t l identity manager - ibmpublib.boulder.ibm.com/tividd/td/itim/sc32-1184-01/... · ® identity...

Tivoli® Identity Manager

Solaris Adapter Installation and Configuration Guide

Version 4.6

SC32-1184-01

��

Note:

Before using this information and the product it supports, read the information in Appendix C, “Notices,” on page 59.

Second Edition (June 2005)

This edition applies to version 4.6 of this adapter and to all subsequent releases and modifications until otherwise

indicated in new editions.

© Copyright International Business Machines Corporation 2003, 2005. All rights reserved.

US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract

with IBM Corp.

Contents

Preface . . . . . . . . . . . . . . . v

Who should read this book . . . . . . . . . v

Publications and related information . . . . . . v

Tivoli Identity Manager library . . . . . . . v

Prerequisite Product Publications . . . . . . vii

Related Publications . . . . . . . . . . viii

Accessing publications online . . . . . . . viii

Accessibility . . . . . . . . . . . . . . viii

Support information . . . . . . . . . . . viii

Conventions used in this book . . . . . . . . ix

Typeface conventions . . . . . . . . . . ix

Operating system differences . . . . . . . . ix

Definitions for HOME and other directory

variables . . . . . . . . . . . . . . ix

Chapter 1. Overview of the Solaris

adapter . . . . . . . . . . . . . . . 1

Features of the adapter . . . . . . . . . . . 1

Chapter 2. Installing and configuring the

Solaris adapter . . . . . . . . . . . . 3

Prerequisites . . . . . . . . . . . . . . 3

Testing the network connectivity . . . . . . . . 3

Installing the adapter . . . . . . . . . . . 3

Importing the adapter profile into the Tivoli Identity

Manager Server . . . . . . . . . . . . . 5

Importing the adapter profile . . . . . . . . 5

Creating a Solaris service . . . . . . . . . . 6

Configuring the adapter . . . . . . . . . . 7

Chapter 3. Configuring the Solaris

adapter for IBM Tivoli Identity Manager . 9

Starting the adapter configuration tool . . . . . . 9

Viewing configuration settings . . . . . . . . 10

Changing protocol configuration settings . . . . 10

Configuring event notification . . . . . . . . 13

Setting event notification triggers . . . . . . 16

Modifying an event notification context . . . . 17

Changing the configuration key . . . . . . . 19

Changing activity logging settings . . . . . . . 19

Changing registry settings . . . . . . . . . 21

Modifying non-encrypted registry settings . . . 21

Changing advanced settings . . . . . . . . . 23

Viewing statistics . . . . . . . . . . . . 24

Changing code page settings . . . . . . . . 24

Accessing help and additional options . . . . . 25

Chapter 4. Configuring SSL

authentication for the Solaris adapter . 29

Overview of SSL and digital certificates . . . . . 29

Private keys, public keys, and digital certificates 30

Self-signed certificates . . . . . . . . . . 30

Certificate and key formats . . . . . . . . 31

The use of SSL authentication . . . . . . . . 31

Configuring certificates for SSL authentication . . . 32

Configuring certificates for one-way SSL

authentication . . . . . . . . . . . . 32

Configuring certificates for two-way SSL

authentication . . . . . . . . . . . . 33

Configuring certificates when the adapter

operates as an SSL client . . . . . . . . . 34

Managing SSL certificates using CertTool . . . . 35

Starting CertTool . . . . . . . . . . . 35

Generating a private key and certificate request 37

Installing the certificate . . . . . . . . . 38

Installing the certificate and key from a PKCS12

file . . . . . . . . . . . . . . . . 38

Viewing the installed certificate . . . . . . . 39

Installing a CA certificate . . . . . . . . . 39

Viewing CA certificates . . . . . . . . . 39

Deleting a CA certificate . . . . . . . . . 39

Viewing registered certificates . . . . . . . 40

Registering a certificate . . . . . . . . . 40

Unregistering a certificate . . . . . . . . 40

Exporting a certificate and key to PKCS12 file . . 40

Chapter 5. Customizing the Solaris

adapter . . . . . . . . . . . . . . 43

Copy the SolarisProfile.jar file and extract the files 43

Create a new JAR file and install the new attributes

on the Tivoli Identity Manager Server . . . . . 44

Managing passwords when restoring accounts . . . 44

Chapter 6. Upgrading the Solaris

adapter or the ADK . . . . . . . . . 47

Upgrading the Solaris adapter . . . . . . . . 47

Upgrading the ADK . . . . . . . . . . . 47

Log files . . . . . . . . . . . . . . 48

Chapter 7. Uninstalling the Solaris

adapter . . . . . . . . . . . . . . 49

Appendix A. Adapter attributes . . . . 51

Attribute descriptions . . . . . . . . . . . 51

Solaris adapter attributes by action . . . . . . 53

Ping . . . . . . . . . . . . . . . . 53

System Login Add . . . . . . . . . . . 53

System Login Change . . . . . . . . . . 53

System Login Delete . . . . . . . . . . 54

System Login Suspend . . . . . . . . . 54

System Login Restore . . . . . . . . . . 54

Reconciliation . . . . . . . . . . . . 54

Appendix B. Support information . . . 55

Searching knowledge bases . . . . . . . . . 55

Search the information center on your local

system or network . . . . . . . . . . . 55

Search the Internet . . . . . . . . . . . 55

© Copyright IBM Corp. 2003, 2005 iii

Obtaining fixes . . . . . . . . . . . . . 56

Contacting IBM Software Support . . . . . . . 56

Determine the business impact of your problem 57

Describe your problem and gather background

information . . . . . . . . . . . . . 57

Submit your problem to IBM Software Support 57

Appendix C. Notices . . . . . . . . . 59

Trademarks . . . . . . . . . . . . . . 60

Index . . . . . . . . . . . . . . . 63

iv IBM Tivoli Identity Manager: Solaris Adapter Installation and Configuration Guide

Preface

The IBM® Tivoli® Identity Manager Solaris Adapter (Solaris Adapter) enables

connectivity between the IBM Tivoli Identity Manager Server and a network of

systems running the Sun® Microsystems Solaris implementation of the UNIX

operating system. The Solaris Server can be either a SPARC or non-SPARC system.

Once the adapter is installed and configured, Tivoli Identity Manager manages

access to Solaris resources with your site’s security system. This book describes

how to install and configure the Solaris Adapter.

Note: The program that is used to connect the managed resource to the Tivoli

Identity Manager Server is now called an adapter. The term adapter replaces

the previously used term agent. The user interface used to configure the

adapter still refers to an adapter as an agent.

Who should read this book

This book is intended for Sun Microsystems Solaris system and security

administrators responsible for installing software on their site’s computer systems.

Readers are expected to understand Sun Microsystems concepts. The person

completing the installation procedure must also be familiar with their site’s system

standards and needs to have appropriate Solaris experience and knowledge.

Readers must be able to perform routine Sun Microsystems system and security

administration tasks.

Publications and related information

Read the descriptions of the Tivoli Identity Manager library. To determine which

additional publications you might find helpful, read the “Prerequisite Product

Publications” on page vii and the “Related Publications” on page viii. After you

determine the publications you need, refer to the instructions in “Accessing

publications online” on page viii.

Tivoli Identity Manager library

The publications in the Tivoli Identity Manager technical documentation library are

organized into the following categories:

v Release information

v Online user assistance

v Server installation and configuration

v Problem determination

v Technical supplements

v Adapter installation and configuration

Release Information:

v IBM Tivoli Identity Manager Release Notes

Provides software and hardware requirements for Tivoli Identity Manager, and

additional fix, patch, and other support information.

v IBM Tivoli Identity Manager Documentation Read This First Card

Lists the Tivoli Identity Manager publications.

© Copyright IBM Corp. 2003, 2005 v

Online user assistance:

Provides online help topics and an information center for all Tivoli Identity

Manager administrative tasks. The information center includes information that

was previously provided in the IBM Tivoli Identity Manager Configuration Guide and

the IBM Tivoli Identity Manager Policy and Organization Administration Guide.

Server installation and configuration:

IBM Tivoli Identity Manager Server Installation and Configuration Guide for WebSphere

Environments provides installation and configuration information for Tivoli Identity

Manager.

Configuration information that was previously provided in the IBM Tivoli Identity

Manager Configuration Guide is now included in either the installation guide or in

the IBM Tivoli Identity Manager Information Center.

Problem determination:

IBM Tivoli Identity Manager Problem Determination Guide provides problem

determination, logging, and message information for the Tivoli Identity Manager

product.

Technical supplements:

The following technical supplements are provided by developers or by other

groups who are interested in this product:

v IBM Tivoli Identity Manager Performance Tuning Guide

Provides information needed to tune Tivoli Identity Manager Server for a

production environment, available on the Web at:

http://publib.boulder.ibm.com/tividd/td/tdprodlist.html

Click the I character in the A-Z product list, and then, click the Tivoli Identity

Manager link. Browse the information center for the Technical Supplements

section.

v Redbooks and white papers are available on the Web at:

http://www.ibm.com/software/sysmgmt/products/support/IBMTivoliIdentityManager.html

Browse to the Self Help section, in the Learn category, and click the Redbooks

link.

v Technotes are available on the Web at:

http://www.redbooks.ibm.com/redbooks.nsf/tips/

v Field guides are available on the Web at:

http://www.ibm.com/software/sysmgmt/products/support/Field_Guides.html

v For an extended list of other Tivoli Identity Manager resources, search the

following IBM developerWorks Web address:

http://www.ibm.com/developerworks/

Adapter installation and configuration:

The Tivoli Identity Manager Server technical documentation library also includes

an evolving set of platform-specific installation documents for the adapter

components of a Tivoli Identity Manager Server implementation. Locate adapters

on the Web at:

vi IBM Tivoli Identity Manager: Solaris Adapter Installation and Configuration Guide


http://www-306.ibm.com/software/sysmgmt/products/support/IBMTivoliIdentityManager.html





http://www.lotus.com/services/passport.nsf/WebDocs/Passport_Advantage_Home

Click Support & downloads. Browse to the Downloads and drivers. Click the link

for the current inventory of adapters.

Skills and training:

The following additional skills and technical training information were available at

the time that this manual was published:

v Virtual Skills Center for Tivoli Software on the Web at:

http://www.cgselearning.com/tivoliskills/

v Tivoli Education Software Training Roadmaps on the Web at:

http://www.ibm.com/software/tivoli/education/eduroad_prod.html

v Tivoli Technical Exchange on the Web at:

http://www.ibm.com/software/sysmgmt/products/support/supp_tech_exch.html

Prerequisite Product Publications

To use the information in this book effectively, you must have knowledge of the

products that are prerequisites for Tivoli Identity Manager Server. Publications are

available from the following locations:

v Solaris Server

– http://docs.sun.com/db?q=solaris+9v Operating systems

– IBM AIX®

http://www16.boulder.ibm.com/pseries/en_US/infocenter/base/aix52.htm

– Sun Solaris

http://docs.sun.com/db?q=solaris+9

– Red Hat Linux®

http://www.redhat.com/docs/

– Microsoft® Windows Server 2003

http://www.microsoft.com/windowsserver2003/proddoc/default.mspxv Database servers

– Oracle

http://www.oracle.com/technology/documentation/index.html

http://otn.oracle.com/tech/index.html

http://otn.oracle.com/tech/linux/index.html

– Microsoft SQL Server 2000

http://www.msdn.com/library/

http://www.microsoft.com/sql/v Directory server applications

– IBM Directory Server http://publib.boulder.ibm.com/tividd/td/IBMDS/IDSapinst52/en_US/HTML/ldapinst.htm http://www.ibm.com/software/network/directory

– Sun ONE Directory Server

http://docs.sun.com/app/docs/coll/S1_DirectoryServer_52

Preface vii



http://www.cgselearning.com/tivoliskills/

http://www.ibm.com/software/tivoli/education/eduroad_prod.html




http://www16.boulder.ibm.com/pseries/en_US/infocenter/base/aix52.htm


http://www.redhat.com/docs/

http://www.microsoft.com/windowsserver2003/proddoc/default.mspx

http://www.oracle.com/technology/documentation/index.html

http://otn.oracle.com/tech/index.html

http://otn.oracle.com/tech/linux/index.html

http://www.msdn.com/library/

http://www.microsoft.com/sql/

http://publib.boulder.ibm.com/tividd/td/IBMDS/IDSapinst52/en_US/HTML/ldapinst.htm

http://publib.boulder.ibm.com/tividd/td/IBMDS/IDSapinst52/en_US/HTML/ldapinst.htm

http://www.ibm.com/software/network/directory

http://docs.sun.com/app/docs/coll/S1_DirectoryServer_52

Related Publications

Information that is related to Tivoli Identity Manager Server is available in the

following publications:

v The Tivoli Software Library provides a variety of Tivoli publications such as

white papers, datasheets, demonstrations, redbooks, and announcement letters.

The Tivoli Software Library is available on the Web at:

http://www.ibm.com/software/tivoli/literature/

v The Tivoli Software Glossary includes definitions for many of the technical terms

related to Tivoli software. The Tivoli Software Glossary is available from the

Glossary link of the Tivoli Software Library Web page at:

http://publib.boulder.ibm.com/tividd/glossary/tivoliglossarymst.htm

Accessing publications online

IBM posts publications for this and all other Tivoli products, as they become

available and whenever they are updated, to the Tivoli software information center

Web site. Access the Tivoli software information center at the following Web

address:


Click the I character in the A-Z list, and then click the Tivoli Identity Manager

link to access the product library.

Note: If you print PDF documents on other than letter-sized paper, set the option

in the File → Print window that allows Adobe Reader to print letter-sized

pages on your paper.

Accessibility

The product documentation includes the following features to aid accessibility:

v Documentation is available in convertible PDF format to give the maximum

opportunity for users to apply screen-reader software.

v All images in the documentation are provided with alternative text so that users

with vision impairments can understand the contents of the images.

Support information

If you have a problem with your IBM software, you want to resolve it quickly. IBM

provides the following ways for you to obtain the support you need:

v Searching knowledge bases: You can search across a large collection of known

problems and workarounds, Technotes, and other information.

v Obtaining fixes: You can locate the latest fixes that are already available for your

product.

v Contacting IBM Software Support: If you still cannot solve your problem, and

you need to work with someone from IBM, you can use a variety of ways to

contact IBM Software Support.

For more information about these ways to resolve problems, see Appendix B,

“Support information,” on page 55.

viii IBM Tivoli Identity Manager: Solaris Adapter Installation and Configuration Guide

http://www.ibm.com/software/tivoli/literature/

http://publib.boulder.ibm.com/tividd/glossary/tivoliglossarymst.htm


Conventions used in this book

This reference uses several conventions for special terms and actions and for

operating system-dependent commands and paths.

