Download - HEMPEL Decorative Eng

Product DataManual

HEMPEL

Product Data Sheet

Issued: November 2009 Page 1 of 1

PRODUCT DATA SHEETS

NUMERICAL INDEX

DECORATIVE PAINTS

Product No. Product Name Date

02350 TRATAMIENTO FONDO……...…………………………............. November 2008 02450 HEMPEL’S WOOD STAIN…………………………………….…….. October 2006 02500 HEMPEL’S COLOUR VARNISH………………………………….…. October 2006 05250 HEMPEL’S PARQUET VARNISH……………………………………. October 2006 05570 HEMPEL'S P/U LACQUER…………………………………………..0ctober 2006 05990 HEMPEL’S EPOXY SEALER…………………………………..……. October 2006 06600 HEMPEL’S BINDER/SEALER ……………………….………..……. October 2006 09810 HEMPEL’S BINDER/SEALER………………………………………. October 2006 22460 HEMPEL’S ALKYD UNDERCOAT………………………………...… October 2006 26600 HEMPEL’S CONTEX SEALER ………………………………….…… October 2006 26630 HEMPEL’S ACRYLIC PRIMER/SEALER……………………….…… October 2006 28600 HEMPEL’S CONTEX PRIMER W/B……...………………...………. October 2006 28830 HEMPEL’S PRIMER/SEALER………..……………………….……. October 2006 35230 HEMPEL’S EPOXY FILLER….…………………………..…….……. October 2006 36610 HEMPEL’S FILLER………………………………..………….……… October 2006 38820 HEMPEL’S INTERIOR FILLER………………………………………. October 2006 38830 HEMPEL’S EXTERIOR FILLER……………………………….……… October 2006 38860 HEMPEL’S SPATTER FINISH ………………………………………. October 2006 38900 HEMPEL’S ACRYLIC FILLER ………………………………………. October 2006 45450 HEMPEL’S EPOXY TEXTURE ………………………………………. October 2006 46600 HEMPEL’S CONTEX SMOOTH……………………………………… October 2006 48600 HEMPEL’S CONTEX SMOOTH W/B……………………………..… October 2006 48740 HEMPEL’S SMOOTH TEXTURE……………………………….……. October 2006 52040 HEMPEL’S GLOSS ENAMEL ………………………………………. October 2006 52060 HEMPEL’S FLAT ENAMEL…. …………………………….………… October 2006 52080 HEMPEL’S SEMI-GLOSS ENAMEL………………………………….October 2006 52410 HEMPEL’S METALLIC PAINT ……………………………….……… October 2006 52940 HEMPALUX® GLOSS……….……………………………….……… October 2006 52980 HEMPALUX®SEMI-GLOSS… ……………………………….……… October 2006 55100 HEMPATHANE®ENAMEL……………………………….………….. October 2006 55210 HEMPATHANE®TOPCOAT….………………………..….……… September 2006 56360 HEMPATEX®ENAMEL……………………………….……………… October 2006 56610 HEMPEL’S CONTEX FINE…. ……………………………….……… October 2006 56620 HEMPEL’S CONTEX MEDIUM……………………………….………October 2006 58100 HEMUCRYL®ENAMEL…… ……………………………….……… October 2006 58230 HEMUCRYL®TOPCOAT HI-BUILD……………………….….……… October 2006 58260 HEMPEL’S ACRYLIC SILK EMULSION……………………..……… October 2006 58270 HEMPEL’S NON-DRIP ACRYLIC EMULSION……………….……… October 2006 58330 HEMPEL’S SILK EMULSION ……………………………….……… October 2006 58410 HEMPEL’S CONTRACT EMULSION………………………...……… October 2006 58440 HEMPEL’S WALL VARNISH…………………………………… November 2009 58470 HEMPEL’S WALLART…………………………….……………….… October 2006 58540 HEMPEL’S SILK TEXTURE. ……………………………….……… October 2006 58610 HEMPEL’S INTERIOR EMULSION……………………….….……… October 2006 58650 HEMPEL’S GLOSS EMULSION………………………….….……… October 2006 58660 HEMPEL’S RUSTIK-2……………………………….…….………… October 2006 58670 HEMPEL’S RUSTIK-3……………………………….…….………… October 2006 58680 HEMPEL’S RUSTIK-5……………………………….…….………… October 2006 58710 HEMPEL’S FLAT EMULSION……………………….………….…… October 2006 58720 HEMPEL’S ACRYLIC EMULSION…………………………………… October 2006 58770 HEMPEL’S SUPER FINE TEXTURE………………….……………… October 2006 58810 HEMPEL’S ROOF COATING……………………………..….……… October 2006 58840 HEMPEL’S MULTI TEXTURE……………………………….….……. October 2006 58850 HEMPEL’S FINE TEXTURE……………………………….…………. October 2006 58860 HEMPEL’S MEDIUM TEXTURE…………………………………..….October 2006 58870 HEMPEL’S COARSE TEXTURE……………………………………… October 2006 58910 HEMPEL’S ACRYLIC EMULSION…………………………………… October 2006

Product DataProduct Data

Product Data Sheet

HEMPEL


TRATAMIENTO FONDO 02350

Description: TRATAMENTO FONDO 02350 is a transparent wood preservative based on modified alkyd. Good penetration into new and old wood. The product contains biocide to prevent growth of fungus and mould and UV filter to reduce the degrading effect of the sunlight.

Area of use: Wooden structures. Substrates: Wood. PHYSICAL CONSTANTS:

Colours/Shade nos: Transparent/00000 Finish: Flat Volume solids, %: 10 ± 1 Theoretical spreading rate: Not relevant (see REMARKS below) Flash point: 43°C Specific gravity: 0.8 kg/litre Dry to touch: 8 hours (20°C) The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are

subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

APPLICATION DETAILS: Application method: Brush Dipping Thinner (max. vol.): None None Cleaning of tools: THINNER 08230 or 08110 Recoat interval, min: 24 hours (20°C) (see REMARKS below) Recoat interval, max: None Surface condition: The surface should be stable, firm, dry and free of contaminants like dust, dirt, oil,

grease and fungus. Remarks: TRATAMENTO FONDO02350 should be applied wet-on-wet until full saturation is

obtained. Wipe off any excess material to avoid a glossy surface after drying. The consumption will depend on the ability of the wood to absorb the preservative, but a guideline for practical coverage will be 3-5 m

2/litre in the case of rough wood and 4-6

m2/litre in the case of dressed wood. TRATAMENTO FONDO02350 is most effectively

applied by brush. Cut ends should, if possible, be dipped. Drying data is given on the assumption that proper ventilation is provided. Recoating with products dissolved in white spirit may take place after 24 hours (20°C). For optimum protection against sunlight, recoat with HEMPEL'S WOODSTAIN 02450.

Note: TRATAMENTO FONDO 02350 is for professional use only.

Safety: Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas.

ISSUED BY: HEMPEL A/S - 0235000000CS003

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, see “Explanatory Notes” in the HEMPEL Book. Data, specifications, directions and recommendations given in this data sheet represent only test results or experience obtained under controlled or specially defined circumstances. Their accuracy, completeness or appropriateness under the actual conditions of any intended use of the Products herein must be determined exclusively by the Buyer and/or User. The Products are supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in writing. The Manufacturer and Seller disclaim, and Buyer and/or User waive all claims involving, any liability, including but not limited to negligence, except as expressed in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising from the use of the Products as recommended above, on the overleaf or otherwise. Product data are subject to change without notice and become void five years from the date of issue.


Product Data SheetHEMPEL

Issued: October 2006 Page 1 of 1

HEMPEL'S WOOD STAIN 02450 Description: HEMPEL'S WOOD STAIN 02450 is a durable modified alkyd-based wood stain for

protection of all types of wood. The product contains biocides to prevent growth of fungus and mould. Contains UV filter to reduce the degrading effect of the sunlight.

Area of use: Wooden structures. Substrates: Wood. PHYSICAL CONSTANTS: Colours/Shade nos: Teak/08563 or according to HEMPEL's colour card Finish: Flat Volume solids, %: 36 ± 1 Theoretical spreading rate: Not relevant (see REMARKS below) Flash point: 42°C Specific gravity: 0.9 kg/litre Dry to touch: 8 hours (20°C) The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are

subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1. APPLICATION DETAILS: Application method: Brush Dipping Thinner (max. vol.): None None Cleaning of tools: THINNER 08230 or 08110 (20%) THINNER 08230 or 08110 (20%) Recoat interval, min: 8 hours (20°C) Recoat interval, max: None Surface condition: The surface should be stable, firm, dry and free of contaminants like dust, sand, loose

old paint, dirt, oil, grease and algae. The moisture content of the wood should not exceed 16 %. Avoid cleaning or grinding of the surface with steel wool or similar as this may cause rust stains.

Wood preserver: New wood (except teak and vacuum impregnated wood) and bare spots of previously

treated wood should be saturated with HEMPEL'S WOOD PRESERVATIVE 02350. Remarks: Do not apply under humid conditions or at temperatures below 5°C. The consumption will depend on the ability of the wood to absorb HEMPEL'S WOOD

STAIN 02450, but a guideline for practical coverage is 5-10 m2/litre in the case of rough and absorbing wood and 10 -20 m2/litre in the case of dressed wood.

Certain hard wood types may require thinning up to 20% to ensure proper penetration. HEMPEL'S WOOD STAIN 02450 is most effectively applied by brush. Drying data is

given on the assumption that proper ventilation is provided. Apply 1 or more coats to obtain the desired colour and a uniform appearance. Different colours will be obtained depending on the type of wood and the ability of the wood to absorb the material.

Please note that the shade becomes darker after repeated treatment. Note: HEMPEL'S WOOD STAIN 02450 is for professional use only. Safety: Handle with care. Before and during use, observe all safety labels on packaging and

paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas.






HEMPEL'S COLOUR VARNISH 02500 Description: HEMPEL'S COLOUR VARNISH 02500 is a quick-drying, clear urethane varnish. The

product is available in many attractive colours and is used for interior and exterior decoration of wood. Contains UV filter to reduce the degrading effect of the sunlight.

Area of use: Interior and Exterior: Windows and door frames, skirting, furniture, etc. Substrates: Wood. PHYSICAL CONSTANTS: Colours/Shade nos: Red/08569 or according to HEMPEL's colour card Finish: Glossy Volume solids, %: 46 ± 1 Theoretical spreading rate: 18.4 m²/litre - 25 micron* Flash point: 38°C Specific gravity: 0.9 kg/litre Dry to touch: 3 hours (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry

film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate and the relevant consumption factor.

The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are

subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1. APPLICATION DETAILS: Application method: Flat varnish brush Thinner (max. vol.): 1st coat (20%) 2nd coat (10%) 3rd coat (None) Cleaning of tools: THINNER 08230 or 08110 Indicated film thickness, dry: 25 micron Indicated film thickness, wet: 50 micron Recoat interval, min: 6 hours (20°C) Recoat interval, max: None Surface condition: The surface should be stable, firm, dry and free of contaminants like dust, old paint,

dirt, oil, grease and algae. The moisture content of the wood should not exceed 16 %. Wood preserver: New wood (except teak and vacuum impregnated wood) and bare spots of previously

treated wood should be saturated with HEMPEL'S WOOD PRESERVATIVE 02350. Remarks: Do not apply under humid conditions or at temperatures below 5°C. Drying data is given on the assumption that proper ventilation is provided. Apply one or

more coats to obtain the desired colour and a uniform appearance. When the desired colour is obtained, apply HEMPEL'S COLOUR VARNISH 02500 until the required finish and protection is achieved. A total of four coats is normally required on new wood, depending on the wood type.

As the product is partly transparent, the resulting colour will depend on the type and colour of the wood.

Note: HEMPEL'S COLOUR VARNISH 02500 is for professional use only. Safety: Handle with care. Before and during use, observe all safety labels on packaging and







HEMPEL'S PARQUET VARNISH 05250

Description: HEMPEL'S PARQUET VARNISH 05250 is a one-component moisture curing, clear

polyurethane varnish. The product is easy to apply and has good adhesion to wood. It gives a flexible but hard glossy surface, resistant to normal wear on wooden floors. It

is ideal in kitchens and other areas where spillage of foodstuff and domestic cleaning agents may occur.

Area of use: Interior: New or previously varnished parquet floors and other wooden items such as

stairs, handrails, windows, doors, etc. Substrates: Wood. PHYSICAL CONSTANTS: Colours/Shade nos.: Transparent/00000 Finish: Glossy Volume solids, %: 35 ± 1 Theoretical spreading rate: 14.0 m²/litre - 25 micron* Flash point: 26°C Specific gravity: 1.0 kg/litre Dry to touch: 1 hour (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry



subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1. APPLICATION DETAILS: Application method: Flat varnish brush Air Spray Thinner (max. vol.): 08880 (5%) 08880 (5%) Cleaning of tools: THINNER 08880 Indicated film thickness, dry: 25 micron Indicated film thickness, wet: 75 micron Recoat interval, min: 5 hours (20°C) Recoat interval, max.: 48 hours (20°C) Surface condition: The surface should be stable, firm, dry and free of contaminants like dust, loose

varnish, old paint, dirt, oil and grease. The moisture content of the wood should not exceed 16%.

Safety: Handle with care. Before and during use, observe all safety labels on packaging and


Product Data Sheet


HEMPEL'S PARQUET VARNISH 05250

REMARKS: Do not apply under humid conditions or at temperatures below 5°C. Drying data is given on the assumption that proper ventilation is provided. Apply one or more coats

to obtain the desired colour and uniform appearance. To obtain a very smooth finish, light sandpapering between varnish coats is recommended. If maximum recoating interval is exceeded, careful sandpapering of the surface is recommended in order to ensure intercoat adhesion.

