egp report

Company Name

Gas Authority of India Ltd.

XYZSMFLGMFLMFLDEFK360 LGT 2011

Pipeline Inspection Report

Project Name

IP-2, Sherpura to SV-6, Halol

1219.2 mm

Pipe Size

Inspection Date(s)

May 25, 2011

Report Date(s)

Aug 4, 2011

TDW Regional Office

TDW India Ltd.

Gas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol


TDW Services, Inc.

Executive Summary - Deformation

Page 1 of 1

A total of 0 deformations were detected on the inspection survey.

Inspection data was obtained for the full length (24353 meters / 24.35km) of the survey. The quality of the inspection data is satisfactory for a comprehensive assessment of this pipeline segment.

Tool Tracking By: n/a

Data Analyst: Liam FergusonVishal PatelOn-site Representative:

20.53 m/secMaximum Velocity:24,353 mPipeline Length:

0.58 m/secAverage Velocity:11.34Duration of run - Hours:

Stationing:

GPS - LAT: 22.66249 22.48802

GPS - LONG: 73.64448 73.49245

Date/Time: 5/18/2011 12:00:00 AM 5/18/2011 12:00:00 AM

Location: IP-2, Sherpura SV-6, Halol

Launcher Receiver

IP-2, Sherpura to SV-6, Halol

Mr Ranveer Singh 1219.2 mm Air - compressed


Deformations Detected: 0 Ovalities Detected: 0 Expansions Detected: 0 Heavy Weld Detected: 0 Valves Detected: 2

No dents found meeting minimum report parameters No dents found meeting minimum report parameters

RUN INFORMATION

INSPECTION FINDINGS

INSPECTION DETAILS

Executive S

umm

ary - Deform

ation



TDW Services, Inc.

Deformation Summary

The Deformation Summary Report lists all the deformations and dents detected during the inspection, sorted by depth of deformation (descending)

DEFINITIONS

Deform

ation Sum

mary

On Weld Determination whether the indication crosses a girth (or seam) weld.

Description Text describing a deformation in greater detail. Any special conditions are noted.

Metal Loss "Yes" is listed if there is any metal loss associated with a dent.

Distance from Defect The distance to the upstream and downstream reference listed in the previous column. Used for locating defects in the field.

Above-Ground References

The name of the closest upstream and downstream references, usually either an AGM or a valve.

Min X Sec Dia The minimum measured Cross-Section (ID) measured within the scope of the deformation.

Distance Given in either feet or meters, based on contractual agreements, this is the absolute distance measured by the tool from launch.

ID# Each Deformation is automatically assigned a number in the software. This number is provided to assist the user of PIGTRAP software to more easily find any given defect.

Depth Depth of the indication in inches or mm.

Sub Type The sub type of deformation if other than dent (i.e. Heavy Weld, Ovality, Buckle, Expansion).

Orientation The orientation of the deformation indication in degrees (top of pipe = 0) and clock position, as viewed facing downstream.

Dents may affect the integrity of the pipeline and are considered harmful. A dent with associated metal loss is potentially more significant than a dent alone.



TDW Services, Inc.

Deformation Summary

Page 2 of 2

No Dents have been detected on this pipeline inspection

ID#Distance

(m)Depth (mm)

Depth %

Orientation(Deg / O’Clock) Sub Type

Min X Sec

Dia DescriptionOn

WeldMetal Loss Above-Ground References

Distance from

Defect

Deform

ation Sum

mary



TDW Services, Inc.

Charts

The Pipeline Summary report provides an overview of the pipeline condition.

The following charts are utilized in this report:

Dent Orientation The distance from launch is plotted against the orientation of the deformation indications. Orientation is based on 360° in a circle, with 0°or 360° marking the top of the pipe (180° the bottom).

Dent Depth This chart highlights the predicted depths of deformations in inches or mm compared to distance.

Velocity - DEF Displays the speed of the tool relative to distance during the inspection. The specified contractual velocity of the inspection tool is 0 feet per second. If the tool exceeds this speed, the data collected by the tool may be degraded.

CHARTS

Charts



TDW Services, Inc.

Velocity Graph - DEF

Velocity G

raph - DE

F



TDW Services, Inc.

Dent Depth Graph

No dents found meeting minimum report parameters.

Dent D

epth Graph



TDW Services, Inc.

Dent Orientation Graph

8:00 O’Clock

4:00 O’Clock

No dents found meeting minimum report parameters.

Dent O

rientation Graph



TDW Services, Inc.

Locations Summary

A location is a feature in the pipeline that can be used to correlate the inspection tool data to above ground references. Common location features include valves, fittings, flanges, tees, casings, repairs and aboveground markers (AGMs).

For example, a metal loss area could be referenced as being 200 feet down stream from a valve. Not all locations can be easily found from above ground. Some locations might not be useful if they are not above ground.

Description Describes the location in greater detail. Possible entries include valves, flanges, fittings, tees, markers, etc.

D/S Weld Dist. The distance to the downstream (D/S) weld (in feet or meters).

Longitude This shows the east/west position of the Location as supplied by the customer or recorded by an AGM box. For XYZ mapping runs, these values are the supplied survey points or were calculated by the tool.

Latitude This shows the north/south position of the Location as supplied by the customer or recorded by an AGM box. For XYZ mapping runs, these values are the supplied survey points or were calculated by the tool.

U/S Weld Dist. The distance to the upstream (U/S) weld (in feet or meters).

Time A reference time from the inspection tool. May also be used to locate features in the PIGTRAP software.

ID# Each location is automatically assigned a number in the software. This number is provided to assist the user of PIGTRAP software to more easily find any given defect.

Joint # This unique number identifies the girth weld number.


Zeroes in Latitude and Longitude mean that no data was supplied by the customer. Calculated or estimated values can be viewed in the Pipe Listing report.

Locations Sum

mary

DEFINITIONS



TDW Services, Inc.

Locations Summary

Page 2 of 2

10000005 74,899.81 24,353.7 20,890 5.1 5.4 Valve (Receiver), SV-6 Halol 22.48802 73.49245

10000003 55,569.75 13,449.4 11,570 1.3 4.5 Bend right 0.00000 0.00000

10000004 56,033.85 13,721.3 11,810 2.2 5.9 Bend right 0.00000 0.00000

10000002 36,209.47 874.9 860 2.0 3.8 Bend right 0.00000 0.00000

10000000 34,069.78 0.0 110 0.3 0.2 Valve (Launcher), IP-2 Sherpura 22.66249 73.64448

10000001 35,557.54 585.7 600 2.8 5.5 Bend left 0.00000 0.00000

ID# Time Dist (m) Joint #U/S Weld

Dist.D/S Weld

Dist. Description Latitude Longitude

Repair 0

Marker 0

Tee 0

Pipe Support 0

Valve 2

Bend 4

Type Number

Casing 0

Fitting 0

Flange 0

Locations Sum

mary



TDW Services, Inc.

Nominal Wall ThicknessDEFINITIONS

Nom

inal Wall T

hickness

The following list provides locations along the pipeline where changes in wall thickness or pipe type occur. While the TDW inspection tool can easily detect changes in wall thickness, it cannot take direct thickness measurements. Therefore, where wall thicknesses are known, the tool can identify the locations where the thickness changes. Where wall thicknesses are not known, best efforts will be made to estimate thicknesses based on best available data.

Yield Strength (SMYS)

Specified Minimum Yield Strength – A required strength level that measured yield stress of a pipe material must exceed, which is a function of pipe grade. The measured yield stress is the tensile stress required to produce a total elongation of 0.5 percent of a gage length as determined by an extensometer during a tensile test.

Safety Factor(or design factor) Typically 0.72 per ASME B31.4 In setting the safety factor, due consideration has been given to and allowances made for the manufacturing tolerance and maximum allowable depth of imperfections provided for in the specifications.

Length of Segment The length of the pipe for the specified wall thickness, measured in feet or meters.

Pipetype Type of pipe construction. Electric Resistance Weld (ERW), Seamless (SMLS), Lap Weld (LW), etc.

ID# Each wall thickness change ID is automatically assigned a number in the software. This number is provided to assist the user of PIGTRAP software to more easily find any given defect.


Wall Thickness The predicted wall thickness in inches or millimeters.



TDW Services, Inc.

Nominal Wall Thickness

Page 2 of 3

11000024 13716.52 23.80 ERW 70000 0.72 8.15

11000023 13679.92 15.90 ERW 70000 0.72 36.60

11000026 15312.29 25.00 ERW 70000 0.72 37.55

11000025 13724.67 15.90 ERW 70000 0.72 1,587.62

11000022 13531.77 23.80 ERW 70000 0.72 148.15

11000019 13002.67 15.90 ERW 70000 0.72 444.13

11000018 12977.91 23.80 ERW 70000 0.72 24.76

11000021 13452.33 15.90 ERW 70000 0.72 79.44

11000020 13446.80 23.80 ERW 70000 0.72 5.52

11000032 16606.14 25.00 ERW 70000 0.72 12.30

11000031 16220.20 15.90 ERW 70000 0.72 385.94

11000028 15744.79 25.00 ERW 70000 0.72 37.32

11000027 15349.84 15.90 ERW 70000 0.72 394.95

11000030 16195.19 25.00 ERW 70000 0.72 25.01

11000029 15782.12 15.90 ERW 70000 0.72 413.07

11000005 2614.12 23.80 ERW 70000 0.72 37.51

11000004 877.13 17.50 ERW 70000 0.72 1,736.99

11000007 2658.28 15.90 ERW 70000 0.72 601.08

11000006 2651.63 17.50 ERW 70000 0.72 6.65

11000003 871.27 23.80 ERW 70000 0.72 5.86

11000000 -0.29 17.50 ERW 70000 0.72 581.70

11000017 7424.02 15.90 ERW 70000 0.72 5,553.89

11000002 589.69 17.50 ERW 70000 0.72 281.58

11000001 581.42 25.00 ERW 70000 0.72 8.28

11000014 4724.18 17.50 ERW 70000 0.72 352.84

11000013 4638.02 23.80 ERW 70000 0.72 86.17

11000016 5714.37 17.50 ERW 70000 0.72 1,709.64

11000015 5077.03 23.80 ERW 70000 0.72 637.35

11000012 4085.56 17.50 ERW 70000 0.72 552.46

11000009 3480.15 23.80 ERW 70000 0.72 23.94

11000008 3259.37 17.50 ERW 70000 0.72 220.78

11000011 4048.39 23.80 ERW 70000 0.72 37.17

11000010 3504.09 17.50 ERW 70000 0.72 544.30

ID# Distance (m)Wall Thickness (mm) Pipetype

Yield Strength (SMYS) Safety Factor

Length of Segment (m) N

ominal W

all Thickness



TDW Services, Inc.

Nominal Wall Thickness

Page 3 of 3

11000033 16618.44 15.90 ERW 70000 0.72 1,297.84

11000035 21446.27 15.90 ERW 70000 0.72 2,728.18

11000034 17916.29 23.80 ERW 70000 0.72 3,529.98

11000036 24174.45 23.80 ERW 70000 0.72 179.28

ID# Distance (m)Wall Thickness (mm) Pipetype

Yield Strength (SMYS) Safety Factor

Length of Segment (m)

25.00 ERW 120 0.120 0.5%

23.80 ERW 4,724 4.724 19.4%

17.50 ERW 5,987 5.987 24.6%

15.90 ERW 13,523 13.523 55.5%

Wall Thickness Pipetype Total Length (m)Total Length (kilometers) Percent of Total Distance

Nom

inal Wall T

hickness

Repair ReportGas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol


TDW Services, Inc.

Pipeline repairs that are typically detected include:

This table lists all the repairs to the pipeline detected during the inspection.

Repair R

eport

Definition

Length Gives the linear length of the repair.

Type of Repair Describes the type of repair detected during the inspection.

ID# Each repair is automatically assigned a number in the software. This number is provided to assist the user of PIGTRAP software to more easily find any given defect.


- Clamps

- Weld + End

- Clock Spring

- Stopples

- Sleeves

- Half sole

- Patches

Repair ReportGas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol


TDW Services, Inc.

Page 2 of 2

No Repairs have been detected on this pipeline inspection

ID# Distance (m) Length (m) Type of Repair Repair R

eport



TDW Services, Inc

AGM Information SummaryDEFINITIONS

Description Describes the AGM in greater detail. Generally includes only valves and markers.

Latitude This shows the north/south position of the Location as supplied by the customer or recorded by an AGM box. For XYZ mapping runs, these values are the supplied survey points or were calculated by the tool.

Longitude This shows the east/west position of the Location as supplied by the customer or recorded by an AGM box. For XYZ mapping runs, these values are the supplied survey points or were calculated by the tool.

ID# Each location is automatically assigned a number in the software. This number is provided to assist the user of PIGTRAP software to more easily find any given defect.



This table includes all values and above ground marker sites in the inspection run.

