decisionspace® well engineering release notes
TRANSCRIPT
5000.1.10.1 May 2013
Draft
DecisionSpace® Well Engineering
5000.1.10.1Software Release Notes
Contents
What Is In This Release? ........................................................................................ 2
System Requirements ............................................................................................ 7
Third-Party Software ............................................................................................... 9
Installation ............................................................................................................... 11
Licensing ................................................................................................................. 21
Functionality to Expect in This Release ............................................................... 22
Fixed Issues ............................................................................................................ 35
Known Issues .......................................................................................................... 37
Known Compatibility Issues With WELLPLAN™ Software ................................. 39
International Trade Compliance ............................................................................ 40
Contacting Landmark for Support ........................................................................ 42
5000.1.10.1 Page 2 of 46 May 2013
What Is In This Release? May 2013
Draft
What Is In This Release?
DecisionSpace® Well Engineering software is the latest significant step in the over twenty year evolution of the WELLPLAN™ software. Building upon this industry leading suite, DecisionSpace Well Engineering extends and simplifies the science through advancements in ease of use and data visualization. DecisionSpace® Well Engineering is integrated with the other EDT™ applications enabling you to install it on the same computer, and share data with other EDT applications. You can be confident that DecisionSpace® Well Engineering software uses the same theoretical science and industry-leading methodology you rely on with the WELLPLAN™ software.
Significantly Improved Usability
For novice and expert users, the completely redesigned user interface provides a simple approach to input data as well as powerful visualization capabilities to quickly interpret results. The software interface is divided into four major sections. Use the tabs on the left to input well related data, and the tabs on the right to input analysis parameters or view a schematic. Select desired analysis outputs using the ribbons at the top, and view output results in the middle section. This interface design provides you easy navigation through the software with minimal clicks. Due to the improved usability, existing WELLPLAN™ users will require minimal training, while new users can quickly learn to use the DecisionSpace® Well Engineering software.
5000.1.10.1 Page 3 of 46 May 2013
Draft
Go To “What’s In This Release?”
What Is In This Release? DecisionSpace® Well Engineering Software Release Notes
Expanded Sensitivity Analysis
DecisionSpace® Well Engineering provides a powerful method of performing sensitivity analysis for many different variables. Rather than perform multiple manual iterations, you can define a range of values for the numeric variables you want to use in the sensitivity analysis. The analysis will be performed using the defined ranges on all outputs in the Output Area (center section of the software interface) that use the range data. Detailed graphical representations allow you to quickly review the sensitivity results.
5000.1.10.1 Page 4 of 46 May 2013
Draft
Go To “What’s In This Release?”
What Is In This Release? DecisionSpace® Well Engineering Software Release Notes
Output Drive Inputs
Input only the data needed for the analysis you need. DecisionSpace® Well Engineering provides clear step-by-step guidance on what data is required and leads you through the data input panels in just a few clicks. Dynamic navigation and notifications guide you through entering the required data, and performing the next analysis step. Outputs are calculated and displayed when all the required data is input. This process enables engineers to utilize the software quickly and easily while supporting more accurate results.
“Output driving input” methodology identifies the required data and provides hypertext links to the appropriate data input panel. Simply click the hypertext links, input the required data, and the software does the rest. The interactive wellbore schematic provides visual feedback throughout the analysis. This simplified process allows you to make better decisions by quickly and accurately performing the analysis you need.
5000.1.10.1 Page 5 of 46 May 2013
Draft
Go To “What’s In This Release?”
What Is In This Release? DecisionSpace® Well Engineering Software Release Notes
Interactive Wellbore Representations
Results are displayed graphically as part of interactive wellbore representations making interpretation of results easy to visualize and understand.
5000.1.10.1 Page 6 of 46 May 2013
Draft
Go To “What’s In This Release?”
What Is In This Release? DecisionSpace® Well Engineering Software Release Notes
WYSIWYG Reports
The “output driving inputs” design used in the DecisionSpace® Well Engineering software carries over into the reports. In addition to a well schematic and table of contents, the report will contain only the information associated with the outputs you have selected. Information associated with the output includes general well data, and analysis parameters. The reports can be output in a variety of commonly used formats such as pdf, doc, xls, and more.
Service Oriented Architecture
DecisionSpace® Well Engineering calculations are web services based. This provides the capability to replace the Landmark® provided calculation engines with third party, or customer specific calculation engines.
New Centralization Module
This module is new for the 5000.1.10.1 release of DecisionSpace Well Engineering software. It is similar to the Centralizer Placement Mode in the WELLPLAN™ Cementing Module (OptiCem).
Use this analysis to predict the Casing or Liner String centralization for intervals, using the Required Standoff or the Fixed Spacing methodologies.This analysis can be used to determine the centralization intervals for Casings and/or Liner Strings using the selected methodology.
The intervals can be selected using either traditional inputs, or graphically using the Wellbore Curvature Schematic. Once the centralizer pattern is defined, the user can note the effect on the centralization, comparing both methodologies. The selected standoff can then be transferred with a single click to the appropriate input fields (on the String Editor), to be used for all calculations. A “Quick Look” at the Torque and Drag calculation will be shown.
5000.1.10.1 Page 7 of 46 May 2013
Draft
Go To “What’s In This Release?”
System Requirements DecisionSpace® Well Engineering Software Release Notes
System Requirements
DecisionSpace® Well Engineering software will run on Engineer’s Desktop™ versions 5000.1.10.0 or later 5000.1.10.x releases.
Refer to Engineer’s Desktop™ Software Version 5000.1.10 Release Notes for detailed information about system requirements.
Tested Operating System(s)
• Windows 7, SP1, 64-bit• Citrix XenApp6
Windows
Desktop and laptop basic requirements are:
• 2 GHz or higher processor • 4GB RAM or higher • VGA Color Monitor • Graphics Card: minimum 1024x768 resolution. DirectX 9.0 compatible or
better, with DirectDraw Acceleration Enabled • 106-key Windows-ready integrated keyboard • MS-Compatible mouse or pointing device • TCP/IP based network connection 100 Mbps • 1 GB disk space
Software
• EDT 5000.1.10.0 or higher must be installed• .NET framework v. 4.0 (downloaded and installed with DS Well Engineering
installer)
Related Products
• EDT 5000.1.10.0 or higher must be installed• Access to an EDM database instance is required
5000.1.10.1 Page 8 of 46 May 2013
Draft
Go To “What’s In This Release?”
System Requirements DecisionSpace® Well Engineering Software Release Notes
Citrix
DS Well Engineering has been tested with the Citrix thin-client environment. The following Citrix platform was tested.
