nirma university institute of technology school of ......m.tech in electrical engineering (power...

Nirma University

Institute of Technology

School of Engineering

Electrical Engineering Department

M.Tech. In Electrical Engineering (PowerElectronics, Machines & Drives)

Major Project Part - I

CERTIFICATE

This is to certify that the M.Tech Major Project Report entitled "Design of Automotive

Parts Inspection Assembly Line Including Rigs-Quality" submitted by Ms. Dhruvika

Baria (18MEEP02) towards the partial fulfillment of the requirements for the award of

degree in Master of Technology (Electrical Engineering) in the field of Power Electronics,

Machines & Drives of Nirma University is the record of work carried out by her under

our supervision and guidance. The work submitted has in our opinion reached a level

required for being accepted for examination. The results embodied in this major project

work to the best of our krnowledge have not been submitted to any other University or

Institution for award of any degree or diploma.

Date: 7-7-'20

/ 20

lomtho Institute Guide Industrial Guide

Mr. PranavKumar Patel Prof. Tejas H. Panchal

Manager-Quality Engineering Department of Electrical Engineering

MG Motor India Pvt Ltd. Institute of Technology

Halol Nirma University, Ahmedabad

Head of Department Additional Director

Dr. S.C. Vora Dr. R.N. Patel

Department of Electrical Engineering School of Engineering

Institute of Technology Institute of Technology

Nirma University Nirma University

Ahmedabad Ahmedabad

MG MORRIS GARAGES

Sinca 1924

To Whomsoever It May Concern

rify that Miss Dhruvika Baria, from Institute of Technology, Nirma University with a s is t afidr eo. 18MEEPO2, has completed internship in MG Motor India Ltd at Halol. The duration of the

internthip was 27th May 2019 to 30th April 2020. However, due to the COVID-19 pandemic, her 1G1 has been extended till 30h June 2020.

uring ernship program, she has completed her project titled "Design of Automotive Parts i spectio m Assembly Line including Rigs Quality" under the guidance of Mr. Pranav Patel of Quality

department.

During the internship period, we found she was sincere and hardworking.

We wish her well in all her future endeavours.

Yeshwinder Patial Director- HR

MG Motor india Pvt Ltd

Date: 22 June 2020

Place: Halol

MG MOTOR INDIA PRIVATE LIMITED Plant GIDC Industnal Estate. Halal. Dist. Panchmahal. Gujarat 189351, Inda

rporte & Regd Ofice 10th Floor, Milestone Experion Centre. Sector 15, Part-. Gurgaon. Hary1na 122001, Indta el9 2676 3020001 CIN U4100HR 2017FTCO72429 1Emait nlo@mgmotor co in I Web www.mgmotor co in

CERTIFICATE

This is to certify that the Major Project Report entitled, "Design and Analysis of Permanent Magnet Synchronous Motor", submitted by Mr. Parth J. Doshi (18MEEP03), towards the partial fulfillment of the requirements for the award of degree in Master of Technology (Electrical Engineering) in the field of Power Electronics, Machines & Drives of Nirma University, is the record of work carried out by him under our su-

pervision and guidance. The work submitted has in our opinion, reached a

level required for being accepted for examination. The results embodied in this major project work to the best of our knowledge have not been submitted to any other University or Institution for award of any degree or diploma.

Date:

Industry-Guide Institute-Guide

Mr. Sanjay Mahagaokar Group General Manager Rotomotive Powerdrives

Prof. Amit N. Patel Assistant Professor

Institute of Technology Nirma University India Ltd.

Anand Ahmedabad

-

Head of Department Department of Electrical Engineering

Institute of TechnologY Nirma University

Additional Director School of Engineering

Institute of Technology Nirma University

Ahmedabad Ahmedabad

Rotomotive Powerdrives India Ltd. (ttalan Joint Venturo company)

M

CIN: U31103GI2006PLCO48638 Rogd. Offico. 223, Napa Talpad, Gana-Borsad Road, Tal. Borsad, Anand, Gujarat - 388 560, INDIA

[email protected] rO motive fouerdaive www.rotomotivo.com

Tel: +91 9227110010/20/30 June 14, 2020

CERTIFICATE OF PROJECT TRAINING

NAME OF THE TRAINEE Mr. Parth Jayeshbhai Doshi

QUALIFICATIiON M. Tech in Electrical Engineering (Power Electronics,

Machines and Drives)

NAME OF THE INSTITUTE Institute of Technology, Nirma University

DESIGNATION Project Trainee

PROJECT DURATION 15.07.2019 to 30.04.2020

DETAILS OF PROJECI

Design and Analysis of Permanent Magnet Synchronous Motor

PROFICIENCY SHOWN BY THE TRAINEE

Regular He has good knowledge about PMSM design. He has very

good proficiency in FEA softwares such as MotorSolve and

ATTENDANCE

PRACTICAL ABILITIES/

REMARKS Magnet. He is sincere and hardworking.

We wish him all the best for his future endeavors.

For, ROTOMOTIVE PoWERDRIVES INDI� LIMITED

Mr. Batuk Dave

DGM- HR & Admin

CERTIFICATE

This is to certify that the Major Project Report entitled "Design of Three Phase, 400 Hz Powver

Supply using Three Level T-Type Topology and It's Reliability Analysis" submitted by

Ms. Gayatri Kher (18MEEP04) towards the partial fulfillment of the requirement for the award

of degree in Master of Technology (Electrical Engincering) in the ficld of Power Electronics,

Machines and Drives of Nirma University is the record of work carried out by her under our

supervision and guidance. The work submitted has in our opinion reached a level required for

being accepted for examination. The results embodied in this major project work to the best of

our knowledge have not been submitted to any other University or Institution for award of any

degree or diploma.

Institute-Guide Industry-Guide Mr. Vinod Patel Dr. M.T. Shah

DGM (R & D), Amtech Electonics (India) Ltd., E-6, G.I.D.C., Electronics Zone,

Department of Electrical Engineering, Institute of Technology.

Nirma University,Ahmedabad-382481. Sector 25, Gandhinagar-382044.

u Additional Director Head of Department

Department of Electrical Engineering, Institute of Technology,

Nirma University.

School of Engineering, Institute of Technology.

Nirma University Ahmedabad-38248 1.

