malaysia australia - toc | globally acknowledged
TRANSCRIPT
MALAYSIA AUSTRALIA
TOC’s dream is to inspire society to believe in the limitless career possibilities and success of automotive technicians and to enthuse automotive professionals to believe in their positive contribution to society.
To achieve that dream, we constantly improve our pedagogy, qualifications, facilities, staff and industry partnerships to empower our graduates with the right attitude, skills and knowledge to achieve global recognition and success.
Globally acknowledGed
automotive education
miSSion
ceo & FoundeR’S meSSaGe
viSion
ADELAINE FOO CEO & FOUNDER OF TOC
inSpiRinG SucceSS with inteGRity and innovation
01
WHO WE ARE
<< WHO WE ARE
02 03
• Cycle and Carriage Bintang (CCB), 2006
• Proton Edar, 2006
• Royal Malaysia Police (PDRM), 2007 - 2009
• Autoworld, 2009
• Castrol Mechanic Idol Competition, 2009
• Castrol, 2011 & 2012
TRUSTED FOR QUALITY BY THE INDUSTRY
TOC’s passion is what drives us to provide the best learning experience in automotive and motorsports education. We believe we play an integral part in shaping the fundamentals and the future of the automotive industry.
04
GLOBAL RECOGNITION
To further promote our brand quality, visits by local and international industry players have greatly assisted us in achieving global recognition.
IMPORTANT VISITS:• Tun Dr. Mahathir, 2005
• Lotus team, 2006
• Alex Yoong, 2007 & 2009
• Honda collaboration to meet F1 drivers Jenson Button, Rubens Barrichello and Alex Wurz, 2008
• Department of Skills Development, 2009
• Tengku Djan, 2010
• Minister of Youth and Sports, 2010
• Chairman of Automobile Association of Malaysia, 2010
• Leona Chin, 2012
05
<<
INTERNATIONAL VISITS:• French Embassy, 2008
• Federation of All Toyota Unions, Japan, 2010
• German-Malaysian Institute, Sri Lanka, 2010
• Yokohama Techno College, Japan, 2010
• CARPOS Korea Automobile Specialty Repair Association, Korea, 2011
• AJOU Motors College, Korea, 2012
• Teddy Pilette, Belgium, 2012
• Philippines Embassy, 2012
• University partners, UK
• University partners, USA
GLOBAL RECOGNITION
06 07
AWARDS
• 5-star training provider of Malaysian Skills Certificates
• Premier status by Accreditation Service of International Colleges (ASIC)
2012
• Winner in the “Educational Service” category of the Asia-Pacific Enterprise Leadership Awards (APELA)
• Top 30 finalist of Junior Chambers International (JCI) Ten Outstanding Young Malaysians
2012
• Winner, ASEAN Skills Competition – Automobile Technology
• Winner, Malaysian Skills Competition – Automobile Technology
• Best of 5, Malaysia Autosound Challenge (Pure Audio Competition)
• 1st runner up, Classic Car Category, Merdeka Millenium Endurance Race
• 2nd runner up, Classic Car Category, Merdeka Millenium Endurance Race
• Outstanding Achievers Awards sponsored by Total Oil
2008
• Outstanding Achievers Awards sponsored by Sime Darby Motor Division
2012
• Appointed as training provider to the Malaysian delegation for ASEAN Skills Competition – Automobile Technology category in KL, Malaysia, by the Ministry of Human Resources
• Recipient of Honda Civic Hybrid, donated by Honda Malaysia
• Appointed as the Franco-Malaysian Training Centre Citroen-TOC, a regional training centre for ASEAN and Hong Kong region, by Automobiles Citroen
• Outstanding Booth Award, Star Education Fair
2008
• 1st runner up, Malaysian Skills Competition – Automobile Technology
2007• Most Successful Women Award,
Jessica Magazine Malaysia• Top 10 finalist of Great Women of Our Time Award,
The Malaysian Women’s Weekly
2011
• 2nd runner-up, Bosch Powertool Race• Outstanding Achievers Awards sponsored
by Sime Darby Motor Division2011
• Appointed as training provider to the Malaysian delegation for World Skills Competition – Automobile Technology category in London, UK, by the Ministry of Human Resources
2011
• Outstanding Booth Award, Star Education Fair
2006
• 2nd runner up, Malaysian Skills Competition – Automobile Technology
• Bronze, Golden Hand Award for Malaysian Skills Competition (Automobile Technology category)
2006
• Outstanding Achievers Awards sponsored by Empire Motorsports
2010
• Top 3 winner of the Junior Chambers International (JCI) Creative Young Entrepreneur Award
• Top 40 under 40 winner by Prestige Magazine• Top 30 finalist of Junior Chambers International (JCI)
