power technique products and services warranty - atlas copco

Products and Services Warranty

Atlas Copco Australia Pty Ltd – PowerTechnique Products and Services Warranty

ABN 85 620 125 153HEAD OFFICE: 3 Bessemer street Blacktown, NSW, 2148, Australia

Phone: 1300 667 044 Fax: (02) 9624 1600

Effective: 202

Atlas Copco Australia Pty Ltd – Power TechniqueA.B.N. 85620125153 Date: J 202

Page: 1 of 10Date: 01 Jan 2022Page: 1 of 11


Atlas Copco Australia Pty Ltd – Power TechniqueProducts and Services Warranty

1 WARRANTY1.1 SCOPE

This warranty clause applies to:New Products (which include parts); and Atlas Copco Labour,

sold by Atlas Copco Australia Pty Ltd – Power Technique.Each of these is a Warranted Item.

(a) Subject to the Exclusions, Exceptions and Cancellation Events listed in clauses 1.3,1.4 and 1.5 below, Atlas Copco Australia Pty Ltd (Atlas Copco) warrants to the firstpurchaser (First Purchaser) of a Warranted Item that Atlas Copco will, (at Atlas Copco’soption):(i) repair1, replace or adjust (in Atlas Copco’s absolute discretion and at an Atlas

Copco Nominated Premises) any New Product that has a defect in materials orworkmanship (Product Defect);

(ii) repair, replace or adjust (in Atlas Copco’s absolute discretion and at an AtlasCopco Nominated Premises) any defect in any Atlas Copco Labourworkmanship (Atlas Copco Labour Defect);

(iii) repair1, at an Atlas Copco Nominated Premises, any damage to Atlas Copcoequipment (including, to avoid doubt, a New Product) (Damaged AtlasCopco Equipment) that is caused by a Product Defect or by an Atlas CopcoLabour Defect (Damage)2,

provided that the Defect or Damage is reported to Atlas Copco, in writing, within the relevant Warranty Period and the Warranty Claims Process in clause 1.10 is followed.1Atlas Copco may (in its absolute discretion) choose to replace a New Product, or replace Damaged Atlas Copco Equipment, rather than repair it. It may choose to do this at any time (including after it has started a repair).2only where the defective New Product was installed in the Damaged Atlas Copco Equipment, or where the workmanship defect was in work performed on the Damaged Atlas Copco Equipment (as the case may be).

The Warranty does not cover, and Atlas Copco has no obligation or liability of any kind (however arising – including by negligence) for, damage caused to non Atlas Copco equipment by a Defect.

Atlas Copco Labour means work performed by Atlas Copco on Atlas Copco equipment or non Atlas Copco equipment.

Atlas Copco Nominated Premises means a servicing facility nominated by AtlasCopco.Damage means the damage referred to in clause 1.1(a)(iii) above.




Defect means a New Product Defect or an Atlas Copco Labour Defect (see clause1.1(a)(i) and clause 1.1a(ii) above).

New Product means a new Atlas Copco product described in clause 1.2(a) below, but excludes anything listed in clause 1.3(a).Warranty means the warranty described in this clause 1.1.

Warranty Period means the warranty periods in clause 1.2.Transportation and Field Work(b) The First Purchaser is responsible (solely at its cost) for all freight and transport to send

a Warranted Item (and any Damaged Atlas Copco Equipment) to, and pick it up from,the Atlas Copco Nominated Premises as directed by Atlas Copco. To avoid doubt, thisincludes heavy lifting, towing, loading and unloading. If Atlas Copco (in its absolutediscretion) agrees to work on a Warranted Item in the field (which, to avoid doubt,includes removing and re-installing a Warranted Item) (Field Work), then: (i) the FirstPurchaser must (solely at its cost) provide Atlas Copco personnel with safe access tothe Warranted Item; (ii) the Field Work will be a service and will be taken to have beenprovided under the Atlas Copco Australia Pty Ltd – Power Technique Standard Termsand Conditions of Sale current at the time the Field Work is performed (a current copy isavailable at any time on request); and (iii) the First Purchaser must pay for the FieldWork on a time and materials basis at Atlas Copco’s standard rates current at the timethe Field Work is performed. A copy of Atlas Copco’s current standard rates is availableat any time on request.

Second Hand Components and Parts(c) The Warranty does not apply (in any way) to second hand parts.Replacement Parts(d) Atlas Copco may (in its absolute discretion) replace parts or components with new parts

or new components or with rebuilt parts or components.