AG

M Inform

ation Sum

mary

Zeroes in Latitude and Longitude mean that no data was supplied by the customer. Calculated or estimated values can be viewed in the Pipe Listing report.



TDW Services, Inc

AGM Information Summary

Page 2 of 2

Markers 0

Valves 2

TYPE NUMBER

10000005 74899.81 24353.73 Valve (Receiver), SV-6 Halol 22.48802000 73.49245000

10000000 34069.78 0.00 Valve (Launcher), IP-2 Sherpura 22.66249000 73.64448000

ID# Time Distance(m) Description Latitude Longitude

AG

M Inform

ation Sum

mary

TDW Services, Inc.



Miscellaneous


Memo A description of the entry.

ID# Each miscellaneous note is automatically assigned a number in the software. This number is provided to assist the user of PIGTRAP software to more easily find any given defect.


There are occasions when special notations or circumstances require the addition of a note. These notes are included in this table for your reference.

DEFINITIONS

Miscellaneous

Sensor problems

Noting locations where anomalous sensor readings occurred.

Tool stops/starts

All tools are setup on a time-based system. When the tool stops, it continues to record, although not moving. When the tool moves very slowly, it is possible that its movement is not detected, and therefore, reported distances may appear shorter than actual. Many stops and starts may affect the overall distance accuracy of the tool.

Mill anomaly The process of manufacturing pipe can often leave indications in the pipe wall. Typically these anomalies are not detrimental, and are identified for the benefit of the client.

Gap or dent in casing

When the casing is not welded, or when a gap occurs in the weld, this signature is detected by the tool, and identified with a Misc. remark.

Inclusion An anomaly in the cross section of the pipeline. Inclusions may be detrimental if they protrude through the pipe wall.

MEMO EXAMPLES

TDW Services, Inc.



Miscellaneous

Page 2 of 2

12000001 85,283.14 24,365.30 End Run Tickle

12000000 443.38 -9.57 Begin Run Tickle

ID# Time Distance (m) Memo

Misc listings 2

Total Number

Miscellaneous

Pipeline Listing ReportGas Authority of India Ltd. - K360HD 48" IP-2, Sherpura to SV-6, Halol


TDW Services, Inc.

% Depth Predicted depth of the defect as a percentage of nominal wall.

Orientation: Deg. / O'Clock

Orientation is reported in degrees or o’clock (0 degrees/12:00 at top of pipe) as viewed looking downstream.

Longitude If GPS coordinates were provided for launch, receive and AGMs, this provides the predicted Longitude reading of the location from the first GPS reading based on INS readings obtained by the tool during the inspection.

Length or Pipe Thickness

Predicted length of the defect, reported in either inches or millimeters – or if a wall thickness change, the new wall thickness begins at this point.

% Est. Press. (P'/P) or Temp. Factor

Percent of maximum established pressure, this is calculated by dividing the calculated safe pressure of the defect (P') by the current established maximum operating pressure of the pipeline (P). For Magpie reporting, P is either established MOP provided by the customer or the calculated pressure rating for the pipe (P). Percentages less than 100% are considered pressure reducing.

P' (Calc. Safe Max. Operating Pressure)

or Safety Factor

Calculated safe maximum operating pressure for the pipeline segment as calculated based on information provided by the Customer. Magpie software uses either ASME B31G, MODIFIED ASME B31G or Z662-99 to calculate the calculated safe maximum allowable operating pressure (P’) of the pipeline at a metal loss area.

Width or Yield Strength

Predicted width of the defect, reported in either inches or millimeters – or if a wall thickness change, the new SMYS begins at this point.

Distance Given in either feet or meters, based on contractual agreements, this is the absolute distance from launch.

Description Describes the event at the particular location. Identifies the type of the descriptive, being a weld, location, pipe thickness change, etc.

ID# Each item is automatically assigned a number in the software. This number is provided to assist the user of PIGTRAP software to more easily find any given defect.

Joint # This unique number identifies the girth weld number.

Latitude If GPS coordinates were provided for launch, receive and AGMs, this provides the predicted Latitude reading of the location from the first GPS reading based on INS readings obtained by the tool during the inspection.

D/S Weld Dist. The distance to the downstream (D/S) weld (in feet or meters).

U/S Weld Dist. The distance to the upstream (U/S) weld (in feet or meters).

The Pipeline Listing Report presents all detected pipeline data in sequential order, beginning at launcher and ending at the receiver. The table includes welds, locations, metal loss defects, AGMs, wall thickness changes, etc.

DEFINITIONS

Pipeline Listing R

eport



TDW Services, Inc.

Page 2 of 73Criteria:

290 WELD 194.6 290 0.0 11.9 22.66388802 73.64631947

280 WELD 182.7 280 0.0 11.8 22.66348979 73.64650775

310 WELD 219.8 310 0.0 12.1 22.66455603 73.64565344

300 WELD 206.4 300 0.0 13.4 22.66425779 73.64603514

250 WELD 146.6 250 0.0 11.8 22.66229787 73.64643617

240 WELD 134.3 240 0.0 12.2 22.66194252 73.64622297

270 WELD 170.6 270 0.0 12.1 22.66307087 73.64658716

260 WELD 158.3 260 0.0 12.3 22.66267749 73.64655836

360 WELD 280.6 360 0.0 13.1 22.66390414 73.64224743

330 WELD 244.1 330 0.0 10.1 22.66489669 73.64452445

320 WELD 231.9 320 0.0 12.2 22.66479361 73.64510237

350 WELD 267.2 350 0.0 13.4 22.66464991 73.64317940

340 WELD 254.3 340 0.0 12.9 22.66485255 73.64385149

230 WELD 121.4 230 0.0 12.9 22.66166789 73.64593727

120 WELD 0.2 120 0.0 1.3 22.66258139 73.64446161

10000000 Valve (Launcher), IP-2 Sherpura

0.0 110 0.3 0.2 22.66249000 73.64448000

140 WELD 9.0 140 0.0 13.8 22.66276811 73.64438160

130 WELD 1.6 130 0.0 7.4 22.66267392 73.64443788

12000000 Begin Run Tickle -9.6 0 - 9.3 0.00000000 0.00000000

110 WELD -0.3 110 0.0 0.5 0.00000000 0.00000000

11000000 WT CHANGE -0.3 110 0.0 0.0 0.00000000 0.00000000 17.50 70000 0.72

200 WELD 85.0 200 0.0 13.1 22.66133977 73.64483059

190 WELD 72.6 190 0.0 12.4 22.66144135 73.64445413

220 WELD 109.1 220 0.0 12.3 22.66149372 73.64562666

210 WELD 98.2 210 0.0 10.9 22.66135735 73.64522820

160 WELD 35.1 160 0.0 12.6 22.66234493 73.64382676

150 WELD 22.7 150 0.0 12.4 22.66275682 73.64409020

180 WELD 60.0 180 0.0 12.6 22.66164446 73.64412422

170 WELD 47.7 170 0.0 12.3 22.66195931 73.64387666

ID# DescriptionDistance

(m) Joint #

U/S Weld Dist.

D/S Weld Dist. Latitude Longitude

Orientation(Deg / O’Clock)

Depth (%)

Length or Pipe

ThicknessWidth or

SMYS

Failure Pressure or Safety

FactorPfail/

MAOP



TDW Services, Inc.