Ten Outstanding Young Malaysians
2010
• Best Booth Design Award, Facon Education Fair
2010
• Appointed as training provider for the Proton Technician Apprenticeship Programme, by Proton Edar20
05
• Outstanding Achievers Awards sponsored by A1 Team Malaysia
2009
• Winner, Malaysian Skills Competition – Automobile Technology (Instructor category)
• 2nd runner up, Malaysian Skills Competition – Automobile Technology (Instructor category)
2008
• Appointed as training provider for the Toyota Technician Apprenticeship Programme, by UMW Toyota20
04
• Appointed as training provider to the Malaysian delegation for World Skills Competition – Automobile Technology category in Calgary, Canada, by the Ministry of Human Resources
2009
COLLEGEAWARD
CEO & STAFFAWARD
STUDENTAWARD
Our success is our leadership in the local industry, the people we educate, and the career paths we open.
Prestigious awards won in several categories include:
ACCREDITATIONS:
• Ministry of Higher Education (MoHE)
• Malaysian Qualifications Agency (MQA)
• Ministry of Human Resources (MoHR)
• Department of Skills Development (JPK)
• Training and Employment Recognition Council, Queensland Government, Australia
• The Institute of the Motor Industry (IMI), UK
• City and Guilds International, UK
AWARDS
08
WHY TOC
CUTTING EDGE EXCELLENCE Our workspace boasts cutting edge facilities equipped with the most technologically advanced equipment and software in the industry. With campuses in Malaysia and Australia manned by highly qualified trainers, our courses will definitely ensure you successful career opportunities in the automotive industry.
09
<<
10
EQUIPMENT HIGHLIGHTSAUTOMOTIVE:Learn the traits of a car doctor with our state-of-the-art servicing equipment – the best the industry has to offer.
11
EQUIPMENT HIGHLIGHTS
common Rail SyStem SimulatoR
Understand the operation of a diesel engine that is equipped with a common rail direct injection system, which most modern diesel cars are equipped with. Students will be exposed to various engine conditions that pertain to common rail direct injection that simulate real life engine operating conditions, perform circuit connections on CRDI engines and also perform testing and diagnosis to give them a better understanding of the modern diesel engine.
honda JaZZ SimulatoR
This real life electronic fuel injection engine simulator of a Honda Jazz was designed to simulate the various operating conditions of an engine. Students will also get to test and troubleshoot problems in actual EFI engines.
5 GaS eXhauSt GaS analySeR
This analyser accurately adjusts the emission requirements of the required country regulations and students can analyse the combustion of the air and fuel mixture that leaves the combustion chamber of the engine through the tail pipe of the car and carry out the necessary adjustments, if required.
headlamp aliGnment
Accurately sets the car’s head lamp focus to avoid guessing while working on the alignment of the headlamps.
can-buS technoloGy
Students will learn the operating principles, functions and diagnosis capabilities of CAN-BUS systems that most modern cars are equipped with.
autotRonicS
Provides students with a better understanding of auto electricity and electronics, and where they will learn the foundation of auto electricity, as well as electromagnetism. Students will also use this laboratory for their advance subjects, such as CAN-BUS and oscilloscope interpretation.
caR body electRical wiRinG SyStem
This ‘real life’ car electrical equipment simulator was designed for the students to effectively understand the flow of current that enables the electrical components to work before applying their learning to an actual car.
boSch bRake Fluid teSteR
Accurately tests the capability of brake fluid, and is used when carrying out brake system diagnosis on the car.
common Rail inJectoR teSteR
Used to carry out engine diagnosis, this machine tests the operations of a diesel engine equipped with Common Rail Direct Injection technology, particularly the injectors.
motRonic eFi SimulatoR
This type of Electronic Fuel Injection was designed to effectively diagnose the operations and functions of an EFI engine made and designed in Europe. It simulates various engine operating conditions, which ensures the diagnosis is more accurate and effective.
