?g>6b ?7 2cc6dc 7?b=6b 65 3i chrysler llc

Hilco Industrial, LLC & Maynards Industries

WebCast/OnsIte auCtIOnOld Carco Liquidation Trustowner of assets formerly owned by

Chrysler LLC

A u c t i o n e e r s • L i q u i d a t o r s • A p p r a i s e r s

31555 West Fourteen Mile Road, Suite 207Farmington Hills, Michigan 48334

Ph 877.37.HILCO (44526) • Fx 248.254.9995

Hilco Industrial, LLC

www.hilcoind.com

21700 Northwestern Hwy • Suite 1180Southfield, Michigan 48075-4923

Ph 248.569.9781 • Fx 248.569.9793

www.maynards.com

Auctioneers • LiquidAtors • ApprAisers

to schedule an auction, please call Hilco Industrial, LLC at 1.877.37.HILCO (44526)2

HILCO InDustrIaL, LLC WebCast/OnsIte auCtIOnDIreCtIOnsfrOM DetrOIt MetrOPOLItan aIrPOrt: exIt aIrPOrt by HeaDIng sOutHWestanD COntInue straIgHt OntO JOHn D DIngeLL Dr. gO 1.3 MILes anD COntInue OntO W g rOgeLL Dr. Merge OntO I-94 e vIa tHe raMP tO DetrOIt. PrOCeeD fOr 20.3 MILesanD take exIt 218 tOWarD M-53/van Dyke ave. Merge OntO eDseL fOrD e. turn LeftOntO van Dyke ave anD gO 1.4 MILes anD turn Left OntO LynCH rD. DestInatIOnWILL be On tHe Left. WatCH fOr auCtIOn sIgns anD ParkIng.

furtHer InfOrMatIOn• a buyers PreMIuM Of 13.5% fOr aLL OnsIte saLes & 16% fOr aLL WebCast saLes WILL be In effeCt.

auCtIOn WILL be COnDuCteD In engLIsH, aCCePtIng u.s. CurrenCy OnLy.

• bIDDers IntenDIng On attenDIng In PersOn Must regIster On sIte befOre tHe auCtIOn.

• Removal foR hand caRRy / small items not RequiRing heavy Rigging equipment & disassembly willoccuR on June 24 & June 27 tHru July 1, 2011. Removal foR laRgeR items RequiRing heavy Riggingequipment & disassembly begins July 5, 2011. the Removal deadline foR all equipment is Friday,august 26, 2011, standaRd Removal times 8am to 4pm monday thRu fRiday. afteR the noteddeadline at 4pm the equipment will be deemed abandoned and payment will not be Refunded.

• RiggeR of choice pRovided that pRopeR pRoof of insuRance and safety RequiRements aRe met and subject to detailed site cleaRance pRoceduRes.

• fOr furtHer InfOrMatIOn On MaCHInery & equIPMent, PLease COntaCt ken PLanet at 248.254.9999 x33 Or eMaIL [email protected]

• fOr PayMents PLease COntaCt LesIa JOsePH at 616.732.1800 x19 Or eMaIL [email protected] HILCO aCCOunts reCeIveabLe at [email protected]

• CustOMer servICe, PLease COntaCt sanDI neeLy at 248.254.9999 x16 Or [email protected]

auCtIOn Dates

tuesDay, June 21st tHrOugHtHursDay, June 23rD

at 10aM LOCaL tIMe eaCH Day

PrevIeW Date

MOnDay, June 20tH

9aM tO 4PM LOCaL & MOrnIng Of saLeFor earlier inspection, please contact ken planet at 248.254.9999 x33 or email [email protected]

auCtIOn & PrevIeW LOCatIOn6700 LynCH rOaDDetrOIt, MI 48234

2005

2003

2003

(45) CNC GEAR CUTTING MACHINES1 – KLINGELNBERG MODEL C27 CNC GEAR CUTTING MACHINES, S/N 291664 (2005),

Fanuc 160i-MB Control, Max Gear Diameter 10.63”, Module Range .059” – .256”, PneumaticHoist, Parts Conveyor, S/N 291665 with Spiess Jib Crane

4 – GLEASON MODEL PHOENIX II 275HC CNC HYPOID CUTTING MACHINES, S/Ns 963815,963817, 963814, 963816 (All 2003), GE Fanuc 160i-MB Control, Full Depth Max .787”, Face Width Max 2.3”, Extreme Ratio 10:1, Root Angle Range -5 to 90 deg, Coolant System,Mist Collector

38 – GLEASON MODEL PHOENIX 175HC CNC HYPOID CUTTING MACHINES, (NEW AS 2001), S/Ns 948302, 945303, 945307, 945308, 945309, 946010, 945306,946009, 945310, 937407, 936203, 937406, 936206, 936202, 928404, 930703, 928405, 925111,926810, 926812, 926811, 922711, 924002, 926809, 921416, (13) NA, GE Fanuc 160i-M Control, Face Width Max 1.6”, Extreme Ratio 10:1, Root Angle Range (B-Axis) -5 degto 90 deg, Coolant System, Mist Collector, Machine #5, Pneumatic Hoist, Parts Conveyor

CNC GEAR CHAMFERING MACHINE1 – GLEASON MODEL GTR 250 VG CNC GEAR CHAMFERING

MACHINE, S/N GTR292 (2000), Built by Okamoto – Unused/ On OEM Factory Skid (Missing Controls)

MISC GEAR CUTTING EQUIPMENTOver 200 – CUTTER BODIES

1 – GLEASON 5-AXIS CUTTER BUILD UP DEVICE, S/N 930301 (1998), Diameter 3.25” – 18” Face Milling,Spindle Nose Taper 2.92”, C&Z Axis Servo Driven

3 – GLEASON EDGE CONDITIONERS, S/Ns N/A, AercologyModel DMH 500 Dust Collector

QUANTITY OF GEAR ARBORS, PINION ARBORS, FACE PLATES

Old Carco Liquidation Trustowner of assets formerly owned by

Chrysler LLC

to schedule an auction, please call Maynards Industries at 248.569.9781 3

CnC gear testIng & LaPPIng MaCHInes

20042002

2002

(37) CNC GEAR LAPPING MACHINES6 – GLEASON MODEL 600 HTL TURBO CNC HYPOID

TURBO GEAR LAPPERS, S/Ns 966701, 966702 966703,966705, 966710, 966704 (All 2004), Fanuc 160i-MBControl, Max Gear OD 23.63”, Max Pinion OD 10”, MaxSpeed 3,000 RPM, Offset Range +/- 3”, DLB Pump Station

5 – KLINGELNBERG / OERLIKON MODEL L60 CNC GEARLAPPERS, S/N 293440 (2005), S/Ns 292480, 292479,292477, 292478 (All 2002), GE Fanuc 160i-M Control,Max Gear Diameter 19.68” Approx, Motor & Brodel Pump

2 – LIEBHERR MODEL LP200 LX GANTRYLOAD/UNLOAD UNITS, GE Fanuc PowerMate Control,Gantry Length 35’ Approx

8 – OERLIKON MODEL L50 CNC GEAR LAPPERS, S/Ns 292407, 292409, 292405, 292404, 292420, 292421,292424, 292423 (All 2000), N/A, with GE Fanuc 160i-MControl, Compound Pump

6 – OERLIKON MODEL L50 CNC GEAR LAPPERS,S/Ns 289441R, 291466, 291472, 291471, 291459,291460 (All 1998), Fanuc 16-M Control, CompoundPump, (4) with Parts Conveyor

12– OERLIKON MODEL L22 CNC GEAR LAPPERS, S/Ns 291434, 291437, 291433, 291441, 291438 (All 1997),S/Ns 291410, 291411, 291401, 289494, 291405, 291404,291403 (All 1996), Fanuc 16-M Control, Compound Pump

COMPOUND PUMP SYSTEMS2 – DAVID L BOWERS THREE TOTE STORAGE &

PUMPING SYSTEMS (Both 2006), Magelis Terminal, (1) with Motor & Bredel Pump

1 – LAP COMPOUND PUMPING SYSTEM, Magelis Control,7.5 HP Motor, Bredel Pump

(18) CNC GEAR TESTING MACHINES2 – GLEASON MODEL 600 HTT TURBO CNC HYPOID GEAR TESTERS, S/Ns 966806, 966801 (Both 2004),

Fanuc 160i-M Control, Max Gear OD 23.63”, Max Pinion OD 10”, Max Speed 3,000 RPM, Offset Range +/- 3”,Koolant Model JT1000GLE Chiller

