paacet profile complete 2010

7/21/2019 Paacet Profile Complete 2010

1/50

Mechanical Engineering

Electronics & Communication Engineering

Electrical & Electronics Engineering

Applied Electronics & Instrumentation Engineering

Computer Science & Engineering

Civil Engineering

P.A. AZIZ COLLEGE OF

ENGINEERING & TECHNOLOGY (PAACET)Approved by All India Council for Technical Education and Affiliated to University of Kerala

An ISO 9001-2008 Certified Institution


2/50

Mohammed ThahaChairman & Managing Trustee of PAACETChairman of the Advisory Board

Dr. J.S. RaoM.Tech (IIT Kharagpur), Ph.D (IIT Kharagpur), DSc (IIT Kharagpur)

ormer Professor and Head of the Departmentof Mechanical Engineering, IIT Delhi & IIT Kharagpur

Dr. BhattacharyaM.Tech (IIT Delhi), Ph.D (IIT Delhi), Former Head of theDepartment, Electrical & Electronics Engineering, IIT Delhi &Head of Advanced Centre for Research in Electronics (IIT Delhi)

Dr. N. PrabhakaranM.Tech. (IIT Kharagpur), Ph.D. IIT (Kanpur)

ormer Professor & HOD, NIT, Calicut &ormer Principal, PAACET

Dr. S.M. RaoM.E. (IISC Bangalore), Ph.D. (Cornell University, USA)Head of Advanced Super Computing Department(IISC Bangalore)

Dr. R. Raveendran Nair, M.Tech, Ph.D.(IIT Delhi),Former Prof & HOD Mechanical Engineering & Dean - PG,NIT Calicut & Former Principal - Calicut UniversityInstitute of Technology, Calicut & PAACET, Trivandrum

Dr. P. R. Sreemahadevan Pillai, Principal, PAACETM.Tech. (IIT Bombay), PGDBA, Ph.D, FIE, FIVFormer Principal, Sree Chitra Thirunal College of Engineering,Thiruvananthapuram.

Dr. Y.V.K.S. Rao, Director-Academics, R&D, PAACETM.Tech (IIT Kanpur), Ph.D. (IIT Delhi), Post Doctoral-ImperialCollege, London.M.AeSI, M.ISNDT., M.ISAMPE., M.AEWG,Former Deputy Director, Indian Space Research Organization.

ADVISORY BOARD

Dr.P.R.Sreemahadevan Pillai M.Tech. (IIT Bombay),

PGDBA, Ph.D, FIE, FIV, PrincipalDr. Y.V.K.S. Rao M.Tech (IIT Kanpur), Ph.D. (IIT Delhi),

Post Doctral ( Imperial College, London)Director-Academics, R&D, PAACET

Dr. Manoj .V M.Tech( NIT Warangal) , Ph.D. (IIT Madras),Prof & HOD- Dept. of ME

Dr. Sajeev V. MS ( IIT Madras), Ph.D. (IIT Delhi)Prof - Dept. of ME

Dr.R.Veeramony MSc., Ph.D., Prof & HOD, Dept. of MathsDr. Sherief Rawther MSc, Ph.D., Prof & HOD, Dept.of S&HDr. S. Bindu MSc., Ph.D., Prof- Physics

aganath L.C M.Tech., HOD - Dept.of E&CVijayalekshmi S. M.Tech., HOD - Dept.of EEE

Raji C.G. M.E., HOD - Dept. of CS&EBindu Biju M.Tech., HOD - Dept.of CEN. Jerard MSc., M.Phil., Asst. Prof - Dept. of MathsArunachala Perumal M.E., M.Phil., MBA, Asst. Prof - Dept.of ECESreejith B.J. M.Tech., Asst. Prof-Dept. of MEHari Venkit M.Tech., Asst. Prof-Dept. of MEAnish K. John M.Tech., Sr. Lecturer - Dept. of MEAnuroopa A. M.Tech., Sr. Lecturer - Dept.of EEEAshkar Mohammed M.E., Sr. Lecturer - Dept.of AEIBeena A.O M.E.,Sr. Lecturer - Dept.of ECEDeepesh Edwin M.Tech., Sr. Lecturer - Dept.of AEIDeepthi L.R. M.E., Sr. Lecturer - Dept.of CSEGeena Suresh M.Tech., Sr. Lecturer - Dept.of EEE

ayaprakash R. M.Tech., Sr. Lecturer - Dept.of ME

Manoj M M.Tech., Sr. Lecturer - Dept.of AEINabeela Koya M.Tech., Sr. Lecturer - Dept.of AEIPreetha P.V. M.Tech., Sr. Lecturer - Dept.of EEESaju Rajendra Prasad M.Tech., Sr. Lecturer - Dept.of EEESmitha J.C. M.Tech., Sr. Lecturer - Dept.of CSEAnju P.T. M.Tech., Lecturer - Dept. of CEAnoop M.R. M.Tech., Lecturer - Dept. of MEAnssa T.H. B.Tech., Lecturer - Dept.of EEEAnza Mathew M.E., Lecturer - Dept.of ECEArun P.S. M.Tech., Lecturer - Dept.of ECEArya Gowri G. B.Tech., Lecturer - Dept.of EEEAsha M.C M.Sc.,B.Ed., Lecturer- PhysicsAswathy R.S. M.E., Lecturer - Dept.of CSE

Azeem Hafiz P.A. M.Tech., Lecturer - Dept. of MEBaiju V. M.Tech., Lecturer - Dept. of MEBeulah P.W. Ruby M.E., Lecturer - Dept.of ECEBibin Raj V.S. M.E., Lecturer - Dept. of EEEBindiya B David M.Tech., Lecturer - Dept.of CEDeepa B.R. M.Tech., Lecturer - Dept.of CEDeepa Paul M.Tech., Lecturer - Dept.of CEDeepthi K Moorthy M.E., Lecturer - Dept.of CSE

