antidumping duty petition volume xv …. xv...public version pursuant to 19 c.f.r. $...
TRANSCRIPT
PUBLIC VERSION
DOC Investigation No. A-856-001 ITC Investigation Nos. 701-TA-___-___ and 731-TA-___-___ Total No. of Pages: 108 AD/CVD Operations Petitioners’ Business Proprietary Information for Which Proprietary Treatment Has Been Requested Deleted at Exhibits AD-SI-1 (Atts. 1, 2, 5, 7), AD-SI-2, and AD-SI-3 PUBLIC VERSION
BEFORE THE INTERNATIONAL TRADE ADMINISTRATION OF THE
U.S. DEPARTMENT OF COMMERCE AND THE
U.S. INTERNATIONAL TRADE COMMISSION
ANTIDUMPING DUTY PETITION VOLUME XV SLOVENIA
COMMON ALLOY ALUMINUM SHEET FROM BAHRAIN, BRAZIL, CROATIA, EGYPT, GERMANY, GREECE, INDIA, INDONESIA, ITALY, KOREA, OMAN, ROMANIA, SERBIA, SLOVENIA, SOUTH AFRICA, SPAIN, TAIWAN, AND
TURKEY
PETITIONERS: THE ALUMINUM ASSOCIATION COMMON ALLOY ALUMINUM SHEET TRADE
ENFORCEMENT WORKING GROUP AND ITS INDIVIDUAL MEMBERS
W. BRAD HUDGENS WILLIAM H. CROW II EMILY R. MALOOF NEREUS JOUBERT VLADIMIR VARBANOV
GEORGETOWN ECONOMIC
SERVICES LLC 3050 K Street, N.W., Suite 400 Washington, D.C. 20007 (202) 342-8400
JOHN M. HERRMANN PAUL C. ROSENTHAL KATHLEEN W. CANNON R. ALAN LUBERDA BROOKE M. RINGEL
DAVID C. SMITH GRACE W. KIM MELISSA M. BREWER JOSHUA R. MOREY MATTHEW G. PEREIRA
KELLEY DRYE & WARREN LLP 3050 K Street, N.W., Suite 400 Washington, D.C. 20007 (202) 342-8400
Counsel to Petitioners
March 9, 2020
PUBLIC VERSION
Table of Contents
COMMON ALLOY ALUMINUM SHEET FROM SLOVENIA IS BEINGSOLD OR OFFERED FOR SALE AT LESS THAN FAIR V4LU8...........,
A. Introduction..........
Page
I
1
B.
C.
Producers in Slovema
Export Price or Constructed Export Price..'.'..."..
1. Sources of U.S. Pricing........
2. Adjustments to U.S. Pricing.
D. Normal Value
1. Normal Value Based on Home Market Prices
E. Antidumping Duty Margin Calculations
il. CONCLUSION AND REQUEST FOR INVESTIGATION .
,2
,2
,2
.3
a
.4
.4
1
PUBLIC VERSION
I. COMMON ALLOY ALUMINUM SHEET FROM SLOVENIA IS BEING SOLD OROFFERE,D FOR SALE AT ,E,SS THAN F'AIR VAI,IIE
A. Introduction
This Petition volume contains information regarding sales at less than fair value in the
United States of common alloy aluminum sheet ("CAAS") from Slovenia. This volume presents
information reasonably available to Petitioners demonstrating that CAAS from Slovenia is being
sold in the United States at less than fair value within the meaning of section 731 of the Tariff Act
of 1930, as amended ("the Act"). See 19 U.S.C. $ 1673. As discussed below, application of the
standard antidumping methodology used by the U.S. Department of Commerce ("the
Department") demonstrates that producers and exporters in Slovenia have sold, or offered for sale,
CAAS in the United States for less than fair value.
The general and injury information required by section 35L202 of the Department's
regulations, 19 C.F.R. $ 35I.202, and section 207.11 of the regulations of the U.S. International
Trade Commission (.'ITC" or "the Commission"), 19 C.F,R. ç 207.11, can be found in Volume I
of this Petition. Based on information reasonably available to Petitioners contained in this volume,
the Department should initiate an investigation of sales at less than fair value of CAAS from
Slovenia and should impose antidumping duties in an amount that is equal to the amount by which
the normal value exceeds the export price or constructed export price.
B. Producers Slovenia
To the best of Petitioners' knowledge, CAAS is produced in Slovenia and exported to the
United States by the following company during the proposed period of investigation ("POI"):
. Impol 2000, d.d. and its subsidiary companies ("Impol Group") including Impold.o.o. and Impol FT, d.o.o.
PUBLIC VERSION
Pursuant to 19 C.F.R. $ 351.202(b)(7)(Ð(A), the full names and addresses of all known
producers and exporters of CAAS in all of the subject countries (including Slovenia) is provided
in Volume I. See Petition Volume I, Exhibit GEN-6 (foreign producer list) and Exhibit GEN-
15 (information on foreign producers). Although information about the proportion of total exports
to the United States accounted for by each listed company is not reasonably available to Petitioners,
Petitioners believe based on experience in the marketplace that merchandise produced by the
identified company accounts for most or all U.S. imports of CAAS during the proposed POI.I
C. Export Price or Constructed Export Price
Petitioners have reason to believe or suspect that producers in Slovenia are selling CAAS
in the United States at less than fair value, with sales of the subject merchandise occurring either
before or after importation to the United States.
1. Sources of U.S. Pricins
Petitioners calculated U.S. pricing for CAAS from Slovenia based on information
Petitioners obtained from confidential sources concerning sales or offers for sale during the
proposed POL See Exhibit AD-SI-I.
2, Adiustments to U.S. Pricine
Petitioners believe that exporters sell CAAS both directly to end users in the United States,
as well as through trading companies or affiliated sales agents in the United States, including:
. Impol Aluminum Corpo AA Metals Inc.o LevellingCorporation. Empire Resources Inc.¡ Ta Chen International Inc
' Consistent with the Department's practice, Petitioners have treated the four calendar quarters
prior to the month in which the petition has been filed, January l, 2019 - December 37, 2079, as
the proposed POL
-2-
PUBLIC VERSION
o Ansam Metals
See Petition Volume I, Exhibit GEN-8 (U.S. importer list)
In order to calculate ex-factory pricing for the U.S. sales, pursuant to 19 U.S.C, {i
1677a(c)(2), (19 C.F.R. $$ 24.23(bXlXA) and24.24(a)), Petitioners have deducted from the U.S
pricing, where applicable, the following charges and expenses
ADJUSTMENT SOURCE EXHIBITForeign inland freight Doing Business in Slovenia AD-SI-l,
^tt.4Foreign brokerage and handling Doing Business in Slovenra AD-SI-l, Att.4Intemational freight andlnsurance
MAERSK AD-SI-l' Att.7U,S, merchandise processing andharbor maintenance fees
U.S. Customs Regulations AD-SI-l, Att. 3
U.S, Customs dutiesU.S. Harmonized TariffSchedule AD-Sr-1,Aft. 8
U.S. brokerage and handlingDoing Business in the UnitedStates
AD-SI-l, Att. 6
U.S, inland freightDoing Business in the UnitedStates AD-SI-l, Att. 6
Imputed credit expenses Federal Reserve Bank AD-SI-l' Aft. 9
Mark-up imposed bydistributor/importer
U.S. Producers' Experience AD-SI-l, Att.2
These adjustments and Petitioners' calculation of net export pricing are provided at Exhibit AD-
SI-1.
D. Normal Value
1. Normal Value Based on Home Market Prices
The preferred method for determining the normal value of imported products is to examine
sales or offers for sale of the identical or similar product in the home market of the exporting
country. See 19 C.F.R. $ 3 5 L403. Petitioners were able to obtain pricing information in Slovenia
based on confidential market research. See Exhibit AD-SI-2.
-J-
PUBLIC VERSION
E. Antidumpins Dutv Marsin Calculations
Petitioners deducted the export price or constructed export price from normal value -- using
foreign market pricing as normal value -- to determine the dumping margin for the U.S. sales. This
comparison results in a dumping margin of 30.88 percent, ad valorem. See Exhibit AD-SI-3,
II. CONCI,TISION AND REO ST FOR INVESTIGATION
As demonstrated in this volume, CAAS from Slovenia is being sold in the United States at
less than fair value. Accordingly, Petitioners respectfully request that the Department initiate an
antidumping investigation of CAAS from Slovenia.
-4-
PUBLIC VERSION
EXHIBIT LIST
Export Prices and AdjustmentsAD-SI.1
Aft.1 Net price calculation
Supporting documents for net priceAtt.2
Aft.3 Harbor maintenance and merchandise processing fee
HM movement chargesAtt.4
Transportation distancesArt. 5
Att.6 US movement charges
Ltt.7 Ocean freight and marine insurance
Att. I US import duties
US interest ratesArt. 9
Normal ValueAD-SI.2
AD-SI.3 Antidumping Duty Margin Calculation
EXHIBIT AD-SI.1
Export Prices andAdjustments
Attachment 1
Summary of Export Prices andAdjustments
Ranged Data PUBLIC VERSION
Formula Source Attachment
Date [ ] Declaration 2
Seller [ ] Declaration 2
Form [ Coil ] Declaration 2
Alloy [ ] Declaration 2
Temper [ ] Declaration 2
Gauge [ ] Declaration 2
Width [ ] Declaration 2
Length [ ] Declaration 2
Fabrication (if quoted) $/pound [ ] a Declaration 2
LME (if quoted) $/pound [ ] b LME 2
LME month used [ ]
Price ($/pound) $/pound [ ] c=(a+b)
Sale Type (EP or CEP) EP
Delivery Terms [ ] Declaration 2
Foreign Freight Rate $/pound/km 0.00004 d Doing Business 4
Distance: Factory to Foreign Port km [ ] e Map 5
Foreign Inland Freight $/pound [ 0.01 ] f=d*e
Foreign Brokerage $/pound 0.00000 g Doing Business 4
Ocean Freight $/pound [ ] h Maersk 7
Marine Insurance $/pound [ ] i = c*insurance rate PAF 7
HM/MPF Rate % 0.47% j C.F.R. 3
Harbor Maint./MPF $/pound [ ] k=c-(c/(1+j)
U.S. Duty Rate - Regular Duties % [ ] l HTS 8
U.S. Duty Rate - Section 232 % 10% m HTS 8
U.S. Duty $/pound [ ] n=c-(c/(1+l+m)
Credit Terms days [ ] o Declaration 2
Interest Rate % 5.28% p Federal Reserve 9
Credit Expense $/pound [ ] q = c*o*p/365
U.S. Brokerage $/pound 0.00832 r Doing Business 6
U.S. Freight Rate $/pound/km 0.00004 s Doing Business 6
Distance: U.S. Port to Customer km [ ] t Map 5
U.S. Inland Freight $/pound [ 0.08 ] u=s*t
Distributor / Importer Mark-Up % 4.00% v Declaration 2
Distributor / Importer Mark-Up $/pound [ ] w=c-(c/(1+v))
Ex-Factory Price $/pound [ ] =c-sum(f,g,h,i,k,n,q,r,u,w)
Export Price
Slovenia
Common Alloy Aluminum Sheet
Attachment 2
U.S. Pricing Documentation
PUBLICI VERSION
DECLARATION CONCERNING U.S. PRICINGx'oR coMMON ALLOY ALIIMINUM SHEET FROM CROATIA' SERBIÄ AND
SLOVENIA
I,I l, declare that the following infotmation is true and accurate:
1. Iamthe It
I, I have been employed at my company
for [ ] years and I have worked in the aluminum industry for I J years' My company's
h"aåqu*rtãrs and associated ploduction facilities are at the following locations:
My company sells CAAS t l'
As a regular part of my responsibilities, I I
I in conneotion with the sale of CAAS in the U'S' market'
Pricing for CAAS may be quoted as a single amount or as a fabrication (or "fab")¡smponentplus a-metal oomponLnt that is based on average prioing on the London Metal Exchange
C;ifufg't for a speoified month, suoh as the month 30 days prior to sale or 30 days prior to the
anticipated shipment,
,,
3
4.
5
1
t
ìt
iI
i.,l
lit
ii
)
jq
!t'ì
i,j
It
¡
iil
In the U.S. market, imports of CAAS are usually sold by intermediaries aoting as trading
companies or agents, duch intermediaries may be affiliated with a foreign mill or opel{ing
indeþendently. buring 2019, related intermediaries aotively supporting imports 9f.Q{A_S__onü"Àif àf foräign mitlõ included Impol Aluminum Corp, GARMCO USA Inc,, OARC USA
Inc., and Nov"iír USe. Other intermediaries included suoh oompanies as MT Metal Exchange,
AA Metals, Metal Exchange and Sinobec. Based on my experienoo and knowledge of the
C¿eS *urkut, I estimate- that prices quoted or offered by an affiliated or unaffiliated
int"*uaiury iiclude a mark-up of be¡veen 3 and 5 peroent of total gross price in order to oover
the cost of operations in the United States.