(e) Warranty Periods do not extend under any circumstances (for example, and withoutlimitation, if a Defect in a Warranted Item is repaired, then the Warranty Period for theWarranted Item does not extend – regardless of how long the Warranted Item wasunavailable as a result of the Defect or how long it took to repair it).

Warranty Period Overlap(f) If a Warranted Item is installed into a new Atlas Copco product that is still under an

Atlas Copco new product warranty, then the Warranty Period for that Warranted Item(while it remains part of that product) will be:(i) the balance of the warranty period for that new Atlas Copco product3 if that

period is greater than or equal to the Warranty Period for the Warranted Item; or(ii) the Warranty Period for the Warranted Item if the Warranty Period for the

Warranted Item is greater than the balance of the warranty period for that product.3Warranty periods for new Atlas Copco products are available from Atlas Copco on request.

Benefit(g) The Warranty applies solely to the First Purchaser of a Warranted Item and is not

transferrable under any circumstances (including, without limitation, where theWarranted Item is sold, given away or compulsorily acquired). To avoid doubt, the




Warranty does not apply where the Warranted Item is leased, rented or otherwise made available to anyone other than the First Purchaser.

1.2 WARRANTY PERIODSThe Warranty Periods for the Warranted Items are set out in the tables below.(a) New Products

Warranted Item Warranty Period

(i) All new products (including, to avoid Warranty Period varies according to typedoubt, compressors and generators) sold of New Product. Warranty Period isby Atlas Copco Australia Pty Ltd – Power available from Atlas Copco on request.Technique, below.

(ii) Compressor Models: U110, U75, (a) The Warranty Period is 12 (twelve)U190, U130 , U175, U250, XAS 38,XAS months from date of supply by Atlas48, XAS 68, XAS 88, XAS 58 , XATS 68, Copco Australia Pty Ltd – PowerXAS 138 LRC, XAS 135, XAHS 108 LRC, Technique or 2000 hours of operationXAS 130 DD, XAHS 375, XAS 27 Hp, XAS whichever occurs first65 HP7, XAS 37 Kd, XAS 70 KD7, XAS 47Kd, XAS 90 KD7, XAS 67 Kd, XAS 130KD7, XAS 47 Dd, XAHS 37 Dd, XAS 90DD7, XAHS 70 DD7, XAS 57 Dd, XAS 110DD7, XAS 130 DD7, XATS 67 Dd, XAS185 ,XATS 125 DD7, XAS 77 Dd, XAS 150DD7, XAS 97 Dd, XAS 185 DD7, XAS 186Dd (C2), XAS 375 DD6 (C2), XAS 186 Dd(C3), XAS 375 DD6 (C3), XATS 156 Dd(C2), XATS 350 DD6 (C2), XATS 156 Dd(C3), XATS 350 DD6 (C3), XAHS 146 Dd(C3), XAHS 350 DD6 (C3), XAHS 186 Dd(C3), XAHS 375 DD6 (C3), XAVS 166 Dd(C3), XAVS 340 DD6 (C3)

(iii) Compressor Models: XAS 137 Kd (a) The Warranty Period is 12 (twelve)(C2), XAS 300 KD7 (C2), XAS 137 Kd months from date of supply by Atlas(C3), XAS 300 KD7 (C3), XAHS 107 Dd Copco Australia Pty Ltd – Power(C2), XAHS 250 Dd7 (C2), XAHS 107 Dd Technique or 2000 hours of operation(C3), XAHS 225 Dd7 (C3), XAS 137 Dd, whichever occurs first.XAS 300 DD7, XA 300 DD7, XAT 156 Dd,XAVS 136 Dd, XAT 350 DD6, XAVS 280DD6, XATS 156 Dd, XATS 350 Dd6, XAHS186 Dd, XAVS 196 Dd, XA 186 Dd, XA 375Dd, XAS 186 Dd, XAS 375 DD6

(iv) Compressor Models: XAMS 287 Dd, (a) The Warranty Period is 12 (twelve)XAHS 237 Dd, XAMS 600 DD7, XAHS 500 months from date of supply by AtlasDD7, XAMS 307 Dd, XATS 277 Dd, XAHS Copco Australia Pty Ltd – Power257 Dd, XAVS 237 Dd, XAS 700 DD7, Technique or 2000 hours of operation




