CopperPro™ Series II

The complete test set for qualifying your local loop for ADSL, VDSL

and special services.

N E T W O R K S U P E R V I S I O N

Demand is growing rapidly for next

generation broadband services such

as video on demand, broadband

Internet access, and VoIP. That

presents tremendous potential for

profitable new business.

But, it also puts pressure on your

technicians and outside plant (OSP)

to deliver the performance those new

services require. To be ready to take

advantage of new opportunities, your

technicians need a test set that

can help them:

• Quicklyqualifythefacilitiesfor

ADSL, VDSL, HDSL, T1, and other

special services.

• Easilyidentifyandlocate

possible problems to ensure

reliable performance.

• Installnewservicesefficiently

with fewer call-backs.

• Verifyconnectivityandnetwork

performance to ensure that next

generation services perform up

to your customers’ expectations.

In short, your technicians need

the new Fluke Networks CopperPro™

Series II copper loop tester.

CopperPro Series II provides a full range of troubleshooting, fault locating, testing and qualification capabilities. That means top performance with fewer tools to carry. Plus, its rugged construction and easy-to-use features give your technicians the vision to build, repair, install, and maintain OSP systems more efficiently with fewer repeats.

Expedite installation and maintenanceCopperProSeriesIImakesfastworkofinstallingandmaintainingservice. The one-button POTS Auto-Test quickly documents status before and after work is complete. The CopperPro also gives you a clear view of all the basic tests you need to ensure top performance, including:

• ACandDCvoltage

• Loopcurrent

• Circuitnoise

• Balanceandleakage

• CallerID/ANI

Plus, you can quickly run loss and slope tests with its automated dial-up testing, and use the built-in dial set with phone number storage. You can also verify xDSL connectivity, performance and capacity up to VDSL rates with optional xDSL golden modems

A comprehensive set of copper loop testing functionsTheCopperProSeriesIIpacksallthetest,analysis,andtroubleshootingcapabilitiesanOSPtechnicianneeds into one integrated handheld tool that gives a clear vision of your local loop, including:

Streamline trouble callsStep-by-stepinstructionsmakeCopperProSeriesII a breeze to set up. Use the unique TDR Auto-Test to:

• Zeroinonfaultssuchasshortbridgetapsand shorted or open pairs.

• Countandlocateloadcoils.

• Locatehighresistancefaultsprecisely,nomatter the cable makeup.

• Easilyidentifythesourceofbroadband interference and impulse noise, up to VDSL bandwidth.

• DCVandACVmeasurement(snapshotandcontinuous)

• Shorts,grounds,andloopresistancewith

distance conversion

• Resistivefaultlocation(WheatstoneandK-Test)

• Loadcoilcounterwithestimateddistancetofaultand

impedance versus frequency graph to distinguish real

results from false positives

• MultimodeTDRwithAuto-Test:pair1test,comparepair

1 and 2, difference between pair 1 and 2, pair 1 monitor,

pair 2 to pair 1 crosstalk, compare pair 1 to stored trace

• Broadbandnoiseandlevelspectralanalysiswith

interference masks (VDSL bandwidth)

• Broadbandlossimpulsenoisereduction(VDSLbandwidth)

• ADSL,ADSL2+,VDSL2andXDSLAuto-Testforpair

qualification(variesbymodel)

• OptionalADSL1/2/2+Modem(ATU-R)

• OptionalVDSLModem(ATU-RandATU-C)

• Broadbandterminatedtestmacros

(Terminator,SmartStrap,MyHelper,FED)

• Leakagestresstestto200V

• Loopdevicecounter

• Tracingtonewithfourmodes

• Voicefrequencynoise–metallicandpowerinfluence

• Voicefrequencyloss

• Voicefrequencylongitudinalbalance

• Voicefrequencytonegenerator

• AutomatedPOTSAuto-Test

• Dialsetandnon-intrusivelinemonitor

• Voicefrequencyterminatedanddial-uptestmacros

(SmartStrap,MyHelper,FED,SASS,DATU,SmartPro)

Make CopperPro™ Series II standard equipment

Advanced features to support next generation servicesTheCopperProSeriesIIoffers several new features focused specificallyonhelpingyouinstalland maintain next generation services. These include:

• Bandwidthto18MHztosupportADSL2+andVDSLtechnologies

• Identificationofbroadbandnoise for VDSL, including crosstalk and impulse noise

• AdvancedTDRcapabilitiesforlocating short bridge taps and other hard-to-detect impair-ments to DSL performance

• GoldenmodemoptionsforADSL,ADSL2+,andVDSL

Seamlessly integrate field testing with backoffice systemsNotonlydoestheCopperProSeriesIIcollectandstorecomprehensivetestdata,italsointegrateswithNetDSLplantconditioningand EXPTechnicianProductivitysolutionstoautomatejobcloseoutand databaseupdates.ByintegratingwiththeNetDSLprocess,the CopperProSeriesIIeliminatesduplicatetasksandpaperworkand requires no additional servers, systems, or interfaces. AspartoftheFlukeNetworksEXPproductivitysolution,theCopperProSeriesIIdramaticallyimprovestechnicianefficiencywhilesignificantlyreducing repeats. Automated close-out tests assure consistent, complete testing and centralized test results make it easy to track results and monitor technical productivity.

