paramax 9000

Standard Specifications B- 2Construction Drawing B- 3Nomenclature B- 4Selection B- 6Service Factor SF B- 8Selection Tables and Dimension Tables Right Angle Shaft B- 11 Parallel Shaft B- 73

B Drive Unit

C Reducer

Standard Specifications C- 2Construction Drawing C- 3Nomenclature C- 4Selection C- 6Service Factor SF C- 8Selection Tables and Dimension Tables Right Angle Shaft C- 11 Parallel Shaft C-105

D Technical Data

Lubricant and Installation D- 2Painting Specifications and Rust Proof Standard D- 3Moment of Inertia D- 4Supplementary Dimension Drawing D- 12Supplementary Matters to Hollow Shaft D- 17Hollow Shaft Related Dimensions D- 18Cooling Fan Dimension D- 20Option Dimension D- 24Motor Terminal Box D- 32Motor Flange Dimension D- 34

AAvailable Combination Drive Units and Reducers Basic MotorIntroduction of Application

INDEX

Features

A - 2

Size Output Torque Size Output Torque Size Output Torque9015 2.6 9065 31.4 9110 1749025 4.2 9070 38.2 9115 2079030 6.4 9075 47.8 9118 2609035 8.5 9080 58.5 9121 3019040 10.1 9085 73.1 9126 3519045 13.2 9090 85.9 9128 4209050 15.3 9095 101 9131 4739055 19.9 9100 122 9136 5529060 24.4 9105 144

JUST FIT SIZE 26 sizes variation for most accurate economical selection.

NEW DESIGN CONCEPT Direct motor mount for right angle type also standardized.

Direct motor mount design of right angle typeis standardized.It have a number of outstanding features. 1. No input coupling 2. No coupling alignment required 3. Compact drive assembly

LARGER THERMAL CAPACITY Advanced thermal capacity by new designed fan cooling system. (Option)

New designed fan and conduct air cowling gain larger thermal capacity.This system benefit for severe situation like continuous operation, even if compact size.

Prepared full range 26 sizes variation.Fitness size selection available for every requested torque.Customer's wide design availability with most accurate economical selection.

Features

Maximum

Comparison when the thermal rating without fan is assumed to be 100%

87% higher thermal rating comparison with exist design

New design fanand hood

(PX9)

Exist design fanand hood

(PX8)

No fans

A - 3

LOW NOISE Low noise resulting from optimized gear tooth profile modificationand rigid housing design.

In comparison with ordinary pressure angle (20 deg),25 deg pressure angle permits a tooth from withthicker dedendum.This translates into higher tooth strength rating,an essential feature for shock load applications.

HIGH TOOTH STRENGTH 25 deg Pressure angle

FEM analysis used to maximize housing strength and rigidity, so maintaining correct gear alignment and bearing loading.

UNIVERSAL HOUSING Horizontal, vertical or upright mounting - All use the same housing.

FEM Analysis

25 deg Pressure Angle 20 deg Pressure Angle

Horizontal mounting Vertical mounting Upright mounting

Features

A - 4

AVAILABLE COMBINATION

Drive Unit: Right Angle

Reducer

Drive Unit: Parallel

Ratio 6.3 7.1 8 9 10 11.2 12.5 14 16 18 20 22.4 25 28 31.5 35.5 40 45 50 56 63 7160Hz 286 254 225 200 180 161 144 129 113 100 90 80 72 64 57 51 45 40 36 32 29 2550Hz 238 211 188 167 150 134 120 107 94 83 75 67 60 54 48 42 38 33 30 27 24 215.5x47.5x411x415x4

18.5x422x430x437x445x455x4

Ratio 6.3 7.1 8 9 10 11.2 12.5 14 16 18 20 22.4 25 28 31.5 35.5 40 45 50 56 63 7190159025903090359040904590509055906090659070907590809085909090959100910591109115911891219126912891319136

Ratio 6.3 7.1 8 9 10 11.2 12.5 14 16 18 20 22.4 25 28 31.5 35.5 40 45 50 56 63 7160Hz 286 254 225 200 180 161 144 129 113 100 90 80 72 64 57 51 45 40 36 32 29 2550Hz 238 211 188 167 150 134 120 107 94 83 75 67 60 54 48 42 38 33 30 27 24 215.5x47.5x411x415x4

18.5x422x430x437x445x455x475 x490 x4110 x4

(kW P)

O/P speedr/min

Motor

(kW P)

O/P speedr/min

Motor

Size

A - 5

Drive Unit: Right Angle

Drive Unit: Parallel

80 90 100 112 125 140 160 180 200 224 250 280 315 355 400 450 500 Ratio23 20 18 16 14 13 11 10 9.0 8.0 7.2 6.4 5.7 5.1 4.5 4.0 3.6 60Hz19 17 15 13 12 11 9.4 8.3 7.5 6.7 6.0 5.4 4.8 4.2 3.8 3.3 3.0 50Hz

5.5x47.5x411x415x4

18.5x422x430x437x445x455x4

80 9023 2019 17

80 90 100 112 125 140 160 180 200 224 250 280 315 355 400 450 500 Ratio90159025903090359040904590509055906090659070907590809085909090959100910591109115911891219126912891319136

Reducer: Parallel


Reducer: Right Angle

(kW P)

O/P speedr/min

Motor

Size

A - 6

Notes: 1. Motors with output kW specifications other than as listed in Tables 1-4 are also manufactured. Consult factory.

Examples: Special voltage, dust-proof, humidity-proof, tropical treatment, high temperature, ship use, dual shaft (round & square shaft), CSA standard, NEMA standard, etc. 2. When using an inverter drive, advice us of ambient temperature, input r/min, mounting method,

load characteristics and other conditions of use.


Table 1. 3-Phase Induction Motors (4 Pole).

Basic Motor

Table 2. 3-Phase Induction Motors with Built-in Brakes (4 Pole).

Capacity

kW

SpecificationsIndoorType

OutdoorType Class 2

Inslation Class Inverter Motors (Constant Torque)B F H Indoor Type Outdoor Type

5.57.51115

18.52230374555

RemarksContinuous Rating, 55kW and under,Applicable Voltage : 200V 50/60Hz(400V 50/60Hz,440V 60Hz,440V 60Hz)Provided that the base frequency for driving an inverter is 60 Hz.

Capacity

kW


OutdoorType Class 2

Inslation Class Inverter Motors (Constant Torque)B F H Indoor Type Outdoor Type

5.57.51115

18.5223037

Remarks

Continuous Rating,Applicable Voltage : 200V 50/60Hz , 220V 50/60Hz (400V 50/60Hz , 440V 60Hz)Provided that the base frequency for driving an inverter is 60 Hz.Brake Insulation : B type

: Standard Insulation: Manufacutured Models


Corrosion-proof

Corrosion-proof

A - 7


Table 3. Safety Increased Explosion-proof (eG3) 3-Phase Induction Motor (4 Pole).

Table 4. Pressure-tight Explosion-proof (d2G4) 3-Phase Motor (4 Pole).

CapacitykW


OutdoorType Class 2

Inslation ClassB F

5.57.51115

18.52230374555

RemarksContinuous RatingApplicable Voltage: 200V, 220V, 350V, 380V, 400V, 440V, 50/60Hz

CapacitykW


OutdoorType

Corrosion-proofClass 2

Inslation Class Inverter Motors (Constant Torque)B Indoor Type

5.57.51115

18.5223037

Remarks

Continuous RatingApplicable Voltage : 200V , 220V , 350V , 380V , 400V , 440V 50/60Hz(Inverter Motors) : 200V 60Hz , 220V 60Hz , 400V 60Hz , 440V 60HzApplicable Inverter :Applicable only to Sumitomo Inverters.(Refer to Inverter catalogue.)



Corrosion-proof

A - 8

Hollow shaft

Drop bearing housing

Ceiling mount

Upright wall mount

Upright mount

With Motor

Parallel

Drive unit right angleDrive unit parallel

Top mount

Right angle

Vertical mount

INTRODUCTION OF APPLICATION

Common base

Double Stack

Single stage

Reducer

Steel housing

Mounting

Special slow speed shaft

B

Drive Unit

<Drive Unit Right Angle Shaft>

<Drive Unit Parallel Shaft>

Standard Specifications B- 2 Construction Drawing B- 3 Nomenclature B- 4Selection B- 6Service Factor SF B- 8Right Angle Shaft B- 11Parallel Shaft B- 73Exact Reduction Ratio B- 110

B - 2

Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

Drive Unit Standard Specifications

Item Standard Specification Standard Specification with Built-in Brake

CapacityRange 5.5kWX4P 55kWX4P

5.5kWX4P 11kWX4P FB Brake (Non Asbestos)15kWX4P CMB Brake18.5kWX4P 37kWX4P ESB Brake

Enclosure Totally enclosed fan cooled type Totally enclosed fan cooled type

PowerSource 55kW and smaller 200V 50/60Hz, 220V 60Hz 15kW and smaller 200V 50/60Hz, 220V 60Hz

Insulation

PInsulation 4P P

Insulation 4P

Class B 5.5 22kW Class B 5.5 15kW

Class F 30 55kW

Time Rating Continuous rating Continuous rating

LeadWiring(LugType)

PLead wiring 4P P

Lead wiring 4P

3 5.5 7.5kW(Direct starting) 5 5.5 7.5kW

(Direct starting)

6Note 1 11 55kW

( - starting available) 8Note 1 11 37kW

( - starting available)

Standards According to JIS

Note 1: - start is also available. Please consult us.

ItemStandard Specification

Mounting High Speed Shaft Speed

LubricationMethod

Horizontal Shaft 750 1800r/minOil bath lubricationIn case of high speed shaft speed is less than 750r/min, electric pump lubrication may be used. Consult SUMITOMO for details.

Vertical Shaft 400 1800r/minPump lubrication(Two different pump lubrication systems are available; shaft connected pump lubrication and electric pump lubrication. For details, refer to the outside dimension drawing.)

Upright Shaft 750 1800r/min Oil bath lubricationGrease lubrication for right angle input shaft.

Lubricant Refer to the page D-2

GearType Involute external gear

InstallationLocation Indoor (Minimal dust and humidity)

AmbientTemperature

10 40A cooling fan may provided depending on the usage (Note 1)

AmbientHumidity Under 85%

Elevation Under 1,000 meters

Atmosphere Well ventilated location, free of corrosive gases, explosive gases, vapors and dust.

Installation Horizontal installationRefer to the page D-2

Method of Coupling with

Driven MachineCoupling, gears, chain sprocket or belt.

Painting

Surface preparation: Shot blasting after washing before machiningInside painting: UNI GROUND PTC primer is sprayed onceOutside painting: For prime-coating, UNI GROUND PTC primer is sprayed once. For final coating, NEO ALKYS is sprayed once.Painting color: MANSEL 5G 6/4.5. Refer to the page D-3.

Note 1: In general, a heating or cooling system is necessary in case the ambient temperature is lower than 10or higher than +50 .

Mot

orR

educ

erAm

bien

t Con

ditio

ns

B - 3

Drive Unit Construction Drawing

9

23

22

21

11

20

18 17 16 15 14 13 12

1 2 3 4 5 6 7 8 9 10 11

19

Drive Unit Right Angle Shaft Triple Reduction

Drive Unit Parallel Shaft Triple Reduction

Ref.No. Part Name Ref.No. Part Name Ref.No. Part Name Ref.No. Part Name

1 Housing 7 Taper roller bearing 13 Taper roller bearing 19 Taper roller bearing

2 Helical gear 8 Bearing housing 14 Helical pinion shaft 20 Helical gear

3 Slow speed shaft 9 Flange for motor 15 Helical pinion shaft 21 Helical pinion shaft

4 Taper roller bearing 10 Oil seal 16 Helical gear 22 Motor adapter

5 Bevel gear 11 Motor 17 Collar 23 Coupling

6 Taper roller bearing 12 Bevel pinion shaft 18 Oil seal

B - 4

Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

1. For shaft arrangement, refer to the dimension sheets.2. Consult us for reduction ratios smaller than 6.3.

P H A R 39055

Series Mounting Shaft Position Number of Gear Stage

Horizontal

Vertical

Right Angle

Upright

Monoblock

Split

Double Reduction

Triple Reduction

QuadrupleReduction

P

H

V

W

2

3

4

P

RHousing

A

D

Size TorquekNm

Parallel

Paramax

9015 2.6

9025 4.2

9030 6.4

9035 8.5

9040 10.1

9045 13.2

9050 15.3

9055 19.9

9060 24.4

9065 31.4

9070 38.2

9075 47.8

9080 58.5

9085 73.1

Drive Unit Nomenclature

B - 5

R M L 35.5K

Slow Speed Shaft

(Blank)

NominalRatio

Right Angle Shaft

ShaftArrangement High Speed Shaft

Hollow Shaft(Key Type)

Hollow Shaft(Shrink Disk Type)

K

T

6.3 7.1 8 9 10 11.2 12.5 14 16 18 20 22.4 25 28 31.5 35.5 40 45 50

56 63 71 80 90100112125140160180200224250280315355400450

Parallel Shaft 6.3 7.1 8 9 10 11.2 12.5 14 16 18 20 22.4 25 28 31.5 35.5 40 45 50

56 63 71 80 90100112125140160180200224250280315355400450500

Flange for Motor(Right Angle Shaft)

Right Angle Shaft

J

Y

M(Blank)

W

Mounting for Upright

Wall Mount(Upright

Mounting)

Solid Shaft

Motor Adapter(Parallel Shaft)

Parallel Shaft

RL

RR

LB

LL

LR

RB

RL

RR

Option

(Blank)

Without Option

With Backstop

B

B

Drive Unit Nomenclature

B - 6

Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

Calculate motor power

Select of output speed and ratio

Determine the service factor

Determine shaft and mounting positions

Determine drive unit

Determine Nomenclature

De

term

ine

No

me

nc

latu

reC

he

ck

Ov

erh

an

g L

oa

d

Check motor specification

Model Select

Determine overhang coefficient

Calculate equivalent radial load

Calculate equivalent thrust load

No

Cf Overhang factor

Fr Actual radial load

Fx Actual thrust load

Equivalent radial load Fr Fr SF Cf

FxE Fx SFEquivalent thrust load

FrA Allowable radial load

FxA Allowable thrust load

Right angle shaft: Page C-42 C-49

Parallel shaft: Page C-136 C-143

Yes

Check

overhang load

F rE

F rA

F XE

F XA

Is overhang load applied to the shaft?

Yes

No

Ambient condition Standard Specifications Page B-2

Service Factor SF Page B-8

Nomenclature Page B-4 B-5

Available combination of basic motor

Page A-6 and A-7

Selection tablesRight angle shaft: Page B-16 B-37 Parallel shaft: Page B-78 B-96

Page number of relevant

Dimension Table is indicated

in the Selection Table.

Select shaft arrangement from

"Standard Shaft Arrangement

Configuration" in the Dimension

Tables.

Heavy duty bearing.Consult us for larger overhang load.

De

term

ine

dri

ve

un

itReference page No.

Drive Unit Selection

B - 7

Reference page No.Conditions Selected item

B-8 Service Factor

B-4 B-5 Nomenclature

Load Power P P = 17kW

Motor power 18.5 kW

Electric source 200V 50Hz

Output speed 33 r/min

Load condition

Type of load, Operating hours Uniform load 14 hors/day

Determine service factor 1.25

Shaft and mounting positions Right Angle Shaft Horizontal Mounting

Determine size, shaft position, number of stages 9030 R3 45

Size 9030

Right Angle Shaft Triple Reduction

Nominal Reduction Ratio 45

Check dimension

Check shaft arrangement RML

Check nomenclature PHA9030R3-RML-45

Check Overhang load

Overhang member Sprocket (Single row)

Overhang factor Cf Cf = 1.0

Radial load position and direction Center of solid shaft, Downward

Radial load Fr 8.5 kN

Thrust load Fx 0 kN

Equivalent radial load Fr E

Fr XFrE 8.5 1.25 1.0 = 10.6

Equivalent axial load FrX = 0

=

1.25 = 0

Allowable radial load 26.5 kN

Allowable thrust load 26.5 kN

Ambient Condition Indoor, Ambient temperature 20

Check ambient condition OK

Motor specification 200V 50Hz without brake indoor

Check motor specification OK

Model selectedPHA9035R3-RML-45

200V 50Hz without brake indoor

B-24 Selection Tables

B-44 Dimension Tables

B-38 Allowable Radial Load

B-38 Allowable external load

B-38 Allowable Thrust Load

B-2 Standard Specifications

A-6 Available Combination

of Basic Motor

26.5

10.6

26.5

0+ = 0.40 < 1 OK

*1

*1 Page number of therelevant DimensionTable is indicated in the Selection Table.

Drive Unit Selection Example

B - 8

Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

Notes:(1) Values in the above table are based on AGMA standards and SUMITOMO's

experience.(2) Values in the above table apply for electric motors as prime movers - if prime

mover is a multi cylinder combustion engine, 0.25 has to be added to the SF.(3) Consult us for special duty or when special safety specifications are needed.(4) ※ : For SF, consult us.

METAL STRIP PROCESSING MACHINERY

Driven MachineOperating Hours (hours/day)3 hrs 10 hrs 24 hrs

CRANESClassification of

Crane Hoisting Traverse Motion

Travel Motion

SlewingMotion

BoomHoisting

The crane classification is based on JIS B8821-1976"Calculation standard for the structure of crane."

Group 1.00 1.50 1.25 1.00Group 1.25 1.50 1.00Group 1.50 1.75 1.25Group 1.75 2.00 1.50

CONVEYORS (General purpose)Uniformly load or fedHeavy loadNot uniformly fedReciprocating or shaker

1.00

1.001.50

1.00

1.251.75

1.25

1.502.00

ELEVATORSElevatorsEscalators

1.501.25

1.501.25

1.501.25

METAL MILLSDraw bench carriage and main driveRunout table

Non reversingGroup drivesIndividual drivers

ReversingSlab pushersShearsWire drawingWire winding machine

1.50

1.502.002.001.502.001.251.25

1.50

1.502.002.001.502.001.251.50

1.50

1.502.002.001.502.001.251.50

BridlesCoilers & uncoilersEdge trimmersFlattenersLoopers (Accumulators)Pinch rollsScrap choppersShearsSlitters

1.501.001.001.251.501.252.002.001.00

1.501.251.251.251.501.252.002.001.25

1.501.501.501.502.001.502.002.001.50

MILL, ROTARY TYPEBall and rodCement KilnsKilns (Except cement klins)Dryers and coolers

2.002.001.501.50

2.002.001.501.50

2.002.001.501.50

SEWAGE DISPOSAL EQUIPMENTAeratorsBar screensChemical feedersDewatering screensScum breakersSlow or rapid mixersSludge collectorsThickenersVacuum filters

2.001.251.251.501.501.501.251.501.50

2.001.251.251.501.501.501.251.501.50

2.001.251.251.501.501.501.251.501.50

EXTRUDERSPlasticsRubber

1.251.50

1.251.50

1.251.50

FEEDERSApronBeltDiskReciprocatingScrew

1.001.001.001.501.00

1.251.251.001.751.25

1.501.501.252.001.50


RUBBER INDUSTRYMixersMixing mill -2 smooth rollsBatch drop mill -2 smooth rollsCracker warmer

-2 roll: 1 corrugated rollCracker -2 corrugated rollsHolding, feed and blend mill

-2 rollsRefiner -2 rollsCalenders

1.751.501.50

1.752.00

1.251.501.50

1.751.501.50

1.752.00

1.251.501.50

2.001.751.50

1.752.00

1.251.501.50

PAPER MILLAll types incl. Paper making machine 2.00 2.00 2.00

AGITATORS AND MIXERSPure liquidsLiquids and solidsLiquids variable density

1.001.001.00

1.001.251.25

1.251.501.50

MIXERSConcrete 1.25 1.25 1.50

CRUSHERStone or ore 2.50 2.50 2.50

BLOWERSCentrifugalLobeVane

1.001.001.00

1.001.251.25

1.251.501.50

COMPRESSORSCentrifugalLobeReciprocating: multi cylinderReciprocating: single cylinder

1.001.001.501.75

1.001.251.501.75

1.251.501.752.00

FANSCentrifugalCooling towersForced draftSuction draftIndustrial and mine

1.00※

1.251.501.50

1.00※

1.251.501.50

1.25※

1.251.501.50

PUMPSCentrifugalScrew pumpGear pump

1.001.251.25

1.001.251.25

1.251.501.50

DREDGESCable reelsConveyorsCutter head drivePumpsScreen drivesStackersWinches

1.251.252.002.001.751.251.25

1.251.252.002.001.751.251.25

1.501.502.002.002.001.501.50

GENERATORS AND EXCITERS 1.00 1.00 1.25HAMMER MILLS 1.75 1.75 2.00SUGAR INDUSTRY

Beet slicerCane knivesCrushersMills (Slow speed end)

2.001.501.501.75

2.001.501.501.75

2.001.501.501.75

Service Factor SF

Drive Unit Service Factor SF

B - 9

Refer to the following for driven machines not shown on the left page.

Prime Mover Operating Hours

Type of Load

Uniform Load Moderate Shock Load

Heavy Shock Load

U M H

Electric Motor3 hours/day10 hours/day24 hours/day

1.001.001.25

1.001.251.50

1.501.752.00

Internal Combustion Engine

(multi cylinder)

3 hours/day10 hours/day24 hours/day

1.001.251.50

1.251.501.75

1.752.002.25

Note: Consult us when the operating hours are less than 3 hours/day or when an internal combustion engine (single cylinder) is used.

Drive Unit Service Factor SF

B - 10

Selection B- 12 Allowable Radial B- 38 and Thrust LoadsDimension Sheets B- 42Exact Actual Ratio B- 110

<Drive Unit Right Angle Shaft Vertical Mounting>

<Drive Unit Right Angle Shaft Horizontal Mounting>

<Drive Unit Right Angle Shaft Upright Mounting>

B

Drive Unit Right Angle Shaft

B - 12

Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

Shaft Position High Speed Shaft Speed Ambient Temperature

Right Angle Shaft 1500r/min 40 Degree

kW SF

Low Speed Shaft Speed（r/min）

238 211 188 167 150 134 120 107 94 83 75 67 60 54 48 42 38 33 30

Nominal Reduction Ratio

6.3 7.1 8 9 10 11.2 12.5 14 16 18 20 22.4 25 28 31.5 35.5 40 45 50

5.5kW

4P

1 9030 9030 9030 9030 9030

1.25 9030 9030 9030 9030 9030

1.5 9030 9030 9030 9030 9030

2 9030 9030 9030 9030 9030

7.5kW

4P

1 9030 9030 9030 9030 9030 9030

1.25 9030 9030 9030 9030 9030 9030

1.5 9030 9030 9030 9030 9030 9030

2 9030 9030 9030 9030 9030 9030

11kW

4P

1 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030

1.25 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030

1.5 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9035

2 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9035

15kW

4P

1 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030

1.25 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9035

1.5 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9035

2 9030 9030 9030 9030 9030 9030 9030 9030 9035 9035 9040 9040 9045

18.5kW

4P

1 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9035

1.25 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9035

1.5 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9035 9035 9040 9040 9045

2 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9035 9035 9040 9045 9045

22kW

4P

1 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9035

1.25 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9035 9035 9040 9040 9045

1.5 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9035 9035 9040 9040 9045

2 9030 9030 9030 9030 9030 9030 9030 9030 9035 9035 9030 9030 9035 9035 9040 9045 9045 9045 9050

30kW

4P

1 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9035 9035 9035 9035 9040 9040 9045

1.25 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9035 9035 9035 9035 9040 9045 9045

1.5 9030 9030 9030 9030 9030 9030 9030 9030 9035 9035 9030 9030 9035 9035 9040 9045 9045 9050 9050

2 9030 9030 9030 9030 9030 9030 9030 9030 9035 9035 9040 9040 9040 9045 9045 9050 9050 9055 9055

37kW

4P

1 9030 9030 9030 9030 9030 9030 9030 9030 9035 9035 9035 9035 9035 9040 9040 9040 9040 9045 9045

1.25 9030 9030 9030 9030 9030 9030 9030 9030 9035 9035 9040 9040 9035 9040 9040 9045 9045 9050 9050

1.5 9030 9030 9030 9030 9030 9030 9030 9030 9035 9035 9040 9040 9040 9045 9045 9045 9050 9055 9055

2 9030 9030 9030 9030 9030 9030 9035 9035 9045 9045 9050 9050 9050 9050 9050 9055 9055 9060 9060

45kW

4P

1 9030 9040 9035 9035 9035 9035 9035 9035 9035 9035 9040 9040 9040 9040 9045 9045 9045 9050 9050

1.25 9030 9040 9035 9035 9035 9035 9035 9035 9035 9035 9040 9040 9040 9045 9045 9045 9050 9055 9055

1.5 9030 9040 9035 9035 9035 9035 9035 9035 9045 9045 9040 9040 9045 9045 9045 9055 9055 9055 9060

2 9030 9040 9035 9035 9035 9035 9045 9045 9050 9050 9050 9055 9055 9060 9060 9065 9065

55kW

4P

1 9040 9040 9035 9040 9040 9040 9040 9040 9040 9045 9045 9045 9055 9055 9055 9055 9055 9055 9055

1.25 9040 9040 9035 9040 9040 9040 9040 9040 9045 9045 9050 9050 9055 9055 9055 9055 9055 9060 9060

1.5 9040 9040 9035 9040 9040 9040 9045 9045 9050 9050 9055 9055 9055 9055 9060 9065 9065

2 9040 9040 9040 9040 9040 9040 9045 9045 9070 9070 9070 9070 9070 9070 9070 9070 9075

SELECTION Drive Unit Right Angle Shaft Combinations with 4P motor

Size of Reducer

B - 13


SF kW27 24 21 19 17 15 13 12 11 9.4 8.3 7.5 6.7 6.0 5.4 4.8 4.2 3.8 3.3


56 63 71 80 90 100 112 125 140 160 180 200 224 250 280 315 355 400 450

9030 9030 9030 9035 9035 9040 9040 9040 9040 9045 9045 9050 9050 9050 9050 9050 9050 9055 9055 1

5.5kW

4P

9030 9030 9030 9035 9035 9040 9040 9040 9040 9045 9045 9050 9050 9050 9050 9050 9055 9055 9055 1.25

9030 9030 9030 9035 9035 9040 9040 9040 9040 9045 9045 9050 9050 9050 9055 9055 9055 9065 9065 1.5

9030 9030 9030 9035 9035 9040 9040 9040 9040 9045 9045 9050 9055 9055 9060 9060 9065 9065 9075 2

9030 9030 9030 9035 9035 9040 9040 9040 9040 9045 9045 9050 9050 9050 9050 9050 9055 9055 9065 1

7.5kW

4P

9030 9030 9030 9035 9035 9040 9040 9040 9040 9045 9045 9050 9050 9050 9055 9055 9060 9065 9065 1.25

9030 9030 9030 9035 9035 9040 9040 9040 9045 9045 9045 9050 9055 9055 9060 9060 9065 9065 9075 1.5

9030 9030 9035 9035 9035 9040 9045 9045 9050 9055 9055 9060 9060 9060 9065 9065 9070 9075 9075 2

9030 9030 9030 9035 9035 9040 9040 9040 9040 9045 9045 9050 9055 9055 9060 9060 9065 9065 9075 1

11kW

4P

9030 9030 9030 9035 9035 9040 9040 9045 9045 9045 9055 9055 9055 9060 9065 9065 9070 9075 9075 1.25

9035 9040 9040 9040 9040 9040 9045 9045 9055 9055 9055 9060 9065 9065 9065 9065 9070 9075 9075 1.5

9035 9040 9045 9045 9045 9050 9055 9055 9060 9065 9065 9070 9070 9070 9075 9075 9075 9085 9085 2

9030 9030 9035 9035 9035 9040 9045 9045 9050 9055 9055 9060 9060 9060 9065 9065 9070 9075 9075 1

15kW

4P

9035 9040 9040 9045 9045 9045 9050 9050 9055 9055 9060 9060 9065 9065 9070 9075 9075 9075 9085 1.25

9035 9040 9045 9045 9045 9050 9055 9055 9060 9065 9065 9070 9070 9070 9075 9075 9075 9085 9085 1.5

9045 9050 9050 9055 9055 9060 9060 9060 9065 9065 9070 9070 9075 9075 9080 9085 9085 9085 2

9035 9040 9040 9040 9045 9045 9050 9050 9055 9055 9060 9060 9065 9065 9070 9070 9075 9075 9075 1

18.5kW

4P

9035 9040 9045 9045 9050 9050 9055 9055 9065 9065 9065 9070 9070 9070 9075 9075 9080 9085 9085 1.25

9045 9050 9050 9055 9055 9060 9060 9060 9065 9065 9070 9070 9070 9075 9075 9080 9085 9085 1.5

9050 9050 9055 9055 9060 9060 9065 9065 9070 9075 9075 9080 9080 9080 9085 9085 2

9035 9040 9045 9045 9045 9050 9055 9055 9060 9065 9065 9070 9070 9070 9075 9075 9075 9085 9085 1

22kW

4P

9045 9050 9050 9055 9055 9060 9060 9060 9065 9065 9070 9070 9070 9075 9075 9080 9085 9085 1.25

9045 9050 9055 9055 9055 9060 9065 9065 9065 9065 9070 9070 9075 9075 9085 9085 9085 1.5

9055 9055 9060 9065 9065 9070 9070 9070 9075 9075 9075 9080 9085 9085 9085 2

9045 9050 9050 9055 9055 9060 9060 9060 9065 9065 9070 9070 9075 9075 9080 9085 9085 9085 1

30kW

4P

9050 9050 9055 9055 9065 9070 9065 9065 9070 9075 9075 9080 9080 9080 9085 9085 1.25

9055 9055 9060 9065 9065 9070 9070 9070 9075 9075 9080 9080 9085 9085 9085 1.5

9060 9060 9065 9065 9070 9070 9075 9075 9080 9085 9085 2

9050 9050 9055 9055 9060 9060 9065 9065 9070 9075 9075 9080 9080 9080 9085 9085 1

37kW

4P

9055 9055 9060 9065 9065 9070 9070 9070 9075 9075 9080 9080 9085 9085 1.25

9060 9060 9065 9065 9070 9070 9075 9075 9075 9080 9085 9085 1.5

9065 9065 9070 9075 9075 9080 9080 9080 9085 9085 2

9055 9055 9060 9065 9065 9070 9070 9070 9075 9075 9080 9080 9085 9085 9085 1

45kW

4P

9060 9060 9065 9065 9070 9070 9075 9075 9075 9080 9085 9085 1.25

9065 9065 9070 9075 9075 9080 9080 9080 9085 9085 9085 1.5

9070 9075 9075 9080 9080 9080 9085 9085 2

9060 9060 9065 9065 9070 9070 9075 9075 9075 9080 9085 9085 1

55kW

4P

9065 9065 9070 9075 9075 9080 9080 9080 9085 9085 1.25

9065 9070 9070 9075 9075 9080 9080 9085 9085 1.5

9075 2


B - 14

Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles


Right Angle Shaft 1800r/min 40 Degree

kW SF


286 254 225 200 180 161 144 129 113 100 90 80 72 64 57 51 45 40 36


6.3 7.1 8 9 10 11.2 12.5 14 16 18 20 22.4 25 28 31.5 35.5 40 45 50

5.5kW

4P

1 9030

1.25 9030

1.5 9030

2 9030

7.5kW

4P

1 9030 9030 9030 9030 9030

1.25 9030 9030 9030 9030 9030

1.5 9030 9030 9030 9030 9030

2 9030 9030 9030 9030 9030

11kW

4P

1 9030 9030 9035 9030 9030 9030 9030 9030 9030 9030 9030

1.25 9030 9030 9035 9030 9030 9030 9030 9030 9030 9030 9030

1.5 9030 9030 9035 9030 9030 9030 9030 9030 9030 9030 9030

2 9030 9030 9035 9035 9030 9030 9030 9030 9030 9030 9035

15kW

4P

1 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030

1.25 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030

1.5 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9035

2 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9035 9035

18.5kW

4P

1 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030

1.25 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9035

1.5 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9035

2 9030 9030 9030 9030 9030 9030 9030 9030 9035 9035 9040 9040 9045

22kW

4P

1 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9035

1.25 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9035

1.5 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9035 9035 9040 9040 9045

2 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9035 9035 9040 9045 9045

30kW

4P

1 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9035 9035 9035 9035 9035 9035 9035 9035

1.25 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9035 9035 9035 9035 9035 9040 9040 9045

1.5 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9035 9035 9035 9035 9035 9040 9045 9045

2 9030 9030 9030 9030 9030 9030 9030 9030 9035 9035 9030 9040 9035 9040 9045 9045 9050 9050 9055

37kW

4P

1 9030 9030 9030 9030 9030 9030 9030 9030 9035 9035 9035 9035 9035 9040 9040 9040 9040 9040 9045

1.25 9030 9030 9030 9030 9030 9030 9030 9030 9035 9035 9035 9035 9035 9040 9040 9040 9040 9045 9045

1.5 9030 9030 9030 9030 9030 9030 9030 9030 9035 9035 9040 9040 9035 9040 9040 9045 9045 9050 9050

2 9030 9030 9030 9030 9030 9030 9035 9035 9040 9040 9040 9040 9040 9045 9045 9050 9055 9055 9055

45kW

4P

1 9040 9040 9035 9035 9035 9035 9035 9035 9035 9035 9040 9040 9040 9040 9045 9045 9045 9045 9045

1.25 9040 9040 9035 9035 9035 9035 9035 9035 9035 9035 9040 9040 9040 9040 9045 9045 9045 9045 9050

1.5 9040 9040 9035 9035 9035 9035 9035 9035 9035 9035 9040 9040 9040 9045 9045 9045 9045 9055 9055

2 9040 9040 9035 9035 9035 9035 9035 9035 9045 9045 9050 9050 9050 9050 9050 9055 9055 9060 9065

55kW

4P

1 9040 9040 9040 9040 9040 9040 9040 9040 9040 9045 9045 9045 9055 9055 9055 9055 9055 9055 9055

1.25 9040 9040 9040 9040 9040 9040 9040 9040 9040 6045 6045 6045 9055 9055 9055 9055 9055 9055 9055

1.5 9040 9040 9040 9040 9040 9040 9040 9040 9045 9045 9050 9050 9055 9055 9055 9055 9055 9060 9060

2 9040 9040 9040 9040 9040 9040 9045 9045 9060 9060 9060 9060 9065 9065 9070 9070 9070


Size of Reducer

B - 15


SF kW32 29 25 23 20 18 16 14 13 11 10 9.0 8.0 7.2 6.4 5.7 5.1 4.5 4.0


56 63 71 80 90 100 112 125 140 160 180 200 224 250 280 315 355 400 450

9030 9030 9030 9035 9035 9040 9040 9040 9040 9045 9045 9050 9050 9050 9050 9050 9050 9055 9055 1

5.5kW

4P

9030 9030 9030 9035 9035 9040 9040 9040 9040 9045 9045 9050 9050 9050 9050 9050 9050 9055 9055 1.25

9030 9030 9030 9035 9035 9040 9040 9040 9040 9045 9045 9050 9050 9050 9050 9050 9055 9055 9055 1.5

9030 9030 9030 9035 9035 9040 9040 9040 9040 9045 9045 9050 9055 9050 9055 9055 9060 9065 9065 2

9030 9030 9030 9035 9035 9040 9040 9040 9040 9045 9045 9050 9050 9050 9050 9050 9050 9055 9055 1

7.5kW

4P

9030 9030 9030 9035 9035 9040 9040 9040 9040 9045 9045 9050 9050 9050 9050 9055 9055 9055 9065 1.25

9030 9030 9030 9035 9035 9040 9040 9040 9040 9045 9045 9050 9050 9050 9055 9055 9060 9065 9065 1.5

9030 9030 9030 9035 9035 9040 9040 9040 9045 9045 9050 9050 9055 9055 9060 9065 9065 9075 9075 2

9030 9030 9030 9035 9035 9040 9040 9040 9040 9045 9045 9050 9050 9050 9055 9055 9060 9065 9065 1

11kW

4P

9030 9030 9030 9035 9035 9040 9040 9040 9045 9045 9045 9050 9055 9055 9060 9060 9065 9065 9075 1.25

9030 9030 9030 9035 9035 9040 9040 9045 9045 9045 9055 9055 9055 9060 9065 9065 9070 9075 9075 1.5

9035 9040 9040 9040 9045 9045 9045 9050 9055 9055 9060 9060 9065 9065 9070 9070 9075 9075 9075 2

9030 9030 9030 9035 9035 9040 9040 9040 9045 9045 9050 9050 9055 9055 9060 9065 9065 9075 9075 1

15kW

4P

9030 9030 9035 9035 9035 9040 9045 9045 9050 9055 9055 9060 9060 9060 9065 9065 9070 9075 9075 1.25

9035 9040 9040 9040 9045 9045 9050 9050 9055 9055 9060 9060 9065 9065 9070 9070 9075 9075 9085 1.5

9040 9040 9045 9045 9050 9055 9055 9055 9060 9065 9065 9070 9070 9070 9075 9075 9080 9085 9085 2

9030 9030 9035 9035 9035 9040 9045 9045 9050 9055 9055 9060 9060 9060 9065 9065 9070 9075 9075 1

18.5kW

4P

9035 9040 9040 9040 9045 9045 9050 9050 9055 9055 9060 9060 9065 9065 9070 9075 9075 9075 9085 1.25

9035 9040 9045 9045 9050 9050 9055 9055 9060 9065 9065 9070 9070 9070 9075 9075 9080 9085 9085 1.5

9045 9050 9050 9055 9055 9060 9060 9060 9065 9065 9070 9070 9075 9075 9080 9085 9085 2

9035 9040 9040 9040 9045 9045 9045 9050 9055 9055 9060 9060 9065 9065 9070 9070 9075 9075 9075 1

22kW

4P

9035 9040 9045 9045 9045 9050 9055 9055 9060 9065 9065 9070 9070 9070 9075 9075 9080 9085 9085 1.25

9045 9050 9050 9055 9055 9060 9060 9060 9065 9065 9070 9070 9070 9075 9075 9080 9085 9085 1.5

9050 9050 9055 9055 9060 9060 9065 9065 9070 9075 9075 9080 9080 9080 9085 9085 2

9040 9040 9045 9045 9050 9055 9055 9055 9060 9065 9065 9070 9070 9070 9075 9075 9080 9085 9085 1

30kW

4P

9045 9050 9050 9055 9055 9060 9060 9060 9065 9065 9070 9070 9075 9075 9080 9085 9085 1.25

9050 9050 9055 9055 9060 9060 9065 9065 9070 9075 9075 9080 9080 9080 9085 9085 1.5

9055 9055 9060 9065 9065 9070 9070 9070 9075 9075 9080 9085 9085 9085 2

9045 9050 9050 9055 9055 9060 9060 9060 9065 9065 9070 9070 9075 9075 9080 9085 9085 1

37kW

4P

9050 9050 9055 9055 9065 9070 9070 9070 9070 9075 9075 9080 9080 9085 9085 9085 1.25

9055 9055 9060 9065 9065 9070 9070 9070 9075 9075 9080 9080 9085 9085 1.5

9060 9065 9065 9070 9070 9070 9075 9075 9080 9085 9085 2

9050 9055 9055 9055 9060 9060 9065 9065 9070 9075 9075 9080 9080 9080 9085 9085 1

45kW

4P

9055 9055 9060 9065 9065 9070 9070 9070 9075 9075 9080 9080 9085 9085 1.25

9060 9060 9065 9065 9070 9070 9075 9075 9075 9080 9085 9085 1.5

9065 9070 9070 9075 9075 9080 9080 9080 9085 9085 2

9055 9055 9060 9065 9065 9070 9070 9070 9075 9075 9080 9080 9085 9085 1

55kW

4P

9060 9065 9065 9070 9070 9070 9075 9075 9075 9085 9085 1.25

9065 9065 9070 9075 9075 9080 9080 9080 9085 9085 1.5

9070 9075 9075 9080 9080 9080 9085 9085 2


B - 16

Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

5.5kWFrequency Hz 50Hz 60HzPole P 4 4

n1 r/min 1500 1800

Frequency Model Page of Dimension Sheet50Hz 60HzOutput Speed

r/minOutput Torque (Tout) SF Output Speed

r/minOutput Torque (Tout) SF Size Assembly Reduction

Ratio Horizontal Vertical UprightNm kgf m Nm kgf m47.6 1100 113 4.89 57.1 919 94 5.81 9030 R3 31.5 B-44 B-54 B-6442.3 1240 127 4.89 50.7 1040 106 5.81 9030 R3 35.5 B-44 B-54 B-64

37.5 1400 143 4.69 45.0 1170 119 5.45 9030 R3 40 B-44 B-54 B-644.89 5.81 9035 R3 40 B-44 B-54 B-64

33.3 1580 161 4.21 40.0 1310 134 5.05 9030 R3 45 B-44 B-54 B-644.89 5.81 9035 R3 45 B-44 B-54 B-64

30.0 1750 1792.92

36.0 1460 1493.50 9030 R3 50 B-44 B-54 B-64

4.89 5.81 9035 R3 50 B-44 B-54 B-644.74 5.69 9040 R3 50 B-44 B-54 B-64

26.8 1960 2002.92

32.1 1630 1673.50 9030 R3 56 B-44 B-54 B-64

4.47 5.34 9035 R3 56 B-44 B-54 B-644.74 5.69 9040 R3 56 B-44 B-54 B-64

23.8 2210 225 2.92 28.6 1840 188 3.50 9030 R3 63 B-44 B-54 B-644.74 5.69 9040 R3 63 B-44 B-54 B-64

21.1 2490 254

2.69

25.4 2070 212

3.21 9030 R3 71 B-44 B-54 B-642.92 3.50 9035 R3 71 B-44 B-54 B-643.98 4.76 9040 R3 71 B-44 B-54 B-644.74 5.69 9045 R3 71 B-44 B-54 B-64

18.8 2800 2862.92

22.5 2330 2383.50 9035 R3 80 B-44 B-54 B-64

3.89 4.65 9040 R4 80 B-48 B-58 B-684.74 5.69 9045 R3 80 B-48 B-58 B-68

16.7 3150 322

2.85

20.0 2630 268


15.0 3500 3583.05

18.0 2920 2983.65 9040 R4 100 B-48 B-58 B-68

3.94 4.72 9045 R4 100 B-48 B-58 B-684.52 5.41 9050 R4 100 B-48 B-58 B-68

13.4 3920 400

2.50

16.1 3270 334


12.0 4380 447

2.47

14.4 3650 372


10.7 4900 501

2.03

12.9 4090 417

2.43 9040 R4 140 B-48 B-58 B-682.63 3.14 9045 R4 140 B-48 B-58 B-682.98 3.56 9050 R4 140 B-48 B-58 B-683.89 4.65 9955 R4 140 B-48 B-58 B-684.65 5.45 9060 R4 140 B-50 B-60 B-70

9.4 5600 5722.50

11.3 4670 4773.00 9045 R4 160 B-48 B-58 B-68

2.60 3.10 9050 R4 160 B-48 B-58 B-683.87 4.63 9055 R4 160 B-48 B-58 B-68

8.3 6300 644

2.12

10.0 5250 536


7.5 7000 7152.27

9.0 5840 5962.72 9050 R4 200 B-48 B-58 B-68

3.69 4.41 9060 R4 200 B-50 B-60 B-703.89 4.67 9065 R4 200 B-50 B-60 B-70

6.7 7840 8011.87

8.0 6540 6672.23 9050 R4 224 B-48 B-58 B-68

2.90 3.49 9060 R4 224 B-50 B-60 B-703.89 4.67 9065 R4 224 B-50 B-60 B-70

6.0 8750 894

1.81

7.2 7300 745


5.4 9800 1000

1.94

6.4 8170 834


4.8 11030 1130

1.40

5.7 9190 938

1.67 9050 R4 315 B-48 B-58 B-681.94 2.32 9055 R4 315 B-48 B-58 B-682.09 2.50 9060 R4 315 B-50 B-60 B-703.09 3.70 9065 R4 315 B-50 B-60 B-703.40 4.09 9070 R4 315 B-50 B-60 B-704.94 5.81 9075 R4 315 B-50 B-60 B-70

4.2 12430 1270

1.20

5.1 10360 1060

1.45 9050 R4 355 B-48 B-58 B-681.56 1.87 9055 R4 355 B-48 B-58 B-681.89 2.27 9060 R4 355 B-50 B-60 B-702.43 2.92 9065 R4 355 B-50 B-60 B-703.20 3.83 9070 R4 355 B-50 B-60 B-704.14 4.96 9075 R4 355 B-50 B-60 B-704.70 5.63 9080 R4 355 B-50 B-60 B-70

SELECTION Drive Unit Right Angle Shaft 5.5kW

B - 17




Ratio Horizontal Vertical UprightNm kgf m Nm kgf m

3.8 14010 14301.47

4.5 11670 11901.76 9055 R4 400 B-48 B-58 B-68

2.18 2.61 9065 R4 400 B-50 B-60 B-703.61 4.32 9075 R4 400 B-50 B-60 B-70

3.3 15760 1610

1.25

4.0 13130 1340



n1 r/min 1500 1800




Ratio Horizontal Vertical UprightNm kgf m Nm kgf m53.6 1340 137 4.93 64.3 1110 114 5.86 9030 R3 28 B-44 B-54 B-6447.6 1500 154 3.58 57.1 1250 128 4.26 9030 R3 31.5 B-44 B-54 B-6442.3 1700 173 3.58 50.7 1410 144 4.26 9030 R3 35.5 B-44 B-54 B-64

37.5 1910 195 3.44 45 1590 163 4.00 9030 R3 40 B-44 B-54 B-643.58 4.26 9035 R3 40 B-44 B054 B-64

33.3 2150 2193.09

40 1790 1833.70 9030 R3 45 B-44 B-54 B-64

3.58 4.26 9035 R3 45 B-44 B-54 B-644.57 5.48 9040 R3 45 B-44 B-54 B-64

30.0 2390 2442.14

36 1990 2032.57 9030 R3 50 B-44 B-54 B-64

3.58 4.26 9035 R3 50 B-44 B-54 B-643.48 4.17 9040 R3 50 B-44 B-54 B-64

26.8 2670 273

2.14

32.1 2230 228


23.8 3010 307 2.14 28.6 2510 256 2.57 9030 R3 63 B-44 B-54 B-643.48 4.17 9040 R3 63 B-44 B-54 B-64

21.1 3390 346

1.97

25.4 2830 288


18.8 3820 390

2.14

22.5 3180 325


16.7 4300 439

2.09

20.0 3580 366


15.0 4780 488

2.24

18.0 3980 406


13.4 5350 546

1.84

16.1 4460 455


12.0 5970 609

1.81

14.4 4970 508


SELECTION Drive Unit Right Angle Shaft 5.5kW, 7.5kW

B - 18

Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles





10.7 6690 683

1.49

12.9 5570 569


9.4 7640 780

1.84

11.3 6370 650


8.3 8600 878

1.56

10.0 7160 731


7.5 9550 975

1.66

9.0 7960 813


6.7 10700 1090

1.37

8.0 8910 910


6.0 11940 1220

1.33

7.2 9950 1020


5.4 13370 1370

1.09

6.4 11140 1140


4.8 15040 1540

1.02

5.7 12530 1280


4.2 16950 1730

0.88

5.1 14130 1440

1.06 9050 R4 355 B-48 B-58 B-681.14 1.37 9055 R4 355 B-48 B-58 B-681.38 1.66 9060 R4 355 B-50 B-60 B-701.78 2.14 9065 R4 355 B-50 B-60 B-702.34 2.81 9070 R4 355 B-50 B-60 B-703.04 3.64 9075 R4 355 B-50 B-60 B-703.45 4.13 9080 R4 355 B-50 B-60 B-704.53 5.46 9085 R4 355 B-50 B-60 B-70

3.8 19100 1950

1.07

4.5 15920 1630


3.3 21490 2190

0.92

4.0 17910 1830



B - 19

11kWFrequency Hz 50Hz 60HzPole P 4 4

n1 r/min 1500 1800




Ratio Horizontal Vertical UprightNm kgf m Nm kgf m93.8 1120 114 3.90 113 934 95 4.63 9030 R2 16 B-42 B-52 B-6283.3 1260 129 3.90 100 1050 107 4.63 9030 R2 18 B-42 B-52 B-6275.0 1400 143 4.63 90.0 1170 119 5.54 9030 R3 20 B-44 B-54 B-6467.0 1570 160 4.18 80.4 1310 133 5.00 9030 R3 22.4 B-44 B-54 B-64

60.0 1750 179 3.72 72.0 1460 149 4.45 9030 R3 25 B-44 B-54 B-644.90 5.81 9035 R3 25 B-44 B-54 B-64

53.6 1960 2003.36

64.3 1630 1674.00 9030 R3 28 B-44 B-54 B-64

4.45 5.27 9035 R3 28 B-44 B-54 B-645.00 5.90 9040 R3 28 B-44 B-54 B-64

47.6 2210 2252.44

57.1 1840 1882.90 9030 R3 31.5 B-44 B-54 B-64

3.90 4.63 9035 R3 31.5 B-44 B-54 B-644.37 5.18 9040 R3 31.5 B-44 B-54 B-64

42.3 2490 2542.44

50.7 2070 2122.90 9030 R3 35.5 B-44 B-54 B-64

3.54 4.27 9035 R3 35.5 B-44 B-54 B-643.81 4.63 9040 R3 35.5 B-44 B-54 B-64

37.5 2800 286

2.34

45.0 2330 238


33.3 3150 322

2.10

40.0 2630 268


30.0 3500 358

1.46

36.0 2920 298


26.8 3920 400

1.46

32.1 3270 334


23.8 4410 450

1.46

28.6 3680 375


21.1 4970 508

1.34

25.4 4140 423


18.8 5600 572

1.46

22.5 4670 477


16.7 6300 644

1.42

20.0 5250 536


15.0 7000 715

1.52

18.0 5840 596


13.4 7840 801

1.25

16.1 6540 667


12.0 8750 894

1.23

14.4 7300 745


SELECTION Drive Unit Right Angle Shaft 11kW

B - 20

Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles





10.7 9800 1000

1.01

12.9 8170 834


9.4 11210 1140

1.25

11.3 9340 953


8.3 12610 1290

1.06

10.0 10510 1070


7.5 14010 1430

1.13

9.0 11670 1190


6.7 15690 1600

0.93

8.0 13070 1330

1.11 9050 R4 224 B-48 B-58 B-681.27 1.52 9055 R4 224 B-48 B-58 B-681.45 1.74 9060 R4 224 B-50 B-60 B-701.94 2.33 9065 R4 224 B-50 B-60 B-702.55 3.00 9070 R4 224 B-50 B-60 B-703,00 3.54 9075 R4 224 B-50 B-60 B-703.90 4.63 9080 R4 224 B-50 B-60 B-704.90 5.90 9085 R4 224 B-50 B-60 B-70

6.0 17510 1790

0.90

7.2 14590 1490


5.4 19610 2000

0.97

6.4 16340 1670


4.8 22060 2250

0.97

5.7 18380 1880


4.2 24860 2540

0.94

5.1 20720 2120


3.8 28010 28601.09

4.5 23340 23801.30 9065 R4 400 B-50 B-60 B-70

1.80 2.16 9075 R4 400 B-50 B-60 B-702.72 3.27 9085 R4 400 B-50 B-60 B-70

3.3 31520 32200.98

4.0 26260 26801.18 9065 R4 450 B-50 B-60 B-70

1.69 2.03 9075 R4 450 B-50 B-60 B-702.46 2.90 9085 R4 450 B-50 B-60 B-70


B - 21


n1 r/min 1500 1800

FrequencyModel Page of Dimension Sheet50Hz 60Hz

Output Speedr/min

Output Torque (Tout) SF Output Speedr/min

Output Torque (Tout) SF Size Assembly ReductionRatio Horizontal Vertical UprightNm kgf m Nm kgf m

120 1190 122 4.06 144 995 102 4.86 9030 R2 12.5 B-42 B-52 B-62107 1340 137 4.06 129 1110 114 4.86 9030 R2 14 B-42 B-52 B-62

93.8 1530 1562.86

113 1270 1303.40 9030 R2 16 B-42 B-52 B-62

4.06 4.86 9035 R2 16 B-42 B-52 B-624.20 5.00 9040 R2 16 B-42 B-52 B-62

83.3 1720 1762.86

100 1430 1463.40 9030 R2 18 B-42 B-52 B-62

4.06 4.86 9035 R2 18 B-42 B-52 B-624.20 5.00 9040 R2 18 B-42 B-52 B-62

75.0 1910 195 3.40 90.0 1590 163 4.06 9030 R3 20 B-44 B-54 B-644.46 5.20 9040 R3 20 B-44 B-54 B-64

67.0 2140 218 3.06 80.4 1780 182 3.66 9030 R3 22.4 B-44 B-54 B-644.46 5.20 9040 R3 22.4 B-44 B-54 B-64

60.0 2390 2442.73

72.0 1990 2033.26 9030 R3 25 B-44 B-54 B-64

3.60 4.26 9035 R3 25 B-44 B-54 B-644.47 5.20 9040 R3 25 B-44 B-54 B-64

53.6 2670 273

2.46

64.3 2230 228


47.6 3010 307

1.79

57.1 2510 256

2.13 9030 R3 31.5 B-44 B-54 B-642.86 3.40 9035 R3 31.5 B-44 B-54 B-643.20 3.80 9040 R3 31.5 B-44 B-54 B-644.50 5.20 9045 R3 31.5 B-44 B-54 B-64

42.3 3390 346

1.79

50.7 2830 288

2.13 9030 R3 35.5 B-44 B-54 B-642.60 3.13 9035 R3 35.5 B-44 B-54 B-642.80 3.40 9040 R3 35.5 B-44 B-54 B-643.85 4.61 9045 R3 35.5 B-44 B-54 B-644.33 5.20 9050 R3 35.5 B-44 B-54 B-64

37.5 3820 390

1.72

45.0 3180 325


33.3 4300 439

1.54

40.0 3580 366


30.0 4780 488

1.07

36.0 3980 406


26.8 5350 546

1.07

32.1 4460 455


23.8 6020 614

1.07

28.6 5010 512


21.1 6780 692

0.98

25.4 5650 577



B - 22

Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles





18.8 7640 780

1.07

22.5 6370 650


16.7 8600 878

1.04

20.0 7160 731


15.0 9550 975

1.12

18.0 7960 813


13.4 10700 1090

0.92

16.1 8910 910


12.0 11940 1220

0.90

14.4 9950 1020

1.08 9040 R4 125 B-48 B-58 B-681.13 1.36 9045 R4 125 B-48 B-58 B-681.32 1.59 9050 R4 125 B-48 B-58 B-681.68 2.00 9055 R4 125 B-48 B-58 B-682.13 2.53 9060 R4 125 B-50 B-60 B-702.50 3.00 9065 R4 125 B-50 B-60 B-703.33 4.00 8970 R4 125 B-50 B-60 B-704.40 5.33 9075 R4 125 B-50 B-60 B-705.00 6.00 9080 R4 125 B-50 B-60 B-70

10.7 13370 1370

0.96

12.9 11140 1140

1.15 9045 R4 140 B-48 B-58 B-681,09 1.30 9050 R4 140 B-48 B-58 B-681.42 1.70 9055 R4 140 B-48 B-58 B-681.70 2.00 9060 R4 140 B-50 B-60 B-702.21 2.64 9065 R4 140 B-50 B-60 B-702.73 3.33 9070 R4 140 B-50 B-60 B-703.86 4.59 9075 R4 140 B-50 B-60 B-704.33 5.20 9080 R4 140 B-50 B-60 B-70

9.4 15280 1560

0.92

11.3 12730 1300


8.3 17190 1760

0.89

10.0 14330 1460


7.5 19100 1950

0.83

9.0 15920 1630



B - 23





6.7 21390 2180

0.93

8.0 17830 1820


6.0 23880 2440

0.89

7.2 19900 2030


5.4 26740 2730

0.86

6.4 22280 2280


4.8 30080 3070

1.13

5.7 25070 2560


4.2 33900 3460

0.89

5.1 28250 2880


3.8 38200 3900 1.32 4.5 31830 3250 1.58 9075 R4 400 B-50 B-60 B-702.00 2.40 9085 R4 400 B-50 B-60 B-70

3.3 42980 4390 1.24 4.0 35810 3660 1.49 9075 R4 450 B-50 B-60 B-701.80 2.13 9085 R4 450 B-50 B-60 B-70


n1 r/min 1500 1800




Ratio Horizontal Vertical UprightNm kgf m Nm kgf m150 1180 120 4.75 180 982 100 5.40 9030 R2 10 B-42 B-52 B-62134 1320 135 4.48 161 1100 112 5.40 9030 R2 11.2 B-42 B-52 B-62

120 1470 1503.29

144 1230 1253.94 9030 R2 12.5 B-42 B-52 B-62

4.37 5.24 9040 R2 12.5 B-42 B-52 B-624.75 5.40 9.35 R2 12.5 B-42 B-52 B-62

107 1650 168 3.29 129 1370 140 3.94 9.30 R2 14 B-42 B-52 B-624.75 5.40 9.35 R2 14 B-42 B-52 B-62

93.8 1880 192

2.32

113 1570 160


83.3 2120 216

2.32

100 1770 180


75.0 2360 241 2.75 90.0 1960 200 3.29 9030 R3 20 B-44 B-54 B-643.62 4.21 9040 R3 20 B-44 B-54 B-64

67.0 2640 269 2.48 80.4 2200 224 2.97 9030 R3 22.4 B-44 B-54 B-643.62 4.21 9040 R3 22.4 B-44 B-54 B-64

60.0 2940 3012.21

72.0 2450 2512.64 9030 R3 25 B-44 B-54 B-64

2.91 3.25 9035 R3 25 B-44 B-54 B-643.62 4.21 9040 R3 25 B-44 B-54 B-64

SELECTION Drive Unit Right Angle Shaft 15kW, 18.5kW

B - 24

Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles





53.6 3300 337

2.00

64.3 2750 281


47.6 3710 379

1.45

57.1 3090 316


42.3 4180 427

1.45

50.7 3480 356

1.72 9030 R3 35.5 B-44 B-54 B-642.10 2.54 9035 R3 35.5 B-44 B-54 B-642.27 2.75 9040 R3 35.5 B-44 B-54 B-643.12 3.74 9045 R3 35.5 B-44 B-54 B-643.51 4.21 9050 R3 35.5 B-44 B-54 B-644.45 5.40 9055 R3 35.5 B-44 B-54 B-64

37.5 4710 481

1.39

45.0 3930 401


33.3 5300 541

1.25

40.0 4420 451


30.0 5890 601

0.87

36.0 4910 501


26.8 6600 673

0.87

32.1 5500 561


23.8 7420 758

0.87

28.6 6180 631


21.1 8360 854

0.87

25.4 6970 711


18.8 9420 962

0.87

22.5 7850 802



B - 25





16.7 10600 1080

0.84

20.0 8830 902


15.0 11780 1200

0.90

18.0 9820 1000

1.08 9040 R4 100 B-48 B-58 B-681.17 1.40 9045 R4 100 B-48 B-58 B-681.34 1.61 9050 R4 100 B-48 B-58 B-682.00 2,43 9060 R4 100 B-50 B-60 B-703.51 4.21 9070 R4 100 B-50 B-60 B-70

13.4 13190 1350

0.99

16.1 10990 1120


12.0 14720 1500

0.91

14.4 12270 1250


10.7 16490 1680

0.88

12.9 13740 1400


9.4 18850 1920

1.15

11.3 15700 1600


8.3 21200 2160

0.92

10.0 17670 1800


7.5 23560 2410

1.09

9.0 19630 2000


6.7 26380 2690

0.86

8.0 21990 2240


6.0 29450 3010

0.88

7.2 24540 2510



B - 26

Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles





5.4 32980 3370

0.90

6.4 27480 2810


4.8 37100 3790

0.91

5.7 30920 3160


4.2 41810 4270

0.95

5.1 34840 3560


3.8 47110 4810 1.07 4.5 39260 4010 1.28 9075 R4 400 B-50 B-60 B-701.62 1.94 9085 R4 400 B-50 B-60 B-70

3.3 53000 5410 1.00 4.0 44170 4510 1.21 9075 R4 450 B-50 B-60 B-701.46 1.72 9085 R4 450 B-50 B-60 B-70


n1 r/min 1500 1800




Ratio Horizontal Vertical UprightNm kgf m Nm kgf m238 882 90 4.68 286 735 75 5.45 9030 R2 6.3 B-42 B-52 B-62211 994 102 4.68 254 829 85 5.45 9030 R2 7.1 B-42 B-52 B-62

188 1120 1144.45

225 934 955.13 9030 R2 8 B-42 B-52 B-62

4.68 5.45 9035 R2 8 B-42 B-52 B-62

167 1260 1294.45

200 1050 1075.13 9030 R2 9 B-42 B-52 B-62

4.68 5.45 9035 R2 9 B-42 B-52 B-62

150 1400 1434.00

180 1170 1194.54 9030 R2 10 B-42 B-52 B-62

4.45 5.13 9035 R2 10 B-42 B-52 B-62

134 1570 1603.77

161 1310 1334.54 9030 R2 11.2 B-42 B-52 B-62

4.45 5.13 9035 R2 11.2 B-42 B-52 B-62

120 1750 1792.77

144 1460 1493.31 9030 R2 12.5 B-42 B-52 B-62

4.00 4.54 9035 R2 12.5 B-42 B-52 B-62

107 1960 2002.77

129 1630 1673.31 9030 R2 14 B-42 B-52 B-62

4.00 4.54 9035 R2 14 B-42 B-52 B-62

93.8 2240 229

1.95

113 1870 191


83.3 2520 257

1.95

100 2100 215


75.0 2800 286

2.31

90.0 2330 238


67.0 3140 320

2.09

80.4 2610 267


60.0 3500 358

1. 86

72.0 2920 298


SELECTION Drive Unit Right Angle Shaft 18.5kW, 22kW

B - 27





53.6 3920 400

1.68

64.3 3270 334


47.6 4410 450

1.22

57.1 3680 375

1.45 9030 R3 31.5 B-44 B-54 B-641.95 2.31 9035 R3 31.5 B-44 B-54 B-642.18 2.59 9040 R3 31.5 B-44 B-54 B-643.07 3.54 9045 R3 31.5 B-44 B-54 B-643.59 4.13 9050 R3 31.5 B-44 B-54 B-644.31 4.90 9055 R3 31.5 B-42 B-52 B-624.95 5.59 9065 R3 31.5 B-46 B-56 B-66

42.3 4970 508

1.22

50.7 4140 423

1.45 9030 R3 35.5 B-44 B-54 B-641.77 2.13 9035 R3 35.5 B-44 B-54 B-641.90 2.31 9040 R3 35.5 B-44 B-54 B-642.62 3.14 9045 R3 35.5 B-44 B-54 B-642.95 3.54 9050 R3 35.5 B-44 B-54 B-643,81 4.54 9055 R3 35.5 B-44 B-54 B-644.22 4.77 9060 R3 35.5 B-46 B-56 B-664.95 5.59 9065 R3 35.5 B-46 B-56 B-66

37.5 5600 572

1.17

45.0 4670 477


33.3 6300 644

1.05

40.0 5250 536


30.0 7000 715

1.22

36.0 5840 596


26.8 7840 801

1.11

32.1 6540 667


23.8 8820 901

1.18

28.6 7350 751


21.1 9940 1020

0.99

25.4 8290 846



B - 28

Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles





18.8 11210 1140

0.97

22.5 9340 953


16.7 12610 1290

1.04

20.0 10510 1070


15.0 14010 1430

0.98

18.0 11670 1190


13.4 15690 1600

0.83

16.1 13070 1330


12.0 17510 1790

0.90

14.4 14590 1490


10.7 19610 2000

0.97

12.9 16340 1670


9.4 22410 2290

0.96

11.3 18680 1910


8.3 25210 2570

0.95

10.0 21010 2150


7.5 28010 2860

0.92

9.0 23340 2380


6.7 31370 3200

0.97

8.0 26150 2670


6.0 35020 3580

0.96

7.2 29180 2980



B - 29





5.4 39220 4000

0.97

6.4 32680 3340


4.8 44120 4500

0.85

5.7 36770 3750


4.2 49720 50801.03

5.1 41440 42301.24 9075 R4 355 B-50 B-60 B-70

1.17 1.40 9080 R4 355 B-50 B-60 B-701.54 1.86 9085 R4 355 B-50 B-60 B-70

3.8 56030 5720 0.90 4.5 46690 4770 1.08 9075 R4 400 B-50 B-60 B-701.36 1.63 9085 R4 400 B-50 B-60 B-70

3.3 63030 6440 0.84 4.0 52530 5360 1.01 9075 R4 450 B-50 B-60 B-701.23 1.45 9085 R4 450 B-50 B-60 B-70


n1 r/min 1500 1800





238 1200 123 3.43 286 1000 102 4.00 9030 R2 6.3 B-42 B-52 B-624.59 4.59 9040 R2 6.3 B-42 B-52 B-62

211 1360 138 3.43 254 1130 115 4.00 9030 R2 7.1 B-42 B-52 B-624.59 4.59 9040 R2 7.1 B-42 B-52 B-62

188 1530 1563.26

225 1270 1303.76 9030 R2 8 B-42 B-52 B-62

3.43 4.00 9035 R2 8 B-42 B-52 B-624.13 4.59 9040 R2 8 B-42 B-52 B-62

167 1720 1763.26

200 1430 1463.76 9030 R2 9 B-42 B-52 B-62

3.43 4.00 9035 R2 9 B-42 B-52 B-624.13 4.59 9040 R2 9 B-42 B-52 B-62

150 1910 195

2.93

180 1590 163


134 2140 218

2.76

161 1780 182


120 2390 2442.03

144 1990 2032.43 9030 R2 12.5 B-42 B-52 B-62

2.93 3.33 9035 R2 12.5 B-42 B-52 B-623.90 4.66 9045 R2 12.5 B-42 B-52 B-62

107 2670 2732.03

129 2230 2282.43 9030 R2 14 B-42 B-52 B-62

2.93 3.33 9035 R2 14 B-42 B-52 B-623.90 4.66 9045 R2 14 B-42 B-52 B-62

93.8 3060 312

1.43

113 2550 260

1.70 *9030 R2 16 B-42 B-52 B-622.03 2.43 9035 R2 16 B-42 B-52 B-622.10 2.50 9040 R2 16 B-42 B-52 B-622.70 3.23 9045 R2 16 B-42 B-52 B-62

83.3 3440 351

1.43

100 2870 293


75.0 3820 390

1.70

90.0 3180 325


67.0 4280 437

1.53

80.4 3570 364


* marked model upright type need additional cooling system for continuous operation.

SELECTION Drive Unit Right Angle Shaft 22kW, 30kW

B - 30

Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles





60.0 4780 488

1.80

72.0 3980 406


53.6 5350 546

1.63

64.3 4460 455


47.6 6020 614

1.43

57.1 5010 512


42.3 6780 692

1.30

50.7 5650 577

1.56 9035 R3 35.5 B-44 B-54 B-641.40 1.70 9040 R3 35.5 B-44 B-54 B-641.92 2.30 9045 R3 35.5 B-44 B-54 B-642.16 2.60 9050 R3 35.5 B-44 B-54 B-642.80 3.33 9055 R3 35.5 B-44 B-54 B-643.10 3.50 9060 R3 35.5 B-46 B-56 B-663.63 4.10 9065 R3 35.5 B-46 B-56 B-664.53 5.16 9070 R3 35.5 B-46 B-56 B-66

37.5 7640 780

0.89

45.0 6370 650


33.3 8600 878

0.89

40.0 7160 731


30.0 9550 975

0.89

36.0 7960 813


26.8 10700 1090

0.87

32.1 8910 910


23.8 12030 1230

0.87

28.6 10030 1020


21.1 13560 1380

0.87

25.4 11300 1150



B - 31





18.8 15280 1560

0.87

22.5 12730 1300


16.7 17190 1760

0.84

20.0 14330 1460


15.0 19100 1950

0.84

18.0 15920 1630


13.4 21390 2180

0.84

16.1 17830 1820


12.0 23880 2440

0.84

14.4 19900 2030


10.7 26740 2730

0.85

12.9 22280 2280


9.4 30560 3120

1.13

11.3 25470 2600


8.3 34380 3510

0.89

10.0 28650 2930


7.5 38200 39001.10

9.0 31830 32501.30 9070 R4 200 B-50 B-60 B-70

1.63 1.96 9080 R4 200 B-50 B-60 B-701.90 2.26 9085 R4 200 B-50 B-60 B-70

6.7 42780 4370

0.93

8.0 35650 3640


6.0 47750 4880

0.86

7.2 39790 4060


5.4 53480 54600.99

6.4 44570 45501.16 9075 R4 280 B-50 B-60 B-70

1.06 1.30 9080 R4 280 B-50 B-60 B-701.50 1.80 9085 R4 280 B-50 B-60 B-70

4.8 60170 61400.90

5.7 50140 51201.06 9075 R4 315 B-50 B-60 B-70

0.96 1.13 9080 R4 315 B-50 B-60 B-701.33 1.60 9085 R4 315 B-50 B-60 B-70

4.2 67810 6920 0.86 5.1 56500 5770 1.03 9080 R4 355 B-50 B-60 B-701.13 1.36 9085 R4 355 B-50 B-60 B-70

3.8 76400 7800 1.00 4.5 63670 6500 1.20 9085 R4 400 B-50 B-60 B-703.3 85950 8780 0.90 4.0 71630 7310 1.06 9085 R4 450 B-50 B-60 B-70


B - 32

Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles


n1 r/min 1500 1800





238 1480 152 2.78 286 1240 126 3.24 *9030 R2 6.3 B-42 B-52 B-623.72 3.72 9040 R2 6.3 B-42 B-52 B-62

211 1670 171 2.78 254 1390 142 3.24 *9030 R2 7.1 B-42 B-52 B-623.72 3.72 9040 R2 7.1 B-42 B-52 B-62

188 1880 192

2.64

225 1570 160


167 2120 216

2.64

200 1770 180


150 2360 241

2.37

180 1960 200


134 2640 269

2.24

161 2200 224

2.70 *9030 R2 11.2 B-42 B-52 B-622.64 3.05 9035 R2 11.2 B-42 B-52 B-623.05 3.45 9040 R2 11.2 B-42 B-52 B-623.89 4.67 9045 R2 11.2 B-42 B-52 B-62

120 2940 3011.64

144 2450 2511.97 *9030 R2 12.5 B-42 B-52 B-62

2.37 2.70 9035 R2 12.5 B-42 B-52 B-623.16 3.78 9045 R2 12.5 B-42 B-52 B-62

107 3300 3371.64

129 2750 2811.97 *9030 R2 14 B-42 B-52 B-62

2.37 2.70 9035 R2 14 B-42 B-52 B-623.16 3.78 9045 R2 14 B-42 B-52 B-62

93.8 3770 3851.64

113 3140 3211.97 9035 R2 16 B-42 B-52 B-62

1.70 2.02 9040 R2 16 B-42 B-52 B-622.18 2.62 9045 R2 16 B-42 B-52 B-62

83.3 4240 4331.64

100 3530 3611.97 9035 R2 18 B-42 B-52 B-62

1.70 2.02 9040 R2 18 B-42 B-52 B-622.18 2.62 9045 R2 18 B-42 B-52 B-62

75.0 4710 481

1.16

90.0 3930 401

1.37 *9035 R2 20 B-42 B-52 B-621.81 2.10 9040 R3 20 B-44 B-54 B-642.56 2.91 9050 R3 20 B-44 B-54 B-642.94 3.32 9060 R3 20 B-46 B-56 B-664.51 5.13 9070 R3 20 B-46 B-56 B-66

67.0 5280 539

1.16

80.4 4400 449

1.37 *9035 R2 22.4 B-42 B-52 B-621.81 2.10 9040 R3 22.4 B-44 B-54 B-642.56 2.91 9050 R3 22.4 B-44 B-54 B-642.94 3.32 9060 R3 22.4 B-46 B-56 B-664.51 5.13 9070 R3 22.4 B-46 B-56 B-66

60.0 5890 601

1.45

72.0 4910 501


53.6 6600 673

1.48

64.3 5500 561


47.6 7420 758

1.30

57.1 6180 631


42.3 8360 854

1.13

50.7 6970 711

1.37 9040 R3 35.5 B-44 B-54 B-641.56 1.87 9045 R3 35.5 B-44 B-54 B-641.75 2.10 9050 R3 35.5 B-44 B-54 B-642.27 2.70 9055 R3 35.5 B-44 B-54 B-642.51 2.83 9060 R3 35.5 B-46 B-56 B-662.94 3.32 9065 R3 35.5 B-46 B-56 B-663.67 4.18 9070 R3 35.5 B-46 B-56 B-664.51 5.13 9075 R3 35.5 B-46 B-56 B-66



B - 33





37.5 9420 962

1.10

45.0 7850 802


33.3 10600 1080

0.92

40.0 8830 902


30.0 11780 1200

1.15

36.0 9820 1000


26.8 13190 1350

0.97

32.1 10990 1120


23.8 14840 1520

1.05

28.6 12370 1260


21.1 16730 1710

0.86

25.4 13940 1420


18.8 18850 1920

1.13

22.5 15700 1600


16.7 21200 2160

0.91

20.0 17670 1800


15.0 23560 24101.00

18.0 19630 20001.21 9060 R4 100 B-50 B-60 B-70

1.75 2.10 9070 R4 100 B-50 B-60 B-702.67 3.05 9080 R4 100 B-50 B-60 B-70

13.4 26380 2690

0.83

16.1 21990 2240


12.0 29450 3010

0.86

14.4 24540 2510


10.7 32980 3370

0.89

12.9 27480 2810



B - 34

Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles





9.4 37690 3850

0.92

11.3 31410 3210


8.3 42400 4330

0.89

10.0 35340 3610


7.5 47110 48100.89

9.0 39260 40101.05 9070 R4 200 B-50 B-60 B-70

1.32 1.59 9080 R4 200 B-50 B-60 B-701.54 1.83 9085 R4 200 B-50 B-60 B-70

6.7 52770 53900.89

8.0 43970 44901.05 9075 R4 224 B-50 B-60 B-70

1.16 1.37 9080 R4 224 B-50 B-60 B-701.45 1.75 9085 R4 224 B-50 B-60 B-70

6.0 58890 60100.89

7.2 49080 50101.05 9075 R4 250 B-50 B-60 B-70

1.02 1.21 9080 R4 250 B-50 B-60 B-701.40 1.67 9085 R4 250 B-50 B-60 B-70

5.4 65960 6730 0.86 6.4 54970 5610 1.05 9080 R4 280 B-50 B-60 B-701.21 1.45 9085 R4 280 B-50 B-60 B-70

4.8 74200 7580 1.08 5.7 61840 6310 1.29 9085 R4 315 B-50 B-60 B-704.2 83630 8540 0.91 5.1 69690 7110 1.10 9085 R4 355 B-50 B-60 B-70


n1 r/min 1500 1800





238 1800 184 2.28 286 1500 154 2.66 *9030 R2 6.3 B-42 B-52 B-623.06 3.06 9040 R2 6.3 B-42 B-52 B-62

211 2030 208 3.06 254 1700 173 3.06 9040 R2 7.1 B-42 B-52 B-62

188 2290 2342.28

225 1910 1952.66 9035 R2 8 B-42 B-52 B-62

2.75 3.06 9040 R2 8 B-42 B-52 B-623.60 4.31 9045 R2 8 B-42 B-52 B-62

167 2580 2632.28

200 2150 2192.66 *9035 R2 9 B-42 B-52 B-62

2.75 3.06 9040 R2 9 B-42 B-52 B-623.60 4.31 9045 R2 9 B-42 B-52 B-62

150 2870 2932.17

180 2390 2442.51 *9035 R2 10 B-42 B-52 B-62

2.51 2.84 9040 R2 10 B-42 B-52 B-623.20 3.84 9045 R2 10 B-42 B-52 B-62

134 3210 3282.17

161 2670 2732.51 *9035 R2 11.2 B-42 B-52 B-62

2.51 2.84 9040 R2 11.2 B-42 B-52 B-623.20 3.84 9045 R2 11.2 B-42 B-52 B-62

120 3580 366 1.95 144 2980 305 2.22 *9035 R2 12.5 B-42 B-52 B-622.60 3.11 9045 R2 12.5 B-42 B-52 B-62

107 4010 410 1.95 129 3340 341 2.22 *9035 R2 14 B-42 B-52 B-622.60 3.11 9045 R2 14 B-42 B-52 B-62

93.8 4580 4681.35

113 3820 3901.62 *9035 R2 16 B-42 B-52 B-62

1.40 1.66 *9040 R2 16 B-42 B-52 B-621.80 2.15 9045 R2 16 B-42 B-52 B-62

83.3 5160 5271.35

100 4300 4391.62 *9035 R2 18 B-42 B-52 B-62

1.40 1.66 *9040 R2 18 B-42 B-52 B-621.80 2.15 9045 R2 18 B-42 B-52 B-62

75.0 5730 585

1.48

90.0 4780 488


67.0 6420 655

1.48

80.4 5350 546


60.0 7160 731

1.49

72.0 5970 609




B - 35





53.6 8020 819

1.22

64.3 6690 683


47.6 9020 921

1.50

57.1 7520 768

1.73 9045 R3 31.5 B-44 B-54 B-641.75 2.02 9050 R3 31.5 B-44 B-54 B-642.11 2.40 9055 R3 31.5 B-44 B-54 B-642.42 2.73 9065 R3 31.5 B-46 B-56 B-663.02 3.44 9070 R3 31.5 B-46 B-56 B-663.71 4.22 9075 R3 31.5 B-46 B-56 B-66

42.3 10170 1040

1.28

50.7 8480 865


37.5 11460 1170

1.06

45.0 9550 975


33.3 12890 1320

0.99

40.0 10740 1100


30.0 14330 1460

0.95

36.0 11940 1220


26.8 16040 1640

0.88

32.1 13370 1370


23.8 18050 1840

1.15

28. 6 15040 1540


21.1 20340 2080

0.93

25.4 16950 1730


18.8 22920 2340

0.93

22.5 19100 1950


16.7 25790 2630

0.82

20.0 21490 2190


15.0 28650 29300.82

18.0 23880 24401.00 9060 R4 100 B-50 B-60 B-70

1.44 1.73 9070 R4 100 B-50 B-60 B-702.20 2.51 9080 R4 100 B-50 B-60 B-70

13.4 32090 3280

0.83

16.1 26740 2730



B - 36

Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles





12.0 35810 3660

0.83

14.4 29840 3050


10.7 40110 4100

0.91

12.9 33430 3410


9.4 45840 46801.17

11.3 38200 39001.40 9075 R4 160 B-50 B-60 B-70

1.26 1.51 9080 R4 160 B-50 B-60 B-701.75 2.11 9085 R4 160 B-50 B-60 B-70

8.3 51570 52700.97

10.0 42980 43901.17 9075 R4 180 B-50 B-60 B-70

1.15 1.37 9080 R4 180 B-50 B-60 B-701.51 1.82 9085 R4 180 B-50 B-60 B-70

7.5 57300 5850 1.08 9.0 47750 4880 1.31 9080 R4 200 B-50 B-60 B-701.26 1.51 9085 R4 200 B-50 B-60 B-70

6.7 64180 6550 0.95 8.0 53480 5460 1.13 9080 R4 224 B-50 B-60 B-701.20 1.44 9085 R4 224 B-50 B-60 B-70

6.0 71630 7310 0.84 7.2 59690 6090 1.00 9080 R4 250 B-50 B-60 B-701.15 1.37 9085 R4 250 B-50 B-60 B-70

5.4 80220 8190 1.00 6.4 66850 6830 1.20 9085 R4 280 B-50 B-60 B-704.8 90250 9210 0.88 5.7 75210 7680 1.06 9085 R4 315 B-50 B-60 B-70


n1 r/min 1500 1800




Ratio Horizontal Vertical UprightNm kgf m Nm kgf m238 2210 225 2.50 286 1840 188 2.50 9040 R2 6.3 B-42 B-52 B-62211 2490 254 2.50 254 2070 212 2.50 *9040 R2 7.1 B-42 B-52 B-62

188 2800 2861.87

225 2330 2382.18 *9035 R2 8 B-42 B-52 B-62

2.25 2.50 *9040 R2 8 B-42 B-52 B-622.94 3.52 9045 R2 8 B-42 B-52 B-62

167 3150 322 2.25 200 2630 268 2.50 *9040 R2 9 B-42 B-52 B-622.94 3.52 9045 R2 9 B-42 B-52 B-62

150 3500 358 2.05 180 2920 298 2.32 *9040 R2 10 B-42 B-52 B-622.61 3.14 9045 R2 10 B-42 B-52 B-62

134 3920 400 2.05 161 3270 334 2.32 *9040 R2 11.2 B-42 B-52 B-622.61 3.14 9045 R2 11.2 B-42 B-52 B-62

120 4380 447 1.47 144 3650 372 1.76 *9040 R2 12.5 B-42 B-52 B-622.12 2.54 9045 R2 12.5 B-42 B-52 B-62

107 4900 501 1.47 129 4090 417 1.76 *9040 R2 14 B-42 B-52 B-622.12 2.54 9045 R2 14 B-42 B-52 B-62

93.8 5600 572 1.14 113 4670 477 1.36 *9040 R2 16 B-42 B-52 B-621.47 1.76 9045 R2 16 B-42 B-52 B-62

83.8 6300 644 1.47 100.0 5250 536 1.76 *9045 R2 18 B-42 B-52 B-62

75.0 7000 715

1.14

90.0 5840 596


67.0 7840 801

1.14

80.4 6540 667

1.36 *9045 R2 22.4 B-42 B-52 B-621.72 1.96 9050 R3 22.4 B-44 B-54 B-641.98 2.23 9060 R3 22.4 B-46 B-56 B-663.03 3.45 9070 R3 22.4 B-46 B-56 B-66

60.0 8750 8941.72

72.0 7300 7451.96 9055 R3 25 B-44 B-54 B-64

1.98 2.23 9060 R3 25 B-46 B-56 B-663.03 3.45 9070 R3 25 B-46 B-56 B-66

53.6 9800 10001.72

64.3 8170 8341.96 9055 R3 28 B-44 B-54 B-64

1.98 2.23 9060 R3 28 B-46 B-56 B-663.03 3.45 9070 R3 28 B-46 B-56 B-66



B - 37





47.6 11030 1130

1.72

57.1 9190 938


42.3 12430 1270

1.52

50.7 10360 1060


37.5 14010 14301.43

45.0 11670 11901.65 9055 R3 40 B-44 B-54 B-64

1.69 1.90 9060 R3 40 B-46 B-56 B-662.47 2.81 9070 R3 40 B-46 B-56 B-66

33.3 15760 1610

1.23

40.0 13130 1340


30.0 17510 1790

1.18

36.0 14590 1490


26.8 19610 2000

0.94

32.1 16340 1670


23.8 22060 2250

0.94

28.6 18380 1880


21.1 24860 2540

0.90

25.4 20720 2120


18.8 28010 2860

1.09

22.5 23340 2380


16.7 31520 3220

0.96

20.0 26260 2680


15.0 35020 3580 1.18 18.0 29180 2980 1.41 9070 R4 100 B-50 B-60 B-701.80 2.05 9080 R4 100 B-50 B-60 B-70

13.4 39220 4000

0.98

16.1 32680 3340


12.0 43770 4470

0.90

14.4 36480 3720


10.7 49020 50101.05

12.9 40850 41701.25 9075 R4 140 B-50 B-60 B-70

1.18 1.41 9080 R4 140 B-50 B-60 B-701.61 1.94 9085 R4 140 B-50 B-60 B-70

9.4 56030 57200.96

11.3 46690 47701.14 9075 R4 160 B-50 B-60 B-70

1.03 1.23 9080 R4 160 B-50 B-60 B-701.43 1.72 9085 R4 160 B-50 B-60 B-70

8.3 63030 6440 0.94 10.0 52530 5360 1.12 9080 R4 180 B-50 B-60 B-701.23 1.49 9085 R4 180 B-50 B-60 B-70

7.5 70030 7150 0.89 9.0 58360 5960 1.07 9080 R4 200 B-50 B-60 B-701.03 1.23 9085 R4 200 B-50 B-60 B-70

6.7 78440 8010 0.98 8.0 65360 6670 1.18 9085 R4 224 B-50 B-60 B-706.0 87540 8940 0.94 7.2 72950 7450 1.12 9085 R4 250 B-50 B-60 B-70


B - 38

Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

Sheet 1

Sheet 2

Applicable to configurations: Double Reduction RMR, LMLTriple Reduction RML,LMR/Quadruple Reduction RMR, LML

Applicable to configurations: Double Reduction RML, LMRTriple Reduction RMR, LML/Quadruple Reduction RML, LMR

L.SpeedShaft

Speedr/min

Size of Reducer

9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085250 17.7 29.4 29.9 32.4 37.8 46.6 39.7 49.1 44.1 77.0 77.0 100.1160 20.1 31.4 32.4 33.8 39.7 48.1 41.7 50.5 46.1 89.0 89.0 108.9100 25.0 35.3 38.7 39.2 47.1 53.5 47.6 54.4 54.4 99.0 99.0 122.1

63 26.5 35.3 42.2 47.1 54.9 62.3 58.9 64.3 65.2 131.5 131.5 125.640 26.5 35.3 42.2 49.1 54.9 67.7 71.1 78.0 79.0 141.0 141.0 125.125 26.5 35.3 42.2 49.1 54.9 67.7 81.4 95.2 99.1 139.5 139.5 122.6

250 71.1 93.7 70.1 122.5 122.5 141.8160 78.0 94.7 77.5 137.5 137.5 132.4100 81.4 98.1 92.2 149.5 149.5 127.0

63 81.4 98.1 114.8 149.0 149.0 125.640 81.4 98.1 117.7 148.5 148.5 125.125 81.4 98.1 117.7 147.0 147.0 122.6

L.SpeedShaft

Speedr/min

Size of Reducer

9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085250 9.8 21.6 19.1 21.6 22.6 31.4 16.7 28.4 17.2 44.0 44.0 58.4160 12.3 23.1 20.6 23.1 24.0 31.4 18.1 27.0 17.7 55.5 55.5 64.3100 16.7 29.4 26.0 27.5 28.4 35.3 22.1 30.4 25.5 63.5 63.5 74.6

63 21.6 35.3 32.9 35.3 37.3 42.7 33.4 38.3 33.8 95.0 95.0 104.540 26.5 35.3 41.7 43.7 48.6 55.4 45.1 51.5 47.6 129.0 129.0 146.725 26.5 35.3 42.2 49.1 54.9 67.7 60.8 68.7 67.7 167.0 167.0 171.2

250 46.1 74.6 40.2 90.0 90.0 114.8160 52.0 72.1 45.6 103.5 103.5 125.1100 60.3 79.0 59.4 116.0 116.0 140.8

63 81.4 96.6 80.0 152.5 152.5 174.140 81.4 98.1 108.9 192.0 192.0 191.825 81.4 98.1 117.7 180.5 180.5 171.2

L.SpeedShaft

Speedr/min

Size of Reducer

9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085250 14.7 23.1 26.5 31.4 32.9 31.9 27.0 43.2 28.0 28.0 23.5 23.5160 18.1 23.1 28.4 31.4 33.4 31.9 28.9 43.2 28.4 28.4 27.5 27.5100 24.5 23.1 32.9 31.4 37.3 31.9 34.3 43.2 39.7 39.7 32.9 32.9

63 26.5 23.1 32.9 31.4 37.3 31.9 49.1 43.2 52.5 52.5 45.6 45.640 26.5 23.1 32.9 31.4 37.3 31.9 49.1 43.2 61.4 61.4 63.3 60.325 26.5 23.1 32.9 31.4 37.3 31.9 49.1 43.2 61.4 61.4 67.7 60.3

250 23.1 34.8 18.6 18.6 56.9 56.9160 25.0 33.4 21.1 21.1 56.9 56.9100 29.4 36.8 27.5 27.5 56.9 56.9

63 39.2 43.2 36.3 36.3 56.9 56.940 39.2 43.2 49.1 49.1 56.9 56.925 39.2 43.2 56.9 56.9 56.9 56.9

SELECTION Drive Unit Allowable Radial and Axial Loads on Slow Speed Shaft

Standardbearingmodel

Heavyduty

bearingmodel


Heavyduty

bearingmodel

Allowable Axial Load (kN)

Allowable Radial Load (kN)


Heavyduty

bearingmodel

B - 39


RMB LMB

1

1

1

1

1

1

2

2

2

2

2

2

Triple Reduction

Ratio

Double Reduction

Ratio

Quadruple Reduction

Ratio

Notes 1 The value shown in the table is allowable radial load when

it is applied to the center of the solid shaft (except hollow shaft).

