Reference

Reference

192

55.. RREEFFEERREENNCCEE

Abd El Rehim, S. S., Ibrahim, M. A., & Khalid, K. F. (2001). The inhibition of 4-(2′-amino-5′-

methylphenylazo) antipyrine on corrosion of mild steel in HCl solution. Materials Chemistry & Physics,

70(3), 268-273.

Abd El Rehim, S. S., Sayyah, S. M., El-Deeb, M. M., Kamal, S. M., & Azooz, R. E. (2010). Poly (o-

phenylenediamine) as an inhibitor of mild steel corrosion in HCl solution. Materials Chemistry &

Physics, 123(1), 20-27.

Abdallah, M. (2004). Guar gum as corrosion inhibitor for carbon steel in sulfuric acid solutions.

Portugaliae Electrochimica Acta, 22(2), 161-175.

Abdallah, M., Megahed, H. E., El-Etre, A. Y., Obied, M. A., & Mabrouk, E. M. (2004). Polyamide

compounds as inhibitors for corrosion of aluminum in oxalic acid solutions. Bulletin of Electrochemistry,

20(6), 277-281.

Abed, Y., Arrar, Z., Hammouti, B., Taleb, M., Kertit, S. & Mansri, A. (2001b). Poly(4-vinylpyridine) and

poly(4-vinylpyridine polyethylene glycol) as corrosion inhibitors for Cu60-Zn40 in 0.5M HNO3. Anti-

Corrosion Methods & Materials, 48(5), 304-308.

Abed, Y., Hammouti, B., Touhami, F., Aouniti, A., Kertit, S., Mansri, A. & Elkacemi, K. (2001a). Poly(4-

vinylpyridine) (P4VP) as corrosion inhibitors of armco iron in molar sulfuric acid solution. Bulletin of

Electrochemistry, 17(3), 105-110.

Achary, G., Naik, Y. A., Kumar, S. V., Venkatesha, T. V., & Sherigara, B. S. (2008). An electroactive co-

polymer as corrosion inhibitor for steel in sulphuric acid medium. Applied Surface Science, 254(17),

5569-5573.

Agrawal, S. L., & Awadhia, A. (2004). DSC and conductivity studies on PVA based proton conducting

gel electrolytes. Bulletin of Materials Science, 27(6), 523-527.

Akbarzadeh, E., Ibrahim, M. M., & Rahim, A. A. (2011). Corrosion inhibition of mild steel in near neutral

solution by kraft and soda lignins extracted from oil palm empty fruit bunch. International Journal of

Electrochemical Science, 6(11), 5396-5416.

Al Juhaiman, L. A., Mustafa, A. A., & Mekhamer, W. K. (2012). Polyvinyl Pyrrolidone as a Green

Corrosion Inhibitor of Carbon Steel in Neutral Solutions Containing NaCl: Electrochemical and

Thermodynamic Study. International Journal Electrochemical Science, 7(9), 8578-8596.

Ali Fathima Sabirneeza, A., & Subhashini, S. (2013). A novel water‐soluble, conducting polymer

composite for mild steel acid corrosion inhibition. Journal of Applied Polymer Science, 127(4), 3084-

3092.

Ali Fathima Sabirneeza, A., Subhashini, S., & Rajalakshmi, R. (2013). Water soluble conducting

polymer composite of polyvinyl alcohol and leucine: An effective acid corrosion inhibitor for mild steel.

Materials & Corrosion, 64(1), 74-82.

Ali, S. A., & Saeed, M. T. (2001). Synthesis and corrosion inhibition study of some 1,6-hexanediamine-

based N,N-diallyl quaternary ammonium salts and their polymers. Polymer, 42(7), 2785-2794.

Ali, S. A., Saeed, M. T., & El‐Sharif, A. M. (2012). Diallyl‐1, 12‐diamino dodecane‐based cyclopolymers

and their use as inhibitors for mild steel corrosion. Polymer Engineering & Science, 52(12), 2588-2596.

Reference

193

Al-Sabagh, A. M., Elsabee, M., Elazabawy, O. E., & Amira, E. E. (2010). Corrosion inhibition efficiency

of polytriethanolamine surfactants for pipe-lines carbon steel in 1M HCl, Journal of Dispersion Science

& Technology, 31(10), 1288–1297.

Aly, K. I., & Hussein, M. A. (2010). New polymer syntheses, part 45: Corrosion inhibition behavior of

novel polyurea derivatives based on diarylidenecycloalkanone moieties in the polymers backbone.

Journal of Polymer Research, 17(5), 607-620.

Aly, K. I., Abbady, M. A., Mahgoub, S. A., & Hussein, M. A. (2009a). New polymer syntheses, Part 44:

Synthesis, characterization, and corrosion inhibition behavior of new polyurea derivatives based on

diaryl ether in the polymers backbone. Journal of Applied Polymer Science, 112(2), 620-628.

Aly, K. I., Wahdan, M. H., & Hussein, M. A. (2009b). New polymer syntheses, Part 43: Novel

polyamides‐based diarylidenecyclopentanone: Synthesis, characterization, and corrosion inhibition

behavior. Journal of Applied Polymer Science, 112(1), 513-523.

Amin, M. A., Abd EI-Rehim, S.S., El-Sherbini, E. E. F., Hazzazi, O. A., & Abbas, M. N. (2009). Poly

acrylic acid as a corrosion inhibitor for aluminium in weakly alkaline solutions. Part I: Weight loss,

polarization, impedance EFM and EDX studies. Corrosion Science, 51(3), 658–667.

Amin, M. A., Abd El-Rehim, S. S., El-Sherbini, E. E. F., & Bayoumi, R. S. (2008). Chemical and

electrochemical (AC and DC) studies on the corrosion inhibition of low carbon steel in 1.0 M HCl

solution by succinic acid-temperature effect, activation energies and thermodynamics of adsorption.

International Journal of Electrochemical Sciences, 3(2), 199-215.

Amira, W. E., Rahim, A. A., Osman, H., Awang, K., & Raja, P. B. (2011). Corrosion inhibition of mild

steel in 1 M HCl solution by Xylopia ferruginea leaves from different extract and partitions. International

Journal of Electrochemical Science, 6(7), 2998-3016.

Aramaki, K., Hagiwara, M., & Nishihara, H. (1987). Adsorption and corrosion inhibition effect of anions

plus an organic cation on iron in 1M HClO4 and the HSAB principle. Journal of the Electrochemical

Society, 134(8), 1896-1901.

Arthur, D. E., Jonathan, A., Ameh, P. O., & Anya, C. (2013). A review on the assessment of polymeric

materials used as corrosion inhibitor of metals and alloys. International Journal of Industrial Chemistry,

4(1), 1-9.

Ashassi-Sorkhabi, H., Ghalebsaz-Jeddi, N., Hashemzadeh, F., & Jahani, H. (2006). Corrosion inhibition

of carbon steel in hydrochloric acid by some polyethylene glycols. Electrochimica Acta, 51(18), 3848–

3854.

Ashassi-Sorkhabi, H., Ghasemi, Z., & Seifzadeh, D. (2005a). The inhibition effect of some amino acids

towards the corrosion of aluminum in 1M HCl+ 1M H2SO4 solution. Applied Surface Science, 249(1),

408-418.

Ashassi-Sorkhabi, H., Majidi, M. R., & Seyyedi, K. (2004). Investigation of inhibition effect of some

amino acids against steel corrosion in HCl solution. Applied Surface Science, 225(1), 176-185.

Ashassi-Sorkhabi, H., Shaabani, B., & Seifzadeh, D. (2005b). Corrosion inhibition of mild steel by some

Schiff base compounds in hydrochloric acid. Applied Surface Science, 239(2), 154-164.

Aslan, E., Camuşcu, N., & Birgören, B. (2007). Design optimization of cutting parameters when turning

hardened AISI 4140 steel (63 HRC) with Al2O3 + TiCN mixed ceramic tool. Materials & design, 28(5),

1618-1622.

Reference

194

Assender, H. E., & Windle, A. H. (1998). Crystallinity in poly (vinyl alcohol). 1. An X-ray diffraction study

of atactic PVOH. Polymer, 39(18), 4295-4302.

Ateya, B. G., El-Anadouli, B. E., & El-Nizamy, F. M. (1984). The adsorption of thiourea on mild steel.

Corrosion Science, 24(6), 509-515.