370 WELD 293.7 370 0.0 12.4 22.66214821 73.64173042

390 WELD 318.7 390 0.0 13.6 22.65974231 73.64371527

380 WELD 306.1 380 0.0 12.6 22.66042705 73.64263185

10000001 Bend left 585.7 600 2.8 5.5 22.65920285 73.65101962 0 12:00

600 WELD 581.4 600 0.0 8.3 22.65920499 73.65101871

610 WELD 589.7 610 0.0 10.5 22.65898335 73.65111346

11000002 WT CHANGE 589.7 610 0.0 0.0 22.65919868 73.65102140 17.50 70000 0.72

580 WELD 556.8 580 0.0 12.7 22.65954397 73.65071865

570 WELD 544.1 570 0.0 12.8 22.65965529 73.65052805

11000001 WT CHANGE 581.4 600 0.0 8.3 22.65937498 73.65088174 25.00 70000 0.72

590 WELD 569.5 590 0.0 11.9 22.65938280 73.65087544

630 WELD 612.8 630 0.0 9.2 22.65872635 73.65138811

620 WELD 600.2 620 0.0 12.6 22.65887194 73.65125068

560 WELD 531.1 560 0.0 13.0 22.65972243 73.65031614

450 WELD 391.3 450 0.0 12.6 22.65945846 73.64715388

440 WELD 379.5 440 0.0 11.8 22.65939712 73.64673095

470 WELD 416.4 470 0.0 12.2 22.65957509 73.64787148

460 WELD 403.9 460 0.0 12.5 22.65949871 73.64750504

410 WELD 345.1 410 0.0 11.7 22.65941163 73.64539139

400 WELD 332.2 400 0.0 12.9 22.65948686 73.64463566

430 WELD 366.9 430 0.0 12.6 22.65938872 73.64637013

420 WELD 356.8 420 0.0 10.1 22.65939467 73.64594451

530 WELD 492.2 530 0.0 13.1 22.65978704 73.64959086

520 WELD 478.8 520 0.0 13.3 22.65978598 73.64934141

550 WELD 518.4 550 0.0 12.7 22.65975794 73.65008371

540 WELD 505.3 540 0.0 13.1 22.65977135 73.64983881

490 WELD 441.2 490 0.0 12.5 22.65966179 73.64848860

480 WELD 428.6 480 0.0 12.6 22.65963539 73.64820103

510 WELD 466.4 510 0.0 12.5 22.65975278 73.64906759

500 WELD 453.6 500 0.0 12.7 22.65970656 73.64878287


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


890 WELD 901.4 890 0.0 12.2 22.65523486 73.65171012

880 WELD 889.1 880 0.0 12.3 22.65548418 73.65169875

900 WELD 913.6 900 0.0 8.4 22.65497822 73.65171222

10000002 Bend right 874.9 860 2.0 3.8 22.65568465 73.65153448 0 12:00

860 WELD 871.3 860 0.0 5.8 22.65568524 73.65153278

870 WELD 877.2 870 0.0 11.9 22.65564202 73.65165850

11000004 WT CHANGE 877.1 870 0.0 0.0 22.65568358 73.65153760 17.50 70000 0.72

11000003 WT CHANGE 871.3 860 0.0 0.1 22.65544553 73.65111843 23.80 70000 0.72

750 WELD 746.8 750 0.0 12.9 22.65596942 73.65144307

740 WELD 733.7 740 0.0 13.0 22.65614503 73.65149423

770 WELD 772.3 770 0.0 12.9 22.65547831 73.65102473

760 WELD 759.6 760 0.0 12.7 22.65572266 73.65123907

710 WELD 702.7 710 0.0 12.4 22.65700361 73.65191051

700 WELD 690.5 700 0.0 12.2 22.65731414 73.65196585

730 WELD 727.4 730 0.0 6.3 22.65642474 73.65165377

720 WELD 715.1 720 0.0 12.3 22.65670801 73.65180232

830 WELD 849.7 830 0.0 5.7 22.65520909 73.65067671

820 WELD 836.6 820 0.0 13.1 22.65503686 73.65041227

850 WELD 868.7 850 0.0 2.6 22.65544441 73.65111650

840 WELD 855.4 840 0.0 13.3 22.65539610 73.65095438

790 WELD 797.7 790 0.0 12.5 22.65514054 73.65062754

780 WELD 785.2 780 0.0 12.5 22.65531277 73.65083552

810 WELD 823.3 810 0.0 13.4 22.65498067 73.65036647

800 WELD 810.2 800 0.0 13.1 22.65506297 73.65050210

670 WELD 659.8 670 0.0 3.8 22.65801761 73.65187947

660 WELD 646.6 660 0.0 13.2 22.65822508 73.65177716

690 WELD 677.4 690 0.0 13.1 22.65761689 73.65197089

680 WELD 663.6 680 0.0 13.8 22.65773599 73.65190605

650 WELD 634.4 650 0.0 12.3 22.65840509 73.65164671

640 WELD 622.0 640 0.0 12.4 22.65855277 73.65152804


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


910 WELD 922.0 910 0.0 10.7 22.65472355 73.65170887

970 WELD 983.9 970 0.0 11.7 22.65331096 73.65134312

960 WELD 969.7 960 0.0 14.2 22.65363593 73.65156160

990 WELD 1,007.6 990 0.0 12.5 22.65269090 73.65075926

980 WELD 995.6 980 0.0 12.0 22.65296974 73.65103545

930 WELD 941.4 930 0.0 4.8 22.65428623 73.65171008

920 WELD 932.8 920 0.0 8.6 22.65452795 73.65172815

950 WELD 956.8 950 0.0 12.9 22.65391695 73.65169848

940 WELD 946.2 940 0.0 10.6 22.65408075 73.65170940

1180 WELD 1,235.5 1180 0.0 11.8 22.65159030 73.64962963

1170 WELD 1,223.8 1170 0.0 11.7 22.65142670 73.64899851

1200 WELD 1,258.7 1200 0.0 11.7 22.65189933 73.65089842

1190 WELD 1,247.3 1190 0.0 11.4 22.65176755 73.65029561

1160 WELD 1,212.2 1160 0.0 11.6 22.65128974 73.64838106

1050 WELD 1,080.9 1050 0.0 12.2 22.65144117 73.64878301

1040 WELD 1,068.2 1040 0.0 12.7 22.65158576 73.64909980

1070 WELD 1,106.4 1070 0.0 12.7 22.65123369 73.64818288

1060 WELD 1,093.2 1060 0.0 13.2 22.65132327 73.64846131

1010 WELD 1,031.8 1010 0.0 12.5 22.65217394 73.65011401

1000 WELD 1,020.1 1000 0.0 11.6 22.65242389 73.65045196

1030 WELD 1,056.5 1030 0.0 11.7 22.65175795 73.64944209

1020 WELD 1,044.2 1020 0.0 12.3 22.65195639 73.64979199

1130 WELD 1,177.2 1130 0.0 11.5 22.65106643 73.64732162

1120 WELD 1,165.8 1120 0.0 11.3 22.65106596 73.64735135

1150 WELD 1,200.4 1150 0.0 11.8 22.65118223 73.64785699

1140 WELD 1,188.7 1140 0.0 11.7 22.65110949 73.64751355

1090 WELD 1,131.7 1090 0.0 11.6 22.65110899 73.64765971

1080 WELD 1,119.1 1080 0.0 12.6 22.65115990 73.64789509

1110 WELD 1,154.5 1110 0.0 11.3 22.65106571 73.64737845

1100 WELD 1,143.3 1100 0.0 11.2 22.65108689 73.64750410


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


1220 WELD 1,282.2 1220 0.0 11.6 22.65204547 73.65185570

1210 WELD 1,270.4 1210 0.0 11.8 22.65199843 73.65141962

1240 WELD 1,305.3 1240 0.0 11.4 22.65178028 73.65218646

1230 WELD 1,293.8 1230 0.0 11.5 22.65196029 73.65209791

1300 WELD 1,374.4 1300 0.0 11.7 22.64992249 73.65078202

1290 WELD 1,362.7 1290 0.0 11.7 22.65024020 73.65112060

1320 WELD 1,397.6 1320 0.0 11.4 22.64931156 73.65001597

1310 WELD 1,386.1 1310 0.0 11.5 22.64961193 73.65041467

1260 WELD 1,328.3 1260 0.0 11.5 22.65122461 73.65197884

1250 WELD 1,316.6 1250 0.0 11.7 22.65153438 73.65215565

1280 WELD 1,351.1 1280 0.0 11.6 22.65056277 73.65143866

1270 WELD 1,339.8 1270 0.0 11.3 22.65089999 73.65175064

1330 WELD 1,409.0 1330 0.0 11.9 22.64902959 73.64959669

1500 WELD 1,606.6 1500 0.0 11.7 22.64759936 73.64539659

1390 WELD 1,478.2 1390 0.0 11.8 22.64781275 73.64664482

1380 WELD 1,466.4 1380 0.0 11.8 22.64794750 73.64715221

1410 WELD 1,501.7 1410 0.0 11.8 22.64764888 73.64568592

1400 WELD 1,490.0 1400 0.0 11.7 22.64771587 73.64614792

1350 WELD 1,432.3 1350 0.0 11.3 22.64852169 73.64865097

1340 WELD 1,420.9 1340 0.0 11.4 22.64876967 73.64914658

1370 WELD 1,455.0 1370 0.0 11.4 22.64811107 73.64765973

1360 WELD 1,443.6 1360 0.0 11.3 22.64830380 73.64815943

1470 WELD 1,571.8 1470 0.0 11.7 22.64759165 73.64427894

1460 WELD 1,560.4 1460 0.0 11.4 22.64758040 73.64420016

1490 WELD 1,595.2 1490 0.0 11.4 22.64759811 73.64482000

1480 WELD 1,583.5 1480 0.0 11.7 22.64759461 73.64448337

1430 WELD 1,525.2 1430 0.0 11.4 22.64757874 73.64487628

1420 WELD 1,513.5 1420 0.0 11.6 22.64759740 73.64523000

1450 WELD 1,548.4 1450 0.0 12.0 22.64756862 73.64427382

1440 WELD 1,536.6 1440 0.0 11.8 22.64756890 73.64454238


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


1560 WELD 1,677.3 1560 0.0 11.7 22.64763776 73.64985223

1550 WELD 1,665.6 1550 0.0 11.7 22.64767987 73.64935479

1580 WELD 1,700.8 1580 0.0 11.7 22.64745635 73.65052675

1570 WELD 1,689.0 1570 0.0 11.7 22.64756739 73.65024815

1520 WELD 1,630.3 1520 0.0 11.7 22.64761219 73.64703342

1510 WELD 1,618.3 1510 0.0 12.0 22.64760015 73.64616859

1540 WELD 1,653.7 1540 0.0 11.8 22.64766192 73.64866748

1530 WELD 1,642.0 1530 0.0 11.7 22.64763489 73.64788998

1640 WELD 1,770.6 1640 0.0 11.8 22.64610420 73.65007878

1630 WELD 1,758.9 1630 0.0 11.7 22.64635955 73.65028479

1660 WELD 1,794.2 1660 0.0 11.7 22.64558999 73.64960409

1650 WELD 1,782.4 1650 0.0 11.8 22.64584681 73.64985029

1600 WELD 1,724.2 1600 0.0 11.7 22.64710006 73.65070508

1590 WELD 1,712.5 1590 0.0 11.8 22.64730650 73.65069749

1620 WELD 1,747.4 1620 0.0 11.5 22.64661325 73.65047008

1610 WELD 1,736.0 1610 0.0 11.4 22.64685621 73.65059083

1720 WELD 1,863.8 1720 0.0 11.4 22.64422774 73.64669618

1710 WELD 1,852.0 1710 0.0 11.8 22.64440762 73.64727031

1740 WELD 1,886.7 1740 0.0 11.3 22.64397773 73.64552316

1730 WELD 1,875.2 1730 0.0 11.5 22.64408652 73.64610043

1680 WELD 1,817.6 1680 0.0 11.6 22.64506579 73.64876177

1670 WELD 1,805.9 1670 0.0 11.7 22.64532267 73.64920073

1700 WELD 1,840.3 1700 0.0 11.7 22.64459731 73.64780466

1690 WELD 1,829.2 1690 0.0 11.1 22.64482047 73.64831829

1800 WELD 1,955.8 1800 0.0 11.4 22.64382083 73.64259851

1790 WELD 1,944.5 1790 0.0 11.3 22.64379852 73.64290875

1760 WELD 1,909.8 1760 0.0 11.3 22.64382868 73.64438139

1750 WELD 1,898.1 1750 0.0 11.7 22.64388526 73.64493264

1780 WELD 1,932.9 1780 0.0 11.6 22.64378483 73.64332973

1770 WELD 1,921.1 1770 0.0 11.8 22.64379970 73.64384411


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


2050 WELD 2,246.2 2050 0.0 11.2 22.64179766 73.64585425

2040 WELD 2,234.8 2040 0.0 11.4 22.64189114 73.64508114

2070 WELD 2,268.8 2070 0.0 14.2 22.64163118 73.64728142

2060 WELD 2,257.3 2060 0.0 11.5 22.64171406 73.64660912

2010 WELD 2,201.0 2010 0.0 11.6 22.64193223 73.64386054

2000 WELD 2,186.9 2000 0.0 14.2 22.64192278 73.64402133

2030 WELD 2,223.8 2030 0.0 11.0 22.64195327 73.64428733

2020 WELD 2,212.6 2020 0.0 11.1 22.64196394 73.64388086

2090 WELD 2,296.3 2090 0.0 11.4 22.64124941 73.64749661

