usersmanual en
DESCRIPTION
user manualTRANSCRIPT
-
DIgSILENT PowerFactoryVersion 15.0 BETA
User ManualVolume 1
Edition 1
DIgSILENT GmbH
Gomaringen, Germany
November 2012
-
Publisher:DIgSILENT GmbH
Heinrich-Hertz-Strae 972810 Gomaringen / Germany
Tel.: +49 (0) 7072-9168-0Fax: +49 (0) 7072-9168-88
Please visit our homepage at:http://www.digsilent.de
Copyright DIgSILENT GmbHAll rights reserved. No part of thispublication may be reproduced or
distributed in any form without permissionof the publisher.
October 2012r464
-
Contents
I General Information 1
1 About this Guide 1
1.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.2 Contents of the Users Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.3 Used Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2 Contact 1
2.1 General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2.2 Direct Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
3 Documentation and Help System 1
4 PowerFactory Overview 1
4.1 General Concept . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
4.2 Database, Objects, and Classes . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
4.3 PowerFactory Simulation Functions . . . . . . . . . . . . . . . . . . . . . . . . . 4
4.4 General Design of PowerFactory . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4.5 Type and Element Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4.6 Data Arrangement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4.6.1 Global Library . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4.6.2 Project Library . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
4.6.3 Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
4.6.4 Network Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
4.6.5 Operation Scenarios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4.6.6 Study Cases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
i
-
CONTENTS CONTENTS
4.6.7 Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4.7 Project Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4.7.1 Nodes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.7.2 Branches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.7.3 Cubicles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.7.4 Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.7.5 Substations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4.7.6 Sites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4.7.7 Branch Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4.8 User Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4.8.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4.8.2 Menu Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4.8.3 Main Toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
4.8.4 The Output Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
4.9 DIgSILENT Programming Language (DPL) Scripts . . . . . . . . . . . . . . . . . 22
II Administration 25
5 Program Administration 1
5.1 Program Installation and Configuration . . . . . . . . . . . . . . . . . . . . . . . 1
5.2 The Log-on Dialogue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
5.2.1 Log On Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
5.2.2 License Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
5.2.3 Network Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
5.2.4 Database Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
5.2.5 Advanced Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
5.2.6 Appearance Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
5.3 Housekeeping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
5.3.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
5.3.2 Configuring permanently logged-on users . . . . . . . . . . . . . . . . . 6
5.3.3 Configuring housekeeping tasks . . . . . . . . . . . . . . . . . . . . . . 7
ii
-
CONTENTS CONTENTS
5.3.4 Configuring deletion of old projects . . . . . . . . . . . . . . . . . . . . . 8
5.3.5 Configuring purging of projects . . . . . . . . . . . . . . . . . . . . . . . 9
5.3.6 Configuring emptying of recycle bins . . . . . . . . . . . . . . . . . . . . 10
5.3.7 Monitoring Housekeeping . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5.3.8 Summary of Housekeeping Deployment . . . . . . . . . . . . . . . . . . 10
6 User Accounts, User Groups, and Profiles 1
6.1 PowerFactory Database Overview . . . . . . . . . . . . . . . . . . . . . . . . . . 1
6.2 The Database Administrator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
6.3 Creating and Managing User Accounts . . . . . . . . . . . . . . . . . . . . . . . 3
6.4 Creating User Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
6.5 Creating Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
6.5.1 Tool Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
6.5.2 Configuration of Toolbars . . . . . . . . . . . . . . . . . . . . . . . . . . 7
6.5.3 Configuration of Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
6.5.4 Configuration of Dialog Pages . . . . . . . . . . . . . . . . . . . . . . . . 9
6.5.5 Configuration of Dialog Parameters . . . . . . . . . . . . . . . . . . . . . 9
6.5.6 References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
6.6 The Demo Account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
7 User Settings 1
7.1 General Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
7.2 Graphic Windows Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
7.3 Data Manager Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
7.4 Output Window Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
7.5 Functions Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
7.6 Directories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
7.7 Editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
7.8 StationWare . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
iii
-
CONTENTS CONTENTS
III Handling 7
8 Basic Project Definition 1
8.1 Defining and Configuring a Project . . . . . . . . . . . . . . . . . . . . . . . . . . 1
8.1.1 The Project Edit Dialogue . . . . . . . . . . . . . . . . . . . . . . . . . . 3
8.1.2 The Project Overview Window . . . . . . . . . . . . . . . . . . . . . . . . 4
8.1.3 Project Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
8.1.4 Activating and Deactivating Projects . . . . . . . . . . . . . . . . . . . . 7
8.1.5 Exporting and Importing of Projects . . . . . . . . . . . . . . . . . . . . . 7
8.1.6 External References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
8.2 Creating New Grids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
9 Network Graphics (Single Line Diagrams) 1
9.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
9.2 Defining Network Models with the Graphical Editor . . . . . . . . . . . . . . . . . 1
9.2.1 Adding New Power System Elements . . . . . . . . . . . . . . . . . . . . 1
9.2.2 Drawing Nodes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
9.2.3 Drawing Branch Elements . . . . . . . . . . . . . . . . . . . . . . . . . . 4
9.2.4 Marking and Editing Power System Elements . . . . . . . . . . . . . . . 5
9.2.5 Interconnecting Power Subsystems . . . . . . . . . . . . . . . . . . . . . 6
9.2.6 Working with Substations in the Graphical Editor . . . . . . . . . . . . . 8
9.2.7 Working with Composite Branches in the Graphical Editor . . . . . . . . 11
9.2.8 Working with Single and Two Phase Elements . . . . . . . . . . . . . . . 12
9.3 Defining and Working with Lines and Cables . . . . . . . . . . . . . . . . . . . . 12
9.3.1 Defining a Line (ElmLne) . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
9.3.2 Defining Line Sections . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
9.3.3 Example Cable System . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
9.3.4 Example Line Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
9.4 Graphic Windows and Database Objects . . . . . . . . . . . . . . . . . . . . . . 20
9.4.1 Network Diagrams and Graphical Pages . . . . . . . . . . . . . . . . . . 20
9.4.2 Active Graphics, Graphics Board and Study Cases . . . . . . . . . . . . 21
9.4.3 Single Line Graphics and Data Objects . . . . . . . . . . . . . . . . . . . 22
iv
-
CONTENTS CONTENTS
9.4.4 Editing and Selecting Objects . . . . . . . . . . . . . . . . . . . . . . . . 23
9.4.5 Creating a New Project . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
9.4.6 Creating New Graphic Windows . . . . . . . . . . . . . . . . . . . . . . . 24
9.4.7 Basic Functionality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
9.4.8 Page Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
9.4.9 Drawing Toolboxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
9.4.10 Active Grid Folder (Target Folder) . . . . . . . . . . . . . . . . . . . . . . 26
9.5 Drawing Diagrams with Existing Network Elements . . . . . . . . . . . . . . . . 27
9.5.1 Drawing Existing Terminals . . . . . . . . . . . . . . . . . . . . . . . . . 27
9.5.2 Drawing Existing Lines, Switches, and Transformers . . . . . . . . . . . 28
9.5.3 Building Single Line Diagrams from Imported Data . . . . . . . . . . . . 28
9.6 Graphic Commands, Options, and Settings . . . . . . . . . . . . . . . . . . . . . 31
9.6.1 Zoom, Pan, and Select Commands . . . . . . . . . . . . . . . . . . . . . 32
9.6.2 Page, Graphic, and Print Options . . . . . . . . . . . . . . . . . . . . . . 33
