05+garment inspection
TRANSCRIPT
-
8/22/2019 05+Garment Inspection
1/26
Garment Inspection
-
8/22/2019 05+Garment Inspection
2/26
Visual InspectionGeneral appearance and make-up
Measurements
Manufacturing defects
Marking, Packing-material and Mode of packing
Drawing of sample for testing
-
8/22/2019 05+Garment Inspection
3/26
Offering of the material:
The material can be offered either in loose or
packed condition.
Lot Size:A maximum of 10,000 units can be offered forInspection.In the customized Inspectionscheme,The Lot size shall be as per theCustomer protocol and/or as specified in theirScheme.
-
8/22/2019 05+Garment Inspection
4/26
Sampling plan: For visual Inspection:
Sampling Plan for Packages: Select at random 10% of the
packages subject to a minimum of 2 and maximum of 10, usingrandom table (Annexure I) for one definite type of
quality/product. In case of mixed quality/product, the
selections of packages need not be in accordance with the
random table.
More number of packages shall be opened to cover the sample
size, all the products, quality, style, size, design / colour etc.
Sampling Plan for units: The sample size for visual Inspection
from the selected packages or from the lot offered in loose
condition shall be arrived as per the Tables 1 and 2-A of ISO
2859-1: 1999 (E) General Inspection Level II.
The sample selected shall cover all products, quality,
design/colour, style, size, etc. representing the Lot.
-
8/22/2019 05+Garment Inspection
5/26
Inspection for Measurements and Make-up: In case of approved sample, the sample selected for
Inspection shall be compared with the approved
sample/s for characteristics specified by the client.
Minimum of 3 units in each size shall be selected
product-wise for measurement and make-up from the
samples so selected.
-
8/22/2019 05+Garment Inspection
6/26
Measurement - RMG
-
8/22/2019 05+Garment Inspection
7/26
Criteria for Visual Inspection:
Reckoning of flaws/defects of the Garments
shall be carried out as per clients specified
requirements.
Depending upon the magnitude of the defect,
the defects are classified as major or minor.
-
8/22/2019 05+Garment Inspection
8/26
Various Garment Defects1. Fabric Defects:
Slub, Gout, Knot, colored flecks, Broken filaments, Bar, Slubby
weft, Weft crack, Broken pattern. Float, Oil or other stain, Missing/
Loose/ Tight / Broken ends or picks ,Defective piles/raising ,
Processing defect , Any other fabric defect .
2. Fabrication Defects:
2.1 Component and assemblyDefects :Wrong grain line,
Component part omitted or not as specified , Component parttwisted, distorted, pleated, tight or loose , Assymetricity between
shoulder seam (right & left) or collar tops or sleeves and the like.
-
8/22/2019 05+Garment Inspection
9/26
2.2 Seams and stitching Defects:
Missed stitching (except hem), Open seam on hems, Open seam onother than hems , Thread break not backstitched , Seam puckered or
twisted etc.2.3 Shade, Colour and Colour combinations :
Parts shaded or off shaded , Fuzziness (Hairiness) , Missing colouretc.
2.4 Labels or Tags :Wrong , Insecurely attached/ Misplaced etc.
2.5 Pocket Defects:
Improper location , Poorly shaped/ Crookedly set/ Not of specified
size and shape , Not laying flat , Not back tacked/ bar tacked etc.2.6 Pressing :
Burned or scorched , Stretched or distorted , Improper pressing orfolding etc.
-
8/22/2019 05+Garment Inspection
10/26
2.7 Buttons and button holes/ Zipper/ Velcro/ Press stud/ Hooks/
Trimmings/ Accessories :
Not aligned , Closures Missing , Incomplete/Insecurely sewn/not
properly locked , Not of specified size, type or colour
2.8 Embroidery/ Embellishment :
Missing/ misplaced/ off shade/damaged, etc.