Indulekshmi B M.E., Lecturer - Dept.of AEI

Jayalakshmi R. M.Tech., Lecturer - Dept.of CEJayareshmi.J M.Tech., Lecturer - Dept.of ECEJeena G.K. B.Tech., Lecturer - Dept.of EEEJeevan. P M.Tech., Lecturer - Dept.of CEJesna Mohan M.Tech., Lecturer - Dept.of CSEK. Anuradha MSc, BEd, M.Phil., Lecturer-Dept. of MathsLakshmi Praveen B.Tech., Lecturer - Dept.of ECEMali Gopinath M.Tech, Lecturer - Dept. of EEEMammatha M.C. M.Tech., Lecturer - Dept. of CEMehda B. M.Tech., Lecturer - Dept.of CSEMili Rosline Mathews M.Tech., Lecturer - Dept.of ECENisha Rani K.L. M.Sc., B.Ed., M.Phil., Lecturer - ChemistryNishara V. Deth M.Tech., Lecturer - Dept.of ECE

P.G. Renju M.Sc., BEd, M.Phil., Lecturer-Dept. of MathsPadmavathy Devi M.Tech., Lecturer - Dept.of CSEPraseeja V. M.Tech., Lecturer - Dept.of EEEPrashanth V.T. B.Tech., Lecturer - Dept.of ECEPreetha V.H. M.E., Lecturer - Dept.of ECEReeja S Raj M.Tech., Lecturer - Dept. of CERekha P. Nair M.E., Lecturer - Dept. of EEERency Rajan B.Tech., Lecturer - Dept.of AEIRenjini Rani M.Tech., Lecturer - Dept.of CSEResmi P Nair M.Tech., Lecturer - Dept.of CESabu S Joseph M.E., Lecturer - Dept.of MESaji S.J. M.Tech., Lecturer - Dept.of MESajitha P. M.Tech., Lecturer - Dept.of ECESajni Nirmal M.S., Lecturer - Dept.of CSE

Sandeep C.S. M.E., Lecturer - Dept.of AEISandy Virgin M.E., Lecturer - Dept.of CSESanjayan Chandrashekaran M.P.E.d, M.Phil., Lecturer- Physical EducationShaeba C.S. M.E., Lecturer - Dept.of CSEShani T. M.Tech., Lecturer - Dept.of ECESheeja Bhasker MSc, B.Ed., M.Phil, Lecturer - Dept.of MathsShreya A.S. B.Tech., Lecturer - Dept.of EEESoumya Babu Sreejith M.Tech, Lecturer - Dept.of ECESoumya K.P. M.A., Lecturer- EconomicsSuni S.S. M.Tech., Lecturer - Dept.of ECESwapnasree P.A. M.Tech., Lecturer - Dept.of ECEV.S. Reshmi M.Sc., B.Ed., M.Phil, Lecturer - Dept. of MathsVijitha R.B. M.Tech., Lecturer - Dept.of ECE

Dhanya Dinesan M.Tech, Guest Lecturer - Dept.of CENikkitha P. M.Tech, Guest Lecturer - Dept. of CEBinu Ramachandran B.Com., CFA, ACA, Finance ManagerSanjith S.L. B.Tech.,CCNA, Senior System ManagerSreeKumaran Nair B.Sc. Engg., Workshop SuperintendentNikhil Eyeroor M.A., M.LISc, M.Phil, DSc (Colombo)

Chief Librarian

PAACET MAINTAINING OUTSTANDING ACADEMIC STANDARDS

CURRENT LIST OF FULL TIME FACULTY MEMBERS


3/50

The Late P.A. Aziz has been a Social, Political and Trade Union leaderwho devoted his entire life for uplifting the weaker sections in Kerala

State. He was an honest and committed leader with a strong vision to

serve the society.

The College

P.A. Aziz College of Engineering & Technology (PAACET) was established in 2003

under the patronage of P.A. Aziz Trust. The Engineering College and the Trust is

formed to fulfill the vision of Late P.A. Aziz. PAACET is the epitome of the vision of

P.A. Aziz Trust. The Trust shall continue to strive in building institutions of academic

brilliance.

The Location

PAACET is situated at a scenic campus which is 500 meters above the sea level, just

7 Kms away from Kowdiar Palace, Trivandrum City. The campus is spread over 37

acres of landscaped land providing natural ambience for academic quest. TheCollege campus and its surroundings offer a picturesque panoramic view.

Infrastructure

The College is equipped with state-of-the-art facilities and infrastructure enabling

the students to develop their knowledge and skills in a perfect environment. Highly

qualified and experienced teaching staff (most of them from IITs and other pioneer

institutions) guide the students with total focus on achieving set targets. Extended

academic support by classroom discussion, group discussions, series tests, re-tests,model examinations and seminars are our priorities. The college gives great

importance for cultural and social activities for the overall development of

student's personality.

THE INSPIRATION


4/50

WELCOME FROM THE CHAIRMAN

PAACET has become one of the premier institutions in South India in a short span of 7 years.

The vision of PAACET is to become an advanced technology institution with Global standing.Our focus is to provide an accessible, high quality learning environment that is open,

innovative, challenging and enterprising, and ultimately placing our graduates to take up

promising and highly rewarding job assignments that are on offer.

We are committed to developing new programmes in line with changing priorities and

business needs, often working in partnership with an employer. This approach enables our

students to acquire the new skills and knowledge necessary to progress in their chosen career.

