plasma cut (3ph) - tramexfiles.tramex.nl/cea lasapparatuur_new/cea folders/cea plasma-cut-3ph.pdfbe...

PLASMA CUT (3PH) WWW.CEAWELD.COM INVERTER PLASMA CUTTING EQUIPMENT These powerful power sources, built according to the very latest INVERTER technology, represent the most efficient solution for the manual cutting of any metal and perforated lamination sheet. The electronic control , coupled with inverter precision and flexibility, allows to determine the most correct parameters to obtain high quality cutting in function of material and thickness. PLASMA CUT 150i, standard equipped with a display for digitally controlling all cutting parameters and automatically identifying the used torch, is suitable to be utilized for robotized applications by means of ROBOMAT 1 interface. ¼ ¼ Arc parameter electronic control for an excellent cutting quality ¼ ¼ Energy Saving function to activate the power source cooling fan only when necessary ¼ ¼ Cutting parameters stability within ±10% mains voltage fluctuations ¼ ¼ Long lasting consumable parts ¼ ¼ Metallic main structure with shockproof fibre compound front frame ¼ ¼ IP 23 protection class and dust-proof electronic components, thanks to the innovative “Tunnel” fan cooling system, allow their use in the toughest work environment ¼ ¼ Regulator group with built-in filter and air impurity automatic expulsion ¼ ¼ Easy to read and adjust sloping front control panel, highly visible from any direction ¼ ¼ Control panel protected against accidental impact ¼ ¼ Electrode wearing and improper operation signalling ¼ ¼ Safety protections on the torch to safeguard the operator ¼ ¼ Central connector for the torch ¼ ¼ Possibility of cutting grids and perforated lamination sheets ¼ ¼ Contact cutting possibility with currents below 50 A, without sliding blocks or other spacers

Upload: others

Post on 16-Oct-2020

5 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

PLASMA CUT (3PH)

WWW.CEAWELD.COM

INVERTER PLASMA CUTTING EQUIPMENT These powerful power sources, built according to the very latest INVERTER technology, represent the most efficient solution for the manual cutting of any metal and perforated lamination sheet. The electronic control , coupled with inverter precision and flexibility, allows to determine the most correct parameters to obtain high quality cutting in function of material and thickness. PLASMA CUT 150i, standard equipped with a display for digitally controlling all cutting parameters and automatically identifying the used torch, is suitable to be utilized for robotized applications by means of ROBOMAT 1 interface.

¼¼ Arc parameter electronic control for an excellent cutting quality

¼¼ Energy Saving function to activate the power source cooling fan only when necessary

¼¼ Cutting parameters stability within ±10% mains voltage fluctuations

¼¼ Long lasting consumable parts

¼¼ Metallic main structure with shockproof fibre compound front frame

¼¼ IP 23 protection class and dust-proof electronic components, thanks to the innovative “Tunnel” fan cooling system, allow their use in the toughest work environment

¼¼ Regulator group with built-in filter and air impurity automatic expulsion

¼¼ Easy to read and adjust sloping front control panel, highly visible from any direction

¼¼ Control panel protected against accidental impact

¼¼ Electrode wearing and improper operation signalling

¼¼ Safety protections on the torch to safeguard the operator

¼¼ Central connector for the torch

¼¼ Possibility of cutting grids and perforated lamination sheets

¼¼ Contact cutting possibility with currents below 50 A, without sliding blocks or other spacers