i well file release notes

June 2008

iWellFile™ Software Version 5000.1.0

Release Notes

Contents

Introduction ................................................................................................................................. 2

System Requirements ................................................................................................................. 3

Third-Party Software .................................................................................................................. 8

International Trade Compliance .................................................................................................. 9

Installation .................................................................................................................................. 17

Licensing ..................................................................................................................................... 18

Database Upgrade (SQL Server 2005, SQL Server 2005 Express, and Oracle) ........................ 21

Enhancements and New Functionality ....................................................................................... 22

Problems Fixed ........................................................................................................................... 29

Known Problems ......................................................................................................................... 32

Contacting Support ..................................................................................................................... 34

5000.1 of 41 June 2008

Landmark iWellFile™ Software Version 5000.1.0 Release Notes

IntroductionWelcome to Landmark's Web-based iWellFile™ software version 5000.1.0 release. iWellFile software is a Web-based application that provides instant access to well operations information and analytical results available within the Engineer's Data Model™ database (EDM™ database). iWellFile software provides secure access to selected information and analysis data across the entire suite of Engineer's Desktop™ (EDT™) software applications.

iWellFile software is designed to support both the 5000.0 and 5000.1 releases of the Engineer’s Desktop software suite. The Engineer’s Desktop software suite provides major new functionality in support of the Drilling and Completions applications on the shared EDM database.

iWellFile software will not run against earlier EDT software versions, such as 2003.22.x, 2003.21.x, 2003.16.x or 2003.14.x.

The following sections of this document detail more general information about the iWellFile soft-ware release and the enhancements provided with release 5000.1. Contact your Landmark Sales or Support Representative for further information on upcoming iWellFile software release plans.

5000.1 of 41 June 2008


System Requirements

Client

Recommended for Windows XP Platform Minimum for Windows XP Platform

• Windows® XP Professional, SP 2 • Windows® XP Professional, SP 2

• 2 GHz or higher • 1 GHz processor

• 1 GB RAM or greater • 512 MB RAM or greater

• SVGA Color Monitor • SVGA Color Monitor

• 106-key Windows-ready integrated keyboard

• 106-key Windows-ready integrated keyboard

• MS-compatible mouse or pointing device

• MS-compatible mouse or pointing device

• TCP/IP based network connection 100 Mbps

• TCP/IP based network connection 10 Mbps

• 2-4 GB or better disk space • 2 GB disk space

• CD-ROM drive (not required if installing from a network location)

• CD-ROM drive (not required if installing from a network location)

5000.1 of 41 June 2008


Client Software Requirements

The Client System requires the following applications:

Internet Explorer 6.0 or a newer version

Adobe Acrobat Reader 8 or a newer version

A Windows Metafile (WMF) Viewer for non-Windows XP systems

Server

Popups

Certain components of iWellFile™ software require the use of “popup” windows. Therefore, popups must be enabled in Internet Explorer for full functionality of the application.

Recommended for Windows 2003 Server Platform

Minimum for Windows 2003 Server Plat-form

Windows® 2003 Server, SP 1 Windows® 2003 Server, SP 1

2 x 3 GHz or higher 2 GHz processor

4 GB RAM or greater 2 GB RAM or greater

SVGA Color Monitor SVGA Color Monitor

106-key Windows-ready integrated keyboard 106-key Windows-ready integrated keyboard

MS-compatible mouse or pointing device MS-compatible mouse or pointing device

TCP/IP-based network connection 100 Mbps TCP/IP-based network connection 10 Mbps

4-6 GB or better disk space 4 GB disk space

CD-ROM drive (not required if installing from a network location)

CD-ROM drive (not required if installing from a network location)

5000.1 of 41 June 2008


Server Software Requirements

The Windows 2003 Server System requires the following additional Windows components:

Application Server Components:

• Application Server Console• ASP.NET• Internet Information Services (IIS)

Internet Information Services Manager Components:

• Common Files• Internet Information Services Manager• World Wide Web Service

World Wide Web Service Components:

• Active Server Pages• Server Side Includes• World Wide Web Service.

Web Server Support

iWellFile™ software is certified using Internet Information Server (IIS) 6.0 on a Windows 2003 Server.

A typical iWellFile software server should have approximately 20GB of disk space available to support necessary services/installations such as:

• iWellFile software server installation and supporting EDT™ software installation (approximately 2GB)

• Operating system and swap file. Landmark recommends a 4GB swap file to support the various services that run on the server

• EDM™ Publishing Service (EPS) service and resulting report cache (size depends on number of reports cached)

Browser Support

iWellFile software supports the use of Internet Explorer 6.0 or a newer version. Netscape Navigator, Firefox and other web browsers are not supported.

5000.1 of 41 June 2008


Certain components of iWellFile™ software require the use of "popup" windows. Therefore, pop-ups must be enabled on the iWellFile software web page for full functionality of the application.

Operating System Support

Windows 2003 Server is certified for use with iWellFile software.

Windows XP is not Supported or Certified as a production web server due to IIS network connection limitation imposed by Microsoft. Windows XP is only available for those people needing to review or demonstrate iWellFile software functionality without making the application available as a published web-server application. Windows XP Service Pack 2 is fully supported for client users of iWellFile software accessing the application from their Desktop.

ODBC Drivers

The following table lists ODBC Drivers and their corresponding version numbers used by Land-mark during testing of the iWellFile software 5000.1 release. This table describes which ODBC drivers our test labs have certified and which drivers Landmark supports for use with EDM™ database applications.

No longer supported for the 5000.1 release: Oracle 9i, Microsoft MSDE, Microsoft SQL Server 2000, Windows 2000.

ODBS Driver Name Version Supported

Microsoft SQL Server 2005 and SQL Server 2005 Express

Depends on the operating system:

• Windows XP: 2000.85.1117.00• Windows 2003 Server: 2000.86.3959.00• Windows Vista: 6.00.6000.16386

Supported (replaces MS-DE, which is no longer sup-ported)

Microsoft SQL Native Client Driver (same on all versions of SQL Server)

2005.90.3042.00 Supported

Oracle 10g ODBC Driver 10.02.00.03 Supported

5000.1 of 41 June 2008


Configuration Combinations For Engineer’s Desktop, DecisionSpace, and OpenWorks

Ope

ratin

g Sy

stem

Applications

Engineer’s Desktop™ software 5000.1, on Oracle 10g

DecisionSpace® software 5000.0.0, on Oracle 10g

Engineer’s Desktop™ software 5000.1,on SQL Server 2005 Express

DecisionSpace® software 5000.0.0/OpenWorks® software 5000.0.0 on Oracle 10g

Windows Vista Enterprise

yes yes yes yes;

Windows XP Professional

yes yes yes yes

Windows 2003 Server

yes untested yes untested

5000.1 of 41 June 2008


Third-Party SoftwareLandmark uses various third-party applications in the development of its software.

Landmark acknowledges that certain third party code has been bundled with, or embedded in, Landmark’s software. The licensors of this third party code, and the terms and conditions of their respective licenses, may be found at the following location:

[Installdir]\Help\Third_Party.pdf

The following table describes the third party applications that are installed by Release 5000.1.

