motoriduttori cc combinati dc double reduction gearmotors...ud cs cd 80 90 105 120 vedere tabella...
TRANSCRIPT
brand of
small but strong
DC
Motoriduttori CC combinatiDC double reduction gearmotors
NDWMPECWMP
Motoriduttori CC combinatiDC Double reduction gearmotors
NDWMPECWMP
B-M1
DC
0119A
Pag.Page
Indice IndexCaratteristiche tecniche Technical features BM2Designazione Classification BM2Versioni Versions BM2Simbologia Symbols BM2Lubrificazione Lubrication BM3Carichi radiali Radial loads BM3Rapporti Ratios BM3Dati tecnici Technical data BM4Dimensioni Dimensions BM6
Questa sezione annulla e sostituisce ogni precedente edizione o revi-sione. Qualora questa sezione non Vi sia giunta in distribuzione con-trollata, l’aggiornamento dei dati ivi contenuto non è assicurato. In tal caso la versione più aggiornata è disponibile sul nostro sito inter-net www.transtecno.com
This section replaces any previous edition and revision. If you obtained this catalogue other than through controlled distribution channels, the most up to date content is not guaranteed. In this case the latest ver-sion is available on our web site www.transtecno.com
Motoriduttori CC combinatiDC Double reduction gearmotors
NDWMPECWMP
B-M2
Caratteristiche tecniche Technical features
L’accoppiamento di un riduttore a vite senza fine con un ridutto-re epicicloidale consente di ottenere elevati rapporti di riduzione (imax = 1/18452) e di disporre di un gruppo autolubrificato compat-to, silenzioso e con un’elevata affidabilità.
The coupling of a wormgearbox to a planetary gearbox allows to obtain high reduction ratios (imax = 1/18452) and to get a compact, silent, self lubricated with high reliability group.
MOTORIDUTTORE / GEARMOTOR
ECWMP 070/026/52 2 CD 90 405 240 BRTipoType
GrandezzaSize
Numero stadi epicicloidale
Planetary stages number
Versione RiduttoreGearbox Version
Flangia UscitaOutput flange
RapportoRatio
Versione MotoreMotor
Version
OpzioniOptions
ECWMP 070/026/52070/026/62
100/026/52100/026/62
180/026/62 1 2
3
US
UD
CS
CD
80
90
105
120
Vedere tabella
See tables
12024024E
BRBRL
Designazione Classification
Versioni Versions
US CS CDUD
Simbologia
n1 [min-1] Velocità in ingresso / Input speed
n2 [min-1] Velocità in uscita / Output speed
i Rapporto di riduzione / Ratio
P1 [kW] Potenza in entrata / Input power
Mn [Nm] Coppia nominale in uscita del riduttore / Maximum output torque of the gearbox
M2 [Nm] Coppia in uscita in funzione di P1 / Output torque referred to P1
sf Fattore di servizio / Service factor
Rd % Rendimento dinamico / Dynamic efficiency
A2 N] Carico assiale ammissibile in uscita / Permitted output axial load
R2 [N] Carico radiale ammissibile in uscita / Permitted output radial load
Symbols
MOTORIDUTTORE / GEARMOTOR
NDWMP 120/026/52 2 CD 90 405 240 BRTipoType
GrandezzaSize
Numero stadi epicicloidalePlanetary stages number
Versione RiduttoreGearbox Version
Flangia UscitaOutput flange
RapportoRatio
Versione MotoreMotor Version
OpzioniOptions
NDWMP 120/026/52
120/026/62
180/026/62 1 2
3
US
UD
CS
CD
80
90
105
120
Vedere tabellaSee tables
120240
BRBRL
Motoriduttori CC combinatiDC Double reduction gearmotors
NDWMPECWMP
B-M3
DC
Carichi radiali Radial loads
Numero di stadiStages number
Carichi Radiali R2 [N]Radial Load R2 [N]
P52 P62 P811 200 240 4002 320 360 6003 450 520 1000
Numero di stadiStages number
Carichi Assiali A2 [N]Axial Load A2 [N]
P52 P62 P811 60 70 802 100 100 1203 150 150 200
2
Lubrificazione Lubrication
I riduttori a vite senza fine della serie CM sono lubrificati a vita con olio sintetico di viscosità 320 e possono essere installati in qualunque posizione di montaggio.
I riduttori epicicloidali sono lubrificati in modo permanente, non richiedono quindi ulteriore manutenzione. Questo gli consente di essere installati praticamente ovunque.
Permanent synthetic oil long-life lubrication allow to use CM wormgearbox range in all mounting position.
Planetary gearboxes are life-time lubricated with grease, therefore they are maintenancie free.They can be installed in any location.