Note: HEMPEL'S PARQUET VARNISH 05250 is for professional use only. ISSUED BY: HEMPEL A/S - 0525000000CS001

This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, see “Explanatory Notes” in the HEMPEL Book. Data, specifications, directions and recommendations given in this data sheet represent only test results or experience obtained under controlled or specially defined circumstances. Their accuracy, completeness or appropriateness under the actual conditions of any intended use of the Products herein must be determined exclusively by the Buyer and/or User. The Products are supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in writing. The Manufacturer and Seller disclaim, and Buyer and/or User waive all claims involving, any liability, including but not limited to negligence, except as expressed in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising from the use of the Products as recommended above, on the overleaf or otherwise.





HEMPEL’S P/U LACQUER 05570

BASE 05579 with CURING AGENT 95370 Description: HEMPEL'S P/U LACQUER 05570 is a two-component polyurethane varnish with

excellent gloss retention. The product has excellent scratch and abrasion resistance and is resistant to water, sunlight and adverse weather conditions.

Area of use: Interior and exterior. Substrates: Wood and other substrates. PHYSICAL CONSTANTS: Colours/Shade nos: Transparent/00000 Finish: High-gloss Volume solids, %: 51 ± 1 Theoretical spreading rate: 20 m2/litre - 25 micron* Flash point: 27°C Specific gravity: 1.0 kg/litre Dry to touch: 4-5 hours (20°C) Fully cured: 7 days at 20°C *The theoretical spreading rate has been calculated for the stated volume solids and dry




APPLICATION DETAILS: Mixing ratio for 05570: Base 05579 : Curing agent 95370 5.4 : 1 by volume Application method: Brush/roller Conventional spray Thinner (max. vol.): 08080 (5%) 08080 (25%) Pot life: 12 hours (20°C) / 3 hours (40°C) Cleaning of tools: THINNER 08080 Indicated film thickness, dry: 25 micron Indicated film thickness, wet: 50 micron Recoat interval, min: 8 hours (20°C) Recoat interval, max: 30 days Safety: Handle with care. Before and during use, observe all safety labels on packaging and


Product Data Sheet


HEMPATHANE ENAMEL 05570

SURFACE The surface should be stable, firm, dry and free of contaminants like dust, sand, loose old paint, PREPARATION: laitance, dirt, oil, grease and algae. The moisture content of the wood should not exceed 16%.

Avoid cleaning or grinding of the surface with steel wool or similar as this may cause rust stains. APPLICATION CONDITIONS: When using brush for application, always brush off in the same direction as the grain. Light sanding with fine grinded sand paper in between coats is recommended. REMARKS: Drying data is given on the assumption that proper ventilation is provided. High humidity and/or

condensation during application and the following 16 hours (20°C/68°F) may adversely affect the film formation. When applying HEMPEL'S P/U LACQUER 05570 by spray, thinning is recommended to obtain the best possible finish. The necessary amount of thinning will depend on the actual conditions.

Curing agent 95370 is sensitive to moisture. Store in a dry place and keep cans tightly closed until

use. Open cans with caution due to possible high pressure. Even small traces of water in the mixed paint will reduce pot life and result in film defects.

Note: HEMPATHANE ENAMEL 05570 is for professional use only. ISSUED BY: HEMPEL A/S - 0557000000CS003






HEMPEL'S EPOXY SEALER 05990 BASE 05999 with CURING AGENT 95040

Description: HEMPEL'S EPOXY SEALER 05990 is a two-component polyamide cured epoxy

binder/sealer for porous substrates not previously coated. Has a low viscosity and excellent penetration properties. Also for use under epoxy/polyurethane coating systems.

Area of use: Interior and exterior: Foundations, floors, walls and ceilings. Substrates: Concrete, masonry, cement rendering, gypsum boards, etc. PHYSICAL CONSTANTS: Colours/Shade nos: Transparent/00000 Finish: Flat (when penetration into substrate has taken place) Volume solids, %: 29 ± 1 Theoretical spreading rate: Not relevant (see REMARKS below) Flash point: 25°C Specific gravity: 0.93 kg/litre Dry to touch: 10 hours (10°C) 4 hours (20°C) 1 hour (40°C) The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are


APPLICATION DETAILS: Mixing ratio for 05990: Base 05999 : Curing agent 95040 4 : 1 by volume Application method: Brush Airless spray Thinner (max.vol.): 08450 (5%) 08450 (5%) Cleaning of tools: THINNER 08450 Pot life: 8 hours (20°C) Recoat interval, min: 10 hours (10°C) 4 hours (20°C) 1 hour (40°C) Recoat interval, max: None None None Surface condition: The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance,

dirt, grease and oil. Remarks: Use only where application and curing can proceed at temperatures above 10°C. A theoretical spreading rate cannot be calculated. For practical purposes, approximately

10 m²/litre is indicated depending on the surface roughness, porosity of the concrete, extent of thinning and application method. The sealer is intended to saturate the surface - any surplus to be removed, preferably when the sealer is still wet. Drying data is given on the assumption that proper ventilation is provided.

Note: HEMPEL'S EPOXY SEALER 05990 is for professional use only. Safety: Handle with care. Before and during use, observe all safety labels on packaging and


ISSUED BY: HEMPEL A/S - 0599000000CO005





HEMPEL'S BINDER/SEALER 06600 Description: HEMPEL'S BINDER/SEALER 06600 is a well penetrating, clear acrylic product with

water-proofing properties for old stone and masonry. For this purpose, two coats are often necessary.

As a binder/sealer for porous substrates such as concrete, plaster and whitewashed surfaces.

For use under solvent-borne as well as water-borne coating systems. Area of use: Interior and exterior: Walls, ceilings, partitions etc. Substrates: Concrete, masonry, cement rendering, plaster, stone and white-washed surfaces, etc. PHYSICAL CONSTANTS: Colours/Shade nos: Transparent/00000 Finish: Glossy Volume solids, %: 20 ± 1 Theoretical spreading rate: Not relevant (see REMARKS below) Flash point: 38°C Specific gravity: 0.8 kg/litre Dry to touch: 15 minutes (20°C) The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are


APPLICATION DETAILS: Application method: Brush/roller Conventional spray Airless spray Thinner (max.vol.): 08230 (50%) 08230 (50%) 08230 (50%) Cleaning of tools: THINNER 08230 Recoat interval, min: 30 minutes (20°C) Recoat interval, max: None Surface condition: The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance,

dirt, grease and oil. Remarks: A theoretical spreading rate cannot be calculated. For practical purposes, approximately

10 m²/litre is indicated depending on the surface roughness, the porosity of the concrete, the extent of thinning and the application method. When the product is used as a sealer, it is intended to saturate the surface - any surplus to be removed, preferably when the sealer is still wet.

Drying data given is on the assumption that proper ventilation is provided. Note: HEMPEL'S BINDER/SEALER 06600 is for professional use only. Safety: Handle with care. Before and during use, observe all safety labels on packaging and







HEMPEL'S BINDER/SEALER 09810 Description: HEMPEL'S BINDER/SEALER 09810 is an economic water-borne acrylic binder/sealer

with good penetrating and dust binding properties. For use under solvent-borne as well as water-borne coating systems. Area of use: Interior and exterior: Walls, ceilings, partitions, etc. Substrates: Concrete, masonry, cement rendering, plaster, wood, etc. PHYSICAL CONSTANTS: Colour/Shade nos: Transparent/00000 Finish: Semi-flat Volume solids, %: 27 ± 1 Theoretical spreading rate: Not relevant (see REMARKS below) Flash point: > 93°C Specific gravity: 1.0 kg/litre Dry to touch: 2 hours (10°C) 1 hour (20°C) 30 minutes (40°C) The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are

subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1. APPLICATION DETAILS: Application method: Brush/roller Conventional spray Thinner (max. vol.): Fresh water (10%) Fresh water (5%) Cleaning of tools: Fresh water Recoat interval, min: 4 hours (10°C) 2 hours (20°C) 1 hour (40°C) Recoat interval, max: None None None Surface condition: The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance,

dirt, grease and oil. Remarks: Use only when application and drying can proceed at temperatures above 5°C,

preferably above 10°C and relative humidity below 85%. A theoretical spreading rate cannot be calculated. For practical purposes, approximately

10 m²/litre is indicated depending on the surface roughness, the porosity of the concrete, the extent of thinning and the application method. The sealer is intended to saturate the surface - any surplus to be removed, preferably when the sealer is still wet.

Drying data given is on the assumption that proper ventilation is provided. Note: HEMPEL'S BINDER/SEALER 09810 is for professional use only. Safety: Handle with care. Before and during use, observe all safety labels on packaging and







HEMPEL'S ALKYD UNDERCOAT 22460 Description: HEMPEL'S ALKYD UNDERCOAT 22460 is an alkyd intermediate coat for steel work and

a primer for non-metallic surfaces. Area of use: As an interior and exterior primer and intermediate coat in alkyd systems. Substrates: Woodwork, timber, fibre-board, sealed masonry surfaces in dry rooms and primed

steelwork. PHYSICAL CONSTANTS: Colours/Shade nos: White/10000 Finish: Flat Volume solids, %: 54 ± 1 Theoretical spreading rate: 13.8 m²/litre - 40 micron* Flash point: 42°C Specific gravity: 1.4 kg/litre Dry to touch: 5 hours (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry

film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the

substrate, and the relevant consumption factor. The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are

subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1. APPLICATION DETAILS: Application method: Brush/roller Conventional spray Airless spray Thinner (max.vol.): 08230 or 08110 (5%) 08230 (15%) 08230 (5%) Cleaning of tools: THINNER 08230 or 08110 Indicated film thickness dry: 40 micron indicated film thickness wet: 75 micron Recoat interval, min: 10 hours (10°C) 5 hours (20°C) 3 hours (40°C) Recoat interval, max: None Surface condition: The surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt,

grease and oil. It is recommended to apply HEMPEL'S ALKYD UNDERCOAT 22460 prior to the specified filling procedure.

Filling: HEMPEL'S ACRYLIC FILLER 38900. Remarks: Drying data given is on the assumption that proper ventilation is provided. Note: HEMPEL'S ALKYD UNDERCOAT 22460 is for professional use only.








HEMPEL'S CONTEX SEALER 26600 Description: HEMPEL'S CONTEX SEALER 26600 is an alkali resistant, acrylic primer/sealer.

Excellent penetration and dust binding properties on mineral substrates. Especially developed for use in HEMPEL'S CONTEX anticarbonation systems. Area of use: Exterior: Walls. Substrates: Concrete, masonry, cement rendering, asbestos, etc. PHYSICAL CONSTANTS: Colours/Shade nos: White/10000 Finish: Flat Volume solids, %: 29 ± 1 Theoretical spreading rate: 9.7 m2/litre - 30 micron* Flash point: 41°C Specific gravity: 1.1 kg/litre Dry to touch: 2 hours (10°C) 1 hour (20°C) 30 minutes (40°C) *The theoretical spreading rate has been calculated for application on a primed and

smooth surface. The actual rates may differ significantly as the sealer is intended to be applied on rough and porous substrates. The actual rates will also depend on the extent of thinning, the application method and the relevant consumption factor.



APPLICATION DETAILS: Application method: Airless spray Brush/roller Thinner (max. vol.): 08080 (15%) 08080 (15%) Nozzle orifice: .017"-.021" Nozzle pressure: 100 bar/1450 psi (Airless spray data are indicative and subject to adjustment) Cleaning of tools: THINNER 08080 Recoat interval, min: 2 hours (10°C) 1 hour (20°C) 30 minutes (40°C) Recoat interval, max: None Surface condition: The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance,

dirt, grease and oil. Remarks: Drying data is given on the assumption that proper ventilation is provided. Note: HEMPEL'S CONTEX SEALER 26600 is for professional use only. Safety: Handle with care. Before and during use, observe all safety labels on packaging and


ISSUED BY: HEMPEL A/S - 2660010000CR004





HEMPEL'S ACRYLIC PRIMER/SEALER 26630 Description: HEMPEL'S ACRYLIC PRIMER/SEALER 26630 is a solvent-borne alkali resistant acrylic

primer/sealer with excellent penetration and dust binding properties. For use under solvent-borne as well as under water-borne coatings.

Area of use: Interior and exterior: Walls, ceilings, partitions, etc. Substrates: Concrete, masonry, cement rendering, plaster, gypsum, wood, etc. PHYSICAL CONSTANTS: Colour/Shade nos: White/10000 Finish: Flat Volume solids, %: 33 ± 1 Theoretical spreading rate 11.0 m2/litre - 30 micron* Specific gravity: 1.1 kg/litre Dry to touch: 2 hours (10°C) 1 hour (20°C) 30 minutes (40°C) Flash point: 43°C *The spreading rate has been calculated theoretically for application onto a primed and

smooth surface. The actual rates may differ significantly as the primer/sealer is intended to be applied to rough and porous substrates. The actual rates will also depend on the extent of thinning, the application method and the relevant consumption factor.



