presentation nastar.ppt
TRANSCRIPT
Huawei GENEX SeriesHuawei GENEX Series
System Structure of GENEX Nastar GSM
Module Description
TransData ( An import
module)
This module is used to import data and it has the following
functions:•Browsing the results of the traffic statistic register•Displaying the information of the current database•Backdating the information of the current traffic statistic task
Nastar (The main module) This module is the access end of Nastar and it has the
following functions:•Querying the customized traffic statistic tasks•Displaying the traffic statistic query results directly•Analyzing the RNO topics
NaConvert (An collection
module)With this module, you can obtain the traffic statistic data from
BAM and upload the data to the server of Nastar.
The structure of GENEX Nastar GSM
Local network mode: Offline mode:
In this mode, it is not required to install a database. In this mode, you can only analyze neighbors and frequencies, but you cannot analyze the traffic statistic.
Online mode:In this mode, it is not required to install a database. In this mode, you can analyze the traffic statistic, neighbors, and frequencies. This mode, however, cannot provide such functions as intelligent reports and performance alarms in the version of server. In addition, it can only analyze the networks in a restricted size.
Customer/Server mode
Installation of the Data Collection Module
Installation of IISControl Panel —— Add/Delete a Component —— Install IIS (Install FTP Service)
Set FTP
Install Naconvert
Install IIS
Installation of the Data Collection Module
FTP SettingControl Panel - Management Tools - Information Service - FTP Site Creation
Installation of the Data Collection Module
FTP User SettingMy Computer — Computer Management — Local Users and Groups —Users
Installation of the Data Collection Module Installation of NaconvertCopy Naconvert.exe and five DLLs (ziparch.dll, SHLWAPI.dll, MFC42.DLL, MSVCRT.DLL, and MSVCIRT.DLL) to \\OMC\BSC\BAM
Copy Naconvert.ini to \\OMC\BSC\public\initfile
Setting of the configuration files
°ü
Installation of Nastar GSM Installation of Nastar Client
Installation of Nastar GSM Installation of GENEX Shared
Installation of SQL Server
The required version: SQL Server Standard+sp3
Setting of SQL ServerStep1: Set the services
Step2: Set Autostart
Step3: Set the connection property
Introduction to the data source
Project parametersThese parameters must contain the parameters: Cell Name, BTS Longitude, BTS
Altitude, LAC, CI, and Directional Angle
Configuration parametersThese parameters must contain the configuration data of the cell. They are saved
in BAM and the path is: \BSC\BAM\dbf
Traffic statistic dataThese parameters are the basis of the performance analysis. They are saved in
BAM and the path is: \BSC\BAM\appsvr\stats\data
Project Par.
Introduction to the Software Interface
Site adding
Site information edition
Site deletion Cell deletion
Cell query
Co-BCCH Co-BSIC check
Idle frequency point check
Spectrum utilization analysis
Frequency point check – according to the frequency
point
Frequency point check – according to the cell
Neighbor analysis
Site view window
Attribute view window
Working area
Step5:Set Project configuration information
Project Management
Create a project
Step4:Add Project Name
Step3 : Click Add
Step1: Star Nastar Step2:Click Setting
Project Management Open a project
Step2: Choose the new project
Step3: Click OK
Step1: Choose Project->Open Project
Project Management
Set a project
Delete the project
Set the map
Project setting
Step4:Authority setting
Step3:Right click User -> Authority Setting
Step2:Right Click -> Add a User
User Management User authority management
Step1:Project->User Management
Step4 : Import configuration data
Step5 : Import traffic statistic data
Step3 : Import data dynamically
Step2 : Create a BSC
Data ManagementData import — import of configuration
parameters and traffic statistic data
Step1 : Create a network
Data Management Data import — Project parameter import
The following parameters must match each other:
Cell Name, LAC, CI, BTS Longitude, BTS Altitude, and Antenna Directional Angel
Data Management Data Export
Select the data sources to be exported
Select the parameters to be exported
RNO AnalysisSt
art N
asta
r
Crea
te P
roje
ct
Impo
rt P
roje
ct D
ata
Import Configuration Data
Import Statistic Data
Import Project Parameter
Net
wor
k O
ptim
ize
Anal
ysis
Configuration Par. Check
Neighbors Analysis
Network Trend Analysis
Frequency Analysis
Network Monitor
Trouble Shooting
Anal
ysis
Rep
ort
The analysis flow of Nastar GSM RNO
Step3:Select the check parameters
Check of Configuration Parameters
Step2:Select the check objects
Step1:Analysis->RNP Check
Step3:Select the cells
Frequency AnalysisCo-channel and adjacent channel check –
check according to the cell