XAMS 650 DD7, XATS 600 DD7, XAHS whichever occurs first.550 DD7, XAVS 500 Dd7, XAMS 407 Cd,XATS 377 Cd, XAHS 347 Cd, XAVS 307Cd, XAMS 850 CD7, XATS 800 CD7,XAHS 710 CD7, XAVS 650 CD7, XAMS407 Cd, XATS 377 Cd, XAHS 347 Cd,XAVS 307 Cd, XAXS 277 Cd, XAMS 850CD7, XATS 800 CD7, XAHS 710 CD7,XAVS 650 CD7, XAXS 600 Cd7, XAMS850 Dd7, XATS 800 Dd7, XAHS 710 Dd7,XAVS 650 Dd7, XAXS 600 Dd7, XAMS527 Cd, XATS 487 Cd, XAHS 447 Cd,XAVS 407 Cd, XRS 396 Cd, XRHS 366Cd, XAMS 1150 CD7, XATS 1050 CD7,XAHS 950 CD7, XAVS 900 CD7, XRS 830CD6, XRHS 800 CD6, XAS 746 Cd, XAS1600 CD6, XRHS 506 Cd, XRHS 1100CD6, XRHS 366, XRHS 506, XATS900E

(v) Compressor Models: XAS 185 CD, (a) The Warranty Period is 12 (twelve)XAS 375 CD, XRVS 336 Cd, XRVS 700 months from date of supply by AtlasCD6, XRVS 476 Cd, XRVS 1000 CD6, Copco Australia Pty Ltd – PowerXRVS 336, XRVS 476, XRVS 617, XRVS Technique or 2000 hours of operation647 Cd, XRVS 1350 CD7, XRXS 567, whichever occurs first.XRXS 607 Cd, XRXS 1275 CD7, XRYS577, XRYS 577 Cd, XRYS 1260 CD7,XRVS 617 Cd, XRVS 1300 CD7, XRXS567 Cd, XRXS 1240 CD7, XRXS 567 CD,XRXS 1240 CD7, XRYS 557 CD, XRVO727 Cd, XRXO 667 Cd, XRVO 1550 CD7,XRXO 1400 CD7, XAH 1066 Cd, XAH2250 CD6, XRV 946 Cd, XRV 2000 CD6

(vi) Generator Models: QAS 14Kd, QAS (a) The Warranty Period is 12 (twelve)20Kd, QAS 15Kd, QAS 24Kd, QAS 30Kd, months from date of supply by AtlasQAS 40Kd Copco Australia Pty Ltd – Power

Technique or 2000 hours of operationwhichever occurs first.

(vii) Generator Models: QAC 750-1000, (a) The Warranty Period is 12 (twelve)QAC 1100, QAC 1250, QAC1450 months from date of supply by Atlas

Copco Australia Pty Ltd – PowerTechnique or 2000 hours of operationwhichever occurs first.




(viii) Generator Models: QAC 500 (a) The Warranty Period is 12 (twelve)months from date of supply by AtlasCopco Australia Pty Ltd – PowerTechnique or 2000 hours of operationwhichever occurs first.

(ix) Generator Models: QAS 14Pd, QAS (a) The Warranty Period is 12 (twelve)20Pd, QAS 35 Kubota, QAS 45 Kubota, months from date of supply by AtlasQAS 60 Perkins,QAS 80 Perkins, QAS 100 Copco Australia Pty Ltd – PowerPerkins Technique or 2000 hours of operation

whichever occurs first.

(x) Generator Models: QAS 45 Kubota, (a) The Warranty Period is 12 (twelve)QAS 70, QAS 90, QAS 120, QAS 80 months from date of supply by AtlasCummins, QAS 95 Cummins, QAS 100 Copco Australia Pty Ltd – PowerCummins, QAS 115 Cummins, QAS 125 Technique or 2000 hours of operationCummins, QAS 135 Cummins, QAS 125 whichever occurs first.Volvo, QAS 135 Cummins, QAS 150, QAS200, QAS 275, QAS 325, QAS 500, QAS600, QAS 250, QAS 330, QAC 1250, QLTLighting towers, QAS 25 Kd

(xi) Stationary Generators: (a) The Warranty Period is 12 (twelve)QIS 415 VOD, QIS 330, QIS 25 months from date of supply by AtlasQIS 90 JD QIS 45 QIS 16 QIS 70 JD Copco Australia Pty Ltd – PowerQIS 830 QIS 110 JD Technique or 2000 hours of operationQIS 505 VOD QIS 1250 MD QIS 630 whichever occurs first.