For this reason, and many more, our employability rates compare favourably with other higher

education institutions.

Several prestigious employers are actively employing PAACET graduates because of ourevidenced academic ethics, and the practicality of other courses offered in emerging

technologies other than normal University syllabus.

Our campus is as innovative as our vision. Our facilities have the flexibility to accommodate

the technology of today and adapt changes that faces a dynamic industry.

PAACET provides an environment that encourages academic excellence. As the educational

programs evolve over the next few years, we hope to achieve more multi-disciplinary

integration that helps to develop the person beyond technical expertise.

PAACET is concerned about personalised opportunity where students can create the future

within an environment of support, with excellent faculty and facilities. PAACET is an academic

institution, which is justifiably proud of its activities.

One of its great strength is that of a social institution where students, faculty and parents

together develop lasting relationships.

Should you choose to become a PAACET family member you will find, you have chosen a place

of worship, which will give you a lifetime of support.

I look forward to welcoming you to PAACET as we determinedly pursue our goal to berecognised as the acknowledged centre of excellence in modern technology in India.

Mohammed Thaha

Chairman & Managing Trustee


5/50

MESSAGE FROM THE PRINCIPAL

Engineering education in India has grown to an unprecedented scale with the advent of myriad newgeneration institutions offering under-graduate and post-graduate programmes in advancedtechnology with tremendous job potential in India and abroad.

The growth indices need not necessarily ensure the quality of the higher education sector in thecountry. Some committed institutions have understood the fact that only the fittest will survive and withthis vision they have focused on developing the quality. By deploying well qualified manpower,sufficient infrastructural facilities and a disciplined ambience for an effective teaching-learning process,PAACET has joined this group of handful successful institutions. The simple fact that almost all ouralumni and alumnae have been placed by reputed employers, mostly by campus interviews in the finalyear, is just an indication of what they get from the alma mater.

Small things make perfection, but perfection is not a small thing. At PAACET, nothing is left to chance.The College has already emerged as one among the most reputed institutions in the peer group andwith a clear vision and mission, our team of competent faculty and devoted Management target at

nothing less than a Centre of Excellence at the National Level in the near future and a globally reputedcampus in the long run.

Within the 7 years of existence, the College has acquired all the necessary facilities including sufficienthigh quality built-up area, most advanced and sophisticated laboratory equipment, fully automatedlibrary with more than sufficient number of titles and journals, large fleet of high-tech college buses,excellent canteen and hostel facilities and the like.

We not only train the students to be good professionals but also see to it that they grow up with abalanced value system and the confidence to face the challenges of life. The academic system in theCollege takes care of the students individually and the parents are kept informed about theirperformance. Periodic test papers and model examinations equip the students to face the University

examinations with ease.

In addition to the academic development, the overall development of the individual is also our concern.Sufficient facilities for sports and games are provided in the campus. The annual cultural festival helps indeveloping the leadership skills of the students. Personality development programmmes and soft-skilltraining help the students in facing the campus interviews with confidence and emerge victorious.

People always like to associate with successful people and organizations. Success is not a gift and is thefruit of perspiration. No one can succeed in a job, which they can not enjoy. Brain and memory arebiological entities for which, periodic and intelligent activation is a sine qua non. Only a student-centredinstitution can attend to this. This we feel is the strength of our unique institution.

We at PAACET always remember that in this era of Information Technology, the knowledgeable leads. We

do not want to produce mere engineers, but knowledge leaders with a mission for the future. In thispursuit, we whole-heartedly welcome the sincere and hardworking students to join our bandwagon ofsuccessful engineers to build a nation of achievers.

Dr. P.R. Sreemahadevan PillaiPrincipal


6/50

MESSAGE FROM THE EXECUTIVE DIRECTOR

Welcome to PAACET.

It is our prime concern to empower the young men and women who join PAACET with thekind of creativity, leadership qualities combined with traditional values and skills that the 21st

Century world of technology would anticipate.

At PAACET, our programmes are focused, innovative and effective. Our emphasis is on

interdisciplinary approach, teamwork, creativity and communication. Our faculty members

are from prominent institutions across the nation with a wealth of accomplishments that

enable them to inspire as they teach.

PAACET is involved not only in imparting knowledge but also in developing creativity through

research and seminars.

The students at PAACET have a personal responsibility for their education. During their

education, students have the opportunity to develop critical thinking and analytic reasoning

as well as problem solving skills.

The college recognises the need to ensure that its programs are current and offer

state-of-the-art facilities to students. We have the technology and the facilities to lift our

graduates, in addition to their academic qualifications; have the skills and knowledge to

commence on further developing their career.

PAACET extends special facilities for students that would include extended library hours,

additional faculty support after normal class hours, dedicated internet access, syndicate

rooms for group study and discussion and access to specific stock for advanced technology

reading requirements.

It is our commitment to focus on all aspects of providing quality education and guide our

students to face the new challenges in the world with confidence.

Arun Paniyan

Executive Director


7/50

MESSAGE FROM THE DIRECTOR - ACADEMICS,RESEARCH & DEVELOPMENT

PAACET started with the sole aim of providing quality education to the prospective engineers. TheCollege has been among Keralas premier institutes in imparting technical education and hasprovided a great impetus to the field of technology. The Management believes in inculcating properethics to students to achieve excellence in academic and co-curricular activities. The College isorganizing a plethora of activities round the year and in recognition of quality and scale, a number ofaccolades have been received from different quarters.

