidder to justify its non-submission of major

documents for its quotation to be responsive. The onus remains on the Bidder to ascertain that it

has submitted all the documents that have been requested and are needed for its submission to be

complete and responsive.

15

15

ANNEXURE 1.

CO DE MO DULE

No. of

Pages No. of Prints

DIPLO MA IN ENTREPRENEURSHIP AND NEW VENTURE MANAGEMENT

ABM2411 Basic Mathematics 216 50

MEM2471 Basic of Entrepreneurial Mind 236 50

MEO2471 New Venture Creation 1A 228 50

EMI3571 Basic Micro Economics 118 100

MEL2571 The Entrepreneurial Leader and Team 84 50

MPV2531 Planning the Venture 2 163 50

MVM2571 New Venture Management 1A 223 50

DIPLO MA IN LO CAL GO VERNMENT STUDIES

PLG2471 Introduction to Local Government 108 50

PNS2471 Basic Numeracy and Statistics 296 50

PPF2571 Local Government Policy Formulation & Evaluation 148 50

PGA2571 Local Government Accounting II 124 80

PMM2571 Project Development and Management 264 50

PLA2571 Local Sustainable Development 194 50

DIPLO MA IN ACCO UNTING AND AUDITING

AFA2411 Basic Financial Accounting A 136 50

BCM3571 Business Mathematics 276 100

AFE3581 Fundamentals of Accounting A 384 100

ACL3631 Commercial Law A 380 50

ABA3691 Business Statistics A 106 200

AIS3659 Computerized Accounting Systems 248 100

AFE3691 Financial Accounting 1A 280 120

AAM3691 Management Accounting 1A 468 80

APG2631 Public Sector and Government Accounting 400 80

First Semester, Year Courses and Core Modules -2020

16

16

ANNEXURE 2.

CO DE MO DULE

No. of

Pages No. of Prints

BACHELO R O F ACCO UNTING (HO NO URS)


AAM3781 Management Accounting 2A 246 60

AUA3751 Auditing 1A 108 85

ACP3751 Company Law and Practice 220 80

AUA3871 Auditing 2 296 25


AMF3871 Financial Management A 285 25

BACHELO R O F BUSINESS ADMINISTRATIO N (HO NO URS)

MBO3671 Organizational Behaviour 1 256 155

MBF3781 Banking and Finance 1A 268 40

MRE3781 Entrepreneurship 1A 166 40

MSM3781 Marketing Management 1A 149 40

MHM3781 Human Resource Management 1A 129 50

MHM3851 Strategic Human Resource Management 2A 142 50

MSM3851 Strategic Marketing 2A 192 50

MBF3851 Banking & Finance 2A 245 80

MST3881 Strategic Management A 200 25

DIPLO MA IN LIFELO NG LEARNING AND CO MMUNITY EDUCATIO N

AFA2480 Introduction to Foundations of Adult Education 151 100

AID2480 Instructional Design 1 190 85

AID2480 Instructional Design 2 60 100

ASD2400 Introduction to Education for Sustainable Development 276 140

AML2400 Intro to Mathematics Literacy 287 120

AES2501 Introduction to Entrepreneurship 130 100

AHP3511/AHP2511 Historical & Philosophical Foundations of Adult Education 116 145

ACD3501/ACD2521 Community Development Studies 1 117 140

AMS3501/AMS2501 Management Studies 1 130 140

ASP3501/ASP2501 Sociology of Adult Education 102 150

APT2580/APT3580 Curriculum, Primer Design & Teaching 137 150

AEP3601/AEP2601 English for Lifelong Learners and Community Educators 1 270 135

AER3701/AER2701 Principles of Adult Education Research 114 150

ASD3601/ASD2601 Education for Sustainable Development 2 148 150

ACT2721/ACT3721 IMTE for Adult Education 173 145

AMS3610/AMS2610 Management Studies 2 156 125

ACD2610/ACD3610 Community Development Studies 2 151 150


17

17

ANNEXURE 3.