Atta, A. M., El-Azabawy, O. E., Ismail, H. S., & Hegazy, M. A. (2011). Novel dispersed magnetite core-

shell nanogel polymers as corrosion inhibitors for carbon steel in acidic medium. Corrosion Science,

53(5), 1680-1689.

Babic-Samardzija, K., Lupu, C., Hackerman, N., Barron, A. R., & Luttge, A. (2005). Inhibitive properties

and surface morphology of a group of heterocyclic diazoles as inhibitors for acidic iron corrosion.

Langmuir, 21(26), 12187-12196.

Badawy, W. A., Ismail, K. M., & Fathi, A. M. (2006). Corrosion control of Cu–Ni alloys in neutral chloride

solutions by amino acids. Electrochimica Acta, 51(20), 4182-4189.

Bama, G. K., Devi, P. I., & Ramachandran, K. (2009). Structural and thermal properties of PVDF/PVA

blends. Journal of materials science, 44(5), 1302-1307.

Banumathi, N., Subhashini, S., & Rajalakshmi, R. (2010a). Polyethylene glycol aniline composite as

corrosion inhibitor for mild steel in acid medium. Journal of Ultra Chemistry, 6(2), 129-136.

Banumathi, N., Subhashini, S., & Rajalakshmi, R. (2010b). Polyethylene glycol-anthranilic acid

composite as corrosion inhibitor for mild steel in acid medium. Journal of Chemistry, 7(S1), S67-S74.

Barouni, K., Bazzi, L., Salghi, R., Mihit, M., Hammouti, B., Albourine, A., & El Issami, S. (2008). Some

amino acids as corrosion inhibitors for copper in nitric acid solution. Materials Letters, 62(19), 3325-

3327.

Belkaid, S., Tebbji, K., Mansri, A., Chetouani, A., & Hammouti, B. (2012). Poly (4-vinylpyridine-

hexadecyl bromide) as corrosion inhibitor for mild steel in acid chloride solution. Research on Chemical

Intermediates, 38(9), 2309-2325.

Benabdellah, M., Ousslim, A., Hammouti, B., Elidrissi, A., Aouniti, A., Dafali, A., Bekkouch, K. &

Benkaddour, M. (2007a). The effect of poly(vinyl caprolactone-co-vinyl pyridine) and poly(vinyl imidazol-

co-vinyl pyridine) on the corrosion of steel in H3PO4 media. Journal of Applied Electrochemistry, 37(7),

819-826.

Benabdellah, M., Touzani, R., Dafali, A., Hammouti, B., & El Kadiri, S. (2007b). Ruthenium–ligand

complex, an efficient inhibitor of steel corrosion in H2SO4 media. Materials Letters, 61(4), 1197-1204.

Benchikh, A., Aitout, R., Makhloufi, L., Benhaddad, L., & Saidani, B. (2009). Soluble conducting

poly(aniline-co-orthotoluidine) copolymer as corrosion inhibitor for carbon steel in 3% NaCl solution.

Desalination, 249(2), 466–474.

Bentiss, F., Lagrenee, M., Traisnel, M., & Hornez, J. C. (1999). Corrosion inhibition of mild steel in 1 M

hydrochloric acid by 2, 5-bis (2-aminophenyl)-1, 3, 4-oxadiazole. Corrosion, 55(10), 968-976.

Bentiss, F., Lebrini, M., & Lagrenée, M. (2005). Thermodynamic characterization of metal dissolution

and inhibitor adsorption processes in mild steel/2, 5-bis (n-thienyl)-1, 3, 4-thiadiazoles/hydrochloric acid

system. Corrosion Science, 47(12), 2915-2931.

Bentiss, F., Traisnel, M., Chaibi, N., Mernari, B., Vezin, H., & Lagrenée, M. (2002). 2, 5-Bis (n-

methoxyphenyl)-1, 3, 4-oxadiazoles used as corrosion inhibitors in acidic media: correlation between

inhibition efficiency and chemical structure. Corrosion science, 44(10), 2271-2289.

Reference

195

Bereket, G., Yurt, A. & Tuerk, H. (2003). Inhibition of the corrosion of low carbon steel in acidic solution

by selected poly electrolytes and polymers. Anti-Corrosion Methods & Materials, 50(6), 422-435.

Bhandari, H., Choudhary, V., & Dhawan, S. K. (2009b). Synergistic effect of copolymers composition on

the electrochemical, thermal, and electrical behavior of 5‐lithiosulphoisophthalic acid doped poly

(aniline‐co‐2‐isopropylaniline): synthesis, characterization, and applications. Polymers for Advanced

Technologies, 20(12), 1024-1034.

Bhandari, H., Choudhary, V., & Dhawan, S. K. (2011). Influence of self-doped poly (aniline-co-4-amino-

3-hydroxy-naphthalene-1-sulfonic acid) on corrosion inhibition behaviour of iron in acidic medium.

Synthetic Metals, 161(9), 753-762.

Bhandari, H., Sathiyanaranayan, S., Choudhary, V., & Dhawan, S. K. (2009a). Synthesis and

characterization of proccessible polyaniline derivatives for corrosion inhibition. Journal of Applied

Polymer Science, 111(5), 2328-2339.

Cecchetto, L., Delabouglise, D., & Petit, J. P. (2007). On the mechanism of the anodic protection of

aluminium alloy AA5182 by emeraldine base coatings: Evidences of a galvanic coupling. Electrochimica

Acta, 52(11), 3485-3492.

Chamovska, D., Cvetkovska, M., & Grchev, T. (2007). Corrosion inhibition of iron in hydrochloric acid by

poly acrylamide. Journal of the Serbian Chemical Society, 72(7), 687-698.

Chetouani, A., Medjahed, K., Sid-Lakhdar, K. E., Hammouti, B., Benkaddour, M., & Mansri, A. (2004).

Poly(4-vinylpyridine-poly(3-oxide-ethylene) tosyle) as an inhibitor for iron in sulphuric acid at 80oC.

Corrosion Science, 46(10), 2421–2430.

Chin, R. J., & Nobe, K. (1972). Electrodissolution kinetics of iron in chloride solutions III. Acidic

solutions. Journal of the Electrochemical Society, 119(11), 1457-1461.

Choi, D. J., You, S. J., & Kim, J. G. (2002). Development of an environmentally safe corrosion, scale,

and microorganism inhibitor for open recirculating cooling systems. Materials Science & Engineering: A,

335(1-2), 228–235.

Chowdhury, P., Ali, M. A., & Roy, K. (2007). Free radical graft polymerization of methyl methacrylate

from polyvinyl alcohol using FeCl₃/K₂S₂O₅ redox pair. Indian journal of chemistry, 46, 1414-1418.

Coates, J. (2000). Interpretation of infrared spectra, a practical approach. Encyclopedia of analytical

chemistry.

Dahmani, M., Et-Touhami, A., Al-Deyab, S. S., Hammouti, B., & Bouyanzer, A. (2010). Corrosion

inhibition of C38 steel in 1 M HCl: a comparative study of black pepper extract and its isolated piperine.

International Journal of Electrochemical Science, 5(8), 1060-1069.

Daouadji, M. M., & Chelali, N. (2004). Influence of molecular weight of poly(ortho-ethoxyaniline) on the

corrosion inhibition efficiency of mild steel in acidic media. Journal of Applied Polymer Science, 91(2),

1275-1281.

Darwish, N. A., Hilbert, F., Lorenz, W. J., & Rosswag, H. (1973). The influence of chloride ions on the

kinetics of iron dissolution. Electrochimica Acta, 18(6), 421-425.

Do Duong, D. (1998). Absorption Analysis: Equilibria and Kinetics (Vol. 2). Imperial College Pr.

Ebenso, E. E., Ekpe, U. J., Ita, B. I., Offiong, O. E., & Ibok, U. J. (1999). Effect of molecular structure on

the efficiency of amides and thiosemicarbazones used for corrosion inhibition of mild steel in

hydrochloric acid. Materials Chemistry & Physics, 60(1), 79-90.

Reference

196

Ebenso, E. E., Ekpe, U. J., Umoren, S. A., Jackson, E., Abiola, O. K., & Oforka, N. C. (2006).

Synergistic effect of halide ions on the corrosion inhibition of aluminum in acidic medium by some

polymers. Journal of Applied Polymer Science, 100(4), 2889-2894.