MotoriduttoreGearmotor
Numero stadi epicicloidalePlanetary stages number
Rapporto epicicloidale Planetary ratio
Rapporto vite senza fineWormgearbox ratio
Rapporto finaleTotal ratio
.../026/052
.../026/062
1 6.75
10 67.515 101.320 13530 202.540 27050 337.560 405
225.01
10 250.115 375.1520 500.230 750.340 1000.450 1250.560 1500.6
45.56 60 2734
Rapporti Ratios
Motoriduttori CC combinatiDC Double reduction gearmotors NDWMP
B-M4
Technical data for S2 dutyDati tecnici per servizio S2
160(3000 min-1) 44.4 22.8 1.1 67.5 120/026/521 120/240
29.6 25.0 1.0 101.322.2 25.0 1.0 13514.8 25.0 1.0 202.511.1 25.0 1.0 2708.9 25.0 1.0 337.57.4 25.0 1.0 405
12.0 25.0 1.0 250.1 120/026/522 120/2408.0 25.0 1.0 375.156.0 25.0 1.0 500.24.0 25.0 1.0 750.33.0 25.0 1.0 1000.42.4 25.0 1.0 1250.52.0 25.0 1.0 1500.61.1 25.0 1.0 2734
44.4 23 1.7 67.5 120/026/621 120/24029.6 34 1.2 101.322.2 40 1.0 135.014.8 40 1.0 202.511.1 40 1.0 270.08.9 40 1.0 337.57.4 40 1.0 405.0
12.0 50.0 1.0 250.1 120/026/622 120/2408.0 50.0 1.0 375.156.0 50.0 1.0 500.24.0 50.0 1.0 750.33.0 50.0 1.0 1000.42.4 50.0 1.0 1250.52.0 50.0 1.0 1500.61.1 50.0 1.0 2734
P1[W]
n2[min-1]
M2[Nm]
sf i Versione motoreMotor version
250(3000 min-1) 44.4 25.0 1.0 67.5 180/026/521 120/240
44.4 35.7 1.1 67.5 180/026/621 120/24029.6 40.0 1.0 101.3
P1[W]
n2[min-1]
M2[Nm]
sf i Versione motoreMotor version
Nota: Verificare sempre che la coppia M2 utilizzata non ecceda il valore indicato nelle caselle in grigio
Note: Please check that the output torque M2 does not exceed the value into the grey areas
NDWMP
Motoriduttori CC combinatiDC Double reduction gearmotors ECWMP
B-M5
DC
Technical data for S2 dutyDati tecnici per servizio S2
100(3000 min-1) 44.4 14 1.8 67.5 070/026/521 120/240
29.6 21 1.2 101.322.2 25 1.0 135.014.8 25 1.0 202.511.1 25 1.0 270.08.9 25 1.0 337.57.4 25 1.0 405
12.0 25.0 1.0 250.1 070/026/522 120/2408.0 25.0 1.0 375.156.0 25.0 1.0 500.24.0 25.0 1.0 750.33.0 25.0 1.0 1000.42.4 25.0 1.0 1250.52.0 25.0 1.0 1500.61.1 25.0 1.0 2734
44.4 14.3 2.8 67.5 070/026/621 120/24029.6 20.1 2.0 101.322.2 25.4 1.6 13514.8 34.0 1.2 202.511.1 40.0 1.0 2708.9 40.0 1.0 337.57.4 40.0 1.0 405
12.0 50.0 1.0 250.1 070/026/622 120/2408.0 50.0 1.0 375.156.0 50.0 1.0 500.24.0 50.0 1.0 750.33.0 50.0 1.0 1000.42.4 50.0 1.0 1250.52.0 50.0 1.0 1500.61.1 50.0 1.0 2734
P1[W]
n2[min-1]
M2[Nm]
sf i Versione motoreMotor version
140(3000 min-1) 44.4 20 1.3 67.5 100/026/521 120/240/24E
29.6 25 1.0 101.3
44.4 20 2.0 67.5 100/026/621 120/240/24E29.6 29 1.4 101.322.2 37 1.1 135.014.8 40 1.0 202.5
250(3000 min-1) 44.4 25.0 1.0 67.5 180/026/521 120/240
44.4 37 1.1 67.5 180/026/621 120/24029.6 40 1.0 101.322.2 40 1.0 135.0
P1[W]
n2[min-1]
M2[Nm]
sf i Versione motoreMotor version
Nota: Verificare sempre che la coppia M2 utilizzata non ecceda il valore indicato nelle caselle in grigio
Note: Please check that the output torque M2 does not exceed the value into the grey areas