Consult us when a load is not in the center. 2. Consult us for the blanks in the table. 3. Consult us when the radial load is applied upward. 4. In case of double projection shaft (RMB, LMB)

(1) See sheet 1 when the radial load is applied only to the shaft 1.


(3) Consult us when the radial load is applied to both shafts.

Overhang FactorOverhang Member Overhang Factor

Sprocket (Single Row) 1Sprocket (Double Row) 1.25

Gears 1.25V Belt 1.5

Flat Belt 2.5

B - 40

Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

Sheet 1

Sheet 2

L.SpeedShaft

Speedr/min

Size of Reducer

9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085250 1800 3000 3050 3300 3850 4750 4050 5000 4500 7850 7850 10200160 2050 3200 3300 3450 4050 4900 4250 5150 4700 9050 9050 11100100 2550 3600 3950 4000 4800 5450 4850 5550 5550 10100 10100 12450

63 2700 3600 4300 4800 5600 6350 6000 6550 6650 13400 13400 1280040 2700 3600 4300 5000 5600 6900 7250 7950 8050 14350 14350 1275025 2700 3600 4300 5000 5600 6900 8300 9700 10100 14200 14200 12500

250 7250 9550 7150 12500 12500 14450160 7950 9650 7900 14000 14000 13500100 8300 10000 9400 15250 15250 12950

63 8300 10000 11700 15200 15200 1280040 8300 10000 12000 15150 15150 1275025 8300 10000 12000 15000 15000 12500

L.SpeedShaft

Speedr/min

Size of Reducer

9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085250 1000 2200 1950 2200 2300 3200 1700 2900 1750 4500 4500 5950160 1250 2350 2100 2350 2450 3200 1850 2750 1800 5650 5650 6550100 1700 3000 2650 2800 2900 3600 2250 3100 2600 6450 6450 7600

63 2200 3600 3350 3600 3800 4350 3400 3900 3450 9700 9700 1065040 2700 3600 4250 4450 4950 5650 4600 5250 4850 13150 13150 1495025 2700 3600 4300 5000 5600 6900 6200 7000 6900 17000 17000 17450

250 4700 7600 4100 9150 9150 11700160 5300 7350 4650 10550 10550 12750100 6150 8050 6050 11800 11800 14350

63 8300 9850 8150 15550 15550 1775040 8300 10000 11100 19550 19550 1955025 8300 10000 12000 18400 18400 17450

L.SpeedShaft

Speedr/min

Size of Reducer

9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085250 1500 2350 2700 3200 3350 3250 2750 4400 2850 2850 2400 2400160 1850 2350 2900 3200 3400 3250 2950 4400 2900 2900 2800 2800100 2500 2350 3350 3200 3800 3250 3500 4400 4050 4050 3350 3350

63 2700 2350 3350 3200 3800 3250 5000 4400 5350 5350 4650 465040 2700 2350 3350 3200 3800 3250 5000 4400 6260 6260 6450 615025 2700 2350 3350 3200 3800 3250 5000 4400 6260 6260 6900 6150

250 2350 3550 1900 1900 5800 5800160 2550 3400 2150 2150 5800 5800100 3000 3750 2800 2800 5800 5800

63 4000 4400 3700 3700 5800 580040 4000 4400 5000 5000 5800 580025 4000 4400 5800 5800 5800 5800

Applicable to configurations: Double Reduction RMR, LMLTriple Reduction RML,LMR/Quadruple Reduction RMR, LML

Applicable to configurations: Double Reduction RML, LMRTriple Reduction RMR, LML/Quadruple Reduction RML, LMR


Allowable Axial Load (kgf)

Allowable Radial Load (kgf)


Heavyduty

bearingmodel


Heavyduty

bearingmodel


Heavyduty

bearingmodel

B - 41



Consult us when a load is not in the center. 2. Consult us for the blanks in the table. 3. Consult us when the radial load is applied upward. 4. In case of double projection shaft (RMB, LMB)




RMB LMB

1

1

1

1

1

1

2

2

2

2

2

2

Triple Reduction

Ratio

DoubleReduction

Ratio

QuadrupleReduction

Ratio




Flat Belt 2.5


MA

MB

MC

B A

MD

KD

G Y GL

K4- J

E1F

HL

RC1

RC2

OP

EH

RC1

E2

FY

Location of oil fill and air vent changes for Size 9030 with reduction ratio 6.3 or 7.1. Refer to Fig. 1.

B - 42

RML RMR RMB LMR LML LMB

L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2

1. Key and keyways are based on ISO R773-1969 Close keys (JIS B1301-1996 Parallel key in fastening type)2. The oil quantity is approximate. Oil shall be supplied within the range shown on the oil gauge.

Slow Speed Shaft

Standard Shaft Arrangement Configuration

Solid Shaft Hollow Shaft (Shrink Disk Type) Hollow Shaft (Key Type)

Refer to the Page D-18 for details. Refer to the Page D-18 for details.

Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

DIMENSIONS Right Angle Double Reduction Horizontal Mounting 9030 9045

[Fig. 1] Location of oil fill and air vent for Size 9030 with reduction ratio 6.3 or 7.1

Size A B D E E1 E2 F FY G H J K L O P Y

9030

Seebelow

200 110 160 320 353 349 154 90 28 24 120 590 215 265 410

9035 219 129 185 370 399 154 90 28 24 120 640 215 265 460

9040 235 120 200 400 431 172 115 30 28 150 685 255 315 455

9045 256 141 220 440 471 172 115 30 28 150 745 255 315 515

Size RC1 RC2Oil Qty.(L)

Wt. (kg)※

5.5-30kW 37-55kW

9030 3/4" 3/4" 10 240 255

9035 3/4" 3/4" 12 260 275

9040 1" 1" 16 340 350

9045 1" 1" 18 400 410

kWMotor A Mass of Motor

MountingFlange (kg)

Mass of Motor (kg)Without Brake With Brake

MD 9030 9035 9040 9045 WithoutBrake

WithBtakeMA MB MC MA MB MC

11 480 251 350 575 251 350 188 540 571 11 76 9615 545 324 350 700 324 350 232 540 571 595 634 11 131 175

18.5 625 394 400 835 394 400 297 540 571 595 634 17 213 25822 625 394 400 835 394 400 297 540 571 595 634 17 213 25830 625 394 400 835 394 400 297 540 571 595 634 17 224 28037 715.5 394 450 930.5 394 450 297 570 601 625 664 15 259 32045 715.5 394 450 930.5 394 450 297 570 601 625 664 15 259 32055 769.5 484 550 412 601 625 664 29 276

SizeSolid Shaft Hollow Shaft (Shrink Disk Type) Hollow Shaft (Key Type)

TU1 T1 U1 V1 W1/DepthKey

TU2 T2 U2 V2 V3 TU4 T4 U4 V4 V5X1 Y1 Z1 L1

9030 330 160 170 80m6 M20/42 22 9 14 150 393 233 160 83 80 330 165 165 75 759035 330 160 170 90m6 M20/42 25 9 14 150 403 243 160 88 85 330 165 165 85 859040 349 179 170 95m6 M24/50 25 9 14 150 448 268 180 98 95 360 180 180 90 909045 391 181 210 105m6 M24/50 28 10 16 190 463 283 180 108 105 370 185 185 105 105

(blank)T

K

:Solid Shaft: Hollow Shaft

(Shrink Disk type): Hollow Shaft (Key type)

9030903590409045

RMLRMRRMBLMRLMLLMB

SizeShaft

Arrangement

Low Speed ShaftType

NominalReduction Ratio

B - 43

Air Vent Oil Fill Drain Plug Oil Gauge InspectionCover

Oil Pump OppositeSide

Backstop(Option)

Dip StickAir Breather

H

L

P H A R 2 - -

PH

AR

90309045

2PARAMAX

HorizontalMonoblock

Right AngleDouble

Reduction

Unit: mm

Size Nominal Reduction Ratio6.3 7.1 8 9 10 11.2 12.5 14 16 18 20 22.4

9030903590409045

DIMENSIONS Right Angle Double Reduction Horizontal Mounting 9030 9045

Nomenclature

*) Mass of drive unit with motor, add mass of motor flange and mass of motor, shown in table below.

OP

EH

MA

MB

MC

B A

MD

BDBH

KD

G Y GL

K4- J

E1F

HL

RC1

RC2

B - 44


L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2


Slow Speed Shaft




Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

DIMENSIONS Right Angle Triple Reduction Horizontal Mounting 9030 9055

Size A B D E E1 F G H J K L O P Y

9030

Seebelow

200 110 160 320 349 90 28 24 120 590 215 265 410

9035 219 129 185 370 399 90 28 24 120 640 215 265 460

9040 235 120 200 400 431 115 30 28 150 685 255 315 455

9045 256 141 220 440 471 115 30 28 150 745 255 315 515

9050 255 138.5 210 420 451 116.5 32 28 150 775 285 345 542

9055 286 171 245 490 521 115 32 28 150 845 285 345 615

Size BD BH RC1 RC2Oil Qty.(L)

Wt. (kg)※

5.5-30kW 37-55kW

9030 3/4" 3/4" 10 240 250

9035 3/4" 3/4" 12 260 270

9040 1" 1" 16 325 345

9045 1" 1" 18 385 405

9050 150 263 1" 1" 21 475 485

9055 150 263 1" 1" 28 535 545


MountingFlange (kg)


MD 9030 9035 9040 9045 9050 9055 WithoutBrake

WithBrakeMA MB MC MA MB MC

5.5 382 212 315 454 212 315 144 540 571 595 634 8 43 547.5 415 251 315 510 251 315 185 540 571 595 634 675 714 8 57 7711 480 251 350 575 251 350 188 540 571 595 634 675 714 11 76 9615 545 324 350 700 324 350 232 540 571 595 634 675 714 11 131 175

18.5 625 394 400 835 394 400 297 540 571 595 634 675 714 17 213 25822 625 394 400 835 394 400 297 540 571 595 634 675 714 17 213 25830 625 394 400 835 394 400 297 540 571 595 634 675 714 17 224 28037 715.5 394 450 930.5 394 450 297 601 625 664 705 744 15 259 32045 715.5 394 450 930.5 394 450 297 625 664 705 744 15 259 32055 769.5 484 550 412 705 744 29 276




9030 330 160 170 80m6 M20/42 22 9 14 150 393 233 160 83 80 330 165 165 75 759035 330 160 170 90m6 M20/42 25 9 14 150 403 243 160 88 85 330 165 165 85 859040 349 179 170 95m6 M24/50 25 9 14 150 448 268 180 98 95 360 180 180 90 909045 391 181 210 105m6 M24/50 28 10 16 190 463 283 180 108 105 370 185 185 105 1059050 411 201 210 110m6 M24/50 28 10 16 190 503 303 200 108 105 410 205 205 105 1059055 411 201 210 120m6 M24/50 32 11 18 185 528 323 205 123 120 410 205 205 115 115

Size Nominal Reduction Ratio20 22.4 25 28 31.5 35.5 40 45 50 56 63 71 80 90

903090359040904590509055

Nomenclature

903090359040904590509055

RMLRMRRMBLMRLMLLMB

SizeShaft

Arrangement

Low Speed ShaftType


(blank)T

K



(blank)B

: Without Option: With Backstop

Option

B - 45



Backstop(Option)


H

L

P H A R 3 - -

PH

AR

90309055

3PARAMAX

HorizontalMonoblock

Right AngleTriple

Reduction

Unit: mm



EH

OP G

KD

Y G

K

FE

1E

2

RC

L

4- J

MA

MB

B A

MC

MD

BDBH

B - 46


L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2


Slow Speed Shaft




Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles


Size A B D E E1 E2 F G H J K L O P Y

9060

Seebelow

299 151 265 530 158 578 135 35 35 180 885 310 380 615

9065 338 190 300 600 123 648 135 35 35 180 970 310 380 700

9070 336 163 300 600 183 648 160 40 42 215 1020 350 430 700

9075 383 210 335 670 148 718 160 52 42 220 1120 350 430 800

Size BD BH RCOil Qty.(L)

Wt. (kg)※

5.5-30kW 37-55kW

9060 175 308 1" 29 680 690

9065 175 308 1" 33 805 815

9070 190 330 1" 45 950 960

9075 190 330 1" 52 1200 1210


MountingFlange (kg)




11 480 251 350 575 251 350 188 744 790 11 76 9615 545 324 350 700 324 350 232 744 790 11 131 175

18.5 625 394 400 835 394 400 297 744 790 852 905 17 213 25822 625 394 400 835 394 400 297 744 790 852 905 17 213 25830 625 394 400 835 394 400 297 744 790 852 905 17 224 28037 715.5 394 450 930.5 394 450 297 774 790 882 935 15 259 32045 715.5 394 450 930.5 394 450 297 774 790 882 935 15 259 32055 769.5 484 550 412 774 790 882 935 29 276




9060 440 230 210 125m6 M24/50 32 11 18 185 583 353 230 128 125 470 235 235 125 1239065 484 234 250 140m6 M30/60 36 12 20 225 594 359 235 143 140 480 240 240 145 1439070 509 259 250 145m6 M30/60 36 12 20 225 644 384 260 148 145 530 265 265 145 1439075 562 262 300 160m6 M30/60 40 13 22 275 651 386 265 158 155 530 265 265 150 148


9060906590709075

NomenclatureOption

B - 47



Backstop(Option)


H

L

P H D R 3 - 　　 -

PH

DR

90609075

3PARAMAX

HorizontalSplit

Right AngleTriple

Reduction

Unit: mm

9060906590709075

RMLRMRRMBLMRLMLLMB


SizeShaft

Arrangement

Low Speed ShaftType



(blank)T

K



(blank)B


AB MA

MB

MC

MD

BDBH

EHOP

HL

D

F

GL

G

4- JKK

E1

Y

RC1

RC2

B - 48


L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2


Slow Speed Shaft




Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

DIMENSIONS Right Angle Quadruple Reduction Horizontal Mounting 9040 9055

Nomenclature

B - 49



Backstop(Option)


H

L


9040

Seebelow

235 120 200 400 431 115 30 28 150 759 255 315 529

9045 256 141 220 440 471 115 30 28 150 819 255 315 589

9050 255 138.5 210 420 451 116.5 32 28 150 848 285 345 615

9055 286 171 245 490 521 115 32 28 150 918 285 345 688

Size BD BH RC1 RC2Oil Qty.(L)

Wt. (kg)※

5.5-30kW 37-55kW

9040 1" 1" 19 355 365

9045 1" 1" 21 425 435

9050 150 263 1" 1" 24 490 500

9055 150 263 1" 1" 29 550 560


MountingFlange (kg)




5.5 382 212 315 454 212 315 144 674 713 743 782 8 43 547.5 415 251 315 510 251 315 185 674 713 743 782 8 57 7711 480 251 350 575 251 350 188 674 713 743 782 11 76 9615 545 324 350 700 324 350 232 674 713 743 782 11 131 175

18.5 625 394 400 835 394 400 297 674 713 743 782 17 213 25822 625 394 400 835 394 400 297 674 713 743 782 17 213 25830 625 394 400 835 394 400 297 743 782 17 224 280




9040 349 179 170 95m6 M24/50 25 9 14 150 448 268 180 98 95 360 180 180 90 909045 391 181 210 105m6 M24/50 28 10 16 190 463 283 180 108 105 370 185 185 105 1059050 411 201 210 110m6 M24/50 28 10 16 190 503 303 200 108 105 410 205 205 105 1059055 411 201 210 120m6 M24/50 32 11 18 185 528 323 205 123 120 410 205 205 115 115

PH

AR

90409055

4PARAMAX

HorizontalMonoblock

Right AngleQuadruple Reduction

Unit: mm

Size Nominal Reduction Ratio80 90 100 112 125 140 160 180 200 224 250 280 315 355 400 450

9040904590509055

P H A R 4 - -

9040904590509055

RMLRMRRMBLMRLMLLMB


SizeShaft

Arrangement

Low Speed ShaftType



(blank)T

K



(blank)B


Option

EH

OP

KD

G Y GL

K4- J

F E1

E2

RC

AB MA

MB

MC

MD

BDBH

B - 50


L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2


Slow Speed Shaft




Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles


B - 51



Backstop(Option)


H

L

Size A B D E E1 E2 F G H J K L O P Y

9060

Seebelow

299 151 265 530 121 578 135 35 35 180 970 310 380 700

9065 338 190 300 600 86 648 135 35 35 180 1055 310 380 785

9070 336 163 300 600 140 648 160 40 42 215 1115 350 430 795

9075 383 210 335 670 105 718 160 52 42 220 1215 350 430 895

9080 378 205 335 670 162 718 160 52 42 220 1275 380 460 955

9085 422 249 375 750 122 798 160 52 42 220 1375 380 460 1055

Size BD BH RCOil Qty.(L)

Wt. (kg)※

5.5-30kW 37-55kW

9060 175 308 1" 38 700 710

9065 175 308 1" 43 855 865

9070 190 330 1" 57 990 1000

9075 190 330 1" 67 1210 1220

9080 210 365 1" 73 1410 1420

9085 210 365 1" 90 1670 1680


MountingFlange (kg)


MD 9060 9065 9070 9075 9080 9085 WithoutBrake


5.5 382 212 315 454 212 315 144 829 875 947 1000 1055 1111 8 43 547.5 415 251 315 510 251 315 185 829 875 947 1000 1055 1111 8 57 7711 480 251 350 575 251 350 188 829 875 947 1000 1055 1111 11 76 9615 545 324 350 700 324 350 232 829 875 947 1000 1055 1111 11 131 175

18.5 625 394 400 835 394 400 297 829 875 947 1000 1055 1111 17 213 25822 625 394 400 835 394 400 297 829 875 947 1000 1055 1111 17 213 25830 625 394 400 835 394 400 297 829 875 947 1000 1055 1111 17 224 28037 715.5 394 450 930.5 394 450 297 859 905 977 1030 1085 1141 15 259 32045 715.5 394 450 930.5 394 450 297 859 905 977 1030 1085 1141 15 259 32055 769.5 484 550 412 977 1030 1085 1141 29 276




9060 440 230 210 125m6 M24/50 32 11 18 185 583 353 230 128 125 470 235 235 125 1239065 484 234 250 140m6 M30/60 36 12 20 225 594 359 235 143 140 480 240 240 145 1439070 509 259 250 145m6 M30/60 36 12 20 225 644 384 260 148 145 530 265 265 145 1439075 562 262 300 160m6 M30/60 40 13 22 275 651 386 265 158 155 530 265 265 150 1489080 582 282 300 165m6 M30/60 40 13 22 275 714 429 285 173 170 570 285 285 165 1639085 585 285 300 175m6 M30/60 45 15 25 270 714 429 285 183 180 570 285 285 175 173

PH

DR

90609085

4PARAMAX

HorizontalSplit


Size Nominal Reduction Ratio80 90 100 112 125 140 160 180 200 224 250 260 280 315 355 400 450

906090659070907590809085

P H D R 4 - - Size

ShaftArrangement

Low Speed ShaftType

906090659070907590809085

RMLRMRRMBLMRLMLLMB

NomenclatureUnit: mm




(blank)T

K



(blank)B


Option

E2E3

MD

C1

RC1

MM

OE1

RC2

4- JK K

LDG GY

RI

N

HP

P

HL

NP

AB

N1

MA

MB

MC

N2

B - 52

L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2


RML RMR


Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

Slow Speed Shaft



DIMENSIONS Right Angle Double Reduction Vertical Mounting 9030 9045


9030903590409045

B - 53

H

L



Backstop(Option)


P V A R 2 - -

PV

AR

90309045

2PARAMAX

VerticalMonoblock

Right AngleDouble

Reduction

9030903590409045

RMLRMR

Size A B C1 D E1 E2 E3 G H RI J K L M N N1 N2 NP O P Y

9030

Seebelow

200 155 175 320 220 160 25 50 105 24 120 590 85 221 22 9 117 270 132.5 365

9035 219 186 194 370 245 185 25 50 120 24 120 640 100 221 22 9 117 320 132.5 396

9040 235 180 205 400 260 200 30 60 120 28 150 685 100 239 15 2 117 340 157.5 420

9045 256 219 266 440 266 220 30 60 140 28 150 745 120 243 17.5 2 117 380 157.5 459


Wt. (kg)※

5.5-30kW 37-55kW

9030 3/4" 3/4" 7 240 255

9035 3/4" 3/4" 9 260 275

9040 1" 1" 19 340 350

9045 1" 1" 23 400 410


MountingFlange (kg)




11 480 251 350 575 251 350 188 540 571 11 76 9615 545 324 350 700 324 350 232 540 571 595 634 11 131 175

18.5 625 394 400 835 394 400 297 540 571 595 634 17 213 25822 625 394 400 835 394 400 297 540 571 595 634 17 213 25830 625 394 400 835 394 400 297 540 571 595 634 17 224 28037 715.5 394 450 930.5 394 450 297 570 601 625 664 15 259 32045 715.5 394 450 930.5 394 450 297 570 601 625 664 15 259 32055 769.5 484 550 412 601 625 664 29 276




9030 330 160 170 80m6 M20/42 22 9 14 150 393 233 160 83 80 330 165 165 75 759035 330 160 170 90m6 M20/42 25 9 14 150 403 243 160 88 85 330 165 165 85 859040 349 179 170 95m6 M24/50 25 9 14 150 448 268 180 98 95 360 180 180 90 909045 391 181 210 105m6 M24/50 28 10 16 190 463 283 180 108 105 370 185 185 105 105

Unit: mm

Nomenclature

DIMENSIONS Right Angle Double Reduction Vertical Mounting 9030 9045

SizeShaft

Arrangement

Low Speed ShaftType



(blank)T

K



E2E3

MD

C1

RC1

MM

OE1

RC24- JK K

LDG GY

RI

AB

MC

NP

HP

P

NN1

MA

MB

HL

N2

B - 54

L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2


RML RMR


Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

Slow Speed Shaft



DIMENSIONS Right Angle Triple Reduction Vertical Mounting 9030 9055


903090359040904590509055

Size A B C1 D E1 E2 E3 G H RI J K L M N N1 N2 NP O P Y

9030

Seebelow

200 264 175 320 220 160 25 50 105 24 120 590 85 211 22 9 100 270 132.5 365

9035 219 295 194 370 245 185 25 50 120 24 120 640 100 211 22 9 100 320 132.5 396

9040 235 306 205 400 260 200 30 60 120 28 150 685 100 239 15 2 117 340 157.5 420

9045 256 345 226 440 266 220 30 60 140 28 150 745 120 239 17.5 2 117 380 157.5 459

9050 255 358 225 420 270 210 30 60 140 28 150 775 110 259 23 7 117 360 172.5 490

9055 286 397 256 490 305 245 30 60 155 28 150 845 135 259 23 7 117 430 172.5 529


Wt. (kg)※

5.5-30kW 37-55kW

9030 3/4" 3/4" 9 240 250

9035 3/4" 3/4" 12 260 270

9040 1" 1" 18 325 345

9045 1" 1" 22 385 405

9050 1" 1" 21 475 485

9055 1" 1" 30 535 545


MountingFlange (kg)


MD 9030 9035 9040 9045 9050 9055 WithoutBrake


5.5 382 212 315 454 212 315 144 540 571 595 634 8 43 547.5 415 251 315 510 251 315 185 540 571 595 634 675 714 8 57 7711 480 251 350 575 251 350 188 540 571 595 634 675 714 11 76 9615 545 324 350 700 324 350 232 540 571 595 634 675 714 11 131 175

18.5 625 394 400 835 394 400 297 540 571 595 634 675 714 17 213 25822 625 394 400 835 394 400 297 540 571 595 634 675 714 17 213 25830 625 394 400 835 394 400 297 540 571 595 634 675 714 17 224 28037 715.5 394 450 930.5 394 450 297 601 625 664 705 744 15 259 32045 715.5 394 450 930.5 394 450 297 625 664 705 744 15 259 32055 769.5 484 550 412 705 744 29 276




9030 330 160 170 80m6 M20/42 22 9 14 150 393 233 160 83 80 330 165 165 75 759035 330 160 170 90m6 M20/42 25 9 14 150 403 243 160 88 85 330 165 165 85 859040 349 179 170 95m6 M24/50 25 9 14 150 448 268 180 98 95 360 180 180 90 909045 391 181 210 105m6 M24/50 28 10 16 190 463 283 180 108 105 370 185 185 105 1059050 411 201 210 110m6 M24/50 28 10 16 190 503 303 200 108 105 410 205 205 105 1059055 411 201 210 120m6 M24/50 32 11 18 185 528 323 205 123 120 410 205 205 115 115

B - 55

H

L



Backstop(Option)


P V A R 3 - -

Unit: mm

903090359040904590509055

RMLRMR

PV

AR

90309055

3PARAMAX

VerticalMonoblock

Right AngleTriple

Reduction

Nomenclature


SizeShaft

Arrangement

Low Speed ShaftType



(blank)T

K



E3 E2

HP

1P

P

NPN

1

AB

N

MA

MB

MC

MD

4- J

RC1

MM

OE1

K K

LDG GYRC2

RI

C1

B - 56

L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2


RML RMR


Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

Slow Speed Shaft



3. Shaft arrangement RMR is equipped with visible gauge. Refer to page D-28.



9060906590709075

Nomenclature

B - 57

H

L



Backstop(Option)


Size A B C1 D E1 E2 E3 G H RI J K L M N N1 NP O P P1 Y

9060

Seebelow

299 414 251 530 282 265 35 35 160 35 180 885 140 277.5 35 117 460 190 213 564

9065 338 460 290 600 317 300 35 35 175 35 180 970 175 277.5 38 117 530 190 213 610

9070 336 482 283 600 317 300 40 40 175 42 215 1020 155 304 38 117 520 215 233 657

9075 383 535 330 670 352 355 40 52 190 42 220 1120 195 304 40 117 590 215 233 710


Wt. (kg)※

5.5-30kW 37-55kW

9060 1" 1" 28 680 690

9065 1" 1" 35 805 815

9070 1" 1" 46 950 960

9075 1" 1" 59 1200 1210


MountingFlange (kg)




11 480 251 350 575 251 350 188 744 790 11 76 9615 545 324 350 700 324 350 232 744 790 11 131 175

18.5 625 394 400 835 394 400 297 744 790 852 905 17 213 25822 625 394 400 835 394 400 297 744 790 852 905 17 213 25830 625 394 400 835 394 400 297 744 790 852 905 17 224 28037 715.5 394 450 930.5 394 450 297 774 790 882 935 15 259 32045 715.5 394 450 930.5 394 450 297 774 790 882 935 15 259 32055 769.5 484 550 412 774 790 882 935 29 276




9060 440 230 210 125m6 M24/50 32 11 18 185 583 353 230 128 125 470 235 235 125 1239065 484 234 250 140m6 M30/60 36 12 20 225 594 359 235 143 140 480 240 240 145 1439070 509 259 250 145m6 M30/60 36 12 20 225 644 384 260 148 145 530 265 265 145 1439075 562 262 300 160m6 M30/60 40 13 22 275 651 386 265 158 155 530 265 265 150 148

P V D R 3 - -

PV

DR

90609075

3PARAMAX

VerticalSplit

Right AngleTriple

Reduction

Unit: mm

9060906590709075

RMLRMR


SizeShaft

Arrangement

Low Speed ShaftType



(blank)T

K



E3 E2

HP

1P

P

NPN

1

AB

N

MA

MB

MC

MD

4- J

RC1

MM

OE1

K K

LDG GYRC2

RI

C1

B - 58

L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2


LMR LML


Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

Slow Speed Shaft



DIMENSIONS Right Angle Quadruple Reduction Vertical Mounting 9040 9055

B - 59

H

L



Backstop(Option)


Size A B C1 D E1 E2 E3 G H RI J K L M1 M2 N N1 NP O P Y

9040

Seebelow

235 398 205 400 260 200 30 60 120 28 150 759 100 70 228.5 15 100 340 157.5 494

9045 256 437 226 440 277 220 30 60 140 28 150 819 120 90 228.5 17.5 100 380 157.5 533

9050 255 467 225 420 270 210 30 60 140 28 150 848 110 83 248.5 23 100 360 172.5 563

9055 286 506 256 490 305 245 30 60 155 28 150 918 135 118 248.5 23 100 430 172.5 602


Wt. (kg)※

5.5-30kW 37-55kW

9040 1" 1" 18 355 365

9045 1" 1" 22 425 435

9050 1" 1" 24 490 500

9055 1" 1" 34 550 560


MountingFlange (kg)




5.5 382 212 315 454 212 315 144 674 713 743 782 8 43 547.5 415 251 315 510 251 315 185 674 713 743 782 8 57 7711 480 251 350 575 251 350 188 674 713 743 782 11 76 9615 545 324 350 700 324 350 232 674 713 743 782 11 131 175

18.5 625 394 400 835 394 400 297 674 713 743 782 17 213 25822 625 394 400 835 394 400 297 674 713 743 782 17 213 25830 625 394 400 835 394 400 297 743 782 17 224 280




9040 349 179 170 95m6 M24/50 25 9 14 150 448 268 180 98 95 360 180 180 90 909045 391 181 210 105m6 M24/50 28 10 16 190 463 283 180 108 105 370 185 185 105 1059050 411 201 210 110m6 M24/50 28 10 16 190 503 303 200 108 105 410 205 205 105 1059055 411 201 210 120m6 M24/50 32 11 18 185 528 323 205 123 120 410 205 205 115 115

PV

AR

90409055

4PARAMAX

VerticalMonoblock


Unit: mm

Nomenclature

P V A R 4 - -


9040904590509055

9040904590509055

LMRLML


SizeShaft

Arrangement

Low Speed ShaftType



(blank)T

K



E3 E2

4- J

C1

M1

M1

OE1

KG D Y G

K

L

RI

RC1

RC2

M2

MD

N

AB

PP H

NP

N1

P1

MA

MB

MC

B - 60

L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2


LMR LML


Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

Slow Speed Shaft




3. Shaft arrangement LMR is equipped with visible gauge. Refer to page D-28.

B - 61

H

L



Backstop(Option)


Size A B C1 D E1 E2 E3 G H RI J K L M1 M2 N NP N1 O P P1 Y

9060

Seebelow

299 540 251 530 282 265 35 35 160 35 180 970 140 118 277.5 117 35 460 190 203 649

9065 338 586 290 600 317 300 35 35 175 35 180 1055 175 153 277.5 117 38 530 190 203 695

9070 336 630 283 600 317 300 40 40 175 42 215 1115 155 128 304 117 38 520 215 233 752

9075 383 683 330 670 352 335 40 52 190 42 220 1215 195 163 304 117 40 590 215 233 805

9080 378 725 325 670 352 335 40 52 190 42 220 1275 170 140 322.5 117 45 590 230 263 870

9085 422 781 369 750 392 375 40 52 215 42 220 1375 210 180 322.5 117 40 670 230 263 926


Wt. (kg)※

5.5-30kW 37-55kW

9060 1" 1" 36 700 710

9065 1" 1" 45 855 865

9070 1" 1" 54 990 1000

9075 1" 1" 68 1210 1220

9080 1" 1" 69 1410 1420

9085 1" 1" 94 1670 1680


MountingFlange (kg)


MD 9060 9065 9070 9075 9080 9085 WithoutBrake


5.5 382 212 315 454 212 315 144 829 875 947 1000 1055 1111 8 43 547.5 415 251 315 510 251 315 185 829 875 947 1000 1055 1111 8 57 7711 480 251 350 575 251 350 188 829 875 947 1000 1055 1111 11 76 9615 545 324 350 700 324 350 232 829 875 947 1000 1055 1111 11 131 175

18.5 625 394 400 835 394 400 297 829 875 947 1000 1055 1111 17 213 25822 625 394 400 835 394 400 297 829 875 947 1000 1055 1111 17 213 25830 625 394 400 835 394 400 297 829 875 947 1000 1055 1111 17 224 28037 715.5 394 450 930.5 394 450 297 859 875 977 1030 1085 1141 15 259 32045 715.5 394 450 930.5 394 450 297 859 875 977 1030 1085 1141 15 259 32055 769.5 484 550 412 977 1030 1085 1141 29 276




9060 440 230 210 125m6 M24/50 32 11 18 185 583 353 230 128 125 470 235 235 125 1239065 484 234 250 140m6 M30/60 36 12 20 225 594 359 235 143 140 480 240 240 145 1439070 509 259 250 145m6 M30/60 36 12 20 225 644 384 260 148 145 530 265 265 145 1439075 562 262 300 160m6 M30/60 40 13 22 275 651 386 265 158 155 530 265 265 150 1489080 582 282 300 165m6 M30/60 40 13 22 275 714 429 285 173 170 570 285 285 165 1639085 585 285 300 175m6 M30/60 45 15 25 270 714 429 285 183 180 570 285 285 175 173

PV

DR

90609085

4PARAMAX

VerticalSplit


Unit: mm



906090659070907590809085

P V D R 4 - -

906090659070907590809085

LMRLML

Nomenclature


SizeShaft

Arrangement

Low Speed ShaftType


(blank)T

K



Y3

BA

Y1

PK2 K2

MA

MB

MC

MD

H2

E

RC1

K3

DG

Y4

GL

K34-

J2

F

HL

K1

E1Y2

K14- J1

H1

RC2

B - 62


L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2



Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

Slow Speed Shaft



DIMENSIONS Right Angle Double Reduction Upright Mounting 9030 9045


9030903590409045

B - 63

H

L



Backstop(Option)


Size A B D E E1 F G H1 H2 J1 J2 K1 K2 K3 L P Y1 Y2 Y3 Y4

9030

Seebelow

200 110 160 320 348 90 60 28 24 24 85 50 120 590 265 215 200 215 410

9035 219 129 185 370 398 90 60 28 24 24 100 50 120 640 265 215 250 215 460

9040 235 120 200 400 430 115 75 30 28 28 100 60 150 685 315 255 260 255 455

9045 256 141 220 440 470 115 75 30 28 28 120 60 150 745 315 255 300 255 515


Wt. (kg)※

5.5-30kW 37-55kW

9030 3/4" 3/4" 14 240 255

9035 3/4" 3/4" 19 260 275

9040 1" 1" 24 340 350

9045 1" 1" 30 400 410


MountingFlange (kg)




11 480 251 350 575 251 350 188 540 571 11 76 9615 545 324 350 700 324 350 232 540 571 595 634 11 131 175

18.5 625 394 400 835 394 400 297 540 571 595 634 17 213 25822 625 394 400 835 394 400 297 540 571 595 634 17 213 25830 625 394 400 835 394 400 297 540 571 595 634 17 224 28037 715.5 394 450 930.5 394 450 297 570 601 625 664 15 259 32045 715.5 394 450 930.5 394 450 297 570 601 625 664 15 259 32055 769.5 484 550 412 601 625 664 29 276




9030 330 160 170 80m6 M20/42 22 9 14 150 393 233 160 83 80 330 165 165 75 759035 330 160 170 90m6 M20/42 25 9 14 150 403 243 160 88 85 330 165 165 85 859040 349 179 170 95m6 M24/50 25 9 14 150 448 268 180 98 95 360 180 180 90 909045 391 181 210 105m6 M24/50 28 10 16 190 463 283 180 108 105 370 185 185 105 105

P W A R 2 - -

PW

AR

90309045

2PARAMAX

UprightMonoblock

Right AngleDouble

Reduction

Unit: mm

9030903590409045

RMLRMRRMBLMRLMLLMB

Nomenclature

DIMENSIONS Right Angle Double Reduction Upright Mounting 9030 9045

SizeShaft

Arrangement

Low Speed ShaftType



(blank)T

K



Y3

MD

BA

Y1

PK2 K2

MA

MB

MCRC1

K3

DG

Y4

GL

K34-

J2

F

HL

RC2K1

E1Y2

K14- J1

H1

H2

E

B - 64


L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2



Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

Slow Speed Shaft



DIMENSIONS Right Angle Triple Reduction Upright Mounting 9030 9055


903090359040904590509055

903090359040904590509055

RMLRMRRMBLMRLMLLMB


9030

Seebelow

200 110 160 320 348 90 60 28 24 24 85 50 120 590 265 215 200 215 410

9035 219 129 185 370 398 90 60 28 24 24 100 50 120 640 265 215 250 215 460

9040 235 120 200 400 430 115 75 30 28 28 100 60 150 685 315 255 260 255 455

9045 256 141 220 440 470 115 75 30 28 28 120 60 150 745 315 255 300 255 515

9050 255 138.5 210 420 450 116.5 75 32 28 28 110 60 150 775 345 285 280 285 542

9055 286 171 245 490 520 115 75 32 28 28 130 60 150 845 345 285 350 285 615


Wt. (kg)※

5.5-30kW 37-55kW

9030 3/4" 3/4" 16 240 250

9035 3/4" 3/4" 21 260 270

9040 1" 1" 29 325 345

9045 1" 1" 36 385 405

9050 1" 1" 35 475 485

9055 1" 1" 46 535 545


MountingFlange (kg)


MD 9030 9035 9040 9045 9050 9055 WithoutBrake


5.5 382 212 315 454 212 315 144 540 571 595 634 8 43 547.5 415 251 315 510 251 315 185 540 571 595 634 675 714 8 57 7711 480 251 350 575 251 350 188 540 571 595 634 675 714 11 76 9615 545 324 350 700 324 350 232 540 571 595 634 675 714 11 131 175

18.5 625 394 400 835 394 400 297 540 571 595 634 675 714 17 213 25822 625 394 400 835 394 400 297 540 571 595 634 675 714 17 213 25830 625 394 400 835 394 400 297 540 571 595 634 675 714 17 224 28037 715.5 394 450 930.5 394 450 297 601 625 664 705 744 15 259 32045 715.5 394 450 930.5 394 450 297 625 664 705 744 15 259 32055 769.5 484 550 412 705 744 29 276




9030 330 160 170 80m6 M20/42 22 9 14 150 393 233 160 83 80 330 165 165 75 759035 330 160 170 90m6 M20/42 25 9 14 150 403 243 160 88 85 330 165 165 85 859040 349 179 170 95m6 M24/50 25 9 14 150 448 268 180 98 95 360 180 180 90 909045 391 181 210 105m6 M24/50 28 10 16 190 463 283 180 108 105 370 185 185 105 1059050 411 201 210 110m6 M24/50 28 10 16 190 503 303 200 108 105 410 205 205 105 1059055 411 201 210 120m6 M24/50 32 11 18 185 528 323 205 123 120 410 205 205 115 115

SizeShaft

Arrangement

Low Speed ShaftType


(blank)T

K



B - 65

H

L



Backstop(Option)


P W A R 3 - -

PW

AR

90309055

3PARAMAX

UprightMonoblock

Right AngleTriple

Reduction

Unit: mm

Nomenclature



MDB

AMB

MA

MC

HL

P

GKD

YGK4- J

FE1

RC2

L

RC1

HE O

B - 66


L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2



Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

Slow Speed Shaft





9060906590709075

B - 67

H

L



Backstop(Option)



9060

Seebelow

299 151 265 530 577 135 35 35 180 885 310 380 615

9065 338 190 300 600 647 135 35 35 180 975 310 380 700

9070 336 163 300 600 647 160 40 42 215 1020 350 430 700

9075 383 210 355 670 717 160 52 42 220 1120 350 430 800


Wt. (kg)※

5.5-30kW 37-55kW

9060 1" 1" 56 680 690

9065 1" 1" 65 805 815

9070 1" 1" 83 950 960

9075 1" 1" 100 1200 1210


MountingFlange (kg)




11 480 251 350 575 251 350 188 744 790 11 76 9615 545 324 350 700 324 350 232 744 790 11 131 175

18.5 625 394 400 835 394 400 297 744 790 852 905 17 213 25822 625 394 400 835 394 400 297 744 790 852 905 17 213 25830 625 394 400 835 394 400 297 744 790 852 905 17 224 28037 715.5 394 450 930.5 394 450 297 774 820 882 935 15 259 32045 715.5 394 450 930.5 394 450 297 774 820 882 935 15 259 32055 769.5 484 550 412 774 820 882 935 29 276




9060 440 230 210 125m6 M24/50 32 11 18 185 583 353 230 128 125 470 235 235 125 1239065 484 234 250 140m6 M30/60 36 12 20 225 594 359 235 143 140 480 240 240 145 1439070 509 259 250 145m6 M30/60 36 12 20 225 644 384 260 148 145 530 265 265 145 1439075 562 262 300 160m6 M30/60 40 13 22 275 651 386 265 158 155 530 265 265 150 148

P W D R 3 W - -

PW

DR

90609075

3PARAMAX

UprightSplit

Right AngleTriple

Reduction

WW

all Mount

Unit: mm

9060906590709075

RMLRMRRMBLMRLMLLMB

Nomenclature


SizeShaft

Arrangement

Low Speed ShaftType



(blank)T

K



Y3

MD

BA

Y1

PK2 K2

MA

MB

MC

HL

DG

LG4-

J2

K3

K3

Y4

H1

RC1

F

RC2K1

E1Y2

K14- J1 H2

E

B - 68


L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2



Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

Slow Speed Shaft



DIMENSIONS Right Angle Quadruple Reduction Upright Mounting 9040 9055

SizeShaft

Arrangement

Low Speed ShaftType


B - 69

H

L



Backstop(Option)



9040

Seebelow

235 120 200 400 430 115 75 30 28 28 100 60 150 759 315 255 260 255 529

9045 256 141 220 440 470 115 75 30 28 28 120 60 150 819 315 255 300 255 589

9050 255 138.5 210 420 450 116.5 75 32 28 28 110 60 150 848 345 285 280 285 615

9055 286 171 245 490 520 115 75 32 28 28 130 60 150 918 345 285 350 285 688


Wt. (kg)※

5.5-30kW 37-55kW

9040 1" 1" 35 355 365

9045 1" 1" 43 425 435

9050 1" 1" 46 490 500

9055 1" 1" 59 550 560


MountingFlange (kg)




5.5 382 212 315 454 212 315 144 674 713 743 782 8 43 547.5 415 251 315 510 251 315 185 674 713 743 782 8 57 7711 480 251 350 575 251 350 188 674 713 743 782 11 76 9615 545 324 350 700 324 350 232 674 713 743 782 11 131 175

18.5 625 394 400 835 394 400 297 674 713 743 782 17 213 25822 625 394 400 835 394 400 297 674 713 743 782 17 213 25830 625 394 400 835 394 400 297 743 782 17 224 280




9040 349 179 170 95m6 M24/50 25 9 14 150 448 268 180 98 95 360 180 180 90 909045 391 181 210 105m6 M24/50 28 10 16 190 463 283 180 108 105 370 185 185 105 1059050 411 201 210 110m6 M24/50 28 10 16 190 503 303 200 108 105 410 205 205 105 1059055 411 201 210 120m6 M24/50 32 11 18 185 528 323 205 123 120 410 205 205 115 115


9040904590509055

9040904590509055

RMLRMRRMBLMRLMLLMB

P W A R 4 - -

PW

AR

90409055

4PARAMAX

UprightMonoblock


Unit:

Nomenclature



(blank)T

K



MD

AB

HL

P

MB

MA

MC

HE

KD

GY

GL

K4- J

FE1RC2

RC1

O

B - 70


L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2



Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

Slow Speed Shaft




B - 71

H

L



Backstop(Option)



906090659070907590809085

906090659070907590809085

RMLRMRRMBLMRLMLLMB

P W D R 4 W - -

PW

DR

90609085

4PARAMAX

UprightSplit


WW

all Mount

Unit: mm


9060

Seebelow

299 151 265 530 577 135 35 35 180 970 310 380 700

9065 338 190 300 600 648 135 35 35 180 1055 310 380 785

9070 336 163 300 600 648 160 40 42 215 1115 350 430 795

9075 383 210 335 670 717 160 52 42 220 1215 350 430 895

9080 378 205 335 670 717 160 52 42 220 1275 380 460 955

9085 422 249 375 750 797 160 52 42 220 1375 380 460 1055


Wt. (kg)※

5.5-30kW 37-55kW

9060 1" 1" 68 700 710

9065 1" 1" 85 855 865

9070 1" 1" 107 990 1000

9075 1" 1" 122 1210 1220

9080 1" 1" 128 1410 1420

9085 1" 1" 174 1670 1680


MountingFlange (kg)

Mass of Motor (kg)Without Brake Brake

MD 9060 9065 9070 9075 9080 9085 WithoutBrake


5.5 382 212 315 454 212 315 144 829 875 947 1000 1055 1111 8 43 547.5 415 251 315 510 251 315 185 829 875 947 1000 1055 1111 8 57 7711 480 251 350 575 251 350 188 829 875 947 1000 1055 1111 11 76 9615 545 324 350 700 324 350 232 829 875 947 1000 1055 1111 11 131 175

18.5 625 394 400 835 394 400 297 829 875 947 1000 1055 1111 17 213 25822 625 394 400 835 394 400 297 829 875 947 1000 1055 1111 17 213 25830 625 394 400 835 394 400 297 829 875 947 1000 1055 1111 17 224 28037 715.5 394 450 930.5 394 450 297 859 905 977 1030 1085 1141 15 259 32045 715.5 394 450 930.5 394 450 297 859 905 977 1030 1085 1141 15 259 32055 769.5 484 550 412 977 1030 1085 1141 29 276




9060 440 230 210 125m6 M24/50 32 11 18 185 583 353 230 128 125 470 235 235 125 1239065 484 234 250 140m6 M30/60 36 12 20 225 594 359 235 143 140 480 240 240 145 1439070 509 259 250 145m6 M30/60 36 12 20 225 644 384 260 148 145 530 265 265 145 1439075 562 262 300 160m6 M30/60 40 13 22 275 651 386 265 158 155 530 265 265 150 1489080 582 282 300 165m6 M30/60 40 13 22 275 714 429 285 173 170 570 285 285 165 1639085 585 285 300 175m6 M30/60 45 15 25 270 714 429 285 183 180 570 285 285 175 173


Nomenclature


SizeShaft

Arrangement

Low Speed ShaftType


(blank)T

K



B - 72

memo

B

Drive Unit: Parallel Shaft

Selection Tables B- 74 Allowable Radial and Axial Loads B- 98Dimension Tables B-102Actual Reduction Ratio B-111

<Drive Unit Parallel Shaft Vertical Mounting>


Parallel Shaft 1500r/min 40 Dgree

kW SF

Low Speed Shaft Speed（r/min）238 211 188 168 150 134 120 107 94 83 75 67 60 54 48 42 38 33 30

Nominal Reduction Ratio6.3 7.1 8 9 10 11.2 12.5 14 16 18 20 22.4 25 28 31.5 35.5 40 45 50

5.5kW

4P

1 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 90301.25 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 90301.5 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 90302 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9025 9030

7.5kW

4P

1 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 90301.25 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9025 90301.5 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9025 90302 9015 9015 9015 9015 9015 9015 9015 9015 9025 9025 9025 9025 9030 9030

11kW

4P

1 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9025 90301.25 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9025 9025 9025 90301.5 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9025 9025 9025 9025 9030 90302 9015 9015 9015 9015 9015 9015 9015 9015 9025 9015 9025 9025 9025 9030 9030 9030 9030 9035

15kW

4P

1 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9025 9025 9025 9025 9030 90301.25 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9025 9025 9025 9025 9030 9030 9030 90301.5 9015 9015 9015 9015 9015 9015 9015 9015 9015 9025 9025 9025 9025 9025 9030 9030 9030 9030 90352 9015 9015 9015 9015 9015 9015 9015 9025 9025 9025 9025 9030 9030 9030 9030 9035 9035 9035 9040

18.5kW

4P

1 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9025 9025 9025 9025 9025 9030 9030 9030 90301.25 9015 9015 9015 9015 9015 9015 9015 9015 9015 9025 9025 9025 9025 9025 9030 9030 9030 9035 90351.5 9015 9015 9015 9015 9015 9015 9015 9025 9025 9025 9025 9025 9025 9030 9030 9030 9035 9035 90402 9015 9015 9015 9015 9015 9025 9025 9025 9025 9030 9030 9030 9030 9030 9035 9035 9040 9045 9045

22kW

4P

1 9015 9015 9015 9015 9015 9015 9015 9015 9025 9025 9025 9025 9025 9025 9030 9030 9030 9030 90351.25 9015 9015 9015 9015 9015 9015 9015 9025 9025 9025 9025 9025 9025 9030 9030 9030 9035 9035 90401.5 9015 9015 9015 9015 9015 9025 9025 9025 9025 9025 9025 9030 9030 9030 9035 9035 9035 9040 90402 9015 9015 9015 9025 9025 9025 9025 9030 9030 9030 9030 9030 9035 9035 9040 9045 9045 9045 9050

30kW

4P

1 9025 9025 9025 9025 9025 9025 9025 9025 9025 9030 9030 9035 9035 9035 9035 9035 9035 9035 90401.25 9025 9025 9025 9025 9025 9025 9025 9025 9025 9030 9030 9035 9035 9035 9035 9035 9040 9045 90451.5 9025 9025 9025 9025 9025 9025 9025 9030 9030 9030 9030 9035 9035 9035 9040 9045 9045 9045 90502 9025 9025 9025 9025 9025 9030 9030 9030 9030 9035 9035 9040 9040 9045 9045 9050 9050 9055 9055

37kW

4P

1 9025 9030 9030 9030 9030 9030 9030 9030 9030 9035 9035 9035 9040 9040 9040 9040 9040 9045 90451.25 9025 9030 9030 9030 9030 9030 9030 9030 9030 9035 9035 9035 9040 9040 9040 9045 9045 9050 90501.5 9025 9030 9030 9030 9030 9030 9030 9030 9030 9035 9035 9035 9040 9045 9045 9045 9050 9055 90552 9025 9030 9030 9030 9030 9030 9030 9035 9035 9040 9040 9045 9045 9050 9050 9055 9055 9060 9060

45kW

4P

1 9040 9040 9035 9035 9035 9035 9035 9035 9035 9035 9035 9045 9045 9045 9045 9045 9045 9045 90551.25 9040 9040 9035 9035 9035 9035 9035 9035 9035 9035 9035 9045 9045 9045 9045 9045 9050 9055 90551.5 9040 9040 9035 9035 9035 9035 9035 9035 9035 9035 9040 9045 9045 9045 9045 9050 9055 9055 90602 9040 9040 9035 9035 9035 9035 9035 9035 9040 9045 9045 9050 9050 9055 9055 9060 9060 9070 9070

55kW

4P

1 9040 9040 9040 9040 9040 9040 9040 9040 9045 9045 9045 9045 9055 9055 9055 9055 9055 9055 90551.25 9040 9040 9040 9040 9040 9040 9040 9040 9045 9045 9045 9045 9055 9055 9055 9055 9055 9055 90601.5 9040 9040 9040 9040 9040 9040 9040 9040 9045 9045 9045 9045 9055 9055 9055 9055 9055 9065 90602 9040 9040 9040 9040 9040 9040 9040 9045 9045 9050 9050 9055 9055 9055 9060 9065 9065 9065 9065

75kW

4P

1 9050 9050 9055 9055 9055 9055 9055 9055 9055 9055 9055 9055 9065 9065 9065 9065 9065 9065 90651.25 9050 9050 9055 9055 9055 9055 9055 9055 9055 9055 9055 9055 9065 9065 9065 9065 9065 9065 90651.5 9050 9050 9055 9055 9055 9055 9055 9055 9055 9055 9055 9055 9065 9065 9065 9065 9065 9070 90702 9050 9050 9055 9055 9055 9055 9055 9055 9055 9055 9055 9060 9065 9065 9065 9070 9070 9075 9075

90kW

4P

1 9055 9055 9060 9055 9060 9060 9060 9060 9065 9065 9070 9070 9070 9070 9070 9070 90751.25 9055 9055 9060 9055 9060 9060 9060 9060 9065 9065 9070 9070 9070 9070 9070 9070 90751.5 9055 9055 9060 9055 9060 9060 9060 9060 9065 9065 9070 9070 9070 9070 9070 9075 90752 9055 9055 9060 9055 9060 9060 9060 9060 9065 9065 9070 9070 9070 9075 9075 9080 9080

110kW

4P

1 9065 9065 9065 9065 9065 9065 9070 9075 9075 9075 9075 9075 9075 9075 9075 90751.25 9065 9065 9065 9065 9065 9065 9070 9075 9075 9075 9075 9075 9075 9075 9075 90751.5 9065 9065 9065 9065 9065 9065 9070 9075 9075 9075 9075 9075 9075 9075 9075 90752 9065 9065 9065 9065 9065 9065 9070 9075 9075 9075 9075 9075 9075 9080 9085 9085

B - 74

Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

Size of Reducer

SELECTION Drive Unit Parallel Shaft Combinations with 4P motor


SF kW27 24 21 19 17Nominal Reduction Ratio

56 63 71 80 909030 9030 9030 9035 9035 1

5.5kW

4P9030 9030 9030 9035 9035 1.259030 9030 9030 9035 9035 1.59030 9030 9030 9035 9035 29030 9030 9030 9035 9035 1

7.5kW

4P9030 9030 9030 9035 9035 1.259030 9030 9030 9035 9035 1.59030 9030 9035 9035 9035 29030 9030 9030 9035 9035 1

11kW

4P9030 9030 9030 9035 9035 1.259030 9030 9035 9035 9045 1.59035 9040 9040 9045 9045 29030 9030 9035 9035 9035 1

15kW

4P9035 9035 9035 9045 9045 1.259035 9040 9045 9045 9045 1.59045 9045 9050 9055 9055 29030 9035 9035 9045 9045 1

18.5kW

4P9035 9040 9045 9045 9045 1.259045 9045 9045 9055 9055 1.59050 9050 9055 9055 9065 29035 9040 9040 9045 9045 1

22kW

4P9040 9045 9045 9055 9055 1.259045 9045 9055 9055 9055 1.59055 9055 9055 9065 9065 29045 9045 9050 9055 9055 1

30kW

4P9050 9050 9055 9055 9065 1.259055 9055 9060 9065 9065 1.59060 9060 9065 9065 9075 29050 9050 9055 9055 9065 1

37kW

4P9055 9055 9060 9065 9065 1.259060 9060 9065 9065 9075 1.59065 9065 9070 9075 9075 29055 9055 9060 9065 9065 1

45kW

4P9060 9060 9065 9065 9075 1.259065 9065 9065 9065 9075 1.59070 9070 9075 9075 9085 29060 9060 9065 9065 9075 1

55kW

4P9065 9065 9065 9075 9075 1.259065 9065 9070 9075 9075 1.59075 9075 9080 9085 9085 29070 9070 9070 9075 9075 1

75kW

4P9070 9070 9075 9075 9085 1.259075 9075 9080 9085 9085 1.59080 9080 9085 9085 9085 29075 9075 9075 9075 9085 1

90kW

4P9075 9075 9080 9085 9085 1.259075 9080 9085 9085 9085 1.59085 9085 9085 9085 9085 29080 9085 9085 9085 9085 1

110kW

4P9080 9085 9085 9085 9085 1.259085 9085 9085 9085 9085 1.59085 9085 9085 9085 9085 2

B - 75



Parallel Shaft 1800r/min 40 Dgree

kW SF

Low Speed Shaft Speed（r/min）286 254 225 200 180 161 144 129 113 100 90 80 72 64 57 51 45 40 36

Nominal Reduction Ratio6.3 7.1 8 9 10 11.2 12.5 14 16 18 20 22.4 25 28 31.5 35.5 40 45 50

5.5kW

4P

1 9015 9015 9015 9015 9015 9015 9015 9015 9015 90301.25 9015 9015 9015 9015 9015 9015 9015 9015 9015 90301.5 9015 9015 9015 9015 9015 9015 9015 9015 9015 90302 9015 9015 9015 9015 9015 9015 9015 9015 9015 9030

7.5kW

4P

1 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 90301.25 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 90301.5 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9025 90302 9015 9015 9015 9015 9015 9015 9015 9015 9025 9025 9025 9030

11kW

4P

1 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 90301.25 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9025 9025 9025 90301.5 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9025 9025 9025 90302 9015 9015 9015 9015 9015 9015 9015 9015 9025 9025 9025 9025 9030 9030 9030 9035

15kW

4P

1 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9025 9025 9025 90301.25 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9025 9025 9025 9025 9030 90301.5 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9025 9025 9025 9025 9030 9030 9030 90302 9015 9015 9015 9015 9015 9015 9015 9015 9025 9025 9025 9025 9030 9030 9030 9030 9035 9035

18.5kW

4P

1 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9025 9025 9025 9025 9025 9025 9025 9030 90301.25 9015 9015 9015 9015 9015 9015 9015 9015 9015 9015 9025 9025 9025 9025 9025 9030 9030 9030 90301.5 9015 9015 9015 9015 9015 9015 9015 9015 9015 9025 9025 9025 9025 9025 9030 9030 9030 9035 90352 9015 9015 9015 9015 9015 9015 9015 9025 9025 9025 9025 9030 9030 9030 9030 9035 9035 9040 9040

22kW

4P

1 9015 9015 9015 9015 9015 9015 9015 9015 9015 9025 9025 9025 9025 9025 9025 9030 9030 9030 90301.25 9015 9015 9015 9015 9015 9015 9015 9015 9015 9025 9025 9025 9025 9025 9030 9030 9030 9030 90351.5 9015 9015 9015 9015 9015 9015 9015 9025 9025 9025 9025 9025 9030 9030 9030 9030 9030 9035 90402 9015 9015 9015 9015 9015 9025 9025 9025 9025 9030 9030 9030 9030 9030 9035 9035 9040 9045 9045

30kW

4P

1 9025 9025 9025 9025 9025 9025 9025 9025 9025 9030 9030 9035 9035 9035 9035 9035 9035 9035 90351.25 9025 9025 9025 9025 9025 9025 9025 9025 9025 9030 9030 9035 9035 9035 9035 9035 9035 9040 90401.5 9025 9025 9025 9025 9025 9025 9025 9025 9025 9030 9030 9035 9035 9035 9035 9035 9040 9045 90452 9025 9025 9025 9025 9025 9025 9025 9030 9030 9030 9030 9035 9035 9040 9040 9045 9045 9050 9050

37kW

4P

1 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9035 9035 9035 9040 9040 9040 9040 9040 90401.25 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9035 9035 9035 9040 9040 9040 9040 9045 90451.5 9030 9030 9030 9030 9030 9030 9030 9030 9030 9030 9035 9035 9035 9040 9040 9045 9045 9050 90502 9030 9030 9030 9030 9030 9030 9030 9030 9035 9035 9035 9040 9040 9045 9045 9050 9050 9055 9055

45kW

4P

1 9035 9035 9035 9035 9035 9035 9035 9035 9035 9045 9045 9045 9045 9045 9045 9045 90451.25 9035 9035 9035 9035 9035 9035 9035 9035 9035 9045 9045 9045 9045 9045 9045 9050 90501.5 9035 9035 9035 9035 9035 9035 9035 9035 9035 9045 9045 9045 9045 9045 9050 9055 90552 9035 9035 9035 9035 9035 9035 9035 9040 9040 9045 9045 9050 9050 9055 9055 9060 9060

55kW

4P

1 9040 9040 9040 9040 9040 9040 9040 9040 9045 9045 9045 9045 9055 9055 9055 9055 9055 9055 90551.25 9040 9040 9040 9040 9040 9040 9040 9040 9045 9045 9045 9045 9055 9055 9055 9055 9055 9055 90551.5 9040 9040 9040 9040 9040 9040 9040 9040 9045 9045 9045 9045 9055 9055 9055 9055 9055 9055 90602 9040 9040 9040 9040 9040 9040 9040 9040 9045 9045 9045 9050 9055 9055 9055 9060 9060 9065 9065

75kW

4P

1 9055 9055 9055 9055 9055 9055 9055 9055 9055 9055 9065 9065 9065 9065 9065 9065 90651.25 9055 9055 9055 9055 9055 9055 9055 9055 9055 9055 9065 9065 9065 9065 9065 9065 90651.5 9055 9055 9055 9055 9055 9055 9055 9055 9055 9055 9065 9065 9065 9065 9065 9065 90652 9055 9055 9055 9055 9055 9055 9055 9055 9055 9060 9065 9065 9065 9065 9065 9070 9075

90kW

4P

1 9055 9055 9060 9060 9060 9060 9060 9065 9065 9070 9070 9070 9070 9070 9070 90751.25 9055 9055 9060 9060 9060 9060 9060 9065 9065 9070 9070 9070 9070 9070 9070 90751.5 9055 9055 9060 9060 9060 9060 9060 9065 9065 9070 9070 9070 9070 9070 9070 90752 9055 9055 9060 9060 9060 9060 9060 9065 9065 9070 9070 9070 9070 9070 9075 9075

110kW

4P

1 9065 9065 9065 9065 9065 9065 9070 9075 9075 9075 9075 9075 9075 9075 9075 90801.25 9065 9065 9065 9065 9065 9065 9070 9075 9075 9075 9075 9075 9075 9075 9075 90801.5 9065 9065 9065 9065 9065 9065 9070 9075 9075 9075 9075 9075 9075 9075 9075 90802 9065 9065 9065 9065 9065 9065 9070 9075 9075 9075 9075 9075 9075 9075 9080 9085

B - 76

Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

Size of Reducer



SF kW32 29 25 23 20Nominal Reduction Ratio

56 63 71 80 909030 9030 9030 9035 9035 1

5.5kW

4P9030 9030 9030 9035 9035 1.259030 9030 9030 9035 9035 1.59030 9030 9030 9035 9035 29030 9030 9030 9035 9035 1

7.5kW

4P9030 9030 9030 9035 9035 1.259030 9030 9030 9035 9035 1.59030 9030 9035 9035 9035 29030 9030 9030 9035 9035 1

11kW

4P9030 9030 9030 9035 9035 1.259030 9030 9030 9035 9035 1.59030 9035 9035 9045 9045 29030 9030 9030 9035 9035 1

15kW

4P9030 9030 9035 9035 9035 1.259035 9035 9035 9045 9045 1.59040 9040 9045 9045 9055 29030 9030 9035 9035 9035 1

18.5kW

4P9035 9035 9035 9045 9045 1.259035 9040 9045 9045 9045 1.59045 9045 9050 9055 9055 29030 9035 9035 9045 9045 1

22kW

4P9035 9040 9045 9045 9045 1.259040 9045 9045 9055 9055 1.59050 9050 9055 9055 9065 29040 9040 9045 9045 9055 1

30kW

4P9045 9045 9050 9055 9055 1.259050 9050 9055 9055 9065 1.59055 9055 9060 9065 9065 29045 9045 9050 9055 9055 1

37kW

4P9050 9050 9055 9055 9065 1.259055 9055 9060 9065 9065 1.59060 9060 9065 9065 9075 29050 9055 9055 9055 9065 1

45kW

4P9055 9055 9060 9065 9065 1.259060 9060 9065 9065 9075 1.59065 9065 9070 9075 9075 29055 9060 9060 9065 9065 1

55kW

4P9060 9060 9065 9065 9075 1.259065 9065 9065 9065 9075 1.59070 9070 9075 9075 9085 29070 9070 9070 9075 9075 1

75kW

4P9070 9070 9070 9075 9075 1.259070 9070 9075 9075 9085 1.59075 9075 9080 9085 9085 29075 9075 9075 9075 9075 1

90kW

4P9075 9075 9075 9075 9085 1.259075 9075 9080 9085 9085 1.59080 9085 9085 9085 9085 29080 9085 9085 9085 9085 1

110kW

4P9080 9085 9085 9085 9085 1.259080 9085 9085 9085 9085 1.59085 9085 9085 9085 9085 2

B - 77



n1 r/min 1500 1800

Frequency Model Page of Dimension Sheet50Hz 60Hz

Output Speedr/min


Output Torque (Tout) SF Size Assembly ReductionRatio VerticalNm kgf m Nm kgf m

107 490 50 4.74 129 409 42 5.63 9015 P2 14 B-10293.8 560 57 4.70 113 467 48 5.63 9015 P2 16 B-10283.3 630 64 3.83 100 525 54 4.60 9015 P2 18 B-10275.0 700 72 4.01 90.0 584 60 4.80 9015 P3 20 B-10667.0 784 80 3.27 80.4 654 67 3.90 9015 P3 22.4 B-10660.0 875 89 3.23 72.0 730 74 3.89 9015 P3 25 B-106

53.6 980 100 2.63 64.3 817 83 3.16 9015 P3 28 B-1064.25 5.09 9025 P3 28 B-106

47.6 1100 113 2.56 57.1 919 94 3.07 9015 P3 31.5 B-1063.96 4.74 9025 P3 31.5 B-106

42.3 1240 127 2.09 50.7 1040 106 2.49 9015 P3 35.5 B-1063.25 3.89 9025 P3 35.5 B-106

37.5 1400 1432.07

45.0 1170 1192.47 9015 P3 40 B-106

3.21 3.85 9025 P3 40 B-1064.63 5.45 9030 P3 40 B-106

33.3 1580 1611.69

40.0 1310 1342.01 9015 P3 45 B-106

2.63 3.16 9025 P3 45 B-1064.16 5.00 9030 P3 45 B-106

30.0 1750 179 3.72 36.0 1460 149 4.47 9030 P3 50 B-1064.85 5.63 9035 P3 50 B-106

26.8 1960 200 3.36 32.1 1630 167 4.01 9030 P3 56 B-1064.41 5.29 9035 P3 56 B-106

23.8 2210 2253.00

28.6 1840 1883.58 9030 P3 63 B-106

3.90 4.67 9035 P3 63 B-1064.92 5.81 9040 P3 63 B-106

21.1 2490 2542.69

25.4 2070 2123.21 9030 P3 71 B-106

3.56 4.25 9035 P3 71 B-1064.03 4.83 9040 P3 71 B-106

18.8 2800 286 3.12 22.5 2330 238 3.74 9035 P3 80 B-106

16.7 3150 322 2.85 20.0 2630 268 3.41 9035 P3 90 B-1064.23 5.07 9045 P3 90 B-106


n1 r/min 1500 1800


Output Speedr/min



134 535 55 4.26 161 446 46 5.20 9015 P2 11.2 B-102120 597 61 4.26 144 497 51 5.06 9015 P2 12.5 B-102107 669 68 3.48 129 557 57 4.13 9015 P2 14 B-10293.8 764 78 3.45 113 637 65 4.13 9015 P2 16 B-102

83.3 860 88 2.81 100 716 73 3.37 9015 P2 18 B-1024.53 5.46 9025 P2 18 B-102

75.0 955 98 2.94 90.0 796 81 3.52 9015 P3 20 B-1064.40 5.20 9025 P3 20 B-106

67.0 1070 109 2.40 80.4 891 91 2.86 9015 P3 22.4 B-1063.84 4.53 9025 P3 22.4 B-106

60.0 1190 122 2.37 72.0 995 102 2.85 9015 P3 25 B-1063.76 4.26 9025 P3 25 B-106

53.6 1340 1371.93

64.3 1110 1142.31 9015 P3 28 B-106

3.11 3.73 9025 P3 28 B-1064.93 5.86 9030 P3 28 B-106

47.6 1500 1541.88

57.1 1250 1282.25 9015 P3 31.5 B-106

2.90 3.48 9025 P3 31.5 B-1064.13 5.06 9030 P3 31.5 B-106

42.3 1700 1731.53

50.7 1410 1441.82 9015 P3 35.5 B-106

2.38 2.85 9025 P3 35.5 B-1063.81 4.53 9030 P3 35.5 B-106

B - 78

Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

SELECTION Drive Unit Parallel Shaft 5.5kW, 7.5kW

FrequencyModel Page of

Dimension Sheet50Hz 60HzOutput Speed



Ratio VerticalNm kgf m Nm kgf m

37.5 1910 195

1.52

45.0 1590 163

1.81 9015 P3 40 B-1062.36 2.82 9025 P3 40 B-1063.40 4.00 9030 P3 40 B-1064.40 5.20 9035 P3 40 B-106

33.3 2150 219

1.24

40.0 1790 183

1.48 9015 P3 45 B-1061.93 2.31 9025 P3 45 B-1063.05 3.66 9030 P3 45 B-1064.00 4.80 9035 P3 45 B-1064.53 5.46 9040 P3 45 B-106

30.0 2390 2442.73

36.0 1990 2033.28 9030 P3 50 B-106

3.56 4.13 9035 P3 50 B-1064.40 5.33 9040 P3 50 B-106

26.8 2670 273

2.46

32.1 2230 228

2.94 9030 P3 56 B-1063.24 3.88 9035 P3 56 B-1063.68 4.40 9040 P3 56 B-1064.88 5.84 9045 P3 56 B-106

23.8 3010 307

2.20

28.6 2510 256

2.62 9030 P3 63 B-1062.86 3.42 9035 P3 63 B-1063.61 4.26 9040 P3 63 B-1064.50 5.41 9045 P3 63 B-106

21.1 3390 346

1.97

25.4 2830 288

2.36 9030 P3 71 B-1062.61 3.11 9035 P3 71 B-1062.96 3.54 9040 P3 71 B-1063.86 4.62 9045 P3 71 B-1064.26 5.20 9050 P3 71 B-106

18.8 3820 390 2.29 22.5 3180 325 2.74 9035 P3 80 B-1063.65 4.38 9045 P3 80 B-106

16.7 4300 4392.09

20.0 3580 3662.50 9035 P3 90 B-106

3.10 3.72 9045 P3 90 B-1064.53 5.33 9055 P3 90 B-106


n1 r/min 1500 1800


Output Speedr/min



211 497 51 4.72 254 414 42 5.63 9015 P2 7.1 B-102188 560 57 4.63 225 467 48 5.54 9015 P2 8 B-102167 630 64 3.72 200 525 54 4.45 9015 P2 9 B-102150 700 72 3.63 180 584 60 4.27 9015 P2 10 B-102

134 784 80 2.90 161 654 67 3.54 9015 P2 11.2 B-1024.81 5.81 9025 P2 11.2 B-102

120 875 89 2.90 144 730 74 3.45 9015 P2 12.5 B-1024.63 5.54 9025 P2 12.5 B-102

107 980 100 2.37 129 817 83 2.81 9015 P2 14 B-1023.81 4.54 9025 P2 14 B-102

93.8 1120 114 2.35 113 934 95 2.81 9015 P2 16 B-1023.81 4.54 9025 P2 16 B-102

83.3 1260 1291.91

100 1050 1072.30 9015 P2 18 B-102

3.09 3.72 9025 P2 18 B-1024.90 5.90 9030 P2 18 B-102

75.0 1400 1432.00

90.0 1170 1192.40 9015 P3 20 B-106

3.00 3.54 9025 P3 20 B-1064.63 5.54 9030 P3 20 B-106

B - 79

SELECTION Drive Unit Parallel Shaft 7.5kW, 11kW

B - 80

Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles


Output Speedr/min



67.0 1570 1601.63

80.4 1310 1331.95 9015 P3 22.4 B-106

2.61 3.09 9025 P3 22.4 B-1064.18 5.00 9030 P3 22.4 B-106

60.0 1750 179

1.61

72.0 1460 149

1.94 9015 P3 25 B-1062.56 2.90 9025 P3 25 B-1063.72 4.45 9030 P3 25 B-1064.81 5.81 9035 P3 25 B-106

53.6 1960 200

1.31

64.3 1630 167

1.58 9015 P3 28 B-1062.12 2.54 9025 P3 28 B-1063.36 4.00 9030 P3 28 B-1064.36 5.27 9035 P3 28 B-1064.90 5.90 9040 P3 28 B-106

47.6 2210 225

1.28

57.1 1840 188

1.53 9015 P3 31.5 B-1061.98 2.37 9025 P3 31.5 B-1062.81 3.45 9030 P3 31.5 B-1063.81 4.63 9035 P3 31.5 B-1064.72 5.72 9040 P3 31.5 B-106

42.3 2490 254

1.04

50.7 2070 212

1.24 9015 P3 35.5 B-1061.62 1.94 9025 P3 35.5 B-1062.60 3.09 9030 P3 35.5 B-1063.54 4.18 9035 P3 35.5 B-1063.90 4.63 9040 P3 35.5 B-106

37.5 2800 286

1.03

45.0 2330 238

1.23 9015 P3 40 B-1061.60 1.92 9025 P3 40 B-1062.31 2.72 9030 P3 40 B-1063.00 3.54 9035 P3 40 B-1063.81 4.54 9040 P3 40 B-1064.85 5.82 9045 P3 40 B-106

33.3 3150 322

0.84

40.0 2630 268

1.00 9015 P3 45 B-1061.31 1.58 9025 P3 45 B-1062.08 2.50 9030 P3 45 B-1062.72 3.27 9035 P3 45 B-1063.09 3.72 9040 P3 45 B-1064.12 4.94 9045 P3 45 B-1064.72 5.63 9050 P3 45 B-106

30.0 3500 358

1.86

36.0 2920 298

2.23 9030 P3 50 B-1062.42 2.81 9035 P3 50 B-1063.00 3.63 9040 P3 50 B-1063.93 4.71 9045 P3 50 B-1064.63 5.54 9050 P3 50 B-106

26.8 3920 400

1.68

32.1 3270 334

2.00 9030 P3 56 B-1062.20 2.64 9035 P3 56 B-1062.50 3.00 9040 P3 56 B-1063.32 3.98 9045 P3 56 B-1063.81 4.54 9050 P3 56 B-1064.90 5.90 9055 P3 56 B-106

23.8 4410 450

1.50

28.6 3680 375

1.79 9030 P3 63 B-1061.95 2.33 9035 P3 63 B-1062.46 2.90 9040 P3 63 B-1063.07 3.69 9045 P3 63 B-1063.54 4.27 9050 P3 63 B-1065.00 6.00 9055 P3 63 B-106

21.1 4970 508

1.34

25.4 4140 423

1.60 9030 P3 71 B-1061.78 2.12 9035 P3 71 B-1062.01 2.41 9040 P3 71 B-1062.63 3.15 9045 P3 71 B-1062.90 3.54 9050 P3 71 B-1064.00 4.81 9055 P3 71 B-1064.54 5.45 9060 P3 71 B-108

18.8 5600 5721.56

22.5 4670 4771.87 9035 P3 80 B-106

2.49 2.99 9045 P3 80 B-1063.81 4.54 9055 P3 80 B-106

16.7 6300 644

1.42

20.0 5250 536

1.70 9035 P3 90 B-1062.11 2.53 9045 P3 90 B-1063.09 3.63 9055 P3 90 B-1064.81 5.76 9065 P3 90 B-106

SELECTION Drive Unit Parallel Shaft 11kW

B - 81


n1 r/min 1500 1800


Output Speedr/min



238 602 61 4.26 286 501 51 5.06 9015 P2 6.3 B-102211 678 69 3.46 254 565 58 4.13 9015 P2 7.1 B-102188 764 78 3.40 225 637 65 4.06 9015 P2 8 B-102

167 860 88 2.73 200 716 73 3.26 9015 P2 9 B-1024.53 5.40 9025 P2 9 B-102

150 955 98 2.66 180 796 81 3.13 9015 P2 10 B-1024.33 5.20 9025 P2 10 B-102

134 1070 109 2.13 161 891 91 2.60 9015 P2 11.2 B-1023.53 4.26 9025 P2 11.2 B-102

120 1190 1222.13

144 995 1022.53 9015 P2 12.5 B-102

3.40 4.06 9025 P2 12.5 B-1025.00 5.93 9030 P2 12.5 B-102

107 1340 1371.74

129 1110 1142.06 9015 P2 14 B-102

2.80 3.33 9025 P2 14 B-1024.46 5.40 9030 P2 14 B-102

93.8 1530 1561.72

113 1270 1302.06 9015 P2 16 B-102

2.80 3.33 9025 P2 16 B-1024.00 4.80 9030 P2 16 B-102

83.3 1720 176

1.40

100 1430 146

1.68 9015 P2 18 B-1022.26 2.73 9025 P2 18 B-1023.60 4.33 9030 P2 18 B-1024.73 5.66 9035 P2 18 B-102

75.0 1910 195

1.47

90.0 1590 163

1.76 9015 P3 20 B-1062.20 2.60 9025 P3 20 B-1063.40 4.06 9030 P3 20 B-1064.20 5.00 9035 P2 20 B-102

67.0 2140 218

1.20

80.4 1780 182

1.43 9015 P3 22.4 B-1061.92 2.26 9025 P3 22.4 B-1063.06 3.66 9030 P3 22.4 B-1063.80 4.53 9035 P2 22.4 B-1024.46 5.33 9040 P3 22.4 B-1064.55 5.44 9045 P3 22.4 B-106

60.0 2390 244

1.18

72.0 1990 203

1.42 9015 P3 25 B-1061.88 2.13 9025 P3 25 B-1062.73 3.26 9030 P3 25 B-1063.53 4.26 9035 P3 25 B-1064.40 5.26 9040 P3 25 B-106

53.6 2670 273

0.96

64.3 2230 228

1.15 9015 P3 28 B-1061.55 1.86 9025 P3 28 B-1062.46 2.93 9030 P3 28 B-1063.20 3.86 9035 P3 28 B-1063.60 4.33 9040 P3 28 B-1064.72 5.64 9045 P3 28 B-106

47.6 3010 307

0.94

57.1 2510 256

1.12 9015 P3 31.5 B-1061.45 1.74 9025 P3 31.5 B-1062.06 2.53 9030 P3 31.5 B-1062.08 3.40 9035 P3 31.5 B-1063.46 4.20 9040 P3 31.5 B-1064.53 5.44 9045 P3 31.5 B-106

42.3 3390 346

1.19

50.7 2830 288

1.42 9025 P3 35.5 B-1061.90 2.26 9030 P3 35.5 B-1062.60 3.06 9035 P3 35.5 B-1062.86 3.40 9040 P3 35.5 B-1063.80 4.55 9045 P3 35.5 B-1064.53 5.40 9050 P3 35.5 B-106

37.5 3820 390

1.18

45.0 3180 325

1.41 9025 P3 40 B-1061.70 2.00 9030 P3 40 B-1062.20 2.60 9035 P3 40 B-1062.80 3.33 9040 P3 40 B-1063.56 4.27 9045 P3 40 B-1064.20 5.00 9050 P3 40 B-106







33.3 4300 439

0.96

40.0 3580 366

1.15 9025 P3 45 B-1061.52 1.83 9030 P3 45 B-1062.00 2.40 9035 P3 45 B-1062.26 2.73 9040 P3 45 B-1063.02 3.62 9045 P3 45 B-1063.46 4.13 9050 P3 45 B-1064.73 5.66 9055 P3 45 B-106

30.0 4780 488

1.36

36.0 3980 406

1.64 9030 P3 50 B-1061.78 2.06 9035 P3 50 B-1062.20 2.66 9040 P3 50 B-1062.88 3.46 9045 P3 50 B-1063.40 4.06 9050 P3 50 B-1064.46 5.40 9055 P3 50 B-106

26.8 5350 546

1.23

32.1 4460 455

1.47 9030 P3 56 B-1061.62 1.94 9035 P3 56 B-1061.84 2.20 9040 P3 56 B-1062.44 2.92 9045 P3 56 B-1062.80 3.33 9050 P3 56 B-1063.60 4.33 9055 P3 56 B-1064.40 5.26 9060 P3 56 B-108

23.8 6020 614

1.10

28.6 5010 512

1.31 9030 P3 63 B-1061.43 1.71 9035 P3 63 B-1061.80 2.13 9040 P3 63 B-1062.25 2.70 9045 P3 63 B-1062.60 3.13 9050 P3 63 B-1063.66 4.40 9055 P3 63 B-1064.26 5.13 9060 P3 63 B-108

21.1 6780 692

0.98

25.4 5650 577

1.18 9030 P3 71 B-1061.30 1.55 9035 P3 71 B-1061.48 1.77 9040 P3 71 B-1061.93 2.31 9045 P3 71 B-1062.13 2.60 9050 P3 71 B-1062.93 3.53 9055 P3 71 B-1063.33 4.00 9060 P3 71 B-1084.61 5.52 9065 P3 71 B-108

18.8 7640 780

1.14

22.5 6370 650

1.37 9035 P3 80 B-1061.82 2.19 9045 P3 80 B-1062.80 3.33 9055 P3 80 B-1064.58 5.65 9065 P3 80 B-108

16.7 8600 878

1.04

20.0 7160 731

1.25 9035 P3 90 B-1061.55 1.86 9045 P3 90 B-1062.26 2.66 9055 P3 90 B-1063.53 4.22 9065 P3 90 B-108


n1 r/min 1500 1800


Output Speedr/min



238 742 76 3.45 286 618 63 4.10 9015 P2 6.3 B-102

211 836 85 2.81 254 697 71 3.35 9015 P2 7.1 B-1024.48 5.40 9025 P2 7.1 B-102

188 942 96 2.75 225 785 80 3.29 9015 P2 8 B-1024.48 5.35 9025 P2 8 B-102

167 1060 108 2.21 200 883 90 2.64 9015 P2 9 B-1023.67 4.37 9025 P2 9 B-102

150 1180 120 2.16 180 982 100 2.54 9015 P2 10 B-1023.51 4.21 9025 P2 10 B-102

134 1320 1351.72

161 1100 1122.10 9015 P2 11.2 B-102

2.86 3.45 9025 P2 11.2 B-1024.64 5.56 9030 P2 11.2 B-102

B - 82

Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

SELECTION Drive Unit Parallel Shaft 15kW, 18.5kW






107 1650 168

1.41

129 1370 140

1.67 9015 P2 14 B-1022.27 2.70 9025 P2 14 B-1023.62 4.37 9030 P2 14 B-1024.91 5.89 9035 P2 14 B-102

93.8 1880 192

1.40

113 1570 160

1.67 9015 P2 16 B-1022.27 2.70 9025 P2 16 B-1023.24 3.89 9030 P2 16 B-1024.21 5.08 9035 P2 16 B-102

83.3 2120 216

1.14

100 1770 180

1.36 9015 P2 18 B-1021.83 2.21 9025 P2 18 B-1022.91 3.51 9030 P2 18 B-1023.83 4.59 9035 P2 18 B-1024.32 5.13 9040 P2 18 B-102

75.0 2360 241

1.78

90.0 1960 200

2.10 9025 P3 20 B-1062.75 3.29 9030 P3 20 B-1063.40 4.05 9035 P2 20 B-1024.43 5.29 9040 P3 20 B-106

67.0 2640 269

1.55

80.4 2200 224

1.83 9025 P3 22.4 B-1062.48 2.97 9030 P3 22.4 B-1063.08 3.67 9035 P2 22.4 B-1023.62 4.32 9040 P3 22.4 B-1064.55 5.44 9045 P3 22.4 B-106

60.0 2940 301

1.52

72.0 2450 251

1.72 9025 P3 25 B-1062.21 2.64 9030 P3 25 B-1062.86 3.45 9035 P3 25 B-1063.56 4.27 9040 P3 25 B-1064.53 5.43 9045 P3 25 B-106

53.6 3300 337

1.26

64.3 2750 281

1.51 9025 P3 28 B-1062.00 2.37 9030 P3 28 B-1062.59 3.13 9035 P3 28 B-1062.91 3.51 9040 P3 28 B-1063.82 4.57 9045 P3 28 B-1064.37 5.24 9050 P3 28 B-106

47.6 3710 379

1.17

57.1 3090 316

1.41 9025 P3 31.5 B-1061.67 2.05 9030 P3 31.5 B-1062.27 2.75 9035 P3 31.5 B-1062.81 3.40 9040 P3 31.5 B-1063.67 4.41 9045 P3 31.5 B-1064.43 5.29 9050 P3 31.5 B-106

42.3 4180 427

0.96

50.7 3480 356

1.15 9025 P3 35.5 B-1061.54 1.83 9030 P3 35.5 B-1062.10 2.48 9035 P3 35.5 B-1062.32 2.75 9040 P3 35.5 B-1063.08 3.69 9045 P3 35.5 B-1063.67 4.37 9050 P3 35.5 B-1064.59 5.45 9055 P3 35.5 B-106

37.5 4710 481

0.95

45.0 3930 401

1.14 9025 P3 40 B-1061.37 1.62 9030 P3 40 B-1061.78 2.10 9035 P3 40 B-1062.27 2.70 9040 P3 40 B-1062.88 3.46 9045 P3 40 B-1063.40 4.05 9050 P3 40 B-1064.75 5.67 9055 P3 40 B-106

33.3 5300 541

1.23

40.0 4420 451

1.48 9030 P3 45 B-1061.62 1.94 9035 P3 45 B-1061.83 2.21 9040 P3 45 B-1062.45 2.94 9045 P3 45 B-1062.81 3.35 9050 P3 45 B-1063.83 4.59 9055 P3 45 B-1064.43 5.29 9060 P3 45 B-108

30.0 5890 601

1.10

36.0 4910 501

1.32 9030 P3 50 B-1061.44 1.67 9035 P3 50 B-1061.78 2.16 9040 P3 50 B-1062.34 2.80 9045 P3 50 B-1062.75 3.29 9050 P3 50 B-1063.62 4.37 9055 P3 50 B-1064.54 5.40 9060 P3 50 B-108