With the emerging new technologies, it is essential to expose the students to higher levels ofadvancement in their field of interest. In this context, the Management of PAACET aims at providingexposure to most modern technologies including:CAD, CAM, CIM and concurrent engineeringComputer Simulation and AnalysisSetting up DSP lab with recent developmentsExtensive Use of MATLAB and MULTIMEDIA Softwares

AUTOCAD, PRO, ANSYS and other Analysis SoftwaresPCB lay out, design and fabrication facilityMechanism and Vibration LaboratoriesMaterial testing and Metallography LabComputational Fluid DynamicsMicro Electro Mechanical SystemDevelopment of Softwares for Embedded SystemsImaging TechnologyRobotics and artificial intelligenceCryptographyMetaprogrammingWeb Design and Applications

VirtualisationE-GovernanceVLSI DesignNeural NetworksNano technology

ThermographingFailure analysis of electrical machines and condition monitoring

Training the students for CCNA, CCNP and MSCE programmesIndustry oriented courses for studentsConducting extra classes for the students to appear for GATE

With the accomplishment of the above, I am sure PAACET will turn out to be a great force to reckon

with. We may very soon realize that PAACET has grown on par with the Indian Institutes of Technologyand Indian Institute of Science in the advancement of Technology in the Country.

Dr. Y.V.K.S Rao

Director - Academics, Research & Development

After Ph.D. from IIT Delhi and Post Doctoral from Imperial College

London Dr. Rao, had 32 years of Industrial, Research & Academic

Experience, guided 200 students for B.Tech/M.Tech projects and 5 forPh.D. He has published 70 Technical Papers in International Journalsand authored 750 technical reports. Dr. Rao also taught M.Tech

students in IIT Delhi. He was also expert member in Union Public

Service Commission for selection of Professors, Investigator of ARDB

projects and served as an expert panel member for awarding Ph.D.

Degrees in IITs and Banaras Hindu University, Varanasi


8/50

PAACET CAMPUSlocated 7 kms from

Kowdiar Palace,

Trivandrum City.

Central Block

The College is designed by well-known Architects, M/s. Iyer & Mahesh,

Trivandrum.

The Central block is a 4 storeyed building with a floor area of 75,000

sq.ft. The classrooms, library and laboratory are custom built, very

spacious and well arranged with quality furniture and teaching aids.

Administration block is a 3 storeyed 15,000 sq.ft. building with one

floor below the ground level. An access bridge with 40ft. length is

connecting admin. block and central block.

Two separate sub-blocks with a total floor area of 30,000 sq.ft. are

occupied as Electrical and Mechanical Departments.

Two toilet blocks for boys and girls separately in each block with

3,000 sq. ft. area with modern accessories and fittings.

Workshops are in separate four buildings of RCC construction. Each

building has a floor area of 10,000 sq. ft..

The hostels for boys and girls are separate buildings with a total floor

area of 60,000 sq.ft. Each hostel has Reading room, Canteen,

Recreational facilities together with Health Club/Gym, Internet

Facility, etc.

THE CAMPUS

Central Block Passage

Administration Block

Mens Hostel Block

Sub Block 1

Administration BlockAdministration Block Sub Block 1


9/50

PAACET WORLD

Computer LabFully air-conditioned and properly furnished Computer lab, with 300 Intel Pentium IV nodes withHT Technology connected to four COMPAQ servers with raid support and dual processor. Thepractical sessions are made easier with the latest versions of advanced software including WindowsXP Professional and Windows 2008 server. Linux Fedora and fully automated digital library software

and with systems connected to LAN provide round the clock internet access.

LibraryCentral library of PAACET is an outstanding learning resource centre catering to the ever increasinginformation needs of PAACET family. The Central library has acquired over 13, 000 books, 80 plusprint journals, 500 plus e-journals, over 600 CDs/DVDs and other audiovisual materials. The totallibrary activities are automated with the software Campus Dimensions. The entire collection ofbooks is bar-coded and the transaction of books is smart-card based. Ten workstations are madeavailable in the central library to access internet facility and the digital library. PAACET library is theprivileged member of INDEST- AICTE Consortium for e- Journals and DELNET, since 2006. The

massive set of digital resources of the central library consists of e-books, e-journals and otherlearning resources available through open access initiatives, made available 24 x 7 through thecampus intranet.

Power SupplyThe college has its own 11KV Transformer and distribution network. In the event of power failure250 KVA,160 KVA and 40 KVA stand-by generators are in place which will cater to all facilities withinthe campus.

RestaurantThe College has within the campus a full fledged Restaurant providing quality breakfast, lunch anddinner at subsidised prices.

College Store

A college store providing all essential commodities including stationery are available within thecampus.

College BusThe College owned high tech luxury coaches meet the transportation requirement for studentsand faculty from Attingal, Venjaramoodu, Vembayam, Nedumangadu, Neyyattinkara, Kaniyapuram,Kazhakoottam, Kilimanoor, Kanjiramkulam, East Fort, Vattiyoorkavu, Kattakada, Valiyathura, Chaaka,Medical College, Poojapura, Kudapanakkunnu, Peroorkada and various other boarding points from

Trivandrum.


10/50

DEVELOPING WELL ROUNDED PERSONALITIES

Students and faculty members of PAACET are engaged in various co-curricular activities on a

regular basis. Thus, we have various student chapters at PAACET where two of our faculty

members assist in each chapter.

IEEE As the largest Technical professional body in the World with 3.6 lakhs members spread

over 175 countries, IEEE would enable the students professional advancement up to Fellow

grade in due course.

A branch of the Computer Society of India with the participation from faculty and students has

been established. The Society has reciprocal membership arrangement with British Computer

Society (BCS) and Australian Computer Society (ACS). The Society recommends candidates

from India for CICC Training course in Japan.