This table is from the last iWellFile™ software release

Product/Package Windows® XP Professional and Microsoft ® Windows Server 2003

ASE ChartDirector 3.1.0.3

CeTe DynamicPDF™ Merger for .NET 4.0.3

FLEXlm license software ECCN 5D00B.2 11.4

Java 2 Platform, Standard Edition (J2SE) Binary ECCN 5D99B.1 - Sun Mircrosystems Inc.

1.6.0

Oracle Data Access Components (ODAC) - Oracle 10.2.0.2

AxInterop.AcroPDFLib.dll and Interop.AcroPDFLib.dll are generated by Visual Studio IDE to wrapper Adobe Reader ActiveX component - AcroPDF.dll - which is there after installing Adobe Reader. It should be called Acrobat SDK according to adobe definition.

5000.1 of 41 June 2008


International Trade ComplianceThis application is manufactured or designed using U.S. origin technology and is therefore subject to the export control laws of the United States. Any use or further disposition of such items is subject to U.S. law. Exports from the United States and any re-export thereafter may require a formal export license authorization from the government. If there are doubts about the requirements of the applicable law, it is recommended that the buyer obtain qualified legal advice. These items cannot be used in the design, production, use, or storage of chemical, biological, or nuclear weapons, or missiles of any kind.

The ECCNs provided in Release Notes represent Landmark Graphics' opinion of the correct classification for the product today (based on the original software and/or original hardware). Classifications are subject to change. If you have any questions or need assistance please contact us at [email protected]

Under the U.S. Export Administration Regulations (EAR), the U.S. Government assigns your organization or client, as exporter/importer of record, responsibility for determining the correct authorization for the item at the time of export/import. Restrictions may apply to shipments based on the products, the customer, or the country of destination, and an export license may be required by the Department of Commerce prior to shipment. The U.S. Bureau of Industry and Security provides a website to assist you with determining the need for a license and with information regarding where to obtain help.

The URL is: http://www.bis.doc.gov

Definitions

CCATS (Commodity Classification Automated Tracking System) - the tracking number assigned by the U.S. Bureau of Industry and Security (BIS) to products formally reviewed and classified by the government. The CCATS provides information concerning export/re-export authorizations, available exceptions, and conditions.

ECCN - Export Control Classification Number - The ECCN is an alpha-numeric code, e.g., 3A001, that describes a particular item or type of item, and shows the controls placed on that item. The CCL (Commerce Control List) is divided into ten broad categories, and each category is further subdivided into five product groups.

The CCL is available on the EAR Website at http://www.access.gpo.gov/bis/ear/ear_data.html#ccl

[email protected]

[email protected]

http://www.bis.doc.gov

http://www.access.gpo.gov/bis/ear/ear_data.html#ccl

5000.1 of 41 June 2008


The ECCN Number, License Type, and the CCATS Numbers for this product are included in the table below. Also included is the date the table was last updated.

Product/Component/R5000 ECCN Number

License CCATS Number

Last Date Updated

iWellFile™ software 5D002 ENC G057687 2/11/2008

5000.1 of 41 June 2008


Other Requirements

Space Requirements for Individual Applications and Tools

The table below shows the minimum disk space requirements for various installation combinations (this includes space needed for Installation temporary files):

Screen Resolutions/Video

If you experience display problems when running wellbore schematics from within iWellFile™ software, upgrade your video driver to the latest version.

When using PROFILE software, the following are required:

• For the 1D and 2D schematics, any NVIDIA or ATI card from the past two years is recommended (e.g., NVIDIA GeForce 3, NVIDIA Quadro FX Go700, or ATI Radeon 7500 onwards).

Applications Approximate Disk Space Needed to Install

Engineer’s Data Model™ (EDM™) database• Administration Utility (required)• SQL Server Utility (required)• Drilling Data Migration• Database Upgrade Utilities

780 MB (Required support files will be copied into the Windows installation directory; the installation of the EDM™ database and SQL Server 2005 support and temporary installation files requires 400 MB of disk space)

Drilling & Completions: Engineering• COMPASS™ software• CasingSeat™ software• StressCheck™ software• Well Cost™ software• WELLPLAN™ software

280 MB

Drilling & Completions: Well Data Management• OpenWells® software• PROFILE™ software• Data Analyzer™ software• Real-Time View™ software

250 MB

TOTAL: Everything ~2.0 GB

Recommended Minimum

• 1024 x 768 or higher • 1024 x 768

5000.1 of 41 June 2008


• For full 3D visualization, the latest graphic card from NVIDIA or ATI would be recommended along with 1.5Ghz+ processor with the above specification for the 1D or 2D as the minimum.

Miscellaneous

• Applications require you to install a current Landmark LAM or a FLEXnet Publisher dongle (bitlock) for licensing purposes. Landmark does not distribute FLEX dongle bitlocks for use on application servers.

• Applications require Microsoft Data Access Components (MDAC) version 2.8 or higher. The Setup Program automatically installs MDAC 2.8 if necessary.

• Windows XP and Vista users must install all Critical and Recommended Windows Updates.

• Drilling and Completions Oracle users must use Oracle 10g. Oracle 9i is no longer supported.

• You need Internet Explorer 7.0 for a successful installation.

EDM™ software Installshield and Microsoft SQL Server 2005 Express Install Requirements

The Engineer’s Desktop™ software installation always copies required support files into the Win-dows installation directory. This is in addition to disk space required for the EDM database pro-gram files, which go into a separate directory. The installation of the EDM database and Microsoft SQL Server 2005 Express support files requires approximately 30 MB of disk space for files, as well as an additional 50 MB for temporary files created by the installation.

Microsoft SQL Server Express 2005 Install Behavior with SQL Server 2005 Client/SQL Server 2005

Microsoft SQL Server Express 2005 (Microsoft’s replacement for MSDE) is the standalone database provided with the Engineer’s Desktop software 5000.1 release. Microsoft SQL Server Express 2005 is a technology that provides local data storage that is compatible with Microsoft SQL Server 2005. It is designed and optimized for use on smaller computer systems, including a single-user computer or small workgroup server.

Microsoft SQL Server Express 2005 installation issues impacting PCs with SQL Server installed are listed in “Microsoft SQL Server Express 2005 Installation Issues” in the EDM Installation Guide.

5000.1 of 41 June 2008


Upgrading the EDM Database

This installation is NOT an upgrade from a previous version of the Engineer’s Data Model™ (EDM™) database. The EDM database Installation is meant for new users of the Engineer’s Data Model™ database. If you are currently using a pre-2003.14 version of the EDM database, you must upgrade your EDM database to at least 2003.14 prior to running the Multi-Version Database Upgrade Utility (EDMPatchDB.exe) to upgrade to the 5000.1 release.

Note that once the EDM database has been upgraded to 5000.1, you will no longer be able to access it using the earlier applications. Consequently, if you intend to run both older and 5000.1 applications, you should make a copy of your older database and upgrade the copy to 5000.1. This leaves your older database accessible by older applications.