6. onl l, I negotiated with I
normal commercial quantities, for delivery in I
, l, for a potential sale of CAAS, ur
I
t
It
F'1.'BLIC VERSION
7. This contact informed me of an offer for imported CAAS from [ : ] with the following
terms
DatelPeriod of Quote / Offer t I
Foreign Mill t
IAsent/Reseller (if applicable) t IForm fìAllovTemper I
t rlf I
Gause / ThicknessWidthLensth rIF¿b Price (if applicable) rìLME Month (if applicable)LME Prioe (if applicable)Total PriceDelivery TermsDelivery Location
Payment Terms
The oontaot I
I In a subsequent I
cERTIETCATIOJI
This declaration is made in acoordance with 28 U,S.C, $ 1746. I declare under penalty of perjury under
the laws of the United States of America that the foregoing statements are true and oorrect to the best ofmy information and belief.
I
Itt
Dated: February 27,2020
THE BUSINESS PROPRIETARY ATTACHMENT
IS NOT SUSCEPTIBLE TO SUMMARIZATION
AND THEREFORE IS NOT PROVIDED
WITH THIS PUBLIC VERSION
Average LME Aluminium Official prices USS per tonnend conversion to U.S. standard weight)
oFFER (uS$ / roNNE) BtD (uss / tb.) oFrER (Uss / rbCONTRACT BtD (uss / rorurue)
1,845.14 1,845.89 0.8369 0.8373Jan 2019 Cash
0.8439 0.84443-months 1,860.57 1,861.55
1,859.55 0.8432 0.8435Feb 2019 Cash 1,858.90
0.85501,884.13 1,885.05 0.85463-months
0.8489 0.84921,871.52 1,872.24Mar 2019 Cash
0.8593 0.85973-months 1,894.43 1,895.33
1,848.98 0.8383 0.8387Apr 2019 Cash 1 ,848.150.84741,867.58 1,868.28 0.84713-months
0.8049 0.80531,774.57 1,775.33May 2019 Cash
0.8185 0.81903-months 1,804.48 1,805.55
1,754.08 0.7953 0.7956lun 20L9 Cash 1,753.350.8079 0.80831,781.18 1,782.053-months0.8129 0,8132Jul 20L9 Cash 1,79220 1,792.83
0.82391,816.33 0.82343-months 1,815.30
0.7894 0.7897Cash 1,740.31 1,740.93Aug 20191,771.12 0.8031 0.80343-months 1,770.43
0.79361,748.86 1,749.60 0.7933Sep 2019 Cash
1,776.76 0.8055 0.80593-months 1,775.86
0.77961 ,718.83 0.7793Oct 2019 Cash 1,718.130.7831 0.78363-months 1,726.46 1,727 .57
1,772.31 0.8036 0.8039Nov 2019 Cash 1,771.640,8007 0.80121,765.31 1,766.363-months0.8027 0.8030Cash 1,769.73 1,770.40Dec 2019
0.80781,780.80 0.80713-months 1,779.43
0.8034 0.80361,771.73lan2020 Cash 1,771 .14
0.8126 0.81303-months 1,791.41 1,792.32
= Source Quote | 2204,623Source: https://www.lme,com/
Attachment 3
U.S. Harbor Maintenance Fee andMerchandise Processing Fee
United States
Merchandise Processing Fee and Harbor Maintenance Fee
Source: L9 C.F.R. 24.23(bX1) and 24.24(al
0.3464% aMerchandise Processing Fee (%l
Harbor Maintenance Fee (%) 0.1250o/o b
0.4714o/o a + bTotal Port Charges
ñÍirüm;t¡tr,4¡1ar¡-0i^¡&¡Àlvûl¡t -¿{' b¡reùñdN r .t
er.e/r
U,s, cugloms ond Bofdel PÍolecllon' DHsi Tleds.
(4) Foo undor p¿regreph (d) of thltssotton (rål¡roêd oe¡'ß): for oeoh lndl'vlduel errlvêl (untlsr tho monùhly pây-mont end Bt&tomont flltng proooduro),ola,Eo oodo {03; for proDoyment of themaxlmum oalsndar yoar fso, olass ooalo008. Poymont looetlon: for lndlvlalualor.rlv*le (monúh¡y paymont a¡ld 8t9,te-menù flttns), soo peregrepb (dX4Xll) ofthlo Bootlan; for prepÀymgnt, 8eo pa,râ'-
sraph (dX3) of thla eeotlon;(6) x'oo urral6r pqro8ir¿Dh (e) of thfE
sootlon (prlvato vosselr end alroraft):for prlvÊüg Yogsols, ôl&Es ood6 904; forprlvoto olroraft, clasa oodo 49{. Pay-ment looatlon: Port of a'rrlvel for oaohlndlvtitual arrlvs,l (fêð to bo oollootodby OBP qt tho tlmo of er}tv8l) or Pro-pBymont ln aoco¡tlanco wlth paragraph(oX2) of bhts oooblon;
(0) Foe unalor Daregrapb (Ð of thl¡åoctlon (outtablo mell): olass oode 498.
Peymont loootlon: ¡oo Inragraph (f) ofthtE sootton¡
(f) Foe undsr Daragrlaph (sixlxl) ofthtr¡ sooülon (tho t6.fr0 f€e fo¡ oommgr-ot&l vosõol end oommetolal al¡oraftpo¡¡ongers): oles¡ ooalo 49õ. P0,vm6nt Io-oÊblon: eoo paraBraph (sX6) of thls 800-tlon;
(8) Xtse undgr pera,grept¡ (gxlxll) ofthfs aootlon (ths S1.88 foe for oommor-olal yss¡el Bes8enÊlor€): olaee oods '{84.Pa,ymont loo¿tlon: soe paregraDh (c)(õ)ofthl8 sootlon¡ end
(9) Foe undor peregraph (b) of thlsFootlon (ouatoms brokor pormlts): fordtstllot Dormltg, olos¡ ootlo tl9?¡ fo¡ na-ttonal psrmlt¡, ola¡B oodo 00?. Pa¡rmontlooøtlonr ¡€o p4regraph (h) of thls gso-
ûlo¡r.ö) Tïeo,hqent of løes øs c1r'rtont d'uW-
(l) Admlnlstto.Uon qnd, etulorcemertt, vn'less otborwl¡e apeolfloolly provtded lnthh oh¿Dtor, all oalmlnlstretlvo and en-foroomerrt provlslons unalor tho ous-toms levrs and reguløtlono, oühor thÊnthogo tewô and rogulattons rslÂtlng todfowbeolr, wlu appty wtth ro8psoÙ toeny foe plovldod for under thls Boctlon,and wltt¡ ¡eBDsob to eny person llablsfor tho p&ymenü of suoh feo, ac lf suohfso l¡ a customg duty. For purl¡oses ofthls paragiraph, 4ny Þenelty á¡se¡aableln rolatlon to an amount of oustomoduty, wboübo! or not a.ny Euoh duty lcln fà,ot duo a,¡tl payable, wlll bo as-s€sggd ln ths BÂ.me ma,nnsr wlth ¡espeot
s24,23
to eny foe roqulrod to bo Beld underthls B6otlon,
(2) lutlsdlctlon Fo! þurpogoo of doto¡'-mlnlng tho lurlsdtotlon of â,ny ôourü oregonoy of tbo Unlteal Stttos, Èny foeprovtdsd fo¡ under thfs seotlo¡ wlll betroetod a¡ tf suoh fss ls a Ousùomsduty.f,0.D., 93!j00, 68 l'8.:¡f203, Oot. U' 1008, a¡rinürdtiû.bi: T.D. pt{, ôß FÊ $!?0, Deo. 30,r9g8¡ õg ¡t& 006s, Fob; t4l, ue{¡ 1IÐ, 00-Ú0, 08Dn tco{{, Juno 10, 1898¡ oBP Deo. m-lg. 00 sR430ff, July 24, Îffßin F8, g'rtÐ, JÉ,n, e0' ã107tOEP Dô0. 13.08, ?8 S¡l 6106, ¡I¿n.2'l' 2{1191
!24.28 'Feo¡ for prooeedng morchan.dlse.
(ø,) Dsllnltlt'tts. The foilowlns doilnl-tlonñ aDDIy for tl¡o purpos€e of thls sôo-blonl
(I) Q\nfiqu^ed hub |ællltlt, A centîøl-lzed lwb løollttu ts & !oD&rôto, unlquo,ßl¡¡Bilg DuDposo fhoutty normally oDsr.attng outalcle of OBP opera,tlna hourga,pprovod þy tho DorÛ allreotor for ontù5rflllngl, examln&ülon, and.rêloese of ox-DresF oon¡lgnmenü Fhlpmontg, &E Dro-vldod for ln p&rt 128 of thl¡ ohaptor onJuty 00, 1090.
(2) Entare¡t oî release¡L. MorolrÊndlBe 18
enteîød oî rcleaÃed lf tho morolrandlao ln:(l) Reloaðed undlor a spoolal .D€rmtt
for lmmsdlaùo dellvefy unilor 1Ð U.F,O.uá0(b);
(tli EntÊrod or'rniorÍôä; rrom oBPouotody under l0 U¡S.O¡ ItlSl(aX1XA); or
(lU) wlthd¡Èw¡l ûþm ws,rohouBo forconoumptton.
(0) E¡prsrs oonslgtîm,ent ogrrlsl lgolli1cy,An etpress aonslglnntflt cønler lunlUttt løe Boparato or cùa,rod sgoolellzodl faollltyqDpDovotl by the Dott allrootor Eolsly forùho oxomlnôtlon ond roloaso ol exproosoonelgnmont ohlpmolrts, so p¡ovtded forln Da.rt 128 of thl¡ oheptqr on JuIy 80,1900,
(E) MøraÆl entru ot rcleøse. Any ref-eronoo to q fiøfiual form¿l o¡ lnformalontry or rolgÊso muBü not lnolude:
(t) Any formal ot' lnform¿l on0ry orroloa,qe tllorl'by a.n fmDorüor or bro&orwho lE olro¡'&tlonel for oe,r6o relga¡ethrouch tho .tutomctsal Brokor Intor-faoo (ABI) of tbe CBP Automatod Oom-mer.clal Systom (A0S) at any Dortwlbbln tbo Unlüod gtqteBt
(lt) .{ny to¡mal or lnfofma.l ontry orro¡oâso fllod a,t 4 porü whoro 04190 80-¡ectlvlûy lr not fully tmp¡€ms¡rüod lf
õs'l
,àk
s 24.23
ftloct by an lmpo¡to¡ or btokor who l¡opsr.atlonal for AtI ontry summÊry; or
(lll) .{ny lnfo¡mal entDy or ¿üny lrlnoB,sloase ft¡od et 0, port whsro o&rg0 B0-l8otlvlty ts fuuy lmDlsmsntod lt flledby å,n tmporter or brol¡er who lË opor-etlonel fo¡ ^{BI ontry summ&ry.
(6) Srflø¡t ølrgoîl,, or otttat laidlþA, IEmo,ll ølrport ot. ot[t;ct¡.føctrl¿t, ts qny Elr-Dorb or oüh6r Î&olllty whlob has boentleslgnatoil a,s r u8ôr feo faofllby underl9 U.S,O. 68þ enrl st urhloh more thÈn26,000 lnformal ontrloo trere proooereddurlng tho pr.oooallng: flsoel ye&r.
(b) Fee&-(l) Foftnol enw ot releøse-(l) Ad. valorem fe*{Al Glenerø\. tr¡(oeDtea provltled ln paraglraph (o) of thl¡ seo:ûton, meroha,ndlBe tJrot ls lorÍrally ou-tsred o¡ relosaed l¡ ¡uþtooü to tts Þey-msnt to OBP of tn cd 0o¡ororfl feo of0,d481;nûÚcortt¡ Thd 0.9{64 tlduo,lõtä/fi' 13,o
iâ-üüãffififÍirrsblÊ ro oBP by tlrs lm-portor of rooord of the morqhendlso sttho tlme of prolontaùlon of tho ontrysummÈry and l¡ basoal o$ tho velug ottho mo¡obsndtõg ar detormlnod undorrg U.S.O. l40lô. In tho 9X-
ot
covofoal by a,n orblll of ladlng thet tå forma,lly ontorqdantl valuotl r,t ¡l¡,600 or loôs ts ctrþrooù üoÈ t1.00 por ll¡dlvlúuel elr weJtfu or btl¡of tadlng foo &nd. lf applloablo, to the0.9{t{ peroont' ad üølorern fee ln aooord-onoo wlth par&greph (bX4) of tbl¡ seo-ùlon,
(B> Mq.ûlmuîn and mlnlmum fee!, gttþ-Joot to üho provlÊloÍ! of Do,sa,g¡q,pb¡(bxlxlt) 4nd (d) of thls ¡ooülon rolotlngto tho surchergo and to a,ggrogatlgn oftho ed va,lorom foe ros!,ocü1voly, tho adv&lor€nr foo ohorg:od undor Da¡4grôph(b)OXtXA) of thls oooùlotr muot not oN-cood S488 and must not be losÉ than S2ð.