Multiple tools in one deviceBuildingonthepopularityoftheoriginalCopperPro,theSeriesIIisacomplete solution for testing, troubleshooting, and qualifying OSP copper cablesandnetworkservices.TheCopperProSeriesIIiseasytouseandintegrates multiple test tools into a single device that provides all the functions your technicians need, including:

• Metallictesting,includingvoltage,resistance,balance,andnoise

• Faultlocatingusingthreeterminalopens,RFL,orTDR

• Advancedbroadbandtroubleshootingandqualificationfornext generationservices,includingADSL2+andVDSL

• Identifyingvoiceandbroadbandnoiseandinterference

• Collectingandreportingcomprehensiveresults

• Integrationwithbackofficesystemstoupdateloopdatabases and maintain test results

Quickly identify and locate a wide range of faults, including short bridge taps and other impairments that other sets have trouble finding.

CopperPro Series II now has the bandwidth to test and troubleshoot the latest broadband technologies.

Golden modem options permit verification of ADSL1/2/2+ and VDSL connectivity and performance.

for all your techniciansMake CopperPro™ Series II standard equipment

Integratestoday’stopOSPtestingandtroubleshooting tasks into one tool;

less to buy, maintain and train on

Builttoughforruggedfielduseandlowcost of ownership: sealed to

resist moisture, drop tested 1 meter

ADSL,ADSL2/2+,VDSL2GoldenModemmodules support a broad range of vendor

chip sets and can be updated viasoftwareinthefield

State-of-the-artTDRcanfindbridgetaps asshortas20feet(7meters),

evenwithCPEattached

Large graphic interface is fast and easytoread–whetheryourfrontlinetechis up a telephone pole or down a manhole

Serial interface for downloading software and uploading or printing reports

quickly and easily

Configurableone-buttonauto-test “toolboxes” support techs of all skill levels

for higher productivity and consistency

Single test modes support the needs of more expert technicians

On-line help

Powerorchargefrommains(100-240V) or 12V auto lighter (cable included)

Test, troubleshoot, and qualify your copper loop for a profitable triple play with one, easy-to-use tool.

Handheld–weighslessthan 4lbs.(1.8kg)

Morethan16hours typical battery life

Physical

Size (H x W x D) approximately9.8"x5.3"x3.2"(25cmx13.5cmx8.1cm) (does not include the softcase and test leads)

Weight 4.0lbs.(1.8kg)(doesnotincludethesoftcaseandtestleads)

Display 320x240pixelgraphicLCDwithbacklightandadjustablecontrast

LED Indicator charging status indicator (located on the side connector panel)

Communication Port RS-232PCandprinterport(DB-9)

Power

AC Operation operatesfromanexternalACadapter/charger

Battery Type operatesfromaninternalremovableNiMHrechargeablebatterypack(installed)

Battery Life afullychargedbatteryprovidesapproximately16hoursofnormaltestingusageand approximately4hoursofcontinuousTDRorbroadbandtestingusage

Battery Recharge Time 2to3hours(inthetester)forafullydischargedbatterypack

CopperPro Series II

Environmental

Operating Temperature -4°Fto+140°F(unlessotherwisespecified) (-20°Cto+60°C)

Storage Temperature -40°Fto+158°F(-40°Cto+70°C)

Battery Charging Temperature

50°Fto104°F(10°Cto40°C)

Humidity Tolerance (opera-tion without condensation)

95%

Rain Resistance IEC60529IP02,IngressProtection:waterdripping

Vibration Random,2g,5Hzto500Hz

Shock 1MeterDropTest

Altitude 4500m(15,000ft)

Standards Compliance

Analog Transmission Parameter Measurement

IEEE743-1995

ADSLx / VDSLx Metallic Interface

ANSIT1.413Issue2;ITUG.992.1a,b;G.992.2ab;G.992.3a,b,l,m;G.992.5a,b;G.993.1;G.993.2

Regulatory Compliance

Safety CAN/CSA-C22.2No61010-1

CE EN61326ClassAEmissionsandImmunity EN61010-1

C O P P E R P R O S E R I E S I I S P E C I F I C A T I O N S

General Specification 990-GM/2+ 990-GM/V-2

Size 4.2x6.6x1.3in.(11x17x3.3cm)

