programe haas

Download Programe Haas

Post on 30-Oct-2015

586 views

Category:

Documents

20 download

Embed Size (px)

DESCRIPTION

Programe Haas

TRANSCRIPT

%

%

O00001

(** MILL CLASS pgm 6/15/06 **)

(=================================)

O00002

(vv MILL WORKBOOK EXERCISES vv)

(=================================)

O01000

(vvvv WARMUP PROGRAMS 1000 vvv)

(=================================)

O01001

(5,000 Spindle warmup program)

(This program should be run prior)

(to machine use if machine has)

(been idle for more than 4 days.)

(Cycle time is 20-minutes.)

(This program can be used daily)

(for spindle warm-up prior to high)

(speed spindle use.)

(Set override at 100 percent for)

(5,000 rpm machines.)

(9-22-99)

(---------------------------------)

S250 M03

G04 P200.

S500 M03

G04 P200.

S1250 M03

G04 P200.

S2500 M03

G04 P200.

S3750 M03

G04 P200.

S5000 M03

G04 P200.

M30

(=================================)

O01002

(7,500 Spindle warmup program)

(This program should be run prior)

(to machine use if machine has)

(been idle for more than 4 days.)

(Cycle time is 20-minutes.)

(This program can be used daily)

(for spindle warm-up prior to high)

(speed spindle use.)

(Set override at 100 percent for)

(7,500 rpm machines.)

(9-22-99)

(---------------------------------)

S500 M03

G04 P200.

S1000 M03

G04 P200.

S2500 M03

G04 P200.

S5000 M03

G04 P200.

S7500 M03

G04 P200.

S10000 M03

G04 P200.

M30

(=================================)

O01003

(10,000 Spindle warmup program)

(This program should be run prior)

(to machine use if machine has)

(been idle for more than 4 days.)

(Cycle time is 20-minutes.)

(This program can be used daily)

(for spindle warm-up prior to high)

(speed spindle use.)

(Set override at 100 percent for)

(10,000 rpm machines.)

(9-22-99)

(---------------------------------)

(10,000 Spindle Warmup program)

S500 M03

G04 P200.

S1000 M03

G04 P200.

S2500 M03

G04 P200.

S5000 M03

G04 P200.

S7500 M03

G04 P200.

S10000 M03

G04 P200.

M30

(=================================)

O01004

(15,000 Spindle warmup program)

(This program should be run prior)

(to machine use if machine has)

(been idle for more than 4 days.)

(Cycle time is 20-minutes.)

(This program can be used daily)

(for spindle warm-up prior to high)

(speed spindle use.)

(Set override at 100 percent for)

(15,000 rpm machines.)

(9-22-99)

(---------------------------------)

(150 percent for)

(15,000 rpm machines.)

(9-22-99)

S750 M03

G04 P200.

S1500 M03

G04 P200.

S3750 M03

G04 P200.

S7500 M03

G04 P200.

S11250 M03

G04 P200.

S15000 M03

G04 P200.

M30

(=================================)

O01005

(30,000 Spindle warmup program)

(This program should be run prior)

(to any 30,000 spindles operating)

(above 10,000 rpm. This will help)

(revent possible overheating of)

(the spindle due to settling of)

(lubrication. This 20 minute)

(warmup program will bring the)

(spindle up to speed slowly and)

(allow the spindle to thermally)

(stabalize. This program should)

(be used daily for spindle warmup)

(prior to high speed use.)

(ES0352 REV.E10/03)

(---------------------------------)

(30K Spindle Warmup program)

(20 Minutes)

S1500 M03

G04 P200.

S3000 M03

G04 P200.

S7500 M03

G04 P200.

S15000 M03

G04 P200.

S22500 M03

G04 P200.

S30000 M03

G04 P200.

M30

(=================================)

O02000

(vv MISC. INFORMATION 2000 vvv)

(=================================)

O02001

(Program names listed here, in)

(the first two lines of a program)

(will show up next to the program)

(number in the LIST PROG. display)

(when entering text names between)

(parenthesis.)

(---------------------------------)

(Pressing SHIFT and then a letter)

(will output lower case text for)

(the letters beween parenthesis.)

(---------------------------------)

N1 (Operation information)

T1 M06 (Tool information...)

G90 G54 G00 X0.5 Y-0.5

(=================================)

O02002

(Setting 23)

(Turning setting 23 ON will hide)

(programs that are defined as)

(O9### numbers.)

(=================================)

O03000

(vvvv MISC. PROGRAMS 3000 vvvv)

(=================================)

O03001

(Misc. quick MDI commands)

(Text 10/18/02)

(vvvvvvvvv TEXT vvvvvvvvv)

(---------------------------------)

(=================================)

N1 (Spindle On S500)

S500 M03

G04 P100.

M30

N2 (Spindle On S2000)

S2000 M03

M30

N3

M80 (DOOR OPEN)

M30

N4

M81 (DOOR CLOSE)

G04 P1.

M00

N9

T9 (CHIP FAN)

(S8000 SPINDLE MAX.)

G90 G54 G00 X3. Y2.

G43 H09 Z-4. M08

G04 P1.