9.6.3 Graphic Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
9.6.4 Layers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
9.6.5 Element Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
9.6.6 Graphic Attributes and Options . . . . . . . . . . . . . . . . . . . . . . . 48
9.6.7 Node Default Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
9.7 Editing and Changing Symbols of Elements . . . . . . . . . . . . . . . . . . . . . 54
9.8 Results Boxes, Text Boxes and Labels . . . . . . . . . . . . . . . . . . . . . . . . 54
9.8.1 Results Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
9.8.2 Text Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
9.8.3 Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
9.8.4 Free Text Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
9.9 Geographical Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
10 Data Manager 1
10.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
10.2 Using the Data Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
10.2.1 Navigating the Database Tree . . . . . . . . . . . . . . . . . . . . . . . . 3
v
-
CONTENTS CONTENTS
10.2.2 Adding New Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
10.2.3 Deleting an Item . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
10.2.4 Cut, Copy, Paste and Move Objects . . . . . . . . . . . . . . . . . . . . . 6
10.2.5 The Data Manager Message Bar . . . . . . . . . . . . . . . . . . . . . . 7
10.2.6 Additional Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
10.3 Defining Network Models with the Data Manager . . . . . . . . . . . . . . . . . . 8
10.3.1 Defining New Network Components in the Data Manager . . . . . . . . 8
10.3.2 Connecting Network Components in the Data Manager . . . . . . . . . . 9
10.3.3 Defining Substations in the Data Manager . . . . . . . . . . . . . . . . . 9
10.3.4 Defining Composite Branches in the Data Manager . . . . . . . . . . . . 10
10.3.5 Defining Sites in the Data Manager . . . . . . . . . . . . . . . . . . . . . 10
10.3.6 Editing Network Components using the Data Manager . . . . . . . . . . 11
10.4 Searching for Objects in the Data Manager . . . . . . . . . . . . . . . . . . . . . 12
10.4.1 Sorting Objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
10.4.2 Searching by Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
10.4.3 Using Filters for Search . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
10.5 Editing Data Objects in the Data Manager . . . . . . . . . . . . . . . . . . . . . . 16
10.5.1 Editing in Object Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
10.5.2 Editing in Detail Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
10.5.3 Copy and Paste while Editing . . . . . . . . . . . . . . . . . . . . . . . . 21
10.6 The Flexible Data Page Tab in the Data Manager . . . . . . . . . . . . . . . . . 22
10.6.1 Customizing the Flexible Data Page . . . . . . . . . . . . . . . . . . . . 22
10.7 The Input Window in the Data Manager . . . . . . . . . . . . . . . . . . . . . . . 24
10.7.1 Input Window Commands . . . . . . . . . . . . . . . . . . . . . . . . . . 24
10.8 Save and Restore Parts of the Database . . . . . . . . . . . . . . . . . . . . . . 25
10.8.1 Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
10.9 Spreadsheet Format Data Import/Export . . . . . . . . . . . . . . . . . . . . . . 26
10.9.1 Export to Spreadsheet Programs (e. g. MS EXCEL) . . . . . . . . . . . 27
10.9.2 Import from Spreadsheet Programs (e. g. MS EXCEL) . . . . . . . . . . 28
11 Study Cases 1
vi
-
CONTENTS CONTENTS
11.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
11.2 Creating and Using Study Cases . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
11.3 Summary Grid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
11.4 Study Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
11.5 The Study Case Edit Dialogue . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
11.6 Variation Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
11.7 Operation Scenarios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
11.8 Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
11.9 Events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
11.9.1 Dispatch Event . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
11.9.2 External Measurement Event . . . . . . . . . . . . . . . . . . . . . . . . 8
11.9.3 Intercircuit Fault Events . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
11.9.4 Events of Loads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
11.9.5 Message Event . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
11.9.6 Outage of Element . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
11.9.7 Parameter Events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
11.9.8 Save Results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
11.9.9 Short-Circuit Events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
11.9.10 Stop Events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
11.9.11 Switch Events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
11.9.12 Synchronous Machine Event . . . . . . . . . . . . . . . . . . . . . . . . 10
11.9.13 Tap Event . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
11.10Simulation Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
11.11Results Objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
11.12Variable Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
11.13Triggers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
11.14Graphic Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
12 Project Library 1
12.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
12.2 Equipment Type Library . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
vii
-
CONTENTS CONTENTS
12.3 Operational Library . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
12.3.1 Circuit Breaker Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
12.3.2 Demand Transfers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
12.3.3 Fault Cases and Fault Groups . . . . . . . . . . . . . . . . . . . . . . . . 6
12.3.4 Capability Curves (Mvar Limit Curves) for Generators . . . . . . . . . . . 9
12.3.5 Planned Outages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
12.3.6 Running Arrangements . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
12.3.7 Thermal Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
12.4 Templates Library . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
12.4.1 General Templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
12.4.2 Substation Templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
12.4.3 Busbar Templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
12.4.4 Composite Branch Templates . . . . . . . . . . . . . . . . . . . . . . . . 19
12.4.5 Example Generator Template . . . . . . . . . . . . . . . . . . . . . . . . 19
12.4.6 Example Busbar Template . . . . . . . . . . . . . . . . . . . . . . . . . . 20
13 Grouping Objects 1
13.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
13.2 Areas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
13.3 Virtual Power Plants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
13.3.1 Defining and Editing a New Virtual Power Plant . . . . . . . . . . . . . . 2
13.3.2 Applying a Virtual Power Plant . . . . . . . . . . . . . . . . . . . . . . . 3
13.3.3 Inserting a Generator into a Virtual Power Plant and Defining its VirtualPower Plant Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
13.4 Boundaries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
13.5 Circuits (ElmCircuit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
13.6 Feeders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
13.7 Operators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
13.8 Owners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
13.9 Paths . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
13.10Routes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
13.11Zones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
viii
-
CONTENTS CONTENTS
14 Operation Scenarios 1
14.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
14.2 Operation Scenarios Background . . . . . . . . . . . . . . . . . . . . . . . . . . 1
14.3 How to use Operation Scenarios . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
14.3.1 How to create an Operation Scenario . . . . . . . . . . . . . . . . . . . . 3
14.3.2 How to save an Operation Scenario . . . . . . . . . . . . . . . . . . . . . 4
14.3.3 How to activate an existing Operation Scenario . . . . . . . . . . . . . . 5
14.3.4 How to deactivate an Operation Scenario . . . . . . . . . . . . . . . . . 6
14.3.5 How to identify operational data parameters . . . . . . . . . . . . . . . . 6
14.4 Administering Operation Scenarios . . . . . . . . . . . . . . . . . . . . . . . . . 7
14.4.1 How to view objects missing from the Operation Scenario data . . . . . 7
14.4.2 How to compare the data in two operation scenarios . . . . . . . . . . . 8
14.4.3 How to view the non-default Running Arrangements . . . . . . . . . . . 8
14.4.4 How to transfer data from one Operation Scenario to another . . . . . . 9
14.4.5 How to update the default data with operation scenario data . . . . . . . 9