Typeface conventions

This guide uses the following typeface conventions:

Bold

v Lowercase commands and mixed case commands that are otherwise

difficult to distinguish from surrounding text

v Interface controls (check boxes, push buttons, radio buttons, spin

buttons, fields, folders, icons, list boxes, items inside list boxes,

multicolumn lists, containers, menu choices, menu names, tabs, property

sheets), labels (such as Tip:, and Operating system considerations:)

v Keywords and parameters in text

Italic

v Words defined in text

v Emphasis of words (words as words)

v New terms in text (except in a definition list)

v Variables and values you must provide

Monospace

v Examples and code examples

v File names, programming keywords, and other elements that are difficult

to distinguish from surrounding text

v Message text and prompts addressed to the user

v Text that the user must type

v Values for arguments or command options

Operating system differences

This guide uses the UNIX® convention for specifying environment variables and

for directory notation.

When using the Windows command line, replace $variable with %variable% for

environment variables and replace each forward slash (/) with a backslash (\) in

directory paths. The names of environment variables are not always the same in

Windows and UNIX. For example, %TEMP% in the Windows operating system is

equivalent to $tmp in a UNIX operating system.

Note: If you are using the bash shell on a Windows system, you can use the UNIX

conventions.

Definitions for HOME and other directory variables

The following table contains the default definitions that are used in this guide to

represent the HOME directory level for various product installation paths. You can

customize the installation directory and HOME directory for your specific

implementation. If this is the case, you need to make the appropriate substitution

for the definition of each variable represented in this table.

The value of path varies for these operating systems:

v Windows: drive:\Program Files

Preface ix

v AIX: /usr

v Other UNIX: /opt

Path Variable Default Definition Description

DB_INSTANCE_HOME Windows:

path\IBM\SQLLIB

UNIX:

v AIX, Linux: /home/dbinstancename

v Solaris: /export/home/dbinstancename

The directory that

contains the

database for Tivoli

Identity Manager.

LDAP_HOME v For IBM Directory Server Version 5.2

Windows:

path\IBM\LDAP

UNIX:

– AIX, Linux: path/ldap

– Solaris: path/IBMldaps

path/IBM/LDAP

v For IBM Directory Server Version 6.0

Windows:

path\IBM\LDAP\V6.0

UNIX:

path/IBM/LDAP/V6.0

– AIX, Solaris

– Linux: opt/ibm/ldap/V6.0

v For Sun ONE Directory Server

Windows:

path\Sun\MPS

UNIX:

/var/Sun/mps

The directory that

contains the

directory server

code.

IDS_instance_HOME For IBM Directory Server Version 6.0

Windows:

drive\

ibmslapd-instance_owner_name

The value of drive might be C:\ on

Windows systems. An example of

instance_owner_name might be ldapdb2.

For example, the log file might be

C:\idsslapd-ldapdb2\logs\ibmslapd.log.

UNIX:

INSTANCE_HOME/idsslapd-instance_name

On Linux and AIX systems, the default

home directory is the

/home/instance_owner_name directory. On

Solaris systems, for example, the directory

is the /export/home/ldapdb2/idsslapd-ldapdb2 directory.

The directory that

contains the IBM

Directory Server

Version 6.0 instance.

x IBM Tivoli Identity Manager: Solaris Adapter Installation and Configuration Guide

Path Variable Default Definition Description

HTTP_HOME Windows:

path\IBMHttpServer

UNIX:

path/IBMHttpServer

The directory that

contains the IBM

HTTP Server code.

ITIM_HOME Windows:

path\IBM\itim

UNIX:

path/IBM/itim

The base directory

that contains the

Tivoli Identity

Manager code,

configuration, and

documentation.

Tivoli_Common_Directory Windows:

path\ibm\tivoli\common\CTGIM

UNIX:

path/ibm/tivoli/common/CTGIM

The central location

for all

serviceability-related

files, such as logs

and first-failure

capture data

Preface xi

xii IBM Tivoli Identity Manager: Solaris Adapter Installation and Configuration Guide

Chapter 1. Overview of the Solaris adapter

An adapter is a program that provides an interface between a managed resource

and the Tivoli Identity Manager Server. Adapters might or might not reside on the

managed resource and the Tivoli Identity Manager Server manages access to the

resource by using your security system. Adapters function as trusted virtual

administrators on the target platform, performing such tasks as creating login IDs,

suspending IDs, and performing other functions administrators normally run

manually. The adapter runs as a service, independent of whether or not a user is

logged on to the Tivoli Identity Manager Server.

The IBM Tivoli Identity Manager Solaris Adapter enables connectivity between the

Tivoli Identity Manager Server and a system running the Solaris Server. This

installation guide provides the basic information that you need to install and

configure the Solaris Adapter. This chapter provides an overview of the adapter

and the features of the adapter.

Features of the adapter

You can use the Solaris Adapter to automate the following administrative tasks:

v Creating a user ID to authorize access to the Solaris Server.

v Modifying an existing user ID for access to a Solaris Server.

v Deleting a user ID to remove access to the Solaris Server.

v Suspending a user account by temporarily deactivating access to the Solaris

Server.

v Restoring a user account by reactivating access to the Solaris Server.

v Changing a user account password on the Solaris Server.

v Reconciling the user information of all current users on a Solaris Server.

v Reconciling the user information of a particular user account on a Solaris Server

by performing a lookup.

The Solaris Adapter does not create or manage NIS or NIS+ accounts. Use the

Solaris NIS Adapter or Solaris NIS+ Adapter for this purpose.

The Solaris Adapter uses either Pluggable Authentication Module (PAM) or

resource commands for password change operations on the Solaris Server. Using

the registry keys, you can determine which method is used. For more information

on the registry keys, see Table 9 on page 22.

© Copyright IBM Corp. 2003, 2005 1

2 IBM Tivoli Identity Manager: Solaris Adapter Installation and Configuration Guide

Chapter 2. Installing and configuring the Solaris adapter

Installing and configuring the Solaris Adapter involves several steps that you must

complete in the appropriate sequence. Review the prerequisites before you begin

the installation process. You can also create an account on the managed resource

for the adapter to use.

Prerequisites

Table 1 identifies hardware, software, and authorization prerequisites to install the

Solaris Adapter. Verify that all of the prerequisites have been met before installing

the Solaris Adapter.

Table 1. Prerequisites to install the adapter

System v SPARC or non-SPARC system

v A minimum of 256 MB of memory.

v At least 300 MB of free disk space.

Operating System v Solaris version 8

v Solaris version 9

Network Connectivity v TCP/IP network

System Administrator

Authority

The person completing the Solaris Adapter installation

procedure must have system administrator authority to

complete the steps in this chapter.

Tivoli Identity Manager Server Version 4.6

Testing the network connectivity

In order to ensure that the Solaris Adapter will function properly, you must test

the basic network connectivity and file transfer capability of your system. Testing

is done between the workstation where the Solaris Adapter will be installed, and

the workstation where the Tivoli Identity Manager Server is or will be installed.

You must issue a ping command from the Tivoli Identity Manager Server to the

designated adapter system to verify communication.

1. Log on to the Solaris system as root or superuser.

2. Test communication between the system where the Tivoli Identity Manager

Server is installed and the Solaris system. For example, type ping

Solaris_host_name

Installing the adapter

The Tivoli Identity Manager Solaris Adapter installation program is available for

download from the IBM Web site. Contact your IBM account representative for the

Web address and download instructions.

In order to install the adapter, complete the following steps:

1. Download the Solaris Adapter compressed file from the IBM Web site.


2. Extract the contents of the Solaris Adapter installation compressed file into a

temporary directory and navigate to that directory.

3. Type ./setupsolaris.bin and press Enter to run the installation script.

If you use FTP to transfer the files to the Solaris server, verify that the file

names are in lower case letters. If they are not in lower case letters, rename

the files to use lower case letters.

4. On the Welcome window, click Next.

5. On the License Agreement window, review the license agreement and decide

if you accept the terms of the license. If you do, click Accept and then click

Next.

6. On the Select Destination Directory window, specify where you want to install

the adapter in the Directory Name field. You can accept the default location,

or click Browse to specify a different directory. Then, click Next.

7. On the Use Shadow Passwords window, select whether you want to use

shadow passwords and click Next.

8. On the Start Agent at Boot time window, select whether you want to run the

Solaris Adapter at boot time and click Next.

9. On the Start Agent after Installation window, select whether you want to start

the Solaris Adapter when installation is complete and click Next.

10. On the Install Summary window, review the installation settings. Click Back

to change any of these settings. Otherwise, click Next to begin the installation.

11. On the Install Completed window, click Finish to exit the program.

InstallShieldInstallShield

Click Next to install < > to this directory, orclick Browse to install to a different directory.

agentname

Directory Name:

Installer

/home/tivoli/< >agentname

Browse...

CancelNext >< Back

Figure 1. Select Destination Directory dialog window


Importing the adapter profile into the Tivoli Identity Manager Server

Before you can add an adapter as a service to the Tivoli Identity Manager Server,

the server must have an adapter profile to recognize the adapter as a service. The

files that are packaged with the Solaris Adapter include the adapter JAR file,

SolarisProfile.jar. Using the Import feature of the Tivoli Identity Manager Server,

you can import the adapter profile into the server as a service profile.

The SolarisProfile.jar file includes all of the files that are needed to define the

adapter schema, account form, service form, and profile properties. The

SolarisProfile.jar file will be referenced in this document to make any changes to

the schema or the profile. You will be required to extract the files from the JAR file,

make changes to the necessary files, and repackage the JAR file with the updated

files. For more information on how to update the JAR files, see “Copy the

SolarisProfile.jar file and extract the files” on page 43.

Importing the adapter profile

An adapter profile defines the types of resources that the Tivoli Identity Manager

Server can manage. You must import the adapter profile into the Tivoli Identity

Manager Server before using the Solaris Adapter. The profile is used to create a

Solaris Adapter service on the Tivoli Identity Manager Server and to communicate

with the adapter.

Before you begin to import the adapter profile, verify that the following conditions

are met:

v The Tivoli Identity Manager Server must be installed and running.

v You must have root or Administrator authority on the Tivoli Identity Manager

Server.

In order to import the adapter profile, complete the following steps:

1. Log into the Tivoli Identity Manager Server using an account that has the

authority to perform administrative tasks.

2. On the Main Menu Navigation Bar, select the Configuration tab.

3. On the Configuration window, select Import/Export → Import tabs.

4. On the Import window, in the File to Upload field, type the location of the

SolarisProfile.jar file, or click Browse to locate the file.

5. Click the Import data into Identity Manager link to import the adapter profile

into the Tivoli Identity Manager Server.

v If the adapter profile import completes successfully, the following message is

displayed:

Profile installation complete.

v If the adapter profile import fails, the following message is displayed:

Profile installation failed.

When you import the adapter profile, if you receive an error related to the

schema, the trace.log file will contain information about that error. The

trace.log file location is specified by the handler.file.fileDir property that

is defined in the Tivoli Identity Manager enRoleLogging.properties file,

which is in the Tivoli Identity Manager \data directory.

Chapter 2. Installing and configuring the Solaris adapter 5

Creating a Solaris service

After the adapter profile is imported into the Tivoli Identity Manager Server, you

must create a provisioning service to allow Tivoli Identity Manager to

communicate with the adapter.

In order to create a provisioning service, complete the following steps:

1. Log into the Tivoli Identity Manager Server using an account that has the

authority to perform administrative tasks.

2. On the Main Menu Navigation Bar, click the Provisioning tab.

3. On the Provisioning window, click the Manage Services tab.

4. On the Manage Services window, click Add.

5. From the list of service types, select Solaris Service Profile, and then click

Continue. The Solaris Service Profile service form is displayed. The service

form contains the following fields:

Service Name

Specify a name that defines this Solaris service on the Tivoli Identity

Manager Server. Service Name is a required field.

Description

Specify a description for this service. Description is an optional field.

URL Specify the location and port number of the Solaris Adapter. The port

number is defined in the protocol configuration using the agentCfg

program. For additional information about protocol configuration

settings, see “Changing protocol configuration settings” on page 10.

URL is a required field.

If https is specified as part of the URL, the adapter must be configured

to use SSL authentication. If the adapter is not configured to use SSL

authentication, specify http for the URL. For additional information

about configuring the adapter to use SSL authentication, see Chapter 4,

“Configuring SSL authentication for the Solaris adapter,” on page 29.

User ID

Specify the Directory Access Markup Language (DAML) protocol user

name. The user name is defined in the protocol configuration using the

agentCfg program. For additional information about the protocol

configuration settings, see “Changing protocol configuration settings”

on page 10. User ID is a required field.

Password

Specify the password for the DAML protocol user name. This password

is defined in the protocol configuration using the agentCfg program.

For additional information about the protocol configuration settings, see

“Changing protocol configuration settings” on page 10. Password is a

required field.

Owner

Specify the service owner, if any. Owner is an optional field.

Service Prerequisite

Specify an existing Tivoli Identity Manager service that is a prerequisite

for the Solaris service. Service Prerequisite is an optional field.6. To verify the connection, press Test.

7. To create the service, press Submit.


Configuring the adapter

Once you have installed the Tivoli Identity Manager Solaris Adapter, configuration

is required to ensure that it functions properly.

In order to configure the Solaris Adapter, complete the following steps:

1. Start the Solaris Adapter service.

From the /bin directory of the adapter, type ./StartAgent.sh.

2. Configure DAML to ensure communication with the Tivoli Identity Manager

Server. For more information on configuring DAML, see “Changing protocol

configuration settings” on page 10.

3. Configure the Solaris Adapter to communicate with the Tivoli Identity Manager

Server by configuring the adapter for event notification. For more information

on configuring event notification, see “Configuring event notification” on page

13.

4. For secure communication, install a certificate on the machine where the

adapter resides and on the Tivoli Identity Manager Server. For more

information on installing certificates, see Chapter 4, “Configuring SSL

authentication for the Solaris adapter,” on page 29.

5. Installing the adapter profile on the Tivoli Identity Manager Server. For more

information on installing the adapter profile, see “Importing the adapter profile

into the Tivoli Identity Manager Server” on page 5.

6. Configure the adapter service form. For more information on configuring the

service form, see “Creating a Solaris service” on page 6.

7. Use the agentCfg utility to modify the adapter parameters. For more

information on parameter configuration, see Chapter 3, “Configuring the Solaris

adapter for IBM Tivoli Identity Manager,” on page 9.

8. Configure the adapter account form. For more information on configuring the

account form, refer to the IBM Tivoli Identity Manager Information Center.

Chapter 2. Installing and configuring the Solaris adapter 7

Chapter 3. Configuring the Solaris adapter for IBM Tivoli

Identity Manager

Use the adapter configuration program, agentCfg, to view or modify the Solaris

Adapter parameters. All changes that you make to parameters with this tool take

effect immediately.

Starting the adapter configuration tool

In order to start the adapter configuration tool, agentCfg, for Solaris Adapter

parameters, complete these steps:

1. Log into the Solaris Adapter system.

2. At the command prompt, change to the \bin directory for the adapter. For

example, type the following command, if the Solaris Adapter is in the default

location:

# cd /opt/tivoli/agents/SolarisAgent/bin

3. Type the following command:

agentCfg -agent SolarisAgent

You can also use agentCfg to view or change configuration settings from a

remote computer. See the table in “Accessing help and additional options” on

page 25 for procedures on using additional arguments.

