Nirma University
Institute of Technology
School of Engineering
Electrical Engineering Department
M.Tech. In Electrical Engineering (PowerElectronics, Machines & Drives)
Major Project Part - I
CERTIFICATE
This is to certify that the M.Tech Major Project Report entitled "Design of Automotive
Parts Inspection Assembly Line Including Rigs-Quality" submitted by Ms. Dhruvika
Baria (18MEEP02) towards the partial fulfillment of the requirements for the award of
degree in Master of Technology (Electrical Engineering) in the field of Power Electronics,
Machines & Drives of Nirma University is the record of work carried out by her under
our supervision and guidance. The work submitted has in our opinion reached a level
required for being accepted for examination. The results embodied in this major project
work to the best of our krnowledge have not been submitted to any other University or
Institution for award of any degree or diploma.
Date: 7-7-'20
/ 20
lomtho Institute Guide Industrial Guide
Mr. PranavKumar Patel Prof. Tejas H. Panchal
Manager-Quality Engineering Department of Electrical Engineering
MG Motor India Pvt Ltd. Institute of Technology
Halol Nirma University, Ahmedabad
Head of Department Additional Director
Dr. S.C. Vora Dr. R.N. Patel
Department of Electrical Engineering School of Engineering
Institute of Technology Institute of Technology
Nirma University Nirma University
Ahmedabad Ahmedabad
MG MORRIS GARAGES
Sinca 1924
To Whomsoever It May Concern
rify that Miss Dhruvika Baria, from Institute of Technology, Nirma University with a s is t afidr eo. 18MEEPO2, has completed internship in MG Motor India Ltd at Halol. The duration of the
internthip was 27th May 2019 to 30th April 2020. However, due to the COVID-19 pandemic, her 1G1 has been extended till 30h June 2020.
uring ernship program, she has completed her project titled "Design of Automotive Parts i spectio m Assembly Line including Rigs Quality" under the guidance of Mr. Pranav Patel of Quality
department.
During the internship period, we found she was sincere and hardworking.
We wish her well in all her future endeavours.
Yeshwinder Patial Director- HR
MG Motor india Pvt Ltd
Date: 22 June 2020
Place: Halol
MG MOTOR INDIA PRIVATE LIMITED Plant GIDC Industnal Estate. Halal. Dist. Panchmahal. Gujarat 189351, Inda
rporte & Regd Ofice 10th Floor, Milestone Experion Centre. Sector 15, Part-. Gurgaon. Hary1na 122001, Indta el9 2676 3020001 CIN U4100HR 2017FTCO72429 1Emait nlo@mgmotor co in I Web www.mgmotor co in
CERTIFICATE
This is to certify that the Major Project Report entitled, "Design and Analysis of Permanent Magnet Synchronous Motor", submitted by Mr. Parth J. Doshi (18MEEP03), towards the partial fulfillment of the requirements for the award of degree in Master of Technology (Electrical Engineering) in the field of Power Electronics, Machines & Drives of Nirma University, is the record of work carried out by him under our su-
pervision and guidance. The work submitted has in our opinion, reached a
level required for being accepted for examination. The results embodied in this major project work to the best of our knowledge have not been submit- ted to any other University or Institution for award of any degree or diploma.
Date:
Industry-Guide Institute-Guide
Mr. Sanjay Mahagaokar Group General Manager Rotomotive Powerdrives
Prof. Amit N. Patel Assistant Professor
Institute of Technology Nirma University India Ltd.
Anand Ahmedabad
-
Head of Department Department of Electrical Engineering
Institute of TechnologY Nirma University
Additional Director School of Engineering
Institute of Technology Nirma University
Ahmedabad Ahmedabad
Rotomotive Powerdrives India Ltd. (ttalan Joint Venturo company)
M
CIN: U31103GI2006PLCO48638 Rogd. Offico. 223, Napa Talpad, Gana-Borsad Road, Tal. Borsad, Anand, Gujarat - 388 560, INDIA
[email protected] rO motive fouerdaive www.rotomotivo.com
Tel: +91 9227110010/20/30 June 14, 2020
CERTIFICATE OF PROJECT TRAINING
NAME OF THE TRAINEE Mr. Parth Jayeshbhai Doshi
QUALIFICATIiON M. Tech in Electrical Engineering (Power Electronics,
Machines and Drives)
NAME OF THE INSTITUTE Institute of Technology, Nirma University
DESIGNATION Project Trainee
PROJECT DURATION 15.07.2019 to 30.04.2020
DETAILS OF PROJECI
Design and Analysis of Permanent Magnet Synchronous Motor
PROFICIENCY SHOWN BY THE TRAINEE
Regular He has good knowledge about PMSM design. He has very
good proficiency in FEA softwares such as MotorSolve and
ATTENDANCE
PRACTICAL ABILITIES/
REMARKS Magnet. He is sincere and hardworking.
We wish him all the best for his future endeavors.
For, ROTOMOTIVE PoWERDRIVES INDI� LIMITED
Mr. Batuk Dave
DGM- HR & Admin
CERTIFICATE
This is to certify that the Major Project Report entitled "Design of Three Phase, 400 Hz Powver
Supply using Three Level T-Type Topology and It's Reliability Analysis" submitted by
Ms. Gayatri Kher (18MEEP04) towards the partial fulfillment of the requirement for the award
of degree in Master of Technology (Electrical Engincering) in the ficld of Power Electronics,
Machines and Drives of Nirma University is the record of work carried out by her under our
supervision and guidance. The work submitted has in our opinion reached a level required for
being accepted for examination. The results embodied in this major project work to the best of
our knowledge have not been submitted to any other University or Institution for award of any
degree or diploma.
Institute-Guide Industry-Guide Mr. Vinod Patel Dr. M.T. Shah
DGM (R & D), Amtech Electonics (India) Ltd., E-6, G.I.D.C., Electronics Zone,
Department of Electrical Engineering, Institute of Technology.
Nirma University,Ahmedabad-382481. Sector 25, Gandhinagar-382044.
u Additional Director Head of Department
Department of Electrical Engineering, Institute of Technology,
Nirma University.
School of Engineering, Institute of Technology.
Nirma University Ahmedabad-38248 1.
Ahmedabad-382481
AUTECH ELECTVONICS (NDA) ED E4,1D Eirius Zra, Caruaza 27 UB, u na) AMTECH EtirdsrDncries.co mA=neteeris
To whomsoever it May Concern
This is to certify that Miss. GAYATRIDEVI R. KHER (13MEEPO4), studemt of
M.Tech in Electrical Engineering (Power electronics, machine and drives) from
Institute of Technology, Nirma University worked in Amtech Electronics (India)
Limited, Gandhinagar as a project trainee during July 2019 to April 2020. During
this period she has worked on "Design of Three Phase, 400 Hz Power Supply
using Three Level T-Type Topology and It's Reliability Analysis", under my
supervision.