B - 83

SELECTION Drive Unit Parallel Shaft 18.5kW


Output Speedr/min



26.8 6600 673

1.00

32.1 5500 561


23.8 7420 758

0.89

28.6 6180 631


21.1 8360 854

1.05

25.4 6970 711


18.8 9420 962

0.92

22.5 7850 802

1.11 9035 P3 80 B-1061.48 1.77 9045 P3 80 B-1062.27 2.70 9055 P3 80 B-1063.71 4.45 9065 P3 80 B-108

16.7 10600 1080

0.84

20.0 8830 902

1.01 9035 P3 90 B-1061.25 1.50 9045 P3 90 B-1061.83 2.16 9055 P3 90 B-1062.86 3.42 9065 P3 90 B-1084.75 5.67 9075 P3 90 B-108


n1 r/min 1500 1800


Output Speedr/min



238 882 90 2.90 286 735 75 3.45 9015 P2 6.3 B-1024.63 5.54 9025 P2 6.3 B-102

211 994 102 2.36 254 829 85 2.81 9015 P2 7.1 B-1023.77 4.54 9025 P2 7.1 B-102

188 1120 114 2.31 225 934 95 2.77 9015 P2 8 B-1023.77 4.50 9025 P2 8 B-102

167 1260 1291.86

200 1050 1072.22 9015 P2 9 B-102

3.09 3.68 9025 P2 9 B-1024.77 5.72 9030 P3 9 B-102

150 1400 1431.81

180 1170 1192.13 9015 P2 10 B-102

2.95 3.54 9025 P2 10 B-1024.36 5.22 9030 P3 10 B-102

134 1570 1601.45

161 1310 1331.77 9015 P2 11.2 B-102

2.40 2.90 9025 P2 11.2 B-1023.90 4.68 9030 P2 11.2 B-102

120 1750 179

1.45

144 1460 149

1.72 9015 P2 12.5 B-1022.31 2.77 9025 P2 12.5 B-1023.40 4.04 9030 P2 12.5 B-1024.54 5.45 9035 P2 12.5 B-102

107 1960 200

1.18

129 1630 167

1.40 9015 P2 14 B-1021.90 2.27 9025 P2 14 B-1023.04 3.68 9030 P2 14 B-1024.13 4.95 6035 P2 14 B-1024.50 5.36 9040 P2 14 B-102

B - 84

Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

SELECTION Drive Unit Parallel Shaft 18.5kW, 22kW






93.8 2240 229

1.17

113 1870 191

1.40 9015 P2 16 B-1021.90 2.27 9025 P2 16 B-1022.72 3.27 9030 P2 16 B-1023.54 4.27 9035 P2 16 B-1024.40 5.27 9040 P2 16 B-102

83.3 2520 257

1.54

100 2100 215

1.86 9025 P2 18 B-1022.45 2.95 9030 P2 18 B-1023.22 3.86 9035 P2 18 B-1023.63 4.31 9040 P2 18 B-1024.75 5.67 9045 P2 18 B-102

75.0 2800 286

1.50

90.0 2330 238

1.77 9025 P3 20 B-1062.31 2.77 9030 P3 20 B-1062.86 3.40 9035 P2 20 B-1023.72 4.45 9040 P3 20 B-1064.68 5.60 9045 P2 20 B-102

67.0 3140 320

1.30

80.4 2610 267

1.54 9025 P3 22.4 B-1062.09 2.50 9030 P3 22.4 B-1062.59 3.09 9035 P2 22.4 B-1023.04 3.63 9040 P3 22.4 B-1063.82 4.57 9045 P2 22.4 B-1024.81 5.77 9050 P3 22.4 B-106

60.0 3500 358

1.28

72.0 2920 298

1.45 9025 P3 25 B-1061.86 2.22 9030 P3 25 B-1062.40 2.90 9035 P3 25 B-1063.00 3.59 9040 P3 25 B-1063.80 4.57 9045 P3 25 B-1064.45 5.36 9050 P3 25 B-106

53.6 3920 400

1.06

64.3 3270 334

1.27 9025 P3 28 B-1061.68 2.00 9030 P3 28 B-1062.18 2.63 9035 P3 28 B-1062.45 2.95 9040 P3 28 B-1063.21 3.85 9045 P3 28 B-1063.68 4.40 9050 P3 28 B-106

47.6 4410 450

0.99

57.1 3680 375

1.18 9025 P3 31.5 B-1061.40 1.72 9030 P3 31.5 B-1061.90 2.31 9035 P3 31.5 B-1062.36 2.86 9040 P3 31.5 B-1063.09 3.70 9045 P3 31.5 B-1063.72 4.45 9050 P3 31.5 B-1064.77 5.72 9055 P3 31.5 B-106

42.3 4970 508

1.30

50.7 4140 423

1.54 9030 P3 35.5 B-1061.77 2.09 9035 P3 35.5 B-1061.95 2.31 9040 P3 35.5 B-1062.59 3.10 9045 P3 35.5 B-1063.09 3.68 9050 P3 35.5 B-1063.86 4.59 9055 P3 35.5 B-1064.86 5.81 9060 P3 35.5 B-108

37.5 5600 572

1.15

45.0 4670 477

1.36 9030 P3 40 B-1061.50 1.77 9035 P3 40 B-1061.90 2.27 9040 P3 40 B-1062.42 2.91 9045 P3 40 B-1062.86 3.40 9050 P3 40 B-1064.00 4.77 9055 P3 40 B-1064.72 5.68 9060 P3 40 B-108

33.3 6300 644

1.04

40.0 5250 536

1.25 9030 P3 45 B-1061.36 1.63 9035 P3 45 B-1061.54 1.86 9040 P3 45 B-1062.06 2.47 9045 P3 45 B-1062.36 2.81 9050 P3 45 B-1063.22 3.86 9055 P3 45 B-1063.72 4.45 9060 P3 45 B-108

30.0 7000 715

0.93

36.0 5840 596

1.11 9030 P3 50 B-1061.21 1.40 9035 P3 50 B-1061.50 1.81 9040 P3 50 B-1061.96 2.35 9045 P3 50 B-1062.31 2.77 9050 P3 50 B-1063.04 3.68 9055 P3 50 B-1063.81 4.54 9060 P3 50 B-108

B - 85



Output Speedr/min



26.8 7840 801

0.84

32.1 6540 667

1.00 9030 P3 56 B-1061.10 1.32 9035 P3 56 B-1061.25 1.50 9040 P3 56 B-1061.66 1.99 9045 P3 56 B-1061.90 2.27 9050 P3 56 B-1062.45 2.95 9055 P3 56 B-1063.00 3.59 9060 P3 56 B-1083.90 4.67 9065 P3 56 B-1084.68 5.59 9070 P3 56 B-108

23.8 8820 901

0.97

28.6 7350 751


21.1 9940 1020

0.89

25.4 8290 846


18.8 11210 11401.24

22.5 9340 9531.49 9045 P3 80 B-106

1.90 2.27 9055 P3 80 B-1063.12 3.75 9065 P3 80 B-1084.77 5.68 9075 P3 80 B-108

16.7 12610 12901.05

20.0 10510 10701.26 9045 P3 90 B-106

1.54 1.81 9055 P3 90 B-1062.40 2.88 9065 P3 90 B-1084.00 4.77 9075 P3 90 B-108


n1 r/min 1500 1800


Output Speedr/min



238 1200 123 3.40 286 1000 102 4.06 9025 P2 6.3 B-1024.96 5.96 9030 P2 6.3 B-102

211 1360 138 2.76 254 1130 115 3.33 9025 P2 7.1 B-1024.50 5.36 9030 P2 7.1 B-102

188 1530 156 2.76 225 1270 130 3.30 9025 P2 8 B-1023.90 4.66 9030 P2 8 B-102

167 1720 1762.26

200 1430 1462.70 9025 P2 9 B-102

3.50 4.20 9030 P2 9 B-1024.73 5.66 9035 P2 9 B-102

150 1910 1952.16

180 1590 1632.60 9025 P2 10 B-102

3.20 3.83 9030 P2 10 B-1024.06 4.86 9035 P2 10 B-102

134 2140 2181.76

161 1780 1822.13 9025 P2 11.2 B-102

2.86 3.43 9030 P2 11.2 B-1023.70 4.43 9035 P2 11.2 B-1024.30 5.13 9040 P2 11.2 B-102

120 2390 2441.70

144 1990 2032.03 9025 P2 12.5 B-102

2.50 2.96 9030 P2 12.5 B-1023.33 4.00 9035 P2 12.5 B-1024.03 4.83 9040 P2 12.5 B-102

107 2670 273

1.40

129 2230 228

1.66 9025 P2 14 B-1022.23 2.70 9030 P2 14 B-1023.03 3.63 9035 P2 14 B-1023.30 3.93 9040 P2 14 B-1024.54 5.42 9045 P2 14 B-102

B - 86

Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

SELECTION Drive Unit Parallel Shaft 22kW, 30kW


Output Speedr/min



93.8 3060 312

1.40

113 2550 260

1.66 9025 P2 16 B-1022.00 2.40 9030 P2 16 B-1022.60 3.13 9035 P2 16 B-1023.23 3.86 9040 P2 16 B-1024.26 5.09 9045 P2 16 B-1024.73 5.66 9050 P2 16 B-102

83.3 3440 351

1.80

100 2870 293

2.16 9030 P2 18 B-1022.36 2.83 9035 P2 18 B-1022.66 3.16 9040 P2 18 B-1023.48 4.16 9045 P2 18 B-1023.90 4.66 9050 P2 18 B-102

75.0 3820 390

1.70

90.0 3180 325

2.03 9030 P3 20 B-1062.10 2.50 9035 P2 20 B-1022.73 3.26 9040 P3 20 B-1063.43 4.10 9045 P2 20 B-1024.30 5.13 9050 P3 20 B-106

67.0 4280 437

1.90

80.4 3570 364

2.26 9035 P2 22.4 B-1022.23 2.66 9040 P3 22.4 B-1062.80 3.35 9045 P2 22.4 B-1023.53 4.23 9050 P3 22.4 B-1064.06 4.86 9055 P2 22.4 B-102

60.0 4780 488

1.76

72.0 3980 406

2.13 9035 P3 25 B-1062.20 2.63 9040 P3 25 B-1062.79 3.35 9045 P3 25 B-1063.26 3.93 9050 P3 25 B-1064.59 5.50 9055 P3 25 B-106

53.6 5350 546

1.60

64.3 4460 455

1.93 9035 P3 28 B-1061.80 2.16 9040 P3 28 B-1062.36 2.82 9045 P3 28 B-1062.70 3.23 9050 P3 28 B-1063.70 4.40 9055 P3 28 B-1064.30 5.13 9060 P3 28 B-108

47.6 6020 614

1.40

57.1 5010 512

1.70 9035 P3 31.5 B-1061.73 2.10 9040 P3 31.5 B-1062.26 2.72 9045 P3 31.5 B-1062.73 3.26 9050 P3 31.5 B-1063.50 4.20 9055 P3 31.5 B-1064.53 5.43 9060 P3 31.5 B-108

42.3 6780 692

1.30

50.7 5650 577

1.53 9035 P3 35.5 B-1061.43 1.70 9040 P3 35.5 B-1061.90 2.27 9045 P3 35.5 B-1062.26 2.70 9050 P3 35.5 B-1062.83 3.36 9055 P3 35.5 B-1063.56 4.26 9060 P3 35.5 B-1084.48 5.36 9065 P3 35.5 B-108

37.5 7640 780

1.10

45.0 6370 650

1.30 9035 P3 40 B-1061.40 1.66 9040 P3 40 B-1061.78 2.13 9045 P3 40 B-1062.10 2.50 9050 P3 40 B-1062.93 3.50 9055 P3 40 B-1063.46 4.16 9060 P3 40 B-1084.83 5.80 9065 P3 40 B-108

33.3 8600 878

1.00

40.0 7160 731


30.0 9550 975

0.89

36.0 7960 813


B - 87



Output Speedr/min



26.8 10700 1090

0.92

32.1 8910 910


23.8 12030 1230

0.90

28.6 10030 1020


21.1 13560 1380

0.96

25.4 11300 1150


18.8 15280 1560

0.91

22.5 12730 1300

1.09 9045 P3 80 B-1061.40 1.66 9055 P3 80 B-1062.29 2.75 9065 P3 80 B-1083.50 4.16 9075 P3 80 B-108

16.7 17190 1760

1.13

20.0 14330 1460

1.33 9055 P3 90 B-1061.76 2.11 9065 P3 90 B-1082.93 3.50 9075 P3 90 B-1084.53 5.40 9075 P3 90 B-108


n1 r/min 1500 1800


Output Speedr/min



238 1480 152 2.75 286 1240 126 3.29 9025 P2 6.3 B-1024.02 4.83 9030 P2 6.3 B-102

211 1670 171 3.64 254 1390 142 4.35 9030 P2 7.1 B-102

188 1880 192 3.16 225 1570 160 3.78 9030 P2 8 B-1024.21 5.05 9035 P2 8 B-102

167 2120 2162.83

200 1770 1803.40 9030 P2 9 B-102

3.83 4.59 9035 P2 9 B-1024.27 5.08 9040 P2 9 B-102

150 2360 2412.59

180 1960 2003.10 9030 P2 10 B-102

3.29 3.94 9035 P2 10 B-1024.27 5.08 9040 P2 10 B-102

134 2640 269

2.32

161 2200 224

2.78 9030 P2 11.2 B-1023.00 3.59 9035 P2 11.2 B-1023.48 4.16 9040 P2 11.2 B-1024.48 5.35 9045 P2 11.2 B-102

120 2940 301

2.02

144 2450 251

2.40 9030 P2 12.5 B-1022.70 3.24 9035 P2 12.5 B-1023.27 3.91 9040 P2 12.5 B-1024.47 5.16 9045 P2 12.5 B-1025.00 6.00 9050 P2 12.5 B-102

107 3300 337

1.81

129 2750 281

2.18 9030 P2 14 B-1022.45 2.94 9035 P2 14 B-1022.67 3.18 9040 P2 14 B-1023.68 4.39 9045 P2 14 B-1024.13 4.94 9050 P2 14 B-102

B - 88

Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles



Output Speedr/min



93.8 3770 385

1.62

113 3140 321

1.94 9030 P2 16 B-1022.10 2.54 9035 P2 16 B-1022.62 3.13 9040 P2 16 B-1023.45 4.12 9045 P2 16 B-1023.83 4.59 9050 P2 16 B-102

83.3 4240 433

1.45

100 3530 361

1.75 9030 P2 18 B-1021.91 2.29 9035 P2 18 B-1022.16 2.56 9040 P2 18 B-1022.82 3.37 9045 P2 18 B-1023.16 3.78 9050 P2 18 B-1024.29 5.16 9055 P2 18 B-1025.00 6.00 9060 P2 18 B-104

75.0 4710 481

1.70

90.0 3930 401

2.02 9035 P2 20 B-1022.21 2.64 9040 P3 20 B-1062.78 3.33 9045 P2 20 B-1023.48 4.16 9050 P3 20 B-1064.10 4.91 9055 P2 20 B-102

67.0 5280 539

1.54

80.4 4400 449

1.83 9035 P2 22.4 B-1021.81 2.16 9040 P3 22.4 B-1062.27 2.72 9045 P2 22.4 B-1022.86 3.43 9050 P3 22.4 B-1063.29 3.94 9055 P2 22.4 B-1024.54 5.43 9060 P3 22.4 B-108

60.0 5890 601

1.43

72.0 4910 501

1.72 9035 P3 25 B-1061.78 2.13 9040 P3 25 B-1062.26 2.71 9045 P3 25 B-1062.64 3.18 9050 P3 25 B-1063.72 4.45 9055 P3 25 B-1064.40 5.27 9060 P3 25 B-108

53.6 6600 673

1.45

64.3 5500 561

1.75 9040 P3 28 B-1061.91 2.28 9045 P3 28 B-1062.18 2.62 9050 P3 28 B-1063.00 3.56 9055 P3 28 B-1063.48 4.16 9060 P3 28 B-1084.73 5.66 9065 P3 28 B-108

47.6 7420 758

1.40

57.1 6180 631

1.70 9040 P3 31.5 B-1061.83 2.20 9045 P3 31.5 B-1062.21 2.64 9050 P3 31.5 B-1062.83 3.40 9055 P3 31.5 B-1063.67 4.40 9060 P3 31.5 B-1084.72 5.64 9065 P3 31.5 B-108

42.3 8360 854

1.16

50.7 6970 711

1.37 9040 P3 35.5 B-1061.54 1.84 9045 P3 35.5 B-1061.83 2.18 9050 P3 35.5 B-1062.29 2.72 9055 P3 35.5 B-1062.89 3.45 9060 P3 35.5 B-1083.63 4.34 9065 P3 35.5 B-1084.51 5.37 9070 P3 35.5 B-108

37.5 9420 962

1.13

45.0 7850 802

1.35 9040 P3 40 B-1061.44 1.73 9045 P3 40 B-1061.70 2.02 9050 P3 40 B-1062.37 2.83 9055 P3 40 B-1062.81 3.37 9060 P3 40 B-1083.92 4.70 9065 P3 40 B-1084.32 5.18 9070 P3 40 B-108

33.3 10600 1080

0.91

40.0 8830 902


30.0 11780 1200

0.89

36.0 9820 1000


B - 89



Output Speedr/min



26.8 13190 1350

0.98

32.1 10990 1120


23.8 14840 1520

0.91

28.6 12370 1260


21.1 16730 1710

0.86

25.4 13940 1420


18.8 18850 1920

1.13

22.5 15700 1600

1.35 9055 P3 80 B-1061.85 2.23 9065 P3 80 B-1082.83 3.37 9075 P3 80 B-1084.27 5.10 9085 P3 80 B-108

16.7 21200 2160

0.91

20.0 17670 1800

1.08 9055 P3 90 B-1061.43 1.71 9065 P3 90 B-1082.37 2.83 9075 P3 90 B-1083.67 4.37 9085 P3 90 B-108


n1 r/min 1500 1800


Output Speedr/min



238 1800 184 4.95 286 1500 154 5.71 9040 P2 6.3 B-102211 2030 208 4.46 254 1700 173 5.35 9040 P2 7.1 B-102

188 2290 2343.46

225 1910 1954.15 9035 P2 8 B-102

4.22 4.86 9040 P2 8 B-1024.96 5.72 9045 P2 8 B-102

167 2580 2633.15

200 2150 2193.77 9035 P2 9 B-102

3.51 4.17 9040 P2 9 B-1024.71 5.62 9045 P2 9 B-102

150 2870 2932.71

180 2390 2443.24 9035 P2 10 B-102

3.51 4.17 9040 P2 10 B-1024.23 4.88 9045 P2 10 B-102

134 3210 328

2.46

161 2670 273

2.95 9035 P2 11.2 B-1022.86 3.42 9040 P2 11.2 B-1023.68 4.40 9045 P2 11.2 B-1024.17 5.00 9050 P2 11.2 B-102

120 3580 366

2.22

144 2980 305

2.66 9035 P2 12.5 B-1022.68 3.22 9040 P2 12.5 B-1023.68 4.24 9045 P2 12.5 B-1024.11 4.93 9050 P2 12.5 B-102

107 4010 410

2.02

129 3340 341

2.42 9035 P2 14 B-1022.20 2.62 9040 P2 14 B-1023.02 3.61 9045 P2 14 B-1023.40 4.06 9050 P2 14 B-1024.37 5.22 9055 P2 14 B-102

B - 90

Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles



Output Speedr/min



93.8 4580 468

1.73

113 3820 390

2.08 9035 P2 16 B-1022.15 2.57 9040 P2 16 B-1022.84 3.39 9045 P2 16 B-1023.15 3.77 9050 P2 16 B-1024.40 5.26 9055 P2 16 B-102

83.3 5160 527

1.57

100 4300 439

1.88 9035 P2 18 B-1021.77 2.11 9040 P2 18 B-1022.32 2.77 9045 P2 18 B-1022.60 3.11 9050 P2 18 B-1023.53 4.24 9055 P2 18 B-1024.11 4.93 9060 P2 18 B-104

75.0 5730 585

1.40

90.0 4780 488

1.66 9035 P2 20 B-1021.82 2.17 9040 P3 20 B-1062.28 2.73 9045 P2 20 B-1022.86 3.42 9050 P3 20 B-1063.37 4.04 9055 P2 20 B-1024.73 5.64 9060 P3 20 B-108

67.0 6420 655

1.87

80.4 5350 546

2.23 9045 P2 22.4 B-1022.35 2.82 9050 P3 22.4 B-1062.71 3.24 9055 P2 22.4 B-1023.73 4.46 9060 P3 22.4 B-1084.30 5.14 9065 P2 22.4 B-108

60.0 7160 731

1.86

72.0 5970 609

2.23 9045 P3 25 B-1062.17 2.62 9050 P3 25 B-1063.06 3.66 9055 P3 25 B-1063.62 4.33 9060 P3 25 B-108

53.6 8020 819

1.57

64.3 6690 683

1.88 9045 P3 28 B-1061.80 2.15 9050 P3 28 B-1062.46 2.93 9055 P3 28 B-1062.86 3.42 9060 P3 28 B-1083.89 4.65 9065 P3 28 B-1084.62 5.53 9070 P3 28 B-108

47.6 9020 921

1.51

57.1 7520 768

1.81 9045 P3 31.5 B-1061.82 2.17 9050 P3 31.5 B-1062.33 2.80 9055 P3 31.5 B-1063.02 3.62 9060 P3 31.5 B-1083.88 4.64 9065 P3 31.5 B-1084.44 5.31 9070 P3 31.5 B-108

42.3 10170 1040

1.26

50.7 8480 865

1.51 9045 P3 35.5 B-1061.51 1.80 9050 P3 35.5 B-1061.88 2.24 9055 P3 35.5 B-1062.37 2.84 9060 P3 35.5 B-1082.98 3.57 9065 P3 35.5 B-1083.71 4.42 9070 P3 35.5 B-1084.91 5.88 9075 P3 35.5 B-108

37.5 11460 1170

1.18

45.0 9550 975

1.42 9045 P3 40 B-1061.40 1.66 9050 P3 40 B-1061.95 2.33 9055 P3 40 B-1062.31 2.77 9060 P3 40 B-1083.22 3.86 9065 P3 40 B-1083.55 4.26 9070 P3 40 B-1084.68 5.60 9075 P3 40 B-108

33.3 12890 1320

1.00

40.0 10740 1100


30.0 14330 1460

0.96

36.0 11940 1220


B - 91


B - 92

Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles


Output Speedr/min



26.8 16040 1640

0.93

32.1 13370 1370


23.8 18050 1840

1.22

28.6 15040 1540

1.46 9055 P3 63 B-1061.42 1.71 9060 P3 63 B-1081.97 2.36 9065 P3 63 B-1082.20 2.64 9070 P3 63 B-1082.91 3.46 9075 P3 63 B-1083.33 3.97 9080 P3 63 B-1084.26 5.11 9085 P3 63 B-108

21.1 20340 2080

0.97

25.4 16950 1730

1.17 9055 P3 71 B-1061.11 1.33 9060 P3 71 B-1081.53 1.84 9065 P3 71 B-1081.84 2.20 9070 P3 71 B-1082.42 2.91 9075 P3 71 B-1082.88 3.44 9080 P3 71 B-1083.66 4.37 9085 P3 71 B-108

18.8 22920 23400.93

22.5 19100 19501.11 9055 P3 80 B-106

1.52 1.83 9065 P3 80 B-1082.33 2.77 9075 P3 80 B-1083.51 4.20 9085 P3 80 B-108

16.7 25790 26301.17

20.0 21490 21901.40 9065 P3 90 B-108

1.95 2.33 9075 P3 90 B-1083.02 3.60 9085 P3 90 B-108


n1 r/min 1500 1800


Output Speedr/min



238 2210 225 4.05 286 1840 188 4.67 9040 P2 6.3 B-102211 2490 254 3.65 254 2070 212 4.38 9040 P2 7.1 B-102

188 2800 2863.45

225 2330 2383.98 9040 P2 8 B-102

4.06 4.68 9045 P2 8 B-1024.92 5.65 9050 P2 8 B-102

167 3150 3222.87

200 2630 2683.41 9040 P2 9 B-102

3.85 4.60 9045 P2 9 B-1024.34 5.20 9050 P2 9 B-102

150 3500 358

2.87

180 2920 298

3.41 9040 P2 10 B-1023.46 3.99 9045 P2 10 B-1024.10 470 9050 P2 10 B-1024.92 5.65 9055 P2 10 B-102

134 3920 400

2.34

161 3270 334

2.80 9040 P2 11.2 B-1023.01 3.60 9045 P2 11.2 B-1023.41 4.09 9050 P2 11.2 B-1024.54 5.43 9055 P2 11.2 B-102

120 4380 447

2.20

144 3650 372

2.63 9040 P2 12.5 B-1023.01 3.47 9045 P2 12.5 B-1023.36 4.03 9050 P2 12.5 B-1024.10 4.70 9055 P2 12.5 B-102

107 4900 501

1.80

129 4090 417

2.14 9040 P2 14 B-1022.47 2.95 9045 P2 14 B-1022.78 3.32 9050 P2 14 B-1023.58 4.27 9055 P2 14 B-1024.40 5.25 9060 P2 14 B-104

93.8 5600 572

2.32

113 4670 477

2.77 9045 P2 16 B-1022.58 3.09 9050 P2 16 B-1023.60 4.30 9055 P2 16 B-1024.27 5.10 9060 P2 16 B-104


B - 93


Output Speedr/min



83.3 6300 644

1.90

100 5250 536

2.27 9045 P2 18 B-1022.12 2.54 9050 P2 18 B-1022.89 3.47 9055 P2 18 B-1023.36 4.03 9060 P2 18 B-1044.59 5.48 9065 P2 18 B-104

75.0 7000 715

1.87

90.0 5840 596

2.24 9045 P2 20 B-1022.34 2.80 9050 P3 20 B-1062.76 3.30 9055 P2 20 B-1023.87 4.61 9060 P3 20 B-1084.57 5.46 9065 P2 20 B-104

67.0 7840 801

1.53

80.4 6540 667

1.83 9045 P2 22.4 B-1021.92 2.30 9050 P3 22.4 B-1062.21 2.65 9055 P2 22.4 B-1023.05 3.65 9060 P3 22.4 B-1083.52 4.21 9065 P2 22.4 B-1044.72 5.63 9070 P3 22.4 B-108

60.0 8750 894

2.50

72.0 7300 745

3.00 9055 P3 25 B-1062.96 3.54 9060 P3 25 B-1084.12 4.76 9065 P3 25 B-1084.54 5.43 9070 P3 25 B-108

53.6 9800 1000

2.01

64.3 8170 834

2.40 9055 P3 28 B-1062.34 2.80 9060 P3 28 B-1083.18 3.81 9065 P3 28 B-1083.78 4.52 9070 P3 28 B-1085.00 5.98 9075 P3 28 B-108

47.6 11030 1130

1.90

57.1 9190 938

2.29 9055 P3 31.5 B-1062.47 2.96 9060 P3 31.5 B-1083.17 3.79 9065 P3 31.5 B-1083.63 4.34 9070 P3 31.5 B-1084.80 5.72 9075 P3 31.5 B-108

42.3 12430 1270

1.54

50.7 10360 1060

1.83 9055 P3 35.5 B-1061.94 2.32 9060 P3 35.5 B-1082.44 2.92 9065 P3 35.5 B-1083.03 3.61 9070 P3 35.5 B-1084.01 4.81 9075 P3 35.5 B-1084.67 5.58 9080 P3 35.5 B-108

37.5 14010 1430

1.60

45.0 11670 1190

1.90 9055 P3 40 B-1061.89 2.27 9060 P3 40 B-1082.63 3.16 9065 P3 40 B-1082.90 3.49 9070 P3 40 B-1083.83 4.58 9075 P3 40 B-1084.43 5.30 9080 P3 40 B-108

33.3 15760 1610

1.29

40.0 13130 1340

1.54 9055 P3 45 B-1061.49 1.78 9060 P3 45 B-1082.04 2.44 9065 P3 45 B-1082.43 2.90 9070 P3 45 B-1083.21 3.85 9075 P3 45 B-1083.83 4.59 9080 P3 45 B-1084.89 5.83 9085 P3 45 B-108

30.0 17510 1790

1.21

360 14590 1490

1.47 9055 P3 50 B-1061.52 1.81 9060 P3 50 B-1082.03 2.43 9065 P3 50 B-1082.25 2.69 9070 P3 50 B-1083.07 3.69 9075 P3 50 B-1083.30 3.96 9080 P3 50 B-108

26.8 19610 2000

0.98

32.1 16340 1670

1.18 9055 P3 56 B-1061.20 1.43 9060 P3 56 B-1081.56 1.87 9065 P3 56 B-1081.87 2.23 9070 P3 56 B-1082.58 3.09 9075 P3 56 B-1082.87 3.43 9080 P3 56 B-1084.01 4.80 9085 P3 56 B-108

23.8 22060 2250

1.16

28.6 18380 1880

1.40 9060 P3 63 B-1081.61 1.93 9065 P3 63 B-1081.80 2.16 9070 P3 63 B-1082.38 2.83 9075 P3 63 B-1082.72 3.25 9080 P3 63 B-1083.49 4.18 9085 P3 63 B-108


B - 94

Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles


Output Speedr/min



21.1 24860 2540

0.90

25.4 20720 2120

1.09 9060 P3 71 B-1081.25 1.50 9065 P3 71 B-1081.50 1.80 9070 P3 71 B-1081.98 2.38 9075 P3 71 B-1082.36 2.81 9080 P3 71 B-1083.00 3.58 9085 P3 71 B-108

18.8 28010 28601.24

22.5 23340 23801.50 9065 P3 80 B-108

1.90 2.27 9075 P3 80 B-1082.87 3.43 9085 P3 80 B-108

16.7 31520 32200.96

20.0 26260 26801.15 9065 P3 90 B-108

1.60 1.90 9075 P3 90 B-1082.47 2.94 9085 P3 90 B-108


n1 r/min 1500 1800





Ratio VerticalNm kgf m Nm kgf m238 3010 307 4.06 286 2510 256 4.66 9050 P2 6.3 B-102211 3390 346 3.90 254 2830 288 4.65 9050 P2 7.1 B-102188 3820 390 4.06 225 3180 325 4.66 9055 P2 8 B-102

167 4300 439 4.06 200 3580 366 4.66 9055 P2 9 B-1024.94 5.90 9060 P2 9 B-104

150 4780 488 3.61 180 3980 406 4.14 9055 P2 10 B-102

134 5350 546 3.33 161 4460 455 3.98 9055 P2 11.2 B-1024.01 4.80 9060 P2 11.2 B-104

120 5970 609 3.01 144 4970 508 3.45 9055 P2 12.5 B-1024.09 4.88 9060 P2 12.5 B-104

107 6690 6832.62

129 5570 5693.13 9055 P2 14 B-102

3.22 3.85 9060 P2 14 B-1044.19 5.00 9065 P2 14 B-104

93.8 7640 780

2.64

113 6370 650

3.16 9055 P2 16 B-1023.13 3.74 9060 P2 16 B-1044.37 5.19 9065 P2 16 B-1044.90 5.86 9070 P2 16 B-104

83.3 8600 878

2.12

100 7160 731

2.54 9055 P2 18 B-1022.46 2.96 9060 P2 18 B-1043.36 4.02 9065 P2 18 B-1044.10 4.90 9070 P2 18 B-104

75.0 9550 975

2.02

90.0 7960 813

2.42 9055 P2 20 B-1022.84 3.38 9060 P3 20 B-1083.35 4.01 9065 P2 20 B-1044.13 4.74 9070 P3 20 B-108

67.0 10700 1090

1.62

80.4 8910 910

1.94 9055 P2 22.4 B-1022.24 2.68 9060 P3 22.4 B-1082.58 3.08 9065 P2 22.4 B-1043.46 4.13 9070 P3 22.4 B-1084.34 5.20 9075 P2 22.4 B-104

60.0 11940 12203.02

72.0 9950 10203.49 9065 P3 25 B-108

3.33 3.98 9070 P3 25 B-1084.13 4.74 9075 P3 25 B-108

53.6 13370 1370

2.33

64.3 11140 1140

2.79 9065 P3 28 B-1082.77 3.32 9070 P3 28 B-1083.66 4.38 9075 P3 28 B-1084.40 5.26 9080 P3 28 B-108

47.6 15040 1540

2.32

57.1 12530 1280

2.78 9065 P3 31.5 B-1082.66 3.18 9070 P3 31.5 B-1083.52 4.20 9075 P3 31.5 B-1083.96 4.73 9080 P3 31.5 B-108

42.3 16950 1730

1.79

50.7 14130 1440

2.14 9065 P3 35.5 B-1082.22 2.65 9070 P3 35.5 B-1082.94 3.53 9075 P3 35.5 B-1083.42 4.09 9080 P3 35.5 B-1084.61 5.50 9085 P3 35.5 B-108


B - 95


Output Speedr/min



37.5 19100 1950

1.93

45.0 15920 1630

2.32 9065 P3 40 B-1082.13 2.56 9070 P3 40 B-1082.81 3.36 9075 P3 40 B-1083.25 3.89 9080 P3 40 B-1084.17 4.98 9085 P3 40 B-108

33.3 21490 2190

1.49

40.0 17910 1830

1.78 9065 P3 45 B-1081.78 2.13 9070 P3 45 B-1082.36 2.82 9075 P3 45 B-1082.81 3.37 9080 P3 45 B-1083.58 4.28 9085 P3 45 B-108

30.0 23880 2440

1.48

36.0 19900 2030

1.78 9065 P3 50 B-1081.65 1.97 9070 P3 50 B-1082.25 2.70 9075 P3 50 B-1082.42 2.90 9080 P3 50 B-1083.42 4.10 9085 P3 50 B-108

26.8 26740 2730

1.37

32.1 22280 2280

1.64 9070 P3 56 B-1081.89 2.26 9075 P3 56 B-1082.10 2.52 9080 P3 56 B-1082.94 3.52 9085 P3 56 B-108

23.8 30080 3070

1.32

28.6 25070 2560

1.58 9070 P3 63 B-1081.74 2.08 9075 P3 63 B-1082.00 2.38 9080 P3 63 B-1082.56 3.06 9085 P3 63 B-108

21.1 33900 3460

1.10

25.4 28250 2880

1.32 9070 P3 71 B-1081.45 1.74 9075 P3 71 B-1081.73 2.06 9080 P3 71 B-1082.20 2.62 9085 P3 71 B-108

18.8 38200 3900 1.40 22.5 31830 3250 1.66 9075 P3 80 B-1082.10 2.52 9085 P3 80 B-108

16.7 42980 4390 1.17 20.0 35810 3660 1.40 9075 P3 90 B-1081.81 2.16 9085 P3 90 B-108


n1 r/min 1500 1800


Output Speedr/min



188 4580 468 3.38 225 3820 390 3.88 9055 P2 8 B-102

167 5160 527 3.38 200 4300 439 3.88 9055 P2 9 B-1024.12 4.92 9060 P2 9 B-104

150 5730 582 4.24 180 4780 488 5.02 9060 P2 10 B-104

134 6420 6552.77

161 5350 5463.32 9055 P2 11.2 B-102

3.34 4.00 9060 P2 11.2 B-1044.30 5.13 9065 P2 11.2 B-104

120 7160 731 3.41 144 5970 609 4.06 9060 P2 12.5 B-1044.42 5.02 9065 P2 12.5 B-104

107 8020 8192.68

129 6690 6833.21 9060 P2 14 B-104

3.49 4.17 9065 P2 14 B-1044.25 5.07 9070 P2 14 B-104

93.8 9170 9362.61

113 7640 7803.12 9060 P2 16 B-104

3.64 4.33 9065 P2 16 B-1044.08 4.88 9070 P2 16 B-104

83.3 10310 1050

2.05

100 8600 878

2.46 9060 P2 18 B-1042.80 3.35 9065 P2 18 B-1043.42 4.08 9070 P2 18 B-1044.51 5.38 9075 P2 18 B-104

75.0 11460 11702.79

90.0 9550 9753.34 9065 P2 20 B-104

3.44 3.95 9070 P3 20 B-1084.32 5.16 9075 P2 20 B-104


B - 96

Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles


Output Speedr/min



67.0 12840 1310

2.15

80.4 10700 1090

2.57 9065 P2 22.4 B-1042.88 3.44 9070 P3 22.4 B-1083.62 4.33 9075 P2 22.4 B-1044.45 5.33 9080 P3 22.4 B-108

60.0 14330 14602.77

72.0 11940 12203.32 9070 P3 25 B-108

3.44 3.95 9075 P3 25 B-1084.24 5.06 9080 P3 25 B-108

53.6 16040 1640

2.31

64.3 13370 1370

2.76 9070 P3 28 B-1083.05 3.65 9075 P3 28 B-1083.66 4.38 9080 P3 28 B-1084.66 5.57 9085 P3 28 B-108

47.6 18050 1840

2.22

57.1 15040 1540

2.65 9070 P3 31.5 B-1082.93 3.50 9075 P3 31.5 B-1083.30 3.94 9080 P3 31.5 B-1084.46 5.34 9085 P3 31.5 B-108

42.3 20340 2080

1.85

50.7 16950 1730

2.21 9070 P3 35.5 B-1082.45 2.94 9075 P3 35.5 B-1082.85 3.41 9080 P3 35.5 B-1083.84 4.58 9085 P3 35.5 B-108

37.5 22920 2340

1.77

45.0 19100 1950

2.13 9070 P3 40 B-1082.34 2.80 9075 P3 40 B-1082.71 3.24 9080 P3 40 B-1083.47 4.15 9085 P3 40 B-108

33.3 25790 2630

1.48

40.0 21490 2190

1.77 9070 P3 45 B-1081.96 2.35 9075 P3 45 B-1082.34 2.81 9080 P3 45 B-1082.98 3.56 9085 P3 45 B-108

30.0 28650 29301.87

36.0 23880 24402.25 9075 P3 50 B-108

2.02 2.42 9080 P3 50 B-1082.85 3.42 9085 P3 50 B-108

26.8 32090 32801.57

32.1 26740 27301.88 9075 P3 56 B-108

1.75 2.10 9080 P3 56 B-1082.45 2.93 9085 P3 56 B-108

23.8 36100 36901.45

28.6 30080 30701.73 9075 P3 63 B-108

1.66 1.98 9080 P3 63 B-1082.13 2.55 9085 P3 63 B-108

21.1 40680 41501.21

25.4 33900 34601.45 9075 P3 71 B-108

1.44 1.72 9080 P3 71 B-1081.83 2.18 9085 P3 71 B-108

18.8 45840 4680 1.16 22.5 38200 3900 1.38 9075 P3 80 B-1081.75 2.10 9085 P3 80 B-108

16.7 51570 5270 0.97 20.0 42980 4390 1.16 9075 P3 90 B-1081.51 1.80 9085 P3 90 B-108


n1 r/min 1500 1800


Output Speedr/min



167 6310 644 4.44 161 5260 536 5.30 9065 P2 9 B-104150 7010 715 4.13 144 5840 596 4.70 9065 P2 10 B-104

134 7840 8013.51

161 6540 6674.20 9065 P2 11.2 B-104

4.50 5.38 9070 P2 11.2 B-104

120 8750 8943.62

144 7300 7454.11 9065 P2 12.5 B-104

4.16 4.97 9070 P2 12.5 B-104

107 9800 10002.85

129 8170 8343.41 9065 P2 14 B-104

3.48 4.15 9070 P2 14 B-1044.78 5.70 9075 P2 14 B-104


B - 97


Output Speedr/min



93.8 11210 11402.98

113 9340 9533.54 9065 P2 16 B-104

3.34 4.00 9070 P2 16 B-1044.40 5.13 9075 P2 16 B-104

83.3 12610 12902.80

100 10510 10703.34 9070 P2 18 B-104

3.69 4.40 9075 P2 18 B-1044.37 5.21 9080 P2 18 B-104

75.0 14010 14303.53

90.0 11670 11904.22 9075 P2 20 B-104

4.20 5.03 9080 P3 20 B-108

67.0 15690 16002.96

80.4 13070 13303.54 9075 P2 22.4 B-104

3.64 4.36 9080 P3 22.4 B-1084.57 5.46 9085 P2 22.4 B-104

60.0 17510 17902.81

72.0 14590 14903.23 9075 P3 25 B-108

3.47 4.14 9080 P3 25 B-1084.43 5.20 9085 P3 25 B-108

53.6 19610 20002.50

64.3 16340 16702.99 9075 P3 28 B-108

3.00 3.59 9080 P3 28 B-1083.81 4.56 9085 P3 28 B-108

47.6 22060 22502.40

57.1 18380 18802.86 9075 P3 31.5 B-108

2.70 3.22 9080 P3 31.5 B-1083.65 4.37 9085 P3 31.5 B-108

42.3 24860 25402.00

50.7 20720 21202.40 9075 P3 35.5 B-108

2.33 2.79 9080 P3 35.5 B-1083.14 3.75 9085 P3 35.5 B-108

37.5 28010 28601.91

45.0 23340 23802.29 9075 P3 40 B-108

2.21 2.65 9080 P3 40 B-1082.84 3.40 9085 P3 40 B-108

33.3 31520 32201.60

40.0 26260 26801.92 9075 P3 45 B-108

1.91 2.29 9080 P3 45 B-1082.44 2.91 9085 P3 45 B-108

30.0 35020 35801.65

36.0 29180 29801.98 9080 P3 50 B-108

2.33 2.80 9085 P3 50 B-108

26.8 39220 40001.43

32.1 32680 33401.71 9080 P3 56 B-108

2.00 2.40 9085 P3 56 B-10823.8 44120 4500 1.74 28.6 36770 3750 2.09 9085 P3 63 B-10821.1 49720 5080 1.50 25.4 41440 4230 1.79 9085 P3 71 B-10818.8 56030 5720 1.43 22.5 46690 4770 1.71 9085 P3 80 B-10816.7 63030 6440 1.23 20.0 52530 5360 1.47 9085 P3 90 B-108


B - 98

Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

Applicable to configurations: RML

Applicable to configurations: RMR

L.SpeedShaft

Speedr/min

Size of Reducer

9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085250 11.8 17.7 17.7 29.4 29.9 32.4 37.8 46.6 39.7 49.1 44.1 77.0 77.0 100.1160 11.8 17.7 20.1 31.4 32.4 33.8 39.7 48.1 41.7 50.5 46.1 89.0 89.0 108.9100 11.8 17.7 25.0 35.3 38.7 39.2 47.1 53.5 47.6 54.4 54.4 99.0 99.0 122.1

63 11.8 17.7 26.5 35.3 42.2 47.1 54.9 62.3 58.9 64.3 65.2 131.5 131.5 125.640 11.8 17.7 26.5 35.3 42.2 49.1 54.9 67.7 71.1 78.0 79.0 141.0 141.0 125.125 11.8 17.7 26.5 35.3 42.2 49.1 54.9 67.7 81.4 95.2 99.1 139.5 139.5 122.6

250 71.1 93.7 70.1 122.5 122.5 141.8160 78.0 94.7 77.5 137.5 137.5 132.4100 81.4 98.1 92.2 149.5 149.5 127.063 81.4 98.1 114.8 149.0 149.0 125.640 81.4 98.1 117.7 148.5 148.5 125.125 81.4 98.1 117.7 147.0 147.0 122.6

L.SpeedShaft

Speedr/min

Size of Reducer

9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085250 8.3 15.2 9.8 21.6 19.1 21.6 22.6 31.4 16.7 28.4 17.2 44.0 44.0 58.4160 9.8 17.7 12.3 23.1 20.6 23.1 24.0 31.4 18.1 27.0 17.7 55.5 55.5 64.3100 11.8 17.7 16.7 29.4 26.0 27.5 28.4 35.3 22.1 30.4 25.5 63.5 63.5 74.6

63 11.8 17.7 21.6 35.3 32.9 35.3 37.3 42.7 33.4 38.3 33.8 95.0 95.0 104.540 11.8 17.7 26.5 35.3 41.7 43.7 48.6 55.4 45.1 51.5 47.6 129.0 129.0 146.725 11.8 17.7 26.5 35.3 42.2 49.1 61.6 67.7 60.8 68.7 67.7 167.0 167.0 171.2

250 46.1 74.6 40.2 90.0 90.0 114.8160 52.0 72.1 45.6 103.5 103.5 125.1100 60.3 79.1 59.4 116.0 116.0 140.8

63 81.4 96.6 80.0 152.5 152.5 174.140 81.4 98.1 108.9 192.0 192.0 191.825 81.4 98.1 117.7 180.5 180.5 171.2

L.SpeedShaft

Speedr/min

Size of Reducer

9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085250 9.3 11.4 14.7 23.1 26.5 31.4 32.9 31.9 27.0 43.2 28.0 28.0 23.5 23.5160 9.3 11.4 18.1 23.1 28.4 31.4 33.4 31.9 28.9 43.2 28.4 28.4 27.5 27.5100 9.3 11.4 24.5 23.1 32.9 31.4 37.3 31.9 34.3 43.2 39.7 39.7 32.9 32.9

63 9.3 11.4 26.5 23.1 32.9 31.4 37.3 31.9 49.1 43.2 52.5 52.5 45.6 45.640 9.3 11.4 26.5 23.1 32.9 31.4 37.3 31.9 49.1 43.2 61.4 61.4 63.3 60.325 9.3 11.4 26.5 23.1 32.9 31.4 37.3 31.9 49.1 43.2 61.4 61.4 67.7 60.3

250 23.1 34.8 18.6 18.6 56.9 56.9160 25.0 33.4 21.1 21.1 56.9 56.9100 29.4 36.8 27.5 27.5 56.9 56.9

63 39.2 43.2 36.3 36.3 56.9 56.940 39.2 43.2 49.1 49.1 56.9 56.925 39.2 43.2 56.9 56.9 56.9 56.9


Sheet 1

Sheet 2




Heavyduty

bearingmodel


Heavyduty

bearingmodel


Heavyduty

bearingmodel

B - 99

Parallel



Consult us when a load is not in the center. 2. Consult us for the blanks in the table. 3. Consult us when the radial load is applied upward.




Flat Belt 2.5


B - 100

Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

Applicable to configurations: RML

Applicable to configurations: RMR

L.SpeedShaft

Speedr/min

Size of Reducer

9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085250 1200 1800 1800 3000 3050 3300 3850 4750 4050 5000 4500 7850 7850 10200160 1200 1800 2050 3200 3300 3450 4050 4900 4250 5150 4700 9050 9050 11100100 1200 1800 2550 3600 3950 4000 4800 5450 4850 5550 5550 10100 10100 12450

63 1200 1800 2700 3600 4300 4800 5600 6350 6000 6550 6650 13400 13400 1280040 1200 1800 2700 3600 4300 5000 5600 6900 7250 7950 8050 14350 14350 1275025 1200 1800 2700 3600 4300 5000 5600 6900 8300 9700 10100 14200 14200 12500

250 7250 9550 7150 12500 12500 14450160 7950 9650 7900 14000 14000 13500100 8300 10000 9400 15250 15250 1295063 8300 10000 11700 15200 15200 1280040 8300 10000 12000 15150 15150 1275025 8300 10000 12000 15000 15000 12500

L.SpeedShaft

Speedr/min

Size of Reducer

9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085250 850 1550 1000 2200 1950 2200 2300 3200 1700 2900 1750 4500 4500 5950160 1000 1800 1250 2350 2100 2350 2450 3200 1850 2750 1800 5650 5650 6550100 1200 1800 1700 3000 2650 2800 2900 3600 2250 3100 2600 6450 6450 7600

63 1200 1800 2200 3600 3350 3600 3800 4350 3400 3900 3450 9700 9700 1065040 1200 1800 2700 3600 4250 4450 4950 5650 4600 5250 4850 13150 13150 1495025 1200 1800 2700 3600 4300 5000 5600 6900 6200 7000 6900 17000 17000 17450

250 4700 7600 4100 9150 9150 11700160 5300 7350 4650 10550 10550 12750100 6150 8050 6050 11800 11800 1435063 8300 9850 8150 15550 15550 1775040 8300 10000 11100 19550 19550 1955025 8300 10000 12000 18400 18400 17450

L.SpeedShaft

Speedr/min

Size of Reducer

9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085250 950 1160 1500 2350 2700 3200 3350 3250 2750 4400 2850 2850 2400 2400160 950 1160 1850 2350 2900 3200 3400 3250 2950 4400 2900 2900 2800 2800100 950 1160 2500 2350 3350 3200 3800 3250 3500 4400 4050 4050 3350 335063 950 1160 2700 2350 3350 3200 3800 3250 5000 4400 5350 5350 4650 465040 950 1160 2700 2350 3350 3200 3800 3250 5000 4400 6260 6260 6450 615025 950 1160 2700 2350 3350 3200 3800 3250 5000 4400 6260 6260 6900 6150

250 2350 3550 1900 1900 5800 5800160 2550 3400 2150 2150 5800 5800100 3000 3750 2800 2800 5800 580063 4000 4400 3700 3700 5800 580040 4000 4400 5000 5000 5800 580025 4000 4400 5800 5800 5800 5800


Sheet 1

Sheet 2




Heavyduty

bearingmodel


Heavyduty

bearingmodel


Heavyduty

bearingmodel

B - 101



Consult us when a load is not in the center. 2. Consult us for the blanks in the table. 3. Consult us when the radial load is applied upward.




Flat Belt 2.5


1. Key and keyways are based on ISO R773-1969 Close keys (JIS B1301-1996) Parallel key in fastening type)2. The oil quantity is approximate. Oil shall be supplied within the range shown on the oil gauge.


Refer to the page D -18 for details. Refer to the page D -18 for details.

L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2

RML RMR

B - 102

Slow Speed Shaft


Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

PP

H N

C1

N1

NP

HL

N2

B A

MM

OE1

G

KK

D Y GL

4- J

RC2

RC1

RI

MC

E2 E3

CM

A

MB

MD

4. Refer to the page D -25 for the dimension of optional parts.5. Refer to the page D-33 for motor terminal box position.6. Refer to the page D-34 for flange dimension.3. Refer to the page D-12 for dimensions not shown in these drawings.

DIMENSIONS Parallel Shaft Double Reduction Vertical Mounting 9015 9055

B - 103

Nomenclature

H

L



Backstop(Option)


90159025903090359040904590509055

RMLRMR

Size A B C1 C D E1 E2 E3 G H RI J K L M N N1 N2 NP O P Y

9015 295 160 194

Seebelow

140 270 195 135 20 35 80 15 95 440 70 186 25 14 100 230 102.5 2609025 346 175 227 155 310 215 155 20 40 87.5 19 110 505 75 198.5 23 12 100 270 117.5 3109030 406 200 264 175 320 220 160 25 50 105 24 120 590 85 211 22 9 100 270 132.5 3659035 437 219 295 194 370 245 185 25 50 120 24 120 640 100 211 22 9 100 320 132.5 3969040 467 235 306 205 400 260 200 30 60 128 28 150 685 100 239 15 2 117 340 157.5 4209045 506 256 345 226 440 266 220 30 60 140 28 150 745 120 239 17.5 2 117 380 157.5 4599050 537 255 358 225 420 270 210 30 60 140 28 150 775 110 259 23 7 117 360 172.5 4909055 576 286 397 256 490 305 245 30 60 155 28 150 845 135 259 23 7 117 430 172.5 529

Size RC1 RC2 Oil Oty(L) Wt. (kg)*)

9015 3/4" 3/4" 5 1259025 3/4" 3/4" 7 1709030 3/4" 3/4" 9 2359035 3/4" 3/4" 12 2559040 1" 1" 18 3459045 1" 1" 22 4059050 1" 1" 22 4859055 1" 1" 31 550

kWMotor C Mass of Motor

MountingFlange (kg)

Mass of Motor (kg)Without Brake With Brake MD 9015 9025 9030 9035 9040 9045 9050 9055 Without

BrakeWith

BtakeMA MG MC MA MB MC5.5 382 212 315 454 212 315 144 397.5 8 43 547.5 415 251 315 510 251 315 185 397.5 427.5 8 57 7711 480 251 350 575 251 350 188 427.5 457.5 515.5 11 76 9615 545 324 350 700 324 350 232 427.5 457.5 515.5 515.5 11 131 175

18.5 625 394 400 835 394 400 297 427.5 457.5 515.5 515.5 555.5 555.5 17 213 25822 625 394 400 835 394 400 297 427.5 457.5 515.5 515.5 555.5 555.5 17 213 25830 625 394 400 835 394 400 297 457.5 515.5 515.5 555.5 555.5 589.5 589.5 17 224 28037 715.5 394 450 930.5 394 450 297 487.5 545.5 545.5 585.5 585.5 619.5 619.5 15 259 32045 715.5 394 450 930.5 394 450 297 545.5 585.5 585.5 619.5 619.5 15 259 32055 769.5 484 550 412 585.5 585.5 619.5 619.5 29 27675 799 490 545 485 619.5 619.5 31 49090 799 490 545 485 619.5 31 540


TU1 T1 U1 V1 W1/Depth Key TU2 T2 U2 V2 V3 TU4 T4 U4 V4 V5X1 Y1 Z1 L1

9015 245 135 110 58m6 M20/42 18 7 11 95 328 193 135 63 60 270 135 135 55 559025 285 145 140 70m6 M20/42 20 7.5 12 125 358 213 145 73 70 300 150 150 65 659030 330 160 170 80m6 M20/42 22 9 14 150 393 233 160 83 80 330 165 165 75 759035 330 160 170 90m6 M20/42 25 9 14 150 403 243 160 88 85 330 165 165 85 859040 349 179 170 95m6 M24/50 25 9 14 150 448 268 180 98 95 360 180 180 90 909045 391 181 210 105m6 M24/50 28 10 16 190 463 283 180 108 105 370 185 185 105 1059050 411 201 210 110m6 M24/50 28 10 16 190 503 303 200 108 105 410 205 205 105 1059055 411 201 210 120m6 M24/50 32 11 18 185 528 323 205 123 120 410 205 205 115 115

(blank)T

K

: Solid Shaft: Hollow Shaft


SizeShaft

Arrangement

Low Speed ShaftType


P V A P 2 - -

Unit: mm

*) Mass of drive unit with motor, add mass of motor flangeand mass of motor, shown in table below.


90159025903090359040904590509055

PV

AP

90159055

2PARAMAX

VerticalMonoblock

ParallelDouble

Reduction


NP

N

N1

PP

H

P1

C1

4- J

B A

E1 O

MM

K KG D Y G

L

RI

RC2

RC1

E2 E3

CM

A

MB

MC

MD




L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2

RML RMR

B - 104

Slow Speed Shaft


Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

3. Shaft arrangement RMR is equipped with oil gauge. Refer to the page D-28.

4. Refer to the page D-14 for dimensions not shown in these drawings.5. Refer to the page D -28 for the dimension of optional parts.6. Refer to the page D-33 for motor terminal box position.7. Refer to the page D-34 for flange dimension.


B - 105

Nomenclature

H

L



Backstop(Option)



906090659070907590809085

Size

906090659070907590809085

RMLRMR

Size A B C1 C D E1 E2 E3 G H RI J K L M N N1 NP O P P1 Y

9060 621 299 414

Seebelow

251 530 282 265 35 35 160 35 180 885 140 277.5 35 117 460 190 223 5649065 667 338 460 290 600 317 300 35 35 175 35 180 970 175 277.5 38 117 530 190 223 6109070 719 336 482 283 600 317 300 40 40 175 42 215 1020 155 304 38 117 520 215 253 6579075 772 383 535 330 670 352 335 40 52 160 42 220 1120 195 304 40 117 590 215 253 7109080 812 378 556 325 670 352 335 40 52 190 42 220 1155 170 322.5 45 117 590 230 283 7509085 868 422 612 369 750 392 375 40 52 215 42 220 1255 210 322.5 40 117 670 230 283 806


9060 1" 1" 25 7059065 1" 1" 32 8309070 1" 1" 39 9859075 1" 1" 49 12459080 1" 1" 54 13809085 1" 1" 71 1650


MountingFlange (kg)


MD 9060 9065 9070 9075 9080 9085 WithoutBrake

WithBtakeMA MG MC MA MB MC

37 715.5 394 450 930.5 394 450 297 694 694 15 259 32045 715.5 394 450 930.5 394 450 297 694 694 15 259 32055 769.5 484 550 412 694 694 29 27675 799 490 545 485 694 694 744 744 31 49090 799 490 545 485 694 694 744 744 31 540110 898 550 655 515 724 774 774 838 838 56 675




9060 440 230 210 125m6 M24/50 32 11 18 185 583 353 230 128 125 470 235 235 125 1239065 484 234 250 140m6 M30/60 36 12 20 225 594 359 235 143 140 480 240 240 145 1439070 509 259 250 145m6 M30/60 36 12 20 225 644 384 260 148 145 530 265 265 145 1439075 562 262 300 160m6 M30/60 40 13 22 275 651 386 265 158 155 530 265 265 150 1489080 582 282 300 165m6 M30/60 40 13 22 275 714 429 285 173 170 570 285 285 165 1639085 585 285 300 175m6 M30/60 45 15 25 270 714 429 285 183 180 570 285 285 175 173

P V D P 2 - -

Unit: mm

PV

DP

90609085

2PARAMAX

VerticalSplit

ParallelDouble

Reduction



(blank)T

K

: Solid Shaft: Hollow Shaft


ShaftArrangement

Low Speed ShaftType


NHP

P

N1

C1

NP

HL

194 (9015 Only )

4- JY

AB

D

K

L

K

G G

M1

M1

OE1

RI

RC1

RC2

M2

E2 E3

CM

A

MB

MC

MD




L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2

RML RMR

B - 106

Slow Speed Shaft


Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

3. Refer to the page D-13 for dimensions not shown in these drawings.

4. Refer to the page D -25 for the dimension of optional parts.5. Refer to the page D-33 for motor terminal box position.6. Refer to the page D-34 for flange dimension.

DIMENSIONS Parallel Shaft Triple Reduction Vertical Mounting 9015 9055

B - 107

Nomenclature

H

L



Backstop(Option)



90159025903090359040904590509055

Size A B C1 C D E1 E2 E3 G H RI J K L M1 M2 N N1 NP O P Y

9015 338 160 257

Seebelow

140 270 195 135 20 35 80 15 95 485 70 80 186 25 100 230 102.5 3059025 408 175 306 155 310 215 155 20 40 87.5 19 110 570 75 90 198.5 23 100 270 117.5 3759030 453 200 343 175 320 220 160 25 50 105 24 120 640 85 50 211 22 100 270 132.5 4159035 484 219 374 194 370 245 185 25 50 120 24 120 690 100 75 211 22 100 320 132.5 4469040 540 235 398 205 400 260 200 28 60 120 28 150 759 100 70 228.5 15 100 340 157.5 4949045 577 256 437 226 440 277 220 30 60 140 28 150 819 120 90 228.5 17.5 100 380 157.5 5339050 609 255 467 225 420 270 210 30 60 140 28 150 848 110 83 248.5 23 100 360 172.5 5639055 648 286 506 256 490 305 245 30 60 155 28 150 918 135 118 248.5 23 100 430 172.5 602

Size RC1 RC2 Oil Oty(L) Wt. (kg)

9015 3/4" 3/4" 6 1259025 3/4" 3/4" 8 1759030 3/4" 3/4" 10 2359035 3/4" 3/4" 14 2609040 1" 1" 18 3409045 1" 1" 22 4109050 1" 1" 25 4909055 1" 1" 35 555

kWC Mass of Motor

MountingFlange (kg)

Mass of Motor (kg)

MD 9015 9025 9030 9035 9040 9045 9050 9055 WithoutBrake


5.5 382 212 315 454 212 315 144 376.5 405.5 457.5 457.5 497.5 497.5 8 43 547.5 415 251 315 510 251 315 185 376.5 405.5 457.5 457.5 497.5 497.5 510.5 510.5 8 57 7711 480 251 350 575 251 350 188 406.5 435.5 487.5 487.5 527.5 527.5 590.5 590.5 11 76 9615 545 324 350 700 324 350 232 406.5 435.5 487.5 487.5 527.5 527.5 590.5 590.5 11 131 175

18.5 625 394 400 835 394 400 297 435.5 487.5 487.5 527.5 527.5 590.5 590.5 17 213 25822 625 394 400 835 394 400 297 435.5 487.5 487.5 527.5 527.5 590.5 590.5 17 213 25830 625 394 400 835 394 400 297 487.5 487.5 527.5 527.5 590.5 590.5 17 224 28037 715.5 394 450 930.5 394 450 297 517.5 557.5 557.5 620.5 620.5 15 259 32045 715.5 394 450 930.5 394 450 297 557.5 557.5 620.5 620.5 15 259 32055 769.5 484 550 412 620.5 620.5 29 276





P V A P 3 - -

Unit: mm

Size

90159025903090359040904590509055

RMLRMR

PV

AP

90159055

3PARAMAX

VerticalMonoblock

ParallelTriple

Reduction



(blank)T

K



ShaftArrangement

Low Speed ShaftType


4- J

AB

K K

GG D Y

L

M1

M1

OE1

RC2

RC1

RI

M2

NP

N

PP H

N1

P1

C1

E2 E3

CM

A

MB

MC

MD




L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2

RML RMR

B - 108

Slow Speed Shaft


Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

4. Refer to the page D-15 for dimensions not shown in these drawings.5. Refer to the page D -28 for the dimension of optional parts.6. Refer to the page D-33 for motor terminal box position.7. Refer to the page D-34 for flange dimension.


3. Shaft arrangement RMR is equipped with oil gauge. Refer to the page D-28.

B - 109

Nomenclature

H

L



Backstop(Option)



906090659070907590809085

P V D P 3 - -

Unit: mm

Size

906090659070907590809085

RMLRMR

Size A B C1 C D E1 E2 E3 G H RI J K L M M2 N N1 NP O P P1 Y

9060 701 299 540

Seebelow

251 530 282 265 35 35 160 35 180 970 140 118 277.5 35 117 460 190 223 6499065 747 338 586 290 600 317 300 35 35 175 35 180 1055 175 153 277.5 38 117 530 190 223 6959070 809 336 630 283 600 317 300 40 40 175 42 215 1115 155 128 304 38 117 520 215 253 7529075 862 383 683 330 670 352 335 40 52 190 42 220 1215 195 163 304 40 117 590 215 253 8059080 932 378 725 325 670 352 335 40 52 190 42 220 1275 170 140 322.5 45 117 590 230 283 8709085 988 422 781 369 750 392 375 40 52 215 42 220 1375 210 180 322.5 40 117 670 230 283 926


9060 1" 1" 32 7309065 1" 1" 35 8859070 1" 1" 53 10309075 1" 1" 67 12559080 1" 1" 65 14609085 1" 1" 89 1730


MountingFlange (kg)

Mass of Motor (kg)With Brake Without Brake

MD 9060 9065 9070 9075 9080 9085 WithoutBrake


11 480 251 350 575 251 350 188 633 633 11 76 9615 545 324 350 700 324 350 232 633 633 11 131 175

18.5 625 394 400 835 394 400 297 633 633 683 683 17 213 25822 625 394 400 835 394 400 297 633 633 683 683 17 213 25830 625 394 400 835 394 400 297 633 633 683 683 749 749 17 224 28037 715.5 394 450 930.5 394 450 297 663 663 713 713 779 779 15 259 32045 715.5 394 450 930.5 394 450 297 663 663 713 713 779 779 15 259 32055 769.5 484 550 412 663 663 713 713 779 779 29 27675 799 490 545 485 663 663 713 713 779 779 31 49090 799 490 545 485 713 713 779 779 31 540110 898 550 655 515 743 809 809 56 675




9060 440 230 210 125m6 M24/50 32 11 18 185 583 353 230 128 125 470 235 235 125 1239065 484 234 250 140m6 M30/60 36 12 20 225 594 359 235 143 140 480 240 240 145 1439070 509 259 250 145m6 M30/60 36 12 20 225 644 384 260 148 145 530 265 265 145 1439075 562 262 300 160m6 M30/60 40 13 22 275 651 386 265 158 155 530 265 265 150 1489080 582 282 300 165m6 M30/60 40 13 22 275 714 429 285 173 170 570 285 285 165 1639085 585 285 300 175m6 M30/60 45 15 25 270 714 429 285 183 180 570 285 285 175 173

PV

DP

90609085

3PARAMAX

VerticalSplit

ParallelTriple

Reduction



(blank)T

K



ShaftArrangement

Low Speed ShaftType


B - 110

Drive Unit

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles


Size of Reducer

9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085

6.3 6.378 6.111

7.1 6.875 6.973

8 8.118 7.950 7.778 7.770

9 8.750 8.643 8.875 8.839

10 10.303 10.118 9.608 9.889

11.2 11.106 11.000 10.963 11.250

12.5 12.756 12.842 12.222 12.216

14 13.750 13.962 13.946 13.897

16 15.897 15.899 15.556 15.540

18 17.135 17.286 17.750 17.679

20 20.091 19.814 19.620 19.778 19.790 19.181 19.950

22.4 21.656 21.542 22.388 22.500 22.530 22.351 22.353

25 25.137 25.041 24.444 24.945 25.935 24.662 25.137 24.053 24.938 24.700

28 27.096 27.225 27.893 28.379 29.526 27.706 29.291 27.509 27.941 27.718

31.5 32.455 31.331 31.694 31.079 31.969 32.319 30.157 31.521 31.129 30.875

35.5 34.983 34.063 36.165 35.357 36.395 36.309 35.140 36.050 34.879 34.647

40 40.607 40.451 39.487 40.296 41.895 39.838 39.520 37.815 38.912 38.541

45 43.770 43.979 45.058 45.843 47.695 44.756 46.051 43.250 43.599 43.250

50 51.141 50.611 49.942 50.205 51.869 52.207 50.273 49.557 49.500 48.176

56 55.125 55.025 56.987 57.115 59.051 58.652 58.582 56.678 55.462 54.062

63 63.986 53.741 62.222 63.497 64.640 64.637 63.984 63.041 63.000 61.286

71 68.971 69.300 71.000 72.237 73.590 72.617 74.559 72.101 70.588 68.773

80 79.751 77.989 79.111 79.341 80.552 78.377 80.234 78.120 78.000 79.124

90 86.706 88.991 90.000 90.326 90.496 91.330 91.765 87.529 87.529 87.269

100 99.259 99.158 103.97 98.871 102.71 98.282 97.650 96.720 96.444 96.432

112 113.26 112.81 118.37 111.08 119.69 112.41 109.41 108.54 106.37 105.89

125 122.72 126.20 130.09 129.57 127.97 128.80 127.97 120.90 126.39 117.54

140 140.03 143.57 148.10 145.56 149.12 147.31 143.38 135.67 139.40 129.07

160 156.02 158.68 162.11 156.75 160.47 152.99 158.44 158.25 154.04

180 177.50 180.65 182.13 182.66 183.53 171.41 177.79 174.54 169.14

200 207.95 197.74 205.42 196.56 191.23 189.41 192.89 192.86

224 236.74 222.15 239.37 224.81 214.26 215.55 212.75 211.77

250 260.18 259.14 255.94 257.59 250.61 236.76 252.78 235.08

280 296.20 291.13 298.24 294.61 280.79 265.69 278.80 258.13

315 315.95 324.22 332.51 320.94 322.08 310.27 318.63 308.07

355 367.08 364.25 369.46 367.06 343.56 348.18 355.25 338.28

400 388.53 409.25 399.38 386.60

450 451.41 454.72 426.01 431.03

Exact Reduction Ratio Drive Unit Right Angle Shaft

B - 111


Size of Reducer

9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085

6.3 6.257 6.193 6.314 6.049 6.470 6.188 6.246 6.429

7.1 7.237 7.067 6.806 6.903 7.366 7.210 6.998 7.090

8 7.889 7.616 8.118 7.869 7.778 7.691 7.956 8.062 7.875 7.759 8.033 7.733 8.167 7.835

9 9.125 8.690 8.750 8.556 8.875 8.750 9.057 9.058 9.176 8.874 9.000 8.677 9.007 8.603

10 10.143 9.722 9.944 10.118 9.528 9.889 10.156 9.914 9.750 9.875 9.665 9.945 9.905 9.953

11.2 11.732 11.094 10.719 11.000 10.872 11.250 11.562 11.138 11.361 11.294 10.829 11.160 10.924 10.929

12.5 12.710 12.407 12.785 12.394 12.485 12.114 12.594 12.656 12.206 12.226 12.600 11.966 12.762 12.071

14 14.701 14.158 13.781 13.475 14.247 13.781 14.337 14.219 14.224 13.983 14.118 13.428 14.076 13.255

16 15.778 15.340 15.997 15.935 15.556 15.874 16.504 15.694 15.996 15.306 15.750 15.600 15.556 15.554

18 18.250 17.503 17.243 17.325 17.750 18.059 18.789 17.631 18.640 17.506 17.647 17.506 17.157 17.078

20 19.894 19.681 20.280 19.938 19.884 19.778 19.590 20.566 18.987 20.059 20.067 19.500 20.054 18.958

22.4 23.011 22.457 21.860 21.676 22.689 22.500 22.303 23.105 22.125 22.941 22.484 21.882 22.119 20.817

25 24.696 24.332 25.374 25.277 24.774 25.281 25.673 24.413 24.883 23.810 25.083 28.844 24.444 24.441

28 28.565 27.764 27.350 27.481 28.269 28.761 29.227 27.426 28.995 27.231 28.105 27.880 26.961 26.838

31.5 31.401 31.905 32.876 31.625 31.213 31.498 30.855 31.992 29.905 31.202 31.500 31.056 31.601 29.792

35.5 36.321 36.406 35.438 34.383 35.617 35.833 35.127 35.942 34.848 35.686 35.294 34.850 34.854 32.712

40 38.980 39.444 41.134 40.976 38.889 39.686 40.435 38.450 39.190 37.500 39.375 39.000 38.519 38.514

45 45.088 45.009 44.338 44.550 44.375 45.148 46.033 43.197 45.667 42.889 44.118 43.765 42.484 42.289

50 51.141 51.268 49.248 49.444 49.634 50.388 48.825 49.144 51.188 48.750 51.845 46.944

56 55.125 55.739 56.195 56.250 56.507 56.608 56.894 56.206 57.353 54.706 57.182 51.547

63 63.986 63.741 61.358 62.615 65.045 61.852 63.984 61.225 63.984 63.375 63.194 63.186

71 68.971 69.300 70.014 71.234 74.051 69.488 74.559 70.024 71.691 71.118 69.700 69.381

80 79.751 78.012 81.056 80.234 79.219 77.018

90 86.706 88.750 91.063 91.765 88.897 84.569

Exact Reduction Ratio Drive Unit Parallel Shaft

B - 112

memo

Standard Specifications C- 2 Construction Drawing C- 3 Nomenclature C- 4 Selection Flowchart and Formula for Selection C- 6 Service Factor C- 8 Right Angle Shaft C- 11 Parallel Shaft C-105

<Reducer: Right Angle Shaft Horizontal Mounting>

<Reducer: Parallel Shaft-Horizontal Mounting>

C

Reducer

ItemStandard Specification

Mounting High Speed Shaft Speed

LubricationMethod

Horizontal Shaft 750 1800r/minOil bath lubricationIn case of high speed shaft speed is less than 750r/min, electric pump lubrication may be used. Consult SUMITOMO for details.

Vertical Shaft 400 1800r/min

Pump lubrication(Two different pump lubrication systems are available; shaft connected pump lubrication and electric pump lubrication. For details, refer to the outside dimension drawing.)

Upright Shaft 750 1800r/min Oil bath lubricationGrease lubrication for right angle input shaft.

Lubricant Refer to the page D-2.

Gear Type Involute external gear

InstallationLocation Indoor (Minimal dust and humidity)

AmbientTemperature

10 40A cooling fan may provided depending on the usage (Note 1)

AmbientHumidity Under 85%

Elevation Under 1,000 meters

Atmosphere Well ventilated location, free of corrosive gases, explosive gases, vapors and dust.

Installation Horizontal installationRefer to the page D-2

Method of Coupling with

Driven MachineCoupling, gears, chain sprocket or belt.

Painting

Surface preparation: Shot blasting after washing before machiningInside painting: UNI GROUND PTC primer is sprayed onceOutside painting: For prime-coating, UNI GROUND PTC primer is sprayed once. For final coating, NEO ALKYS is sprayed once.Painting color: MANSEL 6.5PB 3.6/8.2, Refer to the page D-3.

Note 1: In general, a heating or cooling system is necessary in case the ambient temperature is lower than -10°C or higher than +50°C.

Red

ucer

Ambi

ent C

ondi

tions

C - 2

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

Reducer Standard Specifications

1 2 3 4 5 6 7 8 9 10

13 121415161718 11

19 20 21

<Reducer: Right Angle Triple Reduction>

<Reducer: Parallel Shaft Triple Reduction>

Ref.No. Part Name Ref.No. Part Name Ref.No. Part Name Ref.No. Part Name

1 Housing 7 Taper roller bearing 13 Bearing housing 19 Helical gear

2 Helical gear 8 Bevel gear 14 Oil pump 20 Collar

3 Slow speed shaft 9 Spherical roller bearing 15 Helical gear 21 Helical pinion shaft

4 Taper roller bearing 10 Bevel pinion shaft 16 Taper roller bearing

5 Helical pinion shaft 11 Oil seal 17 Collar

6 Helical pinion shaft 12 Taper roller bearing 18 Oil seal

C - 3

Reducer Construction Drawing

P H D R 39075

1. For shaft arrangement, refer to the dimension sheets.2. Consult us for reduction ratios smaller than 6.3.

P

H 2RkNm

Series Mounting Shaft Position Number of Gear Stages

Horizontal

Vertical

Right Angle

Parallel

Upright

Monoblock

Split

Double Reduction

Triple Reduction

Quadruple Reduction

Housing Size Torque

Paramax

Reducer Nomenclature

V

W

3

4

P

A

D

9015 2.6

9025 4.2

9030 6.4

9035 8.5

9040 10.1

9045 13.2

9050 15.3

9055 19.9

9060 24.4

9065 31.4

9070 38.2

9075 47.8

9080 58.5

9085 73.1

9090 85.9

9095 101

9100 122

9105 144

9110 174

9115 207

9118 260

9121 301

9126 351

9128 420

9131 473

9136 552

C - 4

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

RL 35.5K F

K

T

6.3 7.1 8 9 10 11.2 12.5 14 16 18 20 22.4 25 28 31.5 35.5 40 45 50

56 63 71 80 90100112125140160180200224250280315355400450

6.3 7.1 8 9 10 11.2 12.5 14 16 18 20 22.4 25 28 31.5 35.5 40 45 50

56 63 71 80 90100112125140160180200224250280315355400450500

BW

Slow Speed Shaft Nominal Ratio

Right Angle Shaft

Mounting for Upright Option

Solid Shaft

Hollow Shaft(Shrink Disk Type)

Parallel Shaft

Without option

With fan

Shaft Arrangement

Wall Mount(Upright Mounting)

Hollow Shaft(Key Type)

LB

LL

LR

RB

RL

RR

LB

LL

LR

RB

RL

RR

BB

BR

BL

F

FBWith backstop

With fan & backstop

Reducer Nomenclature

C - 5

Reference page No.

C - 6

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

Reducer Selection

Determine the service factor

Calculate Equivalent Transmission Power

Determine Nomenclature

Determine Size

Determine page number indicating

Dimension Table.

P E P

Determine Overhang Factor

Calculate Equivalent Radial Load

Calculate Equivalent Thrust Load

Equivalent transmission power

Mechanical power rating

Right angle shaft: Page C12 C-41


NoHeavy duty bearing.Consult us for larger overhang load.

Model Select

Yes

Check Overhang LoadF rE

F rA

F XE

F XA+ 1

Is overhang load applied?

Yes

No

Determine Temperature Correction Factor

Ta Temperature correction factor

PT Thermal power rating

Right angle shaft: Page C12 C-41


Yes

Consult us for mandatory cooling

system, such as oil cooler.

Check Thermal Power

P T Ta P M No

Ambient condition

P M Actual transmission power or motor

Service factor Page C-8 C-9

Refer to the bottom row of Mechanical

Power Rating Table for page number

of dimensional drawing.

Select shaft arrangement from

"Standard Shaft Arrangement Configuration"

in the Dimension Tables.

Determine nomenclature.

Cf Overhang factor

Fr Actual radial load

Fx Actual thrust load

Equivalent radial load FrE FrE SF Cf

FrE Fx SFEquivalent thrust load

FrA Allowable radial load

FxA Allowable thrust load

Right angle shaft: Page C-42 C-49


Standard Specifications Page B-2

Ch

eck O

ve

rha

ng

Lo

ad

Check

Therm

al P

ow

er

Dete

rmin

e N

om

encl

atu

reD

ete

rmin

e S

ize

Conditions Selected item

C-8 Service Factor

C-4 C-5 Nomenclature

Motor power :

:

55 kW

High speed shaft speed 1500r/min

Shaft and mounting positions : Right Angle Shaft Horizontal Mounting

Load Condition

Type of load, Operating hours : Uniform load 14 hours/day

Determine service factor SF = 1.25

Calculate equivalent transmission power PE = 55 1.25 = 68.75 kW

Slow speed shaft speed 85 r/min

Reduction ratio

Select nominal reduction ratio

1500/85 =17.6

17.6 18

Determine size Size 9035, Nominal Reduction Ratio 18

Mechanical power rating P = 72 kW

PE P OK

Ambient Temperature 40

Temperature correction factor without fan Ta Ta = 0.70

Thermal rating without fan PT P T = 48kW

P T Ta = 33.6 < 55 = PM OUT

Temperature correction factor with fan Ta Ta = 0.73

Thermal rating with fan PT P T = 120kW

P T Ta = 87.6 > 55 = PM OK

With fan

Check overhang load

Overhang member : Sprocket (Single row)

Overhang factor Cf Cf = 1.0

Radial load position and direction : Center of solid shaft, Downward

Radial load Fr : 8.5 kN

Thrust load Fx 0 kN

Equivalent radial load FrE Fr E = 8.5 1.25 1.0 = 10.6

Equivalent axial load FrX Fr X = 0 1.25 = 0

Allowable radial load 29.4 kN

Allowable thrust load 23.1 kN

Ambient Condition : Indoor, Ambient temperature 40

Check ambient condition OK

Model selected PHA9035R2-RLF-18

C-18 Selection Tables

C-42 Allowable External Load



C-2 Standard Specifications

29.4

10.6

23.1

0+ = 0.36 < 1 OK




Check dimension

Check shaft arrangement RL

Check nomenclature PHA9035R2-RLF-18

C-50 *1 Dimension Tables

Standard Specifications

Standard shaft arrangement

configuration in Dimension

TablesNomenclature in Dimension

Tables

*1 Page number of therelevant DimensionTable is indicated in the Selection Table.

C - 7

Reducer Selection Example

Service Factor SF

Reducer Service Factor SF

Notes:(1) Values in the above table are based on AGMA standards and SUMITOMO's

experience.(2) Values in the above table apply for electric motors as prime movers - if prime

mover is a multi cylinder combustion engine, 0.25 has to be added to the SF.(3) Consult us for special duty or when special safety specifications are needed.(4) ※ : For SF, consult us.

METAL STRIP PROCESSING MACHINERY


CRANESClassification of

Crane Hoisting Traverse Motion

Travel Motion

SlewingMotion

BoomHoisting

The crane classification is based on JIS B8821-1976"Calculation standard for the structure of crane."

Group 1.00 1.50 1.25 1.00Group 1.25 1.50 1.00Group 1.50 1.75 1.25Group 1.75 2.00 1.50

CONVEYORS (General purpose)Uniformly load or fedHeavy loadNot uniformly fedReciprocating or shaker

1.00

1.001.50

1.00

1.251.75

1.25

1.502.00

ELEVATORSElevatorsEscalators

1.501.25

1.501.25

1.501.25

METAL MILLSDraw bench carriage and main driveRunout table

Non reversingGroup drivesIndividual drivers

ReversingSlab pushersShearsWire drawingWire winding machine

1.50

1.502.002.001.502.001.251.25

1.50

1.502.002.001.502.001.251.50

1.50

1.502.002.001.502.001.251.50

BridlesCoilers & uncoilersEdge trimmersFlattenersLoopers (Accumulators)Pinch rollsScrap choppersShearsSlitters

1.501.001.001.251.501.252.002.001.00

1.501.251.251.251.501.252.002.001.25

1.501.501.501.502.001.502.002.001.50

MILL, ROTARY TYPEBall and rodCement KilnsKilns (Except cement klins)Dryers and coolers

2.002.001.501.50

2.002.001.501.50

2.002.001.501.50

SEWAGE DISPOSAL EQUIPMENTAeratorsBar screensChemical feedersDewatering screensScum breakersSlow or rapid mixersSludge collectorsThickenersVacuum filters

2.001.251.251.501.501.501.251.501.50

2.001.251.251.501.501.501.251.501.50

2.001.251.251.501.501.501.251.501.50

EXTRUDERSPlasticsRubber

1.251.50

1.251.50

1.251.50

FEEDERSApronBeltDiskReciprocatingScrew

1.001.001.001.501.00

1.251.251.001.751.25

1.501.501.252.001.50


RUBBER INDUSTRYMixersMixing mill -2 smooth rollsBatch drop mill -2 smooth rollsCracker warmer

-2 roll: 1 corrugated rollCracker -2 corrugated rollsHolding, feed and blend mill

-2 rollsRefiner -2 rollsCalenders

1.751.501.50

1.752.00

1.251.501.50

1.751.501.50

1.752.00

1.251.501.50

2.001.751.50

1.752.00

1.251.501.50

PAPER MILLAll types incl. Paper making machine 2.00 2.00 2.00

AGITATORS AND MIXERSPure liquidsLiquids and solidsLiquids variable density

1.001.001.00

1.001.251.25

1.251.501.50

MIXERSConcrete 1.25 1.25 1.50

CRUSHERStone or ore 2.50 2.50 2.50

BLOWERSCentrifugalLobeVane

1.001.001.00

1.001.251.25

1.251.501.50

COMPRESSORSCentrifugalLobeReciprocating: multi cylinderReciprocating: single cylinder

1.001.001.501.75

1.001.251.501.75

1.251.501.752.00

FANSCentrifugalCooling towersForced draftSuction draftIndustrial and mine

1.00※

1.251.501.50

1.00※

1.251.501.50

1.25※

1.251.501.50

PUMPSCentrifugalScrew pumpGear pump

1.001.251.25

1.001.251.25

1.251.501.50

DREDGESCable reelsConveyorsCutter head drivePumpsScreen drivesStackersWinches

1.251.252.002.001.751.251.25

1.251.252.002.001.751.251.25

1.501.502.002.002.001.501.50

GENERATORS AND EXCITERS 1.00 1.00 1.25HAMMER MILLS 1.75 1.75 2.00SUGAR INDUSTRY

Beet slicerCane knivesCrushersMills (Slow speed end)

2.001.501.501.75

2.001.501.501.75

2.001.501.501.75

C - 8

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

Reducer Service Factor SF

Refer to the following for driven machines not shown on the left page.

Prime Mover Operating Hours

Type of Load

Uniform Load Moderate Shock Load

Heavy Shock Load

U M H

Electric Motor3 hours/day10 hours/day24 hours/day

1.001.001.25

1.001.251.50

1.501.752.00

Internal Combustion Engine

(multi cylinder)

3 hours/day10 hours/day24 hours/day

1.001.251.50

1.251.501.75

1.752.002.25

Note: Consult us when the operating hours are less than 3 hours/day or when an internal combustion engine (single cylinder) is used.

C - 9

C - 10

Selection Tables C- 12 Allowable Loads C- 42Dimension Sheets C- 50

<Reducer: Right Angle Shaft-Horizontal Mounting>

<Reducer: Right Angle Shaft Vertical Mounting>

<Reducer: Right Angle Shaft Upright Mounting>

C

Reducer: Right Angle

NominalReduction

Ratio

H.SpeedShaft Speed

r/min

L.SpeedShaft Speed

r/min

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090

6.3

Exact Reduction Ratio 6.265 6.049 6.539 6.405 6.384 6.188 6.188 6.286180015001200

286238190

746249

988165

152127102

236197158

334279224

568475381

798667535

1020※

857688

1000900750

159143119

413731

544941

857664

132119

99

187168141

318287240

447403337

575518433

7.1


254211169

625242

988165

152127102

228191153

334279224

559469377

798667535

1020※

857688

1000900750

141127106

3531

26.5

544941

857664

128116

97

187168141

316285238

447403337

575518433

8

Exact Reduction Ratio 7.889 8.056 8.118 8.150 7.778 8.144 8.125 7.875 7.759 8.082 8.190180015001200

225188150

574738

766351

14011794

152127102

217181145

236197158

340285229

544467374

568475381

810705568

1150※

1010834

1000900750

12511394

3128.623.8

423831

787159

857664

120108

90

132119

99

191173144

312280234

318287240

476429359

699630528

DimensionTables

Horizontal C-50 C-50 C-50 C-50 C-50 C-50 C-50 C-52 C-52 C-52 C-52Vertical C-76 C-76 C-76 C-76 C-76 C-76 C-76 C-78 C-78 C-78 C-78Upright C-92 C-92 C-92 C-92 C-92 C-92 C-92 C-94 C-94 C-94 C-94

NominalReduction

Ratio

H.SpeedShaft Speed

r/min

Number of Cooling

Fans

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090

Double ReductionHorizontal

Type

6.3▼

8

1800 -1

3075

39105

46124

61171

73217

88261

79233

108332

134414

138372

160561

1500 -1

3168

4095

49117

64160

77203

92243

86224

118326

146402

154369

183574

1200 -1

3160

4084

50106

66145

79184

95223

90208

126307

154376

165351

200557

1000 -1

3052

3973

5094

65128

78163

95198

91186

128276

156337

169319

207511

900 -1

2948

3969

5089

65121

78154

94187

91178

128265

156323

169306

209493

750 -1

2842

3760

4879

63107

76137

92167

89159

127239

154290

169278

209449

Double Reduction

Vertical Type

6.3▼

8

1800 -1

3075

39105

46124

61171

73217

88261

79233

108332

134414

138372

160561

1500 -1

3168

4095

49117

64160

77203

92243

86224

118326

146402

154369

183574

1200 -1

3160

4084

50106

66145

79184

95223

90208

126307

154376

165351

200557

1000 -1

3052

3973

5094

65128

78163

95198

91186

128276

156337

169319

207511

900 -1

2948

3969

5089

65121

78154

94187

91178

128265

156323

169306

209493

750 -1

2842

3760

4879

63107

76137

92167

89159

127239

154290

169278

409449

Double Reduction

Upright Type

6.3▼

8

1800 -1

2460

3184

3799

49137

58174

70209

64186

86266

107331

110297

128449

1500 -1

2554

3276

3993

51128

61162

74195

69179

95260

117321

123295

146459

1200 -1

2448

3267

4085

52116

63147

76178

72166

100245

123301

132281

160446

1000 -1

2441

3158

4075

52102

63130

76158

73149

102221

125270

135255

166408

900 -1

2339

3155

4071

5297

62124

75150

72142

102212

125258

136245

167395

750 -1

2334

3048

3963

5086

61110

74133

71128

101191

123232

135222

167360

MECHANICAL POWER RATING (kW)

THERMAL POWER RATING (kW)

SELECTION Right Angle Shaft Double Reduction Nominal Reduction Ratio 6.3 8

C - 12

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

Size of Reducer L.SpeedShaft Speed

r/min

H.SpeedShaft Speed

r/min

NominalReduction

Ratio9095 9100 9105 9110 9115 9118 9121 9126 9128 9131 9136Exact Reduction Ratio

6.3

286238190

180015001200

159143119

1000900750

Exact Reduction Ratio

7.1

254211169

180015001200

141127106

1000900750


8

225188150

180015001200

12511394

1000900750

Horizontal DimensionTablesVertical

Upright

Size of Reducer Number of Cooling

Fans

H.SpeedShaft Speed

r/min

NominalReduction

Ratio9095 9100 9105 9110 9115 9118 9121 9126 9128 9131 9136-1 1800


Type

6.3▼

8

-1 1500-1 1200-1 1000-1 900-1 750

-1 1800

Double Reduction

Vertical Type

6.3▼

8

-1 1500-1 1200-1 1000-1 900-1 750

-1 1800

Double Reduction

Upright Type

6.3▼

8

-1 1500-1 1200-1 1000-1 900-1 750


C - 13

PN = P750 X 750N

1.000.850.700.55

1.000.870.730.60

20304050

1.For marked values, the forced oil lubrication is required at continuous operation.

