extinguishing catalog

tyco Fire &Security

Tyco ElectronicProduct Group

IntroductionWelcome to Tyco Electronic Product Group’s Extinguishing Product Catalogue. We aim to make your product range ascomprehensive as possible to ensure you never need to go anywhere else. To meet this goal, our product specialists, with yourhelp, have selected the most appropriate, cost effective product range all available for next day delivery.

In line with our ISO 9000 accreditation, only those products that meet the highest quality criteria have been included.

Our Warehouse is one of the largest Fire & Security product distribution centres inEurope. Our goal is to despatch product the same day as we receive your order. Ourwarranty and service returns policy is second to none. We recognise that yourbusiness is highly dependent on excellence in customer service and, to help achievethis, we offer extended warranty from many of our suppliers. Full credit is alsoavailable on a “No Question - No Fuss” basis for any new in-warranty productreturned to the distribution centre.

Our training department offers comprehensive sales, design and engineering training onour complete range of products. We recommend you take advantage of this free ofcharge service. As always, training can be undertaken any time, anywhere to suit yourbusiness needs. On-line telephone support is also available by telephoning +44 1932 743287.

Tyco Electronic Product Group’s Web site contains an endless supply ofproduct related information. It is regularly updated and features many aidsto the selling process including presentation material, independentproduct test results and detailed technical information.

Our Web site can be found atwww.tycofire.com/tycoepg

To enhance customer specifications and quotations we also provide a series ofproduct datasheets which can give our clients an opportunity to read more aboutthe product. We are positive that together we can help grow your business andwe look forward to working with you in the future.

For further details on this catalogue, contact our customer telephone Help Lineon+44 1932 74 3327

ext2.qxd 13/02/01 16:56 Page 1

tyco Fire &Security


Table of Contents

3 Inergen 200 Bar Equipment & Components

14 FM200 Equipment & Components - Standard

21 FM200 Equipment & Components - UL Listed

25 Carbon Dioxide Equipment & Components

33 Wet Chemical System Components

36 Pipework, Fixings & General Components

ext2.qxd 13/02/01 16:56 Page 2

Inergen 200 Bar systems are configured around arange of five container and valve assemblies.Each basic assembly consists of:. Inergen container complete with transport cap. Inergen valve assembly. Inergen container labels

Each container is provided with a specific chargeof Inergen to a nominal pressure of 200 bar at15oC.Containers are designed, manufactured andmarked in accordance with EEC/84/525 and arepressure tested to 300 bar.Labels providing handling, maintenance andrecharge instructions are fitted to all containers.Containers are coloured red to BS4800:04 E53with a grey top dome to RAL 7031.. To raise containers off the floor, grates are

available in two sizes:- Grate for 3 containers - 303.681.656- Grate for 2 containers - 303.681.606

Product Codes302.404.12627 Litre container assy (5.8 cu.m Inergen)302.404.13640 Litre container assy (8.6 cu.m Inergen)302.404.14050 Litre container assy (10.75 cu.m Inergen)302.404.14667 Litre container assy (14.4 cu.m Inergen)302.404.15680 Litre Container assy (17.2 cu.m Inergen)

tyco Fire &Security


Inergen 200 Bar Equipment & Components

Inergen Containers

Inergen is a mixture of Nitrogen, Argon andCarbon Dioxide gases and has been speciallydeveloped to provide fire protection as a Halon1301 replacement. Inergen extinguishes fire byreducing the oxygen level in a room to below15%, the point at which most combustibles will no

longer burn. Simultaneously, the Carbon Dioxidein Inergen stimulates the uptake of oxygen by thehuman body, so protecting anyone who might betrapped in the fire area from the effects of thelowered oxygen levels.

Inergen is stored in gaseous form. It thereforedoes not produce fog when the gas is releasedinto the room. Because Inergen is a mixture ofnaturally occurring gases, it does not formdecomposition products in a fire.

Technical Specification

Container Size (Litres) Diameter (mm) Dimension B* Dimension C* Dimension D* Tare Weight (Kg)* Gross Weight (Kg)*Dimension A

27 204 1060 1100 1200 38 4940 204 1485 1525 1625 50 6250 230 1473 1505 1605 60 7567 267 1485 1525 1625 90 11080 267 1745 1785 1885 103 128

*approximate

THREAD DIN4668W80 x 1/11”

TRANSPORTCAP

LABEL

Container Size Assembly Product Code Inergen Qty Inergen Qty(Litres) (cu.m) (Kg)

27 302.404.126 5.8 8.240 302.404.136 8.6 12.050 302.404.140 10.75 15.267 302.404.146 14.4 20.380 302.404.156 17.2 24.3

The release head II is the connecting componentbetween the Inergen valve and the actuatingdevices (solenoid actuator, pneumatic actuator orlocal manual actuator). The release head containsa release pin which is pushed down by theactuating device. The release pin bursts theactuating disc inside the valve to cause operation.Technical SpecificationNet Weight: 0.3Kg

Product Code302.413.826Release head II

Release Head II

ext2.qxd 13/02/01 16:56 Page 3

tyco Fire &Security


The solenoid actuator is used to electricallyoperate the container valve. The solenoid isoperated at 24Vd.c. (power consumption - 15Watts) and rated to IP65.It is fitted onto the Release Head II by means of aknurled swivel coupling which enables the unit tobe positioned as preferred for electricalconnection.The solenoid actuator is normally fitted to thecontainer designated as the ‘Master’ or in a twinrelease assembly configuration, the first twocontainers. The actuator is an electro-mechanicaldevice which when energised causes the central

pin to move downwards, to push the central pinof the Release Head II downwards which in turnpunctures the burst disc in the valve.The power lead fitted with a DIN plug forconnecting to the solenoid is not supplied withthe solenoid actuator and is to be orderedseparately (Product Code 304.001.001).Technical SpecificationNet Weight: 0.95Kg

Product Code302.460.326Solenoid actuator SF-2

Solenoid Actuator - Standard

The solenoid resetting tool is used to reset thesolenoid actuator following operation.The resetting tool is supplied with the solenoidactuator and need not be ordered separately.Technical SpecificationNet Weight: 0.41Kg

Product Code302.382.196Solenoid resetting tool

Solenoid Resetting Tool

The pneumatic actuator is used as a releasingcomponent in the twin release assembly and insystems using pilot container actuation. It isinstalled between the release head II and thesolenoid actuator.The actuator requires a minimum pressure of 10bar to cause operation.Technical SpecificationNet Weight: 0.25Kg

Product Code302.413.886Pneumatic actuator

Pneumatic Actuator

The twin release arrangement is based on thecombination of an electrical and pneumaticrelease for dual master container operation.Under normal operating conditions both valveswill be actuated electrically. However, in the eventof a condition arising where only one valve iselectrically operated, then it will cause pneumaticoperation of its twin.

The components in this arrangement (that arepictured elsewhere in this catalogue) are asfollows:. 2 x Solenoid Actuator. 2 x Release Head II. 2 x Pneumatic Actuator. 2 x Twin Release Hose. 4 x Straight Coupling RA6

Product Codes302.460.326Solenoid actuator SF-2302.413.826Release head II302.413.886Pneumatic actuator302.470.506Twin release hose300.296.276Straight coupling RA6

Twin Release Arrangement

This version of the solenoid actuator is used toelectrically operate the container in the same waythat the standard actuator does, but it is providedwith protection to EEx me II T4, IP65. Thesolenoid is operated at 24Vd.c. (PowerConsumption - 9 Watts) and is available in othervoltages and/or types of current rating.It is fitted onto the release head II by means of aknurled swivel coupling which enables the unit tobe positioned as preferred for electricalconnection.The solenoid actuator is normally fitted to thecontainer designated as the ‘Master’ or in a twinrelease assembly configuration, the first two

containers. The actuator is an electro-mechanicaldevice which when energised causes the centralpin to move downwards, to push the central pinof the release head II downwards which in turnpunctures the burst disc in the valve.The power lead supplied with the actuator is a 1metre cable (NYSLYO 3 x 1.5mm2).Technical SpecificationNet Weight: 0.95Kg

Product CodeSL 93627Solenoid actuator SF2-EXD

Solenoid Actuator - Explosion Proof

The manual release actuator (local) is used tomechanically operate the system at the containerlocation.Accidental operation is prevented by means of asteel safety pin. The steel safety pin must beremoved to allow the use of the local manualactuator. After removing the steel safety pin,manual operation is caused by pushing the leverdownwards.The unit is designed so that it may be fitted

directly onto the release head II and be used inconjunction with a solenoid actuator, if required.Pushing the operating lever downwards causesthe central pin to move downwards onto thecentral operating pin of the release head II.Technical SpecificationNet Weight: 0.5KgProduct Code302.406.276Manual release actuator

Manual Release Actuator (Local)

ext2.qxd 13/02/01 16:56 Page 4

tyco Fire &Security


The standard container pressure indicator (DKE-4) indicates the Inergen pressure inside thecontainer. It is fitted to the pressure gaugeadaptor of the container valve. The connectionnut of the pressure indicator contains a pin whichopens a seal on the pressure gauge adaptorwhen the pressure indicator is firmly attached tothe valve. Fitting and removal of the pressureindicator can be carried out without loss ofInergen.

When fitting it is only necessary for theconnection nut to be hand tightened.CAUTION: Over tightening may damage the ‘O’ring seal which will cause the joint to leak.Technical SpecificationNet Weight: 0.15KgProduct Code302.410.966Pressure indicator DKE-4

Container Pressure Indicator - Standard (DKE-4)

The pressure switch is mounted in the distributionpipework and may be used to provide anelectrical indication of the release of Inergen or toperform ventilation shut-downs or other interlockfunctions.It is designed to be mounted downstream of thepressure reducing unit and must not be mountedbefore it.The pressure switch requires to be manually resetfollowing operation.A minimum pressure of 3 bar is required toensure satisfactory operation. Connections to thepressure switch are either 1/2” NPT (male) or 1/8”

NPT (female).As an alternative to this switch and/or inapplications where the pressure switch requiresto be mounted in the ‘high pressure’ part of theinstallation, pressure switch (Product Code - SL93851) may be used. Technical SpecificationNet Weight: 1.4Kg

Product Code305.205.002Gas release pressure switch - manual reset

Pressure Switch (Manual Reset)

The supervisory container pressure indicator (KM-2) indicates the Inergen pressure inside thecontainer and allows for a signal to be providedwhen the pressure falls below a set point. The setpoint is adjustable between 100 and 240 bar, andit is recommended that it is set at a pressure of185 bar. It is fitted to the pressure gauge adaptorof the container valve. The connection nutcontains a pin which opens a seal on thepressure gauge adaptor when the pressureindicator is firmly attached to the valve. Fittingand removal of the pressure indicator can becarried out without loss of Inergen.The set point can be adjusted by removing the

front cover and moving the pointer to analternative pressure.When fitting it is only necessary for theconnection nut to be hand tightened. CAUTION: Over tightening may damage the ‘O’ring seal which will cause the joint to leak.Technical SpecificationNet Weight: 0.15Kg

Product Code302.410.976Pressure indicator complete with supervisorypressure switch KM-2

Container Pressure Indicator - Supervised (KM-2)

The pressure switch is mounted in the distributionpipework and may be used to provide anelectrical indication of the release of Inergen or toperform ventilation shut-downs or other interlockfunctions.The pressure switch may be mounted in the ‘highpressure’ part of the installation. This switch doesnot have a manual reset button and will resetupon loss of pipework/manifold pressure.

Technical SpecificationNet Weight: 1.4Kg

Product CodeSL 93851Gas release pressure switch - auto reset

Pressure Switch (Automatic Reset)

Manifolds are used on all multi-containerarrangements and are designed to allow theinstallation of single, double or triple rows ofcontainers into a single manifold. The manifoldsare available in two lengths to suit a maximum ofeither six containers - 560mm, or nine containers -840mm. The manifolds have opposite handedthreads at each end (right hand/left hand), so thatthey can be connected easily and safely in situ, using the standard high pressure fittings.

NOTE: When the manifolds are used on a singlerow of containers a six port manifold will onlysuffice for two containers and the nine port foreach set of three containers.On double rows, a six port manifold will becapable of handling up to four containers and anine port manifold up to six containers. Themanifolds may only be used up to their fullcapacity in triple row arrangements.

All manifolds are pressure tested to 320 bar.Each manifold is supplied with a full set of checkvalves, but manifold outlet caps (blanking caps)must be ordered separately (Product Code -302.424.526) for each ‘unused’ outlet.Technical SpecificationNet Weights:- 6 Outlet Manifold - 11.5Kg- 9 Outlet Manifold - 15.8Kg

Product Codes302.403.356Manifold D50 x 840mm - 9 point302.403.336Manifold DN50 x 560mm - 6 point

Manifolds

302.403.336

302.403.356

ext2.qxd 13/02/01 16:57 Page 5

A number of high pressure fittings are availablethat have been specially designed to allow fortheir installation in the ‘high pressure pipework’between the manifold, the pressure reducing unitand distribution valves. The fittings are providedwith left and/or right handed threads to allow theiruse in a number of positions in thepipework/manifold arrangement. The availablefittings are based on multiples of a standarddimension of 280mm, which is the distancebetween container centres.All fittings are pressure tested to 320 bar.

High Pressure Fittings

Technical SpecificationDescription Product Code Nominal Size (mm) A (mm) B (mm) C D Weight (Kg)Union Joint 50 RL 302.403.116 50 88 100 2” - ISO right 2” - ISO left 2.4Union Joint 80 RL 302.403.156 80 113.5 110 3” ISO right 3” - ISO left 3.3End Joint 50 R 302.403.146 50 88 80 2” - ISO right 1/2” - NPT 2.1End Joint 50 L 302.403.186 50 88 80 2” - ISO left 1/2” - NPT 2.1End Joint 80 R 302.403.196 80 113.5 95 3” - ISO right 1/2” - NPT 3.0End Joint 80 L 302.403.206 80 113.5 95 3” - ISO left 1/2” - NPT 3.0

UNION JOINT END JOINT


Description Product Code Nominal Size (mm) A (mm) B (mm) C D Weight (Kg)Connecting Pipe 560-50 RL 302.402.586 50 70 560 2” - ISO right 2” - ISO left 8.5Connecting Pipe 560-80 RL 302.402.596 80 95 560 3” - ISO right 3” - ISO left 13.7


Description Product Code Nominal Size (mm) A (mm) B (mm) C D E Weight (Kg)Tee 80 RRL 302.403.216 80 95 127.5 3” - ISO right 3” - ISO right 3” - ISO left 6.0Tee 80x50x80 RRL 302.403.236 80/50 95 127.5 3” - ISO right 2” - ISO right 3” - ISO left 5.6Tee 80x25x80 RRL 302.403.256 80/25 95 127.5 3” - ISO right 1” - ISO right 3” - ISO left 5.3Tee 50 RRL 302.403.276 50 70 102.5 2” - ISO right 2” - ISO right 2” - ISO left 4.4Tee 50x25x50 RRL 302.403.296 50/25 70 102.5 2” - ISO right 1” - ISO right 2” - ISO left 3.2Elbow 50 RL 302.403.076 50 70 102.5 2” - ISO right 2” - ISO left N/A 2.2Elbow 80 RL 302.403.096 80 97 127.5 3” - ISO right 3” - ISO left N/A 4.3

The manifold outlet cap is fitted to all unusedcheck valves on the manifold.Technical SpecificationNet Weight: 0.4Kgs

Product Code302.424.526Manifold check valve cap M18 x 1.5

Manifold Outlet Cap

Page 6

tyco Fire &Security


Union Joint End Joint

Connecting Pipe

ext2.qxd 13/02/01 16:57 Page 6

tyco Fire &Security


The 10mm discharge hose connects thecontainer valve outlet to the check valve on themanifold and is sufficiently flexible toaccommodate the small variations found incontainer height. Swivel female connections allowease of installation in any orientation.