(ll) Suraltorge lor mwtaal enfi! or Íe-leøse, firt tho oo,Fo of any fofmôl ms,nual€ntry or roloqso of mgrohqndlco, â ¡u-r-ohorgre of N3 wlll be aosesEed â,t¡al wlll b0ln âddltlon to eny â,d vÊlorÉm fooohersod untlor parag'raphs (bxl)(fxÀ)¿nrl (B) of tùls Eoctlon,
(2, IrtÍonnøI entry ot rcteaÃe. Xl¡(aopt lntho caso of morohandlce oovorod byDeregixa.ph (bX3) or peregloph (bX4) ofthts socülon, ¿nd exooDt as'othorÌvlsoprovldoit ln paragraph (o) of thlE oeo'tlon, rn€roh4ndlB6 thet ls lnform¿lly
19 CtR Ch. I (¡t-l-15 Edltlon)
sntored or roloassd ls subJeot to bhepeymo¡rt to qBP of d foo of:
(t) $2 tf tho ontry or f,oleeeo ls auto-metôd onal not progo,roal þy OBP Þor'-oonnol¡
(lf) t6 tf tbe ontry or ¡oloaso lB ma,n-uai and not proparod by oBP porgon¡¡olior
(ft) $0 tf tho sntry or relas8o, wl¡oth-ðr &utömeted or mqnual, fs proparod byOBP porsonnel,
(8) ób¡øll qfiport ot other laßllltu, tû/dtrh¡spDeot to ths p¡poss¡lng of lettsr¡,(looumentg, rooordB, shlÞmont8, msr-oh¿ndlse, o¡ any othor ltsm thot 1g val-ued et t2,d00 or loao, or any hlgbertmount D¡o¡orlbeil for pur¡toåog of ln-forma,l entry ln 0148.21 of thlË ohaÞtor,e Êmell slrDort or otbor fq,olllty musbDey üo oBP en &mount equal to the rs-lmþur¡omo¡rt (tnolutltng ovortlmo)whtob t'he feplltty lß rsqullort 0o makedurlng tlre flsool yoar undsr $24,1?,
(4) E¡pre¡s condgnmenl cørrler ondaentrallped hub tocllltlea, Deoh oarrlor oro¡rorêtor uslng a,n orpross oo¡¡sl8nmontotrrlor faolllty or o oontrallzstl hub fa.olllty mußt pey to OÊP a feo tn tùroemount of $1.00 Der lntllv&luel alr wey-btll or lnallvtduel þtll of ladlns for thep¡ooos0lng of elrwoy bllls for shtp-montg Èrrlvlng tn tho U,É. In adilttlon,lf m€mh$ndtBo ls formally onterod andvaluodl ot S8,600 or le¡s, tho lmportor ofrsoo¡tl mugt pay to OBP lto ad uølorønfes gDeolflorl In pqrrgrepb (bXl) of üblsBootlon, ll,rpDlloable. An lndlvl(tuel alrwayblll or lndlvtdua.l bll¡ of lodtng lstbe lndlvlüuol doqumonü lsruod by thooa¡Tler or apot¿tor for t¡an¡Dortln8&nd/os trsohlng an lndlvlduol ltom, ¡oÞtor, Deok&go, onvolopo, reoord, doou-mont, or ahtÞment. An lndlvl(luol elrwøyblll le tho þfll et the lowo¡t levol,end ls not t, mêütor blll or otbe¡' oon-dollda,teal docnmont, An lndlvlôu&l 0,lrweyDtll or blll ol lodlng l¡ a blll rep-roeenblng an lndlvldu¿l ¡hlpment ühathe¡ lt¡ own unlquo bf¡l numbor ondtrqoklng number, whero the shlpm€ntl¡ as¡l8ilroal to o slnBlo ultlma,to oorr-¡lginse, antl .no lowor blll unlt exlsü¡.Payment murfi D6 medo to OBP o¡¡ aqua¡üor¡y beslE ond mu6ü oovot the ln-dlvlilual foss for all subJect ürans-aottons ûh¿t oocurrnd during a calondarquorto!. llrho foltowlng oddltlon¿l re-qulremonüs ond oondltlons øpply to
!
IJ
,
1
I
õ98
'¡tr¡iirrni¡r¿r /*:a i i!¡trcfiltr..JTur¿{
il¡,dll^ll¡Ð . b,'þ1þ¿4:
'¿'
U.S. Cuslom$ qnd Border Prolecllon, DHS; Tleos.
w¿rohouso for conÐumptlon, orr or ôftorMÊroh 16, 2012.
(1a) Tho atl valore¡n foo, su¡oharge,anil opeolflo foes provldod undor poro-Trephé (bxl) o¡rd (h)(zXt) of thls aedttonwul uoù a,ÞÞly to Fooals th&t quellfy ôsorlcl¡retlng 8iood¡ under seoüton 2m ofthe Unlüerl States-Oolombla lDrodo Pro-motlon Agreomsnú ImplornentatlouAgt (see øIso Goneral Not€ 8{, IfIgUSthot oro ontoroal, or wltbdrawn flomworohouo€ for oonsumptlon, on or afte¡May 16,2018.
(f6) Tho ad vølotom fee, surohelgis,and apoolflo fooo provldod undor para-Braphs OXI) and (bXzXf) of t¡rl8 rootlonwlll rrot apt)¡y to goodB thot quêllfy â6orlgtnq,ttng Boods undor dootlon 208 oftho unttod Êtet€s-Pa,n4ma Trode Pro-motlon A8itoomont ImDlomontettonAot (ces ç¡¡o Gonorcl Noto 86, gTgus)üh&t aro entored, er wlthdrewn lrqmw&rehouFe for ooneumptlon, on or afterOotobor 2e, 201â.
(dl Aggregdtlon oÍ øcl ucLlqrem les. (1,Notwltb8tandlng Ény other Dúovlsloa ofthls Fgotlon, ln tbs a¿¡o of ontrlo$ ofmúohandl8o made undor any tom-pofery monthly o¡tily Drogrem ostab-Uùod Þy OBP bofore iluly I, 19t0, fortho purposo of toøtlng ontry proossslnglmprovement¡, tho ed va,lorom foooha,rgsd under parogroph (bXlXt) ofthls soatlon for oeoh doyrs lmporta-tlonl et q¡¡ lndlvlatual port vt'lll bo tholssger of the follorvln8, pmvldod thatthone lmportattons lnvolve the samolmporügr and oxDortor:
(t) S400i or(lt) Tbe ünount doüsrmlnecl by å,pply-
lug the &d valo¡om râto u[dor Parð-srÉph (bXlXt)(A) of thfo Eeotlon üo tl¡etota,l velue of such da,lly lmDortetlons.
(e) Tho foeß es dsterml¡sa¡ undorIrorâ,gra,Þb (rl)(1) of thf6 oeotlon must þopçtd to OBP ot tbe tlme of prosontotlonof the monthly ontrv rummory. Inüer-ost wlll aooruo on the foos peld month-ly ln eocordatroo wlth geotlon 862L o1the Inüorna.l Rovenuo ooalo of 1988.
(o) T"eøtmer.t ol lees w oustoms d,uly-(l) Adnlntstrøtlon q.nd enlorcement, Vn-loss oüborl¡etso Bpcolfloa,uy Drovlded ln
5u,24
thls ohopts¡, a,ll s,almlnlÊtretlvo 4nd on-foroement provlølong unalor tho oug-toms la,w8 and roguloùlons, othor ühenthoso ¡qws and ro8ul¿ùlons relqtlng todrev/bÊok, wlll apDly wlth ¡eoDoot to&ny foo gravldod foD turalor thlð 8€otton,end Ìvtth rospeqt to any person llaþlefor tho pÈymont of euoh foo, as lf suohfss lE a cuBtomE tluüy. For puDposos ofthls Da,rêgDaph. any ponelty a,sEossebloln rôI&tlou to a,n 4mount of ou8tomEduty, wheùher or not a,ny auoh tluty lsfn fa.ot tlud a,nd peyeblo, wlll bo a¡-¡egeed ln úho sême mÂnnor wltb roapeotto aày foo requlred to bo Dalal undorühls Bootfon.
(2r,Iurlsdlailon For purpoees of dotsr-mlnlng ùho lurlsillotlon of êny oourt oregenoy of tbe Unltod gtÊtos, any fooprovtdod for undor thl¡ ssotlon wlll botroatocl a¡ lf ¡uqh fos ls o ousüoms duty.
[rD,D. 91-38, 68 FIù lõ030, ADr. 16, 1091¡
DDI¡OBIAÚ NOTtr: POf FT¡DÞE¿IT, NEOISTDE OT.
$atlons &ffsotlng l9{¿S, s€o tbo IJIBt 0f OFR,gootlon8 Affootod, wblob eppeaËs tú thoEtÞdlng AtdÉ rgo9loD of tl¡e Drl¡rtôd volumotn6 si utúu.Í¡lslt s,g ov.
C84.&4 Hnrbor maintsn¡noo fos.
F¿e, Oommgrolel os.rto loedod onfrom a
ompt un(lor Daragreph (o) of tl¡fs soo-tlon or ono of tho ßpeolel rulos ln porê-groph (at) of thla sootlon 1¡ appllooblo.
(b) Daflnltlon|, For ths purpo66 of thl8so0tfon:
(L) Püt moa,n8 &ny ohônno¡ or herbor(or oomDonont tho}oo0 ln thg ouoüomEtorrltory of tùo Unlt€al StêtoÉ whloh lBnot en ln¡end
ordooð not lnoludo ohEnnols or h¿rborodo&uthortøoô by Fstloral law Þofore1986, A oomplot€ llút of the porür suÞ,øot to th€ herþor ma,lntgnÈnoo fgo lrsot forth below:
F.t
l:
4
1
:
tIa
I
601
Attachment 4
Movement Charges in the Home Market
SloveniaDoing Business in Slovenia 2020
Movement Charge Calculations
Foreign Inland Freight - Export
Location I Location 2 AveraseDomestic transport cost (USD) $l r9 $119 a Þ.49Distance (km) 100 100 b p.49
Iotal Weisht of shipment (ke) 15.000 c p.46
Cost per kilogram $0.00793 d:a/c USD/KeCost per pound $0.00360 0.454 * d USD/Ib
Cost Þer kiloeram per kilometer $0.00008 d/b USD/Ke/kmCost per Dound per kilometer $0:00004 0.454 * dtb USD/Lb/km
Location I Location 2 AverageDomestic transport co$ ruSD) $l l9 $r l9 a p.49
Distance ftm) 100 100 b Þ.49Total Weisht of shipment (ks) 1 5.000 c p.46
Cost per kilogram $0.00793 d:a/c USD/ksCost per pound $0.00360 0.454 * d USD/Ib
Cost Der kiloeram per kilometer $0.00008 dlb USD/Ke/kmCost þer pound per kilometer $0.00004 0.454 * d/b USD/Lb/km
Forer
Location I Location 2 .Average
Cost to Export: Border Compliance (USD) $0 $0 e þ.47Cost to Export: Documentary Compliance (USD) $0 $0 f p.47
Tot¿l $0 $0 $0 s:e+f
Total Weieht of shipment &e) 15.000 h p.46
Cost per kilogram $0.00000 slh USD/KsCost per pound $0.00000 0.454 * Elh USD/Lb
Forei
Location I Location 2 Average
Cost to Import: Border Compliance (USD) $o $0 e2 þ.47Cost to Import: Documentary Compliance (USD) $0 $0 f2 p.47
Total $0 $0 $0 s.2=e2+f2
Total Weieht of shipment (ke) 15,000 h2 p.46
Cost per kilogram $0.00000 s.2lh2 USD/KsCost per Dound $0.00000 0.454 * s2lh2 USD/Lb
Fll¡tqllÍEl
ID
Page 1
FIElEffi
Stârtlng a buslnsss
Dealing wlth construction Pe?mlts
Gottlng olsctrlclty
Reglster¡ng property
Gottlng c¡sdlt
Economy Profile of Slovenia
Dolng Buslness 2020 lndicators(in order of appearance in the document)
Procedures, time, cost and paid-in minimum capital to start a limlted liability company
procedures, time and cost to complete all formalit¡es to build a warehouse and the quality control and safety
mechanisms in the construction permitting system
procedures, time and cost to get connected to the electrical grid, and the reliability of the electric¡ty supply and
the transparency of tar¡tfs
Procedures, t¡me and cost to transfer a property and the quality ofthe land admin¡stration system
Movable collateral laws and credit informatlon systems
Protêctlng minor¡ty investors
Põying taxes
Tradlng across bord€r3
Ënforc¡ng contracts
Resolvlng ¡nsolvency
Employing work6rs
Minority shareholders' r¡ghts ln related-party transacUons and in corporate governance
payments, t¡me, total tax and contribution rate for a fìrm to comply w¡th all tax regulations as well as postfiling
processes
Time and cost to export the product of comparatlve advôntage and import auto parts
Tlme and cost to resolve a commercial dispute and the qual¡ty ofiudicial processes
Time, cost, outcome and recovery rate for a commercial insolvency and the strength of the legal framework for
¡nsolvency
Flexibility in employment regulation and redundãncy cost
Page 2
About Doing Eusiness
The Do,ng Bus,ness pÍoject provides objective measures of business regulations and their enforcement across 190 economies and selected cities at the subnational and
regional level.
