th catalogue.pdfsupreme petrochem ltd, part of supreme group of companies, is the largest producer...

environment Create� ��

��

Exclusion of Liability

The information contained herein is provided for

general reference purpose only. By providing the

information contained herein, Supreme Petrochem

Ltd makes no guaranty or warranty, and does not

assume any liability, with respect to the accuracy or

completeness of such information, or the product

results in any speci�c instance and hereby

expressly disclaims any implied warranties of

merchantability or �tness for a particular purpose,

or any other warranties or representations

whatsoever, expressed or implied. Nothing

contained herein shall be construed as a license to

use the products of Supreme Petrochem Ltd in any

manner that would infringe any patent.

��

Corporate Office & Zonal Office (West)

Solitare Corporate Park, Building No. - 11,

5th Floor, 167, Guru Hargovindji Marg,

Andheri - Ghatkopar Link Road,

Chakala, Andheri (E), Mumbai - 400 093,

Maharashtra, India.

Ph.: (91 - 22) 6709 1900

Fax: (91 - 22) 6709 1924/25/26

Zonal Office (North)

Unit No. 1008, 10th Floor, WTT Tower - B,

Plot No. C - 1, Sector - 16,

Noida - 201 301

Ph.: (91 - 120) 4879 050, 4879 073

Zonal Office (South)

39 - I, North Parade Road, Chakrapani Colony,

St. Thomas Mount, Chennai - 600 016

Ph.: (91 - 44) 2231 3633/59/60

Fax: (91 - 44) 2231 3644/45

Zonal Office (East)

183, Rajdanga, Block BF II, 1st Floor,

Shantipally, Kolkata - 700 107

Ph.: (91 - 33) 2441 7069

Fax: (91 - 33) 2441 7039

Sales Office (Bengaluru)

No. 314/C, 1st Floor, Countour Road,

Padmanabha Nagar, Bengaluru - 560 070

Telefax: (91 - 80) 2679 1315

Sales Office (Hyderabad)

No. 202, Gruhashilpi Apartments, 14-47,

P & T Colony, Dilshuk Nagar,

Hyderabad - 500 060

Telefax: (91 - 40) 2006 0369

Email : [email protected],

[email protected]

Website : www.supremepetrochem.com,

www.insuboard.com

This revision (Oct,2018) supersedes all previous editions.

Under deck Insulation Floor Insulation Cavity Walls External Wall Insulation Systems

– Extruded Polystyrene (XPS) Thermal Insulation Board is a rigid foam board having closed cell structure and is produced in a fully automated continuous extrusion process in accordance with international speci�cationsand standards. Its unique properties of high compressive strength, higher R value and low water absorption makes it an ideal insulating material for roofs, walls and �oors.

Description

Supreme Petrochem Ltd, part of Supreme Group of companies, is the largest producer of Polystyrene & Expandable Polystyrene beads in India, key raw materials for making Thermal Insulation Boards/Sheets. State-of-art manufacturing facilities are located in Nagothane, Maharashtra and Chennai, Tamilnadu.

Introduction

20,25,30,50,75 and 100 mm

Available Thickness

600 mm x 1250 mmOther lenghts are available upon request

Standard Size

• High resistance to heat flow, i.e. low thermal conductivity.

• High insulation value long term.

• Resistance to water vapour diffusion and water absorption.

• Long term durability.

• Uniform density distribution.

Key Features

• High compressive strength, compared to other insulation materials.

• Light weight and easy to handle.

• Resistance to bacteria and micro organism growth.

• Non-toxic.

The cost of energy and demand for air conditioning in buildings is constantly increasing. With increased energy conservation becoming more and more relevant, the ability of the product selected to effectively insulate a building of whatever type is very important.

Insulation should be viewed as a long term investment. Consequently, one of the best ways to optimize this investmentis by choosing high quality and effective insulation material for buildings.

