presentation of the working group „grrf ece r55“ · 2009. 9. 16. · 21.09.2007 working group...

21.09.2007 working group on ECE R55 coupling devices

1

Presentation of the workinggroup „GRRF ECE R55“

Situation of september2007

Informal document No. GRRF-62-06(62nd GRRF, 25-28 September 2007,agenda item 5.)


2

Structure of the presentation:

• Summary of presentation to GRRF January2006

• Agreements of Working group „ECE R55“

• Remaining working items first of presentingthe proposal to GRRF

• Items initially excluded from the proposal


3

Summary of presentation to GRRF in January 2006


4


5


6

Proposal CARLOS TC:– Level-Crossing Histograms for Longitudinal-, Lateral-and Vertical Load


7

Agreements of the working groupIncluding last meeting in May 2007

The working group agreed on Load Intensity Values (LIV) related to D-values (see red lines on the next 3 pages)


8


9


10


11

Remaining working items first of presenting the proposal to GRRF

- Should the test be performed on rigid test bench or on vehicle or both permitted?

- How to distribute the test control data.- Is the phase-relationship of the test forces necessary?- What are the requirements on a test laboratory?- What are the failure criteria?


12

Should the test be performed on rigid test bench or on vehicle or both permitted?

The opinion of the working group in tendency is to just test on a rigid test bench, tests on vehicles should be allowed.


13

The forces to apply during the 3-dimension will build a load spectrum.

The working group still has to elaborate:How can the necessary test control data of

the load spectrum be published?

For example ASCII code on GRRF-website?


14

The working group still has to verify,

if in reality the phase-relationship of the forces in all 3 dimensions is important


15


16

In the case this supplement LIV directions / relations are validated to be necessary, the procedure must respect the phase-

relationship of the force-applications

in every direction.


17

What are the requirements on the test benches, the test bench control and on the documentation ?


18

Failure criteria (crack indication, funktion)as described in ECE R55.01 are not sufficient

Additional failure criteria (for exampleplay/clearance)

are to define by the working group!


19

Items initially excluded from theproposal

Following Considerations will not beincluded into relating amendment to ECE R55 for the first time, but in a later amendment with collected gaining experience


20

Application on Light duty trucks, Bicycle– and Load carriers

actually excluded from the proposal


21

Coupling devices made of other materials than steelas

Light Alloy or Composite



22

The verification ofMiss-use / overloads / impacts

additional forces caused by stabilizers and else



23

The working group will need more sessions as previewed,

a modified TOR will be presented to next GRRF


24

Thank You for attention

presentation of the working group „grrf ece r55“ · 2009. 9. 16. · 21.09.2007 working group...

Documents