FLO-LOCK FITTINGSASSORTED FLO-LOCK FITTINGS AND ADAPTERS RATED @ 160 PSI @ 72°F

ITEM& DESCRIPTION

PVC IPS COUPLINGSWITH FLO-LOCK

-< "x/^Ssf\

PARTNUMBER

112-05112-07112-10112-12

-<gjeM0 I 112-15tf^/? >™J ^

^^^5 \ <^>^

As cap is k tightened, pressure/^^/Sfcabvvv causes the

— into the pipeeliminating pull out.

P/G150

ITEM& DESCRIPTION

PVC IPS MALE ADAPTERWITH FLOLOCK

As cap is ^ p 3HMtightened, SL* JM ]Wpressure • ml \ ,-SL^Hcauses the m) "JTgripping ring ^^^ p/Gto bite Into the pipe eliminating 150

112-20

PARTNUMBER

135-05135-07135-10135-12135-15135-20

UPCCODE

112051120711210112121121511220

UPCCODE

135051350713510135121351513520

IPSSIZE

1/2"

%"

1"

I1//iy2"2"

IPSSIZE

1/2"3/4"

1"

1%"

1 1/2"

2"

BODYLENGTH

4"4%"41/2"5"5'/2"6"

IPSCONNECTION

y2" MIPT%" MIPT1"MIPT

I1// MIPTr/2" MIPT

2" MIPT

BOXWT.

8.59.57.58.0

16.515.0

BOXWT.

4.04.09.08.08.08.5

BOXQTY.

282415101612

BOXQTY.

252030201612

LIST PRICEEACH

2.323.124.106.116.368.31

LIST PRICEEACH

3.003.244.225.696.848.87

Stiffners for use on: IPS Polyethelyne Pipe -SDR 9 ASTMD-3035

8851-12

1 | 8851'2°

ITEM& DESCRIPTION

PVC IPS FEMALEADAPTER WITH FLOLOCK

J^j&

Thread Collar

As cap is tightened, pressurecauses the gripping ring tobite into the pipe eliminatingpull out

P/G150

PARTNUMBER

136-05136-07136-10136-12136-15136-20

UPCCODE

136051360713610136121361513602

1%"2"

BulkBulk

IPSSIZE

1/2"

%"

1"

1%"

r/211

2"

IPSCONNECTION

1/2" FIPT3/4" FIPT

r'FiPT11/4"FIPTiy2" FIPT

2" FIPT

BOXWT.

4.55.04.58.59.07.5

BOXQTY.

252014181610

2.252.77

LIST PRICEEACH

3.123.794.966.487.408.99

TECHNICAL DATAONE YEAR LIMITED WARRANTY

FIG.A STANDARD COMPRESSION

SERIES110 IPS120 IPS130 IPS210 CIS220 CTS310 IPS410 CTS420 CTS

BUNA-NSEAL

ACMETHREAD

CAP

-GRIPPING AREA

BODY

FIG.B

SERIES112 IPS135 IPS136 IPS235 CTS435 CTS

FLO-LOCK COMPRESSION

CAP ACMETHREAD

0-RING SEALPRESSURE CONTROL RING

-STAINLESS STEEL GRIPPER RING

BODY

a »n ,0i tiMSSilW-J

^cC£

U

sP V'l'*X3

*>

5TI/A^ u.S>

MADE IN U.S.A.

1. PVC MATERIAL SPECIFICATION PVC Type I, Grade I,Cell Class 12454-B meeting requirements of ASTM D-1784-75is used in the manufacturing of all fittings recommended foruse of potable cold water (see chart C for temperature vs.pressure). Not recommended for use on systems exceeding100 psi at 120 degrees F.

2. CPVC MATERIAL SPECIFICATION CPVC Type IV,Grade I, Cell Class 23447-B meeting requirements of ASTMD-1784-75 is used in the manufacturing of all fittings recom-mended for use on potable Hot Water Systems in accordancewith ASTM D-2846-73. Not recommended for use on systemsthat will exceed 100 psi at 180 degrees F.

3. BUNA-N SEAL; The gasket seal material is made ofhigh quality Buna-N Elastomeric compound which meetsthe requirements of ASTM D-2000. It is generally resistantto many hydrocarbons, fats, oils, greases, hydraulic fluidsand chemicals. It is generally attacked by Ozone, Ketones,Esters, Aldehydes, chlorinated and nitro hydrocarbons.Reference chemical resistance under NBR (Nitrile) Elastomersfor specific listings.

4. EPDM 0-RINGS The o-ring material is made of highquality EPDM (Ethylene Propylene Copolymer) which meetsthe requirements of ASTM D-2000. EPDM has exceptionallygood weather aging and ozone resistance, excellent waterand chemical resistance, and excellent aging resistance formost applications. EPDM is a polymer where oil and solventresistance is poor. However, it is fairly good in ketones andalcohols. Reference chemical resistance under EPDM, EPT, orEPR Elastomers for specific listings.