MOTORSPORTS:Tune yourself for a life-changing career in motorsports by handling the latest motorsport equipment in the industry.
12
EQUIPMENT HIGHLIGHTS
13
EQUIPMENT HIGHLIGHTS
4 wheel dynamometeR with RetaRdeR
This 4 wheel dynamometer from Dynojet uses an eddy current to power the drums and is equipped with a retarder to simulate various road conditions. This is best used for tuning the car and diagnosing any symptoms that the car is experiencing.
SupeR Flowbench
Understand the volumetric flow of air that enters and exits the cylinder head ports, with an accurate analysis of the air intake and exhaust. It also identifies how much horsepower the components that are being tested will produce.
wiReleSS weiGhinG Scale
Accurately weighs the car before, during and after each race, and is used to distribute the weight of the car evenly.
SolidwoRkS SoFtwaRe
This software is used by motorsports students for auto body and components designing, following which they learn how to assemble and test the strength of materials used in their designs, using the software to analyse the aerodynamics of their designs.
cnc lathe machine
The lathe is controlled electronically via a computer menu style interface that is capable of fast cycle times, producing simple parts in 10-15 seconds, which makes it ideal for large production runs of small diameter parts. Students use this machine to ensure their competency in the industry after their studies at TOC.
motec SimulatoR
This simulator, designed by MoTeC, is connected to any PC or laptop, and gives a better understanding of the engine management system to ensure that any concern of damage to the car will be avoided whilst testing the Engine Management System components before.
endoScope
Accurately diagnoses the internal components of an engine without having the need to disassemble it. Students are exposed to various types of engine internal conditions using this equipment.
boSch wheel aliGnment machine
This Bosch machine, assisted by a four (4) post hoist to lift the vehicle, teaches students to understand the concepts of wheel alignment and the preparations that need to be done before setting up the machine. Regular maintenance by Bosch service representatives ensures that it is in kept in excellent working condition.
laSeR wheel aliGnment
Measures and adjusts the wheel alignment of the car quickly and accurately, especially during a race scenario, which eliminates the use of the traditional string wheel alignment.
cnc millinG machine
This electronically operated machine can perform a vast number of complex operations, such as slot and keyway cutting, planing, drilling, die sinking, rebating, routing, plus many more functions. Students use this machine to make them competent to current industry standards.
14
International Students from:• Bangladesh• Belgium• Brunei• Canada• China• Germany• Ghana• India • Indonesia• Iran• Iraq• Kenya• Korea
I really feel the “Wow” factor in TOC. I would name it as “Dream Workshop” for all automotive students!Mun Li Ping, Malaysia
TOC helped me achieve my dream!Lee Kyu Ho, South Korea
LIFE AT TOC
<<At TOC, we understand how hard it is to be away from home. We therefore provide services such as accommodation assistance, visa application services for foreign students, and campus transportation to ensure that you have an enjoyable experience at TOC.
STU
DE
NT
SE
RV
ICE
S
PIT STOPDesigned to let students have fun and take a break from classes to enjoy outdoor events such as track days and local festive celebrations.
<<• Lebanon• Libya• Maldives• Myanmar• Nepal• Pakistan• Saudi Arabia• Sri Lanka• Sudan• Tanzania• Thailand• UK• Vietnam
15
1716
Chew Yuan Jun Director,
911 Series (Porsche Specialist)
Rezza Rashid Sales Advisor,
Auto Bavaria (BMW)
Afiqah IbrahimPDI - Service Administration Assistant,
Porsche Centre Glenmarie (Sime Darby Auto Performance)
Justin Lee Project & Customer Relations Manager,
AutoDetailer Studio
Hanif ZakiCustomer Service Officer,
Auto Bavaria (BMW)
Wow, I really feel like I need to thank TOC for giving me the skills and knowledge that allowed me to work for Lamborghini right after graduation. After 4 years of valuable experience, I now have my own business.
It was a great experience studying in TOC and is still one that I cherish. The consistency of the instructors in supporting us whenever we needed help have prepared me well in facing everyday challenges at work.