The discharge hose is pressure tested to 480 bar.Technical SpecificationNet Weight: 0.35KgProduct Code302.470.226Discharge hose DN10

Discharge Hose

The check valve is used on the actuation lines ondistribution valve systems.As a precaution it should be installed in duplicatein critical locations. An arrow on the body of thedevice identifies the required direction of the flow.The cracking pressure is approximately 0.03 barand the device can accommodate a maximumworking pressure of 406 bar.Technical SpecificationNet Weight: 0.125Kg

Product CodeSL 93464Actuation line check valve

Actuation Line Check Valve

The vent valve is used in the actuation line ofsystems where an unintentional build-up ofpressure, perhaps through a leak, could beproblematic. The device will automatically relievepressure up to approximately 3 bar, but will sealto completely prevent loss of actuation pressureabove 3 bar.The contained pressure may be released bypressing the knurled button on the top.

The vent valve is fitted into a tee (P/C300.291.937) in the actuation line using the10mm x 1/4” stud coupling (P/C SL 93486) and ashort length of 10mm tube (P/C 304.030.506).Technical SpecificationNet Weight: 0.1KgProduct CodeSL 93866Actuation line vent valve

Actuation Line Vent Valve

The total flooding nozzles are designed touniformly distribute Inergen throughout thehazard area. All nozzles are specifically drilled tosuit the individual design requirements.Each nozzle is permitted to cover an area up to30 sq. metres at an enclosure height of equal toor greater than 0.5 metres and up to 20 sq.metres in an enclosure of height less than 0.5metres. There is a maximum height restriction of 5metres.Where the size of any hazard enclosuredetermines that one nozzle does not provide

coverage within the above parameters the hazardshould be theoretically sub divided intoappropriately sized modules.Nozzles are provided in brass as standard.Technical SpecificationNet Weight: IRD 1/2” - 0.05Kg

IRD 1” - 0.15KgProduct CodesSL 939431/2” Nozzle (3mm - 10mm)SL 939381” Nozzle (11mm - 20mm)

Total Flooding Nozzles

SL 93943SL 93938

The Inergen bowl type nozzles allow the Inergento be discharged more gently into the hazardarea.All nozzles are specifically designed to suit theindividual design requirements.Each nozzle is permitted to cover an area of up to30 sq. metres at an enclosure height equal to orgreater than 0.5 metres and up to 20 sq. metresin an enclosure height less than 0.5 metres.Where the size of any hazard enclosuredetermines that one nozzle does not providecoverage within the above parameters the hazardshould be theoretically sub divided intoappropriately sized modules.

Technical SpecificationNet Weight: IBD-50 - 0.3Kg

IBD-70 - 0.3KgProduct CodesSL 93429Cup nozzle IBD - 50 (1.5mm - 2.5mm)SL 93430Cup nozzle IBD - 70 (3mm - 10mm)

Inergen Bowl Type Nozzles

SL 93430 SL 93429

302.403.236

302.403.256

302.403.276

302.403.096

ext2.qxd 13/02/01 16:58 Page 7

tyco Fire &Security


The pressure reducing unit reduces the Inergenpressure from 200 bar to a maximum of 60 bar.The orifice size is calculated using the hydraulicflow calculation programme.

Units DRE-2N, DN50 and DRE-2N, DN80comprises of the following components:. Inlet flange with one O-Ring. Orifice plate with two O-Rings. Outlet flange to be installed without O-Ring. Nuts, bolts and washers (6-off per assembly)In assembling the units the following torques areto be applied to the bolts:. DRE-2N, DN50 - 28Nm. DRE-2N, DN80 - 76NmTechnical SpecificationNet Weights: DRE-2N, DN50 - 9.3Kg

DRE-2N, DN80 - 23.7KgProduct CodesDN50302.403.736Inlet flange DN50302.427.566Orifice plate DN50300.101.056‘O’ Ring for DN50 P.R.U.

302.403.736Outlet flange DN50300.580.136Bolts (M12 x 85mm) for P.R.U.DN80302.403.716Inlet flange DN80302.427.586Orifice plate DN80300.101.786‘O’ Ring for DN80 P.R.U.302.403.716Outlet flange DN80300.580.236Bolts (M16 x 110mm) for P.R.U.

Pressure Reducing Units - Multiple Container Systems

The distribution valve is used in applicationswhere multiple areas require to be protected froma single bank of containers.The valves are operated pneumatically by a pilotcontainer (P/C SL 93462) or manually by use ofthe manual operating lever.The distribution valve requires a minimumpressure of 50 bar to satisfactorily operate it andthe precise configuration of the actuation systemis critical in ensuring that the system operates asintended. The actuation port is 1/4” NPT (fitadaptor P/C SL 93486 to allow connection to theactuation tubing).

Breathers, required to be fitted to ensurecomplete operation of the valve and to preventingress of dirt are supplied with the valve.The valve is supplied with 50mm NPTconnections as standard, but is available in othersizes to order.Technical SpecificationNet Weight: 13.6KgProduct CodeSL 9347250mm (2”) Pressure operated distribution valve

Distribution Valves

The manual by-pass valve is used to allowInergen to be safely vented to atmosphere if itbecomes trapped within a closed pipeworksection. The valve is available as standard in15mm NPT.The valve is used in the normally closed positionand is provided with a locking device into which astandard padlock may be fitted.Technical SpecificationNet Weight: 0.25Kg

Product Code302.001.00815mm (1/2”) Manual ball valve

Manual By-Pass Valve

The Inergen pressure relief valve is designed toautomatically relieve excess pressure in thepipework system. A valve is normally fitted in all‘closed’ sections of pipework, ie. between thecontainers and stop valves, etc. It is set to openat approximately 250 bar.It is a requirement that the outlet from the valve ispiped to atmosphere away from personnel. Amanual by-pass valve must be incorporated intothe pressure relief arrangements to allow fortrapped Inergen to be safely vented toatmosphere.


Product CodeSL 93466Pressure relief valve (250 bar)

Pressure Relief Valve

302.403.736

302.427.566

300.580.136300.101.056

The ‘single container’ pressure reducing unit(DRE-2S) reduces the Inergen pressure from 200bar to a maximum of 60 bar and is only used onsingle container systems.In order to reduce the pressure the orifice size iscalculated using the hydraulic flow calculationprogramme.The unit is installed between the Inergencontainer and the pipework system.


Product Code302.430.616Single container orifice unit DRE-2S

Pressure Reducing Unit - Single Container Systems

ext2.qxd 13/02/01 16:58 Page 8

tyco Fire &Security


The pilot container release solenoid is used toelectrically operate the pilot container. Thesolenoid is operated at 12Vd.c. (CurrentConsumption - 0.57A). It is fitted directly onto thetop of the pilot container valve by means of ahexagonal swivel coupling which enables the unitto be positioned as preferred for electricalconnection.NOTE: The central pin must be in the retractedposition before the solenoid is fitted otherwise thepilot container valve will be operated and willdischarge immediately.

When utilising only one pilot container, an in-lineresistor (P/C SL 73606) is required in thesupervised release circuit.Technical SpecificationNet Weight: 2.0Kg

Product CodesSL 73327Solenoid actuator for pilot containerSL 73606Resistor for SL 73327

Pilot Container Release Solenoid

The pilot container manual/pneumatic adaptor isused to operate the pilot container eithermanually or pneumatically. It is designed so that itmay also be used in conjunction with the pilotcontainer release solenoid in which case it isscrewed onto the top of the solenoid actuator.Accidental manual release is prevented by meansof a steel safety pin. The steel safety pin must beremoved to allow the use of the actuator.When pneumatic operation is required a minimumpressure of 2.1 bar is provided to the pneumaticactuation port. (Connection to this port is 1/4”NPT).


Product CodeSL 32094Manual/Pneumatic actuator for pilot container

Pilot Container Manual/Pneumatic Actuator

The Odouriser 2000 is an optional device,designed to give a distinctive smell to the Inergenand is particularly useful in basements or lowlying areas in the vicinity of the system or anyplace where Inergen could drift to following adischarge.Liquid citrus odour is contained in the body of theodouriser and is sealed in by a lead disc.Pressure of the discharging Inergen causes thedisc to rupture and allows the liquid to escapeand mix with the Inergen. The odouriser must bereplaced after each operation of the system.Connection to the pipework is 15mm (1/2”) NPT(male).


Product Code305.200.003Odouriser

Odouriser 2000

The Inergen pilot container may be used topneumatically operate Inergen systems andassociated distribution valves where fitted.

Product Codes300.203.003N2 Pilot container complete with gauge and S.P.S.SL 93529Pilot container strap - 150mmSL 93530Pilot container wall bracket

Inergen Pilot Container

ext2.qxd 13/02/01 16:59 Page 9

Product Codes300.291.966Master container tee 12mm SL 96303Pressure actuated damper/door release302.403.056M18 x M16 Actuation hose300.291.936Slave container branch teeSL 93486Adaptor 10mm x 1/4” NPT304.030.506Actuation tubing 10mm x 1.5302.470.216Hose DN8302.470.506Twin Release hose

Actuation Hoses, Fittings, Manifolds & Fixings

Product Codes300.291.226Straight coupling RA10300.291.416Straight coupling RA12300.291.916Slave container elbow300.291.937Vent valve tee300.291.939Straight coupling 10mm300.291.940Straight coupling 10mm x 6mm300.291.941Elbow - tube x tube302.413.676Non return valveSL 93465Tube connector 10mm x 1/4” NPTSL 93485Adaptor 10mm x 1/8” NPT

Inergen Actuation Ancillaries

302.470.216

304.030.506SL 93486300.291.936

300.291.966

302.403.056

1

2

3

4

5

6

7

8

10 9

Key1 - 300.291.2262 - 300.291.4163 - 300.291.9164 - 300.291.9375 - 300.291.9396 - 300.291.9407 - 300.291.9418 - 302.413.6769 - SL 9346510 - SL 93485

302.470.506

Page 10

tyco Fire &Security


The fixing components have been designed toenable the Inergen containers to be rackedquickly and safely. The following components areavailable. Some or all of these may be used onany installation:

Key1 Retention Bar-560: Net Weight - 1.5Kg2 Retention Bar-860: Net Weight - 2.32Kg3 Retention Ring: Net Weight - 2.3Kg4 Fixing Link: Net Weight - 0.06Kg5 Manifold Bracket Short: Net Weight - 1.5Kg6 Manifold Bracket Long: Net Weight - 2.54Kg7 Free Standing Post: Net Weight - 16.4Kg8 Fixing Kit: Net Weight - 0.85KgProduct Codes302.401.026Retention bar - 560302.401.046Retention bar - 840302.401.406Retention ring302.400.806Fixing link

302.401.066Manifold bracket - short302.401.086Manifold bracket - long302.401.096Fixing kit (each fixing kitcomprises of 2 x ‘U’ Bolt c/wnuts, 4 x Coach bolts andfixings, 5 x M10 nuts andbolts)302.401.426Free-Standing Post

Inergen Container Racking - Multiple Containers (Retention Ring)

As an alternative to the retention ring method offixing, single containers can be racked usingstraps and channel.Product CodesSL 93841Container strap - 267mmSL 93848Container strap - 230mmSL 93852Single container wall rack

Inergen Racking - Single Containers

SL 93848

SL 93852

SL 93841

1

2

3

8

4 6

5

7

ext2.qxd 13/02/01 16:59 Page 10

tyco Fire &Security


As an alternative to the retention ring method offixing, containers can be racked using straps andchannel.Product CodesSL 93852Wall Rack (2 container)SL 93854Wall Rack (3 container)SL 93855(Wall Rack (5 container)SL 93856Centre Rack (2 container)

SL 93857Centre Rack (3 container)SL 93858Centre Rack (5 container)SL 93861Double row rack and bolt assembly

Inergen Container Racking - Multiple Containers (Wall Racks)

SL 93852

SL 93856 SL 93861

Product Codes302.205.014Over pressurisation ventsSL 99999Inergen container label (transparent)

Inergen Ancillaries

The door caution plate (lock off) providesinstructions to personnel who may enter an areaprotected with Inergen.This version of the caution plate is used when it isnecessary to instruct personnel to place thesystem on manual control before entering theprotected area.One plate is to be fixed to all entrance doors intoan Inergen protected area.Four 4mm fixing holes are provided.

Technical SpecificationDimensions: 210 x 210 mm

Product CodeSL 93481Door caution plate (lock off)

Door Caution Plate (Lock Off)

The door caution plate (no lock off) providesinstructions to personnel who may enter an areaprotected with Inergen.This version of the caution plate is used when it ispermitted to leave the system on automaticcontrol even while the area is occupied.One plate is to be fixed to all entrance doors intoan Inergen protected area.Four 4mm fixing holes are provided.


Product CodeSL 93482Door caution plate (no lock off)

Door Caution Plate (No Lock Off)

Product CodeSL 93411Trim ring for 1” nozzle - chrome

Inergen Nozzle Trim Ring

The manual release caution plate providesinstructions to personnel on the use of manualcontrols.One plate is to be fixed adjacent to all positionsfrom where Inergen can be released manually.Four 4mm fixing holes are provided.Technical SepcificationDimensions: 210 x 75 mm

Product CodeSL 93936Manual release plate

Manual Release Caution Plate

ext2.qxd 13/02/01 17:00 Page 11

tyco Fire &Security


KITS - Solenoid OperatedIn order to assist the ordering of the correctcomponents to form the Inergen Container bank,a range of kits are available to cover the mostpopular combinations utilising single, double andtriple row arrangements.Each kit comprises the appropriate quantity ofInergen containers, Inergen gas, racking,

pressure gauges, solenoid, solenoid resettingtool, release head II, discharge hoses, manualactuator, pressure switch, actuation hoses/fittings,manifolds/fixings/fittings/support brackets,connecting pipes, pressure reducing unit andmanual caution plate.

The kits exclude items which are specific to anindividual enclosure, such as Door caution plates,Nozzles, Pipework, Fittings, Fixings and specialitems such as Distribution valves.