QIS 355 VOD QIS 175 JD QIS 135 JDQIS 35 QIS 10 QIS 580 QIS 220 (a) The Warranty Period is 12 (twelve)QIS 655 VOD QIS 60 JD QIS 65 QIS 95 months from date of supply by AtlasQIS 115 QIS 140 QIS 275 VOD QIS 735 Copco Australia Pty Ltd – PowerQIS 1015 MD QIS 510 QIS 435 VOD Technique or 2000 hours of operationQIS 545 VOD whichever occurs first.

(xii) Light Towers: (a) The Warranty Period is 12 (twelve)HILIGHT H5+, months from date of supply by AtlasHILIGHT B5+ KD, HILIGHT V3+, HILIGHT V2+ Copco Australia Pty Ltd – PowerHILIGHT P2+ HILIGHT Z3+ HILIGHT B5+ Technique or 2000 hours of operationHILIGHT V5+, CPLT V15, CPLT P2, CPLT V3





(xiii) Boosters (a) The Warranty Period is 12 (twelve)

B7-41, BOOSTER B7-41/1000 months from date of supply by AtlasBOOSTER B18- 63/3000 , Copco Australia Pty Ltd – PowerBOOSTER B13-63/5000 Technique or 2000 hours of operation


(xiv) Portable Pump (a) The Warranty Period is 12 (twelve)

WEDA10, PAS 200 MF 305, VAR 4-250, months from date of supply by Atlas

VAR 6-250 , PAS 150 MF 250 ,PAS 100 MF 250 Copco Australia Pty Ltd – Power

VAR 10-305, ETP 100 D , LB 100 D, Technique or 2000 hours of operation

ETP 80 B ETP 100 B ETP 50 B WEDA60S whichever occurs first.

WEDA40N WEDA30N PAS 6 PAS 4

WEDA90L WEDA70L WEDA70H PAS 150 HF

WEDA50H WEDA04 WEDA04B WEDA04S

WEDA08 WEDA08S WEDA30L WEDA50N+

WEDA30S PAS 150 HF T4FPAS 150 MF 250 CNP WEDA D30NPAS 100 MF 250 CNP PAS 300 HF T4F CNP

PAS 100 HF T4F CNP

PAS 150 HF 300 CNP WEL PST 100 CNP

WEDA S60N WEDA D30L WEDA90HPAS 8 WEDA60N WEDA100 WEDA50NWEDA D50H WEDA D04N-230WEL TANK 150 PAS 300 HF 440 CNPPAS 200 HF 305 CNP PAS 300 HF 440 CNP PUPAS 150 HF 300 CNP PU PAS 150 HF 300PAS 100 HF T4F PAS 80 MF CNPPAS 80 MF 202 CNPWEDA D10N WEDA60N+PAS 150 HF CNP WEDA60H

(a) The Warranty Period is 12 (twelve)months from date of supply by AtlasCopco Australia Pty Ltd – PowerTechnique or 2000 hours of operationwhichever occurs first.

(xv) All new parts sold by Atlas Copco Ninety 90 days from date of supply by

Australia Pty Ltd – Power Technique Australia Pty Ltd – Power Technique

3For the purposes of this clause 1.2, hours of operation are calculated by Atlas Copco. If there is a discrepancy between the hours displayed by the Product and the hours obtained from other sources (including any log files), then Atlas Copco may (acting reasonably) estimate the hours of operation. This applies even if there is a defect in the hour counter.

(b) Atlas Copco LabourWarranted Item Warranty PeriodAll Atlas Copco labour sold by Australia Pty Thirty (30) days after the work isLtd – Power Technique performed.

