leaflet sie2015 19012015 v3vsb

2
INDUSTRIAL ENGINEERING DEPARTMENT, FACULTY OF MECHANICAL ENGINEERING, UNIVERSITY OF BELGRADE, SERBIA & STEINBEIS ADVANCED RISK TECHNOLOGIES, STUTTGART, GERMANY & INNОVATION CENTER OF THE FACULTY OF MECHANICAL ENGINEERING, UNIVERSITY OF BELGRADE 6 th INTERNATIONAL SYMPOSIUM ON INDUSTRIAL ENGINEERING Sponsor MESTDRS - Ministry of Education, Science and Technological Development of the Republic of Serbia Milanović D. Dragan, FME, Belgrade, Serbia, Chairperson; Jovanović Aleksandar, Stuttgart University, Stuttgart, Germany, Chairperson; Babić Bojan, FME, BU (SRB); Spasojević-Brkić Vesna, FME, BU (SRB); Buchmeister Borut, University of Maribor (SLO); Bugarić Uglješa, FME, BU (SRB); Casadesus Marti, Universidad de Girona (ESP); Csetverikov Dmitrij,Hungarian Academy of Sciences, Institute for Computer Science and Control (HUN); Cvijanović Janko, Ekonomski institut, Beograd, (SRB); Dondur Nikola, FME, BU (SRB); Dźwiarek Marek, Central Institute for Labour Protection – National Research Institute (POL); Engh Erik, HCR (NOR); Filipović Jovan, FOS, BU (SRB); Grozdanović Miroljub, Faculty of Occupational Safety, Nis (SRB); Karapetrovic Stanislav, University of Alberta (CAN); Klarin Milivoj, TF "Mihajlo Pupin", UNS (SRB); Kreiner Jesa, California State Universitiy, Fullerton (USA); Lalić Bojan, FTS, UNS (SRB); Lisjak Dragutin, Polytechnic of Zagreb (HRV); Lučanin Vojkan, FME, BU (SRB); Majstorović Vidosav, FME, BU (SRB); Milanović Lj. Dragan, FME, BU (SRB); Milazzo Francesca Maria, UM (ITA); Milovančević Milorad, FME, BU (SRB); Minovski Robert, FME, Skoplje, (MKD); Misic Dimic Katarina, Aalto University, (FIN); Misita Mirjana, FME, BU (SRB); Spasojević-Brkić Vesna (PhD, Associate Professor, FME, Belgrade, Serbia, Chairperson) Misita Mirjana (PhD, Associate Professor, FME, Belgrade, Serbia), Josipović Sonja (ME, Assistant, FME, Belgrade, Serbia), Golubović Tamara (ME, Assistant, FME, Belgrade, Serbia) Organizing committee INFORMATION FOR AUTHORS Program committee SIE ORGANIZE 2015 Faculty of Mechanical Engineering, University of Belgrade 6th International Symposium of Industrial Engineering 24 th – 25 th September, 2015, Belgrade Topics Topics of the Symposium, cover, but are not limited to, industrial issues/applications and academic research: Decision Analysis and Methods E-Business and E-Commerce Engineering Economy and Cost Analysis Engineering Education and Training Enterprise Information Systems Engineering Economy Engineering Management Systems Facilities Planning and Management Global Manufacturing and Management Human Factors Intelligent Manufacturing Systems Inventory Management Logistics and Supply Chain Management Manufacturing Systems Operations Research Production Planning and Control Project Management Quality Control and Management Reliability and Maintenance Engineering Service Innovation and Management Systems Modelling and Simulation Operations Management Service Engineering Safety, Security and Risk Management FCTUNL, Lisbon (PRT); Petrović Dušan, FME, BU (SRB); Pokrajac Slobodan, FME, BU (SRB); Popović Predrag, Institute Vinča (SRB); Putnik Goran, Universidade de Minho, (PRT); Sajfert Zvonko, TF "Mihajlo Pupin", UNS (SRB); Shuman Ruter Teodora, Seattle University (USA); Uzunovic- Zaimovic Nermina, FME, Zenica (BIH); Valis David, UD (CZE); Váncza József, MTA SZTAKI (HUN); Veljković Zorica, FME, BU (SRB); Živković Živan, TFB, Bor (SRB); Žunjić Aleksandar, FME, BU (SRB); The final paper must be prepared in MS Word. Paper size is A4. Please, set left and right margin at 2.5 cm, bottom margin at 2 cm, top margin at 7 cm for first page and 3 cm for the other pages. Text should be in two columns, spacing 1 cm. Four pages are allowed for each paper. Additional page costs 20 €. Recommended font is Times New Roman. Title of the paper should be written in the centre of the page, in Times New Roman bold 13, uppercase. The names, affiliation and the institution of the authors should be written 3 spaces under title in Times New Roman 11. The abstract and the rest of the paper should be in two columns. Abstract should be written in Times New Roman Italic (max 150 words), followed by Key Words (max 6). Text should be written in Times New Roman 10. Single line spacing should be used. Main Headings should be in Times New Roman bold 10, uppercase. Secondary headings should be in Times New Roman bold 10, Sentence case. Do not insert page numbers. The official languages of the Symposium are English and Serbian. All papers have to be written in English. No more than 3 papers per author will be accepted. You should submit the final paper(s) online to the address http://ie.mas.bg.ac.rs/sie2015 The authors of suitable papers presented on the Symposium will be invited to extend the papers in order to publish them in Journal of Applied Engineering Science and FME Transactions, indexed in SCOPUS. All accepted papers will be published in the SIE2015 Proceedings. Abstracts of the presented papers will be published at http://ie.mas.bg.ac.rs shortly after the Symposium.