For information on upgrading the Engineer’s Data Model database, or migrating data to the 5000.1 version of EDM database, refer to Planning the EDT Installation (EDT_PlanningInstall.pdf), and the EDM Drilling Database Guide (EDM_Drilling_Database.pdf).

Installing With Previous Versions

EDT™ software 5000.1 can co-exist with previous versions of EDT software on the same machine. However, LAM 5000 will not co-exist with previous versions of LAM (FLEXlm license server) on the same machine. Previous versions of LAM must be uninstalled before you install the 5000.1 release (make sure to stop the FLEX service before uninstalling LAM 2003).

To run EDT software 5000.1 and a previous version of the EDT software on the same machine, you must point one or both versions of EDT software to a LAM server located on a remote machine, since only one version of LAM can run locally. Make sure that you stop the FLEX service and uninstall any 2003 or older versions of LAM before installing the 5000.1 release.

Before you can upgrade your existing EDM database version, the database must first be upgraded to at least 2003.14.

Microsoft Security Warnings When Installing

A security warning may appear when trying to install software, due to security restrictions imposed by recent Microsoft security updates:

“Security Warning: Do you want to run this software?”

Simply click Run to proceed with the EDM database installation.

5000.1 of 41 June 2008


Install Is Now Fully Compliant with Microsoft® Windows® Installer

The installation is now fully compliant with Microsoft® Windows® Installer (MSI). Windows Installer enables better corporate deployment, and provides a standard format for component management.

Online Help Viewing Problems Due To Microsoft Security Updates

Some Microsoft security updates cause problems for the following online Help files:

• WebHelp, which is comprised of uncompiled HTML files (Windows XP SP 2, and Windows Vista)

• HTMLHelp (.chm) files accessed from a server machine (all platforms).

These issues are discussed in detail below.

Windows XP SP2 and Windows Vista Default Security Settings Block Some Online Help (WebHelp)

Windows XP SP2 and Windows Vista include improvements to Internet Explorer security that are intended to help most users by stopping local web pages that contain “active content” from accessing your computer maliciously. “Active content” includes Java Script, Java applets and ActiveX controls. Even very innocuous Java Script such as that found in online help is deemed by Microsoft to be active content, and will trigger this security setting. OpenWells® software, iWellFile™ software and EDM™ Administration Utility use WebHelp files of this type.

When you try to open the help file in either of these two applications, Internet Explorer displays a light-yellow information bar, warning you that it is blocking active content. (Note that this behavior only occurs in Internet Explorer, not in other browsers, such as NetScape or Mozilla). The following graphic illustrates the behavior.

Internet Explorer pops up this information bar and blocks the content.

5000.1 of 41 June 2008


Temporary Solution

If you want to view the help file, click the bar and select Allow Blocked Content from the drop-down menu. A warning dialog will appear, which you must acknowledge by clicking Yes. Now you will be able to view the help page. This will occur each time you access the help.

Permanent Solution

You may choose to permanently allow Internet Explorer to view Active Content on local files. This will prevent the warning from appearing again. The permanent solution is to turn off the security check for active content in the Internet Explorer.

To turn off the active content security check in the Internet Explorer for the local machine:

1. From the Tools menu in Internet Explorer, select Internet Options.

2. Navigate to the Advanced tab in the Internet Options dialog and then scroll down to the Security section.

3. Enable the checkbox labeled “Allow active content to run in files on My Computer”.

Please note that this may allow malicious active content in files on your local computer to cause problems, so you should only do this if you feel confident in your computer's security measures.

Cannot Open Help Files Located On A Server After You Install Security Update 896358 Or Security Update 840315

For Windows XP and Windows 2003 Server, installing recent Microsoft security updates (896354 and 840315) mean that .chm files (HTMLHelp) may not display correctly under some circumstances. The problems do not occur if the help files are on a local drive (rather than a mapped drive).

After installing these Microsoft security updates on a server machine—where .chms (HTML Help files) are stored for viewing and downloading—if you open a .chm file sitting on that server, you will receive an “Action Cancelled” error on the .Help file's viewer frame. The TOC and Index display normally. No matter which topic you try to view using the TOC or Index, an “Unable to open this web page” message appears in the .Help file's viewer frame. This problem does not occur if the help files are on a local drive (rather than a server or mapped drive).

The reason for this is that the Microsoft security updates disable all Internet Security zones except the Local Machine zone.

If the help files reside on a server or mapped drive, you can apply the fixes suggested in one or more of the following Microsoft knowledge base articles in order to access the help:

5000.1 of 41 June 2008


• KB902225 if the help file does not open at all (http://support.microsoft.com/kb/902225)

• KB896054 if the help file opens, and displays the index but no contents (http://support.microsoft.com/kb/896054)

IMPORTANT! The Microsoft Knowledge Base fixes (KB896054 and KB902225) require adjusting the registry on the server machine.

Be aware that you cannot solve this problem by adjusting the Security Zones feature in Internet Options in Internet Explorer. It MUST be done via the server’s registry. There is no other workaround other than moving the Help files to the local machine.

5000.1 of 41 June 2008


InstallationThe iWellFile™ software is delivered via Electronic Delivery System using the Landmark Soft-ware Manager tool. For complete instruction on installing and configuring iWellFile software refer to the iWellFile™ Software Version 5000.1 Installation Guide (iWellFile_Install_Guide.pdf).

5000.1 of 41 June 2008


LicensingLandmark's Application Manager (LAM) is the license system used to control access to Landmark applications. LAM is based on Macrovision's FLEXnet Publisher. A new LAM version is required for the 5000.1 release. You cannot have both Release 2003 and Release 5000.x license files running on the same machine.

FLEXnet Publisher licensing is available for networked application and standalone application use. FLEXnet Publisher standalone licensing may be used in conjunction with a network card or through a FLEXnet Publisher dongle (bitlock) where no PC network identification is possible.

Netsecure, Sentinel bitlocks and Crypkey have been discontinued by Landmark and are not supported by Release 5000.1 products.

LAM 5000.1 for Windows now includes a utility called Mobile Checkout, which allows you to “Borrow” (temporarily check out) a network license to use when a computer, such as a laptop, is disconnected from the network. Performing a Borrow writes encrypted information on your laptop which preserves a mobile license for the user when disconnected from the network. The license can then be used on an individual computer for a time specified when the user checks out the license. The license is returned to the server licenses when either the user uses the early return procedure or the specified time limit is reached. When a license is checked out the number of available licenses on the server is reduced by one. All Drilling applications except OpenWire® software can utilize the “Borrow” feature in the Mobile Checkout utility. For more information, refer to the LAM Guide—Linux, Solaris, and Windows.

For the Engineer’s Desktop™ (EDM™) database applications to run, EDM database 5000.1 applications require that an “EDM database” license feature is available from the customer's licensing server. The EDM database license is handled as a Group Checkout for each application user on a particular PC. Only one EDM database license is checked out for all Engineer's Desktop™ software applications run by a user on a single machine. Therefore, clients will need to acquire a set of EDM database licenses based on their expected concurrent user level. Please contact your local Landmark representative for EDM database licensing.