APPLICATION DETAILS: Application method: Brush/roller Conventional spray Thinner (max. vol.): 08080 (15%) 08080 (30%) Cleaning of tools: THINNER 08080 Recoat interval, min: 2 hours (10°C) 1 hour (20°C) 30 minutes (40°C) Recoat interval, max: None None None Surface condition: The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance,

dirt, grease and oil. Remarks: Drying data given is on the assumption that proper ventilation is provided. Note: HEMPEL'S ACRYLIC PRIMER/SEALER 26630 is for professional use only. Safety: Handle with care. Before and during use, observe all safety labels on packaging and







HEMPEL'S CONTEX PRIMER W/B 28600 Description: HEMPEL'S CONTEX PRIMER W/B 28600 is an alkali resistant waterborne acrylic

primer/sealer in HEMPEL’S CONTEX anticarbonation system. Excellent penetration and dust binding properties on mineral substrates. Area of use: Exterior: Walls Substrates: Concrete, masonry, cement rendering etc. PHYSICAL CONSTANTS: Colours/Shade nos.: White/10000 Finish: Flat Volume solids, %: 26 ± 1 Theoretical spreading rate: 8.7 m2/litre - 30 micron* Flash point: > 93°C Specific gravity: 1.3 kg/litre Dry to touch: 2 hours (10°C) 1 hour (20°C) 30 minutes (40°C) *The spreading rate has been calculated theoretically for application onto a primed and




APPLICATION DETAILS: Application method: Airless spray Conventional spray Brush/roller Thinner (max. vol.): Fresh water (5%) Fresh water (5%) Fresh water (10%) Nozzle orifice: .021"-.023" Nozzle pressure: 150-180 bar (Airless spray data are indicative and subject to adjustment) Cleaning of tools: Fresh water Recoat interval, minimum: 4 hours (10°C) 2 hours (20°C) 1 hour (40°C) Recoat interval, maximum: None None None Surface condition: The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance,

dirt, grease and oil. Remarks: Use only where application and drying can proceed at temperatures above 5°C,

preferably above 10°C and relative humidity below 85%. Drying data given is on the assumption that proper ventilation is provided. Note: HEMPEL'S CONTEX PRIMER W/B 28600 is for professional use only. Safety: Handle with care. Before and during use, observe all safety labels on packaging and







HEMPEL'S PRIMER/SEALER 28830 Description: HEMPEL'S PRIMER/SEALER 28830 is a pigmented water-borne primer/sealer with

excellent sealing and binding properties. Area of use: Interior and exterior: Walls, ceilings, partitions, etc. Substrates: Concrete, masonry, cement rendering, plaster, etc. PHYSICAL CONSTANTS: Colours/Shade nos: White/10000 Finish: Flat Volume solids, %: 26 ± 1 Theoretical spreading rate: 8.7 m2/litre - 30 micron* Flash point: > 93°C Specific gravity: 1.3 kg/litre Dry to touch: 2 hours (10°C) 1 hour (20°C) 30 minutes (40°C) *The spreading rate has been calculated theoretically for application onto a primed and




APPLICATION DETAILS: Application method: Brush/roller Conventional spray Thinner (max. vol.): Fresh water (10%) Fresh water (5%) Cleaning of tools: Fresh water Recoat interval, minimum: 4 hours (10°C) 2 hours (20°C) 1 hour (40°C) Recoat interval, maximum: None None None Surface condition: The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance,

dirt, grease and oil. Remarks: Use only where application and drying can proceed at temperatures above 5°C,

preferably above 10°C and relative humidity below 85%. Drying data given is on the assumption that proper ventilation is provided. Note: HEMPEL'S PRIMER/SEALER 28830 is for professional use only. Safety: Handle with care. Before and during use, observe all safety labels on packaging and







HEMPEL'S EPOXY FILLER 35230

BASE 35239 with CURING AGENT 95130

Description: HEMPEL'S EPOXY FILLER 35230 is a two-component, high solid epoxy filler. It is a very

hard, impact and chemical resistant material when cured. It can be applied in a dry film thickness of up to 10 mm without cracking. The product is easy to work with and has excellent filling properties. Can be recoated with solvent-borne primers/sealers and is the preferred filler for epoxy and polyurethane systems.

Area of use: As repair filler or levelling compound for interior and exterior areas. Substrates: Concrete, steel and other rigid materials. PHYSICAL CONSTANTS: Colours/Shade nos: Off-white/11630 Finish: Flat Volume solids, %: 98 ± 1 Flash point: 25°C Specific gravity: 2.0 kg/litre Dry to touch: 3 hours (20°C) Ready to sand: 16 hours (20°C) The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are


APPLICATION DETAILS: Mixing ratio for 35230: Base 35239 : Curing agent 95130 3 : 1 by volume Application method: Spatula, broad knife, steel trowel Thinner (max. vol.): Do not dilute (when used as skim coat, 5% THINNER 08450 is recommended) Pot life: 2 hours (20°C) Cleaning of tools: TOOL CLEANER 99610 or THINNER 08450 Recoat interval, min: 24 hours (20°C) Recoat interval, max: 30 days (20°C) (see REMARKS below) Surface condition: The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance,

dirt, grease and oil. It is recommended to apply an epoxy primer/sealer prior to the specified filling procedure.

Remarks: Use only where application and curing can proceed at temperatures above 5°C. The dry

film thickness will be determined by the depth of crevices, blow-holes or the degree of surface irregularities. The practical spreading rate will alter accordingly.

If the maximum recoating interval is exceeded, roughening of the surface is necessary. Note: HEMPEL'S EPOXY FILLER 35230 is for professional use only. Safety: Handle with care. Before and during use, observe all safety labels on packaging and







HEMPEL'S FILLER 36610 Description: HEMPEL'S FILLER 36610 is an acrylic-based filler, thixotropic in appearance and

content. It is a knifing filler which is smooth and easy to apply. The high solids content ensures excellent workability, smoothing and filling properties. Accepts a wide range of solvent and water-borne topcoats.

Area of use: Interior and exterior. Substrates: Concrete, cement rendering, masonry, gypsum boards and wood. PHYSICAL CONSTANTS: Colours/Shade nos: Off-white/11630 Finish: Flat Volume solids, %: 57 ± 1 Theoretical spreading rate: 1.9 m²/litre - 300 micron (when used as a skim coat) (see REMARKS below) Specific gravity: 1.7 kg/litre Flash point: 23°C Dry to touch: 6 hours (10°C)3 hours (20°C) 1½ hours (40°C) Dry to handle: 12 hours (10°C)6 hours (20°C) 3 hours (40°C) Ready to sand: 48 hours (10°C)24 hours (20°C) 12 hours (40°C) The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are


APPLICATION DETAILS: Application method: Spatula, filling knife, steel trowel Cleaning of tools: THINNER 08080 Indicated film thickness, dry: 300 micron Indicated film thickness, wet: 550 micron Recoat interval, min: 8 hours (10°C) 4 hours (20°C) 2 hours (40°C) Recoat interval, max: None None None Surface condition: The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance,

dirt, grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure. Touch-up with primer/sealer on areas repaired with filler can be done prior to application of topcoats.

Remarks: The dry film thickness will be determined by the depth of the crevices, blowholes or the

degree of surface irregularities. The practical spreading rate will be altered accordingly. Drying data is given on the assumption that proper ventilation is provided. Note: HEMPEL'S FILLER 36610 is for professional use only. Safety: Handle with care. Before and during use, observe all safety labels on packaging and







HEMPEL'S INTERIOR FILLER 38820 Description: HEMPEL'S INTERIOR FILLER 38820 is a water-borne, acrylic-based filler with good

smoothing properties. Recoatable with water-borne or solvent-borne coatings. Area of use: Interior; Dry rooms: Walls, ceilings, partitions, etc. Substrates: Concrete, masonry, cement rendering, asbestos, etc. PHYSICAL CONSTANTS: Colours/Shade nos: Off-white/11630 Finish: Flat Volume solids, %: 49 ± 1 Theoretical spreading rate: 2.0 m²/litre - 250 micron (when used as a skim coat) (see REMARKS below) Flash point: > 93°C Specific gravity: 1.7 kg/litre Dry to touch: 8 hours (10°C) 4 hours (20°C) 2 hours (40°C) Ready to sand: 48 hours (10°C ) 24 hours (20°C) 12 hours (40°C) The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are


APPLICATION DETAILS: Application method: Spatula, filling knife, steel trowel Cleaning of tools: Fresh water Indicated film thickness, dry: 250 micron Indicated film thickness, wet: 500 micron Recoat interval, min: 12 hours (10°C) 6 hours (20°C) 3 hours (40°C) Recoat interval, max: None None None Surface condition: The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance,

dirt, grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure. Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of topcoats.

Remarks: Use only where application and drying can proceed at temperatures above 5°C and

relative humidity below 85%. Not recommended in rooms with high humidity such as bathrooms, kitchens, etc. The dry film thickness will be determined by the depth of crevices, blow-holes or the

degree of surface irregularities. The practical spreading rate will alter accordingly. HEMPEL'S INTERIOR FILLER 38820 is not recommended for deep filling. Avoid applying

at excessive film thickness. Drying data given is on the assumption that proper ventilation is provided. Note: HEMPEL'S INTERIOR FILLER 38820 is for professional use only.








HEMPEL'S EXTERIOR FILLER 38830 Description: HEMPEL'S EXTERIOR FILLER 38830 is a water-borne, acrylic-based filler with excellent

smoothing and filling properties. Can be topcoated with water-borne or solvent-borne systems.

Area of use: Interior and exterior: Walls, ceilings, partitions, etc. Substrates: Concrete, masonry, cement rendering, plaster, gypsum boards, etc. PHYSICAL CONSTANTS: Colours/Shade nos: Off-white/11630 Finish: Flat Volume solids, %: 49 ± 1 Theoretical spreading rate: 2.0 m²/litre - 250 micron (when used as a skim coat) (see REMARKS below) Flash point: > 93°C Specific gravity: 1.7 kg/litre Dry to touch: 8 hours (10°C) 4 hours (20°C) 2 hours (40°C) Ready to sand: 48 hours (10°C) 24 hours (20°C) 12 hours (40°C) The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are


APPLICATION DETAILS: Application method: Spatula, filling knife, steel trowel Cleaning of tools: Fresh water Indicated film thickness, dry: 250 micron Indicated film thickness, wet: 500 micron Recoat interval, min: 12 hours (10°C) 6 hours (20°C) 3 hours (40°C) Recoat interval, max: None None None Surface condition: The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance,


Remarks: Use only where application and drying can proceed at temperatures above 5°C,

preferably above 10°C and relative humidity below 85%. The dry film thickness will be determined by the depth of crevices, blow-holes or the

degree of surface irregularities. The practical spreading rate will alter accordingly. Drying data given is on the assumption that proper ventilation is provided. Note: HEMPEL'S EXTERIOR FILLER 38830 is for professional use only.








HEMPEL'S SPATTER FINISH 38860 Description: HEMPEL'S SPATTER FINISH 38860 is a water-borne emulsion coating. The product has non-drip properties. The final appearance is determined by the

application method. Different patterns can be obtained by using different application tools. Overcoating with solvent-borne or water-borne coatings is recommended to obtain best possible finish and wash ability.

-141 Area of use: Interior and exterior: Walls, ceilings, partitions, etc. Substrates: Concrete, cement rendering, plaster, gypsum boards, etc. PHYSICAL CONSTANTS: Colours/Shade nos: White/10000 Finish: Flat Volume solids, %: 50 ± 1 Theoretical spreading rate: 2.0 m²/litre - 250 micron* Flash point: > 93°C Specific gravity: 1.7 kg/litre Dry to touch: 8 hours (10°C) 4 hours (20°C) 2 hours (40°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry




APPLICATION DETAILS: Application method: Conventional spray Hopper gun Air-mix spray Thinner (max. vol.): None None None Cleaning of tools: Fresh water Recoat interval, min: 12 hours (10°C) 6 hours (20°C) 3 hours (40°C) Recoat interval, max: None None None Surface condition: The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance,


Sealing: Transparent: HEMPEL'S BINDER/SEALER 09810 Opaque: HEMPEL'S ACRYLIC PRIMER/SEALER 26630 Remarks: Use only where applicaton and drying can proceed at temperatures above 5°C,

preferably above 10°C and relative humidity below 85%. Other primers or subsequent coats may be specified. Drying data given is on the assumption that proper ventilation is provided. Note: HEMPEL'S SPATTER FINISH 38860 is for professional use only. Safety: Handle with care. Before and during use, observe all safety labels on packaging and







HEMPEL'S ACRYLIC FILLER 38900 Description: HEMPEL'S ACRYLIC FILLER 38900 is a high-grade, flexible water-borne acrylic filler. The

high solids content ensures excellent workability, smoothing and filling properties. Ideal for filling joints in gypsum boards. Can be used as a repair filler or for full skim-

coat application. HEMPEL'S ACRYLIC FILLER 38900 can be overcoated with solvent-borne or water-borne coatings without use of a primer/sealer.

Area of use: Interior and exterior: Walls, ceilings, partitions, etc. Substrates: Concrete, masonry, gypsum boards, plaster, asbestos, wood, etc. PHYSICAL CONSTANTS: Colours/Shade nos: Off-white/11630 Finish: Flat Volume solids, %: 57 ± 1 Theoretical spreading rate: 1.9 m²/litre - 300 micron (when applied as a skim coat)* Flash point: > 93°C Specific gravity: 1.8 kg/litre Dry to touch: 8 hours (10°C) 4 hours (20°C) 2 hours (40°C) Ready to sand: 48 hours (20°C) 24 hours (20°C) 12 hours (40°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry



subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1. APPLICATION DETAILS: Application method: Spatula, filling knife, steel trowel Cleaning of tools: Fresh water Indicated film thickness, dry: 300 micron Indicated film thickness, wet: 525 micron Recoat interval, min: 12 hours (10°C) 6 hours (20°C) 3 hours (40°C) Recoat interval, max: None None None Surface condition: The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance,

dirt, grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure.

Remarks: Use only where applicaton and drying can proceed at temperatures above 5°C,

preferably above 10°C and relative humidity below 85%. Drying data given is on the assumption that proper ventilation is provided. Note: HEMPEL'S ACRYLIC FILLER 38900 is for professional use only. Safety: Handle with care. Before and during use, observe all safety labels on packaging and







HEMPEL'S EPOXY TEXTURE 45450

BASE 45459 with CURING AGENT 95210 Description: HEMPEL'S EPOXY TEXTURE 45450 is a two-component, high-solids epoxy product,

which is specially formulated to be applied by spray to obtain a textured surface with different patterns. When topcoated with polyurethane finishes, a high-grade system, suitable for outdoor exposure is obtained.