3 – OERLIKON/KLINGELNBERG MODEL T60 CNC GEAR TESTERS, S/Ns 292510, 292511 (Both 2002),S/N 292538 (2005), Fanuc 160i M Control, Max Gear Diameter 19.69”, Speed Range 0-5000 U/Min

9 – OERLIKON/KLINGELNBERG MODEL T50 CNC GEAR TESTERS, (NEW AS 2001), S/Ns 291540, 291526,291511, 291504, 289584, 289576, 289577, 289555, 289583,Fanuc 160i M Control, Max Gear Diameter 19.69”,Pinion Headstock (Z-Axis) 7.88”, Gear Headstock (Y-Axis) 7.88”, Hypoid Shift (X-Axis) +/- 2.76”, Shaft Angle 90Degrees, S/Ns 291540 & 291511 with Rotec Computer & Monitor, S/N 291540 with Compound Spray System

3 – OERLIKON MODEL T22 CNC GEAR TESTERS, S/Ns 289569, 289551, 289552 (1998), Fanuc Control, Max Gear Diameter 19.69”, Pinion Headstock (Z-Axis) 7.88”, Gear Headstock (Y-Axis) 7.88” Hypoid Shift (X-Axis) +/- 2.76”, Shaft Angle 90 Degrees, S/N 289552 Rotec Computer & Monitor, Compound Spray Pump,S/N 289551 with Compound Spray Pump

1 – OERLIKON MODEL SPIROMAT T22 CNC GEAR TESTER, S/N 289553 (1997), Fanuc Control, Max GearDiameter 19.69”

1 – GLEASON MAHR MODEL GMX 275 GEAR TESTER, S/N 1102, Best Nr 5441103, Max OD 10.83”

1 – GLEASON MODEL 17A GEAR TESTER, S/N 32437 (2002)

1 – GLEASON ARBOR CHECKING FIXTURE, S/N 957501

1 – GLEASON MODEL 15 BEVEL GEAR BLANK CHECKER, S/N 637804, Face Angle/Back Angle Adjustment

3 – GLEASON MODEL 502 HYPOID TESTERS, S/Ns 652402, 641612, 634817

CnC gear MaCHInery • eDM • autOMatIC straIgHtenIng Presses

for more information, please visit us on the web at www.hilcoind.com4

2005

2005

2002

(3) CNC GEAR MEASURING CENTERS1 – KLINGELNBERG MODEL P40 CNC GEAR MEASURING

CENTER, S/N B5484 (2005), Module Range .02” – .59”, MaxGear OD 15.75”, Vertical Measuring Range 21.66”, Min/MaxHelix or Lead Angle 90 Degrees, Center Distance .59” – 31.5”,Dell PC, HP Printer, Monitor

2 – KLINGELNBERG MODEL P26 CNC GEAR MEASURINGCENTERS, S/Ns B5772, B5773 (Both 2005), Module Range.02” – .48”, Max Gear OD 10.24”, Vertical Measuring Range15.75”, Min/Max Helix or Lead Angle 90 Degrees, CenterDistance .59” – 23.63”, Computer & Printer

CNC CUTTER SHARPENING MACHINES9 – GLEASON MODEL 300-CG 5-AXIS CNC CUTTER SHARPENING

MACHINES, (NEW AS 1999), S/Ns 948202, 948201, 933101,933001, 931801, 931701, 925701, 920301, 914401, FanucControl, Travels: A – 360 Deg Rollover, C – +30 / – 180Degrees; X – 12”, Y – 12”, Z – 12”; Grinding Wheel Capacity12”, 10 HP Grinding Spindle, Spindle Speeds 2,000 – 4,000RPM, Auto Stacker & Shuttle, Fanuc Robot Loaders

CNC GRINDERS / FACE MILLS1 – LANDIS MODEL 3SEH CNC 30 DEGREE CNC ANGLE

GRINDER, S/N LT-90872 (2002), GE Fanuc Series 18i-TControl, Model SB-4500 SBS Balance Sys Monitor, ControlGaging 902 Monitor, Gantry Load Arm, Turmoil Model OC-300Cooler, Chip Conveyor, Monroe Environmental Oil MistCollector

1 – SAGINAW MACHINE MODEL 1-25G CHALLENGER CNCVERTICAL FACE GRINDER, S/N 79384-07/03, GE FanucSeries 180iT Control, Turmoil Model CCO-200 R-2CIR Cooler,Monroe Environmental Oil Mist Collector, Mayfran Coolant Pump

1 – SAGINAW MACHINE MODEL HDE 8x4 CNC FACE & CENTER MILL, S/N 79374, GE Fanuc 180i-T Control, DualCutter Heads, Chip Conveyor, Creative Automation GantryLoader, Monroe Environmental OMC-007-01

CNC TOOL & CUTTER GRINDERS1 – STAR MODEL ATG-6AC CNC TOOL & CUTTER GRINDER,

S/N 2987

EDM1 – MITSUBISHI MODEL FA10SM WIRE EDM, S/N 0501S206

(2005), Machining Range: X – 13.8”, Y – 9.8”; Max Z-Axis Height8.6”, Max Submerged Workpiece Dimensions 31.5” x 23.6” x 8.5”,

AUTOMATIC STRAIGHTENING PRESSES5 – EITEL MODEL ASP40 40 TON AUTOMATIC FLEX

STRAIGHTENING PRESSES, Xycom Terminal, AutoLoad/Unload, S/N 25819R (1997, Retooled 2004), QASS.NetCrack Detector, S/N 25955 (2001), Wolter Crack Detector,Allen Bradley 1394 Digital Servo Controller, Hydraulic UnitDisassembled, S/N 25817, 25818, 25819 (All 1997), WolterCrack Detector – Console Control w/Allen Bradley 550Panelview, Auto Load/Unload

1 – EITEL MODEL AMS-40-1300 40 TON AUTOMATIC ELECTROMECHANICAL STRAIGHTENING PRESS, S/N26002 (2002), Xycom Terminal, Between Columns 35”,QASS.Net Crack Detection Sensor

CnC vertICaL turnIng Centers • CnC MaCHInIng Centers

for more information, please visit us on the web at www.maynards.com 5

(21) CNC VERTICAL TURNING CENTERS2 – SAGINAW MACHINE MODEL AC-300-1 CNC VERTICAL TURNING

CENTERS, S/Ns 79376, 79375-06/03 (Both 2003), GE Fanuc 180i-T Control,Max Swing 16”, Max Turn Diameter 16”, Max Turn Height 14”, 12 PositionTurret, Chip Conveyor

1 – CREATIVE AUTOMATION OVERHEAD CONVEYOR, S/N 79380, GE FanucPowermate Control, Overhead Loader/Unloader

4 – KASPER MACHINE CO MODEL VCNC-400 4-AXIS CNC TWIN SPINDLEVERTICAL TURNING CENTERS, S/Ns VCNC-402M0079, VCNC-402M0185,VCNC-402M0077, VCNC402M0078, GE Fanuc Series 16i-T Control, MaxSwing 27” Approx, Spindle Center Distance 34” Approx, Slides: Vertical (Z)Travel 18”, Cross Slide (X) Travel 12”, Chip Conveyor, Motor & HydraulicPower Unit, S/Ns VCNC-402M0079, VCNC-402M0185 with Dual Motor &Hydraulic Power Unit

8 – KASPER MACHINE CO MODEL VCNC-400 4-AXIS CNC TWIN SPINDLEVERTICAL TURNING CENTERS, S/Ns VCNC-402M9650, VCNC-N/A,VCNC402M9003, VCNC402M9302, VCNC402M9752, VCNC402GM9761,VCNC402M9866, VCNC402M9866, GE Fanuc Series 16-TT Control, Max Swing27” Approx, Spindle Center Distance 34” Approx, Slides: Vertical (Z) Travel 18”,Cross Slide (X) Travel 12”, Chip Conveyor, Motor & Hydraulic Power Unit

2 – KASPER MACHINE CO MODEL VCNC-300 4-AXIS CNC TWIN SPINDLEVERTICAL TURNING CENTERS, S/Ns VCNC-300L-U0108, VCNC-300L-U0109,GE Fanuc 18i-T Control

1 – MONROE ENVIRONMENTAL CORP MODEL CMC-010-1 OIL MIST COLLECTOR, S/N 02-4016-1; Chip Conveyor

4 – KASPER MACHINE CO MODEL DS-250 2-AXIS CNC VERTICAL TURNINGCENTERS, S/Ns DS-250-UAGM0206, DS-250-UAGM0207, DS-250-UA0208,N/A (All 2003), GE Fanuc 18i-T Control, 10 Position Turret, Chip Conveyor, ProMetec OPM 14 Process Marking Control, Monroe Enviro Mist Collector, ChipConveyor, Turmoil Chiller

