makeathon 2.0 2 october 2021, skill development and
TRANSCRIPT
Makeathon 2.0
2nd
October 2021, skill development and incubation centre
Jawaharlal Nehru Technological University Anantapur
Position Prize
amount in
Rupees
Team ID Title
Winner 10,000 35 Smart Garbage Sustentation System
Runner 8000 44 Piezo Electricity Power Generation
3 6000 27 Automation of Grievance Registration
4 3000 51 Weaponbot
5 3000 53 Electric scooter with automatic charging
system
6 3000 4 BRAZO
7 3000 18 Smart IOT sprinkler
8 3000 30 SELF healing Concrete
Secured: 1stPrize
Title of the Project: SMART GARBAGE SUSTENTAION SYSTEM
Team Members:
M.MaheshSwamy-18BF1A0265
R.Bhavya Chowdhary-18BF1A0285
N.Saini-18BF1A0273
T.Shakthi Chaitanya -18BF1A02A4
Abstract:
In recent years collection and segregation of waste is the main challenge faced worldwide due
to improper waste management. So, an autonomous low-cost compact device provides collection,
detection, segregation and management of solid waste. Our smart garbage system consists of sensors,
thermo electric generator, GSM module using IOT interface, microcontroller.
Based on trash type the components are separated using sensors. The GSM module is built to
show the status through IOT interface to the concern person. The total mechanism divided in to four
phases. In Phase one the garbage is collected and in phase two by using different sensors we
segregate the garbage or trash. Here metallic waste, plastic, glass, wet waste is separated. In phase
three we detect the level of the garbage and by using the GSM module we can send the alert signals
when the garbage levels are full in the bins. In Phase four by using collected garbage, can generate
the electricity by using the thermo electric generator and finally these components are integrated in
portable kit.
It is commercially feasible and can be used in public places like office buildings, schools,
stores, apartments; industries etc. can add the features according to future demand.
Fabrication cost of the product is Rs18, 000.
Title of the Project: PIEZOELECTRICITY POWER GENERATION
Team Members: Secured: 2nd
Prize
U.Jagadeesh
19001D3208
M.TECH(Energy Systems)
Abstract:
Due to energy crisis and shortfall of electricity in our country,
conventional sources are unable to fulfil the domestic requirements and the alternatives used
in the form of generators which create smoke and noise pollution. Harvesting mechanical
energy from human movement is an appropriate approach for acquiring environment-friendly
electrical energy. Common energy generation methods are pressure, heat and vibration. This
technology is based on a principle called the piezoelectric effect, in which certain materials
have the ability to build up an electrical charge from having pressure and strain applied to
them. Piezoelectricity refers to the ability of some materials to generate an electric potential
in response to applied pressure.
The system generates direct current using piezoelectric sensors (DC). The system uses
a non-conventional method to generate electrical power by using piezoelectric sensors to
detect footsteps, and the energy from the piezoelectric sensors is used to charge the battery.
This battery power is used to charge mobile phones and power automatic street lights. This
DC voltage is converted to AC voltage for AC loads using an inverter. Using this method, we
were able to use piezo energy to power both AC and DC loads.
Title of the Project: Automation of Grievance Registration
Team Members: Secured: 3rd
Prize
G Sidharth
T R Abijeeth Vasra
M Arun Kalyan
Abstract:
The existing public grievance management in our country involves a lot of
manual labour and there exist a lot of perplexities in finding the appropriate category of
grievance it belongs to and in ensuring the originality of the grievance itself. Our project is
to reduce the complexity of classifying the grievances in an automated way by using image
classification and to make it more compatible by implementing the Machine Learning
classifier module in an android mobile application.
To develop a mobile application that uses
deep learning (Image Classification) module and maps to classify the grievance and fetch
the user location and upload to corresponding department and to provide data visualization.