2080 WELD 2,283.1 2080 0.0 13.2 22.64148320 73.64761517

2100 WELD 2,307.7 2100 0.0 11.6 22.64101281 73.64720677

1890 WELD 2,059.9 1890 0.0 12.1 22.64342708 73.64645019

1880 WELD 2,048.3 1880 0.0 11.6 22.64352919 73.64576263

1910 WELD 2,083.0 1910 0.0 11.6 22.64319280 73.64750041

1900 WELD 2,072.0 1900 0.0 11.0 22.64331944 73.64703334

1850 WELD 2,013.4 1850 0.0 11.8 22.64374011 73.64350317

1840 WELD 2,002.2 1840 0.0 11.2 22.64380064 73.64289142

1870 WELD 2,036.7 1870 0.0 11.6 22.64361888 73.64496899

1860 WELD 2,025.2 1860 0.0 11.5 22.64368229 73.64415546

1970 WELD 2,152.1 1970 0.0 11.5 22.64203192 73.64558307

1960 WELD 2,141.2 1960 0.0 11.0 22.64217798 73.64624409

1990 WELD 2,175.4 1990 0.0 11.5 22.64192128 73.64439497

1980 WELD 2,163.6 1980 0.0 11.8 22.64195499 73.64495693

1930 WELD 2,106.2 1930 0.0 11.5 22.64281768 73.64759413

1920 WELD 2,094.5 1920 0.0 11.7 22.64301999 73.64763675

1950 WELD 2,130.1 1950 0.0 11.0 22.64237480 73.64692656

1940 WELD 2,117.7 1940 0.0 12.4 22.64259598 73.64735602

1830 WELD 1,990.3 1830 0.0 11.9 22.64385031 73.64243296

1820 WELD 1,978.7 1820 0.0 11.6 22.64385550 73.64230705

1810 WELD 1,967.3 1810 0.0 11.5 22.64384358 73.64235038


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


2220 WELD 2,453.7 2220 0.0 11.7 22.64013294 73.64702938

2210 WELD 2,439.8 2210 0.0 14.0 22.64023931 73.64619162

2240 WELD 2,476.6 2240 0.0 11.2 22.63969297 73.64661688

2230 WELD 2,465.4 2230 0.0 11.2 22.63990902 73.64695511

2180 WELD 2,400.1 2180 0.0 11.3 22.64046364 73.64362320

2170 WELD 2,388.5 2170 0.0 11.6 22.64045880 73.64352894

2200 WELD 2,425.5 2200 0.0 14.2 22.64032975 73.64517065

2190 WELD 2,411.4 2190 0.0 14.1 22.64042310 73.64429780

2300 WELD 2,548.5 2300 0.0 11.5 22.63916562 73.64281765

2290 WELD 2,537.1 2290 0.0 11.4 22.63915619 73.64282051

2320 WELD 2,571.9 2320 0.0 11.6 22.63915438 73.64318985

2310 WELD 2,560.0 2310 0.0 11.9 22.63917122 73.64285087

2260 WELD 2,499.2 2260 0.0 12.1 22.63934457 73.64522560

2250 WELD 2,487.8 2250 0.0 11.4 22.63950670 73.64593429

2280 WELD 2,525.5 2280 0.0 11.6 22.63914038 73.64365139

2270 WELD 2,511.3 2270 0.0 14.2 22.63920534 73.64448973

2160 WELD 2,377.0 2160 0.0 11.5 22.64045109 73.64352590

2130 WELD 2,342.4 2130 0.0 11.7 22.64052660 73.64518215

2120 WELD 2,330.9 2120 0.0 11.6 22.64062695 73.64591291

2150 WELD 2,365.5 2150 0.0 11.4 22.64044484 73.64391764

2140 WELD 2,354.1 2140 0.0 11.4 22.64045693 73.64445896

2110 WELD 2,319.3 2110 0.0 11.5 22.64080409 73.64661135

2370 WELD 2,626.7 2370 0.0 11.7 22.63892634 73.64660040

2360 WELD 2,614.1 2360 0.0 12.6 22.63906323 73.64649042

2390 WELD 2,646.2 2390 0.0 5.5 22.63899265 73.64711817

2380 WELD 2,638.4 2380 0.0 7.8 22.63895798 73.64679227

2340 WELD 2,595.3 2340 0.0 12.9 22.63905327 73.64476854

2330 WELD 2,583.5 2330 0.0 11.8 22.63909980 73.64394255

11000005 WT CHANGE 2,614.1 2360 0.0 0.0 22.63904303 73.64556143 23.80 70000 0.72

2350 WELD 2,608.2 2350 0.0 6.0 22.63904292 73.64555614


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


2650 WELD 2,933.6 2650 0.0 12.1 22.63495829 73.64457919

2640 WELD 2,922.0 2640 0.0 11.6 22.63495127 73.64465313

2670 WELD 2,956.6 2670 0.0 11.5 22.63488043 73.64581797

2660 WELD 2,945.7 2660 0.0 10.8 22.63495717 73.64498352

2630 WELD 2,910.5 2630 0.0 11.4 22.63501052 73.64533502

2520 WELD 2,782.7 2520 0.0 11.1 22.63737780 73.65087233

2510 WELD 2,771.2 2510 0.0 11.5 22.63762895 73.65117418

2540 WELD 2,804.7 2540 0.0 11.6 22.63687268 73.65020391

2530 WELD 2,793.8 2530 0.0 11.0 22.63711333 73.65048536

2480 WELD 2,738.2 2480 0.0 11.0 22.63810061 73.65068092

2470 WELD 2,726.8 2470 0.0 11.3 22.63819207 73.65024494

2500 WELD 2,760.3 2500 0.0 10.9 22.63783733 73.65122665

2490 WELD 2,749.2 2490 0.0 11.1 22.63798916 73.65104005

2600 WELD 2,873.3 2600 0.0 14.2 22.63549335 73.64761746

2590 WELD 2,861.9 2590 0.0 11.4 22.63570153 73.64823494

2620 WELD 2,898.9 2620 0.0 11.7 22.63513392 73.64606767

2610 WELD 2,887.5 2610 0.0 11.4 22.63530059 73.64696125

2560 WELD 2,827.7 2560 0.0 11.6 22.63641678 73.64979809

2550 WELD 2,816.4 2550 0.0 11.3 22.63665170 73.65003589

2580 WELD 2,850.7 2580 0.0 11.2 22.63592760 73.64884132

2570 WELD 2,839.3 2570 0.0 11.4 22.63617076 73.64935767

2460 WELD 2,715.9 2460 0.0 10.9 22.63827656 73.64975073

2430 WELD 2,682.0 2430 0.0 11.5 22.63850798 73.64774157

2420 WELD 2,668.8 2420 0.0 13.2 22.63859962 73.64709411

2450 WELD 2,704.9 2450 0.0 11.0 22.63835528 73.64917677

2440 WELD 2,693.4 2440 0.0 11.5 22.63842986 73.64853495

2400 WELD 2,651.6 2400 0.0 6.9 22.63882346 73.64644037

11000006 WT CHANGE 2,651.6 2400 0.0 0.0 22.63899148 73.64711351 17.50 70000 0.72

2410 WELD 2,658.5 2410 0.0 10.2 22.63870916 73.64671080

11000007 WT CHANGE 2,658.3 2400 0.0 0.3 22.63882119 73.64644572 15.90 70000 0.72


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


2860 WELD 3,184.1 2860 0.0 10.7 22.63237940 73.64627955

2850 WELD 3,170.7 2850 0.0 13.4 22.63257074 73.64634331

2880 WELD 3,206.3 2880 0.0 11.6 22.63197452 73.64611487

2870 WELD 3,194.8 2870 0.0 11.6 22.63216496 73.64620231

2820 WELD 3,135.2 2820 0.0 11.2 22.63318366 73.64667564

2810 WELD 3,123.8 2810 0.0 11.4 22.63338167 73.64674934

2840 WELD 3,159.9 2840 0.0 10.8 22.63278692 73.64642759

2830 WELD 3,146.4 2830 0.0 13.5 22.63298236 73.64650501

2930 WELD 3,259.4 2930 0.0 12.3 22.63173101 73.64561644

11000008 WT CHANGE 3,259.4 2930 0.0 0.0 22.63177279 73.64493164 17.50 70000 0.72

2950 WELD 3,284.3 2950 0.0 12.1 22.63140855 73.64566995

2940 WELD 3,271.7 2940 0.0 12.6 22.63161100 73.64603140

2900 WELD 3,229.2 2900 0.0 10.7 22.63178250 73.64516390

2890 WELD 3,217.9 2890 0.0 11.3 22.63180021 73.64555623

2920 WELD 3,251.4 2920 0.0 8.0 22.63177322 73.64492460

2910 WELD 3,239.9 2910 0.0 11.5 22.63177164 73.64482050

2800 WELD 3,112.5 2800 0.0 11.4 22.63357412 73.64670745

2690 WELD 2,979.6 2690 0.0 13.9 22.63468918 73.64715583

2680 WELD 2,968.1 2680 0.0 11.5 22.63480580 73.64655293

2710 WELD 3,004.9 2710 0.0 11.6 22.63428936 73.64728137

2700 WELD 2,993.5 2700 0.0 11.5 22.63450668 73.64729094

2770 WELD 3,077.6 2770 0.0 11.3 22.63376961 73.64457684

2760 WELD 3,063.4 2760 0.0 14.2 22.63376837 73.64494326

2790 WELD 3,100.9 2790 0.0 11.5 22.63368363 73.64598514

2780 WELD 3,088.9 2780 0.0 12.0 22.63377986 73.64522232

2730 WELD 3,028.1 2730 0.0 11.5 22.63390687 73.64652752

2720 WELD 3,016.5 2720 0.0 11.6 22.63408834 73.64719333

2750 WELD 3,051.1 2750 0.0 12.3 22.63378407 73.64535247

2740 WELD 3,039.7 2740 0.0 11.5 22.63381490 73.64583478

2960 WELD 3,296.4 2960 0.0 12.0 22.63132685 73.64489968


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


3160 WELD 3,527.8 3160 0.0 11.9 22.63091911 73.63979826

3150 WELD 3,515.8 3150 0.0 12.0 22.63118187 73.63893962

3180 WELD 3,551.9 3180 0.0 13.0 22.63044133 73.64142054

3170 WELD 3,539.7 3170 0.0 12.1 22.63067118 73.64063551

3130 WELD 3,492.5 3130 0.0 11.7 22.63149549 73.63783154

3120 WELD 3,480.2 3120 0.0 12.3 22.63164031 73.63800369

3140 WELD 3,504.2 3140 0.0 11.7 22.63146675 73.63806593

11000010 WT CHANGE 3,504.1 3140 0.0 0.1 22.63149424 73.63784174 17.50 70000 0.72

3240 WELD 3,626.5 3240 0.0 11.9 22.62934647 73.64590940

3230 WELD 3,614.4 3230 0.0 12.1 22.62949514 73.64523865

3200 WELD 3,577.9 3200 0.0 13.5 22.63001906 73.64301207

3190 WELD 3,564.8 3190 0.0 13.1 22.63022580 73.64220064

3220 WELD 3,602.4 3220 0.0 12.0 22.62964807 73.64460639

3210 WELD 3,591.4 3210 0.0 11.0 22.62982736 73.64380927

11000009 WT CHANGE 3,480.2 3120 0.0 0.0 22.63174824 73.63784768 23.80 70000 0.72

3010 WELD 3,359.1 3010 0.0 12.1 22.63132226 73.64214337

3000 WELD 3,346.5 3000 0.0 12.7 22.63128837 73.64264775

3030 WELD 3,383.3 3030 0.0 12.0 22.63139333 73.64114389

3020 WELD 3,371.2 3020 0.0 12.1 22.63135711 73.64164221

2970 WELD 3,308.4 2970 0.0 11.4 22.63127942 73.64419944

2990 WELD 3,333.1 2990 0.0 13.3 22.63126199 73.64312776

2980 WELD 3,319.9 2980 0.0 13.2 22.63125917 73.64356636

3090 WELD 3,456.7 3090 0.0 11.8 22.63183786 73.63764625

3080 WELD 3,444.9 3080 0.0 11.8 22.63172204 73.63830374

3110 WELD 3,471.0 3110 0.0 9.2 22.63175273 73.63784119

3100 WELD 3,468.5 3100 0.0 2.5 22.63194925 73.63702187

3050 WELD 3,407.3 3050 0.0 12.2 22.63149000 73.64008738

3040 WELD 3,395.2 3040 0.0 12.1 22.63143789 73.64062379

3070 WELD 3,431.8 3070 0.0 13.1 22.63162994 73.63893073

3060 WELD 3,419.5 3060 0.0 12.3 22.63155368 73.63952299


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


3490 WELD 3,932.7 3490 0.0 12.4 22.62616768 73.65153985

3480 WELD 3,920.9 3480 0.0 11.8 22.62614897 73.65149359

3510 WELD 3,955.8 3510 0.0 12.2 22.62633227 73.65278177

3500 WELD 3,945.1 3500 0.0 10.7 22.62624013 73.65209310

3450 WELD 3,883.3 3450 0.0 13.3 22.62645485 73.65292788

3440 WELD 3,869.7 3440 0.0 13.7 22.62668574 73.65358385

3470 WELD 3,909.1 3470 0.0 11.8 22.62615110 73.65160786

3460 WELD 3,896.6 3460 0.0 12.5 22.62626224 73.65218046

3530 WELD 3,981.7 3530 0.0 12.6 22.62642124 73.65423096

3520 WELD 3,968.0 3520 0.0 13.7 22.62639579 73.65347909

3540 WELD 3,994.2 3540 0.0 11.9 22.62615311 73.65398670

3430 WELD 3,858.2 3430 0.0 11.5 22.62695836 73.65410716

3320 WELD 3,723.2 3320 0.0 11.5 22.62841266 73.65071151

