pumps diaphragm pump - altek international · 2018-04-05 · 6 p120 linear steady state...
TRANSCRIPT
© 06/2016 altek GmbH33
PumpsDiaphragm Pumpaltek produces high-quality products. This is refl ected in everything we do. Thus, it is one of our principles that our performance data represent genuine values un-der practi cal conditi ons. Besides other att ributes, altek pumps are especially well known for their robustness, re-liability and long service life. Due to its compact design, altek piston diaphragm pumps can be easily mounted in a wide range of sprayers. In additi on to that, thanks to the modular principle uti lised by altek, all pumps can be constructed in such way, that sucti on and pressure connecti ons can be fi tt ed on the left - and the right-hand side of the machine.
Long service life and operati onal reliability
Easy to repair
Flexible mounti ng
Safe to run dry
Liquid ferti liser-proof
Self-priming up to 4 meters
Integrated accumulator ensures, that constant pressure is maintained
Perbunan® (NBR) or Desmopan® (dp) diaphragms
© 06/2016 altek GmbH4
P70 linear steady state characteristi cs integrated hydraulic accumulator safe to run dry (liquid) self-priming up to 4 meters depth liquid ferti liser-proof (AHL/UAN)
Capacity at 5 bar: 70 l/minNominal speed: 540 rpmOperati ng ti me pressure: max. 15 barShort-term pressure: max. 20 barSpeed range: 450-600 rpmSpline shaft : DIN 9611 / ISO 500Standard working diaphragms: 2 x NBRAccumulator diaphragms: 1 x NBRInlet-ø sucti on side: AS40Outlet-ø pressure side: AS30 Lubricati on: Oil bathWeight: 8,7 kgMaterial: Cast aluminium, parti ally anodised, NBR seals, POM, stainless steel: 1.4305Opti ons: Desmopan® diaphragms Through shaft Hydraulic drive
Pump opti ons
Arti cle-No. Type
82372Piston diaphragm pump P70with bracket and pto protecti on
More variati ons on request
Recommended fi tti ngs inlet (AS2)
08275 Plug-in hose tail AS40/ø39/90° cpl
06247 Plug-in hose tail AS40/ø39 cpl
Recommended fi tti ngs outlet (AS1)
08337 Plug-in hose tail AS30/ø25/90° cpl
33793 Plug-in hose tail AS30/ø33/90° cpl
81119 Plug-in hose tail AS30/ø25 cpl
01399 Plug-in hose tail AS30/ø33 cpl
Pumps P70
A B C
152 250 351
D1 D2 EMin
282 132 110
EMax F G
225 250 M12
specifi ed in mm
40
45
50
55
60
65
70
75
300 350 400 450 500 540
Flow
rate
[l/m
in]
Speed [1/min]
Power consumption at 540 rpm:0 bar:0,8 kW; 5 bar:1,2 kW; 10 bar:1,9 kW; 15 bar:2,5 kW
5 bar suction
© 06/2016 altek GmbH5
Capacity at 5 bar: 100 litres/minNominal speed: 540 rpmOperati ng ti me pressure: max. 15 barShort-term pressure: max. 20 barSpeed range: 450-600 rpmSpline shaft : DIN 9611 / ISO 500Standard working diaphragms: 2 x NBRAccumulator diaphragms: 1 x NBRInlet-ø sucti on side: AS40Outlet-ø pressure side: AS30 Lubricati on: Oil bath Weight: 11,8 kg Material: Cast aluminium, parti ally anodised, NBR seals, POM, stainless steel: 1.4305Opti ons: Desmopan® diaphragms Hydraulic drive