4. At the Enter configuration key for Agent ’SolarisAgent’ prompt, type the

configuration key for the Solaris Adapter.

The default configuration key is agent. You must change the configuration key

once installation completes, to prevent unauthorized access to the configuration

of the adapter. See “Changing protocol configuration settings” on page 10 for

procedures to change the configuration key.

The Main Configuration Menu is displayed.

SolarisAgent 4.6 Agent Main Configuration Menu

-------------------------------------------

A. Configuration Settings.

B. Protocol Configuration.

C. Event Notification.

D. Change Configuration Key.

E. Activity Logging.

F. Registry Settings.

G. Advanced Settings.

H. Statistics.

I. Codepage Support.

X. Done.

Select menu option:

From the Main Menu, you can configure the protocol, view statistics, and modify

settings, including configuration, registry, and advanced settings.

Table 2. Options for the main configuration menu

Option Configuration task For more information

A Viewing configuration settings See page 10.


Table 2. Options for the main configuration menu (continued)


B Changing protocol configuration

settings

See page 10.

C Configuring event notification See page 13.

D Changing the configuration key See page 19.

E Changing activity logging settings See page 19.

F Changing registry settings See page 21.

G Changing advanced settings See page 23.

H Viewing statistics See page 24.

I Changing code page settings See page 24.

Viewing configuration settings

The following procedure describes how to view the Solaris Adapter configuration

settings.

1. At the Agent Main Configuration Menu, type A. The configuration settings for

the Solaris Adapter are displayed. The following screen is an example of the

Solaris Adapter configuration settings.

Configuration Settings

-------------------------------------------

Name : SolarisAgent

Version : 4.6

ADK Version : 4.65

ERM Version : 4.65

License : NONE

Asynchronous ADD Requests : TRUE (Max.Threads:3)

Asynchronous MOD Requests : TRUE (Max.Threads:3)

Asynchronous DEL Requests : TRUE (Max.Threads:3)

Asynchronous SEA Requests : TRUE (Max.Threads:3)

Available Protocols : DAML

Configured Protocols : DAML

Logging Enabled : TRUE

Logging Directory : /opt/tivoli/agents/SolarisAgent/Log

Log File Name : SolarisAgent.log

Max. log files : 3

Max.log file size (Mbytes) : 1

Debug Logging Enabled : TRUE

Detail Logging Enabled : FALSE

Press any key to continue

2. Press any key to return to the Main Menu.

Changing protocol configuration settings

The Solaris Adapter uses the DAML protocol to communicate with the Tivoli

Identity Manager Server. By default, when the adapter is installed, the DAML

protocol is configured to be used in nonsecure mode. In order to configure a secure

environment, you must configure the DAML protocol to use SSL and install a

certificate. Refer to “Installing the certificate” on page 38 for more information

about installing certificates.


In previous versions of this adapter, you could add and remove protocols.

However, in the latest version of this adapter, the DAML protocol is the only

supported protocol that you can use. Therefore, you will not need to add or

remove a protocol.

In order to configure the DAML protocol for the Solaris Adapter, complete the

following steps:

1. At the Agent Main Configuration Menu, type B. The DAML protocol is

configured and available by default for the Solaris Adapter.

Agent Protocol Configuration Menu

-----------------------------------

Available Protocols: DAML

Configured Protocols: DAML

A. Add Protocol.

B. Remove Protocol.

C. Configure Protocol.

X. Done

Select menu option

2. At the Agent Protocol Configuration Menu, type C. The DAML Protocol

Properties Menu is displayed.

3. At the DAML Protocol Properties Menu, type C. The protocol properties for the

configured protocol are displayed. The properties on your menu might be

different from the ones shown in the examples.

The following screen is an example of the DAML protocol properties:

DAML Protocol Properties

--------------------------------------------------------------------

A. USERNAME ****** ;Authorized user name.

B. PASSWORD ****** ;Authorized user password.

C. MAX_CONNECTIONS 100 ;Max Connections.

D. PORTNUMBER 45580 ;Protocol Server port number.

E. USE_SSL FALSE ;Use SSL secure connection.

F. SRV_NODENAME 9.38.215.20 ;Event Notif. Server name.

G. SRV_PORTNUMBER 9443 ;Event Notif. Server port number.

H. VALIDATE_CLIENT_CE FALSE ;Require client certificate.

I. REQUIRE_CERT_REG FALSE ;Require registered certificate.

X. Done

Select menu option:

4. Type the letter of the menu option for the protocol property that you want to

configure.

See Table 3 below for additional information about the properties that you can

configure for the DAML protocol.

Table 3. Options for the DAML protocol menu

Option Configuration task

A The following prompt is displayed:

Modify Property ’USERNAME’:

Type a user ID.

This value is the user ID that the Tivoli Identity Manager Server uses to

connect to the adapter.

The default user ID is agent.

Chapter 3. Configuring the Solaris adapter for IBM Tivoli Identity Manager 11

Table 3. Options for the DAML protocol menu (continued)


B The following prompt is displayed:

Modify Property ’PASSWORD’:

Type a password.

This value is the password for the user ID that the Tivoli Identity

Manager Server uses to connect to the adapter.

The default password is agent.

C The following prompt is displayed:

Modify Property ’MAX_CONNECTIONS’:

Enter the maximum number of concurrent open connections that the

adapter supports.

The default number is 100.

D The following prompt is displayed:

Modify Property ’PORTNUMBER’:

Type a different port number.

This value is the port number that the Tivoli Identity Manager Server

uses to connect to the adapter. The default port number is 45580.

E The following prompt is displayed:

Modify Property ’USE_SSL’:

Enter TRUE or FALSE to specify whether a secure SSL connection will

be used to connect to or from the adapter.

The default value is FALSE.

You must install a certificate when USE_SSL is set to TRUE. For more

information on certificate installation, see “Installing the certificate” on

page 38.

F The following prompt is displayed:

Modify Property ’SRV_NODENAME’:

Type a server name or an IP address, for example, 9.38.215.20.

This value is the DNS name or IP address of the Tivoli Identity Manager

Server that is used for event notification and asynchronous request

processing.

Note: If your platform supports Internet Protocol version 6 (IPv6)

connections, you can specify an IPv6 server.

G The following prompt is displayed:

Modify Property ’SRV_PORTNUMBER’:

Type a different port number to access the Tivoli Identity Manager

Server.

This value is the port number that the adapter uses to connect to the

Tivoli Identity Manager Server. The default port number is 9443.


Table 3. Options for the DAML protocol menu (continued)


H The following prompt is displayed:

Modify Property ’VALIDATE_CLIENT_CE’:

Type TRUE to require the Tivoli Identity Manager Server to send a

certificate when it communicates with the adapter.

Type FALSE to allow the Tivoli Identity Manager Server to communicate

with the adapter without a certificate. The default value is FALSE.

Notes:

1. If you set this option to TRUE, you must configure options D

through H.

2. The property name is actually VALIDATE_CLIENT_CERT. It is

truncated by agentCfg to fit onto the screen.

3. You must use CertTool to install the appropriate CA certificates and

optionally register the Tivoli Identity Manager Server certificate. For

more information on using CertTool, see “Managing SSL certificates

using CertTool” on page 35.

I The following prompt is displayed:

Modify Property ’REQUIRE_CERT_REG’:

This value only applies when option H is set to TRUE.

Type TRUE to require the client certificate from the Tivoli Identity

Manager Server to be registered with the adapter before it will accept an

SSL connection.

Type FALSE to require the client certificate only be verified against the

list of CA certificates. The default value is FALSE.

For more information on certificates, see Chapter 4, “Configuring SSL

authentication for the Solaris adapter,” on page 29.

5. At the prompt, change the value, and press Enter.

The Protocol Properties Menu is displayed with your new settings.

If you do not want to change the value, just press Enter to return to the

Protocol Properties Menu.

6. Repeat steps 4 and 5 to configure as many protocol properties as you need to.

7. At the Protocol Properties Menu, type X to exit the menu.

Configuring event notification

Event notification is a feature of the Solaris Adapter that updates the Tivoli

Identity Manager Server at set intervals. Event notification detects changes that are

made on the managed resource and updates the Tivoli Identity Manager Server

with the changes. You can enable event notification if you want to have updated

information from the managed resource sent back to the Tivoli Identity Manager

Server between full reconciliations. Event notification is not intended to replace

reconciliations on the Tivoli Identity Manager Server.

When event notification is enabled, a database of the reconciliation data is kept on

the machine where the adapter is installed. The database is updated with the

changes that are requested by the Tivoli Identity Manager Server and will remain

synchronized with the server. You can specify an interval for the event notification


process to compare the database to data that currently exists on the managed

resource. When the interval has elapsed, any differences between the managed

resource and the database are forwarded to the Tivoli Identity Manager Server and

updated in the local snapshot database.

There are several steps to enabling event notification. These steps assume that the

adapter is communicating successfully with the managed resource and the Tivoli

Identity Manager Server.

First, you must configure the host name, port number, and login information for

the Tivoli Identity Manager Server. In order to identify the server for the DAML

protocol to use, complete the following steps:

1. At the Agent Protocol Configuration Menu, select Configure Protocol. For more

information on configuring a protocol, see “Changing protocol configuration

settings” on page 10.

2. Type the menu option for the SRV_NODENAME property.

3. Specify the IP address or server name that identifies the Tivoli Identity

Manager Server, and press Enter.


4. Type the menu option for the SRV_PORTNUMBER property.

5. Specify the port number that the adapter uses to connect to the Tivoli Identity

Manager Server for event notification and press Enter.


The example menu shows all of the options displayed when Event Notification is

enabled. If Event Notification is disabled, not all of the options are displayed. In

order to set Event Notification for the Tivoli Identity Manager Server, complete the

following steps:

1. At the Agent Main Configuration Menu, type C. The Event Notification Menu is

displayed.

Event Notification Menu

--------------------------------------------------------------

* Reconciliation interval : 1 day(s)

* Next Reconciliation time : 23 hour(s) 56 min(s). 23 sec(s).

* Configured Contexts : Jupiter, dd309

A. Enabled

B. Time interval between reconciliations.

C. Set Processing cache size. (currently: 50 Mbytes)

D. Start event notification now.

E. Set attributes to be reconciled.

F. Reconciliation process priority. (current: 1)

G. Add Event Notification Context.

H. Modify Event Notification Context.

I. Remove Event Notification Context.

J. List Event Notification Contexts.

X. Done

Select menu option:

Note: This menu shows all of the options that are displayed when Event

Notification is enabled. If Event Notification is disabled, all of the

options will not be displayed.

2. Type the letter of the menu option that you want to change.

Option A must be enabled in order for the values of the other options to take

effect.


Press Enter to return to the Agent Event Notification Menu without changing

the value.

Table 4. Options for the event notification menu


A If this option is enabled, the adapter updates the Tivoli Identity Manager

Server with changes to the adapter at regular intervals.

When the option is set to:

v Disabled, pressing the A key changes to enabled

v Enabled, pressing the A key changes to disabled

Type A to toggle between the options.


Enter new interval

([ww:dd:hh:mm:ss])

Type a different reconciliation interval. For example,

[00:01:00:00:00]

Note: This value is the interval to wait once event notification completes

before it is run again. The event notification process is resource

intensive, therefore this value must not be set to run too frequently.


Enter new cache size[5]:

Type a different value to change the processing cache size.

D If this option is selected, event notification is started.

E The Event Notification Entry Types Menu is displayed. See “Setting

event notification triggers” on page 16 for more information.

F The following prompt is displayed:

Enter new thread priority [1-10]:

Type a different thread value to change the event notification process

priority.

Note: Setting the thread priority to a lower value reduces the impact

that the event notification process has on the performance of the adapter.

A lower value might also cause event notification to take longer.

G The following prompt is displayed:

Context name:

Type the new context name, and press Enter. The new context is added.

H A menu listing the available contexts is displayed. See “Modifying an

event notification context” on page 17 for more information.

I The Remove Context Menu is displayed. Select the context to remove.

The following prompt is then displayed:

Delete context context1? [no]:

Press Enter to exit without deleting the context, or type Yes and press

Enter to delete the context.


Table 4. Options for the event notification menu (continued)


J The Event Notification Contexts are displayed in the following format:

Context Name : Context1

Target DN :

erservicename=context1,o=IBM,

ou=IBM,dc=com

--- Attributes for search request ---

{search attributes listed}

-----------------------------------------------

3. If you changed the value for options B, C, E, or F, press Enter. The other

options are automatically changed when you type the corresponding letter of

the menu option.

The Event Notification Menu is displayed with your new settings.

Setting event notification triggers

By default, all attributes are queried for value changes. Certain attributes that

change frequently (for example, password age or last successful logon) must be

omitted.

1. At the Event Notification Menu, type E. The Event Notification Entry Types

Menu is displayed.

Event Notification Entry Types

-------------------------------------------

A. USER

B. GROUP

X. Done

Select menu option:

The USER and GROUP types will not appear in the above menu until the

following conditions have been met:

a. Event notification has been enabled

b. A context has been created and configured

c. A full reconciliation has been run2. Type A for a list of the attributes returned during a user reconciliation, or type B

for attributes returned during a group reconciliation.

The Event Notification Attribute Listing for the selected reconciliation type is

displayed. The default setting lists all attributes that the adapter supports. The

example below lists example attributes, and might differ from the list that is

displayed on your machine.

Event Notification Attribute Listing

-------------------------------------

(a) **erSolarisGroupId (b) **erSolarisGroupMember (c) **erSolarisGroupName

(d) **erSolarisAT (e) **erSolarisCRON (f) **erUnixDuplicateUID

(g) **erExpirationDate (h) **erPasswordForceChange (i) **erHomeDirPermissions

(j) **erHomeDir (k) **erAccountIdleDays (l) **erLastAccessDate

(m) **erPassword (n) **erUnixPrimaryGroup (o) **erPasswordLastChange

(p) **erPasswordMaxAge (q) **erSolarisPwdMaxExpire (r) **erSolarisPwdMaxRepeats

(p)rev page 1 of 3 (n)ext

-----------------------------

X. Done

Select menu option:


3. Type the corresponding letter of the menu option for the attribute to exclude

from an event notification.

Attributes that are marked with two asterisks (**) are returned during the event

notification. Attributes that are not marked with asterisks are not returned

during the event notification.

Modifying an event notification context

An event notification context corresponds to a service on the Tivoli Identity

Manager Server. Some adapters support multiple services. One Solaris Adapter can

have several Tivoli Identity Manager services, by specifying a different base point

for each service.

The base point for the Solaris Adapter is the point in the directory server that is

used as the root for the adapter. This point can be an organizational unit (OU) or

domain container (DC) base point. Because the base point is an optional value, if a

value is not specified, the adapter uses the default domain of the machine on

which it is installed.

You can have multiple event notification contexts, but you must have at least one

adapter. In the example screen below, note that Context1, Context2, and Context3

are three different contexts, all having a different base point.

In order to modify an event notification context, complete the following steps:

1. At the Event Notification Menu, type H. The Modify Context Menu is

displayed.

