self-adhesive membranes · apply the material from top downward by gradual removing the protective...

WWW.TN-EUROPE.COMKNOWLEDGE. EXPERIENCE. CRAFTSMANSHIP.

SELF-ADHESIVE MEMBRANES

VAPORSTOP CA 500 (TECHNOELAST VB 500 SELF)

ULTRAFLEX SA NBS

ULTRAFLEX SA | ULTRAFLEX SA NB

MIDA SELF SA 1.5 mm STRONG P | MIDA SELF SA 1.5 mm STRONG G


TN-INTERNATIONAL 2

Long operational lifetime, reliability and convenience of installation —

that’s the ideal waterproofing. Any defect, especially when it comes to

foundations, will certainly lead to destruction of the entire system and

huge financial losses to the customer.

Application of self-adhesive materials make possible to install reliable

waterproofing where the standard torch-on application is forbidden,

and high flexibility and elasticity allow the materials to be used on

surfaces of any complexity and in limited space.

APPLICATION AREA:

Waterproofing of underground (below-grade) parts of premises and

engineering structures;

Indoor waterproofing of premises and buildings;

Waterproofing of confined space, where standard technologies

cannot be applied (bathroom floor). Can be used in parquetry and

floor installation;

As an underlay on pitched roofs and as a vapor barrier on the

corrugated steel sheets and precast concrete slabs;

Corrosion protection of steel pipes and junctions.

ADVANTAGES:

APPLICATION ON

SURFACES, WHERE

TORCH-ON APPLICATION

IS PROHIBITED

SIMPLE

INSTALLATION

APPLICATION ON

SURFACES OF ANY

COMPLEXITY

DOES NOT REQUIRE

EXTRA EQUIPMENT

COLD APPLICATION

PREVENTS SMOKE,

ODOURS AND NOISE

QUICK

INSTALLATION

Self-adhesive waterproofing is a type of materials, that combines all the

advantages of torch-on applied materials and non-torch-on installation, which

helps to avoid issues associated with the use of flame.


TN-INTERNATIONAL 3

Vapor barrier with aluminum foil intended to use as a reliable vapor-

proofing layer in roofing constructions on a corrugated steel decking.

Self-adhesive bottom surface and high tensile strength ensure the

ability of the material to withstand the weight of the person standing

between the corrugations of the profiled metal deck without breaking

or stretching.

Intended use:

Material is used as a vapor barriers in construction of public and

industrial buildings with normal temperature and humidity conditions

(malls, warehouse complexes, sport centers etc.).


PROPERTIES VAPORSTOP CA 500

Weight, kg/m2 0.5±0.10

Thickness, mm 0.5±0.10

Flexibility / Flow resistance, °С ≤ -25 / ≥ 90

Tensile strength, N/50 mm 600 / 600±120

Reinforcement type fiberglass mesh

Protective covering type: upper /bottom aluminum foil / protective film

Width х length, m 50 × 1.08

ADVANTAGES:

High workforce productivity —

few installation steps

Easier to install an ideal vapor

barrier

Vapor permeability Sd=1000

Mechanically stable – withstand

the weight of the person


TN-INTERNATIONAL 4

SOLUTION EXAMPLES:


TN-INTERNATIONAL 5

METHOD OF APPLICATION:

Cut the siliconized anti-adhesion

film at the distance of 30-40 cm

from the beginning of the roll by

means of roofing knife.

1

Remove the protective film from the

edge of the roll and attach the

membrane to the surface.

2

Press the place of the first adhesion

by roller for the whole width of the

membrane.

3

Continue attaching the membrane to

the base. One worker pulls the film

off, while the other smooths the

membrane by brush.

4

Convenience, simplicity and safety of installation of the membrane are due to the special adhesive polymer-bitumen layer, which allows installation of the material

without additional equipment.


TN-INTERNATIONAL 6

Used for indoor waterproofing with the direct installation of ceramic

tiles onto the material without the need of protective sand cement

screed. Can be used on bases, where the standard torch-on

application is forbidden (wood, XPS, etc.)

MATERIAL STRUCTURE:

1. Polypropylene (Spunbond)

Protects waterproofing layer from mechanical damage. Provides

strong sticking to the tile adhesive.

2. Self-adhesive polymer-bitumen compound

High elasticity index of this layer allows installation of waterproofing

on surfaces of any complicated shape

3. Easy-removable protective film

Used for underside surface protection from sticking in the roll.

ULTRAFLEX SA NBS

PROPERTIES ULTRAFLEX SA NBS




Tensile strength, N/50 mm NPD

Reinforcement type -

Protective covering type: upper /bottom Spunbond / protective film

Width х length, m 20 × 1

ADVANTAGES:

Material is installed in one layer

unlike cement based waterproofing,

which requires several layers.

No need to wait for the screed to dry

Tile is installed directly on the

material.

ULTRAFLEX SA NBS

TN-INTERNATIONAL 7

SOLUTION EXAMPLES:


TN-INTERNATIONAL 8

Self-adhesive polyester reinforced SBS-modified bitumen membrane

ULTRAFLEX SA is designed to complete secure application. It is used

as an underlay on pitched roofs and as a vapor barrier.

