launch interface ver1.02

8/3/2019 Launch Interface Ver1.02

1/25

Thank you for purchasing the Gizzmo launch Interface.This manual contains operating instructions andinstallation procedures that are needed for the fittingand operation of this product.

Instruction Manual

www.gizzmoelectronics.com


2/25

Gizzmo Electronics Ltd Warranties StatementGizzmo Electronics Limited

Limited Warranties Statement

Effective 1 January 2003

All products manufactured or distributed by Gizzmo

Electronics are subject to the following Limited Express

Warranties, and no others:

For a period of one year from and after the date of purchase

of a new Gizzmo Electronics product, Gizzmo Electronics

warranties and guarantees only to the original purchaser/userthat such a product will be free from defects of material and

workmanship in the manufacturing process. A product claimed

to be defective must be returned to place of purchase. Gizzmo

Electronics, at its sole option, shall replace the defective

product with a comparable new product or repair the defective

product. This express warranty shall be inapplicable to any

product not properly installed and properly used by the

purchaser/user or to any product damaged or impaired beexternal forces. This is the extent of Warranties available

on this product. Gizzmo Electronics shall have no liability

whatsoever for consequential damages following from the use

of any defective product or by reason the failure of any

product. Gizzmo Electronics specifically disclaims and

disavows all other warranties, express or implied including,

without limitation, all Warranties of fitness for a

particular purpose, Warranties of Description, Warranties of

Merchantability, Trade Usage or Warranties of Trade Usage.

The above warranty is valid to New Zealand only as Gizzmo

Electronics does not offer an international warranty.

1


3/25

Gizzmo launch Interface

Warnings: Incorrect installation can harm or damage the product. Gizzmo Electronics will not warranty any item that has

been damaged due to incorrect installation, or misuse of

product.

Never disassemble, modify, or tamper with unit. Failuremay cause injury or fire, and void warranty.

Gizzmo Launch Interface

The Gizzmo Launch Interface enhances the features of the

Gizzmo Tach Recall Shiftlight. The addition of the Gizzmo

Launch Interface enables the launch control function of

Gizzmo Tach Recall Shiftlight.

The launch control feature is operated using the Gizzmo TachRecall Shiftlight.

Key NoteUpon first attaching the launch controller, it will benecessary, after turning the key on and having allowed theTach Recall Shiftlight to finish its opening ceremony, pushthe rear button to switch the Gizzmo Launch Interface on.Having done this, go through the setting modes to enter thelaunch RPM setting. If the tacho is on zero, hold the TachRecalls rear button down for 1 to 1.5 minutes until the tachostarts decreasing from its highest point

2


4/25

Operating Instructions

The following operating instructions are an expanded version

of the Gizzmo Tach Recall instructions, with the GizzmoLaunch Interface settings and operations added.

1.Turn the ignition on, and start the engine running.2.Press and hold both the buttons for 2 seconds, once the

buttons are released the first stage shiftlight will

illuminate

3.Use the two buttons (up/down) to move the tacho needle tothe desired rpm for first stage.

4.Press and the hold both buttons for 2 seconds once more. Onreleasing the buttons the final stage shiftlight will

illuminate.

5.Use the two buttons (up/down) to move the tacho needle tothe desired rpm for the final stage.

6.Press and hold both the buttons for 2 seconds once more. Onreleasing the buttons the launch control light will

illuminate.

7.Use the two buttons (up/down) to move the tacho needle tothe desired launch rpm.

8.Once launch rpm is correct press both the buttons once more,the tacho will return to normal running mode. Shifts points

and launch rpm are now set.

3


5/25

Gizzmo Launch Interface Operation Notes.The launch rpm can only be set only if the launch controlis switched on. The launch control is switched on bypressing the rear button once. The tacho will then move,indicating the position of the current launch rpm, thecorresponding launch LEDs will flash. To turn off launchcontrol press the rear button once againWith the Launch Control on, the set launch rpm will bedisplayed in the start up ceremony when the ignition isswitched on.After altering the launch RPM, the ignition must beswitched off and restarted before the new setting will takeeffect.The launch features are not enabled until the Gizzmo TachRecall Shiftlight has finished its opening ceremony.

Installation Instructions

The Gizzmo Launch Interface will control up to six channels.

Determine the number channels required for your vehicle, then

follow the wiring instructions according to the number of

channels required.

