logix 5000 produced and consumed tags programming manual

Download Logix 5000 Produced and Consumed Tags Programming Manual

Post on 06-Jan-2017

215 views

Category:

Documents

3 download

Embed Size (px)

TRANSCRIPT

  • Programming Manual

    Logix 5000 Produced and Consumed Tags 1756 ControlLogix, 1756 GuardLogix, 1769 CompactLogix, 1769 Compact GuardLogix, 1789 SoftLogix, 5069 CompactLogix, Studio 5000 Logix Emulate

  • Important user information

    Read this document and the documents listed in the additional resources section about installation, configuration, and operation of this equipment before you install, configure, operate, or maintain this product. Users are required to familiarize themselves with installation and wiring instructions in addition to requirements of all applicable codes, laws, and standards.

    Activities including installation, adjustments, putting into service, use, assembly, disassembly, and maintenance are required to be carried out by suitably trained personnel in accordance with applicable code of practice. If this equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired.

    In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from the use or application of this equipment.

    The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and requirements associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or liability for actual use based on the examples and diagrams.

    No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or software described in this manual.

    Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation, Inc., is prohibited.

    Throughout this manual, when necessary, we use notes to make you aware of safety considerations.

    WARNING: Identifies information about practices or circumstances that can cause an explosion in a hazardous environment, which may lead to personal injury or death, property damage, or economic loss.

    ATTENTION: Identifies information about practices or circumstances that can lead to personal injury or death, property damage, or economic loss. Attentions help you identify a hazard, avoid a hazard, and recognize the consequence

    Important: Identifies information that is critical for successful application and understanding of the product.

    Labels may also be on or inside the equipment to provide specific precautions.

    SHOCK HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that dangerous voltage may be present.

    BURN HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that surfaces may reach dangerous temperatures.

    ARC FLASH HAZARD: Labels may be on or inside the equipment, for example, a motor control center, to alert people to potential Arc Flash. Arc Flash will cause severe injury or death. Wear proper Personal Protective Equipment (PPE). Follow ALL Regulatory requirements for safe work practices and for Personal Protective Equipment (PPE).

    Allen-Bradley, Rockwell Software, Rockwell Automation, and TechConnect are trademarks of Rockwell Automation, Inc.

    Trademarks not belonging to Rockwell Automation are property of their respective companies.

  • Rockwell Automation Publication 1756-PM011I-EN-P - December 2016 3

    Summary of Changes

    This manual contains new and updated information. This table contains the changes made to this revision.

    Summary of Changes Topics

    Updated information on controller models that support produced and consumed tags.

    Controllers and networks that support produced/consumed tags on page 11

  • Rockwell Automation Publication 1756-PM011I-EN-P - December 2016 5

    Table of contents

    Studio 5000 environment.................................................................................................... 7 Additional Resources ............................................................................................................ 8 Legal notices ........................................................................................................................... 8

    Chapter 1

    Introduction ........................................................................................................................ 11 Controllers and networks that support produced/consumed tags .......................... 11 Connection requirements of a produced or consumed tag........................................ 12 Considerations when migrating projects that contain multicast produce tags ..... 13 Organize tags for produced or consumed data ............................................................. 14

    Adjust for bandwidth limitations ........................................................................... 15 Produce a tag ....................................................................................................................... 15 Create a consumer tag ....................................................................................................... 17

    Additional steps for a PLC-5C controller ............................................................. 21 RPI limitations and negotiated default .......................................................................... 22 Set RPI limits, default for producer tag ......................................................................... 24

    Unicast connection options ..................................................................................... 26 Set up the consumer tag .................................................................................................... 26 Verify consumed tag acceptance ...................................................................................... 27 Produced and consumed RPI scenarios ......................................................................... 30

    Scenario 1 ..................................................................................................................... 30 Scenario 2 ..................................................................................................................... 31 Scenario 3 ..................................................................................................................... 32 Scenario 4 ..................................................................................................................... 33

    1769-L2x and 1769-L3x RPI limits ................................................................................ 33 RPI I/O faults ..................................................................................................................... 35

    Chapter 2

    Introduction ........................................................................................................................ 37 Produce a large array .......................................................................................................... 38

    Preface

    Produce and Consume a Tag

    Produce a Large Array

    Index

  • Rockwell Automation Publication 1756-PM011I-EN-P - December 2016 7

    Preface

    This manual details how, with a Logix5000 controller, to produce and consume system-shared tags and produce a large array. This manual is one of a set of related manuals that show common procedures for programming and operating Logix5000 controllers.

    For a complete list of common procedures manuals, refer to the Logix5000 Controllers Common Procedures Programming Manual, publication 1756-PM001.

    The term Logix5000 controller refers to any controller that is based on the Logix5000 operating system.

    The Studio 5000 Automation Engineering & Design Environment combines engineering and design elements into a common environment. The first element is the Studio 5000 Logix Designer application. The Logix Designer application is the rebranding of RSLogix 5000 software and will continue to be the product to program Logix5000 controllers for discrete, process, batch, motion, safety, and drive-based solutions.

    The Studio 5000 environment is the foundation for the future of Rockwell Automation engineering design tools and capabilities. The Studio 5000 environment is the one place for design engineers to develop all elements of their control system.

    Studio 5000 environment

    http://literature.rockwellautomation.com/idc/groups/literature/documents/pm/1756-pm001_-en-e.pdfhttp://literature.rockwellautomation.com/idc/groups/literature/documents/pm/1756-pm001_-en-e.pdfhttp://literature.rockwellautomation.com/idc/groups/literature/documents/pm/1756-pm001_-en-e.pdfhttp://literature.rockwellautomation.com/idc/groups/literature/documents/pm/1756-pm001_-en-e.pdf

  • Preface

    8 Rockwell Automation Publication 1756-PM011I-EN-P - December 2016

    These documents contain additional information concerning related Rockwell Automation products.

    Resource Description

    Replacement Guidelines: Logix5000 Controllers Reference Manual, publication 1756-RM100

    Provides guidelines for migrating projects from ControlLogix 5560/5570 controllers to ControlLogix 5580 controllers, and from CompactLogix 5370 controllers to CompactLogix 5380 controllers.

    Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1

    Provides general guidelines for installing a Rockwell Automation industrial system.

    Product Certifications webpage, available at http://ab.rockwellautomation.com

    Provides declarations of conformity, certificates, and other certification details.

    You can view or download publications at http://www.rockwellautomation.com/literature. To order paper copies of techni