She has successfully completed her project work with utmost dedication and
high level of engineering and analytical competence.
e wish her all the best for her future endeavours.
Mr. Vinod Patel Date: C3/05/2020
DGM (R&D) Amtech Electronics (India) Ltd.
E-6, G.I.D.C. Electronics Zone,. Gandhinagar.
ANSO SOi: 2008 COPANY bbhistiny
20 DRIVE FOR SUCCESS5
i
CERTIFICATE
This is to certify that the Major Project Report entilted ”SiC based High Efficient 180
Watt Power Supply for AC Drive Application” submitted by Mr. Mahendra Raghuraj
Gupta (18MEEP05) towards the partial fulfillment of the requirements for the award of degree
in Master of Technology (Electrical Engineering) in the field of Power Electronics, Machines&
Drives of Nirma University is the record of work carried out by him/her under our supervision
and guidance. The work submitted has in our opinion reached a level required for being accepted
for examination. The results embodied in this major project work to the best of our knowledge
have not been submitted to any other University or Institution for award of any degree or
diploma. Date:
Signature of Industry Guide Signature of Institute GuideMr. Vijendra Kharbikar Dr. Siddharthsingh K. ChauhanManager Development R&D Department of Electrical EngineeringCG Power and Industrial Solutions Ltd Institute of TechnologyBhopal Nirma UniversityMadhya Pradesh Ahmedabad
Head of Department- CG Head of Department- NUMr. Vivek Niraj Prof. Dr. S.C.VoraDrives R&D Department of Electrical EngineeringCG Power and Industrial Solutions Ltd Institute of TechnologyBhopal Nirma UniversityMadhya Pradesh Ahmedabad
Additional DirectorDr. R.N.Patel
School of EngineeringInstitute of Technology
Nirma UniversityAhmedabad
CG Power and Industrial Solutions Limited Drives and Automation Division : Industrial Systems Plot No. 9, MPAKVN PHase 2, New Industrial Area, Mandideep 462 046, Madhya Pradesh, India 1.91 7480 426 400 .91 7480 426 415b
Smart solutions Sirong relalionships.
CERTIFICATE
This is w cerity that the Major Project Report entitled "SiC bascd High Efficient 180 Watt Power Supply for AC Drive Application" submitted by Mr. Mahendra Raghuraj Gupta (18MEEPO5) towards the partial tultillment of the requirements tor the award of degree in Master of Technology (Electrical L'ngineering) in the field of Power Electronics, Machines & Drives of Nirma University is the record of uurk carried ou by kim/her under our supervision and guidanee. The work submitled has in our opinion reacheda leve! iequired forbeing accepted for examination. The results embodied in this major project work to the best of our knowledge have not been submitted to any other University or Insútution for award of ny degree or diploma.
Vj 24 202
Signuiure oflIndustry Guide Mr. Vijedra Kharbikar
Manager Development R&D Power and Industrial Soluions I.td
Signature of nstitute Guide Dr. Siddharthsingh K. Chauhan
Department of Electrical Engineering CG Institute of Technology
Nima liniversity Bhopat Madhya Pradesh
Ahmedabad
Ilead of Depakment- CG
Sold ivek Niraj Dris R&RD
Per and Industrial Soiutions Lid
nopai daa Pradesh
Head of Department-NU Prof. Dr. S.C.Vora
Department of Electrical Engineering Institute of Technology
Nima UniversityAhmedabad
Additional Director Dr. R.N.Patel
School of Engineering Institute ofTechnology
Nimaniversity Registered Otfice CG House, 6th Floor, Dr Annie Besant Road, Worli, Mumbai (90391ndia
+91 22 2423 7777 F: +91 22 2423 7733 W: www.cgglobalt.comdabaa Corporate ldentity Number: L99999MH1937PLCO02641
CERTIFICATE
This is to certify that the Major Project Report entilted "Design and Development of
Multiple Output, Low-Noise Space Qualified DG-DC Converter with Emphasis on
Miniaturization and Performance Optimization" submitted by Mr. Meet Devendra
Pandya (18MEEP06) towards the partial fulfilment of the requirements for the award of
degree in Master of Technology (Electrical Engineering) in the feld of Power Electronics
Machine and Drives Engineering at Nirma University is the record of work carried out by him
under our supervision and guidance. The work submitted has in our opinion reached a level
required for being accepted for examination. The result embodied in this major project work
to the best of our knowledge have not been submitted to any other University or Institute
for award of any degree or diploma.
Date: Aakanera
Industrial Guide Industrial Co-Guide
Mr. Jiten Bhatt Ms. Anjali Kaneria
SCI/ENGR, 'SF" SCI/ENGR, 'SC
SPSD/SEG/SEDA Department SPSD/SEG/SEDA Department
SAC, ISRO, Ahmedabad SAC, ISR0, Ahmedabad
CB.RL Institute-Guide Head of Department
Prof. Chanakya Bhatt Dr. S C Vora
Department of Electrical Engineering Department of Electrical Engineering
Institute of Technology Institute of Technology
Nirma University, Ahmedabad Nirma University, Ahmedabad
Additional Director
School of Engineering
Institute of Technology
Nirma University Ahmedabad
Government of India Department of Space SPACE APPLICATIONS CENTRE
37844T9T-380 015. (4Ta)
T4TT91-79-26913, 26913060 qua: www.sac.isro.gov.inw sac.gov.in
Ambawadi Vistar P.O. Ahmedabad 380 015. (INDIA)
Telephone:491-79-26913050, 26913060 website: www.sac.isro.gov.inlwrw.sac.govin
June 02, 2020
CERTIFICATE OF PRACTICAL TRAINING
MEET DEVENDRA PANDYA Name of Stu dent
NIRMA INSTITUTE OF TECHNOLOGY, Name of the
Institution AHMEDABAD
Period of Tra.ning 09/07/2019 to 29/05/2020
Division where SEDA/SEG/SPSD Training was taken
DETAILS OF TRAINING
"DESIGN AND DEVELOPMENT OF MULTIPLE OUTPUT, LOW-NOISE SPACE
QUALIFIED DC-DC CONVERTER WITH EMPHASIS ON MINIATURIZATION
AND PERFORMANCE OPTIMIZATION"
PROFICIENCY SHOWN BY THE CANDIDATE
Attendance Regular
He has good knowledge about DC-DC converters.