Ahmedabad-382481

AUTECH ELECTVONICS (NDA) ED E4,1D Eirius Zra, Caruaza 27 UB, u na) AMTECH EtirdsrDncries.co mA=neteeris

To whomsoever it May Concern

This is to certify that Miss. GAYATRIDEVI R. KHER (13MEEPO4), studemt of

M.Tech in Electrical Engineering (Power electronics, machine and drives) from

Institute of Technology, Nirma University worked in Amtech Electronics (India)

Limited, Gandhinagar as a project trainee during July 2019 to April 2020. During

this period she has worked on "Design of Three Phase, 400 Hz Power Supply

using Three Level T-Type Topology and It's Reliability Analysis", under my

supervision.

She has successfully completed her project work with utmost dedication and

high level of engineering and analytical competence.

e wish her all the best for her future endeavours.

Mr. Vinod Patel Date: C3/05/2020

DGM (R&D) Amtech Electronics (India) Ltd.

E-6, G.I.D.C. Electronics Zone,. Gandhinagar.

ANSO SOi: 2008 COPANY bbhistiny

20 DRIVE FOR SUCCESS5

i

CERTIFICATE

This is to certify that the Major Project Report entilted ”SiC based High Efficient 180

Watt Power Supply for AC Drive Application” submitted by Mr. Mahendra Raghuraj

Gupta (18MEEP05) towards the partial fulfillment of the requirements for the award of degree

in Master of Technology (Electrical Engineering) in the field of Power Electronics, Machines&

Drives of Nirma University is the record of work carried out by him/her under our supervision

and guidance. The work submitted has in our opinion reached a level required for being accepted

for examination. The results embodied in this major project work to the best of our knowledge

have not been submitted to any other University or Institution for award of any degree or

diploma. Date:

Signature of Industry Guide Signature of Institute GuideMr. Vijendra Kharbikar Dr. Siddharthsingh K. ChauhanManager Development R&D Department of Electrical EngineeringCG Power and Industrial Solutions Ltd Institute of TechnologyBhopal Nirma UniversityMadhya Pradesh Ahmedabad

Head of Department- CG Head of Department- NUMr. Vivek Niraj Prof. Dr. S.C.VoraDrives R&D Department of Electrical EngineeringCG Power and Industrial Solutions Ltd Institute of TechnologyBhopal Nirma UniversityMadhya Pradesh Ahmedabad

Additional DirectorDr. R.N.Patel

School of EngineeringInstitute of Technology

Nirma UniversityAhmedabad

Administrator

Placed Image

Administrator

Placed Image

Administrator

Placed Image

Administrator

Placed Image

CG Power and Industrial Solutions Limited Drives and Automation Division : Industrial Systems Plot No. 9, MPAKVN PHase 2, New Industrial Area, Mandideep 462 046, Madhya Pradesh, India 1.91 7480 426 400 .91 7480 426 415b

Smart solutions Sirong relalionships.

CERTIFICATE

This is w cerity that the Major Project Report entitled "SiC bascd High Efficient 180 Watt Power Supply for AC Drive Application" submitted by Mr. Mahendra Raghuraj Gupta (18MEEPO5) towards the partial tultillment of the requirements tor the award of degree in Master of Technology (Electrical L'ngineering) in the field of Power Electronics, Machines & Drives of Nirma University is the record of uurk carried ou by kim/her under our supervision and guidanee. The work submitled has in our opinion reacheda leve! iequired forbeing accepted for examination. The results embodied in this major project work to the best of our knowledge have not been submitted to any other University or Insútution for award of ny degree or diploma.

Vj 24 202

Signuiure oflIndustry Guide Mr. Vijedra Kharbikar

Manager Development R&D Power and Industrial Soluions I.td

Signature of nstitute Guide Dr. Siddharthsingh K. Chauhan

Department of Electrical Engineering CG Institute of Technology

Nima liniversity Bhopat Madhya Pradesh

Ahmedabad

Ilead of Depakment- CG

Sold ivek Niraj Dris R&RD

Per and Industrial Soiutions Lid

nopai daa Pradesh

Head of Department-NU Prof. Dr. S.C.Vora

Department of Electrical Engineering Institute of Technology

Nima UniversityAhmedabad

Additional Director Dr. R.N.Patel

School of Engineering Institute ofTechnology

Nimaniversity Registered Otfice CG House, 6th Floor, Dr Annie Besant Road, Worli, Mumbai (90391ndia

+91 22 2423 7777 F: +91 22 2423 7733 W: www.cgglobalt.comdabaa Corporate ldentity Number: L99999MH1937PLCO02641

CERTIFICATE

This is to certify that the Major Project Report entilted "Design and Development of

Multiple Output, Low-Noise Space Qualified DG-DC Converter with Emphasis on

Miniaturization and Performance Optimization" submitted by Mr. Meet Devendra

Pandya (18MEEP06) towards the partial fulfilment of the requirements for the award of

degree in Master of Technology (Electrical Engineering) in the feld of Power Electronics

Machine and Drives Engineering at Nirma University is the record of work carried out by him

under our supervision and guidance. The work submitted has in our opinion reached a level

required for being accepted for examination. The result embodied in this major project work

to the best of our knowledge have not been submitted to any other University or Institute

for award of any degree or diploma.

Date: Aakanera

Industrial Guide Industrial Co-Guide

Mr. Jiten Bhatt Ms. Anjali Kaneria

SCI/ENGR, 'SF" SCI/ENGR, 'SC

SPSD/SEG/SEDA Department SPSD/SEG/SEDA Department

SAC, ISRO, Ahmedabad SAC, ISR0, Ahmedabad

CB.RL Institute-Guide Head of Department

Prof. Chanakya Bhatt Dr. S C Vora

Department of Electrical Engineering Department of Electrical Engineering


Nirma University, Ahmedabad Nirma University, Ahmedabad

Additional Director



Nirma University Ahmedabad

Government of India Department of Space SPACE APPLICATIONS CENTRE

37844T9T-380 015. (4Ta)

T4TT91-79-26913, 26913060 qua: www.sac.isro.gov.inw sac.gov.in

Ambawadi Vistar P.O. Ahmedabad 380 015. (INDIA)

Telephone:491-79-26913050, 26913060 website: www.sac.isro.gov.inlwrw.sac.govin

June 02, 2020

CERTIFICATE OF PRACTICAL TRAINING

MEET DEVENDRA PANDYA Name of Stu dent

NIRMA INSTITUTE OF TECHNOLOGY, Name of the

Institution AHMEDABAD

Period of Tra.ning 09/07/2019 to 29/05/2020

Division where SEDA/SEG/SPSD Training was taken

DETAILS OF TRAINING

"DESIGN AND DEVELOPMENT OF MULTIPLE OUTPUT, LOW-NOISE SPACE

QUALIFIED DC-DC CONVERTER WITH EMPHASIS ON MINIATURIZATION

AND PERFORMANCE OPTIMIZATION"

PROFICIENCY SHOWN BY THE CANDIDATE

Attendance Regular

He has good knowledge about DC-DC converters.