Modify Context Menu

------------------------------

A. Context1

B. Context2

C. Context3

X. Done

Select menu option:

2. Type the letter of the menu option that you want to modify. The Modify

Context Menu for the selected context is displayed.

A. Set attributes for search

B. Target DN:

C. Delete Baseline Database

X. Done

Select menu option:

Table 5. Options for the modify context menu


A Adding search attributes for event notification See page 17.

B Configuring the target DN for event notification

contexts

See page 18.

C Removing the baseline database for event

notification contexts

See page 19.

Adding search attributes for event notification

For some adapters, you might need to specify an attribute-value pair for one or

more contexts. These attribute-value pairs, which are defined by completing the

steps below, serve multiple purposes:


v When multiple services are supported by a single adapter, each service needs to

specify one or more attributes to differentiate it from the other services.

v The search attributes are passed to the event notification process, once the event

notification interval has occurred or is started manually. For each context, a full

search request is sent to the adapter. Additionally, the attributes specified for

that context are passed to the adapter.

v When the Tivoli Identity Manager Server initiates a reconciliation process, the

adapter replaces the local database that represents this service with the new

database.

In order to add search attributes, complete the following steps:

1. At the Modify Context Menu for the context, type A. The Reconciliation

Attribute Passed to Agent Menu is displayed.

Reconciliation Attributes Passed to Agent for Context: Context1

----------------------------------------------------

----------------------------------------------------

A. Add new attribute

B. Modify attribute value

C. Remove attribute

X. Done

Select menu option:

The Solaris Adapter does not have any attributes that need to be specified for

Event Notification.

2. Type the letter of the menu option that you want to change.

The supported attribute names will be displayed with two asterisks (**) in front

of each name. When you type the letter of an attribute, it will toggle the

asterisks on and off. Attributes without asterisks will not be updated during an

event notification.

The Reconciliation Attributes Passed to Agent Menu is displayed with the

changes displayed.

Configuring the target DN for event notification contexts

The target DN field holds the unique name of the service that receives event

notification updates.

In order to configure the target DN, complete the following steps:

1. At the Modify Context Menu for the context, type B.

2. At the Enter Target DN prompt, type the target DN for the context, and press

Enter. The target DN for the event notification context must be in the following

format:

erservicename=erservicename,o=organizationname,ou=tenantname,rootsuffix

Each element of the DN is defined as follows:

Table 6. DN elements and definitions

Element Definition

erservicename Specifies the name of the target service

o Specifies the name of the organization

ou Specifies the name of the tenant in which

the organization is in

rootsuffix Specifies the root of the directory tree


The Modify Context Menu is displayed with the new target DN listed.

Removing the baseline database for event notification contexts

This option is only available once a context is created and a reconciliation is run on

the context to create a Baseline Database file.

At the Modify Context Menu for the context, type C. The Modify Context Menu is

displayed with the Delete Baseline Database option removed.

Changing the configuration key

You use the configuration key as a password to access the configuration tool for

the adapter.

In order to change the Solaris Adapter configuration key, complete the following

steps:

1. At the Main Menu prompt, type D.

2. Change the value of the configuration key, and press Enter.

Press Enter to return to the Main Configuration Menu without changing the

configuration key. The default configuration key is agent. Make sure that you

choose passwords that cannot be easily guessed.

The following message is displayed:

Configuration key successfully changed.

The configuration program exits, and the Main Menu prompt is displayed.

Changing activity logging settings

When you enable logging, Solaris Adapter maintains a dated log file of all

transactions, SolarisAgent.log. By default, the log file is in the \log directory.

In order to change the Solaris Adapter activity logging settings, complete the

following steps:

1. At the Main Menu prompt, type E.

The Agent Activity Logging Menu is displayed. The following example shows

the default activity logging settings.

Agent Activity Logging Menu

-------------------------------------

A. Activity Logging (Enabled).

B. Logging Directory (current: /opt/tivoli/agents/SolarisAgent/Log).

C. Activity Log File Name (current: SolarisAgent.log).

D. Activity Logging Max. File Size ( 1 mbytes)

E. Activity Logging Max. Files ( 3 )

F. Debug Logging (Enabled).

G. Detail Logging (Disabled).

H. Base Logging (Disabled).

I. Thread Logging (Disabled).

X. Done

Select menu option:

2. Type the letter of the Activity Logging Menu option that you want to change.

Option A must be enabled in order for the values of the other options to take

effect.

Press Enter to return to the Agent Activity Logging Menu without changing the

value.


Table 7. Options for the activity logging menu


A Set this option to enabled to have the adapter maintain a dated log file

of all transactions.


v Disabled, pressing the A key changes to enabled

v Enabled, pressing the A key changes to disabled

Type A to toggle between the options.


Enter log file directory:

Type a different value for the logging directory, for example, /home/Log.

When the logging option is enabled, details about each access request

are stored in the logging file that is in this directory.


Enter log file name:

Type a different value for the log file name. When the logging option is

enabled, details about each access request are stored in the logging file.

D The following prompt is displayed:

Enter maximum size of log files (mbytes):

Type a new value, for example, 10. The oldest data is archived when the

log file reaches the maximum file size. File size is measured in

megabytes. It is possible for the activity log file size to exceed disk

capacity.

E The following prompt is displayed:

Enter maximum number of log files to retain:

Type a new value up to 100, for example, 5. The adapter automatically

deletes the oldest activity logs beyond the specified limit.

F If this option is set to enabled, the adapter includes the debug

statements in the log file of all transactions.


v Disabled, pressing the F key changes the value to enabled

v Enabled, pressing the F key changes the value to disabled

Type F to toggle between the options.

G If this option is set to enabled, the adapter maintains a detailed log file

of all transactions. The detail logging option must be used for diagnostic

purposes only. Detailed logging enables more messages from the adapter

and might increase the size of the logs.


v Disabled, pressing the G key changes the value to enabled

v Enabled, pressing the G key changes the value to disabled

Type G to toggle between the options.


Table 7. Options for the activity logging menu (continued)


H If this option is set to enabled, the adapter maintains a log file of all

transactions in the Adapter Development Kit (ADK) and library files.

Base logging will substantially increase the size of the logs.


v Disabled, pressing the H key changes the value to enabled

v Enabled, pressing the H key changes the value to disabled

Type H to toggle between the options.

I If this option is enabled, the log file will contain thread IDs, in addition

to a date and timestamp on every line of the file.


v Disabled, pressing the I key changes the value to enabled

v Enabled, pressing the I key changes the value to disabled

Type I to toggle between the options.

3. Press Enter if you changed the value for option B, C, D, or E. The other options

are changed automatically when you type the corresponding letter of the menu

option.

The Agent Activity Logging Menu is displayed with your new settings.

Changing registry settings

In order to change the Solaris Adapter registry settings, complete the following

steps:

1. At the Main Menu, type F. The Registry Menu is displayed.

SolarisAgent 4.6 Agent Registry Menu

-------------------------------------------

A. Modify Non-encrypted registry settings.

B. Modify encrypted registry settings.

C. Multi-instance settings.

X. Done

Select menu option:

2. See the following procedures on modifying registry settings.

Note: There are no encrypted registry settings for this adapter.

Modifying non-encrypted registry settings

In order to modify the non-encrypted registry settings, complete the following

steps:

1. At the Agent Registry Menu, type A. The Non-encrypted Registry Settings

Menu is displayed.


Agent Registry Items

---------------------------

01. ENROLE_VERSION ’4.0’

02. deleteHomeDir ’true’

03. SetupHomeDir ’/opt/tivoli/agents/SolarisAgent’

04. UseShadowFile ’true’

05. processatCron ’true’

06. processPath ’false’

07. processUmask ’true’

08. ISTAMOSInstalled ’false’

09. NISShadowFile ’true’

--------------------------------

Page 1 of 1

A. Add new attribute

B. Modify attribute value

C. Remove attribute

X. Done

Select menu option:

2. Type the letter of the menu option for the action that you want to perform on

an attribute.

Table 8. Attribute configuration option descriptions


A Add new attribute

B Modify attribute value

C Remove attribute

3. Type the registry item name, and press Enter.

See Table 9 for a description of each registry key.

4. If you selected option A or B, type the registry item value and press Enter.

The non-encrypted registry settings menu reappears and displays your new

setting(s).

Table 9 describes the registry keys and their available settings:

Table 9. Registry key descriptions

Key Description

deleteHomeDir Specifies the flag that indicates whether to

use delete_user to delete the home directory.

The default value is TRUE.

SetupHomeDir Specifies the setup directory of the adapter.

You must set this value during the

installation of the adapter.

UseShadowFile Specifies the flag that indicates whether to

use the shadow file. The default value is

TRUE.

processatCron Specifies the flag that indicates whether to

process the following files:

v cron_allowed

v cron_deny

v at_allowed

v at_deny



Table 9. Registry key descriptions (continued)

Key Description

processPath Specifies the flag that indicates whether to

process the user search path attribute. The

default value is FALSE.

processUmask Specifies the flag that indicates whether to

process the user UMASK. The default value

is TRUE.

ISTAMOSInstalled Specifies the flag that indicates whether to

enable or disable PAM module. The default

value is FALSE.

NISShadowFile Specifies the flag that indicates whether to

use the shadow file. The default value is

TRUE.

Changing advanced settings

You can change the Solaris Adapter thread count settings for the following types of

requests:

v System Login Add

v System Login Change

v System Login Delete

v Reconciliation

These settings determine the maximum number of requests that the Solaris

Adapter processes concurrently. In order to change these settings, complete the

following steps:

1. At the Main Menu prompt, type G.

The Advanced Settings Menu is displayed. The following example shows the

default thread count settings.

SolarisAgent 4.6 Advanced Settings Menu

-------------------------------------------

A. Single Thread Agent (current:TRUE)

B. ADD max. thread count. (current:3)

C. MODIFY max. thread count. (current:3)

D. DELETE max. thread count. (current:3)

E. SEARCH max. thread count. (current:3)

F. Allow User EXEC procedures (current:FALSE)

G. Archive Request Packets (current:FALSE)

H. UTF8 Conversion support (current:TRUE)

I. Pass search filter to agent (current:FALSE)

J. Thread Priority Level (1-10) (current:4)

X. Done

Select menu option:

2. Type the letter of the menu option of the advanced setting that you want to

change. For a description of each option, see Table 10.

Table 10. Options for the advanced settings menu

Option Description

A Forces the adapter to allow only one request at a time.



Table 10. Options for the advanced settings menu (continued)

Option Description

B Controls how many simultaneous ADD requests can run at one time.

The default value is 3.

C Controls how many simultaneous MODIFY requests can run at one time.


D Controls how many simultaneous DELETE requests can run at one time.


E Controls how many simultaneous SEARCH requests can run at one time.


F Determines whether the adapter allows pre- and post-exec functions.

Enabling this option is a potential security risk.

The default value is FALSE.

G This option is no longer supported.

H This option is no longer supported.

I Currently, this adapter does not support processing filters directly. This

option must always be FALSE.

J Sets the thread priority level for the adapter.


3. Change the value, and press Enter.

The Advanced Settings Menu is displayed with your new settings.

Viewing statistics

In order to view an event log for the Solaris Adapter, complete the following steps:

1. At the Main Menu prompt, type H.

The activity history for the adapter is displayed.

SolarisAgent 4.6 Agent Request Statistics

--------------------------------------------------------------------

Date Add Mod Del Ssp Res Rec

-----------------------------------------------------------------

11/15/02 000001 000000 000000 000000 000000 000001

-----------------------------------------------------------------

X. Done

2. Type X to return to the Main Configuration Menu.

Changing code page settings

In order to list the supported code page information for the Solaris Adapter, the

adapter must be running. Run the following command to view the code page

information:

agentCfg -agent [adapter_name] -codepages


In order to change the code page settings for the Solaris Adapter, complete the

following steps:

1. At the Main Menu prompt, type I.

The Code Page Support Menu for the adapter is displayed.

SolarisAgent 4.6 Codepage Support Menu

-------------------------------------------

* Configured codepage: US-ASCII

-------------------------------------------

*

*******************************************

* Restart Agent After Configuring Codepages

*******************************************

A. Codepage Configure.

X. Done

Select menu option:

2. Type A to configure a code page.

Note: The SolarisAgent code page uses unicode, therefore this option is not

applicable.

3. Type X to return to the Main Configuration Menu.

Accessing help and additional options

In order to access the agentCfg help menu and use the help arguments, complete

the following steps:

1. At the Main Menu prompt, type X. The command prompt is displayed, and

you are in the \bin directory.

2. Type agentCfg -help at the prompt to view the help menu.

The following list of possible commands is displayed:

-version ; Show version

-hostname < value> ; Target nodename to connect to (Default:Local host IP address)

-findall ; Find all agents on target node

-list ; List available agents on target node

-agent <value> ; Name of agent

-tail ; Display agent’s activity log

-schema ; Display agent’s attribute schema

-portnumber <value>; Specified agent’s TCP/IP port number

-netsearch <value> ; Lookup agents hosted on specified subnet

-confidencetest ; Confidence test

-setup ; Confidence test setup

-help ; Display this help screen

Table 11 describes each argument.

Table 11. Arguments and descriptions for the agentCfg help command

Argument Description

-version Use this argument to display the version of the agentCfg tool.


Table 11. Arguments and descriptions for the agentCfg help command (continued)

Argument Description

-hostname <value> Use the -hostname argument with any of the following

arguments to specify a different host:

v -findall

v -list

v -tail

v -agent

Enter a host name or IP address as the value.

-findall Use this argument to search and display all port addresses

between 44970 and 44994 and their assigned adapter names.

This option will timeout on unused port numbers, so it might

take several minutes to complete.

Add the -hostname argument to search a remote host.

-list Use this argument to display the adapters that are installed

on the local host of the Solaris Adapter. By default, the first

time you install an adapter, it is either assigned to port

address 44970 or to the next available port number. All

subsequently installed adapters are then assigned to the next

available port address. Once an unused port is found, the

listing stops.

Use the -hostname argument to search a remote host.

-agent <value> Use this argument to specify the adapter that you want to

configure. Enter an adapter name as the value. Use this

argument with the -hostname argument to modify the

configuration setting from a remote host. You can also use

this argument with the -tail argument.

-tail Use this argument with the -agent argument to display the

activity log for an adapter. Add the -hostname argument to

display the log file for an adapter on a different host.

-schema This option is no longer supported.

-portnumber <value> Use this argument with the -agent argument to specify the

port number that is used for connections for the agentCfg

tool.

-netsearch <value> Use this argument with the -findall argument to display all

active adapters on the system. You must specify a subnet

address as the value.

-confidencetest Use this argument to run a test to add, modify, search, and

delete a request to the adapter. The confidence test allows

you to test the connection between the adapter and the

Solaris Server. This allows you to verify that the adapter can

connect to Solaris Server without the Tivoli Identity Manager

Server.

-setup Use this argument, along with the −confidence argument, to

configure the confidence test.

-help Use this argument to display the Help information for the

agentCfg command.

3. Type agentCfg and one or more of the supported arguments at the prompt.

You must type agentCfg before every argument to run the adapter

configuration tool.