2.Consult us when the high speed shaft speed is over 1800r/min.

3.When the high speed shaft speed is not shown in the table, find it by the interpolation method.

4.When the high speed shaft speed (N) is lower than 750r/min, find the mechanical power rating (PN) according to the following formula.

5.Shown in the table are the ratings for the slow speed shaft.

6.Refer to C42-C49 for the allowable radial and axial load on each shaft.

1.Shown in the table are the ratings for models without a fan cooling unit and those with a fan.(-: none fan, 1: with a fan)

2.The values are applicable to continuous operation at ambient temperatures of 20 °C or less. When the temperature is out of the range, refer to the temperature correction factor shown above.

3.When the high speed shaft speed is not shown in the table, find it by interpolation method.

Temperature Correction Factor

Without Fan With Fan

AmbientTemperature



SELECTION Right Angle Shaft Double Reduction Nominal Reduction Ratio 9 11.2

NominalReduction

Ratio

H.SpeedShaft Speed

r/min

L.SpeedShaft Speed

r/min

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090

9

Exact Reduction Ratio 9.125 9.192 8.750 8.861 8.875 9.265 9.250 8.938 9.176 8.874 9.056 8.597 9.034180015001200

200167133

494133

766351

12610585

152127102

188158127

236197158

280234188

334279224

443371298

568475381

704590474

798667535

1070※

897722

1000900750

111100

83

28.025.321.1

423831

716453

857664

1069580

132119

99

158142119

187168141

250225188

318287240

397358300

447403337

605546457

10

Exact Reduction Ratio 10.040 9.899 10.303 10.118 10.171 9.889 10.000 10.125 9.995 9.875 10.125 10.007 9.882 9.982180015001200

180150120

4336

29.1

726048

1119274

14311995

161134107

217181145

278232187

351297237

434362289

546469375

677567456

810713577

1000※

863695

1150※

1010867

1000900750

1009075

24.321.918.2

403630

625546

797159

898067

120108

90

156141118

198178148

241217181

313281234

382344288

482435363

582525439

736663553

11.2


161134107

3933

26.5

635242

1008367

13311189

145121

97

198166133

229191154

293245197

351294236

462387311

565473381

747626504

892※748602

1120※

938756

1000900750

898067

22.119.916.7

3531

26.6

565042

756756

817361

111100

84

129116

97

165149124

198178149

260235196

319287240

421380318

504454380

633571478

DimensionTables

Horizontal C-50 C-50 C-50 C-50 C-50 C-50 C-50 C-50 C-52 C-52 C-52 C-52 C-52 C-52Vertical C-76 C-76 C-76 C-76 C-76 C-76 C-76 C-76 C-78 C-78 C-78 C-78 C-78 C-78Upright C-92 C-92 C-92 C-92 C-92 C-92 C-92 C-92 C-94 C-94 C-94 C-94 C-94 C-94

NominalReduction

Ratio

H.SpeedShaft Speed

r/min

Number of Cooling

Fans

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090


Type

9▼

11.2

1800 -1

2767

3696

44118

56156

69205

82244

78227

99290

109337

130402

142382

173467

164577

203715

1500 -1

2759

3686

46109

58144

71187

85225

82214

105274

116319

141388

153368

188452

183575

226708

1200 -1

2652

3676

4698

59129

71166

86202

84195

108250

120292

147359

160341

198422

195543

242673

1000 -1

2644

3566

4685

58113

70145

85177

84173

108222

120260

148320

161305

200379

199491

248610

900 -1

2541

3462

4581

57107

69137

84167

84164

108211

119247

148306

161291

200363

200471

249586

750 -1

2436

3354

4471

5695

66120

82149

82146

105188

117221

146275

158261

198326

198425

247531

Double Reduction

Vertical Type

9▼

11.2

1800 -1

2767

3696

44118

56156

69205

82244

78227

99290

109337

130402

142382

173467

164577

203715

1500 -1

2759

3686

46109

58144

71187

85225

82214

105274

116319

141388

153368

188452

183575

226708

1200 -1

2652

3676

4698

59129

71166

86202

84195

108250

120292

147359

160341

198422

195543

242673

1000 -1

2644

3566

4685

58113

70145

85177

84173

108222

120260

148320

161305

200379

199491

248610

900 -1

2541

3462

4581

57107

69137

84167

84164

108211

119247

148306

161291

200363

200471

249586

750 -1

2436

3354

4471

5695

66120

82149

82146

105188

117221

146275

158261

198326

198425

247531

Double Reduction

Upright Type

9▼

11.2

1800 -1

2253

2976

3595

45125

55164

66195

62182

79232

87270

104321

113306

138373

131461

163572

1500 -1

2247

2969

3787

46115

57150

68180

66171

84219

93255

113310

123295

151362

147460

181567

1200 -1

2141

2961

3778

47104

57133

69161

68156

86200

96234

118287

128273

158338

156434

194538

1000 -1

2035

2852

3668

4691

56116

68141

67138

87178

96208

118256

129244

160303

159392

198488

900 -1

2033

2849

3664

4686

55109

67134

67131

86169

96198

118245

129233

160290

160377

199469

750 -1

1929

2643

3557

4576

5396

66119

65117

84151

94176

117220

127209

158261

158340

198425

C - 14

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles



r/min

H.SpeedShaft Speed

r/min

NominalReduction

Ratio9095 9100 9105 9110 9115 9118 9121 9126 9128 9131 91369.000 9.000 8.947 Exact Reduction Ratio

9

1550※

1350※

1120※

1880※

1660※

1420※

2800※

2460※

2110※

200167133

180015001200

964※

882※

756※

1250※

1160※

998※

1850※

1720※

1500※

111100

83

1000900750

9.765 9.765 10.235 Exact Reduction Ratio

10

1460※

1280※

1060※

1880※

1660※

1420※

2800※

2460※

2060※

180150120

180015001200

911※

834※

716※

1250※

1160※

998※

1770※

1620※

1390※

1009075

1000900750


11.2

1230※

1050※

877※

1570※

1380※

1180※

2430※

2140※

1780※

161134107

180015001200

752※

688※

590※

1040※

971※

833※

1520※

1390※

1200※

898067

1000900750

C-54 C-54 C-54 Horizontal DimensionTablesVertical

Upright


Fans

H.SpeedShaft Speed

r/min

NominalReduction

Ratio9095 9100 9105 9110 9115 9118 9121 9126 9128 9131 9136

490-1 1800


Type

9▼

11.2

200538 560 570

-1 1500

220525

270599 590

-1 1200

210444

280551

320600

-1 1000

210425

270508

330593

-1 900

190350

250429

320523

-1 750

-1 1800

Double Reduction

Vertical Type

9▼

11.2

-1 1500-1 1200-1 1000-1 900-1 750

-1 1800

Double Reduction

Upright Type

9▼

11.2

-1 1500-1 1200-1 1000-1 900-1 750

C - 15

PN = P750 X 750N

1.000.850.700.55

1.000.870.730.60

20304050












AmbientTemperature



NominalReduction

Ratio

H.SpeedShaft Speed

r/min

L.SpeedShaft Speed

r/min

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090

12.5


144120

96

3630

24.2

584839

897459

1119374

122102

82

161134107

225188150

284237189

322269216

435362290

512428343

700598482

732※

612491

1000※

863715

1000900750

807260

20.118.115.1

3229.324.4

494437

625546

686151

898067

125112

94

158142118

180162136

242217181

286258215

403364304

410369308

600540450

14


129107

86

3227.321.9

514334

826955

1058871

1169778

152126101

188158127

239200161

283237190

366306246

450377303

600502404

688※

576463

933※

782629

1000900750

716454

18.316.513.8

28.725.821.5

464134

595344

655849

847663

1069580

134121101

159143120

206186155

253228191

338305255

388350292

527475398

16


1139475

27.122.618.1

4235

28.5

675645

897459

968064

122102

82

169141113

226188150

261218175

322269216

373311250

512428343

545※

455365

732※

612491

1000900750

635647

15.113.511.3

23.721.417.8

3733

28.2

494437

544840

686151

948470

12511394

146131109

180162136

208188157

286258215

305275229

410369308

DimensionTables


NominalReduction

Ratio

H.SpeedShaft Speed

r/min

Number of Cooling

Fans

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090


Type

12.5▼

16

1800 -1

2357

3388

41110

54150

63187

79235

73214

96282

101312

130402

137369

175472

172607

208731

1500 -1

2350

3377

4198

55137

63166

79209

74192

98256

103283

133366

140336

180433

178558

224702

1200 -1

2242

3166

4085

55121

61144

78183

73169

98227

103250

134327

140298

181387

180500

230641

1000 -1

2136

3056

3973

54105

59123

76158

71146

96198

101218

132286

138260

179339

178438

229565

900 -1

2033

2952

3868

5399

58115

74147

70137

95186

99205

130269

136245

177321

176414

227535

750 -1

1928

2845

3659

5186

55100

71129

67120

92164

95180

126237

131216

172284

171367

221475

Double Reduction

Vertical Type

12.5▼

16

1800 -1

2357

3388

41110

54150

63187

79235

73214

96282

101312

130402

137369

175472

172607

208731

1500 -1

2350

3377

4198

55137

63166

79209

74192

98256

103283

133366

140336

180433

178558

224702

1200 -1

2242

3166

4085

55121

61144

78183

73169

98227

103250

134327

140298

181387

180500

230641

1000 -1

2136

3056

3973

54105

59123

76158

71146

96198

101218

132286

138260

179339

178438

229565

900 -1

2033

2952

3868

5399

58115

74147

70137

95186

99205

130269

136245

177321

176414

227535

750 -1

1928

2845

3659

5186

55100

71129

67120

92164

95180

126237

131216

172284

171367

221475

Double Reduction

Upright Type

12.5▼

16

1800 -1

1846

2670

3388

43120

50150

63188

58171

77225

81250

104321

109295

140378

138485

166585

1500 -1

1840

2662

3379

44109

50133

63167

59154

79205

82227

106293

112269

144346

142446

179562

1200 -1

1734

2553

3268

4497

49115

62146

58135

79182

82200

107262

112239

145310

144400

184513

1000 -1

1729

2445

3158

4384

4799

61126

57117

77158

80174

106228

110208

144271

142350

183452

900 -1

1627

2342

3055

4279

4692

59118

56110

76149

79164

104215

108196

142257

141331

182428

750 -1

1523

2236

2947

4069

4480

57103

5496

73131

76144

101190

105173

138227

137293

177380


C - 16

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles


r/min

H.SpeedShaft Speed

r/min

NominalReduction


12.5

1180※1010※

840※

1570※

1380※

1180※

2310※

1980※

1640※

144120

96

180015001200

721※

660※

566※

1040※

971※

830※

1410※

1290※

1110※

807260

1000900750


14

993※

852※

706※

1280※

1130※

966※

1980※

1700※

1410※

129107

86

180015001200

605※

554※

475※

850※

790※

678※

1210※

1110※

952※

716454

1000900750


16

953※

817※

678※

1280※

1130※

966※

1840※

1580※

1310※

1139475

180015001200

581※

532※

456※

850※

790※

662※

1120※

1020※

883※

635647

1000900750


Upright


Fans

H.SpeedShaft Speed

r/min

NominalReduction

Ratio9095 9100 9105 9110 9115 9118 9121 9126 9128 9131 9136

490-1 1800


Type

12.5

16

200538 560 570

-1 1500

220525

270599 590

-1 1200

210444

280551

320600

-1 1000

210425

270508

330593

-1 900

190350

250429

320523

-1 750

-1 1800 Double

ReductionVertical

Type

12.5▼

16

-1 1500-1 1200-1 1000-1 900-1 750

-1 1800

Double Reduction

Upright Type

12.5▼

16

-1 1500-1 1200-1 1000-1 900-1 750


C - 17

PN = P750 X 750N

1.000.850.700.55

1.000.870.730.60

20304050












AmbientTemperature




NominalReduction

Ratio

H.SpeedShaft Speed

r/min

L.SpeedShaft Speed

r/min

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090

18


1008367

25.321.117.0

3731

25.1

645343

867257

957963

1179878

145122

98

197165132

230193155

295247198

368308247

478400321

545※

455365

719※

602484

1000900750

565042

14.212.810.7

20.918.915.7

3632

27.1

484336

534739

655849

817361

111100

83

129116

97

166149125

207186156

269242203

305275229

405366306

20

Exact Reduction Ratio 20.235 19.778 19.790 19.301 19.500 19.500180015001200

907560

***

675645

***

968064

***

170141113

***

261218175

***

373311250

* ※

**

545※

455365

1000900750

504538

***

3733

28.2

***

544840

***

948570

***

146131109

***

208188157

***

305275229

22.4


806754

***

655443

***

957963

***

152127102

***

240201161

***

373311250

* ※

**

545※

455365

1000900750

454033

***

3632

27.4

***

534739

***

857764

***

135121101

***

208188157

***

305275229

DimensionTables


NominalReduction

Ratio

H.SpeedShaft Speed

r/min

Number of Cooling

Fans

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090


Type

18▼

22.4

1800 -1

2255

3285

40108

49136

56165

69205

73213

89259

103317

119368

139375

165445

175617

209736

1500 -1

2248

3174

4096

48120

55146

69182

74192

89231

104287

120330

142341

167401

181567

213668

1200 -1

2141

3064

3983

47103

54127

67157

73169

87201

104254

119290

142303

165353

183507

213593

1000 -1

2035

2954

3871

4588

53110

64133

71146

84173

102220

116251

140264

162306

181445

210517

900 -1

1932

2850

3767

4482

52103

63125

70137

83162

100207

114236

138249

159288

178421

207487

750 -1

1827

2743

3558

4271

5090

60109

67120

79141

97182

109205

133219

154253

173372

200430

Double Reduction

Vertical Type

18▼

22.4

1800 -1

2255

3285

40108

49136

53157

69205

73213

89259

103317

119368

139375

165445

175617

209736

1500 -1

2248

3174

4096

48120

53141

69182

74192

89231

104287

120330

142341

167401

181567

213668

1200 -1

2141

3064

3983

47103

53124

67157

73169

87201

104254

119290

142303

165353

183507

213593

1000 -1

2035

2954

3871

4588

52107

64133

71146

84173

102220

116251

140264

162306

181445

210517

900 -1

1932

2850

3767

4482

51101

63125

70137

83162

100207

114236

138249

159288

178421

207487

750 -1

1827

2743

3558

4271

4988

60109

67120

79141

97182

109205

133219

154253

173372

200430

Double Reduction

Upright Type

18▼

22.4

1800 -1

1844

2568

3287

39109

44132

55164

58171

71207

82254

95294

111300

132356

140494

167589

1500 -1

1738

2560

3277

3996

44117

55146

59154

71185

84230

96264

114273

133321

145453

171535

1200 -1

1733

2451

3267

3782

43102

54126

58135

70161

83203

95232

114242

132282

146406

170474

1000 -1

1628

2343

3057

3670

4288

51106

57116

68138

82176

93201

112211

130245

144356

168413

900 -1

1526

2340

3053

3566

4182

50100

56109

66130

80166

91189

110199

127230

143336

165390

750 -1

1522

2135

2846

3357

4072

4887

5496

63113

77146

87164

107176

123202

139298

160344

C - 18

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles



r/min

H.SpeedShaft Speed

r/min

NominalReduction


18

803※

689※

571※

1040※

918※

785※

1590※

1370※

1130※

1008367

180015001200

490※

448※

384※

691※

642※

551※

975※

892※

765※

565042

1000900750


20

771※

662※

548※

1040※

918※

785※

1480※

1270※

1050※

907560

180015001200

470※

431※

369※

691※

634※

530※

905※

829※

711※

504538

1000900750


22.4

***

***

***

806754

180015001200

***

***

***

454033

1000900750


Upright


Fans

H.SpeedShaft Speed

r/min

NominalReduction

Ratio9095 9100 9105 9110 9115 9118 9121 9126 9128 9131 9136

490-1 1800 Double

ReductionHorizontal

Type

18▼

22.4

200538 560 570

-1 1500

220525

270599 590

-1 1200

210444

280551

320600

-1 1000

210425

270508

330593

-1 900

190350

250429

320523

-1 750

-1 1800

Double Reduction

Vertical Type

18▼

22.4

-1 1500-1 1200-1 1000-1 900-1 750

-1 1800

Double Reduction

Upright Type

18▼

22.4

-1 1500-1 1200-1 1000-1 900-1 750

*Marked models are triple reduction units. Refer to C-20 and C-21.

C - 19

PN = P750 X 750N

1.000.850.700.55

1.000.870.730.60

20304050












AmbientTemperature



SELECTION Right Angle Shaft Triple Reduction Nominal Reduction Ratio 20 25

NominalReduction

Ratio

H.SpeedShaft Speed

r/min

L.SpeedShaft Speed

r/min

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090

20

Exact Reduction Ratio 20.091 19.620 19.790 19.181 19.950 20.206 20.548180015001200

907560

615141

***

816754

***

124103

83

***

194162130

***

295246198

***

516431346

***

735616495

1000900750

504538

3431

26.1

***

454034

***

696252

***

1089781

***

165149124

***

289261218

***

413373311

22.4


806754

554637

***

816754

***

124103

83

***

194162130

***

295246198

***

476398320

***

696582468

1000900750

454033

3128.123.5

***

454034

***

696252

***

1089781

***

165149124

***

268241202

***

391353295

25

Exact Reduction Ratio 25.137 25.041 24.444 25.935 24.662 25.137 24.938 24.630 24.626 25.685180015001200

726048

494133

645443

806753

1179878

124103

83

193162130

295246198

453379304

516431346

625528424

1000900750

403630

27.825.020.9

3632

27.3

454033

655949

696252

1089781

165149124

254229192

289261218

355320267

DimensionTables

Horizontal C-56 C-56 C-56 C-56 C-56 C-58 C-58 C-58 C-58 C-60Vertical C-80 C-80 C-80 C-80 C-80 C-82 C-82 C-82 C-82 C-84Upright C-96 C-96 C-96 C-96 C-96 C-98 C-98 C-98 C-98

NominalReduction

Ratio

H.SpeedShaft Speed

r/min

Number of Cooling

Fans

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090

Triple ReductionHorizontal

Type

20▼

25

1800 -1

3465

4386

5393

61141

77178

84177

113214

138368

172459

213510

1500 -1

3458

4377

5383

61126

77159

85160

115195

144340

178421

220468

1200 -1

3351

4367

5272

60111

76139

85141

115173

146307

180377

222419

1000 -1

3344

4258

5062

5996

74120

83122

114151

145271

178332

220369

900 -1

3242

4154

4958

5890

73113

82115

112143

144257

176314

218350

750 -1

3136

3947

4750

5679

7099

79102

109126

141229

172279

213311

Triple Reduction

Vertical Type

20▼

25

1800 -1

3161

4181

5189

57133

73169

79166

105200

126336

159422

181433

1500 -1

3255

4274

5180

59121

74153

81152

109185

135319

168397

195416

1200 -1

3249

4165

5170

59107

74135

82136

111167

140293

172362

205386

1000 -1

3243

4156

4960

5893

72117

81119

111147

141262

173321

207346

900 -1

3140

4053

4857

5788

71110

80113

110139

140250

172306

207331

750 -1

3036

3847

4650

5578

6997

78100

107124

138224

169273

205298

Triple Reduction

Upright Type

20▼

25

1800 -1

3465

4386

5596

61141

77178

84177

113214

138368

172459

1500 -1

3458

4377

5585

61126

77159

85160

115195

144340

178421

1200 -1

3351

4367

5474

60111

76139

85141

115173

146307

180377

1000 -1

3344

4258

5264

5996

74120

83122

114151

145271

178332

900 -1

3242

4154

5160

5890

73113

82115

112143

144257

176314

750 -1

3136

3947

4952

5679

7099

79102

109126

141229

172279

C - 20

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles



r/min

H.SpeedShaft Speed

r/min

NominalReduction

Ratio9095 9100 9105 9110 9115 9118 9121 9126 9128 9131 913620.504 19.608 Exact Reduction Ratio

20

***

992※

829666

***

1520※

12701020

***

907560

180015001200

***

556501419

***

856772645

***

504538

1000900750

22.800 22.004 22.444 22.499 22.222 Exact Reduction Ratio

22.4

735616495

992※

829666

992※

829666

1360※

1160936

1520※

12701020

806754

180015001200

413373311

556501419

556501419

783706591

856772645

454033

1000900750

24.737 25.271 24.351 24.166 25.421 24.837 Exact Reduction Ratio

25

714613495

912※

763613

992※

829666

1270※

1090910

1360※

1170970

1520※

12701020

726048

180015001200

413373311

513462386

556501419

771696582

827746624

856772645

403630

1000900750

C-60 C-60 C-60 C-60 C-60 C-62 Horizontal DimensionTablesC-84 C-84 C-84 C-84 C-84 Vertical

Upright


Fans

H.SpeedShaft Speed

r/min

NominalReduction

Ratio9095 9100 9105 9110 9115 9118 9121 9126 9128 9131 9136239572

273767

306860

348933

3851031

426703

-1 1800


Type

20▼

25

246524

282705

317792

366874

402958

443730

-1 1500

249469

286634

321711

375794

410869

450743

-1 1200

247413

284558

319627

375703

410769

449741

-1 1000

244391

281530

316595

373669

408732

446736

-1 900

239348

275472

309530

366599

400654

437722

-1 750

203485

230646

258724

280750

316847

-1 1800

Triple Reduction

Vertical Type

20▼

25

219466

249624

280700

315751

350834

-1 1500

229433

262582

294653

340719

373791

-1 1200

232388

266524

299588

349655

382717

-1 1000

232371

266502

299563

351630

384689

-1 900

229334

264453

296508

350571

382625

-1 750

-1 1800

Triple Reduction

Upright Type

20▼

25

-1 1500-1 1200-1 1000-1 900-1 750

*marked models are double reduction units. Refer to C-18 and C-19.

C - 21

PN = P750 X 750N

1.000.850.700.55

1.000.870.730.60

20304050












AmbientTemperature



NominalReduction

Ratio

H.SpeedShaft Speed

r/min

L.SpeedShaft Speed

r/min

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090

28


655443

4437

29.9

584939

655544

816754

968064

12410383

152127102

194162130

251210168

295246198

392328263

498417335

559468376

1000900750

363227

25.022.518.8

3329.724.8

363328

454034

544840

696252

857764

1089781

141127106

165149124

220198166

280252211

314283237

31.5


574838

3226.921.5

514334

574838

816754

927964

12410383

140117

94

194162130

225190152

295246198

331280224

473399321

508425341

1000900750

322924

18.016.213.5

29.126.221.9

3229

24.1

454034

534840

696252

787059

1089781

127114

95

165149124

187169141

268242202

285257215

35.5


514234

3226.921.5

473931

514234

695746

786552

1008467

127106

85

159133106

202169135

266223179

301251202

410343276

450376302

1000900750

282521

18.016.213.5

26.423.819.9

2925.721.5

3834

29.2

443933

565042

716453

898067

113102

85

149134112

169152127

230208173

253228190

DimensionTables

Horizontal C-56 C-56 C-56 C-56 C-56 C-56 C-58 C-58 C-58 C-58 C-58 C-58 C-60Vertical C-80 C-80 C-80 C-80 C-80 C-80 C-82 C-82 C-82 C-82 C-82 C-82 C-84Upright C-96 C-96 C-96 C-96 C-96 C-96 C-98 C-98 C-98 C-98 C-98 C-98

NominalReduction

Ratio

H.SpeedShaft Speed

r/min

Number of Cooling

Fans

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090


Type

28▼

35.5

1800 -1

3159

4079

4985

59103

58135

74171

81172

99209

109208

136259

137364

168447

210502

1500 -1

3052

4071

4875

5890

58120

73152

81153

100188

110186

138233

139328

172408

212452

1200 -1

2944

3961

4664

5779

57104

72132

80133

98163

108162

136205

138289

173364

211398

1000 -1

2838

3853

4454

5567

5589

70114

78115

96142

106140

134178

135251

172319

207346

900 -1

2735

3750

4351

5463

5383

69106

76108

94133

104132

132168

133236

170302

204327

750 -1

2630

3643

4144

5154

5172

6693

7394

91117

100116

128148

128208

165268

198288

Triple Reduction

Vertical Type

28▼

35.5

1800 -1

3057

3875

4782

5698

56129

70163

77162

94198

103196

128244

128341

156415

180430

1500 -1

2950

3868

4772

5687

56115

71146

78147

96180

105178

132222

132313

163386

194412

1200 -1

2843

3860

4562

5576

55101

70128

78129

95158

105157

132198

133279

167351

198373

1000 -1

2737

3752

4454

5466

5487

69111

76112

94139

103137

131174

131244

167310

197330

900 -1

2734

3749

4350

5362

5281

67105

75105

92130

102129

129164

130231

165295

196313

750 -1

2530

3543

4143

5154

5071

6592

7292

89115

98114

126146

126204

162263

191279

Triple Reduction

Upright Type

28▼

35.5

1800 -1

3159

4079

5190

59103

58135

74171

81172

99209

109208

136259

137364

168447

1500 -1

3052

4071

5078

5890

58120

73152

81153

100188

110186

138233

139328

172408

1200 -1

2944

3961

4967

5779

57104

72132

80133

98163

108162

136205

138289

173364

1000 -1

2838

3853

4757

5567

5589

70114

78115

96142

106140

134178

135251

172319

900 -1

2735

3750

4553

5463

5383

69106

76108

94133

104132

132168

133236

170302

750 -1

2630

3643

4346

5154

5172

6693

7394

91117

100116

128148

128208

165268

SELECTION Right Angle Shaft Triple Reduction Nominal Reduction Ratio 28 35.5

C - 22

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles


r/min

H.SpeedShaft Speed

r/min

NominalReduction

Ratio9095 9100 9105 9110 9115 9118 9121 9126 9128 9131 913628.500 27.119 27.662 27.730 27.389 28.500 28.500 27.737 27.737 Exact Reduction Ratio

28

625536444

812※

679546

970※

825663

1130※

949763

1280※

1090910

1930※

1610※

1300

2060※

1770※

1460

3110※

2600※

2090※

3260※

2800※

2320※

655443

180015001200

379341285

456411344

554500418

638575481

781715612

1080982821

12501140955

175015801320

199018201560

363227

1000900750

30.922 32.716 30.012 31.413 31.331 31.500 30.922 30.922 31.729 31.729 Exact Reduction Ratio

31.5

589498400

708※

592476

877※

734590

988※

823658

1140※

978806

1380※

1150923

1780※

1490※

1200

1920※

1640※

1360

2730※

2280※

1840※

2910※

2500※

2070※

574838

180015001200

335302252

398359300

493445372

548494411

674608508

769692576

1000906758

11601050882

153013801160

177016201360

322924

1000900750

35.576 35.108 35.811 36.045 35.601 36.176 36.000 36.000 36.500 35.036 35.036 Exact Reduction Ratio

35.5

522448364

630※

527424

766※

640514

878※

734590

988※

823658

1330※

1110895

1530※

1280※

1030

1690※

1450※

1200

2110※

1760※

1420※

2480※

2070※

1670※

2680※

2300※

1910※

514234

180015001200

304274229

354319267

430388324

493445372

548494411

748675564

866780652

1000908759

11801070

895

139012601050

163014801240

282521

1000900750

C-60 C-60 C-60 C-60 C-60 C-62 C-62 C-62 C-64 C-64 C-64 Horizontal DimensionTablesC-84 C-84 C-84 C-84 C-84 Vertical

Upright


Fans

H.SpeedShaft Speed

r/min

NominalReduction

Ratio9095 9100 9105 9110 9115 9118 9121 9126 9128 9131 9136229547

272764

298839

340912

3761007

417688

500824

500824

455751

537886

537886

-1 1800


Type

28▼

35.5

230490

275688

303758

348830

389929

428706

529872

529872

488805

586966

586966

-1 1500

228430

274607

300666

348736

390825

431712

546901

546901

509841

6191021

6191021

-1 1200

223373

269529

294579

343643

383719

428706

543895

543895

516851

6301040

6301040

-1 1000

220352

265499

290546

338607

378679

424700

538888

538888

516851

6291038

6291038

-1 900

213310

257441

281481

329538

367600

415684

526868

526868

511843

6221026

6221026

-1 750

200477

232651

255717

280750

315844

-1 1800

Triple Reduction

Vertical Type

28▼

35.5

212450

251627

274685

310738

343819

-1 1500

215405

256569

282627

324686

363768

-1 1200

213357

256503

281552

325609

365684

-1 1000

211338

254478

278524

323580

362651

-1 900

206300

248426

272466

317519

355581

-1 750

-1 1800

Triple Reduction

Upright Type

28▼

35.5

-1 1500-1 1200-1 1000-1 900-1 750

SELECTION Right Angle Shaft Triple Reduction Nominal Reduction Ratio 28 35.5

C - 23

PN = P750 X 750N

1.000.850.700.55

1.000.870.730.60

20304050












AmbientTemperature




NominalReduction

Ratio

H.SpeedShaft Speed

r/min

L.SpeedShaft Speed

r/min

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090

40


453830

3025.820.7

3226.921.5

504133

574838

736149

927965

124103

83

140117

94

194162130

225190152

286239192

331280224

408341274

1000900750

252319

17.315.613.0

18.016.213.5

28.025.321.1

3228.924.1

403630

565142

696252

787059

1099882

127114

95

160144121

187169141

229206172

45


403327

27.823.218.6

3226.921.5

413428

534435

605040

826855

978165

133111

89

162135108

214179144

248207166

315263211

362302243

1000900750

222017

15.614.011.7

18.016.213.5

23.020.717.3

3027.022.6

3320

25.3

464134

544941

746756

918268

120108

90

139125104

176159133

203183152

50

Exact Reduction Ratio 51.141 50.611 50.205 51.869 52.207 50.273 49.557 49.500 48.176 48.889 47.953 50.984180015001200

363024

19.316.112.9

3226.921.5

514234

594939

786552

978165

130110

88

153128102

199170137

231193155

295252202

322269216

1000900750

201815

10.89.78.1

18.016.213.5

28.625.721.4

3339.924.9

433932

544941

736655

867764

115103

86

129116

97

169152127

180162136

DimensionTables


NominalReduction

Ratio

H.SpeedShaft Speed

r/min

Number of Cooling

Fans

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090


Type

40▼

50

1800 -1

2651

3773

4476

5494

53123

67155

74155

91192

102194

126240

129342

159422

196468

1500 -1

2644

3663

4266

5383

52108

66136

73136

90169

101171

125212

128304

159376

195415

1200 -1

2437

3454

4055

5170

5092

64117

70117

87145

98147

122184

126264

156328

191360

1000 -1

2331

3346

3846

4960

4878

61100

68100

85126

95126

119158

122227

152283

186310

900 -1

2229

3242

3743

4857

4773

6093

6693

83117

93118

117148

120213

149266

182291

750 -1

2124

3036

3437

4548

4563

5781

6381

79102

89103

112130

115186

144233

175255

Triple Reduction

Vertical Type

40▼

50

1800 -1

2649

3671

4374

5393

51119

64149

71149

87184

98186

121229

123326

151401

179427

1500 -1

2543

3562

4164

5281

51105

64132

70132

87163

98165

121205

124293

153362

182387

1200 -1

2436

3453

3954

5069

4990

62114

69115

85142

96144

119179

122257

152319

182343

1000 -1

2330

3245

3746

4859

4877

6098

6798

83123

93124

117155

120223

149277

179299

900 -1

2228

3142

3642

4755

4672

5992

6592

81115

91116

115146

117209

147261

176282

750 -1

2024

3036

3436

4548

4462

5680

6280

78100

87101

110128

113184

142230

170248

Triple Reduction

Upright Type

40▼

50

1800 -1

2651

3773

4783

5495

53123

67155

74155

91192

102194

126240

129342

159422

1500 -1

2644

3663

4772

5383

52108

66136

73136

90169

101171

125212

128304

159376

1200 -1

2437

3454

4562

5171

5092

64117

70117

87145

98147

122184

126264

156328

1000 -1

2331

3346

4353

4960

4878

61100

68100

85126

95126

119158

122227

152283

900 -1

2229

3242

4249

4856

4773

6093

6693

83117

93118

117148

120213

149266

750 -1

2124

3036

4042

4548

4563

5781

6381

79102

89103

112130

115186

144233

C - 24

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles



r/min

H.SpeedShaft Speed

r/min

NominalReduction

Ratio9095 9100 9105 9110 9115 9118 9121 9126 9128 9131 913638.599 40.322 38.853 38.716 40.726 38.824 39.059 39.059 39.601 40.079 40.079 Exact Reduction Ratio

40

479401322

577※

483388

682※

570458

861※

723581

917※

775623

1240※

1030835

1420※

1180※

955

1570※

1350※

1110

1940※

1630※

1310※

2170※

1820※

1460※

2390※

2050※

1700※

453830

180015001200

269242202

324292244

383345288

486438366

521469392

698630526

799720602

930839701

1090988826

12201100

923

144013001080

252319

1000900750


45

430364292

514※

429345

624※

522419

715※

598480

861※

739610

1050※

882709

1220※

1020※

822

1390※

1190※

957

1670※

1400※

1120※

1970※

1650※

1330※

2200※

1890※

1560※

403327

180015001200

244220184

288260217

350315264

402362302

508457381

593534446

687620518

800721603

943850710

11101000

838

13101180

988

222017

1000900750

48.249 50.875 47.886 48.680 50194 49.040 49.398 49.398 50.084 50.569 50.569 Exact Reduction Ratio

50

385322258

459※

384308

555※

464373

691※

578464

755※

632507

988※

827664

1120※

945※

759

1290※

1090※

883

1540※

1290※

1040※

1730※

1450※

1160※

1970※

1690※

1370※

363024

180015001200

216194162

257232194

312281234

388349292

424382319

555500416

634572478

738666556

870785656

974878734

11401030

866

201815

1000900750


Upright


Fans

H.SpeedShaft Speed

r/min

NominalReduction

Ratio9095 9100 9105 9110 9115 9118 9121 9126 9128 9131 9136219524

258724

285801

330885

362969

399658

524864

524864

450743

552911

552911

-1 1800


Type

40▼

50

220468

257642

287717

335798

365870

401662

529872

529872

481793

586966

586966

-1 1500

217410

252558

283629

330700

362767

397655

525866

525866

490809

593978

593978

-1 1200

213356

245482

277545

323606

356667

389642

516852

516852

490808

590973

590973

-1 1000

209335

240453

273514

317570

351630

383633

509840

509840

487803

585965

585965

-1 900

202295

232397

264453

306501

340556

372613

495817

495817

478788

573945

573945

-1 750

197471

233656

256720

291779

322862

-1 1800

Triple Reduction

Vertical Type

40▼

50

203432

239599

265661

305727

335799

-1 1500

205387

239531

268594

312661

341721

-1 1200

203340

236463

265522

310581

340637

-1 1000

201322

232438

263495

306550

337605

-1 900

196286

225386

256439

298487

330539

-1 750

-1 1800

Triple Reduction

Upright Type

40▼

50

-1 1500-1 1200-1 1000-1 900-1 750

C - 25

PN = P750 X 750N

1.000.850.700.55

1.000.870.730.60

20304050












AmbientTemperature




NominalReduction

Ratio

H.SpeedShaft Speed

r/min

L.SpeedShaft Speed

r/min

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090

56


322721

19.316.112.9

29.424.619.7

3126.120.9

4336

28.9

484032

625242

776451

1028568

128107

85

172144115

200167134

259216174

285238191

1000900750

181613

10.89.78.1

16.514.812.4

17.515.713.1

24.121.718.1

27.324.620.5

3531

26.5

433832

575143

716454

968772

112101

84

145131109

160144120

63


292419

19.316.112.9

3126.120.9

473931

635242

756350

978165

1119274

156132106

172143115

238202162

254212170

1000900750

161412

10.89.78.1

17.515.713.1

26.624.020.0

3531

26.6

423831

544941

625546

888066

968672

135122102

142128107

71


252117

17.714.811.9

19.316.112.9

2621.917.5

3126.120.9

3932

26.3

504234

605040

806753

1018467

135113

91

158132105

209175140

225188151

1000900750

141311

9.98.97.4

10.89.78.1

14.613.211.0

17.515.713.1

21.919.716.5

28.525.621.4

3430

25.6

454033

565042

766857

887966

117105

88

126113

95

DimensionTables


NominalReduction

Ratio

H.SpeedShaft Speed

r/min

Number of Cooling

Fans

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090


Type

56▼

71

1800 -1

2548

3162

4171

4884

49114

64148

68143

86181

93177

121230

118314

153408

182436

1500 -1

2441

3053

3961

4672

4898

62129

66124

84158

91154

119202

116276

152359

180382

1200 -1

2335

2844

3751

4461

4683

60109

63106

81135

88132

115173

113237

148310

174328

1000 -1

2229

2737

3543

4150

4370

5793

6189

78115

84112

111148

109202

143266

168281

900 -1

2127

2634

3440

4047

4265

5686

5983

76107

82104

109138

106189

140249

164262

750 -1

1923

2429

3234

3739

4056

5374

5672

7293

7890

103120

101164

134217

156228

Triple Reduction

Vertical Type

56▼

71

1800 -1

2447

3060

4069

4782

47110

62143

65138

83175

90171

117222

113301

147391

169405

1500 -1

2440

2952

3860

4570

4696

61125

64121

82154

89150

116196

113267

147348

170361

1200 -1

2234

2843

3750

4359

4582

59107

62103

80133

86129

113170

110232

144303

167315

1000 -1

2129

2636

3543

4150

4369

5691

6088

77114

83110

109146

107199

140261

162272

900 -1

2127

2534

3439

3946

4265

5585

5882

75106

81103

107136

104186

138245

159255

750 -1

1923

2429

3234

3739

3955

5274

5571

7293

7789

102119

100162

132215

153223

Triple Reduction

Upright Type

56▼

71

1800 -1

2548

3162

4374

4884

49114

64148

68143

86181

93177

121230

118314

153408

1500 -1

2441

3053

4164

4672

4898

62129

66124

84158

91154

119202

116276

152359

1200 -1

2335

2844

3954

4461

4683

60109

63106

81135

88132

115173

113237

148310

1000 -1

2229

2737

3745

4150

4370

5793

6189

78115

84112

111148

109202

143266

900 -1

2127

2634

3642

4047

4265

5686

5983

76107

82104

109138

106189

140249

750 -1

1923

2429

3336

3739

4056

5374

5672

7293

7890

103120

101164

134217

C - 26

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles


* marked models are quadruple reduction units. Refer to C-30 and C-31.


r/min

H.SpeedShaft Speed

r/min

NominalReduction


56

344287231

409※

342274

497※

415333

571※

478383

706※

588470

839※

702563

989※

827※

664

1150※

962※

773

1330※

1110※

899※

1580※

1320※

1060※

1820※

1560※

1250※

322721

180015001200

193173145

229206172

278251209

320289241

392353294

471424354

555500418

646582487

751677566

889802670

1040946790

181613

1000900750

61.378 63.843 60419 61.300 63.112 61.661 61.378 61.378 63.115 63.459 63.459 Exact Reduction Ratio

63

304254204

367※

307246

442※

369296

548※

456365

603※

504405

763※

638512

913※

763※

613

1060※

888※

713

1230※

1030※

829※

1380※

1160※

932※

1620※

1360※

1100※

292419

180015001200

170153128

206185155

248223186

304274228

338305255

427384320

512462386

596537449

693625522

779702587

919828692

161412

1000900750

72.000 68.512 69.882 70.339 69.474 72.872 70.500 70.500 73.000 Exact Reduction Ratio

71

271226182

327※

273219

397※

332266

456※

381305

548※

456365

660※

550440

797※

666※

535

927※

775※

622

1070※

895※

719※

***

***

252117

180015001200

152137114

183165138

222200167

255230192

304274228

367330275

447403336

520469391

601541452

***

***

141311

1000900750


Upright


Fans

H.SpeedShaft Speed

r/min

NominalReduction

Ratio9095 9100 9105 9110 9115 9118 9121 9126 9128 9131 9136197472

243683

267750

306821

344921

387639

489806

489806

454748

554914

554914

-1 1800


Type

56▼

71

194412

240600

263657

303723

339810

385634

483797

483797

457754

562928

562928

-1 1500

187353

233517

255565

296626

330698

376621

470776

470776

452746

561925

561925

-1 1200

180302

225443

246483

287537

319599

366604

456752

456752

443731

553912

553912

-1 1000

176282

220415

240452

281504

313561

359593

447737

447737

437720

546900

546900

-1 900

168245

211361

230394

269440

300490

346571

430709

430709

423697

530875

530875

-1 750

184441

225633

249699

283757

319855

-1 1800

Triple Reduction

Vertical Type

56▼

71

184391

226566

249623

285680

321765

-1 1500

180340

223495

245543

283598

317670

-1 1200

175293

218429

238469

277519

309580

-1 1000

172275

214403

234440

272489

304546

-1 900

164240

206353

225386

263430

293479

-1 750

-1 1800

Triple Reduction

Upright Type

56▼

71

-1 1500-1 1200-1 1000-1 900-1 750

C - 27

PN = P750 X 750N

1.000.850.700.55

1.000.870.730.60

20304050












AmbientTemperature




NominalReduction

Ratio

H.SpeedShaft Speed

r/min

L.SpeedShaft Speed

r/min

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090

80


231915

19.316.112.9

***

3126.120.9

***

514234

***

756350

***

1119274

***

172143115

206172138

1000900750

13119.4

10.89.78.1

***

17.515.713.1

***

28.525.721.4

***

423831

***

625546

***

968672

115104

87

90


201713

18.815.712.6

***

27.523.018.4

***

4134

27.4

***

635342

***

1078971

***

165138110

***

1000900750

11108.3

10.59.47.9

***

15.413.811.6

***

22.920.617.2

***

3532

26.7

***

595445

***

928369

***

DimensionTables

Horizontal C-56 C-56 C-56 C-58 C-58 C-58 C-60Vertical C-80 C-80 C-80 C-82 C-82 C-82 C-84Upright C-96 C-96 C-96 C-98 C-98 C-98

NominalReduction

Ratio

H.SpeedShaft Speed

r/min

Number of Cooling

Fans

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090


Type

80▼

90

1800 -1

3059

4681

59136

79167

110210

140372

185443

1500 -1

2951

4469

57117

77145

108182

137325

183388

1200 -1

2742

4258

5499

73122

103155

132278

177334

1000 -1

2535

3948

5183

70103

99131

127237

171285

900 -1

2433

3845

5077

6896

96122

124221

167267

750 -1

2328

3638

4766

6482

91105

118191

159232

Triple Reduction

Vertical Type

80▼

90

1800 -1

2958

4579

57132

76160

107203

135359

173412

1500 -1

2850

4367

56115

75141

105178

134316

173367

1200 -1

2742

4157

5397

72120

101152

130272

170320

1000 -1

2535

3948

5182

69102

97129

125233

165276

900 -1

2432

3845

4976

6795

95121

122218

162259

750 -1

2327

3537

4666

6381

90104

117189

156227

Triple Reduction

Upright Type

80▼

90

1800 -1

3059

4681

59136

79167

110210

140372

1500 -1

2951

4469

57117

77145

108182

137325

1200 -1

2742

4258

5499

73122

103155

132278

1000 -1

2535

3948

5183

70103

99131

127237

900 -1

2433

3845

5077

6896

96122

124221

750 -1

2328

3638

4766

6482

91105

118191

C - 28

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles




r/min

H.SpeedShaft Speed

r/min

NominalReduction


80

240200160

290※

242194

353※

295237

386※

323259

481※

402323

587※

490393

735※

615※

493

856※

716※

574

988※

826※

663※

***

***

231915

180015001200

134121101

162146122

198178149

216195163

269243203

328296247

412372310

480432361

554499417

***

***

13119.4

1000900750

85.313 85.712 93.924 91.765 Exact Reduction Ratio

90

220183147

***

313※

262210

***

408※

341273

512※

427341

***

***

***

***

***

201713

180015001200

12311192

***

175158132

***

228206172

284256213

***

***

***

***

***

11108.3

1000900750

C-60 C-60 C-60 C-60 C-60 C-62 C-62 C-62 C-64 Horizontal DimensionTablesC-84 C-84 C-84 C-84 C-84 Vertical

Upright


Fans

H.SpeedShaft Speed

r/min

NominalReduction

Ratio9095 9100 9105 9110 9115 9118 9121 9126 9128 9131 9136197471

245689

263738

304814

330885

363599

487803

487803

447737

-1 1800


Type

80▼

90

194412

242605

259647

300717

326778

357590

481793

481793

450742

-1 1500

187353

235521

251556

293619

317671

346571

468772

468772

445734

-1 1200

180301

227447

242476

284532

307575

335553

454749

454749

436719

-1 1000

176282

222418

237445

278499

300539

328540

445734

445734

429708

-1 900

168244

213364

226388

267436

288470

314517

427705

427705

416686

-1 750

184440

228640

245689

281753

308825

-1 1800

Triple Reduction

Vertical Type

80▼

90

184391

229572

245613

283675

309737

-1 1500

180340

225500

241535

280593

304644

-1 1200

175292

220433

235462

274515

297558

-1 1000

171274

216407

230433

270484

292524

-1 900

164239

208357

221380

261426

282460

-1 750

-1 1800

Triple Reduction

Upright Type

80▼

90

-1 1500-1 1200-1 1000-1 900-1 750

C - 29

PN = P750 X 750N

1.000.850.700.55

1.000.870.730.60

20304050












AmbientTemperature



SELECTION Right Angle Shaft Quadruple Reduction Nominal Reduction Ratio 71 90

NominalReduction

Ratio

H.SpeedShaft Speed

r/min

Number of Cooling

Fans

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090

Quadruple ReductionHorizontal

Type71▼

90

1800 - 40 50 70 94 119 1571500 - 40 49 69 93 118 1571200 - 39 47 66 90 115 1551000 - 38 45 63 87 112 151

900 - 37 44 62 85 109 149750 - 36 42 59 82 105 143

Quadruple Reduction

Vertical Type71▼

90

1800 - 44 54 75 103 130 1751500 - 43 52 73 99 127 1711200 - 41 49 69 95 121 1651000 - 40 47 66 91 116 159

900 - 39 45 64 88 113 155750 - 37 43 60 84 108 148

Quadruple Reduction

Upright Type71▼

90

1800 - 43 50 70 94 1181500 - 43 49 68 93 1171200 - 42 47 66 90 1151000 - 41 45 63 87 111

900 - 40 44 62 85 109750 - 38 41 59 81 105

NominalReduction

Ratio

H.SpeedShaft Speed

r/min

L.SpeedShaft Speed

r/min

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090

71

Exact Reduction Ratio180015001200

252117

***

***

***

***

***

***

***

***

***

***

***

***

***

1000900750

141311

***

***

***

***

***

***

***

***

***

***

***

***

***

80

Exact Reduction Ratio 77.989 79.341 78.120 79.124180015001200

231915

***

262117

***

3025.320.3

***

***

806653

***

127106

84

***

***

1000900750

13119.4

***

141311

***

16.915.212.7

***

***

444033

***

706353

***

***

90


201713

***

21.017.514.0

***

3025.320.3

***

453730

***

806653

***

124104

83

***

176147118

1000900750

11108.3

***

11.710.5

8.8

***

16.915.212.7

***

25.022.518.8

***

444033

***

696252

***

988974

DimensionTables

Horizontal C-66 C-66 C-68 C-68 C-68 C-70Vertical C-86 C-86 C-88 C-88 C-88 C-90Upright C-100 C-100 C-102 C-102 C-102

C - 30

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles



Fans

H.SpeedShaft Speed

r/min

NominalReduction

Ratio9095 9100 9105 9110 9115 9118 9121 9126 9128 9131 9136202 259 359 359 386 472 472 - 1800 Quadruple

ReductionHorizontal

Type71▼

90

204 259 361 361 395 484 484 - 1500202 255 356 356 397 488 488 - 1200199 250 349 349 394 484 484 - 1000196 246 344 344 390 480 480 - 900190 237 334 334 381 469 469 - 750

228 288 - 1800 Quadruple Reduction

Vertical Type71▼

90

224 281 - 1500216 271 - 1200209 262 - 1000205 256 - 900197 245 - 750

- 1800 Quadruple Reduction

Upright Type71▼

90

- 1500- 1200- 1000- 900- 750

* marked models are triple reduction units. Refer to C-26～ C-29.


r/min

H.SpeedShaft Speed

r/min

NominalReduction


71

***

***

***

***

***

***

***

***

***

1280※

1070860

1510※

12601010

252117

180015001200

***

***

***

***

***

***

***

***

***

718648541

848764638

141311

1000900750

78.568 78.568 Exact Reduction Ratio

80

***

***

***

***

***

***

***

***

***

1120※

941755

1320※

1110891

231915

180015001200

***

***

***

***

***

***

***

***

***

631569475

745671560

13119.4

1000900750

88.676 89.695 91.800 91.800 91.022 87.371 87371 Exact Reduction Ratio

90

***

254212170

***

379316254

***

***

615514412

715598480

862※

720578

1010※

848680

1190※

1000803

201713

180015001200

***

142128106

***

212191159

***

***

344310259

401361301

483435363

568512428

670604505

11108.3

1000900750

C-70 C-70 C-72 C-72 C-74 C-74 C-74 Horizontal DimensionTablesC-90 C-90 Vertical

Upright

C - 31

PN = P750 X 750N

1.000.850.700.55

1.000.870.730.60

20304050












AmbientTemperature




NominalReduction

Ratio

H.SpeedShaft Speed

r/min

Number of Cooling

Fans

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090


Type100▼

125

1800 - 39 45 46 57 64 78 87 107 110 135 1471500 - 38 44 45 55 63 76 86 105 109 133 1471200 - 36 42 43 53 60 72 83 102 106 129 1441000 - 35 40 41 50 58 69 80 98 103 125 140

900 - 34 39 40 49 56 68 78 96 100 122 138750 - 32 37 38 46 54 64 74 91 96 117 133

Quadruple Reduction

Vertical Type100▼

125

1800 - 41 48 49 60 69 82 94 115 120 146 1621500 - 40 46 47 58 66 79 91 111 116 142 1581200 - 38 44 45 55 63 75 86 106 111 135 1521000 - 36 42 43 52 60 71 83 101 107 130 147

900 - 35 40 41 50 58 69 80 98 104 126 143750 - 33 38 39 47 55 65 76 93 99 120 137

Quadruple Reduction

Upright Type100▼

125

1800 - 41 45 46 56 64 78 87 107 110 1351500 - 40 44 45 55 63 76 85 105 109 1331200 - 38 42 43 53 60 72 83 101 106 1291000 - 37 40 41 50 58 69 80 98 103 125

900 - 36 39 40 49 56 68 78 95 100 122750 - 34 37 38 46 54 64 74 91 96 117

NominalReduction

Ratio

H.SpeedShaft Speed

r/min

L.SpeedShaft Speed

r/min

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090

100


181512

20.116.813.5

26.021.717.4

29.824.919.9

3025.320.3

453730

786552

806653

1189979

127106

84

160133107

1000900750

109.07.5

11.210.18.4

14.513.010.8

16.615.012.5

16.915.212.7

25.022.518.8

433933

444033

665949

706353

898067

112


161311

16.513.811.0

22.018.414.7

24.520.416.4

3025.320.3

3831

25.5

453730

655443

806653

1028568

127106

84

141118

951000

900750

8.98.06.7

9.28.36.9

12.311.1

9.2

13.712.310.3

16.915.212.7

21.319.216.0

25.022.518.8

3633

27.5

444033

575143

706353

797159

125


14129.6

16.313.610.6

20.417.013.6

23.919.916.0

3025.320.3

3832

26.0

453730

605040

806653

907560

124104

83

128107

861000

900750

8.07.26.0

9.18.26.8

11.410.2

8.5

13.312.010.0

16.915.212.7

21.719.616.3

25.022.518.8

3330

25.2

444033

504538

696252

716453

DimensionTables

Horizontal C-66 C-66 C-66 C-66 C-68 C-68 C-68 C-68 C-68 C-68 C-70Vertical C-86 C-86 C-86 C-86 C-88 C-88 C-88 C-88 C-88 C-88 C-90Upright C-100 C-100 C-100 C-100 C-102 C-102 C-102 C-102 C-102 C-102

C - 32

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles



Fans

H.SpeedShaft Speed

r/min

NominalReduction

Ratio9095 9100 9105 9110 9115 9118 9121 9126 9128 9131 9136164 189 211 252 275 302 355 355 374 470 470 - 1800 Quadruple

ReductionHorizontal

Type100▼

125

163 190 212 250 273 300 355 355 380 470 470 - 1500160 188 209 245 268 293 350 350 380 464 464 - 1200156 184 205 239 261 285 342 342 375 454 454 - 1000153 181 202 235 256 280 337 337 371 447 447 - 900148 176 195 227 247 270 326 326 362 433 433 - 750

180 211 236 275 300 - 1800 Quadruple Reduction

Vertical Type100▼

125

176 207 230 268 293 - 1500169 200 223 258 282 - 1200163 193 215 249 272 - 1000159 189 210 243 265 - 900152 181 202 233 254 - 750


Upright Type100▼

125

- 1500- 1200- 1000- 900- 750


r/min

H.SpeedShaft Speed

r/min

NominalReduction


100

188157126

232194155

274229184

348290233

401335269

500418335

567474380

660552443

796※

665534

889※

742596

1040※

876703

181512

180015001200

1059479

12911797

153138115

194175146

224202169

280252210

318286239

370333278

446402335

498448374

587529442

109.07.5

1000900750


112

170142114

206172138

251209168

287240192

368308247

433362290

492411329

572478383

702※

586470

806※

673540

951※

794637

161311

180015001200

958671

11510486

140126105

161145121

206186155

242218181

275248207

320288241

393354295

451※

406339

532※

480400

8.98.06.7

1000900750


125

151126101

191159127

223186149

286239191

304253203

397332266

454349304

528441354

648※

541434

706※

590473

833※

696558

14129.6

180015001200

847663

1069680

12411294

160144120

170153127

222200167

254229191

295266222

362327273

395356297

466420350

8.07.06.0

1000900750


Upright

C - 33

PN = P750 X 750N

1.000.850.700.55

1.000.870.730.60

20304050












AmbientTemperature




NominalReduction

Ratio

H.SpeedShaft Speed

r/min

Number of Cooling

Fans

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090


Type140▼

180

1800 - 38 42 40 55 59 75 81 102 101 130 1441500 - 37 41 38 53 56 73 78 100 98 127 1401200 - 35 39 36 51 53 70 73 97 93 123 1351000 - 34 38 34 48 50 67 70 93 89 119 129

900 - 33 37 32 47 48 65 67 91 86 117 126750 - 31 35 30 45 45 62 63 86 81 111 120

Quadruple Reduction

Vertical Type140▼

180

1800 - 40 45 42 58 61 79 84 109 107 139 1521500 - 39 43 39 55 58 76 81 105 102 135 1471200 - 37 41 37 52 54 72 75 100 96 129 1391000 - 35 39 34 50 51 68 71 96 91 123 133

900 - 34 38 33 48 49 66 69 93 88 120 129750 - 32 36 30 45 46 63 64 88 82 114 122

Quadruple Reduction

Upright Type140▼

180

1800 - 39 42 40 54 59 75 81 102 101 1291500 - 38 41 38 53 56 73 78 100 98 1271200 - 37 39 36 51 53 70 73 96 93 1231000 - 35 38 33 48 50 67 70 93 89 119

900 - 34 37 32 47 48 65 67 91 86 116750 - 33 35 30 44 45 62 63 86 81 111

NominalReduction

Ratio

H.SpeedShaft Speed

r/min

L.SpeedShaft Speed

r/min

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090

140


13118.6

13.411.28.9

17.314.511.6

19.616.413.1

25.621.417.1

3025.620.5

3933

26.6

504133

695846

786552

1078971

1139576

1000900750

7.16.45.4

7.56.75.6

9.78.77.3

10.99.98.2

14.312.910.7

17.115.412.9

22.220.016.7

28.025.221.0

3835

29.2

433932

595445

635747

160


119.47.5

16.513.811.0

17.114.311.4

25.521.317.1

25.721.417.1

4034

27.2

3933

26.6

635342

685746

957964

1028568

1000900750

6.35.64.7

9.28.36.9

9.58.67.1

14.212.810.7

14.312.810.7

22.720.417.0

22.119.916.6

3531

26.6

3834

28.7

534840

575143

180


108.36.7

14.011.7

9.4

16.113.410.8

20.517.113.7

25.120.916.8

3226.721.4

3933

26.6

534435

625242

826854

907560

1000900750

5.65.04.2

7.87.15.9

9.08.16.7

11.410.3

8.6

14.012.610.5

17.816.113.4

22.119.916.6

29.726.722.3

3531

26.4

454134

504538

DimensionTables

Horizontal C-66 C-66 C-66 C-66 C-68 C-68 C-68 C-68 C-68 C-68 C-70Vertical C-86 C-86 C-86 C-86 C-88 C-88 C-88 C-88 C-88 C-88 C-90Upright C-100 C-100 C-100 C-100 C-102 C-102 C-102 C-102 C-102 C-102

C - 34

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles



Fans

H.SpeedShaft Speed

r/min

NominalReduction

Ratio9095 9100 9105 9110 9115 9118 9121 9126 9128 9131 9136155 188 205 242 265 291 339 339 372 457 457 - 1800 Quadruple

ReductionHorizontal

Type140▼

180

151 184 201 237 258 288 334 334 369 456 456 - 1500145 178 194 228 248 281 325 325 361 444 444 - 1200139 171 186 219 238 273 316 316 352 431 431 - 1000135 167 182 213 232 268 309 309 346 422 422 - 900129 160 174 204 221 258 298 298 334 406 406 - 750


Vertical Type140▼

180

158 194 211 247 269 - 1500150 184 200 235 255 - 1200143 176 192 224 244 - 1000138 172 186 218 237 - 900131 163 177 207 225 - 750


Upright Type140▼

180

- 1500- 1200- 1000- 900- 750


r/min

H.SpeedShaft Speed

r/min

NominalReduction


140

13711491

170141113

206172138

236197158

303253203

337281226

399333267

464388311

544※

454364

656※

548439

774※

646518

13118.6

180015001200

766957

958571

11510486

13211999

169152127

188170142

223201168

260234195

304274229

367330276

433390325

7.16.45.4

1000900750


160

12110181

150125100

183153123

222186149

250208167

327273219

368307246

429358287

502※

419336

574※

480385

678※

566454

119.47.5

180015001200

676150

847563

1029277

12411293

139126105

183165137

206185155

240216180

281253211

321289241

379341285

6.35.64.7

1000900750


180

1099173

13311189

162135108

189157126

236197158

277231185

320267214

373311249

443※

370296

523※

437350

617※

515413

108.36.7

180015001200

615545

746756

908168

1059579

13111899

155139116

179161134

208187156

247223186

292263220

345311259

5.65.04.2

1000900750


Upright

C - 35

PN = P750 X 750N

1.000.850.700.55

1.000.870.730.60

20304050












AmbientTemperature




NominalReduction

Ratio

H.SpeedShaft Speed

r/min

Number of Cooling

Fans

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090


Type200▼

250

1800 - 37 45 54 65 74 91 94 114 1281500 - 35 43 52 62 71 87 91 110 1241200 - 33 40 48 58 67 82 86 104 1181000 - 31 38 46 55 64 78 82 99 112

900 - 30 36 44 53 62 75 79 96 109750 - 28 34 41 49 58 71 75 90 103

Quadruple Reduction

Vertical Type

200▼

250

1800 - 38 47 56 67 77 94 98 119 1341500 - 36 44 53 63 74 90 94 114 1291200 - 34 41 50 59 69 84 88 107 1211000 - 31 38 47 55 65 79 84 101 115

900 - 30 37 45 53 63 76 81 98 111750 - 28 34 42 50 59 72 76 92 105

Quadruple Reduction

Upright Type200▼

250

1800 - 37 45 54 65 74 91 94 1141500 - 35 43 52 62 71 87 91 1101200 - 33 40 48 58 67 82 86 1041000 - 31 38 46 55 64 78 82 99

900 - 30 36 44 53 62 75 79 96750 - 28 34 41 49 58 71 75 90

NominalReduction

Ratio

H.SpeedShaft Speed

r/min

L.SpeedShaft Speed

r/min

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090

200


9.07.56.0

15.012.510.0

17.114.311.4

24.320.316.3

25.721.417.1

3933

26.6

594939

685746

806753

1000900750

5.04.53.8

8.47.56.3

9.58.67.1

13.612.210.2

14.312.810.7

22.119.916.6

3330

25.0

3834

28.7

454033

224

Exact Reduction Ratio 236.74 222.15 239.37 224.81 214.27 212.55 212.75 211.77 225.88180015001200

8.06.75.4

12.310.3

8.2

16.814.011.3

19.216.012.8

25.721.417.1

3328.122.5

3933

26.6

514334

655444

715947

1000900750

4.54.03.3

6.96.25.2

9.48.57.1

10.79.68.0

14.312.910.7

18.816.914.1

22.119.916.6

28.825.921.6

3633

27.6

393530

250


7.26.04.8

12.010.0

8.0

16.013.410.7

19.616.313.1

25.521.217.0

3025.820.6

3933

26.6

453830

625242

645343

1000900750

4.03.63.0

6.76.05.0

8.98.06.7

10.99.88.2

14.112.710.6

17.215.512.9

22.219.916.6

25.522.919.1

3531

26.4

3632

27.1

DimensionTables

Horizontal C-66 C-66 C-68 C-68 C-68 C-68 C-68 C-68 C-70Vertical C-86 C-86 C-88 C-88 C-88 C-88 C-88 C-88 C-90Upright C-100 C-100 C-102 C-102 C-102 C-102 C-102 C-102

C - 36

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles



Fans

H.SpeedShaft Speed

r/min

NominalReduction

Ratio9095 9100 9105 9110 9115 9118 9121 9126 9128 9131 9136142 167 186 217 237 273 325 325 352 426 426 - 1800 Quadruple

ReductionHorizontal

Type200▼

250

137 162 180 210 229 265 317 317 344 417 417 - 1500131 155 173 200 218 254 306 306 331 402 402 - 1200125 149 165 191 208 244 294 294 318 388 388 - 1000121 145 161 186 203 238 287 287 310 379 379 - 900114 137 152 176 192 226 275 275 296 362 362 - 750


Vertical Type200▼

250

143 169 188 217 237 - 1500134 160 178 205 224 - 1200128 153 169 195 213 - 1000123 148 164 189 206 - 900116 140 155 179 195 - 750


Upright Type200▼

250

- 1500- 1200- 1000- 900- 750


r/min

H.SpeedShaft Speed

r/min

NominalReduction


200

968064

1179778

14412096

172143115

200167133

259216173

295246198

344287230

408※

341273

458※

382307

540※

451362

9.07.56.0

180015001200

534840

655849

807260

968672

11110084

145130109

165148124

192173144

228205171

256230192

302272227

5.04.53.8

1000900750


224

867157

1048669

12610584

14512197

172143115

215180144

252211169

294245196

345※

288231

417※

348279

491※

410329

8.06.75.4

180015001200

484336

585243

706353

817360

968672

12010890

141127106

164148123

193174145

233209175

274247206

4.54.03.3

1000900750


250

766350

968064

1129475

14412096

153127102

209174140

233194156

271226181

319※

266213

365※

304244

430※

359288

7.26.04.8

180015001200

423831

534840

625647

807260

857764

11710587

13011797

151136113

178160134

203183153

240216180

4.03.63.0

1000900750


Upright

C - 37

PN = P750 X 750N

1.000.850.700.55

1.000.870.730.60

20304050












AmbientTemperature




NominalReduction

Ratio

H.SpeedShaft Speed

r/min

Number of Cooling

Fans

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090


Type280▼

355

1800 - 37 43 54 62 75 87 94 109 1271500 - 35 41 52 59 72 83 91 105 1231200 - 33 39 49 56 68 78 86 100 1171000 - 31 36 46 52 64 74 82 94 112

900 - 30 35 44 50 62 72 80 91 109750 - 28 32 42 47 58 67 75 86 103

Quadruple Reduction

Vertical Type280▼

355

1800 - 38 45 56 64 78 90 99 114 1331500 - 36 42 54 61 74 85 95 109 1281200 - 34 39 50 57 70 80 89 102 1211000 - 31 37 47 53 66 75 84 96 114

900 - 30 35 45 51 63 73 81 93 111750 - 28 33 42 48 59 68 76 87 104

Quadruple Reduction

Upright Type280▼

355

1800 - 37 43 54 62 75 87 94 1091500 - 35 41 52 59 72 83 91 1051200 - 33 39 49 56 68 78 86 991000 - 31 36 46 52 64 74 82 94

900 - 30 35 44 50 62 71 80 91750 - 28 32 42 47 58 67 75 86

NominalReduction

Ratio

H.SpeedShaft Speed

r/min

L.SpeedShaft Speed

r/min

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090

280


6.45.44.3

9.98.26.6

12.910.7

8.6

15.412.910.3

20.016.713.4

25.721.517.2

3529.823.9

3932

26.4

544536

574738

1000900750

3.63.22.7

5.54.94.1

7.26.55.4

8.67.76.4

11.110.0

8.4

14.412.910.8

19.917.915.0

22.019.816.5

3027.122.6

3128.824.0

315


5.74.83.8

9.27.76.2

12.810.7

8.6

13.811.5

9.2

20.417.013.6

22.518.715.0

3227.221.8

3428.923.1

484032

524335

1000900750

3.22.92.4

5.24.63.9

7.16.45.4

7.76.95.8

11.410.2

8.5

12.511.3

9.4

18.216.413.6

19.317.414.5

26.824.220.2

29.326.322.0

355


5.14.23.4

8.06.65.3

10.38.66.9

12.510.4

8.3

16.113.410.7

21.117.614.1

27.322.818.3

3125.920.7

4134

27.6

453830

1000900750

2.82.52.1

4.44.03.3

5.75.24.3

6.96.25.2

9.08.16.7

11.710.6

8.8

15.213.711.4

17.315.613.0

23.020.717.3

25.523.019.2

DimensionTables


C - 38

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles



Fans

H.SpeedShaft Speed

r/min

NominalReduction

Ratio9095 9100 9105 9110 9115 9118 9121 9126 9128 9131 9136137 167 180 208 228 248 304 304 340 421 421 - 1800 Quadruple

ReductionHorizontal

Type280▼

355

132 162 175 202 220 240 295 295 332 412 412 - 1500126 155 167 192 210 228 282 282 319 397 397 - 1200120 149 160 184 200 218 270 270 306 383 383 - 1000116 145 155 179 195 212 263 263 299 374 374 - 900110 138 147 169 184 200 250 250 285 358 358 - 750


Vertical Type280▼

355

137 169 182 208 227 - 1500129 160 172 197 215 - 1200123 153 164 188 204 - 1000119 148 159 182 198 - 900112 140 150 172 187 - 750


Upright Type280▼

355

- 1500- 1200- 1000- 900- 750


r/min

H.SpeedShaft Speed

r/min

NominalReduction


280

695746

857157

1048669

1199979

152127102

177148118

199166133

231193155

281※

234188

309※

258207

365※

304244

6.45.44.3

180015001200

3834

28.9

474335

585243

666050

857664

998974

11110083

12911697

157141118

172155129

203183153

3.63.22.7

1000900750


315

615040

756350

927761

1018467

12610584

155129104

183153122

213178142

259※

216173

5.74.83.8

180015001200

3430

25.5

423831

514638

565042

706352

867865

1029277

11910789

144130108

3.22.92.4

1000900750


355

554637

665544

816854

887359

1068971

13911693

168140112

195163131

229※

191153

5.14.23.4

180015001200

3128.123.4

3733

27.8

454134

494437

595344

787058

938470

1099882

128115

96

2.82.52.1

1000900750


Upright

C - 39

PN = P750 X 750N

1.000.850.700.55

1.000.870.730.60

20304050












AmbientTemperature




NominalReduction

Ratio

H.SpeedShaft Speed

r/min

Number of Cooling

Fans

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090


Type400▼

450

1800 - 45 64 86 1101500 - 43 61 83 1061200 - 40 58 78 1001000 - 37 54 74 95

900 - 36 52 71 92750 - 33 49 67 87

Quadruple Reduction

Vertical Type400▼

450

1800 - 46 66 89 1141500 - 44 63 85 1091200 - 41 59 80 1031000 - 38 55 75 97

900 - 36 53 72 94750 - 34 49 68 88

Quadruple Reduction

Upright Type400▼

450

1800 - 45 64 86 1101500 - 43 61 83 1061200 - 40 58 78 1001000 - 37 54 74 95

900 - 36 52 71 92750 - 33 49 67 87

NominalReduction

Ratio

H.SpeedShaft Speed

r/min

L.SpeedShaft Speed

r/min

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090

400


4.53.83.0

9.78.16.5

14.412.0

9.6

23.819.915.9

3630

24.21000

900750

2.52.31.9

5.44.84.0

8.07.26.0

13.312.010.0

20.218.215.1

450


4.03.32.7

8.36.95.6

13.010.8

8.7

22.418.614.9

3227.121.7

1000900750

2.22.01.7

4.64.23.5

7.26.55.4

12.511.2

9.4

18.116.313.6

DimensionTables

Horizontal C-66 C-68 C-68 C-68Vertical C-86 C-88 C-88 C-88Upright C-100 C-102 C-102 C-102

C - 40

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles



Fans

H.SpeedShaft Speed

r/min

NominalReduction

Ratio9095 9100 9105 9110 9115 9118 9121 9126 9128 9131 9136137 179 225 246 - 1800 Quadruple

ReductionHorizontal

Type400▼

450

133 174 218 238 - 1500127 166 208 226 - 1200121 159 198 216 - 1000117 155 193 210 - 900111 147 183 198 - 750

144 188 234 - 1800 Quadruple Reduction

Vertical Type400▼

450

138 181 225 - 1500130 171 213 - 1200123 163 202 - 1000119 158 196 - 900113 149 185 - 750


Upright Type400▼

450

- 1500- 1200- 1000- 900- 750


r/min

H.SpeedShaft Speed

r/min

NominalReduction

Ratio9095 9100 9105 9110 9115 9118 9121 9126 9128 9131 9136391.44 380.94 417.44 407.84 Exact Reduction Ratio

400

484032

715948

937862

12210281

4.53.83.0

180015001200

27.224.520.4

403630

524739

686151

2.52.31.9

1000900750


450

4.03.32.7

180015001200

2.22.01.7

1000900750

C-70 C-70 C-70 C-72 Horizontal DimensionTablesC-90 C-90 C-90 Vertical

Upright

C - 41

PN = P750 X 750N

1.000.850.700.55

1.000.870.730.60

20304050












AmbientTemperature



SELECTION Allowable Radial and Axial Loads on Slow Speed Right Angle shaft

Sheet 1

Sheet 2

Applicable to configurations: Double Reduction RR, LL/

Applicable to configurations: Double Reduction RL, LR/

L.SpeedShaft

Speedr/min

Size of Reducer

9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090 9095 9100250 11.8 17.7 17.7 29.4 29.9 32.4 37.8 46.6 39.7 49.1 44.1 77.0 77.0 100.1 100.1 137.8 139.8160 11.8 17.7 20.1 31.4 32.4 33.8 39.7 48.1 41.7 50.5 46.1 89.0 89.0 108.9 108.9 145.7 157.5100 11.8 17.7 25.0 35.3 38.7 39.2 47.1 53.5 47.6 54.4 54.4 99.0 99.0 122.1 122.1 147.6 166.3

63 11.8 17.7 26.5 35.3 42.2 47.1 54.9 62.3 58.9 64.3 65.2 131.5 131.5 125.6 125.6 143.7 165.340 11.8 17.7 26.5 35.3 42.2 49.1 54.9 67.7 71.1 78.0 79.0 141.0 141.0 125.1 125.1 137.8 164.825 11.8 17.7 26.5 35.3 42.2 49.1 54.9 67.7 81.4 95.2 99.1 139.5 139.5 122.6 122.6 135.4 163.3

250 71.1 93.7 70.1 122.5 122.5 141.8 141.8 158.9 181.0160 78.0 94.7 77.5 137.5 137.5 132.4 132.4 151.6 174.6100 81.4 98.1 92.2 149.5 149.5 127.0 127.0 147.6 166.8

63 81.4 98.1 114.8 149.0 149.0 125.6 125.6 143.7 165.840 81.4 98.1 117.7 148.5 148.5 125.1 125.1 137.8 165.325 81.4 98.1 117.7 147.0 147.0 122.6 122.6 135.4 163.8

L.SpeedShaft

Speedr/min

Size of Reducer

9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090 9095 9100250 8.3 15.2 9.8 21.6 19.1 21.6 22.6 31.4 16.7 28.4 17.2 44.0 44.0 58.4 58.4 97.6 80.4160 9.8 17.7 12.3 23.1 20.6 23.1 24.0 31.4 18.1 27.0 17.7 55.5 55.5 64.3 64.3 103.0 96.1100 11.8 17.7 16.7 29.4 26.0 27.5 28.4 35.3 22.1 30.4 25.5 63.5 63.5 74.6 74.6 110.9 105.9

63 11.8 17.7 21.6 35.3 32.9 35.3 37.3 42.7 33.4 38.3 33.8 95.0 95.0 104.5 104.5 148.1 153.540 11.8 17.7 26.5 35.3 41.7 43.7 48.6 55.4 45.1 51.5 47.6 129.0 129.0 146.7 146.7 172.2 203.625 11.8 17.7 26.5 35.3 42.2 49.1 54.9 67.7 60.8 68.7 67.7 167.0 167.0 171.2 171.2 171.2 215.3

250 46.1 74.6 40.2 90.0 90.0 114.8 114.8 156.0 150.6160 52.0 72.1 45.6 103.5 103.5 125.1 125.1 164.8 170.7100 60.3 79.0 59.4 116.0 116.0 140.8 140.8 176.1 187.4

63 81.4 96.6 80.0 152.5 152.5 174.1 174.1 186.9 218.840 81.4 98.1 108.9 192.0 192.0 191.8 191.8 193.7 241.825 81.4 98.1 117.7 180.5 180.5 171.2 171.2 171.2 214.8

L.SpeedShaft

Speedr/min

Size of Reducer

9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090 9095 9100250 9.3 11.4 14.7 23.1 26.5 31.4 32.9 31.9 27.0 43.2 28.0 28.0 23.5 23.5 31.4 52.0 45.1160 9.3 11.4 18.1 23.1 28.4 31.4 33.4 31.9 28.9 43.2 28.4 28.4 27.5 27.5 34.3 53.0 53.0100 9.3 11.4 24.5 23.1 32.9 31.4 37.3 31.9 34.3 43.2 39.7 39.7 32.9 32.9 43.2 59.4 58.4

63 9.3 11.4 26.5 23.1 32.9 31.4 37.3 31.9 49.1 43.2 52.5 52.5 45.6 45.6 54.0 59.8 81.440 9.3 11.4 26.5 23.1 32.9 31.4 37.3 31.9 49.1 43.2 61.4 61.4 63.3 60.3 59.8 59.8 83.425 9.3 11.4 26.5 23.1 32.9 31.4 37.3 31.9 49.1 43.2 61.4 61.4 67.7 60.3 59.8 59.8 83.4

250 23.1 34.8 18.6 18.6 56.9 56.9 59.8 59.8 83.4160 25.0 33.4 21.1 21.1 56.9 56.9 59.8 59.8 83.4100 29.4 36.8 27.5 27.5 56.9 56.9 59.8 59.8 83.4

63 39.2 43.2 36.3 36.3 56.9 56.9 59.8 59.8 83.440 39.2 43.2 49.1 49.1 56.9 56.9 59.8 59.8 83.425 39.2 43.2 56.9 56.9 56.9 56.9 59.8 59.8 83.4

C - 42

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles


Heavyduty

bearingmodel


Heavyduty

bearingmodel


Heavyduty

bearingmodel


Triple Reduction RL, LR/Quadruple Reduction RR, LL

Triple Reduction RR, LL/Quadruple Reduction RL, LR

Unit: kN

Unit: kN

Unit: kN

Notes

1 The value shown in the table is allowable radial load when it is applied to the center of the solid shaft (except hollow shaft).

Consult us when a load is not in the center. 2. Consult us for the blanks in the table. 3. Consult us when the radial load is applied upward. 4. In case of double projection shaft (RB, LB)




Size of ReducerL.Speed

ShaftSpeedr/min9105 9110 9115 9118 9121 9126 9128 9131 9136

192.3 167.8 222.7 250200.6 174.1 234.9 160183.9 184.9 245.7 391.9 352.7 330.6 315.4 403.2 391.9 100178.1 190.8 303.1 387.5 369.3 341.4 328.6 462.5 430.7 63173.6 194.7 320.8 460.1 449.3 401.2 409.6 572.4 511.1 40167.3 184.9 316.4 448.3 554.8 497.4 534.6 733.8 638.6 25213.9 250.6 316.9 250200.6 214.8 334.5 160183.9 195.2 340.9 100178.1 190.8 333.5 63173.6 194.7 320.8 40167.3 184.9 316.4 25


ShaftSpeedr/min9105 9110 9115 9118 9121 9126 9128 9131 9136

131.5 94.2 152.5 250138.3 92.2 155.0 160146.7 101.0 167.3 312.0 228.1 197.7 159.4 203.6 190.3 100200.1 144.7 220.7 292.3 244.3 206.0 170.7 260.9 218.8 63235.4 199.1 250.2 373.3 322.7 257.0 250.2 369.3 286.5 40304.1 272.7 353.2 460.1 427.2 348.7 373.3 528.3 398.3 25213.4 191.3 248.7 250223.2 197.7 261.4 160236.9 210.4 274.2 100301.7 267.8 341.9 63304.1 323.7 382.1 40304.1 323.7 374.7 25


ShaftSpeedr/min9105 9110 9115 9118 9121 9126 9128 9131 9136

50.0 50.0 76.5 25049.5 49.5 76.5 16054.0 54.0 83.4 119.7 121.6 116.7 91.2 113.3 107.9 10074.6 74.6 83.4 119.7 121.6 121.6 96.6 140.3 122.6 6383.4 83.4 83.4 119.7 121.6 121.6 134.9 191.3 155.5 4083.4 83.4 83.4 119.7 121.6 121.6 144.2 192.3 192.3 2583.4 83.4 83.4 25083.4 83.4 83.4 16083.4 83.4 83.4 10083.4 83.4 83.4 6383.4 83.4 83.4 4083.4 83.4 83.4 25




Flat Belt 2.5

RB LB

DoubleReduction

Ratio

1

1

1

1

1

2

2

2

2

2

2

Triple Reduction

Ratio

QuadrupleReduction

Ratio

C - 43


Heavyduty

bearingmodel


Heavyduty

bearingmodel


Heavyduty

bearingmodel




Applicable to configurations: Double Reduction RR, LL/

Applicable to configurations: Double Reduction RL, LR/

L.SpeedShaft

Speedr/min

Size of Reducer

9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090 9095 9100250 1200 1800 1800 3000 3050 3300 3850 4750 4050 5000 4500 7850 7850 10200 10200 14050 14250160 1200 1800 2050 3200 3300 3450 4050 4900 4250 5150 4700 9050 9050 11100 11100 14850 16050100 1200 1800 2550 3600 3950 4000 4800 5450 4850 5550 5550 10100 10100 12450 12450 15050 16950

63 1200 1800 2700 3600 4300 4800 5600 6350 6000 6550 6650 13400 13400 12800 12800 14650 1685040 1200 1800 2700 3600 4300 5000 5600 6900 7250 7950 8050 14350 14350 12750 12750 14050 1680025 1200 1800 2700 3600 4300 5000 5600 6900 8300 9700 10100 14200 14200 12500 12500 13800 16650

250 7250 9550 7150 12500 12500 14450 14450 16200 18450160 7950 9650 7900 14000 14000 13500 13500 15450 17800100 8300 10000 9400 15250 15250 12950 12950 15050 17000

63 8300 10000 11700 15200 15200 12800 12800 14650 1690040 8300 10000 12000 15150 15150 12750 12750 14050 1685025 8300 10000 12000 15000 15000 12500 12500 13800 16700

L.SpeedShaft

Speedr/min

Size of Reducer

9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090 9095 9100250 850 1550 1000 2200 1950 2200 2300 3200 1700 2900 1750 4500 4500 5950 5950 9950 8200160 1000 1800 1250 2350 2100 2350 2450 3200 1850 2750 1800 5650 5650 6550 6550 10500 9800100 1200 1800 1700 3000 2650 2800 2900 3600 2250 3100 2600 6450 6450 7600 7600 11300 10800

63 1200 1800 2200 3600 3350 3600 3800 4350 3400 3900 3450 9700 9700 10650 10650 15100 1565040 1200 1800 2700 3600 4250 4450 4950 5650 4600 5250 4850 13150 13150 14950 14950 17550 2075025 1200 1800 2700 3600 4300 5000 5600 6900 6200 7000 6900 17000 17000 17450 17450 17450 21950

250 4700 7600 4100 9150 9150 11700 11700 15900 15350160 5300 7350 4650 10550 10550 12750 12750 16800 17400100 6150 8050 6050 11800 11800 14350 14350 17950 19100

63 8300 9850 8150 15550 15550 17750 17750 19050 2230040 8300 10000 11100 19550 19550 19550 19550 19750 2465025 8300 10000 12000 18400 18400 17450 17450 17450 21900

L.SpeedShaft

Speedr/min

Size of Reducer

9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090 9095 9100250 950 1160 1500 2350 2700 3200 3350 3250 2750 4400 2850 2850 2400 2400 3200 5300 4600160 950 1160 1850 2350 2900 3200 3400 3250 2950 4400 2900 2900 2800 2800 3500 5400 5400100 950 1160 2500 2350 3350 3200 3800 3250 3500 4400 4050 4050 3350 3350 4400 6050 5950

63 950 1160 2700 2350 3350 3200 3800 3250 5000 4400 5350 5350 4650 4650 5500 6100 830040 950 1160 2700 2350 3350 3200 3800 3250 5000 4400 6260 6260 6450 6150 6100 6100 850025 950 1160 2700 2350 3350 3200 3800 3250 5000 4400 6260 6260 6900 6150 6100 6100 8500

250 2350 3550 1900 1900 5800 5800 6100 6100 8500160 2550 3400 2150 2150 5800 5800 6100 6100 8500100 3000 3750 2800 2800 5800 5800 6100 6100 8500

63 4000 4400 3700 3700 5800 5800 6100 6100 850040 4000 4400 5000 5000 5800 5800 6100 6100 850025 4000 4400 5800 5800 5800 5800 6100 6100 8500

Sheet 1

Sheet 2

C - 44

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles


Heavyduty

bearingmodel


Heavyduty

bearingmodel


Heavyduty

bearingmodel


Triple Reduction RR, LL/Quadruple Reduction RL ,LR

Triple Reduction RL, LR/Quadruple Reduction RR ,LL


ShaftSpeedr/min9105 9110 9115 9118 9121 9126 9128 9131 9136

19600 17100 22700 25020450 17750 23950 16018750 18850 25050 39950 35950 33700 32150 41100 39950 10018150 19450 30900 39500 37650 34800 33500 47150 43900 6317700 19850 32700 46900 45800 40900 41750 58350 52100 4017050 18850 32250 45700 56550 50700 54500 74800 65100 2521800 25550 32300 25020450 21900 34100 16018750 19900 34750 10018150 19450 34000 6317700 19850 32700 4017050 18850 32250 25


ShaftSpeedr/min9105 9110 9115 9118 9121 9126 9128 9131 9136

13400 9600 15550 25014100 9400 15800 16014950 10300 17050 31800 23250 20150 16250 20750 19400 10020400 14750 22500 29800 24900 21000 17400 26600 22300 6324000 20300 25500 38050 32900 26200 25500 37650 29200 4031000 27800 36000 46900 43550 35550 38050 53850 40600 2521750 19500 25350 25022750 20150 26650 16024150 21450 27950 10030750 27300 34850 6331000 33000 38950 4031000 33000 38200 25


ShaftSpeedr/min9105 9110 9115 9118 9121 9126 9128 9131 9136

5100 5100 7800 2505050 5050 7800 1605500 5500 8500 12200 12400 11900 9300 11550 11000 1007600 7600 8500 12200 12400 12400 9850 14300 12500 638500 8500 8500 12200 12400 12400 13750 19500 15850 408500 8500 8500 12200 12400 12400 14700 19600 19600 258500 8500 8500 2508500 8500 8500 1608500 8500 8500 1008500 8500 8500 638500 8500 8500 408500 8500 8500 25

Unit: kgf

Unit: kgf

Unit: kgf




Flat Belt 2.5

RB LB

1

1

1

1

1

1

2

2

2

2

2

2

DoubleReduction

Ratio

Triple Reduction

Ratio

QuadrupleReduction

Ratio

Notes

1 The value shown in the table is allowable radial load when it is applied to the center of the solid shaft (except hollow shaft).