He has good proficiency in Pspice & Candence s/w

tools. He is sincere and hardworking.

Practical Ability/ Remarks

Ravisatkar) Head, HRDDD

Tru satzr zqiTa dUTA aIndian Space Research Organisation

CERTIFICATE

This is to certity that the Major Project Report entilted "Mechanical Parameter Estimation of

Three Phase Induction Motor Using VFD" submitted by Mr. Jay D. Mistry (18MEEPO7) to-

wards the fulfillment of the requirement for the award of degrec in Master of Technology(Electrical

Engineering) in the field of Power Electronics, Machines and Drives in Nirma University is the

cord of work camied out by him under our supervision and guidance. The work submitted has

in my opinion reached a level required for being accepted for examination. The results embodied

in this work is to the best of our knowledge huve not been submitted to any other University or

Institute for award of any degree or diploma.

Date:

A Industry Guide Institute Guide

Mr. Vinod Patel Dr. P.N. Tekwani

DGM(R &D Department) Professor,

AMTECH ELECTRONICS (INDIA) ltd. Department of Electrical Engineering.

Gandhinagar Institute of Technology,

Nirma University

Head of Department Institute Co-Guide

Dr. S.C. Vora Prof. C.H. Raval

Professor and Head, Assistant Professor,

Department of Electrical Engineering. Department of Electrical Engineering

Institute of Technology. Institute of Technology,


AUnona Dhect GOf, 1TNr

AMTECH ELECTRONICS (INDIA) LTD E-6,G.I.D.C. Electronics Zone, Gandhinagar-302 020, Gujarat (India

Ph:91-79-29209101/02/03 Fox: 91:79-232891T E-mall: infogDamtechelectronlcs.com www.antecholectronic.com AMTECH


This is to certify that Mr. JAY D MISTRY (18MEEP07), student of M.Tech in

Electrical, Engineering (Power electronics, machine and drives) from Institute of

Technology, Nirma University worked in Amtech Electronics (India) Limited,

Gandhinagar as a project trainee during July 2019 to April 2020. During this

period he has worked on "Mechanical Parameter Estimation of Three Phase

Induction Motor Using VFD", under my supervision.

He has successfully completed his project work with utmost dedication and


We wish him all the best for his future endeavours.

Mr. Vinod Patel Date: 09/05/2020 DGM (R&D)

Amtech Electronics (India) Ltd. E-6, G.1.D.C. Electronics Zone,

Gandhinagar.

AN ISO 9001: 2008 COMPANY elebraling

+30: s0 BUREAU VERITAS Certticalen

DRIVE FOR SUCCESS

i

CERTIFICATE

This is to certify that the Major Project Report entilted "Functionality testing of low

voltage drive using Automated Test Pramework" submitted by Mr. Preet Parikh

(18MEEPo8) towards the partial fulâllment of requirement for the award of Master of

Technology (Electrieal Engineering) in the field of Power Electronics,Machines and Drives

of Nirma University is the record of work carried out by him under our supervision and

guidance. The work submitted has in my opinion reached a level required for being accepted

forexamination. The resultsembodiedin this major project worktothe bestofourknowledge have not been submitted to any other University or Institution for award of any degree or

diploma. Date:

Industry-Guide Institute -Guide

Mr.NageshJ Prof P.N Kapil

R&D Associate engineer Assistant Professor

MODR Department Institute ofTechnology

ABB GISPL Nirma University

Bangalore Ahmedabad


Department of Electrical Engineering8 School of Engineering

Institute of Technology Institute ofTechnology


Ahmedabad Ahmedabad

ABB


This is to certify that Mr. Preet Parikh, from Institute of Technology Nirma university with a bonafide no. 18MEEP08, has completed Internship in ABB Global Industries and Services Private Limited at Bhoruka Tech Park, Bangalore, in partial fulfillment of the University course requirements from 15th June 2019 to 15th May 2020.

During the internship program, he completed a project titled "Functionality testing of low voltage drive using Automated Test Framework" under the guidance of Mr. Nagesh J, MODR divisicn. The project involved working and understanding of Automated Test Framework (ATF) used for functional testing of low voltage drives and how it is more effective and beneficial compared to manual testing and their outcomes.

During the Internship period, we found he was sincere and hard working. We wish him well in all his future endeavors.

For ABB Global Industries & Services private Limited.

Sd/ Taji Kuruvilla R&D Dept Manager- Motions

Sd/- Shareen Fatima Head HR-GISPL

AB Gobal Industries and Services Private Limited CIN: U72200KA2001PTCO32179 Registered Office and Corporate Office Phone +9180 2294 9150 54 Block No. 1, Bhoruka Tech Park Mahadevapura, Whitefeld Road Bengaluru-560 048

21st Floor, World Trade Center Fax+91 80 2294 9148 Brigade Gateway, No 26/1 Dr Rajkumar Road, Malleshwaram West www.abb.com/in Bengaluru -560 055

Phone: +91 80 6757 9950 Fax :+9180 6757 9999

CERTIFICATE

This is to certify that the Major Project Report entitled Implementation of Sensorless Vector

Control for PMSM Drive subnitted by Mr. SACHINKUMAR R. PATEL (18MEEP10 ) to-

wards towards the partial fulfilment of the requirements for the award of degree in Master of Tech-

nology (Eleetrical Engineering) in the ficld of Power Electronics. Machines and Drives of Nirma

University is the record of work carried out by him under our supervision and guidance. The work

subitted has in our opinion reached a level required for being accepted for examination. The re-

sults embodicd in this major project work to the best of our knowledge have not been submitted to

any other University or Institution for award of any degree or diploma..