He has good proficiency in Pspice & Candence s/w
tools. He is sincere and hardworking.
Practical Ability/ Remarks
Ravisatkar) Head, HRDDD
Tru satzr zqiTa dUTA aIndian Space Research Organisation
CERTIFICATE
This is to certity that the Major Project Report entilted "Mechanical Parameter Estimation of
Three Phase Induction Motor Using VFD" submitted by Mr. Jay D. Mistry (18MEEPO7) to-
wards the fulfillment of the requirement for the award of degrec in Master of Technology(Electrical
Engineering) in the field of Power Electronics, Machines and Drives in Nirma University is the
cord of work camied out by him under our supervision and guidance. The work submitted has
in my opinion reached a level required for being accepted for examination. The results embodied
in this work is to the best of our knowledge huve not been submitted to any other University or
Institute for award of any degree or diploma.
Date:
A Industry Guide Institute Guide
Mr. Vinod Patel Dr. P.N. Tekwani
DGM(R &D Department) Professor,
AMTECH ELECTRONICS (INDIA) ltd. Department of Electrical Engineering.
Gandhinagar Institute of Technology,
Nirma University
Head of Department Institute Co-Guide
Dr. S.C. Vora Prof. C.H. Raval
Professor and Head, Assistant Professor,
Department of Electrical Engineering. Department of Electrical Engineering
Institute of Technology. Institute of Technology,
Nirma University Nirma University
AUnona Dhect GOf, 1TNr
AMTECH ELECTRONICS (INDIA) LTD E-6,G.I.D.C. Electronics Zone, Gandhinagar-302 020, Gujarat (India
Ph:91-79-29209101/02/03 Fox: 91:79-232891T E-mall: infogDamtechelectronlcs.com www.antecholectronic.com AMTECH
To whomsoever it May Concern
This is to certify that Mr. JAY D MISTRY (18MEEP07), student of M.Tech in
Electrical, Engineering (Power electronics, machine and drives) from Institute of
Technology, Nirma University worked in Amtech Electronics (India) Limited,
Gandhinagar as a project trainee during July 2019 to April 2020. During this
period he has worked on "Mechanical Parameter Estimation of Three Phase
Induction Motor Using VFD", under my supervision.
He has successfully completed his project work with utmost dedication and
high level of engineering and analytical competence.
We wish him all the best for his future endeavours.
Mr. Vinod Patel Date: 09/05/2020 DGM (R&D)
Amtech Electronics (India) Ltd. E-6, G.1.D.C. Electronics Zone,
Gandhinagar.
AN ISO 9001: 2008 COMPANY elebraling
+30: s0 BUREAU VERITAS Certticalen
DRIVE FOR SUCCESS
i
CERTIFICATE
This is to certify that the Major Project Report entilted "Functionality testing of low
voltage drive using Automated Test Pramework" submitted by Mr. Preet Parikh
(18MEEPo8) towards the partial fulâllment of requirement for the award of Master of
Technology (Electrieal Engineering) in the field of Power Electronics,Machines and Drives
of Nirma University is the record of work carried out by him under our supervision and
guidance. The work submitted has in my opinion reached a level required for being accepted
forexamination. The resultsembodiedin this major project worktothe bestofourknowledge have not been submitted to any other University or Institution for award of any degree or
diploma. Date:
Industry-Guide Institute -Guide
Mr.NageshJ Prof P.N Kapil
R&D Associate engineer Assistant Professor
MODR Department Institute ofTechnology
ABB GISPL Nirma University
Bangalore Ahmedabad
Head of Department Additional Director
Department of Electrical Engineering8 School of Engineering
Institute of Technology Institute ofTechnology
Nirma University Nirma University
Ahmedabad Ahmedabad
ABB
To Whomsoever It May Concern
This is to certify that Mr. Preet Parikh, from Institute of Technology Nirma university with a bonafide no. 18MEEP08, has completed Internship in ABB Global Industries and Services Private Limited at Bhoruka Tech Park, Bangalore, in partial fulfillment of the University course requirements from 15th June 2019 to 15th May 2020.
During the internship program, he completed a project titled "Functionality testing of low voltage drive using Automated Test Framework" under the guidance of Mr. Nagesh J, MODR divisicn. The project involved working and understanding of Automated Test Framework (ATF) used for functional testing of low voltage drives and how it is more effective and beneficial compared to manual testing and their outcomes.
During the Internship period, we found he was sincere and hard working. We wish him well in all his future endeavors.
For ABB Global Industries & Services private Limited.
Sd/ Taji Kuruvilla R&D Dept Manager- Motions
Sd/- Shareen Fatima Head HR-GISPL
AB Gobal Industries and Services Private Limited CIN: U72200KA2001PTCO32179 Registered Office and Corporate Office Phone +9180 2294 9150 54 Block No. 1, Bhoruka Tech Park Mahadevapura, Whitefeld Road Bengaluru-560 048
21st Floor, World Trade Center Fax+91 80 2294 9148 Brigade Gateway, No 26/1 Dr Rajkumar Road, Malleshwaram West www.abb.com/in Bengaluru -560 055
Phone: +91 80 6757 9950 Fax :+9180 6757 9999
CERTIFICATE
This is to certify that the Major Project Report entitled Implementation of Sensorless Vector
Control for PMSM Drive subnitted by Mr. SACHINKUMAR R. PATEL (18MEEP10 ) to-
wards towards the partial fulfilment of the requirements for the award of degree in Master of Tech-
nology (Eleetrical Engineering) in the ficld of Power Electronics. Machines and Drives of Nirma
University is the record of work carried out by him under our supervision and guidance. The work
subitted has in our opinion reached a level required for being accepted for examination. The re-
sults embodicd in this major project work to the best of our knowledge have not been submitted to
any other University or Institution for award of any degree or diploma..
Date:
Mr. Vinod Patel Prof. Chanakya B. Bhatt Industry Guide DGM. Research and Development, Amtech Electronics India Limited,
Institute Guide Assistant Professor,
Electrical Engineering Institute of Technology, Nirma University, Ahmedabad ( Gujarat)
Gandhinagar ( Gujarat)
Prof.(Dr.) R. N. Patel Additional Director,
Prof. (Dr.) S. C. Vora
Head of Department,
Electrical Engineering Institute od Technology. Nirma University Ahmedabad ( Gujarat)
School of Enginnering
Institute of Technology.