The ISTE student chapter in PAACET would enable students to partake in a wide variety of

creative technical activities. Students can participate in the ISTE student National Conventionsheld in different parts in India. The best student member also get an Award.

Parent Teacher Association (PTA), acts as a quality assurance forum. It meets periodically and

provides creative suggestions for the overall development of the institution.

A Career Guidance and Placement (CGP) cell is successfully functioning in PAACET to arrange

the following programmes:

Placement Training Programmes

Cisco Training Programmes

Autocad Software Programmes

Training Programme for soft skills Programmes for Personality Development and Communication skills

Psychometric Tests Experiential Exercise Group Discussions Mock Interviews

Resume Preparation Confidence Building Public Speaking

Career Guidance and Corporate Placements in India & abroad


11/50

MECHANICAL ENGINEERING

Students of this course are taken through fundamental concepts of thermal science and

metallurgical engineering,towards cutting edge technologies like computational fluid

mechanics, Computer Aided Manufacturing, CAD Lab, Metrology, Statistical Techniques inModern Manufacturing, Finite Element Software Analysis, Industrial Heat Transfer etc.

After undergoing the common courses in the first two semesters, the students undergo

courses in Numerical Analysis and Programming, Electronics, Thermal Science, Mechanics of

Solids, Mechanics of Fluids, Foundry Technology and theoretical Induction courses in

Kinematics and Dynamic of Machines, Heat Transfer and IC Engines. Electrical Machines,

Operations Research, Manufacturing, Computer Graphics and Multimedia in semester 3 and 4.

All these courses are supplemented by Lab Work and Practical Experimentation.

In semester 5 and 6, the students are trained in latest subjects like LAN and Networking,

Machine Designing, Press Working, Data Base Management Systems, Micro Processors, FluidSystems, Metal Cutting etc., Fracture Mechanics, Precision Engineering, Turbo Machinery,

Advanced Management Types etc.,(supplemented by appropriate practical and laboratory

work).

In semester 7 and 8, the subjects covered are the most modern and advanced, involving

Metrology, Computer Aided Manufacturing, Mechatronics, Quality Control and Quality

Assurance covering Statistical Techniques, ISO-9000 standards, Advanced Methods of

Manufacturing including Non-Traditional Machining Methods like EDM and ECM.

As an elective subject and to cover advanced techniques, the students are given courses in

Computer Aided Design, Automotive Engineering, selected specialised topics in Management

etc, supplemented by appropriate practical work in the laboratories.


12/50

ELECTRONICS & COMMUNICATION ENGINEERING

Being the foundation of the IT revolution, the students of this branch are prepared with a sound

knowledge of basic sciences, provided with a deep understanding of digital systems design,

digital and analog communication, computer software and circuit simulation tools.

Starting with basics of Mathematics, Physics and Chemistry, the students are trained in

Programming Techniques, Data Structure, Operating Systems and Computer Graphics. After the

end of second year, they have six-week in-house practical training in which they get hands-on

experience in simulation and design software tools - PSPICE, ORCAD and Electronic Work Bench.

Special training of circuit simulation software like MATLAB and VLSI software is given in the third

year.

At the end of fifth semester, students take advanced courses like Digital Signal Processing, VLSI

design, Data Communication Networks, Advanced Microprocessors and Microwave Engineering

and more than adequate practical knowledge of software, hardware and interfacing techniques.At the end of the sixth semester, the students take a six-day industrial training. This gives them a

chance to experience the real world working environment. In the seventh semester, specialized

electives include fibre optical communication and advanced VLSI fuzzy systems.

In the final semester, with prior sound knowledge of hardware, software and industrial exposure,

the students carry out their final year working projects. Along with that they study advanced

subjects like Satellite and Mobile Communication, Artificial Neural Networks, Photonic Systems,

Embedded Systems, Pattern recognition etc.

The department is having well established

DSP Lab equipped with MATLAB, Code Composer Studio, Texas Instruments Processors etc.

Communication Engineering Lab equipped with modern analog and digital modulation kits.

Microwave and Optical Communication Lab equipped with Klystron and Gunn Microwave set-

up, Analog and Digital Optical Link kits, Advanced antenna systems etc.

Microprocessors and Microcontrollers Lab equipped with 8085, 8086, 8051, 8052 processors,

Embedded Development kits and IDE.


13/50

This branch is one of the main or parent branch of Engineering. It is considered as a lifeline of

any industry. It offers job opportunities in almost every industry since electricity is the main

source of energy. With the increasing demands of growing population, its future anywhere inthe world is very bright. There is vast potential of its further development in the country.

The students of this branch get a strong foundation in Allied Sciences and Basic Engineering

across a spectrum of disciplines, in the first year of their course work. In the third semester

they get to know about DC motors, Transformers, Solid State Devices & Network analysis. In

the next semester they get basic idea regarding Power System, Measurements &

Instrumentation and Engineering Material Science. In the fifth semester they learn in depth

about Synchronous Machines, Advanced Measurements & Power Electronics. Induction

machines, Microprocessors, Electronic Instrumentation, Energy Conservation, and

Bio-medical instrumentation are covered in sixth semester. Seventh Semester covers diverse

topics such as Control System, Industrial Engineering & Management, Operating System andElectronic Communication. Seminars are conducted during this semester on advanced

Electrical & Electronics topics. Eighth Semester Syllabus includes Advanced Control theory,

Machine Design, Systems design & Digital Signal Processing.

The major laboratories included in the scheme are Electrical Machines Lab, Power Electronics

lab, Electronics Circuits Lab, Microprocessor Lab, Control System lab and Power System lab.

