Garmin Nuvi Interface

Note: All the Garmin’s with Fleet interface are similar to these images. These are from a 2595MLT and the 2555LMT

are the same screens

Note: All the Garmins with Fleet interface have the same screen.These are from a 2595MLT.

When plugging in cable from VT2600 NAV to Garmin this Dispatch icon will

appear.

After clicking the Dispatch icon this page will appear with different options.

This is what the screen will look like when the Garmin receives a message.

After clicking the message icon this screen will appear with message.

By clicking on one message it will open the message screen that looks like this.

From the message screen you can click the icon the arrow is pointing to and a new window

will open with two options.

When clicking the reply option this screen will appear.

When clicking the Use Keyboard option this screen will appear.

From here you can type a reply message that will send to the User Interface 2.0

After clicking done on the message screen this window will appear.

After clicking yes to send message the red arrow will appear, this shows you have replied

to that message.

This is what the screen looks like when the Garmin receives a new job.

After Clicking the new job icon this screen will appear.

When clicking on one job this screen will appear with the job details.

When on job details screen you can click the icon the arrow is pointing to and a new window

with options will appear.

When clicking the Edit Stop option this screen will appear.

When clicking Go! option that Garmin will start to navigate you to the job.

Garmin will show you when road splits where you should go.

This is what screen looks like when the Garmin receives a job and message.

Red Arrow= Unread messageBlue Arrow= message that was replied to

Green Arrow= Read message

Red Arrow= Read JobBlue Arrow= Unread Job

Orange Arrow= Job currently navigating toGreen Arrow= Completed Job