The Do¡,t4g Bustness project, launched in 2002, looks at domest¡c small and medium-size compan¡es and measures the regulations applying to them through the¡r life
cycle.
Do,ngBus¡,7,esscapturesseveral importantdimensionsoftheregulatoryenvironmentas¡tappliestolocal fìrms ltprov¡desquantitativeindicatorsonregulationfor
borders, enforc¡ng contracts and resolv¡ng insolvency. Doing Bus¡ness also measures features of employing workers. Although Doing Eusinoss does not present rankings
of economies on the employing workers indicators or include the topic in the aggregate ease of doing business score or ranking on the ease of doing business, it does
present the data for these ¡nd¡cators.
By gathering and analyzing comprehensive quantitat¡ve data to compare business regulation environments across economies and over time, Dorng Eus,ness encoufages
economies to compete towards more eff¡cient regulation; offers measurable benchmarks for reform; and serves as a resource for academ¡cs, journal¡sts, private sector
researchers and others interested in the business cl¡mate of each economy
ln addltion, Do¡rg Bus,n6ss offers detailed subnat¡onal studles, wh¡ch exhaustively cover business regulation and reform in different clties and regions within a nation.
These studles provide data on the ease of doing bus¡ness, rank each location, and recommend reforms to improve performance in each of the indicator areas. Selected
cities can compare the¡r business regulatlons with other cit¡es ¡n the economy or region and w¡th the 190 economies that Oolng Eusrness has ranked
lhe(rsLDoingBusiness study, published ln 2003. covered 5 ind¡catorsets and 133 economies, Th¡s year's study covers 1l indicator sets and 190 economies. Most
indicator sets refer to a case scenario in the largest business city of each economy, except for 11 economies that have a population of more than 100 m¡llion as of 2013
(Bangladesh, Brazil, china, lndia, lndonesla, Japan, Mexico, Niger¡a, Pakistan, the Russian Fedefation and the un¡ted states) where Dong Bus,ness also collected data
for the second largest business city. The dôta for these 1l economies are a population-we¡ghted average for the 2 largest business clt¡es The project has beneflted from
feedback from governments, academics, practitioners and reviewers. The ¡nitlal goal remains: to provide an object¡ve basis for understandlng and improving the
regulatory environment for business around the world.
To learn more about Do,ng Susiness pleôse v¡sit doingbusiness.org
Page 3
$þTrading across Borders
Do,hg gus,nass records the t¡me and cost associated with the logistical process of exporting and importing goods. Do¡hg Bus,ness measures the time and cost (excluding
tariffs) assoclated with three sets of procedures-documentary compliance, border compliance and domest¡c transport-within the overall process of export¡ng or
importing a shipment of goods. The most recent round of data collect¡on for the project was completed in May 2019. See the methodology for more informat¡on'
Documentary compllanco
. Obtain¡ng, preparing and submitting documents dur¡ng
transport, clearance, inspect¡ons and port or border handling ¡n
orlgln economy
. Obtain¡ng, preparing and submitt¡ng documents required by
dest¡nat¡on economy and any transit econom¡es
. Covers all documents required by law and in practice, including
electronic submissions of information
Border compllonce
' Customs clearance and ¡nspect¡ons
t lnspect¡ons by other agencies (if applied to more than 20% of
sh¡pments)
. Handling and inspectionsthattake place atthe economy's port
or border
Domestlc trÈnsport
. Loading or unload¡ng of the shipment at the warehouse or
Poruborder
. Transport between warehouse and porVborder
. Trâffic delays and road police checks while shipment is en
route
To make the data comparable across economies, a few assumptions are made about the traded
goods and the transactions:
Tlme: Time is measured in hours, and 1 day ls 24 hours (for example, 22 days are recorded as
22x24=528 hours). lf customs clearance takes 7.5 hours, the data are recorded as is. Alternatively,
suppose documents are submitted to a customs agency at 8:00a.m., are processed overnight and
can be picked up at 8:004.m. the next day, The time for customs clearance would be recorded as
24 hours because the actual procedure took 24 hours.
Cort: lnsurance cost and informal payments for whlch no receipt is issued are excluded from the
costs recorded. costs are reported in U.S. dollars. Contributors are asked to convert local currency
into U.s. dollars based on the exchange rate prevailing on the day they answer the quest¡onnaire.
contributors are pr¡vate sector experts in international trade logistics and are informed about
exchange rôtes.
Assumptions of the cas€ study¡- For all I90 economies covered by Do,ng 8us¡hess, lt is assumed a shipment is in a warehouse in
the largest business c¡ty of the exporting economy and travels to a warehouse in the largest
business city of the importing economy.- It ¡s assumed each economy imports 15 metric tons ofcontainerized auto parts (HS 8708) from
its natural import partner-the economy from which it imports the largest value (pr¡ce times
quantity) of auto parts. lt ¡s assumed each economy exports the product of ¡ts comparat¡ve
advantage (defined by the largest export value) to its natural export partnei-the economy that is
the largest purchaser of this product. Shipment value ¡s assumed to be $50,000.- The mode of transport is the one most widely used for the chosen export or import product and
the trading partner, as is the seaport or land border crosslng.
- All electron¡c information submlssions requested by any government agency in connection wlth
the shipment are considered to be documents obtained, prepared and submitted dur¡ng the export
or import process.
- A port or border is a place (seaport or land border crossing) where merchandise can enter or
leave an economy.- Relevant government agencies include customs, port author¡ties, road pol¡ce, border guards,
standardlzation agencies, mlnistr¡es or departments of agr¡culture or lndustry, national security
agenc¡es and any other government authorities.
Page 46
FIEIEnb
Trading across Borders - Slovenia
lndlcator Slovenla OE€D hlgh lncome Best Regulatory PerfoÍmance
cost to export: Border compliance (USD) 136.8 0 (19 Economies)
Cost to export: Documentary compliance (USD) 33.4 0 (20 Economies)0
Cost to import: Border compliance (USD) 98.1 0 (28 Economies)0
Cost to ¡mport: Documentary compliance (USD) 23.5 0 (30 Economies)0
Tlmeto
export:Border
compliance
Costto
export:Border
compliance
Tlmeto
exporhDocumentarycompllance
Costto
export:Documentarycompllance
Costto
lmport;Border
compllance
Tlmeto
lmport:Oocumentarycompllance
Costto
lmport:Oocumentarycompllance
Tlmeto
import;Border
compllânce
DB 2020 Trðding Across Borders Score
100
Reglonal Average {OECD hlgh lncome)
100: czech Republlc (Rank: 1)
100: Hungary (Rank: 1)
100: Poland (Rank: I)
100: Slovak Republlc (Rank: I)
lOO! Slovenla (Rankr ll
Note: The ranking of economies on the ease of trading across borders is determined by sorting their scores for tradlng across borders, These scores are the simple
average of the scores for the t¡me and cost for documentary compliance and border compliance to export and import,
Page 47
ßnrFllfiE
* Time (hours) '- Cost (USD)
L,2
1
0.8
0.6
oÞ
I
I
Ets
L.2
I
0.8
0.6
0.4
o.2
00
o.2
00 0
lmport
gor¿"rCompliance
Export
aoi¿ercompllance
Export
DocumentaryCompllance
lmport
DocumentaryCompllance
Page 48
t.!. i '.,.1
ìlÞetjl!ç{ rr¡u!¡g acmss Eorders ln slov€nla :'
Character¡stics
Trade partner
Export
France
lmport
Frânce
D¡stance (km) 100 100
Domest¡c transport cost (USD) 119 119
Tlme to completc (hoursl Assoclat6d costs (uSD)
Export: Clearance and ¡nspect¡ons required by
agencies other than customs
0.00.0
lmport: Clearance and inspections required by
customs authorities
lmport: Port or border handl¡ng
0.00.0
0.0 0.0
Page 49
lmportExport
Commercial lnvoice Commercial invoice
lntrastat lntrastat
Page 50
Attachment 5
Transport Distances for U.S. and HomeMarket Movement Gharges
Ranged Data
HM DistancesProducer Name of Port Distance to Port
*
U.S. DistancesU.S. Customer Location Distance from Port
PUBLIC VERSION
t I
II
THE BUSINESS PROPRIETARY ATTACHMENT
IS NOT SUSCEPTIBLE TO SUMMARIZATION
I\ND THEREFORE IS NOT PROVIDED
WITH THIS PUBLIC VERSION
Attachment 6
Movement Charges in the U.S.Market
United StatesDoing Business in United States 2020
Movement Charge Calculations
U.S. Brokerage
New York Los Angeles Average
Cost to Imporl: Border Compliance (USD) $l 75 $ 175 s17s e pp. 82, 86
Cost to Import: Documentary Compliance (USD) $100 $100 $100 f pp. 82. 86
Total s27s s=e+f
Total Weisht of shipment (ks) 15.000 h p,8l
Cost oer kilosram $0.01833 F/h USD/KeCost per þound $0.00832 0.454 * Elh USD/Lb
U.S. Inland Freight
New York Los Angeles Average
Domestic transport cost (USD) $4.373 $1.931 $3. I s2 a on.84. 88
Distance (km) 3,192 1,295 2,244 b pÞ.84. 88
Iotal Weieht of shipment (ks) 15.000 c 0.81
Cost per kilosram $0.21013 &a/c USDiks
Cost per kiloeram Þer kilometer $0.00009 d/b USD/Ke/kmCost per pound per kilometer $0.00004 0.454 * dlb USD/Lblkm
IMTTTTE'N:s
DI
Page 1
IITilFñf,IæE
Startlng s buslness
Þêallng w¡th construction permlts
cettlng olsctriclty
Reg¡stèring property
Gèttlng crGd¡t
Protoct¡ng mlnoriv invBstors
Paylng tax€g
Trâdlng rcross borders
Enforcing cont¡acts
R€solvlñg ¡nsolvency
Employ¡ng worko16
Economy Proflle of Un¡ted States
Dorng 8us,'hess 2020 lndicators(in order of appearance in the document)
Procedures, time, cost and paid-in minlmum capital to start a limited liability company
Procedures, time and cost to complete äll formalities to build a warehouse and the quality control and safety
mechanisms in the construction permitt¡ng system
Procedures, time and cost to get connected to the electrical grid, and the reliability of the electricity supply and
the transparency of tariffs
Procedures, time and cost to transfer a property and the quality of the land admin¡stration system
Movable collateral laws and credit informãtion systems
M¡nority shareholders' rights in related-party transactions and ¡n corporate governance
Payments, time, total tax and contribution rate for ô firm to comply with all tax regulations as well as postf¡ling
processes
Time and cost to export the product of comparat¡ve advantage and import auto parts
Tme and cost to resolve a commerc¡al dispute and the quality ofjudicial processes
Time, cost, outcome and recovery rate for a commercial insolvency and the strength of the legal framework for
lnsolvency
Flexib¡lity in employment regulation and redundancy cost
Page 2
ErãßEItS
About Doing Business
The Oo¡ng guslrêss project provides oþjective measures of business regulations and their enforcement across 190 economies and selected c¡ties at the subnatlonal and
regional level.
Iíe Doing Business project, launched in 2002, looks at domest¡c small and medium-s¡ze companies and measures the regulations apply¡ng to them through their life
cycle.
Doing Business captures several important dimensions of the regulatory environment as it applies to local firms. lt provides quantitative indicators on regulation for
borderi, enforcing contracts and resolving insolvency. Dolng Bus,ness also measures features of employing workers. Although Doing Eus,ness does not present rankings
of economies on the employing workers indicators or include the topic ¡n the aggregate ease of doing business score or rank¡ng on the ease of doing business, it does
present the data for these ¡ndicators.
By gather¡ng and analyzing comprehensive quantitat¡ve data to compare bus¡ness regulation environments âcross economles and over t¡me' Ooing Eusiness encourages
economies to compete towôrds more efficient regulation; offers measurable benchmarks for reform; and serves as a resource for academics, journalists, prlvate sector
researchers ônd others interested ln the business climate of each economy.
ln addition, Doing Bus,ness offers detailed subnational studies, which exhaustively cover business regulation and reform in different clties and regions within a nation'
These studies provide data on the ease of doing business, rank each locat¡on, and recommend reforms to improve performance in each of the ind¡cator areas Selected
c¡ties can compare the¡r business regulations w¡th other cities in the economy or region and with the 190 economies that Oo,hg Eus,ness has ranked.