Date:

Mr. Vinod Patel Prof. Chanakya B. Bhatt Industry Guide DGM. Research and Development, Amtech Electronics India Limited,

Institute Guide Assistant Professor,

Electrical Engineering Institute of Technology, Nirma University, Ahmedabad ( Gujarat)

Gandhinagar ( Gujarat)

Prof.(Dr.) R. N. Patel Additional Director,

Prof. (Dr.) S. C. Vora

Head of Department,

Electrical Engineering Institute od Technology. Nirma University Ahmedabad ( Gujarat)

School of Enginnering

Institute of Technology.

Nirma University, Ahmedabad (Gujarat )

AMTECH ELECTRONICS (INDIA) LTD E-6, GLD.C Electronics Zone, Gandhinagar-382 028, Gujarat (India) Ph:-91-79-23289101/ 02/ 03. Fax.91-79-2328911 E-mai [email protected] www.amtechelectronicS.com AMTECH


This is to certify that Mr. SACHINKUMAR R. PATEL (18MEEP10), student of M.Tech in Electrical Engineering (Power electronics, machine and drives) from

Institute of Technology, Nirma University worked in Amtech Electronics (India) Limited, Gandhinagar as a project trainee during July 2019 to April 2020. During this period he has worked on "lmplementation of Sensorless Vector Control

for PMSM Drive", under my supervision.


high level of engineering and analytical competence We wish him all the best for his future endeavours.

Mr. Vinod Patel Date: 9/05/2020

DGM (R&D) Amtech Electronics (India) Ltd. E-6, G.1.D.C. Electronics Zone,

Gandhinagar.

AN ISO 9001: 2008 COMPANY

olebraling 30 erthc

iccess DRIVE FOR SUCCESs

CERTIFICATE

This is to certify that the Summer Training entilted Development of Driver Card to Drive Sic

MOSFET/IGBT at 100kHz submitted by Mr. Ujaskumar Patel (18MEEP11) towards the ful-

filment in Summer training (M.Tech Power Electronics Machine and Drives Engineering) at Nirma


submitted has in my opinion reached a level required for being accepted for examination. The re-

sults embodied in major project work to the best of my knowledge have not been submitted to any

other University or Institute.

Prof. Annima Gupta

Assistant Professor Electrical Engineering. Institute of Technology. Nirma University.

Ahmedabad ( Gujarat)

Mr. Vinod Patcl Industry Guide

DGM. Rescarch and Development. Amtech Electronics India Limited. Gandhinagar ( Gujarat)

Dr. S.C Vora Dr. R. N. Patel Head of Department,

Electrical Engineering. Institute of Technology. Nirma University

Ahmedabad (Gujarat)

Additional Director, School of Enginnering

Institute of Technology, Nirma University, Ahmedabad ( Gujarat )

AMTECH ELECTRONICS (INDIA) LTD.

E&GIDCEectroncs Zane Ganchinagar 382 078 Cujarat lns Fh.91-79 232S901/ 02/ 03 Fax .91-79-2328911

& mal [email protected] antechelecroscom AMTECH


This is to certify that Mr. UJASKUMAR ROHITBHAI PATEL (18MEEP11), student of M.Tech in Electrical Engineering (Power electronics, machine and drives) from Institute of Technology, Nirma University worked in Amtech Electronics (India) Limited, Gandhinagar as a project trainee during July 2019 to April 2020. During this period he has worked on "Development of Driver Card to Drive Sic

MOSFET/IGBT at 100kHz", under my supervision.




Mr. Vinod Patel Date:09/05/2020 DGM (R&D) Amtech Electronics (India) Ltd. E-6, G.1.D.c. Electronics Zone,

Gandhinagar.

olebvaliny AN ISO 9001: 2008 COMPANY

30 s LREL VERNT

NABCB

DRIVE FOR SUCCESS

CERTIFICATE

This is to certify the M.Tech Major Project Report entitled " Improvement of Automotive

Lightings and Wiring Harnesses Commodity Parts " submitted by Ms. Shivani Rathod

(18MEEP12) towards the partial fulfillment of the requirements for the award of degree in

Master of Technology (Electrical Engineering) in the field of Power Electronics, Machines

& Drives of Nirma University is the record of work carried out by her under our super-

vision and guidance. The work submitted has in our opinion reached a level required for

being accepted for examination. The results embodied in this major project work to the

best of our knowledge have not been submitted to any other University or Institution for

award of any degree or diploma.

Date: 0 -o4- 20

Industrial Guide Institute Guide

Mr. Sharwan Karwa Prof. Akhilesh Panwar

Manager-Supplier Quality Engineering Department of Electrical Engineering



Head of Department

Dr. S.C. Vora Additional Director




Ahmedabad Ahmedabad

MORRIS SARAGES

SInce 1924


This is to certify that Miss Shivani Rathod, from Institute of Technology, Nirma University with a

bonafide no. 18MEEP12, has completed internship in MG Motor India Ltd at Halol. The duration of the

int:nship was 27th May 2019 to 30th April 2020. However, due to the COVID-19 pandemic, her

intensp al toias been extended till 30h June 2020.

During the interiip program, she has completed her project titled "Improvement of Automotive Lightings aWiring Harnesses Commodity Pats" under the guidance of Mr. Sharwan Kharwa of SQE

departme he project report has been submitted and reviewed.



Yeshwinder Patial

Director- HR

MG Motor India Pvt Ltd

Date: 22 June 2020

Place: Halol

MG MOTOR INDIA PRIVATE LIMITED

Plant: GIDC Industrial Estate., Halol, Dist Panchmahal. Gujarat 389351. Indta Corporate &Regd Ofice: 10th Floor, Milestone Experion Centre, Sector 15. Part-il. Gurgaon. Haryana- 122001. India Tel: +91 2676 302000 I CIN UJ4100HR2017ETCo72429 1 E-mall: info@mgmotor co in I Web: www.mgmotor.co.in

Certificate

This is to certify that the Project Report entitled "Design of Permanent Magnet

Motor for Automotive Applications" submitted by Miss, Rashmi Meena (18MEEP15),

towards the partial fulfillment of the requirements for the award of degree of Master

of Technology in Power Electronics, Machines and Drives of University is the record of

work carried out by him under our supervision and guidance. The work submitted has

in our opinion reached a level required for being accepted for cxamination. The results

embodied in this project work to the best of our knowledge have not been submitted to

any other University or Institution for avard of any degree or diploma.