Weight 12.8oz.(364g)

Operating Temperature +12ºFto+122ºF(-10ºCto+50ºC)

Storage Temperature -40ºFto+158ºF(-40ºCto+70ºC)

990 II Battery Oper. Time (modem in “Showtime”)

Typical,4Hrs.Continuous Typical,3Hrs.Continuous

Standards complianceADSL ANSIADSL G.DMTADSL G.LiteADSL2ADSL2+VDSL1VDSL2

ANSIT1.413Issue2ITUG.992.1a,bITUG.992.2abITUG.992.3a,b,l,mITUG.992.5a,b

ANSIT1.413Issue2ITUG.992.1a,bITUG.992.2abITUG.992.3a,b,l,mITUG.992.5a,bITUG.993.1ITUG.993.2

990-GM2 ADSL2+ Golden Modem (optional)

990-GM2 ADSL+Golden Modem

Operational Specifications

Function Range Accuracy

AC Voltage 0Vto220V,60Hz 1%±0.5V

DC Voltage (RIN=100kVdefault;VMV or10MVoptional)

0Vto150V 150Vto240V 240to300V

1%±0.5V 2% 3%

DC Loop Current(430W) 0mAto120ma 2%±0.3mA

Resistance (ShortsandGrounds)

0Ωto100Ω 100Ωto4kΩ 4kΩto ΩM

0.1%±0.10 0.3%±0.10 3%

Leakage Stress 2 kΩto999MΩ 3%

Opens 0ftto3000ft 3kftto50kft 50kftto80kft

1%±5ft 3% 5%

Splits 0kftto50kft 10%DTE±50ft1

RFL FaultResistance(Rf) Loop resistance ResistancetoFault (@Rf=100kΩ) K-TestResistancetoFault

0MΩto30MΩ 0Ωto4000Ω 0Ωto100Ω 100Ωto4kΩ 0Ωto4kΩ

- - 0.1%RTS2±0.10Ω 0.3%RTS2±0.10Ω 1%RTS2±1Ω

Load Coils Count DistancetoFirst

0to6 0to12,000ft

±1 10%±500ft

Tracing Tone Frequency Level

577.5Hz >3.5Vpeak-to-peak

0.1% 10%

VF Noise Impedance Filters MetallicNoise PowerInfluence Power Harmonics

600Ω,900Ω, Bridged3 C,C-Notched,3kFlat,15kFlat,Psopho 0dBrnto10dBrn 10dBrnto100dBrn 40dBrnto120dBrn -60dBmto+20dBm (50Hzto3kHz)

1% - ±2dB ±1dB ±2dB ±2dB ±2dB

VF Loss Signal Level Frequency

-40dBmto+10dBm 100Hzto20kHz

SingleTone:±1dB SmartTone:±2dB 0.1%±2Hz

C O P P E R P R O S E R I E S I I S P E C I F I C A T I O N S

Function Range Accuracy

VF Longitudinal Balance DisturbingFrequency Impedance

0dBto70dB 200Hzto2000Hz 600Ω,900Ω

±2dB 0.1% 1%

Send VF Tone Frequency Amplitude (settable) Impedance

100Hzto20kHz -20dBmto+3dBm 600Ω,900Ω

0.1% ±0.5dB(1dBsteps) 1%

WB/BB Noise/Level Impedance Filters Frequency

100Ω,135Ω, Bridged4

E,F,G,1.3MHz,20MHz 10kHzto1.2MHz5 25kHzto18MHz6

1% - 0.1%,508.63Hzmultiples 0.1%,4312.5Hzmultiples

Amplitude +3dBmto-50dBm -50dBmto-90dBm -90dBmto-105dBm

±1dB7(Bridged=±3dBtypical) ±3dB7(Bridged=±3dBtypical) ±3dBtypical7

Noise Floor -140dBm/Hztypical -

WB/BB Loss Impedance Frequency Magnitude HDSL2/4LoopAttenuation WB/BBLongitudinalBalance DisturbingFrequency (Single Tone) (70ToneMulti-Tone) Impedance Filter

100Ω,135Ω 10kHzto1.2MHz5 25kHzto18MHz6

0dBto50dB 50dBto90dB 0dBto70dB 0dBto20dB 20dBto40dB 40dBto50dB 50dBto55dB 25kHzto18MHz 0.25MHzto18MHz 135Ω,<1.2MHz 100Ω,>1.2MHz 1.3MHz,<1.2MHz 20MHz,>1.2MHz