Ebenso, E. E., Ekpe, U. J., Umoren, S., Jackson, E., Abiola, O. K., & Oforka, N. C. (2005). Synergistic

effect of halide ions on the corrosion inhibition of aluminum by some polymers. Bulletin of

Electrochemistry, 21(10), 437-444.

Eddy, N. O., Ameh, P., Gimba, C. E., & Ebenso, E. E. (2011). GCMS studies On Anogessus leocarpus

(Al) gum and their corrosion inhibition potential for mild steel in 0.1 M HCl. International Journal of

Electrochemical Science, 6(11), 5815-5829.

Ein-Eli, Y. & Auinat, M. (2003). The behavior of zinc metal in alkaline solution containing organic

inhibitors. Journal of the Electrochemical Society, 150(12), A1606-A1613.

Elango, A., Umadevi, Paramasivam, M., & Periasamy, V. M. (2009). Polyaniline as a corrosion inhibitor

for commercial aluminum in alkaline solutions. Journal of Metallurgy & Materials Science, 51(2), 97-104.

El‐Awady, A. A., Abd‐El‐Nabey, B. A., & Aziz, S. G. (1992). Kinetic‐ thermodynamic and adsorption

isotherms analyses for the inhibition of the acid corrosion of steel by cyclic and open‐chain amines.

Journal of the Electrochemical Society, 139(8), 2149-2154.

El-Deeb, M. M., & Mohamed, S. M. (2011). Corrosion inhibition of aluminum with a 3-(10-sodium

sulfonate decyloxy) aniline monomeric surfactant and its analog polymer in a 0.5M hydrochloric acid

solution. Journal of Applied Polymer Science, 122(5), 3030-3037.

Elkadi, L., Mernari, B., Traisnel, M., Bentiss, F., & Lagrenee, M. (2000). The inhibition action of 3, 6-bis

(2-methoxyphenyl)-1, 2-dihydro-1, 2, 4, 5-tetrazine on the corrosion of mild steel in acidic media.

Corrosion Science, 42(4), 703-719.

El-Sherbini, E. F., Moussa, S. O., El-Rehim, S. A., & Hamed, E. (2007). Effect of some polymeric

materials on the corrosion behaviour of tin in succinic acid solution. Journal of Applied Electrochemistry,

37(5), 533-541.

Epelboin, I., & Keddam, M. (1972). Kinetics of formation of primary and secondary passivity in sulphuric

aqueous media. Electrochimica Acta, 17(2), 177-186.

Fanta, G. F. (1973). Synthesis of graft and block copolymers of starch. Block and graft

copolymerization, 1, 11.

Fekry, A. M., & Mohamed, R. R. (2010). Acetyl thiourea chitosan as an eco-friendly inhibitor for mild

steel in sulphuric acid medium. Electrochimica Acta, 55(6), 1933-1939.

Ferreira, E. S., Giacomelli, C., Giacomelli, F. C., & Spinelli, A. (2004). Evaluation of the inhibitor effect of

L-ascorbic acid on the corrosion of mild steel. Materials Chemistry & Physics, 83(1), 129-134.

Ferry M., Mohd Noor C.W., Gaspersz, F., Manuputty, M., Corrosion Performance of Mild Steel in

Seawater Inhibited By Allium CEPA. (2013). Journal of Engineering, Computers & Applied Sciences,

2(3), 24-30.

Finšgar, M., Fassbender, S., Hirth, S., & Milošev, I. (2009a). Electrochemical and XPS study of

polyethyleneimines of different molecular sizes as corrosion inhibitors for AISI 430 stainless steel in

near-neutral chloride media. Materials Chemistry & Physics, 116(1), 198-206.

Finšgar, M., Fassbender, S., Nicolini, F., & Milošev, I. (2009b). Polyethyleneimine as a corrosion

inhibitor for ASTM 420 stainless steel in near-neutral saline media. Corrosion Science, 51(3), 525-533.

Foroulis, Z. A. (1973). U.S. Patent No. 3,711,246. Washington, DC: U.S. Patent & Trademark Office.

Reference

197

Fouda, A. S., Heakal, F. E., & Radwan, M. S. (2009). Role of some thiadiazole derivatives as inhibitors

for the corrosion of C-steel in 1 M H2SO4. Journal of Applied Electrochemistry, 39(3), 391-402.

Fouda, A. S., Moussa, M. N., Taha, F. I., & Elneanaa, A. I. (1986). The role of some thiosemicarbazide

derivatives in the corrosion inhibition of aluminium in hydrochloric acid. Corrosion science, 26(9), 719-

726.

Fu, J., Li, S., Wang, Y., Cao. L., & Lu. L. (2010). Computational and electrochemical studies of some

amino acid compounds as corrosion inhibitors for mild steel in hydrochloric acid solution. Journal of

Material Science, 45(22), 6255-6265.

Gao, B., Cao, X., & Jiu, H. (2002). Quaternization of acrylamide/vinylpyridine copolymers and some

properties. Acta Polymerica Sinica, (4), 487-492.

Gao, B., Lv, Y., & Jiu, H. (2003). Synthesis and properties of cationic polyacrylamide containing pyridine

quaternary salt. Polymer International, 52(9), 1468-1473.

Gao, B., Zhang, X., & Sheng, Y. (2008). Studies on preparing and corrosion inhibition behaviour of

quaternized polyethyleneimine for low carbon steel in sulfuric acid. Materials Chemistry & Physics,

108(2), 375-381.

Garai, S., Jaisankar, P., Singh, J. K., & Elango, A. (2012). A comprehensive study on crude methanolic

extract of Artemisia pallens (Asteraceae) and its active component as effective corrosion inhibitors of

mild steel in acid solution. Corrosion Science, 60(0), 193-204.

Geethanjali, R., & Subhashini, S. (2013). Synthesis of magnetite-containing polyaniline-polyacrylamide

nanocomposite, characterization and corrosion inhibition behavior on mild steel in acid media. Chemical

Science Transactions, doi:10.7598/cst2013.513

Gomez, H., Ram, M. K., Alvi, F., Stefanakos, E., & Kumar, A. (2010). Novel synthesis, characterization,

and corrosion inhibition properties of nanodiamond-polyaniline films. Journal of Physical Chemistry C,

114(44), 18797-18804.

Gomma, G. K., & Wahdan, M. H. (1995). Schiff bases as corrosion inhibitors for aluminium in

hydrochloric acid solution. Materials Chemistry & Physics, 39(3), 209-213.

Gönder, Z. B., Kaya, Y., Vergili, I., & Barlas, H. (2010). Optimization of filtration conditions for CIP

wastewater treatment by nanofiltration process using Taguchi approach. Separation and Purification

Technology, 70(3), 265-273.

Granese, S. L., Rosales, B. M., Oviedo, C., & Zerbino, J. O. (1992). The inhibition action of heterocyclic

nitrogen organic compounds on Fe and steel in HCl media. Corrosion science, 33(9), 1439-1453.

Guerrouani, N., Couturaud, B., Mas, A., Schué, F., & Robin, J. J. (2013). Environment-friendly synthesis

of amphiphilic polyester-graft-poly (vinyl alcohol). European Polymer Journal. 49(6), 1621-1633.

Hanb, T., & Liua, J. (2010). Facile synthesis of palmitic acid polyacrylamide and its application for steel

protection from corrosion using electrochemical determination. Procedia Engineering, 7, 404–409.

Hariharaputhran, R., Subramanian, A., Antony, A. A., Sankar, P. M., Gopalan, A., Vasudevan, T., &

Iyer, S. V. (1998). Influence of substituent groups on performance of N-benzylidine phenylamine-N-

oxide as corrosion inhibitor of mild steel in acidic solutions. British Corrosion Journal, 33(3), 214-218.

Hassan, H. H., Abdelghani, E., & Amin, M. A. (2007). Inhibition of mild steel corrosion in hydrochloric

acid solution by triazole derivatives: Part I. Polarization and EIS studies. Electrochimica acta, 52(22),

6359-6366.

Reference

198

Hayes, S., & Kinlen, P. J. (2011). U.S. Patent No. 7,935,181. Washington, DC: U.S. Patent and

Trademark Office.

Hazzazi, O. A. (2006). On the corrosion inhibition of aluminium bicarbonate buffer solutions part I:

weight loss, polarization and EDX studies. Journal of Saudi Chemical Society, 10(2), 421-428.