Primary test environment, running Citrix XenApp 6 against Oracle 11.2.0.2:
Server 1 (Database server, SAM server)
Operating System: •Windows Server 2008 R2 SP1 Enterprise Edition, 64 Bit
Services: • Oracle 11g – 64 Bit Server (11.2.0.2 with patch 7 – 12429531)
• EDM database
• (SAM) Simultaneous Access Monitor (Note that the SAM server should not be on the same server with Citrix and the published applications)
Server 2 (Citrix and Applications)
Operating System: • Windows Server 2008 R2 SP1 Enterprise Edition, 64 Bit
Services: • Citrix XenApp 6.0 with recommended Citrix Hotfixes and Windows Hotfixes as described in: Recommended Hotfixes for XenApp 6.0 and Later on Windows 2008
Server R2 document at http://support.citrix.com/article/CTX129229
• EDT 5000.1.10.0• Oracle 11g – 32 Bit Client (11.2.0.2 with patch 7 – 12429530)
Citrix Client:• Version 11.00
5000.1.10.1 Page 9 of 46 May 2013
Draft
Go To “What’s In This Release?”
Third-Party Software DecisionSpace® Well Engineering Software Release Notes
Third-Party Software
Landmark uses various third-party applications in the development of its software.
Landmark acknowledges that certain third party code has been bundled with, or embedded in, Landmark’s software. The licensors of this third party code, and the terms and conditions of their respective licenses, may be found at the following location:
[Installdir]\Documentation\Third_Party.pdf
The following table describes the third party applications that are installed by the Engineer’s Desktop™ Software Version 5000.1.10.0 Release, or the DecisionSpace® Well Engineering 5000.1.10.1 Release.
Installed Product/Package Version for all supportedOperating Systems
Apache/XML Xerces 1.4.x
AvalonDock 1.3.3571.0
Blue Marble Geographic Calculator 6.2
Commons BeanUtils 1.4.1
Commons Collections 2.0
Commons Logging 1.0.2
ComponentOne LLC Chart™ 7.0
Crystal Project, © 2008 The Yellow Icon. All rights reserved. N/A
Crystal Reports™ (note that one Crystal Reports™ Developer license per site is required if you want to customize reports)
11.5 SP3
DEX 2003.14.3.70
DynamicDataDisplay 0.3
Geobase® (Digital Elevation Data, and Satellite Imagery) N/A
Hewlett-Packard Development Company, L.P., Compaq Visual Fortran 6.1a
iText 2.1.6
Macrovision™ Corporation FLEXnet Publisher™ 11.4
Macrovision™ InstallShield Admin Studio™ 6.0
Microsoft® Data Access Components (MDAC) 2.8 SP1
Microsoft® J# FrameWork 1.1
5000.1.10.1 Page 10 of 46 May 2013
Draft
Go To “What’s In This Release?”
Third-Party Software DecisionSpace® Well Engineering Software Release Notes
Microsoft® Prism 4.1
Microsoft® Ribbon Control 4.0.0.11019
Microsoft® SQL Server 2005 Express Edition (replaces MSDE) SP2
Microsoft® .NET Framework 2.0 2.0
Microsoft® WPF Toolkit 3.5.40128.1
Microsoft® Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update (filename: vcredist_x86.exe)
2005 SP1 (v. 8.0)
NHibernate (which includes the following:)• ANTLR3 3.1.0.39271• Iesi.Collections• LinFu.DynamicProxy 1.0.4.18998• log4net 1.2.10.0
2.1.2.4000
Rogue Wave 6.0.4
Rogue Wave™ Software, Inc., Stingray Studio – Objective Grid PRO 8
Rogue Wave™ Software, Inc., Stingray Studio – Objective Grid Standard 8
Rogue Wave™ Software, Inc., Stingray Studio – Objective Toolkit Standard 8
SCGrid.com, SCGrid Active X grid Control 4.5.0.3
Silicon Graphics®, Inc. OpenGL® 1.2
Sun Microsystems, Inc., JOGL (Java Bindings for OpenGL). Copyright © 2003-2007 Sun Microsystems, Inc. All rights reserved.
1.1.1a
TCL Library (Tclib) 8.2.3
Transitionals 1.2
Installed Product/Package Version for all supportedOperating Systems
5000.1.10.1 Page 11 of 46 May 2013
Draft
Go To “What’s In This Release?”
Installation DecisionSpace® Well Engineering Software Release Notes
Installation
Note that 32-bit operating systems are no longer supported.
Contents of the DecisionSpace® Well Engineering Software Download
DecisionSpace® Well Engineering software download contains:
• DSWellEng_5000.1.10.1.zip file containing the DecisionSpace® Well Engineering 5000.1.10.1 Release. The update will add new files and update existing Engineer’s Desktop™ Software Version 5000.1.10.0 (or later 5000.1.10.x) Release files.
• Release Notes for DecisionSpace® Well Engineering software. This document is installed in the root directory.
Installation Instructions
Step 1. Install EDT 5000.1.0
Refer to Engineer’s Data Model (EDM) Installation Guide for information about installing the Engineer’s Desktop. As directed in the installation guide, you must install LAM, Third Party products, EDM, and the Drilling and Completions software.
Step 2. Install EDT 5000.1.10.0, or later EDT 5000.1.10.x Release
Refer to Engineer’s Desktop™ Software Version 5000.1.10.0 (or later 5000.1.10.x) Release Notes for information about installing the Engineer’s Desktop.
Step 3. Install .NET Framework v4
.NET Framework v4 can be downloaded from the Microsoft® website.
Engineer’s Desktop™ Software Version 5000.1.10.0 (or later 5000.1.10.x) Release must be installed before installing DecisionSpace® Well Engineering software.
This release of DecisionSpace® Well Engineering software is an upgrade to the Engineer’s Desktop™ Software Version 5000.1.10.0 (or later 5000.1.10.x) Release. You must have EDT 5000.1.10.x installed on your machine before installing the DecisionSpace® Well Engineering software.
5000.1.10.1 Page 12 of 46 May 2013
Draft
Go To “What’s In This Release?”
Installation DecisionSpace® Well Engineering Software Release Notes
Step 4. Install DecisionSpace® Well Engineering 5000.1.10.1 Release Software
a. Unzip the DSWellEng_5000.1.10.1.zip file to a temporary folder. Two files are included in the zip file: Setup.msi, and setup.exe.
b. Run setup.exe.
c. Click Run.
5000.1.10.1 Page 13 of 46 May 2013
Draft
Go To “What’s In This Release?”
Installation DecisionSpace® Well Engineering Software Release Notes
d. Click Next.
5000.1.10.1 Page 14 of 46 May 2013
Draft
Go To “What’s In This Release?”