1 – KASPER MACHINE CO MODEL VCNC-400 2-AXIS CNC SINGLE SPINDLEVERTICAL TURNING CENTER, S/N VCNC401T9419, Fanuc Control, MaxSwing 27” Approx, Spindle Center Distance 34” Approx, Livonia MagneticsChip Conveyor, Motor & Hydraulic Power Unit

CNC HORIZONTAL MACHINING CENTERS2 – TOYODA MODEL FA 630 CNC HORIZONTAL MACHINING CENTERS, S/Ns NM9240, NM9239

(Both 2001), Fanuc 16i-M Control, Travels: X – 39.37”, Y – 33.48”, Z – 29.52”; Pallets 24.8” x 24.8”, SpindleNose to Rotary Table Center 6.9” – 36.4”, 50 Taper

CNC HORIZONTAL DRILLING & TAPPING CENTERS3 – BROTHER MODEL TC-731S CNC HORIZONTAL DRILLING & TAPPING CENTERS, (NEW AS 2000),

S/Ns 111266, 111131, 111113, CNC 840 Control, Travels: X – 19.7”, Y – 15.7”, Z – 15.7”; 12 Position ATC– 40 Taper, Spindle 8,000 RPM Max, Tsudakoma Model CT-405 Rotary Table, Chip Conveyor,

(11) CNC VERTICAL MACHINING CENTERS8 – CHIRON MODEL FZ12S CNC HIGH SPEED VERTICAL MACHINING CENTER, (NEW AS 2000),

S/Ns 153-08, 153-09, 424-12, 424-13, 423-81, 423-82, 447-91 & 447-92, GE Fanuc Control, Travels: X – 21.66”, Y – 11.82”, Z – 14.18”, Knoll Chip Conveyor, (3) with Peiseler Type ZA-5-200 Rotary Table

2 – BROTHER MODEL TC-324 CNC VERTICAL MACHINING CENTERS, (NEW AS 1997), S/Ns 111767,112179, CNC 830 Control, Travels: X – 16.5”, Y – 12.6”“, Z – 10.2”; 14 Position ATC – 30 Taper, Dual Tables12” x 19.5”, Chip Conveyor

1 – CHIRON MODEL FZ15S CNC VERTICAL MACHINING CENTER, S/N NA (2004), Fanuc 18i Controls

2005

sPLIne rOLLers • CnC HOrIzOntaL turnIng Centers • CnC tube sWagers


2006

2006

SPLINE ROLLERS2 – ANDERSON COOK MODEL 340S 24” SPLINE ROLLERS, S/Ns 564, 502, Magelis Terminal,

Walking Beam, 25 HP Motor & Hydraulic Unit, Overarm

1 – ANDERSON COOK / MICH DIV REBUILD MODEL 3237 ROTO FLOW 24” SPLINEROLLER, S/Ns 4520, 4521, Walking Beam, 20 HP Motor & Hydraulic Unit, Overarm

1 – ANDERSON COOK MARAND MODEL 340S SPLINE ROLLER, S/N 564 (2003), EquippedWith Magelis Controls

QUANTITY OF SPLINE ROLLER TOOLING

(33) CNC HORIZONTAL TURNING CENTERS4 – FUJI MODEL ANS-31P 2-AXIS CNC TURNING CENTER, (NEW AS 2006), S/Ns 15534,

14615, 14614, 15533, Fanuc 18i-T Control, Spindle Speeds 750 – 4000 RPM, Marposs P5Monitor, Fuji Auto Loader, S/N 15534 with Chip Conveyor

22 – OKUMA MODEL LU-15 IMPACT 4-AXIS CNC TURNING CENTERS, (NEW AS 2000), S/Ns 1211.2013, 1211.2016, 1211.2010, 1211.2012, 1008.1323, 1008.1322, 1109.1668, 1108.1641,1008.1315, N/A, All above with OSP-U100L Control, S/N 0706.0335, OSP Control, S/Ns 0909.1015(1997), 0811.0799, 1001.1123, 0909.1019, With OSP-7000L Control, S/Ns 0706.0332, 1706.0336,0706.0338, With OSP-7000 Control, S/Ns 1210.1982, 1109.1683, 1008.1301, 1008.1317, With OSP-U100L Control, All with Swing Over Bed 20.87”, Center Distance 23.62”, Max Turning Diameter14.17”, 12 Position (Upper) & 8 Position (Lower) Turrets, Programmable Tail Stock, (10) with ToritModel DMC-C Mist Collector, (2) with Hennig Chip Conveyor

4 – OKUMA MODEL LC-20 1SC 2-AXIS CNC TURNING CENTERS, S/Ns 3955, 3957, 3956,3292, OSP 5000L-G Control, Swing Over Bed 15.75”, Max Turning Diameter 10.24”, 12 Position Turret, Programmable Tail Stock

1 – OKUMA MODEL LR-15 4-AXIS CNC TURNING CENTER, S/N 0408.2003, OSP 5000L-G Control,Swing Over Bed 17.72”, Max Turning Diameter 23.62”, 10 Position (Upper) & 8 Position (Lower) Turrets

2 – OKUMA MODEL LB-15 2-AXIS CNC TURNING CENTERS, S/Ns 3291, 6109.3890, OSP Control, 12 Position Turret

IFS CARRIER LINE(NOTE: Nachi Robots May be Offered Separately)1 – IFS CARRIER LINE Including: Square D Model 6 Motor Control Center – No R-688534, Conveyor

System, Pinion Cup Press, Axle Tube Inserters, Force Distance Monitors, Artuna Washer, Motors &Hydraulic Units, Rotators, ABB Airleak Stations, Uson Series 4000 Testers, Overhead Cranes &Pneumatic Lifts, Trio Tool Stations, Barrel Pumps

1 – NACHI MODEL SH166 HEAVY DUTY 6-AXIS CNC ROBOT, Controller Type AX, Hours 25,651

8 – NACHI MODEL SA160F 6-AXIS CNC ROBOTS (To 1998), Controller Types AR52 & AR, Teach Pendant

3 – NACHI MODEL SA130F 6-AXIS CNC ROBOTS (1998), Controller Type AR52, Teach Pendant

CNC TUBE SWAGER & TUBE TRANSFER LINE1 – TORRINGTON MODEL AMSFM-40-013 CNC 4-STATION TUBE SWAGER, S/N 52069390-F-2

(1999), Tube Length 34”, Auto Feed Conveyor, Max Opening 33.63”; Forming Units & Transition Unit,Left Side Stroke 21”, Right Side Stroke 7”, Square D Model 6 Motor Control Center, Large Qty SwagerDies, (4) Dual 60 HP Motors & Hyd Pumps

1 – NEWCOR UTICA TUBE MACHINING TRANSFER LINE, Dual Drive & Tri-Way Drill Units, MagnetekGPD515 Drives & Yaskawa GPD 515/65 Drives, Indramat Drives & SOT Controls, Handling & DrillingStations, Allen Bradley Transfer Conveyors, Tarpon Gantry Loaders

InsPeCtIOn equIPMent • Lab equIPMent


2 – ZEISS MODEL PRISMO 9/12/7 HTG BRIDGE TYPECOORDINATE MEASURING MACHINES, S/Ns 100919, 102004, Measuring Ranges: X – 35.4”, Y – 46.5”, Z – 25.6”; Controller; Zeiss Pendant; S/N 100919: High Temperature Gradient Version, MultiProbe Head

2 – ZEISS MODEL PRISMO BRIDGE TYPE COORDINATEMEASURING MACHINES, S/Ns 115188, 115038,Measuring Ranges: X – 47”, Y – 118”, Z – 39”, ZeissPendant, Probe

1 – ZEISS MODEL DCC DB 4880-36 BRIDGE TYPECOORDINATE MEASURING MACHINE, S/N Y49935(1993), PH9C MK2 Probe Head Control Unit, RenishawModel PH9A Probe, Pendant

1 – ZEISS MODEL UMM 550 BRIDGE TYPE COORDINATEMEASURING MACHINE, S/N 88378, MeasuringRanges: X –19.68", Y – 47.24", Z – 15.75"; Controller S/N87314, Computer/Monitor/Printer, BT 000261427 (S-12)

1 – ZEISS MODEL RONDCOM 60A ROUNDNESS &CYLINDRICAL PROFILE MEASURING MACHINE,S/N MA6503AV (2001), Max Diameter 16.53”,Measuring Height 27.56” OD Max / 19.68” ID Max; BT AAA101087