P100 linear steady state characteristi cs integrated hydraulic accumulator safe to run dry (liquid) self-priming up to 4 meters depth liquid ferti liser-proof (AHL/UAN)
A B C
170 264 361
D1 D2 EMin
245 95 110
EMax F G
225 250 M12
specifi ed in mm
Pump opti ons
Arti cle-No. Type
83117Piston diaphragm pump P100with bracket and pto protecti on
More variati ons on request
Recommended fi tti ngs inlet (AS2)
17409 Plug-in hose tail AS40/ø46 cpl
08275 Plug-in hose tail AS40/ø39/90° cpl
06247 Plug-in hose tail AS40/ø39 cpl
Recommended fi tti ngs outlet (AS1)
08337 Plug-in hose tail AS30/ø25/90° cpl
33793 Plug-in hose tail AS30/ø33/90° cpl
81119 Plug-in hose tail AS30/ø25 cpl
01399 Plug-in hose tail AS30/ø33 cpl
Pumps P100
65
70
75
80
85
90
95
100
105
350 400 450 500 540
Flow
rate
[l/m
in]
Speed [1/min]
Power consumption at 540 rpm:0 bar:1,1 kW; 5 bar:1,6 kW; 10 bar:2,5 kW; 15 bar:3,5 kW
5 bar suction
6
P120 linear steady state characteristi cs integrated hydraulic accumulator safe to run dry (liquid) self-priming up to 4 meters depth liquid ferti liser-proof (AHL/UAN)
Pump opti ons
Arti cle-No. Type
83035Piston diaphragm pump P120with bracket and pto protecti on
More variati ons on request
Recommended fi tti ngs inlet (AS2)
17157 Plug-in hose tail AS50/ø46 cpl
17330 Plug-in hose tail AS50/ø46/90° cpl
22040 Plug-in hose tail AS50/ø39 cpl
24891 Plug-in hose tail AS50/ø39/90° cpl
Recommended fi tti ngs outlet (AS1)
08337 Plug-in hose tail AS30/ø25/90° cpl
33793 Plug-in hose tail AS30/ø33/90° cpl
81119 Plug-in hose tail AS30/ø25 cpl
01399 Plug-in hose tail AS30/ø33 cpl
Pumps P120
Capacity at 5 bar: 120 l/minNominal speed: 540 U/minOperati ng ti me pressure: max. 15 barShort-term pressure: max. 20 barSpeed range: 450-600 U/minSpline shaft : DIN 9611/ISO 500Standard working diaphragms: 2 x NBRAccumulator diaphragms: 2 x NBRInlet-ø sucti on side: AS50Outlet-ø pressure side: AS30Lubricati on: Oil bathWeight: 13,2 kgMaterial: Cast aluminium, parti ally anodised, NBR seals, POM, stainless steel: 1.4305Opti ons: Desmopan® diaphragms Hydraulic drive
A B C
174 264 364
D1 D2 EMin
254 104 110
EMax F G
225 250 M12
Specifi ed in mm
80
85
90
95
100
105
110
115
120
125
350 400 450 500 540
Flow
rate
[l/m
in]
Speed [1/min]
Power consumption at 540 rpm:0 bar:1,4 kW; 5 bar:2,2 kW; 10 bar:3,2 kW; 15 bar:4,0 kW
5 bar suction
© 06/2016 altek GmbH
Pump opti ons
Arti cle-No. Type
82378Piston diaphragm pump P150with bracket and pto protecti on
More variati ons on request
Recommended fi tti ngs inlet (AS2)
17157 Plug-in hose tail AS50/ø46 cpl
17330 Plug-in hose tail AS50/ø46/90° cpl
22040 Plug-in hose tail AS50/ø39 cpl
24891 Plug-in hose tail AS50/ø39/90° cpl
Recommended fi tti ngs outlet (AS1)
08337 Plug-in hose tail AS30/ø25/90° cpl
33793 Plug-in hose tail AS30/ø33/90° cpl
81119 Plug-in hose tail AS30/ø25 cpl
01399 Plug-in hose tail AS30/ø33 cpl
Pumps P150