Title of the Project: WEAPONOBOT
Secured: 4th
Prize
Team members:
K. Vamsikrishna- 18BF1A0348
B.Jyothi Krishna Prakash- 18BF1A0309
K. JyothiSwaroop-18BF1A0344
D.Munilokesh-18BF1A0317
K. Vishnu Vardhan -18BF1A0347
ABSTRACT
In the recent times, new technologies are replacing human effort with robots. The idea to
replace the armed military, in the regions where the geographical and climatical conditions are
difficult to deploy the military, is a high demanding area of research in theseregions, there is a
chance of sudden invasion of enemies, in this situation “WEAPONOBOT” can act as a surveillance
system with the advanced features of on-board camera, rescue operation, and respond against the
enemies.
“WEAPONOBOT” is an Unmanned Ground Vehicle (UGV) that is compatible with all-terrain
and combat regions. It can be controlled remotely far from the base control station. The real-time
parameters from the robot surrounding such as status of the robot, and the live feed can be transferred
to the base control. This robot (UGV) can be operated with the help of a remote system from a
nearby base station and the data is transferred by using telemetry.
This robot is robust andis capable of carrying injured soldiers It's assembly/disassembly can
be done easily within short period of time and embedding of electronics/hardware is simple.
The fabrication cost of this robot is approximately 50 thousand rupees.
Title of the Project: Electric scooter with automatic charging system
Team Members: Secured: 5th
Prize
SHAIK MAHAMMAD SUHEL(184G5A0314)
K VAMSI KRISHNA(174G1A03A9)
S RASOOL BASHA(174G1A0371)
Abstract:
Project is electric scooter with automatic charging system its aim is to increase
the efficiency of the electric bikes. To increase the efficiency added a hub dynamo in the
front wheel of the bike, while running the bike hub dynamo helps to converts the rotational
energy into electrical energy and it is transfer to battery.
Main objective of the project is to increase the “efficiency” of
bike and to provide an alternate solution for fuel problem and to reduce the pollution
caused by the non conventional fuels.
Title of the Project: BRAZO
Team Members: Secured: 6th
Prize
C.V.S Dhakshith
K.Charitha sree pillai
T.S.Afan
M.Bhavagna
E.Gayathri
Abstract:
Brazo is a robotic arm, moreover like a rover, which can perform basic operations. It
has 4 dof and mounted with wheels for mobility. The purpose of using robotic arm is reducing errors
and human efforts. Robotic arms are programmed to execute a specific task or job quickly and
efficiently. The main objective of the project is to build a wireless robot for basic application. It
improves production capacity.
Secured: 7th
Prize
Project Title : SMART IOT SPRINKLER
Team Members:
KambalaNitheesh Kumar - 18BF1A0547
DasarirajuSumanth - 18BF1A0531
K Jaffer Sadiq - 18BF1A0544
S A Balaji- 18BF1A05E2
About The Project:
The technology of IoT has the potential to be limitless. Advances to the industrial internet
will be accelerated through increased network agility, capacity to deploy, automate and secure
diverse use cases at hyper scale.
Smart IoT Sprinkler is IoT based water sprinkler that can be controlled with the help of a web
app. The project is equipped with a camera and will transmit the video feed to the web application so
that the user can view the environment in which the project is present. The project is implemented
using Raspberry Pi Zero, Python, Flask, HTML, CSS, Bootstrap, and Motor Drivers. The project can
be controlled by the user from anywhere.
Smart IoT Sprinkler is a multipurpose device that can be used as a surveillance device, animal
repellent with the help of a buzzer present on the device, maintaining the lawns, spraying pesticides,
etc. It can be used in agriculture as a pesticide sprinkling device.
Fabrication Cost of this product is: 10000Rs.
Title of the Project: Self healing Concrete
Team Members: Secured: 8th
Prize
Yelluru Sam Moses
Ralla Madhavi
Yandapalli Vijitha Reddy
Karanam Yashaswini
Abstract:
Self healing concrete is a concrete which has ability to repair its own cracks
autogenously. It possess natural autogenously healing properties……..it is also known as “bio
concrete ” or “bacterial concrete “it is specially made to increase the durability of concrete structure
by self healing action. Here comes the necessity of self healing concrete. Instead of using such
complex methods . We can use self healing concrete, which reduces the maintenance cost without
intervention of third person cracks gets healed itself , thereby no skilled labor is required. it increases
durability of concrete.