Typical Container Arrangement

Reference Description Reference Description1 Inergen Container Assembly 10 Manifold2 Container Nameplate 11 Pressure Reducing Unit3 Manufacturers Stampings 12 Pressure Switch4 Container Neck Ring 13 Solenoid 5 Flexible Discharge Hose 14 Manual Release Caution Plate6 Valve Cap 15 Manual Actuator7 Manifold Ckeck Valve* 16 Pressure Indicator8 Manifold End Cap 17 Release Head II9 Actuation Hose* Capped when not used

ext2.qxd 13/02/01 17:00 Page 12

tyco Fire &Security


Description Kit No. Weight1 x 27 Litre container - single row 901.505.055 56Kg2 x 27 Litre container - single row 901.505.056 149Kg1 x 40 Litre container - single row 901.505.057 69Kg2 x 40 Litre container - single row 901.505.058 175Kg3 x 40 Litre container - single row 901.505.059 245Kg1 x 50 Litre container - single row 901.505.060 82Kg2 x 50 Litre container - single row 901.505.061 201Kg3 x 50 Litre container - single row 901.505.062 284Kg2 x 50 Litre container - single row 901.505.061 201Kg3 x 50 Litre container - single row 901.505.062 284Kg1 x 67 Litre container - single row 901.505.063 118Kg2 x 67 Litre container - single row 901.505.064 271Kg3 x 67 Litre container - single row 901.505.065 389Kg1 x 80 Litre container - single row 901.505.066 136Kg2 x 80 Litre container - single row 901.505.067 307Kg3 x 80 Litre container - single row 901.505.068 443Kg4 x 80 Litre container - single row 901.505.069 585Kg5 x 80 Litre container - single row 901.505.070 721Kg6 x 80 Litre container - single row 901.505.071 858Kg7 x 80 Litre container - single row 901.505.072 1002Kg8 x 80 Litre container - single row 901.505.073 1138Kg9 x 80 Litre container - single row 901.505.074 1274Kg10 x 80 Litre container - single row 901.505.075 1416Kg11 x 80 Litre container - single row 901.505.076 1553Kg12 x 80 Litre container - single row 901.505.077 1689Kg13 x 80 Litre container - single row 901.505.078 1834Kg14 x 80 Litre container - single row 901.505.079 1970Kg15 x 80 Litre container - single row 901.505.080 2106Kg16 x 80 Litre container - single row 901.505.081 2248Kg17 x 80 Litre container - single row 901.505.082 2385Kg18 x 80 Litre container - single row 901.505.083 2521Kg19 x 80 Litre container - single row 901.505.084 2665Kg20 x 80 Litre container - single row 901.505.085 2801Kg4 x 80 Litre container - double row 901.505.086 569Kg5 x 80 Litre container - double row 901.505.087 705Kg6 x 80 Litre container - double row 901.505.088 837Kg7 x 80 Litre container - double row 901.505.089 979Kg8 x 80 Litre container - double row 901.505.090 1110Kg9 x 80 Litre container - double row 901.505.091 1246Kg10 x 80 Litre container - double row 901.505.092 1377Kg11 x 80 Litre container - double row 901.505.093 1514Kg12 x 80 Litre container - double row 901.505.094 1645Kg13 x 80 Litre container - double row 901.505.095 1790Kg14 x 80 Litre container - double row 901.505.096 1921Kg15 x 80 Litre container - double row 901.505.097 2057Kg16 x 80 Litre container - double row 901.505.098 2188Kg17 x80 Litre container - double row 901.505.099 2324Kg18 x 80 Litre container - double row 901.505.100 2456Kg19 x 80 Litre container - double row 901.505.101 2598Kg20 x 80 Litre container - double row 901.505.102 2729Kg21 x 80 Litre container - double row 901.505.103 2866Kg22 x 80 Litre container - double row 901.505.104 2997Kg23 x 80 Litre container - double row 901.505.105 3133Kg24 x 80 Litre container - double row 901.505.106 3264Kg25 x 80 Litre container - double row 901.505.107 3409Kg26 x 80 Litre container - double row 901.505.108 3540Kg27 x 80 Litre container - double row 901.505.109 3676Kg28 x 80 Litre container - double row 901.505.110 3807Kg29 x 80 Litre container - double row 901.505.111 3944Kg30 x 80 Litre container - double row 901.505.112 4075Kg31 x 80 Litre container - double row 901.505.113 4217Kg32 x 80 Litre container - double row 901.505.114 4348 Kg33 x 80 Litre container - double row 901.505.115 4485Kg34 x 80 Litre container - double row 901.505.116 4616Kg35 x 80 Litre container - double row 901.505.117 4752Kg36 x 80 Litre container - double row 901.505.118 4883Kg37 x 80 Litre container - double row 901.505.119 5028Kg38 x 80 Litre container - double row 901.505.120 5159Kg39 x 80 Litre container - double row 901.505.121 5295Kg40 x 80 Litre container - double row 901.505.122 5426Kg6 x 80 Litre container - triple row 901.505.123 833Kg7 x 80 Litre container - triple row 901.505.124 970Kg8 x 80 Litre container - triple row 901.505.125 1101Kg9 x 80 Litre container - triple row 901.505.126 1232Kg10 x 80 Litre container - triple row 901.505.127 1379Kg11 x 80 Litre container - triple row 901.505.128 1511Kg12 x 80 Litre container - triple row 901.505.129 1642Kg13 x 80 Litre container - triple row 901.505.130 1773Kg14 x 80 Litre container - triple row 901.505.131 1905Kg

Description Kit No. Weight15 x 80 Litre container - triple row 901.505.132 2036Kg16 x 80 Litre container - triple row 901.505.133 2172Kg17 x 80 Litre container - triple row 901.505.134 2303Kg18 x 80 Litre container - triple row 901.505.135 2434Kg19 x 80 Litre container - triple row 901.505.136 2580Kg20 x 80 Litre container - triple row 901.505.137 2711Kg21 x 80 Litre container - triple row 901.505.138 2843Kg22 x 80 Litre container - triple row 901.505.139 2979Kg23 x 80 Litre container - triple row 901.505.140 3110Kg24 x 80 Litre container - triple row 901.505.141 3241Kg25 x 80 Litre container - triple row 901.505.142 3378Kg26 x 80 Litre container - triple row 901.505.143 3509Kg27 x 80 Litre container - triple row 901.505.144 3640Kg28 x 80 Litre container - triple row 901.505.145 3782Kg29 x 80 Litre container - triple row 901.505.146 3913Kg30 x 80 Litre container - triple row 901.505.147 4044Kg31 x 80 Litre container - triple row 901.505.148 4181Kg32 x 80 Litre container - triple row 901.505.149 4312Kg33 x 80 Litre container - triple row 901.505.150 4444Kg34 x 80 Litre container - triple row 901.505.151 4580Kg35 x 80 Litre container - triple row 901.505.152 4711Kg36 x 80 Litre container - triple row 901.505.153 4842Kg37 x 80 Litre container - triple row 901.505.154 4988Kg38 x 80 Litre container - triple row 901.505.155 5119Kg39 x 80 Litre container - triple row 901.505.156 5250Kg40 x 80 Litre container - triple row 901.505.157 5386Kg41 x 80 Litre container - triple row 901.505.158 5518Kg42 x 80 Litre container - triple row 901.505.159 5649Kg43 x 80 Litre container - triple row 901.505.160 5785Kg44 x 80 Litre container - triple row 901.505.161 5917Kg45 x 80 Litre container - triple row 901.505.162 6048Kg46 x 80 Litre container - triple row 901.505.163 6190Kg47 x 80 Litre container - triple row 901.505.164 6321Kg48 x 80 Litre container - triple row 901.505.165 6452Kg49 x 80 Litre container - triple row 901.505.166 6589Kg50 x 80 Litre container - triple row 901.505.167 6720Kg51 x 80 Litre container - triple row 901.505.168 6851Kg52 x 80 Litre container - triple row 901.505.169 6988Kg53 x 80 Litre container - triple row 901.505.170 7119Kg54 x 80 Litre container - triple row 901.505.171 7250Kg55 x 80 Litre container - triple row 901.505.172 7396Kg56 x 80 Litre container - triple row 901.505.173 7527Kg57 x 80 Litre container - triple row 901.505.174 7658Kg58 x 80 Litre container - triple row 901.505.175 7794Kg59 x 80 Litre container - triple row 901.505.176 7925Kg60 x 80 Litre container - triple row 901.505.177 8057Kg

KITS - Solenoid Operated

ext2.qxd 13/02/01 17:00 Page 13

tyco Fire &Security


Product Code300.205.001FM200

FM200 Equipment & Components - Standard

Agent

FM200 systems are configured around a range ofcontainers specifically charged with theappropriate quantity of FM200. Containers aremanufactured to meet the requirements of British,European or US D.O.T. standards as follows:Applicable StandardsBS5045 Part 2 - WeldedEEC/84/525 - SeamlessEEC/84/527 - WeldedDOT 4BW 500/DOT 4BW (HSE) 34.5 - Welded

* Containers manufactured to BS5045 Part 2 willbe supplied if available. Where these are notavailable an alternative (EEC or DOT) will besupplied as appropriate.

FM200 Containers - LPCB Approved

FM200 (HFC 227ea) is known chemically asHeptafluoropropane. FM200 is a colourless gaswhich is liquified under pressure for storage. LikeHalon 1301 it has a low toxicity level and is super-pressurised with Nitrogen to 24.8bar (360psi). Itrapidly extinguishes most commonly found firesthrough a combination of chemical and physicalmechanisms.

FM200 contains no bromine or chlorine andtherefore has zero Ozone Depleting Potential(ODP). The atmospheric lifetime of FM200 isbetween 31 and 42 years which along with its’ODP presents a long term solution to fireprotection requirements.FM200 has been found to be less toxic than Halon1301, which makes it safe for use in the fullyautomatic mode in occupied areas.

Typically FM200 requires a design concentrationof 7.5%, which is well below the 9% NoObservable Adverse Effect Level (NOAEL). TheNOAEL for Halon 1301 is only 5% (the same asthe design concentration).

Container Dia (mm) Ht to Valve Outlet Tare Weight Max FM200Size (l) (A) (mm) (B) (Kg) Weight (Kg)6.5 (BS) 222 300 9 6.56.5 (EC) 222 335 9 6.58 254 304 15 813 (BS) 222 495 12 1313 (EC) 222 520 12 1316 254 502 19 1625.5 (BS/EC) 222 830 17 25.532 254 833 26 3240 267 975 65 4052 (BS) 406 580 49 5252 (EC) 406 605 49 5252 (DOT) 406 595 49 5280 267 1785 108 80106 (BS) 406 1021 72 106106 (EC) 406 1040 72 106106 (DOT) 406 1020 72 106147 (BS) 406 1354 90 147147 (EC) 406 1370 90 147147 (DOT) 406 1360 90 147180 (BS) 406 1634 106 180180 (DOT) 406 1640 106 180

All dimensions/tare weights are approximate due to manufacturing tolerances

FM200 Container Assembly

Container Size Diameter BS5045 Pt.2* EEC/84/525 EEC/84/527 DOT6.5 Litre 222 mm 303.205.001 n/a 303.205.009 n/a8 Litre 254 mm n/a n/a n/a 303.205.01513 Litre 222 mm 303.205.002 n/a 303.205.010 n/a16 Litre 254 mm n/a n/a n/a 303.205.01625.5 Litre 222 mm 303.205.003 n/a 303.205.011 n/a32 Litre 254 mm n/a n/a n/a 303.205.01740 Litre 267 mm n/a 303.205.025 n/a n/a52 Litre 406 mm 303.205.004 n/a 303.205.012 303.205.01880 Litre 267 mm n/a 303.205.024 n/a n/a106 Litre 406 mm 303.205.005 n/a 303.205.013 303.205.019147 Litre 406 mm 303.205.006 n/a 303.205.014 303.205.020180 Litre 406 mm 303.205.007 n/a n/a 303.205.021

FM200 Container Label

ext2.qxd 13/02/01 17:01 Page 14

tyco Fire &Security


The solenoid actuator is used to electricallyoperate the container valve and is operated at24Vd.c. (Power Consumption - 4.8 Watts).It is fitted directly onto the top of the containervalve by means of a knurled swivel couplingwhich enables the unit to be positioned aspreferred for electrical connection.When fitting it is only necessary for the unit to behand tight.The solenoid actuator is normally fitted to thecontainer designated as the ‘Master’. Theactuator is an electro-mechanical device whichwhen energised causes the central pin to move

downwards opening the schrader valve in thecontainer valve.The central pin must be in the retracted positionbefore the solenoid actuator is fitted, otherwisethe container valve will be operated and thecontents discharged.The power lead fitted with a DIN plug forconnecting to the solenoid is to be orderedseparately (P/C 304.001.001).

Product Code304.205.00124V Solenoid actuator

Solenoid Actuator - Standard

The Flameproof solenoid actuator is BASEEFAapproved to Ex d IIB requirements and isoperated at 24Vd.c. (Power Consumption - 11.2Watts).The CENELEC/BASEEFA Approved Explosionproof version is available to order to meet EEx dIIC requirements.The solenoid actuator is fitted to a schraderassembly on the side of the valve body by meansof a brass swivel nut. It is designed to beremovable from the schrader assembly. As therewill be pressure in the brass swivel nut, uponremoval of the solenoid the pressure will bereleased. A ‘pop’ will be heard at the time ofremoval. It is essential that the schrader assembly

is not dislodged or removed as this will cause animmediate and potentially hazardous discharge ofFM200. It is recommended that at the time ofremoval all slave containers are disconnectedfrom the ‘Master’.NOTE: Earlier versions of this actuator were notdesigned to be removable from the containervalve and no attempt must be made to do sowhilst the container is pressurised, otherwise thiswill result in immediate and potentially hazardousdischarge of FM200.

Product Code304.205.00224V Solenoid actuator (BASEEFA)

Solenoid Actuator - Flameproof

The local manual actuator is used to mechanicallyoperate the system at the container position.When fitting it is only necessary for the unit to behand-tight.Accidental manual release is prevented by meansof a steel safety pin. The steel safety pin must beremoved to allow the use of the local manualactuator.After removing the safety pin, manual operation iscaused by depressing the strike knob.

The unit is designed so that it may be fitteddirectly onto the top of the container

Product Code304.205.003Local manual actuator

Local Manual Actuator

Product Code304.001.001Solenoid lead

FM200 Solenoid Lead

Union AdaptorThe union adaptor is used to enable pipework tobe easily connected to and disconnected fromthe FM200 container valve outlet adaptor. It isavailable in two sizes, 25mm and 50mm.One end is provided with a parallel female threadto provide a compatible joint to the containeroutlet adaptor. The other end is provided with afemale NPT thread to enable pipework to beconnected. A swivel joint makes disconnecting

containers from the pipework straightforward.It is recommended that the joint to the containervalve adaptor is made using PTFE tape.

Product Codes309.002.01125mm (1”) Union adaptor309.002.01250mm (2”) Union adaptor

The pneumatic actuator is used where containeroperation is required by means of gas pressurefrom the system master container, remote manualrelease unit or from a pilot container. When fittingit is only necessary for the unit to be hand tight.The unit is designed so that it may be fitteddirectly onto the top of the container valve or beused in conjunction with a solenoid actuator, inwhich case it fits directly on top of the solenoidactuator.

A minimum pressure of 4 bar is required toensure satisfactory operation.Connection to the actuator is 1/4” B.S.P.


Pneumatic Actuator

ext2.qxd 13/02/01 17:02 Page 15

tyco Fire &Security


The Pressure Switch is normally mounted on aconnection in the pneumatic actuation tubing andmay be used to provide an electrical indication ofrelease of FM200 or to perform ventilation shut-downs or other interlock functions.The pressure switch requires to be manually resetfollowing operation.A minimum pressure of 3 bar is required toensure satisfactory operation. Connection to thepressure switch may be either 1/2” NPT (male) or1/8” NPT (female).

Product Code305.205.002Gas released pressure switch

Pressure Switch - Standard

The Flameproof Pressure Switch is BASEEFAApproved to meet Ex d IIB requirements.The Pressure Switch requires to be manuallyreset following operation.A minimum pressure of 2 bar is required toensure satisfactory operation. Connection to thepressure switch is 1/4” NPT (female).A CENELEC/BASEEFA approved explosion proofversion is available to order to meet EEx d IICrequirements.

Product Code305.205.003Gas released pressure switch (BASEEFA)

Pressure Switch - Flameproof

The Supervisory Pressure Switch is an optionalitem that is factory fitted at the time of order andis used to continuously monitor the containerpressure.In the event of the container pressure fallingbelow 18 bar the switch will operate to provide anelectrical signal.The operating pressure is factory set and noadjustments may be carries out on site.

Product Code305.205.001Supervisory pressure switch

Supervisory Pressure Switch

The T528 Manual Release Unit is used whereremote mechanical manual release of the FM200system is required.The unit comprises of a box with a hinged yellowlid which is held in the closed position by twofrangible washers. Inside the unit is a red barwhich is to be connected to a wire rope runthrough a system of conduit and corner pulleys tothe Remote Manual Actuator.Operation of the FM200 system using the T528 isa two stage action. Firstly the hinged lid is pulleddownwards towards the operator. This action willbreak the frangible washers and expose the redoperating bar. System operation is caused bypulling hard on the red bar. System discharge willoccur immediately.


Product Code526.001.018T528 Mechanical manual release unit

T528 Manual Release Unit

The Remote Manual Actuator may be used tooperate the FM200 container from a remoteposition using the T528 mechanical manualrelease unit which is connected to the remotemanual actuator by wire rope run in conduit.A shear strap is fitted to help guard againstaccidental release. Operation is caused bymoving the lever through 90o, which will break theshear strap. The steel safety pin will preventoperation and is to be removed uponcommissioning of the system.