Installation DecisionSpace® Well Engineering Software Release Notes
e. Navigate to the folder where you want to install the software, and indicate who should have access to the software once it is installed. Click Next.
5000.1.10.1 Page 15 of 46 May 2013
Draft
Go To “What’s In This Release?”
Installation DecisionSpace® Well Engineering Software Release Notes
f. Click Next.
g. Click Yes.
5000.1.10.1 Page 16 of 46 May 2013
Draft
Go To “What’s In This Release?”
Installation DecisionSpace® Well Engineering Software Release Notes
h. A progress bar displays. Click Close when installation is complete.
5000.1.10.1 Page 17 of 46 May 2013
Draft
Go To “What’s In This Release?”
Installation DecisionSpace® Well Engineering Software Release Notes
Step 5. Update the EDM™ Database
Go here to obtain the appropriate database update script (for either Oracle or SQL Server):
a. Run Start > All Programs > Landmark Engineer’s Desktop 5000.1 > Tools > DS Well Engineering Updates.
• To update an Oracle database, select Apply DS Well Eng ORA Update.
• To update an SQL database, select Apply DS Well Eng SQL Update.
Note: The images in the following steps pertain to the SQL update. However, the Oracle update is performed using the same steps.
5000.1.10.1 Page 18 of 46 May 2013
Draft
Go To “What’s In This Release?”
Installation DecisionSpace® Well Engineering Software Release Notes
b. Click Yes.
c. Click Unzip.
d. Click OK.
5000.1.10.1 Page 19 of 46 May 2013
Draft
Go To “What’s In This Release?”
Installation DecisionSpace® Well Engineering Software Release Notes
e. Click Run Automated.
f. Click OK.
g. Enter credentials, and select database you want to update. Click OK.
h. On the next screen that displays, click Yes to update the database.
5000.1.10.1 Page 20 of 46 May 2013
Draft
Go To “What’s In This Release?”
Installation DecisionSpace® Well Engineering Software Release Notes
i. Click OK.
Step 6. Run the DecisionSpace® Well Engineering 5000.1.10.1 Release software.
Use Start > All Programs > Landmark Engineer’s Desktop 5000.1 > DS Well Engineering to run the DecisionSpace® Well Engineering software.
5000.1.10.1 Page 21 of 46 May 2013
Draft
Go To “What’s In This Release?”
Licensing DecisionSpace® Well Engineering Software Release Notes
Licensing
Landmark's Application Manager (LAM) is the license system used to control access to Landmark applications. LAM is based on Macrovision's FLEXnet Publisher. LAM version 5000 is required for release 5000.1.0 and higher. You do not need to re-license for this release; your 5000.1.0 licenses will work. Refer to the EDT™ Software Version 5000.1.0 Summary Level Release Notes for licensing details.
The DecisionSpace® Well Engineering software requires the following valid licenses to run:
• EDM
• Drilling Mechanic Basic (Torque and Drag) License and/or Drilling Fluids Basic (Hydraulics) license
• The Centralization functionality will only be available if the user has the TORQUEDRAG and CENTRALIZERPLACEMENT licenses or the CEMENT license.
5000.1.10.1 Page 22 of 46 May 2013
Draft
Go To “What’s In This Release?”
Functionality to Expect in This Release DecisionSpace® Well Engineering Software Release Notes
Functionality to Expect in This Release
The DecisionSpace® Well Engineering software release contains most of the WELLPLAN™ Torque Drag, Hydraulics, and general functionality. This section indicates the WELLPLAN functionality implemented in the DecisionSpace® Well Engineering 5000.1.10.1 Release.
Torque Drag Analysis
1In the DecisionSpace® Well Engineering 5000.1.10.1 Software Release, the WELLPLAN™ Top Down Analysis and Normal Analysis modes are blended. Use the User Defined Operation to perform a top down analysis using the DecisionSpace® Well Engineering 5000.1.10.0 Software Release.
2An alternative approach to friction calibration is implemented in the DecisionSpace® Well Engineering 5000.1.10.1 Software Release using the Friction Calibration plot.
3For off-shore/subsea wells, if there is no riser, the application is automatically in riser-less mode. Refer to the help system for more information
Note: Functionalities in the tables below that are shown in red bold type were addressed or added for this 5000.1.10.1 release.
Torque Drag Analysis Modes
WELLPLAN™ Analysis Mode In Release?
Normal Analysis Yes
Top Down Analysis Yes1
Drag Chart Analysis Yes
Calibration Friction Analysis Yes2
Riserless/InnerString Analysis Yes3
5000.1.10.1 Page 23 of 46 May 2013
Draft
Go To “What’s In This Release?”
Functionality to Expect in This Release DecisionSpace® Well Engineering Software Release Notes
1With the implementation of the Friction Calibration plot in the Deci-sionSpace® Well Engineering 5000.1.10.1 Software Release, average operational friction factors are no longer necessary.
Torque Drag Functionality
Functionality In Release?
Sheave Friction Yes
Fluid Columns Yes
Stiff String Yes
Flotation (Casing/Liner) Yes
Standoff Devices/Centralizers Yes
Sensitivity Plots Yes
Torque Drag Analysis with Flowrate Yes
Bending Stress Magnification Yes
Viscous Drag Yes
Unique Friction Factors for Separate Operations Yes
Average Operational Friction Factors N/A1
Actual Loads Yes
Additional Surface or Annular Pressure Yes
Point of Interest for Run Plots Yes
Buckling Limit Factor Yes
Contact Normalization Length Yes
Real Time Data Import No
Reports Yes
5000.1.10.1 Page 24 of 46 May 2013
Draft
Go To “What’s In This Release?”
Functionality to Expect in This Release DecisionSpace® Well Engineering Software Release Notes
Torque Drag Plots and Tables
Functionality In Release?
Effective Tension Yes
True Tension Yes
Torque Graph Yes
Sensitivity Plot Friction Factors Yes1
Side Force Graph Yes
Fatigue Graph Yes
Stress Graph: Tripping In Yes
Stress Graph: Rotating On Bottom Yes
Stress Graph: Tripping Out Yes
Stress Graph: Rotating Off Bottom Yes
Stress Graph: Slide Drilling Yes
Position Graph: Tripping In Yes2
Position Graph: Rotating On Bottom Yes2
Position Graph: Tripping Out Yes2
Position Graph: Rotating Off Bottom Yes2
Position Graph: Slide Drilling Yes2
Position Graph: Backreaming Yes2
Summary Loads Yes
Load Data: Tripping In Yes
Load Data: Rotating On Bottom Yes
Load Data: Tripping Out Yes
Load Data: Rotating Off Bottom Yes
Load Data: Slide Drilling Yes
Load Data: Backreaming Yes
Stress Data: Tripping In Yes
Stress Data: Rotating On Bottom Yes
Stress Data: Tripping Out Yes
Stress Data: Rotating Off Bottom Yes
Stress Data: Slide Drilling Yes
5000.1.10.1 Page 25 of 46 May 2013
Draft
Go To “What’s In This Release?”