G03 I-1.5 F150. M09

G00 X4. Y2.

G04 P2.

S4000 M03

G03 I-2. F400.

G53 G01 X-10. Y-4.

G53 X-20.

G53 X0.

G53 Y-12.

G53 X-20.

G53 Y-4.

G53 X-10.

G00 Z0 M05

G53 G49 Y0 Z0

M30

(T)

(1/1/02)

(Setup 6 in. Vise with Step Jaws)

(Setup in Three Jaw Chuck)

(Setup in Fixture #)

(X0 Y0 Center of Part)

(X0 Y0 Lower Left Corner of Part)

(X0 Y0 on Part Diameter)

(---------------------------------)

(N1:T1= 3.0 x 5 flt. Shell Mill)

(N2:T2= 1/2 DIA. 2 flt. E.M.)

(N3:T3= 1/2 DIA. SPOT DRILL)

(N4:T4= 1/4 DIA. DRILL)

(N5:T5= 3/8 DIA. 2 fLT E.M.)

(N6:T6= #7 .201 DIA. STUB)

(N7:T7= 1/4-20 SPIRAL TAP)

(N8:T8= 1.0 DIA. 12 PITCH THD MILL)

(N9:T9= )

(N10:T10= )

(N11:T11= )

(N12:T12= )

(N13:T13= )

(N14:T14= )

(N15:T15= )

(N16:T16= )

(N17:T17= )

(N18:T18= )

(N19:T19= )

(N20:T20= )

(---------------------------------)

(T1 Dia. Comp. D1 = .5 DIA.)

(T2 Dia. Comp. D2 = .750 DIA.)

(T3 Dia. Comp. D3 = 1. DIA.)

(=================================)

O04000

(vv MISC. DEMO PROGRAMS 4000 v)

(=================================)

O04001

(Wrench Demo)

(24-01-97 TIME, Hr:Min - 13:59)

(T1-.101 DIA. DRILL)

(T2-3" DIA. FACEMILL)

(T3-.500 DIA. 2 FLT. E.M.)

(T4-.250 DIA. 2 FLT E.M.)

(T5-60 DEG. ENGRAVE/CHAMFER TOOL)

(---------------------------------)

(Local M97 Sub-Programs Used)

(M97 P2002)

(CALLS 2ND OP. MILL PROGRAM)

(M97 P2003)

(CALLS 2ND OP. POCKET PROGRAM)

(M97 P2004)

(CALLS 1ST & 2ND OP. CHAMFER PGM)

(---------------------------------)

(WORK OFFSET #54 UPPER RIGHT)

(CORNER OF PART.)

(WORK OFFSET #55 IS THE LARGE)

(DIAMETER THAT IS X5.831 FROM ZERO)

(IN X-AXIS. AND IS Y-.9157 FROM)

(ZERO IN Y-AXIS.)

(---------------------------------)

N10 G00 G40 G49 G80 G90

N20 G91 G28 Z0.

N30 G28 Y0.

N50 T1 M06

G187 E0.005

(.101 DIA. DRILL)

N60 G00 G90 G54 X1.0446 Y-0.5957 S2500 M03

N70 G43 H01 Z0.5 M08

N80 G98 G81 Z-0.4203 R0.1 F20.

N90 X1.3735 Y-0.9274

N100 X1.2507 Y-1.3782

N110 G80

N120 M05

N160 T2 M06

(3" DIA. FACEMILL)

N170 M01

N180 G00 G90 G54 X-1.7 Y0.5 S4500 M03

N190 G43 H02 Z0.2 M08

N200 G01 Z-0.01 F60.

N210 X8.7 F50.

N220 G00 Z0.2

N230 X-1.7 Y-0.7001

N240 G01 Z-0.01 F60.

N250 X8.7 F50.

N260 G00 Z0.5

(CALLS 2ND OP. MILL PROGRAM)

N270 M97 P2002

N280 G00 Z0.5

N310 T3 M06

(.500 DIA. 2 FLUTE ENDMILL)

N320 M01

N330 G00 G90 G54 X2.1123 Y0.3859 S5200 M03

N340 G43 H03 Z0.5

N350 G01 Z-0.39 F80.

N360 Y0.1433 F50.

N370 X5.7638 Y0.3387

N380 G02 X5.7626 Y-2.1701 I0.0672 J-1.2544

N390 G01 X2.0823 Y-1.9694

N400 G02 X0.5478 Y-2.2501 I-0.9364 J0.7846

N410 G01 X0.

N420 G00 Z0.5

N430 X1.7804 Y0.7097

N440 G01 Z-0.39 F80.

N450 X1.555 Y0.4099 F50.

N460 G03 X1.8748 Y-0.1899 I0.2998 J-0.2253

N470 G01 X5.781 Y0.0192

N480 G02 X5.78 Y-1.8506 I0.05 J-0.9349

N490 G01 X2.0249 Y-1.6458

N500 G03 X1.8852 Y-1.701 I0.0061 J-0.2199

N510 G02 X0.7063 Y-1.9721 I-0.7393 J0.5162

N520 X0.6239 Y-1.9022 I0