5. DOUBLE SEAL of standard compression fitting. A com-pressive action is created as the cap is tightened squeezingthe Buna-N seals into the tapered recessed areas of thecap and body. This process creates a highly concentrated pres-sure at the two "double seal" points, thus providing positiveprotection against leakage. (See illustration.)

6. ACME THREAD General purpose 10 pitch Acme threadon Compression Cap section, eliminates the possibility of crossthreading. This smooth running design prevents binding orgalling as is often experienced in standard tapered threads.

7. COMPRESSION CONNECTIONS Compression capshould be drawn up hand tight to insure proper alignment andseating of gasket, then tighten % to 1 turn with a Flo SpannerWrench or strap wrench. Average torque should be approxi-mately 25 foot pounds on !4" through 2" IPS, and 35 footpounds on 21^" and larger IPS. Compression fittings are notrecommended for use on compressed air lines or naturalgas lines.

8. THREAD CONNECTIONS Use teflon tape on all IPSthread connections. IPS thread connection should be madehand tight plus % to % turn with a wrench.

9. THRUST BLOCKING When installing the StandardCompression Seal fittings the pipe line must be restrainedfrom lateral movement by thorough soil compaction on straightruns and thrust blocking at change of direction or reductionin size. Not recommended for use on pipe lines suspendedon hangers.

10. FLO LOCK COMPRESSION ADAPTERS Recommend-ed for use on PVC pipe with wall thickness of SDR-26, Class160 or greater and copper tubing. Not recommended for use ongalvanized pipe unless surface is sanded smooth. The gripperring is made of stainless steel.

11. ALL SPRINGS Made of Series 300 Stainless Steel.

INFORMATION

U) f.Ill *a:

I 200LUHQ_

TCIUIDCD ATI IDC \/A Dl ATIOM A Kin z 1™I tMrtnAI Uric VAKIAI IUIM AIMU 1 1

WORKING PRESSURE CHART 1a 100LUQZUJ

1 50ooUJoc

OPERATING TEMPTURES IN DEGREES P0 70 80 90 100 110 120 130 140

•Ml•MM m»n» -'•~

"***,

*** «*Sj»"<*, """•V, •*>X '%*sN

CHART C - FOR ALL PVC FITTINGS

ONE YEAR LIMITED WARRANTY

FLO CONTROL, INC. warrants all new Flo Control productsagainst defects resulting from faulty workmanship or materials fora period of one (1) year from the date of original purchase.

Flo Control will replace or repair at its option any product estab-lished to be so defective with a product of like size and type.This warranty is effective only for the benefit of the original pur-

chaser (and user) and only if the following procedure is followed:1. Within thirty (30) days after noticing the defect, notify Flo

Control in writing of the alleged defect at 3210 Winona Avenue,Burbank, California 91510.2. Upon request by Flo Control, return the defective product to

Flo Control, postage prepaid, together with proof of purchase orat the option of Flo Control, make any defective product availablefor inspection.

3. Claims for labor costs and other charges resulting from theuse of Flo Control Products are not covered by this warranty.

IMPORTANT-Non shock valves manufactured from PVC Type 1 material

4. After Flo Control repairs or replaces the product, it will shipthe product back to the purchaser, postage prepaid.

This warranty only applies to products that are not altered ordamaged or used beyond their intended use. This warranty is inlieu of all other warranties express or implied of merchantabilityor fitness for a particular purpose which would otherwise extendbeyond the warranties specified herein. This warranty specifi-cally excludes incidental or consequential damages of any kind.However, some states do not allow exclusion or limitation ofimplied warranties or incidental or consequential damages, sothe above limitations may not apply to you.This warranty gives you specific legal rights, and you may also

have other rights which vary from state of state.

WATER HAMMER - Flo Control, Inc., recommends that allPVC plastic piping systems be designed and constructed toAVOID EXCESSIVE WATER HAMMER. Water hammer cancause damage, and failure to pipe, valves, and fittings within thepiping system. Not recommended in any shock applications.

SOLVENT WELDING - Flo Control, Inc., recommends that allparts that are to be solvent cemented are clean of any and allforeign materials. Most solvent cement manufacturers includeinstallation instructions on the container. It is important to followcorrect cementing instructions to avoid problems. Excessivecement or the incorrect type of cement can cause failures inthermoplastic products.

Flo Control, Inc. DOES NOT RECOMMEND the use of ther-moplastic piping products for systems to transport or storecompressed air or gases, or the testing of thermoplastic piping

systems with compressed air or gases in above and below groundlocations. The use of our product in exposed, compressed air orgas systems automatically voids our warranty for such productsand its use against our recommendations is entirely the responsi-bility and liability of the installer.

Flo Control, Inc. will not accept responsibility for damage orimpairment of its products, or other consequential or incidentaldamages caused by misapplication, incorrect assembly, and/orexposure to harmful substances or conditions.

Flo Control recommends that the local and state plumbing codesbe reviewed and understood prior to installing any of Flo Control'sproducts. These codes will provide proper installation procedures.

26