A pneumatic actuation port is provided to allowthe unit to double as a manual and pneumaticactuator.The unit is designed so that it may be fitteddirectly onto the top of the container valve or beused in conjunction with a solenoid actuator, inwhich case it fits directly on top of the solenoidactuator. When fitting it is only necessary for theswivel nut to be hand tightened.Product Code304.205.005Remote manual actuator (mechanical)

Remote Manual Actuator (Mechanical)

ext2.qxd 13/02/01 17:02 Page 16

tyco Fire &Security


The Discharge Nozzles are available in a 180o and360o pattern and are designed to uniformlydistribute FM200 throughout the hazard area. The 180o type has seven ports and the 360o typehas eight ports.For Pre-Engineered systems the nozzles areavailable pre-drilled in three sizes.Engineered nozzles are available in seven sizesand are drilled with the specific designrequirement.

Where the size of any hazard enclosuredetermines that one nozzle does not providesufficient coverage the hazard should betheoretically sub divided into appropriately sizedmodules.Nozzles are provided in aluminium as standard,but are available in brass or stainless steel toorder.

FM200 Nozzles - Engineered: Aluminium

NOZZLE TYPE PRODUCT CODEPre-Engineered Engineered

10mm (180o) Not Available 310.205.02215mm (180o) Not Available 310.205.01120mm (180o) Not Available 310.205.02425mm (180o) 310.205.001 310.205.01232mm (180o) Not Available 310.205.02640mm (180o) 310.205.003 310.205.01350mm (180o) 310.205.005 310.205.01410mm (360o) Not Available 310.205.02315mm (360o) Not Available 310.205.01520mm (360o) Not Available 310.205.02525mm (360o) 310.205.002 310.205.01632mm (360o) Not Available 310.205.02740mm (360o) 310.205.004 310.205.01750mm (360o) 310.205.006 310.205.018

180o Nozzle

360o Nozzle

9 metres

9 metres

Nozzle Coverage

Thread Size 10mm NPT 15mm NPT 20mm NPT 25mm NPT 32mm NPT 40mm NPT 50mm NPTA 25.0mm 29.0mm 35.0mm 41.0mm 50.0mm 60.0mm 76.0mmB 33.5mm 41.0mm 47.0mm 52.0mm 62.0mm 68.0mm 89.0mm

Discharge Nozzles

A BASEEFA Approved Supervisory PressureSwitch (P/C 305.205.004) is available to meet theEx d IIB requirements.A CENELEC/BASEEFA Approved explosion proofversion is available to order to meet EEx d IICrequirements.Both the Flameproof and Explosion proofversions are variations on the Flameproof andExplosion proof ‘gas discharged’ pressureswitches.It is recommended that the Flameproof andExplosion proof switches are wall mountedadjacent to the container.Connection to the switch is 1/4” NPT (female).

To fit the Flameproof or Explosion proof switchrequires connecting pneumatic actuation tubingbetween the supervisory pressure switch port onthe valve and the supervisory pressure switch.This process involves removing the plug from thesupervisory pressure switch port in the valve andquickly connecting the actuation tubing. Uponremoval of the plug it is normal for a smallquantity of gas to leak. It is critical that allconnections are gas tight otherwise the containerwill gradually lose its charge.Product Code305.205.004Supervisory pressure switch (BASEEFA)

Supervisory Pressure Switch - BASEEFA/CENELEC

The Container Brackets are designed to securelyfix a single container to a wall or supportingstructure.The brackets are of a design that allows them tobe wall mounted. They comprise of a steelcruciform section which is fixed to the wall orsupporting structure and a steel strap used tofirmly secure the container to the bracket. A lug atthe bottom of the vertical back section is used tosupport the weight of the container. The strap isfixed around the container to the horizontal backsection using nuts and bolts.

Product Codes311.205.0016.5 litre container bracket assembly311.205.00213 litre container bracket assembly311.205.00325.5 litre container bracket assembly

FM200 Container Brackets (Welded Containers) - 6.5/13/25.5 Litre

SEE DETAIL A

DETAIL A

PRESENT ONLYON BRACKETASSEMBLY311.205.003 HOLE DIA 11.5 (TYP)

6.5/13/25.5 LITRE CONTAINER BRACKET

PRODUCT CODE DIM A311.205.001 172311.205.002 375311.205.003 715

ext2.qxd 13/02/01 17:04 Page 17

tyco Fire &Security


Manifolds are designed to enable all thecontainers in a row to be connected to thesupply pipe and may be used in multi containerapplications or in main and reserve systems.All manifolds are pressure tested at the works to90 bar.All Product Code Numbers include the manifoldand Check Valves.

ManifoldsType Product Code

65mm x 2 port 307.205.01265mm x 3 port 307.205.01365mm x 4 port 307.205.01480mm x 2 port 307.205.00180mm x 3 port 307.205.00280mm x 4 port 307.205.00380mm x 5 port 307.205.011

100mm x 2 port 307.205.004100mm x 3 port 307.205.005100mm x 4 port 307.205.006100mm x 5 port 307.205.007100mm x 6 port 307.205.008150mm x 3 port 307.205.009150mm x 4 port 307.205.010150mm x 5 port 307.205.015150mm x 6 port 307.205.016150mm x 7 port 307.205.017150mm x 8 port 307.205.018150mm x 9 port 307.205.019150mm x 10 port 307.205.020

The Container Brackets are designed to securelyfix a single container to a wall or supportingstructure. The containers are to be floor mountedonly.The bracket assembly comprises a steel strap,steel channel section and two spring nuts andbolts.Product Code311.205.00452-180 litre container bracket assembly

FM200 Container Brackets (Welded Containers) - 52/106/147/180 Litre

52/106/147/180 LITRE CONTAINER BRACKET

The container brackets are designed to securelyfix a single container to a wall or supportingstructure. The containers are to be floor mountedonly.The bracket assembly comprises two steel straps,steel channel section (400mm long) and nut andbolt.

Product Code311.205.013Container brackets 8/16/32 litre containers

FM200 Container Brackets (Welded Containers) - 8/16/32 Litre

The bracket is designed to securely fix containersto a wall or supporting structure. It comprises of asection of steel channel and a universal clamp.The steel channel sections are fixed securely tothe wall or supporting structure. The universalclamp has a special slotted section which allowseach half to be fitted into the steel channel. Thetwo halves are clamped together in positionaround the container using a nut and bolt.

Product CodesSL 93841Container strap - 267mmSL 93852Single container wall rack

FM200 Container Brackets (Seamless Containers)

210

Manifold

65/80/100mm NPT (both ends)

50mm Check Valve

ext2.qxd 13/02/01 17:04 Page 18

tyco Fire &Security


Product Codes308.002.0016mm Kunifer tube308.002.0026mm Half hard copper tube309.010.0026mm x 1/8” NPT stud coupling309.010.0036mm x 1/4” NPT stud coupling309.011.0016mm Straight coupling309.013.0016mm Equal tee

FM200 Actuation Ancillaries

308.002.001

309.013.001

309.010.002

309.010.003

309.011.001

The Door Caution Plate (no lock-off) providesinstructions to personnel who may enter an areaprotected with FM200.This version of the caution plate is used when it ispermitted to leave the system on automaticcontrol even while the area is occupied.One plate is to be fixed to all entrance doors intoan FM200 protected area.Four 4mm fixing holes are provided.


Product Code314.205.002Door caution plate (no lock off)

Door Caution Plate - No Lock-Off

The Manual Release Caution Plate providesinstructions to personnel on the use of manualcontrols.One plate is to be fixed adjacent to all positionsfrom where FM200 can be released manually.Four 4mm fixing holes are provided.Technical SpecificationDimensions: 210 x 75 mm

Product Code314.205.003Manual release plate


The Door Caution Plate (lock-off) providesinstructions to personnel who may enter an areaprotected with FM200.This version of the caution plate is used when it isnecessary to instruct personnel to place thesystem on manual control before entering theprotected area.One plate is to be fixed to all entrance doors intoan FM200 protected area.Four 4mm fixing holes are provided.


Product Code314.205.001Door caution plate (lock off)

Door Caution Plate - Lock Off

The flexible Discharge Hose connects thecontainer to the check valve on the manifold.A swivel fitting at the end of the hose allows easeof installation.NOTE: The purpose of the 32mm hose is toprevent excessive pressure loss experiencedwhen using a 25mm hose from the 25mm FM200container valve. Connection to the 25mmcontainer valve is by means of a 32mm x 25mmadaptor included as part of the 32mm hoseassembly.

Product Codes306.205.00132mm flexible discharge hose306.205.00250mm flexible discharge hose

Discharge Hoses

Manifold support brackets are designed toprovide a firm fixing of the manifold to a wall orsupporting structure. Two brackets are requiredfor each manifold used.

Product Codes311.205.01565mm Manifold support bracket311.205.01080mm Manifold support bracket

311.205.011100mm Manifold support bracket311.205.012150mm Manifold support bracket

FM200 Manifold Support Brackets

ext2.qxd 13/02/01 17:05 Page 19

tyco Fire &Security



KITS - Master Containers (Solenoid Operated)In order to assist in the ordering of correctcomponents to form the FM200 system a numberof kits are available to cover the most popularrange of containers.Each kit comprises the FM200 container, bracket,

solenoid, solenoid lead, manual actuator,pressure switch, actuation tubing/fittings andmanual caution plate.The kit excludes items which are specific to aindividual enclosure such as FM200, supervisory

pressure switches, door caution plates, nozzles,pipework, fittings, fixings and any special itemssuch as distribution valves.

KITS - Slave Containers (Pneumatically Operated)Each kit comprises the FM200 container, bracket,pneumatic actuator and actuation tubing/fittingsand manual caution plate.The kit excludes items which are specific to anindividual enclosure such as FM200, supervisory

pressure switches, door caution plates, nozzles,pipework, fittings, fixings and any special itemssuch as distribution valves.

Description Kit No. Weight6.5 Litre Solenoid operated container assy 901.505.048 13 Kgs13 Litre Solenoid operated container assy 901.505.049 16 Kgs25.5 Litre Solenoid operated container assy 901.505.050 22 Kgs52 Litre Solenoid operated container assy 901.505.051 48 Kgs106 Litre Solenoid operated container assy 901.505.052 69 Kgs147 Litre Solenoid operated container assy 901.505.053 84 Kgs180 Litre Solenoid operated container assy 901.505.054 98 Kgs

KITS - Master Containers (Solenoid Operated)

Description Kit No. Weight6.5 Litre Pneumatically operated container assy 901.505.041 10 Kgs13 Litre Pneumatically operated container assy 901.505.042 14 Kgs25.5 Litre Pneumatically operated container assy 901.505.043 19 Kgs52 Litre Pneumatically operated container assy 901.505.044 46 Kgs106 Litre Pneumatically operated container assy 901.505.045 67 Kgs147 Litre Pneumatically operated container assy 901.505.046 82 Kgs180 Litre Pneumatically operated container assy 901.505.047 96 Kgs

KITS - Master Containers (Solenoid Operated)

Reference Description1 FM200 Container Assembly2 Container Bracket3 Container Nameplate4 Pressure Gauge5 Solenoid Actuator6 Local Manual Actuator6a Safety Pin7 Supervisory Pressure Switch*8 Pneumatic Actuator9 Pressure Switch10 Discharge Nozzle11 Manual Release Caution Plate12 Container Design Details13 Discharge Pipework14 Pneumatic Actuation Tubing15 Junction Box

* Optional or variable equipment - not included inthe standard kits.

ext2.qxd 13/02/01 17:05 Page 20

The solenoid actuator is fitted to a schraderassembly on the side of the valve body by meansof a brass swivel nut. It is designed to beremovable from the schrader assembly. As therewill be pressure in the brass swivel nut, uponremoval of the solenoid the pressure will bereleased. A ‘pop’ will be heard at the time ofremoval. It is essential that the schrader assemblyis not dislodged or removed as this will cause animmediate and potentially hazardous discharge ofFM200.

Product Code304.205.00824V Solenoid actuator (side mounted)

Solenoid Actuator - Side Mounted (UL)

Page 21

tyco Fire &Security


Product Code300.205.001FM200

FM200 Equipment & Components - UL ListedAgent

Systems are configured around a range ofcontainers specifically charged with theappropriate quantity of FM200. Containers aremanufactured to meet the requirements ofDOT4BW500 / DOT4BW(HSE)34.5.

Product Codes303.205.0158 Litre container assembly303.205.01616 Litre container assembly303.205.01732 Litre container assembly303.205.01852 Litre container assembly303.205.019106 Litre container assembly

303.205.020147 Litre container assembly303.205.021180 Litre container assembly

FM200 Containers - Dot (UL)

The solenoid actuator is used to electricallyoperate the container valve. The solenoid isoperated at 24Vd.c. (Power Consumption - 4.8Watts).It is fitted directly onto the top of the containervalve by means of a knurled swivel couplingwhich enables the unit to be positioned aspreferred for electrical connection.When fitting it is only necessary for the unit to behand tight.The solenoid actuator is normally fitted to thecontainer designated as the ‘Master’. Theactuator is an electro-mechanical device which

when energised causes the central pin to movedownwards opening the schrader valve in thecontainer valve.The central pin must be in the retracted positionbefore the solenoid actuator is fitted, otherwisethe container valve will be operated and thecontents discharged.The power lead fitted with a DIN plug forconnecting to the solenoid is to be orderedseparately (P/C 304.001.001).Product Code304.205.00824V Solenoid actuator

Solenoid Actuator - Stackable (UL)

The local manual actuator is used to mechanicallyoperate the system at the container position.When fitting it is only necessary for the unit to behand-tight.Accidental manual release is prevented by meansof a steel safety pin. The steel safety pin must beremoved to allow the use of the local manualactuator.After removing the safety pin, manual operation iscaused by depressing the strike knob.The unit is designed so that it may be fitteddirectly onto the top of the container

Product Code304.205.003Local manual actuator

Local Manual Actuator

Label fitted to containers on UL listed systems

ext2.qxd 13/02/01 17:06 Page 21

tyco Fire &Security


The container brackets are designed to securelyfix a single container to a wall or supportingstructure. The containers are to be floor mountedonly.The bracket assembly comprises two steel straps,steel channel section (400mm long) and nut andbolt.

Product Codes311.205.0138-32 litre Container bracket assembly311.205.01452-180 litre Container bracket assembly

FM200 Container Brackets (UL)

Product Codes306.205.003Flexible pilot hose 1/4” BSP swivel female309.013.003Male tee 1/4” BSPP x 1/4” BSPT309.013.004Male elbow 1/4” BSPT x 1/4” BSPP309.013.0051/4” BSPT x 1/4” BSPP adaptor

FM200 Actuation Ancillary (UL)

The Supervisory Pressure Switch is an optionalitem that is Factory fitted at the time of order andis used to continuously monitor the containerpressure.In the event of the container pressure fallingbelow 18 bar the switch will operate to provide anelectrical signal.The operating pressure is factory set and noadjustments may be carries out on site.

Product Code305.205.006Supervisory pressure switch

Supervisory Pressure Switch (UL)

The pneumatic actuator is used where containeroperation is required by means of gas pressurefrom the system master container, remote manualrelease unit or from a pilot container. When fittingit is only necessary for the unit to be hand tight.The unit is designed so that it may be fitteddirectly onto the top of the container valve or beused in conjunction with a solenoid actuator, inwhich case it fits directly on top of the solenoidactuator.A minimum pressure of 4 bar is required toensure satisfactory operation.Connection to the actuator is 1/4” B.S.P.


Solenoid Actuator - Pneumatic Actuator (UL)

309.013.005

309.013.003309.013.004

306.205.003

The Pressure Switch is normally mounted on aconnection in the pneumatic actuation tubing andmay be used to provide an electrical indication ofrelease of FM200 or to perform ventilation shut-downs or other interlock functions.The pressure switch requires to be manually resetfollowing operation.A minimum pressure of 3 bar is required toensure satisfactory operation. Connection to thepressure switch may be either 1/2” NPT (male) or1/8” NPT (female).

