etx product line

7/25/2019 Etx Product Line

1/40

ETX Product LineQ1-2015

Regional Technical Seminar

SAA Training


2/40

ETXProduct Line 2

Agenda

RAD Service Assured Access

ETX Portfolio

Product highlights

Physical description

Functionality - Basic Operation

Internal Traffic paths


3/40

RAD Service AssuredAccess


4/40

ETXProduct Line 4

FE/GbE /10GE

Core Services

RAN Controller Site

ETX-2

Cloud/ Data CenterInternet

Access

ETX-5

Carriers Interconnection

Service Assured Access : Beyond Access

Access Network

Service Assured Access

Metro/Core

IP / MPLS

1/10 GbE Ring

First MileAccessAggregation

10GbE

Ring

GbE DSL

Cell-Site

1/10 GbE

FE/GbE

PDH/SDH

ETX-2

ETX-2

ETX-2ETX-5CustomerPremises

ETX-2

SDH/SONET

MSAN

MiNID

ETX-5

ETX-5

Service AssuranceEnd to End (VPN)

Service AssuranceEnd to End

Complete Access solution with full service visibility

Management


5/40

ETXProduct Line 5

ETX-2 for Service Assured Access

Flexible customer reach

Same service look & feel

Reliability & Protection

Advanced H-QoS

Synchronization overPacket

Service visibility

Performance monitoring

SLA reporting

ETX-2Demarcation and aggregation for SAA

Service Assured Access

Metro/Core

IP / MPLS

1/10 GbE Ring

First MileAccessAggregation

10GbE

Ring

GbE DSL

Cell-Site

1/10 GbE

FE/GbE

PDH/SDH

CustomerPremises

SDH/SONET

MSAN

ETX-5

ETX-5

ETX-2

ETX-2

ETX-2

ETX-2

MiNID

Management

ETX-5

Access Network


6/40

ETXProduct Line 6

Features and Performance

GEFE 10GE

L2/3 demarcation and scalable

monitoring with port and

service level protection

Redundant GE/10GE Demarcation,Aggregation and Grandmaster

Scalable aggregation, port, service and card

protection with hitless upgrades

RADs SAA Offering

Low-Cost, Monitoring

and basic demarcation

ETX-1

MiNID

GE/10GE Demarcationand Aggregation

ETX-2

ETX-5

GPS / Timing / PWECombo / RDNT PS / Hardened

ETX-2iL2/L3 Demarcation

Scale

RADviewConfiguration, automation

and Inventorymaintenance with PM

Portal and Reports


7/40

ETX-2Physical Description


8/40ETXProduct Line 8

ETX-2 Product Highlights

Premium L2, L3 and TDM PWE services E-LINE, E-LAN, E-Tree (CE2.0 Certified)

L3 VPN with integrated router

E1/T1, T3 PWE services

Flexible customer reach

1/10G Ethernet, SHDSL, PDH and SDH

Carrier-grade design over Linear, Ring (G.8032) and Dual Homed topologies

Advanced HQOS with high scale EVC shaping

HW based OAM offering scalable and accurate Fault Management and

Performance Monitoring in L2 networks TWAMP support for Performance Monitoring over L3 networks

Service activation tests (RFC2544 and Y.1564) with birth certificates

Advanced synchronization

Synchronous Ethernet, 1588v2 Slave, BC, TC and Grandmaster



ETX-2 configurations

ETX-203AX - Cost optimized for pure Ethernet services

Carrier Ethernet Demarcation Device

ETX-203AM - Modular uplink interfaces for Ethernet, SHDSL, E1/T1 & T3

and router module

Universal Carrier Ethernet Demarcation Device

ETX-205A - High-end design with redundant PS, Combo ports and

multiple options for routing, Synchronization and integrated E1/T1 ports

as well as High Scale TWAMP and D-NFV versions

Advanced Ethernet/Mobile Demarcation Device

ETX-220A - High-end design with redundant PS for multiple 10G and 1G

interfaces

10G Ethernet Demarcation/Aggregation Device



ETX-203AX

Flexible order options:

Plastic for regular temperature

Metal for extended temperature

Flexible port selections:

1 or 2 FE/GE network ports: SFP based

4 or 5 FE/GE user ports: SFP or UTP

Fan-less design

Rack Mounting Kit



ETX-203AM

Management

Out of Band FE port

Local RS-232User interfaces:

4 FE/GE interfaces

SFP or UTP

Modular Uplink

ETH

SHDSLETH Over PDH/SDH

wire-speed (1G) Router

FE/GbE Combo port

uplink module

2 x 10/100/1000BT

2 x 100/1000Fx (SFP)

SHDSL EFM

uplink module

4wire11.4 Mbps

8wire22.8 Mbps

Ethernet over PDH

uplink module

4/8xE1/T1

1/2xT3

GFP/VCAT/LCAS



ETX-205A

Management ports

Out of band - Ethernet port

Local craft terminal - RS-232

SyntTop synchronization ports:

External in/out (T3/T4)

1PPS and ToD

GPS antennal port

6 FE/GE combo interfaces*:

2 Network ports

4 User ports

Redundant power supplies:

AC: 100240VAC, 50-60Hz

DC: 24/48VDC

19, 1RU shelf, Rack and wall mount

Environmentally Hardened Option: -20 to +65C

4/8 E1/T1 PWE interfaces:

SAToP, CESoPSN (with CAS) UPD/IP and MEF8 encapsulation

Flexible and accurate timing

* Note: When ordered with integrated router, 4 GE ports are active



ETX-205A: 19 ordering options

19 metal chassis

ETH ports: 6xGE Combo

ETH MNG port

PTP

4 E1 interfaces

Power

Fixed AC or DC power supply

AC PS 90-230VAC with DG

DC 48V with DG



ETX-205A Distributed Grandmaser

19, 1U shelf, rack and wall mount

Embedded GPS receiver (supporting a standard GPS antenna)

Full Sync-E and Hybrid PTP-Sync-E support

Full G.8265.1 Telecom Profile support

Up to 64 simultaneous unicast slaves (@ 128 PPS each)

Automatic fallback to SyncE or PTP-BC under a GPS failure (future versions)

Supports the same functional capabilities of the standard ETX-2

Redundant power supplies:

AC: 100240VAC, 50-60Hz

DC: 24/48VDC

6 FE/GE combo interfaces:

2 Network ports

4 User ports

SyntTop synchronization ports:

GPS RF input (from antenna) 1588 TC/GM/Slave/BC*

Management ports

Out of band - Ethernet port

Local craft terminal - RS-232



Power supplies

Network Interface, XFP Based, 10G

4/3/2 x 10GE XFP Based Ports

2 NET 1:1 mode 1 NET, 1 User

Clock inputExternal Clock

Out Of BandManagement

CLI Management(Serial)

User Interface

SFP based

Available Options:

20x1GbE Fiber

10x1GbE Copper, 10x1GbE Fiber

ETX-220A



ETX-2i - Next Generation CPE

Advanced Carrier EthernetDemarcation Device for :

2G/3G/4G-LTE Mobile backhauling demarcation

Distributed Network Function Virtualization (DNFV) with optional x86

Premium Services

MEF CE 2.0 services and L3 VPN for IP services

Added value services based on DNFV

Key features

8G forwarding at L2 and L3

High scalability1000 flows

Advanced TM with flexible classification and HQOS

HW based L2-OAM for scalable and accurate Fault Management and

Performance Monitoring in L2 networks

One-Way TWAMP support for Performance Monitoring over L3 networks

Future proof design with FPGA based forwarding core



ETX-2i

Power supplies

8 x GbE ports

(Combo) Alarmsin/out

Clock inputExternal Clock

Out Of BandManagement

Modular uplink slot

(compatible with ETX-203AM modules)

2xGE combo

4/8w SHDSL 4/8 E1/T1, 1 or 2 T3 EoPDH

Future Use:

Dry contacts

USB interface on the main board

CLI Management(Serial)



ETX-2i8 Fixed Ports vs. 6 Port Modular



Product ETX-2i/RTR ETX-205A/RTR ETX-203A/RTR

Available ports 4-8 combo 4 combo

(1 or 2 network ports)

4 fixed (SFP or Copper)

(Only 1 network port)

Power supply AC, DC, power supply

redundancy and Dual

DC Feed

1 or 2, AC or DC

Power supply

redundancy

AC or DC

No redundancy

Router throughput 8G (bidirectional) 1G (bidirectional) 1G (bidirectional)