IMPORTANT! If you have a 2003 version of LAM, YOU MUST STOP THE FLEX SERVICE, THEN UNINSTALL LAM 2003 before installing LAM 5000.

Failure to uninstall all previous versions of LAM before installing LAM 5000 will result in a duplicate FLEXnet Publisher service that replicates itself until it crashes Windows. The procedures for uninstalling LAM are detailed in the section “LAM Uninstall” in the LAM Guide—Linux, Solaris, and Windows (LAM.pdf).

To run EDT™ software 5000.1 and a previous version of the EDT software applications on the same machine, you must point one or both versions of EDT software to a LAM server located on a remote machine, since only one version of LAM can run locally.

5000.1 of 41 June 2008


You must obtain new licenses for all Release 5000.1 products.

To re-license, customers must contact their local Landmark representative. Refer to the LAM Guide—Linux, Solaris, and Windows (LAM.pdf) for details. (Remember to uninstall previous versions of LAM before installing the 5000.1 release.)

Basics of Installing a License File

You can install LAM on either a client machine, or install LAM as a license server. Refer to the LAM Guide—Linux, Solaris, and Windows (LAM.pdf) for complete details, but the basics are outlined below.

LAM Client

1. When you are installing Engineer’s Desktop™ software applications, select Utility (client) when prompted for the type of LAM install. Continue installing Engineer’s Desktop software. The install embeds the client executables for LAM on the machine.

2. Obtain a license file from Landmark. By default the license should be named License.dat.

3. Place the license in a directory pointed to by the environment variable LM_LICENSE_FILE.

4. Test the operation of the client by starting one of the Drilling applications. If a license checkout error occurs, run lmdiag to help diagnose the problem.

5. Client LAM is now set up.

LAM Server

1. When you are installing Engineer’s Desktop software, select Server when prompted for the type of LAM install. Continue installing Engineer’s Desktop. The install embeds the server executables for LAM on the machine.

2. Obtain a license file from Landmark. By default the license should be named License.dat.

Licensing Drilling & Completions applications via TSORDERS

When licensing Landmark applications via the Halliburton “Halworld” site, TSORDERS, it is important to ensure that when the Drilling Applications option is chosen from the Drilling section, the EDM™ database option is also chosen from the IMI section. This is because the Drilling Applications option does not include an EDM™ database licence and thus none of the newly licensed applications will work when you try to run them unless an EDM™ database licence has previously been added to the license file.

5000.1 of 41 June 2008


3. Place the license in a directory pointed to by the environment variable LM_LICENSE_FILE. Note: When using this environment variable to point to LAM servers on different machines, make sure that the 2003 LAM server is listed first.)

4. Test the operation of the client by starting one of the Drilling applications on a client machine. If a license checkout error occurs, run lmdiag to help diagnose the problem.

5. LAM Server is now set up.

Bitlock Licensing

IMPORTANT! If you are using a FLEXnet Publisher 5000 dongle (bitlock), you must install 5000 LAM (FLEXnet Publisher 11.4) on the standalone/client machine.

Install Bitlock Licensing on Windows XP, Windows 2003 Server, or Windows Vista

To install FLEXnet Publisher 11.4 for USB bitlocks on Windows Vista:

1. Insert the USB bitlock dongle into a USB port on your system.

2. Go to your installed \LAM\FLEXID folder, and run FLEXId_Dongle_Driver_Installer.exe to install the bitlock driver.

3. In the Welcome to the InstallShield Wizard for Macrovision FLEXid Drivers screen, click Next.

4. In the Select Features screen, select FLEXid 6/7, 8, and 9 (all 3) and click Next.

5. In the Ready to Install the Program screen, click Install.

6. In the InstallShield Wizard Complete screen, click Yes to restart your computer, then click Finish.

7. To request a bitlock license, make sure your USB bitlock dongle is inserted into a USB port on your system, and run Start > Programs > LAM 5000 >lmtools. Select System Settings tab; provide the value you see in the FLEXID field.

5000.1 of 41 June 2008


Database Upgrade (SQL Server 2005, SQL Server 2005 Express, and Oracle)Refer to the “Upgrading the Database” section of the Engineer’s Desktop 5000.1 Drilling Summary Level Release Notes for information on upgrading your EDM™ database to the 5000.1 version.

You must upgrade your existing EDM database(s) BEFORE using 5000.1

You must upgrade versions of your database(s) created with earlier versions of the software before running the 5000.1 software.

5000.1 of 41 June 2008


Enhancements and New FunctionalityThe 5000.1 release of iWellFile™ software supports the Microsoft Vista operating system, has new LAM (FLEXnet Publisher) licensing and contains some critical bug fixes.In addition, the following enhancements were added to the iWellFile software 5000.1 release.

The primary focus of this release has been to enhance the user experience and to add more data entry features. This has been accomplished through the addition of a number of features including:

• Initialize Wells• Build Well Filters• Customize Charts• Print all cached Reports• Easier maintenance Customizations

— maintain Landmark and Custom folder for configuration files— configure Well Operations tab report links

5000.1 of 41 June 2008


Well Initialization

The Well Initialization page provides users with the ability to create and initialize Wells in the EDM™ database. This page is accessed from the link in the application toolbar. The link is only available to users who have been granted access to iWellFile.Well.Edit token.

Figure 1: Well Initialization Link

The Well Initialization page contains a number of fields used to define the Well. Once all the data has been entered, the user clicks OK and the Well and associated data is created in the EDM database.

During the initialization of a Well the following actions are performed by the application depending on the data entered for the Well:

• select the Company and Project• create a new Site and define the Site's Tight Group or select an existing Site• create and define a Well• define the Well Location • create the Well Datum • create the Wellbore or Sidetrack• create the Event• create a new Cost Estimate and AFE report or• associate the Event to a new or existing Cost Estimate & AFE report• create a Rig Operation• associate the Event to a Rig Operation

5000.1 of 41 June 2008


Figure 2: Well Initialization Page

5000.1 of 41 June 2008


Templates

Well Initialization templates can be created to speed up the creation of similar Wells. Templates created in iWellFile™ software are available for selection in the toolbar. From the toolbar templates can be created, edited or selected and applied.

Figure 3: Well Initialization Selection buttons

Well Initialization templates can only be created or edited by users who have been granted access to the iWellFile.Template.Edit token.

Users create a template and supply values for many data fields. When a Well is initialized using the template, the values entered in the template are automatically populated based on the template definition.

Customize the Well Initialization Page

The Well Initialization page can also be configured to customize the fields appearing in the vari-ous sections of the Well Initialization page. Each section is customized in the following files: Event_Details.xml, Location_Details.xml, Well_Details.xml and WellBore_Details.xml. These configuration files are located on the web server in the iWellFile software installation directory Well Initialization folder (e.g., C:\Inetpub\wwwroot\iWellFile_5000.1.0\config\Landmark\Well Initialization).The Landmark folder stores the default settings shipped with the application. When customizing the sections of the Well Initialization page, be sure to store the customized version of the XML files in the Custom folder (i.e., Config\Custom\Well Initialization).