ECWMP
Motoriduttori CC combinatiDC Double reduction gearmotors
NDWMPECWMP
B-M6
DimensionsDimensioni
NDWMP120/026/52...U
NDWMP120/026/62...U
10.5
0
0
40
70
M5x10
34
49
26
5
12 h
7
4.225 88.5102.5
20.8
3
M4x10DIN 332
32 h
9
52
Linguetta 4x4x16DIN 6885Key 4x4x16DIN 6885
(WMP026/522)
(WMP026/521)35 48 112
8
2.5
10
90
10
.1
49
.5
6
1.5
-0.0
08
0
-0.5
-0.0
5
A65
21 30
17
15.75
2xM32xM2.5
2xM1.6
Vista da A
View from A
L= 1000 mm
10.5
A M5x12.5DIN 332
Linguetta 5x5x18DIN 6885Key 5x5x18DIN 6885
52
70
M5x10
34
49
26
5
14 h
7
925 88.5104.5
30
5
40 h
9
62
(WMP026/622)
(WMP026/621)35 48
8
112 2.5
10
90
10
.1
49
.5
6
1.5
-0.0
08
0
-0.5
-0.0
5
65
21 30
17
15.75
2xM32xM2.5
2xM1.6
Vista da A
View from A
0
0
L= 1000 mm
BM11
NDWMP120/026/52...C
BM11
NDWMP120/026/62...C
BA9Encoder
Freno / Brake BA9
BA9Encoder
Freno / Brake BA9
II 6
CL026
II 6
CL026
Motoriduttori CC combinatiDC Double reduction gearmotors
NDWMPECWMP
B-M7
DC
NDWMP180/026/62...U
10
.5
A
52
70
M5x10
34
49
26
5
14
h7
925 88.5104.5
30
5
40
h9
62
(WMP026/622)
(WMP026/621)35 48
8
130 2.5
10
90
10
.1
49
.5
6
1.5
-0.0
08
0
-0.5
-0.0
5
65
21 30
17
15.75
2xM32xM2.5
2xM1.6
Vista da A
View from A0
0
L= 1000 mm
BM11
NDWMP180/026/62...C
DimensionsDimensioni
BA9Encoder
Freno / Brake BA9
II 6
CL026
Motoriduttori CC combinatiDC Double reduction gearmotors ECWMP
B-M8
DimensionsDimensioni
ECWMP070/026/52...U
ECWMP070/026/62...U
L= 1000 mm
40
70
M5x10
34
49
26
5
12
h7
4.225 88.5102.5
20.8
3
M4x10DIN 332
32
h9
52
Linguetta 4x4x16DIN 6885Key 4x4x16DIN 6885
(WMP026/522)
(WMP026/521)35 47.5 130
8
65
2xM1.6
30
17
2xM315.75
2xM2.5
10.5
21
10 ÷0.5
60 -0
.008
A
AVista / View
L= 1000 mm
130
8
65
10 ÷0.5
60 -0
.008
A
2xM1.6
30
17
2xM315.75
2xM2.5
10.5
21
AVista / View
M5x12.5DIN 332
Linguetta 5x5x18DIN 6885Key 5x5x18DIN 6885
52
70
M5x10
34
49
26
5
14
h7
925 88.5104.5
30
5
40
h9
62
(WMP026/622)
(WMP026/621)35 47.5
BM11
ECWMP070/026/62...C
BM11
ECWMP070/026/52...C
BB24Encoder
Freno / Brake BB23
BB24Encoder
Freno / Brake BB23
Motori / Motors IP66 BC2
Motori / Motors IP66 BC2
II 6
CL026
II 6
CL026
Motoriduttori CC combinatiDC Double reduction gearmotors ECWMP
B-M9
DC
DimensionsDimensioni
ECWMP100/026/52...U
153
10
49.5
2.5 1.5
0-
0.0
08
0-
0.0
5
0-
0.56 10.1
EC100.24E
L= 1000 mm
40
70
M5x10
34
49
26
5
12
h7
4.225 88.5102.5
20.8
3
M4x10DIN 332
32
h9
52
Linguetta 4x4x16DIN 6885Key 4x4x16DIN 6885
(WMP026/522)
(WMP026/521)35 47.5
41 4
153
81
BM11
ECWMP100/026/52...C BM11
ECWMP100/026/62...U
153
10
49.5
2.5 1.5
0-
0.0
08
0-
0.0
5
0-
0.56 10.1
EC100.24E
L= 1000 mm
M5x12.5DIN 332
Linguetta 5x5x18DIN 6885Key 5x5x18DIN 6885
52
70
M5x10
34
49
26
51
4 h
7
925 88.5104.5
30
5
40
h9
62
(WMP026/622)
(WMP026/621)35 47.5
41 4
153
81
BM11
ECWMP100/026/62...C BM11
BB24Encoder
Freno / Brake BB23
BB24Encoder
Freno / Brake BB23
Motori / Motors IP66 BC4
Motori / Motors IP66 BC4
II 6
CL026
II 6
CL026