Type agentCfg -list to list all of the adapters on the local host IP address.

Note that the port address for the Tivoli Identity Manager Server is 44970. The

output is similar to the following output:

Agent(s) installed on node ’127.0.0.1’

-----------------------

SolarisAgent (44970)

Type agentCfg -agent SolarisAgent to display the Main Menu of the agentCfg

tool, which is used to view or modify the Solaris Adapter parameters.

Type agentCfg -list -hostname 192.9.200.7 to list the adapters on a host

whose IP address is 192.9.200.7. The output is similar to the following output:

Agent(s) installed on node ’192.9.200.7’

------------------

SolarisAgent (44970)

Type agentCfg -agent SolarisAgent -hostname 192.9.200.7 to display the

Main Menu of the agentCfg tool for a host whose IP address is 192.9.200.7. Use

the menu options to view or modify the Solaris Adapter parameters.


Chapter 4. Configuring SSL authentication for the Solaris

adapter

In order to establish a secure connection between a Tivoli Identity Manager

adapter and the Tivoli Identity Manager Server, you must configure the adapter

and the server to use the Secure Sockets Layer (SSL) authentication with the

default communication protocol, DAML. By configuring the adapter for SSL, you

ensure that the Tivoli Identity Manager Server verifies the identity of the adapter

before a secure connection is established.

You can configure SSL authentication for connections that originate from the Tivoli

Identity Manager Server or from the adapter. Typically, the Tivoli Identity Manager

Server initiates a connection to the adapter in order to set or retrieve the value of a

managed attribute on the adapter. However, depending on the security

requirements of your environment, you might need to configure SSL authentication

for connections that originate from the adapter. For example, if the adapter uses

events to notify the Tivoli Identity Manager Server of changes to attributes on the

adapter, you can configure SSL authentication for Web connections that originate

from the adapter to the Web server used by the Tivoli Identity Manager Server.

In a production environment, you need to enable SSL security; however, for testing

purposes you might want to disable SSL. If an external application that

communicates with the adapter (such as the Tivoli Identity Manager Server) is set

to use server authentication, you must enable SSL on the adapter to verify the

certificate that the application presents.

This chapter presents an overview of SSL authentication, certificates, and how to

enable SSL authentication using the CertTool utility.

Overview of SSL and digital certificates

When you deploy Tivoli Identity Manager in an enterprise network, you must

secure communication between the Tivoli Identity Manager Server and the

software products and components with which the server communicates. The

industry-standard SSL protocol, which uses signed digital certificates from a

certificate authority (CA) for authentication, is used to secure communication in a

Tivoli Identity Manager deployment. Additionally, SSL provides encryption of the

data exchanged between the applications. Encryption makes data transmitted over

the network intelligible only to the intended recipient.

Signed digital certificates enable two applications connecting in a network to

authenticate each other’s identity. An application acting as an SSL server presents

its credentials in a signed digital certificate to verify to an SSL client that it is the

entity it claims to be. An application acting as an SSL server can also be configured

to require the application acting as an SSL client to present its credentials in a

certificate, thereby completing a two-way exchange of certificates. Signed

certificates are issued by a third-party certificate authority for a fee. Some utilities,

such as those provided by OpenSSL, can also issue signed certificates.

A certificate-authority certificate (CA certificate) must be installed to verify the

origin of a signed digital certificate. When an application receives another

application’s signed certificate, it uses a CA certificate to verify the originator of


the certificate. A certificate authority can be well-known and widely used by other

organizations, or it can be local to a specific region or company. Many applications,

such as Web browsers, are configured with the CA certificates of well−known

certificate authorities to eliminate or reduce the task of distributing CA certificates

throughout the security zones in a network.

Private keys, public keys, and digital certificates

Keys, digital certificates, and trusted certificate authorities are used to establish and

verify the identities of applications.

SSL uses public key encryption technology for authentication. In public key

encryption, a public key and a private key are generated for an application. Data

encrypted with the public key can only be decrypted using the corresponding

private key. Similarly, the data encrypted with the private key can only be

decrypted using the corresponding public key. The private key is

password-protected in a key database file so that only the owner can access the

private key to decrypt messages that are encrypted using the corresponding public

key.

A signed digital certificate is an industry-standard method of verifying the

authenticity of an entity, such as a server, client, or application. In order to ensure

maximum security, a certificate is issued by a third-party certificate authority. A

certificate contains the following information to verify the identity of an entity:

Organizational information

This section of the certificate contains information that uniquely identifies

the owner of the certificate, such as organizational name and address. You

supply this information when you generate a certificate using a certificate

management utility.

Public key

The receiver of the certificate uses the public key to decipher encrypted

text sent by the certificate owner to verify its identity. A public key has a

corresponding private key that encrypts the text.

Certificate authority’s distinguished name

The issuer of the certificate identifies itself with this information.

Digital signature

The issuer of the certificate signs it with a digital signature to verify its

authenticity. This signature is compared to the signature on the

corresponding CA certificate to verify that the certificate originated from a

trusted certificate authority.

Web browsers, servers, and other SSL-enabled applications generally accept as

genuine any digital certificate that is signed by a trusted certificate authority and is

otherwise valid. For example, a digital certificate can be invalidated because it has

expired or the CA certificate used to verify it has expired, or because the

distinguished name in the digital certificate of the server does not match the

distinguished name specified by the client.

Self-signed certificates

You can use self-signed certificates to test an SSL configuration before you create

and install a signed certificate issued by a certificate authority. A self-signed

certificate contains a public key, information about the owner of the certificate, and

the owner’s signature. It has an associated private key, but it does not verify the

origin of the certificate through a third-party certificate authority. Once you


generate a self-signed certificate on an SSL server application, you must extract it

and add it to the certificate registry of the SSL client application.

This procedure is the equivalent of installing a CA certificate that corresponds to a

server certificate. However, you do not include the private key in the file when

you extract a self-signed certificate to use as the equivalent of a CA certificate.

Use a key management utility to generate a self-signed certificate and a private

key, to extract a self-signed certificate, and to add a self-signed certificate.

Where and how you choose to use self-signed certificates depends on your security

requirements. In order to achieve the highest level of authentication between

critical software components, do not use self-signed certificates, or use them

selectively. For example, you can choose to authenticate applications that protect

server data with signed digital certificates, and use self-signed certificates to

authenticate Web browsers or Tivoli Identity Manager adapters.

If you are using self-signed certificates, in the following procedures you can

substitute a self-signed certificate for a certificate and CA certificate pair.

Certificate and key formats

Certificates and keys are stored in files with the following formats:

.pem format

A privacy-enhanced mail (.pem ) format file begins and ends with the

following lines:

-----BEGIN CERTIFICATE-----

-----END CERTIFICATE-----

A .pem file format supports multiple digital certificates, including a

certificate chain. If your organization uses certificate chaining, use this

format to create CA certificates.

.arm format

An .arm file contains a base-64 encoded ASCII representation of a

certificate, including its public key, but not its private key. An .arm file

format is generated and used by the IBM Key Management utility.

.der format

A .der file contains binary data. A .der file can only be used for a single

certificate, unlike a .pem file, which can contain multiple certificates.

.pfx format (PKCS12)

A PKCS12 file is a portable file that contains a certificate and a

corresponding private key. This format is useful for converting from one

type of SSL implementation to a different implementation. For example,

you can create and export a PKCS12 file using the IBM Key Management

utility, then import the file to another machine using the CertTool utility.

The use of SSL authentication

When you start the adapter, the available connection protocols are loaded. The

DAML protocol is the only available protocol that supports the use of SSL

authentication. You can specify to use the DAML SSL implementation.

The DAML SSL implementation uses a certificate registry to store private keys and

certificates. The location of the certificate registry is managed internally by the

Chapter 4. Configuring SSL authentication for the Solaris adapter 31

CertTool key and certificate management tool; therefore, you do not specify the

location of the registry when you perform certificate management tasks.

For more information on the DAML protocol, see “Changing protocol

configuration settings” on page 10.

Configuring certificates for SSL authentication

Use the following procedures to configure the adapter for one-way or two-way SSL

authentication using signed certificates. In order to perform these procedures, use

the CertTool utility.

Configuring certificates for one-way SSL authentication

In this scenario, the Tivoli Identity Manager Server and the Tivoli Identity Manager

adapter are set to use SSL. Client authentication is not set on either application.

The Tivoli Identity Manager Server operates as the SSL client and initiates the

connection. The adapter operates as the SSL server and responds by sending its

signed certificate to the Tivoli Identity Manager Server. The Tivoli Identity

Manager Server uses the CA certificate that is installed to validate the certificate

sent by the adapter.

In Figure 2, Application A operates as the Tivoli Identity Manager Server, and

Application B operates as the Tivoli Identity Manager adapter.

In order to configure one-way SSL, perform the following tasks for each

application:

1. On the adapter, complete these steps:

a. Start the CertTool utility.

b. In order to configure the SSL-server application with a signed certificate

issued by a certificate authority:

1) Create a certificate signing request (CSR) and private key. This step

creates the certificate with an embedded public key and a separate

private key and places the private key in the PENDING_KEY registry

value.

2) Submit the CSR to the certificate authority using the instructions

supplied by the CA. When you submit the CSR, specify that you want

the root CA certificate returned with the server certificate.2. On the Tivoli Identity Manager Server, complete one of these steps:

Hello

Tivoli Identity ManagerServer (SSL client)

KeystoreCA

CertificateA

1

Send Certificate B

Tivoli Identity Manageradapter (SSL server)C

CertificateA

Verify

Figure 2. One-way SSL authentication (server authentication)


v If you are configuring the use of a signed certificate issued by a well-known

CA, ensure that the Tivoli Identity Manager Server has stored the root

certificate of the CA (CA certificate) in its keystore. If the keystore does not

contain the CA certificate, extract the CA certificate from the adapter and add

it to the keystore of the server.

v If you are configuring the use of self-signed certificates:

– If you generated the self-signed certificate on the Tivoli Identity Manager

Server, the certificate is already installed in its keystore.

– If you generated the self-signed certificate using the key management

utility of another application, extract the certificate from that application’s

keystore and add it to the keystore of the Tivoli Identity Manager Server.

Configuring certificates for two-way SSL authentication

In this scenario, the Tivoli Identity Manager Server and the Tivoli Identity Manager

adapter are set to use SSL and the adapter is set to use client authentication. Once

sending its certificate to the Tivoli Identity Manager Server, the adapter requests

identity verification from the server, which sends its signed certificate to the

adapter. Both applications are configured with signed certificates and

corresponding CA certificates.

In Figure 3, the Tivoli Identity Manager Server operates as Application A, and the

Tivoli Identity Manager adapter operates as Application B.

The following procedure assumes that you have already configured the adapter

and Tivoli Identity Manager Server for one-way SSL authentication using the

procedure described in “Configuring certificates for one-way SSL authentication”

on page 32. Therefore, if you are using signed certificates from a CA:

v The adapter is configured with a private key and a signed certificate that was

issued by a CA.

v The Tivoli Identity Manager Server is configured with the CA certificate of the

CA that issued the signed certificate of the adapter.

In order to complete the certificate configuration for two-way SSL, perform the

following tasks:

CHello

KeystoreCA

CertificateA

CertificateB

CertificateA

CACertificate

B

Send Certificate A

Tivoli Identity Manageradapter (SSL server) C

Tivoli Identity ManagerServer (SSL client)

Send Certificate AVerify

Verify

Send Certificate B

Figure 3. Two-way SSL authentication (client authentication)


1. On the Tivoli Identity Manager Server, create a CSR and private key, obtain a

certificate from a CA, install the CA certificate, install the newly signed

certificate, and extract the CA certificate to a temporary file.

2. On the adapter, add the CA certificate that was extracted from the keystore of

the Tivoli Identity Manager Server to the adapter.

When you have finished the two-way certificate configuration, each application has

its own certificate and private key and the CA certificate of the CA that issued the

certificates for each application.

Configuring certificates when the adapter operates as an SSL

client

In this scenario, the adapter operates as an SSL client in addition to operating as

an SSL server. This scenario applies if the adapter initiates a connection to the Web

server (used by the Tivoli Identity Manager Server) to send an event notification.

For example, the adapter initiates the connection and the Web server responds by

presenting its certificate to the adapter.

Figure 4 illustrates how a Tivoli Identity Manager adapter operates as an SSL sever

and an SSL client. When communicating with the Tivoli Identity Manager Server,

the adapter sends its certificate for authentication. When communicating with the

Web server, the adapter receives the certificate of the Web server.

If the Web Server is configured for two-way SSL authentication, it verifies the

identity of the adapter, which sends its signed certificate to the Web server (not

shown in the illustration). In order to enable two-way SSL authentication between

the adapter and Web server, use the following procedure:

1. Configure the Web server to use client authentication.

2. Follow the procedure for creating and installing a signed certificate on the Web

server.

3. Install the CA certificate on the adapter using the CertTool utility.

4. Add the CA certificate corresponding to the signed certificate of the adapter to

the Web server.

TivoliIdentityManagerAdapter

TivoliIdentityManagerServer

CA Certificate ACertificate ACA Certificate C

Certificate C

Web server

A B

C

Hello

Certificate A

Hello

Certificate C

Figure 4. Tivoli Identity Manager adapter operating as an SSL server and an SSL client


For more information on configuring certificates when the adapter initiates a

connection to the Web server (used by the Tivoli Identity Manager Server) to send

an event notification, see the Tivoli Identity Manager Information Center.

Managing SSL certificates using CertTool

The procedures in this section describe how to use the CertTool utility to manage

private keys and certificates.

This section includes instructions for performing the following tasks:

v “Starting CertTool.”

v “Generating a private key and certificate request” on page 37.

v “Installing the certificate” on page 38.

v “Installing the certificate and key from a PKCS12 file” on page 38.

v “Viewing the installed certificate” on page 39.

v “Viewing CA certificates” on page 39.

v “Installing a CA certificate” on page 39.

v “Deleting a CA certificate” on page 39.

v “Viewing registered certificates” on page 40.

v “Registering a certificate” on page 40.

v “Unregistering a certificate” on page 40.

Starting CertTool

In order to start the certificate configuration tool, CertTool, for the Solaris Adapter,

complete these steps:

1. Log into the Solaris Adapter.

2. Change to the bin directory for the adapter. For example, if the Solaris Adapter

directory is in the default location, type the following command:

# cd /opt/tivoli/agents/SolarisAgent/bin

3. Type CertTool -agent SolarisAgent at the prompt. The Main Menu is

displayed:

Main menu - Configuring agent: SolarisAgent

------------------------------

A. Generate private key and certificate request

B. Install certificate from file

C. Install certificate and key from PKCS12 file

D. View current installed certificate

E. List CA certificates

F. Install a CA certificate

G. Delete a CA certificate

H. List registered certificates

I. Register certificate

J. Unregister a certificate

K. Export certificate and key to PKCS12 file

X. Quit

Choice:

From the Main Menu, you can generate a private key and certificate request, install

and delete certificates, register and unregister certificates, and list certificates. The

following sections summarize the purpose of each group of options.