1% 0.1%,508.63Hzmultiples 0.1%,4312.5Hzmultiples ±1dB7 ±3dB7

±2dB ±3dB7,9 ±2dB7,9 ±3dB7,9 ±3dBtypical7,9

0.1%,4312.5Hzmultiples 0.1%,4312.5Hzmultiples 1% -

Operational Specifications (continued)

C O P P E R P R O S E R I E S I I S P E C I F I C A T I O N S

Function Range Accuracy

Send WB/BB Tone Frequency Amplitude Impedance

10kHzto1.2MHz5 25kHzto18MHz6 0.0dBm(fixed) 100Ω,135Ω

0.1%,508.63Hzmultiples 0.1%,4312.5Hzmultiples ±1dB 1%

WB/BB Impulse Noise Impedance Filters Test Time ImpulseCounter Counter Threshold CountInterval

100Ω,135Ω, Bridged4 E,F,G,1.3MHz,20MHz 1to1440minutes(24hrs.) 0to9999 0dBmto-40dBm -40dBmto-50dBm 8/second

1% - 1% - ±1dB8 ±3dB8(Typical) -

DSL Auto-Test Data Rate estimation ADSL/2(1.104MHz) ADSL2+(2.208MHz) VDSL(17.664MHz)

0–8Mb/s 0-16Mb/s 0-55Mb/s

±0.1Mb/s(typical) ±0.2Mb/s(typical) ±2Mb/s(typical)

TDR Specifications Launch Pulse Impedance Pulse-width VOP Selection Range(VOP=0.64,19Ga.) Range Selection Horizontal Resolution DistancetoReflection Vertical Gain Power Filter Averaging Filter Input Protection

100Ω 20ns,100ns,500ns,1000ns, 2500ns,5000ns 0.300to0.999 30,000ft 10ftto48kft(Auto.) 0.5ftto156ft 0ftto30,000ft 80dB 5kHzHighpass 4waveformaverage ±400Vpeak

1% 10%±5ns - - - - 1%±VOPuncertainty 2 dB - - -

Notes1 Dist.toEnd;Dist.toSplit>50ft;Splitpairsmustbesamelength±5%.2 RTS=ResistancetoStrap 3 Bridged=>100kΩ 4 Bridged=>5kΩ5 Nyquist(Fine)resolution6 DMT(Coarse)resolution7 @25°C±25°C;battery-powered8 AccuraciesspecifiedwithE,F,G,and1.3MHzfilters@centerfrequencies,with100Ωor135Ω terminations.

Additional+/-2dB(typ.)tolerancerequiredfor20MHzfilter 9 0.25MHzto12MHz.Additional±1dBtolerancerequiredfrom12MHzto17.5MHz.

Model Description

990DSL2+ CopperProNextGenCopperLoopAnalyzerwithTDRandwidebandspectralanalysisforADSL2+

990VDSL CopperProNextGenCopperLoopAnalyzerwithTDRandwidebandspectral analysis for VDSL

990-GM/2 ADSL/ADSL2/2+GoldenModemOptionforCopperProSeriesIILoop Testers/Analyzers

990-GM/V-2 ADSLandVDSLGoldenModemOptionforCopperProSeriesIILoopTesters/AnalyzerswithCPEandCOemulation

Ordering Information

N E T W O R K S U P E R V I S I O N

Fluke NetworksP.O.Box777,Everett,WAUSA98206-0777

Fluke Networksoperatesinmorethan50countriesworldwide.Tofindyourlocalofficecontactdetails,go to www.flukenetworks.com/contact.

©2008FlukeCorporation.Allrightsreserved.PrintedinU.S.A.10/20082734896B-ENG-NRevB

Network SuperVision SolutionsFlukeNetworks,aDanahercompany,providesinnovativesolutionsfor testing, monitoring and analyzing telecommunications and enterprise networksandforinstallingandcertifyingthefiberandcopperfoundationofthosenetworks.OurcomprehensivelineofNetworkSuperVision Solutions™ provides network installers, owners, and maintenance professionals with superior vision into their network, combining speed, accuracy and ease of use to optimize network performance.

HeadquarteredinEverett,Washington,FlukeNetworkshasmorethan 500employeesworldwideanddistributesourproductsinmore than50countries.

Worldwide supportLike our products, our support is focused on your evolving needs, with an eye on keeping you on top of the latest technology advances.

• Globalsupportin22countries

• Award-winningproductperformancereliability

• Supportprogramstailoredtoyourneeds

• Solutionsthatcontinuallyanticipateandevolvewithyournetwork, your business and your market opportunities

N E T W O R K S U P E R V I S I O N

ContactFlukeNetworks:Phone800-283-5853(US/Canada)or425-446-4519 (other locations). Email: info@flukenetworks.com.