1 – CORDAX MODEL 1808 COORDINATE MEASURINGMACHINE, S/N N/A, Granite Plate 26” x 31.5”,Renishaw MIH Probe

1 – OPTICAL GAGING PRODUCTS SMARTSCOPEFLASH MEASURING SYSTEM

1 – STARRETT SIGMA MODEL HCS800 31.5” OPTICALCOMPARATOR, S/N 0020, Lens Selection Control,Quadra Chek Computer

1 – STARRETT SIGMA MODEL MA350 14” OPTICALCOMPARATOR, S/N 1768 (2000), Quadra Chek 2000

1 – TAYLOR HOBSON PNEUMO SURFTRONIC 3+ROUGHNESS TESTER (Loc Gage Room)

1 – STURTEVANT RICHMONT MODEL ML-1000 DIGITALTORQUE TESTER, S/N 1064, Part No 10167, Capacity1,000 Ft/Lbs

1 – FEDERAL ELECTRONIC DIGITAL HEIGHT INDICATOR

1 – DYNAMIC MICROSCOPE W/ROI ILLUMINATOR

2 – WILSON ROCKWELL SERIES 2000 / MODEL 2002TTESTING INDENTORS, S/N C2132, C2137, Instron Pendant

1 – WILSON TUKON SERIES 200 HARDNESS TESTER,S/N 902320

1 – WILSON ROCKWELL SERIES 500 HARDNESSTESTER, S/N 94056102

1 – WILSON BRINELL HARDNESS TESTER, S/N 93487-Z/94,BT 00302076

1 – ROCKWELL MODEL 5 DR RB HARDNESS TESTER

1 – BROWN & SHARPE MODEL MICRO HITE 900HEIGHT GAUGE, S/N 8C 0099 11

1 – STARRETT 18” DIGI CHECK HEIGHT GAUGE, S/N 12805, Catalog No 258

1 – OLYMPUS MODEL SZX-FOF RESEARCH MICROSCOPE SYSTEM, S/N 2H26471, Video

1 – OLYMPUS MODEL PMG3 INVERTED MICROSCOPE,S/N 2G0394, PC, Monitor

1 – NEW AGE MODEL MT90 PRODUCTION MICROHARDNESSTESTER, DRO, Newport Model ESP300 UniversalMotion Controller/Driver

1 – FW BELL MODEL 5060 TESLAMETER

1 – ZEISS ICM405 INVERTED MICROSCOPE, S/N 097824

1 – STARRETT PINK GRANITE PLATE, 36” x 36”

1 – BLACK GRANITE PLATE, 60” x 120”

QUANTITY OF ROI MODEL 150 ILLUMINATORS

QUANTITY OF BUEHLER CAT 49-1885-160 ECOMET 6 DUAL STATION METAL POLISHERS

Gauge Block Sets,Ring Gauge Sets, Mitutoyo & StarrettCalipers; Torque Wrenches, Magnetic Bases, Dial Indicators,SONY Gauging Probes, MAHR/FEDERAL Pocket Surf Unit,TAYLOR HOBSON & RAYTEK RAYNGER Surftronic TestUnits, AMETEK Gauges, ACMI Model 151A Borescope,MAHR MSP2 Scope, BARBER COLMAN Memocal 2000Hand Held Calibrator, S/N 11637; SHEFFIELD Model 542Visual Gauge, Transducers, USON Components

LAB EQUIPMENT1 – CLIMATE CONTROLLED ROOM, Sizes 20’ 7.25”

x 20’ 7.25” x 13’ 4” High; Drop Ceiling 11’ High, (2) Windows, Double Door

1 – ULRICH LAB FREEZER

1 – AQUA SENSE / SBS CORP MOISTURE MONITORING SYSTEM, S/N 4391

1 – FISHER SCIENTIFIC ISOTEMP OVEN, S/N 804N0086, Max Temp 750 Deg F

2 – FISHER SCIENTIFIC BENCH MODEL CENTRIFUGES

2 – BUEHLER MODEL SIMPLIMET 2000 AUTOMAT-IC MOUNTING PRESSES

1 – LABCONCO PROTECTIVE LABORATORYHOOD

INSPECTION EQUIPMENT

rObOtIC WeLDIng CeLLs • CnC rObOts


ROBOTIC WELDING CELLS1 – ACTION AUTOMATION TACK WELDING CELL, S/O 3702 (2000), (1) Nachi Model SA160F

CNC Robot, Mfg R#30766 (2000), Controller Type AR52 (47,166 Hours), Mfg #B99BG391; (2) Nachi Model SC15F CNC Robots, Mfg R# 30405 & 30465; Controllers Type AR52, TeachPendant; (2) Lincoln Ideal Arc DC600 Welders, (2) Lincoln NA-5 Weld Controllers, Tack Cell B

1 – ACTION AUTOMATION FINAL WELD TACK WELDING CELL, S/O 3702 (2000), (8) NachiRobots, (7) Lincoln IdealArc DC 600 Welders; (8) Lincoln NA-5 Weld Controllers, (4) ImpactWelding Arc Agent 2000 Monitoring Systems; Gantry Automatic Transfer

1 – WELDEX SHOCK WELDING CELL, Dual Fixture Cell, (4) Lincoln DC-600 Welders, (4) Lincoln NA-5 Weld Controllers, RHM Hydraulic Power Unit, Enclosure

2 – WELDEX WELDING CELLS, (4) Lincoln DC-600 Welders, Enclosure

3 – WELDEX WELDING CELLS, (2 & 1) Lincoln DC-600 Welders, (1 & 2) Lincoln NA-5 WeldController, Fixture Table, Enclosure

2 – WELDEX SHOCK BRACKET WELDING CELLS, (1 & 2) Lincoln Ideal Arc DC-600 Welders, (1) Lincoln NA-5 Weld Controller, Indramat AC Servo Compact Controller, Fixture, Enclosure

1 – WELDEX DUAL STATION SHOCK BRACKET WELDING CELL, (4) Lincoln Ideal Arc DC-600Welders, (3) Lincoln NA-5 Weld Controllers, Fixtures, Enclosure, Motor & Hydraulic Power Unit

1 – WELDEX SWAY BAR WELDING CELL, (1) Lincoln NA-5 Weld Controller, Fixture, Enclosure

1 – ACTION AUTOMATION SWAY BAR BRACKET WELDING CELL, S/N 3671-51A, (2) Lincoln Ideal Arc DC-600 Welders, (2) Lincoln NA-5 Weld Controllers, Modicon Operators Terminal, Fixture, Enclosure

1 – ACTION AUTOMATION WEST SHOCK BRACKET TO TUBE WELDING CELL, S/N 3671-51B, (2) Lincoln Ideal Arc DC-600 Welders, (2) Lincoln NA-5 Weld Controllers, Modicon Operators Terminal

1 – CURTON INC SHOCK BRACKET DUAL WELDING CELL, (4) Lincoln Ideal Arc DC-600Welders, (4) Lincoln NA-5 Weld Controllers, Enclosure, Motor & Hydraulic Power Unit

2 – WELDEX SPRING SEAT WELDING CELLS, (2) Lincoln Ideal Arc DC-600 Welders, (2) Lincoln NA-5 Weld Controllers

1 – NEWCOR WELDEX SPRING SEAT WELDING CELL, (2) Lincoln Ideal Arc DC-600 Welders, (1) Lincoln NA-5 Weld Controller, Fixture, Enclosure

1 – NEWCOR WELDEX FLANGE WELDING CELL, (2) Lincoln Ideal Arc DC-600 Welders, (2) Lincoln NA-5 Weld Controllers, Fixture, Enclosure, Motor & Hydraulic Power Unit

1 – DUAL STATION FLANGE WELDING CELL, (2) Lincoln Ideal Arc DC-600 Welders, (2) Lincoln NA-5 Weld Controllers, (2) Fixtures w/Modicon Telemecanique Control, Beta Plus DCControl, (2) Impact Welding Arc 2000 Weld Monitor System, (2) RHM Hydraulic Power Units

1 – DUAL STATION WELDING CELL, (4) Lincoln Ideal Arc DC-600 Welders, (2) Lincoln NA-5 WeldControllers

CNC GANTRY ROBOTS(NOTE: May be Offered Individually or with Transfer Lines)

3 – FANUC ROBOTIC GANTRY RAIL SYSTEMS (May Be Offered with orwithout Fanuc Robots), Length 80’ Approx: (2) With (3) Robots, (1)With (4) Robots