TOC taught me how to survive in a ‘man’s world’ and to stand right next to them.
The reason TOC was founded made a lasting impression on me, as it recognises the need for trained and qualified staff in the automotive industry in Malaysia. I still believe that TOC was the first and still the best automotive college we have in Malaysia!
I wasn’t one for reading, but at TOC it was different as I found myself reading about the things I like and always wanted to know about. The lessons I learnt at TOC gave me a strong foundation while remaining relevant and practical.
AL
UM
NI
CAREER POSSIBILITIES
<<
Technician
Master Technician
Foreman
Workshop Supervisor
Workshop Manager
Workshop Owner
Service Advisor
Sales Advisor
designer
marshall
Scrutineer
team manager
team principal
team owner
Service Manager
Sales Manager
technical technician
Service
Sales
Air Conditioning
Wheels and Tyres
Transmission
Accessories
Detailing
parts
insurance
body and paint
training
Specialised Services
automotive motoRSpoRtS
enGineeRinG
manaGement
ALUMNI
1918
PETALING JAYA, SELANGOR Welcome to automotive heaven. Indulge yourself in a vast variety of aftermarket performance parts – from intercoolers to exhaust tips – specialty shops are located throughout PJ.
Enjoy a night out in Kuala Lumpur, Malaysia’s capital city, famous for its nightclubs and bars; topped with great local food anywhere you go, you can call Malaysia home!
Our state-of-the-art campus located in the bustling city of Petaling Jaya is central to automotive and motorsports education in Malaysia.
MALAYSIA
WHERE IN THE WORLD
21
GOLD COAST, QUEENSLAND
With over 70 kilometres of pristine coastline, 300 days of sunshine a year and an average temperature of 25 degrees, the beaches of the Gold Coast is the place to be! Home to many ‘Aussie’ petrol heads, V8 Supercars tear down the streets of Surfers Paradise and Main Beach once a year competing in the Gold Coast 600 race. Treat yourself as you learn; with several racetracks in Queensland, including Queensland and Ipswich Raceways, located just a stone’s throw away.
WHERE IN THE WORLD
Our modern, purpose built campus on the Gold Coast, Queensland, which is the main campus in Australia, offers unique training programs in Automotive Management, Technology and Motorsports.
AUSTRALIA
20
23
CO
UR
SE O
UT
LIN
ESkm Schedule (l01863)
SKM 1101 Carry Out Workshop Practices
SKM 1102 Engine Mechanical
SKM 1103 Vehicle Brake System
SKM 1201 Engine System & Engine Mechanical
SKM 1202 Drive Train System
SKM 1203 Introduction to Vehicle Electrical System
SKM 1 (P-119-1) Automotive Technician
SKM 1204 Vehicle Steering & Suspension System
SKM 1205 Workshop Practices
SKM 1301 Wheels, Tyres & Braking System
SKM 1302 Vehicle Air Conditioning System
SKM 1303 Vehicle Periodic Maintenance & Servicing
SIT 1230 Supervised Industrial Training
SIT 1240 Supervised Industrial Training
SKM 2401 Engine Repair
SKM 2402 Advanced Drive Train Systems
SKM 2403 Vehicle Electronic System
SKM 2502 Fuel System
SKM 2503 Advanced Vehicle Electronic System