NOTE: UNIT IS NOT WEATHER PROOF, INSTALL IN CABIN.Red - Computer Positive

Black - Computer Negative

Green - Igniter Trigger One ECU Side

Yellow - Igniter Trigger One Engine Side

Pink - Igniter Trigger Two ECU Side

Orange - Igniter Trigger Two Engine Side

Blue - Igniter Trigger Three ECU Side

Purple - Igniter Trigger Three Engine Side

4


6/25

Grey - Igniter Trigger Four ECU Side

Brown - Igniter Trigger Four Engine Side

Red/Blue - Igniter Trigger Five ECU Side

White/Brown - Igniter Trigger Five Engine Side

Yellow/Brown - Igniter Trigger Six ECU SideGreen/Brown - Igniter Trigger Six Engine Side

White - Com One

Connect Com One to Com One out of Gizzmo Tach Recall

Shiftlight

Key Installation Note: Igniter wires are cut and intercepted.eg. Green - Igniter Trigger One ECU SideYellow - Igniter Trigger One Engine Side

Means cut igniter trigger for coil one. Join cut ECU side of

wire to Green wire, then join cut engine side of trigger wire

to Yellow wire. The Gizzmo Launch Interface is wired in as an

interceptor.

Clutch SwitchOperation and InstallationThe Gizzmo Launch Interface utilises a reed switch to engage

and disengage the launch control function. The reed switch

needs to be fitted onto the clutch mechanism, one side

mounted on a fixed point, and the other moving with clutch

operation. Specific placement information is detailed in the

following text.

Function and PlacementWhen the switches are together (within 21mm) launch control

is disabled, meaning normal engine operation is possible. At

this point the clutch pedal should be completely disengaged.

5


7/25

To enable launch control the switches must move at approx.

25mm apart. At this point the circuit is broken and launch

control is activated. Launch control should be activating

when the clutch pedal is engaged.

Installation Notes

Launch control disabled = reed switches within 21mm of each

other

Launch control enabled = reed switches at least 26 mm apart

from each other

6


8/25

WARNINGLaunch control is high stress and high impact.The sudden release of energy may be too muchfor a vehicles gearbox and drive train.Exercise CAUTION and CARE when determining thesuitable launch rpm for your vehicle.If you have any questions consult a mechanicregarding the strength of your drive components.

Gizzmo Electronics Ltd will not be liable forany damage that may result from the use of thisproduct.

NOTEECU wiring information is supplied in thefollowing pages. The wiring information is aguideline only. On various makes and models ECUpin outs may differ from those illustrated. Aprofessional should carry out installation, andthe ECU pin out information should be checked.

