MemorandumMemorandum CCN Television LimitedCCN Television Limited

Transmission Supervisor’s OfficeTransmission Supervisor’s Office

To: Master Control Date: Fri 20th Mar 2015

Re: Maestro Split Sources CC: Stu.M. Jeffrey Birjoo

The following are the procedures for splitting audio and video on the Maestro.

1) Pre-set the video source that you want to use.

2) Next on source control hold down the audio button.

3) At the same time select the source on pre-set for the audio that you want to use.

4) Both buttons should now be lit up on pre-set. One for the video and the other for the audio.

5) Check the audio and video before placing on air.

6) Use the pre-roll transition button to place the source on air.

Any operator who is not sure about these procedures or needs clarification can ask me for advice. Please be guided accordingly.

……………………………………..PAUL GOKOOL