P150 linear steady state characteristi cs integrated hydraulic accumulator safe to run dry (liquid) self-priming up to 4 meters depth liquid ferti liser-proof (AHL/UAN)
Capacity at 5 bar: 150 l/minNominal speed: 540 U/minOperati ng ti me pressure: max. 15 barShort-term pressure: max. 20 barSpeed range: 450-600 U/minSpline shaft : DIN 9611/ISO 500Standard working diaphragms: 4 x NBRAccumulator diaphragms: 1 x NBRInlet-ø sucti on side: AS50Outlet-ø pressure side: AS30Lubricati on: Oil bathWeight: 16,2 kgMaterial: Cast aluminium, parti ally anodised, NBR seals, POM, stainless steel: 1.4305Opti ons: Desmopan® diaphragms Hydraulic drive
A B C
281 250 350,5
D1 D2 EMin
361 211 110
EMax F G
225 250 M12
Specifi ed in mm
7
75
80
85
90
95
100
105
110
115
120
125
130
135
140
300 350 400 450 500 540
Flow
rate
[l/m
in]
speed [1/min]
Power consumption at 540 rpm:0 bar:0,8 kW; 5 bar:1,8 kW; 10 bar:3,0 kW; 15 bar:4,1 kW
5 bar suction
© 06/2016 altek GmbH
© 06/2016 altek GmbH8
P200 linear steady state characteristi cs integrated hydraulic accumulator through shaft safe to run dry (liquid) self-priming up to 4 meters depth liquid ferti liser-proof (AHL/UAN)
Pumps P200
Pump opti ons
Arti cle-No. Type
82406Piston diaphragm pump P200with bracket and pto protecti on
More variati ons on request
Recommended fi tti ngs inlet (AS2)
17330 Plug-in hose tail AS50/ø46/90° cpl
17157 Plug-in hose tail AS50/ø46 cpl
Recommended fi tti ngs outlet (AS1)
08337 Plug-in hose tail AS30/ø25/90° cpl
33793 Plug-in hose tail AS30/ø33/90° cpl
81119 Plug-in hose tail AS30/ø25 cpl
01399 Plug-in hose tail AS30/ø33 cpl
A B C
310 274 357
D1 D2 EMin
390 240 110
EMax F G
225 250 M12
Specifi ed in mm
Capacity at 5 bar: 200 l/minNominal speed: 540 U/minOperati ng ti me pressure: max. 15 barShort-term pressure: max. 20 barSpeed range: 450-600 U/minSpline shaft : DIN 9611/ISO 500Standard working diaphragms: 4 x NBRAccumulator diaphragms: 1 x NBRInlet-ø sucti on side: AS50Outlet-ø pressure side: AS30Lubricati on: Oil bathWeight: 22 kg/26 kgMaterial: Cast aluminium, parti ally anodised, NBR seals, POM, stainless steel: 1.4305Opti ons: Desmopan® diaphragms Through shaft Hydraulic drive
115
125
135
145
155
165
175
185
195
205
300 350 400 450 500 540300 350 400 450 500 540
Flow
rate
[l/m
in]
speed [1/min]
Power consumption at 540 rpm:0 bar:1,2 kW; 5 bar:2,7 kW; 10 bar:4,4 kW; 15 bar:6,2 kW0 bar:1,2 kW; 5 bar:2,7 kW; 10 bar:4,4 kW; 15 bar:6,2 kW
5 bar suction
Pumps P260
© 06/2016 altek GmbH9
P260 linear steady state characteristi cs integrated hydraulic accumulator through shaft safe to run dry (liquid) self-priming up to 4 meters depth liquid ferti liser-proof (AHL/UAN)
Pump opti ons
Arti cle-No. Type
82566Piston diaphragm pump P260
82454Piston diaphragm pump P260with hydraulic motor OMR 50 and bracket
More variati ons on request
Recommended fi tti ngs inlet (AS2)
-- Fitti ngs to suit G2“ male
Recommended fi tti ngs outlet (AS1)