Product Code305.205.007Gas released pressure switch

Gas Released Pressure Switch (UL)

ext2.qxd 13/02/01 17:07 Page 22

tyco Fire &Security


The Discharge Nozzles are available in a 180o and360o pattern and are designed to uniformlydistribute FM200 throughout the hazard area. The 180o type has seven ports and the 360o typehas eight ports.Nozzles are available in seven sizes and aredrilled with the specific design requirement. Where the size of any hazard enclosuredetermines that one nozzle does not providesufficient coverage the hazard should betheoretically sub divided into appropriately sizedmodules.Nozzles are provided in brass as standard, butare available in stainless steel to order.

Product Codes310.205.02810mm x 180/360 Degree (state which)310.205.02915mm x 180/360 Degree (state which)310.205.03020mm x 180/360 Degree (state which)310.205.03125mm x 180/360 Degree (state which)310.205.03232mm x 180/360 Degree (state which)310.205.03340mm x 180/360 Degree (state which)310.205.03450mm x 180/360 Degree (state which)

FM200 Nozzles: Engineered: Brass (UL)

FM200 Manifolds (UL)

The flexible Discharge Hose connects thecontainer to the check valve on the manifold.A swivel fitting at the end of the hose allows easeof installation.NOTE: The purpose of the 32mm hose is toprevent excessive pressure loss experiencedwhen using a 25mm hose from the 25mm FM200container valve. Connection to the 25mmcontainer valve is by means of a 32mm x 25mmadaptor included as part of the 32mm hoseassembly.

Product Codes306.205.00132mm Flexible discharge hose306.205.00250mm Flexible discharge hose

Discharge Hoses

FM200 Manifold Support Brackets

Manifolds are designed to enable all thecontainers in a row to be connected to thesupply pipe and may be used in multi containerapplications or in main and reserve systems.All manifolds are pressure tested at the works to90 bar.All Product Code Numbers include the manifoldand Check Valves.

Type Product Code65mm x 2 port 307.205.01265mm x 3 port 307.205.01365mm x 4 port 307.205.01480mm x 2 port 307.205.00180mm x 3 port 307.205.00280mm x 4 port 307.205.00380mm x 5 port 307.205.011100mm x 2 port 307.205.004100mm x 3 port 307.205.005100mm x 4 port 307.205.006100mm x 5 port 307.205.007100mm x 6 port 307.205.008150mm x 3 port 307.205.009150mm x 4 port 307.205.010150mm x 5 port 307.205.015150mm x 6 port 307.205.016150mm x 7 port 307.205.017150mm x 8 port 307.205.018150mm x 9 port 307.205.019150mm x 10 port 307.205.020

Manifold

65/80/100mm NPT (both ends)

50mm Check Valve

Manifold support brackets are designed toprovide a firm fixing of the manifold to a wall orsupporting structure. Two brackets are requiredfor each manifold used.

Product Codes311.205.01565mm Manifold support bracket311.205.01080mm Manifold support bracket

311.205.011100mm Manifold support bracket311.205.012150mm Manifold support bracket

ext2.qxd 13/02/01 17:07 Page 23

tyco Fire &Security


The Door Caution Plate (no lock-off) providesinstructions to personnel who may enter an areaprotected with FM200.This version of the caution plate is used when it ispermitted to leave the system on automaticcontrol even while the area is occupied.One plate is to be fixed to all entrance doors intoan FM200 protected area.Four 4mm fixing holes are provided.Technical SpecificationDimensions: 210 x 210 mm

Product Code314.205.002Door caution plate (no lock off)

FM200 Door Caution Plate - No Lock-Off (UL)

The Door Caution Plate (lock-off) providesinstructions to personnel who may enter an areaprotected with FM200.This version of the caution plate is used when it isnecessary to instruct personnel to place thesystem on manual control before entering theprotected area.One plate is to be fixed to all entrance doors intoan FM200 protected area.Four 4mm fixing holes are provided.Technical SpecificationDimensions: 210 x 210 mm

Product Code314.205.001Door caution plate (lock off)

FM200 Door Caution Plate - Lock Off (UL)

The Manual Release Caution Plate providesinstructions to personnel on the use of manualcontrols.One plate is to be fixed adjacent to all positionsfrom where FM200 can be released manually.Four 4mm fixing holes are provided.Technical SpecificationDimensions: 210 x 75 mm

Product Code314.205.003Manual release plate

FM200 Manual Release Caution Plate (UL)

ext2.qxd 13/02/01 17:07 Page 24

The standard container is 67 Litre nominalcapacity with a 45Kg fill of Carbon Dioxide.Containers are manufactured to the EC directiveEEC/84/525 and the complete assembly consistsof:. CO2 Container. CO2 Valve & Syphon Tube. Valve Protection Cap. 45 Kgs CO2

The container valve is fitted with a burst disk rated to operate at 190 bar.Containers are painted signal red and are provided with a label providinghandling and maintenance instructions.Product Codes303.200.01145Kg Container assy complete with solenoid and CO2303.200.01245Kg Container assy complete with CO2

Carbon Dioxide Equipment & ComponentsContainers EC

Container DetailsWater Capacity 67.0 Litres (nominal)CO2 Capacity 45KgLength 1507mm +/- 10mmOutside Diameter 267mmMax. Working Pressure 194 BarTest Pressure 250 BarNominal Tare Weight 76.9KgNominal Gross Weight 122Kg

The Local Manual/Pneumatic Actuator may beused to operate the CO2 container by means of alocal mechanical action or by pneumatic means.The actuator is fitted directly onto the top of thecontainer valve and is retained by a steel locatingclip. A grub screw in the front of the containervalve may be tightened to secure the actuator inthe preferred orientation.

Accidental manual release is prevented by meansof a steel safety pin. The steel safety pin must beremoved to allow the use of the operating lever.After removing the safety pin manual operation iscaused by moving the operating lever through105o.A maximum force of approximately 3kgf isrequired to operate the actuator.Pneumatic operation is possible by means ofactuation ports in the main body of the actuator.At normal storage conditions ie 20oCapproximately 8.5 bar is required.Two ports are provided at 180o to each other. Oneport is used as an inlet port and the other as anoutlet port. Interconnection between adjacentactuators is by means of 3/16” pilot hoses. (Eitherport can be used as the inlet/outlet ports). Noport must be left open ie. depending on thelayout required, manual bleed valves, pilot hosesor pneumatic actuation plugs may be fitted. To

connect the 3/16” pilot hose to the inlet/outletports of the actuator requires the use of 3/16” x1/8” adaptor (P/C 309.017.005). These adaptorsmust not be omitted as this could cause thesystem operation to fail. For remote manualactuation the actuator is fitted with a shear strapin place of the steel safety pin. This must bespecified at time of order.When operated the actuator latches to keep thecontainer valve open. The knurled reset plungermust be pulled to reset the actuator afteroperation.Technical SpecificationNet Weight: 0.4Kg

Product Code302.200.026Manual/pneumatic actuator

Local Manual/Pneumatic Actuator (Type D)

The Pneumatic Actuator may be used to operateslave containers by means of pressure from apilot container or from the system mastercontainer.The actuator is fitted directly onto the top of the

container valve and is retained by a steel locatingclip. A grub screw in the front of the containervalve may be tightened to secure the actuator inthe preferred orientation.Pneumatic operation is through actuation ports inthe main body of the actuator. A minimumoperating pressure of 31 bar is required at acontainer pressure of 200 bar. At normal storageconditions ie. 20oC approximately 8.5 bar isrequired.Two ports are provided at 180o to each other. Oneport is used as an inlet port and the other as anoutlet port. Interconnection between adjacentactuators is by means of 3/16” pilot hoses (Eitherport can be used as the inlet/outlet ports). Noport must be left open ie. depending on the

layout required, manual bleed valves, pilot hosesor pneumatic actuation plugs may be fitted. Toconnect the 3/16” pilot hose to the inlet/outletports of the actuator requires the use of 3/16” x1/8” adaptor (P/C 309.017.005). These adaptorsmust not be omitted as this could cause thesystem operation to fail.When operated the actuator latches to keep thecontainer valve open. The knurled reset plungermust be pulled to reset the actuator afteroperation.Technical SpecificationNet Weight: 0.3KgProduct Code302.200.027Double slave actuator

Pneumatic Actuator (Type D)

The 374mm Pilot Hose is used to take pilotpressure from one pneumatic actuator to the nextin the container bank.The 527mm Pilot Hose is used to take pilotpressure from the type D check valve to the firstslave container in the container bank and alsobetween the end actuators of the front and backrow on double row systems.NOTE: Adaptors are required to correctly connectthe hoses to the local manual/pneumatic actuatoror pneumatic actuator.

Each end is fitted with a 3/16” Enots (male) swivelfitting. A minimum bend radius of 75mm must beallowed.Technical SpecificationNet Weight: 0.04Kg (374mm)

0.05Kg (527mm)Product Codes306.200.0033/16” x 527mm Pilot hose306.200.0043/16” x 374mm Pilot hose

PIlot Hoses (527mm & 374mm)

306.200.003

306.200.004

tyco Fire &Security


ext2.qxd 13/02/01 17:07 Page 25

tyco Fire &Security


The Manifold Check Valve allows for thetemporary removal of a container from the systemand is the means to connect the flexibledischarge hose to the manifold. It may also beused as an adaptor between the pipework andthe end of the flexible discharge hose on singlecontainer systems.The manifold check valve is not designed to givecomplete sealing, but will prevent a substantialloss of CO2 should the system discharge with a

container removed. The check valve is designedfor use in the vertical position and one checkvalve is used for each container connected to themanifold.Technical SpecificationNet Weight: 0.1Kg

Product Code302.200.014Manifold check valve

Manifold Check Valve

A variety of pneumatic actuation fittings areavailable to connect the various actuation hosesand devices.Product Codes309.017.0043/16” x 1/4” Adaptor309.017.0053/16” x 1/8” Adaptor309.005.0093/16” Nipple

Pneumatic Actuation Fittings

The Manual Vent Valve serves two functions.Firstly, it acts to relieve a gradual pressure buildup occurring, perhaps as a result of a leakingpilot container, master container or solenoid.Secondly, it provides a means by which pressuretrapped in the actuation circuits may be manuallyrelieved.The manual vent valve relieves automatically upto a pressure of approximately 2 bar and seals atpressures above this.Pressure is relieved manually by pulling theknurled reset plunger.

Connection to the local manual/pneumaticactuator requires the use of one 3/16” x 1/4” BSPadaptor (P/C 309.017.004), one of 3/16” nipple(P/C 309.005.009) and one 3/16” x 1/8” BSPadaptor (P/C 309.017.005).Technical SpecificationNet Weight: 0.12Kg

Product Code302.200.021Manual vent valve

Manual Vent Valve

The Pilot Non Return Valve is designed to allowCO2 pressure into various parts of the pneumaticactuation system, but prevent that pressure frombeing lost when the source pressure diminishes.It is essential that it is fitted the correct wayround, otherwise the system may not operate.

Technical SpecificationNet Weight: 0.02KgThread Size: 3/16” Enots (male)

Product Code302.200.015Pilot line non return valve

Pilot Line Non Return Valve

The type D manifold check valve has a dualfunction and is generally used with the mastercontainer to permit operation of slave containers.Its first function is that of the standard manifoldcheck valve and its second is to provide aconnection from which CO2 pressure may betapped to pneumatically operate slave containers.Product Code302.200.020Type D manifold check valve

Manifold Check Valve (Type D)

The 1/2" flexible discharge hose connects thecontainer valve outlet to the check valve on themanifold and is sufficiently flexible toaccommodate the small variations found incontainer heights. Swivel female couplings allowease of installation in any orientation.Technical SpecificationNet weight 0.85 kgs.

Product Code306.200.00515mm Discharge hose

Discharge Hose

309.017.004 309.017.005

309.005.009

ext2.qxd 13/02/01 17:08 Page 26

tyco Fire &Security


The CO2 manifold is designed to enable all thecontainers in a row to be connected to the supplypipe.The standard manifolds are for 2, 3, 4 or 5containers and are available in two sizes, 25mm(1”) and 32mm (1 1/4”). The manifolds may bejoined using sockets or tees to produce any

configuration to suit any number of containers ona system.Non-standard sizes may be produced to order.All manifolds are galvanised inside and out andpressure tested to 190 bar.

CO2 ManifoldsProduct Code Description Weight307.200.009 25mm (1”) x 2 Point Manifold 2.5Kg307.200.010 25mm (1”) x 3 Point Manifold 3.5Kg307.200.011 25mm (1”) x 4 Point Manifold 4.5Kg307.200.012 25mm (1”) x 5 Point Manifold 5.5Kg307.200.013 32mm (1 1/4”) x 2 Point Manifold 3.0Kg307.200.014 32mm (1 1/4”) x 3 Point Manifold 4.0Kg307.200.015 32mm (1 1/4”) x 4 Point Manifold 6.0Kg307.200.016 32mm (1 1/4”) x 5 Point Manifold 7.4Kg

The Odouriser 2000 is designed to give adistinctive small to the CO2 and is particularlyuseful in basements or low lying areas in thevicinity of the system or any place where CO2could drift to following a discharge.Liquid citrus odour is contained in the body of theodouriser and is sealed in by a lead disc.Pressure of the discharging CO2 causes the discto rupture and allows the liquid to escape and mixwith the CO2. One type odouriser is used for

each 2000Kg of CO2. The odouriser must bereplaced after each operation of the system.Connection to the pipework is 1/2” A.P.I. (male).Technical SpecificationNet Weight: 0.275Kg

Product Code305.200.003Odouriser

Odouriser 2000

The Pressure Operated Distribution Valve isdesigned to be used as a safety stop valve or asa distribution / selector valve.The valve may be operated either via pilotpressure or manually through handwheeloperation.A pressure of approximately 11 bar is required toopen the valve and keep it open. Removal of thepilot pressure from the valve will allow it to closeand depending on the requirements it may be

necessary to lock the pressure in. The valve isprovided with switches as standard to provide asignal to confirm operation of the valve. Sizes20mm to 50mm are provided with NPT screwedconnections. Sizes 80mm to 150mm are availableto order and are provided with flangedconnections. The actuation port is 1/8” A.P.I.

Pressure Operated Distribution Valve

Valve Sizes Product Code20mm (3/4”) 302.200.02825mm (1”) 302.200.02932mm (1 1/4”) 302.200.03040mm (1 1/2”) 302.200.03150mm (2”) 302.200.03280mm (3”) 302.200.033100mm (4”) 302.200.034150mm (6”) 302.200.035

The ‘S’ Type Nozzle is used in most total floodingapplications. It is normally recommended that thenozzles are uniformly positioned on the ceiling ofan enclosure to ensure a satisfactory distributionof CO2. Where it is not practical to position thenozzles on the ceiling, it may be acceptabledepending on the room dimensions to positionthem around the perimeter at high level.For CO2 total flooding systems there are no strict

rules governing the number of nozzles thatshould be applied to any type of hazard, however,nozzle spacing is dependent on the room height,flow rate, potential obstructions etc., but as a ruleof thumb, the nozzle may be used to cover anarea of approximately 30 square metres in a room3 metres high, the nozzle coverage table providesadditional guidance. In order to reduce the possibility of the nozzleorifice becoming blocked during discharge,terminal nozzles should be installed in a tee and ashort length of pipe (100mm) capped/pluggedshould be fitted to act as a dirt trap.

Technical SpecificationNet Weight: 0.135KgFinish: Satin ChromeConnection to the pipework is 15mm (1/2”) NPT(female).

Product Code310.200.001Type ‘S’ nozzle 15mm (1/2”) (Code 3-18)Orifice codes must be stated at the time of order.

‘S’ Type NozzleEnclosure Height Nozzle Coverage

3.6m 15m2

3.3m 20m2

3.0m 30m2

2.7m 40m2

2.4m 50m2

2.1m 60m2

1.8m 70m2

1.5m 80m2

1.2m 90m2

1.0m 100m2

ext2.qxd 13/02/01 17:08 Page 27

tyco Fire &Security


The racking is designed to securely fix a singlecontainer to a wall or supporting structure. Itcomprises of two sections of steel channel andtwo pairs of universal clamps.The steel channel sections are fixed securely tothe wall or supporting structure. The universalclamps have a special slotted section whichallows each half to be fitted into the steel channel.The two halves are clamped together in positionaround the container using a nut and bolt.