The f¡rst Dolng Business study, published in 2003, covered 5 indicator sets and 133 economies. This yeaf's study covefs 11 indicator sets and 190 economies. Most
indicator sets refer to a case scenario in the largest business city of each economy, except for 11 economies that have a population of more thân 100 million as of 2013
(Bangladesh, Brazil, china, lnd¡a, lndonesiâ, ,apan, Mexico, Niger¡a, Pakistan, the Russian Federation and the un¡ted states) where Dotng 8usØess also collected datâ
for the second largest buslness city. The data for these l1 economies are a population-weighted average for the 2 largest business cit¡es. The pro.¡ect has benefited from
feedback from governments, academics, pract¡tioners and reviewers. The in¡t¡al goal remaìns: to provide an objective basis for understanding and improving the
regulatory env¡ronment for business around the world.
To learn more about Doing Eus,ness please v¡sit doingbusiness.org
Page 3
IlrilfilnI"{ãr:F
SbTradlng across Borders
Dorng Busnsss records the time and cost associated with the logistical process of exporting and import¡n9 goods. Do¡ng Businêss measures the time and cost (excluding
tariffs) associôted with three sets of procedures-documentary compliance, border compliance and domestic transport-w¡th¡n the overall process of exporting or
lmporting a shipment of goods. The most recent round of data collection for the project was completed in May 2019. See the methodology for more informat¡on.
ål, *tDocumêntâry compllance
' obta¡nin9, preparing and submitting documents during
transport, clearance, inspect¡ons and port or border handling in
origin economy
. Obtaining, pÍeparing and submitting documents required by
destlnation economy and any transit economies
. covers all documents required by law and in pract¡ce, includ¡ng
electronic submissions of information
Bordor complianc€
' Customs clearance and inspections
' lnspect¡ons by other agencies (if applied to more than 20olo of
shipments)
. Handl¡ng and inspect¡ons that take place at the economy's port
or border
Dom6stlc transport
. Loading or unloading of the shipment at the warehouse or
porVborder
. Transport between warehouse and porvborder
. Traffic delays and road police checks while shipment is en
route
To make the data comparable across economies, a few assumptions are made about the traded
goods and the trônsact¡ons:
T¡mer Time is measured in hours, and I day is 24 hours (for example, 22 days are recorded as
22x24=528 hours). lf customs clearance takes 7.5 hours, the data are recorded as is. Alternatively,
suppose documents are submitted to a customs agency at 8:00a.m., are processed overnight and
can be picked up at 8:00a.m. the next day. The time for customs clearance would be recorded as
24 hours because the actual procedure took 24 hours.
cost: lnsurance cost and ¡nformal paymenLs for which no receipt is issued are excluded from the
costs recorded. Costs are reportèd in U.S. dollars. Contributors are asked to convert local currency
into u.s. dollafs based on the exchange rate prevailing on the day they answer the questionnaire.
contributors are private sector experts in international trade logistics and are lnformed about
exchange rates.
Assumptlons of the caso study:- For all 190 economies covered by Do,ng 8us,';4ess, it ¡s assumed a shipment is in a warehouse in
the largest business city of the exporting economy and travels to a warehouse in the largest
business city of the importing economy.
- lt is assumed each economy imports 15 metr¡c tons of contalnerlzed auto parts (H5 8708) from
its natural import partner-the economy from which ¡t imports the largest value (price times
quantity) of auto parts. lt is assumed each economy exports the product of ¡ts comparat¡ve
advantage (defined by the largest export value) to its natural export partner-the economy that is
the largest purchaser of th¡s product. Shipment value is assumed to be $50'000.
- The mode of transport is the one most widely used for the chosen export or import product and
the trading partner, as is the seaport or land border crossing- All electronic information submissions requested by any government agency in connection w¡th
the shipment are considered to be documents obtained, prepared and submitted dur¡ng the export
or import process,
- A port or border is a place (seaport or land border crossing) where merchandlse can enter or
leave an economy.- Relevant government agencies include customs, port authorities, road police, border guards,
standard¡zation agencies, ministries or departments of agriculture or industry, national secur¡ty
agencies and any other government authorit¡es.
Page 81
Tradlng across Borders - New York C¡ty
lndlcator ilew York C¡ty OECD h¡gh lncoma Best Regulatory P€rformance
cost to export: Border compliance (USD) 175 136,8 0 (19 Economies)
Cost to export: Documentary compliance (USD) 60 33,4 0 (20 Economies)
Cost to import: Border compliance (USD) 175 98,1 0 (28 Economies)
Cost to import: Documentary compliance (USD) 100 23.5 0 (30 Economies)
.f1me
toexport:Border
compllance
costto
export:Border
compliance
Timeto
export:Documentarycompl¡ance
Costto
€xport:Documentarycompliance
T¡meto
lmport:Border
compliance
Costto
import:Border
compl¡ance
Tlmeto
importiDocumentarycompllance
Costto
lmport:Documentarycompliance
DB 2020 Trading Across Borders Score
100
Un¡ted Kingdom (Rank: 33)
Angeles
York Clty
(Rank:42)
88.4: (Ranki 5l)
I00: France (Rank: 1)
Note: The ranking of econom¡es on the ease of trading across borders is determined by sorilng theÍr scores for trading across borders. These scores are the slmple
average of the scores for the time and cost for documentary compliance and border compl¡ance to export and import.
0
l*92.O!
91.8:
Page 82
¡. :ai,i:: ::',ì:ì:.r-,,iiì i:jirl_r r ;¡i. i.: ,i,rii¡iA1)f:
f
o
oÊoÉF
- Time (hours) '* Cost (USD)
200
150
100
50
0
9
I7
6
5
43
2
1
0
175175
100
lmportExport
gor¿erCompllance
Export
DocumentaryCompliance
lmport
EorderCompl¡ance
Documenta¡yCompllance
Page 83
i,DëiJi.",.lr.¡,¡g¡s4çrc:rBòrdonhL4pW:YlF..Ç!9-:.¡.::
charactorlstlcs
Trôde partner
Export
Canada
lmport
[4exico
Distance (km) 600 3192
Domest¡c transport cost (USD) 1361 4373
.-!.,.ii:,,''..ri:,)i..ilrirl*..i
Tlmo to Complets (hour5)
0.0
Assoclated costs (uSD)
Export: Clearance and inspect¡ons required by
agencies other than customs
0.0
lmport: Clearance and inspect¡ons requlred by 1.5
customs authorities
lmport: Port or border handling 0.5
r75.0
0.0
Page 84
Export lmport
Commercial lnvo¡ce/ cargo control document NAFTA - Certificate of origin
Pôcking List Packing List
Customs Entry Form 7501
Page 85
Tradlng across Borders - Los Angeles
lndlcåtor Los Angeles OECD hlgh lncome Eost Regulatory Perform¡nce
Cost to export: Border compliance (USD) 175 136.8 0 (19 Economies)
Cost to export: Documentary compliance (USD) 60 33.4 0 (20 Economies)
Cost to import: Border compliance (USD) 175 98.1 0 (28 Economies)
Cost to import: Documentary compliance (USD) 100 23.5 0 (30 Econom¡es)
ïmeto
export:Border
compliance
Costto
export:Border
comp¡¡ance
Tlmeto
export:Documentarycompllance
Costto
export:Documentarycompliance
Tlmeto
lmport:Border
compliance
Costto
lmport:Border
compllance
Timeto
lmport:Documentarycompllance
Costto
import:Documentarycompl¡ance
DB 2020 Trading Across Borders Score
o 100
Unlted Klngdom (Rankr 33)
Àngelss
York City
(Rank:42)
88.4: (Rank: 5I)
100: France (Rankr 1)
Note: The rank¡ng of economies on the ease of trading across borders is determined by sorting the¡r scores for trading across borders. These scores are the simple
average of the scores for the t¡me and cost for documentary compliarice and border compliance to export and import.
t92.0:
91.8:
Page 86
, :¡lþiiiÈ¡1 lrad!n g aooes Bordersi ln.lôqrN¡g g!gríi.l-tJpda.nd:cirÊt j,',-ì. /(...:. r'1.
* Cost (USD)
'i r;i'i¡:¡" ,. ':i, : ¿: L':
* Tlme (hours)
ôo
Ei:
200
150
r00
50
0
9
I7
6
5
4
2
1
0
... ..... 100 -......-..." ---.
Export
BorderCompllance
60
Export
DocumentaryCompllance
lmport
BorderCompliance
lmport
DocumentaryCompl¡ance
Page 87
Det¡lls- Tradlng rcrorr Bordsr¡ ln Los Angelee :
Charact6rlstlcs Export lmport
Trade partner Canada Mexico
D¡stance (km) 3670 1295
Domestic trânsport cost (USD) 6017 1931
Tlm6 to Complete (houre) Âssoclat€d Costs (USD)
Export: Clearance and inspections required by
agencies other than customs
0.0 0.0
lmport: Clearance and inspect¡ons required by 1.5
customs authorities
175.0
lmport: Port or border handling 0.5 0.0
Page 88
ÚilTIIIFIEIEE
Export lmport
commercial ¡nvoice/ cargo control document NAFTA - Certificate of or¡gin
Pack¡ng List Packing List
Customs Entry Form 7501
/
Page 89
Attachment 7
Ocean Freight and Marine lnsuranceCharges
¡
Ranged Data PUBLIC VERSION
Ocean Freight
Maersk Ocean Freight Jan 2019 Feb 2019 Mar 2019 Apr 2019 May 2019 Jun 2019 Jul 2019 Aug 2019 Sep 2019 Oct 2019 Nov 2019 Dec 2019 Average
Slovenia Port United States Port
[ ]
[ 55.00$ ]
[ ]
[ 370.00$ ]
[ ]
Total Average Ocean Freight Charges [ ]
40' full container kg 28,800 28,800 28,800 28,800 28,800 28,800 28,800 28,800 28,800 28,800 28,800 28,800 28,800
Unit charges: USD/kg [ ]
USD/lb [ ]
Source: http://www.maerskline.com
Ocean Freight to United States
Dry Cargo - Aluminum, Aluminum Articles, Metal
Marine lnsurance
$ 0.87
Source:
lnternational Marine lnsurance, basic Coverage
$ 100.00 at 10jo/o 0.87o/o of valueper
http://www.grw-prod ucts.com/onlinerates. htm
Basic Coverage lnsurance Rates -for DOMESTIG Shipments (within USA & Canada)
Roles ore per Sl00 volue ol ln¡uronce coveroge
I
For ALL Rlsk Coverag€ pleâ3€ cåll 1-800-541-0700 for pr¡c¡dg.
LAND OCEAN AIR
New or Used M 0.66 0.66
2.03
Basic Coverage InsuraRce Rates -for INTERNATIONAL Shipments (Outside US & Canada)
Role¡ qre per $100 volue ol ln¡urcnce coverdge
For ALL Rbk Coveraa€ óleâso c6ll 1-800-541-0700 for Ddc¡nq.
Steel 1.87
o.87
ê---
THE BUSINESS PROPRIETARY ATTACHMENT
IS NOT SUSCEPTIBLE TO SUMMARIZAT.ION
AND THEREFORE IS NOT PROVIDED
WITH THIS PUBLIC VERSION
Attachment IU.S. lmport Duties
\o%
IOo/o
LOo/o
to%
LO%
10%
!o%
10%
LO%
!o%
to%
to%
70%
to%
10%
LO%
10%
to%
LO%
to%
Free (A)
6.50%
6s0%
Free (A)
6.50%
Free (A)
6.5%
Free (A)
6.so%
1.3% (KR)
Free (A)
Free (A)
6s0%
65o%
6.50%
Free (OM)
6.50%
Free (BH)
Free (A)
6.50o/o
2.70%
2.70%
2.70%
Free (A)
2.70%
2.70%
Free (A)
2.70%
Free (BH)
Free (A)
2.70%
Free (A)
2.7%
Free (A)
2.70%
2.70%
Free (A)
Free (A)
Free (OM)
2.70%
Free (A)
3%
3%
Free (A)
3%
3%
Free (A)
3%
Free (A)
3%
0.6% (KR)
Free (A)
Free (A)
3%
3%
3%
Free (OM)
3%
Free (BH)
Free (A)
3%
Free (A+)
3%
3%
Free (A*)
3%
3% (A*l
3%
Free (A*)
3%
Free (A*)
3%
3o/o
Free (A*)
Free (A*)
3%
3o/o
Free (OM)
3%
Free (BH)
Free (A)
Free (A)
3%
3%
3%
Free (A)
3%
3%
Free (A)
3%
Free (OM)
3%
Free (BH)
Free (A)
3%
Free (A)
3%
Free (A)
3%
3%
Spain
Egvpt
Slovenia
Croatia
Serbia
Romania
Bahrain
lndonesia
Taiwan
lndia (pre-June 5, 2019)
lndia (June 5,2OI9 and after)
Turkey (pre-May L7, 20191
Turkey (May 17,2019 and after)
South Korea
South Africa
Brazil
Greece
Italy
Oman
Germany
United States
International Trade Commission
I
December 2019Publication Number: 5008
United States International Trade Commission
Commissioners
David S. Johanson, Chairman
Irving A. Williamson
Rhonda K. Schmidtlein
Jason E. Kearns
Randolph J. Stayin
Amy A. Karpel
Catherine DeFilippoDirector, Office of Operations
James R. HolbeinDirector, Office of Tariff Affairs and Trade
Agreements
Address all communications to
United States International Trade Commission
Washington, DC20436
United States International Trade Commission
Harmonized TariffSchedule of the UnitedStates 2019Revision 20
For Use in Classification of ImportedMerchandise for Rate of DUW andStatistical Purposes
United States International Trade Commission
Project Leader
Janet E. Freas, HTS Project Manager
Principal Authors
Aru n Butcher, Attorney-Advisor
Barba ra E. Elkins, Attorney-Advisor
Leticia Johnson, Program Support Specialist
Ryan Kane, lnternational Trade Analyst
Vanessa Lee, Nomenclature Analyst
Manjola Mancka, Nomenclature Analyst
Linda Powell, Nomenclature Analyst
Donnette R Rimmer, N omenclature Analyst
Daniel P. Shepherdson, Attorney-Advisor
Janis L. Summers, Attorney-Advisor
Cynthia S. Wilson, Nomenclature Analyst
Under the direction ofJames R. Holbein, Director
For further information see
https ://www. u sitc. gov/ta rift_affa i rs/hts-h e I p
Harmonized Tariff Schedule of the United States (2019) Revision 20Annotated lor Slatistical Report¡ng Purposes
GN p.3
General Notes 2
2 Customs Territory of the United States. The term "customs territory ol the United States", as used in the tariff schedule, includes only
the States, lhe Distr¡ct of Columbia and Puerto Rico.