Hussin, M. H., & Kassim, M. J. (2011). The corrosion inhibition and adsorption behavior of Uncaria

gambir extract on mild steel in 1M HCl. Materials Chemistry and Physics, 125(3), 461-468.

Idowu, P. A. P., & Isaac, F. O. S. (2011). Environmental failure of 2m acid strength on zinc electroplated

mild steel in the presence of Nicotioana Tobacum. International Journal of Electrochemical Science,

6(10), 4798-4810.

Ita, B. I., & Offiong, O. E. (2001). The study of the inhibitory properties of benzoin, benzil, benzoin-(4-

phenylthiosemicarbazone) and benzil-(4-phenylthiosemicarbazone) on the corrosion of mild steel in

hydrochloric acid. Materials Chemistry & Physics, 70(3), 330-335.

Jevremović, I., Debeljković, A., Singer, M., Achour, M., Nešić, S., & Mišković-Stanković, V. (2012). A

mixture of dicyclohexylamine and oleylamine as a corrosion inhibitor for mild steel in NaCl solution

saturated with CO2 under both continual immersion and top of the line corrosion. Journal of the Serbian

Chemical Society, 77(8), 1047-1061.

Jeyaprabha, C., Sathiyanarayanan, S., & Venkatachari, G. (2006a). Polyaniline as corrosion inhibitor for

iron in acidic solution. Journal of Applied Polymer Science, 101(4), 2144–2153.

Jeyaprabha, C., Sathiyanarayanan, S., Phani, K. L. N. & Venkatachari, G. (2005b). Influence of

poly(aminoquinone) on corrosion inhibition of iron in acid media. Applied Surface Science, 252(4), 966–

975.

Jeyaprabha, C., Sathiyanarayanan, S., Phani, K. L. N., & Venkatachari, G. (2005a). Investigation of the

inhibitive effect of poly(diphenylamine) on corrosion of iron in 0.5M H2SO4 solutions. Journal of

Electroanalytical Chemistry, 585(2), 250-255.

Jeyaprabha, C., Sathiyanarayanan, S., Venkatachari, G. (2006b). Effect of cerium ions on corrosion

inhibition of PANI for iron in 0.5M H2SO4. Applied Surface Science, 253(2), 432-438.

Jianguo, Y., Lin, W., Otieno-Alego, V., & Schweinsberg, D. P. (1995). Polyvinylpyrrolidone and

polyethylenimine as inhibitors for the corrosion of a low carbon steel in phosphoric acid. Corrosion

science, 37(6), 975-985.

Jüttner, K. (1990). Electrochemical impedance spectroscopy (EIS) of corrosion processes on

inhomogeneous surfaces. Electrochimica Acta, 35(10), 1501-1508.

Karthikaiselvi, R. & Subhashini, S. (2012a). The water soluble composite poly(vinylpyrrolidone–

methylaniline): A new class of corrosion inhibitors of mild steel in hydrochloric acid media. Arabian

Journal of Chemistry, doi.org/10.1016/j.arabjc.2012.10.024.

Karthikaiselvi, R., & Subhashini, S. (2012b). Study of adsorption properties and inhibition of mild steel

corrosion in hydrochloric acid media by water soluble composite poly (vinyl alcohol-o-methoxy aniline).

Journal of the Association of Arab Universities for Basic & Applied Sciences,

doi.org/10.1016/j.jaubas.2013.06.002.

Karthikaiselvi, R., & Subhashini, S. (2013). Myristica frangans: A green corrosion inhibitor for mild steel

in boiler scale removal. International Journal of Research in Chemistry and Environment, 3(3), 62-69.

Reference

199

Karthikaiselvi, R., Subhashini, S., & Rajalakshmi, R. (2010). Corrosion inhibition of mild steel by water

soluble poly (vinyl pyrrolidone – aniline) in 1M HCl. International Journal of Chemistry & Applications,

2(1), 69-78.

Karthikaiselvi, R., Subhashini, S., & Rajalakshmi, R. (2011). Poly (vinyl alcohol – aniline) water soluble

composite as corrosion inhibitor for mild steel in 1 M HCl. Arabian Journal of Chemistry, 5(4), 517-522.

Kavitha, A. L., Vasudevan, T., & Gurumallesh Prabu, H. (2011). Evaluation of synthesized antiscalants

for cooling water system application. Desalination, 268(1-3), 38–45.

Keleş, H., Keleş, M., Dehri, I., & Serindağ, O. (2008). Adsorption and inhibitive properties of

aminobiphenyl and its Schiff base on mild steel corrosion in 0.5 M HCl medium. Colloids & Surfaces A:

Physicochemical & Engineering Aspects, 320(1), 138-145.

Khairou, K. S., & El-Sayed, A. (2003). Inhibition effect of some polymers on the corrosion of cadmium in

a hydrochloric acid solution. Journal of Applied Polymer Science, 88(4), 866-871.

Khairou, K. S., & Zaafarany, I. (2006). Some sulfated water soluble natural polymer (carrageenans)

compounds as corrosion inhibitors for dissolution of iron in hydrochloride acid solution. Material Science

Research India, 3(2a), 135-140.

Khairou, K. S., Alfi, A. A., & Mabrouk, E. M. (2007). Natural polymers as corrosion inhibitors for

aluminium and tin in acidic media. Material Science Research India, 4(2), 279-290.

Khaled, K. F. (2003). The inhibition of benzimidazole derivatives on corrosion of iron in 1 M HCl

solutions. Electrochimica Acta, 48(17), 2493-2503.

Khaled, M. M. (2010). The effect of molecular weight on the corrosion protection properties of

polyvinylpyrrolidone polymers on stainless steel. Arabian Journal for Science & Engineering, Section A:

Sciences, 35(1), 29-39.

Khan, M. I., Chaudhry, A. U., Hashim, S., Zahoor, M. K., & Iqbal, M. Z. (2010). Recent developments in

intrinsically conductive polymer coatings for corrosion protection. Chemical Engineering Research

Bulletin, 14(2), 73-86.

Khandpur, N., & Singh, G. (2005). Conducting polymers as corrosion inhibitors. Indian Surface

Finishing, 2(1), 118-126.

Khandpur, N., Kim, H., Bhrara, K., & Singh, G. (2007). Inhibition of mild steel corrosion in sulfuric acid

by poly vinyl pyrrolidone-iodine complex. Indian Surface Finishing, 4(1), 28-35.

Khramov, A. N., Voevodin, N. N., Balbyshev, V. N., & Mantz, R. A. (2005). Sol–gel-derived corrosion-

protective coatings with controllable release of incorporated organic corrosion inhibitors. Thin Solid

Films, 483(1), 191-196.

Kim, D. K., Muralidharan, S., Ha, T. H., Bae, J. H., Ha, Y. C., Lee, H. G., & Scantlebury, J. D. (2006).

Electrochemical studies on the alternating current corrosion of mild steel under cathodic protection

condition in marine environments. Electrochimica Acta, 51(25), 5259-5267.

Kim, Y. W., Kim, J. G., & Choi, D. J. (2001). Development of a blended corrosion, scale, and

microorganism inhibitor for open recirculating cooling systems. Materials & Corrosion, 52(9), 697-704.

Koehan, F. L., Dixon, B. G., & Cole, D. E. (1999). New low toxicity, multi-metal active vapor phase

corrosion inhibitors. CORROSION, NACE International, San Antonio, Tx. 99, ID- 99495.

Kuznetsov, Y. I. (2012). New possibilities of metal corrosion inhibition by organic heterocyclic

compounds. International Journal of Corrosion & Scale Inhibition, 1(1), 3-15.

Reference

200

Lagrenee, M., Mernari, B., Bouanis, M., Traisnel, M., & Bentiss, F. (2002). Study of the mechanism and

inhibiting efficiency of 3, 5-bis (4-methylthiophenyl)-4H-1, 2, 4-triazole on mild steel corrosion in acidic

media. Corrosion Science, 44(3), 573-588.

Laidler, K. J. (1963). Reaction Kinetics, Vol. 1, Homogeneous gas reactions (pp. Ch-2). Oxford:

Pergamon Press.

Lebrini, M., Bentiss, F., Chihib, N. E., Jama, C., Hornez, J. P., & Lagrenée, M. (2008). Polyphosphate

derivatives of guanidine and urea copolymer: Inhibiting corrosion effect of Armco iron in acid solution

and antibacterial activity. Corrosion Science, 50(10), 2914-2918.