33793 Plug-in hose tail AS30/ø33/90° cpl
01399 Plug-in hose tail AS30/ø33 cpl
Capacity at 5 bar: 260 l/minNominal speed: 540 U/minOperati ng ti me pressure: max. 15 barShort-term pressure: max. 20 barSpeed range: 450-600 U/minSpline shaft : DIN 9611/ISO 500Standard working diaphragms: 4 x NBRAccumulator diaphragms: 1 x NBRInlet-ø sucti on side: G2 (BSP) male; d=47Outlet-ø pressure side: AS30Lubricati on: Oil bathWeight: 30 kgMaterial: Cast aluminium,
parti ally anodised, NBR seals, POM,stainless steel: 1.4305
Opti ons: Desmopan® diaphragms Through shaft Hydraulic drive
A B C
316 264 360
D1 D2 EMin
396 246 110
EMax F G
225 250 M12
Specifi ed in mm
140
150
160
170
180
190
200
210
220
230
240
250
260
300 350 400 450 500 540300 350 400 450 500 540
Flow
rate
[l/m
in]
speed [1/min]
Power consumption at 540 rpm:5 bar:3,6 kW; 10 bar:5,7 kW; 15 bar:7,8 kW
5 bar suction
© 06/2016 altek GmbH10
P300 linear steady state characteristi cs integrated hydraulic accumulator through shaft safe to run dry (liquid) self-priming up to 4 meters dept liquid ferti liser-proof (AHL/UAN)
Pumps P300
Pump opti ons
Arti cle-No. Type
81942Piston diaphragm pump P300with bracket and pto protecti on
More variati ons on request
Recommended fi tti ngs inlet (AS2 and AS4)
-- Fitti ngs G2½ male
Recommended fi tti ngs outlet (AS1 and AS3)
08874 Plug-in hose tail AS40/ø33/90° cpl
08275 Plug-in hose tail AS40/ø39/90° cpl
04581 Plug-in hose tail AS40/ø33 cpl
06247 Plug-in hose tail AS40/ø39 cpl
80333 Blank Plug AS40 cpl
A B C
450 300 360
D1 D2 EMin
530 390 110
EMax F G
225 250 M12
Specifi ed in mm
Capacity at 5 bar: 300 l/minNominal speed: 540 U/minOperati ng ti me pressure: max. 15 barShort-term pressure: max. 20 barSpeed range: 450-600 U/minSpline shaft : DIN 9611/ISO 500Standard working diaphragms: 6 x NBRAccumulator diaphragms: 1 x NBRInlet-ø sucti on side: 2 x G2½ (BSP)Outlet-ø pressure side: AS40Lubricati on: Oil bathWeight: 38 kgMaterial: Cast aluminium, parti ally anodised, NBR seals, POM, stainless steel: 1.4305Opti ons: Desmopan® diaphragms Through shaft Hydraulic drive Through shaft
190
200
210
220
230
240
250
260
270
280
290
300
310
350 400 450 500 540
Flow
rate
[l/m
in]
speed [1/min]
Flow rate at 450 rpm:5 bar: 4,5 kW; 10 bar: 7,0 kW; 15 bar: 9,5 kW
5 bar suction
© 06/2016 altek GmbH11
P380 linear steady state characteristi cs integrated hydraulic accumulator through shaft safe to run dry (liquid) self-priming up to 4 meters depth liquid ferti liser-proof (AHL/UAN)
Pumps P380
Pump opti ons
Arti cle-No. Type
83887 Piston diaphgarm pump P380
83888Piston diaphragm pump P380with bracket and pto protecti on
More variati ons on request
Recommended fi tti ngs inlet (AS2 and AS4)
-- Fitti ngs G2½ male
Recommended fi tti ngs outlet (AS1 and AS3)
08874 Plug-in hose tail AS40/ø33/90° cpl
08275 Plug-in hose tail AS40/ø39/90° cpl
04581 Plug-in hose tail AS40/ø33 cpl
06247 Plug-in hose tail AS40/ø39 cpl