Rates of Duty. The rates of duly in the "Rates of Duty" columns designaled 1 ("General" and "Special") and 2 of the tarifl schedule applyto goods imported into the customs lerr¡tory of the United Slates as hereinafter provided in lhis note:
(a) Rate of Duty Column 1.
(i) Except as provided in subparagraph (iv) of this paragraph, lhe rates of duty in column 1 are rales which are applicable lo allproducts other than those of countries enumerated in paragraph (b) of lhis note. Column 1 is divided into two subcolumns,"General" and "Special", which are applicable as provided below.
(ii) The "General" subcolumn sets forth the general or normal lrade relat¡ons (NTR) rates which are applicable to products of thosecounlries described in subparagraph (i) above which are not entitled to special tar¡fl treatment as set lorth below.
(iii) The "special" subcolumn reflects rates of duty under one or more special tariff trealment programs described in paragraph (c)
ol this note and identified in parentheses immediately lollowing lhe duty rate spec¡lied in such subcolumn. These rates applyto those products which are properly classified under a provision for which a speclal rate is indicated and for wh¡ch all of thelegal requirements for eligibility for such program or programs have been met. Where a producl is eligible lor special treatmenlunder more than one program, the lowest rate of duty provided for any applicable program shall be imposed. Where no specialrate of duty is provided for a provision, or where lhe country from which a product otherwise eligible for special trealment wasimported is not des¡gnated as a beneficiary country under a program appearing with the appropriate provision, the rates of
duty in the "General" subcolumn of column 1 shall apply.
(¡v) Products of lnsular Possess¡ons.
(A) Except as provided in additional U.S. note 5 of chapter 91 and except as prov¡ded in add¡tional U.S. note 2 of chapter96, and except as provided in section 423 of the Tax Reform Acl of 1 986, and additional U.S. note 3(e) of chapter 71 ,
goods imported from insular possessions of the United States which are outside the cusloms terr¡tory of the United Slatesare subject to the rates of duty set forth in column l ol the tarifl schedule, except that all such goods the growth oI producl
ol any such possession, or manufactured or produced in any such possession lrom materials lhe growth, product ormanufacture of any such possession or ol the customs territory of the United States, or of both, which do not conlainloreign mater¡als to the value of more lhan 70 percent of their lotal value (or more than 50 percent ol lheir total value withrespect to goods described in section 213(b) of the Caribbean Basin Economic Recovery Act), coming to the customsterr¡tory of the Un¡ted Stales directly from any such possession, and all goods previously imported into the cuslomsterr¡tory of the Un¡ted States with payment of all applicable duties and taxes imposed upon or by reason of imporlationwhich were shipped lrom the Un¡ted States, without remission, refund or drawback of such duties or taxes, d¡reclly to thepossession from which they are being returned by direct shipment, are exempt lrom duty.
(B) ln determining whether goods produced or manufaclured in any such insular possession conlain fore¡gn mater¡als lo thevalue of more than 70 percenl, no material shall be considered loreign which either--
(1) al the time such goods are entered, or
(21 at the lime such material is imported into the insular possession,
may be ¡mported ¡nto the customs terr¡lory from a foreign country, and entered free of duty;excepl that no goods conlainingmaterial to which (2) of this subparagraph applies shall be exempl from duty under subparagraph (A) unless adequaledocumenlalion is supplied to show that the material has been incorporated ¡nto such goods during the 18-monlh period
alter the date on which such material is imported into the insular possession.
(C) Subject to the limitations imposed under seclions 503(aX2), 503(aXg) and 503(c) ol the Trade Act ol 1974, goods
designated as eligible under section 503 of such Act which are imported from an insular possession ol the United Slatesshall receive duty lrealment no less favorable lhan the treatment alforded such goods imported from a beneliciarydeveloping counlry under l¡lle V of such Act.
(D) Sub¡ect to lhe provisions in section 213 of the Caribbean Basin Economic Recovery Act, goods which are imported frominsular possessions of the United States shall receive duty treatmenl no less lavorable than the treatmenl allorded suchgoods when they are ¡mported from a beneliciary country under such Act.
3
Harmonized Tariff Schedule of the United States (2019) Revision 20Annotated for Statistical Reporting Purposes
GN p.5
General Note 3
(ll) when not included in the manufacturer's actual cost for the materials, lhe freight, insurance, packing and all
other costs incurred ¡n transport¡ng the materials to the manufacturer's planl;
(lll) lhe actual cost ol wasle or spoilage, less the value of recoverable scrap; and
(lV) taxes or dut¡es ¡mposed on the mater¡als by the West Bank, the Gaza Strip or a qualilying industrial zone, if
such taxes are not remilted on exporlal¡on.
(2) lf a material is provided to the manufacturer wilhout charge, or at less than lair market value, its cost or value shall
be determined by computing the sum o!-
(l) all expenses incurred in the growth, production or manulacturer of the material, including general expenses;
(ll) an amounl for profiü and
(lll) freight, insurance, packing and all other costs incurred in transporting the material to the manufacturels plant.
(3) ll the informat¡on necessary to compute the cost or value ol a material is not available, the Cusloms Service may
ascertain or estimate the value thereof using all reasonable methods.
(E) (1) For purposes of this paragraph, the "dlrect costs of processing operations perlormed in the Wesl Bank. the Gaza
Strip or a qualifying industrial zone" with respect to an article are lhose costs either directly incurred in, or which canbe reasonably allocated to, the growth, produclion, manufacture or assembly of that arlicle. Such costs include, butare nol limited to, the following to the extent that they are includible in the appraised value of arlicles ¡mporled ¡nto
the United States;
(l) All aclual labor costs involved in lhe growlh, production, manufacture or assembly of the article, includ¡ng lringebenefits, on-the-job training and costs of engineer¡ng, supervisor¡ quality conttol and similar personnel;
(ll) Dies, molds, tooling and depreciation on machinery and equipment which are allocable to such articles;
(lll) Research, development, design, engineering and blueptint cosls insofar as they are allocable to such articles;and
(lV) Costs ol inspecting and testing such articles
(2) Those items that are not included as direct costs of processing operations with respect to an art¡cle are those whichare not directly attributable to the article or are not costs of manufacturing the art¡cle. Such ilems include, but arenot l¡mited to--
(l) profit; and
(ll) general expenses of doing business which are either not allocable to lhe article or are not related to the growth,produclion, manufaclure or assembly ol the arlicle, such as adminislrative salaries, casualty and liabilityinsurance, advertising and salesmen's salaries, commissions or expenses.
(F) Whenever articles are entered with a claim lor the duty exemption provided in this paragraph--
(1) the importer shall be deemed to certily that such articles meet all of the condit¡ons lor duty exemption;and
(2) when requested by the Customs Service, the importer, manulacturer or exporter submits a declaration setting forthall pertinent ¡nformation w¡th respect to such articles, including lhe following:
(l) A description of such articles, quant¡ties, numbers and marks of packages, invoice numbers and bills of lading;
(ll) A description of the operalions performed in the production ol such art¡cles in the West Bank, the Gaza Strip,a qualifying industrial zone or lsrael and an identilication of the direct costs ol processing operations;
HarmonizedTariff Schedule of the United States (2019) Revision 20Annotated for Statislìcal Reporling Purposes
GN p.6
General Note 3
(lll) A description of the malerials used in the production ol such articles which are wholly the growth, ploduct or
manulaclure of the West Bank, the Gaza Strip, a qualifying industrial zone, lsrael or the Un¡ted Stales, and astalement as lo lhe cosl or value ol such materials;
(lV) A description of the operations perlormed on, and a statemenl as to the origin and cost or value of, any foreign
malerials used in such articles which are claimed to have been sulficienlly processed in the West Bank, lheGaza Strip, a qualilying industr¡al zone or lsrael so as to be mater¡als produced ¡n the West Bank, the Gaza
Slrip, a qualilying industr¡al zone or lsrael;and
(V) A descript¡on of the origin and cosl or value of any foreign materials used in the article which have not been
substantially transformed ¡n the West Bank, the Gaza Strip or a qualilying industrial zone.
(G) For the purposes ol this paragraph, a "qualifying industrial zone" means any area thal--
(1) encompasses portions of the territory of lsrael and Jordan or lsrael and Egypt;
(2) has been designated by local aulhorities as an enclave where merchandise may enter without payment of duly orexcise laxes; and
(3) has been designated by the United States Trade Represenlative in a nolice published in the EeçlefA[ Regisler as aqualifying industrial zone.
(b) Rate of Duty Column 2. Notwithstand¡ng any ol the foregoing provisions of this note, the rates of duty shown in column 2 shall apply
to products, whether imporled directly or indirectly, ol the lollowing counlr¡es and areas pursuant to section 401 of the Tarifl
Classilication Acl of 1 962, to section 231 or 257(e)(2) ol the Trade Expansion Act of 1 962, to section 404(a) of the Trade Act of
1974 or to any olher applicable section ol law, or lo action taken by the President lhereunder:
Cuba Norlh Korea
(c) Products Eligible for Special Tariff Treatment. 1/
(i) Programs under which special tarilf treatment may be provided, and the corresponding symbols lor such programs as they
are indicated in the "Special" subcolumn, are as follows:
Generalized System ol PreferencesUnited States-Australia Free Ïade Agreemenl.Automotive Products Trade Act..United States-Bahrain F¡ee Trade Agreement lmplementalion Act'..Agreement on Trade in Civil Aircralt...Norlh American F¡ee Trade Agreement:
Goods ol Canada, under lhe terms ol general note 12 to this schedule.Goods ol Mexico, under the terms ol general note 12 to this schedule..
...4, A'or A+
...4U
...8,.,8H...c
...c4
.,.MX
...cLUnited States-Chile Free Trade Agreement..
United Slates-lsrael Free Trade Area IL
United States-Jordan Free Trade Area lmplementation Acl'. .JO
Agreement on Trade in Pharmaceutical Products.. K
Dominican Republic-Central America-United Stales Free Trade Agreement lmplementationAct PorP+
Uruguay Round Concessions on lnlermediate Chemicals for Dyes.........'.....'..'.."....'...."'...'.LUnited States-Caribbean Basin Trade Partnership Act.'....'."...'...'. .'.'......'......RUn¡ted States-Mo¡occo Free Trade Agreement lmplementalion Act... ,MAUnited Slates-Singapore Free Trade Agreemenl...... ..'..".".."'SGUnited slates-Oman Free Trade Agreement lmplemenlat¡on Act".'......... ".....OMUnited Stales-Peru Trade Promotion Agreement lmplementation Act.....,.........'.....................PEUnited States-Korea Free Trade Agreement lmplementation Act.............'.".,.'..'....'................KRUnited States-ColombiaTrade Promolion Agreemenl lmplementation Act."".'........"...'.....".'CO
1/ This list has not been updated for the special GSP provisions applicable to cerla¡n products of Nepal, for which lhe symbol is "NP."
