PDT Engineering: ProE Tip #003

Download PDT Engineering: ProE Tip #003

Post on 17-Jun-2015

434 views

Category:

Design

0 download

Embed Size (px)

DESCRIPTION

PDTs ProE guy offers his Tip of the Week in an ongoing series for mechanical engineers.

TRANSCRIPT

  • 1. 1ProE Tip of the Week: ModelCHECK InteractiveUsing ModelCHECK Interactive to clean up your data Hockey Stick Assembly

2. Part / Assembly Step #1:Click Analysis > ModelCHECK > ModelCHECK Interactive 2 3. Part / Assembly Step #2:Select the level of detail you want ModelCheck Interactive to perform. For this example well use All Levels to check 3all of the parts in the main assembly. Only current assemblyAll sub-assemblies & parts Select certain component 4. Part / Assembly Step #3:The ModelCHECK will open a new screen with the results shown. You can cycle through the errors and highlight 4them on the part. Step 3.A: For example the ModelCHECK shows a buried feature in the shaft part. You can click highlight to show the issue on the part. (In this case there is a cut in free space)Step 3.B: You can then choose how you want to resolve theerror or if you want to ignore this in future ModelCHECKs 5. Drawing Step #1:Click Analysis > ModelCHECK > ModelCHECK Interactive 5 6. Drawing Step #2:The ModelCHECK will open a new screen with the results shown. You can cycle through the errors and highlight 6them on the drawing.Step 2.A: For example the ModelCHECK shows a spelling error in the title block. (Numbor Number) Step 2.B: You can then choose how you want to resolve the error or if you want to ignore this in future ModelCHECKs. In this case, you can correct the spelling error from this screen.