7


9/25

gizzmoELECTRONICS

EP3

EK9

EK4

EG6

EG9

EJ1

CIVIC

Diagram

GH5

GH2

GH2

GH6

GH6

Year Notes

01.10~

97.6~98.8

95.8~98.8

91.9~95.8

93.2~00.8

K20A

B16A

Model EngineChassis

98.9~00.9 GH1

98.9~00.9 GH1

B16BTYPE R

B16A

B16A

DC5

DC2/DB8

BB6

INTEGRA

PRELUDE

GH5GH2

GH4

GH6

94.9~96.8

93.5~01.6

95.9~01.6K20A

93.5~95.8 GH6

96.12~98.9

91.9~96.10

B18C

B18C

B18C

Type R

M / T

A / T

BB8

BB4

H22A

H22A

GH2

EK3 D15B95.8~98.8

98.9~00.9

GH2

GH1

EG4 D15B

EF9 89.9~91.8

BB1 GH4

DA6 B16A 89.4~93.5

EJ8

EJ7

EJ6

EM1 si 99.2~00.9

D16Z 92.2~95.8

GH1

GH2

GH7

GH7

ECU Digram for HONDA

8


10/25

gizzmoELECTRONICS

DiagramYear NotesModel EngineChassis

EG2

CL1

CF3

CR-X

ACCORD/

TORNEO

GH6

GH3

00.6~02.9

D15B

H22A

F20B

92.3~95.10

89.9~92.2

00.6~02.11

F18B

GH1

GH6

EG1

EF8

B16A

B16A

CL3

CF4

97.9~00.6F20B

F22BCD5

NSX NA1 C30A 90.9~97.1

H22ACD693.9~97.8

GH1

CH9

CF6

00.6~02.10H23A

99.1~02.10

F23A

GH1

GH6

CL2

CF797.10~02.10

F22BCE1

F22ACB9

94.3~97.9

GH1ACCORDWAGON

91.3~94.2

ODYSSEY

RA1

RA2

RA3

RA4

RA5RA6

RA7F23A

J30A

F23A

F22B

99.12~

97.10~99.12

94.10~97.9

GH1

GH2

GH1

GH6

S2000 AP1 F20C 99.4~ GH1

GH7

ECU Digram for HONDA

9


11/25

gizzmoELECTRONICS

GH1

GH2

GH4

32p 25p 31p 16p

Power

Earth Ig1

Ig1

Power

Earth

32p 31p 16p

Ig1 Power

Earth

26p 22p16p 12p

GH3

Ig2

Power

Earth

Ig1 Ig6 Ig3

Ig4Ig5

26p 16p 22p12p

10


12/25

gizzmoELECTRONICS

GH5

GH7

31p 24p 17p22p

Ig1

Power

Earth Ig2Ig3Ig4

31p

Earth

Power Ig1

18p 16p20p

GH6

Caution: GH6 GH7Cut the igniter wires illustrated in the diagram. Joinboth the cut ECU side wires to the Green wire on theLaunch Interface. Join the remaining two engine sidecut wires to the Yellow wire on the Launch Interface.