Instructions for editing these files are contained within the file.

Well Filters

iWellFile™ software allows the use of filters to restrict the data displayed in the application. Filter queries can now be created directly in the application. Filters are selected, uploaded and created from the application toolbar. Use the Create Well Filters ( ) button to create Well Filter queries.

Select

Create

Edit

Apply

5000.1 of 41 June 2008


Figure 4: Well Filter buttons

Filter queries can be saved as “public” or “user”. Public queries are available to all iWellFile™ software users. Public filter queries are saved on the iWellFile server in the <install directory>\filters folder. (e.g., C:\Inetpub\wwwroot\iWellFile_5000.1.0\filters). User queries are only available to the user who created the query. These query files are saved on the iWellFile server in the <install directory>\filters\<user name> folder. (e.g., C:\Inetpub\wwwroot\iWellFile_5000.1.0\filters\jsmith).

Figure 5: Well Filter Creation Window

Custom Configuration Folders

Starting in release 5000.1.0 some configuration files ship in two folders.

• Landmark - The Landmark folder contains the default configuration of the application.

• Custom - The Custom folder contains configurations that are customized by administrators.

CreateUpload

5000.1 of 41 June 2008


These folders are located in the <install directroy>\config folder.

Configurations made in the Custom folder override configurations made in the Landmark folder. Future installs of iWellFile™ software will not overwrite configurations made to files located in the Custom folder.

The following configuration options take advantage of the Landmark and Custom folders:

• Charts• Key Performance Indicators• Well Initialization• Log File Locations • Production Plots• Report Customization• Report Icon Mapping• Well Operations Display Selector

Custom Charts

iWellFile software now allows administrators to customize the configuration of charts appearing on the Dashboard, Multiple Wells and Single Well pages. Charts are customized in the ChartsConfig.xml configuration file located on the web server in the iWellFile software installation directory Charts folder (e.g., C:\Inetpub\wwwroot\iWellFile_5000.1.0\config\Landmark\Charts).

The Landmark folder stores the default settings shipped with the application. When customizing Charts, be sure to store the customized version of the ChartsConfig.xml in the Custom folder (i.e., Config\Custom\Charts).

The XML file defines the following attributes of charts.

• Size (e.g. height, width etc.)• Style (e.g. Line, Bar etc)• SQL that pulls the data.• Column name that should be plotted against X axis.• Column name(s) that should be plotted against Y axis. More than one column can be chosen.• Support of 2Y axis. • DataSeries column name. Also provided is the facility to form the groups for unique value of

dataseries column. Only one Dataseries column can be defined.• Choice of Colors to be used in plotting charts.• Chart Title Name.• Axis Label Name (can also defined as a Macro, to get the value at run time)

Instructions for editing the ChartsConfig.xml file is contained within the file.

5000.1 of 41 June 2008


Print All Cached Reports

The Report page now allows users to print all reports that currently reside in the cache. Cached reports are noted with the following symbol: . This allows an end user to quickly print all of the reports for a given day or a given Well; or allow them to easily email an entire Well’s reports to a partner or other interested party.

The Print All... button prints all selected Cached reports as one .PDF file. The Print All button is disabled until the Cached reports option is selected.

Figure 6: Report page Search, Print All button

Well Operations Tab Report Links

iWellFile™ software now allows administrators to configure Daily Drilling Report links and Daily Cost Report links displayed in the Well Operations tabs. These links are configured in the ReportCustomization.xml file located on the web server in the iWellFile software installation directory "config" folder (e.g., C:\Inetpub\wwwroot\iWellFile\config\Landmark).

The Landmark folder stores the default settings shipped with the application. When customizing report links, be sure to store the customized version of the ReportCustomization.xml in the Config\Custom folder.

Instructions for editing the ReportCustomization.xml file is contained within the file.

5000.1 of 41 June 2008


Problems FixedThe following problems were either fixed or have workarounds for the 5000.1 release of iWellFile™ software.

Defect ID Subject Comp Level 1 Comp Level 2

614776 User settings are not saved for: WellBore Schematic, DA Query and Profile WallPlots

User Settings

629921 Need to provide Report Shading On/Off option in iWellFile same as other EDT apps

Report Generation

624093 eliminate long filenames for PROFILE WallPlots PROFILE Schematics

629516 Filter mechanism should provide better support for EDM data hierarchy

Well / Event Selection

721983 Two quick improvement requirements for using iWellfile: 1. Easy Cut & Paste of Well schematics in iWellfile to Word, PowerPoint etc. 2. Easy click & print of Well schematics.

PROFILE Schematics

721423 Context sensitive help icon (?) is not showing up Help Context Sensitive Help

720965 No information in EDMPublishingOutputReportLog.xml file to determine whether iWellFile or EPS generated cached output report

Single Well Daily Reports

727357 Limit the access to Upload buttons to some specific group of user using the security schema provided by OpenWells

Options Custom Filter Selection

727354 Well Filter and Profile Template Upload store location Other

782411 Strange looking plot in iWellFile for Depth vs Days (DOL) Single Well Common Well Graphs

753643 Input parameter not showing when running a Analysis Query.

Analysis Queries

737874 Data Analyzer Date Parameters do not support iWellFile short date format

Analysis Queries

732099 iWellFile to show Sum,Avg Group Operation captions in Table and Graph format and not the Data Element Name (misleading)

Analysis Queries

755508 IWellfile is using a different location to pick the values for Country and State on its default filters

Customization Other

769820 Company Logo's set in OpenWells not coming through in iWellfile

Customization

5000.1 of 41 June 2008


754640 Customer Request Enhancement - Report Link Changes Administration

752468 Add section to Troubleshooting page in online help describing iWellFile.log errors logged when KPIs are not customised for the appropriate database server type.

Help iWellFile Help

755297 Error on Count of DM_DAILY.date_report. If date field in the query is manipulated in anyway like with Group By, Count, or Derived Element , you will get a error.

Analysis Queries

783266 Print Button - Well Ops Summary View brings up blank pages in current view

Dashboard Well Operations

768128 Request that the Single Well Screen in iWellFile list the appropriate Daily Report in the Daily Tab based on the Event Type selected.

Customization iWellFile Configuration

777255 iWellfile Graph Legends are unreadable. Dashboard view - Measured Depth vs Days, Rig Activity, Operations graphs have legends that overlay the graphs. This makes them very hard to read. Please find a better way to display the legends

Dashboard Common Well Graphs

777351 User wants the ability to re-order drop down list on Dashboard


760656 Rearchitect the single well page mechanism of displaying daily and summary report links to improve performance.

Single Well Daily Reports

764650 Event Viewer Log and Report Builder Log cannot be viewed.

Administration

784716 MD vs Days graph on the single well tab of iWellfile is not using data recorded

Single Well Common Well Graphs

757400 IWellFile Should be compatible to support web farming i.e. support for sessions in state server.

Other

757286 Enable the Cached facility for the Wallplot in single well page.

Single Well Wall Plot

772135 Lesson area should only be filled by managers. Lessons Learned

769898 Install Guide needs clearer description of database preparations needed for iWellFile

Documentation Installation Guide

772103 Schematic generated for wrong date when using European date format (dd-MM-yy).

Single Well Schematic

772110 Compass log file in Admin page should be versioned correctly

Administration


5000.1 of 41 June 2008


772429 DA query parameter values are not showing properly in iWellFile. It is showing the parameters for wrong fields.

Analysis Queries

772504 iWellFile logs out when the Refresh toolbar button is used Other

774928 iWellFile - Reports Tab. Request the ability to enter a specific search criteria, similar to the find dialog in the OpenWells explorer tree.