SKM 2504 Advanced Brake System
SKM 2505 Emission System & Turbocharger
SKM 2601 Automatic Transmission & 4 Wheel Drive
SKM 2602 Supervisory Skills
SKM 2603 Advanced Vehicle Electrical System
SKM 2 (TP-300-2) Motor Vehicle Technician
SKM 3 (TP-300-3) Motor Vehicle Senior Technician
diploma Schedule
YE
AR
1Y
EA
R 1
YE
AR
2Y
EA
R 2
YE
AR
2.5
YE
AR
2.5
maJoR
DCS 1101 Introduction to Automotive Technology
DCS 1102 Engine Mechanical
DCS 1103 Chassis Systems
DCS 1201 Engine Systems
DCS 1202 Drive Train Systems
DCS 1203 Automotive Electrical Systems
DCS 1204 Steering Systems
DCS 1205 Mechanical & Workshop Practices
DCS 1301 Automotive Wheels & Tyres
DCS 1302 Automotive Air-Conditioning Systems
DCS 1303 Vehicle Maintenance & Servicing
maJoR
DCS 1101 Introduction to Automotive Technology
DCS 1102 Engine Mechanical
DCS 1103 Chassis Systems
DCS 1201 Engine Systems
DCS 1202 Drive Train Systems
DCS 1203 Automotive Electrical Systems
DCS 1204 Steering Systems
DCS 1205 Mechanical & Workshop Practices
DCS 1301 Automotive Wheels & Tyres
DCS 1302 Automotive Air-Conditioning Systems
DCS 1303 Vehicle Maintenance & Servicing
maJoR
DAT 2401 Petrol Engines
DAT 2402 Advanced Drive Train Systems
DAT 2403 Engine Computer Controlled Systems
DAT 2501 Diesel Engines
DAT 2502 Engine Electrical & Electronics Systems
DAT 2503 Body Electrical & Accessories
DAT 2504 Advanced Chassis Systems
DAT 2505 Emission Systems & Turbochargers
DAT 2601 Automatic Transmission & 4 Wheel Drive
DAT 2602 Customer Service & Workshop Management
DAT 2603 Advanced Automotive Electrical & Electronics
maJoR
DMS 2401 Motorsport Legislation, Health & Safety Procedures
DMS 2402 Race Car Anatomy & Configurations
DMS 2403 Manifold Tuning
DMS 2501 Motorsport Electrical & Electronics
DMS 2502 Engine Blueprinting
DMS 2503 Engine Management Systems
DMS 2504 Turbocharger Performance Tuning
DMS 2505 Motorsport Drive Train Systems
DMS 2601 Motorsport Chassis Systems
DMS 2602 Racetrack Analysis & Adjustments
DMS 2603 Vehicle Design & Aerodynamics
inteRnShip
ITP 3701 Internship (6 months)
inteRnShip
ITP 3701 Internship (6 months)
mpw
MPW 1113 Bahasa Kebangsaan
MPW 1133 Pengajian Malaysia (Malaysian Studies)
MPW 1143 Pengajian Islam (Islamic Studies) orMPW 1153 Pendidikan Moral (Moral Studies)
induStRy
SIT 1230 Supervised Industrial Training
mpw
MPW 1113 Bahasa Kebangsaan
MPW 1133 Pengajian Malaysia (Malaysian Studies)
MPW 1143 Pengajian Islam (Islamic Studies) orMPW 1153 Pendidikan Moral (Moral Studies)
induStRy
SIT 1230 Supervised Industrial Training
minoR
MSS 1252 Engineering Drawing & Mathematics
MSS 1253 Engineering Sciences
CEP 1251 Technical English
induStRy
SIT 1240 Supervised Industrial Training
minoR
DCS 1252 Engineering Drawing & Mathematics
MSS 1253 Engineering Sciences
CEP 1251 Technical English
induStRy
SIT 1240 Supervised Industrial Training
diploma in automotive technoloGy - dat (a5194)
diploma in motoRSpoRt technoloGy - dmS (a8959)
MALAYSIA (PHEI: B4P8090)
* a full time student is required to take 3 to 4 subjects per term.