The first set of options (A through D) allows you to generate a CSR and install the

returned signed certificate on the adapter.

A. Generate private key and certificate request

Generate a CSR and the associated private key that is sent to the certificate

authority. For more information on option A, see “Generating a private key

and certificate request” on page 37.

B. Install certificate from file

Install a certificate from a file. This file must be the signed certificate

returned by the CA in response to the CSR that is generated by option A.

For more information on option B, see “Installing the certificate” on page

38.

C. Install certificate and key from a PKCS12 file

Install a certificate from a PKCS12 format file that includes both the public

certificate and a private key. If options A and B are not used to obtain a

certificate, the certificate that you use must be in PKCS12 format. For more

information on option C, see “Installing the certificate and key from a

PKCS12 file” on page 38.

D. View current installed certificate

View the certificate that is installed on the system. For more information

on option D, see “Viewing the installed certificate” on page 39.

The second set of options enable you to install root CA certificates on the adapter.

A CA certificate is used by the Tivoli Identity Manager adapter to validate the

corresponding certificate presented by a client, such as the Tivoli Identity Manager

Server.

E. List CA certificates

Show the installed CA certificates. The adapter only communicates with

Tivoli Identity Manager Servers whose certificates are validated by one of

the installed CA certificates.

F. Install a CA certificate

Install a new CA certificate so that certificates generated by this CA can be

validated. The CA certificate file can either be in X.509 or PEM encoded

formats. For more information on how to install a CA certificate, see

“Installing a CA certificate” on page 39.

G. Delete a CA certificate

Remove one of the installed CA certificates. For more information on how

to delete a CA certificate, see “Deleting a CA certificate” on page 39.

The remaining options (H through K) apply to adapters that must authenticate the

application (for example, the Tivoli Identity Manager Server or the Web server) to

which the adapter is sending information. These options enable you to register

certificates on the adapter. For Tivoli Identity Manager Version 4.5 or earlier, the

signed certificate of the Tivoli Identity Manager Server must be registered with an

adapter to enable client authentication on the adapter. If you do not intend to

upgrade an existing adapter to use CA certificates for client authentication, the

signed certificate presented by the Tivoli Identity Manager Server must be

registered with the adapter.

If you configure the adapter to use event notification, or client authentication is

enabled in DAML, then you must install the CA certificate corresponding to the

signed certificate of the Tivoli Identity Manager Server using the Install a CA

certificate option, option F.


H. List registered certificates

List all registered certificates that will be accepted for communications. For

more information on listing registered certificates, see “Viewing registered

certificates” on page 40.

I. Register a certificate

Register a new certificate. The certificate to be registered be in Base 64

encoded X.509 format or PEM. For more information on registering

certificates, see “Registering a certificate” on page 40.

J. Unregister a certificate

Unregister (remove) a certificate from the registered list. For more

information on unregistering certificates, see “Unregistering a certificate”

on page 40.

K. Export certificate and key to PKCS12 file

Export a previously installed certificate and private key. You will be

prompted for the filename and a password for encryption. For more

information on exporting a certificate and key to a PKCS12 file, see

“Exporting a certificate and key to PKCS12 file” on page 40.

Generating a private key and certificate request

A certificate signing request is an unsigned certificate that is a text file. When you

submit an unsigned certificate to a certificate authority, the CA signs the certificate

with the private digital signature that is included in their corresponding CA

certificate. When the CSR is signed, it becomes a valid certificate. A CSR contains

information about your organization, such as the organization name, country, and

the public key for your Web server.

In order to generate a CSR file, complete these steps:

1. At the Main Menu of the CertTool, type A. The following message and prompt

are displayed:

Enter values for certificate request (press enter to skip value)

-------------------------------------------------------------------------

2. At the Organization prompt, type your organization name, and press Enter.

3. At the Organizational Unit prompt, type the organizational unit, and press

Enter.

4. At the Agent Name prompt, type the name of the adapter you are requesting

a certificate for, and press Enter.

5. At the Email prompt, type the e-mail address for the contact person for this

request, and press Enter.

6. At the State prompt, type the state in which the adapter resides (if the adapter

is in the United States), and press Enter. Some certificate authorities do not

accept two letter abbreviations for states, so you must type the full name of

the state.

7. At the Country prompt, type the country in which the adapter resides, and

press Enter.

8. At the Locality prompt, type the name of the city in which the adapter

resides, and press Enter.

9. At the Accept these values prompt, type Y to accept the values displayed, or

type N to re-enter the values, and press Enter.

The private key and certificate request are generated once the values are

accepted.


10. At the Enter name of file to store PEM cert request prompt, type the name of

the file that you want to use to store the values you specified during the

previous steps, and press Enter.

11. Press Enter to continue. The certificate request and input values are written to

the file you specified, and the Main Menu is displayed again.

You can now request a certificate from a trusted CA by sending the .pem file that

you just generated to a certificate authority vendor.

Example of certificate signing request

Your CSR file will look similar to the following example:

-----BEGIN CERTIFICATE REQUEST-----

MIIB1jCCAT8CAQAwgZUxEjAQBgNVBAoTCWFjY2VzczM2MDEUMBIGA1UECxMLZW5n

aW5lZXJpbmcxEDAOBgNVBAMTB250YWdlbnQxJDAiBgkqhkiG9w0BCQEWFW50YWdl

bnRAYWNjZXNzMzYwLmNvbTELMAkGA1UEBhMCVVMxEzARBgNVBAgTCkNhbGlmb3Ju

aWExDzANBgNVBAcTBklydmluZTCBnzANBgkqhkiG9w0BAQEFAAOBjQAwgYkCgYEA

mR6AcPnwf6hLLc72BmUkAwaXcebtxCoCnnTH9uc8VuMHPbIMAgjuC4s91hPrilG7

UtlbOfy6X3R3kbeR8apRR9uLYrPIvQ1b4NK0whsytij6syCySaFQIB6V7RPBatFr

6XQ9hpsARdkGytZmGTgGTJ1hSS/jA6mbxpgmttz9HPECAwEAAaAAMA0GCSqGSIb3

DQEBAgUAA4GBADxA1cDkvXhgZntHkwT9tCTqUNV9sim8N/U15HgMRh177jVaHJqb

N1Er46vQSsOOOk4z2i/XwOmFkNNTXRVl9TLZZ/D+9mGZcDobcO+lbAKlePwyufxK

Xqdpu3d433H7xfJJSNYLYBFkrQJesITqKft0Q45gIjywIrbctVUCepL2

-----END CERTIFICATE REQUEST-----

Installing the certificate

Once you receive your certificate from your trusted CA, you install it in the

registry of the adapter. In order to install the certificate, complete these steps:

1. If you received the certificate as part of an e-mail message, copy the text of the

certificate to a text file, and copy that file to the bin directory for the adapter.

For example,

/opt/tivoli/agents/SolarisAgent/bin

2. At the Main Menu of the CertTool, type B. The following prompt is displayed:

Enter name of certificate file:

-------------------------------------------------------------------------

3. At the Enter name of certificate file prompt, type the full path to the

certificate file, and press Enter.

The certificate is installed in the registry for the adapter, and the Main Menu is

displayed again.

Installing the certificate and key from a PKCS12 file

If you do not use the CertTool utility to generate a CSR to obtain a certificate, you

must install both the certificate and private key, which must be stored in a PKCS12

file. The CA might send a password−protected file, or PKCS12 file (a file with the

.pfx extension), which includes both the certificate and private key. In order to

install the certificate from this PKCS12 file, complete these steps:

1. Copy the PKCS12 file to the bin directory for the adapter. For example,

/opt/tivoli/agents/SolarisAgent/bin

2. At the Main Menu for the CertTool, type C. The following prompt is displayed:

Enter name of PKCS12 file:

-------------------------------------------------------------------------

3. At the Enter name of PKCS12 file prompt, type the name of the PKCS12 file

that has the certificate and private key information, and press Enter. For

example, DamlSrvr.pfx.

4. At the Enter password prompt, type the password to access the file, and press

Enter.


The certificate and private key are installed in the adapter registry, and the Main

Menu is displayed.

Viewing the installed certificate

In order to list the certificate that is installed on your system, at the Main Menu of

CertTool, type D.

The installed certificate is listed, and the Main Menu is displayed. The following

example lists an installed certificate:

The following certificate is currently installed.

Subject: c=US,st=California,l=Irvine,o=DAML,cn=DAML Server

Installing a CA certificate

If you are using client authentication, you need to install a CA certificate. The CA

certificate you install is issued by a certificate authority vendor.

In order to install a CA certificate that was extracted into a temporary file,

complete the following steps:

1. At the Main Menu prompt, type F (Install a CA certificate).

The following prompt is displayed:


2. At the Enter name of certificate file prompt, type the name of the certificate

file, such as DamlCACerts.pem, and press Enter.

The certificate file is opened, and the following prompt is displayed:

[email protected],c=US,st=California,l=Irvine,o=IBM,ou=Engineering,cn=Eng

Install the CA? (Y/N)

3. At the Install the CA prompt, type Y to install the certificate, and press Enter.

The certificate file is installed in the CACerts.pem file.

Viewing CA certificates

CertTool only installs one certificate and one private key. In order to list the CA

certificate that is installed on the adapter, type E at the Main Menu prompt.

The installed CA certificates are displayed and the Main Menu is displayed. The

following example lists an installed CA certificate:

Subject: o=IBM,ou=SampleCACert,cn=TestCA

Valid To: Wed Jul 26 23:59:59 2006

Deleting a CA certificate

In order to delete a CA certificate from the adapter directories, complete the

following steps:

1. At the Main Menu prompt, type G.

A list of all CA certificates installed on the adapter is displayed.

0 - [email protected],c=US,st=California,l=Irvine,o=IBM,ou=Engineering,cn=Eng

1 - [email protected],c=US,st=California,l=Irvine,o=IBM,ou=Support,cn=Support

Enter number of CA certificate to remove:

2. At the Enter number of CA certificate to remove prompt, type the number of

the CA certificate that you want to remove, and press Enter.

The CA certificate is deleted from the CACerts.pem file, and the Main Menu is

displayed.


Viewing registered certificates

Only requests that present a registered certificate will be accepted by the adapter

when client validation is enabled.

In order to view a list of all registered certificates available to the adapter, at the

Main Menu prompt, type H.

The registered certificates are displayed and the Main Menu is displayed. The

following example lists registered certificates:



Registering a certificate

In order to register a certificate for the adapter, complete the following steps:

1. At the Main Menu prompt, type I.



2. At the Enter name of certificate file prompt, type the name of the certificate

file that you want to register, and press Enter.

The subject of the certificate is displayed, and a prompt is displayed, for

example:


Register this CA? (Y/N)

3. At the Register this CA prompt, type Y to register the certificate, and press

Enter.

The certificate is registered to the adapter, and the Main Menu is displayed.

Unregistering a certificate

In order to unregister a certificate for the adapter, complete the following steps:

1. At the Main Menu prompt, type J.

The registered certificates are displayed. The following example lists registered

certificates:



2. Type the number of the certificate file that you want to unregister, and press

Enter.

The subject of the selected certificate is displayed, and a prompt is displayed,

for example:


Unregister this CA? (Y/N)

3. At the Unregister this CA prompt, type Y to unregister the certificate, and

press Enter.

The certificate is removed from the registered certificate list for the adapter, and

the Main Menu is displayed.

Exporting a certificate and key to PKCS12 file

In order to export a certificate and key to a PKCS12 file for the adapter, complete

the following steps:

1. At the Main Menu prompt, type K.



Enter name of PKCS12 file:

2. At the Enter name of PKCS12 file prompt, type the name of the PKCS12 file

for the installed certificate or private key, and press Enter.

3. At the Enter Password prompt, type the password for the PKCS12 file, and

press Enter.

4. At the Confirm Password prompt, type the password again, and press Enter.

The certificate or private key is exported to the PKCS12 file, and the Main

Menu is displayed.


Chapter 5. Customizing the Solaris adapter

You can update the Solaris Adapter JAR file, SolarisProfile.jar, to make changes to

the adapter schema, account form, service form, and profile properties. In order to

make such updates, you must extract the files from the JAR file, make changes to

the necessary files, and repackage the JAR file with the updated files.

Complete these steps to customize the Solaris Adapter profile:

1. Copy the JAR file to a temporary directory and extract the files. For more

information on extracting the files, see “Copy the SolarisProfile.jar file and

extract the files.”

2. Make the appropriate file changes.

3. Install the new attributes on the Tivoli Identity Manager Server. For more

information on updating this file, see “Create a new JAR file and install the

new attributes on the Tivoli Identity Manager Server” on page 44.

Copy the SolarisProfile.jar file and extract the files

The profile JAR file, SolarisProfile.jar, is included in the Solaris Adapter

compressed file that you downloaded from the IBM Web site. The SolarisProfile.jar

file contains the following files:

v CustomLabels.properties

v erSolarisAccount.xml

v erSolarisDAMLService.xml

v resource.def

v schema.dsml

You can modify these files to customize your environment.

When you finish updating the profile JAR file, install it on the Tivoli Identity

Manager Server. For more information on the profile installation, see “Importing

the adapter profile into the Tivoli Identity Manager Server” on page 5.

In order to modify the SolarisProfile.jar file, complete the following steps:

1. Log into the system where the Solaris Adapter is installed.

2. Copy the SolarisProfile.jar file into a temporary directory.

3. Extract the contents of` the SolarisProfile.jar file into the temporary directory by

running the following command:

#cd /tmp

jar -xvf SolarisProfile.jar

The jar command will create the /tmp/SolarisProfile directory.

4. Edit the appropriate file.


Create a new JAR file and install the new attributes on the Tivoli

Identity Manager Server

Once you modify the schema.dsml and CustomLabels.properties files, you must

import these files, and any other files that were modified for the adapter, into the

Tivoli Identity Manager Server for the changes to take effect.

In order to install the new attributes, complete the following steps:

1. Create a new JAR file using the files in the /temp directory by running the

following commands:

#cd /tmp

jar -cvf SolarisProfile.jar SolarisProfile

2. Import the SolarisProfile.jar file into the Tivoli Identity Manager Application

Server. For more information on importing the file, see “Importing the adapter

profile” on page 5.

3. Stop and start the directory server.

4. Stop and start the Solaris Adapter service for the changes to take effect.

Managing passwords when restoring accounts

When a person’s accounts are restored from being previously suspended, you are

prompted to supply a new password for the reinstated accounts. However, there

are circumstances when you might want to circumvent this behavior.

The password requirement to restore an account on Solaris Server falls into two

categories: allowed and required. How each restore action interacts with its

corresponding managed resource depends on either the managed resource, or the

business processes that you implement. Certain resources will reject a password

when a request is made to restore an account. In this case, you can configure Tivoli

Identity Manager to forego the new password requirement. You can set the Solaris

Adapter to require a new password when the account is restored, if your company

has a business process in place that dictates that the account restoration process

must be accompanied by resetting the password.