80333 Blank Plug AS40 cpl
Capacity at 5 bar: 380 l/minNominal speed: 540 U/minOperati ng ti me pressure: max. 15 barShort-term pressure: max. 20 barSpeed range: 450-600 U/minSpline shaft : DIN 9611/ISO 500Standard working diaphragms: 6 x NBRAccumulator diaphragms: 1 x NBRInlet-ø sucti on side: 2 x G2½ (BSP)Outlet-ø pressure side: 2 x AS40Lubricati on: Oil bathWeight: 44 kgMaterial: Cast aluminium, parti ally anodised, NBR seals, POM, stainless steel: 1.4305Opti ons: Desmopan® diaphragms Through shaft Hydraulic drive Through shaft
A B C
456 300 363
D1 D2 EMin
536 386 110
EMax F G
225 250 M12
Specifi ed in mm
210220230240250260270280290300310320330340350360370380
300 350 400 450 500 540300 350 400 450 500 540
Flow
rate
[l/m
in]
speed [1/min]
Power consumption at 540 rpm:5 bar:5,0 kW; 10 bar:8,3 kW; 15 bar:11,5 kW
5 bar suction
© 06/2016 altek GmbH12
P200/P200 linear steady state characteristi cs integrated hydraulic accumulator safe to run dry (liquid) self-priming up to 4 meters depth liquid ferti liser-proof (AHL/UAN)
Pumps P200/P200
Pump opti ons
Arti cle-No. Type
83126Piston diaphragm pump withbracket and pto protecti onwith two separate P200/P200 out puts
More variati ons on request
Recommended fi tti ngs inlet (AS2 and AS4)
17330 Plug-in hose tail AS50/ø46/90° cpl
17157 Plug-in hose tail AS50/ø46 cpl
Recommended fi tti ngs outlet (AS1 and AS3)
08337 Plug-in hose tail AS30/ø25/90° cpl
33793 Plug-in hose tail AS30/ø33/90° cpl
81119 Plug-in hose tail AS30/ø25 cpl
01399 Plug-in hose tail AS30/ø33 cpl
A B C
590 283 357
D1 D2 EMin
670 520 110
EMax F G
225 250 M12
Specifi ed in mm
Capacity at 5 bar: 2 x200 l/minNominal speed: 540 U/minOperati ng ti me pressure: max. 15 barShort-term pressure: max. 20 barSpeed range: 450-600 U/minSpline shaft : DIN 9611/ISO 500Standard working diaphragms: 8 x NBRAccumulator diaphragms: 2 x NBRInlet-ø sucti on side: 2 x AS50Outlet-ø pressure side: 2 x AS30Lubricati on: Oil bathWeight: 49,6 kgMaterial: Cast aluminium, parti ally anodised, NBR seals, POM, stainless steel: 1.4305Opti ons: Desmopan® diaphragms Hydraulic drive
110
120
130
140
150
160
170
180
190
200
210
300 350 400 450 500 540300 350 400 450 500 540
Flow
rate
[l/m
in]
speed [1/min]
Power consumption at 540 rpm:5 bar: 5,5 KW; 10 bar: 9,0 KW; 15 bar: 12,5 KW
5 bar, suction
© 06/2016 altek GmbH13
P500 linear steady state characteristi cs integrated hydraulic accumulator safe to run dry (liquid) self-priming up to 4 meters depth liquid ferti liser-proof (AHL/UAN)
Pumps P500
Pump opti ons
Arti cle-No. Type
82656Piston diaphragm pump P500
More variati ons on request
Recommended fi tti ngs inlet (AS2 and AS4)
-- Fitti ngs to G3“ male
Recommended fi tti ngs outlet (AS1 and AS3)
08874 Plug-in hose tail AS40/ø33/90° cpl
08275 Plug-in hose tail AS40/ø39/90° cpl
04581 Plug-in hose tail AS40/ø33 cpl
06247 Plug-in hose tail AS40/ø39 cpl
80333 Blank Plug AS40 cpl