Upload: marko-brkic

Post on 30-Sep-2015

218 views

Category:

Documents


1 download

DESCRIPTION

sie2015

TRANSCRIPT

Slide 1

INDUSTRIAL ENGINEERING DEPARTMENT, FACULTY OF MECHANICAL ENGINEERING, UNIVERSITY OF BELGRADE, SERBIA&STEINBEIS ADVANCED RISK TECHNOLOGIES, STUTTGART, GERMANY&INNVATION CENTER OF THE FACULTY OF MECHANICAL ENGINEERING, UNIVERSITY OF BELGRADE6th INTERNATIONAL SYMPOSIUM ON INDUSTRIAL ENGINEERING

SponsorMESTDRS - Ministry of Education, Science and Technological Development ofthe Republic of SerbiaMilanovi D. Dragan, FME, Belgrade, Serbia, Chairperson; Jovanovi Aleksandar, Stuttgart University, Stuttgart, Germany, Chairperson; Babi Bojan, FME, BU (SRB); Spasojevi-Brki Vesna, FME, BU (SRB); Buchmeister Borut, University of Maribor (SLO); Bugari Ugljea, FME, BU (SRB); Casadesus Marti, Universidad de Girona (ESP); Csetverikov Dmitrij,Hungarian Academy of Sciences, Institute for Computer Science and Control (HUN); Cvijanovi Janko, Ekonomski institut, Beograd, (SRB); Dondur Nikola, FME, BU (SRB); Dwiarek Marek, Central Institute for Labour Protection National Research Institute (POL); Engh Erik, HCR (NOR);Filipovi Jovan, FOS, BU (SRB); Grozdanovi Miroljub, Faculty of Occupational Safety, Nis (SRB); Karapetrovic Stanislav, University of Alberta (CAN); Klarin Milivoj, TF "Mihajlo Pupin", UNS (SRB); Kreiner Jesa, California State Universitiy, Fullerton (USA); Lali Bojan, FTS, UNS (SRB); Lisjak Dragutin, Polytechnic of Zagreb (HRV); Luanin Vojkan, FME, BU (SRB);Majstorovi Vidosav, FME, BU (SRB); Milanovi Lj. Dragan, FME, BU (SRB); Milazzo Francesca Maria, UM (ITA); Milovanevi Milorad, FME, BU (SRB); Minovski Robert, FME, Skoplje, (MKD); Misic Dimic Katarina, Aalto University, (FIN); Misita Mirjana, FME, BU (SRB); Nunes Lopes Isabel, Spasojevi-Brki Vesna (PhD, Associate Professor, FME, Belgrade, Serbia, Chairperson)Misita Mirjana (PhD, Associate Professor, FME, Belgrade, Serbia),Josipovi Sonja (ME, Assistant, FME, Belgrade, Serbia),Golubovi Tamara (ME, Assistant, FME, Belgrade, Serbia)Organizing committeeINFORMATION FOR AUTHORSProgram committeeSIEORGANIZE2015