Consult us when a load is not in the center. 2. Consult us for the blanks in the table. 3. Consult us when the radial load is applied upward. 4. In case of double projection shaft (RB, LB)




C - 45


Heavyduty

bearingmodel


Heavyduty

bearingmodel


Heavyduty

bearingmodel

SELECTION Allowable Radial Load on High Speed Shaft Right Angle shaft

NominalReduction

Ratio

H.SpeedShaft

Speedr/min

Size of Reducer

9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090 9095 91001800 6.4 6.4 8.8 8.8 10.8 10.8 14.7 14.7 13.7 13.7 14.2 14.2 10.3 10.3 11.31500 6.4 6.4 8.8 8.8 11.8 11.8 16.2 16.2 15.2 15.2 16.7 16.7 14.2 14.2 15.71200 6.4 6.4 8.8 8.8 12.8 12.8 18.1 18.1 17.7 17.7 19.1 19.1 18.1 18.1 21.11000 6.4 6.4 8.8 8.8 12.8 12.8 19.1 19.1 19.1 19.1 21.6 21.6 21.1 21.1 24.5

900 6.4 6.4 8.8 8.8 12.8 12.8 20.1 20.1 19.6 19.6 22.1 22.1 21.6 21.6 26.0750 6.4 6.4 8.8 8.8 12.8 12.8 21.1 21.1 20.6 20.6 23.5 23.5 23.5 23.5 28.0

1800 6.9 6.9 9.3 9.3 12.3 12.3 16.7 16.7 15.2 15.2 20.1 20.1 20.6 17.7 22.11500 6.9 6.9 9.3 9.3 12.8 12.8 18.6 18.6 17.2 17.2 22.1 22.1 23.1 19.1 25.01200 6.9 6.9 9.3 9.3 13.2 13.2 20.1 20.1 19.1 19.1 25.0 25.0 26.5 21.6 28.91000 6.9 6.9 9.3 9.3 13.2 13.2 21.6 21.6 20.6 20.6 27.5 27.5 29.4 24.0 32.4

900 6.9 6.9 9.3 9.3 13.2 13.2 21.6 21.6 21.1 21.1 28.0 28.0 30.4 25.0 33.8750 6.9 6.9 9.3 9.3 13.2 13.2 21.6 21.6 22.1 22.1 29.4 29.4 31.9 26.5 35.8

1800 6.9 6.9 9.3 9.3 13.7 13.7 19.1 19.1 19.6 19.6 24.5 24.5 27.0 27.0 28.91500 6.9 6.9 9.3 9.3 13.7 13.7 20.6 20.6 21.6 21.6 27.0 27.0 29.4 29.4 32.41200 6.9 6.9 9.3 9.3 13.7 13.7 22.1 22.1 24.0 24.0 29.9 29.9 32.9 32.9 36.31000 6.9 6.9 9.3 9.3 13.7 13.7 22.1 22.1 25.0 25.0 31.9 31.9 35.8 35.8 39.7

900 6.9 6.9 9.3 9.3 13.7 13.7 22.1 22.1 26.0 26.0 32.9 32.9 36.8 36.8 41.7750 6.9 6.9 9.3 9.3 13.7 13.7 22.1 22.1 27.0 27.0 34.3 34.3 36.7 36.7 43.7

NominalReduction

Ratio

H.SpeedShaft

Speedr/min

Size of Reducer

9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090 9095 91001800 5.4 6.4 7.4 7.4 11.8 11.8 10.3 10.3 9.8 9.8 11.8 11.8 9.3 9.31500 5.9 6.9 8.3 8.3 13.2 13.2 11.8 11.8 11.8 11.8 14.2 14.2 9.8 9.81200 5.9 7.8 9.3 9.3 14.7 14.7 14.2 14.2 14.7 14.7 18.1 18.1 14.2 14.21000 5.9 8.3 10.3 10.3 16.2 16.2 15.2 15.2 16.7 16.7 21.1 21.1 19.1 19.1

900 5.9 8.8 10.3 10.3 16.7 16.7 16.2 16.2 17.7 17.7 22.1 22.1 21.6 21.6750 5.9 8.8 11.3 11.3 17.7 17.7 17.2 17.2 18.6 18.6 23.5 23.5 23.5 23.5

1800 6.4 7.4 9.3 9.3 14.2 14.2 12.8 12.8 14.7 14.7 15.2 15.2 11.3 11.3 28.41500 6.4 7.8 10.3 10.3 15.7 15.7 14.2 14.2 16.7 16.7 18.1 18.1 13.7 13.7 30.41200 6.4 8.8 11.3 11.3 17.7 17.7 16.2 16.2 19.6 19.6 21.6 21.6 19.6 19.6 33.81000 6.4 8.8 11.8 11.8 18.6 18.6 17.7 17.7 22.1 22.1 24.5 24.5 24.0 24.0 37.3

900 6.4 8.8 11.8 11.8 19.1 19.1 18.1 18.1 23.1 23.1 25.5 25.5 26.0 26.0 39.2750 6.4 8.8 11.8 11.8 20.1 20.1 19.1 19.1 24.5 24.5 27.5 27.5 28.0 28.0 41.7

1800 6.9 7.8 10.3 10.3 15.2 15.2 13.2 13.2 17.2 17.2 18.1 18.1 19.6 19.6 31.91500 6.9 8.8 11.3 11.3 16.7 16.7 15.2 15.2 19.1 19.1 20.6 20.6 22.6 22.6 34.81200 6.9 9.3 12.3 12.3 18.6 18.6 17.2 17.2 22.1 22.1 24.5 24.5 26.5 26.5 38.71000 6.9 9.3 12.3 12.3 19.6 19.6 18.6 18.6 24.5 24.5 27.5 27.5 30.4 30.4 42.2

900 6.9 9.3 12.3 12.3 20.1 20.1 19.1 19.1 25.0 25.0 28.4 28.4 32.4 32.4 44.1750 6.9 9.3 12.3 12.3 21.1 21.1 20.1 20.1 26.5 26.5 30.4 30.4 34.3 34.3 46.6

6.3▼

8

9▼

10

11.2▼

22.4

20▼

25

28▼

50

56▼

90

NominalReduction

Ratio

H.SpeedShaft

Speedr/min

Size of Reducer

9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090 9095 91001800 6.9 6.9 6.9 6.9 9.3 9.3 13.7 13.7 18.6 18.6 20.6 19.6 27.01500 6.9 6.9 6.9 6.9 9.3 9.3 13.7 13.7 20.1 20.1 22.6 21.6 28.91200 6.9 6.9 6.9 6.9 9.3 9.3 13.7 13.7 22.1 22.1 24.5 24.0 32.41000 6.9 6.9 6.9 6.9 9.3 9.3 13.7 13.7 22.1 22.1 26.0 25.0 34.3

900 6.9 6.9 6.9 6.9 9.3 9.3 13.7 13.7 22.1 22.1 26.5 26.0 35.3750 6.9 6.9 6.9 6.9 9.3 9.3 13.7 13.7 22.1 22.1 27.5 27.0 36.8

71▼

450

Double Reduction (kN)

Triple Reduction (kN)

Quadruple Reduction (kN)

C - 46

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles




Flat Belt 2.5


Notes 1 The value shown in the table is allowable radial load when it is

applied to the center of the solid shaft. Consult us when a load is not in the center. 2. Consult us when the radial load due to pulley driving, etc. is

to be applied in the blanks in the table.

Size of ReducerH.Speed

ShaftSpeedr/min

NominalReduction

Ratio9105 9110 9115 9118 9121 9126 9128 9131 91361800150012001000

900750

1800150012001000

900750

18001500

6.4 120012.8 100016.7 90024.0 750

6.3▼

8

9▼

10

11.2▼

22.4


ShaftSpeedr/min

NominalReduction

Ratio9105 9110 9115 9118 9121 9126 9128 9131 913611.3 9.3 9.3 9.3 180015.7 14.7 14.7 14.7 150021.1 22.1 22.1 22.1 120024.5 27.5 27.5 27.5 100026.0 29.9 29.9 29.9 90028.0 32.4 32.4 32.4 75012.8 28.4 23.5 12.8 28.4 21.1 51.5 80.4 76.5 180016.2 32.4 26.0 18.6 32.9 24.5 56.9 88.8 82.9 150021.1 37.3 29.4 26.5 38.3 29.4 64.7 99.6 91.7 120025.0 41.7 32.4 31.9 42.7 34.8 71.1 108.9 99.1 100026.5 44.1 33.8 34.3 45.6 37.8 75.0 114.8 103.5 90028.4 46.6 35.3 37.3 49.1 41.2 80.0 125.1 111.8 75028.9 34.8 33.4 30.9 33.4 23.5 56.4 91.7 82.4 180031.9 38.7 36.8 34.8 37.3 29.4 62.3 100.1 88.8 150036.3 43.7 42.2 39.7 42.7 35.8 70.1 111.3 100.1 120039.7 48.1 46.6 44.1 47.6 40.2 76.5 121.2 109.4 100041.7 50.5 49.1 47.1 50.0 43.2 80.4 126.5 115.3 90043.7 53.0 52.0 49.5 54.0 47.1 83.9 137.3 126.1 750

20▼

25

28▼

50

56▼

90


ShaftSpeedr/min

NominalReduction

Ratio9105 9110 9115 9118 9121 9126 9128 9131 913626.0 21.6 20.1 15.2 19.6 13.7 19.6 23.5 10.3 180028.0 23.5 22.6 17.2 22.1 17.2 22.6 27.0 15.7 150030.9 26.5 25.5 20.1 25.5 21.1 27.0 31.9 23.1 120033.4 28.9 27.5 22.6 28.4 24.0 30.4 36.3 28.0 100033.8 29.4 28.4 23.1 29.4 24.5 31.9 38.7 30.4 90035.3 30.9 29.9 24.5 30.9 26.5 33.8 41.7 32.9 750

71▼

450

Unit: kN

Unit: kN

Unit: kN

C - 47

SELECTION Allowable Radial Load on High Speed Right Angle shaft

NominalReduction

Ratio

H.SpeedShaft

Speedr/min

Size of Reducer

9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090 9095 91001800 550 650 750 750 1200 1200 1050 1050 1000 1000 1200 1200 950 9501500 600 700 850 850 1350 1350 1200 1200 1200 1200 1450 1450 1000 10001200 600 800 950 950 1500 1500 1450 1450 1500 1500 1850 1850 1450 14501000 600 850 1050 1050 1650 1650 1550 1550 1700 1700 2150 2150 1950 1950

900 600 900 1050 1050 1700 1700 1650 1650 1800 1800 2250 2250 2200 2200750 600 900 1150 1150 1800 1800 1750 1750 1900 1900 2400 2400 2400 2400

1800 650 750 950 950 1450 1450 1300 1300 1500 1500 1550 1550 1150 1150 29001500 650 800 1050 1050 1600 1600 1450 1450 1700 1700 1850 1850 1400 1400 31001200 650 900 1150 1150 1800 1800 1650 1650 2000 2000 2200 2200 2000 2000 34501000 650 900 1200 1200 1900 1900 1800 1800 2250 2250 2500 2500 2450 2450 3800

900 650 900 1200 1200 1950 1950 1850 1850 2350 2350 2600 2600 2650 2650 4000750 650 900 1200 1200 2050 2050 1950 1950 2500 2500 2800 2800 2850 2850 4250

1800 700 800 1050 1050 1550 1550 1350 1350 1750 1750 1850 1850 2000 2000 32501500 700 900 1150 1150 1700 1700 1550 1550 1950 1950 2100 2100 2300 2300 35501200 700 950 1250 1250 1900 1900 1750 1750 2250 2250 2500 2500 2700 2700 39501000 700 950 1250 1250 2000 2000 1900 1900 2500 2500 2800 2800 3100 3100 4300

900 700 950 1250 1250 2050 2050 1950 1950 2550 2550 2900 2900 3300 3300 4500750 700 950 1250 1250 2150 2150 2050 2050 2700 2700 3100 3100 3500 3500 4750

6.3▼

8

9▼

10

11.2▼

22.4

NominalReduction

Ratio

H.SpeedShaft

Speedr/min

Size of Reducer

9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090 9095 91001800 650 650 900 900 1100 1100 1500 1500 1400 1400 1450 1450 1050 1050 11501500 650 650 900 900 1200 1200 1650 1650 1550 1550 1700 1700 1450 1450 16001200 650 650 900 900 1300 1300 1850 1850 1800 1800 1950 1950 1850 1850 21501000 650 650 900 900 1300 1300 1950 1950 1950 1950 2200 2200 2150 2150 2500

900 650 650 900 900 1300 1300 2050 2050 2000 2000 2250 2250 2200 2200 2650750 650 650 900 900 1300 1300 2150 2150 2100 2100 2400 2400 2400 2400 2850

1800 700 700 950 950 1250 1250 1700 1700 1550 1550 2050 2050 2100 1800 22501500 700 700 950 950 1300 1300 1900 1900 1750 1750 2250 2250 2350 1950 25501200 700 700 950 950 1350 1350 2050 2050 1950 1950 2550 2550 2700 2200 29501000 700 700 950 950 1350 1350 2200 2200 2100 2100 2800 2800 3000 2450 3300

900 700 700 950 950 1350 1350 2200 2200 2150 2150 2850 2850 3100 2550 3450750 700 700 950 950 1350 1350 2200 2200 2250 2250 3000 3000 3250 2700 3650

1800 700 700 950 950 1400 1400 1950 1950 2000 2000 2500 2500 2750 2750 29501500 700 700 950 950 1400 1400 2100 2100 2200 2200 2750 2750 3000 3000 33001200 700 700 950 950 1400 1400 2250 2250 2450 2450 3050 3050 3350 3350 37001000 700 700 950 950 1400 1400 2250 2250 2550 2550 3250 3250 3650 3650 4050

900 700 700 950 950 1400 1400 2250 2250 2650 2650 3350 3350 3750 3750 4250750 700 700 950 950 1400 1400 2250 2250 2750 2750 3500 3500 3950 3950 4450

20▼

25

28▼

50

56▼

90

NominalReduction

Ratio

H.SpeedShaft

Speedr/min

Size of Reducer

9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090 9095 91001800 700 700 700 700 950 950 1400 1400 1900 1900 2100 2000 27501500 700 700 700 700 950 950 1400 1400 2050 2050 2300 2200 29501200 700 700 700 700 950 950 1400 1400 2250 2250 2500 2450 33001000 700 700 700 700 950 950 1400 1400 2250 2250 2650 2550 3500

900 700 700 700 700 950 950 1400 1400 2250 2250 2700 2650 3600750 700 700 700 700 950 950 1400 1400 2250 2250 2800 2750 3750

71▼

450

Triple Reduction (kgf)

Quadruple Reduction (kgf)

Double Reduction (kgf)

C - 48

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles




Flat Belt 2.5


Unit: kgf


ShaftSpeedr/min

NominalReduction

Ratio9105 9110 9115 9118 9121 9126 9128 9131 91361800150012001000

900750

1800150012001000

900750

18001500

650 12001300 10001700 9002450 750

6.3▼

8

9▼

10

11.2▼

22.4


ShaftSpeedr/min

NominalReduction

Ratio9105 9110 9115 9118 9121 9126 9128 9131 91361150 950 950 950 18001600 1500 1500 1500 15002150 2250 2250 2250 12002500 2800 2800 2800 10002650 3050 3050 3050 9002850 3300 3300 3300 7501300 2900 2400 1300 2900 2150 5250 8200 7800 18001650 3300 2650 1900 3350 2500 5800 9050 8450 15002150 3800 3000 2700 3900 3000 6600 10150 9350 12002550 4250 3300 3250 4350 3550 7250 11100 10100 10002700 4500 3450 3500 4650 3850 7650 11700 10550 9002900 4750 3600 3800 5000 4200 8150 12750 11400 7502950 3550 3400 3150 3400 2400 5750 9350 8400 18003250 3950 3750 3550 3800 3000 6350 10200 9050 15003700 4450 4300 4050 4350 3650 7150 11350 10200 12004050 4900 4750 4500 4850 4100 7800 12350 11150 10004250 5150 5000 4800 5100 4400 8200 12900 11750 9004450 5400 5300 5050 5500 4800 8550 14000 12850 750


ShaftSpeedr/min

NominalReduction

Ratio9105 9110 9115 9118 9121 9126 9128 9131 91362650 2200 2050 1550 2000 1400 2000 2400 1050 18002850 2400 2300 1750 2250 1750 2300 2750 1600 15003150 2700 2600 2050 2600 2150 2750 3250 2350 12003400 2950 2800 2300 2900 2450 3100 3700 2850 10003450 3000 2900 2350 3000 2500 3250 3950 3100 9003600 3150 3050 2500 3150 2700 3450 4250 3350 750

Unit: kgf

Unit: kgf

71▼

450

20▼

25

28▼

50

56▼

90




C - 49

SpeedReducer

C - 50

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

Size A B C D E E1 E2 F FY G H J K L O P Y

9015 507 160 427 90 135 270 309 299 129 70 22 15 95 440 170 205 3009025 545 175 465 95 155 310 346 339 142 80 25 19 110 505 195 235 3459030 645 200 535 110 160 320 353 349 154 90 28 24 120 590 215 265 4109035 676 219 566 129 185 370 399 154 90 28 24 120 640 215 265 4609040 705 235 595 120 200 400 431 172 115 30 28 150 685 255 315 4559045 744 256 634 141 220 440 471 172 115 30 28 150 745 255 315 5159050 755 255 645 138.5 210 420 451 192 116.5 32 28 150 775 285 345 5429055 794 286 684 171 245 490 521 192 115 32 28 150 845 285 345 615

SizeHight Speed Shaft Fan

RC1 RC2 Wt.kg

OilQty.

LR S W2/DepthKey

FA FB FC FDX2 Y2 Z2 L2

9015 80 28k6 M12/28 8 4 7 70 125 125 50 30 3/4" 3/4" 95 59025 80 35k6 M12/28 10 5 8 70 135 140 50 30 3/4" 3/4" 140 79030 110 40k6 M16/36 14 5.5 9 95 150 140 80 52 3/4" 3/4" 205 109035 110 40k6 M16/36 14 5.5 9 95 150 140 80 52 3/4" 3/4" 225 129040 110 45k6 M16/36 14 5.5 9 95 170 160 80 52 1" 1" 305 169045 110 45k6 M16/36 14 5.5 9 95 170 160 80 52 1" 1" 365 189050 110 50k6 M16/36 14 5.5 9 95 190 160 80 52 1" 1" 435 219055 110 50k6 M16/36 14 5.5 9 95 190 160 80 52 1" 1" 495 28

FA

FB

FA

FD

FC

KD

G Y GL

K4- J

E1F

HL

RC1

RC2

B AC R

L2

OP

E H

RC1E

2

FY

Z2

W2

Y2 X2

S

1. Key and keyways are based on ISO R773-1969 Close keys (JIS B1301-1996 Parallel key in fastening type)2. The oil quantity is approximate. Oil shall be supplied within the range shown on the oil gauge.3. Refer to the page D-12 for dimensions shown in these drawings.

[Fig. 1] Location of oil fill and air vent for Size 9015 9030 with reduction ratio 6.3 or 7.1

Location of oil fill and air vent changes for Size 9015 9030 with reduction ratio 6.3 or 7.1. Refer to Fig. 1.

Unit: mm

High Speed ShaftWith Fan

Refer to the page D-20 for details.

4. Refer to the page D -24 for the dimension of optional parts.

DIMENSIONS Right Angle Shaft Double Reduction Horizontal Mounting 9015 9055

RL RR RB LR LL LB


L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2

Slow Speed Shaft


Refer to the page D-18 for details. Refer to the page D-18 for details.

H

L

C - 51



Backstop(Option)


P H A R 2 - -

RLRRRBLRLLLB

90159025903090359040904590509055

PH

AR

90159055

2PARAMAX

HorizontalMonoblock

Right AngleDouble

Reduction

Unit: mm






90159025903090359040904590509055

Nomenclature

(blank)T

K



(blank)F

: Without Fan: With Fan

SizeShaft

Arrangement

Low Speed ShaftType

NominalReduction RatioFan


SpeedReducer

C - 52

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

B AC R

L2

G

KD

Y G

K4- J

FE

1E

2

RC

L

EH

OP

FAFB

FA

FDFC

FY

Z2

W2

Y2 X2

S

Unit: mm




9060 865 299 725 151 265 530 183 578 212 135 35 35 180 885 310 380 6159065 911 338 771 190 300 600 148 648 212 135 35 35 180 970 310 380 7009070 965 336 825 163 300 600 213 648 237 160 40 42 215 1020 350 430 7009075 1018 383 878 210 335 670 178 718 237 160 52 42 220 1120 350 430 8009080 1080 378 940 205 335 670 236 718 257 160 52 42 220 1155 380 460 8359085 1136 422 996 249 375 750 196 798 257 160 52 42 220 1255 380 460 935


RC Wt.kg

OilQty.

LR S W2/DepthKey


9060 140 60m6 M20/42 18 7 11 125 220 160 105 65 1" 600 259065 140 60m6 M20/42 18 7 11 125 220 160 105 65 1" 725 299070 140 65m6 M20/42 18 7 11 125 245 200 105 65 1" 920 379075 140 65m6 M20/42 18 7 11 125 245 200 105 65 1" 1170 469080 140 75m6 M20/42 20 7.5 12 125 270 225 105 60 1" 1300 539085 140 75m6 M20/42 20 7.5 12 125 270 225 105 60 1" 1560 67



4. Refer to the page D-27 for the dimension of optional parts.


RL RR RB LR LL LB


L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2

Slow Speed Shaft



H

L

C - 53



Backstop(Option)





9060 440 230 210 125m6 M24/50 32 11 18 185 583 353 230 128 125 470 235 235 125 1239065 484 234 250 140m6 M30/60 36 12 20 225 594 359 235 143 140 480 240 240 145 1439070 509 259 250 145m6 M30/60 36 12 20 225 644 384 260 148 145 530 265 265 145 1439075 562 262 300 160m6 M30/60 40 13 22 275 651 386 265 158 155 530 265 265 150 1489080 582 282 300 165m6 M30/60 40 13 22 275 714 429 285 173 170 570 285 285 165 1639085 585 285 300 175m6 M30/60 45 15 25 270 714 429 285 183 180 570 285 285 175 173

P H D R 2 - -

RLRRRBLRLLLB

906090659070907590809085

PH

DR

90609085

2

Unit: mm


906090659070907590809085

Nomenclature

(blank)T

K



(blank)F


SizeShaft

Arrangement

Low Speed ShaftType



PARAMAXHorizontal

SplitRight Angle

Double Reduction

C - 54

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles


Size A B C D E F G H1 H2 J L O P Y

9095 1393 460 1223 190 450 895 85 39 27 42 1090 520 610 4609105 1589 500 1379 210 500 995 90 39 27 42 1220 570 660 5209115 1802 560 1592 240 560 1120 100 46 34 48 1390 630 730 595


RC Wt.kg

OilQty.

LR S W2/DepthKey


9095 170 90m6 M24/50 25 9 14 150 340 250 135 90 1 1/2" 2050 1009105 210 100m6 M24/50 28 10 16 190 380 250 175 130 1 1/2" 2800 1509115 210 110m6 M24/50 28 10 16 190 410 250 175 130 1 1/2" 3800 200

CAB

RL2

FC

FBFA

FA

FD

PO

E

HL

F

LYG G

D

H1

H2

RC

Y6- J

Z2

W2

Y2 X2

S

Unit: mm



3. Consult us for the dimensions not shown in these drawings.



• In case of continuous load, the forced oil lubrication is necessary. For details, consult us.

RL RR RB LR LL LBStandard Shaft Arrangement Configuration

H

L

C - 55

L1U1

TU1T1

V1

W1

Z1Y1

X1

TU2U2 T2

V3V2

Slow Speed Shaft

Solid Shaft Hollow Shaft (Shrink Disk Type)




Backstop(Option)


SizeSolid Shaft Hollow Shaft (Shrink Disk Type)


TU2 T2 U2 V2 V3X1 Y1 Z1 L1

9095 700 350 350 190m6 M30/60 45 15 25 320 859 509 350 203 2009105 740 390 350 220m6 M30/60 50 17 28 320 949 559 390 223 2209115 830 420 410 240m6 M30/60 56 20 32 375 1065 645 420 253 250

P H D R 2 A - -

RLRRRBLRLLLB

909591059115

PH

DR

90959115

2PARAMAX

HorizontalSplit

Right AngleDouble

Reduction

ASteelHousing

Unit: mm

Size Nominal Reduction Ratio6.3 7.1 8 9 10 11.2 12.5 14 16 18 20

909090959100910591109115

Nomenclature

(blank)T


(Shrink Disk type)

(blank)F


SizeShaft

Arrangement

Low Speed ShaftType



SpeedReducer

C - 56

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

B AC R

L2

BH

BD

OP

E

H

FA

FB

FA

FDFC

KD

G Y GL

K4- J

E1F

HL

RC1

RC2

Z2

W2

Y2 X2

S



Unit: mm

Size A B C D E E1 F G H J K L O P Y

9030 656 200 576 110 160 320 349 90 28 24 120 590 215 265 410

9035 687 219 607 129 185 370 399 90 28 24 120 640 215 265 460

9040 716 235 636 120 200 400 431 115 30 28 150 685 255 315 455

9045 755 256 675 141 220 440 471 115 30 28 150 745 255 315 515

9050 808 255 728 138.5 210 420 451 116.5 32 28 150 775 285 345 542

9055 847 286 767 171 245 490 521 115 32 28 150 845 285 345 615

SizeHight Speed Shaft Fan Backstop

RC1 RC2 Wt.kg

OilQty.

LR S W2/DepthKey

FA FB FC FD BD BHX2 Y2 Z2 L2

9030 80 28k6 M10/22 8 4 7 70 150 125 50 30 3/4" 3/4" 210 109035 80 28k6 M10/22 8 4 7 70 150 125 50 30 3/4" 3/4" 230 129040 80 30k6 M10/22 8 4 7 70 170 125 50 30 1" 1" 305 169045 80 30k6 M10/22 8 4 7 70 170 125 50 30 1" 1" 365 189050 80 35k6 M12/28 10 5 8 70 190 140 50 22 150 263 1" 1" 445 219055 80 35k6 M12/28 10 5 8 70 190 140 50 22 150 263 1" 1" 505 28



DIMENSIONS Right Angle Shaft Triple Reduction Horizontal Mounting 9030 9055

RL RR RB LR LL LB


L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2

Slow Speed Shaft



H

L

C - 57



Backstop(Option)





9030 330 160 170 80m6 M20/42 22 9 14 150 393 233 160 83 80 330 165 165 75 759035 330 160 170 90m6 M20/42 25 9 14 150 403 243 160 88 85 330 165 165 85 859040 349 179 170 95m6 M24/50 25 9 14 150 448 268 180 98 95 360 180 180 90 909045 391 181 210 105m6 M24/50 28 10 16 190 463 283 180 108 105 370 185 185 105 1059050 411 201 210 110m6 M24/50 28 10 16 190 503 303 200 108 105 410 205 205 105 1059055 411 201 210 120m6 M24/50 32 11 18 185 528 323 205 123 120 410 205 205 115 115

P H A R 3 - -

RLRRRBLRLLLB

903090359040904590509055

(blank)FB

FB

: Without Fan: With Fan: With Backstop: With Fan & Backstop

PH

AR

90309055

3PARAMAX

HorizontalMonoblock

Right AngleTriple

Reduction

Unit: mm


903090359040904590509055

Nomenclature

(blank)T

K



SizeShaft

Arrangement

Low Speed ShaftType



Option

SpeedReducer

C - 58

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

Size A B C D E E1 E2 F G H J K L O P Y

9060 939 299 829 151 265 530 158 578 135 35 35 180 885 310 380 6159065 985 338 875 190 300 600 123 648 135 35 35 180 970 310 380 7009070 1027 336 917 163 300 600 183 648 160 40 42 215 1020 350 430 7009075 1080 383 970 210 335 670 148 718 160 52 42 220 1120 350 430 8009080 1176 378 1036 205 335 670 208 718 160 52 42 220 1155 380 460 8359085 1232 422 1092 249 375 750 168 798 160 52 42 220 1255 380 460 935

SizeHight Speed Shaft Fan Backstop

RC Wt.kg

OilQty.

LR S W2/DepthKey


9060 110 45k6 M16/36 14 5.5 9 95 220 160 80 52 175 308 1" 660 299065 110 45k6 M16/36 14 5.5 9 95 220 160 80 52 175 308 1" 785 339070 110 50k6 M16/36 14 5.5 9 95 245 160 80 52 190 330 1" 940 459075 110 50k6 M16/36 14 5.5 9 95 245 160 80 52 190 330 1" 1190 529080 140 60m6 M20/42 18 7 11 125 270 160 105 65 210 365 1" 1350 609085 140 60m6 M20/42 18 7 11 125 270 160 105 65 210 365 1" 1610 75

Unit: mm



EH

OPG

KD

Y G

K4- J

FE

1E

2

RC

LFA

FDFC

FBFA

B AC R

L2

BH

BD

Z2

W2

Y2 X2

S





RL RR RB LR LL LB


L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2

Slow Speed Shaft



H

L

C - 59



Backstop(Option)





9060 440 230 210 125m6 M24/50 32 11 18 185 583 353 230 128 125 470 235 235 125 1239065 484 234 250 140m6 M30/60 36 12 20 225 594 359 235 143 140 480 240 240 145 1439070 509 259 250 145m6 M30/60 36 12 20 225 644 384 260 148 145 530 265 265 145 1439075 562 262 300 160m6 M30/60 40 13 22 275 651 386 265 158 155 530 265 265 150 1489080 582 282 300 165m6 M30/60 40 13 22 275 714 429 285 173 170 570 285 285 165 1639085 585 285 300 175m6 M30/60 45 15 25 270 714 429 285 183 180 570 285 285 175 173

P H D R 3 - -

RLRRRBLRLLLB

906090659070907590809085

PH

DR

90609085

3PARAMAX

HorizontalSplit

Right AngleTriple

Reduction

Unit: mm


906090659070907590809085

Nomenclature

(blank)T

K



(blank)FB

FB


SizeShaft

Arrangement

Low Speed ShaftType



Option

C - 60

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

Size A B C D E E1 E2 F G H J K1 K2 K3 L O P Y

9090 1320 428 1180 345 375 750 253 797 60 50 42 270 250 210 1440 480 570 6609095 1350 458 1210 375 400 800 258 847 60 50 42 290 250 210 1500 480 570 6909100 1474 468 1334 375 425 850 282 897 70 55 48 300 280 240 1610 560 650 7359105 1508 493 1368 410 450 900 287 947 70 55 48 320 280 240 1680 560 650 7709110 1684 508 1514 420 475 950 303 997 75 60 56 340 310 260 1810 610 710 8309115 1733 558 1563 470 500 1000 302 1047 75 60 56 350 310 260 1910 610 710 880


RC Wt.kg

OilQty.

LR S W2/DepthKey


9090 140 65m6 M20/42 18 7 11 125 340 200 105 65 1 1/2" 2150 1209095 140 65m6 M20/42 18 7 11 125 340 200 105 65 1 1/2" 2400 1559100 140 75m6 M20/42 20 7.5 12 125 380 225 105 60 1 1/2" 2880 1809105 140 75m6 M20/42 20 7.5 12 125 380 225 105 60 1 1/2" 3440 2209110 170 85m6 M20/42 22 9 14 150 410 225 135 90 1 1/2" 4160 2509115 170 85m6 M20/42 22 9 14 150 410 225 135 90 1 1/2" 4610 310

Unit: mm



FB

FA

FCFD

FA

EH

OP

D

E1

E2

F

G G

K1 K2 K3

LY YRC

6- J

AB C R

L2

B (9090 9100)

Z2

W2

Y2 X2

S

(9105 9115)

3. Refer to the page D -16 for dimensions shown in these drawings.





H

L

C - 61

L1U1

TU1T1

V1

W1

Z1Y1

X1

TU2U2 T2

V3V2

Slow Speed Shaft





Backstop(Option)



909090959100910591109115



TU2 T2 U2 V2 V3X1 Y1 Z1 L1

9090 650 350 300 180m6 M30/60 45 15 25 270 844 494 350 193 1909095 700 350 350 190m6 M30/60 45 15 25 320 859 509 350 203 2009100 740 390 350 200m6 M30/60 45 15 25 320 934 544 390 213 2109105 740 390 350 220m6 M30/60 50 17 28 320 949 559 390 223 2209110 770 420 350 220m6 M30/60 50 17 28 320 1030 610 420 243 2409115 830 420 410 240m6 M30/60 56 20 32 375 1065 645 420 253 250

P H D R 3 - -

RLRRRBLRLLLB

909090959100910591109115

PH

DR

90909115

3PARAMAX

HorizontalSplit

Right AngleTriple

Reduction

Unit: mm

Nomenclature

(blank)T


(Shrink Disk type)

(blank)F


SizeShaft

Arrangement

Low Speed ShaftType



C - 62

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles Size Ratio A B C D E E1 E2 F G H J K1 K2 K3 L O P Y

9118 ALL 1774 608 1604 490 535 1070 343 1117 95 65 56 350 320 260 1990 610 710 900

912131.5 2053 663 1843 545 580 1160 357 1207 95 70 56 390 300 270 2180 680 780 99535.5 2013 663 1843 545 580 1160 357 1207 95 70 56 390 300 270 2180 680 780 995

912631.5 2053 663 1843 545 580 1160 357 1207 95 70 56 390 300 270 2180 680 780 99535.5 2013 663 1843 545 580 1160 357 1207 95 70 56 390 300 270 2180 680 780 995

Size RatioHight Speed Shaft

RC Wt.kg

OilQty.

LR S W2/DepthKey

X2 Y2 Z2 L29118 ALL 170 85m6 M20/42 22 9 14 150 1 1/2" 5200 350

912131.5 210 110m6 M24/50 28 10 16 190 1 1/2" 6200 46035.5 170 90m6 M24/50 25 9 14 150 1 1/2" 6200 460

912631.5 210 110m6 M24/50 28 10 16 190 1 1/2" 6550 46035.5 170 90m6 M24/50 25 9 14 150 1 1/2" 6550 460

Size RatioSolid Shaft


X1 Y1 Z1 L19118 ALL 850 440 410 260m6 M36/70 56 20 32 375

912131.5 935 465 470 280m6 M36/70 63 20 32 42535.5 935 465 470 280m6 M36/70 63 20 32 425

912631.5 935 465 470 300m6 M36/70 70 22 36 42535.5 935 465 470 300m6 M36/70 70 22 36 425

G Y Y GL

DK1 K2 K3

6- J

E

HOP

L1U1

TU1

F E1E2

B AC R

L2

RC

T1

Z1

W1

Y1

X1

V1

Z2

W2

Y2 X2

S

Unit: mm

High Speed ShaftSlow Speed Shaft

1. Key and keyways are based on ISO R773-1969 Close keys (JIS B1301-1996 Parallel key in fastening type)2. The oil quantity is approximate. Oil shall be supplied within the range shown on the oil gauge.3. Consult us for the dimensions not shown in these drawings.


H

L

C - 63




Backstop(Option)


P H D R 3 - -

RLRRRBLRLLLB

911891219126

PH

DR

91189126

3PARAMAX

HorizontalSplit

Right AngleTriple

Reduction

Size Nominal Reduction Ratio25 28 31.5 35.5 40 45 50 56 63 71 80 90

911891219126

Nomenclature

(blank)F

:Without Fan: With Fan

SizeShaft

ArrangementNominal

Reduction RatioFan


C - 64

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles Size A B C D E E1 F G H J K1 K2 L O P Y Y3

9128 2244 680 2034 330 600 1194 1241 140 55 66 940 280 1930 710 840 660 9909131 2479 730 2269 330 630 1256 1303 140 60 66 940 280 2070 850 980 660 11309136 2479 730 2269 330 630 1256 1303 140 60 66 940 280 2070 850 980 660 1130

SizeHight Speed Shaft

RC Wt.kg

OilQty.

LR S W2/DepthKey

X2 Y2 Z2 L29128 210 100m6 M24/50 28 10 16 190 1 1/2" 7400 3509131 210 110m6 M24/50 28 10 16 190 1 1/2" 9850 5109136 210 110m6 M24/50 28 10 16 190 1 1/2" 10200 500

SizeSolid Shaft

TU1 T1 U1 V1 W1/Depth WLKey

X1 Y1 Z1 L19128 950 480 470 320m6 M36/70 200 70 22 36 4259131 1100 550 550 340m6 M36/70 215 80 25 40 5009136 1110 560 550 360m6 M36/70 230 80 25 40 500

GD

K1

GY Y3 G

L

6- JK2

BC R

L2

F E1

A

RC

HL

TU1

U1 T1L1

E

HOP

Z1

W1

Y1

X1

V1WL

Z2

W2

Y2 X2

S

Unit: mm

High Speed ShaftSlow Speed Shaft



H

L

C - 65




Backstop(Option)


P H D R 3 A - -

RLRRRBLRLLLB

912891319136

PH

DR

91289136

3PARAMAX

HorizontalSplit

Right AngleTriple

Reduction

ASteelHousing

Size28 31.5 35.5 40 45 50 56 63 71 80

912891319136

Nomenclature

(blank)F

:Without Fan: With Fan

SizeShaft

ArrangementNominal

Reduction RatioFan


C - 66

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

EH

OP

HL

D

F

GL

G

4- JKK

E1

Y

RC1

RC2

ABC R

L2

BH

BD

Z2

W2

Y2 X2

S

Unit: mm

High Speed Shaft


9040 790 235 710 120 200 400 431 115 30 28 150 759 255 315 529

9045 829 256 749 141 220 440 471 115 30 28 150 819 255 315 589

9050 859 255 779 138.5 210 420 451 116.5 32 28 150 848 285 345 615

9055 898 286 818 171 245 490 521 115 32 28 150 918 285 345 688

SizeHight Speed Shaft Backstop

RC1 RC2 Wt.kg

OilQty.

LR S W2/DepthKey

BD BHX2 Y2 Z2 L2

9040 80 28k6 M10/22 8 4 7 70 1" 1" 325 199045 80 28k6 M10/22 8 4 7 70 1" 1" 395 219050 80 28k6 M10/22 8 4 7 70 150 263 1" 1" 460 249055 80 28k6 M10/22 8 4 7 70 150 263 1" 1" 520 29



DIMENSIONS Right Angle Shaft Quadruple Reduction Horizontal Mounting 9040 9055

RL RR RB LR LL LB


L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2

Slow Speed Shaft



H

L

C - 67



Backstop(Option)





9040 349 179 170 95m6 M24/50 25 9 14 150 448 268 180 98 95 360 180 180 90 909045 391 181 210 105m6 M24/50 28 10 16 190 463 283 180 108 105 370 185 185 105 1059050 411 201 210 110m6 M24/50 28 10 16 190 503 303 200 108 105 410 205 205 105 1059055 411 201 210 120m6 M24/50 32 11 18 185 528 323 205 123 120 410 205 205 115 115

P H A R 4 - -

RLRRRBLRLLLB

9040904590509055

PH

AR

90409055

4PARAMAX

HorizontalMonoblock


Unit: mm


9040904590509055

Nomenclature

(blank)B




(blank)T

K

SizeShaft

Arrangement

Low Speed ShaftType



Option

C - 68

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

EH

OP

KD

G Y GL

K4- J

FE

1E

2

RC

ABC R

L2

BH

BD

Z2

W2

Y2 X2

S

Unit: mm

High Speed Shaft


9060 950 299 870 151 265 530 121 578 135 35 35 180 970 310 380 700

9065 996 338 916 190 300 600 86 648 135 35 35 180 1055 310 380 785

9070 1080 336 1000 163 300 600 140 648 160 40 42 215 1115 350 430 795

9075 1133 383 1053 210 335 670 105 718 160 52 42 220 1215 350 430 895

9080 1250 378 1140 205 335 670 162 718 160 52 42 220 1275 380 460 955

9085 1306 422 1196 249 375 750 122 798 160 52 42 220 1375 380 460 1055

SizeHight Speed Shaft Backstop

RC Wt.kg

OilQty.

LR S W2/DepthKey

BD BHX2 Y2 Z2 L2

9060 80 30k6 M10/22 8 4 7 70 175 308 1" 670 389065 80 30k6 M10/22 8 4 7 70 175 308 1" 825 439070 80 35k6 M12/28 10 5 8 70 190 330 1" 960 579075 80 35k6 M12/28 10 5 8 70 190 330 1" 1180 679080 110 45k6 M16/36 14 5.5 9 95 210 365 1" 1390 739085 110 45k6 M16/36 14 5.5 9 95 210 365 1" 1650 90




RL RR RB LR LL LB


L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2

Slow Speed Shaft



H

L

C - 69



Backstop(Option)


(blank)T

K



(blank)B


Option

PH

DR

90609085

4PARAMAX

HorizontalSplit


P H D R 4 - -

RLRRRBLRLLLB

906090659070907590809085

Unit: mm




9060 440 230 210 125m6 M24/50 32 11 18 185 583 353 230 128 125 470 235 235 125 1239065 484 234 250 140m6 M30/60 36 12 20 225 594 359 235 143 140 480 240 240 145 1439070 509 259 250 145m6 M30/60 36 12 20 225 644 384 260 148 145 530 265 265 145 1439075 562 262 300 160m6 M30/60 40 13 22 275 651 386 265 158 155 530 265 265 150 1489080 582 282 300 165m6 M30/60 40 13 22 275 714 429 285 173 170 570 285 285 165 1639085 585 285 300 175m6 M30/60 45 15 25 270 714 429 285 183 180 570 285 285 175 173


906090659070907590809085

NomenclatureSize

ShaftArrangement

Low Speed ShaftType



C - 70

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

Unit: mm

High Speed Shaft


9090 1382 428 1272 345 375 750 198 797 60 50 42 270 250 210 1440 480 570 660

9095 1412 458 1302 375 400 800 203 847 60 50 42 290 250 210 1500 480 570 690

9100 1570 468 1430 375 425 850 215 897 70 55 48 300 280 240 1610 560 650 735

9105 1604 493 1464 410 450 900 220 947 70 55 48 320 280 240 1680 560 650 770

9110 1670 508 1530 420 475 950 225 997 75 60 56 340 310 260 1810 610 710 830

9115 1719 558 1579 470 500 1000 224 1047 75 60 56 350 310 260 1910 610 710 880


RC Wt.kg

OilQty.

LR S W2/DepthKey

X2 Y2 Z2 L29090 110 50k6 M16/36 14 5.5 9 95 1 1/2" 2150 1509095 110 50k6 M16/36 14 5.5 9 95 1 1/2" 2400 1809100 140 60m6 M20/42 18 7 11 125 1 1/2" 2880 2109105 140 60m6 M20/42 18 7 11 125 1 1/2" 3440 2559110 140 60m6 M20/42 18 7 11 125 1 1/2" 4060 3009115 140 60m6 M20/42 18 7 11 125 1 1/2" 4510 360

EH

OP

6- J

D

E1

E2

F

G G

K1 K2 K3

LY YRC

AC R

L2B

Z2

W2

Y2 X2

S

B (9090 9100)

(9105 9115)





H

L

C - 71

L1U1

TU1T1

V1

W1

Z1Y1

X1

TU2U2 T2

V3V2

Slow Speed Shaft





Backstop(Option)


PH

DR

90909115

4PARAMAX

HorizontalSplit


P H D R 4 - -

RLRRRBLRLLLB

909090959100910591109115

Unit: mm



TU2 T2 U2 V2 V3X1 Y1 Z1 L1

9090 650 350 300 180m6 M30/60 45 15 25 270 844 494 350 193 1909095 700 350 350 190m6 M30/60 45 15 25 320 859 509 350 203 2009100 740 390 350 200m6 M30/60 45 15 25 320 934 544 390 213 2109105 740 390 350 220m6 M30/60 50 17 28 320 949 559 390 223 2209110 770 420 350 220m6 M30/60 50 17 28 320 1030 610 420 243 2409115 830 420 410 240m6 M30/60 56 20 32 375 1065 645 420 253 250

Size Nominal Reduction Ratio90 100 112 125 140 160 180 200 224 250 280 315 355 400

909090959100910591109115

Nomenclature

(blank)T


(Shrink Disk type)

SizeShaft

Arrangement

Low Speed ShaftType



C - 72

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles Size A B C D E E1 E2 F G H J K1 K2 K3 L O P Y

9118 1760 608 1620 490 535 1070 263 1117 95 65 56 350 320 260 1990 610 710 9009121 1970 663 1830 545 580 1160 257 1207 95 70 56 390 300 270 2180 680 780 9959126 1970 663 1830 545 580 1160 257 1207 95 70 56 390 300 270 2180 680 780 995


RC Wt.kg

OilQty.

LR S W2/DepthKey

X2 Y2 Z2 L29118 140 60m6 M20/42 18 7 11 125 1 1/2" 5100 3909121 140 65m6 M20/42 18 7 11 125 1 1/2" 6150 5409126 140 65m6 M20/42 18 7 11 125 1 1/2" 6450 530

SizeSolid Shaft


X1 Y1 Z1 L19118 850 440 410 260m6 M36/70 56 20 32 3759121 935 465 470 280m6 M36/70 63 20 32 4259126 935 465 470 300m6 M36/70 70 22 36 425

F E1

E2

K1 K2 K3D

Y YL

G G6- J

L2R

AC

B

RC

E H

OP

TU1U1L1

T1

Z1

W1

Y1

X1

V1

Z2

W2

Y2 X2

S

High Speed Shaft Slow Speed Shaft

Unit: mm



H

L

C - 73




Backstop(Option)


PH

DR

91189126

4PARAMAX

HorizontalSplit


P H D R 4 - -

RLRRRBLRLLLB

911891219126


911891219126

Nomenclature

SizeShaft

ArrangementNominal

Reduction Ratio


C - 74

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles Size A B C D E E1 F G H J K1 K2 L M O P Y Y3

9128 2163 680 2023 330 600 1194 1241 140 55 66 940 280 1990 170 710 840 660 10509131 2410 730 2240 330 630 1256 1303 140 60 66 940 280 2170 200 850 980 660 12309136 2410 730 2240 330 630 1256 1303 140 60 66 940 280 2170 200 850 980 660 1230


RC Wt.kg

OilQty.

LR S W2/DepthKey

X2 Y2 Z2 L29128 140 75m6 M20/42 20 7.5 12 125 1 1/2" 7400 4609131 170 85m6 M20/42 22 9 14 150 1 1/2" 9850 6809136 170 85m6 M20/42 22 9 14 150 1 1/2" 10200 660

SizeSolid Shaft


X1 Y1 Z1 L19128 950 480 470 320m6 M36/70 200 70 22 36 4259131 1100 550 550 340m6 M36/70 215 80 25 40 5009136 1110 560 550 360m6 M36/70 230 80 25 40 500

A

C

B

E1F

K1

D GY

L

Y3G

K2

G6- J

RL2

TU1

U1L1

T1

E

H

PORC

HL

Z1

W1

Y1

X1

V1WL

Z2

W2

Y2 X2

S

Unit: mm

High Speed Shaft

Slow Speed Shaft



H

L

C - 75




Backstop(Option)


Size Nominal Reduction Ratio71 80 90 100 112 125 140 160 180 200 224 250 280 315 355

912891319136

PH

DR

91289136

4PARAMAX

HorizontalSplit


ASteelHousing

P H D R 4 A - -

RLRRRBLRLLLB

912891319136

Nomenclature

SizeShaft

ArrangementNominal

Reduction Ratio


C - 76

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

E2 E3

NHP

P

HL

NP

C RL2

ABN

1 N2

C1

RC1

MM

OE1

RC24- JK K

LDG GY

RI FAFB

FA

FDFC

Z2

W2

Y2 X2

S

Unit: mm



Size A B C C1 D E1 E2 E3 G H RI J K L M N N1 N2 NP O P Y

9015 507 160 427 115 140 270 195 135 20 35 80 15 95 440 70 189 25 14 100 230 102.5 2609025 545 175 465 135 155 310 215 155 20 40 87.5 19 110 505 75 201.5 23 12 100 270 117.5 3109030 645 200 535 155 175 320 220 160 25 50 105 24 120 590 85 224 22 9 117 270 132.5 3659035 676 219 566 186 194 370 245 185 25 50 120 24 120 640 100 224 22 9 117 320 132.5 3969040 705 235 595 180 205 400 260 200 30 60 120 28 150 685 100 243 15 2 117 340 157.5 4209045 744 256 634 219 226 440 266 220 30 60 140 28 150 745 120 243 17.5 2 117 380 157.5 4599050 755 255 645 210 225 420 270 210 30 60 140 28 150 775 110 259 23 7 137 360 172.5 4909055 794 286 684 249 256 490 305 245 30 60 155 28 150 845 135 259 23 7 137 430 172.5 529


RC1 RC2 Wt.kg

OilQty.

LR S W2/DepthKey




4 Refer to the page D -25 for the dimension of optional parts.

DIMENSIONS Right Angle Shaft Double Reduction Vertical Mounting 9015 9055

H

L

Standard Shaft Arrangement ConfigurationRL RR


L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2

Slow Speed Shaft


C - 77



Backstop(Option)


P V A R 2 - -

RLRR

90159025903090359040904590509055

PV

AR

90159055

2PARAMAX

VerticalMonoblock

Right AngleDouble

Reduction

Unit: mm


90159025903090359040904590509055





Nomenclature

(blank)T

K



(blank)F


FanSizeShaft

Arrangement

Low Speed ShaftType



C - 78

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

E2 E3

H

CP1

PP

NP

N1

RL2

AB

N

4- J

RC1

MM

OE1

K K

LDG GYRC2

RI

C1

FAFB

FA

FDFC

Z2

W2

Y2 X2

S

Unit: mm



Size A B C C1 D E1 E2 E3 G H RI J K L M N N1 NP O P P1 Y

9060 865 299 725 245 251 530 282 265 35 35 160 35 180 885 140 279 35 137 460 190 229 564

9065 911 338 771 291 290 600 317 300 35 35 175 35 180 970 175 279 38 137 530 190 229 610

9070 965 336 825 285 283 600 317 300 40 40 175 42 215 1020 155 310 38 137 520 215 262 657

9075 1018 383 878 338 330 670 352 335 40 52 190 42 220 1120 195 310 40 137 590 215 262 710

9080 1080 378 940 330 325 670 352 335 40 52 190 42 220 1155 170 330 45 137 590 230 295 750

9085 1136 422 996 386 369 750 392 375 40 52 215 42 220 1255 210 330 40 137 670 230 295 806


RC1 RC2 Wt.kg

OilQty.

LR S W2/DepthKey


9060 140 60m6 M20/42 18 7 11 125 220 160 105 65 1" 1" 600Refer to the next

page.

9065 140 60m6 M20/42 18 7 11 125 220 160 105 65 1" 1" 7259070 140 65m6 M20/42 18 7 11 125 245 200 105 65 1" 1" 9209075 140 65m6 M20/42 18 7 11 125 245 200 105 65 1" 1" 11709080 140 75m6 M20/42 20 7.5 12 125 270 225 105 60 1" 1" 13009085 140 75m6 M20/42 20 7.5 12 125 270 225 105 60 1" 1" 1560

4. Refer to the page D-14 for dimensions shown in these drawings.5. Refer to the page D -28 for the dimension of optional parts.

1. Key and keyways are based on ISO R773-1969 Close keys (JIS B1301-1996 Parallel key in fastening type)2. The oil quantity is approximate. Oil shall be supplied within the range shown on the oil gauge.3. Shaft arrangement RR is equipped with oil gauge. Refer to the page D-28.





9060 440 230 210 125m6 M24/50 32 11 18 185 583 353 230 128 125 470 235 235 125 1239065 484 234 250 140m6 M30/60 36 12 20 225 594 359 235 143 140 480 240 240 145 1439070 509 259 250 145m6 M30/60 36 12 20 225 644 384 260 148 145 530 265 265 145 1439075 562 262 300 160m6 M30/60 40 13 22 275 651 386 265 158 155 530 265 265 150 1489080 582 282 300 165m6 M30/60 40 13 22 275 714 429 285 173 170 570 285 285 165 1639085 585 285 300 175m6 M30/60 45 15 25 270 714 429 285 183 180 570 285 285 175 173

H

L



L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2

Slow Speed Shaft


C - 79



Backstop(Option)


P V D R 2 - -

RLRR

906090659070907590809085

PV

DR

90609085

2PARAMAX

VerticalSplit

Right AngleDouble

Reduction

Unit: mm


906090659070907590809085

Nomenclature

(blank)T

K



(blank)F


FanSizeShaft

Arrangement

Low Speed ShaftType



SizeNominal Reduction Ratio

6.3-9 10-18 8-11.2 12.5-22.49060 25 259065 32 329070 35 419075 47 549080 46 559085 58 68

Approx. Oil Qty.

Unit: liters

C - 80

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

E2 E3

NP

H

PP

HL

RL2

AB

N

CN

1 N2

C1

RC1

MM

OE1

RC24- JK K

LDG GY

RI FAFB

FA

FDFC

Z2

W2

Y2 X2

S

Unit: mm

High Speed ShaftWith FanRefer to the page D-21 for details.

Size A B C C1 D E1 E2 E3 G H RI J K L M N N1 N2 NP O P Y

9030 656 200 576 264 175 320 220 160 25 50 105 24 120 590 85 208 22 9 100 270 132.5 3659035 687 219 607 295 194 370 245 185 25 50 120 24 120 640 100 208 22 9 100 320 132.5 3969040 716 235 636 306 205 400 260 200 30 60 120 28 150 685 100 235 15 2 117 340 157.5 4209045 755 256 675 345 226 440 266 220 30 60 140 28 150 745 120 239 17.5 2 117 380 157.5 4599050 808 255 728 358 225 420 270 210 30 60 140 28 150 775 110 255 23 7 117 360 172.5 4909055 847 286 767 397 256 490 305 245 30 60 155 28 150 845 135 255 23 7 117 430 172.5 529


RC1 RC2 Wt.kg

OilQty.

LR S W2/DepthKey


9030 80 28k6 M10/22 8 4 7 70 150 125 50 30 3/4" 3/4" 210 99035 80 28k6 M10/22 8 4 7 70 150 125 50 30 3/4" 3/4" 230 129040 80 30k6 M10/22 8 4 7 70 170 125 50 30 1" 1" 305 189045 80 30k6 M10/22 8 4 7 70 170 125 50 30 1" 1" 365 229050 80 35k6 M12/28 10 5 8 70 190 140 50 22 1" 1" 445 219055 80 35k6 M12/28 10 5 8 70 190 140 50 22 1" 1" 505 30

4. Refer to the page D -25 for the dimension of optional parts.1. Key and keyways are based on ISO R773-1969 Close keys (JIS B1301-1996 Parallel key in fastening type)2. The oil quantity is approximate. Oil shall be supplied within the range shown on the oil gauge.3. Refer to the page D-12 for dimensions shown in these drawings.

DIMENSIONS Right Angle Shaft Triple Reduction Vertical Mounting 9030 9055

H

L



L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2

Slow Speed Shaft


C - 81



Backstop(Option)


P V A R 3 - -

RLRR

903090359040904590509055

PV

AR

90309055

3PARAMAX

VerticalMonoblock

Right AngleTriple

Reduction

Unit: mm




9030 330 160 170 80m6 M20/42 22 9 14 150 393 233 160 83 80 330 165 165 75 759035 330 160 170 90m6 M20/42 25 9 14 150 403 243 160 88 85 330 165 165 85 859040 349 179 170 95m6 M24/50 25 9 14 150 448 268 180 98 95 360 180 180 90 909045 391 181 210 105m6 M24/50 28 10 16 190 463 283 180 108 105 370 185 185 105 1059050 411 201 210 110m6 M24/50 28 10 16 190 503 303 200 108 105 410 205 205 105 1059055 411 201 210 120m6 M24/50 32 11 18 185 528 323 205 123 120 410 205 205 115 115


903090359040904590509055

Nomenclature

(blank)T

K



(blank)F


FanSizeShaft

Arrangement

Low Speed ShaftType



C - 82

Size A B C C1 D E1 E2 E3 G H RI J K L M N N1 NP O P P1 Y9060 939 299 829 414 251 530 282 265 35 35 160 35 180 885 140 277.5 35 117 460 190 213 5649065 985 338 875 460 290 600 317 300 35 35 175 35 180 970 175 277.5 38 117 530 190 213 6109070 1027 336 917 482 283 600 317 300 40 40 175 42 215 1020 155 304 38 117 520 215 233 6579075 1080 383 970 535 330 670 352 335 40 52 190 42 220 1120 195 304 40 117 590 215 233 7109080 1176 378 1036 556 325 670 352 335 40 52 190 42 220 1155 170 322.5 45 117 590 230 268 7509085 1232 422 1092 612 369 750 392 375 40 52 215 42 220 1255 210 322.5 40 117 670 230 268 806


RC1 RC2 Wt.kg

OilQty.

LR S W2/DepthKey


9060 110 45k6 M16/36 14 5.5 9 95 220 160 80 52 1" 1" 660 289065 110 45k6 M16/36 14 5.5 9 95 220 160 80 52 1" 1" 785 359070 110 50k6 M16/36 14 5.5 9 95 245 160 80 52 1" 1" 940 469075 110 50k6 M16/36 14 5.5 9 95 245 160 80 52 1" 1" 1190 599080 140 60m6 M20/42 18 7 11 125 270 160 105 65 1" 1" 1350 609085 140 60m6 M20/42 18 7 11 125 270 160 105 65 1" 1" 1610 80

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

4- J

RC1

MM

OE1

K K

LDG GYRC2

RI

C1

H

C

P1

PP

N1

RL2

AB

N

NP

E2 E3

FAFB

FA

FDFC

Z2

W2

Y2 X2

S

Unit: mm









9060 440 230 210 125m6 M24/50 32 11 18 185 583 353 230 128 125 470 235 235 125 1239065 484 234 250 140m6 M30/60 36 12 20 225 594 359 235 143 140 480 240 240 145 1439070 509 259 250 145m6 M30/60 36 12 20 225 644 384 260 148 145 530 265 265 145 1439075 562 262 300 160m6 M30/60 40 13 22 275 651 386 265 158 155 530 265 265 150 1489080 582 282 300 165m6 M30/60 40 13 22 275 714 429 285 173 170 570 285 285 165 1639085 585 285 300 175m6 M30/60 45 15 25 270 714 429 285 183 180 570 285 285 175 173


906090659070907590809085

H

L



L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2

Slow Speed Shaft


C - 83



Backstop(Option)


P V D R 3 - -

RLRR

906090659070907590809085

PV

DR

90609085

3PARAMAX

VerticalSplit

Right AngleTriple

Reduction

Unit: mm

Nomenclature

(blank)T

K



(blank)F


FanSizeShaft

Arrangement

Low Speed ShaftType





Size A B C C1 D E1 E2 E3 E4 G H RI J K L M N N1 NP O P P1 Y

9090 1320 410 1180 640 345 750 449 421 430 60 50 215 42 180 1440 130 388 50 137 630 285 363 9759095 1350 440 1210 670 375 800 474 446 430 60 50 235 42 200 1500 140 388 50 137 680 285 363 10059100 1474 450 1334 375 850 471 471 500 70 55 235 48 200 1610 150 60 710 325 411 10959105 1508 485 1368 410 900 496 496 500 70 55 260 48 220 1680 160 60 760 325 411 11309110 1684 500 1514 420 950 521 521 500 75 60 265 56 220 1810 170 55 800 355 446 12409115 1733 550 1563 470 1000 546 546 500 75 60 280 56 250 1910 180 55 850 355 446 1290


RC1 RC2 Wt.kg

OilQty.

LR S W2/DepthKey


9090 140 65m6 M20/42 18 7 11 125 340 200 105 65 1" 1 1/2" 2170 1209095 140 65m6 M20/42 18 7 11 125 340 200 105 65 1" 1 1/2" 2430 1459100 140 75m6 M20/42 20 7.5 12 125 380 225 105 60 1" 1 1/2" 2970 1709105 140 75m6 M20/42 20 7.5 12 125 380 225 105 60 1" 1 1/2" 3450 2109110 170 85m6 M20/42 22 9 14 140 410 225 135 90 1" 1 1/2" 4150 2309115 170 85m6 M20/42 22 9 14 140 410 225 135 90 1" 1 1/2" 4670 290

C - 84

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

4- J

RI

MM

OE1

KG D Y

KG

L

E4

C1

RC1

N1

NP

PP

P1

H N

ABC R

L2

RC2E2

(9090,9095) E3

E2

FBFA

FCFD

FA

Z2

W2

Y2 X2

S

Unit: mm

High Speed ShaftWith FanRefer to the page D-21 for details.

9100 ~ 9115


PV

DR

90909115

3



TU2 T2 U2 V2 V3X1 Y1 Z1 L1

9090 650 350 300 180m6 M30/60 45 15 25 270 844 494 350 193 1909095 700 350 350 190m6 M30/60 45 15 25 320 859 509 350 203 2009100 740 390 350 200m6 M30/60 45 15 25 320 934 544 390 213 2109105 740 390 350 220m6 M30/60 50 17 28 320 949 559 390 223 2209110 770 420 350 220m6 M30/60 50 17 28 320 1030 610 420 243 2409115 830 420 410 240m6 M30/60 56 20 32 375 1065 645 420 253 250


909090959100910591109115

H

L


L1U1

TU1T1

V1

W1

Z1Y1

X1

TU2U2 T2

V3V2

Slow Speed Shaft



C - 85



Backstop(Option)


PARAMAXVertical

SplitRight Angle

Triple Reduction

P V D R 3 - -

RLRR

909090959100910591109115

Unit: mm

Nomenclature

(blank)T


(Shrink Disk type)

(blank)F


FanSizeShaft

Arrangement

Low Speed ShaftType



C - 86

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

E2 E3

C

NP

HL

HP

P

ABRL2

N

N1

C1

RC1

M1

M1

OE1

RC2

4- JK K

LDG GY

M2

RI

Z2

W2Y

2 X2

S

Unit: mm

High Speed Shaft

Size A B C C1 D E1 E2 E3 G H RI J K L M1 M2 N N1 NP O P Y

9040 790 235 710 398 205 400 260 200 30 60 120 28 150 759 100 70 228.5 15 100 340 157.5 494

9045 829 256 749 437 226 440 277 220 30 60 140 28 150 819 120 90 228.5 17.5 100 380 157.5 533

9050 859 255 779 467 225 420 270 210 30 60 140 28 150 848 110 83 248.5 23 100 360 172.5 563

9055 898 286 818 506 256 490 305 245 30 60 155 28 150 918 135 118 248.5 23 100 430 172.5 602


RC1 RC2 Wt.kg

OilQty.

LR S W2/DepthKey

X2 Y2 Z2 L29040 80 28k6 M10/22 8 4 7 70 1" 1" 325 189045 80 28k6 M10/22 8 4 7 70 1" 1" 395 229050 80 28k6 M10/22 8 4 7 70 1" 1" 460 249055 80 28k6 M10/22 8 4 7 70 1" 1" 520 34



DIMENSIONS Right Angle Shaft Quadruple Reduction Vertical Mounting 9040 9055

H

L

Standard Shaft Arrangement ConfigurationLR LL


L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2

Slow Speed Shaft


C - 87



Backstop(Option)


P V A R 4 - -

LRLL

9040904590509055

PV

AR

90409055

4PARAMAX

VerticalMonoblock


Unit: mm




9040 349 179 170 95m6 M24/50 25 9 14 150 448 268 180 98 95 360 180 180 90 909045 391 181 210 105m6 M24/50 28 10 16 190 463 283 180 108 105 370 185 185 105 1059050 411 201 210 110m6 M24/50 28 10 16 190 503 303 200 108 105 410 205 205 105 1059055 411 201 210 120m6 M24/50 32 11 18 185 528 323 205 123 120 410 205 205 115 115


9040904590509055

Nomenclature

(blank)T

K



SizeShaft

Arrangement

Low Speed ShaftType



Size A B C C1 D E1 E2 E3 G H RI J K L M1 M2 N N1 NP O P P1 Y

9060 950 299 870 540 251 530 282 265 35 35 160 35 180 970 140 118 277.5 35 117 460 190 203 6499065 996 338 916 586 290 600 317 300 35 35 175 35 180 1055 175 153 277.5 38 117 530 190 203 6959070 1080 336 1000 630 283 600 317 300 40 40 175 42 215 1115 155 128 304 38 117 520 215 233 7529075 1133 383 1053 683 330 670 352 335 40 52 190 42 220 1215 195 163 304 40 117 590 215 233 8059080 1250 378 1140 725 325 670 352 335 40 52 190 42 220 1275 170 140 322.5 45 117 590 230 263 8709085 1306 422 1196 781 369 750 392 375 40 52 215 42 220 1375 210 180 322.5 40 117 670 230 263 926


RC1 RC2 Wt.kg

OilQty.

LR S W2/DepthKey

X2 Y2 Z2 L29060 80 30k6 M10/22 8 4 7 70 1" 1" 670 369065 80 30k6 M10/22 8 4 7 70 1" 1" 825 459070 80 35k6 M12/28 10 5 8 70 1" 1" 960 549075 80 35k6 M12/28 10 5 8 70 1" 1" 1180 689080 110 45k6 M16/36 14 5.5 9 95 1" 1" 1390 699085 110 45k6 M16/36 14 5.5 9 95 1" 1" 1650 94

C - 88

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

N

L2RC

AB

PP H

NP

N1

P1

E3E2

4- J

C1

M1

M1

OE1

KG D Y G

K

L

RI

RC1

RC2

M2

Z2

W2Y

2 X2

S

Unit: mm

High Speed Shaft







9060 440 230 210 125m6 M24/50 32 11 18 185 583 353 230 128 125 470 235 235 125 1239065 484 234 250 140m6 M30/60 36 12 20 225 594 359 235 143 140 480 240 240 145 1439070 509 259 250 145m6 M30/60 36 12 20 225 644 384 260 148 145 530 265 265 145 1439075 562 262 300 160m6 M30/60 40 13 22 275 651 386 265 158 155 530 265 265 150 1489080 582 282 300 165m6 M30/60 40 13 22 275 714 429 285 173 170 570 285 285 165 1639085 585 285 300 175m6 M30/60 45 15 25 270 714 429 285 183 180 570 285 285 175 173

H

L



L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2

Slow Speed Shaft


C - 89



Backstop(Option)


P V D R 4 - -

LRLL

906090659070907590809085

PV

DR

90609085

4PARAMAX

VerticalSplit


Unit: mm


906090659070907590809085

Nomenclature

(blank)T

K



SizeShaft

Arrangement

Low Speed ShaftType



C - 90

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

NP

RC2

N1

PP

P1

CA

RL2

B

H N

4- J

C1

RC1

MM

OE1

KG D

RI

YK

GL

E4

E2 E3

Z2

W2Y

2 X2

S

Unit: mm

High Speed Shaft

Size A B C C1 D E1 E2 E3 E4 G H RI J K L M N N1 NP O P P1 Y

9090 1382 410 1272 837 345 750 449 421 430 60 50 215 42 180 1440 130 388 50 137 630 285 354 9759095 1412 440 1302 867 375 800 474 446 430 60 50 235 42 200 1500 140 388 50 137 680 285 354 10059100 1570 450 1430 950 375 850 499 471 500 70 55 235 48 200 1610 150 428 60 137 710 325 399 10959105 1604 485 1464 984 410 900 524 496 500 70 55 260 48 220 1680 160 428 60 137 760 325 399 11309110 1670 500 1530 1050 420 950 559 521 500 75 60 265 56 220 1810 170 458 55 137 800 355 429 12409115 1719 550 1579 1099 470 1000 584 546 500 75 60 280 56 250 1910 180 458 55 137 850 355 429 1290


RC1 RC2 Wt.kg

OilQty.

LR S W2/DepthKey

X2 Y2 Z2 L29090 110 50k6 M16/36 14 5.5 9 95 1" 1 1/2" 2170 1209095 110 50k6 M16/36 14 5.5 9 95 1" 1 1/2" 2430 1559100 140 60m6 M20/42 18 7 11 125 1" 1 1/2" 2970 1809105 140 60m6 M20/42 18 7 11 125 1" 1 1/2" 3450 2209110 140 60m6 M20/42 18 7 11 125 1" 1 1/2" 4100 2509115 140 60m6 M20/42 18 7 11 125 1" 1 1/2" 4620 315




H

L


L1U1

TU1T1

V1

W1

Z1Y1

X1

TU2U2 T2

V3V2

Slow Speed Shaft



C - 91



Backstop(Option)


P V D R 4 - -

LRLL

909090959100910591109115

PV

DR

90909115

4PARAMAX

VerticalSplit


Unit: mm



TU2 T2 U2 V2 V3X1 Y1 Z1 L1

9090 650 350 300 180m6 M30/60 45 15 25 270 494 350 193 1909095 700 350 350 190m6 M30/60 45 15 25 320 859 509 350 203 2009100 740 390 350 200m6 M30/60 45 15 25 320 934 544 390 213 2109105 740 390 350 220m6 M30/60 50 17 28 320 949 559 390 223 2209110 770 420 350 220m6 M30/60 50 17 28 320 1030 610 420 243 2409115 830 420 410 240m6 M30/60 56 20 32 375 1065 645 420 253 250


909090959100910591109115

Nomenclature

(blank)T


(Shrink Disk type)

SizeShaft

Arrangement

Low Speed ShaftType



C - 92

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

Size A B C D E E1 F G H1 H2 J1 J2 K1 K2 K3 L P Y1 Y2 Y3 Y4

9015 507 160 427 90 135 270 298 70 50 22 15 15 70 35 95 440 205 170 180 170 3009025 545 175 465 95 155 310 338 80 55 25 19 19 75 40 110 505 235 195 210 195 3459030 645 200 535 110 160 320 348 90 60 28 24 24 85 50 120 590 265 215 200 215 4109035 676 219 566 129 185 370 398 90 60 28 24 24 100 50 120 640 265 215 250 215 4609040 705 235 595 120 200 400 430 115 75 30 28 28 100 60 150 685 315 255 260 255 4559045 744 256 634 141 220 440 470 115 75 30 28 28 120 60 150 745 315 255 300 255 5159050 755 255 645 138.5 210 420 450 116.5 75 32 28 28 110 60 150 775 345 285 280 285 5429055 794 286 684 171 245 490 520 115 75 32 28 28 135 60 150 845 345 285 350 285 615


RC1 RC2 Wt.kg

OilQty.

LR S W2/DepthKey



BA

CR L2

Y1

PK2 K2

FA

FB

FA

FDFC

RC1

Y3

E

H2

K3

DG

Y4

GL

K34-

J2

F

HL

RC2

K1

E1Y2

K14- J1

H1

Z2

W2

Y2 X2

S

Unit: mm

High Speed Shaft With FanRefer to the page D-20 for details.



DIMENSIONS Right Angle Shaft Double Reduction Upright Mounting 9015 9055

RL RR RB LR LL LB


L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2

Slow Speed Shaft



H

L

C - 93



Backstop(Option)



90159025903090359040904590509055





P W A R 2 - -

RLRRRBLRLLLB

90159025903090359040904590509055

PW

AR

90159055

2PARAMAX

UprightMonoblock

Right AngleDouble

Reduction

Unit: mm

Nomenclature

(blank)T

K



(blank)F


FanSizeShaft

Arrangement

Low Speed ShaftType



C - 94

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles


9060 865 299 725 151 265 530 577 135 35 35 180 885 310 380 6159065 911 338 771 190 300 600 647 135 35 35 180 975 310 380 7009070 965 336 825 163 300 600 647 160 40 42 215 1020 350 430 7009075 1018 383 878 210 335 670 717 160 52 42 220 1120 350 430 8009080 1080 378 940 205 335 670 717 160 52 42 220 1155 380 460 8359085 1136 422 996 249 375 750 797 160 52 42 220 1255 380 460 935


RC1 RC2 Wt.kg

OilQty.

LR S W2/DepthKey


9060 140 60m6 M20/42 18 7 11 125 220 160 105 65 1" 1" 600 449065 140 60m6 M20/42 18 7 11 125 220 160 105 65 1" 1" 725 569070 140 65m6 M20/42 18 7 11 125 245 200 105 65 1" 1" 920 659075 140 65m6 M20/42 18 7 11 125 245 200 105 65 1" 1" 1170 879080 140 75m6 M20/42 20 7.5 12 125 270 225 105 60 1" 1" 1300 909085 140 75m6 M20/42 20 7.5 12 125 270 225 105 60 1" 1" 1560 126

BA

CR L2

HL

EH

O P

RC1

GKD

YGK4- J

FE1

L

FA

FB

FA

FDFC

Z2

W2

Y2 X2

S

RC2

Unit: mm

High Speed Shaft With FanRefer to the page D-20 for details.




RL RR RB LR LL LB


L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2

Slow Speed Shaft



H

L

C - 95



Backstop(Option)





9060 440 230 210 125m6 M24/50 32 11 18 185 583 353 230 128 125 470 235 235 125 1239065 484 234 250 140m6 M30/60 36 12 20 225 594 359 235 143 140 480 240 240 145 1439070 509 259 250 145m6 M30/60 36 12 20 225 644 384 260 148 145 530 265 265 145 1439075 562 262 300 160m6 M30/60 40 13 22 275 651 386 265 158 155 530 265 265 150 1489080 582 282 300 165m6 M30/60 40 13 22 275 714 429 285 173 170 570 285 285 165 1639085 585 285 300 175m6 M30/60 45 15 25 270 714 429 285 183 180 570 285 285 175 173


906090659070907590809085

P W D R 2 W - -

RLRRRBLRLLLB

906090659070907590809085

PW

DR

90609085

2PARAMAX

UprightSplit

Right AngleDouble

Reduction

WWall

Mount

Unit: mm

Nomenclature

(blank)T

K



(blank)F


FanSizeShaft

Arrangement

Low Speed ShaftType



C - 96

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

BA

CR L2

Y1

PK2 K2

FA

FB

FA

FD

FC

K3

DG

Y4

GL

K34-

J2

F

HL

K1

E1Y2

K14- J1

H1

RC1

Y3

E

H2

Z2

W2

Y2 X2

S

RC2

Unit: mm




9030 656 200 576 110 160 320 348 90 60 28 24 24 85 50 120 590 265 215 200 215 410

9035 687 219 607 129 185 370 398 90 60 28 24 24 100 50 120 640 265 215 250 215 460

9040 716 235 636 120 200 400 430 115 75 30 28 28 100 60 150 685 315 255 260 255 455

9045 755 256 675 141 220 440 470 115 75 30 28 28 120 60 150 745 315 255 300 255 515

9050 808 255 728 138.5 210 420 450 116.5 75 32 28 28 110 60 150 775 345 285 280 285 542

9055 847 286 797 171 245 490 520 115 75 32 28 28 135 60 150 845 345 285 350 285 615


RC1 RC2 Wt.kg

OilQty.

LR S W2/DepthKey


9030 80 28k6 M10/22 8 4 7 70 150 125 50 30 3/4" 3/4" 210 169035 80 28k6 M10/22 8 4 7 70 150 125 50 30 3/4" 3/4" 230 219040 80 30k6 M10/22 8 4 7 70 170 125 50 30 1" 1" 305 299045 80 30k6 M10/22 8 4 7 70 170 125 50 30 1" 1" 365 369050 80 35k6 M12/28 10 5 8 70 190 140 50 22 1" 1" 445 359055 80 35k6 M12/28 10 5 8 70 190 140 50 22 1" 1" 505 46



DIMENSIONS Right Angle Shaft Triple Reduction Upright Mounting 9030 9055

RL RR RB LR LL LB


L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2

Slow Speed Shaft



H

L

C - 97



Backstop(Option)


P W A R 3 - - Fan

RLRRRBLRLLLB

903090359040904590509055

PW

AR

90309055

3PARAMAX

UprightMonoblock

Right AngleTriple

Reduction

Unit: mm




9030 330 160 170 80m6 M20/42 22 9 14 150 393 233 160 83 80 330 165 165 75 759035 330 160 170 90m6 M20/42 25 9 14 150 403 243 160 88 85 330 165 165 85 859040 349 179 170 95m6 M24/50 25 9 14 150 448 268 180 98 95 360 180 180 90 909045 391 181 210 105m6 M24/50 28 10 16 190 463 283 180 108 105 370 185 185 105 1059050 411 201 210 110m6 M24/50 28 10 16 190 503 303 200 108 105 410 205 205 105 1059055 411 201 210 120m6 M24/50 32 11 18 185 528 323 205 123 120 410 205 205 115 115


903090359040904590509055

Nomenclature

(blank)T

K



(blank)F


SizeShaft

Arrangement

Low Speed ShaftType



C - 98

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

BA

CR L2

EH

O P

RC1

GKD

YGK4-

J

FE1

LX

FA

FB

FA

FDFCZ2

W2

Y2 X2

S

RC2

Unit: mm

High Speed Shaft

With FanRefer to the page D-21 for details.

Size A B C D E E1 F G H J K L O P X Y

9060 939 299 829 151 265 530 577 135 35 35 180 885 310 380 131 6159065 985 338 875 190 300 600 647 135 35 35 180 975 310 380 131 7009070 1027 336 917 163 300 600 647 160 40 42 215 1020 350 430 138 7009075 1080 383 970 210 335 670 717 160 52 42 220 1120 350 430 138 8009080 1176 378 1036 205 335 670 717 160 52 42 220 1155 380 460 165 8359085 1232 422 1092 249 375 750 797 160 52 42 220 1255 380 460 165 935


RC1 RC2 Wt.kg

OilQty.

LR S W2/DepthKey


9060 110 45k6 M16/36 14 5.5 9 95 220 160 80 52 1" 1" 660 569065 110 45k6 M16/36 14 5.5 9 95 220 160 80 52 1" 1" 785 659070 110 50k6 M16/36 14 5.5 9 95 245 160 80 52 1" 1" 940 839075 110 50k6 M16/36 14 5.5 9 95 245 160 80 52 1" 1" 1190 1009080 140 60m6 M20/42 18 7 11 125 270 160 105 65 1" 1" 1350 1159085 140 60m6 M20/42 18 7 11 125 270 160 105 65 1" 1" 1610 144




RL RR RB LR LL LB


L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2

Slow Speed Shaft



H

L

C - 99



Backstop(Option)


P W D R 3 W - -

RLRRRBLRLLLB

906090659070907590809085

PW

DR

90609085

3PARAMAX

UprightSplit

Right AngleTriple

Reduction

WWall

Mount

Unit: mm




9060 440 230 210 125m6 M24/50 32 11 18 185 583 353 230 128 125 470 235 235 125 1239065 484 234 250 140m6 M30/60 36 12 20 225 594 359 235 143 140 480 240 240 145 1439070 509 259 250 145m6 M30/60 36 12 20 225 644 384 260 148 145 530 265 265 145 1439075 562 262 300 160m6 M30/60 40 13 22 275 651 386 265 158 155 530 265 265 150 1489080 582 282 300 165m6 M30/60 40 13 22 275 714 429 285 173 170 570 285 285 165 1639085 585 285 300 175m6 M30/60 45 15 25 270 714 429 285 183 180 570 285 285 175 173


906090659070907590809085

Nomenclature

(blank)T

K



(blank)F


SizeShaft

Arrangement

Low Speed ShaftType



C - 100

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

AB

CR L2

Y1

PK2 K2

HL

DG

LG4-

J2K

3K

3

Y4

H1

Y2E1F

K1 K14- J1

RC1

EH2

Y3

Z2W2

Y2 X2

S

RC2

Unit: mm

High Speed Shaft


9040 790 235 710 120 200 400 430 115 75 30 28 28 100 60 150 759 315 255 260 255 529

9045 829 256 749 141 220 440 470 115 75 30 28 28 120 60 150 819 315 255 300 255 589

9050 859 255 779 138.5 210 420 450 116.5 75 32 28 28 110 60 150 848 345 285 280 285 615

9055 898 286 818 171 245 490 520 115 75 32 28 28 135 60 150 918 345 285 350 285 688


RC1 RC2 Wt.kg

OilQty.

LR S W2/DepthKey

X2 Y2 Z2 L29040 80 28k6 M10/22 8 4 7 70 1" 1" 325 359045 80 28k6 M10/22 8 4 7 70 1" 1" 395 439050 80 28k6 M10/22 8 4 7 70 1" 1" 460 469055 80 28k6 M10/22 8 4 7 70 1" 1" 520 59



DIMENSIONS Right Angle Shaft Quadruple Reduction Upright Mounting 9040 9055

RL RR RB LR LL LB


L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2

Slow Speed Shaft



H

L

C - 101



Backstop(Option)


P W A R 4 - -

RLRRRBLRLLLB

9040904590509055

PW

AR

90409055

4PARAMAX

UprightMonoblock





9040 349 179 170 95m6 M24/50 25 9 14 150 448 268 180 98 95 360 180 180 90 909045 391 181 210 105m6 M24/50 28 10 16 190 463 283 180 108 105 370 185 185 105 1059050 411 201 210 110m6 M24/50 28 10 16 190 503 303 200 108 105 410 205 205 105 1059055 411 201 210 120m6 M24/50 32 11 18 185 528 323 205 123 120 410 205 205 115 115


9040904590509055

Unit: mm

Nomenclature

(blank)T

K



SizeShaft

Arrangement

Low Speed ShaftType



C - 102

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

EH

O P

RC1

KD

GY

GL

K4-

J

FE1

X

AB

CR L2

Z2

W2

Y2 X2

S

RC2

Unit: mm

High Speed Shaft


9060 950 299 870 151 265 530 577 135 35 35 180 970 310 380 79 7009065 991 338 916 190 300 600 648 135 35 35 180 1055 310 380 79 7859070 1080 336 1000 163 300 600 647 160 40 42 215 1115 350 430 70 7959075 1133 383 1053 210 335 670 717 160 52 42 220 1215 350 430 70 8959080 1250 378 1140 205 335 670 717 160 52 42 220 1275 380 460 101 9559085 1306 422 1196 249 375 750 797 160 52 42 220 1375 380 460 101 1055


RC1 RC2 Wt.kg

OilQty.