Product Code311.006.015Container bracket assy (single container)

Container Racking - Single Container

The racking is designed to securely fix a singlerow of containers to a wall or supportingstructure. It comprises of two sections of steelchannel and two pairs of universal clamps foreach container used.Additional containers may be racked using anynumber or configuration of the two and threecontainer racking assemblies.Technical SpecificationNet Weight: 5.5Kg ( Two containers)

8.5Kg (Three containers)

Product Codes311.006.011Container bracket assy (single row 2 cont.)311.006.012Container bracket assy (single row 3 cont.)

Container Racking - Two/Three Containers - Single Row

The fog nozzle is a discharge horn designed toproject CO2 in the direction of the fire hazard.CO2 is discharged in the form of a mist or fogand the discharge velocity is relatively low, thusmaking it suitable for use in local applicationsystems particularly where flammable liquids areinvolved and there could be a danger ofsplashing from the impingement of CO2.Nozzle positioning is dependent on the type ofhazard, the method employed in calculating theCO2 quantity, the nozzle height and flow required.Connection to the pipework is 20mm (3/4”) NPT(male).

Product Code 310.200.007 describes a two holeversion of the nozzle (Orifice Code 3 only) andProduct Code 310.200.008 describes a four holeversion (Orifice Codes 3.5 to 18).Technical SpecificationNet Weight: 0.46Kg

Product Codes310.200.007Fog nozzle (code 3 only)310.200.008Fog nozzle (code 3.5-18)

Fog Type Nozzle

The Duct Nozzle is a variation on the fog typenozzle. It is provided with facilities to incorporatea flanged mounting plate and one of two types ofburst disc - an internal (P/C 310.200.011) orexternal (P/C 310.200.012) type.The flanged mounting plate permits the nozzle tobe mounted on the outside of trunking or steelenclosures.The burst discs are designed to prevent theingress of dirt, insects or other particulate matterwhich could at some stage block the nozzle.Connection to the pipework is 20mm (3/4”) NPT(male).

Product Code 310.200.009 describes a two holeversion (Orifice Code 3 Only) and Product Code310.200.010 describes a four hole version (OrificeCodes 3.5 to 18).Technical SpecificationNet Weight: 1.1Kg

Product Codes310.200.009Duct nozzle (code 3 only)310.200.010Duct nozzle (code 3.5-18)

Duct Type Nozzle

The Manual By-Pass Valve is used to allow CO2to be safely vented to atmosphere if it becomestrapped within a closed pipework section. Thevalve is available as standard in 15mm (1/2”) NPT.The valve is used in the normally closed positionand is provided with a locking bracket into whicha standard padlock may be fitted.Technical SpecificationNet Weight: 0.25Kg

Product Code302.001.00815mm (1/2”) Manual ball valve

Manual By-Pass Valve

Manual Stop Valves are used to isolate the supplyof CO2, (usually at the container manifoldlocation), from the discharge pipework.The valves and are each fitted with a switchbox toenable an indication of ‘valve open’ or ‘valve

closed’ to be given. The valves are also providedwith a locking bracket into which a standardpadlock may be fitted. Other sizes are available toorder.

Manual Stop Valves - Lockable/ContactedProduct Code Description Weight302.200.016 15mm (1/2”) Manual locking valve and switches 1.2Kg302.200.017 20mm (3/4”)Manual locking ball valve and switches 1.42Kg302.200.018 25mm (1”) Manual locking ball valve and switches 1.6Kg302.200.019 32mm (1 1/4”) Manual locking ball valve and switches 1.75Kg

ext2.qxd 13/02/01 17:09 Page 28

tyco Fire &Security


The racking is designed to securely fix a doublerow of containers to a wall or supportingstructure. It comprises mainly of four sections ofsteel channel (two double and two single), anumber of sections of threaded rod and two pairsof universal clamps for each container used. Theuniversal clamps for the back row of containersare specially rounded to allow the double channelto fit over them.Two sections of steel channel are fixed securelyto the wall or supporting structure. Universalclamps are fitted into the steel channel aroundthe back row of containers.A second (double) steel channel is secured inposition over the ends of the universal clampsusing the threaded rod. The front row of

containers are racked to the double steel channeland secured using universal clamps.Additional containers may be racked using anynumber or configuration of the two and threecontainer racking assemblies.Technical SpecificationNet Weight: 16.0Kg (Four container)

19.3Kg (Six container)

Product Codes311.006.013Container bracket assy (double row 4 cont.)311.006.014Container bracket assy (double row 6 cont.)

Container Racking - Four/Six Containers Double Row

The Manual Release Caution Plate providesinstructions to personnel on the use of manualcontrols.One plate is to be fixed adjacent to all positionswhere CO2 can be released manually.An English/Arabic version is also available.Technical SpecificationNet Weight: 0.035Kg (English)

0.07Kg (English/Arabic)

Product Codes314.200.001Manual release plate (English)314.200.006Manual release plate (English/Arabic)


The Door Caution Plate provides instructions topersonnel who may enter a CO2 protected area.One plate is to be fixed to all entrance doors intoa CO2 protected area.An English/Arabic version is also available (P/C314.200.005).Technical SpecificationNet Weight: 0.085Kg English)

0.17Kg (English/Arabic)

Product Codes314.200.002Door caution plate (English)314.200.005Door caution plate (English/Arabic)

Door Caution Plate

The nitrogen pilot container is designed to beused in systems that require pilot containeroperation of slave containers, and is designed,manufactured and marked in accordance withBS5045 Part 6.Connection from the pilot container to thepneumatic actuators on the CO2 container maybe made using either the 527mm or 374mm pilothose. The actuation port thread size is 3/16”Enots.The nitrogen pilot container may be operatedeither by solenoid (product code 304.200.013),local manual/pneumatic actuator (product code304.200.011), remote manual/pneumatic actuator(product code 304.200.015) or the pneumatic

actuator (product code 304.200.012).A pressure gauge and supervisory switch arefitted as standard. The supervisory pressureswitch is designed to provide a signal when thecontainer pressure falls below 100 bar.Note: It is a requirement of the British Standardthat the contents are monitored or alternativelyduplicate pilot container must be provided.Technical SpecificationContacts: single pole changeoverContainers are painted greyNet Weight: 3.2 KgsProduct Code300.203.003N2 Pilot container complete with gauge and S.P.S.

N2 Pilot Container Complete with Gauge and S.P.S.

The solenoid actuator is used to electricallyoperate the container valve. The actuator is fittedwith a manual release button to allow localmanual release. The standard solenoid is

operated at 24Vd.c. (max. current consumption1.3A). A 240Va.c. version is available to specialorder.The solenoid actuator is fitted directly on to thetop of the container valve or pilot cylinder bymeans of a swivel coupling, which enables theunit to be positioned as preferred for electricalconnection. It is to be fitted as tight as possibleby hand and then tightened up with a wrench toprovide a gas tight seal.The solenoid actuator is a spring loaded devicewhich when armed holds a plunger away from thecontainer valve operating shaft.An integral part of the solenoid actuator is amanual release button.Accidental release is prevented by means of asteel safety pin. The safety pin must not be

removed to allow the operation of the manualrelease button. After removing the safety pin,manual operation is caused by striking thebutton.When the solenoid is energised or the manualrelease button operating the plunger is releasedto open the valve.The solenoid requires to be manually resetfollowing operation, using the solenoid resettingtool. The plunger must be in the retractedposition before the solenoid is fitted otherwise thecontainer valve will be opened and the contentsdischarged. The plunger is approximately 7mmabove flush when fully retracted.Product Code304.200.013N2 Solenoid

Nitrogen Pilot Container Solenoid

SpringWasher

M12 Threaded Rod

Nut & Sq. Washer (Typ)

ext2.qxd 13/02/01 17:10 Page 29

tyco Fire &Security


Product Codes302.001.00815mm (1/2”) Manual ball valve302.001.00920mm (3/4”) Manual ball valve302.001.01025mm (1”) Manual ball valve

CO2 Manual Ball Valves

Product Codes311.002.0111” Universal pipe clamp311.002.0121 1/4” Universal pipe clamp311.003.012Cantilever bracket x 450mm311.003.018Cantilever bracket x 600mm

CO2 Manifold System Parts

Product Codes302.200.009CO2 Male x 1/2” BSP female adaptor302.200.011CO2 Female x 1/2” BSP male adaptor

CO2 Ancillaries

The pressure trip is designed to pneumaticallyrelease drop curtains. A version of the pressuretrip is available to pneumatically operate selfclosing doors (Part No. 305.005.006). Thisversion is similar to the ‘curtain’ pressure tripexcept that a separate bracket is provided forfitting to the door or closing device and thewelded bracket is omitted.Connection to the pressure trip is by means of3/8" pipework from the system dischargepipework. The pressure trip is designed to beused in the horizontal plane.

Technical SpecificationNet weight: 1.5Kgs.

Product Code305.200.001Pressure trip

Pressure Trip

311.003.018

311.003.012

311.002.012

311.002.011

302.200.011

302.200.009

The T528 Manual Release Unit is used whereremote mechanical manual release of the CO2system is required.The unit comprises of a box with a hinged yellowlid which is held in the closed position by twofrangible washers. Inside the unit is a red barwhich is to be connected to a wire rope runthrough a system of conduit and corner pulleys tothe Remote Manual/Pneumatic Actuator.Operation of the CO2 system using the T528 is atwo stage action. The hinged lid is pulleddownwards towards the operator. This action willbreak the frangible washers and expose the red

operating bar. System operation is caused bypulling hard on the red bar. System discharge willoccur immediately.Technical SpecificationNet Weight: 0.9KgProduct Code526.001.018T528 Mechanical manual release unit526.001.018.AT528 Mechanical manual release unit(Unbranded)526.001.018.TT528 Mechanical manual release unit (Thorn)

T528 Manual Release Unit

ext2.qxd 13/02/01 17:10 Page 30

tyco Fire &Security


The CO2 Pressure Relief Valve is designed toautomatically relieve excess pressure in thepipework system. A valve is normally fitted in allclosed sections of pipework, i.e. between thecontainers and stop valves, etc. It is set to openat 146 bar ±5%. It is a requirement that the outletfrom the valve is piped to atmosphere away frompersonnel. A manual by-pass valve must beincorporated into the pressure relief arrangementsto allow for trapped CO2 to be safely vented toatmosphere.Technical SpecificationNet weight 1.0 kgs

Product Code302.200.008Pressure relief valve (146 bar)

CO2 Pressure Relief Valve


KITS - Solenoid / Manual Operation or Manual Operation OnlyIn order to assist in the ordering of the correctcomponents to form the CO2 container bank, arange of kits are available to cover the mostpopular combinations utilising single, double andtriple row arrangements.Each kit comprises the appropriate quantity of

CO2 containers, CO2 gas, racking, pressuregauges, solenoid, manual actuator, pneumaticactuators, odouriser, pressure switch, dischargehoses, actuation hoses/fittings,manifolds/fixings/fittings/support brackets andmanual caution plate.

The kits exclude items which are specific to anindividual enclosure, such as Door caution plates,Nozzles, Pipework, Fittings, Fixings and anyspecial items such as Distribution valves.

Reference Description Reference Description1 CO2 Container Assembly 10 Non Return Valve2 Container Racking 11 Manual Release Caution Plate3 Container Nameplate 12 Manual/Pneumatic Actuator4 Container Design Details 13 Pilot Hose5 Flexible Discharge Hose 14 Manifold6 Pneumatic Adaptor 15 Pneumatic Actuator7 Manifold Check Valve 16 Socket8 Odouriser 17 Plug9 Pressure Switch 18 Manual Bleed Valve

The metron actuator (DR2014/C6) is available asa service replacement component.

Product Code302.200.048Metron actuator

Metron Actuator

ext2.qxd 13/02/01 17:10 Page 31

tyco Fire &Security


Description Kit No. Weight1 x Container 901.500.816 129Kg2 x Container Single Row c/w 1” Manifold 901.500.817 261Kg3 x Container Single Row c/w 1” Manifold 901.500.818 389Kg4x Container Single Row c/w 1” Manifold 901.500.819 516Kg5 x Container Single Row c/w 1” Manifold 901.500.820 643Kg6 x Container Single Row c/w 1” Manifold 901.500.821 771Kg7 x Container Single Row c/w 1” Manifold 901.500.822 898Kg8 x Container Single Row c/w 1” Manifold 901.500.823 1025Kg9 x Container Single Row c/w 1” Manifold 901.500.824 1153Kg10 x Container Single Row c/w 1” Manifold 901.500.825 1279Kg11x Container Single Row c/w 1” Manifold 901.500.826 1409Kg12 x Container Single Row c/w 1” Manifold 901.500.827 1537Kg13 x Container Single Row c/w 1” Manifold 901.500.828 1664Kg14 x Container Single Row c/w 1” Manifold 901.500.829 1791Kg15 x Container Single Row c/w 1” Manifold 901.500.830 1918Kg16 x Container Single Row c/w 1” Manifold 901.500.831 2046Kg4 x Container Double Row c/w 1” Manifold 901.500.832 522Kg5 x Container Double Row c/w 1” Manifold 901.500.833 649Kg6 x Container Double Row c/w 1” Manifold 901.500.834 774Kg7 x Container Double Row c/w 1” Manifold 901.500.835 911Kg8 x Container Double Row c/w 1” Manifold 901.500.836 1035Kg9 x Container Double Row c/w 1” Manifold 901.500.837 1163Kg10 x Container Double Row c/w 1” Manifold 901.500.838 1287Kg11 x Container Double Row c/w 1” Manifold 901.500.839 1416Kg12 x Container Double Row c/w 1” Manifold 901.500.840 1541Kg13 x Container Double Row c/w 1” Manifold 901.500.841 1678Kg14 x Container Double Row c/w 1” Manifold 901.500.842 1802Kg15 x Container Double Row c/w 1” Manifold 901.500.843 1939Kg16 x Container Double Row c/w 1” Manifold 901.500.844 2064Kg17 x Container Double Row c/w 1” Manifold 901.500.845 2182Kg18 x Container Double Row c/w 1” Manifold 901.500.846 2306Kg19 x Container Double Row c/w 1” Manifold 901.500.847 2443Kg20 x Container Double Row c/w 1” Manifold 901.500.848 2567Kg2 x Container Single Row c/w 1 1/4” Manifold 901.500.849 263Kg3 x Container Single Row c/w 1 1/4” Manifold 901.500.850 391Kg4 x Container Single Row c/w 1 1/4” Manifold 901.500.851 518Kg5 x Container Single Row c/w 1 1/4” Manifold 901.500.852 646Kg6 x Container Single Row c/w 1 1/4” Manifold 901.500.853 774Kg7 x Container Single Row c/w 1 1/4” Manifold 901.500.854 902Kg8 x Container Single Row c/w 1 1/4” Manifold 901.500.855 1030Kg9 x Container Single Row c/w 1 1/4” Manifold 901.500.856 1158Kg10 x Container Single Row c/w 1 1/4” Manifold 901.500.857 1285Kg11 x Container Single Row c/w 1 1/4” Manifold 901.500.858 1415Kg12 x Container Single Row c/w 1 1/4” Manifold 901.500.859 1544Kg13 x Container Single Row c/w 1 1/4” Manifold 901.500.860 1670Kg14 x Container Single Row c/w 1 1/4” Manifold 901.500.861 1799Kg15 x Container Single Row c/w 1 1/4” Manifold 901.500.862 1926Kg16 x Container Single Row c/w 1 1/4” Manifold 901.500.863 2055Kg4 x Container Double Row c/w 1 1/4” Manifold 901.500.864 523Kg5 x Container Double Row c/w 1 1/4” Manifold 901.500.865 651Kg6 x Container Double Row c/w 1 1/4” Manifold 901.500.866 775Kg7 x Container Double Row c/w 1 1/4” Manifold 901.500.867 913Kg8 x Container Double Row c/w 1 1/4” Manifold 901.500.868 1039Kg9 x Container Double Row c/w 1 1/4” Manifold 901.500.869 1167Kg10 x Container Double Row c/w 1 1/4” Manifold 901.500.870 1291Kg11 x Container Double Row c/w 1 1/4” Manifold 901.500.871 1419Kg12 x Container Double Row c/w 1 1/4” Manifold 901.500.872 1544Kg13 x Container Double Row c/w 1 1/4” Manifold 901.500.873 1682Kg14 x Container Double Row c/w 1 1/4” Manifold 901.500.874 1807Kg15 x Container Double Row c/w 1 1/4” Manifold 901.500.875 1945Kg16 x Container Double Row c/w 1 1/4” Manifold 901.500.876 2071Kg17 x Container Double Row c/w1 1/4” Manifold 901.500.877 2189Kg18 x Container Double Row c/w 1 1/4” Manifold 901.500.878 2314Kg19 x Container Double Row c/w 1 1/4” Manifold 901.500.879 2452Kg20 x Container Double Row c/w 1 1/4” Manifold 901.500.880 2576Kg21 x Container Double Row c/w 1 1/4” Manifold 901.500.881 2707Kg22 x Container Double Row c/w 1 1/4” Manifold 901.500.882 2832Kg23 x Container Double Row c/w 1 1/4” Manifold 901.500.883 2961Kg24 x Container Double Row c/w 1 1/4” Manifold 901.500.884 3086Kg25 x Container Double Row c/w 1 1/4” Manifold 901.500.885 3224Kg26 x Container Double Row c/w 1 1/4” Manifold 901.500.886 3347Kg1 x Container 901.500.887 128Kg2 x Container Single Row c/w 1” Manifold 901.500.888 261Kg3 x Container Single Row c/w 1” Manifold 901.500.889 388Kg4 x Container Single Row c/w 1” Manifold 901.500.890 515Kg5 x Container Single Row c/w 1” Manifold 901.500.891 643Kg6 x Container Single Row c/w 1” Manifold 901.500.892 771Kg7 x Container Single Row c/w 1” Manifold 901.500.893 898Kg8 x Container Single Row c/w 1” Manifold 901.500.894 1025Kg