Faculty of Mechanical Engineering, University of Belgrade6th International Symposium of Industrial Engineering

24th 25th September, 2015, Belgrade

TopicsTopics of the Symposium, cover, but are not limited to, industrial issues/applications and academic research:Decision Analysis and Methods E-Business and E-Commerce Engineering Economy and Cost Analysis Engineering Education and Training Enterprise Information SystemsEngineering EconomyEngineering Management SystemsFacilities Planning and Management Global Manufacturing and Management Human Factors Intelligent Manufacturing Systems Inventory ManagementLogistics and Supply Chain Management Manufacturing Systems Operations Research Production Planning and Control Project Management Quality Control and Management Reliability and Maintenance EngineeringService Innovation and Management Systems Modelling and Simulation Operations ManagementService Engineering Safety, Security and Risk Management

FCTUNL, Lisbon (PRT); Petrovi Duan, FME, BU(SRB); Pokrajac Slobodan, FME, BU (SRB); Popovi Predrag, Institute Vina (SRB); Putnik Goran, Universidade de Minho, (PRT); Sajfert Zvonko, TF "Mihajlo Pupin", UNS (SRB); Shuman Ruter Teodora, Seattle University (USA); Uzunovic-Zaimovic Nermina, FME, Zenica (BIH); Valis David, UD (CZE); Vncza Jzsef, MTA SZTAKI (HUN); Veljkovi Zorica, FME, BU (SRB); ivkovi ivan, TFB, Bor (SRB); unji Aleksandar, FME, BU (SRB);The final paper must be prepared in MS Word. Paper size is A4. Please, set left and right margin at 2.5 cm, bottom margin at 2 cm, top margin at 7 cm for first page and 3 cm for the other pages. Text should be in two columns, spacing 1 cm. Four pages are allowed for each paper. Additional page costs 20 . Recommended font is Times New Roman. Title of the paper should be written in the centre of the page, in Times New Roman bold 13, uppercase. The names, affiliation and the institution of the authors should be written 3 spaces under title in Times New Roman 11. The abstract and the rest of the paper should be in two columns. Abstract should be written in Times New Roman Italic (max 150 words), followed by Key Words (max 6). Text should be written in Times New Roman 10. Single line spacing should be used. Main Headings should be in Times New Roman bold 10, uppercase. Secondary headings should be in Times New Roman bold 10, Sentence case. Do not insert page numbers. The official languages of the Symposium are English and Serbian. All papers have to be written in English. No more than 3 papers per author will be accepted. You should submit the final paper(s) online to the address http://ie.mas.bg.ac.rs/sie2015

The authors of suitable papers presented on the Symposium will be invited to extend the papers in order to publish them in Journal of Applied Engineering Science and FME Transactions, indexed in SCOPUS.All accepted papers will be published in the SIE2015 Proceedings. Abstracts of the presented papers will be published at http://ie.mas.bg.ac.rs shortly after the Symposium.

