perancangan mengajar bmcg 1011a
DESCRIPTION
BMCGTRANSCRIPT
1
MAKMAL KEJURUTERAAN MEKANIKAL I
BMCG 1011SEMESTER 11SESI 2014/2015
1.0 LEARNING OUTCOMESAt the end of this course, students should be able to:
LO1 Observe discipline in attending laboratory sessions, applied safety precautions before, during and after conducting experiments in terms of following the experimental procedures and aware on the general experimental ethics.
LO2 Use basic mechanical engineering instruments to measure engineering variables pertinent to the conducted experiments.LO3Write well organized, sensible and readable technical reports which describe the experiment in a standard writing format. 2.0 SYNOPSISIntroduction to Science, Engineering and Technology. Introduction also to work safety. Application of Ethics in laboratory. Use of scientific method (mechanical measurement concept). Introduction to basic engineering measuring instruments to measure engineering variables. Preparing proper experimental report.
The experiments will be conducted in mechanical engineering laboratories that study the fundamental engineering concepts in statics, dynamics, material sciences, measurements and instrumentations as well as engineering drawing.3.0 REFERENCESa.Wheeler, A.J. and Ganji, A.R., 2010. Introduction to Engineering Experiment, 3rd Edition, International Edition, Pearson.b.Alan, S.M., 2001. Measurement and Instrumentation Principles, 1st Edition, Butterworth-Heinemann.
c. Holman, J.P. 2001. Experimental Methods for Engineers. 7th Ed., Mc Graw Hill.4.0 COURSE IMPLEMENTATIONSThe detail implementation of this course as below:
a. Briefing& Lab preparation2 hour per week for 3 weeks (Total = 6 hours)
b. Experiment
3 hours per week for 8 weeks (Total = 24 hours)
c. Report discussion and preparationFormal report:5 hours per week for 1 week
Informal report: 1 hour per week for 7 weeks
(Total = 12 hours)
5.0ATTENDANCE POLICY
Attendance is compulsory for all laboratory sessions including briefing and discussion sessions. 6.0 COURSE EVALUATIONSCRITERIAPERCENTAGE (%)
COURSE WORK
Direct ObservationLab session5
Report 7 Informal Report (Group) 1 Formal Report (Individual)
7025
TOTAL100
#Any report found to be of plagiarism in nature will be given minimum mark of 30%. 7.0 EXPERIMENT ACTIVITIES SCHEDULESWeekChapter / TopicContentsRemarks
1LAB BRIEFING/GROUPING
2LAB BRIEFING/GROUPING
3LAB SESSION 1Material Science/Statics/ Dynamics/Experimental Methods Informal Report
4LAB SESSION 2Material Science/Statics/ Dynamics/Experimental Methods
5LAB SESSION 3Material Science/Statics/ Dynamics/Experimental Methods
6LAB SESSION 4 Material Science/Statics/ Dynamics/Experimental Methods
7LAB SESSION 5Material Science/Statics/ Dynamics/Experimental Methods
SEMESTER BREAK
8LAB SESSION 6Material Science/Statics/ Dynamics/Experimental MethodsInformal Report
9LAB SESSION 7Material Science/Statics/ Dynamics/Experimental Methods
10FORMAL REPORT DISCUSSION
11LAB SESSION 8Material Science/Statics/ Dynamics/Experimental MethodsFormal Report
12
13
14
8.0 STAFFa. Coordinator:
Name: Hamzah Bin Mohd DomTel : 06-2346474Room : 8/6/8Email : [email protected]. Lecturer1BMCG2
S1 & S2S3 & S4
Name: Hamzah Bin Mohd DomTel : 06-2346747
Room : 8/5/36
Email : [email protected]
&Name: Mohamed Hafiz Bin Md. Isa
Tel : 06-2346660
Room: 8/6/57
Email: [email protected]
Name: Prof. Madya Ir. Dr. Abdul Talib bin Din Tel : Room :
Email : [email protected]&
Name: Dr. Musthafah bin Mohd TahirTel:
Room:
Email:[email protected]
S5 & S6S 7 & S8
Name: Hamzah Bin Mohd DomTel : 06-2346747
Room : 8/5/36
Email : [email protected]
&Name: Mohamed Hafiz Bin Md. Isa
Tel : 06-2346660
Room: 8/6/57
Email: [email protected]
Name: Pn. Ernie binti Mat TokitTel:
Room:
Email: [email protected]&
Name: Pn. Sushella Edayu binti Mat Kamal
Tel: 06-2346719
Room: 8/5/87
Email: [email protected]
C
c. Assistant EngineerMaterial Science LabName: En. Mahader bin Muhamad
Name: En. Mohd Hisham bin OndarTel: 06-2332517
Tel: 06-2332524
Email: [email protected]
Email: [email protected] LabName: En. Faizol bin Kamarul Zahari
Name: En. Mazlan bin TuminTel: 06-2332536
Tel: 06-2332534Email: [email protected]
Email: [email protected]: En. Johardi bin Abdul Jabar
Name: En. Azrul Syafiq bin MazlanTel: 06-2346860
Tel: 06-2346863
Email: [email protected]
Email: [email protected]: En. Mohd Rizal bin Roosli
Name: En. Mohd Shahrizan bin Dhahlan Tel: 06-2332524
Tel: 06-2346875Email: [email protected]
Email: [email protected] & Experimental Method LabName: Nurdiyana binti Samsudin
Name: En. Mohd Rizal bin RoosliTel: 062332539
Tel: 06-2332524Email: [email protected]
Email: [email protected] PERANCANGAN MENGAJARDisediakan oleh ;
Disahkan oleh ;
.