Possible enhancements

in future versions

- Activate GE port on the

router module with

reduced router

throughput to 0.5G

ETX-2 with Routing Capabilities

Note: Routing option for ETX-2i is planned for March 2015



Integrated Router for L3 Services

8G routing Hybrid L2/L3 service with Unified inventory

Flexible IP service deployments

Multiple customers and applications

separation using VRFs

Shaping per EVC/IP interface Routing features:

1Gbps L3 forwarding with 16 VRFs

IPv4/IPv6 routing with 4K entries

OSPF and BGP4

VRRPv2/v3

Single hop BFD for continuity check and protection

224 L3/L4 Access List rules (ACL)


21/40

ETX-5Physical Description


22/40

ETXProduct Line 22

ETX-5300A Front View Description

4 x 10GbE

XFP

Alarm output

connector

FanModule

Secondary

Main Card

Primary

Main Card

20 x 1GbE Elec I/O card

20 x 1GbE

Opt SFP I/Ocard

Air

Filter

Redundant PSU(DC/AC Outlet)

Clocking

Interfaces

Fully

Redundant

Forwarding

engineCommon

Logic

Clocking


23/40

ETXProduct Line 23

Fully Standards based for maximum interoperability

Highest capacity-to-size ratio in the market Fully redundant hardware and in service software upgrade

Hardware based OAM for SLA Assurance and circuit validation

Advanced traffic management

ETX-5: Ethernet Aggregation + PseudowireGateway

SyncTop synchronization ports:

IEEE 1588-2008: Grandmaster, Slave & TC

Sync-E: External & Master

1PPS, TOD &10MHz for phase and freq. lock

Dual Main Switching cards

1+1 port or card redundancy

Redundant control and timing

4 or 8 x 10GbE XFP

Redundant AC/DC

power supplies:

Fans and alarm

output

4 x I/O cards, each supporting:

20 x 1GbE SFP/UTP (Max of 80)

2 x 10GbE XFP (Max of 8)

4 x Ch. OC3 PWE3 (Max of 16)

17.3

3U

14.9


24/40

ETXProduct Line 24

Fully redundant, carrier class design

G.8032v2 based self healing rings Daisy chain topology with LAG

Premium L2 services for carriers and mobile operators

Perfect for retail, wholesale and mobile services

CE2.0 services: E-Line, E-LAN, E-Access and E-Tree

Aggregated TDM PWE services

Superior HQoS with enhanced Traffic Management

3 level shaping for network wide service assurance

Huge queue depth (total of 1.5GB) allowing seamlessly absorption of TCP bursts for higher

good-put

HW based OAM offering fault monitoring and performance management

Service activation tests with birth certificates

Advanced synchronization

Synchronous Ethernet, 1588v2 Slave, BC, TC and Grandmaster

Fully managed by RADview

ETX-5 Product Highlights


25/40

ETXProduct Line 25

17.3

3U

14.9

Hardware OAM:

802.1ag/Y.1731 per flow

2,048 hardware OAM sessions

4096/8192 MEP/RMEP

Up MEP / Down MEP

Y.1564 Circuit validation

Architecture:

E-line; E-LAN;E-Tree* E-Access

Port redundancy (APS/LAG)

G.8032v2: rings/sub-rings

Bridging: 256K MACs

Performance:

100G Full Duplex Switching

Capacity

12KB Jumbo Frames

Traffic Mgt / HQoS:

Up to 4K EVCs

EVC/Tunnel/Port level

scheduling and shaping

Up to 384 shaped EVCs perNetwork port

Per EVC policer

WRED Congestion Avoidance

per queue

ETX-5 Product Offering


26/40

ETXProduct Line 26

Scaling Short Summary

Feature Entity Scale

EVCs and flows EVCs 4k

IO card flows 2k (per IO)

Main card flows 8k (2k with flow counters)

Policing Policer 2k (per IO)