Step1:Frequency Analysis->Co-fre. Adj-fre. Check
Step2:Select the check options
Step3 : Set the frequency points to be checked
Frequency AnalysisCo-channel and adjacent channel check –
check according to the frequency pointStep1:Frequency Analysis->Co-fre. Adj-fre. Check
Step2 : Set of the frequency arrange
Step3:Display the check results
Frequency Analysis Co-BCCH Co-BSIC check
Step1 : Frequency Analysis->Co-BCCH Co-BSIC Check
Step2:Set the check conditions
Step4:Display the analysis results
Step3:Set the analysis conditions
Frequency Analysis Idle frequency point check
Step1:Frequency analysis->Idle ARFCNs
Step2: Select the analysis area
Step3:Display the analysis results
Frequency Analysis Spectrum utilization analysis
Step1:Frequency analysis->Spectrum Utilization
Step2:Set the analysis conditions
Step3:Select the analysis objects
Frequency Analysis Frequency optimization
Step1:Frequency analysis->Check Frequency Optimization
Step2:Set the analysis conditions
Neighbor Analysis Neighbor query
Neighbor maintenance
Step1:Neighbor analysis-> Neighbors
Step2:Select the original cells to be queried
Step1:Display the neighbors
Step2:Modify the neighbors
Step3:Save the modified results
Step3:Display the check results
Neighbor Analysis Neighbor checkCheck unidirectional neighbors and cells with fewer neighbors in the whole network
Step1:Neighbors Analysis->Check Unidirectional Neighbors
Step2:Display the query results in a list
Step3:Display the query results geographical
Step1:Neighbors Analysis->Check cells with fewer neighbors
Step2:Set the number of the neighbors
Step5:Export the planning results
Neighbor Analysis Automatic neighbor planning
Step4:Set the attribute
Step2:Set the antenna information
Step3:Set the geographical type of the planning area
Step1:Neighbors Analysis-> Neighbor Autoplaning
Step5:Select the monitor indicators
Step6:Edit the monitor conditions
Step2:Set the monitor time
Step3:Select the monitor objects
Step4:Set the alarm conditions
Network Performance Monitoring Performance indicator alarm
Step1:Right click to select the alarm indicators
Step5:Set the monitor objects
Step3:Set the monitor conditions
Step4:Select the monitor objects
Step2: Select the template
Network Performance Monitoring
Custom performance monitor indicators
Step1:Custom Alarm->New Alarm Task
Network Performance Monitoring
Introduction to performance monitoring reports Network performance monitoring report - TL
Count the network performance indicators and analyze the trend of the network performance within a week
Network monitoring report - EngineerCount the TOP 10 cells in the network KPI indicator, accessability, mobility, retainability, and network resource utilization and analyze the traffic statistic in detail, thus realizing a deep location of the network problems
Network performance monitoring report – Compare Report
Compare and analyze the network KPI indicators of two weeks, thus realizing the performance indicator monitoring after the network optimization
Network Performance MonitoringPerformance monitoring reports
Step1:Select the analysis objects
Step2:Select the report type
Step3:Set the analysis time segment
Step5:Set the query time
Step4: Define the VIC area
Step7:Count and set the worst cells
Step6:Set the drawing indicators
Step5:Set the indicator thresholds
Step4:Set the TOPN capacity indicators
Network Performance Monitoring Customized monitoring reports
Step3:Count and set the capacity indicators
Step2:Set the report type
Step1:Peformance Analysis->Report wizard
Deep Location of Network Problems
Topics of the deep location of
network problems Analysis of the performance KPI
indicators
Query cell/BSC–level KPI indicators,
analyze the trend of KPI indicators,
analyze the TOPN cells, and filter the
cells
Analysis of the access performance
Deep location of access performance
problems
Analysis of the retainability
performance
Analyze SDCCH/TCH call drops
Analysis of the mobility performance
Deep location of handover problems
Analysis of the TRX performance
Analysis of TRX measurement reports
Step3:Set the analysis objects
Step2:Set the statistic time segment
Step1:Double click Task
Deep Location of Network Problems
Implementation of the topic tasks
Step2:Set the report name
Step3:Set the statistic time and type
Step4:Set the busy hour and statistic type
Step5:Set the statistic objects
Step6:Set the statistic indicators
Analysis of the Traffic Statistic Enhanced traffic statistic
Step1:Performance Analysis->Traffic Statistic
Step2:Set the analysis arrange
Step3:Select the statistic objects
Analysis of the Network Resources Statistic of the network resources
Step1:Project->Resource Stat.
Step3:Set the analysis objects
Step2:Set the parameters
Analysis of the Network Resources
Optimization of the network resources
Step1:Performance Analysis->WRO Report