Prof. Amit N. Patel

Project Guide

Assistant Professor

Department of Electrical Engineering


Nirma University

Ahmedabad

Head Of Department Additional Director

Departient of Electrical Engineering School of Eugineering

stitnte of Technology Iustitute of Tecnology

Nimna University Nirma University

Ahmedabad Ahmedabad

Nirma University



Electrical Engineering Department

M.Tech. In Electrical Engineering (PowerElectronics, Machines & Drives)

Major Project Part - II

CERTIFICATE

This is to certify that the M.Tech Major Project Report entitled "Design of Automotive

Parts Inspection Assembly Line Including Rigs-Quality" submitted by Ms. Dhruvika

Baria (18MEEP02) towards the partial fulfillment of the requirements for the award of

degree in Master of Technology (Electrical Engineering) in the field of Power Electronics,

Machines & Drives of Nirma University is the record of work carried out by her under

our supervision and guidance. The work submitted has in our opinion reached a level

required for being accepted for examination. The results embodied in this major project

work to the best of our krnowledge have not been submitted to any other University or

Institution for award of any degree or diploma.

Date: 7-7-'20

/ 20

lomtho Institute Guide Industrial Guide

Mr. PranavKumar Patel Prof. Tejas H. Panchal

Manager-Quality Engineering Department of Electrical Engineering




Dr. S.C. Vora Dr. R.N. Patel




Ahmedabad Ahmedabad

MG MORRIS GARAGES

Sinca 1924


rify that Miss Dhruvika Baria, from Institute of Technology, Nirma University with a s is t afidr eo. 18MEEPO2, has completed internship in MG Motor India Ltd at Halol. The duration of the

internthip was 27th May 2019 to 30th April 2020. However, due to the COVID-19 pandemic, her 1G1 has been extended till 30h June 2020.

uring ernship program, she has completed her project titled "Design of Automotive Parts i spectio m Assembly Line including Rigs Quality" under the guidance of Mr. Pranav Patel of Quality

department.



Yeshwinder Patial Director- HR

MG Motor india Pvt Ltd

Date: 22 June 2020

Place: Halol

MG MOTOR INDIA PRIVATE LIMITED Plant GIDC Industnal Estate. Halal. Dist. Panchmahal. Gujarat 189351, Inda

rporte & Regd Ofice 10th Floor, Milestone Experion Centre. Sector 15, Part-. Gurgaon. Hary1na 122001, Indta el9 2676 3020001 CIN U4100HR 2017FTCO72429 1Emait nlo@mgmotor co in I Web www.mgmotor co in

CERTIFICATE

This is to certify that the Major Project Report entitled, "Design and Analysis of Permanent Magnet Synchronous Motor", submitted by Mr. Parth J. Doshi (18MEEP03), towards the partial fulfillment of the requirements for the award of degree in Master of Technology (Electrical Engineering) in the field of Power Electronics, Machines & Drives of Nirma University, is the record of work carried out by him under our su-

pervision and guidance. The work submitted has in our opinion, reached a

level required for being accepted for examination. The results embodied in this major project work to the best of our knowledge have not been submitted to any other University or Institution for award of any degree or diploma.

Date:

Industry-Guide Institute-Guide

Mr. Sanjay Mahagaokar Group General Manager Rotomotive Powerdrives

Prof. Amit N. Patel Assistant Professor

Institute of Technology Nirma University India Ltd.

Anand Ahmedabad

-

Head of Department Department of Electrical Engineering

Institute of TechnologY Nirma University

Additional Director School of Engineering

Institute of Technology Nirma University

Ahmedabad Ahmedabad

Rotomotive Powerdrives India Ltd. (ttalan Joint Venturo company)

M

CIN: U31103GI2006PLCO48638 Rogd. Offico. 223, Napa Talpad, Gana-Borsad Road, Tal. Borsad, Anand, Gujarat - 388 560, INDIA

[email protected] rO motive fouerdaive www.rotomotivo.com

Tel: +91 9227110010/20/30 June 14, 2020

CERTIFICATE OF PROJECT TRAINING

NAME OF THE TRAINEE Mr. Parth Jayeshbhai Doshi

QUALIFICATIiON M. Tech in Electrical Engineering (Power Electronics,

Machines and Drives)

NAME OF THE INSTITUTE Institute of Technology, Nirma University

DESIGNATION Project Trainee

PROJECT DURATION 15.07.2019 to 30.04.2020

DETAILS OF PROJECI

Design and Analysis of Permanent Magnet Synchronous Motor

PROFICIENCY SHOWN BY THE TRAINEE

Regular He has good knowledge about PMSM design. He has very

good proficiency in FEA softwares such as MotorSolve and

ATTENDANCE

PRACTICAL ABILITIES/

REMARKS Magnet. He is sincere and hardworking.

We wish him all the best for his future endeavors.

For, ROTOMOTIVE PoWERDRIVES INDI� LIMITED

Mr. Batuk Dave

DGM- HR & Admin

CERTIFICATE

This is to certify that the Major Project Report entitled "Design of Three Phase, 400 Hz Powver

Supply using Three Level T-Type Topology and It's Reliability Analysis" submitted by

Ms. Gayatri Kher (18MEEP04) towards the partial fulfillment of the requirement for the award

of degree in Master of Technology (Electrical Engincering) in the ficld of Power Electronics,

Machines and Drives of Nirma University is the record of work carried out by her under our

supervision and guidance. The work submitted has in our opinion reached a level required for

being accepted for examination. The results embodied in this major project work to the best of

our knowledge have not been submitted to any other University or Institution for award of any

degree or diploma.

Institute-Guide Industry-Guide Mr. Vinod Patel Dr. M.T. Shah

DGM (R & D), Amtech Electonics (India) Ltd., E-6, G.I.D.C., Electronics Zone,

Department of Electrical Engineering, Institute of Technology.

Nirma University,Ahmedabad-382481. Sector 25, Gandhinagar-382044.

u Additional Director Head of Department

Department of Electrical Engineering, Institute of Technology,

Nirma University.

School of Engineering, Institute of Technology.

Nirma University Ahmedabad-38248 1.