Capacity at 5 bar: 500 l/minNominal speed: 540 U/minOperati ng ti me pressure: max. 15 barShort-term pressure: max. 20 barSpeed range: 450-600 U/minSpline shaft : DIN 9611/ISO 500Standard working diaphragms: 8 x NBRAccumulator diaphragms: 1 x NBRInlet-ø sucti on side: 2 x G3 male; d=75 mmOutlet-ø pressure side: AS40Lubricati on: Oil bathWeight: 52,5 kgMaterial: Cast aluminium,
parti ally anodised, NBR seals, POM,stainless steel: 1.4305
Opti ons: Desmopan® diaphragms Hydraulic drive
A B C
596 320 367,5
D1 D2 EMin
676 526 110
EMax F G
225 250 M12
Specifi ed in mm
280
310
340
370
400
430
460
490
300 350 400 450 500 540
Flow
rate
[l/m
in]
speed [1/min]
Power consumption at 540 rpm:5 bar:6,8 kW; 10 bar:10,5 kW; 15 bar:14,7 kW
5 bar suction
© 06/2016 altek GmbH14
P260/P260 linear steady state characteristi cs integrated hydraulic accumulator safe to run dry (liquid) self-priming up to 4 metres depth liquid ferti liser-proof (AHL/UAN)
Pumps P260/P260
Pump opti ons
Arti cle-No. Type
83419 Kolbran pump P260/P260with bracket and pto protecti on
More variati ons on request
Recommended fi tti ngs inlet (AS2)
-- Fitti ngs G2“ BSP male
Recommended fi tti ngs outlet (AS1)
33793 Plug-in hose tail AS30/ø33/90° cpl
01399 Plug-in hose tail AS30/ø33 cpl
A B C
596 262 360
D1 D2 EMin
676 526 110
EMax F G
225 250 M12
Specifi ed in mm
Capacity at 5 bar: 2 x 260 l/minNominal speed: 540 U/minOperati ng ti me pressure: max. 15 barShort-term pressure: max. 20 barSpeed range: 450-600 U/minSpline shaft : DIN 9611/ISO 500Standard working diaphragms: 8 x NBRAccumulator diaphragms: 2 x NBRInlet-ø sucti on side: 2 x G2 male, d=47Outlet-ø pressure side: 2 x AS30Lubricati on: Oil bathWeight: 56 kgMaterial: Cast aluminium, parti ally anodised, NBR seals, POM, stainless steel: 1.4305Opti ons: Desmopan® diaphragms Hydraulic drive
140
150
160
170
180
190
200
210
220
230
240
250
260
300 350 400 450 500 540300 350 400 450 500 540
Flow
rate
[l/m
in]
speed [1/min]
Power consumption at 540 rpm:5 bar: 7,5 KW; 10 bar: 11,0 KW; 15 bar: 16,0 KW
5 bar suction
© 06/2016 altek GmbH15
P260/P260/P260 linear steady state characteristi cs integrated hydraulic accumulator safe to run dry (liquid) self-priming up to 4 metres depth liquid ferti liser-proof (AHL/UAN)
Pumps P260/P260/P260
Pump opti ons
Arti cle-No. Type
83347piston diaphragm pump P260/P260/P260with bracket and pto protecti on
More variati ons on request
Recommended fi tti ngs inlet (AS2 / AS4 / AS6)
-- Fitti ngs to G3“ male
Recommended fi tti ngs outlet (AS1 / AS2 / AS5)
33793 Plug-in hose tail AS30/ø33/90° cpl
01399 Plug-in hose tail AS30/ø33 cpl
Capacity at 5 bar: 3 x 260 l/minNominal speed: 540 U/minOperati ng ti me pressure: max. 15 barShort-term pressure: max. 20 barSpeed range: 450-600 U/minSpline shaft : DIN 9611/ISO 500Standard working diaphragms: 12 Desmopan®Accumulator diaphragms: 3 x NBRInlet-ø sucti on side: 3 x G2“ male; d=47Outlet-ø pressure side: 3 x AS30Lubricati on: Oil bathWeight: 86 kgMaterial: Cast aluminium, parti ally anodised, NBR seals, POM, stainless steel: 1.4305Opti ons: Hydraulic drive