3310 WELD 3,711.2 3310 0.0 12.1 22.62851064 73.65018739

3340 WELD 3,746.9 3340 0.0 12.8 22.62822606 73.65173447

3330 WELD 3,734.7 3330 0.0 12.2 22.62831785 73.65124186

3280 WELD 3,675.6 3280 0.0 12.6 22.62883113 73.64846985

3270 WELD 3,663.4 3270 0.0 12.2 22.62895063 73.64782294

3300 WELD 3,699.6 3300 0.0 11.6 22.62861202 73.64966418

3290 WELD 3,688.3 3290 0.0 11.3 22.62871912 73.64906691

3400 WELD 3,821.7 3400 0.0 12.4 22.62764484 73.65438933

3390 WELD 3,808.5 3390 0.0 13.2 22.62779979 73.65414132

3420 WELD 3,846.6 3420 0.0 11.6 22.62721408 73.65434616

3410 WELD 3,834.1 3410 0.0 12.4 22.62745948 73.65451671

3360 WELD 3,771.8 3360 0.0 11.6 22.62805028 73.65276665

3350 WELD 3,759.8 3350 0.0 12.1 22.62813687 73.65224494

3380 WELD 3,795.1 3380 0.0 13.4 22.62788194 73.65369785

3370 WELD 3,783.5 3370 0.0 11.7 22.62796543 73.65324556

3260 WELD 3,650.5 3260 0.0 12.9 22.62907528 73.64719740

3250 WELD 3,638.4 3250 0.0 12.1 22.62920657 73.64656596


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


3570 WELD 4,022.0 3570 0.0 12.6 22.62534827 73.65257915

3560 WELD 4,018.3 3560 0.0 3.6 22.62561724 73.65322096

11000011 WT CHANGE 4,048.4 3590 0.0 0.0 22.62520402 73.65238374 23.80 70000 0.72

3580 WELD 4,034.6 3580 0.0 13.8 22.62520654 73.65239567

3550 WELD 4,006.2 3550 0.0 12.2 22.62588664 73.65366416

3800 WELD 4,294.1 3800 0.0 12.0 22.62391630 73.65266676

3790 WELD 4,281.4 3790 0.0 12.8 22.62387401 73.65250779

3820 WELD 4,319.2 3820 0.0 12.6 22.62406055 73.65333975

3810 WELD 4,306.1 3810 0.0 13.1 22.62398738 73.65297947

3760 WELD 4,245.0 3760 0.0 12.0 22.62388052 73.65273011

3750 WELD 4,233.2 3750 0.0 11.8 22.62392462 73.65299353

3780 WELD 4,269.1 3780 0.0 12.3 22.62384751 73.65243586

3770 WELD 4,257.0 3770 0.0 12.1 22.62384722 73.65250592

3740 WELD 4,221.5 3740 0.0 11.7 22.62390188 73.65293855

3630 WELD 4,097.7 3630 0.0 11.7 22.62430280 73.65177161

3620 WELD 4,085.6 3620 0.0 12.1 22.62455485 73.65217071

3650 WELD 4,121.0 3650 0.0 11.3 22.62382894 73.65108595

3640 WELD 4,109.4 3640 0.0 11.5 22.62405753 73.65135554

3600 WELD 4,060.8 3600 0.0 12.4 22.62498297 73.65235213

3590 WELD 4,048.4 3590 0.0 12.4 22.62507816 73.65178748

11000012 WT CHANGE 4,085.6 3620 0.0 0.1 22.62479949 73.65249898 17.50 70000 0.72

3610 WELD 4,073.2 3610 0.0 12.4 22.62480584 73.65250751

3710 WELD 4,186.4 3710 0.0 11.6 22.62380274 73.65252117

3700 WELD 4,174.6 3700 0.0 11.8 22.62376407 73.65225345

3730 WELD 4,209.6 3730 0.0 11.9 22.62386475 73.65277349

3720 WELD 4,198.0 3720 0.0 11.6 22.62384745 73.65272992

3670 WELD 4,143.7 3670 0.0 10.6 22.62391061 73.65162895

3660 WELD 4,132.3 3660 0.0 11.4 22.62387199 73.65138256

3690 WELD 4,164.0 3690 0.0 10.6 22.62381400 73.65170943

3680 WELD 4,154.2 3680 0.0 9.8 22.62378763 73.65106010


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


3880 WELD 4,392.7 3880 0.0 12.6 22.62500136 73.65819920

3870 WELD 4,379.6 3870 0.0 13.1 22.62481129 73.65727359

3900 WELD 4,417.9 3900 0.0 11.9 22.62528896 73.65994131

3890 WELD 4,405.3 3890 0.0 12.6 22.62524979 73.65927042

3840 WELD 4,343.8 3840 0.0 12.4 22.62430941 73.65454992

3830 WELD 4,331.8 3830 0.0 12.0 22.62417738 73.65389824

3860 WELD 4,368.2 3860 0.0 11.4 22.62462615 73.65629441

3850 WELD 4,356.2 3850 0.0 12.0 22.62445550 73.65528859

3910 WELD 4,429.9 3910 0.0 12.0 22.62528360 73.66049131

4090 WELD 4,649.6 4090 0.0 13.1 22.62289947 73.65935306

4080 WELD 4,638.0 4080 0.0 11.5 22.62266010 73.65836995

4110 WELD 4,675.0 4110 0.0 12.2 22.62337750 73.66098083

4100 WELD 4,662.7 4100 0.0 12.3 22.62309696 73.66004140

11000013 WT CHANGE 4,638.0 4080 0.0 0.0 22.62303726 73.65926169 23.80 70000 0.72

3970 WELD 4,501.6 3970 0.0 12.4 22.62388423 73.65854865

3960 WELD 4,489.9 3960 0.0 11.7 22.62413505 73.65921092

3990 WELD 4,526.1 3990 0.0 12.0 22.62350430 73.65735422

3980 WELD 4,514.0 3980 0.0 12.1 22.62366141 73.65789333

3930 WELD 4,454.2 3930 0.0 13.2 22.62512378 73.66118245

3920 WELD 4,441.9 3920 0.0 12.3 22.62522368 73.66088624

3950 WELD 4,479.0 3950 0.0 10.9 22.62442452 73.65993804

3940 WELD 4,467.4 3940 0.0 11.6 22.62477875 73.66079596

4050 WELD 4,601.4 4050 0.0 11.4 22.62376556 73.66030281

4040 WELD 4,588.2 4040 0.0 13.2 22.62410086 73.66067472

4070 WELD 4,625.0 4070 0.0 13.0 22.62304169 73.65927219

4060 WELD 4,612.8 4060 0.0 12.2 22.62338527 73.65977071

4010 WELD 4,550.8 4010 0.0 12.3 22.62361921 73.65784473

4000 WELD 4,538.1 4000 0.0 12.7 22.62342203 73.65702870

4030 WELD 4,575.8 4030 0.0 12.4 22.62399758 73.65986403

4020 WELD 4,563.1 4020 0.0 12.7 22.62382506 73.65890283


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


4130 WELD 4,699.5 4130 0.0 12.3 22.62347447 73.66227112

4120 WELD 4,687.2 4120 0.0 12.3 22.62341232 73.66160779

11000014 WT CHANGE 4,724.2 4150 0.0 0.0 22.62352431 73.66290198 17.50 70000 0.72

4140 WELD 4,711.8 4140 0.0 12.4 22.62352340 73.66289101

4200 WELD 4,787.6 4200 0.0 13.1 22.62276770 73.66379876

4190 WELD 4,775.6 4190 0.0 12.0 22.62322216 73.66441752

4220 WELD 4,815.3 4220 0.0 9.7 22.62246334 73.66301701

4210 WELD 4,800.7 4210 0.0 14.6 22.62256916 73.66332675

4160 WELD 4,735.7 4160 0.0 12.1 22.62373736 73.66428918

4150 WELD 4,724.2 4150 0.0 11.5 22.62357340 73.66349652

4180 WELD 4,761.8 4180 0.0 13.8 22.62373446 73.66519588

4170 WELD 4,747.9 4170 0.0 13.9 22.62382419 73.66490893

4400 WELD 5,034.3 4400 0.0 14.1 22.61749864 73.64873284

4390 WELD 5,021.7 4390 0.0 12.5 22.61762656 73.64961612

4280 WELD 4,886.1 4280 0.0 12.6 22.62078791 73.65979382

4270 WELD 4,873.4 4270 0.0 12.7 22.62119662 73.66070590

4300 WELD 4,911.5 4300 0.0 12.7 22.62002716 73.65794158

4290 WELD 4,898.8 4290 0.0 12.8 22.62039814 73.65886604

4240 WELD 4,838.5 4240 0.0 11.2 22.62178856 73.66207427

4230 WELD 4,825.0 4230 0.0 13.5 22.62196167 73.66202293

4260 WELD 4,860.7 4260 0.0 12.7 22.62157054 73.66149222

4250 WELD 4,849.7 4250 0.0 11.0 22.62183951 73.66213667

4360 WELD 4,985.3 4360 0.0 11.6 22.61819836 73.65247185

4350 WELD 4,972.4 4350 0.0 13.0 22.61845113 73.65342437

4380 WELD 5,009.7 4380 0.0 12.1 22.61778523 73.65057159

4370 WELD 4,997.0 4370 0.0 12.7 22.61797217 73.65146781

4320 WELD 4,936.1 4320 0.0 9.6 22.61933200 73.65605727

4310 WELD 4,924.3 4310 0.0 11.8 22.61967157 73.65699749

4340 WELD 4,959.9 4340 0.0 12.4 22.61876628 73.65449074

4330 WELD 4,945.7 4330 0.0 14.3 22.61902328 73.65518739


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


4600 WELD 5,271.9 4600 0.0 11.8 22.61607462 73.65476843

4590 WELD 5,259.8 4590 0.0 12.1 22.61638512 73.65564980

4620 WELD 5,296.9 4620 0.0 12.0 22.61551208 73.65309601

4610 WELD 5,283.7 4610 0.0 13.2 22.61578434 73.65391652

4560 WELD 5,223.3 4560 0.0 12.0 22.61737757 73.65826191

4550 WELD 5,211.2 4550 0.0 12.0 22.61773909 73.65913791

4580 WELD 5,247.3 4580 0.0 12.5 22.61670256 73.65652364

4570 WELD 5,235.2 4570 0.0 12.1 22.61703199 73.65738953

4680 WELD 5,368.2 4680 0.0 9.3 22.61407873 73.64833485

4670 WELD 5,357.5 4670 0.0 10.7 22.61428767 73.64904124

4690 WELD 5,377.5 4690 0.0 11.3 22.61388775 73.64770423

4640 WELD 5,320.9 4640 0.0 12.2 22.61498316 73.65138812

4630 WELD 5,308.9 4630 0.0 12.0 22.61523166 73.65221239

4660 WELD 5,345.7 4660 0.0 11.8 22.61451236 73.64983994

4650 WELD 5,333.0 4650 0.0 12.6 22.61474193 73.65063837

4440 WELD 5,077.0 4440 0.0 12.2 22.61768319 73.65290162

11000015 WT CHANGE 5,077.0 4440 0.0 0.0 22.61763107 73.65184648 23.80 70000 0.72

4460 WELD 5,101.5 4460 0.0 12.2 22.61770268 73.65420374

4450 WELD 5,089.3 4450 0.0 12.2 22.61762375 73.65318495

4410 WELD 5,048.3 4410 0.0 12.5 22.61753410 73.64967467

4430 WELD 5,073.6 4430 0.0 3.5 22.61763092 73.65184344

4420 WELD 5,060.9 4420 0.0 12.7 22.61759576 73.65079797

4520 WELD 5,174.5 4520 0.0 12.2 22.61832524 73.65996408

4510 WELD 5,162.4 4510 0.0 12.1 22.61820520 73.65906748

4540 WELD 5,199.2 4540 0.0 12.1 22.61812446 73.66004002

4530 WELD 5,186.7 4530 0.0 12.4 22.61851912 73.66093697

4480 WELD 5,126.0 4480 0.0 12.3 22.61790244 73.65622507

4470 WELD 5,113.7 4470 0.0 12.3 22.61780126 73.65522133

4500 WELD 5,150.5 4500 0.0 11.8 22.61809760 73.65814510

4490 WELD 5,138.3 4490 0.0 12.2 22.61798923 73.65718427


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


4770 WELD 5,472.3 4770 0.0 13.6 22.61231195 73.64569711

4760 WELD 5,460.2 4760 0.0 12.1 22.61251284 73.64571644

4790 WELD 5,498.0 4790 0.0 12.2 22.61191589 73.64606896

4780 WELD 5,485.9 4780 0.0 12.1 22.61211268 73.64572605

4730 WELD 5,423.8 4730 0.0 12.1 22.61311290 73.64613838

4720 WELD 5,412.2 4720 0.0 11.6 22.61331200 73.64639996

4750 WELD 5,448.0 4750 0.0 12.2 22.61271384 73.64578321

4740 WELD 5,435.9 4740 0.0 12.1 22.61291508 73.64593651

4850 WELD 5,569.5 4850 0.0 10.9 22.61128080 73.65021563

4840 WELD 5,557.3 4840 0.0 12.2 22.61137165 73.64953041

4870 WELD 5,590.5 4870 0.0 10.8 22.61109465 73.65143446

4860 WELD 5,580.4 4860 0.0 10.2 22.61119568 73.65089932

4810 WELD 5,522.0 4810 0.0 12.2 22.61167872 73.64750805

4800 WELD 5,510.2 4800 0.0 11.8 22.61179433 73.64679141

4830 WELD 5,545.2 4830 0.0 12.1 22.61146777 73.64890340

4820 WELD 5,534.2 4820 0.0 11.0 22.61157029 73.64819688

4710 WELD 5,400.5 4710 0.0 11.7 22.61350864 73.64686589

4700 WELD 5,388.8 4700 0.0 11.7 22.61370693 73.64728978