Functionality to Expect in This Release DecisionSpace® Well Engineering Software Release Notes
1The DecisionSpace® Well Engineering software provides a powerful method of performing sensitivity analysis. Sensitivity analysis is not limited to friction factor calibration, and can be applied to many parameters. Refer to the online help for more information.
2in the DecisionSpace® Well Engineering software release, the information is displayed in the Workstring Position plot. This plot displays the position of the workstring in the wellbore for both soft and stiff string analysis. Fatigue, Von Mises stress, or Side Force acting on the workstring can be displayed as well. Refer to the online help for more information.
3DecisionSpace® Well Engineering software reports contain information related to selected outputs.
4In the DecisionSpace® Well Engineering 5000.1.10.1 Software Release, all friction calibration is performed using the Friction Calibration plot.
Stress Data: Backreaming Yes
Detail Report Yes3
Summary Report Yes3
Tension Point/Hook Load Chart Yes
Torque Point/Surface Chart Yes
Minimum WOB Chart Yes
Sensitivity Plot Tension/Hook Load Chart Yes1
Friction Calibration/Hook Load Chart Yes
Manual Friction Calibration/Hook Load Chart Yes4
Top Down Tension Graph Yes
Top Down Torque Graph Yes
Top Down Side Force Graph Yes
Top Down Fatigue Graph Yes
Top Down Stress Graph Yes
Top Down Position Graph Yes
Top Down Load Data Yes
Top Down Stress Data Yes
Top Down Analysis Detail Report Yes
Torque Drag Plots and Tables
5000.1.10.1 Page 26 of 46 May 2013
Draft
Go To “What’s In This Release?”
Functionality to Expect in This Release DecisionSpace® Well Engineering Software Release Notes
Centralizer Module
This module is new for the 5000.1.10.1 release of DecisionSpace Well Engineering software. It is similar to the Centralizer Placement Mode in the WELLPLAN™ Cementing Module (OptiCem).
Use this analysis to predict the Casing or Liner String centralization for intervals, using the Required Standoff or the Fixed Spacing methodologies.This analysis can be used to determine the centralization intervals for Casings and/or Liner Strings using the selected methodology.
The intervals can be selected using either traditional inputs, or graphically using the Wellbore Curvature Schematic. Once the centralizer pattern is defined, the user can note the effect on the centralization, comparing both methodologies. The selected Standoff can then be transferred with a single click to the appropriate input fields (on the String Editor), to be used for all calculations. A “Quick Look” at the Torque and Drag calculation will be shown.
5000.1.10.1 Page 27 of 46 May 2013
Draft
Go To “What’s In This Release?”
Functionality to Expect in This Release DecisionSpace® Well Engineering Software Release Notes
Hydraulics Analysis
1Separate Bed Height vs MD, Cuttings Volume vs Depth, and Minimum Flowrate vs MD plots are available in DecisionSpace® Well Engineering software.
2A significant amount of the WELLPLAN™ functionality has been implemented in the DecisionSpace® Well Engineering software.
Hydraulics Analysis Modes
WELLPLAN™ Analysis Mode In Release?
Hole Cleaning Operational Analysis Yes1
Hole Cleaning Parametric Analysis No
Pressure: Pump Rate Range Analysis Yes2
Pressure: Pump Rate Fixed Analysis Yes2
Swab/Surge (Steady-State) Analysis Yes
Optimization Planning No
5000.1.10.1 Page 28 of 46 May 2013
Draft
Go To “What’s In This Release?”
Functionality to Expect in This Release DecisionSpace® Well Engineering Software Release Notes
1The local bit nozzle functionality is no longer required because the DecisionSpace® Well Engineering software interface provides easy access to all input data.
2The DecisionSpace® Well Engineering software Hydraulics Summary displays the pressure loss in the string, bit, and annulus but does not display the pressure loss as loss per component.
3DecisionSpace® Well Engineering software reports will contain information related to selected outputs.
Hydraulics Analysis Functionality
Functionality In Release?
Pipe Roughness Yes
Annular Roughness Yes
Mud Temperature Effects Yes
Returns to Sea Floor Yes
Local Bit Nozzle Analysis Yes1
Include Back Pressure Yes
Annular Velocity Plot Yes
Gel Strength Yes
Pressure Loss Pie Chart Yes2
Power Loss Pie Chart Yes
Reports Yes3
5000.1.10.1 Page 29 of 46 May 2013
Draft
Go To “What’s In This Release?”
Functionality to Expect in This Release DecisionSpace® Well Engineering Software Release Notes
Hydraulics Analysis Plots, Tables, and Reports
Functionality In Release?
Operational Plot Yes
Minimum Flow Rate vs ROP Yes
Hole Cleaning Operational Report Yes
Total Volume % Plot Yes
Suspended Volume % Plot Yes
Minimum Flowrate Plot Yes
Bed Height Plot Yes
Pressure Loss Plot Yes
Annular Velocity Plot Yes
Annular Pump Rate Plot Yes
Annulus Information Table Yes
Pressure Loss Report Yes3
Circulating Pressure vs Depth Plot Yes
ECD vs Depth Plot Yes
Circulating Pressure/ECD vs Run Depth Chart Yes
Pressure to Break Gel Plot Yes
Pie Chart: Pressure Losses Drill String Yes2
Pie Chart: Pressure Losses Annulus Yes2
Pie Chart: Power Losses Drill String Yes
Pie Chart: Power Losses Annulus Yes
Pressure/ECD Report Yes3
Swab Open End Plot Yes
Swab Closed End Plot Yes
Surge Open End Plot Yes
Surge Closed End Plot Yes
Swab Surge Pressure and ECD Report No
Swab Surge Tripping Schedule Report Yes
Velocity @ Bit Plot Yes
Power Per Area Plot Yes
Impact Force Plot Yes
Power Plot No
5000.1.10.1 Page 30 of 46 May 2013
Draft
Go To “What’s In This Release?”
Functionality to Expect in This Release DecisionSpace® Well Engineering Software Release Notes
1Separate Bed Height vs MD, Cuttings Volume vs Depth, and Minimum Flowrate vs MD plots are available in WELLPLAN Next Generation. Suspended cuttings volume plot not available.
2The DecisionSpace® Well Engineering software Summary displays the pressure loss in the string, bit, and annulus but does not break the pressure loss into loss per component.