Nirma University, Ahmedabad (Gujarat )
AMTECH ELECTRONICS (INDIA) LTD E-6, GLD.C Electronics Zone, Gandhinagar-382 028, Gujarat (India) Ph:-91-79-23289101/ 02/ 03. Fax.91-79-2328911 E-mai [email protected] www.amtechelectronicS.com AMTECH
To whomsoever it May Concern
This is to certify that Mr. SACHINKUMAR R. PATEL (18MEEP10), student of M.Tech in Electrical Engineering (Power electronics, machine and drives) from
Institute of Technology, Nirma University worked in Amtech Electronics (India) Limited, Gandhinagar as a project trainee during July 2019 to April 2020. During this period he has worked on "lmplementation of Sensorless Vector Control
for PMSM Drive", under my supervision.
He has successfully completed his project work with utmost dedication and
high level of engineering and analytical competence We wish him all the best for his future endeavours.
Mr. Vinod Patel Date: 9/05/2020
DGM (R&D) Amtech Electronics (India) Ltd. E-6, G.1.D.C. Electronics Zone,
Gandhinagar.
AN ISO 9001: 2008 COMPANY
olebraling 30 erthc
iccess DRIVE FOR SUCCESs
CERTIFICATE
This is to certify that the Summer Training entilted Development of Driver Card to Drive Sic
MOSFET/IGBT at 100kHz submitted by Mr. Ujaskumar Patel (18MEEP11) towards the ful-
filment in Summer training (M.Tech Power Electronics Machine and Drives Engineering) at Nirma
University is the record of work carried out by him under our supervision and guidance. The work
submitted has in my opinion reached a level required for being accepted for examination. The re-
sults embodied in major project work to the best of my knowledge have not been submitted to any
other University or Institute.
Prof. Annima Gupta
Assistant Professor Electrical Engineering. Institute of Technology. Nirma University.
Ahmedabad ( Gujarat)
Mr. Vinod Patcl Industry Guide
DGM. Rescarch and Development. Amtech Electronics India Limited. Gandhinagar ( Gujarat)
Dr. S.C Vora Dr. R. N. Patel Head of Department,
Electrical Engineering. Institute of Technology. Nirma University
Ahmedabad (Gujarat)
Additional Director, School of Enginnering
Institute of Technology, Nirma University, Ahmedabad ( Gujarat )
AMTECH ELECTRONICS (INDIA) LTD.
E&GIDCEectroncs Zane Ganchinagar 382 078 Cujarat lns Fh.91-79 232S901/ 02/ 03 Fax .91-79-2328911
& mal [email protected] antechelecroscom AMTECH
To whomsoever it May Concern
This is to certify that Mr. UJASKUMAR ROHITBHAI PATEL (18MEEP11), student of M.Tech in Electrical Engineering (Power electronics, machine and drives) from Institute of Technology, Nirma University worked in Amtech Electronics (India) Limited, Gandhinagar as a project trainee during July 2019 to April 2020. During this period he has worked on "Development of Driver Card to Drive Sic
MOSFET/IGBT at 100kHz", under my supervision.
He has successfully completed his project work with utmost dedication and
high level of engineering and analytical competence.
We wish him all the best for his future endeavours.
Mr. Vinod Patel Date:09/05/2020 DGM (R&D) Amtech Electronics (India) Ltd. E-6, G.1.D.c. Electronics Zone,
Gandhinagar.
olebvaliny AN ISO 9001: 2008 COMPANY
30 s LREL VERNT
NABCB
DRIVE FOR SUCCESS
CERTIFICATE
This is to certify the M.Tech Major Project Report entitled " Improvement of Automotive
Lightings and Wiring Harnesses Commodity Parts " submitted by Ms. Shivani Rathod
(18MEEP12) towards the partial fulfillment of the requirements for the award of degree in
Master of Technology (Electrical Engineering) in the field of Power Electronics, Machines
& Drives of Nirma University is the record of work carried out by her under our super-
vision and guidance. The work submitted has in our opinion reached a level required for
being accepted for examination. The results embodied in this major project work to the
best of our knowledge have not been submitted to any other University or Institution for
award of any degree or diploma.
Date: 0 -o4- 20
Industrial Guide Institute Guide
Mr. Sharwan Karwa Prof. Akhilesh Panwar
Manager-Supplier Quality Engineering Department of Electrical Engineering
MG Motor India Pvt Ltd. Institute of Technology
Halol Nirma University, Ahmedabad
Head of Department
Dr. S.C. Vora Additional Director
Department of Electrical Engineering School of Engineering
Institute of Technology Institute of Technology
Nirma University Nirma University
Ahmedabad Ahmedabad
MORRIS SARAGES
SInce 1924
To Whomsoever It May Concern
This is to certify that Miss Shivani Rathod, from Institute of Technology, Nirma University with a
bonafide no. 18MEEP12, has completed internship in MG Motor India Ltd at Halol. The duration of the
int:nship was 27th May 2019 to 30th April 2020. However, due to the COVID-19 pandemic, her
intensp al toias been extended till 30h June 2020.
During the interiip program, she has completed her project titled "Improvement of Automotive Lightings aWiring Harnesses Commodity Pats" under the guidance of Mr. Sharwan Kharwa of SQE
departme he project report has been submitted and reviewed.
During the internship period, we found she was sincere and hardworking.
We wish her well in all her future endeavours.
Yeshwinder Patial
Director- HR
MG Motor India Pvt Ltd
Date: 22 June 2020
Place: Halol
MG MOTOR INDIA PRIVATE LIMITED
Plant: GIDC Industrial Estate., Halol, Dist Panchmahal. Gujarat 389351. Indta Corporate &Regd Ofice: 10th Floor, Milestone Experion Centre, Sector 15. Part-il. Gurgaon. Haryana- 122001. India Tel: +91 2676 302000 I CIN UJ4100HR2017ETCo72429 1 E-mall: info@mgmotor co in I Web: www.mgmotor.co.in
Certificate
This is to certify that the Project Report entitled "Design of Permanent Magnet
Motor for Automotive Applications" submitted by Miss, Rashmi Meena (18MEEP15),
towards the partial fulfillment of the requirements for the award of degree of Master
of Technology in Power Electronics, Machines and Drives of University is the record of
work carried out by him under our supervision and guidance. The work submitted has
in our opinion reached a level required for being accepted for cxamination. The results
embodied in this project work to the best of our knowledge have not been submitted to
any other University or Institution for avard of any degree or diploma.
