LibertyGT 1111B-MCRT2 Integrated, PXIe-Modular, COTS, Touchscreen, User Programmable, Multi-Function, Software Defined Synthetic, Benchtop Automated Test System (ATS) Optimized for Multi-Channel, Real-Time, Radio Test, Microwave, RF & Wireless Comms Stimulus, Test & Measurement (T&M)

Knowledge is good!

www.radxtech.com

Preliminary Product Overview Page 1 of 4

For More Info Visit www.radxtech.com or Email RADX Sales at info@radxtech.com Call +1 (619) 677-1849 x 1

Replace MULTIPLE “Boxed” T&M Instruments with ONE LibertyGT

Benchtop ATS to IMPROVE Throughput and REDUCE SWaP and TCO

LGT1111B-MCRT2 Supports Unique, Multi-Channel, Real-Time Vector Signal Generation and Vector Signal

Analysis for Comprehensive Multi-Channel Radio Test

The RADX® LibertyGT® 1111B-MCRT2 (LGT1111B-MCRT2) is the first COTS, PXIe-modular, real-time, multi-function, user programmable, open-architecture, integrated, touchscreen optimized, software defined, Automated Test System (ATS) that is specifically configured for high-performance, high dynamic-range Multi-Channel, Real-Time, Radio Test applications.

The LGT1111B combines National Instruments® (NI) PXIe modules with RADX LGT FPGA-accelerated Measurement Science Firmware and Software (MSFS) that employs a unique, real-time, modular, Software Defined Synthetic Instrument (SDSI®) architecture, an intuitive touchscreen interface and open-standard programmability. The LGT1111B includes a comprehensive suite of RF and microwave T&M instruments and Apps (Applications) that enable a single

LGT1111B to replace a dozen “boxed” T&M Instruments. Consequently, the LGT1111B significantly reduces ATS Size, Weight and Power (SWaP) and Total Cost of Ownership (TCO), while dramatically improving measurement throughput.

The LGT1111B features unique Apps for real-time, multi-channel radio testing:

LGT Multi-Channel (Channelized) Real-Time Vector Signal Analyzer (LGT MCRTVSA) combined with the system’s NI PXIe-5665 VSA PXIe Module, enables the LGT1111B-MCRT2 to support up to 128 concurrent, real-time, RF Measurement Channels, located within a 50 MHz span with up to 500 kHz of bandwidth per channel (up to the aggregate bandwidth of the NI PXIe-5665) with LGT standard demods including AM, FM, PM, BPSK, QPSK, QAM, FSK, PSK or ASK across a frequency range of 20 Hz to 3.6 GHz.

The LGT Multi-Channel Real-Time Vector Signal Generator (LGT MCRTVSG) combined with the system’s NI PXIe-5673E VSG PXIe module also supports concurrent transmission of up to 16 RF Stimulus Channels (with LGT standard modulation including AM, FM, PM, BPSK, QPSK, QAM, FSK, PSK or ASK), each with up to 500 kHz bandwidth per channel, located within a 100 MHz span across a frequency range of 85 MHz to 3.2 GHz.

With its unique modular hardware and software architecture, the LGT1111B-MCRT2 also supports “in-the-box” upgrades and tech insertion that adds additional T&M capabilities and substantially extend the system’s upper frequency range. RADX is a National Instruments Silver Alliance Partner with RF and Wireless Specialty Alliance Partner designation. The LGT1111B is a member of the LibertyGT Family-- developed in collaboration with NI and selected by Frost & Sullivan for a 2014 Global New Product Innovation Award.

LibertyGT 1111B-MCRT2 COTS, PXIe-Modular, Touchscreen, Programmable, Multi-Function, Software Defined Synthetic, Benchtop Automated Test System (ATS) Optimized for Multi-Channel, Real-Time, Radio Test Preliminary Product Overview (Cont’d) Page 2 of 4

For more info visit www.radxtech.com, email RADX Sales at info@radxtech.com or call +1 (619) 677-1849 x 1

LGT1111B-MCRT2 Key Features and Benefits

The LGT1111B sets a new standard for cost-effective, high-throughput, multifunction, parametric, real-time test of multi-channel commercial and military radios, avionics, wireless communications and other RF and microwave systems where the combination of programmability, flexibility, performance, throughput, long life cycle support and low TCO is essential.