Area of use: Interior and exterior: Ceilings and walls. Substrates: Concrete, masonry, cement rendering, plaster, etc. PHYSICAL CONSTANTS: Colours/Shade nos: White/10000 Finish: Flat Volume solids, %: 60 ± 1 Theoretical spreading rate: 6.0 m²/litre - 100 micron* Flash point: 12°C Specific gravity: 1.5 kg/litre Dry to touch: 2 hours (10°C) 1 hour (20°C) 30 minutes (40°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry



subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1. APPLICATION DETAILS: Mixing ratio for 45450: Base 45459 : Curing agent 95210 9 : 1 by volume Application method: Hopper gun Airless spray Thinner (max. vol.): 08450 (5%) 08450 (5%) Cleaning of tools: THINNER 08450 Pot life: 6 hours (10°C) 3 hours (20°C) Recoat interval, min: 2 hours (10°C) 1 hour (20°C) 30 minutes (40°C) Recoat interval, max: None None None Safety: Handle with care. Before and during use, observe all safety labels on packaging and


Product Data Sheet


HEMPEL'S EPOXY TEXTURE 45450

SURFACE The surface should be stable, firm, dry and free of dust, sand loose old paint, laitance, dirt, CONDITION: grease and oil. It is recommended to apply an epoxy primer/sealer prior to the specified filling

procedure. Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of topcoats.

FILLING: HEMPEL'S EPOXY FILLER 35230 SEALING: HEMPEL'S EPOXY SEALER 05990 REMARKS: Use only where application and curing can proceed at temperatures above 5°C. Other sealer/filler types may be specified. Drying data given is on the assumption that proper

ventilation is provided. Note: HEMPEL'S EPOXY TEXTURE 45450 is for professional use only. ISSUED BY: HEMPEL A/S - 4545010000CS004






HEMPEL'S CONTEX®SMOOTH 46600 Description: HEMPEL'S CONTEX SMOOTH 46600 is an alkali resistant, acrylic topcoat in HEMPEL'S

CONTEX anticarbonation system. The product is water-repellent, but allows water vapour from the substrate to pass through the paint film. Has a smooth flat finish.

Area of use: Exterior: Walls. Substrates: Concrete, masonry, cement rendering, asbestos, etc. PHYSICAL CONSTANTS: Colours/Shade nos: White/10000 or according to HEMPEL's colour card Finish: Flat Volume solids, %: 36 ± 1 Theoretical spreading rate: 7.2 m2/litre - 50 micron* Flash point: 44°C Specific gravity: 1.3 kg/litre Dry to touch: 2 hours (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry


substrate and the relevant consumption factor. The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are


APPLICATION DETAILS: Application method: Airless spray Brush/roller Thinner (max. vol.): 08080 (5%) 08080 (5%) Nozzle orifice: .025"-.027" Nozzle pressure: 100 bar/1450 psi (Airless spray data are indicative and subject to adjustment) Cleaning of tools: THINNER 08080 Indicated film thickness, dry: 50 micron Indicated film thickness, wet: 125 micron Recoat interval, min: 2 hours (20°C) Recoat interval, max: None Safety: Handle with care. Before and during use, observe all safety labels on packaging and


Product Data Sheet


HEMPEL'S CONTEX SMOOTH 46600

SURFACE The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt, CONDITION: grease and oil. It is recommended to apply a primer/sealer prior to the specified filling procedure.

Touch-up with primer/sealer on areas repaired with filler is recommended prior to application of topcoats.

FILLING: HEMPEL'S FILLER 36610. SEALING: HEMPEL'S CONTEX SEALER 26600 or HEMPEL'S ACRYLIC PRIMER/SEALER 26630. REMARKS: Drying data is given on the assumption that proper ventilation is provided. To obtain the best

result, follow HEMPEL's recommended painting specifications for HEMPEL'S CONTEX anticarbonation system. Please also see HEMPEL'S product information for HEMPEL'S CONTEX 46600.

Note: HEMPEL'S CONTEX SMOOTH 46600 is for professional use only. ISSUED BY: HEMPEL A/S - 4660010000CS005






HEMPEL'S CONTEX®SMOOTH W/B 48600 Description: HEMPEL'S CONTEX SMOOTH W/B 48600 is a waterborne alkali resistant, acrylic

topcoat in HEMPEL'S CONTEX anticarbonation system. The product is water-repellent, but allows water vapour from the substrate to pass through the paint film.

May also be used as a roof coating on terraces and roofs with only sporadic and light traffic. The product has a smooth and flat finish.

Area of use: Exterior: Walls. Substrates: Concrete, masonry, cement rendering, asbestos, etc. PHYSICAL CONSTANTS: Colours/Shade nos: White/10000 or according to HEMPEL's colour card Finish: Flat Volume solids, %: 47 ± 1 Theoretical spreading rate: 6.3 m2/litre - 75 micron* Flash point: > 93°C Specific gravity: 1.3 kg/litre Dry to touch: 4 hours/10°C 2 hours (20°C) 1 hour (40°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry



subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1. APPLICATION DETAILS: Application method: Airless spray Brush/roller Thinner (max. vol.): Fresh water (5%) Fresh water (5%) Nozzle orifice: .023"-.025" Nozzle pressure: 150-180 bar (Airless spray data are indicative and subject to adjustment) Cleaning of tools: Fresh water Indicated film thickness, dry: 75 micron Indicated film thickness, wet: 150 micron Recoat interval, min: 12 hours (10°C) 6 hours (20°C) 3 hours (40°C) Recoat interval, maximum: None None None Safety: Handle with care. Before and during use, observe all safety labels on packaging and

paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas

Product Data Sheet


HEMPEL'S CONTEX SMOOTH W/B 48600

SURFACE The surface should be stable, firm, dry and free of dust, sand, loose old paint, CONDITION: laitance, dirt, grease and oil. FILLING: HEMPEL'S EXTERIOR FILLER 38830 or HEMPEL'S ACRYLIC FILLER 38900. SEALING: HEMPEL'S CONTEX PRIMER W/B 28600. REMARKS: Use only where application and drying can proceed at temperatures above 5°C,

preferably above 10°C, and relative humidity below 85%. Drying data is given on the assumption that proper ventilation is provided.

To obtain the best result, follow HEMPEL's recommended painting specifications for HEMPEL'S CONTEX anticarbonation system.

Note: HEMPEL'S CONTEX SMOOTH W/B 48600 is for professional use only. ISSUED BY: HEMPEL A/S - 4860010000CS002






HEMPEL'S SMOOTH TEXTURE 48740 Description: HEMPEL'S SMOOTH TEXTURE 48740 is a high-build, water-borne coating. The product

has non-drip properties and different patterns can be obtained by combining different application tools. Must be recoated to obtain desired colour and gloss.

Area of use: Interior and exterior: Walls, ceilings, partitions, etc. Substrates: Concrete, masonry, cement rendering, asbestos, etc. PHYSICAL CONSTANTS: Colours/Shade nos: Off-white/11630 Finish: Flat Volume solids, %: 54 ± 1 Theoretical spreading rate: 3.7 m²/litre - 150 micron* Flash point: > 93°C Specific gravity: 1.6 kg/litre Dry to touch: 2 hours (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry



subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1. APPLICATION DETAILS: Application method: Brush/roller Air-mix spray/Airless spray Thinner (max.vol.): None None Cleaning of tools: Fresh water Indicated film thickness, dry: 150 micron indicated film thickness, wet: 275 micron Recoat interval, min: 8 hours (10°C) 4 hours (20°C) 2 hours (40°C) Recoat interval, max None None None Safety: Handle with care. Before and during use, observe all safety labels on packaging and


Product Data Sheet


HEMPEL'S SMOOTH TEXTURE 48740



FILLING: HEMPEL'S FILLER 36610 or HEMPEL'S ACRYLIC FILLER 38900 SEALING: Transparent: HEMPEL'S BINDER/SEALER 09810 Opaque: HEMPEL'S ACRYLIC PRIMER/SEALER 26630 REMARKS: Drying data given is on the assumption that proper ventilation is provided. Use only where application and drying can proceed at temperatures above 5°C, preferably above

10°C and relative humidity below 85%. Other sealer/filler types may be specified. Note: HEMPEL'S SMOOTH TEXTURE 48740 is for professional use only. ISSUED BY: HEMPEL A/S - 4874011630CS004






HEMPEL'S GLOSS ENAMEL 52040 Description: HEMPEL'S GLOSS ENAMEL 52040 is a superior alkyd topcoat available in a wide range

of colours. The product is ideally suited for kitchens and bathrooms, doors, window frames, furniture and woodwork in general. Also ideal for metal surfaces. Approved according to SASO standard 472-1986, gloss enamel for interior and exterior surfaces.

Area of use: Interior and exterior. Substrates: Metal surfaces, woodwork, fibre-boards, etc. PHYSICAL CONSTANTS: Colours/Shade nos: White/10000 or according to HEMPEL's colour card Finish: High gloss Volume solids, %: 46 ± 1 Theoretical spreading rate: 15.3 m²/litre - 30 micron* Flash point: 38°C Specific gravity: 1.1 kg/litre Dry to touch: 6 hours (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry




APPLICATION DETAILS: Application method: Brush/roller Conventional spray Airless spray Thinner (max. vol.): 08230 or 08110(5%) 08230 (15%) 08230 (5%) Cleaning of tools: THINNER 08230 or 08110 Indicated film thickness, dry: 30 micron Indicated film thickness, wet: 75 micron Recoat interval, min: 8 hours (20°C) Recoat interval, max: None Safety: Handle with care. Before and during use, observe all safety labels on packaging and


Product Data Sheet


HEMPEL'S GLOSS ENAMEL 52040

SURFACE The surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt, grease and CONDITION: oil. It is recommended to apply a primer prior to the specified filling procedure. Touch-up with

primer on areas repaired with filler is recommended prior to application of topcoats. FILLING: HEMPEL'S ACRYLIC FILLER 38900. PRIMER: On ferrous metal: HEMPALIN PRIMER 12050 On wood: HEMPEL'S ALKYD UNDERCOAT 22460 REMARKS: Other primer/filler types may be specified. Drying data given is on the assumption that proper ventilation is provided. Note: HEMPEL'S GLOSS ENAMEL 52040 is for professional use only. ISSUED BY: HEMPEL A/S - 5204010000CS005






HEMPEL'S FLAT ENAMEL 52060 Description: HEMPEL'S FLAT ENAMEL 52060 is a superior alkyd topcoat. The product is ideally

suited for kitchens and bathrooms, doors, window frames, furniture and woodwork in general. Also ideal for metal surfaces.

Area of use: Interior and exterior. Substrates: Metal surfaces, woodwork, fibre-boards, etc. PHYSICAL CONSTANTS: Colours/Shade nos: White/10000 or according to HEMPEL's colour card Finish: Flat Volume solids, %: 40 ± 1 Theoretical spreading rate: 13.3 m²/litre - 30 micron* Flash point: 38°C Specific gravity: 1.3 kg/litre Dry to touch: 2 hours (20°C ) *The theoretical spreading rate has been calculated for the stated volume solids and dry




APPLICATION DETAILS: Application method: Brush/roller Conventional spray Airless spray Thinner (max. vol.): 08230 or 08110(5%) 08230 (15%) 08230 (5%) Cleaning of tools: THINNER 08230 or 08110 Indicated film thickness, dry: 30 micron indicated film thickness, wet: 75 micron Recoat interval, min: 8 hours (20°C) Recoat interval, max: None Safety: Handle with care. Before and during use, observe all safety labels on packaging and


Product Data Sheet


HEMPEL'S FLAT ENAMEL 52060

SURFACE The surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt, grease and CONDITION: oil. It is recommended to apply a primer/sealer prior to the specified filling procedure. Touch-up

with primer/sealer on areas repaired with filler is recommended prior to application of topcoats. FILLING: HEMPEL'S ACRYLIC FILLER 38900. PRIMER: On ferrous metal: HEMPALIN PRIMER 12050 On wood: HEMPEL'S ALKYD UNDERCOAT 22460 REMARKS: Other primer/filler types may be specified. Drying data given is on the assumption that proper ventilation is provided. Note: HEMPEL'S FLAT ENAMEL 52060 is for professional use only. ISSUED BY: HEMPEL A/S - 5206010000CS004






HEMPEL'S SEMI-GLOSS ENAMEL 52080 Description: HEMPEL'S SEMI-GLOSS ENAMEL 52080 is a superior alkyd topcoat. The product is

ideally suited for kitchens and bathrooms, doors, window frames, furniture and woodwork in general. Also ideal for metal surfaces.