Lebrini, M., Lagrene´e, M., Vezin, H., Traisnel, M. & Bentiss, F. (2007). Experimental and theoretical

study for corrosion inhibition of mild steel in normal hydrochloric acid solution by some new macrocyclic

polyether compounds. Corrosion Science, 49(5), 2254–2269.

Li, W. H., He, Q., Zhang, S. T., Pei, C. L., & Hou, B. R. (2008). Some new triazole derivatives as

inhibitors for mild steel corrosion in acidic medium. Journal of Applied Electrochemistry, 38(3), 289-295.

Li, X., & Mu, G. (2005). Tween-40 as corrosion inhibitor for cold rolled steel in sulphuric acid: weight

loss study, electrochemical characterization, and AFM. Applied Surface Science, 252(5), 1254-1265.

Li, Y. J., Wu, B., Zeng, X. P., Liu, Y. F., Ni, Y. M., Zhou, G. D., & Ge, H. H. (2002). The voltammetry–

photocurrent response study of passivation of carbon steel in slightly alkaline solutions containing the

corrosion inhibitor phosphor-polymaleic acid–ZnSO4. Thin solid films, 405(1), 153-161.

Li, Y., Zhao, P., Liang, Q., & Hou, B. (2005). Berberine as a natural source inhibitor for mild steel in 1M

H2SO4. Applied Surface Science, 252(5), 1245-1253.

Lorenz, W. J., & Mansfeld, F. (1981). Determination of corrosion rates by electrochemical DC and AC

methods. Corrosion Science, 21(9), 647-672.

Machnikova, E., Whitmire, K. H., & Hackerman, N. (2008). Corrosion inhibition of carbon steel in

hydrochloric acid by furan derivatives. Electrochimica Acta, 53(20), 6024-6032.

Manickavagam, R., Jaya Karthik, K., Paramasivam, M., & Venkatakrishn Iyer, S. (2002). Poly (styrene

sulphonic acid)-doped polyaniline as an inhibitor for the corrosion of mild steel in hydrochloric acid. Anti

Corrosion Methods & Materials, 49(1), 19-26.

Manimaran, N., Rajendran. S., Manivannan, M., & Mary. S. (2012). Corrosion Inhibition of Carbon Steel

by Polyacrylamide. Research Journal of Chemical Sciences, 2(3), 52-57.

Manivel, P., & Venkatachari, G. (2006). The inhibitive effect of para-amino benzoic acid and its polymer

on corrosion of iron in 1 mol/L HCl solution. Journal of Materials Science & Technology, 22(3), 301-305.

Manivel, P., & Venkatachari, G. (2007). The inhibitive effect of poly(p-toluidine) on corrosion of iron in

1M HCl solutions. Journal of Applied Polymer Science, 104(4), 2595-2601.

Manivel, P., Sathiyanarayanan, S., & Venkatachari, G. (2007). Influence of H+ and Cl

- ions on inhibitive

performance of poly(aniline) for iron corrosion in acid. Journal of Applied Polymer Science, 106(6),

3988-3993.

Mansfeld, F. (1990). Electrochemical impedance spectroscopy (EIS) as a new tool for investigating

methods of corrosion protection. Electrochimica Acta, 35(10), 1533-1544.

Mansfeld, F. (Ed.). (1987). Corrosion mechanisms (Vol. 28). CRC Press.

Mansfeld, F., & Inman, R. V. (1979). A Versatile, Inexpensive Potentiostat for Corrosion Studies.

Corrosion, 35(1), 21-23.

Reference

201

Mansfeld, F., Kendig, M. W., & Lorenz, W. J. (1985). Corrosion inhibition in neutral, aerated media.

Journal of the Electrochemical Society, 132(2), 290-296.

Mansfeld, F., Kendig, M. W., & Tsai, S. (1982). Recording and analysis of AC impedance data for

corrosion studies. Corrosion, 38(11), 570-580.

Martinez, S., & Metikoš-Huković, M. (2003). A nonlinear kinetic model introduced for the corrosion

inhibitive properties of some organic inhibitors. Journal of Applied Electrochemistry, 33(12), 1137-1142.

Mayanna, S. M., & Setty, T. H. V. (1975). Effect of Benzotriazole on the dissolution of copper single

crystal planes in dilute sulphuric acid. Corrosion Science, 15(6), 627-637.

McCafferty, E., & Hackerman, N. (1972a). Double layer capacitance of iron and corrosion inhibition with

polymethylene diamines. Journal of the Electrochemical Society, 119(2), 146-154.

McCafferty, E., & Hackerman, N. (1972b). Kinetics of iron corrosion in concentrated acidic chloride

solutions. Journal of the Electrochemical Society, 119(8), 999-1009.

Meena, B. V., Anthony, N., Mangayarkarasi, K., Jayaram, P., & Rajendran, S. (2000). Kinetics of

Corrosion of Carbon Steel in the Presence of CMC. Proceedings of Tenth National Congress on

Corrosion Control, NCCI, & CECRI Karaikudi, 241–247.

Metikoš-Huković, M., Babić, R., & Grubač, Z. (2002). The study of aluminium corrosion in acidic solution

with nontoxic inhibitors. Journal of Applied Electrochemistry, 32(1), 35-41.

Migahed, M. A., Aly, R. O., & Al-Sabagh, A. M. (2004). Impact of gamma-ray pre-irradiation on the

efficiency of corrosion inhibition of some novel polymeric surfactants. Corrosion Science, 46(10), 2503-

2516.

Morad, M. S. (2000). An electrochemical study on the inhibiting action of some organic phosphonium

compounds on the corrosion of mild steel in aerated acid solutions. Corrosion science, 42(8), 1307-

1326.

Moretti, G., Quartarone, G., Tassan, A., & Zlngales, A. (1996). 5-Amino-and 5-chloro-indole as mild

steel corrosion inhibitors in 1 N sulphuric acid. Electrochimica Acta, 41(13), 1971-1980.

Mu, G., Li, X., & Liu, G. (2005). Synergistic inhibition between Tween 60 and NaCl on the corrosion of

cold rolled steel in 0.5 M sulfuric acid. Corrosion science, 47(8), 1932-1952.

Muhamath, B. M. A., & Kulanthai, K. (2009). Inhibition Effect of Parthenium Hystophrous L extracts on

the corrosion of mild steel in sulphuric acid. Journal of Applied Sciences & Environmental Management,

13(1), 27-36.

Müller, B. (2002). Adsorption and corrosion inhibition of aluminium by polymers. Adhaesion-Kleben &

Dichten, 46(6), 34-38.

Müller, B., & Imblo, G. (1996). Styrene copolymers with carboxyl groups as corrosion inhibitors for zinc

pigments in aqueous alkaline media. Journal of applied polymer science, 59(1), 57-62.

Müller, B., & Triantafillidis, D. (2001). Polymeric corrosion inhibitors for copper and brass pigments.

Journal of Applied Polymer Science, 80(3), 475-483.

Müller, B., Paulus, A., Lettmann, B., & Poth, U. (1998). Amphiphilic maleic acid copolymers as corrosion

inhibitors for aluminum pigment. Journal of Applied Polymer Science, 69(11), 2169–2174.

Muralidharan, S., Quraishi, M. A., & Iyer, S. V. K. (1995). The effect of molecular structure on hydrogen

permeation and the corrosion inhibition of mild steel in acidic solutions. Corrosion Science, 37(11),

1739-1750.

Reference

202

Negm, N. A., & Zaki, M. F. (2008). Corrosion inhibition efficiency of nonionic Schiff base amphiphiles of

p-aminobenzoic acid for aluminum in 4N HCl. Colloids & Surfaces A: Physicochemical & Engineering

Aspects, 322(1), 97-102.

Negm, N. A., & Zaki, M. F. (2009). Synthesis and characterization of some amino acid derived Schiff

bases bearing nonionic species as corrosion inhibitors for carbon steel in 2N HCl. Journal of Dispersion

Science & Technology, 30(5), 649-655.

Nik, W. W., Sulaiman, O., Giap, S. E., & Rosliza, R. (2010). Evaluation of inhibitive action of sodium

benzoate on corrosion behaviour of AA6063 in seawater. International Journal of Technology, 1, 20‐28.