Description Kit No. Weight9 x Container Single Row c/w 1” Manifold 901.500.895 1152Kg10 x Container Single Row c/w 1” Manifold 901.500.896 1279Kg11 x Container Single Row c/w 1” Manifold 901.500.897 1409Kg12 x Container Single Row c/w 1” Manifold 901.500.898 1537Kg13 x Container Single Row c/w 1” Manifold 901.500.899 1663Kg14 x Container Single Row c/w 1” Manifold 901.500.900 1791Kg15 x Container Single Row c/w 1” Manifold 901.500.901 1918Kg16 x Container Single Row c/w 1” Manifold 901.500.902 2046Kg4 x Container Double Row c/w 1” Manifold 901.500.903 522Kg5 x Container Double Row c/w 1” Manifold 901.500.904 649Kg6 x Container Double Row c/w 1” Manifold 901.500.905 774Kg7 x Container Double Row c/w 1” Manifold 901.500.906 911Kg8 x Container Double Row c/w 1” Manifold 901.500.907 1035Kg9 x Container Double Row c/w 1” Manifold 901.500.908 1163Kg10 x Container Double Row c/w 1” Manifold 901.500.909 1287Kg11 x Container Double Row c/w 1” Manifold 901.500.910 1415Kg12 x Container Double Row c/w 1” Manifold 901.500.911 1541Kg13 x Container Double Row c/w 1” Manifold 901.500.912 1678Kg14 x Container Double Row c/w 1” Manifold 901.500.913 1802Kg15 x Container Double Row c/w 1” Manifold 901.500.914 1939Kg16 x Container Double Row c/w 1” Manifold 901.500.915 2063Kg17 x Container Double Row c/w 1” Manifold 901.500.916 2181Kg18 x Container Double Row c/w 1” Manifold 901.500.917 2306Kg19 x Container Double Row c/w 1” Manifold 901.500.918 2443Kg20 x Container Double Row c/w 1” Manifold 901.500.919 2567Kg2 x Container Single Row c/w 1 1/4” Manifold 901.500.920 263Kg3 x Container Single Row c/w 1 1/4” Manifold 901.500.921 390Kg4 x Container Single Row c/w 1 1/4” Manifold 901.500.922 518Kg5 x Container Single Row c/w 1 1/4” Manifold 901.500.923 646Kg6 x Container Single Row c/w 1 1/4” Manifold 901.500.924 773Kg7 x Container Single Row c/w 1 1/4” Manifold 901.500.925 901Kg8 x Container Single Row c/w 1 1/4” Manifold 901.500.926 1030Kg9 x Container Single Row c/w 1 1/4” Manifold 901.500.927 1157Kg10 x Container Single Row c/w 1 1/4” Manifold 901.500.928 1285Kg11 x Container Single Row c/w 1 1/4” Manifold 901.500.929 1415Kg12 x Container Single Row c/w 1 1/4” Manifold 901.500.930 1543Kg13 x Container Single Row c/w 1 1/4” Manifold 901.500.931 1670Kg14 x Container Single Row c/w 1 1/4” Manifold 901.500.932 1798Kg15 x Container Single Row c/w 1 1/4” Manifold 901.500.933 1926Kg16 x Container Single Row c/w 1 1/4” Manifold 901.500.934 2054Kg4 x Container Double Row c/w 1 1/4” Manifold 901.500.935 523Kg5 x Container Double Row c/w 1 1/4” Manifold 901.500.936 651Kg6 x Container Double Row c/w 1 1/4” Manifold 901.500.937 775Kg7 x Container Double Row c/w 1 1/4” Manifold 901.500.938 913Kg8 x Container Double Row c/w 1 1/4” Manifold 901.500.939 1038Kg9 x Container Double Row c/w 1 1/4” Manifold 901.500.940 1167Kg10 x Container Double Row c/w 1 1/4” Manifold 901.500.941 1291Kg11 x Container Double Row c/w 1 1/4” Manifold 901.500.942 1419Kg12 x Container Double Row c/w 1 1/4” Manifold 901.500.943 1544Kg13 x Container Double Row c/w 1 1/4” Manifold 901.500.944 1682Kg14 x Container Double Row c/w 1 1/4” Manifold 901.500.945 1807Kg15 x Container Double Row c/w 1 1/4” Manifold 901.500.946 1945Kg16 x Container Double Row c/w 1 1/4” Manifold 901.500.947 2071Kg17 x Container Double Row c/w 1 1/4” Manifold 901.500.948 2189Kg18 x Container Double Row c/w 1 1/4” Manifold 901.500.949 2314Kg19 x Container Double Row c/w 1 1/4” Manifold 901.500.950 2451Kg20 x Container Double Row c/w 1 1/4” Manifold 901.500.951 2576Kg21 x Container Double Row c/w 1 1/4” Manifold 901.500.952 2707Kg22 x Container Double Row c/w 1 1/4” Manifold 901.500.953 2832Kg23 x Container Double Row c/w 1 1/4” Manifold 901.500.954 2961Kg24 x Container Double Row c/w 1 1/4” Manifold 901.500.955 3086Kg25 x Container Double Row c/w 1 1/4” Manifold 901.500.956 3223Kg26 x Container Double Row c/w 1 1/4” Manifold 901.500.957 3347Kg

KITS - Solenoid Operated

ext2.qxd 13/02/01 17:10 Page 32

tyco Fire &Security


The wet chemical fire fighting agent is potassiumcarbonate liquid and containers are supplied fullycharged. Wet chemical solution is availableseperately to re-charge discharged containers.

Product Code300.204.001Wet Chemical Agent

Wet Chemical System ComponentsAgent

The Wet Chemical system is configured aroundthree container sizes charged with wet chemicalAgent.The wet chemical capacities available are 2.4, 3.5or 5.5 gallons (US).Technical SpecificationThe containers are manufactured to DOT4B175and pressurised with nitrogen to 12 bar (175 psi).

Product Codes303.203.002PCL 240 Container assembly303.203.003PCL 350 Container assembly303.203.004PCL 550 Container assembly

Wet Chemical Containers

The container mounting brackets are designed tosecurely fix the containers to a wall or supportingstructure.

Product Codes311.204.001Container bracket assembly MB-1 (for PCL 240/PCL 350)311.204.002Container bracket assembly MB-15 (for PCL 550)

Wet Chemical Container Brackets

The mechanical control head is designed tooperate the wet chemical system container,through the separation of the fusible link line orby direct manual operation turning of the releaselever.

Product Code304.203.001Mechanical control head

Mechanical Control Head

The microswitch kit is designed to be mounted inthe control head. This provides a means to allowelectrical indication of system operation.

Product Code304.203.002Microswitch kit (SPDT) for control head

Microswitch Kit (SPDT) for Control Head

ext2.qxd 13/02/01 17:11 Page 33

tyco Fire &Security


Product Codes305.200.0096mm 1/4” Brass cable bush305.200.0106 mm 1/4” Brass back nuts310.203.013Remote cable pull station312.001.001Wire rope 1/16”312.001.002Wire rope 2mm - stainless steel312.001.003Wire rope 3mm - galvanised

312.001.004Wire rope butt connector312.001.005Solistrand ring 3mm312.001.006Bulldog clamp 3mm312.001.007Cable clamp/striker nut312.001.008Corner pulley 76mm diameter - brass312.001.010Fusible link line test and anchor point

312.001.011‘S’ Hooks312.001.012Wire rope crimps 1/16”312.001.014Fusible links - 280 Degree F312.001.015Fusible links - 350 Degree F312.001.016Fusible links - 500 Degree F526.001.018.AT528 Mechanical manual release unit(Unbranded)526.001.018.TT528 Mechanical manual release unit (Thorn)

Wet Chemical Cable Release Parts

Product Codes310.203.002NLS-R310.203.003NLS-UB310.203.004NLS-F2310.203.005NL-D1310.203.006NL-D2310.203.007NL-D3

310.203.008NL-A310.203.009NL-F1310.203.010NL-F1.25310.203.011NL-RH2310.204.001NL-P310.204.002NL-S-A

Wet Chemical Nozzles

The pneumatic actuation container is designed toallow the operation of multiple wet chemicalcontainers (maximum 10).When multi container operation is required thecontrol head is fitted to the PAC-10 andpneumatic actuators are fitted to each wetchemical container. Technical SpecificationThe containers are manufactured to DOT4B350and pressurised with nitrogen to 24.1 bar (350 psi).

Product Code310.203.015Pneumatic actuation container (PAC-10)

Pneumatic Actuation Container (PAC-10)

The electrical control head is designed to operatethe wet chemical system container from anelectrical input or by direct manual operation byturning the release lever.Technical SpecificationThe standard operating volatge is 24Vd.c.

Product Code310.203.016Electrical control head

Electrical Control Head

2

1

3

4

5

6

78 9 10

11

1213

Key1 - 310.203.0132 - 526.001.018.T3 - 312.001.0014 - 312.001.0025 - 312.001.0046 - 312.001.0067 - 312.001.0118 - 312.001.0129 - 312.001.01410 - 312.001.01511 - 312.001.01612 - 312.001.01013 - 312.001.00814 - 305.200.00915 - 305.200.01016 - 312.001.003

14

15

16

ext2.qxd 13/02/01 17:12 Page 34

tyco Fire &Security


Product Codes312.001.014Fusible links - 280 Degree F312.001.015Fusible links - 350 Degree F312.001.016Fusible links - 500 Degree F

Fusible Links

Product Code312.001.008Corner pulley 76mm diameter - brass

Corner Pulley

Product Code312.001.010Fusible link line test and anchor point

Fusible Link Line Test and Anchor Point

ext2.qxd 13/02/01 17:12 Page 35

tyco Fire &Security


Product Codes308.001.0026mm (1/4”) BS1387 Medium quality parkerised(cable systems only)308.001.00315 mm (1/2”) Schedule 80 seamless galvanised308.001.00420mm (3/4”) Schedule 80 seamless galvanised308.001.00525mm (1”) Schedule 80 seamless galvanised308.001.00632mm (1 1/4”) Schedule seamless galvanised308.001.00740mm (1 1/2”) Schedule 80 seamless galvanised308.001.01650mm (2”) Schedule 80 seamless galvanised

308.001.0086mm (1/4”) BS1387 Heavy quality galvanised308.001.00910mm (3/8”) BS1387 Heavy quality galvanised308.001.01015 mm (1/2”) BS1387 Heavy quality galvanised308.001.01120mm (3/4”) BS1387 Heavy quality galvanised308.001.01225mm (1”) BS1387 Heavy quality galvanised308.001.01332mm (1 1/4”) BS1387 Heavy quality galvanised308.001.01440mm (1 1/2”) BS1387 Heavy quality galvanised308.001.01550mm (2”) BS1387 Heavy quality galvanised

308.001.01715 mm (1/2”) Schedule 40 seamless galvanised308.001.01820mm (3/4”) Schedule 40 seamless galvanised308.001.01925mm (1”) Schedule 40 seamless galvanised308.001.02032mm (1 1/4”) Schedule 40 seamless galvanised308.001.02140mm (1 1/2”) Schedule 40 seamless galvanised

Pipework, Fittings & General ComponentsPipework

Product Codes309.001.0016mm (1/4”) BSP 150lb black (cable systems)309.001.0026mm (1/4”) NPT 3000lb galvanised309.001.00310mm (3/8”) NPT 3000lb galvanised309.001.00415 mm (1/2”) NPT 3000lb galvanised309.001.00520mm (3/4”) NPT 3000lb galvanised

309.001.00625mm (1”) NPT 3000lb galvanised309.001.00732mm (1 1/4”) NPT 3000lb galvanised309.001.00840mm (1 1/2”) NPT 3000lb galvanised309.001.00950mm (2”) NPT 3000lb galvanised

Fittings - Sockets

Product Codes309.002.01010mm (3/8”) NPT 300lb galvanised309.002.00115 mm (1/2”) NPT 300lb galvanised309.002.00220mm (3/4”) NPT 300lb galvanised309.002.00325mm (1”) NPT 300lb galvanised

309.002.00432mm (1 1/4”) NPT 300lb galvanised309.002.00540mm (1 1/2”) NPT 300lb galvanised309.002.00650mm (2”) NPT 300lb galvanised

Fittings - Unions

Product Codes309.003.0016mm (1/4”) NPT 3000lb galvanised309.003.00210mm (3/8”) NPT 3000lb galvanised309.003.00315 mm (1/2”) NPT 3000lb galvanised309.003.00420mm (3/4”) NPT 3000lb galvanised


Fittings - Elbows

Product Codes309.004.0016mm (1/4”) NPT 3000lb galvanised309.004.00210mm (3/8”) NPT 3000lb galvanised309.004.00315 mm (1/2”) NPT 3000lb galvanised309.004.00420mm (3/4”) NPT 3000lb galvanised309.004.00525mm (1”) NPT 3000lb galvanised309.004.00632mm (1 1/4”) NPT 3000lb galvanised

309.004.00740mm (1 1/2”) NPT 3000lb galvanised309.004.00850mm (2”) NPT 3000lb galvanised

Fittings - Tees

ext2.qxd 13/02/01 17:13 Page 36

tyco Fire &Security


Product Codes309.005.0016mm (1/4”) NPT 3000lb galvanised309.005.00210mm (3/8”) NPT 3000lb galvanised309.005.00315mm (1/2”) NPT 3000lb galvanised309.005.00420mm (3/4”) NPT 3000lb galvanised


Fittings - Nipples

Product Codes309.007.0016mm (1/4”) NPT 3000lb galvanised309.007.00210mm (3/8”) NPT 3000lb galvanised309.007.00315mm (1/2”) NPT 3000lb galvanised309.007.00420mm (3/4”) NPT 3000lb galvanised309.007.00525mm (1”) NPT 3000lb galvanised