..
Nama : Hamzah Bin Mohd DomDekan/Timbalan Dekan(Akademik)/Ketua Jabatan
Jawatan : Pensyarah
Cop :
Cop :
Tarikh : _________________
Tarikh : __________________
PEMANTAUAN PELAKSANAAN PERANCANGAN MENGAJAR
(CUTI PERTENGAHAN SEMESTER)Ulasan/Komen :
Disemak oleh ;
..
Dekan/Timbalan Dekan(Akademik)/Ketua Jabatan
Cop :
Tarikh: _______________
PEMANTAUAN PELAKSANAAN PERANCANGAN MENGAJAR
(MINGGU KE-16 SEMESTER)Ulasan/Komen :
Disemak oleh ;
..
Dekan/Timbalan Dekan(Akademik)/Ketua JabatanCop :
Tarikh: _______________STUDENT LEARNING TIME (SLT)
No.Learning ActivitiesSLT (in hrs)
1Briefing and Discussion
(a) Briefing & Discussion (2 hrs x 3 week)6
2Laboratory
(a) Practical (3 hrs x 8 weeks)24
3Lab Report
(a) Formal (5hrs x 1 report)5
(b) Informal (Group) (1 hr x 7 reports)7
TOTAL SLT 42
Subject Credit ( Total SLT 40 )1.05
MATRIX OF LEARNING OUTCOMES (LO) VS FACULTY PROGRAMME OUTCOMES (PO)NOLEARNING OUTCOMEP01P02P03P04P05P06P07P08P09PO
10PO
11PO
12DELIVERYASSESSMENT
LO1Observe discipline in attending laboratory sessions, applied safety precautions before, during and after conducting experiments in terms of following the experimental procedures and aware on the general experimental ethics.
LO2Use basic mechanical engineering instruments to measure engineering variables pertinent to the conducted experiments.
LO3Write well organized, sensible and readable technical reports which describe the experiment in a standard writing format.
1 = Light
2 = Medium
3 = HeavyMATRIX LEARNING OUTCOMES VS SOFT SKILLSNOLEARNING OUTCOMECSCommunication SkillTS Team Work SkillLS Leadership Skill
CS 1CS2CS3CS 4CS5CS6CS 7TS 1TS 2TS 3TS 4TS 5LS 1LS 2LS 3LS 4
LO1Observe discipline in attending laboratory sessions, applied safety precautions before, during and after conducting experiments in terms of following the experimental procedures and aware on the general experimental ethics.
LO2Use basic mechanical engineering instruments to measure engineering variables pertinent to the conducted experiments.
LO3Write well organized, sensible and readable technical reports which describe the experiment in a standard writing format.
MATRIX LEARNING OUTCOMES VS TAXONOMYNOLEARNING OUTCOMECOGNITIVE DOMAINPSYCHOMOTOR DOMAINAFFECTIVE DOMAIN
KnowledgeComprehensionApplicationAnalysisSynthesisEvaluationPerceptionSetGuided ResponseMechanismComplex Overt ResponseAdaptationOriginationReceiving PhenomenaResponding to PhenomenaValuingOrganizationInternalizing Value
C1C2C3C4C5C6P1P2P3P4P5P6P7A1A2A3A4A5
LO1Observe discipline in attending laboratory sessions, applied safety precautions before, during and after conducting experiments in terms of following the experimental procedures and aware on the general experimental ethics.
LO2Use basic mechanical engineering instruments to measure engineering variables pertinent to the conducted experiments.
LO3Write well organized, sensible and readable technical reports which describe the experiment in a standard writing format.
PERANCANGAN MENGAJAR
UNIVERSITI TEKNIKAL MALAYSIA MELAKA
FAKULTI KEJURUTERAAN MEKANIKAL
Fakulti Kejuruteraan Mekanikal
Universiti Teknikal MalaysiaMelaka