Noor, E. A., & Al-Moubaraki, A. H. (2008). Thermodynamic study of metal corrosion and inhibitor

adsorption processes in mild steel/1-methyl-4 [4′(-X)-styryl pyridinium iodides/hydrochloric acid systems.

Materials Chemistry & Physics, 110(1), 145-154.

Obot, I. B., & Obi-Egbedi, N. O. (2010). 2, 3-Diphenylbenzoquinoxaline: a new corrosion inhibitor for

mild steel in sulphuric acid. Corrosion Science, 52(1), 282-285.

Obot, I. B., Obi-Egbedi, N. O., & Umoren, S. A. (2009). Adsorption characteristics and corrosion

inhibitive properties of clotrimazole for aluminium corrosion in hydrochloric acid. International Journal of

Electrochemical Science, 4(6), 863-877.

Öğretir, C., Mihci, B., & Bereket, G. (1999). Quantum chemical studies of some pyridine derivatives as

corrosion inhibitors. Journal of Molecular Structure: THEOCHEM, 488(1), 223-231.

Oguzie, E. E. (2006). Studies on the inhibitive effect of Occimum viridis extract on the acid corrosion of

mild steel. Materials Chemistry & Physics, 99(2), 441-446.

Oguzie, E. E. (2008). Corrosion inhibitive effect and adsorption behaviour of Hibiscus sabdariffa extract

on mild steel in acidic media. Portugaliae Electrochimica Acta, 26(3), 303-314.

Okafor, P. C., Ikpi, M. E., Uwah, I. E., Ebenso, E. E., Ekpe, U. J., & Umoren, S. A. (2008). Inhibitory

action of i Phyllanthus amarus. extracts on the corrosion of mild steel in acidic media. Corrosion

Science, 50(8), 2310-2317.

Olusegun, A. K., Oforka, N. C., & Ebenso, E. E. (2004). The inhibition of mild steel corrosion in an acidic

medium by the juice of Citrus paradisi (Grapefruit). The Journal of Corrosion Science & Engineering,

8(5), 1-10.

Othman, N., azahari, N. A., & ismail, H. (2011). Thermal Properties of Polyvinyl Alcohol (PVOH)/Corn

Starch Blend Film. Malaysian Polymer Journal, 6(6), 147-154.

Oyaizu, K., Yamaguchi, A., Hayashi, T., Nakamura, Y., Yoshii, D., Ito, Y., & Yuasa, M. (2006).

Controlled oxidation of dextran for evolution of polyether segment bearing pendant carboxyl groups for

corrosion inhibition applications. Polymer Journal, 38(4), 343-348.

Özcan, M., Karadağ, F., & Dehri, I. (2008). Interfacial behavior of cysteine between mild steel and

sulfuric acid as corrosion inhibitor. Acta Physico-Chimica Sinica, 24(8), 1387-1392.

Pal, K., Banthia, A. K., & Majumdar, D. K. (2007). Biomedical evaluation of polyvinyl alcohol–gelatin

esterified hydrogel for wound dressing. Journal of Materials Science: Materials in Medicine, 18(9), 1889-

1894.

Patachia, S., Savin, G., Luca, C., & Beldie, C. (2001). On the electrochemical corrosion inhibition. II.

Effect of the polyvinylimidazole and some of its derivatives. Analele Stiintifice ale Universitatii "Al. I.

Cuza" din Iasi, Chimi, 9, 219-224.

Reference

203

Poongothai, N., Rajendran, P., Natesan, M., & Palaniswamy, N. (2005). Wood bark oils as vapour

phase corrosion inhibitors for metals in NaCl and SO2 environments. Indian Journal of Chemical

Technology, 12(6), 641.

Prakash, S., Rao, C. R., & Vijayan, M. (2008). New polyaniline (PAni)-polyelectrolyte (PDDMAC)

composites: Synthesis and applications. Electrochimica Acta, 53(18), 5704-5710.

Praveen, B. M., Venkatesha, T. V., Arthoba Naik, Y., & Prashantha, K., (2007). Corrosion studies of

carbon nanotubes–Zn composite coating. Surface & Coatings Technology, 201(12), 5836-5842.

Quaraishi, M. A., Shukla, S. K., & Ebenso, E. E. (2012). Ketorol: New and effective corrosion inhibitor

for mild steel in hydrochloric acid solution, International Journal of Electrochemical Science, 7(10),

9920–9932.

Quraishi, M. A., & Shukla, S. K. (2009). Poly(aniline-formaldehyde): A new and effective corrosion

inhibitor for mild steel in hydrochloric acid. Materials Chemistry & Physics, 113(2), 685–689.

Quraishi, M. A., Farooqi, I. H., & Saini, P. A. (1999). Investigation of some green compounds as

corrosion and scale inhibitors for cooling systems. Corrosion, 55(5), 493-497.

Raja, P. B., & Sethuraman, M. G. (2008). Natural products as corrosion inhibitor for metals in corrosive

media — A review. Materials Letters, 62(1), 113-116.

Rajalakshmi, R., Prithiba, A., & Leelavathi, S. (2012). An overview of emerging scenario in the frontiers

of eco-friendly corrosion inhibitors of plant origin for Mild Steel. Journal of Chemica Acta, 1(1), 6-13.

Rajan, K. P., Veena, N. R., Singh, P., & Nando, G. B. (2010). Optimization of processing parameters for

a polymer blend using Taguchi method. Yanbu Journal of Engineering and Science, 1, 59-67.

Rajendran, A. (2011). Isolation, characterization, pharmacological and corrosion inhibition studies of

flavonoids obtained from Nerium oleander and Tecoma stans. International Journal of PharmTech

Research, 3(2), 1005-1013.

Rajendran, S., Apparao, B. V. & Palaniswamy, N. (1998). Synergistic and antagonistic effects existing

among polyacrylamide, phenyl phosphonate and Zn2+

on the inhibition of corrosion of mild steel in a

neutral aqueous environment. Electrochimica Acta, 44(2-3), 533-537.

Rajendran, S., Sridevi, S. P., Anthony, N., Amalraj, A. J., & Sundaravadivelu, M. (2005). Corrosion

behaviour of carbon steel in polyvinyl alcohol. Anti-Corrosion Methods & Materials, 52(2), 102-107.

Ren, Y., Luo, Y., Zhang, K., Zhu, G., & Tan, X. (2008). Lignin terpolymer for corrosion inhibition of mild

steel in 10% hydrochloric acid medium. Corrosion Science, 50(11), 3147-3153.

Riggs Jr, O. L., & Hurd, R. M. (1967). Temperature coefficient of corrosion inhibition. Corrosion, 23(8),

252-260.

Robert, G. K., John, R. S., David, W. S., & Rudolph, G. B. (2003). Electrochemical Techniques in

Corrosion Science and Engineering. New York, Marcel Dekker, USA.

Ross, P. J. (1995). Taguchi techniques for quality engineering (2nd ed'95).

Şahin, M., Bilgic, S., & Yılmaz, H. (2002). The inhibition effects of some cyclic nitrogen compounds on

the corrosion of the steel in NaCl mediums. Applied Surface Science, 195(1), 1-7.

Saleh, R. M., & Shams El Din, A. M. (1972). Efficiency of organic acids and their anions in retarding the

dissolution of aluminium. Corrosion Science, 12(9), 689-697.

Şanlı, O., Ay, N., & Işıklan, N. (2007). Release characteristics of diclofenac sodium from poly (vinyl

alcohol)/sodium alginate and poly (vinyl alcohol)-grafted-poly (acrylamide)/sodium alginate blend beads.

European Journal of Pharmaceutics and Biopharmaceutics, 65(2), 204-214.

Reference

204

Sanyal, B. (1981). Organic compounds as corrosion inhibitors in different environments - A review.

Progress in Organic Coatings, 9(2), 165-236.

Saremi, M., Dehghanian, C., & Sabet, M. M. (2006). The effect of molybdate concentration and

hydrodynamic effect on mild steel corrosion inhibition in simulated cooling water. Corrosion Science,

48(6), 1404-1412.

Sathiyanarayanan, S., Balakrishnan, K., Dhawan, S. K., & Trivedi, D. C. (1994). Prevention of corrosion

of iron in acidic media using poly(o-methoxy-aniline). Corrosion science, 39(6), 831-837.