To avoid doubt, if the work involves anumber of discrete tasks, the 30 dayperiodapplies to each discrete task andcommences when the discrete task hasbeen completed,

Atlas Copco Australia Pty Ltd- Power TechniqueA.B.N. 85620125153 Date: 01 Jan 2022

Page: 7 of 11


1.3 EXCLUSIONS(a) The following items are not covered by the Warranty:

(i) anything that requires replacement as a result of normal use or wear;(ii) rubber goods;(iii) couplings(iv) normal consumable and wear parts;(v) lubricating oil, grease and coolant, air filter elements, oil filter elements and

lubricating oil filter elements;(vi) anything that Atlas Copco has reasonable grounds for believing has been

obtained illegally;(vii) third party engines* (which, to avoid doubt, includes (where relevant) the

crankcase, cylinder block, cylinder head, crankshaft, camshaft, connecting-rod,pistons, gears, flywheel, flywheel housing, oil pump, pulleys, governor, Inletmanifold and oil pan);

(viii) any maintenance items not covered above (including, to avoid doubt:belts, gaskets, hoses, fuses, filters, fluids, tyres, brakes and batteries); and

(ix) labour for any work on a Warranted Item in the field (including removal andreinstallation) – see clause 1.1(b) above.

* Customer may be entitled to make a warranty claim against the third partymanufacturer of an engine under the third party manufacturer’s engine warranty.

(b) To avoid doubt, 1.3(a)(i) – 1.3(a)(viii) above are not Warranted Items even if they are (orform part of) a New Product.

1.4 EXCEPTIONSThe Warranty does not cover any Defects or any Damage that arise from, or that are caused or contributed to by, any of the following:(a) anything listed in clause 1.3(a) above;(b) any abnormal use or any use outside Australia;(c) use of non Atlas Copco authorised parts, accessories or fluids (including,

without limitation, use of non Atlas Copco authorised filters, fluids or lubricants);(d) use of lubes, oils or fuels that do not conform to Atlas Copco recommendations;(e) work performed on the Warranted item (or, to avoid doubt, any part of it) by

anyone other than Atlas Copco or an authorized Atlas Copco service agent;(f) an act or omission relating to maintenance or repairs (including, without limitation,

any failure to follow any prescribed or recommended maintenance or repairrecommendations or guidelines and any lack of routine maintenance);

(g) any failure to carry out any recommended checks (including, without limitation,any checks in any Warranted Item documentation);

(h) improper handling, storage or protection of a Warranted Item;




(i) failure to operate a Warranted Item in accordance with the manufacturer’s operatinginstructions, practices or guidelines (including, to avoid doubt, in accordance withan instruction manual);

(j) use of a Warranted Item for any purpose other than its intended purpose;(k) exceeding any capacity or operating limits;(l) use of a Warranted Item by unqualified operators;(m) alterations, additions or modifications made to a Warranted Item (or, to avoid doubt,

any part of it) without Atlas Copco’s express written consent;(n) abuse, misuse, negligence (including, without limitation, negligent repairs) or intentional

misuse;(o) corrosion, erosion or normal wear and tear;(p) exposure to radioactive material or radiation of any kind;(q) use of a Warranted Item after the First Purchaser (or any of its personnel) become aware,

or ought to have become aware, of any form of fault in (or problem with) a Warranted Item(including, to avoid doubt, any abnormal operation or any leaks, noises or faults that couldcause damage (or additional damage) to a Warranted Item); or

(r) without limiting (a) – (q) above, any damage of any kind (whether the damage occurredaccidentally, negligently, deliberately or otherwise), however caused (including, withoutlimitation, by towing) and whether caused by the First Purchaser, the First Purchaser’spersonnel or any third party – including, without limitation, a carrier).

1.5 CANCELLATION EVENTSIf any of the following occur in relation to a Warranted Item, then without limiting clause 1.3, clause 1.4 or any other right or remedy of Atlas Copco, Atlas Copco may, in its absolute discretion and by notice, immediately cancel the Warranty on that Warranted Item:(a) use of non Atlas Copco authorised parts, accessories or fluids (including,

without limitation, use of non Atlas Copco authorised filters, fluids or lubricants);(b) alterations, additions or modifications made to a Warranted Item (or, to avoid doubt, any

part of it) without Atlas Copco’s express written consent;(c) damage of any kind (whether the damage occurred accidentally, negligently, deliberately or

otherwise, however caused (including, without limitation, by towing) and whether caused bythe First Purchaser, the First Purchaser’s personnel or any form of third party– including, without limitation, a carrier);

(d) Atlas Copco has reasonable grounds for believing that the Warranted Item (or, toavoid doubt, any part of it) has been obtained illegally; or

(e) the First Purchaser fails to comply with the obligation in clause 1.9(c).To avoid doubt, if (for any reason) the Warranty on a Warranted Item is cancelled then AtlasCopco is not required to provide any form of compensation of any kind in any form(including without limitation, in cash, in kind or by way of credit or discount – whether on theWarranted Item or any other product or service).SeverabilityThe parties agree that if all or part of this clause 1.5 is found (for any reason) to be illegal or unenforceable, then it may be severed without affecting the rest of this clause 1 or any provision in an agreement that this clause 1 has been incorporated into.