ELECTRICAL & ELECTRONICS ENGINEERING


14/50

CIVIL ENGINEERING

Students of this course are taken through the design, construction and operation of the facilities

essential for modern life ranging from transportation systems such as roads, railways, bridges, highways,

waterways and to look after the day to day needs such as water supply & public health, water treatment

plants & supply system, energy efficient buildings etc. Civil engineers are problem solvers, meeting the

challenges of pollution, traffic congestion, drinking water & energy needs, urban redevelopment and

community planning. We aim at moulding professional Engineers who can occupy an essential position

in the socioeconomic development of the nation.

After undergoing the common subjects in basic sciences in the first two semesters, the students

undergo courses in Building Drawing, Surveying & Levelling, Structural Analysis & Design, Strength of

Materials, Open Channel Hydraulics and Concrete Technology in semesters 3 and 4.

In semesters 5 and 6, the students are trained in Computer Aided Design and Drawing, Numerical

Analysis & Programming Methods, Highway, Railway & Airport Engineering, Bridge Engineering,

Geotechnical & Foundation Engineering, Environmental Engineering, Hydraulics and Water ResourcesEngineering. All these courses are supplemented with laboratory work.

In the final year, the students are trained on the design and drawing of various hydraulic structures, steel

structures and RCC structures. Elective papers on IT related subjects and Finite Element Method add to

the versatility of the curriculum. Thus we provide both the academic background and practical

experience to set on the path to become an excellent Civil Engineer with good prospects in India and

abroad.

The laboratory practical work for this course includes Surveying, Strength of materials, Concrete

Technology, Computer Aided Design and Drafting, Open Channel Hydraulics, Hydraulic Machinery,

Geotechnical, Transportation & Environmental Engineering.

Computer Lab - Civil Engineering College Store


15/50

The students of this discipline learn to face and win any situation they come across in the area of

Computer Science and Engineering. After providing sound foundation of basic sciences, mathematics

and computer fundamentals in the first year, the students of this stream are trained for proceduralprogramming concepts using C language and Computer Organization in the second year. Then they

are made to study Object Oriented concepts which are implemented with the help of C++. Courses

like Data Structures and Algorithms, Operating Systems and Computer Hardware Design are the other

subjects in the second year. The students are also trained on hardware aspects of Computer Science

with the help of courses like Digital Circuit Design and Digital System Design

Data Base Management, Compiler Design, advanced topics in Microprocessors, Computer Graphics

and Multimedia are taught in the third year with laboratory exercises to provide the case concepts of

efficient data handling and design of algorithms. System Programming, Computer Communication,

Software Project Management and Theory of Computation are also taught in the second year.

Advanced courses like Mobile Computing, Software Engineering, Knowledge Based System etc. aretaught in the final year to familiarize the students with the art of analysis and design in familiar

systems. The students are also given sufficient courses related to communication systems and circuits

with special emphasis on computer networks. Cryptography, Artificial Intelligence, Distributed

Computing, Pattern Recognition, Wireless Networks, Computer Architecture, Neural Networks etc. are

also covered in the final semesters.

Current developments in Computer Science and future trends are discussed in regular seminars in

which resource persons are invited from premier institutions, industries and research centres.

The laboratory sessions include Programming in C, Data Structures, Data Base, System Software,

Microprocessors, Algorithm Analysis and Design, Operating System and Networking Lab, Project Work

etc.

COMPUTER SCIENCE & ENGINEERING


16/50

This is an advanced branch of engineering in which students are trained to handle any situation

associated with instrumentation and is widely developing to involve day to day life activities. This

branch offers a wide range of job opportunities.

After providing a sound foundation in applied science, mathematics and basic engineering disciplines

in the 1st and 2nd semesters, the students enter the world of electronics as well as instrumentation.

They are trained in programming techniques, operating systems software tools like ORCAD, PSPICE,

MATLAB etc.

From 5th semester onwards, the students concentrate on instrumentation subjects. They get a

thorough knowledge in industrial and biomedical instrumentation and a good idea of control

systems, a widely discussed subject in research and development wings, through computer control of

processes, process control instrumentation etc.

All advanced software facilities like MATLAB, SIMLINK, Image Pro Express, Code Composer Studio, Keil,

Multisim, emulators and simulators for TMS and Analog DSP ICs etc. are available to the students for

their technical endeavors at the DSP Lab.

The Microprocessor lab is equipped with processors, hardware kits, evaluation boards, and all latest

Microcontroller chips with RTOS facilities for tests and experiments in the field of Embedded systems.

The Analog communication laboratory has Mixed Signal Oscilloscope, Logic Analyzer, Storage

Oscilloscope, LCR-Q meters and signal sources and analog and digital measuring instruments for a

range of electrical parameters.

The Advanced Biomedical Laboratory has facilities such as Embedded Patient Monitoring System,

Image Processing Work Station, Respiratory Analyzer and Nerve Simulator.

The Process control laboratory has workstations for temperature, pressure, flow and other control

parameters. These laboratories help the students to learn about PLCs and PLC programming.

