HEMPEL Decorative Eng

Download HEMPEL Decorative Eng

Post on 05-Mar-2015

361 views

Category:

Documents

0 download

Embed Size (px)

TRANSCRIPT

<p>HEMPEL</p> <p>Product Data Manual</p> <p>PRODUCT DATA SHEETS NUMERICAL INDEX DECORATIVE PAINTS</p> <p>Product No. 02350 02450 02500 05250 05570 05990 06600 09810 22460 26600 26630 28600 28830 35230 36610 38820 38830 38860 38900 45450 46600 48600 48740 52040 52060 52080 52410 52940 52980 55100 55210 56360 56610 56620 58100 58230 58260 58270 58330 58410 58440 58470 58540 58610 58650 58660 58670 58680 58710 58720 58770 58810 58840 58850 58860 58870 58910</p> <p>Product Name</p> <p>Date</p> <p>TRATAMIENTO FONDO................ November 2008 HEMPELS WOOD STAIN... October 2006 HEMPELS COLOUR VARNISH.. October 2006 HEMPELS PARQUET VARNISH. October 2006 HEMPEL'S P/U LACQUER..0ctober 2006 HEMPELS EPOXY SEALER... October 2006 HEMPELS BINDER/SEALER.... October 2006 HEMPELS BINDER/SEALER. October 2006 HEMPELS ALKYD UNDERCOAT... October 2006 HEMPELS CONTEX SEALER . October 2006 HEMPELS ACRYLIC PRIMER/SEALER. October 2006 HEMPELS CONTEX PRIMER W/B....... October 2006 HEMPELS PRIMER/SEALER.... October 2006 HEMPELS EPOXY FILLER..... October 2006 HEMPELS FILLER... October 2006 HEMPELS INTERIOR FILLER. October 2006 HEMPELS EXTERIOR FILLER.October 2006 HEMPELS SPATTER FINISH . October 2006 HEMPELS ACRYLIC FILLER . October 2006 HEMPELS EPOXY TEXTURE . October 2006 HEMPELS CONTEX SMOOTH October 2006 HEMPELS CONTEX SMOOTH W/B.. October 2006 HEMPELS SMOOTH TEXTURE.. October 2006 HEMPELS GLOSS ENAMEL . October 2006 HEMPELS FLAT ENAMEL. . October 2006 HEMPELS SEMI-GLOSS ENAMEL.October 2006 HEMPELS METALLIC PAINT . October 2006 HEMPALUX GLOSS.. October 2006 HEMPALUXSEMI-GLOSS . October 2006 HEMPATHANEENAMEL... October 2006 HEMPATHANETOPCOAT.... September 2006 HEMPATEXENAMEL. October 2006 HEMPELS CONTEX FINE. . October 2006 HEMPELS CONTEX MEDIUM.October 2006 HEMUCRYLENAMEL . October 2006 HEMUCRYLTOPCOAT HI-BUILD.. October 2006 HEMPELS ACRYLIC SILK EMULSION.. October 2006 HEMPELS NON-DRIP ACRYLIC EMULSION. October 2006 HEMPELS SILK EMULSION . October 2006 HEMPELS CONTRACT EMULSION... October 2006 HEMPELS WALL VARNISH November 2009 HEMPELS WALLART.. October 2006 HEMPELS SILK TEXTURE. . October 2006 HEMPELS INTERIOR EMULSION.. October 2006 HEMPELS GLOSS EMULSION.. October 2006 HEMPELS RUSTIK-2.. October 2006 HEMPELS RUSTIK-3.. October 2006 HEMPELS RUSTIK-5.. October 2006 HEMPELS FLAT EMULSION.. October 2006 HEMPELS ACRYLIC EMULSION October 2006 HEMPELS SUPER FINE TEXTURE. October 2006 HEMPELS ROOF COATING... October 2006 HEMPELS MULTI TEXTURE... October 2006 HEMPELS FINE TEXTURE.. October 2006 HEMPELS MEDIUM TEXTURE...October 2006 HEMPELS COARSE TEXTUREOctober 2006 HEMPELS ACRYLIC EMULSION October 2006</p> <p>Issued: November 2009</p> <p>Page 1 of 1</p> <p>Product Data Sheet</p> <p>Product DataTRATAMIENTO FONDO 02350Description: TRATAMENTO FONDO 02350 is a transparent wood preservative based on modified alkyd. Good penetration into new and old wood. The product contains biocide to prevent growth of fungus and mould and UV filter to reduce the degrading effect of the sunlight. Wooden structures. Wood. Transparent/00000 Flat 10 1 Not relevant (see REMARKS below) 43C 0.8 kg/litre 8 hours (20C)The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.</p> <p>Area of use:</p> <p>Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch:</p> <p>APPLICATION DETAILS: Application method: Thinner (max. vol.): Cleaning of tools: Recoat interval, min: Recoat interval, max: Surface condition:</p> <p>Brush Dipping None None THINNER 08230 or 08110 24 hours (20C) (see REMARKS below) None The surface should be stable, firm, dry and free of contaminants like dust, dirt, oil, grease and fungus. TRATAMENTO FONDO02350 should be applied wet-on-wet until full saturation is obtained. Wipe off any excess material to avoid a glossy surface after drying. The consumption will depend on the ability of the wood to absorb the preservative, but a 2 guideline for practical coverage will be 3-5 m /litre in the case of rough wood and 4-6 2 m /litre in the case of dressed wood. TRATAMENTO FONDO02350 is most effectively applied by brush. Cut ends should, if possible, be dipped. Drying data is given on the assumption that proper ventilation is provided. Recoating with products dissolved in white spirit may take place after 24 hours (20C). For optimum protection against sunlight, recoat with HEMPEL'S WOODSTAIN 02450. TRATAMENTO FONDO 02350 is for professional use only.