Area of use: Interior and exterior. Substrates: Metal surfaces, woodwork, fibre-boards, etc. PHYSICAL CONSTANTS: Colours/Shade nos: White/10000 or according to HEMPEL's colour card Finish: Semi-gloss Volume solids, %: 47 ± 1 Theoretical spreading rate: 15.7 m²/litre - 30 micron* Flash point: 38°C Specific gravity: 1.2 kg/litre Dry to touch: 4 hours (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry



subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1. APPLICATION DETAILS: Application method: Brush/roller Conventional spray Airless spray Thinner (max. vol.): 08230 or 08110 (5%) 08230 (15%) 08230 (5%) Cleaning of tools: THINNER 08230 or 08110 Indicated film thickness, dry: 30 micron Indicated film thickness, wet: 75 micron Recoat interval, min: 8 hours (20°C) Recoat interval, max: None Safety: Handle with care. Before and during use, observe all safety labels on packaging and


Product Data Sheet


HEMPEL'S SEMI-GLOSS ENAMEL 52080


primer on areas repaired with filler is recommended prior to application of topcoats FILLING: HEMPEL'S ACRYLIC FILLER 38900. PRIMER: On ferrous metal: HEMPALIN PRIMER 12050 On wood: HEMPEL'S ALKYD UNDERCOAT 22460 REMARKS: Other primer/filler types may be specified. Drying data given is on the assumption that proper ventilation is provided. Note: HEMPEL'S SEMI-GLOSS ENAMEL 52080 is for professional use only. ISSUED BY: HEMPEL A/S - 5208010000CS004






HEMPEL'S METALLIC PAINT 52410 Description: HEMPEL'S METALLIC PAINT 52410 is a superior alkyd topcoat. The product is highly

pigmented with micaceous iron oxide (MIO) to provide a special metallic textured finish. Area of use: Interior and exterior. Substrates: Metal surfaces, woodwork, fibre-boards, etc. PHYSICAL CONSTANTS: Colours/Shade nos: Black/12650 - Light grey/12660 Finish: Flat Volume solids, %: 55 ± 1 Theoretical spreading rate: 13.8 m²/litre - 40 micron* Flash point: 41°C Specific gravity: 1.7 kg/litre Dry to touch: 6 hours (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry



subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1. APPLICATION DETAILS: Application method: Brush/roller Thinner (max. vol.): 08230 or 08110 (5%) Cleaning of tools: THINNER 08230 or 08110 Indicated film thickness, dry: 40 micron indicated film thickness, wet: 75 micron Recoat interval, min: 12 hours (20°C) Recoat interval, max: None Safety: Handle with care. Before and during use, observe all safety labels on packaging and


Product Data Sheet


HEMPEL'S METALLIC PAINT 52410

SURFACE The surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt, grease and CONDITION: oil. It is recommended to apply a primer/sealer prior to the specified filling procedure. Touch-up

with primer/sealer on areas repaired with filler is recommended prior to application of topcoats. FILLING: HEMPEL'S ACRYLIC FILLER 38900. PRIMER: On ferrous metal: HEMPALIN PRIMER 12050 On wood: HEMPEL'S ALKYD UNDERCOAT 22460 REMARKS: Other primer/filler types may be specified. Drying data given is on the assumption that proper ventilation is provided. Note: HEMPEL'S METALLIC PAINT 52410 is for professional use only. ISSUED BY: HEMPEL A/S - 5241012650CS002






HEMPALUX®GLOSS 52940 Description: HEMPALUX GLOSS 52940 is a superior alkyd topcoat with improved colour retention.

The product is ideally suited for doors, window frames, furniture and woodwork in general where a high quality finish is required. Also ideal for primed metal surfaces.

The product has excellent hiding power and is easy to apply. Area of use: Interior and exterior. Substrates: Metal surfaces, woodwork, fibre-boards, etc. PHYSICAL CONSTANTS: Colours/Shade nos: White/14800 or according to HEMPEL's colour card Finish: High gloss Volume solids, %: 43 ± 1 Theoretical spreading rate: 14.3 m²/litre - 30 micron* Flash point: 33°C Specific gravity: 1.2 kg/litre Dry to touch: 4 hours (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry



subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1. APPLICATION DETAILS: Application method: Brush/roller Conventional spray Airless spray Thinner (max. vol.): 08230 or 08110(5%) 08230 (15%) 08230 (5%) Cleaning of tools: THINNER 08230 or 08110 Indicated film thickness, dry: 30 micron Indicated film thickness, wet: 75 micron Recoat interval, min: 8 hours (20°C) Recoat interval, max: None Safety: Handle with care. Before and during use, observe all safety labels on packaging and


Product Data Sheet


HEMPALUX GLOSS 52940


primer on areas repaired with filler is recommended prior to application of topcoats. FILLING: HEMPEL'S ACRYLIC FILLER 38900. PRIMER: On ferrous metal: HEMPALIN PRIMER 12050 On wood: HEMPEL'S ALKYD UNDERCOAT 22460 REMARKS: Other primer/filler types may be specified. Drying data given is on the assumption that proper ventilation is provided. Note: HEMPALUX GLOSS 52940 is for professional use only. ISSUED BY: HEMPEL A/S - 5294014800CS001






HEMPALUX®SEMI-GLOSS 52980 Description: HEMPALUX SEMI-GLOSS 52980 is a superior alkyd topcoat with improved colour

retention. The product is ideally suited for doors, window frames, furniture and woodwork in general where a high quality finish is required. Also ideal for primed metal surfaces. The product has excellent hiding power and is easy to apply.

Area of use: Interior and exterior. Substrates: Metal surfaces, woodwork, fibre-boards, etc. PHYSICAL CONSTANTS: Colours/Shade nos: White/14900 or according to HEMPEL's colour card Finish: Semi-gloss Volume solids, %: 48 ± 1 Theoretical spreading rate: 16.0 m²/litre - 30 micron* Flash point: 38°C Specific gravity: 1.4 kg/litre Dry to touch: 2 hours (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry



subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.. APPLICATION DETAILS: Application method: Brush/roller Conventional spray Airless spray Thinner (max. vol.): 08230 or 08110 (5%) 08230 (15%) 08230 (5%) Cleaning of tools: THINNER 08230 or 08110 Indicated film thickness, dry: 30 micron Indicated film thickness, wet: 75 micron Recoat interval, min: 4 hours (20°C) Recoat interval, max: None Safety: Handle with care. Before and during use, observe all safety labels on packaging and


Product Data Sheet


HEMPALUX SEMI-GLOSS 52980


primer on areas repaired with filler is recommended prior to application of topcoats FILLING: HEMPEL'S ACRYLIC FILLER 38900. PRIMER: On ferrous metal: HEMPALIN PRIMER 12050 On wood: HEMPEL'S ALKYD UNDERCOAT 22460 REMARKS: Other primer/filler types may be specified. Drying data given is on the assumption that proper ventilation is provided. Note: HEMPALUX SEMI-GLOSS 52980 is for professional use only. ISSUED BY: HEMPEL A/S - 5298014900CS001






HEMPATHANE®ENAMEL 55100

BASE 55109 with CURING AGENT 95370 Description: HEMPATHANE ENAMEL 55100 is a two-component, acrylic polyurethane enamel with

excellent gloss and colour retention. The product has good resistance to water, impact and abrasion. Easy to clean.

Area of use: Interior and exterior: Walls. Substrates: Concrete, masonry, cement rendering, asbestos, etc. PHYSICAL CONSTANTS: Colours/Shade nos: White/10000 or according to HEMPEL's colour card Finish: High-gloss Volume solids, %: 52 ± 1 Theoretical spreading rate: 14.9 m2/litre - 35 micron* Flash point: 35°C Specific gravity: 1.3 kg/litre Dry to touch: 4-5 hours (20°C) Fully cured: 7 days at 20°C *The theoretical spreading rate has been calculated for the stated volume solids and dry




APPLICATION DETAILS: Mixing ratio for 55100: Base 55109 : Curing agent 95370 7 : 1 by volume Application method: Brush/roller Conventional spray Thinner (max. vol.): 08080 (5%) 08080 (25%) (see REMARKS below) Pot life: 2 hours (20°C) ½ hour (40°C) Cleaning of tools: THINNER 08080 Indicated film thickness, dry: 35 micron Indicated film thickness, wet: 75 micron Recoat interval, min: 8 hours (20°C) Recoat interval, max: None Safety: Handle with care. Before and during use, observe all safety labels on packaging and


Product Data Sheet


HEMPATHANE ENAMEL 55100



FILLING: HEMPEL'S EPOXY FILLER 35230. SEALING: HEMPEL'S EPOXY SEALER 05990. REMARKS: Drying data is given on the assumption that proper ventilation is provided. High humidity and/or

condensation during application and the following 16 hours (20°C/68°F) may adversely affect the film formation. When applying HEMPATHANE ENAMEL 55100 by spray, thinning is recommended to obtain the best possible finish. The necessary amount of thinning will depend on the actual conditions.

Note: Curing agent 95370 is sensitive to moisture. Store in a dry place and keep cans tightly closed until use. Open cans with caution due to possible high pressure. Even small traces of water in the mixed paint will reduce pot life and result in film defects.

HEMPATHANE ENAMEL 55100 is for professional use only. ISSUED BY: HEMPEL A/S - 5510010000CO006





Issued: September 2006 Page 1 of 2

HEMPATHANE®TOPCOAT 55210

BASE 55219 with CURING AGENT 95370

Description: HEMPATHANE TOPCOAT 55210 is a two-component, acrylic polyurethane coating with

good gloss and colour retention. The product has good resistance to water, impact and abrasion. Easy to clean.

Area of use: Interior and exterior: Walls. Substrates: Concrete, masonry, cements rendering, asbestos, etc. PHYSICAL CONSTANTS: Colours/Shade nos: White/10000 or according to HEMPEL's colour card Finish: Semi-gloss Volume solids, %: 51 ± 1 Theoretical spreading rate: 10.2 m2/litre - 50 micron* Flash point: 33°C Specific gravity: 1.2 kg/litre Dry to touch: 8 hours (20°C) Fully cured: 7 days at 20°C *The theoretical spreading rate has been calculated for the stated volume solids and dry




APPLICATION DETAILS: Mixing ratio for 55210: Base 55219 : Curing agent 95370 7 : 1 by volume Application method: Brush/roller Conventional spray Thinner (max. vol.): 08080 (5%) 08080 (25%) (see REMARKS below) Pot life: 4 hours (20°C) 1 hour (40°C) Cleaning of tools: THINNER 08080 Indicated film thickness, dry: 50 micron Indicated film thickness, wet: 100 micron Recoat interval, min: 8 hours (20°C) Recoat interval, max: None Safety: Handle with care. Before and during use, observe all safety labels on packaging and


Product Data Sheet

Issued: September 2006 Page 2 of 2

HEMPATHANE TOPCOAT 55210



FILLING: HEMPEL'S EPOXY FILLER 35230. SEALING: HEMPEL'S EPOXY SEALER 05990. REMARKS: Drying data is given on the assumption that proper ventilation is provided. High humidity and/or

condensation during application and the following 16 hours (20°C/68°F) may adversely affect the film formation. When applying HEMPATHANE TOPCOAT 55210 by spray, thinning is recommended to obtain the best possible finish. The necessary amount of thinning will depend on the actual conditions.

Note: Curing agent 95370 is sensitive to moisture. Store in a dry place and keep cans tightly closed until use. Open cans with caution due to possible high pressure. Even small traces of water in the mixed paint will reduce pot life and result in film defects.

HEMPATHANE TOPCOAT 55210 is for professional use only. ISSUED BY: HEMPEL A/S - 5521010000CO011






HEMPATEX®ENAMEL 56360 Description: HEMPATEX ENAMEL 56360 is an acrylic finishing coat with good resistance to UV light.

Has good colour and gloss retention. Ideal as a topcoat in HEMPATEX and HEMPADUR systems. Can be used on alkaline substrates. Available in a wide range of colours.

Area of use: Interior and exterior: Walls. Substrates: Concrete, masonry, cement rendering, asbestos, etc. PHYSICAL CONSTANTS: Colours/Shade nos: White/10000 or according to HEMPEL's colour card Finish: Semi-gloss Volume solids, %: 32 ± 1 Theoretical spreading rate: 9.1 m2/litre - 35 micron* Flash point: 25°C Specific gravity: 1.1 kg/litre Dry to touch: 3-4 hours (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry



subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1. APPLICATION DETAILS: Application method: Brush/roller Conventional spray Thinner (max. vol.): 08080 (5%) 08080 (15%) Cleaning of tools: THINNER 08080 Indicated film thickness, dry: 35 micron Indicated film thickness, wet: 100 micron Recoat interval, min: 4 hours (20°C) Recoat interval, max: None Safety: Handle with care. Before and during use, observe all safety labels on packaging and


Product Data Sheet


HEMPATEX ENAMEL 56360



FILLING: HEMPEL'S FILLER 36610 or HEMPEL'S ACRYLIC FILLER 38900. SEALING: HEMPEL'S ACRYLIC PRIMER/SEALER 26630. REMARKS: Drying data is given on the assumption that proper ventilation is provided. As HEMPATEX ENAMEL 56360 is a thermoplastic product, prolonged direct contact at

temperatures above approx. 40°C may cause film indentation. When the temperature drops below, the mechanical strength is recovered.

Note: HEMPATEX ENAMEL 56360 is for professional use only. ISSUED BY: HEMPEL A/S - 5636010000CO014






HEMPEL'S CONTEX®FINE 56610 Description: HEMPEL'S CONTEX FINE 56610 is an alkali resistant, acrylic topcoat in HEMPEL'S

CONTEX anti-carbonation system. The product is water-repellent, but allows water vapour from the substrate to pass through the paint film. The product has an attractive fine granular textured finish.




subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1. APPLICATION DETAILS: Application method: Conventional spray Hopper Gun Brush/roller (small areas) Thinner (max. vol.): 08080 (5%) 08080 (5%) 08080 (15%) Cleaning of tools: THINNER 08080 Indicated film thickness, dry: 150 micron Indicated film thickness, wet: 275 micron Recoat interval, min: 2 hours (20°C) Recoat interval, max: None Safety: Handle with care. Before and during use, observe all safety labels on packaging and


Product Data Sheet


HEMPEL'S CONTEX FINE 56610



FILLING: HEMPEL'S FILLER 36610. SEALING: HEMPEL'S CONTEX SEALER 26600 or HEMPEL'S ACRYLIC PRIMER/SEALER 26630. INTERMEDIATE HEMPEL'S CONTEX SMOOTH 46600. COAT: REMARKS: Drying data is given on the assumption that proper ventilation is provided. Note: HEMPEL'S CONTEX FINE 56610 is for professional use only. ISSUED BY: HEMPEL A/S - 5661010000CS004






HEMPEL'S CONTEX®MEDIUM 56620 Description: HEMPEL'S CONTEX MEDIUM 56620 is a topcoat in HEMPEL'S CONTEX anticarbonation

system. The product is water-repellent, but allows water vapour from the substrate to pass through the paint film. HEMPEL'S CONTEX MEDIUM 56620 has an attractive medium granular texture.