Prof. Amit N. Patel
Project Guide
Assistant Professor
Department of Electrical Engineering
Institute of Technology
Nirma University
Ahmedabad
Head Of Department Additional Director
Departient of Electrical Engineering School of Eugineering
stitnte of Technology Iustitute of Tecnology
Nimna University Nirma University
Ahmedabad Ahmedabad
Nirma University
Institute of Technology
School of Engineering
Electrical Engineering Department
M.Tech. In Electrical Engineering (PowerElectronics, Machines & Drives)
Major Project Part - II
CERTIFICATE
This is to certify that the M.Tech Major Project Report entitled "Design of Automotive
Parts Inspection Assembly Line Including Rigs-Quality" submitted by Ms. Dhruvika
Baria (18MEEP02) towards the partial fulfillment of the requirements for the award of
degree in Master of Technology (Electrical Engineering) in the field of Power Electronics,
Machines & Drives of Nirma University is the record of work carried out by her under
our supervision and guidance. The work submitted has in our opinion reached a level
required for being accepted for examination. The results embodied in this major project
work to the best of our krnowledge have not been submitted to any other University or
Institution for award of any degree or diploma.
Date: 7-7-'20
/ 20
lomtho Institute Guide Industrial Guide
Mr. PranavKumar Patel Prof. Tejas H. Panchal
Manager-Quality Engineering Department of Electrical Engineering
MG Motor India Pvt Ltd. Institute of Technology
Halol Nirma University, Ahmedabad
Head of Department Additional Director
Dr. S.C. Vora Dr. R.N. Patel
Department of Electrical Engineering School of Engineering
Institute of Technology Institute of Technology
Nirma University Nirma University
Ahmedabad Ahmedabad
MG MORRIS GARAGES
Sinca 1924
To Whomsoever It May Concern
rify that Miss Dhruvika Baria, from Institute of Technology, Nirma University with a s is t afidr eo. 18MEEPO2, has completed internship in MG Motor India Ltd at Halol. The duration of the
internthip was 27th May 2019 to 30th April 2020. However, due to the COVID-19 pandemic, her 1G1 has been extended till 30h June 2020.
uring ernship program, she has completed her project titled "Design of Automotive Parts i spectio m Assembly Line including Rigs Quality" under the guidance of Mr. Pranav Patel of Quality
department.
During the internship period, we found she was sincere and hardworking.
We wish her well in all her future endeavours.
Yeshwinder Patial Director- HR
MG Motor india Pvt Ltd
Date: 22 June 2020
Place: Halol
MG MOTOR INDIA PRIVATE LIMITED Plant GIDC Industnal Estate. Halal. Dist. Panchmahal. Gujarat 189351, Inda
rporte & Regd Ofice 10th Floor, Milestone Experion Centre. Sector 15, Part-. Gurgaon. Hary1na 122001, Indta el9 2676 3020001 CIN U4100HR 2017FTCO72429 1Emait nlo@mgmotor co in I Web www.mgmotor co in
CERTIFICATE
This is to certify that the Major Project Report entitled, "Design and Analysis of Permanent Magnet Synchronous Motor", submitted by Mr. Parth J. Doshi (18MEEP03), towards the partial fulfillment of the requirements for the award of degree in Master of Technology (Electrical Engineering) in the field of Power Electronics, Machines & Drives of Nirma University, is the record of work carried out by him under our su-
pervision and guidance. The work submitted has in our opinion, reached a
level required for being accepted for examination. The results embodied in this major project work to the best of our knowledge have not been submit- ted to any other University or Institution for award of any degree or diploma.
Date:
Industry-Guide Institute-Guide
Mr. Sanjay Mahagaokar Group General Manager Rotomotive Powerdrives
Prof. Amit N. Patel Assistant Professor
Institute of Technology Nirma University India Ltd.
Anand Ahmedabad
-
Head of Department Department of Electrical Engineering
Institute of TechnologY Nirma University
Additional Director School of Engineering
Institute of Technology Nirma University
Ahmedabad Ahmedabad
Rotomotive Powerdrives India Ltd. (ttalan Joint Venturo company)
M
CIN: U31103GI2006PLCO48638 Rogd. Offico. 223, Napa Talpad, Gana-Borsad Road, Tal. Borsad, Anand, Gujarat - 388 560, INDIA
[email protected] rO motive fouerdaive www.rotomotivo.com
Tel: +91 9227110010/20/30 June 14, 2020
CERTIFICATE OF PROJECT TRAINING
NAME OF THE TRAINEE Mr. Parth Jayeshbhai Doshi
QUALIFICATIiON M. Tech in Electrical Engineering (Power Electronics,
Machines and Drives)
NAME OF THE INSTITUTE Institute of Technology, Nirma University
DESIGNATION Project Trainee
PROJECT DURATION 15.07.2019 to 30.04.2020
DETAILS OF PROJECI
Design and Analysis of Permanent Magnet Synchronous Motor
PROFICIENCY SHOWN BY THE TRAINEE
Regular He has good knowledge about PMSM design. He has very
good proficiency in FEA softwares such as MotorSolve and
ATTENDANCE
PRACTICAL ABILITIES/
REMARKS Magnet. He is sincere and hardworking.
We wish him all the best for his future endeavors.
For, ROTOMOTIVE PoWERDRIVES INDI� LIMITED
Mr. Batuk Dave
DGM- HR & Admin
CERTIFICATE
This is to certify that the Major Project Report entitled "Design of Three Phase, 400 Hz Powver
Supply using Three Level T-Type Topology and It's Reliability Analysis" submitted by
Ms. Gayatri Kher (18MEEP04) towards the partial fulfillment of the requirement for the award
of degree in Master of Technology (Electrical Engincering) in the ficld of Power Electronics,
Machines and Drives of Nirma University is the record of work carried out by her under our
supervision and guidance. The work submitted has in our opinion reached a level required for
being accepted for examination. The results embodied in this major project work to the best of
our knowledge have not been submitted to any other University or Institution for award of any
degree or diploma.
Institute-Guide Industry-Guide Mr. Vinod Patel Dr. M.T. Shah
DGM (R & D), Amtech Electonics (India) Ltd., E-6, G.I.D.C., Electronics Zone,
Department of Electrical Engineering, Institute of Technology.
Nirma University,Ahmedabad-382481. Sector 25, Gandhinagar-382044.
u Additional Director Head of Department
Department of Electrical Engineering, Institute of Technology,
Nirma University.
School of Engineering, Institute of Technology.
Nirma University Ahmedabad-38248 1.
Ahmedabad-382481
AUTECH ELECTVONICS (NDA) ED E4,1D Eirius Zra, Caruaza 27 UB, u na) AMTECH EtirdsrDncries.co mA=neteeris
To whomsoever it May Concern
This is to certify that Miss. GAYATRIDEVI R. KHER (13MEEPO4), studemt of
M.Tech in Electrical Engineering (Power electronics, machine and drives) from
Institute of Technology, Nirma University worked in Amtech Electronics (India)
Limited, Gandhinagar as a project trainee during July 2019 to April 2020. During
this period she has worked on "Design of Three Phase, 400 Hz Power Supply
using Three Level T-Type Topology and It's Reliability Analysis", under my
supervision.