</p> <p>Remarks:</p> <p>Note: Safety:</p> <p>Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas. HEMPEL A/S - 0235000000CS003</p> <p>ISSUED BY:</p> <p>This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, see Explanatory Notes in the HEMPEL Book. Data, specifications, directions and recommendations given in this data sheet represent only test results or experience obtained under controlled or specially defined circumstances. Their accuracy, completeness or appropriateness under the actual conditions of any intended use of the Products herein must be determined exclusively by the Buyer and/or User. The Products are supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in writing. The Manufacturer and Seller disclaim, and Buyer and/or User waive all claims involving, any liability, including but not limited to negligence, except as expressed in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising from the use of the Products as recommended above, on the overleaf or otherwise. Product data are subject to change without notice and become void five years from the date of issue.</p> <p>Issued: November 2008</p> <p>Page 1 of 1</p> <p>HEMPEL Product Data Sheet</p> <p>Product DataHEMPEL'S WOOD STAIN 02450Description: HEMPEL'S WOOD STAIN 02450 is a durable modified alkyd-based wood stain for protection of all types of wood. The product contains biocides to prevent growth of fungus and mould. Contains UV filter to reduce the degrading effect of the sunlight. Wooden structures. Wood. Teak/08563 or according to HEMPEL's colour card Flat 36 1 Not relevant (see REMARKS below) 42C 0.9 kg/litre 8 hours (20C)The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.</p> <p>Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch:</p> <p>APPLICATION DETAILS: Application method: Thinner (max. vol.): Cleaning of tools: Recoat interval, min: Recoat interval, max: Surface condition:</p> <p>Brush None THINNER 08230 or 08110 (20%) 8 hours (20C) None</p> <p>Dipping None THINNER 08230 or 08110 (20%)</p> <p>The surface should be stable, firm, dry and free of contaminants like dust, sand, loose old paint, dirt, oil, grease and algae. The moisture content of the wood should not exceed 16 %. Avoid cleaning or grinding of the surface with steel wool or similar as this may cause rust stains. New wood (except teak and vacuum impregnated wood) and bare spots of previously treated wood should be saturated with HEMPEL'S WOOD PRESERVATIVE 02350. Do not apply under humid conditions or at temperatures below 5C. The consumption will depend on the ability of the wood to absorb HEMPEL'S WOOD STAIN 02450, but a guideline for practical coverage is 5-10 m2/litre in the case of rough and absorbing wood and 10 -20 m2/litre in the case of dressed wood. Certain hard wood types may require thinning up to 20% to ensure proper penetration. HEMPEL'S WOOD STAIN 02450 is most effectively applied by brush. Drying data is given on the assumption that proper ventilation is provided. Apply 1 or more coats to obtain the desired colour and a uniform appearance. Different colours will be obtained depending on the type of wood and the ability of the wood to absorb the material. Please note that the shade becomes darker after repeated treatment. HEMPEL'S WOOD STAIN 02450 is for professional use only. Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas. HEMPEL A/S - 0245008563CS004</p> <p>Wood preserver: Remarks:</p> <p>Note: Safety:</p> <p>ISSUED BY:</p> <p>This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, see Explanatory Notes in the HEMPEL Book. Data, specifications, directions and recommendations given in this data sheet represent only test results or experience obtained under controlled or specially defined circumstances. Their accuracy, completeness or appropriateness under the actual conditions of any intended use of the Products herein must be determined exclusively by the Buyer and/or User. The Products are supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in writing. The Manufacturer and Seller disclaim, and Buyer and/or User waive all claims involving, any liability, including but not limited to negligence, except as expressed in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising from the use of the Products as recommended above, on the overleaf or otherwise. Product data are subject to change without notice and become void five years from the date of issue.