4930 WELD 5,657.0 4930 0.0 11.0 22.61036336 73.65189518

4920 WELD 5,646.4 4920 0.0 10.6 22.61053637 73.65263123

4950 WELD 5,680.1 4950 0.0 11.9 22.61009791 73.65062105

4940 WELD 5,667.9 4940 0.0 12.1 22.61025038 73.65131361

4890 WELD 5,611.1 4890 0.0 11.0 22.61089196 73.65241254

4880 WELD 5,601.4 4880 0.0 9.7 22.61098693 73.65189022

4910 WELD 5,634.6 4910 0.0 11.8 22.61070482 73.65338149

4900 WELD 5,622.1 4900 0.0 12.4 22.61079575 73.65286387

4970 WELD 5,702.1 4970 0.0 12.3 22.61006141 73.65012669

4960 WELD 5,692.0 4960 0.0 10.1 22.61005830 73.65022021

4980 WELD 5,714.4 4980 0.0 10.3 22.61005437 73.65009266

11000016 WT CHANGE 5,714.4 4980 0.0 0.0 22.61005921 73.65011606 17.50 70000 0.72


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


5090 WELD 5,846.0 5090 0.0 12.1 22.61006641 73.65647781

5080 WELD 5,834.1 5080 0.0 11.9 22.61009918 73.65579058

5110 WELD 5,870.0 5110 0.0 11.9 22.61001198 73.65780978

5100 WELD 5,858.0 5100 0.0 12.0 22.61003668 73.65714283

5050 WELD 5,797.8 5050 0.0 11.8 22.61020721 73.65364302

5040 WELD 5,786.3 5040 0.0 11.5 22.61024664 73.65289319

5070 WELD 5,822.0 5070 0.0 12.1 22.61013522 73.65507631

5060 WELD 5,809.6 5060 0.0 12.4 22.61017273 73.65436869

5170 WELD 5,942.1 5170 0.0 11.7 22.60984915 73.66143178

5160 WELD 5,930.7 5160 0.0 11.4 22.60987992 73.66087600

5190 WELD 5,965.7 5190 0.0 12.1 22.60976152 73.66241550

5180 WELD 5,953.8 5180 0.0 11.9 22.60980414 73.66191952

5130 WELD 5,894.8 5130 0.0 12.0 22.60996038 73.65907524

5120 WELD 5,882.0 5120 0.0 12.9 22.60999065 73.65846437

5150 WELD 5,918.7 5150 0.0 12.0 22.60991301 73.66031817

5140 WELD 5,906.8 5140 0.0 11.9 22.60993788 73.65972372

5030 WELD 5,774.5 5030 0.0 11.8 22.61023509 73.65204509

5000 WELD 5,737.6 5000 0.0 12.4 22.61008517 73.65032744

4990 WELD 5,724.7 4990 0.0 13.0 22.61007190 73.65011562

5020 WELD 5,762.8 5020 0.0 11.7 22.61018195 73.65122525

5010 WELD 5,750.0 5010 0.0 12.8 22.61013161 73.65067278

5200 WELD 5,977.8 5200 0.0 12.1 22.60972023 73.66290941

5260 WELD 6,051.3 5260 0.0 12.0 22.60892117 73.66428150

5250 WELD 6,039.1 5250 0.0 12.2 22.60914160 73.66431221

5280 WELD 6,075.2 5280 0.0 12.9 22.60841467 73.66352208

5270 WELD 6,063.3 5270 0.0 11.9 22.60867917 73.66417366

5220 WELD 6,001.8 5220 0.0 11.9 22.60961756 73.66383759

5210 WELD 5,989.9 5210 0.0 11.9 22.60966878 73.66337769

5240 WELD 6,026.9 5240 0.0 12.2 22.60936010 73.66430402

5230 WELD 6,013.7 5230 0.0 13.2 22.60955249 73.66425090


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


5430 WELD 6,257.5 5430 0.0 12.6 22.60815269 73.66686253

5420 WELD 6,244.5 5420 0.0 13.0 22.60847841 73.66724471

5450 WELD 6,282.7 5450 0.0 12.2 22.60744911 73.66584969

5440 WELD 6,270.1 5440 0.0 12.6 22.60779731 73.66636935

5390 WELD 6,207.7 5390 0.0 11.9 22.60894953 73.66706853

5380 WELD 6,197.2 5380 0.0 10.6 22.60879805 73.66630616

5410 WELD 6,232.3 5410 0.0 12.2 22.60879028 73.66754022

5400 WELD 6,219.6 5400 0.0 12.7 22.60906733 73.66773724

5510 WELD 6,354.9 5510 0.0 11.0 22.60562952 73.66164057

5500 WELD 6,344.4 5500 0.0 10.4 22.60587274 73.66229706

5530 WELD 6,378.1 5530 0.0 12.6 22.60517293 73.66038689

5520 WELD 6,365.9 5520 0.0 12.3 22.60540631 73.66103847

5470 WELD 6,307.6 5470 0.0 12.5 22.60676714 73.66449474

5460 WELD 6,294.8 5460 0.0 12.7 22.60710034 73.66516103

5490 WELD 6,333.0 5490 0.0 11.4 22.60614851 73.66304579

5480 WELD 6,320.1 5480 0.0 13.0 22.60643813 73.66377068

5370 WELD 6,185.3 5370 0.0 11.9 22.60864360 73.66554399

5340 WELD 6,148.4 5340 0.0 13.1 22.60813743 73.66334227

5330 WELD 6,136.6 5330 0.0 11.8 22.60798914 73.66272635

5360 WELD 6,173.5 5360 0.0 11.8 22.60847538 73.66479696

5350 WELD 6,161.5 5350 0.0 11.9 22.60828903 73.66400479

5300 WELD 6,099.0 5300 0.0 13.5 22.60791942 73.66219027

5290 WELD 6,088.1 5290 0.0 10.9 22.60816501 73.66287984

5320 WELD 6,124.3 5320 0.0 12.3 22.60786167 73.66219028

5310 WELD 6,112.5 5310 0.0 11.8 22.60771473 73.66162514

5580 WELD 6,440.1 5580 0.0 12.6 22.60430247 73.65714248

5550 WELD 6,402.9 5550 0.0 12.3 22.60475726 73.65899605

5540 WELD 6,390.7 5540 0.0 12.2 22.60494072 73.65966516

5570 WELD 6,427.3 5570 0.0 12.8 22.60444557 73.65775363

5560 WELD 6,415.2 5560 0.0 12.1 22.60459389 73.65836614


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


5880 WELD 6,812.6 5880 0.0 11.9 22.60144310 73.65364207

5870 WELD 6,799.3 5870 0.0 13.3 22.60138879 73.65282046

5760 WELD 6,661.9 5760 0.0 12.2 22.60309339 73.65719086

5750 WELD 6,649.6 5750 0.0 12.2 22.60304553 73.65631556

5780 WELD 6,686.2 5780 0.0 12.4 22.60254684 73.65585809

5770 WELD 6,674.0 5770 0.0 12.2 22.60281621 73.65653666

5720 WELD 6,613.1 5720 0.0 12.1 22.60289183 73.65370980

5710 WELD 6,600.8 5710 0.0 12.3 22.60284452 73.65287963

5740 WELD 6,637.5 5740 0.0 12.1 22.60299262 73.65542447

5730 WELD 6,625.2 5730 0.0 12.3 22.60294179 73.65456338

5840 WELD 6,761.1 5840 0.0 13.0 22.60124253 73.65081898

5830 WELD 6,749.3 5830 0.0 11.8 22.60140758 73.65167285

5860 WELD 6,786.8 5860 0.0 12.4 22.60133319 73.65206725

5850 WELD 6,774.1 5850 0.0 12.7 22.60127892 73.65138738

5800 WELD 6,711.7 5800 0.0 13.4 22.60204286 73.65431516

5790 WELD 6,698.6 5790 0.0 13.1 22.60228890 73.65511440

5820 WELD 6,737.1 5820 0.0 12.2 22.60159616 73.65250715

5810 WELD 6,725.0 5810 0.0 12.0 22.60181187 73.65342644

5700 WELD 6,588.5 5700 0.0 12.3 22.60279814 73.65211789

5590 WELD 6,452.7 5590 0.0 12.7 22.60416308 73.65649399

5610 WELD 6,477.9 5610 0.0 11.9 22.60401032 73.65557887

5600 WELD 6,465.4 5600 0.0 12.5 22.60407826 73.65601362

5670 WELD 6,550.8 5670 0.0 13.2 22.60273163 73.65096898

5660 WELD 6,538.4 5660 0.0 12.4 22.60289268 73.65180162

5690 WELD 6,576.2 5690 0.0 12.3 22.60275819 73.65138865

5680 WELD 6,564.0 5680 0.0 12.3 22.60271288 73.65066150

5630 WELD 6,501.6 5630 0.0 11.8 22.60350925 73.65414985

5620 WELD 6,489.8 5620 0.0 11.8 22.60374910 73.65487050

5650 WELD 6,525.9 5650 0.0 12.5 22.60307741 73.65263753

5640 WELD 6,513.4 5640 0.0 12.5 22.60328597 73.65340671


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


6090 WELD 7,071.6 6090 0.0 14.1 22.59973297 73.65344683

6080 WELD 7,058.4 6080 0.0 13.2 22.59969950 73.65306121

6110 WELD 7,097.9 6110 0.0 12.1 22.59971586 73.65542389

6100 WELD 7,085.7 6100 0.0 12.2 22.59970562 73.65438155

6050 WELD 7,023.6 6050 0.0 12.0 22.59962924 73.65258732

6040 WELD 7,011.3 6040 0.0 12.3 22.59967388 73.65306600

6070 WELD 7,048.0 6070 0.0 10.4 22.59964600 73.65262772

6060 WELD 7,035.6 6060 0.0 12.4 22.59960199 73.65225480

6170 WELD 7,170.6 6170 0.0 12.2 22.60004996 73.66098074

6160 WELD 7,158.5 6160 0.0 12.1 22.59998043 73.66009025

6180 WELD 7,182.8 6180 0.0 12.2 22.60013117 73.66188383

6130 WELD 7,121.8 6130 0.0 12.2 22.59980715 73.65730707

6120 WELD 7,109.9 6120 0.0 11.9 22.59976049 73.65637276

6150 WELD 7,146.6 6150 0.0 11.9 22.59991030 73.65914186

6140 WELD 7,134.0 6140 0.0 12.6 22.59985463 73.65821921

6030 WELD 6,998.0 6030 0.0 13.3 22.59974333 73.65356283

5920 WELD 6,861.2 5920 0.0 12.3 22.60170584 73.65722990

5910 WELD 6,848.8 5910 0.0 12.4 22.60163644 73.65630217

5940 WELD 6,887.3 5940 0.0 12.7 22.60172542 73.65887670

5930 WELD 6,873.5 5930 0.0 13.8 22.60172772 73.65809425

5900 WELD 6,836.5 5900 0.0 12.4 22.60157350 73.65542330

5890 WELD 6,824.5 5890 0.0 11.9 22.60151463 73.65456372

6000 WELD 6,960.5 6000 0.0 12.6 22.60026330 73.65608074

5990 WELD 6,948.4 5990 0.0 12.1 22.60046375 73.65686808

6020 WELD 6,986.4 6020 0.0 11.6 22.59990586 73.65443987

6010 WELD 6,973.1 6010 0.0 13.2 22.60007206 73.65526206

5960 WELD 6,911.3 5960 0.0 13.0 22.60131092 73.65887868

5950 WELD 6,899.9 5950 0.0 11.4 22.60157521 73.65919374

5980 WELD 6,936.8 5980 0.0 11.6 22.60074170 73.65762884

5970 WELD 6,924.3 5970 0.0 12.5 22.60103750 73.65832795


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


6190 WELD 7,195.1 6190 0.0 12.2 22.60022222 73.66278896

6410 WELD 7,458.1 6410 0.0 11.4 22.59997206 73.67099847

6400 WELD 7,444.5 6400 0.0 13.7 22.59996273 73.67105442

6430 WELD 7,480.9 6430 0.0 12.2 22.60009044 73.67122661

6420 WELD 7,469.6 6420 0.0 11.3 22.60002453 73.67106252

11000017 WT CHANGE 7,424.0 6380 0.0 0.0 22.60025451 73.67175847 15.90 70000 0.72

6370 WELD 7,411.4 6370 0.0 12.6 22.60025862 73.67176875

6390 WELD 7,430.8 6390 0.0 13.7 22.60002514 73.67112456

6380 WELD 7,424.0 6380 0.0 6.7 22.60008208 73.67132679

6450 WELD 7,504.5 6450 0.0 11.1 22.60033017 73.67185658

6440 WELD 7,493.1 6440 0.0 11.4 22.60018693 73.67148394

6470 WELD 7,527.7 6470 0.0 12.0 22.60070508 73.67293964

6460 WELD 7,515.6 6460 0.0 12.1 22.60048940 73.67229875

6360 WELD 7,400.1 6360 0.0 11.3 22.60051596 73.67239428

6250 WELD 7,268.3 6250 0.0 12.1 22.60091713 73.66803618

6240 WELD 7,255.7 6240 0.0 12.6 22.60076481 73.66710678

6270 WELD 7,291.8 6270 0.0 12.1 22.60120392 73.66974456

6260 WELD 7,280.4 6260 0.0 11.3 22.60106570 73.66891705

6210 WELD 7,219.1 6210 0.0 12.3 22.60042663 73.66457294

6200 WELD 7,207.2 6200 0.0 11.8 22.60032098 73.66368612

6230 WELD 7,242.5 6230 0.0 13.2 22.60065716 73.66631482

6220 WELD 7,231.4 6220 0.0 11.1 22.60053430 73.66543060

6330 WELD 7,363.2 6330 0.0 11.7 22.60136069 73.67300892