Sathiyanarayanan, S., Dhawan, S. K., Trivedi, D. C., & Balakrishnan, K. (1992). Soluble conducting poly

ethoxy aniline as an inhibitor for iron in HC1. Corrosion Science, 33(12), 1831-1841.

Sedahmed, G. H., Nagy, S. M., & El-Kholy, N. S. (1982). Effect of drag reducing polymers on the rate of

mass transfer in relation to their use as corrosion inhibitors in pipelines under turbulent flow conditions.

Journal of Applied Electrochemistry, 12(4), 479-485.

Sekine, I., Sanbongi, M., Hagiuda, H., Oshibe, T., Yuasa, M., Imahama, T., & Wake, T. (1992).

Corrosion inhibition of mild steel by cationic and anionic polymers in cooling water system. Journal of

the Electrochemical Society, 139(11), 3167-3173.

Shokry, H., Yuasa, M., Sekine, I., Issa, R. M., El-Baradie, H. Y., & Gomma, G. K. (1998). Corrosion

inhibition of mild steel by schiff base compounds in various aqueous solutions: part 1. Corrosion

science, 40(12), 2173-2186.

Shukla, J., & Pitre, K. S. (2005). Corrosion & inhibition kinetics of PVA polymer on carbon steel in

sulfuric acid solution. Indian Journal of Chemistry Section A: Inorganic, Physical, Theoretical &

Analytical Chemistry, 44(11), 2270-2273.

Shukla, J., Pitre, K. S., & Jain, P. (2003). Inhibitive effect of PEG on the corrosion of aluminium in acidic

medium. Indian Journal of Chemistry Section A: Inorganic, Physical, Theoretical, Analytical, Chemistry,

42(11), 2784-2787.

Shukla, S. K. & Ebenso, E. E. (2011). Corrosion inhibition, adsorption behavior and thermodynamic

properties of streptomycin on mild steel in hydrochloric acid medium, International Journal of

Electrochemical Science, 6(8), 3277–3291.

Shukla, S. K., & Quraishi, M. A. (2009). 4-Substituted anilinomethylpropionate: New and efficient

corrosion inhibitors for mild steel in hydrochloric acid solution. Corrosion Science, 51(9), 1990-1997.

Shukla, S. K., & Quraishi, M. A. (2012). Effect of Some Substituted Anilines-Formaldehyde Polymers on

Mild Steel Corrosion in Hydrochloric Acid Medium. Journal of Applied Polymer Science, 124(6), 5130–

5137.

Shukla, S. K., Quraishi, M. A. & Rajiv Prakash, (2008). A self doped conducting polymer ‗‗polyanthranilic

acid‖: An efficient corrosion inhibitor for mild steel in acidic solution. Corrosion Science, 50(10), 2867–

2872.

Singh, A. K., & Quraishi, M. A. (2011). Investigation of the effect of disulfiram on corrosion of mild steel

in hydrochloric acid solution. Corrosion Science, 53(4), 1288-1297.

Singh, A. K., Ebenso, E. E., & Quraishi, M. A. (2012). Adsorption behaviour of cefapirin on mild steel in

hydrochloric acid solution. International Journal of Electrochemical Science, 7(3), 2320.

Singh, A. K., Shukla, S. K., Singh, M., & Quraishi, M. A. (2011). Inhibitive effect of ceftazidime on

corrosion of mild steel in hydrochloric acid solution. Materials Chemistry & Physics, 129(1), 68-76.

Reference

205

Singh, A., Ahamad, I., Singh, V. K., & Quraishi, M. A. (2011). Inhibition effect of environmentally benign

Karanj (Pongamia pinnata) seed extract on corrosion of mild steel in hydrochloric acid solution. Journal

of Solid State Electrochemistry, 15(6), 1087-1097.

Singh, A., Singh, V. K., & Quraishi, M. A. (2010). Aqueous extract of kalmegh (Andrographis paniculata)

leaves as green inhibitor for mild steel in hydrochloric acid solution. International Journal of Corrosion,

2010, Article ID 275983, doi:10.1155/2010/275983

Singh, M. R., Bhrara, K., & Singh, G. (2008). The inhibitory effect of diethanolamine on corrosion of mild

steel in 0.5 M sulphuric acidic medium. Portugaliae Electrochimica Acta, 26(6), 479-492.

Solmaz, R., Kardaş, G., & Erbil, M. (2008). Adsorption and corrosion inhibitive properties of 2-amino-5-

mercapto-1, 3, 4-thiadiazole on mild steel in hydrochloric acid media. Colloids and Surfaces A:

Physicochemical and Engineering Aspects, 312(1), 7-17.

Solomon, M. M., Umoren, S. A., Udosoro, I. I., & Udoh, A. P. (2010). Inhibitive and adsorption behaviour

of carboxymethyl cellulose on mild steel corrosion in sulphuric acid solution. Corrosion Science, 52(4),

1317–1325.

Song, Z. L., Wang, H., Zhang, X., Wu, X. D., Li, J. Z., & Dai, D. (2009). Anticorrosion Behaviors of

Quaternary Polyethyleneimine in Acidic Environment. In Materials Science Forum, 610, 136-141.

Soror, T. K. (2004). New naturally occurring product extract as corrosion inhibitor for 316 stainless steel

in 5% HCl. Journal of Material Science & Technology, 20(4), 463–466.

Srikanth, A. P., Lavanya, A., Nanjundan, S., & Rajendran, N. (2006). Synthesis, characterization, and

corrosion protection properties of poly(N-(methacryloyloxymethyl) benzotriazole-co-methyl

methacrylate) on mild steel. Applied Surface Science, 253(4), 1810-1816.

Srimathi, M., Rajalakshmi, R., & Subhashini, S. (2011). Polyvinyl alcohol-anthranilic acid composite as

corrosion inhibitor for mild steel. Asian Journal of Chemistry, 23(1), 273-277.

Srivastava, V., Banerjee, S., & Singh, M. M. (2010). Inhibitive effect of polyacrylamide grafted with

fenugreek mucilage on corrosion of mild steel in 0.5 M H2SO4 at 35° C. Journal of Applied Polymer

Science, 116(2), 810-816.

Subasria, R., Shinoharaa, T., & Morib, K. (2005). Modified TiO2 coatings for cathodic protection

applications. Science & Technology of Advanced Material, 6(5), 501-507.

Subhashini, S., & Sabirneeza. A. A. (2011). Gravimetric and electrochemical investigation of water

soluble poly(vinyl alcohol- threonine) as corrosion inhibitor for mild steel. Proceedings of WCECS, San

Francisco, USA, Vol-II, 657-662.

Subhashini, S., Rajalakshmi, R., Prithiba, A., & Mathina, A. (2010). Corrosion mitigating effect of

Cyamopsis Tetragonaloba seed extract on mild steel in acid medium. Journal of Chemistry, 7(4), 1133-

1137.

Tager, A. A., & Tsilipotkina, M. V. (1978). The porous structure of polymers and the mechanism of

sorption. Russian Chemical Reviews, 47(1), 83-97.

Tan, Y. J., Bailey, S., & Kinsella, B. (1996). An investigation of the formation and destruction of

corrosion inhibitor films using electrochemical impedance spectroscopy (EIS). Corrosion Science, 38(9),

1545-1561.

Tang, C., Rohani, J. M., & Yajid, M. A. M. (2013). Characterization of green corrosion inhibitor using

Taguchi dynamic approach. International Journal of Electrochemical Science, 8(6), 7991-8004.

Reference

206

Tang, L., Li, X., Li, L., Mu, G., & Liu, G. (2006). Interfacial behavior of 4-(2-pyridylazo) resorcin between

steel and hydrochloric acid. Surface & Coatings Technology, 201(1), 384-388.

Thakore, I. M., Desai, S., Sarawade, B. D., & Devi, S. (2001). Studies on biodegradability, morphology

and thermo-mechanical properties of LDPE/modified starch blends. European Polymer Journal, 37(1),

151-160.

Touir, R., Cenoui, M., El Bakri, M., & Ebn Touhami, M. (2008). Sodium gluconate as corrosion and

scale inhibitor of ordinary steel in simulated cooling water. Corrosion Science, 50(6), 1530-1537.

Touir, R., Dkhireche, N., Ebn Touhami, M., Lakhrissi, M., Lakhrissi, B., & Sfaira, M. (2009). Corrosion

and scale processes and their inhibition in simulated cooling water systems by monosaccharides

derivatives: Part I: EIS study. Desalination, 249(3), 922-928.