LR S W2/DepthKey

X2 Y2 Z2 L29060 80 30k6 M10/22 8 4 7 70 1" 1" 670 689065 80 30k6 M10/22 8 4 7 70 1" 1" 825 859070 80 35k6 M12/28 10 5 8 70 1" 1" 960 1079075 80 35k6 M12/28 10 5 8 70 1" 1" 1180 1229080 110 45k6 M16/36 14 5.5 9 95 1" 1" 1390 1289085 110 45k6 M16/36 14 5.5 9 95 1" 1" 1650 174




RL RR RB LR LL LB


L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2

Slow Speed Shaft



H

L

C - 103



Backstop(Option)


P W D R 4 W - -

RLRRRBLRLLLB

906090659070907590809085

PW

DR

90609085

4PARAMAX

UprightSplit


WWall

Mount

Unit: mm




9060 440 230 210 125m6 M24/50 32 11 18 185 583 353 230 128 125 470 235 235 125 1239065 484 234 250 140m6 M30/60 36 12 20 225 594 359 235 143 140 480 240 240 145 1439070 509 259 250 145m6 M30/60 36 12 20 225 644 384 260 148 145 530 265 265 145 1439075 562 262 300 160m6 M30/60 40 13 22 275 651 386 265 158 155 530 265 265 150 1489080 582 282 300 165m6 M30/60 40 13 22 275 714 429 285 173 170 570 285 285 165 1639085 585 285 300 175m6 M30/60 45 15 25 270 714 429 285 183 180 570 285 285 175 173


906090659070907590809085

Nomenclature

(blank)T

K



SizeShaft

Arrangement

Low Speed ShaftType



C - 104

Selection Tables C- 106Allowable Loads C- 136Dimension Sheets C- 144

,Reducer: Parallel Shaft Horizontal Mounting>

<Reducer: Parallel Shaft Vertical Mounting>

<Reducer: Parallel Shaft Upright Mounting>

C

Reducer: Parallel shaft

NominalReduction

Ratio

H.SpeedShaft Speed

r/min

L.SpeedShaft Speed

r/min

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090

6.3


286238190

766451

12210282

179149120

257223187

350305256

603530448

900792677

143012501050

195017101450

1000900750

159143119

433932

686251

1009176

162148125

222203174

388355302

588538462

884798668

12401120943

7.1


254211169

625242

1008367

161135108

241201162

349293235

559469377

900757610

13501130914

183016101320

1000900750

141127106

3531

26.5

565042

908268

136122102

197178149

316285238

511461386

766691579

1100999836

8

Exact Reduction Ratio 7.889 7.616 8.118 7.869 7.778 7.691 7.956 8.062 7.875 7.759 8.033 7.733 8.167 7.835 8.111180015001200

225188150

615141

998367

14011794

187156126

219190154

257223187

311271227

350305256

517455378

603530448

781687571

900792677

12301030836

143012501070

166014501200

1000900750

12511394

3431

25.9

565042

787159

1059579

12911697

162148127

195176147

222203174

317286239

388355304

478432361

588538462

700632529

932841704

1020923773

DimensionTables

Horizontal C-144 C-144 C-144 C-144 C-144 C-144 C-144 C-144 C-146 C-146 C-146 C-146 C-146 C-146 C-148Vertical C-170 C-170 C-170 C-170 C-170 C-170 C-170 C-170 C-172 C-172 C-172 C-172 C-172 C-172 C-174Upright C-188 C-188 C-188 C-188 C-188 C-188 C-188 C-188 C-190 C-190 C-190 C-190 C-190 C-190

NominalReduction

Ratio

H.SpeedShaft Speed

r/min

Number of Cooling

Fans

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090


Type

6.3▼

8

1800 -1

40111

51132

57143

73193

88216

108265

103250

127308

147415

174491

184479

225531

214510

263709

3401048

1500 -1

3997

50117

58130

75176

89195

110240

106228

131282

151378

180452

192446

238500

232492

284679

360986

1200 -1

3883

49101

58115

75156

88171

110213

106202

131251

151337

182405

196404

245456

240452

296629

370901

1000 -1

3671

4786

56100

74136

86148

108185

104176

130220

149294

180355

195356

245405

241402

299562

371799

900 -1

3566

4681

5594

73128

85139

107176

103166

128208

147277

178336

193337

243385

240382

298537

369761

750 -1

3357

4470

5382

70113

81122

103154

99146

124183

142245

173298

188300

239343

235342

293481

362680

Double Reduction

Vertical Type

6.3▼

8

1800 - 39 49 54 69 84 102 98 120 135 158 163 200 182 229 220

1500 - 38 49 56 72 86 106 102 125 142 168 182 219 210 258 277

1200 - 37 48 56 73 86 107 103 128 145 174 194 231 231 278 317

1000 - 36 46 55 72 85 106 102 127 144 174 195 235 239 285 330

900 - 35 45 54 71 83 105 101 126 143 173 193 235 240 286 334

750 - 33 43 52 69 80 101 98 122 139 169 188 232 235 284 336

Double Reduction

Upright Type

6.3▼

8

1800 -1

3289

40106

45115

59154

70173

86212

82200

102246

118332

139393

147383

180425

171408

211567

1500 -1

3178

4094

46104

60141

71156

88192

85182

105225

121303

144361

154357

190400

186394

227543

1200 -1

3066

3981

4692

60125

71137

88170

85162

105201

121269

146324

157323

196365

192361

237503

1000 -1

2956

3869

4580

59109

69118

86148

83141

104176

119235

144284

156285

196324

193321

239450

900 -1

2853

3765

4475

58103

68111

86141

82133

102166

117222

142269

154270

195308

192306

238429

750 -1

2645

3556

4366

5690

6597

82123

79117

99147

114196

138238

151240

191275

188273

235385

SELECTION Parallel Shaft Double Reduction Nominal Reduction Ratio 6.3 8



C - 106

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles


r/min

H.SpeedShaft Speed

r/min

NominalReduction


6.3

2970※

26102160

3900※

3440※

2940

286238190

180015001200

181016301370

255023402000

159143119

1000900750


7.1

195017101450

2790※

23801920

2970※

26102230

3460※

3050※

2600

3910※

3440※

2940

254211169

180015001200

12401140978

161014501220

193017601480

224020201690

255023402000

141127106

1000900750


8

183016101360

2480※

21201710

2790※

24502080

3200※

2820※

2350

3460※

3050※

2610

225188150

180015001200

11701060891

143012901080

174015701310

202018501580

226020701780

12511394

1000900750

C-148 C-148 C-148 C-148 C-148 Horizontal DimensionTablesC-174 C-174 C-174 C-174 C-174 Vertical

Upright


Fans

H.SpeedShaft Speed

r/min

NominalReduction

Ratio9095 9100 9105 9110 9115 9118 9121 9126 9128 9131 9136376

1113415

1179471

1291504

1337575

1471-1 1800


Type

6.3▼

8

4011056

4541148

5091241

5671336

6331443

-1 1500

415970

4711056

5331153

6101277

6731362

-1 1200

417864

474942

5391034

6211152

6871231

-1 1000

415823

472898

538988

6211103

6891182

-1 900

408737

465805

532889

616995

6851069

-1 750

256 221 280 188 258 - 1800Double

ReductionVertical

Type

6.3▼

8

311 311 367 339 407 - 1500

351 382 432 452 515 - 1200

369 412 463 507 567 - 1000

375 419 474 529 587 - 900

378 425 484 549 608 - 750

-1 1800

Double Reduction

Upright Type

6.3▼

8

-1 1500-1 1200-1 1000-1 900-1 750


C - 107

PN = P750 X 750N

1.000.850.700.55

1.000.870.730.60

20304050












AmbientTemperature

NominalReduction

Ratio

H.SpeedShaft Speed

r/min

L.SpeedShaft Speed

r/min

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090

9


200167133

494133

816855

12610585

170142114

188158127

253212170

286239192

350305246

443371298

583489393

708593477

900792647

1070900725

14101180956

156013401080

1000900750

111100

83

28.025.321.1

464134

716453

968672

1069580

142128107

161145121

206186155

250225188

329297249

400361302

542489409

607548458

801723605

907818685

10


180150120

474032

786552

1159677

14612298

188158127

219190159

259226184

311271227

452382307

517455384

689593477

781687588

1020861693

12301080881

13801180964

1000900750

1009075

26.924.220.2

443933

645848

827462

1069580

136123103

154139116

197180155

257232194

333304255

399360301

505456381

580524438

738666558

807728610

11.2


161134107

3932

26.2

645343

1038669

13311189

154129104

198166133

225188151

299250201

360301242

462387311

592495399

751629507

891746600

1120941758

12601060855

1000900750

898067

21.919.716.5

3632

27.3

585243

756756

877865

11110084

12711495

168152127

202183153

260235196

334301252

424383320

503453379

635573479

716646540

DimensionTables


NominalReduction

Ratio

H.SpeedShaft Speed

r/min

Number of Cooling

Fans

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090


Type

9▼

11.2

1800 -1

3597

46119

53134

67175

81199

100245

99240

124300

141397

171482

180469

222523

216515

266716

3331024

1500 -1

3484

45104

53120

67158

81177

100218

100215

126271

143358

174437

185431

229481

226479

279669

344942

1200 -1

3271

4389

52105

66138

79154

99192

98188

125239

142315

173385

187385

231431

230433

286607

347844

1000 -1

3160

4176

5190

65119

77132

96165

96163

122207

139273

170336

185337

229378

229382

285536

344741

900 -1

3056

4070

5085

63112

75124

94154

94153

120195

136257

167316

182319

226357

227362

283509

340702

750 -1

2848

3861

4874

6198

72108

90135

90133

116171

131226

162279

177282

220316

222322

276453

331622

Double Reduction

Vertical Type

9▼

11.2

1800 - 35 46 53 64 81 96 98 118 139 158 180 203 216 238 241

1500 - 34 45 53 65 81 97 100 121 143 164 185 221 226 266 284

1200 - 32 43 52 65 79 97 98 122 142 166 187 231 230 285 306

1000 - 31 41 51 63 77 94 96 120 139 165 185 229 229 285 313

900 - 30 40 50 62 75 93 94 118 136 163 182 226 227 283 314

750 - 28 38 48 60 72 89 90 115 131 159 177 220 222 276 311

Double Reduction

Upright Type

9▼

11.2

1800 -1

2878

3696

42107

53140

65159

80196

79192

99240

113317

137386

144375

177419

173412

213573

1500 -1

2768

3684

4396

54126

65141

80174

80172

101217

114287

139349

148345

183385

181383

224535

1200 -1

2657

3471

4284

53110

64123

79153

79150

100191

113252

138308

149308

185345

184346

228485

1000 -1

2548

3361

4172

5295

62106

77132

77130

98166

111219

136268

148270

183302

183305

228429

900 -1

2445

3256

4068

5189

6099

75123

75122

96156

109206

134252

146255

181286

182290

226407

750 -1

2238

3048

3859

4978

5886

72108

72107

93137

105181

130223

142225

176253

177257

221362

SELECTION Parallel Shaft Double Reduction Nominal Reduction Ratio 9 11.2



C - 108

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles


r/min

H.SpeedShaft Speed

r/min

NominalReduction

Ratio9095 9100 9105 9110 9115 9118 9121 9126 9128 9131 91369.000 8.824 9.000 9.248 9.134 Exact Reduction Ratio

9

166014501200

2250※

18901520

2480※

21901820

2840※

2500※

2070

3200※

2820※

2350

200167133

180015001200

1030948813

12701150965

155013901170

174015701310

202018501580

111100

83

1000900750


10

156013701130

2090※

17601410

2330※

20401640

2780※

2400※

1990

2850※

2500※

2090

180150120

180015001200

966872730

11801070897

138012401040

170015601310

179016401390

1009075

1000900750


11.2

13801180981

1860※

15601260

2150※

18501530

2470※

2130※

1720

2780※

2400※

1990

161134107

180015001200

842770651

1050954799

12801150970

144013001090

171015601340

898067

1000900750


Upright


Fans

H.SpeedShaft Speed

r/min

NominalReduction

Ratio9095 9100 9105 9110 9115 9118 9121 9126 9128 9131 9136365

1079423

1200476

1303511

1354578

1480-1 1800


Type

9▼

11.2

374986

4431119

4961210

5441282

6191411

-1 1500

376879

4521015

5041090

5631178

6441302

-1 1200

371770

451897

500960

5651049

6461157

-1 1000

367728

448852

496910

5631000

6421102

-1 900

357644

438759

484809

554896

631985

-1 750

274 279 326 276 338 - 1800Double

ReductionVertical

Type

9▼

11.2

315 344 388 379 441 - 1500

335 384 434 456 518 - 1200

340 400 448 485 554 - 1000

340 404 451 495 566 - 900

337 405 451 502 575 - 750

-1 1800

Double Reduction

Upright Type

9▼

11.2

-1 1500-1 1200-1 1000-1 900-1 750


C - 109

PN = P750 X 750N

1.000.850.700.55

1.000.870.730.60

20304050












AmbientTemperature

NominalReduction

Ratio

H.SpeedShaft Speed

r/min

L.SpeedShaft Speed

r/min

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090

12.5


144120

96

3832

25.8

615141

897560

12010080

14512197

191165133

222185149

259226190

366307246

452398328

547458368

689607504

804673542

1060908731

1110959773

1000900750

807260

21.519.416.2

3431

26.2

504538

676151

817361

11110184

12511294

164148124

206186155

274247207

308278232

422380318

453409342

612552462

647584488

14


129107

86

3126.121.0

504234

816754

1099173

1189979

162136109

183153123

235197158

289242194

375314252

457383308

628526423

696583469

931780628

1010851685

1000900750

716454

17.515.813.2

28.525.721.4

454134

615546

666050

918269

1029277

132119100

162146122

211190159

257232194

354319267

392354296

526474397

573517433

16


1139475

3125.920.8

504233

726048

947863

1169778

152127102

170142114

237198159

281235189

389327263

440368296

565484389

663555446

846709571

920773622

1000900750

635647

17.415.713.1

28.225.421.2

403630

524739

655949

857764

958672

133120100

158142119

220198166

248223187

325293245

373337281

478431360

520469392

DimensionTables


NominalReduction

Ratio

H.SpeedShaft Speed

r/min

Number of Cooling

Fans

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090


Type

12.5▼

16

1800 -1

3085

42111

51130

63167

74182

95233

89214

116281

125353

159448

163425

210495

206489

261701

311959

1500 -1

2972

4195

50113

63148

73159

94205

87188

115248

124311

159399

164380

211444

209442

265635

315862

1200 -1

2760

3980

4896

62129

70135

91176

85162

112214

121268

155345

161332

209389

208390

264561

311757

1000 -1

2650

3767

4681

60110

67115

88151

81138

108183

116230

150296

157286

204336

204339

259488

304656

900 -1

2546

3662

4475

59103

65107

85140

79128

106171

113214

147278

154269

200316

200319

255460

299617

750 -1

2339

3353

4264

5690

6292

81121

75111

101149

108186

141243

147235

192277

193280

247404

288542

Double Reduction

Vertical Type

12.5▼

16

1800 - 31 43 52 63 75 95 90 116 130 159 170 210 216 261 258

1500 - 29 41 51 63 74 95 88 115 127 159 169 211 220 265 274

1200 - 27 39 48 62 71 92 85 112 123 155 165 209 216 264 283

1000 - 26 37 46 60 67 88 82 108 118 150 160 204 210 259 283

900 - 25 36 45 59 65 86 80 106 115 147 156 200 205 255 281

750 - 23 33 42 56 62 81 76 101 109 141 149 192 197 247 274

Double Reduction

Upright Type

12.5▼

16

1800 -1

2468

3489

41104

51133

59145

76186

71171

93225

100283

127359

130340

168396

164391

209561

1500 -1

2358

3376

4090

51119

58127

75164

70151

92198

99249

127319

131304

169355

167354

212508

1200 -1

2248

3164

3877

50103

56108

73141

68129

90171

96215

124276

129266

167311

166312

211449

1000 -1

2040

2954

3765

4888

5492

70121

65110

87147

93184

120237

125229

163269

163271

207390

900 -1

2037

2850

3560

4783

5285

68112

63103

85137

91171

118222

123215

160253

160255

204368

750 -1

1831

2742

3351

4572

4974

6597

6089

81119

86149

113194

118188

154221

154224

197324




C - 110

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles


r/min

H.SpeedShaft Speed

r/min

NominalReduction


12.5

12901110910

1630※

13601100

2020※

1690※

1360

2240※

1920※

1590

2470※

2130※

1770

144120

96

180015001200

762688576

922832696

11401030864

136012401040

152013701150

807260

1000900750


14

1110958794

1450※

1210980

1700※

14601190

1990※

1690※

1360

2240※

1920※

1590

129107

86

180015001200

681623521

821740619

996899752

11401030862

137012501070

716454

1000900750


16

1050902730

1330※

1110898

1570※

13101060

1870※

1600※

1330

2000※

1710※

1420

1139475

180015001200

611551461

752678567

887800670

11201010850

12001080911

635647

1000900750

C-148 C-148 C-148 C-148 C-148 HorizontalDimension

TablesC-174 C-174 C-174 C-174 C-174 VerticalUpright


Fans

H.SpeedShaft Speed

r/min

NominalReduction

Ratio9095 9100 9105 9110 9115 9118 9121 9126 9128 9131 9136359

1064399

1133462

1265505

1338565

1446-1 1800


Type

12.5▼

16

364959

4051024

4711149

5221230

5851332

-1 1500

362847

404905

4711020

5271103

5921197

-1 1200

355736

396788

464890

522968

5881053

-1 1000

350694

390743

458841

516916

582998

-1 900

338611

378654

444743

502812

568887

-1 750

289 315 344 343 373 - 1800Double

ReductionVertical

Type

12.5▼

16

316 342 392 406 452 - 1500

328 359 417 449 504 - 1200

329 362 423 463 521 - 1000

328 361 423 466 525 - 900

322 356 418 464 525 - 750

-1 1800

Double Reduction

Upright Type

12.5▼

16

-1 1500-1 1200-1 1000-1 900-1 750


C - 111

PN = P750 X 750N

1.000.850.700.55

1.000.870.730.60

20304050












AmbientTemperature

NominalReduction

Ratio

H.SpeedShaft Speed

r/min

L.SpeedShaft Speed

r/min

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090

18


1008367

25.321.117.0

4134

27.6

655443

857157

958064

12410484

14011794

191159128

222185149

301252203

368308247

485406326

574481386

728610490

818685551

1000900750

565042

14.212.810.7

23.120.817.4

3632

27.5

484336

534840

706352

787159

1079681

12411294

169153128

207186156

273246206

323291244

410370310

461416348

20


907560

***

***

***

756350

***

12310382

***

182152122

***

300251202

***

465389313

***

699585470

***

1000900750

504538

***

***

***

423831

***

696252

***

1029277

***

169152127

***

261236197

***

393355297

***

22.4


806754

* **

***

***

685746

***

1008467

***

14612298

***

231193155

***

390326262

***

601503404

***

1000900750

454033

***

***

***

3834

29.1

***

565142

***

827462

***

13011798

***

219198165

***

338305255

***

DimensionTables


NominalReduction

Ratio

H.SpeedShaft Speed

r/min

Number of Cooling

Fans

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090


Type

18▼

22.4

1800 -1

2981

41106

50127

60156

66162

83203

88213

106255

127358

153431

166433

194459

209498

247664

309950

1500 -1

2869

3991

49110

58135

65142

81177

87187

104223

126316

150376

167387

194407

213450

249595

311854

1200 -1

2658

3777

4793

55114

63121

78151

84161

100190

122272

145323

164338

189353

211397

245521

308750

1000 -1

2548

3565

4579

5296

60103

74127

81137

96162

118233

140276

160291

184303

207345

239450

301650

900 -1

2444

3460

4373

5189

5997

72118

79128

93151

115217

136257

156273

180284

204325

235423

296611

750 -1

2237

3251

4163

4876

5684

68102

75110

88130

110188

129222

150239

172247

196285

226370

285536

Double Reduction

Vertical Type

18▼

22.4

1800 - 29 41 51 60 62 85 90 107 131 149 173 201 224 262 256

1500 - 28 40 49 58 62 82 88 105 129 146 172 199 224 260 272

1200 - 26 37 47 55 61 79 85 100 124 140 168 193 219 253 280

1000 - 25 35 45 53 59 75 82 96 120 135 162 186 213 246 280

900 - 24 34 43 51 57 73 79 93 116 131 159 182 209 240 278

750 - 22 32 41 48 55 68 75 88 111 124 152 174 200 230 272

Double Reduction

Upright Type

18▼

22.4

1800 -1

2365

3285

40102

48125

53130

66163

71171

84204

102287

122345

133346

156367

168399

198532

1500 -1

2255

3173

3988

46108

52114

65141

70150

83178

101253

120301

133310

155326

170360

199476

1200 -1

2146

3061

3775

4491

5097

62121

67129

80152

98218

116258

131270

152282

169318

196417

1000 -1

2038

2852

3663

4277

4883

59102

65110

76129

94186

112221

128233

147243

166276

191360

900 -1

1935

2748

3559

4071

4777

5895

63102

74121

92174

109206

125219

144227

163260

188339

750 -1

1830

2541

3250

3861

4567

5481

6088

70104

88151

103178

120191

138198

157228

181296




C - 112

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles


r/min

H.SpeedShaft Speed

r/min

NominalReduction


18

920789654

1180※994799

1420※1200971

1650※

1380※1110

1870※

1610※1330

1008367

180015001200

555501419

669603505

812733613

931840703

11401040899

565042

1000900750


20

867730587

***

1280※1070864

***

1670※

1430※1170

907560

180015001200

491443370

***

723652546

***

983887742

504538

1000900750


22.4

***

***

***

***

***

806754

180015001200

***

***

***

***

***

454033

1000900750


Upright


Fans

H.SpeedShaft Speed

r/min

NominalReduction

Ratio9095 9100 9105 9110 9115 9118 9121 9126 9128 9131 9136336995

4021141

4371198

4851285

5371375

-1 1800


Type

18▼

22.4

338889

4081032

4411076

5001179

5501252

-1 1500

332777

406911

437946

5041056

5511114

-1 1200

324672

399793

428821

499926

543973

-1 1000

318631

393747

421773

493876

536920

-1 900

306553

380658

406679

480776

521813

-1 750

284 319 355 349 402 - 1800Double

ReductionVertical

Type

18▼

22.4

298 346 380 397 447 - 1500

305 362 393 431 478 - 1200

303 365 395 444 488 - 1000

300 364 393 446 489 - 900

293 358 385 444 485 - 750

-1 1800

Double Reduction

Upright Type

18▼

22.4

-1 1500-1 1200-1 1000-1 900-1 750


* marked models are triple reduction units. Refer to C-114 and C-115.

C - 113

PN = P750 X 750N

1.000.850.700.55

1.000.870.730.60

20304050












AmbientTemperature

NominalReduction

Ratio

H.SpeedShaft Speed

r/min

L.SpeedShaft Speed

r/min

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090

20


907560

26.422.117.7

3933

27.8

615141

***

988266

***

154129103

***

254213171

***

356310250

***

554463372

***

758650527

1000900750

504538

14.813.311.1

23.621.217.7

3430

25.8

***

554941

***

867865

***

143129107

***

209188157

***

311281235

***

441397332

22.4


806754

21.518.014.4

3428.823.1

554637

***

806754

***

12710685

***

201168135

***

310260208

***

480401322

***

694581467

1000900750

454033

12.110.99.1

19.317.414.5

3027.923.3

***

454034

***

716453

***

11210185

***

174157131

***

269243203

***

391352294

25


726048

21.417.814.3

3228.222.9

494132

645343

796653

1008367

1189879

165138110

195163131

261226182

299250201

356310260

456382307

572488392

624527423

1000900750

403630

12.010.89.0

19.117.214.4

27.524.820.7

3532

27.0

444033

555041

665950

928369

1099982

152137114

168151126

220199166

256231193

328296247

354319267

DimensionTables


NominalReduction

Ratio

H.SpeedShaft Speed

r/min

Number of Cooling

Fans

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090


Type

20▼

25

1800 -1

2466

3693

4278

54114

63155

77189

77187

97234

107210

131257

145269

179309

184437

225605

235556

1500 -1

2358

3581

4268

5399

62135

76166

76164

95205

106185

130227

145238

178273

185391

226540

238501

1200 -1

2249

3470

4058

5185

60115

73141

74141

92176

104160

126195

142207

175237

183343

223473

237443

1000 -1

2141

3259

3850

4972

5798

70120

71121

89151

101138

123169

138179

170204

179298

217409

233386

900 -1

2038

3155

3746

4767

5691

68112

70113

87141

98129

120158

135168

166192

176280

214385

229364

750 -1

1933

3048

3640

4558

5379

6496

6798

83122

94113

115137

130147

160168

170247

206338

223322

Triple Reduction

Vertical Type

20▼

25

1800 - 22 33 40 51 60 73 73 91 100 122 135 167 168 206 212

1500 - 22 33 40 50 59 73 73 91 101 123 137 169 173 212 221

1200 - 21 32 39 49 58 70 71 89 100 122 136 168 174 212 225

1000 - 21 31 37 47 56 68 69 87 97 119 134 165 172 210 223

900 - 20 31 37 46 55 66 68 85 96 117 132 162 170 207 222

750 - 19 29 35 44 52 63 65 81 92 113 127 156 166 201 217

Triple Reduction

Upright Type

20▼

25

1800 -1

2466

3693

4278

54113

69168

77189

76185

96231

106208

131257

144266

178306

182434

223601

1500 -1

2357

3581

4168

5399

67147

76166

76163

94203

105184

130227

144236

177271

184389

225537

1200 -1

2249

3470

4058

5185

65126

73141

73140

92175

103159

126195

141206

174236

182342

222471

1000 -1

2141

3259

3850

4872

62107

70120

71120

89150

100137

123169

137178

169203

178297

217408

900 -1

2038

3155

3746

4767

61100

68112

69112

86140

98129

120158

135167

166191

175280

213384

750 -1

1933

3048

3540

4558

5886

6496

6698

83122

94112

115137

130146

159167

170246

206338

SELECTION Parallel Shaft Triple Reduction Nominal Reduction Ratio 20 25



C - 114

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles


r/min

H.SpeedShaft Speed

r/min

NominalReduction


20

***

1100922742

***

150012901070

***

907560

180015001200

***

620559468

***

919838701

***

504538

1000900750

22.841 22.335 22.781 22.930 22.648 21.793 21.793 Exact Reduction Ratio

22.4

758650539

981821660

1140982801

13401140919

150012901070

3290※

2650※3430※

2840※

806754

180015001200

462423355

552498416

670605506

769693580

919841708

2220※

20001670

2440※

22301910

454033

1000900750

24.782 25.651 24.717 24.630 25.908 25.312 24.930 24.930 Exact Reduction Ratio

25

713612497

898752604

1060888714

12501080895

13401150954

159014001190

2890※

2320※3060※

2530※

726048

180015001200

416375313

505456381

597538450

757683571

812732612

1050955796

1940※

17501470

2170※

19901710

403630

1000900750

C-154 C-154 C-154 C-154 C-154 C-156 C-158 C-158 Horizontal DimensionTablesC-180 C-180 C-180 C-180 C-180 Vertical

Upright


Fans

H.SpeedShaft Speed

r/min

NominalReduction

Ratio9095 9100 9105 9110 9115 9118 9121 9126 9128 9131 9136264603

296651

333713

391813

429867

481794

6631095

6631095

-1 1800


Type

20▼

25

267545

301590

340647

399738

436784

486801

7011157

7011157

-1 1500

266481

301524

340575

397653

435694

481794

7231193

7231193

-1 1200

262419

297458

336503

391569

428605

472779

7261199

7261199

-1 1000

258396

294433

332475

386538

423572

465768

7241195

7241195

-1 900

250349

285383

322421

375475

410506

451744

7141178

7141178

-1 750

238 265 298 348 386 - 1800Triple

ReductionVertical

Type

20▼

25

248 278 313 367 404 - 1500

252 285 321 377 412 - 1200

251 285 321 375 411 - 1000

249 283 319 372 408 - 900

243 277 313 364 399 - 750

-1 1800

Triple Reduction

Upright Type

20▼

25

-1 1500-1 1200-1 1000-1 900-1 750


* marked models are double reduction units. Refer to C-112 and C-113.

C - 115

PN = P750 X 750N

1.000.850.700.55

1.000.870.730.60

20304050












AmbientTemperature

NominalReduction

Ratio

H.SpeedShaft Speed

r/min

L.SpeedShaft Speed

r/min

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090

28


180015001200

645443

17.414.511.7

28.023.418.8

4437

29.7

584839

655443

847056

978165

13211189

154129103

209175140

249208167

329275221

395330265

502420337

558467375

1000900750

363227

9.78.87.3

15.714.111.8

24.822.318.6

3229.524.6

363227

474235

544941

746756

867865

11710688

140126105

185167139

222200167

282254212

314283236

31.5


574838

16.914.111.3

26.121.817.4

3831

25.5

514234

635242

816854

988266

12610584

163136109

208174140

239200160

315264212

355297238

481402323

511427343

1000900750

322924

9.48.57.1

14.513.110.9

21.319.216.0

28.825.921.7

3531

26.6

454034

554941

716453

918269

11710588

134121101

177159133

199179150

270244203

287259216

35.5


514234

13.711.59.2

21.417.914.4

3428.623.0

463931

514334

685745

816854

1018568

12810786

160134107

199167134

265221178

307257206

413346278

453379304

1000900750

282521

7.76.95.8

12.010.89.0

19.217.314.4

26.223.619.7

29.026.121.8

3834

28.8

454134

575143

726554

908167

11210184

148134112

172155130

232209175

254229191

DimensionTables


NominalReduction

Ratio

H.SpeedShaft Speed

r/min

Number of Cooling

Fans

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090


Type

28▼

35.5

1800 -1

2160

3284

3972

49104

58142

70172

74179

92222

104203

124243

140258

171295

177422

218586

230545

1500 -1

2151

3172

3862

4891

56122

69150

72156

90194

102178

123215

137226

170260

176372

218521

229484

1200 -1

1943

3061

3652

4677

53103

66128

69132

87166

98152

119184

133194

165225

171322

214454

225421

1000 -1

1836

2851

3444

4465

5187

64110

66112

84142

94129

115158

128166

161193

166277

208392

219363

900 -1

1833

2748

3341

4361

4981

62102

64104

82132

92121

113148

125155

157181

162259

205369

215341

750 -1

1728

2641

3135

4152

4669

5988

6190

78115

87104

108129

119135

151158

156226

197323

206298

Triple Reduction

Vertical Type

28▼

35.5

1800 - 21 31 37 47 55 68 70 87 98 117 132 161 165 201 211

1500 - 20 30 36 46 54 67 69 86 97 117 131 162 167 205 217

1200 - 19 29 35 45 52 65 67 84 95 115 129 160 165 205 216

1000 - 18 27 33 43 50 62 65 82 92 112 125 156 161 202 212

900 - 17 27 32 42 48 61 63 80 90 110 122 153 158 199 209

750 - 16 25 30 40 46 58 60 76 86 106 117 148 152 193 202

Triple Reduction

Upright Type

28▼

35.5

1800 -1

2160

3284

3972

49104

65158

70172

74179

91220

104203

124243

140258

170292

177422

216582

1500 -1

2151

3172

3862

4890

62136

69150

72156

89193

102178

123215

137226

169258

176372

216518

1200 -1

1943

3061

3652

4677

59115

66128

69132

86165

98152

119184

133194

165224

171322

213452

1000 -1

1836

2851

3444

4465

5697

64110

66112

83141

94129

115158

128166

160193

166277

208391

900 -1

1833

2748

3341

4361

5590

62102

64104

81132

92121

113148

125155

157181

162259

204368

750 -1

1728

2641

3135

4152

5177

5988

6190

77114

87104

108129

119135

151158

156226

197323

SELECTION Parallel Shaft Triple Reduction Nominal Reduction Ratio 28 35.5



C - 116

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles


r/min

H.SpeedShaft Speed

r/min

NominalReduction

Ratio9095 9100 9105 9110 9115 9118 9121 9126 9128 9131 913628.552 27.527 28.078 28.261 27.914 29.333 29.333 28.679 28.315 28.315 Exact Reduction Ratio

28

624535444

800669538

957813653

1110932749

12601080896

1870※

1570※

1260

2000※

1720※

1430

2640※

2230※

1790※2550※

2050※2750※

2280※

645443

180015001200

378341285

450405339

546492412

626565472

768703603

1050954798

12201110929

150013501130

1720※

15501290

1960※

17901530

363227

1000900750


31.5

588497400

722604485

865724581

1040898727

1120963791

153012801030

1730※

1450※

1160

1870※

1600※

1330

2460※

2060※

1660※2240※

1800※2450※

2030※

574838

180015001200

334301252

406366306

486438366

608548458

661596499

865780653

977881736

11301020857

138012501040

1500※

13601130

1740※

15901340

322924

1000900750


35.5

525450366

643538432

781653525

895749602

1040899745

13001090878

1530※

1280※

1030

1690※

1450※

1200

2110※

1760※

1420※2110※

1700※2340※

1940※

514234

180015001200

306276231

361325272

439395330

503454379

639581485

735662554

866780652

1000908759

11801070895

1420※

12801070

1660※

15101260

282521

1000900750


Upright


Fans

H.SpeedShaft Speed

r/min

NominalReduction

Ratio9095 9100 9105 9110 9115 9118 9121 9126 9128 9131 9136250572

294647

323691

378786

417842

467770

508838

508838

564931

6571084

6571084

-1 1800


Type

28▼

35.5

248506

295577

325618

377697

421757

466769

515849

515849

577952

6821125

6821125

-1 1500

243439

290504

319538

369607

415661

458756

512845

512845

579955

6891137

6891137

-1 1200

236378

283436

310465

359523

403570

448739

504831

504831

572943

6831128

6831128

-1 1000

231355

278410

305437

353491

395535

440726

497820

497820

565933

6771117

6771117

-1 900

222310

268360

294383

340431

380468

426702

483796

483796

551909

6611091

6611091

-1 750

231 267 292 344 380 - 1800Triple

ReductionVertical

Type

28▼

35.5

235 277 304 356 393 - 1500

233 277 306 355 398 - 1200

229 273 301 348 391 - 1000

225 270 296 343 385 - 900

218 262 287 332 373 - 750

-1 1800

Triple Reduction

Upright Type

28▼

35.5

-1 1500-1 1200-1 1000-1 900-1 750

SELECTION Parallel Shaft Triple Reduction Nominal Reduction Ratio 28 35.5

C - 117

PN = P750 X 750N

1.000.850.700.55

1.000.870.730.60

20304050












AmbientTemperature

NominalReduction

Ratio

H.SpeedShaft Speed

r/min

L.SpeedShaft Speed

r/min

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090

40


453830

13.611.49.1

21.217.714.2

3025.520.4

3933

26.7

504234

645342

756350

1058870

12510484

174145116

192160129

252211169

292244196

374313251

411343276

1000900750

252319

7.66.95.7

11.910.78.9

17.115.412.8

22.320.116.8

28.525.621.4

3532

26.7

423831

595344

706352

968772

1079781

141127106

164147123

210189158

230207173

45


403327

11.19.37.4

17.414.511.6

27.522.918.4

3630

24.3

4134

27.9

544536

625241

857157

988266

13411290

160134107

212177142

253211170

321269216

364304244

1000900750

222017

6.25.64.7

9.78.77.3

15.413.811.5

20.318.315.3

23.321.017.5

3027.422.9

3431

26.2

474235

554941

756756

898167

11810789

142128106

180162135

204184153

50


363024

24.620.516.5

3126.721.4

4033

27.0

514334

615141

816754

1008467

13311189

14812499

203169136

218182146

308257207

316264212

1000900750

201815

13.812.410.3

17.916.113.4

22.520.316.9

28.926.021.6

3431

26.0

454034

565042

746756

837462

11310285

12211092

173155130

177160133

DimensionTables


NominalReduction

Ratio

H.SpeedShaft Speed

r/min

Number of Cooling

Fans

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090


Type

40▼

50

1800 -1

2057

3180

3463

4697

53130

66162

66159

83200

92180

113221

125230

157270

159377

201540

210497

1500 -1

2049

3069

3354

4483

51111

63137

64137

80173

89155

110192

121199

154235

155328

198473

206434

1200 -1

1841

2858

3044

4270

4892

60116

60115

77146

84130

106164

115168

148201

148279

191406

198371

1000 -1

1734

2749

2937

3958

4577

5798

5796

73124

80110

101139

110142

142171

142237

185348

191317

900 -1

1731

2645

2734

3854

4371

5590

5589

71115

78102

99130

106132

138159

138220

180325

186295

750 -1

1627

2439

2529

3646

4060

5278

5176

6799

7387

94112

101113

132138

131190

172283

177256

Triple Reduction

Vertical Type

40▼

50

1800 - 20 29 33 44 51 64 64 80 88 108 119 150 151 190 199

1500 - 19 29 32 43 50 62 62 78 86 107 117 148 149 189 198

1200 - 18 27 30 41 47 59 59 75 82 103 112 144 144 185 192

1000 - 17 26 28 39 44 56 56 72 78 99 108 139 139 180 186

900 - 16 25 27 37 43 54 54 70 76 97 105 136 136 177 182

750 - 15 24 25 35 40 51 51 66 72 92 99 130 129 170 174

Triple Reduction

Upright Type

40▼

50

1800 -1

2057

3180

3463

4697

59145

66162

66159

83200

92180

113221

125230

157270

159377

201540

1500 -1

2049

3069

3354

4483

57125

63137

64137

80173

89155

110192

121199

154235

155328

198473

1200 -1

1841

2858

3044

4270

54105

60116

60115

77146

84130

106164

115168

148201

148279

191406

1000 -1

1734

2749

2937

3958

5288

5798

5796

73124

80110

101139

110142

142171

142237

185348

900 -1

1731

2645

2734

3854

5082

5590

5589

71115

78102

99130

106132

138159

138220

180325

750 -1

1627

2439

2529

3646

4770

5278

5176

6799

7387

94112

101113

132138

131190

172283




C - 118

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles


r/min

H.SpeedShaft Speed

r/min

NominalReduction


40

482403324

589492395

695581467

875738593

933791635

11901030831

1420※

1180※

955

1570※

1350※

1110

1940※

1630※

1310※1850※

1490※2080※

1730※

453830

180015001200

271244204

330298249

390352294

495447373

531479400

695627524

799720602

930839701

1090988826

1240※

1120941

1470※

13201110

252319

1000900750


45

432366294

524438352

636532427

730610490

876751623

1030865695

1210※

1010※

816

1380※

1180※

949

1740※

1460※

1170※1670※

1340※1910※

1580※

403327

180015001200

246222185

294265221

357322269

410369308

524473395

581523437

682615514

794715598

981885740

1120※

1010848

1320※

11901000

222017

1000900750


50

388324260

464388311

566474380

695581467

770644517

1000843677

1120※

937※

753

1280※

1090※

876

1610※

1340※

1080※1460※

1170※1700※

1390※

363024

180015001200

217196163

260234196

318286239

390352294

432390326

566510426

629567474

732660552

906817682

986※

889742

1160※

1040876

201815

1000900750


Upright


Fans

H.SpeedShaft Speed

r/min

NominalReduction

Ratio9095 9100 9105 9110 9115 9118 9121 9126 9128 9131 9136238545

274603

307656

363756

396801

440726

488805

488805

545899

6311042

6311042

-1 1800


Type

40▼

50

236481

270529

305581

357661

393706

434715

489807

489807

550908

6411058

6411058

-1 1500

230416

262454

299505

344566

383611

421695

482795

482795

546901

6391055

6391055

-1 1200

223358

253389

291435

332483

371525

408673

471777

471777

537886

6301039

6301039

-1 1000

219335

247364

285409

324451

364493

399659

463764

463764

529873

6221026

6221026

-1 900

210293

236316

275358

309392

350431

383632

448739

448739

514847

604997

604997

-1 750

223 259 286 340 373 - 1800Triple

ReductionVertical

Type40▼

50

225 258 289 343 374 - 1500

222 253 288 334 370 - 1200

217 246 282 324 362 - 1000

213 241 278 317 356 - 900

206 232 269 304 343 - 750

-1 1800

Triple Reduction

Upright Type

40▼

50

-1 1500-1 1200-1 1000-1 900-1 750


C - 119

PN = P750 X 750N

1.000.850.700.55

1.000.870.730.60

20304050












AmbientTemperature

NominalReduction

Ratio

H.SpeedShaft Speed

r/min

L.SpeedShaft Speed

r/min

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090

56


322721

22.118.514.8

29.124.319.5

3327.622.1

4336

29.3

504234

655443

796653

1028669

12310383

170142114

189158126

264221177

280234188

1000900750

181613

12.411.19.3

16.214.612.2

18.516.613.9

24.522.118.4

28.525.621.4

3632

27.4

444033

575143

696252

958671

1059579

148133111

157141118

63


292419

19.716.513.2

25.721.517.2

3227.121.7

4033

27.1

473931

665544

776451

1068871

1199979

156131105

179150120

230192154

254212170

1000900750

161412

11.09.98.3

14.413.010.8

18.116.313.6

22.620.316.9

26.523.919.9

3733

27.8

433832

595344

666050

877966

1009075

12911697

142128107

71


252117

17.714.811.9

23.419.615.7

26.622.217.8

3429.023.2

3932

26.1

534435

605040

826955

998366

13110988

155130104

197165132

225188151

1000900750

141311

9.98.97.4

13.111.89.8

14.813.411.2

19.417.514.6

21.819.616.4

29.726.822.4

3430

25.6

464134

555041

736655

877865

1109983

12611395

DimensionTables


NominalReduction

Ratio

H.SpeedShaft Speed

r/min

Number of Cooling

Fans

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090


Type

56▼

71

1800 -1

3259

3983

49120

59145

62150

78188

86169

106208

119219

146250

152362

186500

198469

1500 -1

3050

3770

47102

57124

60128

75161

83145

102178

115189

141216

148314

181432

194409

1200 -1

2842

3558

4485

53103

56107

70134

79122

96149

109160

134182

142267

172366

187350

1000 -1

2734

3348

4171

5086

5390

66112

75103

92126

104135

127153

136227

165310

180298

900 -1

2632

3144

4065

4879

5183

64104

7395

89117

101125

123142

132211

160289

175278

750 -1

2427

2938

3755

4567

4871

6089

6882

8399

95108

116122

125182

152249

167241

Triple Reduction

Vertical Type

56▼

71

1800 - 31 38 47 58 60 75 83 102 114 140 145 178 188

1500 - 30 36 46 55 58 73 81 99 111 137 143 175 187

1200 - 28 34 43 52 55 69 77 94 107 131 138 168 182

1000 - 26 32 41 49 52 65 74 90 102 125 133 162 176

900 - 25 31 39 47 51 63 72 87 100 122 130 157 172

750 - 24 29 37 44 48 59 68 82 94 115 124 150 164

Triple Reduction

Upright Type

56▼

71

1800 -1

3259

3983

54133

59145

62150

78188

86169

106208

119219

146250

152362

186500

1500 -1

3050

3770

52113

57124

60128

75161

83145

102178

115189

141216

148314

181432

1200 -1

2842

3558

4994

53103

56107

70134

79122

96149

109160

134182

142267

172366

1000 -1

2734

3348

4679

5086

5390

66112

75103

92126

104135

127153

136227

165310

900 -1

2632

3144

4472

4879

5183

64104

7395

89117

101125

123142

132211

160289

750 -1

2427

2938

4161

4567

4871

6089

6882

8399

95108

116122

125182

152249




C - 120

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles


r/min

H.SpeedShaft Speed

r/min

NominalReduction


56

338282226

413345277

502419336

575481386

717615494

856716575

972※

812※

652

1130※

946※

759

1350※

1130※

909※1360※

1090※1600※

1290※

322721

180015001200

189170142

231208174

281253212

322291243

413372311

480433362

545492411

635572478

760685572

916※

826690

1080※

974814

181613

1000900750


63

299249200

378316253

446373299

566473380

607508408

786657528

897※

750※

602

1040※

873※

701

1240※

1040※

839※1190※

960※1410※

1130※

292419

180015001200

167151126

212191159

250225188

317286239

340307256

441397332

503454379

586528441

701632528

802※

723604

946※

853713

161412

1000900750


71

271226182

336281225

408341274

468391314

599501402

667558448

780※

652※

524

908※

759※

610

1100※

922※

740※1010※

814※1190※

961※

252117

180015001200

152137114

188170141

229206172

262236197

336303253

374337281

438394329

509459383

618557466

681※

613※

512

803※

724604

141311

1000900750


Upright


Fans

H.SpeedShaft Speed

r/min

NominalReduction

Ratio9095 9100 9105 9110 9115 9118 9121 9126 9128 9131 9136214491

262576

288617

337700

378764

422696

448739

448739

512845

591975

591975

-1 1800


Type

56▼

71

210427

258504

283539

329610

370664

413681

443731

443731

509840

592977

592977

-1 1500

201364

249433

273462

318522

356567

398657

432712

432712

498821

583962

583962

-1 1200

193310

241371

264395

306445

342483

384633

418690

418690

484799

570940

570940

-1 1000

188289

235346

257369

298415

333451

375618

410676

410676

475784

560924

560924

-1 900

179250

225301

246320

284361

318391

358591

393648

393648

457754

540891

540891

-1 750

205 248 274 321 362 - 1800Triple

ReductionVertical

Type

56▼

71

202 247 272 318 357 - 1500

196 242 266 309 347 - 1200

189 235 258 299 335 - 1000

185 230 252 293 328 - 900

177 221 242 280 313 - 750

-1 1800

Triple Reduction

Upright Type

56▼

71

-1 1500-1 1200-1 1000-1 900-1 750


C - 121

PN = P750 X 750N

1.000.850.700.55

1.000.870.730.60

20304050












AmbientTemperature

NominalReduction

Ratio

H.SpeedShaft Speed

r/min

L.SpeedShaft Speed

r/min

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090

80


231915

***

20.617.213.8

***

3227.421.9

***

504233

***

826855

***

12510584

***

189158127

206172138

1000900750

13119.4

***

11.510.48.7

***

18.316.513.7

***

28.325.521.3

***

454134

***

706353

***

1069579

11510487

90


201713

***

18.815.712.6

***

27.923.318.7

***

4034

27.3

***

635342

***

1058870

***

162136109

***

1000900750

11108.3

***

10.59.47.9

***

15.614.011.7

***

22.820.517.1

***

3532

26.7

***

595344

***

918268

***

DimensionTables

Horizontal C-150 C-150 C-150 C-152 C-152 C-152 C-154Vertical C-176 C-176 C-176 C-178 C-178 C-178 C-180Upright C-192 C-192 C-192 C-194 C-194 C-194

NominalReduction

Ratio

H.SpeedShaft Speed

r/min

Number of Cooling

Fans

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090


Type

80▼

90

1800 -1

3779

56137

73177

100196

139238

178479

202479

1500 -1

3667

54118

70151

96167

134205

173414

198417

1200 -1

3355

5097

66126

91141

127173

165351

190356

1000 -1

3146

4781

62106

86118

121146

158297

183304

900 -1

3042

4574

6097

83109

117135

153276

178283

750 -1

2836

4263

5683

7893

111116

145238

170246

Triple Reduction

Vertical Type

80▼

90

1800 - 36 55 71 96 134 171 192

1500 - 35 52 69 93 130 168 190

1200 - 33 49 65 89 125 161 185

1000 - 31 47 61 85 119 155 179

900 - 29 45 59 82 116 151 175

750 - 27 42 56 77 109 143 167

Triple Reduction

Upright Type

80▼

90

1800 -1

3779

56137

73177

100196

139238

178479

1500 -1

3667

54118

70151

96167

134205

173414

1200 -1

3355

5097

66126

91141

127173

165351

1000 -1

3146

4781

62106

86118

121146

158297

900 -1

3042

4574

6097

83109

117135

153276

750 -1

2836

4263

5683

7893

111116

145238




C - 122

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles


r/min

H.SpeedShaft Speed

r/min

NominalReduction


80

240200160

298249200

363304244

397332266

495413332

647541434

720※

602※

483

839※

701※

563

1010※

851※

683※

231915

180015001200

134121101

167150125

203183153

222200167

277250208

363327273

404364304

470424354

571514430

13119.4

1000900750

85.313 83.332 91.315 89.216 85.313 85.313 86.903 Exact Reduction Ratio

90

220183147

***

322269216

***

420351281

549459368

661※

552※

443

769※

643※

516

902※

754※

605※

201713

180015001200

12311192

***

180162135

***

235212177

308277231

370334278

431388324

506456380

11108.3

1000900750

C-154 C-154 C-154 C-154 C-154 C-156 C-156 C-156 C-158 Horizontal DimensionTablesC-180 C-180 C-180 C-180 C-180 Vertical

Upright


Fans

H.SpeedShaft Speed

r/min

NominalReduction

Ratio9095 9100 9105 9110 9115 9118 9121 9126 9128 9131 9136214490

265582

283606

333693

362732

399659

446735

446735

500825

-1 1800


Type80▼

90

209426

260510

278530

326604

354636

389642

441727

441727

495817

-1 1500

201363

252438

269454

314516

340543

373615

429708

429708

482796

-1 1200

193309

243374

259388

302440

327462

358591

415685

415685

468772

-1 1000

188288

237350

253362

295411

319431

349576

406670

406670

459757

-1 900

179250

227304

241315

281357

304374

332548

389642

389642

440726

-1 750

204 251 269 319 347 - 1800Triple

ReductionVertical

Type

80▼

90

202 250 268 315 343 - 1500

196 244 261 306 332 - 1200

189 237 253 296 321 - 1000

185 233 248 290 314 - 900

176 223 238 277 300 - 750

-1 1800

Triple Reduction

Upright Type

80▼

90

-1 1500-1 1200-1 1000-1 900-1 750



C - 123

PN = P750 X 750N

1.000.850.700.55

1.000.870.730.60

20304050












AmbientTemperature

NominalReduction

Ratio

H.SpeedShaft Speed

r/min

Number of Cooling

Fans

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090


Type80▼

100

1800 - 27 34 42 51 52 65 73 100 122 128 155 1571500 - 26 32 41 50 50 62 71 97 118 125 151 1561200 - 24 30 39 47 47 59 67 93 113 120 145 1521000 - 23 29 37 45 45 56 64 89 108 115 139 148

900 - 22 28 36 43 44 54 62 86 105 112 135 145750 - 21 26 34 41 41 51 59 82 99 107 128 139

Quadruple Reduction

Vertical Type80▼

100

1800 - 28 35 45 54 54 67 77 105 128 136 164 1721500 - 27 33 43 51 52 64 73 101 123 131 157 1671200 - 25 31 40 48 49 60 69 96 116 124 149 1601000 - 24 29 38 46 46 57 65 91 110 119 142 154

900 - 23 28 37 44 45 55 63 88 107 115 138 150750 - 21 26 34 41 42 51 60 83 101 109 130 143

Quadruple Reduction

Upright Type80▼

100

1800 - 27 34 47 51 52 65 74 101 124 130 1571500 - 26 32 45 50 50 63 71 98 120 126 1531200 - 25 31 43 47 48 59 68 93 114 121 1461000 - 23 29 41 45 45 56 64 89 108 116 139

900 - 22 28 39 43 44 54 62 87 105 113 136750 - 21 26 37 41 41 51 59 82 100 107 129

NominalReduction

Ratio

H.SpeedShaft Speed

r/min

L.SpeedShaft Speed

r/min

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090

80


231915

15.312.810.3

***

25.020.916.7

***

3227.221.7

***

504133

***

826854

***

13411189

***

***

1000900750

13119.4

8.67.76.4

***

13.912.610.5

***

18.116.313.6

***

27.925.120.9

***

454134

***

746755

***

***

90


201713

13.811.59.2

***

20.517.113.7

***

3226.721.4

***

504133

***

816854

***

12410483

***

180150120

1000900750

11108.3

7.76.95.8

***

11.510.38.6

***

17.916.113.4

***

27.925.120.9

***

454134

***

696252

***

1019175

100

Exact Reduction Ratio 103.09 102.69 99.26 101.29 103.97 98.871 100.57 97.650 96.720 96.444 96.432 101.66180015001200

181512

12.310.38.2

16.113.410.7

20.116.813.5

25.120.916.7

29.824.919.9

3227.221.7

494133

786552

826854

1189979

13411189

163136109

1000900750

109.07.5

6.96.25.2

9.08.16.7

11.210.18.4

13.912.610.5

16.615.012.5

18.116.313.6

27.624.920.7

433933

454134

665949

746755

918268

DimensionTables

Horizontal C-160 C-160 C-160 C-160 C-160 C-160 C-162 C-162 C-162 C-162 C-162 C-164Vertical C-182 C-182 C-182 C-182 C-182 C-182 C-184 C-184 C-184 C-184 C-184 C-186Upright C-196 C-196 C-196 C-196 C-196 C-196 C-198 C-198 C-198 C-198 C-198

SELECTION Parallel Shaft Quadruple Reduction Nominal Reduction Ratio 80 100



C - 124

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles


Fans

H.SpeedShaft Speed

r/min

NominalReduction

Ratio9095 9100 9105 9110 9115 9118 9121 9126 9128 9131 9136177 204 230 271 299 328 392 392 425 521 521 - 1800 Quadruple

ReductionHorizontal

Type80▼

100

175 203 228 268 295 322 386 386 422 515 515 - 1500170 199 223 261 286 311 374 374 413 502 502 - 1200165 193 217 253 277 300 362 362 402 487 487 - 1000162 190 213 248 271 293 354 354 395 478 478 - 900155 182 205 238 260 280 339 339 381 460 460 - 750


Vertical Type80▼

100

187 219 245 286 313 - 1500179 210 235 273 299 - 1200172 202 226 262 287 - 1000167 197 221 256 280 - 900159 188 211 244 267 - 750


Upright Type80▼

100

- 1500- 1200- 1000- 900- 750


r/min

H.SpeedShaft Speed

r/min

NominalReduction


80

***

***

***

***

***

***

***

***

***

1100922740

12101060872

231915

180015001200

***

***

***

***

***

***

***

***

***

618557465

727654545

13119.4

1000900750

88.676 91.041 89.191 89.191 Exact Reduction Ratio

90

***

254212170

***

353295237

***

***

***

***

***

994831667

1170980786

201713

180015001200

***

142128106

***

198178149

***

***

***

***

***

557502419

657592494

11108.3

1000900750


100

192160128

232194155

274229184

348290233

373312250

465388310

556465373

648541434

800669537

871728584

1020858689

181512

180015001200

1079680

12911797

153138115

194175146

209188157

258232194

311281234

363327273

448404337

488439367

575518433

109.07.5

1000900750


Upright


* marked models are triple reduction units. Refer to C-122 and C-123.

C - 125

PN = P750 X 750N

1.000.850.700.55

1.000.870.730.60

20304050












AmbientTemperature

NominalReduction

Ratio

H.SpeedShaft Speed

r/min

Number of Cooling

Fans

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090


Type112▼

140

1800 - 25 31 40 48 50 61 70 84 95 117 122 150 1511500 - 24 30 38 46 48 59 68 81 92 113 119 146 1491200 - 23 28 36 43 45 56 64 77 88 108 114 139 1451000 - 22 27 35 41 43 53 61 73 84 103 109 134 141

900 - 21 26 34 40 42 51 59 71 82 100 106 130 138750 - 20 24 32 38 39 48 56 67 77 95 101 124 132

Quadruple Reduction

Vertical Type112▼

140

1800 - 27 33 42 50 52 64 73 88 100 122 129 158 1641500 - 25 31 40 47 50 61 70 84 96 117 124 151 1591200 - 24 29 37 45 47 57 66 79 90 111 118 144 1521000 - 22 27 35 42 44 54 62 75 86 105 112 137 146

900 - 21 26 34 41 43 52 60 72 83 102 109 133 143750 - 20 24 32 38 40 49 57 68 79 96 103 126 136

Quadruple Reduction

Upright Type112▼

140

1800 - 26 31 44 48 50 62 71 84 96 118 124 1521500 - 25 30 43 46 48 59 68 81 93 114 120 1471200 - 23 28 40 43 46 56 65 77 89 108 115 1401000 - 22 27 38 41 43 53 61 73 84 103 110 134

900 - 21 26 37 40 42 51 60 71 82 100 107 131750 - 20 24 35 38 39 48 56 67 78 95 102 124

NominalReduction

Ratio

H.SpeedShaft Speed

r/min

L.SpeedShaft Speed

r/min

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090

112


161311

11.19.27.4

14.612.29.8

16.513.811.0

21.518.014.4

24.520.416.4

3227.221.8

3832

26.0

504133

655443

826854

1028568

13010887

14412097

1000900750

8.98.06.7

6.25.64.6

8.27.36.1

9.28.36.9

12.010.89.0

13.712.310.3

18.116.313.6

21.719.616.3

27.925.120.9

3633

27.5

454134

575143

726554

807260

125


14129.6

9.98.36.6

12.910.78.6

16.313.610.9

20.317.013.6

23.919.916.0

3126.621.3

3933

26.6

504133

605040

826854

907560

12410483

13110987

1000900750

8.07.26.0

5.55.04.2

7.26.55.4

9.18.26.8

11.310.28.5

13.312.010.0

17.816.013.4

22.220.016.7

27.925.120.9

3330

25.2

454134

504538

696252

736655

140


13118.6

8.97.46.0

11.79.87.8

13.411.28.9

17.314.511.6

19.616.413.1

25.621.417.1

3126.120.9

4033

27.1

504133

695846

786552

1078971

1169777

1000900750

7.16.45.4

5.04.53.7

6.55.94.9

7.56.75.6

9.78.77.3

10.99.98.2

14.312.910.7

17.515.713.1

22.720.417.0

28.025.221.0

3835

29.2

433932

595445

645848

DimensionTables





C - 126

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles


Fans

H.SpeedShaft Speed

r/min

NominalReduction

Ratio9095 9100 9105 9110 9115 9118 9121 9126 9128 9131 9136164 198 218 256 287 321 372 372 413 502 502 - 1800 Quadruple

ReductionHorizontal

Type112▼

140

162 196 216 252 282 314 365 365 406 493 493 - 1500157 192 210 245 273 303 352 352 394 476 476 - 1200152 187 204 237 264 292 340 340 381 461 461 - 1000149 183 200 232 258 285 333 333 373 451 451 - 900142 176 192 223 247 273 319 319 358 432 432 - 750


Vertical Type112▼

140

172 211 230 267 297 - 1500164 202 220 256 284 - 1200157 194 212 245 272 - 1000153 189 207 239 265 - 900146 181 197 228 253 - 750


Upright Type112▼

140

- 1500- 1200- 1000- 900- 750


r/min

H.SpeedShaft Speed

r/min

NominalReduction


112

174145116

206172138

251209168

287240192

368308247

433362290

482403323

561469376

671561450

809676542

954797640

161311

180015001200

978773

11510486

140126105

161145121

206186155

242218182

270243203

314283236

376338283

453408341

534481402

8.98.06.7

1000900750


125

154128103

191159127

223186149

286239191

304253203

397332266

445371298

518432347

619517415

686573460

810676542

14129.6

180015001200

867764

1069680

12411294

160144120

170153127

222200167

249224187

290261218

347312261

384346289

453408341

8.07.26.0

1000900750


140

13911693

170141113

206172138

236197158

303253203

337281226

387323259

450376301

555464372

669559448

789659529

13118.6

180015001200

787058

958571

11510486

13211999

169152127

188170142

216195162

252227189

310280233

374337281

441398332

7.16.45.4

1000900750


Upright


C - 127

PN = P750 X 750N

1.000.850.700.55

1.000.870.730.60

20304050












AmbientTemperature

NominalReduction

Ratio

H.SpeedShaft Speed

r/min

Number of Cooling

Fans

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090


Type160▼

200

1800 - 23 29 36 43 42 52 61 74 85 103 109 131 1381500 - 22 28 34 41 40 49 58 71 81 98 105 126 1341200 - 20 26 32 38 37 46 55 66 76 92 99 118 1271000 - 19 24 30 36 35 43 51 62 72 87 93 112 121

900 - 18 23 29 35 33 41 49 59 69 84 90 108 117750 - 17 21 27 32 31 38 46 55 65 78 85 101 111

Quadruple Reduction

Vertical Type160▼

200

1800 - 24 30 37 44 43 53 63 76 88 106 113 136 1451500 - 23 28 35 42 41 50 60 72 83 101 108 129 1391200 - 21 26 33 39 38 46 56 67 78 94 101 121 1311000 - 20 24 31 37 35 43 52 63 73 88 95 114 124

900 - 19 23 30 35 34 41 50 60 70 85 92 110 120750 - 17 21 27 33 31 38 47 56 66 79 86 103 113

Quadruple Reduction

Upright Type160▼

200

1800 - 23 29 39 43 42 52 62 74 85 104 110 1321500 - 22 28 37 41 40 49 59 71 81 99 105 1261200 - 21 26 35 38 37 46 55 66 76 93 99 1191000 - 19 24 33 36 35 43 51 62 72 87 94 112

900 - 18 23 32 35 33 41 50 59 69 84 91 108750 - 17 21 30 32 31 38 46 55 65 79 85 102

NominalReduction

Ratio

H.SpeedShaft Speed

r/min

L.SpeedShaft Speed

r/min

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090

160


119.47.5

7.76.45.1

10.48.76.9

12.610.58.4

16.513.711.0

17.414.511.6

25.521.317.1

26.622.217.8

4235

28.1

4437

29.9

635342

715947

957964

998266

1000900750

6.35.64.7

4.33.93.2

5.85.24.3

7.06.35.3

9.18.26.9

9.78.77.2

14.212.810.7

14.813.311.1

23.421.117.5

24.922.418.7

3531

26.6

3935

29.7

534840

554941

180


108.36.7

6.95.84.6

9.47.96.3

10.38.66.9

14.011.79.4

16.113.410.8

20.517.113.7

25.421.217.0

3227.221.8

4134

27.9

534435

625242

826854

877358

1000900750

5.65.04.2

3.93.52.9

5.34.74.0

5.75.24.3

7.87.15.9

9.08.16.7

11.410.38.6

14.212.810.7

18.216.413.7

23.321.017.5

29.726.722.3

3531

26.4

454134

494436

200


9.07.56.0

6.25.24.1

8.06.75.4

10.28.56.8

12.610.58.4

15.012.510.0

17.414.511.6

24.720.616.5

26.622.217.8

4033

26.8

4437

29.9

594939

715947

796653

1000900750

5.04.53.8

3.53.12.6

4.54.03.4

5.75.14.3

7.06.35.3

8.47.56.3

9.78.77.3

13.812.410.3

14.813.311.1

22.420.216.8

24.922.418.7

3330

25.0

3935

29.7

443933

DimensionTables





C - 128

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles


Fans

H.SpeedShaft Speed

r/min

NominalReduction

Ratio9095 9100 9105 9110 9115 9118 9121 9126 9128 9131 9136154 180 202 236 269 297 360 360 393 480 480 - 1800 Quadruple

ReductionHorizontal

Type160▼

200

149 175 196 229 262 288 351 351 385 467 467 - 1500142 167 187 218 250 275 337 337 373 449 449 - 1200135 160 179 207 240 263 325 325 361 432 432 - 1000131 155 174 201 234 256 317 317 353 422 422 - 900123 147 164 190 222 243 303 303 339 403 403 - 750


Vertical Type160▼

200

155 183 204 237 272 - 1500146 173 193 223 258 - 1200138 164 183 212 246 - 1000133 159 177 205 239 - 900125 150 167 193 226 - 750


Upright Type160▼

200

- 1500- 1200- 1000- 900- 750


r/min

H.SpeedShaft Speed

r/min

NominalReduction


160

12310382

14111894

183153123

226188151

250208167

327273219

355296237

413345276

512428343

567474380

669559448

119.47.5

180015001200

696251

797159

1029277

12611395

139126105

183165137

198178149

231208173

286258215

317286238

374337281

6.35.64.7

1000900750


180

1058870

12610584

153127102

186155125

239199160

277231185

322269216

375313251

451377302

521435349

614513411

108.36.7

180015001200

595344

706353

857764

1049478

133120100

155139116

180162135

209189157

252227190

291262219

343309258

5.65.04.2

1000900750


200

937862

1159677

13611391

173144115

197164132

258215172

295246198

344287230

416348279

442369296

521435349

9.07.56.0

180015001200

524739

645848

766857

968772

1109982

144130108

165148124

192173144

233210175

247222185

291262219

5.04.53.8

1000900750


Upright


C - 129

PN = P750 X 750N

1.000.850.700.55

1.000.870.730.60

20304050












AmbientTemperature

NominalReduction

Ratio

H.SpeedShaft Speed

r/min

Number of Cooling

Fans

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090


Type224▼

280

1800 - 23 27 35 40 40 49 59 71 80 99 104 127 1321500 - 22 25 33 38 38 47 56 67 77 94 99 121 1271200 - 20 24 31 36 36 43 52 63 72 88 94 114 1211000 - 19 22 29 34 33 41 49 59 68 83 89 108 115

900 - 18 21 28 32 32 39 47 56 66 80 86 104 112750 - 17 20 26 30 30 36 44 53 61 75 80 98 106

Quadruple Reduction

Vertical Type224▼

280

1800 - 24 28 36 41 42 51 60 72 83 102 107 131 1381500 - 22 26 34 39 39 48 57 68 79 96 102 124 1321200 - 21 24 32 36 36 44 53 64 74 90 96 116 1251000 - 19 22 30 34 34 41 50 59 69 84 90 110 118

900 - 18 21 29 33 32 39 48 57 67 81 87 106 114750 - 17 20 27 31 30 36 44 53 62 76 81 99 107

Quadruple Reduction

Upright Type224▼

280

1800 - 23 27 38 40 41 50 59 71 81 99 104 1271500 - 22 25 36 38 38 47 56 67 77 95 100 1221200 - 20 24 34 36 36 44 52 63 72 89 94 1151000 - 19 22 32 34 33 41 49 59 68 83 89 108

900 - 18 21 30 32 32 39 47 56 66 80 86 105750 - 17 20 28 30 30 36 44 53 62 75 81 98

NominalReduction

Ratio

H.SpeedShaft Speed

r/min

L.SpeedShaft Speed

r/min

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090

224


8.06.75.4

5.64.73.7

7.36.14.9

8.36.95.6

10.89.07.2

12.310.38.2

16.814.011.3

19.416.213.0

26.522.117.7

3327.922.4

4437

29.6

514334

655444

705847

1000900750

4.54.03.3

3.12.82.3

4.13.73.1

4.64.23.5

6.05.44.5

6.96.25.2

9.48.57.1

10.89.88.1

14.813.311.1

18.716.814.0

24.722.318.6

28.825.921.6

3633

27.6

3935

29.5

250


7.26.04.8

6.55.44.3

10.28.56.8

12.010.08.0

16.013.410.7

19.816.613.3

26.021.717.4

3025.620.5

4235

28.3

453830

625242

635342

1000900750

4.03.63.0

3.63.32.7

5.75.14.3

6.76.05.0

8.98.06.7

11.110.08.3

14.513.010.9

17.115.412.8

23.621.317.8

25.522.919.1

3531

26.4

3532

26.7

280


6.45.44.3

5.94.93.9

8.77.35.8

9.98.26.6

12.910.78.6

15.613.010.4

20.316.913.5

25.621.317.1

3529.623.7

3932

26.4

544536

564737

1000900750

3.63.22.7

3.33.02.5

4.94.43.7

5.54.94.1

7.26.55.4

8.77.86.5

11.310.28.5

14.312.810.7

19.817.814.9

22.019.816.5

3027.122.6

3128.323.6

DimensionTables





C - 130

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles


Fans

H.SpeedShaft Speed

r/min

NominalReduction

Ratio9095 9100 9105 9110 9115 9118 9121 9126 9128 9131 9136142 174 190 222 247 275 322 322 366 443 443 - 1800 Quadruple

ReductionHorizontal

Type224▼

280

137 169 184 215 239 265 311 311 356 430 430 - 1500130 161 176 204 227 251 296 296 341 411 411 - 1200124 154 168 195 216 239 283 283 328 395 395 - 1000120 150 163 189 210 232 275 275 319 384 384 - 900114 142 155 179 198 219 261 261 304 366 366 - 750


Vertical Type224▼

280

142 176 192 222 246 - 1500134 166 181 209 232 - 1200127 158 172 199 220 - 1000123 153 167 192 213 - 900115 144 157 181 201 - 750


Upright Type224▼

280

- 1500- 1200- 1000- 900- 750


r/min

H.SpeedShaft Speed

r/min

NominalReduction


224

847056

1028568

12410483

14211995

183152122

218182146

248207166

288241193

355297238

387323259

456381305

8.06.75.4

180015001200

474235

575143

696252

797160

1029276

12211091

138124104

161145121

198179149

216194162

255229191

4.54.03.3

1000900750


250

746250

947963

1109274

14211895

150126101

197165132

227189152

264221177

328274219

363303243

428357287

7.26.04.8

180015001200

413731

524739

615546

797159

847563

1109983

12711495

147133111

183165137

203182152

239215180

4.03.63.0

1000900750


280

675645

847056

1028568

1179878

150125100

179150120

199166133

231193155

289241193

318265212

375313251

6.45.44.3

180015001200

3734

28.5

474235

575142

655949

847563

1009075

11110083

12911697

161145121

177160133

209188157

3.63.22.7

1000900750


Upright


C - 131

PN = P750 X 750N

1.000.850.700.55

1.000.870.730.60

20304050












AmbientTemperature

NominalReduction

Ratio

H.SpeedShaft Speed

r/min

Number of Cooling

Fans

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090


Type315▼

400

1800 - 41 47 57 67 80 93 103 120 1331500 - 39 45 54 64 76 89 99 115 1281200 - 36 42 51 60 72 83 93 108 1221000 - 34 39 48 56 67 79 88 102 116

900 - 33 37 46 54 65 76 85 99 113750 - 30 35 42 50 61 71 80 93 106

Quadruple Reduction

Vertical Type315▼

400

1800 - 42 49 59 69 82 96 107 124 1391500 - 40 46 56 65 78 91 101 118 1331200 - 37 42 52 61 73 85 95 110 1251000 - 34 39 48 57 68 80 89 104 119

900 - 33 38 46 55 66 77 86 100 115750 - 31 35 43 51 61 72 81 94 108

Quadruple Reduction

Upright Type315▼

400

1800 - 41 48 58 67 81 94 104 1211500 - 39 45 55 64 77 89 99 1161200 - 36 42 51 60 72 84 93 1091000 - 34 39 48 56 68 79 88 103

900 - 33 37 46 54 65 76 85 99750 - 30 35 42 50 61 71 80 93

NominalReduction

Ratio

H.SpeedShaft Speed

r/min

L.SpeedShaft Speed

r/min

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090

315


5.74.83.8

9.27.76.2

12.810.78.6

14.011.79.4

20.917.413.9

22.318.614.9

3227.021.6

3428.923.1

484032

514334

1000900750

3.22.92.4

5.24.63.9

7.16.45.4

7.87.05.9

11.610.58.7

12.411.29.3

18.116.313.6

19.317.414.5

26.824.220.2

28.825.921.6

355


5.14.23.4

8.06.65.3

10.38.66.9

12.610.58.4

16.313.610.9

20.917.514.0

27.122.618.1

3125.920.7

4134

27.6

453730

1000900750

2.82.52.1

4.44.03.3

5.75.24.3

7.06.35.3

9.18.26.8

11.710.58.8

15.113.611.4

17.315.613.0

23.020.717.3

25.122.618.9

400


4.53.83.0

7.36.14.9

9.78.16.5

10.99.17.3

14.612.29.8

18.015.012.1

23.719.815.8

28.023.318.7

3630

24.2

4235

28.31000

900750

2.52.31.9

4.13.73.1

5.44.84.0

6.15.54.6

8.17.36.1

10.19.17.5

13.211.99.9

15.614.011.7

20.218.215.1

23.621.217.7

DimensionTables





C - 132

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles


Fans

H.SpeedShaft Speed

r/min

NominalReduction

Ratio9095 9100 9105 9110 9115 9118 9121 9126 9128 9131 9136142 172 187 215 237 260 316 316 353 433 433 - 1800 Quadruple

ReductionHorizontal

Type315▼

400

137 166 181 207 229 250 304 304 342 419 419 - 1500130 158 173 197 217 237 289 289 327 400 400 - 1200124 151 165 188 207 226 275 275 313 383 383 - 1000120 147 160 182 201 219 267 267 305 372 372 - 900113 139 152 172 190 207 253 253 289 354 354 - 750


Vertical Type315▼

400

142 172 188 214 235 - 1500134 163 178 201 222 - 1200127 154 169 191 211 - 1000122 150 164 185 204 - 900115 141 154 174 192 - 750


Upright Type315▼

400

- 1500- 1200- 1000- 900- 750


r/min

H.SpeedShaft Speed

r/min

NominalReduction


315

605040

746249

917660

998366

12410383

157131105

182152122

212177142

266222178

278232186

328274220

5.74.83.8

180015001200

3330

25.2

413731

504538

555041

696252

887966

1019176

11810689

149134112

155140117

183165138

3.22.92.4

1000900750


355

554536

655443

806753

877258

1058770

13711492

168140112

195163131

224187150

5.14.23.4

180015001200

3027.623.0

3632

27.4

454033

484336

585244

766957

938470

1099882

12511294

2.82.52.1

1000900750


400

484032

584939

705947

786552

927661

12010080

14612298

170142114

207172138

4.53.83.0

180015001200

26.824.120.1

3229.524.6

3935

29.6

433932

514638

676050

817361

958571

11510486

2.52.31.9

1000900750


Upright


C - 133

PN = P750 X 750N

1.000.850.700.55

1.000.870.730.60

20304050












AmbientTemperature

NominalReduction

Ratio

H.SpeedShaft Speed

r/min

Number of Cooling

Fans

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090


Type450▼

500

1800 - 49 67 92 1201500 - 47 64 88 1151200 - 43 59 82 1081000 - 40 56 77 102

900 - 39 53 74 98750 - 36 50 69 92

Quadruple Reduction

Vertical Type450▼

500

1800 - 50 69 94 1231500 - 48 65 89 1171200 - 44 60 83 1091000 - 41 56 78 103

900 - 39 54 75 99750 - 36 50 70 93

Quadruple Reduction

Upright Type450▼

500

1800 - 49 67 92 1201500 - 47 64 88 1151200 - 43 59 82 1081000 - 41 56 77 102

900 - 39 53 74 98750 - 36 50 69 92

NominalReduction

Ratio

H.SpeedShaft Speed

r/min

L.SpeedShaft Speed

r/min

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090

450


4.03.32.7

8.36.95.6

13.211.08.8

22.218.514.8

3227.121.7

1000900750

2.22.01.7

4.64.23.5

7.36.65.5

12.411.19.3

18.116.313.6

500


3.63.02.4

7.66.45.1

11.49.57.6

19.116.012.8

29.224.419.5

1000900750

2.01.81.5

4.23.83.2

6.35.74.8

10.79.68.0

16.314.712.2

DimensionTables

Horizontal C-160 C-162 C-162 C-162Vertical C-182 C-184 C-184 C-184Upright C-196 C-198 C-198 C-198




C - 134

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles


Fans

H.SpeedShaft Speed

r/min

NominalReduction

Ratio9095 9100 9105 9110 9115 9118 9121 9126 9128 9131 9136143 184 233 256 - 1800 Quadruple

ReductionHorizontal

Type450▼

500

138 178 225 246 - 1500131 170 213 233 - 1200125 162 203 221 - 1000121 157 196 214 - 900114 148 185 202 - 750

149 192 241 - 1800 Quadruple Reduction

Vertical Type450▼

500

143 184 231 - 1500134 174 217 - 1200127 165 206 - 1000123 160 199 - 900116 151 188 - 750


Upright Type450▼

500

- 1500- 1200- 1000- 900- 750


r/min

H.SpeedShaft Speed

r/min

NominalReduction

Ratio9095 9100 9105 9110 9115 9118 9121 9126 9128 9131 9136424.05 431.36 472.69 461.82 Exact Reduction Ratio

450

453730

635242

826955

1089072

4.03.32.7

180015001200

25.122.618.9

3531

26.6

464134

605445

2.22.01.7

1000900750


500

3.63.02.4

180015001200

2.01.81.5

1000900750

C-164 C-164 C-164 C-166 Horizontal DimensionTablesC-186 C-186 C-186 Vertical

Upright


C - 135

PN = P750 X 750N

1.000.850.700.55

1.000.870.730.60

20304050












AmbientTemperature



L.SpeedShaft

Speedr/min

Size of Reducer

9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090 9095 9100250 11.8 17.7 17.7 29.4 29.9 32.4 37.8 46.6 39.7 49.1 44.1 77.0 77.0 100.1 100.1 137.8 139.8160 11.8 17.7 20.1 31.4 32.4 33.8 39.7 48.1 41.7 50.5 46.1 89.0 89.0 108.9 108.9 145.7 157.5100 11.8 17.7 25.0 35.3 38.7 39.2 47.1 53.5 47.6 54.4 54.4 99.0 99.0 122.1 122.1 147.6 166.3

63 11.8 17.7 26.5 35.3 42.2 47.1 54.9 62.3 58.9 64.3 65.2 131.5 131.5 125.6 125.6 143.7 165.340 11.8 17.7 26.5 35.3 42.2 49.1 54.9 67.7 71.1 78.0 79.0 141.0 141.0 125.1 125.1 137.8 164.825 11.8 17.7 26.5 35.3 42.2 49.1 54.9 67.7 81.4 95.2 99.1 139.5 139.5 122.6 122.6 135.4 163.3

250 71.1 93.7 70.1 122.5 122.5 141.8 141.8 158.9 181.0160 78.0 94.7 77.5 137.5 137.5 132.4 132.4 151.6 174.6100 81.4 98.1 92.2 149.5 149.5 127.0 127.0 147.6 166.863 81.4 98.1 114.8 149.0 149.0 125.6 125.6 143.7 165.840 81.4 98.1 117.7 148.5 148.5 125.1 125.1 137.8 165.325 81.4 98.1 117.7 147.0 147.0 122.6 122.6 135.4 163.8

L.SpeedShaft

Speedr/min

Size of Reducer

9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090 9095 9100250 8.3 15.2 9.8 21.6 19.1 21.6 22.6 31.4 16.7 28.4 17.2 44.0 44.0 58.4 58.4 97.6 80.4160 9.8 17.7 12.3 23.1 20.6 23.1 24.0 31.4 18.1 27.0 17.7 55.5 55.5 64.3 64.3 103.0 96.1100 11.8 17.7 16.7 29.4 26.0 27.5 28.4 35.3 22.1 30.4 25.5 63.5 63.5 74.6 74.6 110.9 105.963 11.8 17.7 21.6 35.3 32.9 35.3 37.3 42.7 33.4 38.3 33.8 95.0 95.0 104.5 104.5 148.1 153.540 11.8 17.7 26.5 35.3 41.7 43.7 48.6 55.4 45.1 51.5 47.6 129.0 129.0 146.7 146.7 172.2 203.625 11.8 17.7 26.5 35.3 42.2 49.1 54.9 67.7 60.8 68.7 67.7 167.0 167.0 171.2 171.2 171.2 215.3

250 46.1 74.6 40.2 90.0 90.0 114.8 114.8 156.0 150.6160 52.0 72.1 45.6 103.5 103.5 125.1 125.1 164.8 170.7100 60.3 79.0 59.4 116.0 116.0 140.8 140.8 176.1 187.463 81.4 96.6 80.0 152.5 152.5 174.1 174.1 186.9 218.840 81.4 98.1 108.9 192.0 192.0 191.8 191.8 193.7 241.825 81.4 98.1 117.7 180.5 180.5 171.2 171.2 171.2 214.8

L.SpeedShaft

Speedr/min

Size of Reducer

9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090 9095 9100250 9.3 11.4 14.7 23.1 26.5 31.4 32.9 31.9 27.0 43.2 28.0 28.0 23.5 23.5 31.4 52.0 45.1160 9.3 11.4 18.1 23.1 28.4 31.4 33.4 31.9 28.9 43.2 28.4 28.4 27.5 27.5 34.3 53.0 53.0100 9.3 11.4 24.5 23.1 32.9 31.4 37.3 31.9 34.3 43.2 39.7 39.7 32.9 32.9 43.2 59.4 58.463 9.3 11.4 26.5 23.1 32.9 31.4 37.3 31.9 49.1 43.2 52.5 52.5 45.6 45.6 54.0 59.8 81.440 9.3 11.4 26.5 23.1 32.9 31.4 37.3 31.9 49.1 43.2 61.4 61.4 63.3 60.3 59.8 59.8 83.425 9.3 11.4 26.5 23.1 32.9 31.4 37.3 31.9 49.1 43.2 61.4 61.4 67.7 60.3 59.8 59.8 83.4

250 23.1 34.8 18.6 18.6 56.9 56.9 59.8 59.8 83.4160 25.0 33.4 21.1 21.1 56.9 56.9 59.8 59.8 83.4100 29.4 36.8 27.5 27.5 56.9 56.9 59.8 59.8 83.463 39.2 43.2 36.3 36.3 56.9 56.9 59.8 59.8 83.440 39.2 43.2 49.1 49.1 56.9 56.9 59.8 59.8 83.425 39.2 43.2 56.9 56.9 56.9 56.9 59.8 59.8 83.4

Applicable to configurations: RL, LR, BL

Applicable to configurations: RR, LL, BR

Sheet 1

Sheet 2


Heavyduty

bearingmodel


Heavyduty

bearingmodel


Heavyduty

bearingmodel

SELECTION Allowable Radial and Axial Loads on Slow Speed Parallel shaft

C - 136

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

Unit: kN


ShaftSpeedr/min9105 9110 9115 9118 9121 9126 9128 9131 9136

192.3 167.8 222.7 250200.6 174.1 234.9 160183.9 184.9 245.7 391.9 352.7 330.6 315.4 403.2 391.9 100178.1 190.8 303.1 387.5 369.3 341.4 328.6 462.5 430.7 63173.6 194.7 320.8 460.1 449.3 401.2 409.6 572.4 511.1 40167.3 184.9 316.4 448.3 554.8 497.4 534.6 733.8 638.6 25213.9 250.6 316.9 250200.6 214.8 334.5 160183.9 195.2 340.9 100178.1 190.8 333.5 63173.6 194.7 320.8 40167.3 184.9 316.4 25


ShaftSpeedr/min9105 9110 9115 9118 9121 9126 9128 9131 9136

50.0 50.0 76.5 25049.5 49.5 76.5 16054.0 54.0 83.4 119.7 121.6 116.7 91.2 113.3 107.9 10074.6 74.6 83.4 119.7 121.6 121.6 96.6 140.3 122.6 6383.4 83.4 83.4 119.7 121.6 121.6 134.9 191.3 155.5 4083.4 83.4 83.4 119.7 121.6 121.6 144.2 192.3 192.3 2583.4 83.4 83.4 25083.4 83.4 83.4 16083.4 83.4 83.4 10083.4 83.4 83.4 6383.4 83.4 83.4 4083.4 83.4 83.4 25

Unit: kN



Consult us when a load is not in the center. 2. Consult us for the blanks in the table. 3. Consult us when the radial load is applied upward. 4. In case of double projection shaft (RB, LB, BB)







Flat Belt 2.5

RB LB

1

1

12

2

2BB


Heavyduty

bearingmodel


Heavyduty

bearingmodel


Unit: kN


ShaftSpeedr/min9105 9110 9115 9118 9121 9126 9128 9131 9136

131.5 94.2 152.5 250138.3 92.2 155.0 160146.7 101.0 167.3 312.0 228.1 197.7 159.4 203.6 190.3 100200.1 144.7 220.7 292.3 244.3 206.0 170.7 260.9 218.8 63235.4 199.1 250.2 373.3 322.7 257.0 250.2 369.3 286.5 40304.1 272.7 353.2 460.1 427.2 348.7 373.3 528.3 398.3 25213.4 191.3 248.7 250223.2 197.7 261.4 160236.9 210.4 274.2 100301.7 267.8 341.9 63304.1 323.7 382.1 40304.1 323.7 374.7 25


Heavyduty

bearingmodel

C - 137

L.SpeedShaft

Speedr/min

Size of Reducer

9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090 9095 9100250 1200 1800 1800 3000 3050 3300 3850 4750 4050 5000 4500 7850 7850 10200 10200 14050 14250160 1200 1800 2050 3200 3300 3450 4050 4900 4250 5150 4700 9050 9050 11100 11100 14850 16050100 1200 1800 2550 3600 3950 4000 4800 5450 4850 5550 5550 10100 10100 12450 12450 15050 16950

63 1200 1800 2700 3600 4300 4800 5600 6350 6000 6550 6650 13400 13400 12800 12800 14650 1685040 1200 1800 2700 3600 4300 5000 5600 6900 7250 7950 8050 14350 14350 12750 12750 14050 1680025 1200 1800 2700 3600 4300 5000 5600 6900 8300 9700 10100 14200 14200 12500 12500 13800 16650

250 7250 9550 7150 12500 12500 14450 14450 16200 18450160 7950 9650 7900 14000 14000 13500 13500 15450 17800100 8300 10000 9400 15250 15250 12950 12950 15050 1700063 8300 10000 11700 15200 15200 12800 12800 14650 1690040 8300 10000 12000 15150 15150 12750 12750 14050 1685025 8300 10000 12000 15000 15000 12500 12500 13800 16700

L.SpeedShaft

Speedr/min

Size of Reducer

9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090 9095 9100250 850 1550 1000 2200 1950 2200 2300 3200 1700 2900 1750 4500 4500 5950 5950 9950 8200160 1000 1800 1250 2350 2100 2350 2450 3200 1850 2750 1800 5650 5650 6550 6550 10500 9800100 1200 1800 1700 3000 2650 2800 2900 3600 2250 3100 2600 6450 6450 7600 7600 11300 10800

63 1200 1800 2200 3600 3350 3600 3800 4350 3400 3900 3450 9700 9700 10650 10650 15100 1565040 1200 1800 2700 3600 4250 4450 4950 5650 4600 5250 4850 13150 13150 14950 14950 17550 2075025 1200 1800 2700 3600 4300 5000 5600 6900 6200 7000 6900 17000 17000 17450 17450 17450 21950

250 4700 7600 4100 9150 9150 11700 11700 15900 15350160 5300 7350 4650 10550 10550 12750 12750 16800 17400100 6150 8050 6050 11800 11800 14350 14350 17950 1910063 8300 9850 8150 15550 15550 17750 17750 19050 2230040 8300 10000 11100 19550 19550 19550 19550 19750 2465025 8300 10000 12000 18400 18400 17450 17450 17450 21900

L.SpeedShaft

Speedr/min

Size of Reducer

9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090 9095 9100250 950 1160 1500 2350 2700 3200 3350 3250 2750 4400 2850 2850 2400 2400 3200 5300 4600160 950 1160 1850 2350 2900 3200 3400 3250 2950 4400 2900 2900 2800 2800 3500 5400 5400100 950 1160 2500 2350 3350 3200 3800 3250 3500 4400 4050 4050 3350 3350 4400 6050 595063 950 1160 2700 2350 3350 3200 3800 3250 5000 4400 5350 5350 4650 4650 5500 6100 830040 950 1160 2700 2350 3350 3200 3800 3250 5000 4400 6260 6260 6450 6150 6100 6100 850025 950 1160 2700 2350 3350 3200 3800 3250 5000 4400 6260 6260 6900 6150 6100 6100 8500

250 2350 3550 1900 1900 5800 5800 6100 6100 8500160 2550 3400 2150 2150 5800 5800 6100 6100 8500100 3000 3750 2800 2800 5800 5800 6100 6100 850063 4000 4400 3700 3700 5800 5800 6100 6100 850040 4000 4400 5000 5000 5800 5800 6100 6100 850025 4000 4400 5800 5800 5800 5800 6100 6100 8500


Heavyduty

bearingmodel


Heavyduty

bearingmodel


Heavyduty

bearingmodel




Applicable to configurations: RL, LR, BLSheet 1

Sheet 2 Applicable to configurations: RR, LL, BR

C - 138

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

Unit: kgf

Unit: kgf

Unit: kgf

RB LB

1

1

12

2

2BB


ShaftSpeedr/min9105 9110 9115 9118 9121 9126 9128 9131 9136

19600 17100 22700 25020450 17750 23950 16018750 18850 25050 39950 35950 33700 32150 41100 39950 10018150 19450 30900 39500 37650 34800 33500 47150 43900 6317700 19850 32700 46900 45800 40900 41750 58350 52100 4017050 18850 32250 45700 56550 50700 54500 74800 65100 2521800 25550 32300 25020450 21900 34100 16018750 19900 34750 10018150 19450 34000 6317700 19850 32700 4017050 18850 32250 25


ShaftSpeedr/min9105 9110 9115 9118 9121 9126 9128 9131 9136

13400 9600 15550 25014100 9400 15800 16014950 10300 17050 31800 23250 20150 16250 20750 19400 10020400 14750 22500 29800 24900 21000 17400 26600 22300 6324000 20300 25500 38050 32900 26200 25500 37650 29200 4031000 27800 36000 46900 43550 35550 38050 53850 40600 2521750 19500 25350 25022750 20150 26650 16024150 21450 27950 10030750 27300 34850 6331000 33000 38950 4031000 33000 38200 25


ShaftSpeedr/min9105 9110 9115 9118 9121 9126 9128 9131 9136

5100 5100 7800 2505050 5050 7800 1605500 5500 8500 12200 12400 11900 9300 11550 11000 1007600 7600 8500 12200 12400 12400 9850 14300 12500 638500 8500 8500 12200 12400 12400 13750 19500 15850 408500 8500 8500 12200 12400 12400 14700 19600 19600 258500 8500 8500 2508500 8500 8500 1608500 8500 8500 1008500 8500 8500 638500 8500 8500 408500 8500 8500 25




Flat Belt 2.5



Consult us when a load is not in the center. 2. Consult us for the blanks in the table. 3. Consult us when the radial load is applied upward. 4. In case of double projection shaft (RB, LB, BB)





Heavyduty

bearingmodel


Heavyduty

bearingmodel


Heavyduty

bearingmodel


C - 139

NominalReduction

Ratio

H.SpeedShaft

Speedr/min

Size of Reducer

9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090 9095 91001800 2.0 2.9 2.0 2.0 2.9 2.9 3.4 3.4 3.4 3.4 2.9 2.9 6.4 6.4 15.2 15.2 17.21500 2.0 2.9 2.0 2.0 2.9 2.9 3.4 3.4 3.9 3.9 2.9 2.9 7.8 7.8 15.2 15.2 17.21200 2.0 2.9 2.0 2.0 2.9 2.9 3.4 3.4 4.9 4.9 5.4 5.4 9.8 9.8 14.7 14.7 17.21000 2.0 2.9 2.0 2.0 2.9 2.9 3.4 3.4 5.4 5.4 5.9 5.9 10.8 10.8 14.7 14.7 17.2

900 2.0 2.9 2.0 2.0 2.9 2.9 3.4 3.4 5.9 5.9 6.4 6.4 10.8 10.8 14.7 14.2 17.2750 2.0 2.9 2.0 2.0 2.9 2.9 3.4 3.4 6.4 6.4 7.4 7.4 10.8 10.8 14.7 14.2 17.2