Ig1 Power

Earth

26p 22p16p

11


13/25

gizzmoELECTRONICS

NB8C

NB6C

NA8C

ROADSTER

Diagram

GZ3

GZ3

GZ1

Year Notes

97.12~00.6

93.8~95.7

Model EngineChassis

97.12~00.6

BP-ZE

95.8~97.11 GZ2

89.9~93.7

B6-ZE

BP-ZE

BP-ZEH6-ZE GZ1NA6CE

FAMILIA BP-ZETBG8Z 89.8~94.3 GZ1

ECU Digram for MAZDA

12


14/25

gizzmoELECTRONICS

GZ1

GZ2

GZ326p 22p16p

Ig1 PowerEarth

Ig2

26p 22p

PowerEarth Ig1

Ig2

26p 16p 22p

Power

Earth

Ig2 Ig1

13


15/25

gizzmoELECTRONICS

CT9A

CT9A

CP9A

CN9A

CE9A

CD9A

LANCER

Diagram

GM6

GM2

Year Notes

03.1~05.2

98.1~01.1

93.12~96.7

92.10~93.11

4G63

4G63

4G63

Model EngineChassis

01.2~02.1

GM4

4G63 96.8~97.12

4G63

4G63

Z16A

DE3A

DE2A

EC5W

4G93

EC5ALEGNUM

GALLANT

GM1

GM3

GM1

GM5

GM3

GM7

96.2~97.11

94.10~96.1

4G63

4G93

90.10~99.8

94.10~96.1

6A12

96.2~97.2 GM4

96.8~02.796.8~00.5

87.10~92.4

92.5~00.5 GM2

GTO 6G72

FTO

E39A

6A136A13

CD5W

GM3

CT9A 05.3~4G63

CK4A

CM5A

CD5A

95.10~00.10

4G9391.10~95.9

4G92

GM16A12 92.5~96.7E84A

Libero

Mirage

CA4A

CJ4A

CM5A

4G92

4G93

91.10~95.9

95.10~00.5 GM4

GM2

MIVEC

MIVEC

MIVEC

GM2

GM4

MIVEC

MIVEC

97.2~00.7 GM1M/T

ECU Digram for MITSUBISHI

14


16/25

gizzmoELECTRONICS

F17A

EC1A

D32A

D33A

DIAMANTE

Diagram

GM3

GM4

Year Notes

95.1~95.12

98.8~00.4

95.9~99.84G63

Model EngineChassis

90.5~94.12 GM1

4G93

D53

GM8

GM901.2~05.9

ECLIPSE

6G72

F36A96.1~97.7

6G72

D39A

D22A

D53

89.7~91.104G63

91.10~95.9

4G64

A/T

GM2

MIVEC

MIVEC

EA1A

ASPIRE GM4

M/T

D27A

6G72

ECU Digram for MITSUBISHI

15


17/25

gizzmoELECTRONICS

GM1

GM2

GM3

GM4

26p 16p 22p

Ig1

Power

Earth

Ig2

Ig1

Ig2 Power Earth

Ig3

26p 16p 22p12p

Ig1

Ig2 Power

Earth

26p 16p 22p12p

26p 16p 22p

Ig1

Power EarthIg2

Ig3

16


18/25

gizzmoELECTRONICS

GM5

GM6

GM7

26p 16p 22p

Ig2

Ig1 Power

Earth26p 16p 22p12p

Ig1

PowerEarth

Ig2

PowerEarth

Ig1 Ig2

10p 18p 24p

GM8

26p 16p 22p

Ig1

PowerEarth

GM926p 22p

Ig1

Power Earth

16p

220 ? 1/4 W

RESISTOR220 ? 1/4 W

RESISTOR

17


19/25

gizzmoELECTRONICS

BNR34

ER34

BCR33

ECR33

BNR32

HCR32

CPV35

Z35

Z33

WGNC34

C34

A31

S15

S14

SKYKINE

LAUREL

CEFIRO

Diagram

GN3

GN3

GN3

GN3

GN8

GN8

GN2

GN3

GN7

GN3

GN5

GN4

GN1

Year Notes

99.1~01.4

95.1~98.12

93.8~94.12

89.8~94.12

03.1~

03.1~

97.11~99.8

91.1~92.1288.12~90.12

90.8~94.8

96.6~98.12

99.1~02.1

93.10~96.5

RB26DETT

SR20DET

SR20DET

SR20DE

Model EngineChassis

98.5~01.5 GN7

95.1~98.4GN3

88.5~93.7

89.7~02.6

96.9~01.2

97.6~99.8

94.9~97.5

93.1~94.8

GN3

SR20DE

GN3

GN4

RB25DET

RB26DETT

RB25DET

RB26DETT

RB20DET

VQ30DE

350Z

300ZX

VG30GETT

VG30DET

VQ30DE

STAGEAWC34

RB26DETT

RB25DET GN7

C35

C33

RB25DET

RB25DET

RB20DET

RB20DET88.9~90.7

SILVIA

93.10~98.12

GN5

G35

ECU Digram for NISSAN

18


20/25

gizzmoELECTRONICS

GN6

SILVIAPS13

S13

RPS13

PS13

RNN14

PNW10

SR20DET

SR20DE

SR20DET

91.1~93.9

96.8~99.1

89.3~90.12

95.8~98.7

90.5~98.7PRIMERA

DiagramModel EngineChassis Year Notes

GN4

GN8

GN5

GN6

GN4

GN4

GN4

SR20DET

CA18DET GN8

SR20DET

SR18DE

90.8~94.12

93.1~98.7

CA18DET 88.5~90.12

180SX 91.1~93.9

W10

PULSAR

240SX S14 KA24DE95.8~96.7

96.8~98.7 GN10

19


21/25

gizzmoELECTRONICS

GN1

GN2

GN3

GN4

GN5

16p 20p 20p20p

Earth

PowerIg2

Ig4

Ig3

Ig5 Ig6

Ig1

PowerIg1

Ig2

Ig3

Ig4 EarthIg6

Ig5

Ig1

Power

Earth

Ig4Ig3

Ig2Ig1

Power

Earth

Ig4Ig3

Ig2Ig1

Power

Earth

16p 20p 20p20p

16p 20p 20p20p

16p 16p 18p14p

16p 16p 18p14p

20


22/25

gizzmoELECTRONICS

GN6

GN7

GN8

GN9

GN10

16p 20p 20p20p

Ig4 Ig3

Ig2Ig1

Power

Earth

16p 16p 18p14p

Ig4Ig3

Ig2Ig1

Power Earth

Ig1 Ig3 Ig5

Ig2 Ig6Ig4

Power

Earth

Ig4

Ig3

Ig2

Ig1 Power

EarthIg6

Ig5

12p 24p 37p19p12p

Ig1 Power

Earth

12p 24p 37p19p12p

21


23/25

gizzmoELECTRONICS

BH5

BE5

BD5/BG5

BC5

BF5

GDFC

GDB

GDA

GC8/GF8

SF5 EJ20

LEGACY

IMPREZA

FORESTER

Diagram

GS6

GS4

GS1

GS1

GS8

GS7

GS7

GS5

GS2

GS4

Year Notes

98.6~

96.6~98.5

89.2~93.9

89.2~93.9

00.7~04.5

00.8~04.5

92.11~96.8

EJ20

Model EngineChassis

98.6~ GS6

M / T

93.10~96.5 GS2

03.1~

98.9~00.8

EJ25

96.9~98.8 GS3

98.9~

EJ20

EJ20

EJ205

EJ207

EJ20

ECU Digram for SUBARU

22


24/25

gizzmoELECTRONICS

GS1

GS2

GS3

GS4

26p 16p 22p12p

26p 16p 22p

Ig3 Ig4

Ig1

PowerEarth

Ig2

Ig3

Ig4

Ig1

Speed

Power

Ig2

26p 16p 22p12p

Power

Earth

Ig1

Ig2

Power

Earth

Ig1

Ig2

Ig3

Ig4

26p 16p 22p

23


25/25

gizzmoELECTRONICS

GS5

GS6

GS7

GS8

32p 32p 32p

34p 35p 31p

Ig3

Ig1 Power

Earth

Ig2

Ig3

Ig1 Power

EarthIg4

32p 32p 32p

PowerEarth

Ig3 Ig4Ig2Ig1

Power Earth

I 1 I 4

17p 28p 22p31p 24p

35p

launch interface ver1.02

Documents