APPLIED ELECTRONICS & INSTRUMENTATION ENGINEERING


17/50

PAACET GRADUATION CEREMONY 2007

Sreejith J S - S8 - EEE

Tiny John - S8 - EEE

Uni C H - S8 -EEE Ravi Shankar - S8 -EEE

Mathew Joseph - S8 -EEE

Sreeram - S8 - EEE Rjin John Scaria - S8 - EEE

Rifus Joshua Varghese- S8 - EEE Arun Shekhar - S8 - EEE Shaiju Mohan - S8 - EEE


18/50


Kiran - S8 - CS Najin- S8 - CS Safeer - S8 - CS

Abhilash B.P. - S8 - CS

Namitha V S - S8 - CS

Naushad - S8 - CS

Vishna H - S8 -CS Arun Babu - S8 -CS

Dinesh S - S8 - CS Sajeer A - S8 - CS

Ratheesh K - S8 - CS

Siju - S8 - CS Jenith M.S. - S8 - CS Rakesh T.G. - S8 - ECE

Ratheesh J R - S8 - CS


19/50



20/50



21/50



22/50



23/50

NATIONAL LEVEL TECHNICAL & CULTURAL FESTIVALS

CERVELLO-07 ORGANISED BY DEPT. OF ELECTRONICS

VALENTIA-07 ORGANISED BY DEPT. OF COMPUTER SCIENCE

SIGNATURE-07 ORGANISED BY DEPT OF ELECTRICAL & ELECTRONICS

INAUGURATION OF CIVIL ENGINEERING ASSOCIATION - LIVICX

HON. MINISTER FOR LAW AND SPORTS SRI. M . VIJAYAKUMAR INAUGURATED VALENTIA - 07

SRI. BHARATH GOPI INAUGRATED CIVIL ENGINEERING ASSOCIATION - CULTURAL FEST 2007


24/50

NATIONAL TECHNICAL & CULTURAL FESTIVAL CEREVELLOORGANISED BY DEPARTMENT OF ELECTRONICS & COMMUNICATION ENGINEERING &

DEPARTMENT OF APPLIED ELECTRONICS & INSTRUMENTATION ENGINEERING


25/50

TECHNICAL SEMINARS


26/50

PAACET FESTIVAL - TECHNICAL 2008


27/50

Lal Krishnan U. (EEE)Slash Support, KGISL

M. Yasmin (EC)KGISL

Mathew Pius (EEE)Slash Support, KGISL

Kiran M. (ME)IBS, Omnex

Kamal Lal M. B. (AEI)IBS

Justin Jose K. (AE&I)Slash Support, KGISL

Abdul Wahid A. (ECE)IBS

Abhiroop V. M. (ME)IBS, Omnex

Abraham Sampson (ECE)IBS

Annie Mathew (CS)KGISL

Anju Mohan (AE)KGISL

Anish Bhanu (ME)KGISL

Anoop K. Nair (ECE)IBS

Anoop S. A. (ECE)i-flex

Arunkumar P. (CS)KGISL

Annita Anna Samuel (CS)KGISL

Aswathi B. Raj (EEE)KGISL

Asif Anwar (ME)Omnex, KGISL

Deepak Shanker (EEE)KGISL

Deepthi Banujan (EEE)Slash Support, KGISL

Dhanoop A . P. (AEI)Slash

Benoj J. B. (ME)Omnex

Aswin Raj (ME)Omnex, KGISL

Jaseen A.N. (EC)KGISL

Narayan Kumar (EEE)Slash Support, KGISL

Nithin Titus (EC)Slash Support

Mridula Krishnakumar (EEE)IBS

Minu Rebecca Varghese (CSE)IBS, Slash Support

Mini Shivkumar Pillai (CSE)Satyam

Meghal Vijayan (AE)KGISL

Sanjay Singh Mathews (EEE)Infosys, Slash Support, KGISL

Raghavendra C. R. (ME)Omnex

Rejitha C. R. (CS)KGISL

Ranjith R. (ME)Slash Support, KGISL, Omnex

Rahul Rajeev (ME)Omnex

Rahul J. S. (EEE)IBS

Vaisakh B. (CS)KGISL

Vijin Victor (ME)Omnex

Vinayak Prabha (EC)Slash Support

Vishnu A (ECE)i-flex

Visakh B. Nair (ECE)IBS

Vinish Ramachandran (ECE)IBS

Saranya G. (EC)Slash Support, KGISL

Shabana Sulthana S. L. (AE&I)Slash Support, KGISL

Tincy Christopher (CS)Slash Support, KGISL

Sumesh M. G. (ME)Omnex

Sindhitha M. (CS)KGISL

Shahila H. S. (ECE)IBS

GUARANTEED PLACEMENT OPPORTUNITY

FOR OUR GRADUATES IN INDIA OR ABROAD

PLACEMENTS


28/50


29/50

Ragesh S I (ECE)Turbo Plus

Sindhu S S (EEE)Turbo Plus



PLACEMENTS


30/50

Althaf Sameer (ECE)Aryans Infoway

Jazeel J S (ECE)Aryans Infoway

Parvathy G Nath (ECE)UST, Satyam

Saneesh K P (ECE)Info Vista

Vipin Rajan (ECE)IBS

Dhaneesh M L (ECE)Turboplus

Dhanya V (CS)UST

Reenu Christopher (CS)Infovista

Anish Joseph (CS)Agile Programmers (P) Ltd

Anand K A (ECE)Indian Army, IBS

Jithesh S (ECE)Turboplus, Aryans Infoway

Prasanth Prathap (ECE)IBS

Sibi Simon (ECE)Aryans Infoway

Vishnu K H (ECE)Ernst & Young, Infovista

Dhanya B (ECE)Tturboplus

Akhila G (CS)Aryans Infoway

Harikrishnan S P (CS)TIME

Renju R S (CS)Torry & Harris

Anjana Krishnan K R (ECE)IBS, Satyam

Karthik M (ECE)Slash Support

Prasanth V H (ECE)IBS, Satyam

Sneha Rani P (ECE)HCL

Akhila S (EEE)Agile Programmers (P) Ltd

Diju Dinesh (ECE)L&T Infotech

Amitha K A (CS)Accord Software

Hridya Y Nath (CS)Aryans Infoway

Sailesh G (CS)IBS

Hashif Hussain (ECE)HCL Technologies, Time

Manoj Chandran(ECE)UST, Accenture, Satyam