14.4.6 How exclude a grid from the Operation Scenario data . . . . . . . . . . 10
14.4.7 How to create a time based Operation Scenario . . . . . . . . . . . . . . 10
14.5 Advanced Configuration of Operation Scenarios . . . . . . . . . . . . . . . . . . 12
14.5.1 How to change the automatic save settings for Operation Scenarios . . 12
14.5.2 How to modify the data stored in Operation Scenarios . . . . . . . . . . 12
15 Network Variations and Expansion Stages 1
15.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
15.2 Variations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
15.3 Expansion Stages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
15.4 The Study Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
15.5 The Recording Expansion Stage . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
15.6 The Variation Scheduler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
15.7 Variation and Expansion Stage Example . . . . . . . . . . . . . . . . . . . . . . 5
15.8 Variation and Expansion Stage Housekeeping . . . . . . . . . . . . . . . . . . . 7
15.8.1 Applying Changes from Expansion Stages . . . . . . . . . . . . . . . . . 7
ix
-
CONTENTS CONTENTS
15.8.2 Consolidating Variations . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
15.8.3 Splitting Expansion Stages . . . . . . . . . . . . . . . . . . . . . . . . . 7
15.8.4 Comparing Variations and Expansion Stages . . . . . . . . . . . . . . . 8
15.8.5 Colouring Variations the Single Line Graphic . . . . . . . . . . . . . . . . 9
15.8.6 Variation Conflicts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
15.9 Compatibility with Previous PowerFactory Releases . . . . . . . . . . . . . . . . 10
15.9.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
15.9.2 Converting System Stages . . . . . . . . . . . . . . . . . . . . . . . . . . 10
16 Parameter Characteristics, Load States, and Tariffs 1
16.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
16.2 Parameter Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
16.2.1 Scalar Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
16.2.2 Discrete Time Characteristics . . . . . . . . . . . . . . . . . . . . . . . . 5
16.2.3 Vector Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
16.2.4 Matrix Parameter Characteristics . . . . . . . . . . . . . . . . . . . . . . 7
16.2.5 Parameter Characteristics from Files . . . . . . . . . . . . . . . . . . . . 7
16.2.6 Characteristic References . . . . . . . . . . . . . . . . . . . . . . . . . . 8
16.2.7 Example Application of Characteristics . . . . . . . . . . . . . . . . . . . 9
16.3 Load States . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
16.3.1 Creating Load States . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
16.3.2 Viewing Existing Load States . . . . . . . . . . . . . . . . . . . . . . . . 14
16.3.3 Load State Object Properties . . . . . . . . . . . . . . . . . . . . . . . . 14
16.3.4 Example Load States . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
16.4 Load Distribution States . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
16.4.1 Creating Load Distribution States . . . . . . . . . . . . . . . . . . . . . . 17
16.4.2 Viewing Existing Load Distribution States . . . . . . . . . . . . . . . . . 18
16.4.3 Load Distribution State Object Properties . . . . . . . . . . . . . . . . . 18
16.4.4 Example Load Distribution States . . . . . . . . . . . . . . . . . . . . . . 18
16.5 Tariffs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
16.5.1 Defining Time Tariffs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
x
-
CONTENTS CONTENTS
16.5.2 Defining Energy Tariffs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
17 Reporting and Visualizing Results 1
17.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
17.2 Results, Graphs and Documentation . . . . . . . . . . . . . . . . . . . . . . . . . 1
17.2.1 Editing Result Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
17.2.2 Output of Device Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
17.2.3 Output of Results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
17.2.4 Result Objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
17.3 Comparisons Between Calculations . . . . . . . . . . . . . . . . . . . . . . . . . 12
17.3.1 Editing a Set Of Comparison Cases . . . . . . . . . . . . . . . . . . . . 13
17.3.2 Update Database . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
17.4 Variable Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
17.4.1 The Variable Set Monitor Dialogue . . . . . . . . . . . . . . . . . . . . . 14
17.4.2 Searching the Variables to Monitor . . . . . . . . . . . . . . . . . . . . . 16
17.4.3 Examples of Variable Selection . . . . . . . . . . . . . . . . . . . . . . . 17
17.4.4 Selecting the Bus to be Monitored . . . . . . . . . . . . . . . . . . . . . 22
17.5 Virtual Instruments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
17.5.1 Virtual Instrument Panels . . . . . . . . . . . . . . . . . . . . . . . . . . 24
17.5.2 Plots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
17.5.3 The Vector Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
17.5.4 The Voltage Profile Plot . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
17.5.5 Schematic Visualization . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
17.5.6 The Waveform Plot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
17.5.7 The Curve-Input Command . . . . . . . . . . . . . . . . . . . . . . . . . 49
17.5.8 Embedded Graphic Windows . . . . . . . . . . . . . . . . . . . . . . . . 53
17.5.9 Tools for Virtual Instruments . . . . . . . . . . . . . . . . . . . . . . . . . 54
17.5.10 User-Defined Styles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
18 Data Management 1
18.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
18.2 Project Versions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
xi
-
CONTENTS CONTENTS
18.2.1 What is a Version? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
18.2.2 How to Create a Version . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
18.2.3 How to Rollback a Project . . . . . . . . . . . . . . . . . . . . . . . . . . 4
18.2.4 How to Check if a Version is the base for a derived Project . . . . . . . . 5
18.2.5 How to Delete a Version . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
18.3 Derived Projects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
18.3.1 Derived Projects Background . . . . . . . . . . . . . . . . . . . . . . . . 5
18.3.2 How to Create a Derived Project . . . . . . . . . . . . . . . . . . . . . . 8
18.4 Comparing and Merging Projects . . . . . . . . . . . . . . . . . . . . . . . . . . 8
18.4.1 Compare and Merge Tool Background . . . . . . . . . . . . . . . . . . . 9
18.4.2 How to Merge or Compare two projects using the Compare and MergeTool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
18.4.3 How to Merge or Compare three projects using the Compare and MergeTool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
18.4.4 Compare and Merge Tool Advanced Options . . . . . . . . . . . . . . . 12
18.4.5 Compare and Merge Tool diff browser . . . . . . . . . . . . . . . . . . . 14
18.5 How to update a Project . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
18.5.1 Updating a Derived Project from a new Version . . . . . . . . . . . . . . 20
18.5.2 Updating a base project from a Derived Project . . . . . . . . . . . . . . 21
18.5.3 Tips for working with the Compare and Merge Tool . . . . . . . . . . . . 21
18.6 Sharing Projects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
19 The DIgSILENT Programming Language - DPL 1
19.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
19.2 The Principle Structure of a DPL Command . . . . . . . . . . . . . . . . . . . . 2
19.3 The DPL Command Object . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
19.3.1 Creating a new DPL Command . . . . . . . . . . . . . . . . . . . . . . . 4
19.3.2 Defining a DPL Commands Set . . . . . . . . . . . . . . . . . . . . . . . 4
19.3.3 Executing a DPL Command . . . . . . . . . . . . . . . . . . . . . . . . . 4
19.3.4 DPL Advanced Options . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
19.3.5 DPL Script Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
19.4 The DPL Script Editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
xii
-
CONTENTS CONTENTS
19.5 The DPL Script Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
19.5.1 Variable Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
19.5.2 Constant parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
19.5.3 Assignments and Expressions . . . . . . . . . . . . . . . . . . . . . . . . 7
19.5.4 Standard Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
19.5.5 Program Flow Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . 9
19.5.6 Input and Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
19.6 Access to Other Objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
19.6.1 Object Variables and Methods . . . . . . . . . . . . . . . . . . . . . . . . 12
19.7 Access to Locally Stored Objects . . . . . . . . . . . . . . . . . . . . . . . . . . 12
19.8 Accessing the General Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
19.9 Accessing External Objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