3 – FANUC MODEL M-710iB 70T CNC GANTRY MOUNTEDROBOTS, F-73242, F-73243, F-73244 (All 2005), Controller R-J3iB– S/N E057002246

2 – FANUC MODEL M-710iB 70T CNC GANTRY MOUNTED ROBOTS,F-73241, F-73240 (Both 2005), Controller R-J3iB – S/N E05608533

7 – FANUC MODEL M-710iB CNC GANTRY MOUNTED ROBOT, F-74307, F-73245, F-74308, F-74305, F-74306, F-73239 (All 2005), F-60920 (2003), Controller R-J3iB

CNC ROBOTS2 – ABB MODEL SC15-F 6-AXIS CNC ROBOTS, Controller Type AR,

Lincoln NA-5R Interface Adapter

1 – ABB MODEL SA160F 6-AXIS CNC ROBOT, Controller Type AR

(24) QUENCH PRESSES24 – GLEASON MODEL 529 QUENCH PRESSES, S/Ns 968204, 968202,

968206, 968201, 968203, 968205, 100108, 668202, 27901/R.30604,1739-01, 1739-04, 27901-R30171, (12) NA (To 2004), Max Diameter10.5”, Max Height 4”, Approx Total Force 49,500 lbf

Heat treat • quenCH Presses • WasHers


HEAT TREAT EQUIPMENT1 – EPCON INDUSTRIAL SYSTEMS MODEL

E-22044-G-350 TWO ZONE TYPE II CLASS BDRAW FURNACE, S/N 570-973, OverallDimensions 71’ L x 19’ 2” W x 14’ H / WorkDimensions 204’ L x 1’ 10” W x 3’ 10” H, NaturalGas, Max Temp 440 Deg F, Conveyor Fed

1 – INDUSTRIAL HEATING TWO ZONE DRAWFURNACE, Overall Length 35’ Approx xConveyor Width 34” x Height 11”

1 – THERM-ALLIANCE MODEL TEMPER NATURAL GAS FURNACE, S/N 3293(1997), Length 50’ Approx x Belt Width 34”Approx, Two Heat Zones, Max Temp 750Degrees F, Opening Height 14” Approx, NYBAir Cooler, Maxon Valves, EquipmeterRegulator, ABB Thermal Aire Fans

1 – HOLCROFT PUSHER TYPE CARBURIZ-ING RING GEAR PINION FURNACE, S/N LJ-4636, Six Lanes, Approx Dimensions40’ L x 11’ W, Five Heat Zones, Side FeedConveyor, Natural Gas

3 – HOLCROFT PUSHER TYPE CARBURIZ-ING PINION FURNACES, S/Ns CJ-4736, (2) N/A, Five Lanes, Approx Dimensions 40’ Lx 11’ W; (1) Carriers 14” x 14”, Side FeedConveyor, Natural Gas; (2) Five Heat Zones,Natural Gas, Furnace Line #8; STERLINGSYSTEMS WASHER, Motor & Gusher Pump

ANNEALING MACHINES1 – AJAX MAGNATHERMIC S-3/10-75 ANNEALING MACHINE, S/N 1B5402 – AJAX TOCCO S10 ANNEALING MACHINES, S/Ns H2M750 (1991) & NA

WASHERS3 – REINHART THREE STAGE RING/PINION LAPPING COMPOUND & MONORAIL WASHERS, S/Ns 4168000,

4198000, 4199000 (All 2007), Magelis Terminal, Open Height 60” Approx, Stainless Steel, Wash/Rinse/Blow Off,Enclosure w/60 HP Motor & New York Blower, HR BLACK Media Type Filtration System, Width 50”, Capacity 860 Gallon

1 – REINHART THREE STAGE RING/PINION LAPPING COMPOUND CONVEYOR WASHER, S/N 4198000 (2006),Magelis Terminal, Length 15’ Approx, Stainless Steel, Wash/Rinse/Blow Off, Enclosure w/60 HP Motor & New YorkBlower, BT AAA267013; Flo-Tec Filter Media Conveyor System – Carriers 22” wide

1 – FINDLAY MACHINE & TOOL THREE STAGE WASHER, Job #050038-DC-5, Length 25’ Approx, Opening 28” Wide x 44” High, Cart Fed

1 – BOWDEN MODEL CCVW-1-D-400 CHAIN CONVEYOR VERTICAL WASHING SYSTEM, Job 118.06004, LiquidTurbo Charger 7.5 HP Motor, 5 HP Blower, 7.5 HP Chip Removal Motor, Parts Carriage Rack 29” Wide, Torit Dry FloUnit, Magelis Operators Control Screen

1 – ASE / FINAL PHASE THREE STAGE WASHER, Length 42’ x Conveyor Width 15”, BT AAA294029 (Col K-21)

1 – THREE STAGE WASHER, Length 15’ x Opening 14” Wide, Conveyor Fed

1 – INDUSTRIAL METAL FABRICATORS MODEL CCVW-1-D-400 THREE STAGE MONORAIL WASHER, S/N 2124,Opening 42” H x 21” W

2 – CAE RANSAHOFF BASKET TYPE IMMERSION WASHERS, Allen Bradley Panelview 550 Terminal

1 – GALLAGHER-KAISER MODEL GYRO KLEEN THREE STAGE WASHER, Monorail Type, Opening 18" W x 26" H

MaCHIne aCCessOrIes • sWItCHgear • WeLDIng equIPMent


MARKING MACHINES4 – COLUMBIA MARKING MACHINES, S/Ns T9770, T-1188, U-4220, W-6750

1 – ABB PIN PRESS (2001), 5 HP Motor & Hydraulic Unit, Force Distance Monitor

1 – EQUIPTO ROLLING BASE STORAGE SYSTEM, Two Sets of 90Storage Cabinets (Loc Gage Room)

Wood Top Benches, STRONG HOLD Steel Storage Cabinets

MACHINE ACCESSORIES1 – ROYAL VARISET TOOL PRESETTER, S/N 14688-A

Quantity of Air Gauge Co Read Outs, Flex Gage Controls

Unused NORTON Grinding Wheels – 18” x .130” x 7/8” Opening

Over 650 – PARTS TRANSFER/STORAGE CARTS, 3 Shelf, Trays 33” x 24”

POWER DISTRIBUTION EQUIPMENT1 – BUSS DUCT – 600 AMP SERVICE – Approx 7,000 Ft

SWITCHGEAR & SWITCH STATIONSQUANTITY OF HVL LOAD INTERRUPTED SWITCHES (2004), Rated 15KVA; SQUARE D Power Logic Circuit Monitors; Power Logic Digital Controllers

WELDING EQUIPMENT1 – MILLER BOBCAT 225 G

WELDER/GENERATOR ,S/N N/A, CC/CV-AC/DC Weld Power Supply; 8,000 Watt Generator, Onan Perfomer 16 GasEngine, Rolling Cart

2 – MILLER MODEL DELTAWELD 302 CV-DC WELD POWER SOURCES, S/Ns LE492957, KH445260, 24 V Wire Feed

1 – MILLER MODEL SYNCROWAVE 350LX CC-AC/DC SQUARE WAVE POWERSOURCE, S/N LC376684, Torit Dust Collector

2 – LINCOLN MODEL IDEAL ARC 600 CV/CC DC ARC WELDERS, S/Ns U1941005925,U1970305041, (1) With Model LN9 Wire Feed; Torit 1.5 HP Trunkline Porta-Trunk

1 – LINCOLN MODEL POWER WAVE 455 WELDER, S/N U1011002765, Lincoln PowerFeed Speed 800-1200 IPM

1 – LINCOLN PRECISION TIG 275 WELDER, S/N U1060312259, Weld Mode Control

1 – LINCOLN MODEL R3S 600 DC-600 WELDER, S/N AC-870061

1 – THERMAL DYNAMICS MODEL CUTMASTER 100 PLASMA CUTTER

1 – SURFACE COMBUSTION INC SIZE RX-50-100-4V RX GENERATOR, S/N AC-43208-1,Capacity 10,000 SCFH; Natural Gas – Cu Ft/Hour 900; Reaction 2000 CuFt/Hr, APT CaseMate Process Control System,

1 – THERMCO MODEL 6205CA30A1100 BULK GAS MIXING SYSTEM, S/N N/A, SupplyCO & Argon, Capacity 0-5,000 SCFH