</p> <p>Issued: October 2006</p> <p>Page 1 of 1</p> <p>HEMPEL Product Data Sheet</p> <p>Product DataHEMPEL'S COLOUR VARNISH 02500Description: HEMPEL'S COLOUR VARNISH 02500 is a quick-drying, clear urethane varnish. The product is available in many attractive colours and is used for interior and exterior decoration of wood. Contains UV filter to reduce the degrading effect of the sunlight. Interior and Exterior: Windows and door frames, skirting, furniture, etc. Wood. Red/08569 or according to HEMPEL's colour card Glossy 46 1 18.4 m/litre - 25 micron* 38C 0.9 kg/litre 3 hours (20C) *The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate and the relevant consumption factor.The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.</p> <p>Area of use: Substrates: PHYSICAL CONSTANTS: Colours/Shade nos: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch:</p> <p>APPLICATION DETAILS: Application method: Thinner (max. vol.): Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Surface condition: Wood preserver: Remarks:</p> <p>Flat varnish brush 1st coat (20%) 2nd coat (10%) 3rd coat (None) THINNER 08230 or 08110 25 micron 50 micron 6 hours (20C) None The surface should be stable, firm, dry and free of contaminants like dust, old paint, dirt, oil, grease and algae. The moisture content of the wood should not exceed 16 %. New wood (except teak and vacuum impregnated wood) and bare spots of previously treated wood should be saturated with HEMPEL'S WOOD PRESERVATIVE 02350. Do not apply under humid conditions or at temperatures below 5C. Drying data is given on the assumption that proper ventilation is provided. Apply one or more coats to obtain the desired colour and a uniform appearance. When the desired colour is obtained, apply HEMPEL'S COLOUR VARNISH 02500 until the required finish and protection is achieved. A total of four coats is normally required on new wood, depending on the wood type. As the product is partly transparent, the resulting colour will depend on the type and colour of the wood. HEMPEL'S COLOUR VARNISH 02500 is for professional use only. Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas. HEMPEL A/S - 0250008569CS003</p> <p>Note: Safety:</p> <p>ISSUED BY:</p> <p>This Product Data Sheet supersedes those previously issued. For explanations, definitions and scope, see Explanatory Notes in the HEMPEL Book. Data, specifications, directions and recommendations given in this data sheet represent only test results or experience obtained under controlled or specially defined circumstances. Their accuracy, completeness or appropriateness under the actual conditions of any intended use of the Products herein must be determined exclusively by the Buyer and/or User. The Products are supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in writing. The Manufacturer and Seller disclaim, and Buyer and/or User waive all claims involving, any liability, including but not limited to negligence, except as expressed in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or damages arising from the use of the Products as recommended above, on the overleaf or otherwise. Product data are subject to change without notice and become void five years from the date of issue.</p> <p>Issued: October 2006</p> <p>Page 1 of 1</p> <p>HEMPEL Product Data Sheet</p> <p>Product DataHEMPEL'S PARQUET VARNISH 05250Description: HEMPEL'S PARQUET VARNISH 05250 is a one-component moisture curing, clear polyurethane varnish. The product is easy to apply and has good adhesion to wood. It gives a flexible but hard glossy surface, resistant to normal wear on wooden floors. It is ideal in kitchens and other areas where spillage of foodstuff and domestic cleaning agents may occur. Interior: New or previously varnished parquet floors and other wooden items such as stairs, handrails, windows, doors, etc. Wood. Transparent/00000 Glossy 35 1 14...</p>