Optimized for Multi-Channel Radio Testing– Channelized, Real-Time VSA App-- Simultaneously Receive

and Analyze up to 128 Independent RF Channels for Precision Transmitter Testing

– Channelized, Real-Time VSG App--Simultaneously Transmit Up to 16 Independent RF Channels for Precision Receiver Testing

– Industry Leading RF Specs and a Full Range of Analog & Digital Modulation & Demodulation Capabilities Included

Comprehensive RF & Microwave Measurement & Stimulus ATS Capability in a Single 5U System – LGT ATS Suite provides over a dozen SDSI-enabled LGT

Apps and Instruments to Provide Comprehensive RF & Microwave ATS Capability from a Single 5U System

– One LGT can replace multiple box instruments to dramatically reduce SWaP and maintenance costs (and TCO) while simultaneously improving measurement throughput

– RADX MSFS Bundles simplifies configurations and provides comprehensive T&M Capabilities at Value Prices

Real-Time, FPGA-accelerated, Concurrent MSFS Eliminates “Data Gaps” to Improve Results and Measurement Throughput – RADX' patented and patent-pending, real-time, Xilinx® FPGA-

accelerated MSFS eliminates data gaps for effective measurement and analysis of spectrally adaptive and frequency agile signals and transients

– Concurrent Processing enables multiple Apps to run in parallel to improve throughput and reduce unit test costs

Unique, Object Oriented, Modular Software Defined Synthetic Instrument (SDSI) Architecture – “Synthesizes” Multiple T&M Instruments and Apps on top

of a common suite of PXIe modules via an optimized RADX Hardware Abstraction Layer (HAL)

– Enables multi-function ATS capability that eliminates multiple “boxed instruments” to reduce SWaP, Maintenance Expense and TCO

– Isolates test programs from underlying hardware to enable replacement of End-of-Life (EOL) PXIe modules with NEW RADX qualified PXIe modules to significantly reduces costly Lifetime Buys and TPS maintenance costs

Intuitive & User Friendly State-of-the-Art, 1080p HD Touchscreen Optimized User Interface with Primary & Auxiliary Display Support for All Apps

Designed and Assembled in the USA LGT1111B Systems are designed and assembled in San Diego, CA where the city’s motto is “Semper Vigilans” (Ever Vigilant).

Modular, COTS, & Low-Risk – Modular, COTS PXIe Hardware Architecture based on NI

PXIe Modules and RADX PXIe Enclosure enables module-level (versus system level) repairs, spares, upgrades and tech insertion for improved MTTR and reduced TCO

– Patented and Patent-Pending Real-Time MSFS includes proven IP licensed exclusively to RADX from BAE Systems that is employed on the F-16 IAIS Program

– Rapid Station Calibration Combines Path Loss Alignment Procedure with Available NIST-Traceable NI Calibration Service for NI PXIe Modules or 3rd Party / User Calibration with NI Published Cal Procedures

– Includes MS Windows 7 Pro 64-bit, NI LabVIEW®, LabVIEW FPGA, and TestStand™ Binary Runtime Licenses and Software Foundation

– Includes RADX COTS, Patent-Pending, 18-Slot PXIe Benchtop LGTE Enclosure with Hinged Front Panel with 1080p Touchscreen Display and Front-to-Back Filtered Air Cooling -- optimized for flexibility and serviceability

Open Architecture, User Programmable – MS Win7 Based, Open API compatible with Python,

LabVIEW, TestStand, C, C++, C# and Java for all LGT Instruments & Apps enables cost effective User or 3rd party Test Program Set (TPS) development and re-use

– Unified Programming Model with Built-In Test Executive reduces programming complexity, time and costs when compared to programming multiple, disparate instruments

– Supports Local (GUI/Script) & Remote (VISA TCP/IP) Ops – Optional IVI Compliant Drivers for Traditional ATE Apps – Compatible with 3rd Party Win7 Compliant PXI/PXIe Apps – (Future) Windows Authentication and OpenSQL Server

for TPS, UUT and Other Data

LibertyGT 1111B-MCRT2 COTS, PXIe-Modular, Touchscreen, Programmable, Multi-Function, Software Defined Synthetic, Benchtop Automated Test System (ATS) Optimized for Multi-Channel, Real-Time, Radio Test Preliminary Product Overview (Cont’d) Page 3 of 4

For more info visit www.radxtech.com, email RADX Sales at info@radxtech.com or call +1 (619) 677-1849 x 1