1 – DRY ROD MODEL 15 D ELECTRODE STABILIZING OVEN, TYPE 300, Watts 1000,Temp 100 Deg – 550 Deg F

QUANTITY OF PRESTO 48” x 56” LIFT TABLES

Welding Tables, Portable Fume Collectors, Welding Rod, Minuteman Blowers, Victor PressureRegulators, Lincoln Accu Trak Barrels of Super Arc L-56 .052” Dia. Welding Wire, C-Clamps

Bid Live in Person Onsite, or Online at

www.hilcoind.com

Some electrical distribution subject to late delivery

fabrICatIng equIPMent • engIne LatHes


FABRICATING EQUIPMENT1 – ACCURPRESS MODEL 710010 100 TON

HYDRAULIC PRESS BRAKE, S/N 4968 (1998),Overall Bed & Ram 10’, Distance BetweenHousings 8’ 6”, ETS Control, 24” Front OperatedPower Back Gauge, Throat 10”, Two (2) 36”Front Stock Supports, 10’ 4-Way Die Holde

1 – ASSORTED BRAKE DIES

1 – CHICAGO D&K MODEL PB10250 10’ X 1/4”POWER APRON BRAKE, S/N 120655, Power Clamp, Power Apron

1 – CHICAGO D&K MODEL BPU-812-6 BOX &PAN BRAKE, S/N 327193-T, Length 8’, Capacity 12 Gauge, 22 Finger Dies

1 – NATIONAL MODEL U6-7212 BOX & PAN BRAKE,S/N 785-1096, Length 6’, Capacity 12 Gauge

1 – ACCURSHEAR MODEL 625010 10’ x 1/4”POWER SQUARING SHEAR, S/N 3845 (2000),Stroke Control, 36” Front Operated Power BackGauge, Squaring Arm 8’, Front Stock Supports

1 – NIAGARA MODEL 1010SHR 10’ X 1/2” MECHANI-CAL POWER SQUARING SHEAR, S/N 51339

1 – MODEL 4 IRONWORKER, S/N N/A, Capacity:Shear 1.75” Round / 1.5” Square; Angle 90 deg – 4”x 4” x 1/2”; Coper, Punch – 1 1/16” through 5/8” Thick

2 – MARVEL SERIES 8 – MARK II UNIVERSALTILT FRAME VERTICAL BANDSAWS, S/Ns828921, 8-MARK II

1 – DO ALL 26” VERTICAL BAND SAW, S/N N/A, BT 000293616 (Loc T-33)

1 – WF WELLS MODEL F-16-2A AUTOMATIC HORIZONTAL BAND SAW, S/N A2452/F99395,Carriage Vise, Conveyor, Auto/Manual

1 – HYD MECH MODEL S-20 SERIES II HORI-ZONTAL BAND SAW, S/N 60599383

1 – PULLMAX MODEL P21 UNIVERSAL MACHINETYPE NIBBLER, S/N P21-1070, Throat 40”

1 – NATIONAL MODEL A/B 4816 POWER INITIALPINCH PLATE BENDING ROLL, Capacity 48” x16 Gauge, Roll Diameter 3”, S/N 816_99

ENGINE LATHES1 – TOOLMEX MODEL TUR 630A / 120 ENGINE

LATHE, S/N 51188, Swing 20”, Centers 125”, CrossSlide, Tail Stock, Steady Rest, Newall 2-Axis DRO,Speeds 15-1400 RPM, 15.5” Diameter 3-Jaw Chuck

1 – MONARCH ENGINE LATHE, S/N 33670, ActualSwing 18.5”, Centers 78”, Cross Slide, Tail Stock,Steady Rest, 12” Diameter 3-Jaw Chuck

1 – AXELSON ENGINE LATHE, S/N N/A, ActualSwing 18.5”, Centers 54”, Cross Slide, Tail Stock,10” Diameter 4-Jaw Chuck

1 – CLAUSING COLCHESTER ENGINE LATHE, S/N MTD 196 (2001), Swing 18”, Hole ThroughSpindle 3”, Cross Slide, Tail Stock, Steady Rest,Acu-Rite 2-Axis DRO, Inch/Metric, 13” Diameter3-Jaw Chuck

1 – TRAK MODEL TRL1745P ENGINE LATHE, S/N 98-7359 (1998), Swing 17”, Centers 45”, Proto Trak LX2Control, Tail Stock, Cross Slide, Speeds 40-2200 RPM

1 – MONARCH MODEL 20” ENGINE LATHE, S/N 24304, Actual Swing 22”, Centers 72”, TailStock, Cross Slide, 7 3/4” 3-Jaw Chuck

1 – SPRINGFIELD MODEL 16” ENGINE LATHE, S/N N/A, Swing 16”, Centers 100” Approx, CrossSlide, Tail Stock, Speeds 15-607 RPM

1 – LeBLOND MODEL REGAL ENGINE LATHE, S/N 6C1053, Swing 14”, Centers 30”, Cross Slide,Tail Stock, Speeds 45-1800 RPM

tOOLrOOM • Dust COLLeCtOrs • fILtratIOn systeMs


TOOLROOM1 – BLANCHARD MODEL NO 22CK ROTARY SURFACE GRINDER,

S/N 12807, Electromagnetic Chuck 42” Diameter, 40 HP

1 – BRIDGEPORT 3-AXIS CNC VERTICAL MILL, S/N 270227,Proto Trak MX3 Control, Kurt Power Draw Bar, Vari-Speed, 2 HP Motor

2 – BRIDGEPORT VERTICAL MILLS, Power Feed Table 9” x48”, 2 HP Motor, Kurt Power Draw Bar, Acu-Rite DRO

1 – KEARNEY & TRECKER MILWAUKEE MODEL D VERTICALMILL, S/N 4-8728, Table 16” x 36”, No 2 Rotary Milling Head

1 – CINCINNATI HYDROTEL VERTICAL MILL, S/N 1H1V1K-52-R-75, Table 28” x 60”

1 – CINCINNATI MODEL 4 HORIZONTAL MILL, S/N 2A4U1M-8,Table 11” x 68”

1 – DEVLIEG MODEL 4K-72 SPIRAMATIC JIG MILL, S/N 9190,Table 40” x 72”, Sony DRO

1 – WILTON MODEL 5216001 4’ x 17” Approx RADIAL ARMDRILL, S/N 15274, 2-Way Box Table, Speeds 40-1920 RPM

1 – CARLTON 4’ x 9” RADIAL ARM DRILL, Box Table

4 – OKAMOTO, BROWN & SHARPE AND HARIG SURFACE GRINDERS

1 – CINCINNATI 12” x 36” UNIVERSAL GRINDER, S/N 2U3D6C-2, 10” Diameter 3-Jaw Chuck, Tail Stock

1 – NORTON 10” x 18” CYLINDRICAL GRINDER

1 – DEMAGNETIZER MODEL OLAJ5x12 12” W x 5” H DEMAGNETIZER, S/N 9701X018

2 – CINCINNATI TOOL & CUTTER GRINDERS

1 – DAVIS MODEL 5 KEYSEATER, S/N 5-951

Drills, Disc Sanders/Grinders, Pedestal Grinders, Arbor Presses

SHOP PRESSES1 – LOUIS SMALL MODEL CCPM 250T 250 TON HYDRAULIC

PRESS, S/N 2624

1 – DAKE MODEL PSS 40 TON H-FRAME PRESS, S/N 4603 (2004),Power Pump, Between Uprights 35.5”

4 – DENISON MULTIPRESS & N/A 10 TON & 8 TON HYDRAULICGAP FRAME PRESSES

1 – ENERPAC 200 TON HYDRAULIC WHEEL PRESS, Bed 33” x 39”,Between Uprights 48”, Pump Series 5000, Enerpac Hyd Pump

DUST COLLECTORS / MIST COLLECTORS3 – TORIT MODELS DFT 3-36, DFT 3-24 & DF 12-8 DUST COLLECTORS

1 – MONROE ENVIRONMENTAL OMC-020-02 OIL MIST COLLECTOR

1 – HELICAL DYNAMICS INC 4KH-BD HELI-FLO SYSTEM HELICAL MIST COLLECTOR

FILTRATION SYSTEMS1 – COOLANT FILTRATION SYSTEM, (3) Motors & Pumps,

Conveyor Approx 30’ x 48” Wide, Filter & Transfer Pumps

1 – FLO-TEC INC FILTRATION SYSTEM

1 – FILTRA SYSTEMS FILTRATION SYSTEM #5, Job #1030399, MagneticSeperator Conveyor, Filter Pumps 1 & 2; Systems Supply Pumps 1,2 & 3