In the resource.def file, you can define whether or not a password is required as a

new protocol option. When you import the adapter profile, if an option is not

specified, the adapter profile importer determines the correct restoration password

behavior from the schema.dsml and xforms.xml files. Adapter profile components

also enable remote services to find out if you discard a password that is entered by

the user in a situation where multiple accounts on disparate resources are being

restored. In this scenario, only some of the accounts being restored might require a

password. Remote services will discard the password from the restore action for

those managed resources that do not require them.

In order to configure the Solaris Adapter to not prompt for a new password when

restoring accounts:

1. Stop the Tivoli Identity Manager Server.

2. Extract the files from the SolarisProfile.jar file. For more information on

customizing the adapter profile file, see “Copy the SolarisProfile.jar file and

extract the files” on page 43.

3. Change to the \SolarisProfile directory, where the resource.def file has been

created.

4. Edit the resource.def file to add the new protocol options, for example:


<Property Name = "com.ibm.itim.remoteservices.ResourceProperties.

PASSWORD_NOT_REQUIRED_ON_RESTORE" Value = "TRUE"/>

<Property Name = "com.ibm.itim.remoteservices.ResourceProperties.

PASSWORD_NOT_ALLOWED_ON_RESTORE" Value = "FALSE"/>

By adding the two options in the example above, you are ensuring that you

will not be prompted for a password when an account is restored.

5. Create a new SolarisProfile.jar file using the resource.def file and import the

adapter profile file into the Tivoli Identity Manager Server. For more

information, see “Create a new JAR file and install the new attributes on the

Tivoli Identity Manager Server” on page 44.

6. Start the Tivoli Identity Manager Server again.

Note: If you are upgrading an existing adapter profile, the new adapter profile

schema will not be reflected immediately. You need to stop and start the

Tivoli Identity Manager Server in order to refresh the cache and therefore

the adapter schema. For more information on upgrading an existing adapter,

see “Upgrading the Solaris adapter” on page 47.

Chapter 5. Customizing the Solaris adapter 45

Chapter 6. Upgrading the Solaris adapter or the ADK

You can either upgrade the Solaris Adapter or the Adapter Development Kit

(ADK). The ADK is the base component of the adapter. While all adapters have the

same ADK, the remaining adapter functionality is specific to the managed

resource.

You can perform an adapter upgrade to migrate your current adapter installation

to a newer version, for example version 4.4 to version 4.6. Upgrading the adapter,

as opposed to reinstalling it, will allow you to keep your configuration settings.

Additionally, you will not have to uninstall the current adapter and install the

newer version.

However, if a code fix has been made to the ADK, instead of upgrading the entire

adapter, you can upgrade just the ADK to the newer version.

Upgrading the Solaris adapter

During an upgrade, in order to maintain all of your current configuration settings,

as well as the certificate and private key, do not uninstall the old version of the

adapter before installing the new version. During the install, specify the same

installation directory where the previous adapter was installed. For more

information on how to install the adapter, see Chapter 2, “Installing and

configuring the Solaris adapter,” on page 3.

If you currently have version 4.4 or 4.5 of the Solaris Adapter installed, and you

want version 4.6, an upgrade of the adapter is necessary. Upgrading the adapter

involves several steps that you must complete in the appropriate sequence.

In order to upgrade an existing adapter, complete the following steps:

1. Stop the Solaris Adapter service.

2. Install the new version of the adapter.

When the upgraded adapter starts for the first time, new log files will be created,

replacing the old files.

Upgrading the ADK

The ADK consists of the runtime library, filtering and event notification

functionality, protocol settings, and logging information. The remainder of the

adapter is comprised of the Add, Modify, Delete, and Search functions. While all

adapters have the same ADK, the remaining functionality is specific to the

managed resource.

You can use the ADK upgrade program to update the ADK portion of the adapters

that are currently installed on a machine. This allows you to install just the ADK,

and not the entire adapter. As part of the ADK upgrade, the ADK library and the

DAML protocol library are updated. In addition, the agentCfg and CertTool

binaries are updated.


Prior to upgrading the ADK files, the upgrade program checks the current version

of the ADK. If the current level is higher than what you are attempting to install, a

warning message is displayed.

In order to upgrade the Solaris Adapter ADK, complete the following steps:

1. Download the ADK upgrade program file from the IBM Web site.

2. Extract the contents of the compressed file into a temporary directory.

3. Change the working directory to the temporary directory where you extracted

the adapter installation files. For example:

# cd /tmp

4. Run the ADK upgrade program that is appropriate for your operating system.

# ./adkinst_<operating system>.bin

where <operating system> is the name of your operating system, such as aix,

solaris, linux, or hpux.


6. On the Software License Agreement window, review the license agreement

and decide if you accept the terms of the license. If you do, click Accept.

7. On the Agent Install Path window, type the location where the adapter is

currently installed, and click Next.

If no adapter is found, you will receive the following error message:

Invalid Install Location - Cannot Install ADK.

You will then be prompted to enter another adapter installation path or click

Cancel to exit the program.

8. On the Installation Information window, click Next to begin the installation.

9. If the adapter is currently running, the Stop Agent window will be displayed,

prompting you to stop the adapter.

10. On the Install Completed window, click Next.

11. On the Upgrade Another ADK window, click Yes to upgrade another

adapter’s ADK, or click No to exit the program.

Log files

Logging entries are stored in the <ADKVersion>Installer.log and

<ADKVersion>Installeropt.log files, where <ADKVersion> is the version of the ADK.

For example, ADK46Installer.log and ADK46Installeropt.log. These files are

created in the folder where you run the installation program.


Chapter 7. Uninstalling the Solaris adapter

Before you remove the adapter, inform your users that the Solaris Adapter will be

unavailable and removed from the system. If the server is taken offline, Solaris

Adapter requests that are not completed will not be recoverable when the server is

back online.

In order to remove the Solaris Adapter, complete these steps:

1. From the /bin directory, type ./StopAgent.sh to stop the Solaris Adapter

service.

2. From the <adapter_directory>/_uninst directory, type ./uninstaller.bin and press

Enter to run the uninstallation script, where adapter_directory is the directory

where the adapter was installed.


4. On the Solaris Adapter uninstallation summary window, click Next.

5. On the Remove Existing File window, click Yes to All if you want to remove

the adapter log files or click No to All to keep the files.

6. Click Finish.

Inspect the directory tree to verify that Solaris Adapter directories,

subdirectories, and files have been deleted.


Appendix A. Adapter attributes

As part of the adapter implementation, a dedicated account for Tivoli Identity

Manager to access the Solaris Server is created on the Solaris Server. The Solaris

Adapter consists of files and directories that are owned by the Tivoli Identity

Manager account. These files establish communication with the Tivoli Identity

Manager Server.

There are no adapter attributes to Delete, Suspend, Restore, and Reconcile an

access. To perform these access functions, use the corresponding GUI interface

options. The default data is already included in the Tivoli Identity Manager

database. The data for these functions can be changed manually in the xforms.XML

file.

Attribute descriptions

The Tivoli Identity Manager Server communicates with the Solaris Adapter using

attributes that are included in transmission packets that are sent over a network.

The combination of attributes, included in the packets, depends on the type of

action that the Tivoli Identity Manager Server requests from the Solaris Adapter.

Table 12 is an alphabetical listing of the attributes that are used by the Solaris

Adapter. The table gives a brief description and the data type for the value of the

attribute.

Table 12. Attributes, descriptions, and corresponding data types

Attribute Directory server attribute Description Data type

GroupId erSolarisGroupId Specifies the group ID

that the user belongs to

String

GroupMember erSolarisGroupMember Specifies the secondary

group ID that the user

belongs to

String

GroupName erSolarisGroupName Specifies the group

name that is returned

during a reconciliation

String

lu_at erSolarisAT Specifies the flag that

will set a job to either

allowed or not allowed

Boolean

lu_cron erSolarisCRON Specifies the flag that

will set a cron job to

allowed or not allowed

Boolean

lu_dupuid erUnixDuplicateUID Specifies the flag that

indicates whether a

duplicate user ID is

allowed during an add

request

Boolean

lu_expire erExpirationDate Specifies the expiration

date for the user

account

Integer


Table 12. Attributes, descriptions, and corresponding data types (continued)


lu_force erPasswordForceChange Specifies whether the

user has to change their

password at the next log

in

String

lu_gecos gecos Specifies the main

GECOS field and is a

general description of

the user.

ASCII string

lu_gid gidNumber Specifies the group ID

number that the user

belongs to

Integer

lu_home_mode erHomeDirPermissions Specifies the three digit

change file mode value

for the user home

directory

Integer

lu_home_path erHomeDir Specifies the fully

qualified UNIX path for

the user account

String

lu_idle_days erAccountIdleDays Specifies the maximum

number of days that the

user account can be

inactive

Integer

lu_last_access erLastAccessDate Specifies the date that

the user account was

last accessed

Integer

lu_passwd erPassword Specifies the user

password as a

write-only character

string, being eight or

less characters in length

String

lu_primary_group erUnixPrimaryGroup Specifies the primary

group name or group ID

ASCII string

lu_pwd_last_change erPasswordLastChange Specifies the date that

the password was last

changed

Integer

lu_pwd_max_age erPasswordMaxAge Specifies the maximum


password is valid

Integer

lu_pwd_max_expired erSolarisPwdMaxExpire Specifies the number of

weeks between the

password expiration and

account lock out

Integer

lu_pwd_max_repeats erSolarisPwdMaxRepeats Specifies the maximum

number of repeated

characters allowed in a

password

Integer

lu_pwd_min_age erPasswordMinAge Specifies the minimum


current password is

valid

Integer


Table 12. Attributes, descriptions, and corresponding data types (continued)


lu_pwd_warn_age erPasswordWarnAge Specifies the number of

days left before a

password expiration

warning will be issued

Integer

lu_secondary_groups erUnixSecondaryGroup Specifies the group

name or group ID for

secondary groups

String

lu_shell erUnixShell Specifies a valid login

shell for requested user

accounts

String

lu_uid uidNumber Specifies the login ID

number of the user

Integer

lu_umask erUnixUMask Specifies the three digit

number for file creation

mask

Integer

UserName erUid Specifies the user login

name

ASCII string

UserStatus erAccountStatus Specifies the flag that

indicates whether or not

a user account is

suspended

Boolean

Solaris adapter attributes by action

The following lists are typical Solaris Adapter actions by their functional

transaction group. The lists include more information about required and optional

attributes sent to the Solaris Adapter to complete that action.

Ping

Use Ping to verify connection between the Solaris Adapter and the Tivoli Identity

Manager Server. Ping does not require any attributes.

System Login Add

A System Login Add is a request to create a new user account in the domain with

the specified attributes.

Table 13. Add request attributes

Required attribute Optional attribute

erUid

erPassword

All other supported attributes

System Login Change

A System Login Change is a request to change one or more attributes for the

specified users.

Appendix A. Adapter attributes 53

Table 14. Change request attributes


erUid All other supported attributes

System Login Delete

A System Login Delete is a request to remove the specified user from the Active

Directory.

Table 15. Delete request attributes


erUid None

System Login Suspend

A System Login Suspend is a request to disable a user account. The user is neither

removed nor are their attributes modified.

Table 16. Suspend request attributes


erUid

erAccountStatus

None

System Login Restore

A System Login Restore is a request to activate a user account that was previously

suspended. Once an account is restored, the user can access the system with the

same attributes as those before the Suspend function was called.

Table 17. Restore request attributes


erUid

erAccountStatus

erPassword

Reconciliation

The Reconciliation function synchronizes user account information between Tivoli

Identity Manager and the adapter.

Table 18. Reconciliation attributes


None None


Appendix B. Support information

This section describes the following options for obtaining support for IBM

products:

v “Searching knowledge bases”

v “Obtaining fixes” on page 56

v “Contacting IBM Software Support” on page 56

Searching knowledge bases

If you have a problem with your IBM software, you want it resolved quickly. Begin

by searching the available knowledge bases to determine whether the resolution to

your problem is already documented.

Search the information center on your local system or

network

IBM provides extensive documentation that can be installed on your local

computer or on an intranet server. You can use the search function of this

information center to query conceptual information, instructions for completing

tasks, reference information, and support documents.

Search the Internet

If you cannot find an answer to your question in the information center, search the

Internet for the latest, most complete information that might help you resolve your

problem. To locate Internet resources for your product, open one of the following

Web sites:

v IBM Tivoli Identity Manager Performance Tuning Guide

Provides information needed to tune Tivoli Identity Manager Server for a

production environment, available on the Web at:


Click the I character in the A-Z product list, and then, click the Tivoli Identity

Manager link. Browse the information center for the Technical Supplements

section.

v Redbooks and white papers are available on the Web at:

http://www.ibm.com/software/sysmgmt/products/support/IBMTivoliIdentityManager.html

Browse to the Self Help section, in the Learn category, and click the Redbooks

link.

v Technotes are available on the Web at:


v Field guides are available on the Web at:


v For an extended list of other Tivoli Identity Manager resources, search the

following IBM developerWorks Web address:









Obtaining fixes

A product fix might be available to resolve your problem. You can determine what

fixes are available for your IBM software product by checking the product support

Web site:

1. Go to the IBM Software Support Web site

(http://www.ibm.com/software/support).

2. Under Products support pages A to Z, select the letter for your product name.

3. In the list of specific products, click IBM Tivoli Identity Manager.

4. Under Self help, you find a list of fixes, fix packs, and other service updates

for your product.

5. Click the name of a fix to read the description and optionally download the fix.

To receive weekly e-mail notifications about fixes and other news about IBM

products, follow these steps:

1. From the support page for any IBM product, click My support in the upper-left

corner of the page.

2. If you have already registered, skip to the next step. If you have not registered,

click register in the upper-right corner of the support page to establish your

user ID and password.

3. Sign in to My support.

4. On the My support page, click Edit profiles in the left navigation pane, and

scroll to Select Mail Preferences. Select a product family and check the

appropriate boxes for the type of information you want.

5. Click Submit.

6. For e-mail notification for other products, repeat Steps 4 and 5.

For more information about types of fixes, see the Software Support Handbook

(http://techsupport.services.ibm.com/guides/handbook.html).

Contacting IBM Software Support

IBM Software Support provides assistance with product defects.

Before contacting IBM Software Support, your company must have an active IBM

software maintenance contract, and you must be authorized to submit problems to

IBM. The type of software maintenance contract that you need depends on the

type of product you have:

v For IBM distributed software products (including, but not limited to, Tivoli,

Lotus, and Rational products, as well as DB2 and WebSphere products that run

on Windows or UNIX operating systems), enroll in Passport Advantage in one

of the following ways:

– Online: Go to the Passport Advantage Web page

(http://www.lotus.com/services/passport.nsf/WebDocs/

Passport_Advantage_Home) and click How to Enroll

– By phone: For the phone number to call in your country, go to the IBM

Software Support Web site

(http://techsupport.services.ibm.com/guides/contacts.html) and click the

name of your geographic region.v For IBM eServer software products (including, but not limited to, DB2 and

WebSphere products that run in zSeries, pSeries, and iSeries environments), you

can purchase a software maintenance agreement by working directly with an

IBM sales representative or an IBM Business Partner. For more information


http://www.ibm.com/software/support

http://techsupport.services.ibm.com/guides/handbook.html



http://techsupport.services.ibm.com/guides/contacts.html

about support for eServer software products, go to the IBM Technical Support

Advantage Web page (http://www.ibm.com/servers/eserver/techsupport.html).