22
COURSE OUTLINE
2524
COURSE OUTLINE
AU
R30
405
(16
MO
NT
HS)
ceRtiFicate iii in automotive mechanical technoloGy (automotive mechanical light vehicle)Student Induction & Team Leadership Camp
AURT271781A Implement and Monitor The Environment in The Automotive Mechanical IndustryAURC270103A Apply Safe Working PracticesAURT270278A Use and Maintain Workplace Tools and Equipment
AURT304666A Repair and Replace Emission Control Systems
AURTL306666A Repair Transmissions – Manual (Light Vehicle)AURT206670A Inspect and Service Transmissions (Manual)AURT207170A Inspect and Service Transmissions (Automatic)
AURT310166A Repair Hydraulic Braking SystemsAURT210170A Inspect and Service Braking SystemsAURT310104A Assemble and Fit Braking Systems/ComponentsAURT217865A Remove and Refit Wheel Hubs and Associated Brake Components
AURT215170A Inspect and Service Steering SystemsAURTL315166A Repair Steering Systems (Light Vehicle)AURTL316166A Repair Suspension Systems (Light Vehicle) AURT216170A Inspect and Service Suspension SystemsAURTL317108A Carry Out Wheel Alignment Operations (Light Vehicle)
AURT306170A Inspect, Service and / or Repair Clutch Assemblies & Associated Operating System ComponentsAURT212670A Service Final Drive AssembliesAURT213170A Service Final Drive (Driveline)AURT213165A Remove and Refit Driveline ComponentsAURTL312666A Repair Final Drive Assemblies (Light Vehicle)AURTL313166A Repair Final Drive – Driveline (Light Vehicle)
AURT217606A Balance Wheels and Tyres
AURE218676A Test, Service and Charge Batteries
AURTL301166A Repair Engine and Associated Engine Components (Light Vehicle)AURT201170A Inspect and Service EnginesAURT202166A Repair Cooling Systems
AURE321171A Service and Repair Electronic Spark Management SystemAURE320666B Repair Ignition Systems
AURE218708A Carry Out Repairs to Single Electrical Circuits
AURT203670B Service Diesel Fuel Injection SystemsAURT203170B Service Petrol Fuel SystemsAURT303166B Repair Petrol Fuel Systems
AURC252103A Apply Basic Automotive Troubleshooting ProcessesAURT365130A Inspect Vehicle Systems and Determine Preferred Repair ActionAURT366108A Carry Out Diagnostic Procedures
ceRtiFicate iii in automotive adminiStRationAURC252327A Identify, Clarify and Resolve
ProblemsBSBFLM312B Contribute to Team EffectivenessAURC207688A Work Effectively With Others
AURC270103A Apply Safe Working PracticesAURC272003A Apply Environmental Regulations
and Best Practice in a Workplace or Business
AURA254280A Operate in an Automotive Administration Environment
AURC251179A Write Routine Texts in the Workplace and Complete Automotive Documentation
BSBWOR202A Organise and Complete Daily Work Activities
BSBADM307B Organise SchedulesBSBADM311A Maintain Business ResourcesBSBINM202A Handle MailBSBINM301A Organise Workplace Information
AU
R30
105
(6 M
ON
TH
S)
diploma oF automotive manaGementAURC472082A Plan and Manage Compliance with
Environmental Regulations in Workplace or Business
BSBOHS407A Monitor a Safe Workplace
AURC561614A Contribute to Business ImprovementBSBMGT617A Develop and Implement a Business Plan
AURC361337A Maintain Quality SystemsBSBSMB401A Establish Legal & Risk Management
Requirements of Small BusinessBSBMGT403A Implement Continuous ImprovementBSBMGT516C Facilitate Continuous Improvement
BSBFLM312B Contribute to Team EffectivenessBSBWOR401A Establish Effective Workplace RelationshipsBSBWOR402A Promote Team EffectivenessBSBLED401A Develop Teams and IndividualsBSBINN502A Build And Sustain an Innovative Work
EnvironmentBSBWOR502B Ensure Team Effectiveness
AURC361101A Adapt Work Processes to New Technologies
AURC362807A Build Customer RelationsAURC363337A Maintain Business ImageBSBCUS501B Manage Quality Customer Service
BSBADM307B Organise SchedulesBSBADM311A Maintain Business ResourcesBSBADM409A Coordinate Business Resources