1 – CENTRIFUGE, Seitol Pump, Allen Bradley Panelview 600 Terminal

ROTARY TRANSFER DRILLING MACHINES1 – 8 STATION ROTARY TRANSFER DRILLING MACHINE: Drill

/Probe/Chamfer/ Ream/Probe/Tap & Probe Stations; Rotary TableDiameter 72”, 15 HP Motor & Hydraulic Unit, Chip Conveyor

1 – NEWCOR 9 STATION ROTARY DIAL TRANSFER, Rotary Table 96"Diameter, Demag Drives

asseMbLy & transfer LInes


ASSEMBLY LINES1 – ABB FLEXIBLE AUTOMATION 9 1/4” DIFFERENTIAL CARRIER ASSEMBLY

LINE (Robots May Be Offered Seperately) Including: Square D Motor ControlCenter, (5) Nachi CNC Robots, Ingersoll Rand Insight Controls, PneumaticFasteners, Trio Tool Insertion Units, Bearing Insertion Press, Nut Runners

1 – 8 1/4” REAR AXLE ASSEMBLY LINE Including: (5) NACHI CNC Robots, CentriSpray Washer; Square D Model 6 Motor Control Center; (3) ITW STR-587 Balancers, Magelis Terminals, Fasteners & Power Modules, Turntables

1 – 9 1/4” REAR AXLE ASSEMBLY LINE Including: Nut Runners, ABS Tester,Robotics Inc Automatic Sealant Applicator, Uson Tester, DominionTechnologies Axle Fill, DeMag Rails & Pneumatic Hoists

1 – 8 1/4” TRAILING AXLE ASSEMBLY LINE Including: Turn Tables, Cooper ToolsNut Runners, Qualtech Model QCS7000 Inspection Scanner, Digital TorqueWrenches, ABS Brake Test Station, Robotics Inc Automatic Sealant Applicator,Leak Flow Testers, Brake Caliper Bolts, Uson Testers, Compufill OIl Fill Station

1 – AXLE ASSEMBLY LINE Including: Auto Con Conveyor System, AtlasCopco Fastening Stations, Nachi Model SC50F-01 CNC Robot, Dual I/RPneumatic Barrel Pumps, I/R Insight Controllers, Uson Series 4000 LeakTesters, Oil Fill Station, Magelis Terminals

1 – 8 1/4” CROSS BUILD SECTION TRANSFER LINE Including: KJ BalancingCell, Nachi Model SH200 CNC Robot, (3) ITW Model STR-593 Axle Balancing Machines, CBI Controller, Cooper Fastening Systems, AtlasCopco Fastening Systems

4 – ACRO AUTOMATION ASSEMBLY, PRESS, WELD & PUNCH WELDINGLINES, (6) Lincoln Ideal Arc DC-600 Welders, Asstd Lincoln NA-5 WeldControllers, (6) AWC Dereelers, Stud & Bearing Presses, Gantry TransferArm, Service Engineering Bowl Feeders, Roman Weld Transformers,Square D Panels, Asstd Motors & Pumps; (1) (2004), (4) Lanes InboundConveyors;(1) With (2) NACHI SH200 CNC Robots (2003); (2) With WeldControls w/Indramat Digital AC Servo Compact Controllers

1 – WRIGHT-K TECHNOLOGY ASSEMBLY, PRESS, WELD & PUNCH WELDINGLINE, (2) NACHI Model SH200-03 CNC Robots (To 2008); (6) Lincoln Ideal ArcDC-600 Welders, (6) Lincoln NA-5 Weld Controllers, (6) AWC Dereelers, Stud &Bearing Presses, Gantry Transfer Arm, Service Engineering Bowl Feeders,Square D Model 6 Motor Control Center, Asstd Motors & Pumps

1 – ABB AUTOMATION PINION LINE - WK FRONT (2003) Including: (4)Nachi Model SF166-02 CNC Robots (2000), Controller AW11; (2) ITWMODEL STR-585 Balancers, S/N 6003 & 6004; Motors & Hydraulic PowerUnits, Turntables, Conveyor System, Force Distance Monitors, AtlasCopco Fastening Systems

1 – ABB AUTOMATION LXC198 AXLE ASSEMBLY LINE (2002) Including: (3) NachiModel SH166-01 CNC Robots, Controller AW11; Square D Model 6 Motor Center,Torit Dry Flo Units, Magelis Terminals, Atlas Copco Nut Runners, Turntables,Conveyors, Knight Balancers, Robotics Inc Automatic Dispensing System

TRANSFER LINES1 – EX-CELL-O 18 STATION TRANSFER LINE, Wash Booth, High Pressure Coolant,

Hydraulic Power Units, (3) NACHI Model SA130-03 CNC Robots, Controller AR; GantryLoader, Indramat Digital Compact Controllers

1 – EX-CELL-O 12 STATION INLINE TRANSFER MACHINE, Carrier Machining, IndramatDrives, Magelis Operators Terminals, Modicon Factory Mate Plus Controls, Artis ProcessMonitoring ABF-6 Controls, AutoCon Conveyor Line, Rotator Stations

2 – NACHI MODEL SA160F & SA160F-01 CNC ROBOTS (Both 1998), Controller Type AR

1 – THREE STAGE TURBO WASHER, S/N N/A, Length 20’, Opening Width 20” x Height15”, Magelis Operators Terminal, 15 HP, Part of 12 Station Inline Transfer Line

1 – FILTRASYSTEMS MODEL WW WORK CONVEYOR COOLANT FILTRATION SYSTEM,S/N 10236, Filtra Systems Job 10236, (3) System Pumps, (2) High Pressure Pumps; ChipDrag Conveyor, Industrial Vertical Turbine Pumps, Part of 12 Station Inline Transfer Line

1 – KOOLANT KOOLERS SAV 40,0000-CL-SW-AT-C COOLANT CHILLER, S/N 12873

1 – EXCELLO 7 STATION INLINE TRANSFER MACHINE, Carrier Machining, Magelis OperatorsTerminals, Samsomatic Inline Tube Gauges, Rotators, Dual Johnstone Pneumatic Bucket Pumps

1 – EX-CELL-O 9.25" CARRIER FINISHER A TRANSFER LINE Including: Machining Stations, IndramatDrive Controllers, AEC Modicon Factory Mate Plus Controls. Telemecanique CCX17 Controls

1 – EX-CELL-O FINISHER B MACHINING CELL, 3 Stations, Gantry Loader,Telemecanique CCX17 Controls, Indramat Drives

1 – LASALLE 8.25" CASE TRANSFER LINE, S/N 7173, Consisting of Sys-T-MationFeed/Unloader/Transfer; Monorail Conveyor Washer, 28 Station Transfer Line - EmersonDrives, Motors & Hydraulic Pumps

1 – LASALLE 8.25" REAR CASE TRANSFER LINE

1 – LASALLE 9.25" CASE TRANSFER LINE, 13 Station Transfer

1 – LAMB TRANSFER LINE

Cranes • fOrkLIfts • rOLLIng stOCk


CRANES2 – OVERHEAD CRANE & SERVICE 10-TON AND SHEPHARD

NILES 5-TON DUAL GIRDER OVERHEAD BRIDGECRANES, Span 45’ Approx, 6-Way Pendant

2 – CONTINENTAL CRANE 3-TON & R&M 2-TON SINGLE GIRDER CRANES

1 – CONTINENTAL CRANE 1-TON SINGLE GIRDER CRANECELL, Approx Dimensions: Span 22’ x Rail Length 70’, xHeight 16’, Space Master II Electric Hoist, 6-Way Pendant

1 – SINGLE GIRDER OVERHEAD BRIDGE CRANE, S/N CH-5953, Span 45’ Approx

FORKLIFTS1 – HOIST MODEL FKS10 20,000-LB LPG FORKLIFT, S/N

21124 (1997), Forks 84”, Hours 6769, Forks 84”1 – ROYAL MODEL TA200 20,000-LB LPG FORKLIFT,

S/N L0433, Model R35215 Boom Attachment – Capacity12,500 Lbs, S/N RTB120; Hours 5339

2 – HYSTER S180XL 18,000-LB LPG FORKLIFTS, S/Ns B024D05187V, B024D05181V, Max Lift 95”, Solid Tires

3 – YALE ELECTRIC FORKLIFTS, (2) MODELERC120HDN36SV092 12,000-LB, S/Ns A839D020224,A839D02032U, (1) MODEL ERC100HDN3BSV092 10,000-LB,S/N A839D01900U, All With Max Lift 127”, 2-Stage Mast

ROLLING STOCK1 – BRODERSON MODEL IC-80-3F MOBILE CRANE, S/N 40079, Gas Engine, Carry Deck Capacity