2.9 Miscellaneous Defects :Hole, Cut or Tear , Any other defect not specified above etc.
-
8/22/2019 05+Garment Inspection
11/26
FABRICATION/MAKE UP DEFECTS
o Size variation
o Cutting Defects
o Stitching Defectso Misalignment of parts
o Nonalignment of Button
&Buttonholes
Label Defect
Wrong tag/Sticker
DefectiveEmbellishment
Embroidery Defects
Defective packing
C i i f f i i
-
8/22/2019 05+Garment Inspection
12/26
Criteria for Defective Piece:
Unless otherwise specified by the client the units shall
be considered defective for any of the followingreason: -
Deviation in the measurements that is beyond the
permissible tolerance limit as specified.
Deviations or absence of any of the make up
requirements such as color, design, style, trims and
accessories, labels, tags, sticker, bar-codes, packing
specification, etc.
Presence of more than two minor flaws.
Presence of one major flaw.
Any other defects, which make the piece unsuitable for
the purpose
-
8/22/2019 05+Garment Inspection
13/26
Rejection Criteria:If the Inspection is done in concurrence with clients specified
requirements, criteria for rejection of the material shall be as
stipulated by the client.
In absence of any specified requirement, the lot shall be
rejected for any of the following reason: -
a. General appearance
Based on the professional judgment, if the general appearances
of the garment covering aspects like unevenness of yarn,
kittiness, nepiness, reediness, feel, finish or make-up appears
to be poor.
b. Make-up
If more than 3 units are defectives due to make-up
c. Measurements
If more than 2 units are defective due to measurements.
-
8/22/2019 05+Garment Inspection
14/26
d. Defectives
As per the Table 2-A - Single Sampling Plan for
Normal Inspection (master table) at AQL 4.0 fordefectives (including make-up and measurements
defectives).
e. Marking, Packing-material and Mode of
packing:If the marking, Packing-material and Mode of
packing are not up to the mark as per the specified
requirements.
Permissible Tolerances:
The client shall specify the permissible tolerances
limits
-
8/22/2019 05+Garment Inspection
15/26
Broken Stitches - Needle Cutting
Where the thread is being broken where one seam crosses another
seam (ex: bar tacks on top of waistband stitching, seat seam on topof riser seam) resulting in stitch failure.
-
8/22/2019 05+Garment Inspection
16/26
Broken Stitches:Where thread on the stitch line is broken during stone-washing, sand
blasting, hand sanding, etc. Broken stitches must be repaired by restitching over the top of the stitch-line
-
8/22/2019 05+Garment Inspection
17/26
Unraveling Seams:
Generally occurs on 401 chain stitch seams where either the stitch
has been broken or a skipped stitch has occurred. This will cause
seam failure unless the seam is Re stitched.
-
8/22/2019 05+Garment Inspection
18/26
Restitched SeamsWhere there is a "splice" on the stitch line. If this occurs on
Topstitching, then the seam does not appear to be 1st quality
merchandise. Caused by:
Thread breaks or thread run-out during sewing; or
Cut or broken stitches during a subsequent treatment of the finished
product (I.e., stone washing).
-
8/22/2019 05+Garment Inspection
19/26
Twisted Legs:
Is where the side seam twists around to the front of the pant and
distorts the appearance of the jeans.
-
8/22/2019 05+Garment Inspection
20/26
Seam Puckering Defect
-
8/22/2019 05+Garment Inspection
21/26
Uneven Button Hole
-
8/22/2019 05+Garment Inspection
22/26
Uneven Bottoms
-
8/22/2019 05+Garment Inspection
23/26
Poor / Loose Stitching
-
8/22/2019 05+Garment Inspection
24/26
Miss Match at Seam
-
8/22/2019 05+Garment Inspection
25/26
Uneven Zipper- not covered completely
-
8/22/2019 05+Garment Inspection
26/26
Criteria for Rejection : General appearance
Make-up
Measurements
Defectives
Marking, Packing-material and Mode of packing,
Deviation in the measurements that is beyond the permissibletolerance limit as specified.
Deviations or absence of any of the make up requirements suchas color, design, style, trims and accessories, labels, tags,sticker, bar-codes, packing specification, etc.
Presence of minor flaws more than specified by clients. Presence of major flaws more than specified by clients.
Any other defects, which make the piece unsuitable for thepurpose.