Reports Tab

773227 Launch in Context is not working based on date in Single Well page.

Single Well Other

770662 Licensing - EDT Licensing does not take advantage of the functionality that will warn users that their license is set to expire in x days

Licensing

769901 Need to correct EDM Tablespace name referenced in Install Guide


769899 Date column in Reports List needs to be wider Reports Tab

770155 Install Documentation states that Oracle KPIs are commented, out. With new version it is the MSDE KPIs that are commented out


772129 Incident Description should be in a bigger text box area Lessons Learned

772127 Under Lessons part, Incident area, there is no place to put Incident Time

Lessons Learned

782016 Lesson Search result is not showing proper records based on search condition while searching Lessons in Lesson learned page when using Start and End Dates with using SQL Server Data Base.

Lessons Learned

781923 Analysis Query modify parameter Default value is not displaying in modify parameter window, It's happening only for the picklist parameters.

Analysis Queries

777556 Need to support Customization for Well Initialization, Reportcustimzation, chart service.

Customization User Customization

781312 Reports page should display the Cached reports with considering unit system also.

Reports Tab

757326 Inconsistency in unit sets in graphs between PROFILE and iWellFile.

Single Well


5000.1 of 41 June 2008


Known ProblemsThe following are known problems for the iWellFile™ software 5000.1 release.


620563 Need configurable login for intranet and extranet users Security

624298 Need to integrate Well selector/filters to Data Analyzer query parameters

Data Analyzer Queries

629914 Need to provide integration point for customers to define custom links to other sites and/or documents.

Well / Event Selection

629917 P10/P90 Cost estimate available from iWellFile Install

630302 add more integration with Production and Economics applications

Others

631490 On some wells, the Profile Schematic just has a few numbers down the left side.

PROFILE Schematics

698809 IWellfile Schematic output types should include pdf PROFILE Schematics

700698 Extend iWellFile to only support output of approved reports

Report Selection

700933 Need PROFILE WPC File Page Size Output Menu to be customizable

PROFILE Schematics

731495 Need multiple template support in iWellfile PROFILE Schematics

731650 Well Operations Section. Days Ahead (50/50) (days) field not populating

Others

732003 Enhancement to include a Print Wizard to batch print many reports.

Report Generation

732922 Would like to generate multiple WPC outputs to a single output file

Single Well Wall Plot

754357 Clients would like access to content in Data Receiver Success, Failure & Log folders

Administration

763119 Would like ability to export and source EDM data transfer file from within iWellFile

Other

771598 Need Compass plug-in to log Command Line calls to enable problems with the plug-in to be more easily troubleshooted.

Single Well Wellpath Plots

772081 Need different iWellFile behavior for different user roles Administration

772133 Depth info should be put in an area next to time assessment Lessons Learned

5000.1 of 41 June 2008


774169 Hole Section information not being shown for certain Start Dates in the Well Operations displays


776838 ENHANCEMENT - Contactor Name should be displayed on ea line of Rig Operations

Rig Operations

777050 The Analysis tab option Modify Parameters is not working when a query has a conditional parameter with picklist selection.

Analysis Queries

778055 Well Filter needs to contain an Operator as Not Like which will help for searching wells with Not like <value>

Other

780245 iWellFile is displaying the Cache reports of all Active DSNs.

Reports Tab

781753 single well page-->attachment tab--> Explorer view-->Well Name is not displaying as it selected in MyiWellFile options window Well Name Picklist.

Single Well Attachment

782769 Need Ability to Change Mouse-over text for calendar icons Single Well

782773 Analysis Panel needs a 1x1 display Analysis


5000.1 of 41 June 2008


Contacting Support

Landmark operates Technical Assistance Centers (TACs) in Australia, the United Kingdom, and the United States. Additional support is also provided through local support offices around the world. Local support office information is listed below. If problems cannot be resolved at the dis-trict level, our escalation team is called to resolve your incidents quickly.

Support information is always available on the Landmark Graphics Support internet page located at: http://css.lgc.com/CustomerSupport/CustomerSupportHome.jsp.

Technical Assistance Centers

North America7:30 am - 5:30 pm Central Standard TimeMonday - Friday, excluding holidays

713-839-2200 (Houston, TX, USA)Toll Free 1-877-435-7542(1-877-HELP-LGC)Fax: 713-839-2168 (Houston, TX)Fax: 907-275-2655 (Anchorage, AK)Fax: 303-796-0807 (Denver, CO)Fax: 403-262-1929 (Calgary, Canada)

Email: [email protected]

Latin America (Spanish, Portuguese, English)7:00 am - 5:00 pm Central Standard TimeLocal normal business hours

1-713-839-3405 (Houston,TX,USA)Fax: 713-839-3646Email: [email protected]

Toll Free from:Argentina: 0800-800-5263Brazil: 0800-891-0837Chile: 800-201-898Colombia: 01800-915-4743Mexico: 001-888-438-1296Peru: 0800-51634Trinidad: 1-888-438-1296 Venezuela: 0-800-526-3627

Toll Free from local area:Ecuador (Quito) (02)226-1908

Europe, Africa, Middle East8:00 am - 5:30 pm Local TimeMonday - Friday, excluding holidays

44-1372-868686 (Leatherhead, UK) Fax: 44-1372-868601 (Leatherhead, UK)Fax: 44-1224-723260 (Aberdeen, UK)Email: [email protected]

http://css.lgc.com/CustomerSupport/CustomerSupportHome.jsp






mailto:[email protected]

mailto: [email protected]



5000.1 of 41 June 2008


Asia, Pacific 8:00 am - 5:00 pm Local Time Monday-Friday, excluding holidays

61-8-9481-4488 (Perth, Australia) Toll-free 1-800-448-488Fax: 61-8-9481-1580Email:[email protected]

Toll-Free from: China: 10-800-6100-253 Indonesia: 001-803-61284 Japan: 00531-61-0021 Malaysia 1800-803-687 New Zealand 0800-400-555 South Korea 00308-61-0046 Taiwan 0080-161-1350 Thailand 001-800-611-2784

Toll Free from local area:Vietnam: 84-8-9191901India: 91-11-622-1885 (c/o Samit Enterprises)

District Support Offices

Algeria (Algiers)8:30 am - 4:30 pm Local TimeSaturday - Wednesday excluding holidays

21-337-7239Email: [email protected]

Angola (Luanda)8:00 am - 5:00 pm Local TimeMonday - Friday, excluding holidays

213 2137 7239Email: [email protected]