If you are not sure what type of software maintenance contract you need, call

1-800-IBMSERV (1-800-426-7378) in the United States or, from other countries, go to

the contacts page of the IBM Software Support Handbook on the Web

(http://techsupport.services.ibm.com/guides/contacts.html) and click the name of

your geographic region for phone numbers of people who provide support for

your location.

Follow the steps in this topic to contact IBM Software Support:

1. Determine the business impact of your problem.

2. Describe your problem and gather background information.

3. Submit your problem to IBM Software Support.

Determine the business impact of your problem

When you report a problem to IBM, you are asked to supply a severity level.

Therefore, you need to understand and assess the business impact of the problem

you are reporting. Use the following criteria:

Severity 1 Critical business impact: You are unable to use the program,

resulting in a critical impact on operations. This condition

requires an immediate solution.

Severity 2 Significant business impact: The program is usable but is

severely limited.

Severity 3 Some business impact: The program is usable with less

significant features (not critical to operations) unavailable.

Severity 4 Minimal business impact: The problem causes little impact on

operations, or a reasonable circumvention to the problem has

been implemented.

Describe your problem and gather background information

When explaining a problem to IBM, be as specific as possible. Include all relevant

background information so that IBM Software Support specialists can help you

solve the problem efficiently. To save time, know the answers to these questions:

v What software versions were you running when the problem occurred?

v Do you have logs, traces, and messages that are related to the problem

symptoms? IBM Software Support is likely to ask for this information.

v Can the problem be re-created? If so, what steps led to the failure?

v Have any changes been made to the system? (For example, hardware, operating

system, networking software, and so on.)

v Are you currently using a workaround for this problem? If so, please be

prepared to explain it when you report the problem.

Submit your problem to IBM Software Support

You can submit your problem in one of two ways:

v Online: Go to the ″Submit and track problems″ page on the IBM Software

Support site (http://www.ibm.com/software/support/probsub.html). Enter

your information into the appropriate problem submission tool.

Appendix B. Support information 57

http://www.ibm.com/servers/eserver/techsupport.html


http://www.ibm.com/software/support/probsub.html

v By phone: For the phone number to call in your country, go to the contacts page

of the IBM Software Support Handbook on the Web

(http://techsupport.services.ibm.com/guides/contacts.html) and click the name

of your geographic region.

If the problem you submit is for a software defect or for missing or inaccurate

documentation, IBM Software Support creates an Authorized Program Analysis

Report (APAR). The APAR describes the problem in detail. Whenever possible,

IBM Software Support provides a workaround for you to implement until the

APAR is resolved and a fix is delivered. IBM publishes resolved APARs on the

IBM product support Web pages daily, so that other users who experience the

same problem can benefit from the same resolutions.

For more information about problem resolution, see Searching knowledge bases

and Obtaining fixes.



Appendix C. Notices

This information was developed for products and services offered in the U.S.A.

IBM may not offer the products, services, or features discussed in this document in

other countries. Consult your local IBM representative for information on the

products and services currently available in your area. Any reference to an IBM

product, program, or service is not intended to state or imply that only that IBM

product, program, or service may be used. Any functionally equivalent product,

program, or service that does not infringe any IBM intellectual property right may

be used instead. However, it is the user’s responsibility to evaluate and verify the

operation of any non-IBM product, program, or service.

IBM may have patents or pending patent applications covering subject matter

described in this document. The furnishing of this document does not give you

any license to these patents. You can send license inquiries, in writing, to:

IBM Director of Licensing

IBM Corporation

North Castle Drive

Armonk, NY 10504-1785

U.S.A.

For license inquiries regarding double-byte (DBCS) information, contact the IBM

Intellectual Property Department in your country or send inquiries, in writing, to:

IBM World Trade Asia Corporation

Licensing

2-31 Roppongi 3-chome, Minato-ku

Tokyo 106-0032, Japan

The following paragraph does not apply to the United Kingdom or any other

country where such provisions are inconsistent with local law:

INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS

PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER

EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS

FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or

implied warranties in certain transactions, therefore, this statement may not apply

to you.

This information could include technical inaccuracies or typographical errors.

Changes are periodically made to the information herein; these changes will be

incorporated in new editions of the publication. IBM may make improvements

and/or changes in the product(s) and/or the program(s) described in this

publication at any time without notice.

Any references in this information to non-IBM Web sites are provided for

convenience only and do not in any manner serve as an endorsement of those Web

sites. The materials at those Web sites are not part of the materials for this IBM

product and use of those Web sites is at your own risk.

IBM may use or distribute any of the information you supply in any way it

believes appropriate without incurring any obligation to you.


Licensees of this program who wish to have information about it for the purpose

of enabling: (i) the exchange of information between independently created

programs and other programs (including this one) and (ii) the mutual use of the

information which has been exchanged should contact:

IBM Corporation

2ZA4/101

11400 Burnet Road

Austin, TX 78758

U.S.A.

Such information may be available, subject to appropriate terms and conditions,

including in some cases, payment of a fee.

The licensed program described in this information and all licensed material

available for it are provided by IBM under terms of the IBM Customer Agreement,

IBM International Program License Agreement, or any equivalent agreement

between us.

Any performance data contained herein was determined in a controlled

environment. Therefore, the results obtained in other operating environments may

vary significantly. Some measurements may have been made on development-level

systems and there is no guarantee that these measurements will be the same on

generally available systems. Furthermore, some measurements may have been

estimated through extrapolation. Actual results may vary. Users of this document

should verify the applicable data for their specific environment.

Information concerning non-IBM products was obtained from the suppliers of

those products, their published announcements or other publicly available sources.

IBM has not tested those products and cannot confirm the accuracy of

performance, compatibility or any other claims related to non-IBM products.

Questions on the capabilities of non-IBM products should be addressed to the

suppliers of those products.

Trademarks

The following terms are trademarks or registered trademarks of International

Business Machines Corporation in the United States, other countries, or both:

IBM

IBM logo

AIX

DB2

Novell

SecureWay

Tivoli

Tivoli logo

Universal Database

WebSphere

Lotus is a registered trademark of Lotus Development Corporation and/or IBM

Corporation.

Domino is a trademark of International Business Machines Corporation and Lotus

Development Corporation in the United States, other countries, or both.


Microsoft, Windows, Windows NT, and the Windows logo are trademarks of

Microsoft Corporation in the United States, other countries, or both.

Intel, Intel Inside (logos), MMX and Pentium are trademarks of Intel Corporation

in the United States, other countries, or both.

UNIX is a registered trademark of The Open Group in the United States and other

countries.

Linux is a trademark of Linus Torvalds in the U.S., other countries, or both.

Sun, Sun Microsystems, and the Sun Logo are trademarks or registered trademarks

of Sun Microsystems, Inc. in the United States and other countries.

Java and all Java-based trademarks are trademarks of Sun

Microsystems, Inc. in the United States, other countries, or

both.

Other company, product, and service names may be trademarks or service marks

of others.

Appendix C. Notices 61

Index

Aaccessibility

pdf format, for screen-reader software viii

statement for documentation viii

text, alternative for document images viii

activity logging 19

adapterADK upgrade 47

attributesby adapter action 53

descriptions 51

configuration steps 7

customization steps 43

installation overview 1

installation prerequisites 3

removal 49

upgrade 47

adapter configuration toolSee agentCfg

adapter overview 1

ADK46Installer.log file 48

ADK46Installeropt.log file 48

administrator authority 3

agentCfgarguments 25

changing adapter parametersconfiguration key 19

protocol settings 11

registry settings 21

request processing 23

menusactivity logging 19

advanced settings 23

event notification 14

help 25

Main Configuration 9

Protocol Configuration 10

registry 21

viewing configuration settings 10

attributesby Solaris Adapter action

add 53

change 53

delete 54

restore 54

suspend 54

descriptions 51

Bbooks

see publications viii

Ccertificate authority

definition 29

certificate signing request (CSR) 38

certificatesCA

available functions 36

deleting 39

installing 39

viewing installed 39

certificate management toolsSee CertTool

definition 29

examplescertificate signing request (CSR) 38

install 38

installationfrom file 38

sample 38

key formats 31

overview 29

private keys and digital certificates 30

protocol configuration toolSee CertTool

register 36

registeredregistering 40

removing 40

viewing 40

request 37

self-signed 30

viewinginstalled 39

registered 40


viewing registered 40

CertToolCA certificate

deleting 39

installing 39

viewing 39

certificateinstall 38

register 36

request 37


viewing registered 40

changing adapter parametersaccessing 31, 35

options 36

client authentication 36

install certificate 38

private key, generating 37

registered certificateregistering 40

removing 40

viewing 40

character sets, supported 23

client authentication 33

client validation, SSL 34

configurationkey

changing with agentCfg 19

default value 9, 19

purpose 9


configuration (continued)settings


default value 10

viewing with agentCfg 10

SSL 32

contextbaseline database 19

deleting 15

listing 16

modifying 17

search attributes 17

target DN 18

conventionsHOME directory

Tivoli_Common_Directory xi

DB_INSTANCE_HOME x

HTTP_HOME xi

ITIM_HOME xi

LDAP_HOME x

typeface ix

UNIX variable, directory notation ix

used in this document ix

CSRdefinition 37

file, generating 37

customer supportsee Software Support 56

DDAML protocol

configuring with agentCfg 11

encryptiondefault value 11

type 11

options 11

properties, changing with agentCfgoptions 11

password 12

portnumber 12

require_cert_reg 13

srv_nodename 12

srv_portnumber 12

username 11

validate_client_ce 13

SSL authentication 31

DB_INSTANCE_HOMEDB2 UDB installation directory x

definition x

debug logdefault value 19

enable/disable with agentCfg 19

purpose 20

detail logdefault value 19

enable/disable with agentCfg 19

purpose 20

directoryDB_INSTANCE_HOME x

HTTP_HOME xi

installationDB2 UDB x

IBM Directory Server x

IBM HTTP Server xi

installation for Sun ONE Directory Server x

ITIM_HOME xi

directory (continued)LDAP_HOME x

names, UNIX notation ix

disabilities, using documentation viii

documentsrelated viii

Tivoli Identity Manager library v

Eenable/disable with agentCfg 19

encrypted registry settings 21

encryptionDAML protocol

default value 11

type 11

SSL 29, 30

environment variableUNIX notation ix

event notificationcache size 15


contextbaseline database 19

deleting 15

listing 16

modifying 17

search attributes 17

target DN 18

enable/disable 15

reconciliationattributes 15

context 15

intervals 15

modifying 15

process priority 15

starting manually 15

Ffixes, obtaining 56

Hhelp menu for agentCfg 25

accessing with -help command 25

home directoriesDB_INSTANCE_HOME x

HTTP_HOME xi

ITIM_HOME xi

LDAP_HOME x

HTTP_HOMEdefinition xi

IBM HTTP Server installation directory xi

Iimport

adapter profile 5, 44

PKCS12 file 31

information centers, searching to find software problem

resolution 55

installationcertificate 38


installation (continued)directory

DB2 UDB x

IBM Directory Server x

IBM HTTP Server xi

Sun ONE Directory Server x

prerequisites 3

profile 5

uninstall 49

installation prerequisitesadministrator authority 3

communication with Tivoli Identity Manager Server 3

network connectivity 3

operating system 3

system 3

Tivoli Identity Manager Server 3

Internet, searching to find software problem resolution 55, 56

ITIM_HOMEdefinition xi

directory xi

Kknowledge bases, searching to find software problem

resolution 55

LLDAP_HOME

definition x

IBM Directory Server installation directory x

Sun ONE Directory Server installation directory x

logsactivity settings, changing 10

ADK46Installer.log file 48

ADK46Installeropt.log file 48

debug 19

detail 19

directory, changing with agentCfg 20

display using agentCfg 26

enable/disable, changing with agentCfg 20

file name, changing with agentCfg 19

settings, changing with adapterCfg 20

settings, changing with agentCfglog file name 20

max file size 20

settings, default values 19

statistics 24

trace.log file 5

view events 10

viewing statistics 24

Mmanuals

see publications viii

Nnetwork connectivity 3

non-encrypted registry settings 21

Oonline publications

accessing viii

operating system prerequisites 3

Ppassword protected file

See PKCS12 file

passwordschanging configuration key 19

configuration key, default value 9, 19

passwords, changing with agentCfgDAML protocol 12

path names, notation ix

pdf format, for screen-reader software viii

PKCS12 filecertificate and key installation 38

export certificate and key 40

portnumberchanging with agentCfg 11

portnumber, changing with agentCfg 12

private keydefinition 29

private key, generating 37

problem determinationdescribing problem for IBM Software Support 57

determining business impact for IBM Software Support 57

submitting problem to IBM Software Support 57

properties, changing with agentCfg 11

protocolDAML

configuring with agentCfg 11

encryption default value 11

encryption type 11

properties, changing with agentCfg 11

SSLoverview 29

server-to-adapter configuration 32

two-way configuration 33, 34

public key 30

publicationsaccessing online viii

related viii

Tivoli Identity Manager library v

Rreconciliation

attributes 15

context 15

intervals 15

modifying 15

process priority 15

registry settingsencrypted 21

non-encrypted 21

require_cert_reg, changing with agentCfg 13

restoring accountspassword requirements 44

Sself-signed certificate 30

Index 65

Software Supportcontacting 56

describing problem for IBM Software Support 57

determining business impact for IBM Software Support 57

submitting problem to IBM Software Support 57

srv_nodename, changing with agentCfg 12

srv_portnumber, changing with agentCfg 12

SSLcertificate installation 29

certificate signing request 37

encryption 29

key formats 31

overview 29

private keys and digital certificates 30

self-signed certificates 30

server-to-adapter configuration 32

two-way configuration 33, 34

SSL implementations, DAML protocol 31

system prerequisites 3

Ttext, alternative for document images viii

thread count settingschanging with agentCfg 23

default values 23

maximum concurrent requests 23

reconciliation requests 23

system login add requests 23

system login change requests 23

system login delete requests 23

Tivoli Identity Manager Adaptercommunication with the server 33, 34

SSL communication 33, 34

Tivoli Identity Manager Servercommunication with the adapter 32

configuring event notification 14

importing adapter profile 5

SSL communication 32

Tivoli Identity Manager Server prerequisites 3

Tivoli software information center viii

Tivoli_Common_Directorydefinition xi

trace.log file 5

two-way configurationSSL

client 33

client and server 34

typeface conventions ix

Uuninstallation 49

updatingadapter profile 43

upgradeadapter 47

adapter profile 5

ADK 47

username, changing with agentCfg 11

UTF8 support 23

Vvalidate_client_ce, changing with agentCfg 13

Wwestern European character set, support 23


��

Printed in USA

SC32-1184-01

t l identity manager - ibmpublib.boulder.ibm.com/tividd/td/itim/sc32-1184-01/... · ® identity...

Documents