BSBPRO401A Develop Product KnowledgeBSBMKG507A Interpret Market Trends and Developments
BSBWOR404A Develop Work PrioritiesBSBWOR501B Manage Personal Work Priorities &
Professional DevelopmentBSBFIM501A Manage Budgets & Financial PlansBSBMGT515A Manage Operational Plan
BSBMGT502B Manage People PerformanceBSBHRM402A Recruit, Select and Induct Staff
AU
R50
105
(1 Y
EA
R)
ceRtiFicate iv in automotive manaGement
AU
R40
105
(9 M
ON
TH
S)
BSBINN301A Promote Innovation in a Team Environment
BSBWOR401A Establish Effective Workplace Relationships
BSBLED401A Develop Teams & IndividualsBSBWOR402A Promote Team EffectivenessBSBSMB407A Manage a Small Team
BSBITS401A Maintain Business TechnologyBSBADM409A Coordinate Business Resources
BSBOHS407A Monitor a Safe WorkplaceAURC472082A Plan and Manage Compliance
with Environmental Regulations in a Workplace or Business
A
UR
4020
8 (1
YE
AR
)
ceRtiFicate iv in automotive technoloGy (mechanical) AURE321271A Service and Repair Electronic Drive Management SystemsAURT406645A Overhaul Transmissions (Manual)
AURT304666A Repair and Replace Emission Control SystemsAURT305671A Inspect and Repair Engine Forced Induction Systems
AURE320871A Service and Repair Electronically Controlled Steering SystemsAURE320971A Service and Repair Electronically Controlled Suspension Systems
AURT471782A Plan and Manage Compliance with Environmental Regulations in the Mechanical Repair IndustryAURT466208A Carry Out Diagnosis of Complex System Faults
AURT575293A Analyse and Evaluate Electrical and Electronic Faults in Engine Management Systems
AURT412645A Overhaul Final Drive Assemblies
BSBRKG301B Control RecordsBSBFLM309C Support Continuous Improvement
Systems & ProcessesBSBSMB401A Establish Legal & Risk
Management Requirements of Small Business
BSBMGT403A Implement Continuous Improvement
BSBPRO401A Develop Product KnowledgeBSBCUS401A Coordinate Implementation of
Customer Service StrategiesBSBMKG507A Interpret Market Trends and
Developments
BSBHRM402A Recruit, Select & Induct StaffBSBSMB404A Undertake Small Business
PlanningBSBWOR404A Develop Work PrioritiesBSBMGT502B Manage People Performance
AURC261314A Contribute to Quality Work Outcomes
AURC361337A Maintain Quality Systems
AURA254180A Operate Information Technology SystemsAURC361101A Adapt Work Processes to New
TechnologiesBSBWOR204A Use Business TechnologyBSBITU306A Design and Produce Business
DocumentsBSBITU202A Create and Use Spreadsheets
AURC362807A Build Customer RelationsAURC363337A Maintain Business ImageBSBSMB301A Investigate Micro Business
Opportunities BSBCUS201A Deliver a Service to Customers
AUSTRALIA (TOID: 32407)
CO
UR
SE O
UT
LIN
E
AUR50105 - Diploma of Automotive Management ( incorporating Certificate III in Automotive Administration & Certificate IV in Automotive Management ) can be completed within 2 years. Subjects * will only be taken once.
*
**
*
**
*
*
*
*
****
*
*
*
***
*
26
PROGRAMMEPATHWAYS<<
• 0 Credit SPM / O Levels • 16 Year Old Malaysian• 18 Year Old Non-Malaysian
optional awaRdS
• IMI Certificate
• RPL Certificate 3
• TOCA Diploma of Automotive management + english (ieltS 4.5) (1.5 years)
• TOCA Diploma of Automotive management (ieltS 5.5) (1 year)
• TOCA Diploma of Automotive management + english (ieltS 4.5) (1.5 years)
• TOCA Diploma of Automotive management (ieltS 5.5) (1 year)
TOCM SKM 1 + 2 (1 yeaR)
optional awaRdS
• IMI Diploma
• RPL Certificate 3 + 4
tocm SKM 1 + 2 + 3 (2 YEAR)
• Weber State University - Utah, USA a.a.S degree automotive Service technology - 1 year B. Sc in Advance Vehicle Systems - 2 years
• UNITEC - Auckland, New Zealand b. applied technology (automotive engineering) - 1.5 years
• Staffordshire University - Stoke-on-Trent, United Kingdom B. Sc (Hons) Motorsport Technology - 2 years