Harmonized Tariff Schedule of the United States (2019) Revision 20Annotated lor Statisl¡cal Report¡ng Purposes
4. Products ol Countries Designated Beneficiary Developing Countries for Purposes of the Generalized System ol Prelerences (GSP)
(a) The following countries, territories and associat¡ons ol countries eligible for treatment as one country (pursuant to section 507(2)
of the Trade Act of 1974 (19 U.S.C. 2467(2)) are designaled beneficiary developing countries lor the purposes of the Generalized
Syslem of Preferences, provided for in Title V of lhe Trade Act of 1974, as amended (1 9 U.S.C. 2461 et seq.):
lndependent Countries
GN p.11
GSP
AfghanistanAlbaniaAlgeriaAngolaArgenlinaArmeniaAzerbaijanBelizeBeninBhulanBoliviaBosnia and
HercegovinaBotswanaBrazilBurkina FasoBurmaBurundiCôte d'lvoireCambodiaCameroonGape VerdeCenlral African
RepublicChadGomorosCongo (Brazzaville)Congo (Kinshasa)DjiboutiDominicaEcuadorEsyptEritreaEswaliniEthiopiaFiji
GabonGambia, TheGeorgiaGhanaGrenadaGuineaGuinea-BissauGuyanaHaitilndonesialraqJamaicaJordanKazakhstanKenyaKiribatiKosovoKyrgyzstanLebanonLesolhoLiberiaMadagascarMalawiMaldivesMaliMauritaniaMauritiusMoldovaMongoliaMontenegroMozambiqueNamibiaNepalNigerNigeriaNorth Macedonia
PakistanPapua New GuineaParaguayPhilippinesRepublic of YemenRwandaSaint LuciaSaint Vincent and the
GrenadinesSamoaSao Tomé and
PrincipeSenegalSerbiaSierra LeoneSolomon lslandsSomaliaSouth AlricaSouth SudanSri LankaSurinameTanzaniaThailandTimor-LesteTogoTongaTunisiaTuvaluUgandaUkraineUzbekistanVanualuZambiaZimbabwe
GN p.12
GSP
Harmonized Tariff Schedule of the United States (2019) Revision 20Annotated lor Stat¡stical Reporting Purposes
Non-lndeoendent Countries and Territories
AnguillaBritish lndian Ocean
TerritoryChristmas lsland
(Australia)Cocqs (Keeling)
lslandsCook lslands
Member Countr¡es of theCartagena Agreement
(Andean Group)
Consisting of:
BoliviaEcuador
Falkland lslands (lslasMalvinas)
Heard lsland andMcDonald lslands
MontserralNiueNorlolk lslandPitcairn lslands
Associations ol Countries ltreated as one countrv)
Member Countries ol lhe WestAfrican Economic and
Monetarv Union IWAEMU)
Consisting of:
BeninBurkina FasoCôte d'lvoireGuinea-BissauMaliNigerSenegalTogo
Member Countries ol the SouthAsian Associalion fo¡Regional Cooperation
(SAARC)
Cunently qualifying
AfghanislanBhutanMaldivesNepalPakistanSri Lanka
Member Countries of theAssociation of South EastAsian Nations (ASEAN)
Currently qualifying
BurmaCambodialndonesiaPhilippinesThailand
Saint HelenaTokelauVirgin lslands, BritishWallis and FutunaWesl Bank and Gaza
SlripWestern Sahara
Member Countries ol lheSouthern Alrica Development
Community (SADCì
Cunently qualifying
BolswanaMauritiusTanzania
Member Countries ol theCaribbean Common Market
(cARrcoM)
Currently qualifying
BelizeDominicaGrenadaGuyanaJamaicaMontserratSaint LuciaSaint Vincent and the
Grenadines
Harmonized Tariff Schedule of the United States (2019) Revision 20Annotaled lor Statistical Repotting Purposes
(b) (i) The following beneficiary counlries are designated as leasl-developed beneficiary developing countries pursuant to section
502(aX2) of the Trade Act of 1 974, as amended:
Afghan¡stan Congo Mali SomaliaAngola (Kinshasa) Mauritania South SudanBenin Djibouli Mozambique TanzaniaBhutan Elhiopia NePal The SolomonBurkina Faso Gambia, The Niget lslandsBurma Guinea Republic of Timot-LesteBurundi Guinea-Bissau Yemen Togo
Cambodia Haiti Rwanda Tuvalu
Central African Kiribati Samoa UgandaRepublic Lesotho SaoTomé and Vanuatu
Chad Liberia PrinciPe ZambiaGomoros Madagascar Senegal
Malawi Sierra Leone
Whenever an eligible article which is the growth, product or manufacture ol one ol the countries designated as a least-developed
beneficiary developing country is imported inlo the customs terr¡tory ol the Un¡led States directly lrom such country, such
article shall be entitled to receive the duty{ree treatment provided lor in subdivision (c) of this noto without regard to the
limitations on preterential lrealmenl ol eligible articles in section 503(c)(2)(A) of lhe Trade Act, as amended (19 U.S.C.2463(c)(2)(A)).
(ii) Articles provided for in a provision for which a rate of duty "Free" appears in the "Special" subcolumn followed by the symbol
"A+" in parentheses are those designated by the President to be eligible articles lor purposes of lhe GSP pursuant to section
503(aXl XB) of the Trade Act of 1974, as amended. The symbol "A+" indlcates that all least-developed beneficiary countriesare eligible lor preferential treatment with respect to all articles provided for in the deslgnated provisions. Whenever an eligible
article which is the growth, product, or manufaclure ol a designated least-developed developing country listed in subdlvision(b)(i) of this note is imported into the customs territory of the United States d¡rectly from such country, such article shall be
eligible for duly-free trealment as set forth in the "Special" subcolumn;provided that, in accordance with regulalions promulgated
by the Secrelary ol the Treasury the sum of (1 ) the cosl or value ol the materials produced in the leasþdeveloped beneficiarydeveloping country or 2 or more counlries which are members of the same assoc¡ation of countries which is trealed as onecountry under secl¡on 507(2) of theTrade Act of 1974, plus (2) lhe direct cosls ol processing operat¡ons performed in such
least-developed beneficiary developing country or such members counlries, is nol less than 35 percent of lhe appraised value
of such arlicle at the time ol its entry ¡nto the customs territory of lhe Uniled States. No article or mater¡al of a least-developedbeneliciary developing country shall be eligible for such treatment by virtue of having merely undergone simple combining orpacking operations, or mere dilution with waler or mere dilution with another substance that does not materially alter lhecharacterislics of the article.
(c) Art¡cles provided for in a provision lor which a rate ol duty ol "Free" appears in the "special" subcoluPnn followed by the symbols"4" or "A'" in parenlheses are those designated by the President to be eligible articles lor purposes of the GSP pursuant lo section
503 ol lhe Trade Act ol 1974. The lollowing arlicles may not be designated as an eligible arlicle for purposes of the GSP:
(i) textile and apparel articles which were not eligible articles for purposes of this note on January 1, 1994;
(ii) watches, except as determined by lhe President pursuant to section 503(cX1XB) of the Trade Act of 1974, as amended;
(i¡¡) import-sensitive electronic articles;
(iv) imporl-sens¡tivesteel articles;
(v) loolwear, handbags, luggage, flat goods, work gloves and leather wearing apparel, lhe foregoing which were not elig¡ble articleslor purposes of the GSP on April 1 , 1984;
(vi) import-sensitive semimanufactured and manufactured glass products;
(vii) any agricultural producl of chapters 2 through 52, inclusive, that is sub¡ect to a tarifl-rate quota, ¡l entered in a quantity in excess
of the in-quota quanlity lor such producl; and
(viii) any other articles which the President delermines to be import-sensitive in the context ol the GSP.
GN p.13
GSP
Harmonized Tariff Schedule of the United States (2019) Revision 20Annolated for Statistlcal Reporting Purposes
GN p.16
GSP
3907.61.00
3907.69.00
3907.70.003907.99.203907.99.503909.1 0.003909.50.503913.90.203920.62.003921.90.503923.21.003923.90.004011.10.10
401 1.10.50401 1 .20.1 0
401 1.20.504012.12.804012.90.454101.90.404104.41 .5041 07.1 1 .804r 07.19.504107.99.804201.00.604303.1 0.004409.22.054409.29.06441 1 .1 2.90441 2.1 0.05
Argentina;lndonesia;Thailand
Argentina;lndonesia;Thailand
ArgentinaArgent¡naArgentinaArgentinaArgent¡naArgentinaThailandArgent¡naThailandArgentinaArgentina;
Brazil;lndonesia;Thailand;Ukraine
BrazilBrazil;
ThailandBrazilJordanBrazilBrazilBrazilArgenlinaBrazllBrazilArgentinaArgentinaBrazilB¡azilBrazilBrazil;
EcuadorBrazillndonesialndonesiaBrazil;
lndonesialndonesiaBrazil;
lndonesiaBrazilBrazilBrazilBtazilBrazilBtazilBrazilBrazil;
lndonesiaBrazil;
Ecuador;lndonesia
Ecuador
4412.94.904412.99.31
4412.99.41
GuyanaBrazil;
lndonesiaBrazil;
Ecuador;lndonesia
EcuadorGuyanaBrazilBrazil;
lndonesia;Thailand
BrazilBrazil;
lndonesiaBrazilBrazil;
lndonesiaBraz¡lBrazil;
lndonesiaBrazilBraz¡lB¡azilBrazilBrazilThe
PhilippinesThe
PhilippinesUkraineBrazilBrazilThailandThailandThailandThailandThailandBrazilArgentina;
BrazilBrazilBrazilArgent¡naBrazilThailandThailandArgent¡naBrazilArgenl¡na;
BrazllArgentina;
BrazllBrazilKazakhstanBrazilB¡azilBrazilBrazilBrazil
731s.90.007403.11.007407.21.907408.1 1 .607403.1 9.007408.19.007409.11.507409.21.007606.12.307614.10.507615.10.307901 .11.007901 .12.50
8112.19.008207.20.008402.1 2.008408.20.208408.20.908409.91.50
8409.91.998409.99.91
8410.13.008413.30.108443.11.108450.20.008450.90.208456.1 2.908477.51 .008480.30.008481 .30.208481.80.308481 .80.908481 .90.308503.00.658503.00.958504.40.958504.50.808516.71 .008516.79.008518.29.808518.50.008528.72.648s36.90.608536.90.858538.90.818543.70.428543.70.958544.30.008702.10.31
8708.30.508708.40.508708.40.758708.50.658708.50.898708.50.918708.50.99
ArgentinaKazakhstanBrazilBrazilBrazilBrazilArgentinaArgentinalndonesiaEcuadorThailandArgentihaArgenlina;
KazakhstanKazakhstanArgenlinalndonesiaBrazilBrazilArgentina;
BrazilArgenlinaArgenlina;
BrazilBrazilBrazilThailandThailandEcuadorUkraineArgentinaArgentinaArgenlinaArgentinaArgentinaArgentinaArgent¡naBrazilUkraineUkraineUkraineUkraineUkraineUkraineThailandArgentinaArgentinaArgent¡naUkraineUkralnePhilippinesNorth
MacedoniaBrazilBrazilBrazilArgentinaBrazilArgentinaBrazil
44r 2.99.804412.99.904418.60.004418.73.30
4418.73.404418.73.70
4418.73.904418.74.90
4418.75.404418.75.70
4418.79.014418.91 .904418.99.904421 .91.604421.99.604602.19.23
s607.90.35
4412.31.264412.31.424412.31.484412.31 .52
61 1 ô.1 0.086802.93.006802.99.006907.21.306907.22.306907.23.306S07.30.306907.40.306910.10.006910.90.00
6911.90.006912.00.447007.1 1.007106.92.507113.11.5071 13.19.5071 14.1 1.607202.21.107202.21.50
4412.31.614412.31 .92
4412.33.264412.33.324412.33.574412.34.264412.34.324412.34.574412.39.404412.94.31
4412.94.41
7202.30.00
7202.11.107202.41.007202.93.807202.99.107307.21.507307.91.307307.91.504412.94.80
Harmonized Tariff Schedule of the United States (2019) Revision 20Annotated for Stat¡stical Reporting Purposes
CHAPTER 76
ALUMINUM AND ARTICLES THEREOFXV
76-1
Note
1. ln this chapter the following expressions have the meanings hereby assigned to them:
(a) Bars and rods
Rolled, extruded, drawn or forged products, not in coils, which have a uniform solid cross section along their whole length in
the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including "flattened
circles" and "modified rectangles", of which two opposite sides are convex arcs, the other two sides being straight, of equal
length and parallel). Products with a rectangular (including square), triangular or polygonal cross section may have corners
rounded along their whole length. The thickness of such products which have a rectangular (including "modified rectangular")
cross sectionèxceeds onetenth of the width. The expression also covers cast or sintered products, of the same forms and
dimensions, which have been subsequently worked after production (otherwise than by simple trimming or descaling), provided
that they have not thereby assumed the character of articles or products of other headings.