A B C
876 264 360
D1 D2 EMin
956 806 110
EMax F G
225 250 M12
Specifi ed in mm
140
150
160
170
180
190
200
210
220
230
240
250
260
300 350 400 450 500 540300 350 400 450 500 540
Flow
rate
[l/m
in]
speed [1/min]
Power consumption at 540 rpm:5 bar: 11,0 KW; 10 bar: 17,5 KW; 15 bar: 23,5KW
5 bar suction
© 06/2016 altek GmbH16
Pumps Diaphragms
Product Arti cle-No. Type Material D mm d mm
1 Working diaphragms 80629
Diaphragm N P70/P150with double-side lip and hole, standard series
NBR 106 --
80630Diaphragm N P100/P200/P300with double-side lip and hole, standard series
NBR 121 --
81522Diaphragm N P120/P260/P380/P500with double-side lip and hole, standard series
NBR 127 14
2 Working diaphragms 83443
Diaphragm D-LL P70/P150with double-side lip and hole
Desmopan® 106 14
83441Diaphragm D-LL P100/P200/P300with double-side lip and hole,
Desmopan® 121 14
83228Diaphragm D-LL P120/P260/P380/P500with double-side lip and hole
Desmopan® 127 14
3.1 Working diaphragms 07239
Diaphragm N P70/P150without hole
NBR 106 –
22800Diaphragm N P100/P200/P300without hole
NBR 121 –
19056Diaphragm N P120without hole
NBR 127 –
80075Diaphragm N P260/P380/P500with hole and one-side lip
NBR 127 14
3.2 Working diaphragms 13969
Diaphragm V P70/P150without hole
Viton® 106 –
19057Diaphragm V P120without hole
Viton® 127 –
4 Accumulator diaphragms02627 Accumulator diaphragms N P70/P150/P50 NBR 101 –
02709Accumulator diaphragms N P100/P120/P200/P260/P300/P380/P500
NBR 128 –
high durability materials for all purposes solvent proof low cost
Working diaphragms
1 2 3.1 3.2 4
© 06/2016 altek GmbH17
Pumps Hydraulic drive
retrofi table to existi ng pumps hydraulic easy mounti ng of motors
Mounting parts hydraulic drive P70 – P380
P70–P380
Arti cle-No. Type Material
81572 coupling hydraulic motor P70-P380 Steel
81574 mounti ng fl ansh for hydraulic motor P70- P380 Aluminium
81576 hydraulic motor OMR 50 151-0710 Steel
81571 shim (4x) Steel
02622 bracket Steel
47561 bolt for bracket (2x) Steel
02644 bolt for mounti ng fl ansh for hydrulic motor (2x) Steel
82607 81572 81576 81571
© 06/2016 altek GmbH18
Pumps Mounting parts
Mounting parts hydraulic drive >P380
> P380
Arti cle-No. Type Material
83442 Coupling hydraulic motor P500 Steel
82607 Mounti ng fl ansh for hydraulic motor P500 Aluminium
83387 Hydromotor OMS 100 Steel
81571 shim (4x) Steel
02622 bracket Steel
47561 bolt for bracket (2x) Steel
02644 Schrauben für den Flansch für Hydromotoren (2x) Steel
82607 83442 83387 OMS 100 81571
© 06/2016 altek GmbH19
Safety cap through drive pump
Pumps Mounting parts pump variation
Mounting parts pump variation
Mounti ng parts pump variati on
Arti cle-No. Type
81568 Safety cap through drive pump
81595 pto guard, D= 210 mm; L = 19 mm
83925 pto guard, D= 260 mm; L = 210 mm
81568 81595