Heat Flow: provides an excellent resistance to heat �ow. There is no change in the K value (Thermal conductivity) of the material after prolonged usage and hence the heat �ow into/out of the system remains intact.

Water Vapour: Closed cell structure of provides exceptional resistance to water permeability and will absorb less than 1% water by volume.

Density: has a uniformly high density and compressive strength, making it an ideal solution for over deck insulation and �oor insulation in cold storages.

Fire: is tested as per DIN 4102 and is available in both class B2 & B1.

Dimensional Stability: The regularity and homogeneity of cellular composition ensures good dimensional stability.

Application: is ideal for energy conservation in a wide range of industrial, commercial buildings and in private dwellings.

is mainly used for thermal insulation of �at and pitched roofs, under deck insulation, external, internal and cavity wall insulation, industrial and cold storage �oors and underground constructions.

Properties

Technical Specifications

TEST PARAMETER UNIT TEST METHOD SPECIFICATIONS

Board Thickness

mm 20 25 30

40 mm and above

Compressive Strength @ kPa ASTM C 1621

180 240 290 350 10% De�ection, minimum (psi) (26) (35) (42) (51)

Equivalent Thermal W/m.K ASTM C 518 0.0289* 0.0289* 0.0289* 0.0289* Conductivity, maximum

Flexural Strength, minimum kPa ASTM C 203 345 345 414 414

Water Vapor permeance of ng/Pa.s.m2 ASTM E 96 63* 63* 63* 63* 25.4 mm thickness, maximum

Water Absorption by % v/v ASTM C 272 0.3 0.3 0.3 0.3 total immersion, maximum

Dimensional Stability (change in % ASTM D 2126 2 2 2 2 Dimensions), maximum

Oxygen Index, minimum % v/v ASTM D 2863 24 24 24 24

Density, minimum kg/m3 ASTM D 1622 34 34 34 34

Flammability Class DIN 4102 Part1 B2* B2* B2* B2*

Surface Burning Characteristics Class ASTM E 84 A A A A

Board size 600X1250mm 600X1250mm 600X1250mm 600X1250mm

CementPlaster

Adhesive

AluminiumCompositePanel

Framework Adhesive

CementPlaster

AdhesiveReinforcedExteriorPlaster

WallFinish

CementPlaster

CAVITY WALLINSULATION

WALL INSULATION BEHINDALUMINIUM COMPOSITE PANEL

EXTERIOR WALLINSULATION

Vegetation

Growing Medium(8- Inches)

Filter Fleece/Root Repellent

Drainage Layer

Insulation Layer

WaterprooofMembrane

Structural Support

meets the ASTM C 578 Type VI standard requirements for boards with thickness of 30 mm and above;and for thickness less than 30 mm meets ASTM C 578 Type IV standard requirements.

is made from CFC/HCFC Free Blowing Agents.

For parameters with (*) mark, the product is “TYPE TESTED” once in six months in BIS / MoEF / DGS&D / DDCAapproved laboratory.

Above speci�cations are for our “STANDARD product”.

with lower thermal conductivity, higher compressive strength, higher density or B1 �re rating are available, on speci�c requests. Please contact SPL Marketing Representative for the same.

Application Guide: Customers are advised to use appropriate Building Codes and Regulations applicable in their region before using . Supreme Petrochem Ltd assumes no liability, whether expressed or implied, of the intended application.

Disclaimer: Data presented in this speci�cation sheet are typical values and are intended to serve as guide only.SPL reserves the right to review and alter the contents of this speci�cation sheet without prior notice.

Cement ScreedPVC/Glass Fiber Wire MeshReinforcement

Geo Textile/PolyesterNon-Woven Cloth

Roof Surface

Loosely LaidInterlockingXPS Boards

Vapour Barrier(Plastic Film)

Brick Wall

GI Section

Gypsum Board

XPS Thermal Insulation Boards

should be stored on a �at surface, material should be stored in covered areas away from direct sunlight and ultraviolet rays.

Storage