3DecisionSpace® Well Engineering software reports will contain information related to selected outputs.
Pressure Loss Plot Yes
Power vs Impact Force Plot No
Hydraulics Analysis Plots, Tables, and Reports
5000.1.10.1 Page 31 of 46 May 2013
Draft
Go To “What’s In This Release?”
Functionality to Expect in This Release DecisionSpace® Well Engineering Software Release Notes
General Functionality
Functionality Category Functionality In Release?
Datums/Elevations Set System Datum Yes
Create Default Site Elevation Yes
Set Wellhead Location (slot, offset, map, geographic)
No
Set Well Datum Yes
Working with Cases Create Cases from Casing Design Yes
Create Designs or Cases from OpenWells
No
Create Instant Case Yes
Work on Multiple Cases Simultaneously
Yes1
Well Explorer Functionality Well Explorer Tree Yes2
Copy String Editor Yes3
Copy Hole Section Yes
Copy Fluids Yes
Copy Wellpath Yes4
Audit/Change History Yes
Attachments No
Delete Design, Well, Wellbore, Site, Project, or Company
Yes
Find in Tree (method to search well explorer hierarchy)
No
User Assistance Online Help Yes
Input Wizard N/A5
Status Messages Yes6
Units Custom Unit System Yes
API, SI, Mixed API, and API US Survey Feet Unit System
Yes
Set Active Unit System Yes
Utilities Convert Units Yes7
MD/TVD Conversion Yes
5000.1.10.1 Page 32 of 46 May 2013
Draft
Go To “What’s In This Release?”
Functionality to Expect in This Release DecisionSpace® Well Engineering Software Release Notes
Picklist Editor No
Data Dictionary No
Volume Calculation No
Catalog Editor Yes
Wall Plot Composer No
Symbol Manager/Mapping Yes
Properties Edit/Create Tubular Properties Yes
Edit/Specify Company Properties
Yes
Edit/Specify Project Properties Yes
Edit/Specify Site Properties Yes
Edit/Specify Well Properties Yes
Edit/Specify Wellbore Properties
Yes
Edit/Specify Design Properties Yes
Edit/Specify Case Properties Yes
Sidetrack Well and Set Sidetrack Properties
No
Set Design Phase (prototype, plan, actual)
Yes
Data Locking Password Protect Company Properties
No
Lock Project No
Set Security Tight Groups Yes
Lock Site No
Lock Wellbore No
Workspaces Workspace Yes7
Default Workspace No
Data Import and Export Import/Export Yes8
Import Centralizer Placement from OptiCem Module
No
Libraries String Library Yes
Functionality Category Functionality In Release?
5000.1.10.1 Page 33 of 46 May 2013
Draft
Go To “What’s In This Release?”
Functionality to Expect in This Release DecisionSpace® Well Engineering Software Release Notes
1To simultaneously work on multiple cases when using the DecisionSpace® Well Engineering software, open the software multiple times and work with each case in a separate instance of the software. This will not require multiple licenses of the software.
2The DecisionSpace® Well Engineering software has some of the Well Explorer Tree functionality, although the implementation is different.
3Use the DecisionSpace® Well Engineering software Case Manager to copy a string from one case to another.
4In DecisionSpace® Well Engineering software, wellpath data can be copied between cases (using right-click menu, or CTRL C/CTRL V). However, it is not possible to drag/drop data between cases.
5The intuitive, output driven DecisionSpace® Well Engineering software design does not require an input wizard.
6WELLPLAN™ Status Messages have been significantly improved and replaced by intuitive messages strategically located throughout DecisionSpace® Well Engineering software.
7Just type a number and the unit label you are using, and the number will be converted to the unit used by the application.
Fluid Library Yes
Plots Vertical Section Yes
Plan View Yes
Inclination Yes
Azimuth Yes
Dogleg Severity Yes
Build Yes
Walk Yes
Absolute Tortuosity Yes
Relative Tortuosity Yes
Wellpath Table Yes
Geothermal Gradient Yes
Build Plane Curvature No
Walk Plane Curvature No
Schematic Schematic Yes
Functionality Category Functionality In Release?
5000.1.10.1 Page 34 of 46 May 2013
Draft
Go To “What’s In This Release?”
Functionality to Expect in This Release DecisionSpace® Well Engineering Software Release Notes
8In DecisionSpace® Well Engineering software, workspaces are called Layouts.
9In DecisionSpace® Well Engineering software, it is possible to import cases and strings only.
No Unicode Characters in File Names
You cannot import or export files that have Unicode characters (that is, characters that are not found on a U.S. keyboard) in a file name. The workaround is to rename such a file using only U.S. characters. This issue will be addressed in an upcoming release.
Existing Layouts
You will lose any existing layouts when you install the 5000.1.10.1 release. This issue will be addressed in an upcoming release.
5000.1.10.1 Page 35 of 46 May 2013
Draft
Go To “What’s In This Release?”
Fixed Issues DecisionSpace® Well Engineering Software Release Notes
Fixed Issues
Descriptions of Fixed Issues for the DecisionSpace® Well Engineering software are provided below.
Defect No. Description
912336 Small data discrepancy when switching from Bingham Plastic to Herschel Bulkley
912337 Calculated values should show up even when no plots are open
912338 Well list doesn't show a newly created well if you switch to another well under the same site
912339 Negative Air Gap reading in DecisionSpace® Well Engineering software
912340 DecisionSpace® Well Engineering software compatibility with other EDT applications
912341 Data from the Count column of the Bit Nozzle table disappears after inserting a row and undoing
912342 String editor grid columns cannot be resized
912343 Weird Behavior using the HB model, and change from Fann to Rheology (Pressure Loss Plot)
912345 Incorrect and unreadable message on the Hydraulic Summary
912347 Empty temporary message Hydraulic Summary
912349 Newtonian rheology parameter is incorrect (compared to classic) after switching from Fann data
912350 Geothermal Gradient missing validation
912353 Multiple casings with the same START depth don't show an error; need a validation
912356 Crash: NHibernate. Save the transient instance before flushing
912359 Layouts: Unable to access to the select box when clicking on the LAYOUT button
912361 MIN FLOW v ROP: Changes to STRING result in DISCREPANCY between Classic WELLPLAN and DecisionSpace® Well Engineering software
912361 Fluid Column Gradient Undo: If user clicks Undo after inputting data on the Fluid Column Gradient, returns an undesired result.
912362 Hidden Well Explorer/Properties windows makes user think the application has frozen.
912364 Report > The Centralization input only shows when the Standoff devices table is opened, otherwise it doesn’t show.