19.10Remote Scripts and DPL Command Libraries . . . . . . . . . . . . . . . . . . . 16
19.10.1 Subroutines and Calling Conventions . . . . . . . . . . . . . . . . . . . . 17
19.11DPL Functions and Subroutines . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
20 PowerFactory Interfaces 1
20.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
20.2 DGS Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
20.2.1 DGS Interface Typical Applications . . . . . . . . . . . . . . . . . . . . . 2
20.2.2 DGS Structure (Database Schemas and File Formats) . . . . . . . . . . 3
20.2.3 DGS Import . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
20.2.4 DGS Export . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
20.3 PSS/E File Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
20.3.1 Importing PSS/E Steady-State Data . . . . . . . . . . . . . . . . . . . . 6
20.3.2 Import of PSS/E file (Dynamic Data) . . . . . . . . . . . . . . . . . . . . 11
20.3.3 Exporting a project to a PSS/E file . . . . . . . . . . . . . . . . . . . . . 12
20.4 NEPLAN Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
20.4.1 Importing NEPLAN Data . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
20.5 UCTE-DEF Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
20.5.1 Importing UCTE-DEF Data . . . . . . . . . . . . . . . . . . . . . . . . . 17
xiii
-
CONTENTS CONTENTS
20.5.2 Exporting UCTE-DEF Data . . . . . . . . . . . . . . . . . . . . . . . . . 19
20.6 CIM Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
20.6.1 Importing CIM Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
20.6.2 Exporting CIM Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
20.7 MATLAB Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
20.8 OPC Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
20.8.1 OPC Interface Typical Applications . . . . . . . . . . . . . . . . . . . . . 25
20.9 StationWare Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
20.9.1 About StationWare . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
20.9.2 Component Architecture . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
20.9.3 Fundamental Concepts . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
20.9.4 Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
20.9.5 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
20.9.6 Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
20.9.7 Technical Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
20.10API (Application Programming Interface) . . . . . . . . . . . . . . . . . . . . . . 54
IV Power System Analysis Functions 55
21 Load Flow Analysis 1
21.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
21.2 Technical Background . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
21.2.1 Network Representation and Calculation Methods . . . . . . . . . . . . 6
21.2.2 Active and Reactive Power Control . . . . . . . . . . . . . . . . . . . . . 9
21.2.3 Advanced Load Options . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
21.2.4 Temperature Dependency of Lines and Cables . . . . . . . . . . . . . . 19
21.3 Executing Load Flow Calculations . . . . . . . . . . . . . . . . . . . . . . . . . . 21
21.3.1 Basic Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
21.3.2 Active Power Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
21.3.3 Advanced Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
21.3.4 Iteration Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
xiv
-
CONTENTS CONTENTS
21.3.5 Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
21.3.6 Low Voltage Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
21.3.7 Advanced Simulation Options . . . . . . . . . . . . . . . . . . . . . . . . 31
21.4 Result Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
21.4.1 Viewing Results in the Single Line Diagram . . . . . . . . . . . . . . . . 33
21.4.2 Flexible Data Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
21.4.3 Predefined Report Formats (ASCII Reports) . . . . . . . . . . . . . . . . 34
21.4.4 Diagram Colouring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
21.4.5 Load Flow Sign Convention . . . . . . . . . . . . . . . . . . . . . . . . . 35
21.5 Troubleshooting Load Flow Calculation Problems . . . . . . . . . . . . . . . . . 35
21.5.1 General Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
21.5.2 Data Model Problem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
21.5.3 Some Load Flow Calculation Messages . . . . . . . . . . . . . . . . . . 38
21.5.4 Too many Inner Loop Iterations . . . . . . . . . . . . . . . . . . . . . . . 38
21.5.5 Too Many Outer Loop Iterations . . . . . . . . . . . . . . . . . . . . . . . 40
21.6 Load Flow Sensitivities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
21.6.1 Load Flow Sensitivities Options . . . . . . . . . . . . . . . . . . . . . . . 43
21.6.2 Load Flow Sensitivities Execution and Results . . . . . . . . . . . . . . . 44
21.6.3 Technical Background . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
22 Short-Circuit Analysis 1
22.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
22.1.1 The IEC 60909/VDE 0102 Method . . . . . . . . . . . . . . . . . . . . . 4
22.1.2 The ANSI Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
22.1.3 The Complete Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
22.1.4 The IEC 61363 Method . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
22.2 Executing Short-Circuit Calculations . . . . . . . . . . . . . . . . . . . . . . . . . 15
22.2.1 Toolbar/Main Menu Execution . . . . . . . . . . . . . . . . . . . . . . . . 15
22.2.2 Context-Sensitive Menu Execution . . . . . . . . . . . . . . . . . . . . . 15
22.2.3 Faults on Busbars/Terminals . . . . . . . . . . . . . . . . . . . . . . . . . 16
22.2.4 Faults on Lines and Branches . . . . . . . . . . . . . . . . . . . . . . . . 17
xv
-
CONTENTS CONTENTS
22.2.5 Multiple Faults Calculation . . . . . . . . . . . . . . . . . . . . . . . . . . 18
22.3 Short-Circuit Calculation Options . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
22.3.1 Basic Options (All Methods) . . . . . . . . . . . . . . . . . . . . . . . . . 19
22.3.2 Verification (Except for IEC 61363) . . . . . . . . . . . . . . . . . . . . . 23
22.3.3 Basic Options (IEC 60909/VDE 0102 Method) . . . . . . . . . . . . . . . 23
22.3.4 Advanced Options (IEC 60909/VDE 0102 Method) . . . . . . . . . . . . 24
22.3.5 Basic Options (ANSI C37 Method) . . . . . . . . . . . . . . . . . . . . . 27
22.3.6 Advanced Options (ANSI C37 Method) . . . . . . . . . . . . . . . . . . . 29
22.3.7 Basic Options (Complete Method) . . . . . . . . . . . . . . . . . . . . . 31
22.3.8 Advanced Options (Complete Method) . . . . . . . . . . . . . . . . . . . 33
22.3.9 Basic Options (IEC 61363) . . . . . . . . . . . . . . . . . . . . . . . . . . 35
22.3.10 Advanced Options (IEC 61363) . . . . . . . . . . . . . . . . . . . . . . . 36
22.4 Result Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
22.4.1 Viewing Results in the Single Line Diagram . . . . . . . . . . . . . . . . 37
22.4.2 Flexible Data Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
22.4.3 Predefined Report Formats (ASCII Reports) . . . . . . . . . . . . . . . . 38
22.4.4 Diagram Colouring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
23 Harmonics Analysis 1
23.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
23.2 Harmonic Load Flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
23.2.1 Basic Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
23.2.2 IEC 61000-3-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
23.2.3 Advanced Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
23.3 Frequency Sweep . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
23.3.1 Basic Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
23.3.2 Advanced Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
23.4 Filter Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
23.5 Modeling Harmonic Sources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
23.5.1 Definition of Harmonic Injections . . . . . . . . . . . . . . . . . . . . . . 9
23.5.2 Assignment of Harmonic Injections . . . . . . . . . . . . . . . . . . . . . 16
xvi
-
CONTENTS CONTENTS
23.5.3 Harmonic Distortion Results . . . . . . . . . . . . . . . . . . . . . . . . . 17
23.5.4 Frequency Dependent Parameters . . . . . . . . . . . . . . . . . . . . . 18
23.5.5 Waveform Plot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
23.6 Flicker Analysis (IEC 61400-21) . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
23.6.1 Continuous Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
23.6.2 Switching Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
23.6.3 Flicker Contribution of Wind Turbine Generator Models . . . . . . . . . . 23
23.6.4 Definition of Flicker Coefficients . . . . . . . . . . . . . . . . . . . . . . . 23
23.6.5 Assignment of Flicker Coefficients . . . . . . . . . . . . . . . . . . . . . 24
23.6.6 Flicker Result Variables . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
23.7 Definition of Result Variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
23.7.1 Definition of Variable Sets . . . . . . . . . . . . . . . . . . . . . . . . . . 26
23.7.2 Selection of Result Variables within a Variable Set . . . . . . . . . . . . 27