She has successfully completed her project work with utmost dedication and
high level of engineering and analytical competence.
e wish her all the best for her future endeavours.
Mr. Vinod Patel Date: C3/05/2020
DGM (R&D) Amtech Electronics (India) Ltd.
E-6, G.I.D.C. Electronics Zone,. Gandhinagar.
ANSO SOi: 2008 COPANY bbhistiny
20 DRIVE FOR SUCCESS5
i
CERTIFICATE
This is to certify that the Major Project Report entilted ”SiC based High Efficient 180
Watt Power Supply for AC Drive Application” submitted by Mr. Mahendra Raghuraj
Gupta (18MEEP05) towards the partial fulfillment of the requirements for the award of degree
in Master of Technology (Electrical Engineering) in the field of Power Electronics, Machines&
Drives of Nirma University is the record of work carried out by him/her under our supervision
and guidance. The work submitted has in our opinion reached a level required for being accepted
for examination. The results embodied in this major project work to the best of our knowledge
have not been submitted to any other University or Institution for award of any degree or
diploma. Date:
Signature of Industry Guide Signature of Institute GuideMr. Vijendra Kharbikar Dr. Siddharthsingh K. ChauhanManager Development R&D Department of Electrical EngineeringCG Power and Industrial Solutions Ltd Institute of TechnologyBhopal Nirma UniversityMadhya Pradesh Ahmedabad
Head of Department- CG Head of Department- NUMr. Vivek Niraj Prof. Dr. S.C.VoraDrives R&D Department of Electrical EngineeringCG Power and Industrial Solutions Ltd Institute of TechnologyBhopal Nirma UniversityMadhya Pradesh Ahmedabad
Additional DirectorDr. R.N.Patel
School of EngineeringInstitute of Technology
Nirma UniversityAhmedabad
CG Power and Industrial Solutions Limited Drives and Automation Division : Industrial Systems Plot No. 9, MPAKVN PHase 2, New Industrial Area, Mandideep 462 046, Madhya Pradesh, India 1.91 7480 426 400 .91 7480 426 415b
Smart solutions Sirong relalionships.
CERTIFICATE
This is w cerity that the Major Project Report entitled "SiC bascd High Efficient 180 Watt Power Supply for AC Drive Application" submitted by Mr. Mahendra Raghuraj Gupta (18MEEPO5) towards the partial tultillment of the requirements tor the award of degree in Master of Technology (Electrical L'ngineering) in the field of Power Electronics, Machines & Drives of Nirma University is the record of uurk carried ou by kim/her under our supervision and guidanee. The work submitled has in our opinion reacheda leve! iequired forbeing accepted for examination. The results embodied in this major project work to the best of our knowledge have not been submitted to any other University or Insútution for award of ny degree or diploma.
Vj 24 202
Signuiure oflIndustry Guide Mr. Vijedra Kharbikar
Manager Development R&D Power and Industrial Soluions I.td
Signature of nstitute Guide Dr. Siddharthsingh K. Chauhan
Department of Electrical Engineering CG Institute of Technology
Nima liniversity Bhopat Madhya Pradesh
Ahmedabad
Ilead of Depakment- CG
Sold ivek Niraj Dris R&RD
Per and Industrial Soiutions Lid
nopai daa Pradesh
Head of Department-NU Prof. Dr. S.C.Vora
Department of Electrical Engineering Institute of Technology
Nima UniversityAhmedabad
Additional Director Dr. R.N.Patel
School of Engineering Institute ofTechnology
Nimaniversity Registered Otfice CG House, 6th Floor, Dr Annie Besant Road, Worli, Mumbai (90391ndia
+91 22 2423 7777 F: +91 22 2423 7733 W: www.cgglobalt.comdabaa Corporate ldentity Number: L99999MH1937PLCO02641
CERTIFICATE
This is to certify that the Major Project Report entilted "Design and Development of
Multiple Output, Low-Noise Space Qualified DG-DC Converter with Emphasis on
Miniaturization and Performance Optimization" submitted by Mr. Meet Devendra
Pandya (18MEEP06) towards the partial fulfilment of the requirements for the award of
degree in Master of Technology (Electrical Engineering) in the feld of Power Electronics
Machine and Drives Engineering at Nirma University is the record of work carried out by him
under our supervision and guidance. The work submitted has in our opinion reached a level
required for being accepted for examination. The result embodied in this major project work
to the best of our knowledge have not been submitted to any other University or Institute
for award of any degree or diploma.
Date: Aakanera
Industrial Guide Industrial Co-Guide
Mr. Jiten Bhatt Ms. Anjali Kaneria
SCI/ENGR, 'SF" SCI/ENGR, 'SC
SPSD/SEG/SEDA Department SPSD/SEG/SEDA Department
SAC, ISRO, Ahmedabad SAC, ISR0, Ahmedabad
CB.RL Institute-Guide Head of Department
Prof. Chanakya Bhatt Dr. S C Vora
Department of Electrical Engineering Department of Electrical Engineering
Institute of Technology Institute of Technology
Nirma University, Ahmedabad Nirma University, Ahmedabad
Additional Director
School of Engineering
Institute of Technology
Nirma University Ahmedabad
Government of India Department of Space SPACE APPLICATIONS CENTRE
37844T9T-380 015. (4Ta)
T4TT91-79-26913, 26913060 qua: www.sac.isro.gov.inw sac.gov.in
Ambawadi Vistar P.O. Ahmedabad 380 015. (INDIA)
Telephone:491-79-26913050, 26913060 website: www.sac.isro.gov.inlwrw.sac.govin
June 02, 2020
CERTIFICATE OF PRACTICAL TRAINING
MEET DEVENDRA PANDYA Name of Stu dent
NIRMA INSTITUTE OF TECHNOLOGY, Name of the
Institution AHMEDABAD
Period of Tra.ning 09/07/2019 to 29/05/2020
Division where SEDA/SEG/SPSD Training was taken
DETAILS OF TRAINING
"DESIGN AND DEVELOPMENT OF MULTIPLE OUTPUT, LOW-NOISE SPACE
QUALIFIED DC-DC CONVERTER WITH EMPHASIS ON MINIATURIZATION
AND PERFORMANCE OPTIMIZATION"
PROFICIENCY SHOWN BY THE CANDIDATE
Attendance Regular
He has good knowledge about DC-DC converters.