Sajith J S (ECTurboplus

Vineeth V (CS)IBS

Aswin V S (EEE)Infovista

Rekha U S (ECE)Accenture

Devi Priya (CS)Turboplus

Rajelakshmi (CS)Adnix

Syamkumar M S (ECE)Slash Support, Adnix

Ganga K Moorthy (ECE)IBS

Lijash M I (ECE)Accenture, IBS, Satyam

Sajin S (ECE)IBS

Titty (CS)Ernst & Young

Anirudh Sudhakaran (EEE)HCL

Mohammed Thasim M (ECE)Slash Support

B Sreekala (CS)IBS

Prasanth U (CS)Adnix

Pratheesh V (ECE)Agile Programmers (P) Ltd

Deepa Muraleedharan(ECE)IBS

Kiran V L (ECE)HCL

Renjini V C (ECE)Satyam, Nest

Suresh R (ECE)Slash Support

Amithkumar K (EEE)Slash Support

Lekha M L (ECE)Turboplus

Anand H S (CS)UST

Noufal Shah S (CS)HCL Technologies

Shabnam Shahul (CS)Aryans Infoway

Anu M L (ECE)Infovista, Satyam

Keerthi Padmam (ECE)Slash Support

Rehna Xavier (ECE)HCL Technologies

Sreedeep S (ECE)ACCENTURE

Akash Santhosh (EEE)IBS

Jerin Sunny (ECE)Agile Programmers (P) Ltd

Amitha Rathiesh (CS)Infovista

Krishna O (CS)L&T Infotech, Satyam

Saranya S (CS)Aryans Infoway



PLACEMENTS


31/50

Krishan Das (CS) I B S,Agile Turbo Plus

Vidhu S R (CS)Turbo Plus Abhinand K S (ECE)

Turbo Plus

Salini G (ECE)Turbo Plus

Anjana R S (EEE)Turbo Plus

Vinu M (EEE)Satyam, Turbo Plus

Aju Das M J (ME)Turbo Plus

Aiswaria Priyadarshni(ECE)Turbo Plus

Anoop A G (EEE)Turbo Plus

Ambu M J (ME)Turbo Plus

Sulad S (ME)Turbo Plus

Rahul Somarajan (AE & I)Turbo Plus

Soin Dominic (ME)Turbo Plus

Vimal Syam (ME)Turbo Plus

Aneesh C Philip (ECE)Turbo Plus

Ramamoorthy (ME)L & T Infotech

Anu V Dev (ME)Omnex

Prabodh S S (ME)Aryans Infoway

N S Gokul Nath (ME)Accenture, Satyam

Sheena Latheef (ECE)UST, Satyam

Kiran C Kusmos (ME)Accenture

Rupesh S (ME)Omnex

Dheeraj M (ME)Omnex

Praveen C John (ME)Omnex

Abilash A K (ME)Omnex

Vinu M (ECE)Satyam, Infovista

Sreeram Pillai (ME)IBS

Sailesh K S (ME)Omnex

Arun M L (ECE)Turbo Plus

Antony P (EEE)Turbo Plus

Shajeer J (AE & I)Turbo Plus

Bhadra Sreekala (CS)I B S, Turbo Plus

Renjana (ECE)Adnix

Muhamed Shaw E (ME)Omnex

Sarath Kuttan S (ECE)Adnix

PLACEMENT CO - ORDINATORS

Manoj M., M.Tech. Hari Venkit, M.Tech. Sreejith B. J., M.Tech.



PLACEMENTS

Valliappa Ganesh M.Reliance Communications


32/50

P.A. AZIZ MEMORIAL GOLD ROLLING TROPHY

for the College secures overall maximum points

in Technical & Cultural Competitions in

PAACET FESTIVAL

22ct. 1.25 kilogram Gold Trophy

PAACET FESTIVAL

PAACET Festival was organised during March 2008. It was a dream to organise an event of this

magnitude.

Primary aim of PAACET Festival is to encourage students to bring out creativity and innovation

through technical & cultural talents.

Students across Kerala and South India participated in the week long event. Focus was to

create a platform for our young talents to challenge their creativity and establish a launch pad

in this new world.

The college introduced for the first time a spectacular Gold Rolling Trophy (22 ct. 1.25 kg of

pure gold) for the overall winners. The winners were judged based on their combined team

points both in technical & cultural events.

The festival was concluded with a gala closing ceremony featuring top artists from India and

the mega musical show was spearheaded by Kunal Ganjawala, Bollywood playback singer.

Management of PAACET has decided to conduct this grand Festival every year. The Festival

content will be improved year after year


33/50


34/50


35/50


36/50

PAACET FESTIVAL - TECHNICAL FEST 2009


37/50

PAACET FESTIVAL - CULTURAL FEST 2009


38/50

PAACET FESTIVAL - CULTURAL FEST 2009


39/50

PAACET FESTIVAL - 2009 - PRIZE DISTRIBUTION


40/50

PAACET FESTIVAL 2009 - CLOSING CEREMONY


41/50


42/50


43/50


44/50

PAACET COLLEGE DAY - 2009


45/50

PAACET COLLEGE DAY - 2009


46/50


47/50

PAACET SPORTS DAY - 2009

PAACET COLLEGE SPORTS TEAMS


48/50

PAACET INFRASTRUCTURE


49/50


50/50

P.A. AZIZ COLLEGE OF

paacet profile complete 2010

Documents