24 Flickermeter 1
24.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
24.2 Flickermeter (IEC 61000-4-15) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
24.2.1 Calculation of Short-Term Flicker . . . . . . . . . . . . . . . . . . . . . . 1
24.2.2 Calculation of Long-Term Flicker . . . . . . . . . . . . . . . . . . . . . . 2
24.3 Flickermeter Calculation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
24.3.1 Flickermeter Command . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
24.3.2 Data Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
24.3.3 Signal Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
24.3.4 Advanced Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
24.3.5 Input File Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
25 Stability and EMT Simulations 1
25.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
25.2 Calculation Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
25.2.1 Balanced RMS Simulation . . . . . . . . . . . . . . . . . . . . . . . . . 3
25.2.2 Three-Phase RMS Simulation . . . . . . . . . . . . . . . . . . . . . . . 4
25.2.3 Three-Phase EMT Simulation . . . . . . . . . . . . . . . . . . . . . . . . 4
xvii
-
CONTENTS CONTENTS
25.3 Setting Up a Simulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
25.3.1 Basic Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
25.3.2 Step Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
25.3.3 Step Size Adaptation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
25.3.4 Advanced Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
25.3.5 Noise Generation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
25.3.6 Advanced Simulation Options - Load Flow . . . . . . . . . . . . . . . . . 12
25.4 Result Objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
25.4.1 Saving Results from Previous Simulations . . . . . . . . . . . . . . . . . 14
25.5 Simulation Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
25.5.1 Frequency Scan Module . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
25.5.2 Loss of Synchronism Scan Module . . . . . . . . . . . . . . . . . . . . . 15
25.5.3 Parameter Scan Module . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
25.5.4 Voltage Scan Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
25.5.5 Simulation scan example . . . . . . . . . . . . . . . . . . . . . . . . . . 16
25.6 Events (IntEvt) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
25.7 Running a Simulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
25.8 Models for Stability Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
25.9 System Modelling Approach . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
25.9.1 The Composite Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
25.9.2 The Composite Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
25.9.3 The Common Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
25.10The Composite Block Definition . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
25.10.1 Drawing Composite Block Diagrams and Composite . . . . . . . . . . . 40
25.11User Defined (DSL) Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
25.11.1 Modeling and Simulation Tools . . . . . . . . . . . . . . . . . . . . . . . 48
25.11.2 DSL Implementation: an Introduction . . . . . . . . . . . . . . . . . . . . 49
25.11.3 Defining DSL Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
25.12The DIgSILENTDIgSILENT Simulation Language (DSL) . . . . . . . . . . . . . . 57
25.12.1 Terms and Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
25.12.2 General DSL Syntax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
xviii
-
CONTENTS CONTENTS
25.12.3 DSL Variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
25.12.4 DSL Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
25.12.5 Definition Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
25.12.6 Initial Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
25.12.7 Equation Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
25.12.8 Equation Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
25.12.9 DSL Macros . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
25.12.10Events and Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
25.12.11Example of a Complete DSL Model . . . . . . . . . . . . . . . . . . . . 67
25.13DSL Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
25.14DSL Standard Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
25.15DSL Special Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
25.16MATLAB Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
25.16.1 Example Implementation of Voltage Controller . . . . . . . . . . . . . . 73
25.16.2 Additional notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
26 Modal Analysis / Eigenvalue Calculation 1
26.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
26.2 Theory of Modal Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
26.3 How to Complete a Modal Analysis . . . . . . . . . . . . . . . . . . . . . . . . . 4
26.3.1 Completing a Modal Analysis with the Default Options . . . . . . . . . . 4
26.3.2 Explanation of Modal Analysis Command Basic Options (ComMod) . . . 5
26.3.3 Advanced Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
26.4 Viewing Modal Analysis Results . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
26.4.1 Viewing Modal Analysis Reports in the Output Window . . . . . . . . . . 9
26.4.2 Viewing Modal Analysis Results using the built-in Plots . . . . . . . . . . 12
26.4.3 Viewing Modal Analysis Results using the Modal Data Browser . . . . . 18
26.4.4 Viewing Results in the Data Manager Window . . . . . . . . . . . . . . . 20
26.5 Troubleshooting Modal Analysis Calculation Problems . . . . . . . . . . . . . . . 22
26.5.1 Models not supported by the QR method . . . . . . . . . . . . . . . . . . 23
26.5.2 The Arnoldi/Lanczos Method is slow . . . . . . . . . . . . . . . . . . . . 23
xix
-
CONTENTS CONTENTS
27 Model Parameter Identification 1
27.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
27.2 Target Functions and Composite Frames . . . . . . . . . . . . . . . . . . . . . . 2
27.2.1 The Measurement File Slot . . . . . . . . . . . . . . . . . . . . . . . . . 3
27.2.2 Power System Element Slot . . . . . . . . . . . . . . . . . . . . . . . . . 3
27.2.3 Comparison Slot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
27.3 Creating The Composite Identification Model . . . . . . . . . . . . . . . . . . . . 4
27.3.1 The Comparison Object . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
27.4 Performing a Parameter Identification . . . . . . . . . . . . . . . . . . . . . . . . 6
27.5 Identifying Primary Appliances . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
28 Contingency Analysis 1
28.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
28.2 Technical Background . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
28.2.1 Single Time Phase Contingency Analysis . . . . . . . . . . . . . . . . . 4
28.2.2 Multiple Time Phases Contingency Analysis . . . . . . . . . . . . . . . . 4
28.2.3 Time Sweep Option (Single Time Phase) . . . . . . . . . . . . . . . . . 5
28.2.4 Consideration of Predefined Switching Rules . . . . . . . . . . . . . . . 5
28.2.5 Parallel Computing Option (Single Time Phase) . . . . . . . . . . . . . . 5
28.3 Executing Contingency Analyses . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
28.4 The Single Time Phase Contingency Analysis Command . . . . . . . . . . . . . 7
28.4.1 Basic Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
28.4.2 Effectiveness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
28.4.3 Time Sweep . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
28.4.4 Advanced Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
28.4.5 Parallel Computing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
28.4.6 Calculating an Individual Contingency . . . . . . . . . . . . . . . . . . . 18
28.4.7 Representing Contingency Situations - Contingency Cases . . . . . . . 19
28.5 The Multiple Time Phases Contingency Analysis Command . . . . . . . . . . . 21
28.5.1 Basic Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
28.5.2 Effectiveness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
xx
-
CONTENTS CONTENTS
28.5.3 Multiple Time Phases . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
28.5.4 Time Sweep . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
28.5.5 Advanced Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
28.5.6 Parallel Computing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
28.5.7 Defining Time Phases for Contingency Analyses . . . . . . . . . . . . . 24
28.5.8 Representing Contingency Situations with Post-Fault Actions . . . . . . 26
28.6 Creating Contingency Cases Using Fault Cases and Groups . . . . . . . . . . . 28
28.6.1 Browsing Fault Cases and Fault Groups . . . . . . . . . . . . . . . . . . 29
28.6.2 Defining a Fault Case . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
28.6.3 Defining a Fault Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
28.7 Creating Contingency Cases Using the Contingency Definition Command . . . . 31
28.8 Comparing Contingency Results . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