912365 Exception when deleting standoff devices: “Collection was modified, enumeration operation may not execute.”
5000.1.10.1 Page 36 of 46 May 2013
Draft
Go To “What’s In This Release?”
Fixed Issues DecisionSpace® Well Engineering Software Release Notes
912381 Refresh broken for Geothermal Gradient plot (error messages are persistent).
912382 Tricone bit showing as ‘read only’ two of the values that the bi-centered bits use.
912383 ‘Actual’ radio button does not gray out after selecting a design of a company which already has an Actual design.
912473 Wellpath obtained from the COMPASS application causes calculation errors.
912475 Installation batch file depended on a registry setting that only Landmark’s install would set.
912476 Updated the online help index.
Defect No. Description
5000.1.10.1 Page 37 of 46 May 2013
Draft
Go To “What’s In This Release?”
Known Issues DecisionSpace® Well Engineering Software Release Notes
Known Issues
Descriptions of Known Issues for the DecisionSpace® Well Engineering software are provided below.
Defect No. Description
906861 Exception when a User tries to open a case (from the recently opened cases) with no Tight group permissions
906863 Circulation Pressure: The First Calculation (string) differs from WELLPLAN behavior
906864 Hole section: Friction factors: toggling on/off using FF from hole or per operations has no effect on sensitivity
906865 Unchecked lines show on the legend after pasting "Copy to clipboard"
906866 The steady state swab‐surge results change depending up on the order in which the calculations are run. This is a defect in WELLPLAN and translates to DS Well Engineering as well.
906868 Missing validation that affects all Hydraulic Calculations when HB is selected on rheology Data
907411 Makeup Torque should not be a required field for non-Torque & Drag calculation
907413 When Collapse resistance is "0" calculations doesn't run (Hydraulics and TD)
907414 Inconsistent logging of user information in Audit logs
907415 When the Hole Section is shallower than the Wellpath, the Geothermal Gradient has weird behavior: NaN on Hydraulics Calculations
907416 Centralization Intervals output doesn't show the hyperlink
907417 POI > Torque Point, when POI=0, the rotating on bottom operation shows the torque at bit of the backreaming operation
907418 Missing information on the Operations TAB show up like validations in the affected and non‐affected plots
907421 Report: Adobe needs to be installed warning the first time the report is running (with Adobe X installed 10.1.4)
907422 Import/Export does not work when special language (Unicode) characters are used in file names
907424 When running ECD with HerschelBulkleyWithTemperatureEffect first then running BinghamPlasticWithBackpressure ECD, the results are different
907426 New (Copy of) Report takes LONG time to load when there's large number of centralizers or Survey stations
5000.1.10.1 Page 38 of 46 May 2013
Draft
Go To “What’s In This Release?”
Known Issues DecisionSpace® Well Engineering Software Release Notes
907427 Once the Case is created and the user decides to DO CHANGES ON DATUM PROPERTIES IN WELLPLAN, all hydraulics plots display an unreadable message.
908900 Enhancement: Hook Load, String Summary, and String Position outputs are affected by the Bending Stress Mag. Factor, even though there’s no user interface for it.
908902 Enhancement or defect: Discrepancy on the Steady State Swab and Surge on the ECD vs. Time plots.
909824 Switching the Datum on Riserless scenarios produces incorrect depth adjustment
912257 Min. Wt. Hel. Buckle (Tripping In) column disappears from the Hook Load data table when selecting "Measure at X ft from TD" radio button
913068 Affected backward compatibility for Riserless cases, when these cases are opened on WELLPLAN (offshore and subsea scenarios)
Defect No. Description
5000.1.10.1 Page 39 of 46 May 2013
Draft
Go To “What’s In This Release?”
Known Compatibility Issues With WELLPLAN™ Software DecisionSpace® Well Engineering Software
Known Compatibility Issues With WELLPLAN™ Software
There are issues in WELLPLAN software which have not been fixed that affect DecisionSpace® Well Engineering software. These forward-compatibility issues are listed below.
Exporting a Case from an Older Version of DecisionSpace® Well Engineering software
If you have a Case that had been exported from DecisionSpace® Well Engineering version 5000.1.10.0, and you try to import it into DecisionSpace® Well Engineering 5000.1.10.1, the fluid/mud density may be shown as 0.00 ppg. In order to fix this issue, run the DB Update (go to Tools > DS Well Engineering Updates > Apply DS Well Eng SQL Update) after importing a case from the older version of DecisionSpace® Well Engineering. Defect 3659.
Using Existing Stand Off Devices (SODs) from WELLPLAN™ in DecisionSpace® Well Engineering software
For Restoring Force; if you use existing Stand Off Devices from WELLPLAN™, those will NOT have restoring force. You can manually enter the restoring force for these. Defect 3380.
5000.1.10.1 Page 40 of 46 May 2013
Draft
Go To “What’s In This Release?”
International Trade Compliance DecisionSpace® Well Engineering Software Release Notes
International Trade Compliance
This application is manufactured or designed using U.S. origin technology and is therefore subject to the export control laws of the United States. Any use or further disposition of such items is subject to U.S. law. Exports from the United States and any re-export thereafter may require a formal export license authorization from the government. If there are doubts about the requirements of the applicable law, it is recommended that the buyer obtain qualified legal advice. These items cannot be used in the design, production, use, or storage of chemical, biological, or nuclear weapons, or missiles of any kind.
The ECCN's provided in Release Notes represent Landmark Graphics' opinion of the correct classification for the product today (based on the original software and/or original hardware). Classifications are subject to change. If you have any questions or need assistance please contact us at [email protected]
Under the U.S. Export Administration Regulations (EAR), the U.S. Government assigns your organization or client, as exporter/importer of record, responsibility for determining the correct authorization for the item at the time of export/import. Restrictions may apply to shipments based on the products, the customer, or the country of destination, and an export license may be required by the Department of Commerce prior to shipment. The U.S. Bureau of Industry and Security provides a web site to assist you with determining the need for a license and with information regarding where to obtain help.
The URL is: http://www.bis.doc.gov
Definitions
CCATS (Commodity Classification Automated Tracking System) - the tracking number assigned by the U.S. Bureau of Industry and Security (BIS) to products formally reviewed and classified by the government. The CCATS provides information concerning export/re-export authorizations, available exceptions, and conditions.
ECCN - Export Control Classification Number - The ECCN is an alpha-numeric code, e.g., 3A001, that describes a particular item or type of item, and shows the controls placed on that item. The CCL (Commerce Control List) is divided into ten broad categories, and each category is further subdivided into five product groups. The CCL is available on the EAR Website.
5000.1.10.1 Page 41 of 46 May 2013
Draft
Go To “What’s In This Release?”