TM Scheduling andShaping Up to 384 EVC level schedulersand shapers per port

ETH OAM MEPs 4k

PM sessions 1k

Bridge Bridge 32

Bridge ports perBridge

128

Broadcast Domains 4k

MAC table 32k

G.8032 Ring Ring 16

TDM PW PWs per TDM card 336 per card


27/40

ETXProduct Line 27

Supported Cards ETX-5300ARelease 2.0

Card name Technology Interop with Description

E5-MC4Main system card withcommon logicand 4 x 10GbE XFP

Any MEFcompliant device

Main card with Packet forwarding processing engine, common

Logic & Clock unit. On card 4 x 10GbE XFP interfaces

E5-10GB-2X

2x 10GE XFP Optical portservice card

Any MEFcompliant deviceETX,

Ethernet IO card with 2 x 10GE optical XFP ports, Non blockingarchitecture, SyncE & IEEE-1588-2008 on all ports

E5-GBE-20O

20 x 1GbE SFP Optical portsservice card

Any MEFcompliant deviceETX, IPMux

Ethernet IO card with 20 x 1GbE optical ports, Non blockingarchitecture, SyncE & IEEE-1588-2008 on all ports

E5-GBE-20E20 x 10/100/1000 Electricalports service card

Any MEFcompliant deviceETX, IPMux

Ethernet IO card with 20 x 1GbE Electrical ports, Non blockingarchitecture, SyncE & IEEE-1588-2008 on all ports

E5-cTDM-1Ch STM-1/OC3 service card

Any Sonet/SDHwithCh STM-1/OC3device

Channelized TDM card with 4 chOC-3/chSTM-1 interfaces, userconfigurable SONET/SDH mode

E5-cTDM-4Ch STM-4/OC12 service card

Any Sonet/SDHwithCh STM-4/OC12device

Channelized TDM card with 4 chOC-3/chSTM-1 interfaces, userconfigurable SONET/SDH mode

19 3U

4 x 10GbE & 80 x GbE/16 x STM1/OC3


28/40

ETX - Basic Operation


29/40

ETXProduct Line 29

Architecture and Data Path Scheme

2/4 10G

I/O

20G(2x10G)

CL

10GbE I/F

Packet

Engine

Main B

2/4 10G

CL

Main A

Fabric I/F 40Gbps

I/O I/O I/O

10GbE I/F

Packet

Engine

Active Active

Non Blocking

Packet engine per

card

acts like a single

distributed engine

Packet Engine


30/40

ETXProduct Line 30

ETX-5 IO card to Main Card

The physical connection between the I/O and main Ethernetcards is represented by a logical port (management entity)called SAG (Service Aggregation Group)

IO card is build from 2 x 10 GbE sectionsBy default, two SAGs exist per I/O Ethernet card

Each SAG includes 512 Service Attachment Points (SAPs)


31/40

ETXProduct Line 31

ETX-5 Data path

Ingress Egress

I/OCard

EthernetPort

Ethernet I/O or

Main Card Ingress

MainCard

EthernetPort

I/OCardST

M-1/

OC-3Po

rt

Ingress Processing Egress Traffic Managemnt

IngressProcessing

(L2CP)

C

lassification

CoS&

Color

Mapping

SAG

Policing

Queuing

Shaping

Flow

Aggregation

VLANEditing

Tunnel

Forwarding

Bridge

Router

I/OorMainCardEthe

rnetPorts

TDMPseudowire

Processing

Pseudow

ire

Aggregation

TDM I/O Card Ingress

UDP/IP orMEF-8

Pseudowires

Queuing

Shaping


32/40

ETXProduct Line 32

ETX-5 Data path

The I/O card performs flow classification, CoS and color mapping andpolicing. It supports a hierarchical scheduling and shaping at its egress to do

a pre-forwarding scheduling and shaping (post-forwarding shaping at

network egress is done by the main card). Editing and forwarding (bridging,

EVC cross-Connect, routing) is done by the main card. Classification, as well

as packet CoS and color information is available for the main card for furtherprocessing.

Ethernet I/O Card

20 x GbEor

2 x 10GbE2 x 10GbE Ethernet Main Card 4 x 10GbE

ClassifyMap CoSand Color

Forward

Pre-ForwardingScheduling

and ShapingEdit

Forward ClassifyEdit

Main to I/O Card Direction

I/O to Main Card Direction

Police

Post-ForwardingScheduling and

Shaping

Post-ForwardingScheduling and

Shaping

Map CoSand Color


33/40


34/40


35/40


36/40


37/40


38/40


39/40


40/40

Karin Amsalem

Technical Training Manager

[email protected]

etx product line

Documents