1800 2.0 2.9 2.5 2.5 2.9 2.9 3.9 3.9 5.4 5.4 5.9 5.9 9.8 9.8 16.7 16.2 19.61500 2.0 2.9 2.5 2.5 2.9 2.9 3.9 3.9 5.9 5.9 6.9 6.9 11.8 11.8 16.7 16.2 19.61200 2.0 2.9 2.5 2.5 2.9 2.9 3.9 3.9 6.9 6.9 7.8 7.8 12.3 12.3 16.7 16.2 19.61000 2.0 2.9 2.5 2.5 2.9 2.9 3.9 3.9 7.4 7.4 8.8 8.8 12.3 12.3 16.7 15.7 19.6

900 2.0 2.9 2.5 2.5 2.9 2.9 3.9 3.9 7.8 7.8 9.3 9.3 12.3 12.3 16.7 15.7 19.6750 2.0 2.9 2.5 2.5 2.9 2.9 3.9 3.9 7.8 7.8 9.8 9.8 12.3 12.3 16.7 15.7 19.6

1800 2.9 2.9 3.9 3.9 4.4 4.4 8.8 8.8 9.8 9.8 14.2 14.2 17.7 17.2 21.61500 2.9 2.9 3.9 3.9 4.4 4.4 9.3 9.3 10.8 10.8 16.2 16.2 17.7 17.2 21.61200 2.9 2.9 3.9 3.9 4.4 4.4 9.3 9.3 11.3 11.3 16.2 16.2 17.7 17.2 21.61000 2.9 2.9 3.9 3.9 4.4 4.4 9.3 9.3 11.3 11.3 16.2 16.2 17.7 17.2 21.6

900 2.9 2.9 3.9 3.9 4.4 4.4 9.3 9.3 11.3 11.3 16.2 16.2 17.7 17.2 21.6750 2.9 2.9 3.9 3.9 4.4 4.4 9.3 9.3 11.3 11.3 16.2 16.2 17.7 17.2 21.6

NominalReduction

Ratio

H.SpeedShaft

Speedr/min

Size of Reducer

9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090 9095 91001800 2.5 3.4 1.5 1.5 2.5 2.5 2.5 2.5 26.5 26.5 29.41500 2.5 3.4 3.9 3.9 2.5 2.5 3.9 3.9 28.0 28.0 31.41200 2.5 2.9 3.4 3.4 3.9 3.9 8.8 8.8 30.4 30.4 35.81000 2.5 2.9 3.4 3.4 3.9 3.9 20.6 20.6 33.4 33.8 41.2

900 2.5 2.9 3.4 3.4 3.9 3.9 24.0 24.0 35.8 34.8 44.6750 2.5 2.9 3.4 3.4 4.4 4.4 26.0 26.0 38.3 35.8 47.6

1800 2.9 3.4 3.9 3.9 2.0 2.0 12.8 12.8 28.9 28.4 33.81500 2.9 3.4 3.9 3.9 3.4 3.4 5.4 5.4 5.9 5.9 24.0 24.0 31.9 30.4 38.71200 2.9 3.4 3.9 3.9 6.9 6.9 2.5 2.5 11.8 11.8 16.2 16.2 29.4 29.4 36.8 34.3 45.11000 2.9 3.4 3.9 3.9 8.3 8.3 5.9 5.9 12.8 12.8 23.1 23.1 29.4 29.4 41.7 37.8 50.5

900 2.9 3.4 3.9 3.9 8.3 8.3 7.4 7.4 12.8 12.8 24.5 24.5 28.9 28.9 43.7 39.2 54.0750 2.9 3.4 3.9 3.9 8.3 8.3 10.3 10.3 12.8 12.8 24.5 24.5 28.9 28.9 46.1 40.2 57.4

1800 2.9 3.9 4.4 4.4 8.3 8.3 8.8 8.8 8.8 8.8 10.8 10.8 25.0 25.0 32.9 29.4 40.21500 2.9 3.9 4.4 4.4 8.8 8.8 11.8 11.8 13.2 13.2 19.1 19.1 25.0 25.0 37.3 31.9 45.11200 2.9 3.9 4.4 4.4 8.8 8.8 11.8 11.8 13.2 13.2 25.0 25.0 25.0 25.0 42.2 35.8 51.51000 2.9 3.9 4.4 4.4 8.8 8.8 11.8 11.8 13.2 13.2 25.0 25.0 25.0 25.0 47.1 39.2 56.9

900 2.9 3.9 4.4 4.4 8.8 8.8 11.8 11.8 13.2 13.2 25.0 25.0 25.0 25.0 49.1 40.7 60.3750 2.9 3.9 4.4 4.4 8.8 8.8 11.8 11.8 13.2 13.2 25.0 25.0 25.0 25.0 51.5 42.7 63.8

6.3▼

8

9▼

10

11.2▼

22.4

NominalReduction

Ratio

H.SpeedShaft

Speedr/min

Size of Reducer

9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090 9095 91001800 2.0 2.0 2.9 2.9 2.5 2.5 3.4 3.4 3.9 3.9 4.9 4.9 15.2 15.2 21.11500 2.0 2.0 2.9 2.9 2.5 2.5 3.4 3.4 3.9 3.9 4.9 4.9 15.2 15.2 21.11200 2.0 2.0 2.9 2.9 2.5 2.5 3.4 3.4 3.9 3.9 4.9 4.9 15.2 15.2 21.11000 2.0 2.0 2.9 2.9 2.5 2.5 3.4 3.4 3.9 3.9 4.9 4.9 15.2 15.2 21.1

900 2.0 2.0 2.9 2.9 2.5 2.5 3.4 3.4 3.9 3.9 4.9 4.9 15.2 15.2 21.1750 2.0 2.0 2.9 2.9 2.5 2.5 3.4 3.4 3.9 3.9 4.9 4.9 15.2 15.2 21.1

80▼

500

20▼

25

28▼

50

56▼

90

Double Reduction (kN)

Triple Reduction(kN)

Quadruple Reduction(kN)

SELECTION Allowable Radial Load on High Speed Shaft Parallel shaft

C - 140

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles


ShaftSpeedr/min

NominalReduction

Ratio9105 9110 9115 9118 9121 9126 9128 9131 913629.4 43.7 43.2 180031.4 46.1 45.6 150033.4 49.1 49.1 120036.8 53.0 53.0 100038.7 55.9 55.9 90042.2 59.4 59.4 75031.4 48.1 47.1 180033.4 52.5 50.0 150037.3 58.4 55.4 120041.7 63.8 60.3 100045.1 66.7 63.8 90048.6 71.6 67.2 75032.4 54.4 48.1 180035.3 59.4 52.0 150040.2 65.7 58.4 120045.6 71.1 63.3 100049.1 74.6 66.7 90052.5 80.4 70.1 750

6.3▼

8

9▼

10

11.2▼

22.4


ShaftSpeedr/min

NominalReduction

Ratio9105 9110 9115 9118 9121 9126 9128 9131 913616.7 12.3 12.3 4.9 16.2 13.7 180016.7 11.8 11.8 4.9 24.5 18.6 150016.2 10.8 10.8 5.4 34.8 24.5 120016.2 10.3 10.3 5.4 44.1 29.9 100016.2 10.3 9.8 7.8 50.0 33.4 90016.2 9.8 9.8 10.3 59.4 38.7 75018.6 12.8 14.7 4.9 10.3 4.4 29.9 23.5 180018.6 12.3 14.2 8.8 15.2 6.4 3.9 38.3 28.4 150018.6 12.3 13.7 17.2 22.1 10.3 11.3 49.1 34.8 120018.1 12.3 13.2 17.7 28.0 13.7 17.7 58.4 40.7 100018.1 12.3 13.2 17.7 31.4 16.7 21.1 64.3 44.1 90018.1 12.3 12.8 17.7 34.8 20.6 25.5 73.6 50.5 75020.6 17.2 11.8 26.5 28.9 17.7 21.6 52.0 26.0 180020.6 17.2 10.8 26.5 33.8 22.6 27.5 51.5 25.5 150020.6 17.2 10.8 26.5 38.3 25.0 34.8 51.0 25.0 120020.6 17.2 10.8 26.5 37.8 25.0 41.2 50.5 24.0 100020.6 17.2 10.8 26.5 37.8 25.0 45.1 50.5 24.0 90020.6 16.7 10.3 26.5 37.8 24.5 49.5 50.0 23.5 750

20▼

25

28▼

50

56▼

90


ShaftSpeedr/min

NominalReduction

Ratio9105 9110 9115 9118 9121 9126 9128 9131 913621.1 21.1 21.1 17.7 24.5 23.1 34.3 34.3 26.5 180021.1 21.1 21.1 24.5 24.5 22.6 34.3 39.2 26.0 150021.1 21.1 21.1 27.5 24.5 22.6 34.3 39.2 26.0 120021.1 21.1 21.1 28.9 24.5 22.6 35.8 39.2 26.0 100021.1 21.1 21.1 29.9 24.5 22.6 34.3 39.2 25.5 90021.1 21.1 21.1 30.4 24.5 22.6 34.3 39.2 25.5 750

80▼

500

Unit: kN

Unit: kN

Unit: kN








Flat Belt 2.5

C - 141

NominalReduction

Ratio

H.SpeedShaft

Speedr/min

Size of Reducer

9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090 9095 91001800 250 350 150 150 250 250 250 250 2700 2700 30001500 250 350 400 400 250 250 400 400 2850 2850 32001200 250 300 350 350 400 400 900 900 3100 3100 36501000 250 300 350 350 400 400 2100 2100 3400 3450 4200

900 250 300 350 350 400 400 2450 2450 3650 3550 4550750 250 300 350 350 450 450 2650 2650 3900 3650 4850

1800 300 350 400 400 200 200 1300 1300 2950 2900 34501500 300 350 400 400 350 350 550 550 600 600 2450 2450 3250 3100 39501200 300 350 400 400 700 700 250 250 1200 1200 1650 1650 3000 3000 3750 3500 46001000 300 350 400 400 850 850 600 600 1300 1300 2350 2350 3000 3000 4250 3850 5150

900 300 350 400 400 850 850 750 750 1300 1300 2500 2500 2950 2950 4450 4000 5500750 300 350 400 400 850 850 1050 1050 1300 1300 2500 2500 2950 2950 4700 4100 5850

1800 300 400 450 450 850 850 900 900 900 900 1100 1100 2550 2550 3350 3000 41001500 300 400 450 450 900 900 1200 1200 1350 1350 1950 1950 2550 2550 3800 3250 46001200 300 400 450 450 900 900 1200 1200 1350 1350 2550 2550 2550 2550 4300 3650 52501000 300 400 450 450 900 900 1200 1200 1350 1350 2550 2550 2550 2550 4800 4000 5800

900 300 400 450 450 900 900 1200 1200 1350 1350 2550 2550 2550 2550 5000 4150 6150750 300 400 450 450 900 900 1200 1200 1350 1350 2550 2550 2550 2550 5250 4350 6500

NominalReduction

Ratio

H.SpeedShaft

Speedr/min

Size of Reducer

9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090 9095 91001800 200 300 200 200 300 300 350 350 350 350 300 300 650 650 1550 1550 17501500 200 300 200 200 300 300 350 350 400 400 300 300 800 800 1550 1550 17501200 200 300 200 200 300 300 350 350 500 500 550 550 1000 1000 1500 1500 17501000 200 300 200 200 300 300 350 350 550 550 600 600 1100 1100 1500 1500 1750

900 200 300 200 200 300 300 350 350 600 600 650 650 1100 1100 1500 1450 1750750 200 300 200 200 300 300 350 350 650 650 750 750 1100 1100 1500 1450 1750

1800 200 300 250 250 300 300 400 400 550 550 600 600 1000 1000 1700 1650 20001500 200 300 250 250 300 300 400 400 600 600 700 700 1200 1200 1700 1650 20001200 200 300 250 250 300 300 400 400 700 700 800 800 1250 1250 1700 1650 20001000 200 300 250 250 300 300 400 400 750 750 900 900 1250 1250 1700 1600 2000

900 200 300 250 250 300 300 400 400 800 800 950 950 1250 1250 1700 1600 2000750 200 300 250 250 300 300 400 400 800 800 1000 1000 1250 1250 1700 1600 2000

1800 300 300 400 400 450 450 900 900 1000 1000 1450 1450 1800 1750 22001500 300 300 400 400 450 450 950 950 1100 1100 1650 1650 1800 1750 22001200 300 300 400 400 450 450 950 950 1150 1150 1650 1650 1800 1750 22001000 300 300 400 400 450 450 950 950 1150 1150 1650 1650 1800 1750 2200

900 300 300 400 400 450 450 950 950 1150 1150 1650 1650 1800 1750 2200750 300 300 400 400 450 450 950 950 1150 1150 1650 1650 1800 1750 2200

NominalReduction

Ratio

H.SpeedShaft

Speedr/min

Size of Reducer

9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085 9090 9095 91001800 200 200 300 300 250 250 350 350 400 400 500 500 1550 1550 21501500 200 200 300 300 250 250 350 350 400 400 500 500 1550 1550 21501200 200 200 300 300 250 250 350 350 400 400 500 500 1550 1550 21501000 200 200 300 300 250 250 350 350 400 400 500 500 1550 1550 2150

900 200 200 300 300 250 250 350 350 400 400 500 500 1550 1550 2150750 200 200 300 300 250 250 350 350 400 400 500 500 1550 1550 2150

6.3▼

8

9▼

10

20▼

25

28▼

50

56▼

90

80▼

500

11.2▼

22.4

Double Reduction (kgf)

Triple Reduction(kgf)

Quadruple Reduction(kgf)


C - 142

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

Unit: kgf


ShaftSpeedr/min

NominalReduction

Ratio9105 9110 9115 9118 9121 9126 9128 9131 91363000 4450 4400 18003200 4700 4650 15003400 5000 5000 12003750 5400 5400 10003950 5700 5700 9004300 6050 6050 7503200 4900 4800 18003400 5350 5100 15003800 5950 5650 12004250 6500 6150 10004600 6800 6500 9004950 7300 6850 7503300 5550 4900 18003600 6050 5300 15004100 6700 5950 12004650 7250 6450 10005000 7600 6800 9005350 8200 7150 750


ShaftSpeedr/min

NominalReduction

Ratio9105 9110 9115 9118 9121 9126 9128 9131 91361700 1250 1250 500 1650 1400 18001700 1200 1200 500 2500 1900 15001650 1100 1100 550 3550 2500 12001650 1050 1050 550 4500 3050 10001650 1050 1000 800 5100 3400 9001650 1000 1000 1050 6050 3950 7501900 1300 1500 500 1050 450 3050 2400 18001900 1250 1450 900 1550 650 400 3900 2900 15001900 1250 1400 1750 2250 1050 1150 5000 3550 12001850 1250 1350 1800 2850 1400 1800 5950 4150 10001850 1250 1350 1800 3200 1700 2150 6550 4500 9001850 1250 1300 1800 3550 2100 2600 7500 5150 7502100 1750 1200 2700 2950 1800 2200 5300 2650 18002100 1750 1100 2700 3450 2300 2800 5250 2600 15002100 1750 1100 2700 3900 2550 3550 5200 2550 12002100 1750 1100 2700 3850 2550 4200 5150 2450 10002100 1750 1100 2700 3850 2550 4600 5150 2450 9002100 1700 1050 2700 3850 2500 5050 5100 2400 750


ShaftSpeedr/min

NominalReduction

Ratio9105 9110 9115 9118 9121 9126 9128 9131 91362150 2150 2150 1800 2500 2350 3500 3500 2700 18002150 2150 2150 2500 2500 2300 3500 4000 2650 15002150 2150 2150 2800 2500 2300 3500 4000 2650 12002150 2150 2150 2950 2500 2300 3650 4000 2650 10002150 2150 2150 3050 2500 2300 3500 4000 2600 9002150 2150 2150 3100 2500 2300 3500 4000 2600 750

Unit: kgf

Unit: kgf

80▼

500

6.3▼

8

9▼

10

11.2▼

22.4

20▼

25

28▼

50

56▼

90




Flat Belt 2.5





C - 143


C - 144

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

Unit: mm


9015 295 160 194 90 135 270 309 299 129 70 22 15 95 440 170 205 3009025 346 175 227 95 155 310 346 339 142 80 25 19 110 505 195 235 3459030 406 200 264 110 160 320 353 349 154 90 28 24 120 590 215 265 4109035 437 219 295 129 185 370 399 154 90 28 24 120 640 215 265 4609040 467 235 306 120 200 400 431 172 115 30 28 150 685 255 315 4559045 506 256 345 141 220 440 471 172 115 30 28 150 745 255 315 5159050 537 255 358 138.5 210 420 451 192 116.5 32 28 150 775 285 345 5429055 576 286 397 171 245 490 521 192 115 32 28 150 845 285 345 615

SizeHigh Speed Shaft Fan

RC1 RC2 Wt.kg

OilQty.

LQ QR R S W2/DepthKey


9015 131 211 80 30k6 M10/22 8 4 7 70 129 125 50 30 3/4" 3/4" 100 59025 146 226 80 35k6 M12/28 10 5 8 70 143 140 50 30 3/4" 3/4" 140 79030 159 269 110 40k6 M16/36 12 5 8 95 169 140 80 52 3/4" 3/4" 195 109035 159 269 110 40k6 M16/36 12 5 8 95 169 140 80 52 3/4" 3/4" 215 129040 174 284 110 50k6 M16/36 14 5.5 9 95 188 160 80 52 1" 1" 285 169045 174 284 110 50k6 M16/36 14 5.5 9 95 188 160 80 52 1" 1" 345 189050 193 303 110 55m6 M20/42 16 6 10 95 208 160 80 52 1" 1" 415 219055 193 303 110 55m6 M20/42 16 6 10 95 208 160 80 52 1" 1" 475 28

QR

FDFC

FBFA

C

L2 RQ

QR

E

OP

H

B A

KD

G Y GL

K4- J

E1F

HL

RC1

RC2

RC1

E2

FY

Z2

W2

Y2 X2

S

High Speed Shaft

3. Refer to the page D-12 for dimensions shown in these drawings.

4. Refer to the page D -24 for the dimension of optional parts.5

DIMENSIONS Parallel Shaft Double Reduction Horizontal Mounting 9015 9055


[Fig. 1]Location of oil fi l l and air vent for Size 9015~9030 with reduction ratio 6.3 or 7.1

※ Location of oil fi l l and air vent changes for Size 9015~9030 with reduction ratio 6.3 or 7.1. Refer to Fig. 1.

H

L

RL RR RB LR LL LB BL BR BB

Nomenclature


Slow Speed Shaft



L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2

C - 145

Air Breather Dip Stick Backstop(Option)

OppositeSide

Oil PumpInspectionCover

Oil GaugeDrain PlugOil FillAir Vent

P H A P 2 - - Fan

RLRRRBLRLLLBBLBRBB

90159025903090359040904590509055

PH

AP

90159055

2PARAMAX

HorizontalMonoblock

ParallelDouble

Reduction






90159025903090359040904590509055

ShaftArrangement

Low Speed ShaftType


(blank)T

K



Size

Unit: mm


(blank)F



C - 146

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

QR

FA

FD FC

FB

EH

OP

C

L2 RQ

RQ

G

KD

Y G

K4- J

B A

FE

1E

2

FY

RC

L

Z2

W2

Y2 X2

S

High Speed Shaft

Unit: mm

3


9060 621 299 414 151 265 530 183 578 212 135 35 35 180 885 310 380 6159065 667 338 460 190 300 600 148 648 212 135 35 35 180 970 310 380 7009070 719 336 482 163 300 600 213 648 237 160 40 42 215 1020 350 430 7009075 772 383 535 210 335 670 178 718 237 160 52 42 220 1120 350 430 8009080 812 378 556 205 335 670 233 718 257 160 52 42 220 1155 380 460 8359085 868 422 612 249 375 750 193 798 257 160 52 42 220 1255 380 460 935


RC Wt.kg

OilQty.



9060 220 360 140 65m6 M20/42 18 7 11 125 240 200 105 65 1" 610 259065 220 360 140 65m6 M20/42 18 7 11 125 240 200 105 65 1" 735 299070 245 385 140 75m6 M20/42 20 7.5 12 125 274 225 105 65 1" 860 389075 245 385 140 75m6 M20/42 20 7.5 12 125 274 225 105 65 1" 1110 479080 264 434 170 85m6 M20/42 22 9 14 150 296 225 135 95 1" 1240 549085 264 434 170 85m6 M20/42 22 9 14 150 296 225 135 95 1" 1500 68

4 Refer to the page D -14 for dimensions not shown in these drawings.5 Refer to the page D -27 for the dimension of optional parts.


With Fan


H

L


Nomenclature


Slow Speed Shaft



L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2

C - 147


OppositeSide



P H D P 2 - -

RLRRRBLRLLLBBLBRBB

906090659070907590809085

PH

DP

90609085

2PARAMAX

HorizontalSplit

ParallelDouble

Reduction

Unit: mm




9060 440 230 210 125m6 M24/50 32 11 18 185 583 353 230 128 125 470 235 235 125 1239065 484 234 250 140m6 M30/60 36 12 20 225 594 359 235 143 140 480 240 240 145 1439070 509 259 250 145m6 M30/60 36 12 20 225 644 384 260 148 145 530 265 265 145 1439075 562 262 300 160m6 M30/60 40 13 22 275 651 386 265 158 155 530 265 265 150 1489080 582 282 300 165m6 M30/60 40 13 22 275 714 429 285 173 170 570 285 285 165 1639085 585 285 300 175m6 M30/60 45 15 25 270 714 429 285 183 180 570 285 285 175 173


906090659070907590809085

(blank)F


SizeShaft

Arrangement

Low Speed ShaftType


(blank)T

K





C - 148

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

FAFB

FCQ

R

FD

C

L2 RQ

RQ

6- J

A

B

F E1

K1

GD

Y Y GL

K3K2

E2

RC

EH

OP

Z2

W2

Y2 X2

S

B (9090 9100)

(9105 9115)




9090 1070 428 640 345 375 750 274 797 60 50 42 270 250 210 1440 480 570 6609095 1100 458 670 375 400 800 286 847 60 50 42 290 250 210 1500 480 570 6909100 1204 468 724 375 425 850 299 897 70 55 48 300 280 240 1610 560 650 7359105 1238 493 758 410 450 900 316 947 70 55 48 320 280 240 1680 560 650 7709110 1354 508 824 420 475 950 321 997 75 60 56 340 310 260 1810 610 710 8309115 1403 558 873 470 500 1000 333 1047 75 60 56 350 310 260 1910 610 710 880


RC Wt.kg

OilQty.



9090 330 500 170 90m6 M24/50 25 9 14 150 465 250 135 90 1 1/2" 2050 1209095 330 500 170 90m6 M24/50 25 9 14 150 465 250 135 90 1 1/2" 2300 1409100 375 585 210 100m6 M24/50 28 10 16 190 515 250 175 130 1 1/2" 2730 1709105 375 585 210 100m6 M24/50 28 10 16 190 515 250 175 130 1 1/2" 3290 2059110 405 615 210 110m6 M24/50 28 10 16 190 565 250 175 130 1 1/2" 3960 2409115 405 615 210 110m6 M24/50 28 10 16 190 565 250 175 130 1 1/2" 4410 290

Unit: mm




H

L


Nomenclature


L1U1

TU1T1

V1

W1

Z1Y1

X1

TU2U2 T2

V3V2

Slow Speed Shaft


Refer to the page D -18 for details.

C - 149


OppositeSide



P H D P 2 - -

RLRRRBLRLLLBBLBRBB

909090959100910591109115

PH

DP

90909115

2PARAMAX

HorizontalSplit

ParallelDouble

Reduction


909090959100910591109115



TU2 T2 U2 V2 V3X1 Y1 Z1 L1

9090 650 350 300 180m6 M30/60 45 15 25 270 844 494 350 193 1909095 700 350 350 190m6 M30/60 45 15 25 320 859 509 350 203 2009100 740 390 350 200m6 M30/60 45 15 25 320 934 544 390 213 2109105 740 390 350 220m6 M30/60 50 17 28 320 949 559 390 223 2209110 770 420 350 220m6 M30/60 50 17 28 320 1030 610 420 243 2409115 830 420 410 240m6 M30/60 56 20 32 375 1065 645 420 253 250

Unit: mm

(blank)F


SizeShaft

Arrangement

Low Speed ShaftType


(blank)T


(Shrink Disk type)


C - 150


SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

QR

FAFB

FDFC

C

QR

RL2Q

BH

BD

EH

OP

HL

AB

D

F

GL

G

4- JKK

E1

Y

RC1

RC2

Z2

W2

Y2 X2

S

With Fan※ Refer to the page D-23 for details.

High Speed Shaft

3


9015 338 160 257 90 135 270 299 70 22 15 95 485 170 205 3459025 408 175 306 95 155 310 339 80 25 19 110 570 195 235 4109030 453 200 343 110 160 320 349 90 28 24 120 640 215 265 4609035 484 219 374 129 185 370 399 90 28 24 120 690 215 265 5109040 540 235 398 120 200 400 431 115 30 28 150 759 255 315 5299045 577 256 437 141 220 440 471 115 30 28 150 819 255 315 5899050 609 255 467 138.5 210 420 451 116.5 32 28 150 848 285 345 6159055 648 286 506 171 245 490 521 115 32 28 150 918 285 345 688

SizeHigh Speed Shaft Fan Backstop

RC1 RC2 Wt.kg

OilQty.



9015 130 190 60 25k6 M10/22 8 4 7 50 111 125 30 10 3/4" 3/4" 105 59025 144 204 60 28k6 M10/22 8 4 7 50 129 125 30 10 3/4" 3/4" 150 89030 161 241 80 30k6 M10/22 8 4 7 70 140 125 50 30 3/4" 3/4" 205 109035 161 241 80 30k6 M10/22 8 4 7 70 150 140 50 22 3/4" 3/4" 225 139040 176 256 80 35k6 M12/28 10 5 8 70 170 140 50 22 1" 1" 305 199045 176 256 80 35k6 M12/28 10 5 8 70 170 140 50 22 1" 1" 375 219050 194 304 110 40k6 M16/36 12 5 8 95 172 140 80 52 150 263 1" 1" 445 249055 194 304 110 40k6 M16/36 12 5 8 95 172 140 80 52 150 263 1" 1" 505 29

Unit: mm4 Refer to the page D -13 for dimensions not shown in these drawings.5 Refer to the page D -24 for the dimension of optional parts.

DIMENSIONS Parallel Shaft Triple Reduction Horizontal Mounting 9015 9055


Nomenclature


Slow Speed Shaft



H

L

L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2

C - 151


OppositeSide



P H A P 3 - -

90159025903090359040904590509055

RLRRRBLRLLLBBLBRBB

PH

AP

90159055

3PARAMAX

HorizontalMonoblock

ParallelTriple

Reduction

Unit: mm






90159025903090359040904590509055

SizeShaft

Arrangement

Low Speed ShaftType


(blank)T

K



(blank)FB

FB



Option

C - 152


SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

QR

FAFB

FDFC

E H

OP

C

L2 RQ

QR

BH

BD

KD

G Y GL

K4- J

B A

FE

1E

2

RC

Z2

W2

Y2 X2

S

With Fan


High Speed Shaft

3

Unit: mm


9060 701 299 540 151 265 530 155 578 135 35 35 180 970 310 380 7009065 747 338 586 190 300 600 120 648 135 35 35 180 1055 310 380 7859070 809 336 630 163 300 600 181 648 160 40 42 215 1115 350 430 7959075 862 383 683 210 335 670 146 718 160 52 42 220 1215 350 430 8959080 932 378 725 205 335 670 205 718 160 52 42 220 1275 380 460 9559085 988 422 781 249 375 750 165 798 160 52 42 220 1375 380 460 1055

SizeHigh Speed Shaft Fan Backstop

RC Wt.kg

OilQty.



9060 219 329 110 50k6 M16/36 14 5.5 9 95 199 160 80 52 175 308 1" 660 339065 219 329 110 50k6 M16/36 14 5.5 9 95 199 160 80 52 175 308 1" 815 389070 244 354 110 55m6 M20/42 16 6 10 95 221 160 80 52 190 330 1" 940 499075 244 354 110 55m6 M20/42 16 6 10 95 221 160 80 52 190 330 1" 1160 599080 265 405 140 65m6 M20/42 18 7 11 125 247 200 105 65 210 365 1" 1350 649085 265 405 140 65m6 M20/42 18 7 11 125 247 200 105 65 210 365 1" 1610 80

4 Refer to the page D -15 for dimensions not shown in these drawings.5 Refer to the page D -27 for the dimension of optional parts.



Nomenclature


Slow Speed Shaft



H

L

L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2

C - 153


OppositeSide



P H D P 3 - -

906090659070907590809085

PH

DP

90609085

3PARAMAX

HorizontalSplit

ParallelTriple

Reduction

RLRRRBLRLLLBBLBRBB

Unit: mm




9060 440 230 210 125m6 M24/50 32 11 18 185 583 353 230 128 125 470 235 235 125 1239065 484 234 250 140m6 M30/60 36 12 20 225 594 359 235 143 140 480 240 240 145 1439070 509 259 250 145m6 M30/60 36 12 20 225 644 384 260 148 145 530 265 265 145 1439075 562 262 300 160m6 M30/60 40 13 22 275 651 386 265 158 155 530 265 265 150 1489080 582 282 300 165m6 M30/60 40 13 22 275 714 429 285 173 170 570 285 285 165 1639085 585 285 300 175m6 M30/60 45 15 25 270 714 429 285 183 180 570 285 285 175 173


906090659070907590809085

SizeShaft

Arrangement

Low Speed ShaftType


(blank)T

K



(blank)FB

FB



Option

C - 154


SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

C

L2 RQ Q

R

6- J

A

D

E1

E2

F

G G

K1 K2 K3

Y YL

RC

B

OP

EH

FAFB

FDFC

QR Z2

W2

Y2 X2

S

B (9090 9100)


High Speed Shaft

3 Refer to the page D -16 for dimensions not shown in these drawings.

4 Refer to the page D -30 for the dimension of optional parts.


9090 1070 428 837 345 375 750 249 797 60 50 42 270 250 210 1440 480 570 6609095 1100 458 867 375 400 800 254 847 60 50 42 290 250 210 1500 480 570 6909100 1204 468 950 375 425 850 273 897 70 55 48 300 280 240 1610 560 650 7359105 1238 493 984 410 450 900 278 947 70 55 48 320 280 240 1680 560 650 7709110 1354 508 1050 420 475 950 283 997 75 60 56 340 310 260 1810 610 710 8309115 1403 558 1099 470 500 1000 282 1047 75 60 56 350 310 260 1910 610 710 880


RC Wt.kg

OilQty.



9090 330 470 140 65m6 M20/42 18 7 11 125 268 200 105 65 1 1/2" 2100 1209095 330 470 140 65m6 M20/42 18 7 11 125 268 200 105 65 1 1/2" 2350 1559100 375 515 140 75m6 M20/42 20 7.5 12 125 289 225 105 65 1 1/2" 2780 1809105 375 515 140 75m6 M20/42 20 7.5 12 125 289 225 105 65 1 1/2" 3340 2259110 405 575 170 80m6 M20/42 22 9 14 150 339 225 135 95 1 1/2" 4010 2609115 405 575 170 80m6 M20/42 22 9 14 150 339 225 135 95 1 1/2" 4460 325

Unit: mm


Nomenclature

C - 155

Slow Speed Shaft





H

L

L1U1

TU1T1

V1

W1

Z1Y1

X1

TU2U2 T2

V3V2


OppositeSide



P H D P 3 - -

909090959100910591109115

PH

DP

90909115

3PARAMAX

HorizontalSplit

ParallelTriple

Reduction


909090959100910591109115

RLRRRBLRLLLBBLBRBB


TU1 T1 U1 V1 W1/Depth TU2 T2 U2 V2 V3X1 Y1 Z1 L1

9090 650 350 300 180m6 M30/60 45 15 25 270 844 494 350 193 1909095 700 350 350 190m6 M30/60 45 15 25 320 859 509 350 203 2009100 740 390 350 200m6 M30/60 45 15 25 320 934 544 390 213 2109105 740 390 350 220m6 M30/60 50 17 28 320 949 559 390 223 2209110 770 420 350 220m6 M30/60 50 17 28 320 1030 610 420 243 2409115 830 420 410 240m6 M30/60 56 20 32 375 1065 645 420 253 250

Unit: mm

(blank)F


SizeShaft

Arrangement

Low Speed ShaftType


(blank)T


(Shrink Disk type)


C - 156


SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

E

H

R

L2

QR

Q

O

P

TU1

U1 T1

L1E2

E1F

B A

C

L

K1 K2 K3

D

G GY Y

6- JRC

Z1

W1

Y1

X1

V1

Z2

W2

Y2 X2

S

Slow Speed ShaftHigh Speed Shaft

3 Consult us for dimensions not shown in these drawings.

Unit: mm


9118 1444 608 1140 490 535 1070 338 1117 95 65 56 350 320 260 1990 610 710 900

9121 1585 663 1290 545 580 1160 347 1207 95 70 56 390 300 270 2180 680 780 995

9126 1585 663 1290 545 580 1160 347 1207 95 70 56 390 300 270 2180 680 780 995

SizeHigh Speed Shaft

RC Wt.kg

OilQty.


X2 Y2 Z2 L29118 405 575 170 80m6 M20/42 22 9 14 150 1 1/2" 5050 3509121 440 650 210 100m6 M24/50 28 10 16 190 1 1/2" 6050 4709126 440 650 210 100m6 M24/50 28 10 16 190 1 1/2" 6350 470

SizeSolid Shaft


X1 Y1 Z1 L19118 850 440 410 260m6 M36/70 56 20 32 3759121 935 465 470 280m6 M36/70 63 20 32 4259126 935 465 470 300m6 M36/70 70 22 36 425


H

L


Nomenclature


C - 157


OppositeSide



P H D P 3 - -

RLRRRBLRLLLBBLBRBB

911891219126

PH

DP

91189126

3PARAMAX

HorizontalSplit

ParallelTriple

Reduction

Size Nominal Reduction Ratio22.4 25 28 31.5 35.5 40 45 50 56 63 71 80 90

911891219126

(blank)F


FanNominal

Reduction RatioShaft

ArrangementSize


C - 158


SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

Size A B C D E E1 F G H J K1 K2 L O P Y Y3

9128 1720 680 1413 330 600 1194 1241 140 55 66 940 280 1990 710 840 660 10509131 1882 730 1550 330 630 1256 1303 140 60 66 940 280 2170 850 980 660 12309136 1882 730 1550 330 630 1256 1303 140 60 66 940 280 2170 850 980 660 1230


RC Wt.kg

OilQty.


X2 Y2 Z2 L29128 470 680 210 100m6 M24/50 28 10 16 190 1 1/2" 7250 3909131 540 790 250 130m6 M24/50 32 11 18 225 1 1/2" 9550 5509136 540 790 250 130m6 M24/50 32 11 18 225 1 1/2" 9900 540

SizeSolid Shaft


X1 Y1 Z1 L19128 950 480 470 320m6 M36/70 200 70 22 36 4259131 1100 550 550 340m6 M36/70 215 80 25 40 5009136 1110 560 550 360m6 M36/70 230 80 25 40 500

6- J

K1

D

Y Y3

L

GG

G

K2

AB

C

F E1

RC

HL

L2R

TU1

U1 T1

L1

Q

O

P

QR

H

E

Z1

W1

Y1

X1

V1WL

Z2

W2

Y2 X2

S

Slow Speed High Speed Shaft

3. Consult us for dimensions not shown in these drawings.

Unit: mm


H

L


Nomenclature


C - 159


OppositeSide



P H D P 3 A - -

912891319136

RLRRRBLRLLLBBLBRBB

PH

DP

91289136

3PARAMAX

HorizontalSplit

ParallelTriple

Reduction

ASteelHousing

Size Nominal Reduction Ratio22.4 25 28 31.5 35.5 40 45 50 56 63 71 80 90

912891319136

(blank)F


SizeShaft

ArrangementNominal

Reduction RatioFan


C - 160


SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles


9030 453 200 343 110 160 320 349 90 28 24 120 640 215 265 223 4609035 484 219 374 129 185 370 399 90 28 24 120 690 215 265 248 5109040 540 235 398 120 200 400 431 115 30 28 150 759 255 315 279 5299045 577 256 437 141 220 440 471 115 30 28 150 819 255 315 299 5899050 609 255 467 138.5 210 420 451 116.5 32 28 150 848 285 345 289 6159055 648 286 506 171 245 490 521 115 32 28 150 918 285 345 324 688

SizeHigh Speed Shaft Backstop

RC1 RC2 Wt.kg

OilQty.


BD BHX2 Y2 Z2 L2

9030 159 219 60 25k6 M10/22 8 4 7 50 3/4" 3/4" 210 149035 159 219 60 25k6 M10/22 8 4 7 50 3/4" 3/4" 230 179040 175 235 60 28k6 M10/22 8 4 7 50 1" 1" 310 259045 175 235 60 28k6 M10/22 8 4 7 50 1" 1" 380 289050 195 275 80 30k6 M10/22 8 4 7 70 150 263 1" 1" 450 329055 195 275 80 30k6 M10/22 8 4 7 70 150 263 1" 1" 510 40

Unit: mm

C

QR

RL2

QB

H

BD

EH

OP

X

HL

AB

D

F

GL

G

4- JKK

E1

Y

RC1

RC2

Z2

W2

Y2 X2

S

High Speed Shaft

3. Refer to the page D -13 for dimensions not shown in these drawings.


DIMENSIONS Parallel Shaft Quadruple Reduction Horizontal Mounting 9030 9055


Nomenclature



Slow Speed Shaft

L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2


H

L

C - 161


OppositeSide






9030 330 160 170 80m6 M20/42 22 9 14 150 393 233 160 83 80 330 165 165 75 759035 330 160 170 90m6 M20/42 25 9 14 150 403 243 160 88 85 330 165 165 85 859040 349 179 170 95m6 M24/50 25 9 14 150 448 268 180 98 95 360 180 180 90 909045 391 181 210 105m6 M24/50 28 10 16 190 463 283 180 108 105 370 185 185 105 1059050 411 201 210 110m6 M24/50 28 10 16 190 503 303 200 108 105 410 205 205 105 1059055 411 201 210 120m6 M24/50 32 11 18 185 528 323 205 123 120 410 205 205 115 115

Unit: mm

P H A P 4 - -

903090359040904590509055

RLRRRBLRLLLBBLBRBB


903090359040904590509055

PH

AP

90309055

4PARAMAX

HorizontalMonoblock

ParallelQuadruple Reduction

SizeShaft

Arrangement

Low Speed ShaftType


(blank)B


(blank)T

K




Option

C - 162


SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

EH

OP

X

KD

G Y GL

K4- J

B A

FE

1E

2

RC

C

L2 RQ Q

RB

H

BD

Z2

W2

Y2 X2

S

High Speed Shaft

Size A B C D E E1 E2 F G H J K L O P X Y

9060 701 299 540 151 265 530 126 578 135 35 35 180 970 310 380 357 7009065 747 338 586 190 300 600 91 648 135 35 35 180 1055 310 380 392 7859070 809 336 630 163 300 600 144 648 160 40 42 215 1115 350 430 409 7959075 862 383 683 210 335 670 109 718 160 52 42 220 1215 350 430 444 8959080 932 378 725 205 335 670 167 718 160 52 42 220 1275 380 460 461 9559085 988 422 781 249 375 750 127 798 160 52 42 220 1375 380 460 501 1055

SizeHigh Speed Shaft Backstop

RC Wt.kg

OilQty.


BD BHX2 Y2 Z2 L2

9060 221 301 80 35k6 M12/28 10 5 8 70 175 308 1" 660 379065 221 301 80 35k6 M12/28 10 5 8 70 175 308 1" 815 429070 244 354 110 40k6 M16/36 12 5 8 95 190 330 1" 950 569075 244 354 110 40k6 M16/36 12 5 8 95 190 330 1" 1170 679080 264 374 110 45k6 M16/36 14 5.5 9 95 210 365 1" 1360 739085 264 374 110 45k6 M16/36 14 5.5 9 95 210 365 1" 1620 90

Unit: mm





Nomenclature



Slow Speed Shaft

L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2


H

L

C - 163


OppositeSide



P H D P 4 - -

906090659070907590809085

PH

DP

90609085

4PARAMAX

HorizontalSplit


RLRRRBLRLLLBBLBRBB




9060 440 230 210 125m6 M24/50 32 11 18 185 583 353 230 128 125 470 235 235 125 1239065 484 234 250 140m6 M30/60 36 12 20 225 594 359 235 143 140 480 240 240 145 1439070 509 259 250 145m6 M30/60 36 12 20 225 644 384 260 148 145 530 265 265 145 1439075 562 262 300 160m6 M30/60 40 13 22 275 651 386 265 158 155 530 265 265 150 1489080 582 282 300 165m6 M30/60 40 13 22 275 714 429 285 173 170 570 285 285 165 1639085 585 285 300 175m6 M30/60 45 15 25 270 714 429 285 183 180 570 285 285 175 173


906090659070907590809085

Unit: mm

SizeShaft

Arrangement

Low Speed ShaftType


(blank)B


(blank)T

K




Option

C - 164


SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

EH

OP

X

C

L2 RQ Q

R

6- J

A

D

E1

E2

F

G G

K1 K2 K3

Y YL

RC

B

Z2

W2

Y2 X2

S

B (9090 9100)

High Speed Shaft



Size A B C D E E1 E2 F G H J K1 K2 K3 L O P X Y

9090 1070 428 795 345 375 750 194 797 60 50 42 270 250 210 1440 480 570 517 6609095 1100 458 825 375 400 800 199 847 60 50 42 290 250 210 1500 480 570 542 6909100 1204 468 901 375 425 850 208 897 70 55 48 300 280 240 1610 560 650 587 7359105 1238 493 935 410 450 900 213 947 70 55 48 320 280 240 1680 560 650 612 7709110 1354 508 1001 420 475 950 218 997 75 60 56 340 310 260 1810 610 710 637 8309115 1403 558 1050 470 500 1000 217 1047 75 60 56 350 310 260 1910 610 710 662 880


RC Wt.kg

OilQty.


X2 Y2 Z2 L29090 330 440 110 50k6 M16/36 14 5.5 9 95 1 1/2" 2150 1509095 330 440 110 50k6 M16/36 14 5.5 9 95 1 1/2" 2400 1809100 375 515 140 60m6 M20/42 18 7 11 125 1 1/2" 2830 2209105 375 515 140 60m6 M20/42 18 7 11 125 1 1/2" 3390 2609110 405 545 140 60m6 M20/42 18 7 11 125 1 1/2" 4060 3009115 405 545 140 60m6 M20/42 18 7 11 125 1 1/2" 4510 365

Unit: mm


Slow Speed Shaft


L1U1

TU1T1

V1

W1

Z1Y1

X1

TU2U2 T2

V3V2


Nomenclature

Standard Shaft Arrangement ConfigurationRL RR RB LR LL LB BL BR BB

H

L

C - 165


OppositeSide



P H D P 4 - -

909090959100910591109115

RLRRRBLRLLLBBLBRBB

PH

DP

90909115

4PARAMAX

HorizontalSplit



909090959100910591109115



TU2 T2 U2 V2 V3X1 Y1 Z1 L1

9090 650 350 300 180m6 M30/60 45 15 25 270 844 494 350 193 1909095 700 350 350 190m6 M30/60 45 15 25 320 859 509 350 203 2009100 740 390 350 200m6 M30/60 45 15 25 320 934 544 390 213 2109105 740 390 350 220m6 M30/60 50 17 28 320 949 559 390 223 2209110 770 420 350 220m6 M30/60 50 17 28 320 1030 610 420 243 2409115 830 420 410 240m6 M30/60 56 20 32 375 1065 645 420 253 250

Unit: mm

SizeShaft

Arrangement

Low Speed ShaftType



(blank)T


(Shrink Disk type)

C - 166


SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

Size A B C D E E1 E2 F G H J K1 K2 K3 L O P X Y

9118 1444 608 1091 490 535 1070 278 1117 95 65 56 350 320 260 1990 610 710 697 9009121 1585 663 1290 545 580 1160 277 1207 95 70 56 390 300 270 2180 680 780 777 9959126 1585 663 1290 545 580 1160 277 1207 95 70 56 390 300 270 2180 680 780 777 995


RC Wt.kg

OilQty.


X2 Y2 Z2 L29118 405 545 140 60m6 M20/42 18 7 11 125 1 1/2" 5050 3909121 440 580 140 65m6 M20/42 18 7 11 125 1 1/2" 6100 5309126 440 580 140 65m6 M20/42 18 7 11 125 1 1/2" 6350 520

SizeSolid Shaft


X1 Y1 Z1 L19118 850 440 410 260m6 M36/70 56 20 32 3759121 935 465 470 280m6 M36/70 63 20 32 4259126 935 465 470 300m6 M36/70 70 22 36 425

O

P

H

E

L1

U1

TU1 QR

T1 Q R

L2

X

F E1

E2

K1 K2 K3

D

Y Y

L

G G

6- J

B A

C

RC

Z1

W1

Y1

X1

V1

Z2

W2

Y2 X2

S


Unit: mm



H

L


Nomenclature


C - 167


OppositeSide



P H D P 4 - -

911891219126

RLRRRBLRLLLBBLBRBB

PH

DP

91189126

4PARAMAX

HorizontalSplit



911891219126

SizeShaft

ArrangementNominal

Reduction Ratio


C - 168


SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

G

K1

D G

Y Y3

L

G

K2

6- J

F E1

B A

C

RC

HL

E

H

L1

U1

TU1 QR

T1

L2

RQ

O

P

X

Z1

W1

Y1

X1

V1WL

Z2

W2

Y2 X2

S



Unit: mm

Size A B C D E E1 F G H J K1 K2 L O P X Y Y3

9128 1720 680 1413 330 600 1194 1241 140 55 66 940 280 1990 710 840 826 660 1050

9131 1882 730 1550 330 630 1256 1303 140 60 66 940 280 2170 850 980 856 660 1230

9136 1882 730 1550 330 630 1256 1303 140 60 66 940 280 2170 850 980 856 660 1230


RC Wt.kg

OilQty.


X2 Y2 Z2 L29128 465 605 140 75m6 M20/42 20 7.5 12 125 1 1/2" 7400 4509131 540 680 140 75m6 M20/42 20 7.5 12 125 1 1/2" 9600 6509136 540 680 140 75m6 M20/42 20 7.5 12 125 1 1/2" 10000 640

SizeSlow Speed Shaft (Solid)


X1 Y1 Z1 L19128 950 480 470 320m6 M36/70 200 70 22 36 4259131 1100 550 550 340m6 M36/70 215 80 25 40 5009136 1110 560 550 360m6 M36/70 230 80 25 40 500


H

L


Nomenclature


C - 169


OppositeSide



P H D P 4 A - - Size

RLRRRBLRLLLBBLBRBB

912891319136

PH

DP

91289136

4PARAMAX

HorizontalSplit


ASteelHousing


911891219126

ShaftArrangement



C - 170


SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

E2 E3

C

NQ

RQ

RL2

NP

HP

P

HL

N1 N

2

AB

RC1

MM

OE1

RC24- JK K

LDG GY

RIZ2

W2

Y2 X2

S

High Speed Shaft

Size A B C D E1 E2 E3 G H RI J K L M N N1 N2 NP O P Y

9015 295 160 194 140 270 195 135 20 35 80 15 95 440 70 186 25 14 100 230 102.5 2609025 346 175 227 155 310 215 155 20 40 87.5 19 110 505 75 198.5 23 12 100 270 117.5 3109030 406 200 264 175 320 220 160 25 50 105 24 120 590 85 211 22 9 100 270 132.5 3659035 437 219 295 194 370 245 185 25 50 120 24 120 640 100 211 22 9 100 320 132.5 3969040 467 235 306 205 400 260 200 30 60 120 28 150 685 100 239 15 2 117 340 157.5 4209045 506 256 345 226 440 266 220 30 60 140 28 150 745 120 239 17.5 2 117 380 157.5 4599050 537 255 358 225 420 270 210 30 60 140 28 150 775 110 259 23 7 117 360 172.5 4909055 576 286 397 256 490 305 245 30 60 155 28 150 845 135 259 23 7 117 430 172.5 529


RC1 RC2 Wt.kg

OilQty.


X2 Y2 Z2 L29015 131 211 80 30k6 M10/22 8 4 7 70 3/4" 3/4" 100 59025 146 226 80 35k6 M12/28 10 5 8 70 3/4" 3/4" 140 79030 159 269 110 40k6 M16/36 12 5 8 95 3/4" 3/4" 195 99035 159 269 110 40k6 M16/36 12 5 8 95 3/4" 3/4" 215 129040 174 284 110 50k6 M16/36 14 5.5 9 95 1" 1" 285 189045 174 284 110 50k6 M16/36 14 5.5 9 95 1" 1" 345 229050 193 303 110 55k6 M20/42 16 6 10 95 1" 1" 415 229055 193 303 110 55k6 M20/42 16 6 10 95 1" 1" 472 31

Unit: mm




Nomenclature

RL RR


Slow Speed Shaft

Standard Arrangement Configuration


C - 171

H

L

L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2



Backstop(Option)


P V A P 2 - -

RLRR

90159025903090359040904590509055

PV

AP

90159055

2PARAMAX

VerticalMonoblock

ParallelDouble

Reduction

Unit: mm






90159025903090359040904590509055

(blank)T

K



SizeShaft

Arrangement

Low Speed ShaftType



C - 172


SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

Size A B C D E1 E2 E3 G H RI J K L M N N1 NP O P P1 Y

9060 621 299 414 251 530 282 265 35 35 160 35 180 885 140 277.5 35 117 460 190 223 5649065 667 338 460 290 600 317 300 35 35 175 35 180 970 175 277.5 38 117 530 190 223 6109070 719 336 482 283 600 317 300 40 40 175 42 215 1020 155 304 38 117 520 215 253 6579075 772 383 535 330 670 352 335 40 52 190 42 220 1120 195 304 40 117 590 215 253 7109080 812 378 556 325 670 352 335 40 52 190 42 220 1155 170 322.5 45 117 590 230 283 7509085 868 422 612 369 750 392 375 40 52 215 42 220 1255 210 322.5 40 117 670 230 283 806


RC1 RC2 Wt.kg

OilQty.


X2 Y2 Z2 L29060 220 360 140 65m6 M20/42 18 7 11 125 1" 1" 610 259065 220 360 140 65m6 M20/42 18 7 11 125 1" 1" 735 329070 245 385 140 75m6 M20/42 20 7.5 12 125 1" 1" 860 399075 245 385 140 75m6 M20/42 20 7.5 12 125 1" 1" 1110 499080 264 434 170 85m6 M20/42 22 9 14 150 1" 1" 1240 549085 264 434 170 85m6 M20/42 22 9 14 150 1" 1" 1500 71

Unit: mm

E2 E3

H NQ

RQ

RL2

C

P1

PP

NP

N1

A

4- J

MM

OE1

K K

LDG GY

B

RI

RC2

RC1

Z2

W2

Y2 X2

S

High Speed Shaft

4 Refer to the page D-14 for dimensions not shown in these drawings.5 Refer to the page D-28 for the dimension of optional parts.


3. Shaft arrangement RR is equipped with visible gauge. Refer to page D-28.

Nomenclature

RL RR


Slow Speed Shaft



C - 173

H

L

L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2



Backstop(Option)



TU1 T1 U1 V1 W1/Depth TU2 T2 U2 V2 V3 TU4 T4 U4 V4 V5X1 Y1 Z1 L1

9060 440 230 210 125m6 M24/50 32 11 18 185 583 353 230 128 125 470 235 235 125 1239065 484 234 250 140m6 M30/60 36 12 20 225 594 359 235 143 140 480 240 240 145 1439070 509 259 250 145m6 M30/60 36 12 20 225 644 384 260 148 145 530 265 265 145 1439075 562 262 300 160m6 M30/60 40 13 22 275 651 386 265 158 155 530 265 265 150 1489080 582 282 300 165m6 M30/60 40 13 22 275 714 429 285 173 170 570 285 285 165 1639085 585 285 300 175m6 M30/60 45 15 25 270 714 429 285 183 180 570 285 285 175 173


906090659070907590809085

Unit: mm

P V D P 2 - -

RLRR

906090659070907590809085

PV

DP

90609085

2PARAMAX

VerticalSplit

ParallelDouble

Reduction

(blank)T

K



SizeShaft

Arrangement

Low Speed ShaftType




SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

C - 174

C

P1

QRL2

QR

N1

PP H

RC2 E2 E2

4- J

AB

DK K

YG GL

E1

MM

O E3

RI

RC1

Z2

W2

Y2 X2

S

High Speed Shaft



9090 ~ 9115 are equipped with motor driven pumps. For details consult us.

Size A B C D E1 E2 E3 G H RI J K L M N1 O P P1 Y

9090 1070 410 640 345 750 421 430 60 50 215 42 180 1440 130 50 630 285 394 9759095 1100 440 670 375 800 446 430 60 50 235 42 200 1500 140 50 680 285 394 10059100 1204 450 724 375 850 471 500 70 55 235 48 200 1610 150 60 710 325 443 10959105 1238 485 758 410 900 496 500 70 55 260 48 220 1680 160 60 760 325 443 11309110 1354 500 824 420 950 521 500 75 60 265 56 220 1810 170 55 800 355 475 12409115 1403 550 873 470 1000 546 500 75 60 280 56 250 1910 180 55 850 355 475 1290


RC1 RC2 Wt.kg

OilQty.


X2 Y2 Z2 L29090 330 500 170 90m6 M24/50 25 9 14 150 1" 1 1/2" 2070 909095 330 500 170 90m6 M24/50 25 9 14 150 1" 1 1/2" 2330 1209100 375 585 210 100m6 M24/50 28 10 16 190 1" 1 1/2" 2820 1409105 375 585 210 100m6 M24/50 28 10 16 190 1" 1 1/2" 3300 1759110 405 615 210 110m6 M24/50 28 10 16 190 1" 1 1/2" 3950 2009115 405 615 210 110m6 M24/50 28 10 16 190 1" 1 1/2" 4470 255

Unit: mm


L1U1

TU1T1

V1

W1

Z1Y1

X1

TU2U2 T2

V3V2

C - 175

Slow Speed Shaft

Standard Arrangement ConfigurationRL RR

Nomenclature

Solid Shaft Hollow Shaft (Shrink Type)


H

L



Backstop(Option)


P V D P 2 - -

RLRR

909090959100910591109115

PV

DP

90909115

2PARAMAX

VerticalSplit

ParallelDouble

Reduction


909090959100910591109115



TU2 T2 U2 V2 V3X1 Y1 Z1 L1

9090 650 350 300 180m6 M30/60 45 15 25 270 844 494 350 193 1909095 700 350 350 190m6 M30/60 45 15 25 320 859 509 350 203 2009100 740 390 350 200m6 M30/60 45 15 25 320 934 544 390 213 2109105 740 390 350 220m6 M30/60 50 17 28 320 949 559 390 223 2209110 770 420 350 220m6 M30/60 50 17 28 320 1030 610 420 243 2409115 830 420 410 240m6 M30/60 56 20 32 375 1065 645 420 253 250

Unit: mm

(blank)T


(Shrink Disk type)

SizeShaft

Arrangement

Low Speed ShaftType



C - 176


SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

E2 E3

C

NQ

RQ

R

NP

L2

H

PP

N1

HL

194 (9015 Only )

AB

M1

M1

OE1

4- JK K

LDG GY

M2

RI

RC1

RC2

Z2W2

Y2 X2

S

High Speed Shaft

Size A B C D E1 E2 E3 G H RI J K L M1 M2 N N1 NP O P Y

9015 338 160 257 140 270 195 135 20 35 80 15 95 485 70 80 186 25 100 230 102.5 3059025 408 175 306 155 310 215 155 20 40 87.5 19 110 570 75 90 198.5 23 100 270 117.5 3759030 453 200 343 175 320 220 160 25 50 105 24 120 640 85 50 211 22 100 270 132.5 4159035 484 219 374 194 370 245 185 25 50 120 24 120 690 100 75 211 22 100 320 132.5 4469040 540 235 398 205 400 260 200 30 60 120 28 150 759 100 70 228.5 15 100 340 157.5 4949045 577 256 437 226 440 277 220 30 60 140 28 150 819 120 90 228.5 17.5 100 380 157.5 5339050 609 255 467 225 420 270 210 30 60 140 28 150 848 110 83 248.5 23 100 360 172.5 5639055 648 286 506 256 490 305 245 30 60 155 28 150 918 135 118 248.5 23 100 430 172.5 602


RC1 RC2 Wt.kg

OilQty.


X2 Y2 Z2 L29015 130 190 60 25k6 M10/22 8 4 7 50 3/4" 3/4" 105 69025 144 204 60 28k6 M10/22 8 4 7 50 3/4" 3/4" 150 89030 161 241 80 30k6 M10/22 8 4 7 70 3/4" 3/4" 205 109035 161 241 80 30k6 M10/22 8 4 7 70 3/4" 3/4" 225 149040 176 256 80 35k6 M12/28 10 5 8 70 1" 1" 305 189045 176 256 80 35k6 M12/28 10 5 8 70 1" 1" 375 229050 194 304 110 40k6 M16/36 12 5 8 95 1" 1" 445 259055 194 304 110 40k6 M16/36 12 5 8 95 1" 1" 505 35

Unit: mm

3 Refer to the page D-13 for dimensions not shown in these drawings.

4 Refer to the page D-25 for the dimension of optional parts.


Nomenclature

RL RR


Slow Speed Shaft



C - 177

H

L

L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2



Backstop(Option)


P V A P 3 - -

RLRR

90159025903090359040904590509055

PV

AP

90159055

3PARAMAX

VerticalMonoblock

ParallelTriple

Reduction






90159025903090359040904590509055

Unit: mm

(blank)T

K



SizeShaft

Arrangement

Low Speed ShaftType



C - 178


SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

E2 E3

H

NQ

RQ

RL2P1

PP

NP

N1

C

A

4- J

RC1

M1

M1

O

K K

LDG GYRC2

BM

2

E1

RI

Z2

W2Y

2 X2

S

High Speed Shaft

Size A B C D E1 E2 E3 G H RI J K L M1 M2 N N1 NP O P P1 Y

9060 701 299 540 251 530 282 265 35 35 160 35 180 970 140 118 277.5 35 117 460 190 223 6499065 747 338 586 290 600 317 300 35 35 175 35 180 1055 175 153 277.5 38 117 530 190 223 6959070 809 336 630 283 600 317 300 40 40 175 42 215 1115 155 128 304 38 117 520 215 253 7529075 862 383 683 330 670 352 335 40 52 190 42 220 1215 195 163 304 40 117 590 215 253 8059080 932 378 725 325 670 352 335 40 52 190 42 220 1275 170 140 322.5 45 117 590 230 283 8709085 988 422 781 369 750 392 375 40 52 215 42 220 1375 210 180 322.5 40 117 670 230 283 926


RC1 RC2 Wt.kg

OilQty.


X2 Y2 Z2 L29060 219 329 110 50k6 M16/36 14 5.5 9 95 1" 1" 660 289065 219 329 110 50k6 M16/36 14 5.5 9 95 1" 1" 815 359070 244 354 110 55m6 M20/42 16 6 10 95 1" 1" 940 449075 244 354 110 55m6 M20/42 16 6 10 95 1" 1" 1160 569080 265 405 140 65m6 M20/42 18 7 11 125 1" 1" 1350 579085 265 405 140 65m6 M20/42 18 7 11 125 1" 1" 1610 79

Unit: mm




Nomenclature

RL RR


Slow Speed Shaft



C - 179

H

L

L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2



Backstop(Option)


P V D P 3 - -

RLRR

906090659070907590809085

PV

DP

90609085

3PARAMAX

VerticalSplit

ParallelTriple

Reduction

Unit: mm




9060 440 230 210 125m6 M24/50 32 11 18 185 583 353 230 128 125 470 235 235 125 1239065 484 234 250 140m6 M30/60 36 12 20 225 594 359 235 143 140 480 240 240 145 1439070 509 259 250 145m6 M30/60 36 12 20 225 644 384 260 148 145 530 265 265 145 1439075 562 262 300 160m6 M30/60 40 13 22 275 651 386 265 158 155 530 265 265 150 1489080 582 282 300 165m6 M30/60 40 13 22 275 714 429 285 173 170 570 285 285 165 1639085 585 285 300 175m6 M30/60 45 15 25 270 714 429 285 183 180 570 285 285 175 173


906090659070907590809085

(blank)T

K



SizeShaft

Arrangement

Low Speed ShaftType




SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

C - 180

4- J

AB

DK K

YG GL

E1

MM

O E3

RI

RC1

E2 E2

C

P1

QRL2

QR

N1

PP H

RC2

Z2

W2

Y2 X2

S

High Speed Shaft

3. Shaft arrangement RR is equipped with oil gauge. Refer to the page D-31.

4. Refer to the page D -16 for dimensions not shown in these drawings.5. Refer to the page D -31 for the dimension of optional parts.


Size A B C D E1 E2 E3 G H RI J K L M N1 O P P1 Y

9090 1070 410 837 345 750 421 430 60 50 215 42 180 1440 130 50 630 285 394 9759095 1100 440 867 375 800 446 430 60 50 235 42 200 1500 140 50 680 285 394 10059100 1204 450 950 375 850 471 500 70 55 235 48 200 1610 150 60 710 325 443 10959105 1238 485 984 410 900 496 500 70 55 260 48 220 1680 160 60 760 325 443 11309110 1354 500 1050 420 950 521 500 75 60 265 56 220 1810 170 55 800 355 475 12409115 1403 550 1099 470 1000 546 500 75 60 280 56 250 1910 180 55 850 355 475 1290


RC1 RC2 Wt.kg

OilQty.


X2 Y2 Z2 L29090 330 470 140 65m6 M20/42 18 7 11 125 1" 1 1/2" 2120 909095 330 470 140 65m6 M20/42 18 7 11 125 1" 1 1/2" 2380 1209100 375 515 140 75m6 M20/42 20 7.5 12 125 1" 1 1/2" 2870 1409105 375 515 140 75m6 M20/42 20 7.5 12 125 1" 1 1/2" 3350 1759110 405 575 170 80m6 M20/42 22 9 14 150 1" 1 1/2" 4000 2009115 405 575 170 80m6 M20/42 22 9 14 150 1" 1 1/2" 4520 255

Unit: mm


L1U1

TU1T1

V1

W1

Z1Y1

X1

TU2U2 T2

V3V2

C - 181

Slow Speed Shaft


Nomenclature



H

L



Backstop(Option)


P V D P 3 - -

RLRR

909090959100910591109115

PV

DP

90909115

3PARAMAX

VerticalSplit

ParallelTriple

Reduction


909090959100910591109115



TU2 T2 U2 V2 V3X1 Y1 Z1 L1

9090 650 350 300 180m6 M30/60 45 15 25 270 844 494 350 193 1909095 700 350 350 190m6 M30/60 45 15 25 320 859 509 350 203 2009100 740 390 350 200m6 M30/60 45 15 25 320 934 544 390 213 2109105 740 390 350 220m6 M30/60 50 17 28 320 949 559 390 223 2209110 770 420 350 220m6 M30/60 50 17 28 320 1030 610 420 243 2409115 830 420 410 240m6 M30/60 56 20 32 375 1065 645 420 253 250

Unit: mm

(blank)T


(Shrink Disk type)

SizeShaft

Arrangement

Low Speed ShaftType



C - 182


SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

E2 E3

XC

NQ

RQ

R

NP

L2

HL

H

PP

N1

AB

RC1

M1

M1

OE1

RC2

4- JK K

LDG GY

M2

RI

Z2

W2Y

2 X2

S

High Speed Shaft


Size A B C D E1 E2 E3 G H RI J K L M1 M2 N N1 NP O P X Y

9030 453 200 343 175 320 220 160 25 50 105 24 120 640 85 50 211 22 100 270 132.5 63 4159035 484 219 374 194 370 245 185 25 50 120 24 120 690 100 75 211 22 100 320 132.5 63 4469040 540 235 398 205 400 260 200 30 60 120 28 150 759 100 70 228.5 15 100 340 157.5 79 4949045 577 256 437 226 440 277 220 30 60 140 28 150 819 120 90 228.5 17.5 100 380 157.5 79 5339050 609 255 467 225 420 270 210 30 60 140 28 150 848 110 83 248.5 23 100 360 172.5 79 5639055 648 286 506 256 490 305 245 30 60 155 28 150 918 135 118 248.5 23 100 430 172.5 79 602


RC1 RC2 Wt.kg

OilQty.


X2 Y2 Z2 L29030 159 219 60 25k6 M10/22 8 4 7 50 3/4" 3/4" 210 109035 159 219 60 25k6 M10/22 8 4 7 50 3/4" 3/4" 230 149040 175 235 60 28k6 M10/22 8 4 7 50 1" 1" 310 179045 175 235 60 28k6 M10/22 8 4 7 50 1" 1" 380 219050 195 275 80 30k6 M10/22 8 4 7 70 1" 1" 450 239055 195 275 80 30k6 M10/22 8 4 7 70 1" 1" 510 33

Unit: mm


DIMENSIONS Parallel Shaft Quadruple Reduction Vertical Mounting 9030 9055

Nomenclature

RL RR


Slow Speed Shaft



C - 183

H

L

L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2



Backstop(Option)


P V A P 4 - -

RLRR

903090359040904590509055

PV

AP

90309055

4PARAMAX

VerticalMonoblock





9030 330 160 170 80m6 M20/42 22 9 14 150 393 233 160 83 80 330 165 165 75 759035 330 160 170 90m6 M20/42 25 9 14 150 403 243 160 88 85 330 165 165 85 859040 349 179 170 95m6 M24/50 25 9 14 150 448 268 180 98 95 360 180 180 90 909045 391 181 210 105m6 M24/50 28 10 16 190 463 283 180 108 105 370 185 185 105 1059050 411 201 210 110m6 M24/50 28 10 16 190 503 303 200 108 105 410 205 205 105 1059055 411 201 210 120m6 M24/50 32 11 18 185 528 323 205 123 120 410 205 205 115 115


903090359040904590509055

Unit: mm

(blank)T

K



SizeShaft

Arrangement

Low Speed ShaftType



C - 184


SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

Size A B C D E1 E2 E3 G H RI J K L M1 M2 N N1 NP O P P1 X Y

9060 701 299 540 251 530 282 265 35 35 160 35 180 970 140 118 277.5 35 117 460 190 213 92 6499065 747 338 586 290 600 317 300 35 35 175 35 180 1055 175 153 277.5 38 117 530 190 213 92 6959070 809 336 630 283 600 317 300 40 40 175 42 215 1115 155 128 304 38 117 520 215 233 109 7529075 862 383 683 330 670 352 335 40 52 190 42 220 1215 195 163 304 40 117 590 215 233 109 8059080 932 378 725 325 670 352 335 40 52 190 42 220 1275 170 140 322.5 45 117 590 230 268 126 8709085 988 422 781 369 750 392 375 40 52 215 42 220 1375 210 180 322.5 40 117 670 230 268 126 926


RC1 RC2 Wt.kg

OilQty.


X2 Y2 Z2 L29060 221 301 80 35k6 M12/28 10 5 8 70 1" 1" 660 329065 221 301 80 35k6 M12/28 10 5 8 70 1" 1" 815 409070 244 354 110 40k6 M16/36 12 5 8 95 1" 1" 950 539075 244 354 110 40k6 M16/36 12 5 8 95 1" 1" 1170 679080 264 374 110 45k6 M16/36 14 5.5 9 95 1" 1" 1360 659085 264 374 110 45k6 M16/36 14 5.5 9 95 1" 1" 1620 89

H

NQ

RQ

RL2P1

PP

NP

N1

C

A

4- J

RC1

M1

M1

O

K K

LDG GYRC2

BM

2

E1

RI

E2 E3

X

Z2

W2Y

2 X2

S

High Speed Shaft

Unit: mm




Nomenclature

RL RR


Slow Speed Shaft



C - 185

H

L

L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2



Backstop(Option)





9060 440 230 210 125m6 M24/50 32 11 18 185 583 353 230 128 125 470 235 235 125 1239065 484 234 250 140m6 M30/60 36 12 20 225 594 359 235 143 140 480 240 240 145 1439070 509 259 250 145m6 M30/60 36 12 20 225 644 384 260 148 145 530 265 265 145 1439075 562 262 300 160m6 M30/60 40 13 22 275 651 386 265 158 155 530 265 265 150 1489080 582 282 300 165m6 M30/60 40 13 22 275 714 429 285 173 170 570 285 285 165 1639085 585 285 300 175m6 M30/60 45 15 25 270 714 429 285 183 180 570 285 285 175 173


906090659070907590809085

Unit: mm

P V D P 4 - -

RLRR

906090659070907590809085

PV

DP

90609085

4PARAMAX

VerticalSplit


(blank)T

K



SizeShaft

Arrangement

Low Speed ShaftType




SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles

C - 186

C

H N

NP

N1

PP

P1

QR

L2Q

RC2R

E3 E2

X

4- J

AB

G

E1

C1

E4

GK K

L

MM

O

D Y

RC1

RI

Z2

W2Y

2 X2

S

High Speed Shaft

4. Refer to the page D-16 for dimensions not shown in these drawings.5. Refer to the page D -31 for the dimension of optional parts.

3. Shaft arrangement RR is equipped with oil gauge. Refer to the page D-31.


Size A B C C1 D E1 E2 E3 E4 G H RI J K L M N NP N1 O P P1 X Y

9090 1070 410 795 837 345 750 421 449 430 60 50 215 42 180 1440 130 388 137 50 630 285 367 142 9759095 1100 440 825 867 375 800 446 474 430 60 50 235 42 200 1500 140 388 137 50 680 285 367 142 10059100 1204 450 901 950 375 850 471 499 500 70 55 235 48 200 1610 150 428 137 60 710 325 409 162 10959105 1238 485 935 984 410 900 496 524 500 70 55 260 48 220 1680 160 428 137 60 760 325 409 162 11309110 1354 500 1001 1050 420 950 521 500 75 60 265 56 220 1810 170 55 800 355 442 162 12409115 1403 550 1050 1099 470 1000 546 500 75 60 280 56 250 1910 180 55 850 355 442 162 1290


RC1 RC2 Wt.kg

OilQty.


X2 Y2 Z2 L29090 330 440 110 50k6 M16/36 14 5.5 9 95 1" 1 1/2" 2170 1109095 330 440 110 50k6 M16/36 14 5.5 9 95 1" 1 1/2" 2430 1409100 375 515 140 60m6 M20/42 18 7 11 125 1" 1 1/2" 2920 1709105 375 515 140 60m6 M20/42 18 7 11 125 1" 1 1/2" 3400 2109110 405 545 140 60m6 M20/42 18 7 11 125 1" 1 1/2" 4050 2409115 405 545 140 60m6 M20/42 18 7 11 125 1" 1 1/2" 4570 295

Unit: mm


L1U1

TU1T1

V1

W1

Z1Y1

X1

TU2U2 T2

V3V2

C - 187

Slow Speed Shaft


Nomenclature



H

L



Backstop(Option)


P V D P 4 - -

RLRR

909090959100910591109115

PV

DP

90909115

4PARAMAX

VerticalSplit



909090959100910591109115



TU2 T2 U2 V2 V3X1 Y1 Z1 L1

9090 650 350 300 180m6 M30/60 45 15 25 270 844 494 350 193 1909095 700 350 350 190m6 M30/60 45 15 25 320 859 509 350 203 2009100 740 390 350 200m6 M30/60 45 15 25 320 934 544 390 213 2109105 740 390 350 220m6 M30/60 50 17 28 320 949 559 390 223 2209110 770 420 350 220m6 M30/60 50 17 28 320 1030 610 420 243 2409115 830 420 410 240m6 M30/60 56 20 32 375 1065 645 420 253 250

Unit: mm

(blank)T


(Shrink Disk type)

SizeShaft

Arrangement

Low Speed ShaftType



C - 188

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles


C

L2R Q

QR

Y1

PK2 K2

BA

K3

DG

Y4

GL

K3

4-

J2Y2E1

HL

F

K1 K14- J1

H1

Y3

E

H2

QR

FDFC

FBFA

Z2

W2

Y2 X2

S

RC


High Speed Shaft


9015 296 160 194 90 135 270 298 70 50 22 15 15 70 35 95 440 205 170 180 170 3009025 347 175 227 95 155 310 338 80 55 25 19 19 75 40 110 505 235 195 210 195 3459030 407 200 264 110 160 320 348 90 60 28 24 24 85 50 120 590 265 215 200 215 4109035 438 219 295 129 185 370 398 90 60 28 24 24 100 50 120 640 265 215 250 215 4609040 468 235 306 120 200 400 430 115 75 30 28 28 100 60 150 685 315 255 260 255 4559045 507 256 345 141 220 440 470 115 75 30 28 28 120 60 150 745 315 255 300 255 5159050 538 255 358 138.5 210 420 450 116.5 75 32 28 28 110 60 150 775 345 285 280 285 5429055 577 286 397 171 245 490 520 115 75 32 28 28 135 60 150 845 345 285 350 285 615


RC Wt.kg

OilQty.



9015 131 211 80 30k6 M10/22 8 4 7 70 129 125 50 30 3/4" 100 99025 146 226 80 35k6 M12/28 10 5 8 70 143 140 50 30 3/4" 140 139030 159 269 110 40k6 M16/36 12 5 8 95 169 140 80 52 3/4" 195 169035 159 269 110 40k6 M16/36 12 5 8 95 169 140 80 52 3/4" 215 229040 174 284 110 50k6 M16/36 14 5.5 9 95 188 160 80 52 1" 285 299045 174 284 110 50k6 M16/36 14 5.5 9 95 188 160 80 52 1" 345 369050 193 303 110 55m6 M20/42 16 6 10 95 208 160 80 52 1" 415 369055 193 303 110 55m6 M20/42 16 6 10 95 208 160 80 52 1" 475 47

Unit: mm4. Refer to the page D-12 for dimensions not shown in these drawings.5. Refer to the page D-26 for the dimension of optional parts.

DIMENSIONS Parallel Shaft Double Reduction Upright Mounting 9015 9055

3. Always remove fan hood when tightening mounting bolt.


Nomenclature

C - 189


Slow Speed Shaft



H

L

L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2



Backstop(Option)


P W A P 2 - -

RLRRRBLRLLLBBLBRBB

90159025903090359040904590509055

PW

AP

90159055

2PARAMAX

UprightMonoblock

ParallelDouble

Reduction






90159025903090359040904590509055

Unit: mm

(blank)T

K



(blank)F


SizeShaft

Arrangement

Low Speed ShaftType



C - 190

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles



9060 622 299 414 151 265 530 577 135 35 35 180 885 310 380 133 6159065 668 338 460 190 300 600 647 135 35 35 180 970 310 380 133 7009070 720 336 482 163 300 600 647 160 40 42 215 1020 350 430 138 7009075 773 383 535 210 335 670 717 160 52 42 220 1120 350 430 138 8009080 813 378 556 205 335 670 717 160 52 42 220 1155 380 460 169 8359085 869 422 612 249 375 750 797 160 52 42 220 1255 380 460 169 935


RC Wt.kg

OilQty.



9060 220 360 140 65m6 M20/42 18 7 11 125 240 200 105 65 1" 610 539065 220 360 140 65m6 M20/42 18 7 11 125 240 200 105 65 1" 735 679070 245 385 140 75m6 M20/42 20 7.5 12 125 274 225 105 65 1" 860 849075 245 385 140 75m6 M20/42 20 7.5 12 125 274 225 105 65 1" 1110 1009080 264 434 170 85m6 M20/42 22 9 14 150 296 225 135 95 1" 1240 1099085 264 434 170 85m6 M20/42 22 9 14 150 296 225 135 95 1" 1500 137

Unit: mm

EH

O P

QR

FAFDFC

FBC

L2R

QRQ

GKD

YGK4- J

BA

F

LX

E1

Z2

W2

Y2 X2

S

RC


High Speed Shaft

4. Refer to the page D-14 for dimensions not shown in these drawings.5. Refer to the page D-29 for the dimension of optional parts.




Nomenclature

C - 191


Slow Speed Shaft



H

L

L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2



Backstop(Option)





9060 440 230 210 125m6 M24/50 32 11 18 185 583 353 230 128 125 470 235 235 125 1239065 484 234 250 140m6 M30/60 36 12 20 225 594 359 235 143 140 480 240 240 145 1439070 509 259 250 145m6 M30/60 36 12 20 225 644 384 260 148 145 530 265 265 145 1439075 562 262 300 160m6 M30/60 40 13 22 275 651 386 265 158 155 530 265 265 150 1489080 582 282 300 165m6 M30/60 40 13 22 275 714 429 285 173 170 570 285 285 165 1639085 585 285 300 175m6 M30/60 45 15 25 270 714 429 285 183 180 570 285 285 175 173


906090659070907590809085

P W D P 2 W - -

9060906590709075907590809085

PW

DP

90609085

2PARAMAX

UprightSplit

ParallelDouble

Reduction

WW

all Mount

RLRRRBLRLLLBBLBRBB

Unit: mm

(blank)T

K



(blank)F


SizeShaft

Arrangement

Low Speed ShaftType



C - 192

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles


C

QRR

L2Q

Y1K2 K2

P

QRFA

FBFD

FC

EH2

Y3

HL

AB

DF

GL

G4- J

2

K3

K3

E1

Y4

RC

4- J1K1 K1

Y2H

1

Z2

W2

Y2 X2

S


High Speed Shaft


9015 339 160 257 90 135 270 298 70 50 22 15 15 70 35 95 485 205 170 180 170 3459025 409 175 306 95 155 310 338 80 55 25 19 19 75 40 110 570 235 195 210 195 4109030 454 200 343 110 160 320 348 90 60 28 24 24 85 50 120 640 265 215 200 215 4609035 485 219 374 129 185 370 398 90 60 28 24 24 100 50 120 690 265 215 250 215 5109040 541 235 398 120 200 400 430 115 75 30 28 28 100 60 150 759 315 255 260 255 5299045 577 256 437 141 220 440 470 115 75 30 28 28 120 60 150 819 315 255 300 255 5899050 610 255 467 138.5 210 420 450 116.5 75 32 28 28 110 60 150 848 345 285 280 285 6159055 649 286 506 171 245 490 520 115 75 32 28 28 135 60 150 918 345 285 350 285 688


RC Wt.kg

OilQty.



9015 130 190 60 25k6 M10/22 8 4 7 50 111 125 30 10 3/4" 105 119025 144 204 60 28k6 M10/22 8 4 7 50 129 125 30 10 3/4" 150 159030 161 241 80 30k6 M10/22 8 4 7 70 140 125 50 30 3/4" 205 209035 161 241 80 30k6 M10/22 8 4 7 70 150 140 50 22 3/4" 225 259040 176 256 80 35k6 M12/28 10 5 8 70 170 140 50 22 1" 305 359045 176 256 80 35k6 M12/28 10 5 8 70 170 140 50 22 1" 375 439050 194 304 110 40k6 M16/36 12 5 8 95 172 140 80 52 1" 445 459055 194 304 110 40k6 M16/36 12 5 8 95 172 140 80 52 1" 505 59

Unit: mm4 Refer to the page D-13 for dimensions not shown in these drawings.5 Refer to the page D-26 for the dimension of optional parts.

DIMENSIONS Parallel Shaft Triple Reduction Upright Mounting 9015 9055



Nomenclature

C - 193


Slow Speed Shaft



H

L

L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2



Backstop(Option)


P W A P 3 - -

90159025903090359040904590509055

PW

AP

90159055

3PARAMAX

UprightMonoblock

ParallelTriple

Reduction

RLRRRBLRLLLBBLBRBB






90159025903090359040904590509055

Unit: mm

(blank)T

K



(blank)F


SizeShaft

Arrangement

Low Speed ShaftType



C - 194

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles


Size A B C D E E1 F G H J K L O P P1 Y

9060 702 299 540 151 265 530 577 135 35 35 180 970 310 380 216 7009065 748 338 586 190 300 600 647 135 35 35 180 1055 310 380 216 7859070 810 336 630 163 300 600 647 160 40 42 215 1115 350 430 233 7959075 863 383 683 210 335 670 717 160 52 42 220 1215 350 430 233 8959080 933 378 725 205 335 670 717 160 52 42 220 1275 380 460 285 9559085 989 422 781 249 375 750 797 160 52 42 220 1375 380 460 285 1055


RC Wt.kg

OilQty.



9060 219 329 110 50k6 M16/36 14 5.5 9 95 199 160 80 52 1" 660 689065 219 329 110 50k6 M16/36 14 5.5 9 95 199 160 80 52 1" 815 859070 244 354 110 55m6 M20/42 16 6 10 95 221 160 80 52 1" 940 1069075 244 354 110 55m6 M20/42 16 6 10 95 221 160 80 52 1" 1160 1209080 265 405 140 65m6 M20/42 18 7 11 125 247 200 105 65 1" 1350 1309085 265 405 140 65m6 M20/42 18 7 11 125 247 200 105 65 1" 1610 176

Unit: mm

EH

O P

QRFA

FBFD

FCC

L2R Q

QR

KD

GY

GL

K4- J

BA

FE1

RC

X

Z2

W2

Y2 X2

S


High Speed Shaft





Nomenclature

C - 195


Slow Speed Shaft



H

L

L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2



Backstop(Option)





9060 440 230 210 125m6 M24/50 32 11 18 185 583 353 230 128 125 470 235 235 125 1239065 484 234 250 140m6 M30/60 36 12 20 225 594 359 235 143 140 480 240 240 145 1439070 509 259 250 145m6 M30/60 36 12 20 225 644 384 260 148 145 530 265 265 145 1439075 562 262 300 160m6 M30/60 40 13 22 275 651 386 265 158 155 530 265 265 150 1489080 582 282 300 165m6 M30/60 40 13 22 275 714 429 285 173 170 570 285 285 165 1639085 585 285 300 175m6 M30/60 45 15 25 270 714 429 285 183 180 570 285 285 175 173


906090659070907590809085

P W D P 3 W - -

906090659070907590809085

WW

all MountP

WD

P90609085

3PARAMAX

UprightSplit

ParallelTriple

Reduction

Unit: mm

RLRRRBLRLLLBBLBRBB

(blank)T

K



(blank)F


SizeShaft

Arrangement

Low Speed ShaftType



C - 196

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles


EH2

Y3

X

C

QRR

L2Q

Y1K2 K2

P

HL

AB

D

F

GL

GK3

K3

E1

Y4

RC

4- J1

Y2K1 K1

H1

4- J

2

Z2

W2

Y2 X2

S

High Speed Shaft

Size A B C D E E1 F G H1 H2 J1 J2 K1 K2 K3 L P X Y1 Y2 Y3 Y4

9030 454 200 343 110 160 320 348 90 60 28 24 24 85 50 120 640 265 223 215 200 215 4609035 485 219 374 129 185 370 398 90 60 28 24 24 100 50 120 690 265 248 215 250 215 5109040 541 235 398 120 200 400 430 115 75 30 28 28 100 60 150 759 315 279 255 260 255 5299045 577 256 437 141 220 440 470 115 75 30 28 28 120 60 150 819 315 299 255 300 255 5899050 610 255 467 138.5 210 420 450 116.5 75 32 28 28 110 60 150 848 345 289 285 280 285 6159055 649 286 506 171 245 490 520 115 75 32 28 28 135 60 150 918 345 324 285 350 285 688


RC Wt.kg

OilQty.


X2 Y2 Z2 L29030 159 219 60 25k6 M10/22 8 4 7 50 3/4" 210 209035 159 219 60 25k6 M10/22 8 4 7 50 3/4" 230 259040 175 135 60 28k6 M10/22 8 4 7 50 1" 310 359045 175 235 60 28k6 M10/22 8 4 7 50 1" 380 439050 195 275 80 30k6 M10/22 8 4 7 70 1" 450 469055 195 275 80 30k6 M10/22 8 4 7 70 1" 510 59

Unit: mm



DIMENSIONS Parallel Shaft Quadruple Reduction Upright Mounting 9030 9055


Nomenclature

C - 197


Slow Speed Shaft



H

L

L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2



Backstop(Option)


P W A P 4 - -

903090359040904590509055

PW

AP

90309055

4PARAMAX

UprightMonoblock


RLRRRBLRLLLBBLBRBB




9030 330 160 170 80m6 M20/42 22 9 14 150 393 233 160 83 80 330 165 165 75 759035 330 160 170 90m6 M20/42 25 9 14 150 403 243 160 88 85 330 165 165 85 859040 349 179 170 95m6 M24/50 25 9 14 150 448 268 180 98 95 360 180 180 90 909045 391 181 210 105m6 M24/50 28 10 16 190 463 283 180 108 105 370 185 185 105 1059050 411 201 210 110m6 M24/50 28 10 16 190 503 303 200 108 105 410 205 205 105 1059055 411 201 210 120m6 M24/50 32 11 18 185 528 323 205 123 120 410 205 205 115 115


903090359040904590509055

Unit: mm

(blank)T

K



SizeShaft

Arrangement

Low Speed ShaftType



C - 198

SpeedReducer

Dim

ensi

onTa

bles

Sele

ctio

nTa

bles


Size A B C D E E1 F G H J K L O P X X1 Y

9060 702 299 540 151 265 530 577 135 35 35 180 970 310 380 73 357 7009065 748 338 586 190 300 600 647 135 35 35 180 1055 310 380 73 392 7859070 810 336 630 163 300 600 647 160 40 42 215 1115 350 430 67 409 7959075 863 383 683 210 335 670 717 160 52 42 220 1215 350 430 67 444 8959080 933 378 725 205 335 670 717 160 52 42 220 1275 380 460 93 461 9559085 989 422 781 249 375 750 797 160 52 42 220 1375 380 460 93 501 1055


RC Wt.kg

OilQty.