International Trade Compliance DecisionSpace® Well Engineering Software Release Notes
The ECCN number, License Type, and the CCATS Numbers for this product are included in the table below. Also included is the date the table was last updated.
Product/Component/R5000 ECCN Number
License CCATS Number
Last Date Updated
Engineer’s Data Model (EDM) 5D002 ENC G060075 3/29/2010
Engineer’s Data Model Software Development Kit (EDM SDK)
5D002 ENC G060075 3/29/2010
5000.1.10.1 Page 42 of 46 May 2013
Draft
Go To “What’s In This Release?”
Contacting Landmark for Support DecisionSpace® Well Engineering Software Release Notes
Contacting Landmark for Support
Landmark software operates Technical Assistance Centers (TACs) in Australia, the United Kingdom, and the United States. Additional support is also provided through regional support offices around the world.
Regional Offices
Support Via Web Portal
Support information is always available on the Landmark Customer Support internet page. You can also submit a support request directly to Landmark Customer Support though the Landmark Customer Support Portal:
http://css.lgc.com/InfoCenter/index?page=home
To request support in the Landmark Customer Support Portal:
1. In the PIN and Password text boxes in the Please Sign In area, enter your registered personal identification number and password.
2. Click the Sign In button.
3. In the Case & Defect Information area, click the Create A New Case link.
4. In the Create Case area, fill in the necessary information. Provide details about your technical concern, including any error messages, the workflow steps where the problem occurred, and attachments of screen shots that display the problem. To help understand the concern, you can also attach other files too, such as example data files.
5. Click the Submit button. A support analyst in the nearest Technical Assistance Center will respond to your request.
5000.1.10.1 Page 43 of 46 May 2013
Draft
Go To “What’s In This Release?”
Technical Assistance Centers DecisionSpace® Well Engineering Software Release Notes
Technical Assistance Centers
Regional Offices
For contact information for regional offices, see the Contact Support page located at:
http://css.lgc.com/InfoCenter/index?page=contact§ion=contact
If problems cannot be resolved at the regional level, an escalation team is called to resolve your incidents quickly.
Asia, Pacific
8:00 am - 5:00 pm Local Time
Monday-Friday, excluding holidays
61-8-9481-4488 (Perth, Australia)
Toll Free 1-800-448-488
Fax: 61-8-9481-1580
Email:
Europe, Africa, Middle East
9:00 am - 5:30 pm Local Time
Monday - Friday, excluding holidays
44-1372-868686 (Leatherhead, UK)
Fax: 44-1224-723260 (Aberdeen, UK)
Fax: 44-1372-868601 (Leatherhead, UK)
Email:
Latin America
(Spanish, Portuguese, English)
7:00 am - 5:00 pm Local Time
713-839-3405 (Houston, TX, USA)
Fax: 713-839-3646
Email:
North America
7:30 am - 5:30 pm Central Standard Time
Monday - Friday, excluding holidays
713-839-2200 (Houston, TX, USA)
Toll Free 1-877-435-7542
(1-877-HELP-LGC)
Fax: 713-839-2168
Email:
5000.1.10.1 Page 44 of 46 May 2013
Draft
Go To “What’s In This Release?”
Technical Assistance Centers DecisionSpace® Well Engineering Software Release Notes
© 2013 Halliburton
All Rights Reserved
Information in this document is subject to change without notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of Halliburton. Unauthorized reproduction or distribution of this documentation, or any portion of it, may result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under law.
Halliburton may have patents, patent applications, trademarks, copyrights, or other intellectual property rights covering subject matter in this document. The furnishing of this document does not give you any license to these patents, trademarks, copyrights, or other intellectual property.
Halliburton | Landmark Software & Services2107 CityWest Blvd, Building 2, Houston, Texas 77042-3051, USA
P.O. Box 42806, Houston, Texas 77242, USAPhone:713-839-2000, FAX: 713-839-2015
Internet: www.halliburton.com/landmark
TrademarksD Drill View, 3D Drill View KM, 3D Surveillance, 3DFS, 3DView, Active Field Surveillance, Active Reservoir Surveillance, Adaptive Mesh Refining, ADC, Advanced Data Transfer, Analysis Model Layering, ARIES, ARIES DecisionSuite, Asset Data Mining, Asset Decision Solutions, Asset Development Center, Asset Development Centre, Asset Journal, Asset Performance, AssetConnect, AssetConnect Enterprise, AssetConnect Enterprise Express, AssetConnect Expert, AssetDirector, AssetJournal, AssetLink, AssetLink Advisor, AssetLink Director, AssetLink Observer, AssetObserver, AssetObserver Advisor, AssetOptimizer, AssetPlanner, AssetPredictor, AssetSolver, AssetSolver Online, AssetView, AssetView 2D, AssetView 3D, Barrier Assurance Monitoring, BLITZPAK, CartoSnap, CasingLife, CasingSeat, CDS Connect, CGMage Builder, Channel Trim, COMPASS, Contract Generation, Corporate Data Archiver, Corporate Data Store, Data Analyzer, DataManager, DataServer, DataStar, DataVera, DBPlot, Decision Management System, DecisionSpace, DecisionSpace 3D Drill View, DecisionSpace 3D Drill View KM, DecisionSpace AssetLink, DecisionSpace AssetPlanner, DecisionSpace AssetSolver, DecisionSpace Atomic Meshing, DecisionSpace Base Module, DecisionSpace Desktop, DecisionSpace Geosciences, DecisionSpace GIS Module, DecisionSpace GRC Module, DecisionSpace Nexus, DecisionSpace Reservoir, DecisionSuite, Deeper Knowledge. Broader Understanding., Depth Team, Depth Team Explorer, Depth Team Express, Depth Team Extreme, Depth Team Interpreter, DepthTeam, DepthTeam Explorer, DepthTeam Express, DepthTeam Extreme, DepthTeam Interpreter, Desktop Navigator, DESKTOP-PVT, DESKTOP-VIP, DEX, DIMS, Discovery, Discovery 3D, Discovery Asset, Discovery Framebuilder, Discovery PowerStation, Discovery Suite, DMS, Drillability Suite, Drilling Desktop, DrillModel, DrillNET, Drill-to-the-Earth-Model, Drillworks, Drillworks ConnectML, Drillworks Predict, DSS, Dynamic Frameworks to Fill, Dynamic Reservoir Management, Dynamic Surveillance System, EDM, EDM AutoSync, EDT, eLandmark, Engineer’s Data Model, Engineer’s Desktop, Engineer’s Link, ENGINEERING NOTES, eNotes, ESP, Event Similarity Prediction, ezFault, ezModel, ezSurface, ezTracker, ezTracker2D, ezValidator, FastTrack, Field Scenario Planner, FieldPlan, For Production, FrameBuilder, Frameworks to Fill, FZAP!, GeoAtlas, GeoDataLoad, GeoGraphix, GeoGraphix Exploration System, Geologic Interpretation Component, Geometric Kernel, GeoProbe, GeoProbe GF DataServer, GeoSmith, GES, GES97, GesFull, GESXplorer, GMAplus, GMI Imager, Grid3D, GRIDGENR, H. Clean, Handheld Field Operator, HHFO, High Science Simplified, Horizon Generation, I2 Enterprise, iDIMS, iEnergy, Infrastructure, iNotes, Iso Core, IsoMap, iWellFile, KnowledgeSource, Landmark (as a service), Landmark (as software), Landmark Decision Center, LandNetX, Landscape, Large Model, Lattix, LeaseMap, Limits, LithoTect, LogEdit, LogM, LogPrep, MagicDesk, Make Great Decisions, MathPack, MDS Connect, MicroTopology, MIMIC, MIMIC+, Model
5000.1.10.1 Page 45 of 46 May 2013
Draft
Go To “What’s In This Release?”