1.6 OTHER WARRANTIES AND INCONSISTENCY




(a) If there is a warranty in an agreement that this clause 1 has been incorporated into, andthat warranty covers any form of defect or repair of a Warranted Item, then subject to(c), this clause 1 will replace that warranty.

(b) If there is an inconsistency between a provision in this clause 1 and a warrantyprovision in an agreement that this clause 1 has been incorporated into, then theprovision in this clause 1 prevails to the extent of the inconsistency.

(c) If the warranty clause in an agreement referred to in (a) above contains warrantyprovisions and other provisions (for example, and without limitation, clauses excludingor limiting liability), then only the warranty provisions are replaced by this clause andthose other provisions are not replaced.

1.7 SOLE REMEDY

Subject to clause 1.8, and to the maximum extent permitted by law, the rights and remedies in this clause 1 are the First Purchaser’s sole and exclusive remedies for any defect of any kind in a Warranted Item, any defect of any kind in any Atlas Copco Labour, any damage of any kind to an Atlas Copco product that is caused by a Warranted Item or that is caused by any defect in any Atlas Copco Labour workmanship.

1.8 NON EXCLUDABLE RIGHTS

Nothing in this Warranty affects any non-excludable statutory rights or statutory remedies that the First Purchaser may have under State, Territory or Federal legislation.

1.9 FIRST PURCHASER REPORTING OBLIGATIONSThe First Purchaser must:(a) inform Atlas Copco immediately of any leaks, noises or faults that could result in

damage (or additional damage) to a Warranted Item, or to any Atlas Copco equipmentreferred to in clause 1.1(a)(iii);

(b) report any other potential warranty issue or concern to Atlas Copco as soon aspossible after becoming aware of it; and

(c) if a Warranted Item is to be used within a nuclear facility, immediately notify Atlas Copcoof such use so that Atlas Copco may arrange for appropriate nuclear liability protectionfrom the owner-licensee of the facility.

To avoid doubt, providing any of the information referred to above does not affect any of the exclusions in clause 1.3, exceptions in clause 1.4 or cancellation rights in clause 1.5, or in any way increase Atlas Copco’s obligations or liability under the Warranty or otherwise.

1.10 WARRANTY CLAIMS PROCESS(a) Accurate serial number, and a description of the problem, must be provided. The

serial number must match the Warranted Item.(b) First Purchaser identification (eg certificate of incorporation) must be provided. Proof

of first purchase (such as receipt or invoice) must also be provided.1.11 IMPORTANT INFORMATION FOR CONSUMERS

The following information is provided for Consumers pursuant to the Australian Consumer Law. This clause only applies to Consumers under the Australian Consumer Law. To the maximum extent permitted by law, this clause does not in any affect the Warranty as set out in clauses 1.1 to 1.10 above.




(a) The Warranty provided by Atlas Copco is set out in clause 1.1 above.

(b) The Warranty Periods are set out in clause 1.2 above.

(c) The Warranty is given by Atlas Copco Australia Pty Ltd – Power Technique of3 Bessemer Street Blacktown NSW 2148 (Phone: 1300 667 044, email:[email protected]).

(d) To make a Warranty claim, you must:(i) report the Defect or Damage to Atlas Copco, in writing, within the

relevant Warranty Period (see clause 1.1(a) above); and(ii) follow the Warranty Claims Process in clause 1.10 above.

(e) You bear the expense of sending Warranted Items or Damaged Atlas CopcoEquipment to Atlas Copco for a Warranty Claim (see clause 1.1(b) above).

(f) Our goods come with guarantees that cannot be excluded under the AustralianConsumer Law. You are entitled to a replacement or refund for a major failure andfor compensation for any other reasonably foreseeable loss or damage. You are alsoentitled to have the goods repaired or replaced if the goods fail to be of acceptablequality and the failure does not amount to a major failure.

(g) The benefits given to you under the Warranty are in addition to other rights orremedies that you may have under State, Territory or Federal legislation.

(h) Goods presented for repair may be replaced by refurbished goods of the sametype rather than being repaired. Refurbished parts may be used to repair thegoods.



power technique products and services warranty - atlas copco

Documents