He has good proficiency in Pspice & Candence s/w
tools. He is sincere and hardworking.
Practical Ability/ Remarks
Ravisatkar) Head, HRDDD
Tru satzr zqiTa dUTA aIndian Space Research Organisation
CERTIFICATE
This is to certity that the Major Project Report entilted "Mechanical Parameter Estimation of
Three Phase Induction Motor Using VFD" submitted by Mr. Jay D. Mistry (18MEEPO7) to-
wards the fulfillment of the requirement for the award of degrec in Master of Technology(Electrical
Engineering) in the field of Power Electronics, Machines and Drives in Nirma University is the
cord of work camied out by him under our supervision and guidance. The work submitted has
in my opinion reached a level required for being accepted for examination. The results embodied
in this work is to the best of our knowledge huve not been submitted to any other University or
Institute for award of any degree or diploma.
Date:
A Industry Guide Institute Guide
Mr. Vinod Patel Dr. P.N. Tekwani
DGM(R &D Department) Professor,
AMTECH ELECTRONICS (INDIA) ltd. Department of Electrical Engineering.
Gandhinagar Institute of Technology,
Nirma University
Head of Department Institute Co-Guide
Dr. S.C. Vora Prof. C.H. Raval
Professor and Head, Assistant Professor,
Department of Electrical Engineering. Department of Electrical Engineering
Institute of Technology. Institute of Technology,
Nirma University Nirma University
AUnona Dhect GOf, 1TNr
AMTECH ELECTRONICS (INDIA) LTD E-6,G.I.D.C. Electronics Zone, Gandhinagar-302 020, Gujarat (India
Ph:91-79-29209101/02/03 Fox: 91:79-232891T E-mall: infogDamtechelectronlcs.com www.antecholectronic.com AMTECH
To whomsoever it May Concern
This is to certify that Mr. JAY D MISTRY (18MEEP07), student of M.Tech in
Electrical, Engineering (Power electronics, machine and drives) from Institute of
Technology, Nirma University worked in Amtech Electronics (India) Limited,
Gandhinagar as a project trainee during July 2019 to April 2020. During this
period he has worked on "Mechanical Parameter Estimation of Three Phase
Induction Motor Using VFD", under my supervision.
He has successfully completed his project work with utmost dedication and
high level of engineering and analytical competence.
We wish him all the best for his future endeavours.
Mr. Vinod Patel Date: 09/05/2020 DGM (R&D)
Amtech Electronics (India) Ltd. E-6, G.1.D.C. Electronics Zone,
Gandhinagar.
AN ISO 9001: 2008 COMPANY elebraling
+30: s0 BUREAU VERITAS Certticalen
DRIVE FOR SUCCESS
i
CERTIFICATE
This is to certify that the Major Project Report entilted "Functionality testing of low
voltage drive using Automated Test Pramework" submitted by Mr. Preet Parikh
(18MEEPo8) towards the partial fulâllment of requirement for the award of Master of
Technology (Electrieal Engineering) in the field of Power Electronics,Machines and Drives
of Nirma University is the record of work carried out by him under our supervision and
guidance. The work submitted has in my opinion reached a level required for being accepted
forexamination. The resultsembodiedin this major project worktothe bestofourknowledge have not been submitted to any other University or Institution for award of any degree or
diploma. Date:
Industry-Guide Institute -Guide
Mr.NageshJ Prof P.N Kapil
R&D Associate engineer Assistant Professor
MODR Department Institute ofTechnology
ABB GISPL Nirma University
Bangalore Ahmedabad
Head of Department Additional Director
Department of Electrical Engineering8 School of Engineering
Institute of Technology Institute ofTechnology
Nirma University Nirma University
Ahmedabad Ahmedabad
ABB
To Whomsoever It May Concern
This is to certify that Mr. Preet Parikh, from Institute of Technology Nirma university with a bonafide no. 18MEEP08, has completed Internship in ABB Global Industries and Services Private Limited at Bhoruka Tech Park, Bangalore, in partial fulfillment of the University course requirements from 15th June 2019 to 15th May 2020.
During the internship program, he completed a project titled "Functionality testing of low voltage drive using Automated Test Framework" under the guidance of Mr. Nagesh J, MODR divisicn. The project involved working and understanding of Automated Test Framework (ATF) used for functional testing of low voltage drives and how it is more effective and beneficial compared to manual testing and their outcomes.
During the Internship period, we found he was sincere and hard working. We wish him well in all his future endeavors.
For ABB Global Industries & Services private Limited.
Sd/ Taji Kuruvilla R&D Dept Manager- Motions
Sd/- Shareen Fatima Head HR-GISPL
AB Gobal Industries and Services Private Limited CIN: U72200KA2001PTCO32179 Registered Office and Corporate Office Phone +9180 2294 9150 54 Block No. 1, Bhoruka Tech Park Mahadevapura, Whitefeld Road Bengaluru-560 048
21st Floor, World Trade Center Fax+91 80 2294 9148 Brigade Gateway, No 26/1 Dr Rajkumar Road, Malleshwaram West www.abb.com/in Bengaluru -560 055
Phone: +91 80 6757 9950 Fax :+9180 6757 9999
CERTIFICATE
This is to certify that the Major Project Report entitled Implementation of Sensorless Vector
Control for PMSM Drive subnitted by Mr. SACHINKUMAR R. PATEL (18MEEP10 ) to-
wards towards the partial fulfilment of the requirements for the award of degree in Master of Tech-
nology (Eleetrical Engineering) in the ficld of Power Electronics. Machines and Drives of Nirma
University is the record of work carried out by him under our supervision and guidance. The work
subitted has in our opinion reached a level required for being accepted for examination. The re-
sults embodicd in this major project work to the best of our knowledge have not been submitted to
any other University or Institution for award of any degree or diploma..
Date:
Mr. Vinod Patel Prof. Chanakya B. Bhatt Industry Guide DGM. Research and Development, Amtech Electronics India Limited,
Institute Guide Assistant Professor,
Electrical Engineering Institute of Technology, Nirma University, Ahmedabad ( Gujarat)
Gandhinagar ( Gujarat)
Prof.(Dr.) R. N. Patel Additional Director,
Prof. (Dr.) S. C. Vora
Head of Department,
Electrical Engineering Institute od Technology. Nirma University Ahmedabad ( Gujarat)
School of Enginnering
Institute of Technology.