APPLICATION DETAILS: Application method: Conventional spray Hopper Gun Brush/roller (small areas) Thinner (max. vol.): None 08080 (5%) 08080 (15%) Cleaning of tools: THINNER 08080 Indicated film thickness, dry: 150 micron Indicated film thickness, wet: 250 micron Recoat interval, min: 2 hours (20°C) Recoating interval, max: None Safety: Handle with care. Before and during use, observe all safety labels on packaging and


Product Data Sheet


HEMPEL'S CONTEX MEDIUM 56620



FILLING: HEMPEL'S FILLER 36610. SEALING: HEMPEL'S CONTEX SEALER 26600 or HEMPEL'S ACRYLIC PRIMER/SEALER 26630. INTERMEDIATE HEMPEL'S CONTEX SMOOTH 46600. COAT: REMARKS: Drying data is given on the assumption that proper ventilation is provided. Note: HEMPEL'S CONTEX MEDIUM 56620 is for professional use only. ISSUED BY: HEMPEL A/S - 5662010000CS004






HEMUCRYL®ENAMEL 58100 Description: HEMUCRYL ENAMEL 58100 is a water-borne acrylic-based paint. It dries to a non-

yellowing and glossy finish with excellent colour and gloss retention. Area of use: Interior and exterior: Walls, ceilings, roofs and primed structural steel. Substrates: Concrete, masonry, cement rendering, asbestos and steel. PHYSICAL CONSTANTS: Colours/Shade nos: White/10000 or according to HEMPEL's colour card Finish: Glossy Volume solids, %: 41 ± 1 Theoretical spreading rate: 10.3 m2/litre - 40 micron* Flash point: > 93°C Specific gravity: 1.3 kg/litre Dry to touch: 2 hours (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry




APPLICATION DETAILS: Application method: Brush/roller Thinner (max. vol.): Fresh water (5%) Cleaning of tools: Fresh water Indicated film thickness, dry: 40 micron Indicated film thickness, wet: 100 micron Recoat interval, min: 6 hours (20°C) Recoat interval, max: None Safety: Handle with care. Before and during use, observe all safety labels on packaging and


Product Data Sheet


HEMUCRYL ENAMEL 58100



FILLING: Interior: HEMPEL'S INTERIOR FILLER 38820 Exterior: HEMPEL'S FILLER 36610 or HEMPEL'S ACRYLIC FILLER 38900 SEALING: Transparent: HEMPEL'S BINDER/SEALER 09810 Opaque: HEMPEL'S ACRYLIC PRIMER/SEALER 26630 REMARKS: Use only where application and drying can proceed at temperatures above 5°C, preferably above

10°C and relative humidity below 85%. Drying data is given on the assumption that proper ventilation is provided. Other sealer/filler types may be specified. For use on buildings, the relatively high resistance to diffusion of water vapour and carbon dioxide

should be taken into account. Note: HEMUCRYL ENAMEL 58100 is for professional use only. ISSUED BY: HEMPEL A/S - 5810010000CO010






HEMUCRYL®TOPCOAT HI-BUILD 58230 Description: HEMUCRYL TOPCOAT HI-BUILD 58230 is a water-borne acrylic based paint. It dries to a

non-yellowing and semi-flat finish and has excellent colour retention. It has low dirt pick-up and good weathering properties and good wash ability.

Area of use: Interior and exterior: Walls, ceilings, roofs and primed structural steel. Substrates: Concrete, masonry, cement rendering, asbestos and steel. PHYSICAL CONSTANTS: Colours/Shade nos: White/10000 or according to HEMPEL's colour card Finish: Semi-flat Volume solids, %: 42 ± 1 Theoretical spreading rate: 5.6 m2/litre - 75 micron* Flash point: > 93°C Specific gravity: 1.2 kg/litre Dry to touch: 1½ hours (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry




APPLICATION DETAILS: Application method: Brush/roller Thinner (max. vol.): Fresh water (5%) Cleaning of tools: Fresh water Indicated film thickness, dry: 75 micron Indicated film thickness, wet: 175 micron Recoat interval, min: 2 hours (20°C) Recoat interval, max: None Safety: Handle with care. Before and during use, observe all safety labels on packaging and


Product Data Sheet


HEMUCRYL TOPCOAT HI-BUILD 58230




10°C and relative humidity below 85%. Drying data is given on the assumption that proper ventilation is provided. Other sealer/filler types may be specified. For use on buildings, the relatively high resistance to diffusion of water vapour and carbon dioxide

should be taken into account. Note: HEMUCRYL TOPCOAT HI-BUILD 58230 is for professional use only. ISSUED BY: HEMPEL A/S - 5823010000CO006






HEMPEL'S ACRYLIC SILK EMULSION 58260 Description: HEMPEL'S ACRYLIC SILK EMULSION 58260 is a water-borne, acrylic-based paint with

excellent colour and gloss stability giving a silk gloss finish. The product is washable, has good water repellence and adhesion to aged alkyd paints is good.

Area of use: Interior and exterior: Walls, ceilings, partitions, etc. Substrates: Concrete, masonry, cement rendering, plaster, woodwork, etc. PHYSICAL CONSTANTS: Colours/Shade nos: White/10000 or pastel colours according to HEMPEL's colour card Finish: Semi-gloss Volume solids, %: 39 ± 1 Theoretical spreading rate: 11.1 m²/litre - 35 micron* Flash point: > 93°C Specific gravity: 1.2 kg/litre Dry to touch: 2 hours (20°C) 1 hour (40°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry



subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1. APPLICATION DETAILS: Application method: Brush/roller Airless spray Thinner (max. vol.): None Fresh water (5%) Cleaning of tools: Fresh water Indicated film thickness, dry: 35 micron Indicated film thickness, wet: 100 micron Recoat interval, min: 8 hours (10°C) 4 hours (20°C) 2 hours (40°C) Recoat interval, max: None None Safety: Handle with care. Before and during use, observe all safety labels on packaging and


Product Data Sheet


HEMPEL'S ACRYLIC SILK EMULSION 58260



FILLING: HEMPEL'S FILLER 36610 or HEMPEL'S ACRYLIC FILLER 38900 SEALING: Transparent: HEMPEL'S BINDER/SEALER 09810 Opaque: HEMPEL'S ACRYLIC PRIMER/SEALER 26630 REMARKS: Use only where application and drying can proceed at temperatures above 5°C, preferably above

10°C and relative humidity below 85%. Drying data given is on the assumption that proper ventilation is provided. Other sealer/filler types may be specified. Note: HEMPEL'S ACRYLIC SILK EMULSION 58260 is for professional use. ISSUED BY: HEMPEL A/S - 5826010000CS005






HEMPEL'S NON-DRIP ACRYLIC EMULSION 58270 Description: HEMPEL'S NON-DRIP ACRYLIC EMULSION 58270 is a water-borne, acrylic-based paint

with excellent colour and gloss stability giving a smooth silk gloss finish. The product is washable and has good alkali resistance.

Area of use: Interior and exterior: Walls, ceilings, partitions, etc. Substrates: Concrete, masonry, cement rendering, plaster, etc. PHYSICAL CONSTANTS: Colours/Shade nos: White/10000 or pastel colours according to HEMPEL's colour card Finish: Semi-flat Volume solids, %: 39 ± 1 Theoretical spreading rate: 11.1 m²/litre - 35 micron* Flash point: > 93°C Specific gravity: 1.2 kg/litre Dry to touch: 1 hour (20°C) ½ hour (40°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry



subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1. APPLICATION DETAILS: Application method: Brush/roller Airless spray Thinner (max. vol.): None Fresh water (5%) Cleaning of tools: Fresh water Indicated film thickness, dry: 35 micron Indicated film thickness, wet: 100 micron Recoat interval, min: 8 hours (10°C) 4 hours (20°C) 2 hours (40°C) Recoat interval, max: None None Safety: Handle with care. Before and during use, observe all safety labels on packaging and


Product Data Sheet


HEMPEL'S NON-DRIP ACRYLIC EMULSION 58270




10°C and relative humidity below 85%. Other sealer/filler types may be specified. Drying data given is on the assumption that proper ventilation is provided. Note: HEMPEL'S NON-DRIP ACRYLIC EMULSION 58270 is for professional use. ISSUED BY: HEMPEL A/S - 5827010000CS001






HEMPEL'S SILK EMULSION 58330 Description: HEMPEL'S SILK EMULSION 58330 is a water-borne quality coating. The coating is

washable and has a silk gloss and smooth finish. Area of use: Interior and exterior: Walls, ceilings, partitions. Substrates: Concrete, masonry, cement rendering, gypsum boards, asbestos, etc. PHYSICAL CONSTANTS: Colours/Shade nos: White/10000 or according to HEMPEL'S colour card Finish: Semi-flat Volume solids, %: 28 ± 1 Theoretical spreading rate: 8.0 m²/litre - 35 micron* Flash point: > 93°C Specific gravity: 1.2 kg/litre Dry to touch: 2 hours (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry




APPLICATION DETAILS: Application method: Brush/roller Conventional spray Airless spray Thinner (max. vol.): Fresh water (20%) Fresh water (10%) Fresh water (5%) Cleaning of tools: Fresh water Indicated film thickness, dry: 35 micron Indicated film thickness, wet: 125 micron Recoat interval, min: 8 hours (10°C) 4 hours (20°C) 2 hours (40°C) Recoat interval, max: None None None Safety: Handle with care. Before and during use, observe all safety labels on packaging and


Product Data Sheet


HEMPEL'S SILK EMULSION 58330



FILLING: Interior: HEMPEL'S INTERIOR FILLER 38820 Exterior: HEMPEL'S EXTERIOR FILLER 38830 or HEMPEL'S ACRYLIC FILLER 38900 SEALING: Transparent: HEMPEL'S BINDER/SEALER 09810 Opaque: HEMPEL'S PRIMER/SEALER 28830 REMARKS: Use only where application and drying can proceed at temperatures above 5°C, preferably above

10°C and relative humidity below 85%. Drying data given is on the assumption that proper ventilation is provided. Other sealer/filler types may be specified. Note: HEMPEL'S SILK EMULSION 58330 is for professional use only. ISSUED BY: HEMPEL A/S - 5833010000CS005






HEMPEL'S CONTRACT EMULSION 58410 Description: HEMPEL'S CONTRACT EMULSION 58410 is an economic, water-borne, acrylic, decorative coating, which has a flat and smooth finish. Area of use: Interior: Walls, ceilings partitions. Substrates: Concrete, masonry, woodwork. PHYSICAL CONSTANTS: Colours/Shade nos: White/10000 or according to HEMPEL'S colour card Finish: Flat Volume solids, %: 30 ± 1 Theoretical spreading rate: 10.0 m²/litre - 30 micron* Flash point: > 93°C Specific gravity: 1.6 kg/litre Dry to touch: 1 hour (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry



subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1. APPLICATION DETAILS: Application method: Brush/roller Conventional spray Airless spray Thinner (max. vol.): Fresh water (20%) Fresh water (10%) Fresh water (5%) Cleaning of tools: Fresh Water Indicated film thickness, dry: 30 micron Indicated film thickness, wet: 100 micron Recoat interval, min: 4 hours (10°C) 2 hours (20°C) 1 hour (40°C) Recoat interval, max: None None None Safety: Handle with care. Before and during use, observe all safety labels on packaging and


Product Data Sheet


HEMPEL'S CONTRACT EMULSION 58410



FILLING: HEMPEL'S INTERIOR FILLER 38820 SEALING: Transparent: HEMPEL'S BINDER/SEALER 09810 Opaque: HEMPEL'S PRIMER/SEALER 28830 REMARKS: Use only where application and drying can proceed at temperatures above 5°C, preferably above

10°C and relative humidity below 85%. Drying data given is on the assumption that proper ventilation is provided. Other sealer/filler types may be specified. Note: HEMPEL'S CONTRACT EMULSION 58410 is for professional use only. ISSUED BY: HEMPEL A/S - 5841010000CS002




Product Data Sheet

HEMPEL


HEMPEL'S WALL VARNISH 58440 Description: HEMPEL'S WALL VARNISH 58440 is a water-borne acrylic coating. The product is

transparent and is available as a clear coat or in pearlished finishes. The product has good resistance to UV light.

Area of use: Interior and Exterior: Walls, ceilings partitions etc. Substrates: Concrete, masonry, cement rendering, gypsum boards, etc. PHYSICAL CONSTANTS:

Colours/Shade nos: Clear/00000 or pearlescent colours Finish: Glossy Volume solids, %: 38 ± 1 Theoretical spreading rate: 7.4 m²/litre - 50 micron* Flash point: > 66°C Specific gravity: 1.0 kg/litre Dry to touch: 2 hours (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry




APPLICATION DETAILS: Application method: Brush/roller Thinner (max. vol.): (None) Cleaning of tools: Fresh Water Indicated film thickness, dry: 50 micron Indicated film thickness, wet: 125 micron Recoat interval, min: 4 hours (20°C) Recoat interval, max: None

Safety: Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas.

Product Data Sheet


HEMPEL'S WALL VARNISH 58440

SURFACE The surface should be stable, firm, dry and free of contaminants like dust, old paint, dirt, oil, CONDITION: grease and algae. UNDERCOAT: HEMPEL'S FLAT EMULSION 58710, HEMPEL'S WALLART 58470 or according to specification. REMARKS: Use only where application and drying can proceed at temperatures above 5°C, preferably above

10°C and relative humidity below 85%. Drying data is given on the assumption that proper ventilation is provided.