LGT1111B-MCRT2 for Comprehensive Multi-Channel, Real-Time Radio Test and Precision Wireless Comms, RF & Microwave Stimulus, T&M The LGT1111B-MCRT2 is designed to provide comprehensive, multifunction support for multi-channel radio test and a wide range of wireless communications, RF and microwave stimulus, test and measurement applications— right out of the box. The LGT1111B-MCRT2 is available with the following standard and optional capabilities (subject to change and technology refreshment):

• LGT1111B Std. PXIe Enclosure – RADX Patent Pending LGTE-RF3 18-Slot, PXIe

Enclosure with 12 GB/sec Backplane – Integrated 1080p HD Touchscreen LCD Display

Mounted on Unique, Hinged Front Panel for Module Access and Serviceability

– Module and App-Compatible with NI PXIe-1085 – Modular, Autosensing, Int’l Power Supply: 100-

240VAC, 50-60Hz, 6-12A with 15A CB – Front-to-Back Filtered Air Cooling with Quick-

Change, Modular Fan Assemblies – Integrated Rack Mount Ears and Handles – Internal Connector Panel connects Front Panel

and User Definable Rear RF and Misc. I/O – Dimensions: 8.75” (222.3 mm) H x 19” (482.6

mm) W x 22.0” (558.8 mm) D – Fully Configured Operating Weight: 56 Pounds

(25.4 kg)

• LGT1111B Std. NI PXI/PXIe Modules – See www.ni.com for details – NI PXIe-8135 i7 Quad Core Embedded

Controller with Removable HDD – NI PXIe-5665 VSA

Frequency Range: 20 Hz to 3.6 GHz Phase Noise: -129 dBc/Hz at 10 kHz Offset

(800 MHz center frequency) Instantaneous Bandwidth: 50 MHz (3 dB) Average Noise Floor at 1 GHz: -165 dBm/Hz Amplitude Accuracy: ±0.1 dB (typical)

– NI PXIe-5673E VSG with List Mode Frequency Range: 85 MHz - 3.3 GHz Instantaneous Bandwidth: 100 MHz Phase Noise: -112 dBc/Hz at 10 kHz (1

GHz Center Frequency) RF Output Power Up to +10 dBm Fast and Deterministic Configuration

Changes with RF List Mode – NI PXIe-7975R FlexRIO FPGA Module (for Real-

Time DSP Functions and MSFS) – NI PXI-5160 2-Ch, 10-bit, 2.5 GSPS

DSO/Digitizer with 2 GB RAM and Probe Kit – NI PXI-4461 Dynamic Signal Analyzer (for Audio

Analyzer) – NI PXI-4065 DMM and Probe Kit – NI Calibration Certificates

• LGT1111B Std. I/O & UUT Interfaces I/O FEATURE I/O

PANEL RF Receiver Input Front RF Transmitter Output Front 2-CH Audio Frequency Input Front 2-CH Audio Frequency Output Front 2-CH DSO Input with Ext’l Triggering Front DMM Inputs Front Generic Analog I/Q Rear BER Digital Data I/O Front &

Rear Int’l 10 MHz Ref or Ext’l 10 MHz Ref Input with 10 MHz Ref Output

Rear

3 x USB 2.0/3.0, 2 x GigE, 1 x RS-232C

Front & Rear

1 x External 1080p HD Auxiliary Display Port

Rear

Flux Capacitor Time Dilation Option Rear

• LGT1111B-MCRT2 Multi-Channel MSFS Apps & Instruments – LGT1111B Multi-Channel, Channelized, Real-

Time Vector Signal Analyzer supports up to 128 RX CH with AM, FM, PM, BPSK/QPSK, FSK2-8, PSK2-8 & ASK2-8 demodulation

– LGT1111B Multi-Channel, Real-Time Vector Signal Generator supports up to 16 TX CH with AM, FM, PM, BPSK/QPSK, FSK2-8, PSK2-8 and ASK2-8 modulation

• LGT1111B-MCRT2 Std. MSFS Apps &

Instruments – LGT Single-Channel, Real-Time VSA App – LGT Spectrum Analyzer App – LGT RF Power Meter App – LGT RF Frequency Counter & Error Meter App – LGT 2-Ch Dig. Storage Oscilloscope (DSO) App – LGT Arbitrary Waveform Generator (AWG) App – LGT Digital Multi-Meter (DMM) – LGT 2-Channel Audio Analyzer App with Audio

Frequency Sig Gen, Digitizer, Frequency Counter and Error Meter, Level Meter, SINAD and THD+N Meters

