the mouth produced by the riverina schools project partnership 2011
Post on 21-Dec-2015
214 views
TRANSCRIPT
The Mouth
Produced by the Riverina Schools Project Partnership 2011
Mr Mouth
Equipment
You Will Need:
• 1 Paper Plate• 1 Stencil• 1 Straw• Scissors• Glue• Coloured Pencils
• Colour in the stencil
Step 1
Step 2
• Fold paper plate in half• Draw and colour lips onto paper
plate
Step 3• Cut out the pictures on the stencil
Step 4
• Glue the back of the mouth picture onto the top half of your hand puppet.
• Make sure the straight edge is sitting on the fold line as shown in the picture above.
Step 5• Cut slits in the tabs and fold the tabs behind the teeth
Step 6• Put glue along the tabs• Stick one line of teeth
along the top and the other along the bottom,as shown below.
Step 7• Fold over the tab on the
tongue
Step 8• Put your hand up and wait for
a helper to stick the tongue onto the puppet and poke a hole into the plate
Step 9• The helper will poke the straw
through the plate and attach the tongue to the straw
• Clean up any mess and left over equipment
• Keep your mouths in a safe place for next week.
You are finished!