Ahmedabad-382481

AUTECH ELECTVONICS (NDA) ED E4,1D Eirius Zra, Caruaza 27 UB, u na) AMTECH EtirdsrDncries.co mA=neteeris


This is to certify that Miss. GAYATRIDEVI R. KHER (13MEEPO4), studemt of

M.Tech in Electrical Engineering (Power electronics, machine and drives) from

Institute of Technology, Nirma University worked in Amtech Electronics (India)

Limited, Gandhinagar as a project trainee during July 2019 to April 2020. During

this period she has worked on "Design of Three Phase, 400 Hz Power Supply

using Three Level T-Type Topology and It's Reliability Analysis", under my

supervision.

She has successfully completed her project work with utmost dedication and


e wish her all the best for her future endeavours.

Mr. Vinod Patel Date: C3/05/2020

DGM (R&D) Amtech Electronics (India) Ltd.

E-6, G.I.D.C. Electronics Zone,. Gandhinagar.

ANSO SOi: 2008 COPANY bbhistiny

20 DRIVE FOR SUCCESS5

i

CERTIFICATE

This is to certify that the Major Project Report entilted ”SiC based High Efficient 180

Watt Power Supply for AC Drive Application” submitted by Mr. Mahendra Raghuraj

Gupta (18MEEP05) towards the partial fulfillment of the requirements for the award of degree

in Master of Technology (Electrical Engineering) in the field of Power Electronics, Machines&

Drives of Nirma University is the record of work carried out by him/her under our supervision

and guidance. The work submitted has in our opinion reached a level required for being accepted

for examination. The results embodied in this major project work to the best of our knowledge

have not been submitted to any other University or Institution for award of any degree or

diploma. Date:

Signature of Industry Guide Signature of Institute GuideMr. Vijendra Kharbikar Dr. Siddharthsingh K. ChauhanManager Development R&D Department of Electrical EngineeringCG Power and Industrial Solutions Ltd Institute of TechnologyBhopal Nirma UniversityMadhya Pradesh Ahmedabad

Head of Department- CG Head of Department- NUMr. Vivek Niraj Prof. Dr. S.C.VoraDrives R&D Department of Electrical EngineeringCG Power and Industrial Solutions Ltd Institute of TechnologyBhopal Nirma UniversityMadhya Pradesh Ahmedabad

Additional DirectorDr. R.N.Patel

School of EngineeringInstitute of Technology

Nirma UniversityAhmedabad

Administrator

Placed Image

Administrator

Placed Image

Administrator

Placed Image

Administrator

Placed Image

CG Power and Industrial Solutions Limited Drives and Automation Division : Industrial Systems Plot No. 9, MPAKVN PHase 2, New Industrial Area, Mandideep 462 046, Madhya Pradesh, India 1.91 7480 426 400 .91 7480 426 415b

Smart solutions Sirong relalionships.

CERTIFICATE

This is w cerity that the Major Project Report entitled "SiC bascd High Efficient 180 Watt Power Supply for AC Drive Application" submitted by Mr. Mahendra Raghuraj Gupta (18MEEPO5) towards the partial tultillment of the requirements tor the award of degree in Master of Technology (Electrical L'ngineering) in the field of Power Electronics, Machines & Drives of Nirma University is the record of uurk carried ou by kim/her under our supervision and guidanee. The work submitled has in our opinion reacheda leve! iequired forbeing accepted for examination. The results embodied in this major project work to the best of our knowledge have not been submitted to any other University or Insútution for award of ny degree or diploma.

Vj 24 202

Signuiure oflIndustry Guide Mr. Vijedra Kharbikar

Manager Development R&D Power and Industrial Soluions I.td

Signature of nstitute Guide Dr. Siddharthsingh K. Chauhan

Department of Electrical Engineering CG Institute of Technology

Nima liniversity Bhopat Madhya Pradesh

Ahmedabad

Ilead of Depakment- CG

Sold ivek Niraj Dris R&RD

Per and Industrial Soiutions Lid

nopai daa Pradesh

Head of Department-NU Prof. Dr. S.C.Vora

Department of Electrical Engineering Institute of Technology

Nima UniversityAhmedabad

Additional Director Dr. R.N.Patel

School of Engineering Institute ofTechnology

Nimaniversity Registered Otfice CG House, 6th Floor, Dr Annie Besant Road, Worli, Mumbai (90391ndia

+91 22 2423 7777 F: +91 22 2423 7733 W: www.cgglobalt.comdabaa Corporate ldentity Number: L99999MH1937PLCO02641

CERTIFICATE

This is to certify that the Major Project Report entilted "Design and Development of

Multiple Output, Low-Noise Space Qualified DG-DC Converter with Emphasis on

Miniaturization and Performance Optimization" submitted by Mr. Meet Devendra

Pandya (18MEEP06) towards the partial fulfilment of the requirements for the award of

degree in Master of Technology (Electrical Engineering) in the feld of Power Electronics

Machine and Drives Engineering at Nirma University is the record of work carried out by him

under our supervision and guidance. The work submitted has in our opinion reached a level

required for being accepted for examination. The result embodied in this major project work

to the best of our knowledge have not been submitted to any other University or Institute

for award of any degree or diploma.

Date: Aakanera

Industrial Guide Industrial Co-Guide

Mr. Jiten Bhatt Ms. Anjali Kaneria

SCI/ENGR, 'SF" SCI/ENGR, 'SC

SPSD/SEG/SEDA Department SPSD/SEG/SEDA Department

SAC, ISRO, Ahmedabad SAC, ISR0, Ahmedabad

CB.RL Institute-Guide Head of Department

Prof. Chanakya Bhatt Dr. S C Vora

Department of Electrical Engineering Department of Electrical Engineering


Nirma University, Ahmedabad Nirma University, Ahmedabad

Additional Director



Nirma University Ahmedabad

Government of India Department of Space SPACE APPLICATIONS CENTRE

37844T9T-380 015. (4Ta)

T4TT91-79-26913, 26913060 qua: www.sac.isro.gov.inw sac.gov.in

Ambawadi Vistar P.O. Ahmedabad 380 015. (INDIA)

Telephone:491-79-26913050, 26913060 website: www.sac.isro.gov.inlwrw.sac.govin

June 02, 2020

CERTIFICATE OF PRACTICAL TRAINING

MEET DEVENDRA PANDYA Name of Stu dent

NIRMA INSTITUTE OF TECHNOLOGY, Name of the

Institution AHMEDABAD

Period of Tra.ning 09/07/2019 to 29/05/2020

Division where SEDA/SEG/SPSD Training was taken

DETAILS OF TRAINING

"DESIGN AND DEVELOPMENT OF MULTIPLE OUTPUT, LOW-NOISE SPACE

QUALIFIED DC-DC CONVERTER WITH EMPHASIS ON MINIATURIZATION

AND PERFORMANCE OPTIMIZATION"

PROFICIENCY SHOWN BY THE CANDIDATE

Attendance Regular

He has good knowledge about DC-DC converters.