Motoriduttori CC combinatiDC Double reduction gearmotors ECWMP
B-M10
DimensionsDimensioni
ECWMP180/026/62...U
BM11
ECWMP180/026/62...C
L= 1000 mm
M5x12.5DIN 332
Linguetta 5x5x18DIN 6885Key 5x5x18DIN 6885
40
70
M5x10
3449
26
5
14 h
7
925 88.5104.5
30
5
40 h
9
62
(WMP026/622)
(WMP026/621)35 47.5
41 4
185
81
52
BB24Encoder
Freno / Brake BB23
Motori / Motors IP66 BC6
II 6
CL026
Motoriduttori CC combinatiDC Double reduction gearmotors
NDWMPECWMP
B-M11
DC
NDWMP.../.../... C... - ECWMP.../.../... C... Flange uscita / Output flanges
f2
c2
b2
s2
e2
a2
Dimensioni / Dimensions
P a2 b2 c2 e2 f2 s2 Flangia uscitaOutput flange
52
80 50 j7 9 65 2.5 M5 C8090 60 j7 9 75 2.5 5.5 C90105 70 j7 9 85 2.5 6.5 C105120 80 j7 9 100 3.0 6.5 C120
62
80 50 j7 9 65 2.5 M5 C8090 60 j7 9 75 2.5 5.5 C90105 70 j7 9 85 2.5 6.5 C105120 80 j7 9 100 3.0 6.5 C120
DimensionsDimensioni
ECWMP100.24EECWMP180.24E
21
L=1000mm
10.5
2xM3
2xM1.6
2xM2.5
15.75
30
49.5
10.1
6
17
0
-0.0
08 0
-0.0
5
0
-0.5
2.5 1.5
10
20
19
brand of
small but strong
brand of
CATM
INI0
119
www.transtecno.com
HANGZHOU TRANSTECNO POWERTRANSMISSIONS CO LTDNo.4 Xiuyan Road Fengdu Industry ZonePingyao Town Yuhang DistrictHangzhou City, Zhejiang Province311115 – CHINAT +86 571 86 92 02 60F +86 571 86 92 18 [email protected]
MA TRANSTECNO S.A.P.I. DE C.V. Av. Mundial # 176, Parque Industrial JM Apodaca, Nuevo León, C.P. 66600 MÉXICOT +52 [email protected]
TRANSTECNO SRLVia Caduti di Sabbiuno, 11/D-E40011 Anzola dell’Emilia (BO) ITALYT+39 051 64 25 811F +39 051 73 49 [email protected]
SALES OFFICE OCEANIA44 Northview drive, Sunshine west 3020 Victoria - AUSTRALIA Ph +61 03 9312 4722Fax +61 03 9312 4714Mobile: +61 [email protected] www.transtecno.com.au
SALES OFFICE SOUTH KOREAD-304 Songdo BRC Smart Valley 30, Songdomirae-ro, Yeonsu-gu, Incheon, 406-840 - KOREATel: +82 70 8288 2107Fax: +82 32 815 2107Mobile: +82 10 5094 [email protected]
SALES OFFICE FRANCETel: +33 (0) 6 85 12 09 87Fax-Italy: +39 051 73 49 [email protected]
SALES OFFICE INDIAA/10, Anagha, S.N. Road, Mulund (W) Mumbai 400080 - INDIATel: +91 9820614698Fax-Italy: +39 051 73 49 [email protected]
SALES OFFICE BRAZILRua Dr. Freire Alemão 155 / 402 - CEP. 90450-060Auxiliadora Porto Alegre RS - BRAZILTel: +55 51 3251 5447Fax: +55 51 3251 5447Mobile: +55 51 811 45 [email protected]
TRANSTECNO B.V. Ind. terrein Wieken/Vinkenhoef De Stuwdam,433815 KM Amersfoort - NETHERLANDSTel: +31(0) 33 45 19 505Fax: +31(0) 33 45 19 [email protected] www.transtecno.nl
TRANSTECNO AANDRIJFTECHNIEK B.V.De Stuwdam 433815 KM Amersfoort - NETHERLANDSTel: +31 (0) 33 20 4 7 006info@transtecnoaandrijftechniek.nlwww.transtecnoaandrijftechniek.nl
TRANSTECNO U.S.A. LLC5440 S.W. 156th Place Miami, FL 33185 - USATel: +1 (305) 220-4423 Fax: +1 (305) [email protected]
TRANSTECNO IBÉRICATHE MODULAR GEARMOTOR, S.A.C/Enginy, 2 Nave 6 - 08850 Gavà (Barcelona) - SPAINTel: +34 931 598 [email protected]