28.9 Result Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
28.9.1 Predefined Report Formats (Tabular and ASCII Reports) . . . . . . . . . 35
29 Reliability Assessment 1
29.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
29.2 Probabilistic Reliability Assessment - Technical Background . . . . . . . . . . . 3
29.2.1 Reliability Assessment Procedure . . . . . . . . . . . . . . . . . . . . . . 4
29.2.2 Stochastic Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
29.2.3 Calculated Results for Reliability Assessment . . . . . . . . . . . . . . . 7
29.2.4 System State Enumeration in Reliability Assessment . . . . . . . . . . . 11
29.2.5 Failure Effect Analysis in Reliability Assessment . . . . . . . . . . . . . . 12
29.3 Setting up the Network Model for Reliability Assessment . . . . . . . . . . . . . 17
29.3.1 How to Define Stochastic Failure and Repair models . . . . . . . . . . . 18
29.3.2 How to Create Feeders for Reliability Calculation . . . . . . . . . . . . . 23
29.3.3 Configuring Switches for the Reliability Calculation . . . . . . . . . . . . 23
29.3.4 Load Modeling for Reliability Assessment . . . . . . . . . . . . . . . . . 24
29.3.5 Modelling Load Interruption Costs . . . . . . . . . . . . . . . . . . . . . 26
29.3.6 System Demand and Load States (ComLoadstate) . . . . . . . . . . . . 26
29.3.7 Fault Clearance Based on Protection Device Location . . . . . . . . . . 26
xxi
-
CONTENTS CONTENTS
29.3.8 How to Consider Planned Maintenance . . . . . . . . . . . . . . . . . . 26
29.3.9 Specifying Individual Component Constraints . . . . . . . . . . . . . . . 27
29.4 Running The Reliability Assessment Calculation . . . . . . . . . . . . . . . . . . 27
29.4.1 How to run the Reliability Assessment . . . . . . . . . . . . . . . . . . . 27
29.4.2 Viewing the FEA results for a Specific Contingency . . . . . . . . . . . . 34
29.4.3 Viewing the Load Point Indices . . . . . . . . . . . . . . . . . . . . . . . 34
29.4.4 Viewing the System Reliability Indices (Spreadsheet format) . . . . . . . 35
29.4.5 Printing ASCII Reliability Reports . . . . . . . . . . . . . . . . . . . . . . 37
29.4.6 Using the Colouring modes to aid Reliability Analysis . . . . . . . . . . . 37
29.4.7 Using the Contribution to Reliability Indices Script . . . . . . . . . . . . . 38
30 Generation Adequacy Analysis 1
30.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
30.2 Technical Background . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
30.3 Database Objects and Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
30.3.1 Stochastic Model for Generation Object (StoGen) . . . . . . . . . . . . . 4
30.3.2 Power Curve Type (TypPowercurve) . . . . . . . . . . . . . . . . . . . . 5
30.3.3 Meteorological Station (ElmMeteostat) . . . . . . . . . . . . . . . . . . . 6
30.4 Assignment of Stochastic Model for Generation Object . . . . . . . . . . . . . . 7
30.4.1 Definition of a Stochastic Multi-State Model . . . . . . . . . . . . . . . . 7
30.4.2 Stochastic Wind Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
30.4.3 Time Series Characteristic for Wind Generation . . . . . . . . . . . . . . 9
30.4.4 Demand definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
30.4.5 Generation Adequacy Analysis Toolbar . . . . . . . . . . . . . . . . . . . 13
30.4.6 Generation Adequacy Initialisation Command (ComGenrelinc) . . . . . . 13
30.4.7 Run Generation Adequacy Command (ComGenrel) . . . . . . . . . . . . 17
30.5 Generation Adequacy Results . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
30.5.1 Draws (Iterations) Plots . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
30.5.2 Distribution (Cumulative Probability) Plots . . . . . . . . . . . . . . . . . 20
30.5.3 Convergence Plots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
30.5.4 Summary of variables calculated during the Generation Adequacy Analysis 24
xxii
-
CONTENTS CONTENTS
31 Optimal Power Flow 1
31.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
31.2 AC Optimization (Interior Point Method) . . . . . . . . . . . . . . . . . . . . . . . 1
31.2.1 Basic Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
31.2.2 Initialization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
31.2.3 Advanced Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
31.2.4 Iteration Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
31.2.5 Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
31.3 DC Optimization (Linear Programming) . . . . . . . . . . . . . . . . . . . . . . . 21
31.3.1 Basic Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
31.3.2 Initialization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
31.3.3 Advanced Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
31.3.4 Iteration Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
31.4 Contingency Constrained DC Optimization (LP Method) . . . . . . . . . . . . . . 32
31.4.1 Basic Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
31.4.2 Initialization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
31.4.3 Advanced Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
31.4.4 Iteration Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
31.4.5 Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
32 Techno-Economical Calculation 1
32.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
32.2 Background . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
32.3 Calculation Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
32.3.1 Basic Options Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
32.3.2 Costs Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
32.3.3 Output Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
32.4 Example Calculation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
33 Distribution Network Tools 1
33.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
33.2 Voltage Sag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
xxiii
-
CONTENTS CONTENTS
33.2.1 Calculation Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
33.2.2 How to Perform a Voltage Sag Table Assessment . . . . . . . . . . . . . 3
33.2.3 Voltage Sag Table Assessment Results . . . . . . . . . . . . . . . . . . 4
33.3 Voltage Profile Optimization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
33.3.1 Optimization Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
33.3.2 Basic Options Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
33.3.3 Output Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
33.3.4 Advanced Options Page . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
33.3.5 Results of Voltage Profile Optimization . . . . . . . . . . . . . . . . . . . 10
33.4 Tie Open Point Optimization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
33.4.1 Tie Open Point Optimization Background . . . . . . . . . . . . . . . . . . 12
33.4.2 How to run a Tie Open Point Optimization . . . . . . . . . . . . . . . . . 12
33.5 Backbone Calculation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
33.5.1 Basic Options Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
33.5.2 Scoring Settings Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
33.5.3 Tracing Backbones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
33.5.4 Example Backbone Calculation . . . . . . . . . . . . . . . . . . . . . . . 19
33.6 Optimal RCS Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
33.6.1 Basic Options Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
33.6.2 Output Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
33.6.3 Advanced Options Page . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
33.6.4 Example Optimal RCS Calculation . . . . . . . . . . . . . . . . . . . . . 22
34 Optimal Capacitor Placement 1
34.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
34.2 Optimal Capacitor Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
34.2.1 OCP Objective Function . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
34.2.2 OCP Optimization Procedure . . . . . . . . . . . . . . . . . . . . . . . . 4
34.2.3 Basic Options Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
34.2.4 Available Capacitors Page . . . . . . . . . . . . . . . . . . . . . . . . . . 7
34.2.5 Load Characteristics Page . . . . . . . . . . . . . . . . . . . . . . . . . . 9
xxiv
-
CONTENTS CONTENTS
34.2.6 Advanced Options Page . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
34.2.7 Results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
35 Cable Sizing 1
35.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
35.2 Calculation Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
35.2.1 Basic Options Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
35.2.2 Constraints Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
35.2.3 Output Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
35.2.4 Advanced Options Page . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
35.2.5 Type Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
36 Motor Starting 1
36.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
36.2 How to define a motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
36.2.1 How to define a motor Type and starting methodology . . . . . . . . . . 2
36.2.2 How to define a motor driven machine . . . . . . . . . . . . . . . . . . . 3
36.3 How to run a Motor Starting simulation . . . . . . . . . . . . . . . . . . . . . . . 4