Could also be used for waterproofing of foundations and engineering

structures Non-skid upper layer from fine-grained sand provide safe

movement on the roof during installation.

MATERIAL STRUCTURE:

1. PE film or sand

Protects waterproofing layer from mechanical damage and

prevents adhesion of the material in the roll.

2. Polymer-bitumen compound

Provides reliable waterproofing

3. Polyester

Provides excellent elongation and grants optimal strength to the

material.


Self-adhesive layer allows to install the material on combustible

surfaces.



ULTRAFLEX SA

PROPERTIES ULTRAFLEX SA




Tensile strength, N/50 mm ≥ 90

Reinforcement type polyester

Protective covering type: upper /bottom film or sand / protective film


ADVANTAGES:

Self-adhesive

Simple and quick installation

High speed of application

Dimensional stability

Safety at work

ULTRAFLEX SA

TN-INTERNATIONAL 9

SOLUTION EXAMPLES:


TN-INTERNATIONAL 10

Self-adhesive carrier less SBS-modified bitumen membrane

ULTRAFLEX SA NB is designed for waterproofing of foundations and

engineering structures, indoor waterproofing. Thanks to the special

adhesive bitumen compound, the material can be used on surfaces,

where the standard torch-on application is forbidden (expanded /

extruded polystyrene or wooden base). The absence of a carrier is a

key feature of this material that makes it very elastic and flexible.

MATERIAL STRUCTURE:

1. Thick PE film for mechanical protection

Protects waterproofing layer from mechanical damage and impacts

of chemically aggressive media


High elasticity of this layer preserves waterproofing undamaged

when cracks and splits occur in the foundation



ULTRAFLEX SA NB

PROPERTIES ULTRAFLEX SA NB




Tensile strength, N/50 mm NPD

Reinforcement type -

Protective covering type: upper /bottom thick film / protective film


ADVANTAGES:

Self-adhesive



High elasticity

ULTRAFLEX SA NB

TN-INTERNATIONAL 11

SOLUTION EXAMPLES:


TN-INTERNATIONAL 12

Self-adhesive polyester / glass fiber reinforced SBS-modified bitumen

membrane MIDA SELF SA 1.5 mm STRONG is designed for

waterproofing of foundations and engineering structures.

On the top side, the material is covered with a special thick PE film

that grants additional tensile properties and elongation. The other side

of the material is covered with a removable protective film.

MATERIAL STRUCTURE:

1. Thick PE film for mechanical protection

Protects waterproofing layer from mechanical damage and impacts

of chemically aggressive media

2. Polymer-bitumen compound

Provides reliable waterproofing

3. Polyester (P) / Glass fiber (G)

Reinforced carrier makes the material stable to tension and

deformation.


High speed of materials application without any additional

equipment and skills.



MIDA SELF SA 1.5 mm STRONG

PROPERTIES P G




Tensile strength, N/50 mm 400 / 300±100 350 / 200±100

Reinforcement type polyester glass fiber

Protective covering type: upper /bottom thick film / protective film


ADVANTAGES:

Self-adhesive



Dimensional stability

MIDA SELF SA 1.5 mm STRONG

TN-INTERNATIONAL 13

SOLUTION EXAMPLES:

METHOD OF APPLICATION

TN-INTERNATIONAL 14

FLAT ROOF OR INDOOR WATERPROOFING

Clean and treat the surface with

bitumen primer.

1

Fit and straighten the membrane to

the area of application.

2

Re-roll the membrane to the center,

pre-cut the protective film.

3

Remove the protective film and

smooth the membrane.

4


TN-INTERNATIONAL 15

FLAT ROOF OR INDOOR WATERPROOFING

Longitudinal overlaps – 80-100 mm.

End overlaps – 150 mm.

Overlaps to be glued with bitumen

mastic of 1 mm thickness.

5

On a vertical surface the material to

be placed on a height, sufficient

according to the thickness of the

floor and decoration.

6 ! Self-adhesive materials to be installed at the temperaturesabove +10 °С.

! Surface must be smooth, dry, clean and with no oil stains.


TN-INTERNATIONAL 16

FOUNDATION WATERPROOFING

Surface must be smooth, dry, clean

and with no oil stains. For better

adhesion, treat the surface with

primer.

1

Measure the depth of the

foundation and cut the material to

the required length.

2

Apply the material from top

downward by gradual removing the

protective film, unrolling the

membrane and smoothing it to the

surface.

3

The material to be installed to the

height of 30-50 cm above the

ground level. Longitudinal overlaps

should be 100 mm, sheet end

overlaps - 150 mm.

4


TN-INTERNATIONAL 17

FOUNDATION WATERPROOFING

The top end of the waterproofing

membrane to be fixed at basement

level by profiled metal edge strip and

sealed.

5

Protect the membrane from

mechanical damage by means of

thermal insulation or protective

slabs.

!

As a layer protection from mechanical

impacts PLANTER profiled HDPE

membrane is recommended.

!

WWW.TN-EUROPE.COM

THANK YOU FOR ATTENTION!

Name

Position

self-adhesive membranes · apply the material from top downward by gradual removing the protective...

Documents