309.007.00632mm (1 1/4”) NPT 3000lb galvanised309.007.00740mm (1 1/2”) NPT 3000lb galvanised309.007.00850mm (2”) NPT 3000lb galvanised

Fittings - Plugs

Product Codes309.008.0016mm (1/4”) x 3mm (1/8”) NPT 3000lb galvanised309.008.00210mm (3/8”) x 6mm (1/4”) NPT 3000lb galvanised309.008.00315mm (1/2”) x 6mm (1/4”) NPT 3000lb galvanised

309.008.00415mm (1/2”) x 10mm (3/8”) NPT 3000lb galvanised309.008.00520mm (3/4”) x 10mm (3/8”) NPT 3000lb galvanised309.008.00620mm (3/4”) x 15mm (1/2”) NPT 3000lb galvanised309.008.00725mm (1”) x 10mm (3/8”) NPT 3000lb galvanised309.008.00825mm (1”) x 15mm (1/2”) NPT 3000lb galvanised309.008.00925mm (1”) x 20mm (3/4”) NPT 3000lb galvanised309.008.01032mm (1 1/4”) x 10mm (3/8”) NPT 3000lb galvanised309.008.01132mm (1 1/4”) x 15mm (1/2”) NPT 3000lb galvanised309.008.01232mm (1 1/4”) x 20mm (3/4”) NPT 3000lb galvanised309.008.01332mm (1 1/4”) x 25mm (1”) NPT 3000lb galvanised

309.008.01440mm (1 1/2”) x 15mm (1/2”) NPT 3000lb galvanised309.008.01540mm (1 1/2”) x 20mm (3/4”) NPT 3000lb galvanised309.008.01640mm (1 1/2”) x 25mm (1”) NPT 3000lb galvanised309.008.01740mm (1 1/2”) x 32mm (1 1/4”) NPT 3000lbgalvanised309.008.01850mm (2”) x 15mm (1/2”) NPT 3000lb galvanised309.008.01950mm (2”) x 20mm (3/4”) NPT 3000lb galvanised309.008.02050mm (2”) x 25mm (1”) NPT 3000lb galvanised309.008.02150mm (2”) x 32mm (1 1/4”) NPT 3000lb galvanised309.008.02250mm (2”) x 40mm (1 1/2”) NPT 3000lb galvanised

Fittings - Reducing Bushes

ext2.qxd 13/02/01 17:13 Page 37

tyco Fire &Security


Product Codes310.001.00210mm (3/8”) Ceiling rose - white plastic310.001.00415mm (1/2”) Ceiling rose - white plastic310.001.00520mm (3/4”) Ceiling rose - white plastic310.001.00625mm (1”) Ceiling rose - white plastic310.001.00332mm (1 1/4”) Ceiling rose - white plastic310.001.00750mm (2”) Ceiling rose - white plastic313.004.007Gloss paint - signal red

Finishing Parts

Fixings

Product Codes311.002.0016mm (1/4”) x 10mm Muncen ring311.001.00310mm (3/8”) x 10mm Muncen ring311.002.00315mm (1/2”) x 10mm Muncen ring311.002.00420mm (3/4”) x 10mm Muncen ring311.002.00525mm (1”) x 10mm Muncen ring311.002.00632mm (1 1/4”) x 10mm Muncen ring311.002.00740mm (1 1/2”) x 10mm Muncen ring311.002.00850mm (2”) x 10mm Muncen ring

311.002.01125mm (1”) Universal pipe clamp311.002.01232mm (1 1/4”) Universal pipe clamp311.003.001Unistrut channel P1000311.003.003Unistrut (Zebedee) nut P1010311.003.004Unistrut flat ‘T’ plate fitting P1031311.003.005Unistrut 90 degree fitting P1033311.003.006Unistrut flat ‘L’ plate fitting P1036311.003.007Unistrut 30mm square washers 12mm P1063

311.003.008Unistrut 90 degree fitting P1458311.003.009Unistrut flat plate fitting P1065311.003.010Unistrut base plate (leg foot) P2072/S1311.003.011Unistrut base plate (triangular) P2348/S1311.003.012Cantilever bracket x 450mm311.003.013Unistrut nuts M12 P3013311.003.015Unistrut hexagon screws M12 x 30mm311.003.016Unistrut hexagon screws M12 x 40mm311.003.017Lindaptor 10mm FL-2311.003.018Cantilever bracket x 600mm311.003.025Unistrut (Zebedee) nut P1008/M10311.003.026Unistrut hexagon screws M10 x 40mm311.003.027Unistrut plastic end plugs P1240311.004.001Unistrut wedge nuts M10311.004.002Rawshield M10311.004.003Rawshield M12311.004.004Back plate M12311.004.005Back plate M10311.004.006Studding M10311.004.007Studding M12

1

2

5 6

10

11

3

4

7

8

20

9 12

21

22

23

19

18

13 14 1516

17

Key1 - 311.003.0112 - 311.002.0053 - 311.003.0044 - 311.003.0065 - 311.002.0116 - 311.003.0037 - 311.003.0098 - 311.003.0109 - 311.003.01210 - 311.003.00811 - 311.003.00712 - 311.003.01813 - 311.003.01314 - 311.003.01515 - 311.003.01616 - 311.003.02617 - 311.003.01718 - 311.003.02519 - 311.004.00120 - 311.004.00521 - 311.003.02722 - 311.004.00223 - 311.004.003

ext2.qxd 13/02/01 17:14 Page 38

tyco Fire &Security


Product Code312.001.008Corner pulley 76mm diameter - brass

Corner Pulley

Product Codes526.001.018.AT528 Mechanical manual release unit(unbranded)526.001.018.TT528 Mechanical manual release unit (Thorn)

T528 Mechanical Manual Release Units

Product CodesTechnical Manuals14a-02High Pressure CO214a-03FM200 - 25 Bar (LPCB)14a/3/1FM200 - 25 Bar (UL Listed Systems)14a-03MFM200 - 25 Bar Marine (MCA Approved)14a-04INERGEN - 200 Bar

User ManualsUM11AUser Manual High Pressure CO2 - ADTUM12AUser manual FM200 - 25 Bar - ADTUM30AUser Manual INERGEN - 200 Bar - ADT

DocumentationTechnical Manuals & User Manuals

ext2.qxd 13/02/01 17:14 Page 39

Product Code Page No.14a/3/1 3914a-02 3914a-03 3914a-03M 3914a-04 39300.101.056 8300.101.786 8300.203.003 9, 29300.204.001 33300.205.001 14, 21300.291.226 10300.291.416 10300.291.916 10300.291.936 10300.291.937 10300.291.939 10300.291.940 10300.291.941 10300.291.966 10300.296.276 4300.580.136 8300.580.236 8302.001.008 8, 28, 30302.001.009 30302.001.010 30302.200.008 31302.200.009 30302.200.011 30302.200.014 26302.200.015 26302.200.016 28302.200.017 28302.200.018 28302.200.019 28302.200.020 26302.200.021 26302.200.026 25302.200.027 25302.200.028 27302.200.029 27302.200.030 27302.200.031 27302.200.032 27302.200.033 27302.200.034 27302.200.035 27302.200.048 31302.205.014 11302.382.196 4302.400.806 10302.401.026 10302.401.046 10302.401.066 10302.401.086 10302.401.096 10302.401.406 10302.401.426 10302.402.586 6302.402.596 6302.403.056 10302.403.076 6302.403.096 6302.403.116 6302.403.146 6302.403.156 6302.403.186 6302.403.196 6302.403.206 6302.403.216 6302.403.236 6302.403.256 6302.403.276 6302.403.296 6302.403.336 5302.403.356 5302.403.716 8302.403.736 8302.404.126 3302.404.136 3302.404.140 3302.404.146 3302.404.156 3302.406.276 4302.410.966 5302.410.976 5302.413.676 10302.413.826 3, 4302.413.886 4302.424.526 6302.427.566 8302.427.586 8302.430.616 8302.460.326 4302.470.216 10302.470.226 7302.470.506 4, 10

Product Code Page No.303.200.011 25303.200.012 25303.203.002 33303.203.003 33303.203.004 33303.205.001 14303.205.002 14303.205.003 14303.205.004 14303.205.005 14303.205.006 14303.205.007 14303.205.009 14303.205.010 14303.205.011 14303.205.012 14303.205.013 14303.205.014 14303.205.015 14, 21303.205.016 14, 21303.205.017 14, 21303.205.018 14, 21303.205.019 14, 21303.205.020 14, 21303.205.021 14, 21303.205.024 14303.205.025 14304.001.001 15304.030.506 10304.200.013 29304.203.001 33304.203.002 33304.205.001 15304.205.002 15304.205.003 15, 21304.205.004 15, 22304.205.005 16304.205.008 21305.200.001 30305.200.003 9, 27305.200.009 34305.200.010 34305.205.001 16305.205.002 5, 16305.205.003 16305.205.004 17305.205.006 22305.205.007 22306.200.003 25306.200.004 25306.200.005 26306.205.001 19, 23306.205.002 19, 23306.205.003 22307.200.009 27307.200.010 27307.200.011 27307.200.012 27307.200.013 27307.200.014 27307.200.015 27307.200.016 27307.205.001 18, 23307.205.002 18, 23307.205.003 18, 23307.205.004 18, 23307.205.005 18, 23307.205.006 18, 23307.205.007 18, 23307.205.008 18, 23307.205.009 18, 23307.205.010 18, 23307.205.011 18, 23307.205.012 18, 23307.205.013 18, 23307.205.014 18, 23307.205.015 18, 23307.205.016 18, 23307.205.017 18, 23307.205.018 18, 23307.205.019 18, 23307.205.020 18, 23308.001.002 36308.001.003 36308.001.004 36308.001.005 36308.001.006 36308.001.007 36308.001.008 36308.001.009 36308.001.010 36308.001.011 36308.001.012 36308.001.013 36308.001.014 36308.001.015 36

Product Code Page No.308.001.016 36308.001.017 36308.001.018 36308.001.019 36308.001.020 36308.001.021 36308.002.001 19308.002.002 19309.001.001 36309.001.002 36309.001.003 36309.001.004 36309.001.005 36309.001.006 36309.001.007 36309.001.008 36309.001.009 36309.002.001 36309.002.002 36309.002.003 36309.002.004 36309.002.005 36309.002.006 36309.002.010 36309.002.011 15309.002.012 15309.003.001 36309.003.002 36309.003.003 36309.003.004 36309.003.005 36309.003.006 36309.003.007 36309.003.008 36309.004.001 36309.004.002 36309.004.003 36309.004.004 36309.004.005 36309.004.006 36309.004.007 36309.004.008 36309.005.001 37309.005.002 37309.005.003 37309.005.004 37309.005.005 37309.005.006 37309.005.007 37309.005.008 37309.005.009 26309.007.001 37309.007.002 37309.007.003 37309.007.004 37309.007.005 37309.007.006 37309.007.007 37309.007.008 37309.008.001 37309.008.002 37309.008.003 37309.008.004 37309.008.005 37309.008.006 37309.008.007 37309.008.008 37309.008.009 37309.008.010 37309.008.011 37309.008.012 37309.008.013 37309.008.014 37309.008.015 37309.008.016 37309.008.017 37309.008.018 37309.008.019 37309.008.020 37309.008.021 37309.008.022 37309.010.002 19309.010.003 19309.011.001 19309.013.001 19309.013.003 22309.013.004 22309.013.005 22309.017.004 26309.017.005 26310.001.002 38310.001.003 38310.001.004 38310.001.005 38310.001.006 38310.001.007 38

Product Code Page No.310.200.001 27310.200.007 28310.200.008 28310.200.009 28310.200.010 28310.203.002 34310.203.003 34310.203.004 34310.203.005 34310.203.006 34310.203.007 34310.203.008 34310.203.009 34310.203.010 34310.203.011 34310.203.013 34310.203.015 34310.203.016 34310.204.001 34310.204.002 34310.205.001 17310.205.002 17310.205.003 17310.205.004 17310.205.005 17310.205.006 17310.205.011 17310.205.012 17310.205.013 17310.205.014 17310.205.015 17310.205.016 17310.205.017 17310.205.018 17310.205.022 17310.205.023 17310.205.024 17310.205.025 17310.205.026 17310.205.027 17310.205.028 23310.205.029 23310.205.030 23310.205.031 23310.205.032 23310.205.033 23310.205.034 23311.001.003 38311.002.001 38311.002.003 38311.002.004 38311.002.005 38311.002.006 38311.002.007 38311.002.008 38311.002.011 30, 38311.002.012 30, 38311.003.001 38311.003.003 38311.003.004 38311.003.005 38311.003.006 38311.003.007 38311.003.008 38311.003.009 38311.003.010 38311.003.011 38311.003.012 30, 38311.003.013 38311.003.015 38311.003.016 38311.003.017 38311.003.018 30, 38311.003.025 38311.003.026 38311.003.027 38311.004.001 38311.004.002 38311.004.003 38311.004.004 38311.004.005 38311.004.006 38311.004.007 38311.006.011 28311.006.012 28311.006.013 29311.006.014 29311.006.015 28311.204.001 33311.204.002 33311.205.001 17311.205.002 17311.205.003 17311.205.004 18311.205.010 19, 23311.205.011 19, 23

INDEX

ext2.qxd 13/02/01 17:14 Page 40

INDEXProduct Code Page No.311.205.012 19, 23311.205.013 18, 22311.205.014 22311.205.015 19, 23312.001.001 34312.001.002 34312.001.003 34312.001.004 34312.001.005 34312.001.006 34312.001.007 34312.001.008 34, 35, 39312.001.010 34, 35312.001.011 34312.001.012 34312.001.014 34, 35312.001.015 34, 35312.001.016 34, 35313.004.007 38314.200.001 29314.200.002 29314.200.005 29314.200.006 29314.205.001 19, 24314.205.002 19, 24314.205.003 19, 24526.001.018 16, 30526.001.018.A 30, 34, 39526.001.018.T 30, 34, 39901.500.816 32901.500.817 32901.500.818 32901.500.819 32901.500.820 32901.500.821 32901.500.822 32901.500.823 32901.500.824 32901.500.825 32901.500.826 32901.500.827 32901.500.828 32901.500.829 32901.500.830 32901.500.831 32901.500.832 32901.500.833 32901.500.834 32901.500.835 32901.500.836 32901.500.837 32901.500.838 32901.500.839 32901.500.840 32901.500.841 32901.500.842 32901.500.843 32901.500.844 32901.500.845 32901.500.846 32901.500.847 32901.500.848 32901.500.849 32901.500.850 32901.500.851 32901.500.852 32901.500.853 32901.500.854 32901.500.855 32901.500.856 32901.500.857 32901.500.858 32901.500.859 32901.500.860 32901.500.861 32901.500.862 32901.500.863 32901.500.864 32901.500.865 32901.500.866 32901.500.867 32901.500.868 32901.500.869 32901.500.870 32901.500.871 32901.500.872 32901.500.873 32901.500.874 32901.500.875 32901.500.876 32901.500.877 32901.500.878 32901.500.879 32901.500.880 32901.500.881 32901.500.882 32



Product Code Page No.901.505.158 13901.505.159 13901.505.160 13901.505.161 13901.505.162 13901.505.163 13901.505.164 13901.505.165 13901.505.166 13901.505.167 13901.505.168 13901.505.169 13901.505.170 13901.505.171 13901.505.172 13901.505.173 13901.505.174 13901.505.175 13901.505.176 13901.505.177 13SL32094 9SL73327 9SL73606 9SL93411 11SL93429 7SL93430 7SL93464 7SL93465 10SL93466 8SL93472 8SL93481 11SL93482 11SL93485 10SL93486 10SL93529 9SL93530 9SL93627 4SL93841 10, 18SL93848 10SL93851 5SL93852 10, 11, 18SL93854 11SL93855 11SL93856 11SL93857 11SL93858 11SL93861 11SL93866 7SL93936 11SL93938 7SL93943 7SL96303 10SL99999 11UM11A 39UM12A 39UM30A 39

ext2.qxd 13/02/01 17:14 Page 41

extinguishing catalog

Documents