Argentina (Buenos Aires)9:00 am - 6:00 pmLocal time

54-11-4312-8411Toll Free 0800-800-5263Fax: 54-11-4311-9566Email: [email protected]

Australia (Perth) 8:00 am - 5:00 pm Local TimeMonday - Friday, excluding holidays


Brazil (Rio de Janeiro)8:00 am - 5:30 pmLocal Time

55-21-3974-4000 orToll Free 0800-891-0837Fax: 55-21-3974-4002Email: [email protected]

Brunei (Bandar Seri Bagawan)8:30 am - 5:30 pm Local TimeMonday - Friday, excluding holidays

67-3-233-5319Email: [email protected]








5000.1 of 41 June 2008


Canada (Calgary)7:30 am - 5:30 pm Central Standard TimeMonday-Friday, excluding holidays

Toll Free 1-877-435-7542(1-877-HELP-LGC)Fax: 403-262-1929 (Calgary, Canada)Fax: 713-830-2168 (Houston, TX)Email: [email protected]

Chile (TAO TAC, Houston, Texas)Local normal business hours

Toll Free 800-201-898Fax: 1-713-839-3646Email: [email protected]

Colombia (Bogota) 8:00 am - 5:00 pmLocal Time

57-1-326-400057-1-326-6710Toll Free 01800-915-4743Fax: 57-1-326-6717Email: [email protected]

Ecuador (Quito)8:00 am - 5:00 pmLocal Time

59-32-226-1844 Toll Free from Quito (02)226-1908Fax: 59-32-226-2590Email: [email protected]

Egypt (Cairo) 8:00 am - 4:00 pm Local TimeSaturday - Wednesday, excluding holidays

20-2-759-1717(ask for Landmark Technical Support)Email: [email protected]

India (New Delhi) 9:00 am - 5:30 pm Local TimeLocal Business Days, excluding holidays

91-11-622-1885(c/o Samit Enterprises)Fax: 91-11-647-9246Email: [email protected]

Indonesia (Jakarta) 7:30 am - 4:30 pm Local TimeMonday - Friday, excluding holidays

62-21-3003-9039 orToll Free 001-803-61284Fax: 62-21-3003-9088Email: [email protected]

Japan8:00 am - 5:00 pm Local TimeMonday - Friday, excluding holidays

Toll Free 00531-61-0021Email: [email protected]

Malaysia (Kuala Lumpur)8:30 am - 5:30 pm Local TimeMonday - Friday, excluding holidays

603-2164-1121 or Toll Free 1-800-803-687Fax: 603-2164-1135Email: [email protected]









5000.1 of 41 June 2008


Mexico (Reynosa) 8:00 am - 6:00 pmLocal Time

52-555-208-353352-555-208-3868Toll Free 001-888-438-1296Local Office Fax: 52-555-514-7646Email: [email protected]

New Zealand (New Plymouth)8:00 am - 5:00 pm Local TimeMonday - Friday, excluding holidays


Nigeria (Lagos) 8:00 am - 5:00 pm Local TimeMonday - Friday, excluding holidays

234-1-461-0780(ask for Landmark Technical Support)Fax: 234-1-262-0769Email: [email protected]

People's Republic of China (Beijing) 9:00 am - 5:30 pm Local TimeMonday - Friday, excluding holidays

86-10-8486-4501Toll Free 10-800-6100-253 or10-800-810-0209Fax: 86-10-8486-4819Email [email protected] or [email protected]

Peru (Lima) Local normal business hours

Toll Free 0800-51634Fax: 001-713-839-9646Email: [email protected]

Russia (Moscow) 7:00 am - 5:00 pm Local TimeLocal Business Days, excluding holidays

7-495-960-29267-495-960-2927(ask for Landmark Technical Support)Fax: 7-095-755-8301Email: [email protected]

South Korea8:00 am - 5:00 pm Local TimeMonday - Friday, excluding holidays


Taiwan 8:30 am - 5:30 pm Local TimeMonday-Friday, excluding holidays


Thailand (Bangkok)8:00 am - 5:00pm Local TimeMonday - Friday, excluding holidays

66-2-278-8100Toll Free 001-800-611-2784Fax: 66-2-278-8199Email: [email protected]











5000.1 of 41 June 2008


Helpful internet links are shown below.

Trinidad & Tobago (TAO TAC, Houston, TX)7:00 am - 5:00 pm Central Standard Time(Houston, TX)Local normal business hours

Toll Free: 1-888-438-1296Fax: 1-713-839-3646Email: [email protected]

United Arab Emirates (Dubai)7:00 am - 5:00 pm Local TimeLocal Business Days, excluding holidays

+971-4-3036446(ask for Landmark Technical Support)Fax: +971-4-3315837Email: [email protected][email protected]

United Kingdom8:00 am - 5:30 pm Local TimeMonday - Friday, excluding holidays

44-1372-868686 (Leatherhead)Fax: 44-1372-868601 (Leatherhead)Fax 44-1224-723260 (Aberdeen)Email: [email protected]

United States (Anchorage)7:30 am - 5:30 pm Central Standard TimeMonday - Friday, excluding holidays

Toll Free 1-877-435-7542(1-877-HELP-LGC)Fax: 907-275-2655Email: [email protected]

United States (Denver)7:30 am - 5:30 pm Central Standard TimeMonday - Friday, excluding holidays

Toll Free 1-877-435-7542(1-877-HELP-LGC)Fax: 303-796-0807Email: [email protected]

United States (Houston)7:30 am - 5:30 pm Central Standard TimeMonday - Friday, excluding holidays

713-839-2200Toll Free 1-877-435-7542(1-877-HELP-LGC)Fax: 713-839-2168Email: [email protected]

Venezuela (Caracas) 8:00 am - 5:00 pmLocal Time

58-212-953-0774Toll Free 0-800-526-3627Fax: 58-212-952-3845Email: [email protected]

Vietnam (Ho Chi Minh City)8:00 am - 5:00 pm Local TimeMonday - Friday, excluding holidays

84-8-910-1901Fax: 84-8-910-1902Email: [email protected]

Name Website Address

Landmark Graphics home page http://www.lgc.com

Landmark Graphics FTP Site ftp://ftp.lgc.com

Oracle home page http://www.oracle.com













http://www.lgc.com

ftp://ftp.lgc.com

http://www.oracle.com

5000.1 of 41 June 2008


FLEXlm license management software http://www.macrovision.com

Microsoft SQL Server 2005 home page http://www.microsoft.com/sql/default.asp

Adobe Acrobat Reader http://www.adobe.com

Microsoft SQL Server 2005 Express http://www.microsoft.com/sql/editions/express/default.mspx

Name Website Address

http://www.macrovision.com/support/by_category/Software_Licensing.shtml

http://www.microsoft.com/sql/default.asp

http://www.adobe.com

5000.1 of 41 June 2008


© 2008 Landmark Graphics CorporationAll Rights Reserved Worldwide

This publication has been provided pursuant to an agreement containing restrictions on its use. The publication is also protected by Federal copyright law. No part of this publication may be copied or distributed, transmitted, transcribed, stored in a retrieval system, or translated into any human or computer language, in any form or by any means, electronic, magnetic, manual, or otherwise, or

disclosed to third parties without the express written permission of:

Landmark Graphics Corporation2101 CityWest Blvd, Building 2, Houston, Texas 77042-3021, USA

P.O. Box 42806, Houston, Texas 77242, USAPhone: 713-839-2000 FAX: 713-839-2401Web: www.lgc.com

Trademark Notice

3D Drill View, 3D Drill View KM, 3DFS, 3D Surveillance, 3DView, Active Field Surveillance, Active Reservoir Surveillance, ADC, Advanced Data Transfer, ARIES, ARIES DecisionSuite, Asset Decision Solution, Asset Development Center, Asset Journal, AssetLink, AssetLink Advisor, AssetLink Director, AssetLink Observer, Asset Performance, AssetPlanner, AssetSolver, AssetSolver Online, AssetView, BLITZPAK, CasingSeat, COMPASS, Corporate Data Archiver, Corporate Data Store, Data Analyzer, DataManager, DataStar, DBPlot, DecisionSpace, DecisionsSpace 3D Drill View KM, DecisionSpace AssetLink, DecisionSpace AssetPlanner, DecisionSpace AssetSolver, DecisionSpace AssetView 2D, DecisionSpace AssetView 3D, DecisionSpace Atomic Meshing, DecisionSpace Decision Management Systems(DMS), DecisionSpace for Production, DecisionSpace Nexus, DecisionSpace PowerGrid, DecisionSpace PowerModel, DecisionSpace PrecisionTarget, DecisionSpace Reservoir, DecisionSpace TracPlanner, DecisionSpace Well Seismic Fusion, DecisionSpace WellSolver, DecisionSuite, DepthTeam, DepthTeam Explorer, DepthTeam Express, DepthTeam Extreme, DepthTeam Interpreter, Desktop Navigator, DESKTOP-PVT, DESKTOP-VIP, DEX, DIMS, Discovery, Discovery Asset, Discovery PowerStation, DMS, Drillability Suite, Drilling Desktop, DrillModel, Drill-to-the-Earth Model, DSS, Dynamic Reservoir Management, Dynamic Surveillance System, EarthCube, EDM, EDT, eLandmark, Engineer’s Data Model, Engineer's Desktop, Engineer’s Link, ESP, Event Similarity Prediction, Executive Assistant, ezFault, ezSurface, ezTracker, FastTrack, FG+, FieldPlan, Field Scenario Planner, FZAP!, GeoAtlas, GeoDataLoad, GeoGraphix, GeoGraphix Exploration System, GeoLink, GeoProbe, GeoProbe GF DataServer, GES, GESXplorer, GMAplus, GMI Imager, GRIDGENR, Handheld Field Operator, HHFO, I2 Enterprise, iDIMS, IsoMap, iWellFile, Landmark, Landmark Decision Center, Landmark & Design, Landmark Logo and Design, Landscape, Lattix, LeaseMap, LMK Resources, LogEdit, LogM, LogPrep, Magic Earth, MagicDesk, Make Great Decisions, MathPack, MIMIC, MIMIC+, Model Builder, MyLandmark, Nexus, Object MP, OpenBooks, Open Explorer, OpenJournal, OpenSGM, OpenVision, OpenWells, OpenWire, OpenWorks, OpenWorks Development Kit, OpenWorks Well File, OpenWorks Production, PAL, Parallel-VIP, PetroBank, PetroBank Master Data Store, PetroWorks, PetroWorks Asset, PetroWorks Pro, PetroWorks ULTRA, PlotView, Point Gridding Plus, Pointing Dispatcher, PostStack, PostStack ESP, PostStack Family, PowerCalculator, PowerExplorer, PowerExplorer Connect, PowerGrid, PowerHub, Power Interpretation, PowerJournal, PowerModel, PowerView, PrecisionTarget, Presgraf, PRIZM, Production Asset Manager, PROFILE, Project Administrator, ProMAGIC, ProMAGIC Connect, ProMAGIC Server, ProMAX, ProMAX 2D, ProMAX 3D, ProMAX 3DPSDM, ProMax 4D, ProMax Family, ProMAX MVA, ProMAX VSP, pSTAx, Query Builder, Quick, Quick+, QUICKDIF, QuickWell, QuickWell+, QUIKDIG, QUIKRAY, QUIKSHOT, QUIKVSP, RAVE, RAYMAP, RAYMAP+, Real Freedom, Real Time Asset Management Center, Real Time Decision Center, Real Time Operations Center, Real Time Production Surveillance, Real Time Surveillance, Real-Time View, Reference Data Manager, RESev, ResMap, RightTime, RTOC, SCAN, SeisCube, SeisMap, SeisModel, SeisSpace, SeisVision, SeisWell, SeisWorks, SeisWorks 2D, SeisWorks 3D, SeisWorks PowerCalculator, SeisWorks PowerJournal, SeisWorks PowerView, SeisXchange, Semblance Computation and Analysis, Sierra Family, SigmaView, SimConnect, SimConvert, SimDataStudio,SimResults, SimResults+, SimResults+3D, SIVA, SIVA+, smartSECTION, Spatializer, SpecDecomp, StrataAmp, StrataMap, StrataModel, StrataSim, StratWorks, StrataWorks 3D, StreamCalc, StressCheck, STRUCT, Structure Cube, Surf & Connect, SynTool, SystemStart, SystemStart for Clients, SystemStart for Servers, SystemStart for Storage, Tanks & Tubes, TDQ, Team Workspace, TERAS, The Engineer’s Desktop, Total Drilling Performance, TOW/cs, TOW/cs Revenue Interface, TracPlanner, Trend Form Gridding, Turbo Synthetics, VESPA, VESPA+, VIP, VIP-COMP, VIP-CORE, VIPDataStudio, VIP-DUAL, VIP-ENCORE, VIP-EXECUTIVE, VIP-Local Grid Refinement, VIP-THERM, WavX, Web Editor, Wellbase, Wellbore Planner, Wellbore Planner Connect, WELLCAT, WELLPLAN, Well Seismic Fusion, WellSolver, WellXchange, WOW, Xsection, You're in Control. Experience the difference, ZAP!, and Z-MAP Plus are trademarks, registered trademarks or service marks of Landmark Graphics Corporation.

All other trademarks, service marks and product or service names are the trademarks or names of their respective owners.

NoteThe information contained in this document is subject to change without notice and should not be construed as a commitment by Landmark Graphics Corporation. Landmark Graphics Corporation assumes no responsibility for any error that may appear in this manual. Some states or jurisdictions do not allow disclaimer of expressed or implied warranties in certain transactions; therefore, this statement may not apply to you.

5000.1 of 41 June 2008


Landmark acknowledges that certain third party code has been bundled with, or embedded in, Landmark’s software. The licensors of this third party code, and the terms and conditions of their respective licenses,

may be found at the following location:

[Installdir]\Help\Third_Party.pdf

i well file release notes

Documents