He has good proficiency in Pspice & Candence s/w

tools. He is sincere and hardworking.

Practical Ability/ Remarks

Ravisatkar) Head, HRDDD

Tru satzr zqiTa dUTA aIndian Space Research Organisation

CERTIFICATE

This is to certity that the Major Project Report entilted "Mechanical Parameter Estimation of

Three Phase Induction Motor Using VFD" submitted by Mr. Jay D. Mistry (18MEEPO7) to-

wards the fulfillment of the requirement for the award of degrec in Master of Technology(Electrical

Engineering) in the field of Power Electronics, Machines and Drives in Nirma University is the

cord of work camied out by him under our supervision and guidance. The work submitted has

in my opinion reached a level required for being accepted for examination. The results embodied

in this work is to the best of our knowledge huve not been submitted to any other University or

Institute for award of any degree or diploma.

Date:

A Industry Guide Institute Guide

Mr. Vinod Patel Dr. P.N. Tekwani

DGM(R &D Department) Professor,

AMTECH ELECTRONICS (INDIA) ltd. Department of Electrical Engineering.

Gandhinagar Institute of Technology,

Nirma University

Head of Department Institute Co-Guide

Dr. S.C. Vora Prof. C.H. Raval

Professor and Head, Assistant Professor,

Department of Electrical Engineering. Department of Electrical Engineering

Institute of Technology. Institute of Technology,


AUnona Dhect GOf, 1TNr

AMTECH ELECTRONICS (INDIA) LTD E-6,G.I.D.C. Electronics Zone, Gandhinagar-302 020, Gujarat (India

Ph:91-79-29209101/02/03 Fox: 91:79-232891T E-mall: infogDamtechelectronlcs.com www.antecholectronic.com AMTECH


This is to certify that Mr. JAY D MISTRY (18MEEP07), student of M.Tech in

Electrical, Engineering (Power electronics, machine and drives) from Institute of

Technology, Nirma University worked in Amtech Electronics (India) Limited,

Gandhinagar as a project trainee during July 2019 to April 2020. During this

period he has worked on "Mechanical Parameter Estimation of Three Phase

Induction Motor Using VFD", under my supervision.




Mr. Vinod Patel Date: 09/05/2020 DGM (R&D)

Amtech Electronics (India) Ltd. E-6, G.1.D.C. Electronics Zone,

Gandhinagar.

AN ISO 9001: 2008 COMPANY elebraling

+30: s0 BUREAU VERITAS Certticalen

DRIVE FOR SUCCESS

i

CERTIFICATE

This is to certify that the Major Project Report entilted "Functionality testing of low

voltage drive using Automated Test Pramework" submitted by Mr. Preet Parikh

(18MEEPo8) towards the partial fulâllment of requirement for the award of Master of

Technology (Electrieal Engineering) in the field of Power Electronics,Machines and Drives

of Nirma University is the record of work carried out by him under our supervision and

guidance. The work submitted has in my opinion reached a level required for being accepted

forexamination. The resultsembodiedin this major project worktothe bestofourknowledge have not been submitted to any other University or Institution for award of any degree or

diploma. Date:

Industry-Guide Institute -Guide

Mr.NageshJ Prof P.N Kapil

R&D Associate engineer Assistant Professor

MODR Department Institute ofTechnology

ABB GISPL Nirma University

Bangalore Ahmedabad


Department of Electrical Engineering8 School of Engineering

Institute of Technology Institute ofTechnology


Ahmedabad Ahmedabad

ABB


This is to certify that Mr. Preet Parikh, from Institute of Technology Nirma university with a bonafide no. 18MEEP08, has completed Internship in ABB Global Industries and Services Private Limited at Bhoruka Tech Park, Bangalore, in partial fulfillment of the University course requirements from 15th June 2019 to 15th May 2020.

During the internship program, he completed a project titled "Functionality testing of low voltage drive using Automated Test Framework" under the guidance of Mr. Nagesh J, MODR divisicn. The project involved working and understanding of Automated Test Framework (ATF) used for functional testing of low voltage drives and how it is more effective and beneficial compared to manual testing and their outcomes.

During the Internship period, we found he was sincere and hard working. We wish him well in all his future endeavors.

For ABB Global Industries & Services private Limited.

Sd/ Taji Kuruvilla R&D Dept Manager- Motions

Sd/- Shareen Fatima Head HR-GISPL

AB Gobal Industries and Services Private Limited CIN: U72200KA2001PTCO32179 Registered Office and Corporate Office Phone +9180 2294 9150 54 Block No. 1, Bhoruka Tech Park Mahadevapura, Whitefeld Road Bengaluru-560 048

21st Floor, World Trade Center Fax+91 80 2294 9148 Brigade Gateway, No 26/1 Dr Rajkumar Road, Malleshwaram West www.abb.com/in Bengaluru -560 055

Phone: +91 80 6757 9950 Fax :+9180 6757 9999

CERTIFICATE

This is to certify that the Major Project Report entitled Implementation of Sensorless Vector

Control for PMSM Drive subnitted by Mr. SACHINKUMAR R. PATEL (18MEEP10 ) to-

wards towards the partial fulfilment of the requirements for the award of degree in Master of Tech-

nology (Eleetrical Engineering) in the ficld of Power Electronics. Machines and Drives of Nirma


subitted has in our opinion reached a level required for being accepted for examination. The re-

sults embodicd in this major project work to the best of our knowledge have not been submitted to

any other University or Institution for award of any degree or diploma..

Date:

Mr. Vinod Patel Prof. Chanakya B. Bhatt Industry Guide DGM. Research and Development, Amtech Electronics India Limited,

Institute Guide Assistant Professor,

Electrical Engineering Institute of Technology, Nirma University, Ahmedabad ( Gujarat)

Gandhinagar ( Gujarat)

Prof.(Dr.) R. N. Patel Additional Director,

Prof. (Dr.) S. C. Vora

Head of Department,

Electrical Engineering Institute od Technology. Nirma University Ahmedabad ( Gujarat)

School of Enginnering

Institute of Technology.