Apply one or more coats to obtain the desired colour and a uniform appearance. As the product is transparent, the resulting colour will depend on the colour of the substrate. Note: HEMPEL'S WALL VARNISH 58440 is for professional use only.

ISSUED BY: HEMPEL A/S - 5844000000CR004






HEMPEL'S WALLART 58470 Description: HEMPEL'S WALLART 58470 is a water-borne, acrylic based, decorative coating. It has

been developed specifically for creating decorative effects, such as; marbling, sponging, rag-rolling.

Area of use: Interior: Walls. Substrates: Concrete, masonry, gypsum boards, cement rendering etc. PHYSICAL CONSTANTS: Colours/Shade nos: White/10000 or according to HEMPEL'S colour card Finish: Semi-flat Volume solids, %: 31 ± 1 Theoretical spreading rate: 10.3 m²/litre - 30 micron* Flash point: > 93°C Specific gravity: 1.1 kg/litre Dry to touch: 2 hours (20°C) 1 hour (40°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry


substrate, the pattern/effect selected, the skill of the applicator and the relevant consumption factor.



APPLICATION DETAILS: Application method: Brush/roller/sponge/rag/spatula depending on desired finish. Thinner (max. vol.): Fresh water (20%) Cleaning of tools: Fresh water Indicated film thickness, dry: 30 micron indicated film thickness, wet: 100 micron Recoat interval, min: 8 hours (10°C) 4 hours (20°C) 2 hour (40°C) Recoat interval, max: None None None Safety: Handle with care. Before and during use, observe all safety labels on packaging and


Product Data Sheet


HEMPEL'S WALLART 58470



UNDERCOAT: HEMPEL'S FLAT EMULSION 58710 OVERCOATING: To obtain a glossy finish a clear coat of HEMPEL'S WALL VARNISH 58440 may be applied. REMARKS: Use only where application and drying can proceed at temperatures above 5°C, preferably above

10°C and relative humidity below 85%. Drying data given is on the assumption that proper ventilation is provided. Other undercoats may be specified. Note: HEMPEL'S WALLART 58470 is for professional use only. ISSUED BY: HEMPEL A/S - 5847000010CS001






HEMPEL'S SILK TEXTURE 58540 Description: HEMPEL'S SILK TEXTURE 58540 is a water-borne paint, which has an excellent light-

textured finish. The product is flexible and has non-drip properties. The final appearance is determined by the application method. Different patterns can be obtained by using various types of textured rollers.

Area of use: Interior and exterior: Walls, ceilings, partitions. Substrates: Concrete, masonry, cement rendering, gypsum boards, asbestos, etc. PHYSICAL CONSTANTS: Colours/Shade nos: White/10000 or according to HEMPEL'S colour card Finish: Semi-flat Volume solids, %: 45 ± 1 Theoretical spreading rate: 11.3 m²/litre - 40 micron* Flash point: > 93°C Specific gravity: 1.3 kg/litre Dry to touch: 2 hours (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry




APPLICATION DETAILS: Application method: Textured rollers Thinner (max. vol.): None Cleaning of tools: Fresh water Indicated film thickness, dry: 40 micron Indicated film thickness, wet: 100 micron Recoat interval, min: 4 hours (20°C) Recoat interval, max: None Safety: Handle with care. Before and during use, observe all safety labels on packaging and


Product Data Sheet


HEMPEL'S SILK TEXTURE 58540




10°C and relative humidity below 85%. Drying data given is on the assumption that proper ventilation is provided. Other sealer/filler types may be specified. Note: HEMPEL'S SILK TEXTURE 58540 is for professional use only. ISSUED BY: HEMPEL A/S - 5854010000CS003






HEMPEL'S INTERIOR EMULSION 58610 Description: HEMPEL'S INTERIOR EMULSION 58610 is an economic, water-borne, decorative

coating, which has a flat and smooth finish. Area of use: Interior: Walls, ceilings, partitions. Substrates: Concrete, masonry, woodwork. PHYSICAL CONSTANTS: Colours/Shade nos: White/10000 or according to HEMPEL'S colour card Finish: Flat Volume solids, %: 42 ± 1 Theoretical spreading rate: 14.0 m²/litre - 30 micron* Flash point: > 93°C Specific gravity: 1.6 kg/litre Dry to touch: 1 hour (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry




APPLICATION DETAILS: Application method: Brush/roller Conventional spray Airless spray Thinner (max. vol.): Fresh water (20%) Fresh water (10%) Fresh water (5%) Cleaning of tools: Fresh water Indicated film thickness, dry: 30 micron indicated film thickness, wet: 75 micron Recoat interval, min: 4 hours (10°C) 2 hours (20°C) 1 hour (40°C) Recoat interval, max: None None None Safety: Handle with care. Before and during use, observe all safety labels on packaging and


Product Data Sheet


HEMPEL'S INTERIOR EMULSION 58610



FILLING: HEMPEL'S INTERIOR FILLER 38820. SEALING: Transparent: HEMPEL'S BINDER/SEALER 09810 Opaque: HEMPEL'S PRIMER/SEALER 28830 REMARKS: Use only where application and drying can proceed at temperatures above 5°C, preferably above

10°C and relative humidity below 85%. Drying data given is on the assumption that proper ventilation is provided. Other sealer/filler types may be specified. Note: HEMPEL'S INTERIOR EMULSION 58610 is for professional use only. ISSUED BY: HEMPEL A/S - 5861010000CS006






HEMPEL'S GLOSS EMULSION 58650 Description: HEMPEL'S GLOSS EMULSION 58650 is a water-borne, high-grade acrylic finishing coat.

It is washable and has excellent gloss and colour retention. Ideally suited in a humid climate, has excellent water-repellence, and will permit water vapour from the substrate to pass through the paint film.

Area of use: Interior and exterior: Walls, ceilings, partitions. Substrates: Concrete, masonry, woodwork, cement rendering, asbestos, etc. PHYSICAL CONSTANTS: Colours/Shade nos: White/10000 or according to HEMPEL's colour card Finish: Glossy Volume solids, %: 32 ± 1 Theoretical spreading rate: 9.1 m²/litre - 35 micron* Flash point: > 93°C Specific gravity: 1.2 kg/litre Dry to touch: 1 hour (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry



subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1. APPLICATION DETAILS: Application method: Brush/roller Conventional spray Airless spray Thinner (max. vol.): None Fresh water (5%) Fresh water (5%) Cleaning of tools: Fresh water Indicated film thickness, dry: 35 micron Indicated film thickness, wet: 100 micron Recoat interval, min: 4 hours (10°C) 2 hours (20°C) 1 hour (40°C) Recoat interval, max: None None None Safety: Handle with care. Before and during use, observe all safety labels on packaging and


Product Data Sheet


HEMPEL'S GLOSS EMULSION 58650




10°C and relative humidity below 85%. Drying data given is on the assumption that proper ventilation is provided.

Other sealer/filler types may be specified. To obtain full hiding power when changing colour, it is recommended to apply HEMPEL'S FLAT EMULSION 58710 as an undercoat in the desired colour.

Note: HEMPEL'S GLOSS EMULSION 58650 is for professional use only. ISSUED BY: HEMPEL A/S - 5865010000CS003






HEMPEL'S RUSTIK-2 58660 Description: HEMPEL'S RUSTIK-2 58660 is an acrylic water-borne coating, which contains marble

stones. Has an old rustic and textured finish. The final appearance is determined by the application method. Different patterns can be obtained by combining different application tools. Overcoating with solvent-borne or water-borne coatings is recommended to obtain the desired finish.

Area of use: Interior and exterior: Walls, ceilings, partitions, etc. Substrates: Concrete, masonry, cement rendering, gypsum boards, asbestos, etc. PHYSICAL CONSTANTS: Colours/shade nos: Off-white/11630 Finish: Flat Volume solids, %: 75 ± 1 Theoretical spreading rate: 0.4 m²/litre - 2 mm* Flash point: None Specific gravity: 2.0 kg/litre Dry to touch: 5 hours (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry




APPLICATION DETAILS: Application method: Trowel: Stainless steel trowel. Plastic trowel to obtain desired pattern (on very smooth

surfaces, apply one coat of HEMPEL'S FINE TEXTURE 58850 before application of HEMPEL'S RUSTIK-2 58660)

Thinner (max. vol.): None Cleaning of tools: Fresh water Recoat interval, min: 4 days (20°C) 2 days (40°C) Recoat interval, max: None None Safety: Handle with care. Before and during use, observe all safety labels on packaging and


Product Data Sheet


HEMPEL'S RUSTIK-2 58660





Other sealer/filler types may be specified. Note: HEMPEL'S RUSTIK-2 58660 is for professional use only. ISSUED BY: HEMPEL A/S - 5866011630CS002






HEMPEL'S RUSTIK-3 58670 Description: HEMPEL'S RUSTIK-3 58670 is an acrylic water-borne coating, which contains marble

stones. Has an old rustic and textured finish. The final appearance is determined by the application method. Different patterns can be obtained by combining different application tools. Overcoating with solvent-borne or water-borne coatings is recommended to obtain desired finish.

Area of use: Interior and exterior: Walls, ceilings, partitions, etc. Substrates: Concrete, masonry, cement rendering, gypsum boards, asbestos, etc. PHYSICAL CONSTANTS: Colours/shade nos: Off-white/11630 Finish: Flat Volume solids, %: 75 ± 1 Theoretical spreading rate: 0.25 m²/litre - 3 mm* Flash point: None Specific gravity: 2.0 kg/litre Dry to touch: 5 hours (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry



subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1. APPLICATION DETAILS: Application method: Trowel: Stainless steel trowel. Plastic trowel to obtain desired pattern (on very smooth

surfaces apply one coat of HEMPEL'S FINE TEXTURE 58850 before application of HEMPEL'S RUSTIK-3 58670)



Product Data Sheet













HEMPEL'S RUSTIK-5 58680 Description: HEMPEL'S RUSTIK-5 58680 is a vinyl-based, water-borne coating, which contains

marble stones. Has an old rustic and textured finish. The final appearance is determined by the application method. Different patterns can be obtained by combining different application tools. Overcoating with solvent-borne or water-borne coatings is recommended to obtain desired finish.

Area of use: Interior and exterior: Walls, ceilings, partitions, etc. Substrates: Concrete, masonry, cement rendering, gypsum boards, asbestos, etc. PHYSICAL CONSTANTS: Colours/Shade nos: Off-white/11630 Finish: Flat Volume solids, %: 75 ± 1 Theoretical spreading rate: 0.15 m²/litre - 5 mm* Flash point: None Specific gravity: 2.0 kg/litre Dry to touch: 5 hours (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry




APPLICATION DETAILS: Application method: Trowel: Stainless steel trowel. Plastic trowel to obtain desired pattern (on very smooth

surfaces, apply one coat of HEMPEL'S FINE TEXTURE 58850 before application of HEMPEL'S RUSTIK-5 58680).



Product Data Sheet













HEMPEL'S FLAT EMULSION 58710 Description: HEMPEL'S FLAT EMULSION 58710 is a water-borne, acrylic-based quality coating. It

complies with SASO's Standard for exterior emulsion paints (470-1986) and Federal Standard (TT-P-29).

Area of use: Interior and exterior: Walls, ceilings, partitions, etc. Substrates: Concrete, masonry, cement rendering, gypsum boards, etc. PHYSICAL CONSTANTS: Colours/Shade nos: White/10000 or according to HEMPEL's colour card Finish: Flat Volume solids: 42 ± 1 Theoretical spreading rate: 14.0 m²/litre - 30 micron* Flash point: > 93°C Specific gravity: 1.5 kg/litre Dry to touch: 2 hours (10°C) 1 hour (20°C) 30 minutes (40°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry




APPLICATION DETAILS: Application method: Brush/roller Conventional spray Airless spray Thinner (max. vol.): Fresh water (15%) Fresh water (15%) Fresh water (5%) Cleaning of tools: Fresh water Indicated film thickness, dry: 30 micron Indicated film thickness, wet: 75 micron Recoat interval, min: 4 hours (10°C) 2 hours (20°C) 1 hour (40°C) Recoat interval, max: None None None Safety: Handle with care. Before and during use, observe all safety labels on packaging and


Product Data Sheet


HEMPEL'S FLAT EMULSION 58710



FILLING: Interior: HEMPEL'S INTERIOR FILLER 38820 Exterior: HEMPEL'S EXTERIOR FILLER 38830 or HEMPEL'S ACRYLIC FILLER 38900 SEALING: Transparent: HEMPEL'S BINDER/SEALER 09810 Opaque: HEMPEL'S PRIMER/SEALER 28830 REMARKS: Use only where application and drying can proceed at temperatures above 5°C, preferably above

10°C and relative humidity below 85%. Drying data given is on the assumption that proper ventilation is provided. Note: HEMPEL'S FLAT EMULSION 58710 is for professional use only. ISSUED BY: HEMPEL A/S - 5871010000CS007






HEMPEL'S ACRYLIC EMULSION 58720 Description: HEMPEL'S ACRYLIC EMULSION 58720 is a superior quality coating based on

waterborne acrylic copolymer binder. It is a washable coating and complies with Federal Standard TT-P-19C. When applied by roller, HEMPEL’S ACRYLIC EMULSION 58720 has non-drip properties.