CO DE MO DULE

No. of

Pages No. of Prints

BACHELO R IN EDUCATIO N (LIFELO NG LEARNING AND CO MMUNITY EDUCATIO N)

AFR3701 Educational Research 1 95 50

ALL3711 Lifelong Learning 172 145

AEC3731 Economics in Adult Education 171 115

AET3711 Entrepreneurship 248 100

AMS3710 Management Studies 3 339 85

ACD3710 Community Development Studies 3 324 140

AIN3891 Internship 113 125

AMP3811 Project Management 238 85

APS3811 Policy Studies in Adult Education 147 95

AMD3810 Management of Lifelong Learning and Sustainable Development 232 145

ACD3810 Community Education and Training for Sustainable Development 153 145

APP3880 Educational Research Report 70 85

DIPLO MA IN EDUCATIO NAL MANAGEMENT AND LEADERSHIP

AFI3701/CFI4701 Introduction to Educational Research 160 25

FMM4701 Project Phase 1 142 25

FMH4781Human Resources Management

196 25

DIPLO MA IN SECO NDARY EDUCATIO N (PRO FESSIO NAL TRAINING)

WHAT SHO ULD BE PRINTED

CFU3721/CFP3721/CFE4701/CF

E3701Assessment and Evaluation of Learning

250 400

CFP3781/CFU3781/CFS4621 Educational Research 157 100

CFS4621 Integrated Media and Technology Ed 1 84 85

CFS3729 Integrated Media and Technology 2 112 150

CLE3700/CLE4700 Teaching Methods of English Module 1 111 50




18

18

ANNEXURE 4.

CO DE MO DULE No. of Pages No. of Prints

BACHELO R O F EDUCATIO N (PRE- AND LO WER PRIMARY)

LLU3501/LLP3501 Language in Society 185 300

LLP3521 Children’s Literature 1 160 100

MMP3500 Mathematics and Numeracy Development 1 216 50

MPU3620/MPP3620 Physical and Health Education 1 212 450

PSU3721/PSP3721 Childhood Learning 49 350

MSP3500 Environmental Education 1 211 250


MMP3600 Numeracy and Mathematics Education 2 47 210

LEP3600 English Language Education 2 196 300

LRU3521 Religious and Moral Education 52 200


LEP3700 English Language Education 3 195 220

LED3800 English Language Education 4 BOOK A 172 250

MMD3880 Learning Support in the Mathematics Classroom* 80 245

CFD3880 Assessment and Evaluation 232 200

FMD3880 School Leadership and Management 173 185

CCD3880 Curriculum Planning and Development 169 150

LKP3600 Khoekhoegowab Language Education 2 219 50

LWP3600 Oshikwanyama Language Education 2 80 45

LOP3600 Oshindonga Language Education 2 88 45

LSP3600 Rukwangali Language Education 2 109 45

LAP3700 Afrikaans Language Education 3 295 45

LKP3700 Khoekhoegowab Language Education 3 219 45

LRP3600 Rukwangali Language Education 2 109 45

MPP3721/MPU3780 Physical and Health Education 2 394 200


19

19

ANNEXURE 5.

CO DE MO DULE

No. of

Pages No. of Prints

BACHELO R O F EDUCATIO N (SECO NDARY)