36.3.1 Basic Options Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
36.3.2 Output Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
36.3.3 Motor Starting simulation results . . . . . . . . . . . . . . . . . . . . . . 6
36.3.4 Motor Starting Example . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
37 Arc-Flash Hazard Analysis 1
37.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
37.2 Arc-Flash Hazard Analysis Background . . . . . . . . . . . . . . . . . . . . . . . 1
37.2.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
37.2.2 Data Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
37.3 Arc-Flash Hazard Analysis Calculation Options . . . . . . . . . . . . . . . . . . . 3
37.3.1 Arc-Flash Hazard Analysis Basic Options Page . . . . . . . . . . . . . . 3
37.3.2 Arc-Flash Hazard Analysis Advanced Options Page . . . . . . . . . . . 4
37.4 Arc-Flash Hazard Analysis Results . . . . . . . . . . . . . . . . . . . . . . . . . 5
xxv
-
CONTENTS CONTENTS
37.4.1 Viewing Results in the Single Line Graphic . . . . . . . . . . . . . . . . . 5
37.4.2 Arc-Flash Reports Dialogue . . . . . . . . . . . . . . . . . . . . . . . . . 5
37.4.3 Arc-Flash Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
37.5 Example Arc-Flash Hazard Analysis Calculation . . . . . . . . . . . . . . . . . . 6
38 Protection 1
38.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
38.2 General approach to protection modelling in PowerFactory . . . . . . . . . . . . 1
38.2.1 The Modelling Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
38.3 Defining a protection scheme - a brief overview . . . . . . . . . . . . . . . . . . 5
38.3.1 Adding protective devices to the network model . . . . . . . . . . . . . . 5
38.3.2 Locating Devices which have been added to the network model . . . . . 8
38.4 Setup and analysis of an overcurrent protection scheme . . . . . . . . . . . . . 8
38.4.1 Overcurrent relay model setup - basic data tab . . . . . . . . . . . . . . 8
38.4.2 Overcurrent relay model setup - max/min fault currents tab . . . . . . . . 9
38.4.3 The Current Transformer . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
38.4.4 The Voltage Transformer . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
38.4.5 Fuse model setup - basic data tab . . . . . . . . . . . . . . . . . . . . . 17
38.4.6 Fuse model setup - optimization tab . . . . . . . . . . . . . . . . . . . . 18
38.4.7 Basic relay blocks for overcurrent relays . . . . . . . . . . . . . . . . . . 19
38.4.8 The time-overcurrent plot . . . . . . . . . . . . . . . . . . . . . . . . . . 26
38.5 Setup and analysis of a distance protection scheme . . . . . . . . . . . . . . . . 45
38.5.1 Distance relay model setup - basic data tab . . . . . . . . . . . . . . . . 45
38.5.2 Distance relay model setup - max./min. fault currents tab . . . . . . . . . 47
38.5.3 Instrument Transformers for distance protection . . . . . . . . . . . . . . 48
38.5.4 Basic relay blocks used for distance protection . . . . . . . . . . . . . . 48
38.5.5 The time-distance plot . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
38.5.6 The impedance plot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
38.6 Accessing results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
38.6.1 Reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
38.6.2 Results in Single Line Graphic . . . . . . . . . . . . . . . . . . . . . . . . 66
xxvi
-
CONTENTS CONTENTS
38.7 Building a basic overcurrent relay model . . . . . . . . . . . . . . . . . . . . . . 67
38.8 Chapter appendix - Other commonly used relay blocks . . . . . . . . . . . . . . 75
39 Network Reduction 1
39.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
39.2 Technical Background . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
39.2.1 Network Reduction for Load Flow . . . . . . . . . . . . . . . . . . . . . . 2
39.2.2 Network Reduction for Short-Circuit . . . . . . . . . . . . . . . . . . . . 2
39.3 How to Complete a Network Reduction . . . . . . . . . . . . . . . . . . . . . . . 2
39.3.1 How to Backup the Project (optional) . . . . . . . . . . . . . . . . . . . . 2
39.3.2 How to run the Network Reduction tool . . . . . . . . . . . . . . . . . . . 3
39.3.3 Expected Output of the Network Reduction . . . . . . . . . . . . . . . . 4
39.4 Network Reduction Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
39.4.1 Basic Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
39.4.2 Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
39.4.3 Advanced Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
39.4.4 Verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
39.5 Network Reduction Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
39.6 Tips for using the Network Reduction Tool . . . . . . . . . . . . . . . . . . . . . 13
39.6.1 Station Controller Busbar is Reduced . . . . . . . . . . . . . . . . . . . . 13
39.6.2 Network Reduction doesnt Reduce Isolated Areas . . . . . . . . . . . . 14
39.6.3 The Reference Machine is not Reduced . . . . . . . . . . . . . . . . . . 14
40 State Estimation 1
40.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
40.2 Objective Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
40.3 Components of the PowerFactory State Estimator . . . . . . . . . . . . . . . . . 2
40.3.1 Plausibility Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
40.3.2 Observability Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
40.3.3 State Estimation (Non-Linear Optimization) . . . . . . . . . . . . . . . . 5
40.4 State Estimator Data Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
40.4.1 Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
xxvii
-
CONTENTS CONTENTS
40.4.2 Activating the State Estimator Display Option . . . . . . . . . . . . . . . 11
40.4.3 Editing the Element Data . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
40.5 Running SE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
40.5.1 Basic Setup Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
40.5.2 Advanced Setup Options for the Plausibility Check . . . . . . . . . . . . 20
40.5.3 Advanced Setup Options for the Observability Check . . . . . . . . . . . 20
40.5.4 Advanced Setup Options for Bad Data Detection . . . . . . . . . . . . . 21
40.5.5 Advanced Setup Options for Iteration Control . . . . . . . . . . . . . . . 21
40.6 Results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
40.6.1 Output Window Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
40.6.2 External Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
40.6.3 Estimated States . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
40.6.4 Colour Representation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
V Appendix 31
A Glossary 1
B Hotkeys Reference 1
B.1 Calculation Hotkeys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
B.2 Graphic Windows Hotkeys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
B.3 Data Manager Hotkeys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
B.4 Dialogue Hotkeys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
B.5 Output Window Hotkeys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
B.6 Editor Hotkeys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
C Technical References of Models 7
C.1 Branch Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
C.1.1 2-Winding Transformers (ElmTr2/ElmTr2n) . . . . . . . . . . . . . . . . . 8
C.1.2 3-Winding Transformer (ElmTr3) . . . . . . . . . . . . . . . . . . . . . . . 9
C.1.3 Autoransformers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
C.1.4 Booster Transformer (ElmTrb) . . . . . . . . . . . . . . . . . . . . . . . . 9
xxviii
-
CONTENTS CONTENTS
C.1.5 Overhead Lines Systems . . . . . . . . . . . . . . . . . . . . . . . . . . 9
C.1.6 Cables Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
C.1.7 Series Capacitances (ElmScap) . . . . . . . . . . . . . . . . . . . . . . . 12
C.1.8 Series Reactance (ElmSind) . . . . . . . . . . . . . . . . . . . . . . . . . 12
C.1.9 Common Impedance (ElmZpu) . . . . . . . . . . . . . . . . . . . . . . . 13
C.2 Generators and Loads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
C.2.1 Asynchronous Machine (ElmAsm) . . . . . . . . . . . . . . . . . . . . . 13
C.2.2 Doubly Fed Induction Machine (ElmAsmsc) . . . . . . . . . . . . . . . . 13
C.2.3 Static Generator (ElmGenstat) . . . . . . . . . . . . . . . . . . . . . . . 13
C.2.4 Synchronous Machine (ElmSym) . . . . . . . . . . . . . . . . . . . . . . 14
C.2.5 Loads (ElmLod) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
C.2.6 Low Voltage Load (ElmLodlv) . . . . . . . . . . . . . . . . . . . . . . . . 14
C.2.7 Partial Loads (ElmLodlvp) . . . . . . . . . . . . . . . . . . . . . . . . . . 14
C.2.8 Motor Driven Machine (ElmMdm X) . . . . . . . . . . . . . . . . . . . . 15
C.3 Power Electronic Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
C.3.1 PWM AC/DC Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
C.3.2 Rectifier/Inverter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
C.3.3 Soft Starter (ElmVar) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
C.3.4 DC/DC Converter (ElmDcdc) . . . . . . . . . . . . . . . . . . . . . . . . 16
C.4 Reactive Power Compensation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