Technical Assistance Centers DecisionSpace® Well Engineering Software Release Notes
Builder, NETool, Nexus (as a service), Nexus (as software), Nexus View, Object MP, OneCall, OpenBooks, OpenJournal, OpenLink, OpenSGM, OpenVision, OpenWells, OpenWire, OpenWire Client, OpenWire Server, OpenWorks, OpenWorks Development Kit, OpenWorks Production, OpenWorks Well File, Operations Management Suite, PAL, Parallel-VIP, Parametric Modeling, Permedia, Petris WINDS Enterprise, PetrisWINDS, PetroBank, PetroBank Explorer, PetroBank Master Data Store, PetroWorks, PetroWorks Asset, PetroWorks Pro, PetroWorks ULTRA, PLOT EXPRESS, PlotView, Point Gridding Plus, Pointing Dispatcher, PostStack, PostStack ESP, PostStack Family, Power Interpretation, PowerCalculator, PowerExplorer, PowerExplorer Connect, PowerGrid, PowerHub, PowerModel, PowerView, PrecisionTarget, Presgraf, PressWorks, PRIZM, Production, Production Asset Manager, PROFILE, Project Administrator, ProMAGIC Connect, ProMAGIC Server, ProMAX, ProMAX 2D, ProMax 3D, ProMAX 3DPSDM, ProMAX 4D, ProMAX Family, ProMAX MVA, ProMAX VSP, pSTAx, Query Builder, Quick, Quick+, QUICKDIF, Quickwell, Quickwell+, Quiklog, QUIKRAY, QUIKSHOT, QUIKVSP, RAVE, RAYMAP, RAYMAP+, Real Freedom, Real Time Asset Management Center, Real Time Decision Center, Real Time Operations Center, Real Time Production Surveillance, Real Time Surveillance, Real-time View, Recall, Reference Data Manager, Reservoir, Reservoir Framework Builder, RESev, ResMap, Resolve, RTOC, SCAN, SeisCube, SEISINFO, SeisMap, SeisMapX, Seismic Data Check, SeisModel, SeisSpace, SeisVision, SeisWell, SeisWorks, SeisWorks 2D, SeisWorks 3D, SeisWorks PowerCalculator, SeisWorks PowerJournal, SeisWorks PowerSection, SeisWorks PowerView, SeisXchange, Semblance Computation and Analysis, Sierra Family, SigmaView, SimConnect, SimConvert, SimDataStudio, SimResults, SimResults+, SimResults+3D, SIVA+, SLAM, Smart Change, Smart Deploy, Smart Flow, Smart Skills, Smart Start, Smart Sustain, Smart Transform, Smart Vision, SmartFlow, smartSECTION, smartSTRAT, Spatializer, SpecDecomp, StrataMap, StrataModel, StratAmp, StrataSim, StratWorks, StratWorks 3D, StreamCalc, StressCheck, STRUCT, Structure Cube, Surf & Connect, SurfNet, SynTool, System Start for Servers, SystemStart, SystemStart for Clients, SystemStart for Servers, SystemStart for Storage, Tanks & Tubes, TDQ, Team Workspace, TERAS, T-Grid, The Engineer’s DeskTop, Total Drilling Performance, TOW/cs, TOW/cs Revenue Interface, TracPlanner, TracPlanner Xpress, Trend Form Gridding, Trimmed Grid, Tubular Basic, Turbo Synthetics, Unconventional Essentials, VESPA, VESPA+, VIP, VIP-COMP, VIP-CORE, VIPDataStudio, VIP-DUAL, VIP-ENCORE, VIP-EXECUTIVE, VIP-Local Grid Refinement, VIP-THERM, vSpace, vSpace Blueprint, vSpace Onsite, WavX, Web Editor, Well H. Clean, Well Seismic Fusion, Wellbase, Wellbore Planner, Wellbore Planner Connect, WELLCAT, WELLPLAN, WellSolver, WellXchange, WOW, Xsection, You’re in Control. Experience the difference., ZAP!, ZEH, ZEH Plot, ZetaAnalytics, Z-MAP, Z-MAP Plus, and ZPS are trademarks, registered trademarks, or service marks of Halliburton.
All other trademarks, service marks, and product or service names are the trademarks or names of their respective owners.
NoteThe information contained in this document is subject to change without notice and should not be construed as a commitment by Halliburton. Halliburton assumes no responsibility for any error that may appear in this manual. Some states or jurisdictions do not allow disclaimer of expressed or implied warranties in certain transactions; therefore, this statement may not apply to you.
Third Party Licenses and AttributionsHalliburton acknowledges that certain third party code has been bundled with, or embedded in, its software. The licensors of this third party code, and the terms and conditions of their respective licenses, may be found at the following location:
[InstallationDirectory]\Documentation\Third_Party.pdf
5000.1.10.1 Page 46 of 46 May 2013
Draft
Go To “What’s In This Release?”
Technical Assistance Centers DecisionSpace® Well Engineering Software Release Notes
DisclaimerThe programs and documentation may provide links to external web sites and access to content, products, and services from third parties. Halliburton is not responsible for the availability of, or any content provided on, third party web sites. You bear all risks associated with the use of such content. If you choose to purchase any products or services from a third party, the relationship is directly between you and the third party. Halliburton is not responsible for: (a) the quality of third party products or services; or (b) fulfilling any of the terms of the agreement with the third party, including delivery of products or services and warranty obligations related to purchased products or services. Halliburton is not responsible for any loss or damage of any sort that you may incur from dealing with any third party.