(b) Profiles
Rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform cross section along their whole length, which
do not conform to any of the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes or pipes. The expression also
covers cast or sintered products, of the same forms, which have been subsequently worked after production (otherwise than
by simple trimming or descaling), provided that they have not thereby assumed the character of articles or products of other
headings.
(c) Wire
Rolled, extruded or drawn products, in coils, which have a uniform solid cross section along their whole length in the shape
of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including "flattened oircles"
and "modified rectangles", of which two oppos¡te sides are convex arcs, the other two sides being straight, of equal length
and parallel). Products with a rectangular (including square), triangular or polygonal cross section may have corners rounded
along their whole length. The thickness of such products which have a rectangular (including "modified rectangular'') cross
section exceeds one{enth of the width.
(d) Plates. sheets. strip and foil
Flat-surfaced products (other than the unwrought products of heading 7601), coiled or not, of solid rectangular (other than
square) cross section with orwithout rounded corners (including "modified rectangles" of which two opposite sides are convex
arcs, the other two sides being straight, of equal length and parallel) of a uniform thickness, which are:
- of rectangular (including square) shape with a thickness not exceeding one{enth of the width,
- of a shape other than rectangular or square, of any size, provided that they do not assume the character of articles orproducts of other headings.
Headings 7606 and 7607 apply, inter alia , to plates, sheets, strip and foil with patterns (for example, grooves, ribs, checkers,
tears, buttons, lozenges) and to such products which have been perforated, corrugated, polished or coated, provided that
they do not thereby assume the character of articles or products of other headings.
(e) Tubes and pipes
Hollow products, coiled or not, which have a uniform cross section with only one enclosed void along theirwhole length in
the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons, and which have
a uniform wall thickness. Products with a rectangular (including square), equilateral triangular or regular convex polygonal
cross section, which may have corners rounded along theirwhole length, are also to be considered as tubes and pipes
provided the inner and outer cross sections are concentric and have the same form and orientation. Tubes and pipes of the
foregoing crosssections may be polished, coated, bent, threaded, drilled, waisted, expanded, cone-shaped orf¡ttedwithflanges, collars or rings.
Subheading Notes
1. ln this chapter the following expressions have the meanings hereby assigned to them:
Harmonized Tariff Schedule of the United States (2019) Revision 20Annotated for Stat¡stical Reporting Purposes
XV76-2
Subheading Notes (con.)
(a) Aluminum. not alloyed
Metal containing by weight at least 99 percent of aluminum, provided that the content by weight of any other element doesnot exceed the limit specified in the following table:
TABLE - Other elements
Element Limiting content percent byweight
Fe + Si (iron plus silicon)
other elements (t).
each
1
0.1 (2)
(t)Other elements are, for example, Cr, Cu, Mg, Mn, Ni, Zn
e) Copper is permitted in a proportion greater than 0.1 percent but not more than0.2 percent, provided that neither the chromium nor manganese content exceeds0.05 percent.
(b) Aluminum alloys
Metallic substances in which aluminum predominates by weight over each of the other elements, provided that:
(i) The content by weight of at least one of the other elements or of iron plus silicon taken together is greater than the limitspecified in the foregoing table; or
(¡¡) The total content by weight of such other elements exceeds 1 percent.
2 Notwithstanding the provisions of chapter note 1 (c), for the purposes of subheading 7616.91 the term "vrirg" applies only toproducts, whether or not in coils, of any cross-sectional shape, of which no cross-sectional dimension exceeds 6 mm.
Additional U.S. Note
For the purposes of heading 7608, the rate of duty "Free (C)" appearing in the "Special" subcolumn applies only to tubes andpipes with attached fittings, suitable for conducting gases or liquids.
Statistical Notes
For the purposes of this chapter, the term "aluminum vanadium master alloy" refers to aluminum alloys which contain by weight 20 percentor more of vanadium.
2. For the purposes of this chapter, the term "aluminum can stock" refers to sheets and strip in coils, of alloys of aluminum in which eithermanganese or magnesium is the predominant alloying element, not painted, over 0.175 mm but not over 0.432 mm in thickness, and over254 mm in width, comprising "body stock and "lid stock" as specified below:
(a) The term "body stock" refers to aluminum can stock having manganese as the predominant alloying element and having a minimumtensile strength oÍ 262 MPa; and
(b) The term "lid stock" refers to aluminum can stock having magnesium as the predominant alloying element and having a minimum tensilestrength of 345 MPa.
3. For the purposes of statistical reporting number 7601 .20.9080, "sheet ingot" (slabs) refers to aluminum alloys with a rectangular cross-sectionsuitable to be manufactured into other products.
For the purposes of statistical reporting number 7601.20.9085, "foundry ingot" refers to large castings of aluminum alloys of various shapesother than sheets or slabs to be melted for further processing.
5. Forthe purposes of stat¡stical reporting numbers 7604.29.3030,7604.29.5020 and 7606.12.3015, "high-strength heat-treatable alloys" refersto aluminum containing by weight 7.0 percent or less of copper or 10.0 percent or less of zinc, and/or designated as series 2xxx and Txxx(except 7072) in the Aluminum Association's specifications of registered alloys.
t.
4
Harmonized Tariff Schedule of the United States (2019) Revision 20Annotated for Statist¡cal Reporting Purposes
Statistical Notes (con.)
6. For the purposes of statistical reporting numbers 7604.29.3060, 7604.29.5050 and 7606.12.3025, "heat-treatable industrial alloys" refers toaluminum containing by weight 3.0 percent or less of magnesium and 3.0 or less of silicon, and/or are designated as series 6xxx in theAluminum Association's specìfications of registered alloys.
XV76-3
1
General Soeclal2
un¡tof
Quantity
Heading/Subheading Article Descr¡ption
fix
Harmonized Tariff Schedule of the United States (2019) Revision 20Annotated for Statistical Reporting Pu[poses
XV76-6
Aluminum wire:Of aluminum, not alloyed:
Of which the maximum cross-sectional dimension11.00 00
19.00 00
.00 00
00
2.6/.1!
k9........ 4.2o/o!
Free (4, AU, BH,cA, cL, co, D, E,
IL, JO, KR, MA,MX, OM, P, PA,PE, SG)
Free (4, AU, BH,cA, cL, co, D, E,
IL, JO, MA, MX,OM, P, PA, PE,
SG)0.8% (KR)
Free (4, AU, BH,cA, cL, co, D, E,
IL, JO, KR, MA,MX, OM, P, PA,PE, SG)
Free (4, AU, BH,cA, cL, co, D, E,
IL, JO, MA, MX,OM, P, PA, PE,SG)
0.8% (KR)
Free (4, AU, BH,cA, cL, co, D, E,
IL, JO, KR, MA,MX, OM, P, PA,PE, SG)
Free (4, AU, BH,cA, cL, co, D, E,
IL, JO, KR, MA,MX, OM, P, PA,PE, SG)
11%
25Yo
11%
25%
13.5%
9.5%
Other
Of aluminum alloys:Of which the maximum cross-sectional dimension
Other
plates, sheets and strip, of a thickness exceeding
k9............
2.61o!
3o/o!
0.2 mm:Rectangular (including square):
Of aluminum, not alloyed:11
11.30
30
6011.60 00
Not clad...
With a thickness of more than 6.3 mm............
With a thickness of 6.3 mm or less..................C1ad................
kg
kgkg........ 2.7'/"1!
unitof
Quant¡ty
Head¡ng/Subheading
fixArt¡cle Description
Harmonized Tariff Schedule of the United States (2019) Revision 20Annotated for Stat¡st¡cal Reporting Purposes
XV76-7
(con.)
1212.30
't2.60
1
1.30
1.60
15
25
35
45
559000
Aluminum plates, sheets and strip, of a thickness exceeding0.2 mm: (con.)
Rectangular (including square): (con.)
Of aluminum alloys:Not c|ad..........
With a thickness of more than 6.3 mm:High-strength heaþtreatable alloys of akind described in statistical note 5 to thischapter...........
Heaþtreatable industrial alloys of a kinddescribed in statistical note 6 to thischapter...........
Other...............With a thickness of 6.3 mm or less:
Aluminum can stock:Body stock.....
Clad
Other:Of aluminum, not alloyed:
With a thickness of more than 6.3 mm..........
With a thickness of 6.3 mm or |ess................
Clad
With a thicknesò of more than 6.3 mm............ kg
With a thickness of 6.3 mm or |ess.................. kgOf aluminum alloys:
With a thickness of more than 6.3 mm........... kg
kg
kg
kgkgks..........
gY"1J
6.5Y.1J
Free (A*, AU, BH,cA, cL, co, D, E,
IL, JO, KR, MA,MX, OM, P, PA,PE, SG)
Free (A, AU, BH,cA, cL, co, D, E,
IL, JO, MA, MX,OM, P, PA, PE,SG)
1.3% (KR)
Free (4, AU, BH,cA, cL, co, D, E,
IL, JO, KR, MA,MX, OM, P, PA,PE, SG)
Free (A, AU, BH,cA, cL, co, D, E,
IL, JO, KR, MA,MX, OM, P, PA,PE, SG)
Free (4, AU, BH,cA, cL, co, D, E,
IL, JO, MA, MX,OM, P, PA, PE,
SG)0.6% (KR)
Free (4, AU, BH,cA, cL, co, D, E,
IL, JO, MA, MX,OM, P, PA, PE,
SG)1.3% (KR)
13.5o/"
30%
13.5%
9.5%
13.50/o
kg
kg
55
95
kg
kg
3/o!
2.7y"1!
gYol!92.30
55
95
25
35
55
95
With a thickness of more than 6.3 mm...... kg
kg
92.60
With a thickness of 6.3 mm or 1ess........... kg
6.5o/"1! 3Oo/"
Attachment IU.S. Interest Rates
Series DescriptionAverage majority prime rate charged by banks on short-term loans tobusiness, quoted on an investment basis
Percent: Per Year
H 1slH 1slRTFSPBLP_N.M
RIFSPBLP N.M
Unit:
Multiplier:Currency:
Unique ldentifier:Time Period
2019-01
20L9-O2
2019-03
2079-04
2019-052019-06
20L9-O7
2019-08
2019-09
2019-10
2019-71
20L9-t2Average
L
NA
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.2s
5.15
4.99
4.75
4.75
Source: https://www.federalreserve.gov/dotodownlood/Choose.ospx?rel=H75
5.28%
EXHIBIT AD.SI.2
Normal Value
Gommon Alloy Aluminum Sheet
Home Market Pricing
Ranged Data PUBLIC VERSION
Formula Source Attachment
Date [ ] FMR
Seller [ ] FMR
Product [ Coil ] FMR
Alloy [ ] FMR
Temper [ ] FMR
Gauge [ ] FMR
Width [ ] FMR
Length [ ] FMR
Fabrication (if quoted) [ ] a FMR
LME (if quoted) [ ] b LME AD-SI-1 Att. 2
Price EUR / MT [ ] c = (a+b) FMR
Exchange Rate EUR / USD 1.1058 d
Price USD / KG [ ] e = c * d / 1000 FMR
Delivery Terms [ ] FMR
Payment Terms [ ] FMR
Freight Rate Per kg/km 0.000079 f Doing Business AD-SI-1 Att. 4
Freight Distance Km [ ] g Map AD-SI-2
Freight Charge (if applicable) USD / KG [ ] h = f * g
Cash Discount (if applicable) USD / KG [ 0.00 ] i FMR
Net Price USD / KG [ ] j = e - h - i
Net Price USD / LB [ ] = j / 2.20462
Home Market Pricing
Slovenia
Common Alloy Aluminum Sheet
Monthly Federal Reserve Exchange Rates
Federal Reserve Economic Data
Economic Research Division
Federal Reserve Bank of St. Louis
Source: https://fred.stlouisfed.org/series/EXUSEU
Date EUR/USD USD/EUR
1/1/2019 1.1418 0.8758
2/1/2019 1.1349 0.8811
3/1/2019 1.1296 0.8853
4/1/2019 1.1234 0.8902
5/1/2019 1.1187 0.8939
6/1/2019 1.1295 0.8853
7/1/2019 1.1211 0.8920
8/1/2019 1.1129 0.8986
9/1/2019 1.1011 0.9082
10/1/2019 1.1058 0.9043
11/1/2019 1.1051 0.9049
12/1/2019 1.1114 0.8998
POI Avg. 1.1196 0.8933
EXHIBIT AD.SI.3
Ant¡dumpGa
ng Duty Marginculation
Producer (U.S. Price)
Producer (HM Price)
Alloy
NormalValue USD / kg
Conversion Factor
Circumstance of Sale Adj. (if applicable) USD / lb. t
0.454
usD / rb. I o.oo I
usD / rb. t
usD / rb. t
usD / rb. I
30.88%
Ranged Data
Price to PriceMargin of Dumping
PUBLIC VERSION
d
I e=(a*b)+c+d
r
g=e-f
6=g/f
ttt
I I
I
a
b
c
Difmer (if applicable)
NormalValue
Export Price
Margin
Margin %
I
I