C.4.1 Neutral Earthing Element (ElmNec) . . . . . . . . . . . . . . . . . . . . . 16
C.4.2 Shunt/Filter Element (ElmShnt) . . . . . . . . . . . . . . . . . . . . . . . 16
C.4.3 Static Var System (ElmSvs) . . . . . . . . . . . . . . . . . . . . . . . . . 16
C.4.4 Station Controller (ElmStactrl)) . . . . . . . . . . . . . . . . . . . . . . . 16
C.5 Sources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
C.5.1 AC Voltage Source (ElmVac) . . . . . . . . . . . . . . . . . . . . . . . . 17
C.5.2 DC Voltage Source (ElmVdc) . . . . . . . . . . . . . . . . . . . . . . . . 17
C.5.3 DC Current Source (ElmDci) . . . . . . . . . . . . . . . . . . . . . . . . . 17
C.5.4 External Network (ElmXnet) . . . . . . . . . . . . . . . . . . . . . . . . . 17
C.5.5 Fourier Source (ElmFsrc) . . . . . . . . . . . . . . . . . . . . . . . . . . 17
C.6 Measurement Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
xxix
-
CONTENTS CONTENTS
C.6.1 Current Measurement (StaImea) . . . . . . . . . . . . . . . . . . . . . . 17
C.6.2 Power Measurement (StaPqmea) . . . . . . . . . . . . . . . . . . . . . . 18
C.6.3 Voltage Measurement (StaVmea) . . . . . . . . . . . . . . . . . . . . . . 18
C.6.4 Phase Measurement Device (Phase Locked Loop, ElmPhi pll) . . . . . 18
C.7 Digital Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
C.7.1 Digital Clock (ElmClock) . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
C.7.2 Digital Register (ElmReg) . . . . . . . . . . . . . . . . . . . . . . . . . . 18
C.7.3 Sample and Hold Model (ElmSamp) . . . . . . . . . . . . . . . . . . . . 18
C.7.4 Trigger Model (ElmTrigger) . . . . . . . . . . . . . . . . . . . . . . . . . . 19
C.8 Analysis Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
C.8.1 Fast Fourier Transform (ElmFft)) . . . . . . . . . . . . . . . . . . . . . . 19
C.8.2 File Object (ElmFile) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
D DPL Reference 1
D.1 Class Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
D.2 DPL Methods and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
D.3 General Functions and Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
D.3.1 Object . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
D.3.2 General Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
D.3.3 String . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
D.3.4 Time and Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
D.3.5 Output Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
D.3.6 File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
D.3.7 Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
D.4 Project Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
D.4.1 Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
D.4.2 Project Methods (IntPrj) . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
D.4.3 Project Folder Methods (IntPrjfolder) . . . . . . . . . . . . . . . . . . . . 105
D.4.4 StudyCaseMethods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
D.4.5 Variant Methods (IntVariant) . . . . . . . . . . . . . . . . . . . . . . . . . 109
D.4.6 Variation Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
xxx
-
CONTENTS CONTENTS
D.4.7 Scenario Methods (IntScenario) . . . . . . . . . . . . . . . . . . . . . . . 112
D.5 Reporting and Graphical Representation . . . . . . . . . . . . . . . . . . . . . . 113
D.5.1 Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
D.5.2 Virtual Instrument Methods: SetVipage . . . . . . . . . . . . . . . . . . . 115
D.5.3 Virtual Instrument Methods: VisPlot/VisPlot2 Methods . . . . . . . . . . 125
D.5.4 Virtual Instrument Methods:VisFft Methods . . . . . . . . . . . . . . . . 146
D.5.5 Virtual Instrument Methods: IntPlot Methods . . . . . . . . . . . . . . . . 146
D.5.6 Graphic Board Methods (SetDesktop) . . . . . . . . . . . . . . . . . . . 151
D.5.7 Text Box Methods (SetLevelvis) . . . . . . . . . . . . . . . . . . . . . . . 158
D.5.8 Table Report Methods (ComTablereport) . . . . . . . . . . . . . . . . . . 162
D.6 Data Container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178
D.6.1 SetFilt Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178
D.6.2 SetSelect Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
D.6.3 Feeder (SetFeeder) Methods . . . . . . . . . . . . . . . . . . . . . . . . 186
D.6.4 Path (SetPath) Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
D.6.5 IntDplmap Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190
D.6.6 IntDplvector Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
D.7 PowerFactory Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202
D.7.1 General Functions and Methods . . . . . . . . . . . . . . . . . . . . . . 202
D.7.2 Load Flow Calculation (ComLdf) Methods . . . . . . . . . . . . . . . . . 205
D.7.3 Short-Circuit Calculation (ComShc) . . . . . . . . . . . . . . . . . . . . . 206
D.7.4 Time-Domain Simulation . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
D.7.5 Result Export (ComRes) Methods . . . . . . . . . . . . . . . . . . . . . 208
D.7.6 Contingency Case (ComOutage) Methods . . . . . . . . . . . . . . . . . 209
D.7.7 Contingency Analysis (ComSimoutage) Methods . . . . . . . . . . . . . 211
D.7.8 Contingency Definition (ComNmink) Methods . . . . . . . . . . . . . . . 213
D.7.9 Reliability Assessment (ComRel3) Methods . . . . . . . . . . . . . . . . 215
D.7.10 DPL Command (ComDpl) Methods . . . . . . . . . . . . . . . . . . . . . 218
D.7.11 ComImport Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219
D.7.12 ComMerge Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221
D.7.13 ComLink Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227
xxxi
-
CONTENTS CONTENTS
D.7.14 ComUcteexp Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228
D.8 Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228
D.8.1 Grid (ElmNet) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229
D.8.2 Asynchronous Machine (ElmAsm) . . . . . . . . . . . . . . . . . . . . . 230
D.8.3 Double Fed Induction Machine (ElmAsmsc) . . . . . . . . . . . . . . . . 231
D.8.4 Feeder (ElmFeeder) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232
D.8.5 Boundary (ElmBoundary) . . . . . . . . . . . . . . . . . . . . . . . . . . 236
D.8.6 Cubicles (StaCubic) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236
D.8.7 Composite Model (ElmComp) . . . . . . . . . . . . . . . . . . . . . . . . 239
D.8.8 Breaker/Switch (ElmCoup) . . . . . . . . . . . . . . . . . . . . . . . . . . 239
D.8.9 Line (ElmLne) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242
D.8.10 Result Object (ElmRes) . . . . . . . . . . . . . . . . . . . . . . . . . . . 249
D.8.11 Station Control (ElmStactrl) . . . . . . . . . . . . . . . . . . . . . . . . . 262
D.8.12 Substation (ElmSubstat) . . . . . . . . . . . . . . . . . . . . . . . . . . . 264
D.8.13 Synchronous Machine (ElmSym) . . . . . . . . . . . . . . . . . . . . . . 270
D.8.14 Terminal (ElmTerm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273
D.8.15 Tower (ElmTow) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276
D.8.16 Transformer (ElmTr2 / ElmTr2n / ElmTr3) . . . . . . . . . . . . . . . . . . 278
D.8.17 Zone (ElmZone) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 279
D.8.18 Switch (StaSwitch) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282
D.8.19 Bay (ElmBay) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 284
D.9 Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 284
D.9.1 Induction Machine Type (TypAsm) . . . . . . . . . . . . . . . . . . . . . 284
D.9.2 Induction Machine Type (TypAsmo) . . . . . . . . . . . . . . . . . . . . . 285
D.9.3 Line Type (TypLne) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285
D.10 Additional Objects (Int*) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286
D.10.1 IntEvt Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286
D.10.2 IntForm Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286
D.10.3 IntMat Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 288
D.10.4 IntMon Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 294
D.10.5 IntThrating Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 296
xxxii
-
D.10.6 IntUser Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297
D.10.7 IntUserman Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 299
D.10.8 IntVec Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302
D.11 DDE Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 304
E The DIgSILENT Output Language 1
E.0.1 Format string, Variable names and text Lines . . . . . . . . . . . . . . . 2
E.1 Placeholders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
E.2 Variables, Units and Names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
E.3 Color . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
E.4 Advanced Syntax Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
E.5 Line Types and Page Breaks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
E.6 Predefined Text Macros . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
E.7 Object Iterations, Loops, Filters and Includes . . . . . . . . . . . . . . . . . . . . 8
F Element Symbol Definition 1
F.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
F.2 General Symbol Definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1