PSU3741/PSI4701/PSI3701 Inclusive Education 151 265

LAF3581 Afrikaans Language Usage 164 65

LAF3611 Afrikaans Linguistics 224 65

LAF3631 Foundations of Dutch Language and Literature 180 50

LAF3860 Afrikaans and Dutch Novel and Drama 174 45

EMA3671 Intermediate Macro-Economics I 117 100

EMI3671 Intermediate Micro-Economics I 196 110

EIT3771 International Trade 351 55

LEN3581 Fundamentals of English Language Studies 272 70

LEN3611 Lexis and Basic Grammar 332 120

LEN3631 Approaches to Poetry Analysis 238 85

LEL3820 An Overview of African Literature * 582 85

LEN3820 Approaches to Stylistics 266 150

LEN3840 Approaches to Language Analysis * 368 125

VPD3581 Principles of Design 1 202 55

VTF3600 Textiles and Fashion Basics 234 50

VTS3611 Textiles, Dyed, Painted and Printed 430 50

VFS3611 Fashion Studies 1 106 25

HGE3581 African Civilisation 118 85

HGE3651 Early Southern Africa History 158 125

HGE3611 The Making of the Atlantic World 359 125

HGE3751 Namibia 1920 - 1990 182 125

HGE3820 Public History/Museum and Heritage Studies 220 125

MHE3501 Applied Science for Home Economics 136 55

MHE3511 Intro to Household Resource Management 200 50

MHE3611 Household Resource Management 124 60

MHE3711 Applied Nutrition 248 75

MAT3511 Basic Mathematics 184 125

MAT3521 Matrices and Complex Numbers 168 20

MAT3501 Analytic Geometry 168 20

MAT3611 Calculus 1 256 80

MAE3771 Function of Single Variables I 116 75

BLG3511 Introduction to Biology 301 65

MBE3771 Cell Molecular Biology, Microbiology and Genetics for Educators 156 85

PHY3511 Physics for Physical Science I 456 95

CHM3511 Chemistry IA 244 100

PHE3751 Modern Physics for Educators 176 110


20

20

ANNEXURE 6.

CO DE MO DULE

No. of

Pages No. of Prints

BACHELO R O F EDUCATIO N (UPPER PRIMARY) HO NO URS

CFU3749 Curriculum Studies-(Use Curriculum Planning and Development) 169 150

LAU3611 Afrikaans Language Education 2A 105 50

LKU3611 Khoekhoegowab Language Education 2A 97 45

LHU3611 Otjiherero Language Education 2A 125 25

MAU3681 Agriculture Education 1 123 40

MAU3780 Agriculture Education 3 170 45

LRU3721 Religious and Moral Education 3 124 50

MMU3611 Mathematics Education 1A 133 25

MMU3780 Mathematics Education 2 125 45

MSU3610 Integrated Natural Science and Health Education 2 198 100

MSU3780 Integrated Natural Science and Health Education 3 142 150

LSU3611 Social Studies Education 2A 115 45

LSU3790 Social Studies Education 3 92 45

LSD3890 Social Studies Education 4 137 65

MDU3681 Design and Technology Education 1 127 20

MHU3681 Home Ecology Education 1 71 55

MHU3780 Home Ecology Education 3 198 100

MPP3620 Physical and Health Education 1 212 350

LEU3611 ENGLISH LANGUAGE EDUCATION 2 113 56

LSP3700 Silozi Language Education 3 215 50

LRU3611 Rukwangali Language Education 2A 102 25

LRU3780 Rukwangali Language Education 3 132 25

LRU3880 Rukwangali Language Education 4 241 25

LAD3880 Afrikaans Language Education 4 BOOK A 359 65

PSD3880 Inclusive Education 2 66 25

LWU3611 Oshikwanyama Language Education 2 A 200 35

LWD3880 Oshikwanyama Language Education 4 137 45

LZD3880 Silozi Language Education 4 194 45

DIPLO MA IN LABO UR AND EMPLO YMENT STUDIES

SHT2411 The History & Role of Trade Unions 134 50

MBB2531 Basic Business Management 150 50

CLM2511 Labour Market Theories and Policies 90 85

PAR2511 Arbitration 106 40

MHC2511 Human Capital Development 223 25


21

21

ANNEXURE 7.

CO DE MO DULE

No. of

Pages No. of Prints

CERTIFICATE IN HIV/AIDS EDUCATIO N AND CO UNSELLING

CEH1411 The Significance of HIV and Aids 143 134

CEH1431 The Continuum of Care 113 125

CEH1480 Introduction to the Practice of Counselling 95 55

DIPLO MA IN HIV/AIDS MANAGEMENT AND CO UNSELLING

CEH2411 HIV/AIDS in the Namibian Context 114 55

CEH2500 Research,monitor and evauluation of Health Programmes 308 150

CEH2431 HIV/AIDS Counselling 137 145

CEH2511 HIV/AIDS Stigma and Discrimation 140 165

MHE2531 Resource Management 211 145

CEH2531 Project Management 162 150

CEH2551 Management and leadership Issues 112 150

CO RE

LEG2410 English for General Communication 312 100

LEA3519 English for Academic Purposes 172 85

EET3589/EET4589 English for Teachers 1 292 50

FMS4621 Educational Foundations 1 96 300


22

22