Trasatti, S. (1971). Work function, electronegativity, and electrochemical behaviour of metals: II.

Potentials of zero charge and ―electrochemical‖ work functions. Journal of Electroanalytical Chemistry &

Interfacial Electrochemistry, 33(2), 351-378.

Tudorachi, N., & Lipsa, R. (2011). Poly (vinyl alcohol)‐g‐lactic acid copolymers and films with silver

nanoparticles. Journal of Applied Polymer Science, 122(2), 1109-1120.

Tudorachi, N., Cascaval, C. N., Rusu, M., & Pruteanu, M. (2000). Testing of polyvinyl alcohol and starch

mixtures as biodegradable polymeric materials. Polymer testing, 19(7), 785-799.

Uhlig, & Herbert H. (Herbert Henry) (1971). Corrosion and corrosion control: An introduction to

corrosion science and engineering (2nd edn). Wiley, New York.

Umoren, S. A. (2009a). Polymers as Corrosion Inhibitors for Metals in Different Media - A Review. Open

Corrosion Journal, 2, 175-188.

Umoren, S. A. (2009b). Corrosion inhibition of aluminum alloy 3SR in HCl by polyvinylpyrrolidone and

polyacrylamide: effect of molecular structure on inhibition efficiency. Surface Review & Letters, 16(6),

831-844.

Umoren, S. A. (2011). Synergistic inhibition effect of polyethylene glycol–polyvinyl pyrrolidone blends for

mild steel corrosion in sulphuric acid medium. Journal of Applied Polymer Science, 119(4), 2072–2084.

Umoren, S. A., Ebenso, E. E., & Ogbobe, O. (2009). Synergistic effect of halide ions and polyethylene

glycol on the corrosion inhibition of aluminium in alkaline medium. Journal of Applied Polymer Science,

113(6), 3533–3543.

Umoren, S. A., Ebenso, E. E., Okafor, P. C., & Ogbobe, O. (2006a). Water soluble polymers as

corrosion inhibitors. Pigment & Resin Technology, 35(6), 346-352.

Umoren, S. A., Ebenso, E. E., Okafor, P. C., Ekpe, U. J., & Ogbobe, O. (2007b). Effect of halide ions on

the corrosion inhibition of aluminium in alkaline medium using polyvinyl alcohol. Journal of Applied

Polymer Science, 103(5), 2810-2816.

Umoren, S. A., Li, Y., & Wang, F. H. (2010a). Electrochemical study of corrosion inhibition and

adsorption behaviour for pure iron by polyacrylamide in H2SO4: Synergistic effect of iodide ions.

Corrosion Science, 52(5), 1777–1786.

Umoren, S. A., Li, Y., & Wang, F. H. (2010b). Synergistic effect of iodide ion and polyacrylic acid on

corrosion inhibition of iron in H2SO4 investigated by electrochemical techniques. Corrosion Science,

52(7), 2422–2429

Reference

207

Umoren, S. A., Ogbobe, O., Ebenso, E. E., & Ekpe, U. J. (2006b). Effect of halide ions on the corrosion

inhibition of mild steel in acidic medium using polyvinyl alcohol. Pigment & resin technology, 35(5), 284-

292.

Umoren, S. A., Ogbobe, O., Igwe, I. O., & Ebenso, E. E. (2008). Inhibition of mild steel corrosion in

acidic medium using synthetic and naturally occurring polymers and synergistic halide additives.

Corrosion Science, 50(7), 1998–2006.

Umoren, S. A., Ogbobe, O., Okafor, P. C., & Ebenso, E. E. (2007a). Polyethylene glycol and polyvinyl

alcohol as corrosion inhibitors for aluminium in acidic medium. Journal of Applied Polymer Science,

105(6), 3363–3370.

Umoren, S. A., Solomon, M. M., Udosoro, I. I., & Udoh, A. P. (2010c). Synergistic and antagonistic

effects between halide ions and carboxymethyl cellulose for the corrosion inhibition of mild steel in

sulphuric acid solution. Cellulose, 17(3), 635–648.

Vakili Azghandi, M., Davoodi, A., Farzi, G. A., & Kosari, A. (2012). Water-base acrylic terpolymer as a

corrosion inhibitor for SAE1018 in simulated sour petroleum solution in stagnant and hydrodynamic

conditions. Corrosion Science, 64(0), 44–54.

Vatsala, S., Bansal, V., Tuli, D. K., Rai, M. M., Jain, S. K., Srivastava, S. P., & Bhatnagar, A. K. (1994).

Gas chromatographic determination of residual hydrazine and morpholine in boiler feed water and

steam condensates. Chromatographia, 38(7-8), 456-460.

Villamil, R. F., Corio, P., Agostinho, S. M., & Rubim, J. C. (1999). Effect of sodium dodecylsulfate on

copper corrosion in sulfuric acid media in the absence and presence of benzotriazole. Journal of

Electroanalytical Chemistry, 472(2), 112-119.

Wahyuningrum, D., Achmad, S., Syah, Y. M., & Buchari, B. B., and Ariwahjoedi, B. (2008). The

correlation between structure and corrosion inhibition activity of 4, 5-diphenyl-1-vinylimidazole derivative

compounds towards mild steel in 1% NaCl solution. International Journal of Electrochemical Science,

3(2), 154-166.

Wu, J., Wang, N., Wang, L., Dong, H., Zhao, Y., & Jiang, L. (2012). Unidirectional water-penetration

composite fibrous film via electrospinning. Soft Matter, 8(22), 5996-5999.

Xu, Y., Zhang, B., Zhao, L., & Cui, Y. (2013). Synthesis of polyaspartic acid/5-aminoorotic acid graft

copolymer and evaluation of its scale inhibition and corrosion inhibition performance. Desalination, 311,

156-161.

Yadav, A. K., & Singh, G. (2004). Corrosion inhibition by some organic polymers. Journal of the

Electrochemical Society of India, 53(4), 125-128.

Yang, W., & Liu, R. (2010). Effects of polymers on extending surface area for DC etched aluminum foil.

Cailiao Kexue Yu Gongcheng Xuebao, 28(3), 434-438.

Yurt, A., Bütün, V., & Duran, B. (2007). Effect of the molecular weight and structure of some novel

water-soluble triblock copolymers on the electrochemical behaviour of mild steel. Materials Chemistry &

Physics, 105(1), 114-121.

Zaafarany, I. (2006). Inhibition of acidic corrosion of iron by some carrageenan compounds. Current

World Environment, 1(2), 101-108.

Zarrok, H., Al-Deyab, S. S., Zarrouk, A., Salghi, R., Hammouti, B., Oudda, H., Bouachrine, M. &

Bentiss, F. (2012). Thermodynamic Characterisation and Density Functional Theory Investigation of 1,

Reference

208

1', 5, 5'-Tetramethyl-1H, 1'H-3, 3'-Bipyrazole as Corrosion Inhibitor of C38 Steel Corrosion in HCl.

International Journal of Electrochemical Science, 7(5).

Zarrouk, A., Hammouti, B., Zarrok, H., Al-Deyab, S. S., & Messali, M. (2011). Temperature effect,

activation energies and thermodynamic adsorption studies of l-cysteine methyl ester hydrochloride as

copper corrosion inhibitor in nitric acid 2M. International Journal of Electrochemical Science, 6(12),

6261-6274.

Zhang, X., Wu, X., & Gao, B. (2011). Studies of cationic property of quaternary polyethyleneimine.

Materials Science Forum: Materials Modeling, Simulation, & Characterization, 689, 432-439.

Zhao, P., Liang, Q., & Li, Y. (2005). Electrochemical, SEM/EDS and quantum chemical study of

phthalocyanines as corrosion inhibitors for mild steel in 1 mol/l HCl. Applied Surface Science, 252(5),

1596-1607.

Zidan, H. M. (2003). Electron spin resonance and ultraviolet spectral analysis of UV‐irradiated PVA films

filled with MnCl2 and CrF3. Journal of applied polymer science, 88(1), 104-111.

Zucchi, F., Brunoro, G., & Trabanelli, G. (1977). Corrosion and Inhibition Tests on copper‐base alloy

tubes in flowing conditions. Materials and Corrosion, 28(12), 834-837.