final yr questionnaire cpe 2012 final
TRANSCRIPT
-
7/31/2019 Final Yr Questionnaire CPE 2012 Final
1/4
General Students/Graduates Questionnaire1
MOI UNIVERSITY
SCHOOL OF ENGINEERING
DEPARTMENT OF CHEMICAL & PROCESS ENGINEERING
FINAL STUDENTS QUESTIONNAIRE
NOTES ON THE COMPLETION OF THE QUESTIONNAIRE
If possible, please answer each of the following questions.
If a question is not applicable to you, please go on to the next question
If likely answers are itemised, please tick the most appropriate answer. In some cases we ask you for numbers only and in
others we leave space for you to write an answer..Should there not be enough space for your answers, please include an additional sheet of paper(email).
A. STUDY OF CHEMICAL & PROCESS ENGINEERING (CPE)
1. Please, provide information on your study and trainingPlease indicate the following details
Year of starting your Bachelors degree
Year of completing your Bachelors degree
2. How important were the following factors for your decision to enrol in CPE ? Please respond to each factor on
a five-point scale by placing a tick in the appropriate box ( 1 is for very important and 5 is for not important at
all).1 2 3 4 5
Availability of sponsorship/loan
Availability/quality of accomodation
Reputation of CPE
Practice oriented study program
Admission standards and my prior grades
Advice by my parents/relatives/sponsor
If other (specify)
3. If you were to be enrolled for undergraduate studies now, would you opt for engineering? (Put a tick
where applicable)(a)
Yes
No
(b) If your answer in (a) above is Yes, which programme would you pursue?
Chemical and Process Engineering
Civil and Structural Engineering
Electrical and Electronics Engineering
Electrical and Telecommunication Engineering
Mechanical and Production Engineering
Industrial and Textile Engineering
If other (specify)
(c) If your answer in (b) above is Yes, please give reason for your option
(d) If your answer in (a) above is No, please indicate what are the reasons by ticking to appropriate choice
It is a difficult course(great chance of failing)
Not marketable
It takes more years to complete
If other (specify)
-
7/31/2019 Final Yr Questionnaire CPE 2012 Final
2/4
2
B. RETROSPECTIVE ASSESSMENT OF CPE STUDY
5. How do you rate the study provision and study conditions you are experiencing? Please rate each of the
applicable options on a 5-point scale ( 1 is for very good and 5 is for very bad).1 2 3 4 5
Assistance/advice for your final year project
Academic advice offered
Teaching quality of lecturers
Structure of the programme
Testing/grading system of examinations
Provision of supervised practical work experience
Contacts with fellow students
Chance for students to have an influence on university policies
Availability of technical equipment(e.g.PC.,measuring instruments,etc.)
Quality of equipment of laboratories/workshops
Availabilty of learning material
Affordability of relevant books in the bookshop
Quality of lecture/seminar rooms
Quality of laboratories
Quality of workshops
Provision of furniture in lecture rooms
Availability of relevant text books in the library
Availability of relevant text books in the bookshops
Accommodation facilities on campus
Counselling Services
Recreation facilities
Private study places
Availabiilty of ICT facilities
Practical Training(PT) placement
Adequacy of duties allocated at PT places
PT supervision by academic staff
PT supervision by industrial supervisors
Adequacy of PT allowance
Training Workshops
Final Year Project
6. What were the major problems encountered during PT? (Put a tick where applicable)
Poor co-operation from workers
Insufficient PT allowaces
Poor working environment
Lack of safety gadgets and protective gears
Poor supervision from the industry
If other (specify)
-
7/31/2019 Final Yr Questionnaire CPE 2012 Final
3/4
General Students/Graduates Questionnaire3
7. Suggest measures on how to improve PT (Put a tick where applicable)
Good co-operation from workers
Sufficient PT allowances
Good working environment
Provision of safety gadgets and protective gears
Good supervision from the industry
PTs to be combined instead of the 3 PTs
If other (specify)
8. Suggest types of training Workshops to be provided? (Put a tick where applicable)
Bench
Welding
Electronics
Building
Machine tools
Electrical
Carpentry
Chemical
Plumber
If other (specify)
9. What were the major problems encountered during Training Workshops?
Lack of safety gadgets and protective gear
Poor working environment
Inadequate materials, tools,equipment and teaching aids
Shorter training period per workshop
Inadequate number of workshop training teaching staff
If other (specify)
10. Suggest measures on how to improve Training Workshops
Improve availability of safety gadgets and protective gears
Good working environment
Providing adequate materials,tools,equipment and teaching materials
Lengthening training period per workshop
Increase number of teaching staff in Training Workshops
If other (specify)
11. What were the major problems encountered during Final Year Project?
Insufficient time of doing project
Lack of allowance for project
Inadequate laboratory equipment and tools
Inefficient supervision
If other (specify)
-
7/31/2019 Final Yr Questionnaire CPE 2012 Final
4/4
4
12. Suggest measures on how to improve Final Year Project
Increasing time of doing final years project by reducing number of other final year courses
Provision of allowance for project
Improving accessability of laboratory equipment and tools
Improving project supervision
If other (specify)
C. SOCIO-BIOGRAPHIC DATA
Please provide details about yourself in order to enable us to interpret your work biography as accurately as possible.
13. Year of birth
14. County of birth/residence/...
County of birth
County of residence
15. Sex
Male
Female
D. CONCLUDING COMMENTS
16. What kind of contacts do you have with the department and how should these contacts be fostered between the
department and its graduates?Multiple responses possible
Current Suggested
contact contact
Newsletter
Graduate meetings
Formation of alumnia association
Stimulation of professional co-operation
Assistance regarding profession
Convocation
If other (specify)
17. What is the best way of promoting contacts between the university and the graduates?.Click here to enter text.
18. Feedback and disseminationWe are going to conduct a stakeholders workshop to give feed and disseminate the findings of our survey by a way ofcurriculum development. Would you be interested to attend the workshop?
Yes
No
N/A
Thank you very much for completing the questionnaire.