– LGT Single-Channel Real-Time Demodulator: AM, FM, PM, SSB, BPSK, QPSK, OQPSK, MSK/GMSK, FSK2-32, PSK4-32, ASK2–32, QAM16–256

– LGT Single-Channel Modulation Analyzer: AM, FM, PM, SSB, BPSK, QPSK/OQPSK, MSK/GMSK, FSK 2-32, PSK4-32, ASK2–32, QAM16–256

– LGT Bit Error Rate (BER) Tester with Data Pattern Generator

– LGT Standard Single Channel Spectrum and Waveform Capture, Analysis and Playback

– LGT Integrated, Single-Channel Radio Tester including RF Receiver, Narrow Band Spectrum Analyzer, Modulation Analysis & Audio Analysis

• LGT MSFS Foundation – MS Windows 7 Pro 64-bit OS with (future) User

Authentication and Test Executive Functionality – NI LabVIEW, LabVIEW FPGA and TestStand (for

Alignment and PVT) Binary Licenses – LGT 64-bit, Object Oriented MSFS Framework

with HW Abstraction Layer & Concurrency Mgr. – LGT Ergonomic, 1080p HD Touchscreen User

Interface for all Apps with Configuration Specific Primary & Aux Display Support

– LGT Quick-Start Diagnostics (Built-In-Test) – LGT Open Architecture Application Programming

Interface (API) for All Apps, Instruments & Functions with Support for LabVIEW, TestStand, Python (Scripting), C, C++ and Java

– LGT Unit Under Test (UUT) Control App with Radio Test Emulator (RTE) UUT Example

– (Future) LGT Open Architecture SQL Database for Test Results, Cal Factors, TPS, etc.

– LGT VISA TCP/IP Remote Interface – LGT Std. and Configuration-Specific

Performance Verification Test (PVT) App – USB License Key, Software Media, Binary

Software License and Docs

• LGT1111B Std. Accessories Kit – 8 GB DDR-3 for NI PXIe-8135 – 500+ GB Primary Removable SSD for PXIe-8135 – USB3 Backup Archival HDD – USB Keyboard with Trackpad – Radio Test Emulator (RTE) System Software (for

Customer or Separately Purchased RTE) – Misc. Tools and Cables – Double Wall Shipping Container

• LGT1111B Std. Alignment Kit – NIST Traceable RF Power Meter – Alignment Cable Set and Tools

• LGT1111B Designed to Comply with Key Quality, Safety, EMI/EMC & Environmental Standards – Designed, Assembled & Tested in the USA by

RADX and Core Systems (ISO9001:2008) – Designed to Meet FCC A, CE, UL, IEC 60068-2-

1 & -2, MIL-PRF-28800F Class 3 including Class 3 Low Temp & Class 2 High Temp Limits

– Environmental and Standard Compliance Certification Available (Contact RADX for Details)

• LGT1111B Export Information – System: ECCN 5A992, LE NLR – MSFS & RTSA-1: ECCN 3D991, LE NLR – RTSA-2: ECCN 3D001, Export License Req’d

• LGT1111B Std. Warranty & Calibration – Hardware: 1 Year RTF Warranty – Software: 1 Year SW Maintenance – Extended Warranty Available – PXI/PXIe Module Level Cal Service Available

from RADX or NI – NI Module Cal Procedures available at

http://goo.gl/Hp16gE.

• Available LGT1111B Options (Contact RADX for Details) – LGTE-RF4 Enclosure with 24 GB/sec Backplane – LGT Precision 10 MHz +/- 50 PPB Reference

and Low Noise Distribution Amp – Data Encode/Decode Option – LGT Real-Time Spectrum Analyzer (RTSA-1) – LGT RTSA-2 (Export Controlled) – LGT Advanced Spectrum/Waveform Capture &

Playback App with PXIe RAID Support – Specific OFDM and other Mod/Demod Libraries – LGT IVI Compliant Remote I/F – LGT Radio Test Emulator System (Includes

Embedded PC, NI USRP 2920 SDR & Accessories (Software Sold Separately)

– LGT Advanced Arbitrary Waveform Generator App with NI PXIe-5442 AWG

– LGT IEEE-488 GPIB UUT Interface – LGT MIL-STD-1553B UUT Interface – LGT Legacy Radio Test Bundle with Radio Test

RFIU, Power Attenuator, Cable Ass’y & Switches – LGT 22”, 24” or 27” Aux Touchscreen Display – LGT1111B Tailored Pelican Transit Case – 10 Gigabit Ethernet Option – Customer Specific Models, Mods/Demods,