Nirma University, Ahmedabad (Gujarat )

AMTECH ELECTRONICS (INDIA) LTD E-6, GLD.C Electronics Zone, Gandhinagar-382 028, Gujarat (India) Ph:-91-79-23289101/ 02/ 03. Fax.91-79-2328911 E-mai [email protected] www.amtechelectronicS.com AMTECH


This is to certify that Mr. SACHINKUMAR R. PATEL (18MEEP10), student of M.Tech in Electrical Engineering (Power electronics, machine and drives) from

Institute of Technology, Nirma University worked in Amtech Electronics (India) Limited, Gandhinagar as a project trainee during July 2019 to April 2020. During this period he has worked on "lmplementation of Sensorless Vector Control

for PMSM Drive", under my supervision.


high level of engineering and analytical competence We wish him all the best for his future endeavours.

Mr. Vinod Patel Date: 9/05/2020

DGM (R&D) Amtech Electronics (India) Ltd. E-6, G.1.D.C. Electronics Zone,

Gandhinagar.

AN ISO 9001: 2008 COMPANY

olebraling 30 erthc

iccess DRIVE FOR SUCCESs

CERTIFICATE

This is to certify that the Summer Training entilted Development of Driver Card to Drive Sic

MOSFET/IGBT at 100kHz submitted by Mr. Ujaskumar Patel (18MEEP11) towards the ful-

filment in Summer training (M.Tech Power Electronics Machine and Drives Engineering) at Nirma


submitted has in my opinion reached a level required for being accepted for examination. The re-

sults embodied in major project work to the best of my knowledge have not been submitted to any

other University or Institute.

Prof. Annima Gupta

Assistant Professor Electrical Engineering. Institute of Technology. Nirma University.

Ahmedabad ( Gujarat)

Mr. Vinod Patcl Industry Guide

DGM. Rescarch and Development. Amtech Electronics India Limited. Gandhinagar ( Gujarat)

Dr. S.C Vora Dr. R. N. Patel Head of Department,

Electrical Engineering. Institute of Technology. Nirma University

Ahmedabad (Gujarat)

Additional Director, School of Enginnering

Institute of Technology, Nirma University, Ahmedabad ( Gujarat )

AMTECH ELECTRONICS (INDIA) LTD.

E&GIDCEectroncs Zane Ganchinagar 382 078 Cujarat lns Fh.91-79 232S901/ 02/ 03 Fax .91-79-2328911

& mal [email protected] antechelecroscom AMTECH


This is to certify that Mr. UJASKUMAR ROHITBHAI PATEL (18MEEP11), student of M.Tech in Electrical Engineering (Power electronics, machine and drives) from Institute of Technology, Nirma University worked in Amtech Electronics (India) Limited, Gandhinagar as a project trainee during July 2019 to April 2020. During this period he has worked on "Development of Driver Card to Drive Sic

MOSFET/IGBT at 100kHz", under my supervision.




Mr. Vinod Patel Date:09/05/2020 DGM (R&D) Amtech Electronics (India) Ltd. E-6, G.1.D.c. Electronics Zone,

Gandhinagar.

olebvaliny AN ISO 9001: 2008 COMPANY

30 s LREL VERNT

NABCB

DRIVE FOR SUCCESS

CERTIFICATE

This is to certify the M.Tech Major Project Report entitled " Improvement of Automotive

Lightings and Wiring Harnesses Commodity Parts " submitted by Ms. Shivani Rathod

(18MEEP12) towards the partial fulfillment of the requirements for the award of degree in

Master of Technology (Electrical Engineering) in the field of Power Electronics, Machines

& Drives of Nirma University is the record of work carried out by her under our super-

vision and guidance. The work submitted has in our opinion reached a level required for

being accepted for examination. The results embodied in this major project work to the

best of our knowledge have not been submitted to any other University or Institution for

award of any degree or diploma.

Date: 0 -o4- 20

Industrial Guide Institute Guide

Mr. Sharwan Karwa Prof. Akhilesh Panwar

Manager-Supplier Quality Engineering Department of Electrical Engineering



Head of Department

Dr. S.C. Vora Additional Director




Ahmedabad Ahmedabad

MORRIS SARAGES

SInce 1924


This is to certify that Miss Shivani Rathod, from Institute of Technology, Nirma University with a

bonafide no. 18MEEP12, has completed internship in MG Motor India Ltd at Halol. The duration of the

int:nship was 27th May 2019 to 30th April 2020. However, due to the COVID-19 pandemic, her

intensp al toias been extended till 30h June 2020.

During the interiip program, she has completed her project titled "Improvement of Automotive Lightings aWiring Harnesses Commodity Pats" under the guidance of Mr. Sharwan Kharwa of SQE

departme he project report has been submitted and reviewed.



Yeshwinder Patial

Director- HR

MG Motor India Pvt Ltd

Date: 22 June 2020

Place: Halol

MG MOTOR INDIA PRIVATE LIMITED

Plant: GIDC Industrial Estate., Halol, Dist Panchmahal. Gujarat 389351. Indta Corporate &Regd Ofice: 10th Floor, Milestone Experion Centre, Sector 15. Part-il. Gurgaon. Haryana- 122001. India Tel: +91 2676 302000 I CIN UJ4100HR2017ETCo72429 1 E-mall: info@mgmotor co in I Web: www.mgmotor.co.in

Certificate

This is to certify that the Project Report entitled "Design of Permanent Magnet

Motor for Automotive Applications" submitted by Miss, Rashmi Meena (18MEEP15),

towards the partial fulfillment of the requirements for the award of degree of Master

of Technology in Power Electronics, Machines and Drives of University is the record of

work carried out by him under our supervision and guidance. The work submitted has

in our opinion reached a level required for being accepted for cxamination. The results

embodied in this project work to the best of our knowledge have not been submitted to

any other University or Institution for avard of any degree or diploma.

Prof. Amit N. Patel

Project Guide

Assistant Professor

Department of Electrical Engineering


Nirma University

Ahmedabad

Head Of Department Additional Director

Departient of Electrical Engineering School of Eugineering

stitnte of Technology Iustitute of Tecnology

Nimna University Nirma University

Ahmedabad Ahmedabad

nirma university institute of technology school of ......m.tech in electrical engineering (power...

Documents