• University of Hertfordshire - London, United Kingdom B. Sc (Hons) Motorsports Technology - 2 years B. Sc (Hons) Automotive Technology and Management - 2 years b. eng (hons) automotive engineering - 3 years b. eng (hons) automotive engineering with motorsports - 3 years
• University of Wolverhampton - Wolverhampton, United Kingdom B. Eng (Hons) Automotive Systems Engineering - 2 years
• Coventry University - Coventry, United Kingdom b. eng in automotive engineering - 3 years b. eng in motorsport engineering - 3 years
• UCSI University - Kuala Lumpur, Malaysia b. eng (hons.) in mechanical engineering - 4 years (with 1 year exemption) b. eng (hons.) in mechatronic enginerring - 4 years (with 1 year exemption)
• University of Ulsan - Nam Gu, Ulsan B. Eng Mechanical & Automotive Engineering - 2 years (+1 year Korean Language)
• Edith Cowan University - Perth, Australia b. technology in motorsports - 3 years b. technology motorsports & mechanical engineering - 5 years (double degree) b. technology motorsports & mechatronics engineering - 5 years (double degree)
degree pathways
• 3 Credit SPM / O Levels + pass math
optional awaRdS
• SKM 1 + 2 + 3
• IMI Diploma
• RPL Certificate 3 + 4
• TOCA Diploma of Automotive Management (1 or 2 years)
diploma in automotive technology (2.5 YEARS) tocm SKM 1 + 2 + 3 (2 YEARS)
• TOCA Diploma of Automotive Management + english (ieltS 4.5) (1.5 years)
• TOCA Diploma of Automotive Management (ieltS 5.5) (1 year)
• Weber State University - Utah, USA a.a.S degree automotive Service technology - 1 year B. Sc in Advance Vehicle Systems - 2 years
• Staffordshire University - Stoke-on-Trent, United Kingdom b. Sc (hons) motorsports - 1 year b. Sc (hons) motorsport technology - 1.5 years B. Sc (Hons) Automotive Technology - 2 years
• University of Wolverhampton - Wolverhampton, United Kingdom B. Eng (Hons) Automotive Systems Engineering - 2 years
• UCSI University - Kuala Lumpur, Malaysia b. eng (hons.) in mechanical engineering - 4 years (with 1 year exemption) b. eng (hons.) in mechatronic enginerring - 4 years (with 1 year exemption)
• Edith Cowan University - Perth, Australia b. technology in motorsports - 3 years b. technology motorsports & mechanical engineering - 5 years (double degree) b. technology motorsports & mechatronics engineering - 5 years (double degree)
degree pathways
• 3 Credit SPM / O Levels + Pass Math & Science• 1 Credit SPM
optional awaRdS
• SKM 1 + 2
• IMI Certificate
• RPL Certificate 3
optional awaRdS
• IMI Diploma
• RPL Certificate 3 + 4
diploma in motorsport technology (2.5 YEARS)
PROGRAMME PATHWAYS
27
* Rpl = Recognition of prior learning
LOCATION MAPS
COMMUNITY SERVICE
LOCATION MAPS
TOC AUSTRALIA CAMPUS
trade & occupational college of australia pty ltd (ACN:135783827)
151 Currumburra Road Ashmore QLD 4214, Australia
T: +61 7 5564 7666 F: +61 7 5564 8666 E: [email protected]
We are proud to be recognised for the many ways we have embraced community service as a part of our company culture.
GPS coordinates: -27.98279, 153.38274
PCYC
Russell AutomaticsArchers
Smash
SouthpoRt-neRanG RoadSouthpoRt-neRanG Road
Smith StReet motoRway
cotlew StReet eaSt
TOC MALAYSIA CAMPUS
the otomotif college Sdn. bhd. (608073-w)
10, Jalan 19/1, Seksyen 1946300 Petaling Jaya, Selangor, Malaysia
T: +603 7960 8833 F: +603 7960 4355 E: [email protected]
GPS coordinates: 3.11311, 101.62939
do
min
ion
S R
oa
d
cu
RR
um
bu
RR
a R
oa
d
pac
iFic
mo
toRw
ay
aSh
mo
Re
Ro
ad
olS
en a
ven
ue
Go Bowling
Ashmore Shopping Plaza
Royal Pines RACV Resort
Ashmore City Plaza
28
AUSTRALIA
SekolahKebangsaanSri Petaling
SinChewJit Poh
Lisa De Inn
Menara Merais BMW
Toyota
Jaya 33
MasjidBulat
PeroduaShowroom
PJ Hilton
BAT
Armada Hotel
MenaraAxis
Asia JayaLRT Station
Jalan SemanGat
JALAN 19/1
to klanG to kuala lumpuR
Jala
n u
taR
a
WWW.TOC.NET.AU
WWW.TOC.EDU.MY
/TOCAustralia
/TOC.edu
/TOCAustralia
/TOC.edu