14,000-Lbs., Wylie Model W1250 Load Moment Indicator, Hours Meter 1518.9, 4-Wheel Steer

1 – POWER CART W/MILLER BOBCAT MODEL 225 CC/CV-AC/DC 8000 WATT GENERATOR & WELDER

1 – MATERIALS POWER CHANGERS MODEL PCE-2-40-DS-M DUAL BATTERY CHANGING STA-TIONS, S/N 0654023 & 0654050, Capacity 10,000 Lbs, Dual Conveyor 40” Wide

2 – ROTARY LIFT MODEL SP012D312 VEHICLE HOISTS, Capacity 12,000 Lbs

1 – CM DIGIT MTE TESTER, Type A-250

Large Quantity of Taylor Dunn Personnel Carts & Tuggers

4000-Lb Pallet Lifts, Tennant 5700 Floor Scrubbers, Battery Chargers & Washer, 2-Post Forklift Hoist

aIr COMPressOrs • steaM generatIOn • suPPOrt, CafeterIa & OffICe


AIR COMPRESSORS4 – INGERSOLL RAND 1000-HP, 400-HP,

350-HP, & 200-HP AIR COMPRESSORS

2 – SPEED AIRE 3JR77 & WORTHINGTON AIRCOMPRESSORS

2 – HANKINSON MODEL H-1010 10,000 SCFMAIR DRYERS

3 – SURGE TANKS

STEAM GENERATION EQUIPMENT1 – VAPOR POWER INTERNATIONAL MODEL

MG-5905-AHK-600-DS STEAM GENERATOR

1 – MODEL BHP 600 CIRCULATION HOTWATER GENERATOR, Max WP 150 PSI

6 – VAPOR LIQUID PHASE HEATERS

MISCELLANEOUS SUPPORT EQUIPMENT3 – RIDGID MODEL 535 & (2) MODEL 1224 POWER PIPE THREADERS

1 – HORIZONTAL COMPACTOR, S/N N/A, Loader Width 68”, Trash MotorPlus Control, Approx Dimensions 25’ Long x 60” Wide x 40” High

1 – SELCO MODEL V15 VERTICAL BALER, Stock #2615, Platen 27” x 59”, Cylinder Stroke 45” Approx.

1 – MARLEY COOLING TOWER

1 – MODULAR OFFICE - Approx Dimensions 11' 6" x 25' x 9' H, A/C

1 – SPX / GSE SCALE SYSTEMS MODEL PRO WEIGH 10,000 CAPACITY PLATFORM SCALE, 72" X 96"

QUANTITY OF SQUARE D I-LINE Busway Disconnect Units, Max 480 V/ 600 V, Cat PQ3606G, QTY 120 UNUSED

Large Quantity of Bearings – Timken/Dodge/Fafnir/MorseHUGE QUANTITY UNUSED COMPONENTS: Binzel, Buehler,Emerson, Fanuc, Gusher, Kurt, Nachi, NSK, Nord Gear,Numatics, Panasonic AC Servo Motors, Square D, SEWEurodrives, Tennant, More

Parts Washers, Fan Cleaning System, Pallet Racking, BarStorage Racks & Material, Stanley Vidmar Cabinets, TrashLoading Hoppers, Self Dumping Hoppers, Shop Bicycles,Ingersoll-Rand Insight Controllers, Atlas Copco & CooperIndustries Servo Driven Fasteners, Atlas Copco Power Macs,Magenetek GPD Drives, Bosch Servo Drives

CAFETERIA EQUIPMENT1 – TRUE INDUSTRIES 2-DOOR BEVERAGE COOLER

3 – TRAULSEN & 2-DOOR REFRIGERATORS

1 – BLODGETT MODEL MT1828F-AA TOASTER OVEN

1 – FRYMAST FILTER MAGIC II THREE STATION FRYER

1 – JADE RANGE INC MODEL JSR-36B 15,000 BTU NATURALGAS BROILER

1 – JADE RANGE INC MODEL JSR-36GT 24,000 BTU NATURAL GAS FRY TOP

1 – GARLAND MODEL MASTER 450 OVEN

1 – TRUE INDUSTRIES CABINET REFRIGERATOR

3 – ICE-O-MATIC, MANITOWOC & SCOTSMAN ICE MAKERS

Stainless Steel Counters & Sinks, Heated Stainless Food ServingUnits, Hobart Mixer, Hobart Meat Slicer, Stainless Steel KitchenHood, Chair & Table Sets, Aluminum & Wood Picnic Tables

OFFICE EQUIPMENTLARGE QUANTITY OF OFFICE EQUIPMENT Including: Desks,Partitions, Chairs, Conference Tables, Printers

Bid Live in Person Onsite, or Online at

www.hilcoind.com

Headquarters31555 W. Fourteen Mile Road, Suite 207Farmington Hills, MI 48334Ph: 877-37-HILCO (44526)Fx: 248.254.9995

www.hilcoind.com

Forwarding Service Requested

PresortedFirst Class MailU.S. Postage

PAIDDetroit, Mich.

Permit No. 100

Hilco Industrial, LLCA u c t i o n e e r s • L i q u i d a t o r s • A p p r a i s e r s

HILCO Industrial, LLC is a division of Hilco trading, LLC • Headquarters 5 revere Drive, ste. 206 • northbrook, IL 60062 • all rights reserved

Printed in usa • OLDC3457 • IL License #444.000215 • Please visit our website at www.hilcoind.com to review our complete terms and conditions.

Atlanta • Birmingham • Birmingham (UK) • Boston • Charlotte • Chicago • Connecticut • Dallas • Detroit • Grand Rapids • Guadalajara (MX) • Hong Kong

Irapuato (MX) • Leeds (UK) • London (UK) • Los Angeles • Mexico City (MX) • Monterrey (MX) • New York • San Francisco • Toronto • Villahermosa (MX)

terms of salea buyer’s premium of 13.5% for all onsite sales & 16% for allwebcast sales is in effect. everything will be sold to the highest bidder for cash, in accordance with the auctioneer’scustomary “terms of sale”, copies of which will be posted onthe premises of the sale and subject to additional termsannounced the day of sale. all items will be sold "as is,wheRe is" basis, and old carco liquidation trust under nocircumstances shall be deemed to have made, and herebydisclaims, any representation or warranty, either express orimplied, as to any matter whatsoever, including, without limitation, the condition of any item and the adequacy, suitability or fitness for any particular purpose of any item orany portion thereof. although obtained from sources deemed reliable, the auctioneer makes no warranty or guarantee to theaccuracy of the information herein contained. bidders areencouraged to thoroughly inspect the items on which theyintend to bid prior to sale. absolutely no items will be removeduntil the day after the conclusion of the sale and payment ismade in full. subject to additions, deletions and prior sale.

Payment: all puRchases must be paid in full onthe day of the auction. if you intend to pay by wire trans-fer, we will accept payment the day after the sale only if adeposit of 25% of total purchases is made on the day of thesale. contact our office for wire transfer instructions. only cash,wire transfer or certified check, payable to hilco industrial, llcwill be accepted. company checks payable to hilco industrial,llc will be accepted only if accompanied by a bank letter of guarantee, (see sample letter below). all sales are subject to sales tax. purchasers claiming exemptions fromtaxes must provide proof satisfactory to the auctioneer of theirentitlement to claim such exemptions.

sample Bank letter(bank name) unconditionally guarantees payment to hilco industrial, llc from (company name). this guaranteewill be valid for purchases made at the auction of oldcarco liquidating trust f/k/a chrysler detroit axle plant onjune 21 thru 23, 2011.

HILCO WebCast/OnsIte auCtIOn

FollowUs on:

for More Information, Please Contact the usa Office of:

aDDress

buILDIng sPeCIfICatIOns

sIte area

CeILIng HeIgHt

COLuMn sPaCIng

LOaDIng faCILItIes

rOOf

POWer

Waste Water treatMent

raIL

6700 lynch Road • detroit, mi 48234

built up - 60%, membrane - 40%

15 Kv input with 5 Kv distributionbackup incoming feeds - 480 v distribution

500,000 gallon capacity

front Rails, no spur

year buILt

1917 with additions through 19991.19 million sq. ft. +/-

55 acres +/-

varying 15’ to 26’

50’ x 50’

overhead doors at grade - 30loading docks - 30

Hilco real estatePhyllis RiinaPhone: +1.248.936.6863

Email: [email protected] Schnipper • Phone: +1.847.313.4790

Email: [email protected]

?g>6b ?7 2cc6dc 7?b=6b 65 3i chrysler llc

Documents