X2 Y2 Z2 L29060 221 301 80 35k6 M12/28 10 5 8 70 1" 660 699065 221 301 80 35k6 M12/28 10 5 8 70 1" 815 869070 244 354 110 40k6 M16/36 12 5 8 95 1" 950 1089075 244 354 110 40k6 M16/36 12 5 8 95 1" 1170 1229080 264 374 110 45k6 M16/36 14 5.5 9 95 1" 1360 1309085 264 374 110 45k6 M16/36 14 5.5 9 95 1" 1620 175

EH

O P

X1C

L2R Q

QR

KD

GY

GL

K4- J

BA

FE1

RC

X

Z2W2

Y2 X2

S

High Speed Shaft

Unit: mm

4 Refer to the page D-29 for the dimension of optional parts.




Nomenclature

C - 199


Slow Speed Shaft



H

L

L1U1

TU1T1

V1

V5

V4

TU4U4 T4

W1

Z1Y1

X1

TU2U2 T2

V3V2



Backstop(Option)





9060 440 230 210 125m6 M24/50 32 11 18 185 583 353 230 128 125 470 235 235 125 1239065 484 234 250 140m6 M30/60 36 12 20 225 594 359 235 143 140 480 240 240 145 1439070 509 259 250 145m6 M30/60 36 12 20 225 644 384 260 148 145 530 265 265 145 1439075 562 262 300 160m6 M30/60 40 13 22 275 651 386 265 158 155 530 265 265 150 1489080 582 282 300 165m6 M30/60 40 13 22 275 714 429 285 173 170 570 285 285 165 1639085 585 285 300 175m6 M30/60 45 15 25 270 714 429 285 183 180 570 285 285 175 173


906090659070907590809085

P W D P 4 W - -

906090659070907590809085

PW

DP

90609085

4PARAMAX

UprightSplit


WW

all Mount

Unit: mm

RLRRRBLRLLLBBLBRBB

(blank)T

K



SizeShaft

Arrangement

Low Speed ShaftType



C - 200

Lubricant and Installation D- 2Painting Specifications

and Rust Proof Standard D- 3 Moment of Inertia

of Right Angle Shaft D- 4 GD2 of Right Angle Shaft D- 6 Moment of Inertia

of Parallel Shaft D- 8 GD2 of Parallel Shaft D-10Supplementary Dimension

Drawing D-12Supplementary Matters

to Hollow Shaft D-17Hollow Shaft Related

Dimensions D-18Cooling Fan Dimension D-20Option Dimension D-24Motor Terminal Box D-32Motor Flange Dimension D-34Formula of Drive System D-36

D

TECHNICAL DATA

D - 2

Technical

Com

mon (1) Consult us when PARAMAX DRIVE is to be installed on an inclined surface or on a ceiling.

Additional lubrication system may be necessary.(2) Install PARAMAX DRIVE horizontally on a sufficiently rigid base. When the unit is made for inclined installation according to your specification, do not install it at any other angle other than the specified angle.(3) Installation bolts for PARAMAX DRIVE shall be equivalent to JIS strength classification 10.9. Consult us when the force that pushes up PARAMAX DRIVE is to be applied.(4) Refer to the maintenance manual attached to the unit for other installation notes.

Recommended Lubricants

Slow Speed Shaft

Speed

Ambient Temperature

-10 deg to +15 deg

0 deg to +30 deg

+10 deg to +50 deg

Over100r/min

ISO*AGMA

VG682EP

VG1504EP

VG2205EP

Under100r/min

ISO*AGMA

VG1003EP

VG2205EP

VG3206EP

Brand BP CASTROL CHEVRON TEXACO EXXON MOBIL SHELL TOTAL

ISO VG68AGMA 2EP

ENERGOLGR-XP-68

ALPHASP68

OPTIGEARBM68

TRIBOL1100/68

GEARCOMPOUNDS

EP68

MEROPAWM68

SPARTANEP68

MOBIL-GEAR

626

OMALA68

CARTEREP68

ISO VG100 AGMA 3EP

ENERGOLGR-XP-100

ALPHASP100

OPTIGEARBM100

TRIBOL1100/100

GEARCOMPOUNDS

EP100

MEROPAWM100

SPARTANEP100

MOBIL-GEAR

627

OMALA100

CARTEREP100

ISO VG150AGMA 4EP

ENERGOLGR-XP-150

ALPHASP150

OPTIGEARBM150

TRIBOL1100/150

GEARCOMPOUNDS

EP150

MEROPAWM150

SPARTANEP150

MOBIL-GEAR

629

OMALA150

CARTEREP150

ISO VG220VAGMA 5EP

ENERGOLGR-XP-220

ALPHASP220

OPTIGEARBM220

TRIBOL1100/220

GEARCOMPOUNDS

EP220

MEROPAWM220

SPARTANEP220

MOBIL-GEAR

630

OMALA220

CARTEREP220

ISO VG320AGMA 6EP

ENERGOLGR-XP-320

ALPHASP320

OPTIGEARBM320

TRIBOL1100/320

GEARCOMPOUNDS

EP320

MEROPAWM320

SPARTANEP320

MOBIL-GEAR

632

OMALA320

CARTEREP320

Bearing greaseENER-

GREASELS EP2

SPHEEROLAP3

Olista Long-time 3EP

TRIBOL 3020/

1000-2

DURALITHGREASE 68

MULTI-FAK EP2

BEACONEP2

MOBIL-PLEX

48

ALVANIAEP2

MULTISEP2

Lubricant

Installation

PARAMAX DRIVE is shipped without lubrication oil.Supply oil within the range shown on the dip stick before operation.The table on the right shows appropriate viscosity of oilbased on ISO and AGMA for respective ambienttemperatures and slow speed shaft r/min.When the ambient temperature is lower than -10 deg orhigher than +50 deg, a heating or cooling unit isnecessary, in general.* Kinetic Viscosity (cSt) at ISO 40 deg.

Gea

r Oil

TECHNICAL DATA Lubricant, Installation

D - 3

1. Standard rust proofing specifications(1) Outside rust proofing

Rust proofing oil has been applied to products before shipment. Check the rust proofing conditions every 6 months after shipment, and conduct rust proofing treatment, as necessary.

Rust proofing period 6 months

Storage condition

Generally to be stored inside the shop or warehouse, relatively free of humidity, dust, extreme temperature fluctuation, corrosive gas, and similar atmosphere. After shipment, the product shall be operated 5-10 minutes every 2-3 months with recommended lubricants.

2. Export rust proofing specificationsConsult us for export rust proofing when export specifications or severe specifications are required.

Note: SUMITOMO standard color is Munsell 6.5PB 3.6/8.2

Rust proofing treatment has been conducted on all completely assembled models, prior to shipment.

Painting Specifications

Rust Proof Standard

TECHNICAL DATA Painting Specifications, Rust Proof Standard

PaintingArea

SurfaceConditioning

Kind of Painting Painting Specification ofApplication

Class Painting of Finish Coat Type Coating Thickness µ Type of Coating

OutsidePainting

Cast IronClass 1

Standardpainting

Under 1 20～ 40 Modified alkyd resin Standard under coat

Phallic acid Finish 1 15～ 30 Alkyd resin paint Standard finish coatStandard

exportpainting

Under 2 40～ 80 Modified alkyd resinExport standard

Modified epoxy Finish 1 15～ 30 Vinyl modified epoxy resin

Specialpainting

(Includingrust-proofand heat resistingpainting)One layer

ofUnigrand

PTC Primer as the first

primer

Modified epoxyUnder 1 20～ 40 Vinyl modified epoxy resin Moderate corrosive atmosphere,

seaside, outdoor humid atmosphere, chemical plant area, ... etc.Finish 2 30～ 60 Vinyl modified epoxy resin

Long of oil phallicUnder 2 40～ 80 Lead rust preventive paint Ocean-going vessel & boat,

bridge, seaside, outdoor humid atmosphere, ... etc.Finish 2 30～ 60 Synthetics resin paint

Chloride rubber

Under 2 40～ 80 Lead rust preventive paintOcean-going vessel & boat,

bridge, seaside, outdoor humid atmosphere, ... etc.

Second 1 20～ 40 Phenol M.I.O paint

Finish 2 30～ 60 Chloride rubber paint

PhenolUnder 2 40～ 80 Lead rust preventive paint In-and-outdoor of acid treating

plant and chemical plant etc...Finish 2 30～ 60 Phenol resin enamel

Heat-proof silverUnder 1 20～ 40 Lead rust preventive paint Heating furnace (120 deg),

... etc.Finish 1 15～ 30 Aluminum paint

Steel Plate Class 2

Extrarust-proofpainting

EpoxyUnder 2 40～ 80 Special permeability epoxy aluminium paint Indoor anti-corrosion area,

Chemical plantFinish 3 120～ 240 Polyamide epoxy

PolyurethaneUnder 2 40～ 80 Special permeability epoxy aluminium paint Outdoor anti-corrosion area,

Chemical plantFinish 3 45～ 90 Polyisocianate urethane resin paintExtra

rust-proofpainting(Sand

blast under coating)

Thick film epoxy 5 250～ 350 Thick film type modified epoxy resin paint Submersible equipment, marine structure, ... etc.

InsidePainting

Cast IronClass 1Steel

Plate Class 3

Standardpainting 1 20～ 40 Modified alkyd resin Standard inside painting

Nominalreduction ratio

Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085

6.3 0.00423 0.00805 0.0157 0.0333 0.0662 0.146 0.301 0.5027.1 0.00400 0.00750 0.0153 0.0313 0.0621 0.135 0.281 0.4758 0.00288 0.00508 0.0137 0.0181 0.0283 0.0374 0.0603 0.0745 0.130 0.166 0.253 0.337 0.480 0.5629 0.00275 0.00475 0.0134 0.0175 0.0269 0.0346 0.0577 0.0681 0.124 0.149 0.242 0.311 0.464 0.524

10 0.00218 0.00488 0.0111 0.0152 0.0201 0.0311 0.0492 0.0653 0.0981 0.1426 0.203 0.274 0.398 0.51611.2 0.00210 0.00468 0.0109 0.0149 0.0193 0.0292 0.0475 0.0614 0.0939 0.1319 0.196 0.259 0.387 0.49312.5 0.00188 0.00390 0.00843 0.0120 0.0138 0.0217 0.0357 0.0525 0.0691 0.1056 0.139 0.216 0.268 0.42214 0.00183 0.00375 0.00830 0.0118 0.0133 0.0206 0.0345 0.0499 0.0664 0.0990 0.135 0.207 0.261 0.40716 0.00133 0.00258 0.00583 0.00908 0.0107 0.0149 0.0243 0.0379 0.0514 0.0739 0.102 0.147 0.194 0.28218 0.00130 0.00250 0.00575 0.00890 0.0104 0.0142 0.0237 0.0362 0.0497 0.0697 0.0987 0.141 0.190 0.27320 0.00620 0.0114 0.0257 0.0546 0.107 0.203

22.4 0.00610 0.0109 0.0246 0.0518 0.103 0.198


Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085

20 0.00378 0.00693 0.0140 0.0289 0.0590 0.12122.4 0.00373 0.00670 0.0136 0.0278 0.0571 0.11825 0.00338 0.00403 0.00608 0.00735 0.0115 0.0149 0.0237 0.0310 0.0515 0.0624 0.106 0.12628 0.00333 0.00395 0.00595 0.00705 0.0112 0.0142 0.0230 0.0292 0.0503 0.0600 0.104 0.123

31.5 0.00193 0.00353 0.00433 0.00635 0.00835 0.0120 0.0183 0.0248 0.0359 0.0537 0.0700 0.11035.5 0.00190 0.00350 0.00425 0.00618 0.00818 0.0116 0.0178 0.0238 0.0351 0.0521 0.0689 0.10840 0.00178 0.00203 0.00403 0.00450 0.00738 0.00868 0.0161 0.0191 0.0328 0.0373 0.0644 0.072245 0.00175 0.00200 0.00398 0.00440 0.00730 0.00843 0.0159 0.0184 0.0323 0.0363 0.0636 0.070850 0.00118 0.00183 0.00233 0.00413 0.00555 0.00758 0.0120 0.0166 0.0239 0.0337 0.0484 0.065956 0.00115 0.00183 0.00230 0.00405 0.00550 0.00743 0.0118 0.0162 0.0236 0.0331 0.0479 0.064963 0.00110 0.00120 0.00220 0.00240 0.00423 0.00568 0.00893 0.01230 0.0173 0.0245 0.0349 0.049371 0.00110 0.00120 0.00218 0.00235 0.00418 0.00558 0.00883 0.01203 0.0171 0.0241 0.0346 0.048780 0.00113 0.00225 0.00430 0.00910 0.0176 0.035590 0.00113 0.00223 0.00423 0.00895 0.0174 0.0351

100


Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085

637180 0.00295 0.00283 0.00553 0.0113 0.022990 0.00293 0.00280 0.00548 0.0112 0.0227

100 0.00215 0.00298 0.00268 0.00288 0.00523 0.00565 0.0108 0.0115 0.0219 0.0233112 0.00215 0.00295 0.00265 0.00283 0.00518 0.00555 0.0107 0.0114 0.0218 0.0230125 0.00203 0.00218 0.00243 0.00270 0.00473 0.00530 0.00923 0.0110 0.0188 0.0222140 0.00203 0.00215 0.00243 0.00268 0.00470 0.00523 0.00918 0.0109 0.0188 0.0220160 0.00205 0.00120 0.00245 0.00243 0.00475 0.00480 0.00930 0.00993 0.0190180 0.00203 0.00120 0.00243 0.00240 0.00473 0.00478 0.00925 0.00990 0.0189200 0.00118 0.00123 0.00235 0.00245 0.00468 0.00970 0.0100224 0.00118 0.00120 0.00233 0.00243 0.00465 0.00483 0.00968 0.0100250 0.00110 0.00118 0.00223 0.00235 0.00428 0.00473 0.00893 0.00978280 0.00110 0.00118 0.00220 0.00235 0.00425 0.00470 0.00893 0.00973315 0.00110 0.00113 0.00220 0.00223 0.00420 0.00430 0.00885 0.00898355 0.00108 0.00110 0.00215 0.00223 0.00418 0.00428 0.00868 0.00895400 0.00110 0.00220 0.00423 0.00885450 0.00108 0.00218 0.00418 0.00868500

D - 4

Technical

Com

mon

Right Angle Shaft Double Reduction

Right Angle Shaft Quadruple Reduction

Right Angle Shaft Triple Reduction

TECHNICAL DATA Moment of Inertia Right Angle Shaft

Size of Reducer Nominalreduction ratio9090 9095 9100 9105 9110 9115 9118 9121 9126 9128 9131 9136

6.37.18

1.18 2.23 4.16 91.16 2.20 3.98 10

0.871 1.68 3.10 11.20.858 1.65 2.99 12.50.638 1.22 2.28 140.630 1.20 2.21 160.464 0.894 1.68 180.459 0.884 1.63 20

22.4


0.240 0.460 0.889 200.237 0.249 0.453 0.476 0.866 0.926 22.40.212 0.245 0.401 0.470 0.774 0.896 0.959 250.210 0.218 0.397 0.412 0.759 0.798 2.18 2.21 4.48 4.53 280.141 0.215 0.264 0.408 0.454 0.779 0.701 2.12 2.15 4.24 4.28 31.50.140 0.144 0.262 0.271 0.445 0.468 0.731 1.29 1.31 2.39 3.31 3.34 35.50.129 0.143 0.241 0.268 0.409 0.456 0.615 1.25 1.27 2.33 3.16 3.18 400.129 0.132 0.239 0.245 0.403 0.418 0.559 0.939 0.952 1.78 2.41 2.43 45

0.0931 0.131 0.175 0.244 0.311 0.411 0.443 0.917 0.928 1.74 2.32 2.33 500.0927 0.0945 0.174 0.178 0.307 0.317 0.408 0.683 0.691 1.28 1.76 1.77 560.0664 0.0940 0.127 0.177 0.225 0.312 0.322 0.668 0.675 1.26 1.70 1.71 630.0661 0.0673 0.126 0.129 0.223 0.229 0.300 0.509 0.515 0.934 710.0642 0.0669 0.121 0.128 0.211 0.226 0.232 0.500 0.505 0.919 80

0.0648 0.123 0.214 0.218 90100


630.979 0.987 710.819 0.825 80

0.0467 0.0962 0.108 0.235 0.238 0.502 0.713 0.718 900.0452 0.0472 0.0930 0.0972 0.102 0.110 0.139 0.230 0.233 0.492 0.688 0.692 1000.0451 0.0455 0.0927 0.0937 0.101 0.104 0.123 0.199 0.201 0.429 0.505 0.508 1120.0409 0.0454 0.0846 0.0934 0.0908 0.102 0.105 0.196 0.198 0.423 0.489 0.492 1250.0408 0.0411 0.0844 0.0850 0.0902 0.0918 0.100 0.152 0.154 0.281 0.448 0.450 1400.0243 0.0410 0.0493 0.0849 0.0527 0.0910 0.0927 0.150 0.151 0.277 0.438 0.439 1600.0242 0.0244 0.0492 0.0496 0.0523 0.0533 0.0890 0.137 0.138 0.252 0.326 0.327 1800.0183 0.0244 0.0370 0.0495 0.0393 0.0528 0.0693 0.136 0.136 0.250 0.319 0.320 2000.0183 0.0184 0.0369 0.0371 0.0391 0.0397 0.0544 0.0978 0.0983 0.143 0.234 0.235 2240.0172 0.0183 0.0349 0.0371 0.0364 0.0394 0.0516 0.0969 0.0974 0.141 0.230 0.231 2500.0172 0.0172 0.0348 0.0350 0.0363 0.0367 0.0501 0.0693 0.0696 0.131 0.217 0.217 2800.0171 0.0172 0.0345 0.0350 0.0355 0.0365 0.0477 0.0688 0.0690 0.130 3150.0163 0.0171 0.0334 0.0346 0.0341 0.0357 0.0360 0.0664 0.0667 0.125 355

0.0164 0.0334 0.0343 0.0345 400450500

D - 5

Unit: kg m2

Unit: kg m2

Unit: kg m2

TECHNICAL DATA Moment of Inertia Right Angle Shaft


Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085

6.3 0.0169 0.0322 0.0629 0.133 0.265 0.584 1.20 2.017.1 0.0160 0.0300 0.0610 0.125 0.248 0.541 1.13 1.908 0.0115 0.0203 0.0548 0.0723 0.113 0.150 0.241 0.298 0.522 0.663 1.01 1.35 1.92 2.259 0.0110 0.0190 0.0536 0.0699 0.108 0.138 0.231 0.272 0.495 0.594 0.968 1.24 1.86 2.10

10 0.0087 0.0195 0.0443 0.0609 0.0805 0.1242 0.197 0.261 0.392 0.570 0.812 1.10 1.59 2.0611.2 0.0084 0.0187 0.0436 0.0594 0.0772 0.1167 0.190 0.246 0.376 0.528 0.783 1.04 1.55 1.9712.5 0.0075 0.0156 0.0337 0.0481 0.0553 0.0869 0.143 0.210 0.276 0.423 0.556 0.865 1.07 1.6914 0.0073 0.0150 0.0332 0.0472 0.0532 0.0825 0.138 0.200 0.266 0.396 0.538 0.827 1.04 1.6316 0.0053 0.0103 0.0233 0.0363 0.0428 0.0594 0.0972 0.152 0.206 0.296 0.407 0.590 0.777 1.1318 0.0052 0.0100 0.0230 0.0356 0.0414 0.0566 0.0946 0.145 0.199 0.279 0.395 0.566 0.759 1.0920 0.0248 0.0455 0.103 0.218 0.429 0.814

22.4 0.0244 0.0437 0.0985 0.207 0.413 0.790

D - 6

Technical

Com

mon


Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085

20 0.0151 0.0277 0.0559 0.116 0.236 0.48222.4 0.0149 0.0268 0.0542 0.111 0.229 0.47125 0.0135 0.0161 0.0243 0.0294 0.0459 0.0594 0.0946 0. 1238 0.206 0.250 0.425 0.50528 0.0133 0.0158 0.0238 0.0282 0.0449 0.0567 0.0919 0.1167 0.201 0.240 0.418 0.491

31.5 0.0077 0.0141 0.0173 0.0254 0.0334 0.0479 0.0730 0.0993 0.144 0.215 0.280 0.44035.5 0.0076 0.0140 0.0170 0.0247 0.0327 0.0464 0.0712 0.0952 0.141 0.208 0.276 0.43140 0.0071 0.0081 0.0161 0.0180 0.0295 0.0347 0.0645 0.0764 0.131 0.149 0.257 0.28945 0.0070 0.0080 0.0159 0.0176 0.0292 0.0337 0.0635 0.0735 0.129 0.145 0.255 0.28350 0.0047 0.0073 0.0093 0.0165 0.0222 0.0303 0.0480 0.0665 0.0957 0.135 0.193 0.26456 0.0046 0.0073 0.0092 0.0162 0.0220 0.0297 0.0473 0.0648 0.0945 0.132 0.192 0.26063 0.0044 0.0048 0.0088 0.0096 0.0169 0.0227 0.0357 0.0492 0.0690 0.0979 0.140 0.19771 0.0044 0.0048 0.0087 0.0094 0.0167 0.0223 0.0353 0.0481 0.0682 0.0963 0.139 0.19580 0.0045 0.0090 0.0172 0.0364 0.0704 0.14290 0.0045 0.0089 0.0169 0.0358 0.0694 0.141

100


Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085

637180 0.0118 0.0113 0.0221 0.0452 0.091490 0.0117 0.0112 0.0219 0.0447 0.0907

100 0.0086 0.0119 0.0107 0.0115 0.0209 0.0226 0.0432 0.0461 0.0877 0.0930112 0.0086 0.0118 0.0106 0.0113 0.0207 0.0222 0.0429 0.0455 0.0872 0.0920125 0.0081 0.0087 0.0097 0.0108 0.0189 0.0212 0.0369 0.0438 0.0753 0.0887140 0.0081 0.0086 0.0097 0.0107 0.0188 0.0209 0.0367 0.0434 0.0751 0.0881160 0.0082 0.0048 0.0098 0.0097 0.0190 0.0192 0.0372 0.0397 0.0759180 0.0081 0.0048 0.0097 0.0096 0.0189 0.0191 0.0370 0.0396 0.0756200 0.0047 0.0049 0.0094 0.0098 0.0187 0.0195 0.0388 0.0401224 0.0047 0.0048 0.0093 0.0097 0.0186 0.0193 0.0387 0.0399250 0.0044 0.0047 0.0089 0.0094 0.0171 0.0189 0.0357 0.0391280 0.0044 0.0047 0.0088 0.0094 0.0170 0.0188 0.0357 0.0389315 0.0044 0.0045 0.0088 0.0089 0.0168 0.0172 0.0354 0.0359355 0.0043 0.0044 0.0086 0.0089 0.0167 0.0171 0.0347 0.0358400 0.0044 0.0088 0.0169 0.0354450 0.0043 0.0087 0.0167 0.0347500

GD2: Right Angle Shaft Double Reduction

GD2: Right Angle Shaft Triple Reduction

GD2: Right Angle Shaft Quadruple Reduction

TECHNICAL DATA GD2 Right Angle Shaft

D - 7

GD2 (kgf m2)


6.37.18

4.72 8.94 16.6 94.63 8.78 15.9 103.48 6.70 12.4 11.23.43 6.61 12.0 12.52.55 4.88 9.14 142.52 4.82 8.85 161.86 3.57 6.71 181.84 3.54 6.53 20

22.4


0.960 1.84 3.56 200.949 0.994 1.81 1.91 3.47 3.70 22.40.848 0.981 1.60 1.88 3.10 3.59 3.84 250.842 0.870 1.59 1.65 3.04 3.19 8.71 8.84 17.9 18.1 280.563 0.862 1.06 1.63 1.81 3.12 2.80 8.48 8.59 17.0 17.1 31.50.559 0.578 1.05 1.08 1.78 1.87 2.92 5.16 5.24 9.58 13.2 13.4 35.50.518 0.572 0.964 1.07 1.64 1.83 2.46 5.01 5.08 9.34 12.6 12.7 400.515 0.527 0.958 0.982 1.61 1.67 2.24 3.76 3.81 7.10 9.65 9.73 450.372 0.523 0.699 0.975 1.24 1.64 1.77 3.67 3.71 6.95 9.27 9.33 500.371 0.378 0.695 0.710 1.23 1.27 1.63 2.73 2.76 5.13 7.04 7.09 560.266 0.760 0.507 0.706 0.900 1.25 1.29 2.67 2.70 5.03 6.79 6.83 630.265 0.269 0.505 0.514 0.890 0.915 1.20 2.04 2.06 3.73 710.257 0.268 0.485 0.512 0.845 0.903 0.928 2.00 2.02 3.67 80

0.259 0.491 0.854 0.872 90100


633.91 3.95 713.28 3.30 80

0.187 0.385 0.431 0.941 0.954 2.01 2.85 2.87 900.181 0.189 0.372 0.389 0.409 0.439 0.554 0.920 0.930 1.97 2.75 2.77 1000.180 0.182 0.371 0.375 0.405 0.415 0.490 0.797 0.805 1.72 2.02 2.03 1120.163 0.182 0.338 0.374 0.363 0.410 0.420 0.784 0.790 1.69 1.96 1.97 1250.163 0.164 0.338 0.340 0.361 0.367 0.398 0.609 0.614 1.12 1.79 1.80 140

0.0970 0.164 0.197 0.339 0.211 0.364 0.371 0.600 0.605 1.11 1.75 1.76 1600.0969 0.0976 0.197 0.198 0.209 0.213 0.356 0.548 0.552 1.01 1.30 1.31 1800.0731 0.0974 0.148 0.198 0.157 0.211 0.277 0.542 0.545 0.998 1.28 1.28 2000.0730 0.0734 0.148 0.149 0.156 0.159 0.217 0.391 0.393 0.571 0.936 0.940 2240.0687 0.0733 0.140 0.148 0.146 0.157 0.206 0.388 0.389 0.565 0.920 0.923 2500.0687 0.0689 0.139 0.140 0.145 0.147 0.200 0.277 0.279 0.525 0.867 0.868 2800.0682 0.0689 0.138 0.140 0.142 0.146 0.191 0.275 0.276 0.521 3150.0653 0.0683 0.133 0.138 0.137 0.143 0.144 0.266 0.267 0.498 355

0.0654 0.134 0.137 0.138 400450500

Unit: kgf m2

Unit: kgf m2

Unit: kgf m2

TECHNICAL DATA GD2 Right Angle Shaft

D - 8

Technical

Com

mon


Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085

6.3 0.00238 0.00508 0.0110 0.0211 0.0416 0.109 0.226 0.4477.1 0.00215 0.00455 0.0105 0.0188 0.0376 0.0977 0.207 0.4208 0.00185 0.00433 0.00913 0.0135 0.0158 0.0257 0.0336 0.0496 0.0787 0.128 0.167 0.262 0.326 0.5029 0.00170 0.00398 0.00880 0.0129 0.0144 0.0226 0.0309 0.0434 0.0721 0.111 0.155 0.236 0.309 0.466

10 0.00133 0.00305 0.00718 0.0107 0.0136 0.0186 0.0267 0.0389 0.0619 0.0909 0.132 0.188 0.256 0.36011.2 0.00125 0.00283 0.00698 0.0103 0.0126 0.0167 0.0251 0.0348 0.0576 0.0803 0.124 0.173 0.245 0.33712.5 0.00100 0.00218 0.00463 0.00820 0.00933 0.0154 0.0210 0.0300 0.0443 0.0699 0.0898 0.147 0.165 0.27914 0.00095 0.00205 0.00450 0.00795 0.00878 0.0142 0.0200 0.0275 0.0415 0.0629 0.0851 0.136 0.158 0.26416 0.00078 0.00173 0.00365 0.00523 0.00725 0.0104 0.0149 0.0232 0.0312 0.0493 0.0708 0.0984 0.129 0.17918 0.00073 0.00163 0.00355 0.00508 0.00690 0.00965 0.0142 0.0215 0.0296 0.0449 0.0678 0.0922 0.124 0.16920 0.00403 0.00795 0.0161 0.0342 0.0764 0.138

22.4 0.00393 0.00748 0.0151 0.0316 0.0724 0.132


Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085

20 0.00085 0.00210 0.00288 0.00558 0.0135 0.0303 0.0588 0.12122.4 0.00083 0.00205 0.00280 0.00538 0.0131 0.0291 0.0570 0.11825 0.00073 0.00190 0.00248 0.00310 0.00478 0.00600 0.0109 0.0144 0.0249 0.0324 0.0514 0.0622 0.106 0.12728 0.00073 0.00188 0.00245 0.00305 0.00463 0.00573 0.0107 0.0137 0.0242 0.0306 0.0502 0.0598 0.104 0.123

31.5 0.00048 0.00115 0.00153 0.00263 0.00335 0.00505 0.00763 0.0115 0.0164 0.0261 0.0317 0.0536 0.0690 0.11035.5 0.00048 0.00115 0.00153 0.00260 0.00328 0.00485 0.00743 0.0111 0.0159 0.0251 0.0309 0.0520 0.0679 0.10840 0.00043 0.00108 0.00138 0.00163 0.00303 0.00353 0.00658 0.00798 0.0142 0.0172 0.0287 0.0331 0.0632 0.071445 0.00043 0.00108 0.00138 0.00160 0.00298 0.00343 0.00648 0.00770 0.0140 0.0165 0.0282 0.0321 0.0624 0.069950 0.00090 0.00145 0.00190 0.00315 0.00433 0.00680 0.00868 0.0147 0.0175 0.0296 0.0347 0.064856 0.00088 0.00143 0.00188 0.00308 0.00425 0.00663 0.00850 0.0143 0.0172 0.0289 0.0343 0.063763 0.00083 0.00093 0.00178 0.00198 0.00393 0.00448 0.00788 0.00900 0.0164 0.0180 0.0325 0.035671 0.00083 0.00093 0.00175 0.00193 0.00390 0.00435 0.00778 0.00873 0.0162 0.0177 0.0323 0.035080 0.00085 0.00183 0.00400 0.00805 0.0167 0.033190 0.00085 0.00180 0.00395 0.00790 0.0165 0.0328


Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085

637180 0.00078 0.00200 0.00278 0.00618 0.0124 0.024890 0.00078 0.00200 0.00275 0.00610 0.0123 0.0246

100 0.00075 0.00080 0.00195 0.00203 0.00263 0.00283 0.00585 0.00630 0.0119 0.0126 0.0238 0.0252112 0.00075 0.00078 0.00195 0.00200 0.00260 0.00278 0.00580 0.00620 0.0118 0.0125 0.0237 0.0249125 0.00068 0.00075 0.00183 0.00198 0.00238 0.00265 0.00533 0.00593 0.0103 0.0121 0.0207 0.0241140 0.00068 0.00075 0.00183 0.00195 0.00238 0.00263 0.00530 0.00585 0.0103 0.0120 0.0207 0.0239160 0.00043 0.00068 0.00110 0.00185 0.00103 0.00240 0.00220 0.00538 0.00493 0.0104 0.00883 0.0209180 0.00043 0.00068 0.00110 0.00183 0.00103 0.00238 0.00218 0.00533 0.00490 0.0104 0.00878 0.0208200 0.00040 0.00043 0.00105 0.00110 0.00098 0.00105 0.00213 0.00223 0.00480 0.00498 0.00860 0.00893224 0.00040 0.00043 0.00105 0.00110 0.00098 0.00103 0.00210 0.00220 0.00478 0.00495 0.00858 0.00888250 0.00040 0.00105 0.00093 0.00100 0.00200 0.00213 0.00440 0.00483 0.00783 0.00865280 0.00040 0.00105 0.00093 0.00100 0.00198 0.00213 0.00438 0.00480 0.00780 0.00863315 0.00093 0.00093 0.00198 0.00200 0.00433 0.00440 0.00773 0.00785355 0.00088 0.00093 0.00193 0.00200 0.00430 0.00440 0.00755 0.00783400 0.00080 0.00093 0.00163 0.00198 0.00353 0.00435 0.00685 0.00775450 0.00090 0.00193 0.00430 0.00758500 0.00080 0.00165 0.00353 0.00685

Parallel Shaft Double Reduction

Parallel Shaft Triple Reduction

Parallel Shaft Quadruple Reduction

TECHNICAL DATA Moment of Inertia Parallel shaft

D - 9


0.865 1.78 3.33 6.30.840 0.950 1.72 1.95 3.10 3.70 7.10.693 0.918 1.32 1.89 2.48 3.40 80.675 0.748 1.28 1.42 2.34 2.70 90.490 0.725 1.02 1.39 1.91 2.53 100.480 0.523 0.990 1.09 1.81 2.05 11.20.323 0.510 0.658 1.06 1.29 1.94 12.50.318 0.345 0.640 0.700 1.23 1.38 140.253 0.338 0.510 0.683 1.01 1.31 160.250 0.268 0.500 0.538 0.968 1.06 18

0.263 0.528 1.02 2022.4


0.239 0.508 0.720 200.237 0.248 0.500 0.523 0.698 0.755 4.58 4.66 22.40.212 0.245 0.450 0.518 0.610 0.728 0.787 4.19 4.25 250.210 0.217 0.445 0.460 0.595 0.633 1.20 1.23 2.34 3.36 3.41 280.139 0.215 0.300 0.458 0.398 0.615 0.654 1.15 1.17 2.24 3.13 3.16 31.50.138 0.143 0.298 0.308 0.388 0.413 0.567 0.941 0.962 1.72 2.32 2.35 35.50.128 0.142 0.275 0.305 0.350 0.400 0.426 0.906 0.923 1.65 2.16 2.18 400.127 0.130 0.275 0.280 0.345 0.360 0.418 0.630 0.643 1.14 1.73 1.75 45

0.0695 0.129 0.138 0.278 0.178 0.353 0.370 0.609 0.619 1.10 1.63 1.65 500.0693 0.0710 0.137 0.141 0.174 0.184 0.333 0.486 0.494 0.810 1.34 1.36 560.0653 0.0705 0.128 0.140 0.159 0.179 0.216 0.473 0.479 0.786 1.28 1.29 630.0650 0.0660 0.127 0.130 0.157 0.163 0.194 0.367 0.372 0.626 1.02 1.03 710.0630 0.0658 0.122 0.129 0.145 0.160 0.166 0.358 0.362 0.610 80

0.0638 0.124 0.147 0.152 0.309 0.312 0.491 90


6371

0.713 0.719 800.0675 0.108 0.123 0.611 0.616 900.0658 0.0680 0.105 0.109 0.118 0.125 0.147 0.250 0.253 0.517 0.588 0.592 1000.0658 0.0663 0.105 0.106 0.117 0.119 0.138 0.221 0.223 0.447 0.525 0.528 1120.0613 0.0660 0.0963 0.105 0.106 0.118 0.121 0.218 0.219 0.441 0.469 0.471 1250.0613 0.0615 0.0963 0.0968 0.106 0.107 0.115 0.199 0.200 0.291 0.368 0.371 1400.0193 0.0615 0.0398 0.0965 0.0678 0.107 0.108 0.189 0.190 0.287 0.331 0.332 1600.0193 0.0194 0.0395 0.0400 0.0673 0.0683 0.105 0.164 0.165 0.261 0.260 0.261 1800.0189 0.0194 0.0388 0.0398 0.0425 0.0678 0.0688 0.158 0.159 0.258 0.237 0.238 2000.0189 0.0190 0.0388 0.0390 0.0423 0.0428 0.0665 0.113 0.114 0.158 0.232 0.233 2240.0178 0.0189 0.0368 0.0390 0.0398 0.0425 0.0431 0.110 0.110 0.156 0.171 0.172 2500.0178 0.0179 0.0368 0.0370 0.0395 0.0400 0.0621 0.0830 0.0833 0.146 0.168 0.169 2800.0177 0.0179 0.0365 0.0368 0.0388 0.0398 0.0597 0.0805 0.0808 0.145 0.141 0.141 3150.0170 0.0177 0.0353 0.0365 0.0375 0.0390 0.0392 0.0801 0.0803 0.112 3550.0156 0.0170 0.0295 0.0355 0.0313 0.0375 0.0378 0.0626 0.0628 0.111 400

0.0156 0.0295 0.0313 0.0315 450500

Unit: kg m2

Unit: kg m2

Unit: kg m2

TECHNICAL DATA Moment of Inertia Parallel shaft

D - 10

Technical

Com

mon


Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085

6.3 0.0095 0.0203 0.0440 0.0845 0.166 0.434 0.906 1.797.1 0.0086 0.0182 0.0419 0.0753 0.150 0.391 0.830 1.688 0.0074 0.0173 0.0365 0.0541 0.0633 0.1027 0.134 0.199 0.315 0.513 0.666 1.05 1.30 2.019 0.0068 0.0159 0.0352 0.0515 0.0577 0.0903 0.124 0.174 0.288 0.444 0.620 0.946 1.24 1.86

10 0.0053 0.0122 0.0287 0.0426 0.0542 0.0743 0.107 0.156 0.248 0.364 0.529 0.751 1.02 1.4411.2 0.0050 0.0113 0.0279 0.0410 0.0505 0.0668 0.100 0.139 0.230 0.321 0.497 0.690 0.978 1.3512.5 0.0040 0.0087 0.0185 0.0328 0.0373 0.0616 0.0841 0.120 0.177 0.280 0.359 0.587 0.658 1.1214 0.0038 0.0082 0.0180 0.0318 0.0351 0.0566 0.0798 0.110 0.166 0.252 0.340 0.545 0.631 1.0616 0.0031 0.0069 0.0146 0.0209 0.0290 0.0415 0.0594 0.0926 0.125 0.197 0.283 0.394 0.514 0.71418 0.0029 0.0065 0.0142 0.0203 0.0276 0.0386 0.0569 0.0860 0.119 0.180 0.271 0.369 0.496 0.67820 0.0161 0.0318 0.0643 0.137 0.305 0.552

22.4 0.0157 0.0299 0.0605 0.126 0.290 0.527


Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085

20 0.0034 0.0084 0.0115 0.0223 0.0539 0.121 0.235 0.48322.4 0.0033 0.0082 0.0112 0.0215 0.0522 0.117 0.228 0.47225 0.0029 0.0076 0.0099 0.0124 0.0191 0.0240 0.0437 0.0574 0.0996 0.130 0.206 0.249 0.425 0.50728 0.0029 0.0075 0.0098 0.0122 0.0185 0.0229 0.0427 0.0547 0.0969 0.122 0.201 0.239 0.418 0.492

31.5 0.0019 0.0046 0.0061 0.0105 0.0134 0.0202 0.0305 0.0458 0.0655 0.105 0.127 0.214 0.276 0.44135.5 0.0019 0.0046 0.0061 0.0104 0.0131 0.0194 0.0297 0.0442 0.0637 0.100 0.124 0.208 0.272 0.43140 0.0017 0.0043 0.0055 0.0065 0.0121 0.0141 0.0263 0.0319 0.0568 0.0689 0.115 0.132 0.253 0.28545 0.0017 0.0043 0.0055 0.0064 0.0119 0.0137 0.0259 0.0308 0.0558 0.0659 0.113 0.128 0.250 0.27950 0.0036 0.0058 0.0076 0.0126 0.0173 0.0272 0.0347 0.0588 0.0700 0.118 0.139 0.25956 0.0035 0.0057 0.0075 0.0123 0.0170 0.0265 0.0340 0.0571 0.0689 0.116 0.137 0.25563 0.0033 0.0037 0.0071 0.0079 0.0157 0.0179 0.0315 0.0360 0.0647 0.0721 0.130 0.14271 0.0033 0.0037 0.0070 0.0077 0.0156 0.0174 0.0311 0.0349 0.0706 0.129 0.14080 0.0034 0.0073 0.0160 0.0322 0.0668 0.13390 0.0034 0.0072 0.0158 0.0316 0.0659 0.131


Size of Reducer9015 9025 9030 9035 9040 9045 9050 9055 9060 9065 9070 9075 9080 9085

637180 0.0031 0.0080 0.0111 0.0247 0.0496 0.099090 0.0031 0.0080 0.0110 0.0244 0.0491 0.0983

100 0.0030 0.0032 0.0078 0.0081 0.0105 0.0113 0.0234 0.0252 0.0476 0.0505 0.0953 0.101112 0.0030 0.0031 0.0078 0.0080 0.0104 0.0111 0.0232 0.0248 0.0473 0.0499 0.0948 0.0996125 0.0027 0.0030 0.0073 0.0079 0.0095 0.0106 0.0213 0.0237 0.0413 0.0482 0.0829 0.0963140 0.0027 0.0030 0.0073 0.0078 0.0095 0.0105 0.0212 0.0234 0.0411 0.0478 0.0827 0.0957160 0.0017 0.0027 0.0044 0.0074 0.0041 0.0096 0.0088 0.0215 0.0197 0.0416 0.0353 0.0835180 0.0017 0.0027 0.0044 0.0073 0.0041 0.0095 0.0087 0.0213 0.0196 0.0414 0.0351 0.0832200 0.0016 0.0017 0.0042 0.0044 0.0039 0.0042 0.0085 0.0089 0.0192 0.0199 0.0344 0.0357224 0.0016 0.0017 0.0042 0.0044 0.0039 0.0041 0.0084 0.0088 0.0191 0.0198 0.0343 0.0355250 0.0016 0.0042 0.0037 0.0040 0.0080 0.0085 0.0176 0.0193 0.0313 0.0346280 0.0016 0.0042 0.0037 0.0040 0.0079 0.0085 0.0175 0.0192 0.0312 0.0345315 0.0037 0.0037 0.0079 0.0080 0.0173 0.0176 0.0309 0.0314355 0.0035 0.0037 0.0077 0.0080 0.0172 0.0176 0.0302 0.0313400 0.0032 0.0037 0.0065 0.0079 0.0141 0.0174 0.0274 0.0310450 0.0036 0.0077 0.0172 0.0303500 0.0032 0.0066 0.0141 0.0274

Parallel Shaft Double Reduction

Parallel Shaft Quadruple Reduction

Parallel Shaft Triple Reduction

TECHNICAL DATA GD2 Parallel shaft

D - 11


3.46 7.10 13.3 6.33.36 3.80 6.86 7.79 12.4 14.8 7.12.77 3.67 5.28 7.54 9.91 13.6 82.70 2.99 5.12 5.69 9.37 10.8 91.96 2.90 4.06 5.54 7.62 10.1 101.92 2.09 3.96 4.34 7.25 8.21 11.21.29 2.04 2.63 4.24 5.16 7.74 12.51.27 1.38 2.56 2.80 4.93 5.52 141.01 1.35 2.04 2.73 4.02 5.23 16

0.998 1.07 2.00 2.15 3.87 4.25 181.05 2.11 4.06 20

22.4


0.957 2.03 2.88 200.946 0.991 2.00 2.09 2.79 3.02 18.3 18.7 22.40.846 0.978 1.80 2.07 2.44 2.91 3.15 16.7 17.0 250.839 0.868 1.78 1.84 2.38 2.53 4.80 4.92 9.35 13.4 13.6 280.557 0.859 1.20 1.83 1.59 2.46 2.62 4.58 4.69 8.96 12.5 12.7 31.50.553 0.571 1.19 1.23 1.55 1.65 2.27 3.77 3.85 6.86 9.26 9.40 35.50.510 0.566 1.10 1.22 1.40 1.60 1.70 3.62 3.69 6.62 8.63 8.73 400.508 0.520 1.10 1.12 1.38 1.44 1.67 2.52 2.57 4.57 6.93 7.01 450.278 0.516 0.551 1.11 0.711 1.41 1.48 2.43 2.48 4.41 6.54 6.60 500.277 0.284 0.547 0.562 0.696 0.735 1.33 1.95 1.98 3.24 5.37 5.42 560.261 0.282 0.512 0.558 0.636 0.716 0.863 1.89 1.92 3.14 5.11 5.15 630.260 0.264 0.509 0.519 0.626 0.651 0.776 1.47 1.49 2.51 4.08 4.11 710.252 0.263 0.489 0.517 0.578 0.639 0.666 1.43 1.45 2.44 80

0.255 0.495 0.587 0.607 1.24 1.25 1.96 90


6371

2.85 2.88 800.270 0.432 0.493 2.45 2.47 900.263 0.272 0.419 0.436 0.471 0.501 0.589 1.00 1.01 2.07 2.35 2.37 1000.263 0.265 0.418 0.422 0.467 0.477 0.552 0.884 0.892 1.79 2.10 2.11 1120.245 0.264 0.385 0.421 0.425 0.472 0.482 0.871 0.878 1.77 1.88 1.88 1250.245 0.246 0.385 0.387 0.423 0.429 0.460 0.795 0.800 1.16 1.47 1.48 140

0.0771 0.246 0.159 0.386 0.271 0.426 0.433 0.758 0.762 1.15 1.32 1.33 1600.0770 0.0777 0.158 0.160 0.269 0.273 0.418 0.657 0.661 1.04 1.04 1.04 1800.0755 0.0775 0.155 0.159 0.170 0.271 0.275 0.632 0.634 1.03 0.948 0.952 2000.0754 0.0758 0.155 0.156 0.169 0.171 0.266 0.454 0.455 0.631 0.930 0.933 2240.0713 0.0757 0.147 0.156 0.159 0.170 0.173 0.438 0.440 0.625 0.685 0.688 2500.0712 0.0715 0.147 0.148 0.158 0.160 0.249 0.332 0.333 0.583 0.673 0.675 2800.0707 0.0714 0.146 0.147 0.155 0.159 0.239 0.322 0.323 0.579 0.562 0.564 3150.0680 0.0709 0.141 0.146 0.150 0.156 0.157 0.320 0.321 0.448 3550.0622 0.0681 0.118 0.142 0.125 0.150 0.151 0.251 0.251 0.445 400

0.0623 0.118 0.125 0.126 450500

Unit: kgf m2

Unit: kgf m2

Unit: kgf m2

TECHNICAL DATA GD2 Parallel shaft

Size FS FA FB FC AS BS C CA HP DS GS1 GS2 JS1 JS2 K1 K2 K3 K49015 118 110 325 175 140 260 15 25 38 115 23 23 60 58 50 75 85 509025 130 125 385 190 155 310 19 30 41 135 24 24 70 65 55 90 110 559030 143 147 445 200 175 365 24 40 43 135 24 24 75 81 60 105 80 609035 143 166 495 200 194 396 24 40 43 160 24 24 90 106 60 105 80 609040 165 168 510 240 205 420 28 48 55 170 28 28 95 107 75 125 100 759045 165 189 570 240 226 459 28 48 55 190 28 28 115 127 75 125 100 759050 185 188 590 250 225 490 28 55 50 180 29 29 95 103 75 135 100 759055 185 219 660 250 256 529 28 55 50 215 29 29 120 138 75 135 100 75

Size L1 L2 P1 Q T1 S1 S2 RI RJ RK F C1 C2 C3 ES9015 38 47 50 25 35 53 23 80 65 175 115 79 55 1109025 45 50 50 26 40 58 26 87.5 75 200 135 92 60 1309030 54 53 53 27 50 65 24 105 80 70 214 155 109 59 1409035 54 60 53 27 50 65 24 120 80 70 214 186 109 59 1409040 66 67 67 30 60 70 28 120 90 72.5 250 180 126 72.5 1459045 66 87 67 30 60 70 28 140 90 72.5 250 219 126 72.5 1459050 68 67 67 31 60 78 32 140 105 280 210 148 59 1509055 68 80 67 31 60 78 32 155 105 280 249 148 59 150

P1P1

T1

L1

GS1

L2

HP

L1

L2CA

T1 T1

L1 GS1

GS2 T1

L1

F

BSAS

DSS1

K1 K3 K4

RI

JS2

S2

DSJS

1

C

K2

RJ

RK

ES

C1 C2 C3

Q

FC

FAFB

FS

9015 9055 / Right Angle Double, Triple / Parallel double / Horizontal, Vertical, Upright

D - 12

Technical

Com

mon

TECHNICAL DATA Supplementary Dimension Drawing

Size FS FA FB FC AS BS C CA HP DS GS1 GS2 JS1 JS2 K1 K2 K3 K49015 118 110 325 175 140 305 15 25 38 115 23 23 60 58 50 75 65 509025 130 125 385 190 155 375 19 23 41 135 24 24 70 65 55 90 85 559030 143 147 445 200 175 415 24 44 43 135 24 24 75 72 60 105 80 609035 143 166 495 200 194 446 24 44 43 160 24 24 90 97 60 105 80 609040 165 168 510 240 205 494 28 56 55 170 28 28 95 100 75 125 100 759045 165 189 570 240 205 533 28 56 55 190 28 28 115 120 75 125 100 759050 185 188 590 250 225 563 28 56 50 180 29 29 95 103 75 135 100 759055 185 219 660 250 256 602 28 56 50 215 29 29 120 138 75 135 100 75

Size L1 L2 P1 Q T1 S1 S2 RI RJ F C1 C2 C3 C4 ES2 ES29015 38 47 50 25 35 53 19 80 70 20 1109025 45 50 50 26 40 58 23 87.5 82.5 281 1309030 54 53 53 27 50 65 23 105 80 155 63 85 80 120 1709035 54 60 53 27 50 65 23 120 80 186 63 85 80 120 1709040 66 67 67 30 60 70 24 120 90 214 180 74 99 90 140 2009045 66 87 67 30 60 70 24 140 90 170 219 74 99 90 140 2009050 68 67 67 31 60 78 24 140 105 214 210 89 118 96 150 2029055 68 80 67 31 60 78 24 155 105 214 249 89 118 96 150 202

FB

FS Q

FA

FC

P1 P1

T1T1

HP

L2CA

L2

L1GS1 GS

1GS

2 T1

L1L1

T1

GS2

GS1

T1

L1 L1

T1

F

C

AS

ES1

K3

BS

DSS2

JS1

S1K1

RI

K4ES

2K2

C4C3C2C1

DSJS

2RJ

C2C1(9015,9025)(9030~9055)

D - 13

9015 9035 Right Side)

9040 9055 Right Side)

9015 9055 / Right Angle Quadruple / Parallel Triple, Quadruple / Horizontal, Vertical, Upright


Q

FA FB

FC

FS

P1P1

T1

GS1

T1

GS2

F

L1 L1HP

T1

L1GS1

T1

L2L2

CA

C

S2DS DS

JS1

JS2

S1K1 K2 K3 K4

AS BS

RI

C3C2C1

ES

RJ

D - 14

Technical

Com

mon

Size FS FA FB FC AS BS C CA HP DS GS1 GS2 JS1 JS2 K1 K2 K3 K49060 210 175 300 210 251 564 35 75 47 230 31 45 105 120 90 160 160 909065 210 221 300 210 290 610 35 75 47 265 31 45 140 155 90 160 160 909070 235 185 370 270 283 657 42 85 47 260 33 45 125 135 105 190 190 1059075 235 238 370 270 330 710 42 85 47 295 33 45 148 158 105 190 190 1059080 255 275 370 270 325 750 42 100 47 295 34 45 138 148 105 190 190 1059085 265 331 370 270 369 806 42 100 47 335 34 45 168 188 105 190 190 105

Size L1 L2 P1 Q T1 S1 S2 RI RJ F C1 C2 C3 ES9060 79 100 80 40 35 72 65 160 115 330 245 100 138 1709065 79 135 80 40 35 72 65 175 115 330 291 100 138 1709070 94 110 95 40 40 72 75 175 138 380 285 94.5 203 2009075 94 145 95 40 52 72 75 190 138 380 338 94.5 203 2009080 96 120 95 45 52 82 85 190 160 420 330 132 188 2209085 96 160 95 45 52 82 85 215 160 420 386 132 188 220

9060 9085 / Right Angle Double, Triple / Parallel Double / Horizontal, Vertical, Upright


Q

FA FB

FS

FC

P1 P1

GS1L1

F

GS2T1 T1

L1

T1 T1

GS1

L1HP

CAL2

L2

C

S1K2K1

S2

RI

K3 K4

JS1

DS DSJS

2

BSAS

C4C3C2C1

RJ

ES2

ES1

D - 15

Size FS FA FB FC AS BS C CA HP DS GS1 GS2 JS1 JS2 K1 K2 K3 K49060 210 175 300 210 251 649 35 75 47 230 31 45 105 145 90 160 140 909065 210 221 300 210 290 695 35 75 47 265 31 45 140 180 90 160 140 909070 235 185 370 270 283 752 42 85 47 260 33 45 125 165 105 190 165 1059075 235 238 370 270 330 805 42 85 47 295 33 45 148 188 105 190 165 1059080 255 275 370 270 325 870 42 100 47 295 34 45 138 173 105 190 190 1059085 265 331 370 270 369 926 42 100 47 335 34 45 168 213 105 190 190 105

Size L1 L2 P1 Q T1 S1 S2 RI RJ F C1 C2 C3 ES9060 79 100 80 40 35 72 65 160 115 250 245 100 138 1709065 79 135 80 40 35 72 65 175 115 250 291 100 138 1709070 94 110 95 40 40 72 75 175 138 280 285 94.5 203 2009075 94 145 95 40 52 72 75 190 138 280 338 94.5 203 2009080 96 120 95 45 52 82 85 190 160 330 330 132 188 2209085 96 160 95 45 52 82 85 215 160 330 386 132 188 220

9060 9085 / Right Angle Quadruple / Parallel Triple, Quadruple / Horizontal, Vertical, Upright


Size FS FA FB FC AS BS C DS GS JS1 JS2 JS3 K1 K2 K3 L1 Q T19090 330 350 370 270 345 975 42 315 45 155 152 260 230 240 170 96 45 509095 330 380 370 270 375 1005 42 340 45 180 177 285 245 225 170 106 45 509100 375 435 370 270 375 1095 48 355 46 185 170 305 265 290 190 110 45 559105 375 470 370 270 410 1130 48 380 46 210 195 330 270 260 190 120 45 559110 407 525 370 270 420 1240 56 400 48 230 202 350 285 325 310 119 45 609115 407 575 370 270 470 1290 56 425 48 255 227 375 315 305 310 129 45 60

Size FS HP K4 K5 L2 RI RJ RK S1 S2 S3 S4 C1 C2 C3 C4 WB1 WB29090 330 42 170 190 130 215 173 133 90 130 90 90 378 262 82 225 290 4309095 330 42 185 215 140 235 173 133 80 140 90 90 408 262 82 225 290 4309100 375 43 190 220 150 235 200 145 85 145 90 100 425 299 91 260 370 5009105 375 43 215 240 160 260 200 145 80 155 90 100 459 299 91 260 370 5009110 407 44 210 240 170 265 213 160 90 150 105 100 483 341 90 261 370 5009115 407 44 235 270 180 280 213 160 85 150 105 100 532 341 90 261 370 500

T1 T1

L1L1 GS

AS BS

K3K2K1

JS1

DSJS

3

JS2

DSC

FA FB

QFS

FC

FS

K4HPK5 L2 L2

S3

S1

S2S4

WB2 RIWB1

C1C2C3C4

RJ

RK

D - 16

Technical

Com

mon

9090 9115 / Parallel Double, Triple, Quadruple / Horizontal / Right Angle Double, Triple, Quadruple / Horizontal

9090 9115 Parallel Double, Triple, Quadruple / Vertical Right Angle Double, Triple, Quadruple/Vertical


Size A L M(nut)

PRmax TR

S (bellevile spring)DIN2093(nom.) Qty

9015 13.1 140 M12 35 22 A50 2X29025 16.1 170 M16 40 25 A50 2X39030 18.9 200 M20 50 28 A63 2X39035 18.9 200 M20 50 28 A63 2X39040 21.7 240 M24 60 30 A80 2X29045 21.7 240 M24 60 30 A80 2X29050 21.7 240 M24 60 32 A80 2X29055 21.7 240 M24 60 32 A80 2X29060 32.2 310 M30 85 35 A100 2X39065 32.2 310 M30 85 35 A100 2X39070 38.2 370 M36 95 40 A100 2X49075 38.2 370 M36 95 52 A100 2X49080 38.2 370 M36 95 52 A100 2X49085 38.2 370 M36 95 52 A100 2X49090 38.6 370 M36 95 50 A125 2X39095 38.6 370 M36 95 50 A125 2X39100 47.6 420 M42 100 55 A125 2X49105 47.6 420 M42 100 55 A125 2X49110 48.5 460 M48 110 60 A160 2X39115 48.5 460 M48 110 60 A160 2X3

トルクアーム�

M

S

ボルト�

ATR

APR

L

D - 17

(DRG D1701)

(DRG D1702)

Feature and BenefitsPARAMAX DRIVE units have a number of outstanding features compared to conventional solid shaft speed reducers.1. There is no necessity for a large sized coupling, permitting substantial cost reduction.2. It can be directly mounted onto the driven shaft, eliminating the necessity for foundation working for speed reducer installation and alignment operation.3. Any unit is designed for compactness and ease of operation.

How to Install Unit

Torque Arm Dimensions

a. Torque Arm (Option)The hollow shaft type PARAMAX DRIVE is secured with the torque arm to prevent it from being turned by the counter force.A torque arm is subjected to a compression or tensile load depending upon the direction of rotation of the slow speed shaft, and it must have a sufficient strength against shock loading at the start and during operation.Being prepared as a optional accessory, the torque arm is designed in consideration of such loading conditions. Please order us, if it is necessary.The construction and strength of the torque arm mounting legs must be determined in consideration of impact load.

b. How to Use Torque Arm(1) When the torque arm is used with the speed reducer housing The torque arm must be mounted in an installation hole closer

to the application machine. (For torque arm mounting dimen-sions, refer to the dimension drawing.)

(2) When the torque arm is used with the common base plate The torque arm must be mounted in a position as far from the

low speed shaft as possible.

(DRG D1702)

Use bolt and nut classified as JIS strength class 8.8

TECHNICAL DATA Supplementary Matters to Hollow Shaft

Torque Arm

Bolt

D - 18

Technical

Com

mon

Unit: mm

Unit: mm

Note: 1 Shrink disk (made by RINGSPANN) type No. 2 SHAEFER may be used. 3 For vertical types, thrust washer is necessary to prevent the reducer move when loosening the locking bolt ZS.

Note: 1 The key and keyway conform to JIS B 1301-1996(ISO)"Sunk keys and keyways" parallel keys (regular class) 2 The locking screw and distance ring will not be supplied. Please prepare, if they are necessary. 3 Dimension from center of housing to shaft end is L/2.

(DRG D1802)

(DRG D1801)

Shrink Disk Coupling

Key Coupling 9015~9055 9060~9085

SizeDriven ShaftClamping Bolt Safety Cover

MODEL(note 1) d Ds H ZS TA

N m J LZ LR LV N-ZY DZ LS U dw d1 Dh7

D1min L1 L2 L3 L4 R Z

(Deep)9015 RLK608-80S 80 141 31 M10 70 135 328 4.5 3 4 - M6 70 15 159 60h6 61 63 78 325 240 80 3 2.5 M20 (30)9025 RLK608-90S 90 155 38 M10 70 145 358 4.5 14 4 - M6 80 17 174 70h6 71 73 88 355 270 80 3 2.5 M20 (30)9030 RLK608-100S 100 170 43 M10 70 160 393 3 14 4 - M6 90 20 207 80h6 81 83 98 390 295 90 3 2.5 M20 (30)9035 RLK608-110S 110 185 49 M12 120 160 403 3 14 4 - M6 97 20 237 85h6 86 88 103 390 295 90 3 2.5 M24 (35)9040 RLK608-125 125 215 49 M12 120 180 448 4.5 20 4 - M8 110 17 237 95h6 96 98 113 445 335 110 3 2.5 M24 (35)9045 RLK608-140 140 230 53 M14 190 180 463 3 0 4 - M10 124 17 277 105h6 106 108 123 460 355 110 3 2.5 M24 (35)9050 RLK608-140 140 230 53 M14 190 200 503 4.5 0 4 - M10 124 17 277 105h6 106 108 123 500 380 110 3 2.5 M24 (35)9055 RLK608-165 165 290 63 M16 290 205 528 3 0 4 - M12 146 17 307 120h6 121 123 138 525 385 120 3 2.5 M24 (35)9060 RLK608-165 165 290 63 M16 290 230 583 4.5 0 4 - M12 146 17 319 125h6 126 128 143 580 435 130 3 3 M24 (35)9065 RLK608-175 175 300 63 M16 290 235 594 4.5 4 4 - M12 157.5 21 349 140h6 141 143 158 589 450 130 5 3 M30 (45)9070 RLK608-185 185 320 79 M16 290 260 644 4.5 26 4 - M12 167 21 349 145h6 146 148 163 640 475 160 5 3 M30 (45)9075 RLK608-200 200 340 82 M16 290 265 651 4.5 26 4 - M12 177 21 379 155h6 156 158 173 646 475 160 5 3 M30 (45)9080 RLK608-220 220 370 95 M20 570 285 714 8 26 4 - M12 195 21 399 170g6 171 173 188 709 520 190 5 3 M30 (45)9085 RLK608-240 240 405 100 M20 570 285 714 4.5 27 4 - M12 210 21 429 180g6 181 183 198 709 520 190 5 3 M30 (45)9090 RLK608-240 240 405 100 M20 570 350 844 8 27 6 - M12 215 21 451 190g6 191 193 212 840 635 200 5 4.5 M36 (55)9095 RLK608-260 260 430 110 M20 570 350 859 8 27 6 - M12 230 14 450 200g6 201 203 222 855 640 205 5 4.5 M36 (55)9100 RLK608-260 260 430 110 M20 570 390 934 8 27 6 - M12 235 21 491 210g6 211 213 234 930 705 215 5 4.5 M36 (55)9105 RLK608-280 280 460 123 M20 570 390 949 8 27 6 - M12 250 19 480 220g6 221 223 244 945 715 225 5 4.5 M36 (55)9110 RLK608-300 300 485 131 M24 980 420 1030 8 13 6 - M16 270 15 551 240g6 241 243 263 1025 770 245 5 4.5 M36 (55)9115 RLK608-320 320 520 131 M24 980 420 1065 8 32 6 - M16 285 15 550 250g6 251 253 273 1060 785 245 5 4.5 M36 (55)

Shrink Disk Hollow Shaft

SizeDriven Shaft Locking Screw

Thread Size X Body Length DRG D1802(f)

Locking Distance Ring O.D. X W

DRG D1906,1910(h)Safety Cover

L LG LH LR Z LS U Dj6

D1min

D2j6 L1 L2 L3 L4 L5 X Y P R Z1

(Deep)9015 270 240 258 3 M24 7.5 161 55 70 235 200 70 30 115 16 10 6 2.5 M20(30) M20X50 φ 55X59025 300 265 286 3 M24 10 190 65 80 260 220 80 35 125 18 11 7 2.5 M20(30) M20X50 φ 65X59030 330 290 314 3 M24 9.5 230 75 90 285 240 90 35 145 22 14 9 2.5 M20(30) M20X55 φ 75X59035 330 290 315 3 M24 10 260 85 100 285 240 90 35 145 22 14 9 2.5 M20(30) M20X55 φ 85X59040 360 314 340 3 M30 10 260 90 105 310 260 100 40 180 25 14 9 2.5 M24(35) M24X60 φ 90X49045 370 316 348 3 M30 10 300 105 120 310 260 100 40 180 28 16 10 2.5 M24(35) M24X65 φ 105X69050 410 356 388 3 M30 10 300 105 120 350 300 110 45 220 28 16 10 2.5 M24(35) M24X65 φ 105X69055 410 356 388 3 M30 10 330 115 130 350 300 110 45 220 32 18 11 2.5 M24(35) M24X65 φ 115X69060 470 4.5 M30 47 340 125 140 123 445 395 90 5 260 32 18 11 3 M24(35) M24X80 φ 125X259065 480 4.5 M36 54 350 145 160 143 455 405 100 5 265 36 20 12 3 M30(45) M30X100 φ 145X309070 530 4.5 M36 54 370 145 160 143 500 445 120 5 310 36 20 12 3 M30(45) M30X100 φ 145X309075 530 4.5 M36 54 400 150 165 148 500 445 120 5 365 40 22 13 3 M30(45) M30X100 φ 150X309080 570 4.5 M36 54 400 165 180 163 540 480 125 5 370 40 22 13 3 M30(45) M30X100 φ 165X309085 570 4.5 M36 54 450 175 190 173 540 480 125 5 385 40 22 13 3 M30(45) M30X100 φ 175X30

Hollow Shaft

JLZ

HLS

LV

L3L2

L1 ZS N-ZY

D1 D d1 dw z

L4(45 )

DZ d DS

U

1.6

LR(45 )R

(9015~9085)

1.6

LR(45 )R

(9090~9115)

1.6

1. Hollow Shaft Dimensions

TECHNICAL DATA Hollow Shaft Related Dimensions

Detail A

Y

P

X Js

9/h9

D

LR(45 )R

1.6

LSL

LSL

Z1D

f

L4 L5L3

L2L1

D- 0

.2- 0

.4

U

L / 2

D1

D2 ZAZ1D Z

f

L4 L5L3

L2L1LG

LH

D- 0

.2- 0

.4

U

L / 2

D1

A

(exc

ept 9

015)

φ

D - 19

( f)

( g )

( n )

( J)

( f)

( g )

( h)

( a )

( e ) ( d )( c)( b )

( f)

( g)

( d )

( n )

( J)

( f)

( h )

( g )

( a )

( e ) d( b)( )

(DRG D1906)

(1) Clean and degrease contact surface (a) and (c).(2) Smear surface (c) with "Molykote 321" or its equivalent.

However, keep surface (a) as clean as possible (no grease).(3) Slide O-ring (b) onto the shaft.(Size 9090 to 9115)(4) Mount the reducer on the driven shaft and screw nuts (e) until faces (g)

and (h) make contact.(5) Set the shrink disk (k) at dimensions (LV). Tighten locking bolt (ZS) at

specified torque (TA) (using a torque wrench).

Mounting Procedure (DRG D1901)

(1) Loosen locking bolt (ZS) and remove shrink disk (k).(2) Set thrust washer (f) and hexagon head bolt (n). Remove the reducer from the driven shaft using bolt (m).Note: Parts (d), (e), (f), (ZY), (m) and (n) are optional. Order these as required.

The Hollow shaft bore is provided with retaining ring (d).Ring (d) is the essential component for mounting, securing, and removing the unit.(1) Smear surface of the shaft (e) with "molykote 321" or its equivalent.(2) Turn nut (b) and slide the reducer over the driven shaft. Use plain washer (c), if they are necessary.

(1) After mounting the reducer on the driven shaft, fix bolt (f). (Bolt (f) is not supplied with the unit.)

(2) The bore should be protected by cover (g).

(1) Remove ring (d), mount bolt (n), and reset ring (d). Attach bolt (J) to ring (d), and turn bolt (J) to disconnect the hollow shaft

from the driven shaft. Screw size, refer to the lower table (Z) of the page D-18.

(1) If the driven shaft has no shoulder (DRG D1906) when mounting, provide a distance ring (h) for fixing in place. (Ring (h) is not supplied with the unit).

(DRG D1903)

(DRG D1905)

(DRG D1904)

Note: Parts (a),(b),(c),(n) and (J) are optional. Order these as required.

(DRG D1901)

(DRG D1902)

Removal Procedure (DRG D1902)

Mounting Procedure (DRG D1903)Size 9015 to 9055

Securing (DRG D1904)


Special Cases (DRG D1906)

(DRG D1910)

The Hollow shaft end is provided with thrust washer (d).Thrust washer (d) is the essential component for mounting, securing, and removing the unit.(1) Smear surface of the shaft (e) with "molykote 321" or its equivalent.(2) Turn nut (b) and slide the reducer over the driven shaft.

(1) After mounting the reducer on the driven shaft, fix bolt (f). Bolt (f) is not supplied with the unit.)

(2) The bore should be protected by cover (g)

(1) Remove thrust washer (d), mount bolt (n), and reset thrust washer (d). Attach bolt (J) to thrust washer (d), and turn bolt (J) to disconnect the

hollow shaft from the driven shaft. Screw size, refer to the lower table (Z) of the page D-18.

(1) If the driven shaft has no shoulder (DRG D1906) when mounting, provide a distance ring (h) for fixing in place.(Ring (h) is not supplied with the unit.)

Distance ring dimension, refer to the lower table of the page D-18.

(DRG D1907)

(DRG D1909)

(DRG D1908)

Mounting Procedure (DRG D1907)

Size 9060 to 9085

Securing (DRG D1908)


Special Cased (DRG D1910)

( n) ( f)( m )

( ZY )

( a)

( e )( d )

( c)( b )

( f)ZS

K

LV( ZY )

( g)( h )

2. Shrink Disk Coupling / Mounting & Removal Procedure

3.Key Coupling / Mounting & Removal Procedure

TECHNICAL DATA Hollow Shaft Related Dimensions

D - 20

Technical

Com

mon

FA

FAFA

FA

FF

FD

FC

FHFB

FD

FC

FF

FB FH

Size FA FB FC FD FF FH9015 250 125 50 30 477 1459025 270 140 50 30 515 1609030 300 140 80 52 593 1609035 300 140 80 52 624 1609040 340 160 80 52 653 1809045 340 160 80 52 692 1809050 380 160 80 52 703 1809055 380 160 80 52 742 1809060 440 160 105 65 800 1809065 440 160 105 65 846 1809070 490 200 105 65 900 2209075 490 200 105 65 953 2209080 540 225 105 60 1020 2459085 540 225 105 60 1076 245

Size FA FB FC FD FF FH9095 680 250 135 90 1303 2709105 760 250 175 130 1459 2709115 820 250 175 130 1672 270

9015 9085 Right Angle Double Reduction

9090 9115 Right Angle Double Reduction

TECHNICAL DATA Cooling Fan Dimension

D - 21

Note) Consult us for cooling fan dimension of size 9118 and 9136.

Size FA FB FC FD FF FH9030 300 125 50 30 626 1459035 300 125 50 30 657 1459040 340 125 50 30 686 1459045 340 125 50 30 725 1459050 380 140 50 22 786 1609055 380 140 50 22 825 1609060 440 160 80 52 887 1809065 440 160 80 52 933 1809070 490 160 80 52 975 1809075 490 160 80 52 1028 1809080 540 160 105 65 1111 1809085 540 160 105 65 1167 180

Size FA FB FC FD FF FH9090 680 200 105 65 1255 2209095 680 200 105 65 1285 2209100 760 225 105 60 1414 2459105 760 225 105 60 1448 2459110 820 225 135 90 1594 2459115 820 225 135 90 1643 245

FA

FAFA

FA

FD

FC

FF

FHFB

FD

FC

FF

FB FH

TECHNICAL DATA Cooling Fan Dimension

9015 9085 Right Angle Triple Reduction

9090 9115 Right Angle Triple Reduction

Size FA1 FA2 FA FB FC FD FE FF FG FH9015 129 129 258 125 50 30 130 181 32.5 1459025 143 143 286 140 50 30 150 196 27.5 1609030 169 169 338 140 80 52 155 217 27.5 1609035 169 169 338 140 80 52 180 217 27.5 1609040 188 188 376 160 80 52 195 232 21.5 1809045 188 188 376 160 80 52 215 232 21.5 1809050 208 208 416 160 80 52 205 251 28.5 1809055 208 208 416 160 80 52 240 251 28.5 1809060 240 240 480 200 105 65 260 295 40 2209065 240 240 480 200 105 65 260 295 40 2209070 274 274 548 225 105 65 295 320 44 2459075 274 274 548 225 105 65 330 320 44 2459080 296 296 592 225 135 95 330 339 52 2459085 296 296 592 225 135 95 370 339 52 245

Size FA1 FA2 FA FB FC FD FE FF FG FH9090 465 277 742 250 135 90 345 410 65 2709095 465 277 742 250 135 90 345 410 65 2709100 515 314 829 250 175 130 395 455 65 2709105 515 314 829 250 175 130 395 455 65 2709110 565 356 921 250 175 130 445 485 65 2709115 565 356 921 250 175 130 445 485 65 270

D - 22

Technical

Com

mon

9015 9085 Parallel Double Reduction

When tightening installation bolt, to be removed fan hood.

FF

FD FC

FH

FG

FB

FF

FD FCFG

FHFB

FEFE

FA2 FA1FA

FEFE

FA2 FA1

FA

TECHNICAL DATA Cooling Fan Dimension Horizontal, Uprignt

9090 9115 Parallel Double Reduction

Size FA1 FA2 FA FB FC FD FE FF FG FH9015 111 111 222 125 30 10 105 180 32.5 1459025 129 129 258 125 30 10 125 194 27.5 1459030 140 140 280 125 50 30 125 211 27.5 1459035 150 150 300 140 50 22 150 219 27.5 1609040 170 170 340 140 50 22 165 234 21.5 1609045 170 170 340 140 50 22 185 234 21.5 1609050 172 172 344 140 80 52 170 252 28.5 1609055 172 172 344 140 80 52 205 252 28.5 1609060 199 199 398 160 80 52 220 277 40 1809065 199 199 398 160 80 52 255 277 40 1809070 221 221 442 160 80 52 250 302 44 1809075 221 221 442 160 80 52 285 302 44 1809080 247 247 494 200 105 65 280 340 52 2209085 247 247 494 200 105 65 320 340 52 220

Size FA1 FA2 FA FB FC FD FE FF FG FH9090 268 474 742 200 105 65 345 405 65 2209095 268 474 742 200 105 65 345 405 65 2209100 289 540 829 225 105 65 395 450 65 2459105 289 540 829 225 105 65 395 450 65 2459110 339 582 921 225 135 95 445 480 65 2459115 339 582 921 225 135 95 445 480 65 245

D - 23

Note) Consult us for cooling fan dimension of size 9118 and 9136.

When tightening installation bolt, to be removed fan hood.

FG

FH

FD FCFF

FB

FF

FD FCFG

FBFH

FEFE

FA2 FA1FA

FE

FA1FA2

FA

FE

TECHNICAL DATA Cooling Fan Dimension Horizontal, Uprignt

9015 9085 Parallel Triple Reduction 9090 9115 Parallel Triple Reduction

Size Y1 Y29015 216 1359025 233 1499030 235 173

Size CX GS9015 122 239025 122 249030 119 249035 119 249040 133 289045 133 289050 133 299055 133 29

Size Y1 Y2 FY9015 110 35 1319025 130 25 1449030 135 0 1569035 160 0 1569040 175 30 1749045 195 29 1749050 180 25 1949055 215 0 194

Size Y1 Y29015 110 359025 130 259030 135 09035 160 09040 175 309045 195 *29 or 309050 180 259055 215 0

D - 24

Technical

Com

mon

9015 9055 Right Angle Double, Triple, Quadruple / Parallel Double, Triple, Quadruple

Y2

Y1

Y2

Y2

Y1

FY

Y1

CX

GS

TECHNICAL DATA Option Dimension Horizontal

Air Breather

Drain Valve

[9015~9030 Double reduction right angle and double reduction parallel/Reduction ratio 6.3~7.1]

[9015~9030 Double reduction right angle and double reduction parallel/Reduction ratio 8~259035~9055 Double reduction right angle and double reduction parallel/Reduction ratio 6.3~25]

[9015~9055 Triple and quadruple reduction right angle and triple and quadruple reduction parallel/All reduction ratios]

*29mm ... Triple reduction right angle. 30mm ... Quadruple reduction right

angle. 30mm ... Triple and quadruple

reduction parallel.

Size Y1 Y29015 110 359025 130 259030 135 09035 160 09040 175 309045 195 299050 180 259055 215 0

Size CX HP9015 122 389025 117 419030 109 439035 109 439040 127 559045 127 559050 119 509055 119 50

D - 25

Parallel Triple, QuadrupleRight Angle Quadruple

Parallel DoubleRight Angle Double, Triple

Y2

Y1

CX

HP


TECHNICAL DATA Option Dimension Vertical

Drain Valve

Air Breather

Size Y19015 1129025 1319030 1369035 1619040 1729045 1929050 1819055 216

Size BX CX9015 260 1359025 277 1499030 279 1739035 297 1929040 333 2059045 353 2269050 343 2249055 365 255

D - 26

Technical

Com

mon

Y1

BX

CX

9015 9055 Right Angle Double, Triple, Quadruple /Parallel Double, Triple, Quadruple

Air Breather

Drain Valve

TECHNICAL DATA Option Dimension Uprignt

Size Y1 FY9060 272 2149065 307 2149070 306 2399075 341 2399080 341 2599085 381 259

Size CW9060 3189065 3579070 3559075 4029080 3979085 441

Size CX GS9060 170 319065 170 319070 155 339075 155 339080 155 349085 157 34GS

CX

CW

Y1Y1

FY

[9060~9085 Double reduction right angle and

double reduction parallel]

[9060~9085 Triple and quadruple reduction right angle and

triple and quadruple reduction parallel]

Size Y19060 2299065 2649070 2639075 2989080 2989085 338

D - 27


Oil Level Gauge

Air Breather

Drain Valve


Size Y19060 2299065 2649070 2639075 2989080 2989085 338

Size CX HP9060 120 479065 120 479070 120 479075 120 479080 110 479085 110 47

Y1

CX

HP

D - 28

Technical

Com

mon

Note) Oil level gauge is not max dimension.


Air Breather

Drain Valve

Oil Level Gauge


Size Y19060 2349065 2649070 2679075 3029080 3019085 341

Size BX CY9060 335 2149065 335 2539070 360 2519075 360 2989080 380 2839085 380 327

Y1

BX

CX

D - 29

Note) Oil level gauge is not max dimension.

Right Angle Double, Triple / Parallel Double Right Angle Quadruple / Parallel Triple, Quadruple


Air Breather

Drain Valve

Oil Level Gauge

TECHNICAL DATA Option Dimension Uprignt

Size HW9090 8399095 8899100 9399105 9899110 10399115 1089

Size CX GS9090 162 459095 162 459100 162 469105 162 469110 162 489115 162 48

Size CW9090 4359095 4659100 4759105 5109110 5259115 575

Size CX GS9095R2 172 629105R2 172 629115R2 172 69

HW

CW

CX

GS

CX

GS

D - 30

Technical

Com

mon



Air Breather

Drain Valve

Oil Level Gauge

Size V W Y1 Y29090 626 90 3159095 626 90 3459100 706 100 3559105 706 100 3909110 766 100 4059115 766 100 440

Size CW9090 4059095 4309100 4559105 4809110 5059115 530

Size CX HP9090 162 429095 162 429100 162 439105 162 439110 162 449115 162 44

Y1

Y2

V W

CW

CX

HP

D - 31



Air Breather

Drain Valve

Oil Level Gauge

Right Angle Shaft Horizontal Mounting

Right Angle Shaft Vertical Mounting

D - 32

Technical

Com

mon

1. Direction shows lead wire outside of terminal box.2. The terminal box mounting direction can be changed in units of 90 degree in our factory. Please specify the direction when placing an order.

TECHNICAL DATA Motor Terminal Box Drive Unit

Right Angle Shaft Upright Mounting

Parallel Shaft Vertical Mounting

D - 33

TECHNICAL DATA Motor Terminal Box Drive Unit

1. Direction shows lead wire outside of terminal box.2. The terminal box mounting direction can be changed in units of 90 degree in our factory. Please specify the direction when placing an order.

(JEM Standard)

(IEC Standard)

(DRG 3401)

(DRG D3402)

kWxP Motor Flame A LB C D E φ MS H I LA LZ Thread Length Fig.5.5× 4P 132S 315 230 84 48 7 38 41.3 10 265 4-M12 22 D34017.5× 4P 132M 315 230 84 48 7 38 41.3 10 265 4-M12 22 D340111× 4P 160M 350 250 114 32 7 42 45.3 12 300 4-M16 32 D340115× 4P 160L 350 250 114 32 7 42 45.3 12 300 4-M16 32 D3401

18.5× 4P 180M 350 250 114 32 7 48 51.8 14 300 4-M16 32 D340122× 4P 180L 350 250 114 32 7 48 51.8 14 300 4-M16 32 D340130× 4P 200L 400 300 114 32 7 55 59.3 16 350 4-M16 32 D340137× 4P 225S 450 350 144 48 7 60 64.4 18 400 8-M16 32 D340245× 4P 225M 450 350 144 48 7 60 64.4 18 400 8-M16 32 D340255× 4P 250M 550 450 144 32 7 65 69.4 18 500 8-M16 32 D3402

kWxP Motor Flame A LB C D E φ MS H I LA LZ Thread Length Fig.5.5× 4P 132S 315 230 84 48 7 38 41.3 10 265 4-M12 22 D34017.5× 4P 132M 315 230 84 48 7 38 41.3 10 265 4-M12 22 D340111× 4P 160M 350 250 114 32 7 42 45.3 12 300 4-M16 32 D340115× 4P 160L 350 250 114 32 7 42 45.3 12 300 4-M16 32 D3401

18.5× 4P 180M 400 300 114 32 7 48 51.8 14 350 4-M16 32 D340122× 4P 180M 400 300 114 32 7 48 51.8 14 350 4-M16 32 D340130× 4P 180L 400 300 114 32 7 55 59.3 16 350 4-M16 32 D340137× 4P 200L 450 350 144 48 7 60 64.4 18 400 8-M16 32 D340245× 4P 200L 450 350 144 48 7 60 64.4 18 400 8-M16 32 D340255× 4P 225S 550 450 144 32 7 65 69.4 18 500 8-M16 32 D3402

22.5

8 - LZ

PCD LA. II

H

MS

22.5

C

E

D

LB A

C

ED

LB A

4-LZ

PCD LAI

H

MS

45

D - 34

Technical

Com

mon

TECHNICAL DATA Motor Flange Dimension IEC, JEM Standard

D - 35

T N m

R m

D mN r/min

V(m/s)

F N

V(m/s)F N

F N

V(m/s)R m

N r/min

D - 36

Technical

Com

mon

TECHNICAL DATA Formula of Drive System SI Units

1. Revolving Speed N(r/min), Velocity V(m/s)

2. Torque T (Nm)

3. Power P(kW)

4. Power P(kW), Torque T(Nm), Revolving Speed N(r/min)

P = (kW), T = (N m)N T9550

9550 PN

P = (kW), F V1000

2

1000× 60

V = 2 R (m/s)N60

∴ P = F 2 R N

601000

Since T = F R

= N F R (kW)

2

1000× 60P = N T =

N T9550

(kW)

V = D (m/s)

D Wheel Diameter (m) =3.14

N60

T = F R (N m)F：Load（N）R：Wheel Radius (m)

P = (kW)

F：Load（N）V：Velocity (m/s)

F V1000

V1 (m/s)V2 (m/s)

m (kg)

tA (s)

FA (N)

tA (s)

V1 (m/s)V2 (m/s)FA (N)

D m

R m

N1 r/min N2 r/min

D - 37

TECHNICAL DATA Formula of Drive System SI Units

5. Acceleration Force FA (N)

6. Acceleration Torque TA (Nm)

7. Synchronized Revolving Speed of AC Motor N0 (r/min)

8. Rated Revolving Speed of AC Motor N(r/min)

m = Weight (kg): Acceleration (m/s2)

tA : Acceleration Time (s)

FA = m ･ = m ･ V2 - V1

tA

(N)

= m ･ V2 - V1

tA

TA = FA ･ R , FA = m ･V2 - V1

tA

V2 = ･ D ･ , N2

60 V1 = ･ D ･ , N1

60

∴ TA = m

2 R

60tA

R

=

(N 2 - N1)

2 m R

60

N2 - N1

tA

R

=m R2

9.55

N2 - N1

tA

(N m)

Since m R2is J (Moment of Inertia : kg m2)

TA= J9.55

N2 - N1

tA

(N・m)

D = 2 R

120 fP

No = (r/min)

f: Power Supply Frequency (Hz)P: No. of Motor Poles

N = No(1 - S) (r/min)

No: Synchronized Revolving Speed (r/min)

S: Slippage

D - 38

Warranty Period

The warranty period for the Products shall be 18 months after the commencement of delivery or 18 months after the shipment of the Products from the seller's works or 12 months from the Products coming into operation, whether comes first.

WarrantyCondition

In Case that any problems, troubles or damages on the Products arise due to the defects in the Products during the above "Warranty Period" , although the Products are appropriately and properly installed in, connected or combined to the equipment or machines, or maintained in accordance with the maintenance manual and are properly operated under the conditions as described in the catalogue or otherwise as agreed upon in writing between the Seller and the Buyer or its customers, the Seller will Provide, at its sole discretion, appropriate repair or replacement on the Products free of charge, except as stipulated in the "Exception for Warranty" as described below.However, in the event that the Products is installed in, connected or combined to or integrated into the equipment or machines, the Seller shall not reimburse the costs for removal or re-installation of the Products or other incidental costs related thereto and any lost opportunity, loss of profit or any other incidental or consequential losses or damages incurred by the Buyer or its customers.

Exceptionfor

Warranty

Notwithstanding the above warranty, the warranty as set forth herein shall not be applied to the problems, troubles or damages on the Products which are caused by:1. installations, connections, combinations or integration of the Products in or to the other equipment

or machines, which are rendered by any person or entity other than the Seller,2. the insufficient maintenance or improper operation by the Buyer or its customers, such that the

Product is not appropriately maintained in accordance with the maintenance manual provided or designated by the Seller,

3. the improper use or operation of the Products by the Buyer or its customers which are not informed to the Seller, including, without limitation, the Buyer's or its customers' operation of the Products not in conformity with the specifications, or use of the lubrication oil in the Products which is not recommended by the Seller,

4. troubles, problems or damages on any equipment or machines in or to which the Products are installed, connected or combined or installed, or any specifications particular to the Buyer or its customers.

Warranty

CCC Standards (China Compulsory Certification)China had implemented the China Compulsory Certification (CCC) system since May 1, 2003 as becomimg the full member of World Trade Organization (WTO). They have moved on to compulsory licensing on August 1, 2003.Motor capacity 1.1kW and below are subject to this certification, and requires CCC mark for sales in China.

Below table is our motor with CCC.

Motor Single phase motor Three phase motor AF motor AF motor（foot mount）

Capacity 15 90W 0.1 0.75KW 40 90W 0.1 1.1KW 0.1 0.75KW 0.4 0.75KWVoltage 220V 380V

Frequency 50Hz 50HzInsulation Class E Class B Class E Class F

Usage Indoor (IP44, IP55)AF motor：Motor for inverter

Difference with standard items• CCC Mark is on the nameplate.• Aluminum terminal box is the standard for three phase motor (except indoor specification for 40 90W).• Terminal block type (6 terminals, European system) is the standard for three phase motor (for 0.1kW or more).• Rotational direction is the opposite from Japanese domestic specification (in CCW direction looking from the anti-load side).• CCC correspondence motor coil is used.

Remarks• CCC approved/authorized motor is necessary for small type motors 1.1kW and below when exporting to China for domestic use.• Import of items subject for CCC without certification may be permitted by applying for exemption in some cases.

Consult us if any clarification necessary.

China Compulsory Certificate

D - 39G2002E-3.0

SAFETY PRECAUTIONS

Strictly observe the safety rules for the installation place and the equipment to use. (Industrial Safety and Health Law, Technical Standard for Electric Facilities, Extension Rules, Plant Explosion

Guidelines, Building Standards Law, etc.) Carefully read the maintenance manual before use. If the maintenance manual is not on hand, make a request for one to the distributor at which you purchased the product or to our sales department. The maintenance manual should be sent to the actual user.

Select an appropriate product that matches the operating environment and usage. Install a protective equipment on the machine side when the machine is used for transportation of passengers or for elevators, escalators, and dumbwaiters.

When the machine is used for food processing equipment and others that are susceptible to oil, install an oil pan or other damage preventive devices in case of oil leakage due to failure or termination of service life.

paramax 9000

Documents

selection b

selection c

hollow shaft d

option dimension d

installation d

cooling fan dimension

motor flange dimension

parallel shaft b