1

The Symposium SIE 2015 will be held at the Faculty of Mechanical Engineering (FME) in Belgrade. Preferential rates will be available for the hotels close to the FME.CONFERENCE SECRETARIAT:Faculty of Mechanical Engineering University of BelgradeKraljice Marije 16, 11120 Belgradee-mail: [email protected] Phone: +381631831325 and +381113302318http://ie.mas.bg.ac.rs http://ie.mas.bg.ac.rs/sie2015The aim of the 6th International Symposium of Industrial Engineering SIE 2015 is to contribute to a better comprehension of the role and importance of Industrial Engineering. The Symposium aims to provide a forum for academics, researchers and practitioners to exchange ideas and recent developments in the field of Industrial Engineering. The Symposium is also expected to foster networking, collaboration and joint effort among the conference participants to advance the theory and practice as well as to identify major trends in Industrial Engineering today. According to these goals the Symposium addresses to all experts in all fields of Industrial Engineering to make their contribution to success and show capabilities achieved in the work that has been done.Early registration fee is 120 until July 6th, after that date registration fee is 160 . For the registration fee payment please contact the Conference Secretariat. For Serbian residents registration is payable in dinars.

There are preferential rates for you in hotels Park and Excelsior close to the FME in Belgrade. Completely renovated in 2012 Hotel Park captivates with its modern style, clear and clean lines and interior full of warm colors. Its attractive location in the heart of the city surrounded by greenery provides isolation from noise and offers the same key elements as the real park does - rest, relaxation and peace.

The Hotel Excelsior is located in the very heart of Belgrade, opposite the City hall and Parliament. Surrounded by Pionirski and Tasmajdan Parks, it is within easy walking distance of the biggest city squares, clubs, old city Skadarlija and old fortress Kalemegdan. VenueAimDates and registration feesLocationBelgrade has a reputation for its nightlife, and with good reason. There isnt a day of the week in Belgrade when you cant have a night out. ThisAccomodation

is true regardless your age, lifestyle and financial status! A lot of nightclubs, bars and floating

walks, drinking their morning coffee or days off work. They like being in motion and therefore theriver clubs along the riverbanks make Belgrade nightlife some of the most exuberant in Europe. Belgrade is one of the oldest towns in Europe. It has a 7000-year-old history and the oldest archaeological findings date back to 5th millennium AD. More at http://www.beligrad.com/

May 15, 2015Deadline for paper and registration form submission online on http://ie.mas.bg.ac.rs/sie2015June 5, 2015 Notification of acceptationJune 5 - July 6, 2015Early Registration fee payment July 6 September 23, 2015Registration fee payment September 24-25, 2015SymposiumConference Activities

Belgrade, the capital of Serbia, is the third largest city in South-eastern Europe with around 1.700.000 people living in it. Belgrade is a city that is changing and developing at an accelerated pace. A city that welcomes everybody and leaves nobody indifferent. All citizens of Belgrade love to talk about the spirit of the city. Open and ever ready for fun, many Belgraders will claim to be true hedonists - and many of them really are - knowing all there is to know about good food, wine and music. The citizens of Belgrade like all sorts of things: pleasant conversations and long3) River cruise: 25/09/2015, 18-20h river. In an hour and a half you can enjoy wonderful views of one of the oldest cities in Europe, and learn about it while a tourist guide tells stories about Belgrade and rivers Danube and Sava, on which confluence city is situated.1) Welcome cocktail (coffee and refreshments), 24/09/2015, 11-12h : at the Teachers` club, room 210. 2) Conference Dinner: 24/09/2015, 19-23h : at the restaurant at the fifth floor of FME. The restaurant has great local food, and one of the best musicians andstreets, walkways, cafes and restaurants are always filled with people.singers in Serbia will bethere to makeyour evening unforgetable.In order to help you make most of your stay in our wonderful city, on Friday evening we will organize for you panoramic sightseeing from the

DON'T FORGET TO REGISTER IN HOTEL AS SIE2015 PARTICIPANT.2