6320 WELD 7,351.6 6320 0.0 11.5 22.60152421 73.67288313

6350 WELD 7,387.3 6350 0.0 12.7 22.60088666 73.67285614

6340 WELD 7,374.8 6340 0.0 12.5 22.60118926 73.67311083

6290 WELD 7,315.7 6290 0.0 11.6 22.60147878 73.67132335

6280 WELD 7,303.8 6280 0.0 11.9 22.60133200 73.67051439

6310 WELD 7,339.9 6310 0.0 11.7 22.60166210 73.67267251

6300 WELD 7,327.3 6300 0.0 12.6 22.60164133 73.67213167


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


6490 WELD 7,550.0 6490 0.0 11.5 22.60041938 73.67325474

6480 WELD 7,539.7 6480 0.0 10.3 22.60071468 73.67347191

6510 WELD 7,572.8 6510 0.0 11.1 22.59984237 73.67278553

6500 WELD 7,561.5 6500 0.0 11.2 22.60014201 73.67303730

6520 WELD 7,583.9 6520 0.0 11.3 22.59953455 73.67249190

6750 WELD 7,849.2 6750 0.0 11.0 22.59259813 73.65737289

6740 WELD 7,837.3 6740 0.0 11.8 22.59281042 73.65818261

6770 WELD 7,871.7 6770 0.0 11.4 22.59219614 73.65574249

6760 WELD 7,860.2 6760 0.0 11.5 22.59238890 73.65652998

6710 WELD 7,801.1 6710 0.0 13.5 22.59352559 73.66073260

6700 WELD 7,789.5 6700 0.0 11.6 22.59377581 73.66151976

6730 WELD 7,825.9 6730 0.0 11.5 22.59303149 73.65897948

6720 WELD 7,814.6 6720 0.0 11.3 22.59328531 73.65992751

6690 WELD 7,778.1 6690 0.0 11.4 22.59403662 73.66230007

6580 WELD 7,652.0 6580 0.0 11.6 22.59755722 73.67006977

6570 WELD 7,640.7 6570 0.0 11.3 22.59789670 73.67054899

6600 WELD 7,675.1 6600 0.0 11.3 22.59685522 73.66891784

6590 WELD 7,663.6 6590 0.0 11.5 22.59720961 73.66952135

6540 WELD 7,606.6 6540 0.0 11.4 22.59889978 73.67181631

6530 WELD 7,595.2 6530 0.0 11.5 22.59921982 73.67216402

6560 WELD 7,629.4 6560 0.0 11.4 22.59823462 73.67100575

6550 WELD 7,618.1 6550 0.0 11.3 22.59857221 73.67143722

6660 WELD 7,744.4 6660 0.0 11.2 22.59486741 73.66460413

6650 WELD 7,733.0 6650 0.0 11.4 22.59517147 73.66538671

6680 WELD 7,766.8 6680 0.0 11.3 22.59430455 73.66306801

6670 WELD 7,755.6 6670 0.0 11.2 22.59457971 73.66383204

6620 WELD 7,697.7 6620 0.0 11.3 22.59616044 73.66760698

6610 WELD 7,686.4 6610 0.0 11.3 22.59650286 73.66826188

6640 WELD 7,721.4 6640 0.0 11.6 22.59549669 73.66621416

6630 WELD 7,709.0 6630 0.0 12.3 22.59582441 73.66692998


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


6830 WELD 7,941.2 6830 0.0 11.9 22.59116135 73.65070617

6820 WELD 7,929.1 6820 0.0 12.0 22.59131394 73.65153363

6850 WELD 7,964.3 6850 0.0 11.4 22.59086514 73.64892610

6840 WELD 7,953.0 6840 0.0 11.3 22.59101031 73.64981211

6790 WELD 7,894.9 6790 0.0 11.8 22.59181932 73.65408510

6780 WELD 7,883.1 6780 0.0 11.8 22.59200271 73.65490956

6810 WELD 7,918.0 6810 0.0 11.2 22.59147286 73.65236190

6800 WELD 7,906.7 6800 0.0 11.3 22.59164210 73.65322377

7070 WELD 8,221.8 7070 0.0 13.5 22.58852102 73.63248604

7040 WELD 8,181.9 7040 0.0 12.6 22.58880092 73.63438586

7030 WELD 8,170.6 7030 0.0 11.3 22.58888978 73.63500201

7060 WELD 8,208.1 7060 0.0 13.7 22.58863821 73.63305841

7050 WELD 8,194.5 7050 0.0 13.7 22.58871724 73.63375383

7020 WELD 8,159.5 7020 0.0 11.1 22.58897786 73.63563492

6910 WELD 8,033.3 6910 0.0 11.7 22.59010760 73.64379323

6900 WELD 8,022.1 6900 0.0 11.2 22.59022382 73.64462475

6930 WELD 8,056.6 6930 0.0 11.4 22.58988794 73.64215060

6920 WELD 8,045.0 6920 0.0 11.6 22.58999845 73.64298120

6870 WELD 7,987.6 6870 0.0 11.3 22.59059510 73.64723224

6860 WELD 7,975.7 6860 0.0 11.9 22.59072746 73.64808210

6890 WELD 8,010.7 6890 0.0 11.4 22.59034453 73.64549691

6880 WELD 7,998.9 6880 0.0 11.8 22.59046599 73.64634137

6990 WELD 8,126.0 6990 0.0 10.7 22.58924294 73.63771815

6980 WELD 8,114.3 6980 0.0 11.7 22.58933602 73.63843832

7010 WELD 8,148.5 7010 0.0 11.0 22.58906274 73.63634180

7000 WELD 8,136.7 7000 0.0 11.7 22.58915213 73.63699421

6960 WELD 8,090.8 6960 0.0 12.1 22.58954309 73.63991799

6940 WELD 8,068.0 6940 0.0 11.5 22.58976767 73.64139169

6950 WELD 8,079.5 6950 0.0 11.3 22.58965328 73.64065393

6970 WELD 8,103.0 6970 0.0 11.4 22.58943811 73.63919839


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


7370 WELD 8,583.3 7370 0.0 11.7 22.58553379 73.61947507

7360 WELD 8,571.9 7360 0.0 11.4 22.58559637 73.61991198

7350 WELD 8,560.4 7350 0.0 11.4 22.58566350 73.62036131

7240 WELD 8,422.5 7240 0.0 11.3 22.58668335 73.62498514

7230 WELD 8,411.2 7230 0.0 11.3 22.58678270 73.62537152

7260 WELD 8,446.4 7260 0.0 12.4 22.58648231 73.62422240

7250 WELD 8,433.8 7250 0.0 12.5 22.58658716 73.62458728

7200 WELD 8,377.4 7200 0.0 11.4 22.58709324 73.62654900

7190 WELD 8,365.9 7190 0.0 11.5 22.58719907 73.62693772

7220 WELD 8,400.1 7220 0.0 11.1 22.58688322 73.62576682

7210 WELD 8,388.8 7210 0.0 11.3 22.58698687 73.62615755

7320 WELD 8,523.1 7320 0.0 11.4 22.58589827 73.62173638

7310 WELD 8,509.4 7310 0.0 13.8 22.58598785 73.62219980

7340 WELD 8,548.3 7340 0.0 12.1 22.58573590 73.62085572

7330 WELD 8,534.5 7330 0.0 13.8 22.58581536 73.62126117

7280 WELD 8,470.2 7280 0.0 11.3 22.58626916 73.62343903

7270 WELD 8,458.8 7270 0.0 11.4 22.58637766 73.62381909

7300 WELD 8,495.6 7300 0.0 13.8 22.58607561 73.62268305

7290 WELD 8,481.5 7290 0.0 14.0 22.58616876 73.62306870

7080 WELD 8,235.3 7080 0.0 11.5 22.58840735 73.63191355

7100 WELD 8,258.2 7100 0.0 14.0 22.58818833 73.63088597

7090 WELD 8,246.8 7090 0.0 11.5 22.58829817 73.63134497

7160 WELD 8,332.2 7160 0.0 11.2 22.58752282 73.62811148

7150 WELD 8,321.1 7150 0.0 11.1 22.58763432 73.62852388

7180 WELD 8,354.7 7180 0.0 11.2 22.58730636 73.62732889

7170 WELD 8,343.4 7170 0.0 11.3 22.58741480 73.62771979

7120 WELD 8,285.0 7120 0.0 13.2 22.58796677 73.62989332

7110 WELD 8,272.3 7110 0.0 12.7 22.58807802 73.63043845

7140 WELD 8,309.4 7140 0.0 11.8 22.58774366 73.62892877

7130 WELD 8,298.2 7130 0.0 11.2 22.58785561 73.62941382


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


7410 WELD 8,627.8 7410 0.0 11.4 22.58535493 73.61760614

7400 WELD 8,617.6 7400 0.0 10.2 22.58539132 73.61808101

7430 WELD 8,651.0 7430 0.0 11.3 22.58532408 73.61661293

7420 WELD 8,639.2 7420 0.0 11.7 22.58533650 73.61713187

7390 WELD 8,606.3 7390 0.0 11.3 22.58543283 73.61855074

7380 WELD 8,595.0 7380 0.0 11.4 22.58547462 73.61903533

7490 WELD 8,719.7 7490 0.0 12.0 22.58533028 73.61344752

7480 WELD 8,708.5 7480 0.0 11.3 22.58531805 73.61397578

7510 WELD 8,742.9 7510 0.0 11.2 22.58536633 73.61236939

7500 WELD 8,731.8 7500 0.0 11.1 22.58534284 73.61292587

7450 WELD 8,673.4 7450 0.0 11.7 22.58530637 73.61557268

7440 WELD 8,662.3 7440 0.0 11.1 22.58531733 73.61607992

7470 WELD 8,697.1 7470 0.0 11.3 22.58530569 73.61452946

7460 WELD 8,685.1 7460 0.0 12.0 22.58529821 73.61507164

7570 WELD 8,812.2 7570 0.0 11.1 22.58558451 73.60910618

7560 WELD 8,800.9 7560 0.0 11.2 22.58553417 73.60965081

7590 WELD 8,834.8 7590 0.0 11.3 22.58569902 73.60801458

7580 WELD 8,823.3 7580 0.0 11.5 22.58564066 73.60855822

7530 WELD 8,766.3 7530 0.0 11.8 22.58540645 73.61133340

7520 WELD 8,754.1 7520 0.0 12.3 22.58538433 73.61185310

7550 WELD 8,789.7 7550 0.0 11.2 22.58548029 73.61021436

7540 WELD 8,778.2 7540 0.0 11.6 22.58544625 73.61076078

7650 WELD 8,905.3 7650 0.0 11.4 22.58616202 73.60460207

7640 WELD 8,894.1 7640 0.0 11.1 22.58608772 73.60513888

7670 WELD 8,928.5 7670 0.0 12.0 22.58631647 73.60353094

7660 WELD 8,916.7 7660 0.0 11.8 22.58623764 73.60406978

7610 WELD 8,857.3 7610 0.0 13.9 22.58583262 73.60690696

7600 WELD 8,846.1 7600 0.0 11.3 22.58576896 73.60745180

7630 WELD 8,882.9 7630 0.0 11.2 22.58600804 73.60570077

7620 WELD 8,871.2 7620 0.0 11.7 22.58589661 73.60636721


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


7900 WELD 9,205.5 7900 0.0 11.8 22.59146877 73.58952684

7890 WELD 9,194.1 7890 0.0 11.4 22.59119538 73.59007509

7920 WELD 9,229.1 7920 0.0 11.3 22.59204363 73.58841016

7910 WELD 9,217.3 7910 0.0 11.8 22.59174795 73.58897467

7860 WELD 9,159.4 7860 0.0 12.2 22.59038313 73.59177264

7850 WELD 9,148.1 7850 0.0 11.2 22.59013015 73.59233815

7880 WELD 9,182.8 7880 0.0 11.3 22.59092974 73.59062179

7870 WELD 9,171.6 7870 0.0 11.2 22.59063943 73.59121672

7970 WELD 9,287.5 7970 0.0 12.0 22.59358913 73.58565609

7940 WELD 9,251.6 7940 0.0 13.7 22.59263443 73.58730880

7930 WELD 9,240.5 7930 0.0 11.2 22.59234462 73.58784722

7960 WELD 9,276.5 7960 0.0 11.0 22.59329387 73.58616641

7950 WELD 9,265.3 7950 0.0 11.2 22.59292211 73.58678013

7740 WELD 9,010.2 7740 0.0 12.3 22.58733911 73.59931289

7730 WELD 8,999.8 7730 0.0 10.3 22.58712218 73.59998716

7760 WELD 9,033.7 7760 0.0 10.6 22.58773344 73.59813303

7750 WELD 9,022.5 7750 0.0 11.3 22.58750605 73.59876828

7700 WELD 8,963.6 7700 0.0 11.3 22.58669332 73.60174729

7690 WELD 8,952.3 7690 0.0 11.3 22.58655569 73.60234736

7720 WELD 8,986.8 7720 0.0 13.0 22.58696436 73.60059354

7710 WELD 8,974.9 7710 0.0 11.9 22.58682739 73.60116918

7820 WELD 9,111.3 7820 0.0 13.8 22.58925253 73.59430949

7810 WELD 9,097.6 7810 0.0 13.8 22.58894942 73.59500828

7840 WELD 9,136.9 7840 0.0 11.3 22.58987119 73.59292843

7830 WELD 9,125.2 7830 0.0 11.7 22.58955842 73.59361939

7780 WELD 9,055.9 7780 0.0 14.1 22.58813232 73.59699964

7770 WELD 9,044.3 7770 0.0 11.6 22.58793765 73.59754841

7800 WELD 9,083.7 7800 0.0 13.9 22.58865775 73.59570011

7790 WELD 9,070.0 7790 0.0 13.7 22.58835959 73.59640641

7680 WELD 8,940.5 7680 0.0 11.8 22.58642103 73.60295545