Nirma University, Ahmedabad (Gujarat )
AMTECH ELECTRONICS (INDIA) LTD E-6, GLD.C Electronics Zone, Gandhinagar-382 028, Gujarat (India) Ph:-91-79-23289101/ 02/ 03. Fax.91-79-2328911 E-mai [email protected] www.amtechelectronicS.com AMTECH
To whomsoever it May Concern
This is to certify that Mr. SACHINKUMAR R. PATEL (18MEEP10), student of M.Tech in Electrical Engineering (Power electronics, machine and drives) from
Institute of Technology, Nirma University worked in Amtech Electronics (India) Limited, Gandhinagar as a project trainee during July 2019 to April 2020. During this period he has worked on "lmplementation of Sensorless Vector Control
for PMSM Drive", under my supervision.
He has successfully completed his project work with utmost dedication and
high level of engineering and analytical competence We wish him all the best for his future endeavours.
Mr. Vinod Patel Date: 9/05/2020
DGM (R&D) Amtech Electronics (India) Ltd. E-6, G.1.D.C. Electronics Zone,
Gandhinagar.
AN ISO 9001: 2008 COMPANY
olebraling 30 erthc
iccess DRIVE FOR SUCCESs
CERTIFICATE
This is to certify that the Summer Training entilted Development of Driver Card to Drive Sic
MOSFET/IGBT at 100kHz submitted by Mr. Ujaskumar Patel (18MEEP11) towards the ful-
filment in Summer training (M.Tech Power Electronics Machine and Drives Engineering) at Nirma
University is the record of work carried out by him under our supervision and guidance. The work
submitted has in my opinion reached a level required for being accepted for examination. The re-
sults embodied in major project work to the best of my knowledge have not been submitted to any
other University or Institute.
Prof. Annima Gupta
Assistant Professor Electrical Engineering. Institute of Technology. Nirma University.
Ahmedabad ( Gujarat)
Mr. Vinod Patcl Industry Guide
DGM. Rescarch and Development. Amtech Electronics India Limited. Gandhinagar ( Gujarat)
Dr. S.C Vora Dr. R. N. Patel Head of Department,
Electrical Engineering. Institute of Technology. Nirma University
Ahmedabad (Gujarat)
Additional Director, School of Enginnering
Institute of Technology, Nirma University, Ahmedabad ( Gujarat )
AMTECH ELECTRONICS (INDIA) LTD.
E&GIDCEectroncs Zane Ganchinagar 382 078 Cujarat lns Fh.91-79 232S901/ 02/ 03 Fax .91-79-2328911
& mal [email protected] antechelecroscom AMTECH
To whomsoever it May Concern
This is to certify that Mr. UJASKUMAR ROHITBHAI PATEL (18MEEP11), student of M.Tech in Electrical Engineering (Power electronics, machine and drives) from Institute of Technology, Nirma University worked in Amtech Electronics (India) Limited, Gandhinagar as a project trainee during July 2019 to April 2020. During this period he has worked on "Development of Driver Card to Drive Sic
MOSFET/IGBT at 100kHz", under my supervision.
He has successfully completed his project work with utmost dedication and
high level of engineering and analytical competence.
We wish him all the best for his future endeavours.
Mr. Vinod Patel Date:09/05/2020 DGM (R&D) Amtech Electronics (India) Ltd. E-6, G.1.D.c. Electronics Zone,
Gandhinagar.
olebvaliny AN ISO 9001: 2008 COMPANY
30 s LREL VERNT
NABCB
DRIVE FOR SUCCESS
CERTIFICATE
This is to certify the M.Tech Major Project Report entitled " Improvement of Automotive
Lightings and Wiring Harnesses Commodity Parts " submitted by Ms. Shivani Rathod
(18MEEP12) towards the partial fulfillment of the requirements for the award of degree in
Master of Technology (Electrical Engineering) in the field of Power Electronics, Machines
& Drives of Nirma University is the record of work carried out by her under our super-
vision and guidance. The work submitted has in our opinion reached a level required for
being accepted for examination. The results embodied in this major project work to the
best of our knowledge have not been submitted to any other University or Institution for
award of any degree or diploma.
Date: 0 -o4- 20
Industrial Guide Institute Guide
Mr. Sharwan Karwa Prof. Akhilesh Panwar
Manager-Supplier Quality Engineering Department of Electrical Engineering
MG Motor India Pvt Ltd. Institute of Technology
Halol Nirma University, Ahmedabad
Head of Department
Dr. S.C. Vora Additional Director
Department of Electrical Engineering School of Engineering
Institute of Technology Institute of Technology
Nirma University Nirma University
Ahmedabad Ahmedabad
MORRIS SARAGES
SInce 1924
To Whomsoever It May Concern
This is to certify that Miss Shivani Rathod, from Institute of Technology, Nirma University with a
bonafide no. 18MEEP12, has completed internship in MG Motor India Ltd at Halol. The duration of the
int:nship was 27th May 2019 to 30th April 2020. However, due to the COVID-19 pandemic, her
intensp al toias been extended till 30h June 2020.
During the interiip program, she has completed her project titled "Improvement of Automotive Lightings aWiring Harnesses Commodity Pats" under the guidance of Mr. Sharwan Kharwa of SQE
departme he project report has been submitted and reviewed.
During the internship period, we found she was sincere and hardworking.
We wish her well in all her future endeavours.
Yeshwinder Patial
Director- HR
MG Motor India Pvt Ltd
Date: 22 June 2020
Place: Halol
MG MOTOR INDIA PRIVATE LIMITED
Plant: GIDC Industrial Estate., Halol, Dist Panchmahal. Gujarat 389351. Indta Corporate &Regd Ofice: 10th Floor, Milestone Experion Centre, Sector 15. Part-il. Gurgaon. Haryana- 122001. India Tel: +91 2676 302000 I CIN UJ4100HR2017ETCo72429 1 E-mall: info@mgmotor co in I Web: www.mgmotor.co.in
Certificate
This is to certify that the Project Report entitled "Design of Permanent Magnet
Motor for Automotive Applications" submitted by Miss, Rashmi Meena (18MEEP15),
towards the partial fulfillment of the requirements for the award of degree of Master
of Technology in Power Electronics, Machines and Drives of University is the record of
work carried out by him under our supervision and guidance. The work submitted has
in our opinion reached a level required for being accepted for cxamination. The results
embodied in this project work to the best of our knowledge have not been submitted to
any other University or Institution for avard of any degree or diploma.
Prof. Amit N. Patel
Project Guide
Assistant Professor
Department of Electrical Engineering
Institute of Technology
Nirma University
Ahmedabad
Head Of Department Additional Director
Departient of Electrical Engineering School of Eugineering
stitnte of Technology Iustitute of Tecnology
Nimna University Nirma University
Ahmedabad Ahmedabad