MSFS & TPS available

LibertyGT 1111B-MCRT2 COTS, PXIe-Modular, Touchscreen, Programmable, Multi-Function, Software Defined Synthetic, Benchtop Automated Test System (ATS) Optimized for Multi-Channel, Real-Time, Radio Test Preliminary Product Overview (Cont’d) Page 4 of 4

For more info, please visit www.radxtech.com, contact RADX Sales at info@radxtech.com or call +1 (619) 677-1849 x 1 RADX Technologies, Inc. • 15090 Avenue of Science, Suite 104 • San Diego, CA 92128 • +1 (619) 677-1849 x 1 • www.radxtech.com • info@radxtech.com

© Copyright 2017, RADX Technologies, Inc. All Rights Reserved. The LibertyGT Base MSFS contains technology licensed exclusively to RADX by BAE Systems that is protected by U.S. Patents 8514919, 8744025, 8717006 and 8164498 and other pending patents. RADX LGTE-RFE includes patent-pending RADX technology. RADX, the RADX logo, LibertyGT and SDSI are registered trademarks that are the property of RADX Technologies, Inc. All other trademarks are the property of their respective owners. RADX-LGT1111B-MCRT2-4P-OVU-2.8-28FEB17.

Information in this publication is subject to change without notice.

Real-Time MSFS, Intuitive Touchscreen GUI & Open Arch. APIs The LGT1111B features an extensive suite of tightly-integrated RADX Real-Time Measurement Science Firmware and Software (MSFS) that includes patented and patent-pending real-time SDSI technology exclusively licensed to RADX by BAE Systems®. The LGT1111B MSFS utilizes extensive real-time FPGA processing to eliminate measurement data gaps found in non-real-time signal analyzers and radio testers that affect measurement fidelity on multi-channel, spread spectrum and other advanced, digital and analog signals. LGT1111B MSFS Applications (Apps) feature intuitive graphical user interfaces optimized for the system’s HD 1080p touchscreen display. Every LGT1111B App and Instrument includes a comprehensive Application Programming Interface (API) that enables users to easily develop, share, and re-use Test Program Sets (TPS) using LabVIEW, TestStand, Python, C, C++ or Java that can automatically sequence hundreds of measurements and store the results for pass/fail and detailed diagnostics in the system’s Open Architecture SQL database. The combination of RADX real-time MSFS Apps with NI PXIe modules, LabVIEW and TestStand software enables the LGT1111B to deliver the most comprehensive and cost effective real-time, multi-channel radio test capability available in the market today.

LGTE-RF3 PXIe Enclosure: Patent-Pending, Touchscreen & Service-Optimized for Excellent MTTR The LGT1111B is deployed in the RADX LGTE-RF3 5U, 18-Slot, Touchscreen PXIe enclosure that features an integrated, 1080p HD touchscreen display mounted on the system’s unique hinged front panel which is optimized for module level field service, upgrades and technology insertion to significantly reduce MTTR and TCO. Designed by RADX and manufactured by Core Systems USA, the LGTE-RF3 features front-to-back, filtered air cooling, a modular, international power supply and fan assembly designed for quick MTTR, and an Internal Connector Panel (ICP) that enables convenient routing of RADX and User Defined analog and digital signals from the front to the rear of the enclosure for rack-mount, ATS applications. The LGTE-RF3 features a 12 GB/sec PXIe backplane. The LGTE-RF4, with a 24 GB/sec PXIe backplane, is available as an option for the LGT1111B. Both the LGTE-RF3 and LGTE-RF4 are 100% App and Module compatible with the NI PXIe-1085.

About RADX Technologies, Inc. (RADX) RADX is a DSP-focused small business that provides cost-effective, high-performance, COTS software, systems, solutions and services to end-users, OEMs and system integrators at multiple levels of integration. As a National Instruments Silver Alliance Partner with RF and Wireless Specialty Alliance Partner designation, RADX has a solid team of experts with decades of experience developing advanced, real-time FPGA, multi-core CPU, and GPU-based DSP solutions for consumer, commercial, aerospace and defense applications in Software Defined Synthetic Instrumentation (SDSI), Software Defined Radio (SDR) and Cognitive Radio (CR) markets.

The LGT1111B is a member of the LibertyGT Family-- developed in collaboration with NI and selected by Frost & Sullivan for a 2014 Global New Product Innovation Award.