Area of use: Interior and exterior: Walls, ceilings, partitions, etc. Substrates: Concrete, masonry, cement rendering, gypsum boards, etc. PHYSICAL CONSTANTS: Colours/Shade nos: White/10000 or according to HEMPEL's colour card Finish: Semi-flat Volume solids: 35 ± 1 Theoretical spreading rate: 11.7 m²/litre - 30 micron* Flash point: > 93°C Specific gravity: 1.3 kg/litre Dry to touch: 3 hours (10°C) 1 hour (20°C) 30 minutes (40°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry



subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1. APPLICATION DETAILS: Application method: Brush/roller Conventional spray Airless spray Thinner (max. vol.): Fresh water (15%) Fresh water (15%) Fresh water (5%) Cleaning of tools: Fresh water Indicated film thickness, dry: 30 micron Indicated film thickness, wet: 75 micron Recoat interval, min: 6 hours (10°C) 2 hours (20°C) 1 hour (40°C) Recoat interval, max: None None None Safety: Handle with care. Before and during use, observe all safety labels on packaging and


Product Data Sheet


HEMPEL'S ACRYLIC EMULSION 58720



FILLING: Interior: HEMPEL'S INTERIOR FILLER 38820 Exterior: HEMPEL'S EXTERIOR FILLER 38830 or HEMPEL'S ACRYLIC FILLER 38900 SEALING: HEMPEL’S ACRYLIC PRIMER/SEALER 26630 HEMPEL’S PRIMER/SEALER 28830 REMARKS: Use only where application and drying can proceed at temperatures above 5°C, preferably above

10°C and relative humidity below 85%. Other sealer/filler types may be specified. Drying data given is on the assumption that proper ventilation is provided. Note: HEMPEL'S ACRYLIC EMULSION 58720 is for professional use only. ISSUED BY: HEMPEL A/S - 5872010000CS002






HEMPEL'S SUPER FINE TEXTURE 58770 Description: HEMPEL'S SUPER FINE TEXTURE 58770 is a water-borne paint, which gives a very fine

grain-textured finish for decorative and protective effect on facades and exterior walls. Area of use: Interior and exterior: Walls. Substrates: Concrete, asbestos-cement, cement rendering, and other building materials. PHYSICAL CONSTANTS: Colours/Shade nos: White/10000 Finish: Flat Volume solids, %: 42 ± 1 Theoretical spreading rate: 4.2 m²/litre - 100 micron* Flash point: > 93°C Specific gravity: 1.5 kg/litre Dry to touch: 6 hours (10°C) 3 hours (20°C) 1½ hours (40°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry



subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1. APPLICATION DETAILS: Application method: Brush/roller Conventional spray Airless spray Thinner (max. vol.): Fresh water (15%) Fresh water (15%) Fresh water (5%) Cleaning of tools: Fresh water Indicated film thickness, dry: 100 micron Indicated film thickness, wet: 250 micron Recoat interval, min: 12 hours (10°C) 6 hours (20°C) 3 hours (40°C) Recoat interval, max: None None None Safety: Handle with care. Before and during use, observe all safety labels on packaging and


Product Data Sheet


HEMPEL'S SUPER FINE TEXTURE 58770



FILLING: Interior: HEMPEL'S ACRYLIC FILLER 38900 Exterior: HEMPEL'S FILLER 36610 or HEMPEL'S ACRYLIC FILLER 38900 SEALING: Transparent: HEMPEL'S BINDER/SEALER 09810 Opaque: HEMPEL'S ACRYLIC PRIMER/SEALER 26630 REMARKS: Use only where application and drying can proceed at temperatures above 5°C, preferably above

10°C and relative humidity below 85%. Drying data given is on the assumption that sufficient ventilation is provided.

Other sealer/filler types may be specified. Note: HEMPEL'S SUPER FINE TEXTURE 58770 is for professional use only. ISSUED BY: HEMPEL A/S - 5877010000CS003






HEMPEL'S ROOF COATING 58810 Description: HEMPEL'S ROOF COATING 58810 is a high-build acrylic coating. It forms a durable

elastomeric membrane with excellent flexibility and water-proofing properties. The appearance is slightly textured.

Area of use: Exterior: Roofs. Substrates: Concrete, masonry, woodwork, tiles, steel, PU foam, etc. PHYSICAL CONSTANTS: Colours/Shade nos: White/10000 Finish: Semi-flat Volume solids, %: 54 ± 1 Theoretical spreading rate: 1.1 m²/litre - 500 micron* Flash point: > 93°C Specific gravity: 1.2 kg/litre Dry to touch: 6 hours (10°C) 3 hours (20°C) 1 hour (40°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry



subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1. APPLICATION DETAILS: Application method: Brush/roller Conventional spray Airless spray Thinner (max. vol.): None None None Cleaning of tools: Fresh water Indicated film thickness, dry: 500 micron Indicated film thickness, wet: 850 micron Recoat interval, min: 6-12 hours (10°C) 3-6 hours (20°C) 1-3 hours (40°C) Recoat interval, max: None None None Safety: Handle with care. Before and during use, observe all safety labels on packaging and


Product Data Sheet


HEMPEL'S ROOF COATING 58810



FILLING: Mix 2-3 parts of sand to 1 part of HEMPEL'S ROOF COATING 58810 to fill small cracks in the

concrete. SEALING: On concrete: HEMPEL'S ACRYLIC PRIMER/SEALER 26630 On ferrous metal: HEMPALIN PRIMER 12050 On wood: HEMPEL'S ALKYD UNDERCOAT 22460 REMARKS: Use only where application and drying can proceed at temperatures above 5°C, preferably above

10°C and relative humidity below 85%. Drying data given is on the assumption that proper ventilation is provided. Note: HEMPEL'S ROOF COATING 58810 is for professional use only. ISSUED BY HEMPEL A/S - 5881010000CS010






HEMPEL'S MULTI TEXTURE 58840 Description: HEMPEL'S MULTI TEXTURE 58840 is a high-build, water-borne acrylic coating. The product has non-drip properties and different patterns can be obtained by

combining different application tools. Area of use: Interior and exterior: Walls, ceilings, partitions, etc. Substrates: Concrete, masonry, cement rendering, asbestos, etc. PHYSICAL CONSTANTS: Colour/Shade nos: White/10000 or according to HEMPEL'S colour card Finish: Flat Volume solids, %: 52 ± 1 Theoretical spreading rate: 2.1 m²/litre - 250 micron* Flash point: > 93°C Specific gravity: 1.5 kg/litre Dry to touch: 2 hours (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry




APPLICATION DETAILS: Application method: Brush/roller Conventional spray Air-mix spray/Airless spray Thinner (max. vol.): None None None Cleaning of tools: Fresh water Indicated film thickness, dry: 250 micron Indicated film thickness, wet: 475 micron Recoat interval, min: 8 hours (10°C) 4 hours (20°C) 2 hours (40°C) Recoat interval, max: None None None Safety: Handle with care. Before and during use, observe all safety labels on packaging and


Product Data Sheet


HEMPEL'S MULTI TEXTURE 58840





Other sealer/filler types may be specified. Note: HEMPEL'S MULTI TEXTURE 58840 is for professional use only. ISSUED BY: HEMPEL A/S - 5884010000CS10






HEMPEL'S FINE TEXTURE 58850 Description: HEMPEL'S FINE TEXTURE 58850 is a water-borne acrylic-based coating. Has a fine

granular texture. Different patterns can be obtained by using various application tools. Area of use: Interior and exterior: Walls, ceilings, partitions. Substrates: Concrete, masonry, cement rendering, asbestos, etc. PHYSICAL CONSTANTS: Colours/Shade nos: White/10000 or according to HEMPEL'S colour card Finish: Flat Volume solids, %: 60 ± 1 Theoretical spreading rate: 4.0 m²/litre - 150 micron* Flash point: > 93°C Specific gravity: 1.7 kg/litre Dry to touch: 2 hours (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry




APPLICATION DETAILS: Application method: Brush/roller Conventional spray Air-mix spray Thinner (max. vol.): None None None Cleaning of tools: Fresh water Indicated film thickness, dry: 150 micron Indicated film thickness, wet: 250 micron Recoat interval, min: 8 hours (10°C) 4 hours (20°C) 2 hours (40°C) Recoat interval, max: None None None Safety: Handle with care. Before and during use, observe all safety labels on packaging and


Product Data Sheet


HEMPEL'S FINE TEXTURE 58850





Other sealer/filler types may be specified. When top coating with semi-gloss to high-gloss finishes, spray application is recommended to

obtain the best possible aesthetic appearance to an even overall effect. Note: HEMPEL'S FINE TEXTURE 58850 is for professional use only. ISSUED BY HEMPEL A/S - 5885010000CS006






HEMPEL'S MEDIUM TEXTURE 58860 Description: HEMPEL'S MEDIUM TEXTURE 58860 is a water-borne acrylic-based coating. Has a

medium granular texture. Different patterns can be obtained by using various application tools.

Area of use: Interior and exterior: Walls, ceilings, partitions. Substrates: Concrete, masonry, cement rendering, asbestos, etc. PHYSICAL CONSTANTS: Colours/Shade nos: White/10000 or according to HEMPEL'S colour card Finish: Flat Volume solids, %: 61 ± 1 Theoretical spreading rate: 3.1 m²/litre - 200 micron* Flash point: None Specific gravity: 1.8 kg/litre Dry to touch: 2 hours (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry




APPLICATION DETAILS: Application method: Brush/roller Conventional spray Air-mix spray Thinner (max. vol.): None None None Cleaning of tools: Fresh water Indicated film thickness, dry: 200 micron Indicated film thickness, wet: 325 micron Recoat interval, min: 8 hours (10°C) 4 hours (20°C) 2 hours (40°C) Recoat interval, max: None None None Safety: Handle with care. Before and during use, observe all safety labels on packaging and


Product Data Sheet


HEMPEL'S MEDIUM TEXTURE 58860



FILLING: Filling is normally not required. SEALING: Transparent: HEMPEL'S BINDER/SEALER 09810 Opaque: HEMPEL'S ACRYLIC PRIMER/SEALER 26630 REMARKS: Use only where application and drying can proceed at temperatures above 5°C, preferably above


Other sealer types may be specified. When top coating with semi-gloss to high-gloss finishes, spray application is recommended to

obtain the best possible aesthetic appearance to an even overall effect. Note: HEMPEL'S MEDIUM TEXTURE 58860 is for professional use only. ISSUED BY: HEMPEL A/S - 5886010000CS007






HEMPEL'S COARSE TEXTURE 58870 Description: HEMPEL'S COARSE TEXTURE 58870 is a water-borne acrylic-based coating. Has a

coarse granular texture. Different patterns can be obtained by using various application tools.

Area of use: Interior and exterior: Walls, ceilings partitions. Substrates: Concrete, masonry, cement rendering, asbestos, etc. PHYSICAL CONSTANTS: Colours/Shade nos: White/10000 or according to HEMPEL'S colour card Finish: Flat Volume solids, %: 56 ± 1 Flash point: > 93°C Theoretical spreading rate: 1.9 m/litre - 300 micron* Specific gravity: 1.7 kg/litre Dry to touch: 2 hours (20°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry



subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1. APPLICATION DETAILS: Application method: Brush/roller Conventional spray Air-mix spray Thinner (max. vol.): None None None Cleaning of tools: Fresh water Indicated film thickness, dry: 300 micron Indicated film thickness, wet: 525 micron Recoat interval, min: 8 hours (10°C) 4 hours (20°C) 2 hours (40°C) Recoat interval, max: None None None Safety: Handle with care. Before and during use, observe all safety labels on packaging and


Product Data Sheet


HEMPEL'S EMULSION 58870



FILLING: Filling is normally not required. SEALING: Transparent: HEMPEL'S BINDER/SEALER 09810 Opaque: HEMPEL'S ACRYLIC PRIMER/SEALER 26630 REMARKS: Use only where application and drying can proceed at temperatures above 5°C, preferably above


Other sealer types may be specified. When top coating with semi-gloss to high-gloss finishes, spray application is recommended to

obtain the best possible aesthetic appearance to an even overall effect. Note: HEMPEL'S EMULSION 58870 is for professional use only. ISSUED BY: HEMPEL A/S - 5887010000CS005






HEMPEL'S ACRYLIC EMULSION 58910 Description: HEMPEL'S ACRYLIC EMULSION 58910 is a water-borne, high-grade acrylic finishing coat

providing a flat finish. It is washable and has low dirt pick-up properties. It contains fungicides to prevent growth of fungus and mould. The product has excellent resistance to rain and sunlight and excellent colour stability.

Area of use: Interior and exterior: Walls, ceilings, partitions, etc. Substrates: Concrete, cement rendering, masonry, gypsum boards and wood. PHYSICAL CONSTANTS: Colours/Shade nos: White/10000 or according to HEMPEL'S colour card Finish: Flat Volume solids, %: 41 ± 1 Theoretical spreading rate: 13.7 m²/litre - 30 micron* Flash point: > 93°C Specific gravity: 1.5 kg/litre Dry to touch: 2 hours (10°) 1 hour (20°C) 30 minutes (40°C) *The theoretical spreading rate has been calculated for the stated volume solids and dry



subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1. APPLICATION DETAILS: Application method: Brush/roller Conventional spray Airless spray Thinner (max. vol): Fresh water (20%) Fresh water (10%) Fresh water (5%) Cleaning of tools: Fresh water Indicated film thickness, dry: 30 micron Indicated film thickness, wet: 75 micron Recoat interval, min: 4 hours (10°C) 2 hours (20°C) 1 hour (40°C) Recoat interval, max: None None None Safety: Handle with care. Before and during use, observe all safety labels on packaging and


Product Data Sheet


HEMPEL'S ACRYLIC EMULSION 58910




10°C and relative humidity 85%. Drying data given is on the assumption that proper ventilation is provided. Note: HEMPEL'S ACRYLIC EMULSION 58910 is for professional use only. ISSUED BY HEMPEL A/S - 5891010000CS005



Download - HEMPEL Decorative Eng

Top Related