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


8070 WELD 9,402.7 8070 0.0 11.4 22.59672080 73.58077350

8060 WELD 9,391.2 8060 0.0 11.5 22.59646115 73.58111579

8090 WELD 9,425.3 8090 0.0 11.2 22.59716626 73.58021099

8080 WELD 9,414.1 8080 0.0 11.2 22.59695848 73.58046941

8030 WELD 9,356.8 8030 0.0 11.6 22.59551206 73.58251573

8020 WELD 9,345.6 8020 0.0 11.2 22.59519355 73.58301676

8050 WELD 9,379.7 8050 0.0 11.5 22.59616335 73.58153411

8040 WELD 9,368.4 8040 0.0 11.3 22.59583357 73.58201826

8150 WELD 9,492.6 8150 0.0 11.4 22.59784037 73.57943003

8140 WELD 9,481.5 8140 0.0 11.0 22.59783565 73.57943021

8170 WELD 9,515.0 8170 0.0 11.3 22.59778759 73.57950970

8160 WELD 9,504.0 8160 0.0 11.1 22.59782510 73.57945488

8110 WELD 9,448.0 8110 0.0 11.1 22.59752101 73.57977937

8100 WELD 9,436.6 8100 0.0 11.5 22.59734967 73.57998625

8130 WELD 9,470.6 8130 0.0 10.9 22.59776204 73.57950445

8120 WELD 9,459.1 8120 0.0 11.5 22.59766725 73.57961140

8010 WELD 9,334.4 8010 0.0 11.2 22.59488120 73.58351939

7980 WELD 9,299.5 7980 0.0 11.4 22.59388057 73.58515282

8000 WELD 9,323.3 8000 0.0 11.1 22.59452798 73.58407947

7990 WELD 9,310.9 7990 0.0 12.4 22.59421377 73.58460142

8230 WELD 9,585.3 8230 0.0 11.5 22.59709145 73.58038909

8220 WELD 9,573.6 8220 0.0 11.7 22.59727077 73.58015919

8250 WELD 9,608.0 8250 0.0 11.0 22.59616987 73.58135403

8240 WELD 9,596.8 8240 0.0 11.1 22.59662719 73.58087234

8190 WELD 9,537.6 8190 0.0 11.3 22.59765178 73.57968352

8180 WELD 9,526.4 8180 0.0 11.3 22.59773129 73.57958188

8210 WELD 9,561.1 8210 0.0 12.5 22.59742336 73.57996301

8200 WELD 9,548.9 8200 0.0 12.2 22.59755110 73.57980821

8270 WELD 9,630.2 8270 0.0 11.3 22.59527338 73.58230280

8260 WELD 9,619.0 8260 0.0 11.2 22.59572002 73.58182775


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


8560 WELD 9,953.9 8560 0.0 11.1 22.58194503 73.59808758

8550 WELD 9,942.6 8550 0.0 11.3 22.58236561 73.59757068

8570 WELD 9,965.0 8570 0.0 11.8 22.58153485 73.59858895

8520 WELD 9,909.8 8520 0.0 10.3 22.58360179 73.59607904

8510 WELD 9,899.0 8510 0.0 10.8 22.58404219 73.59554028

8540 WELD 9,931.2 8540 0.0 11.4 22.58278129 73.59706537

8530 WELD 9,920.1 8530 0.0 11.0 22.58318036 73.59659012

8400 WELD 9,775.1 8400 0.0 11.3 22.58922450 73.58930010

8390 WELD 9,764.0 8390 0.0 11.2 22.58971958 73.58869033

8420 WELD 9,798.0 8420 0.0 11.7 22.58826009 73.59049280

8410 WELD 9,786.4 8410 0.0 11.6 22.58874315 73.58989118

8360 WELD 9,730.0 8360 0.0 11.2 22.59112411 73.58698422

8350 WELD 9,718.9 8350 0.0 11.2 22.59158502 73.58644028

8380 WELD 9,752.4 8380 0.0 11.6 22.59018479 73.58811890

8370 WELD 9,741.3 8370 0.0 11.1 22.59065552 73.58754613

8480 WELD 9,865.5 8480 0.0 11.0 22.58538263 73.59392564

8470 WELD 9,854.4 8470 0.0 11.0 22.58584183 73.59337516

8500 WELD 9,887.7 8500 0.0 11.2 22.58448803 73.59499921

8490 WELD 9,876.5 8490 0.0 11.3 22.58493259 73.59446483

8440 WELD 9,820.9 8440 0.0 11.0 22.58725795 73.59169768

8430 WELD 9,809.7 8430 0.0 11.2 22.58775897 73.59110523

8460 WELD 9,843.3 8460 0.0 11.1 22.58631778 73.59280598

8450 WELD 9,831.8 8450 0.0 11.5 22.58678168 73.59225971

8340 WELD 9,707.9 8340 0.0 11.0 22.59206057 73.58588202

8310 WELD 9,674.5 8310 0.0 11.0 22.59343792 73.58431423

8300 WELD 9,663.5 8300 0.0 11.0 22.59389599 73.58380676

8330 WELD 9,696.5 8330 0.0 11.4 22.59252228 73.58534955

8320 WELD 9,685.5 8320 0.0 11.0 22.59298119 73.58482793

8290 WELD 9,652.6 8290 0.0 11.0 22.59435418 73.58330187

8280 WELD 9,641.5 8280 0.0 11.1 22.59481566 73.58279735


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


8730 WELD 10,148.5 8730 0.0 11.0 22.57886635 73.59750936

8720 WELD 10,137.3 8720 0.0 11.2 22.57879207 73.59803625

8750 WELD 10,170.6 8750 0.0 10.9 22.57905015 73.59640072

8740 WELD 10,159.5 8740 0.0 11.2 22.57895839 73.59695060

8690 WELD 10,104.2 8690 0.0 11.3 22.57855992 73.59969174

8680 WELD 10,093.1 8680 0.0 11.1 22.57845802 73.60035371

8710 WELD 10,126.6 8710 0.0 10.7 22.57870957 73.59859032

8700 WELD 10,115.5 8700 0.0 11.1 22.57863117 73.59914692

8810 WELD 10,239.4 8810 0.0 12.2 22.57972251 73.59295510

8800 WELD 10,229.0 8800 0.0 10.3 22.57955900 73.59363473

8830 WELD 10,263.1 8830 0.0 11.4 22.57998286 73.59181591

8820 WELD 10,251.5 8820 0.0 11.6 22.57982844 73.59243408

8770 WELD 10,192.6 8770 0.0 11.4 22.57924276 73.59530050

8760 WELD 10,181.5 8760 0.0 11.1 22.57914699 73.59584459

8790 WELD 10,215.2 8790 0.0 13.8 22.57944688 73.59419420

8780 WELD 10,204.0 8780 0.0 11.2 22.57933687 73.59475976

8670 WELD 10,079.4 8670 0.0 13.7 22.57867042 73.60035517

8580 WELD 9,976.8 8580 0.0 11.4 22.58113974 73.59905822

8640 WELD 10,045.3 8640 0.0 11.6 22.57934828 73.60027330

8630 WELD 10,033.9 8630 0.0 11.4 22.57959735 73.60018848

8660 WELD 10,068.1 8660 0.0 11.3 22.57888342 73.60035358

8650 WELD 10,056.9 8650 0.0 11.2 22.57911175 73.60032565

8600 WELD 9,999.4 8600 0.0 11.1 22.58043993 73.59972495

8590 WELD 9,988.1 8590 0.0 11.2 22.58073938 73.59952493

8620 WELD 10,022.6 8620 0.0 11.3 22.57987972 73.60004558

8610 WELD 10,010.4 8610 0.0 12.2 22.58015340 73.59989828

8850 WELD 10,285.8 8850 0.0 11.1 22.58030329 73.59061493

8840 WELD 10,274.5 8840 0.0 11.3 22.58014213 73.59121123

8870 WELD 10,308.4 8870 0.0 11.1 22.58066446 73.58940656

8860 WELD 10,296.8 8860 0.0 11.5 22.58047753 73.59001089


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


9060 WELD 10,534.9 9060 0.0 13.3 22.58620321 73.57699573

9050 WELD 10,523.4 9050 0.0 11.5 22.58580761 73.57768870

9080 WELD 10,559.6 9080 0.0 11.1 22.58696252 73.57569396

9070 WELD 10,548.2 9070 0.0 11.4 22.58654612 73.57638817

9020 WELD 10,486.6 9020 0.0 12.2 22.58482028 73.57957393

9010 WELD 10,475.3 9010 0.0 11.3 22.58451475 73.58019099

9040 WELD 10,510.3 9040 0.0 13.1 22.58547849 73.57830385

9030 WELD 10,498.8 9030 0.0 11.4 22.58513054 73.57895844

9140 WELD 10,626.3 9140 0.0 11.8 22.58910264 73.57224315

9130 WELD 10,615.3 9130 0.0 11.0 22.58874427 73.57279888

9160 WELD 10,649.3 9160 0.0 11.3 22.58986585 73.57110075

9150 WELD 10,638.1 9150 0.0 11.2 22.58946703 73.57168770

9100 WELD 10,582.0 9100 0.0 11.1 22.58766320 73.57452278

9090 WELD 10,570.7 9090 0.0 11.3 22.58731415 73.57509811

9120 WELD 10,604.4 9120 0.0 10.9 22.58837783 73.57337217

9110 WELD 10,593.1 9110 0.0 11.3 22.58802270 73.57394049

9000 WELD 10,464.0 9000 0.0 11.3 22.58421169 73.58081888

8890 WELD 10,331.1 8890 0.0 13.5 22.58109411 73.58815018

8880 WELD 10,319.5 8880 0.0 11.6 22.58088094 73.58876843

8910 WELD 10,358.0 8910 0.0 13.5 22.58163258 73.58675988

8900 WELD 10,344.5 8900 0.0 13.5 22.58133441 73.58750180

8970 WELD 10,426.6 8970 0.0 12.1 22.58326623 73.58284094

8960 WELD 10,415.3 8960 0.0 11.3 22.58300031 73.58345809

8990 WELD 10,452.5 8990 0.0 11.5 22.58384238 73.58156297

8980 WELD 10,438.7 8980 0.0 13.8 22.58354005 73.58222100

8930 WELD 10,381.9 8930 0.0 11.3 22.58225668 73.58527609

8920 WELD 10,371.5 8920 0.0 10.4 22.58194079 73.58601819

8950 WELD 10,404.2 8950 0.0 11.2 22.58274466 73.58406875

8940 WELD 10,393.1 8940 0.0 11.0 22.58248569 73.58469373

9170 WELD 10,660.6 9170 0.0 11.7 22.59024760 73.57054146


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


9400 WELD 10,926.0 9400 0.0 11.1 22.59569615 73.56405802

9390 WELD 10,914.8 9390 0.0 11.1 22.59564770 73.56409472

9420 WELD 10,948.7 9420 0.0 11.2 22.59576953 73.56400071

9410 WELD 10,937.0 9410 0.0 11.6 22.59573576 73.56402691

9360 WELD 10,878.9 9360 0.0 11.4 22.59541063 73.56428115

9350 WELD 10,868.0 9350 0.0 10.9 22.59532552 73.56435965

9380 WELD 10,903.4 9380 0.0 11.4 22.59556974 73.56413831

9370 WELD 10,890.3 9370 0.0 13.1 22.59549227 73.56420444

9470 WELD 11,005.6 9470 0.0 11.5 22.59549018 73.56431895

9440 WELD 10,971.2 9440 0.0 11.5 22.59578882 73.56400465

9430 WELD 10,959.9 9430 0.0 11.4 22.59578923 73.56399558

9460 WELD 10,994.2 9460 0.0 11.5 22.59571024 73.56410327

9450 WELD 10,982.7 9450 0.0 11.4 22.59577618 73.56402771

9340 WELD 10,856.9 9340 0.0 11.1 22.59523348 73.56444295

9230 WELD 10,729.1 9230 0.0 12.0 22.59263741 73.56727972

9220 WELD 10,717.3 9220 0.0 11.8 22.59224084 73.56779589

9250 WELD 10,753.1 9250 0.0 11.4 22.59348339 73.56624484

9240 WELD 10,741.1 9240 0.0 12.0 22.59305631 73.56675963

9190 WELD 10,683.6 9190 0.0 11.2 22.59104588 73.56941374

9180 WELD 10,672.3 9180 0.0 11.3 22.59063790 73.56998254

9210 WELD 10,706.2 9210 0.0 11.1 22.59183665 73.56832983

9200 WELD 10,694.8 9200 0.0 11.4 22.59144213 73.56886532

9310 WELD 10,823.2 9310 0.0 11.4 22.59483040 73.56479556

9300 WELD 10,809.4 9300 0.0 13.8 22.59467953 73.56493198

9330 WELD 10,845.6 9330 0.0 11.3 22.59513118 73.56454074

9320 WELD 10,834.6 9320 0.0 11.0 22.59501009 73.56465332

9270 WELD 10,775.6 9270 0.0 10.7 22.59424043 73.56537974

9260 WELD 10,764.5 9260 0.0 11.0 22.59388574 73.56578114

9290 WELD 10,797.3 9290 0.0 12.1 22.59454200 73.56506918

9280 WELD 10,786.3 9280 0.0 11.0 22.59440257 73.56521401


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


9480 WELD 11,017.1 9480 0.0 11.9 22.59524346 73.56456004

9500 WELD 11,040.5 9500 0.0 11.4 22.59461630 73.56517082

9490 WELD 11,029.0 9490 0.0 11.5 22.59495523 73.56484002

9730 WELD 11,301.3 9730 0.0 14.2 22.58116828 73.57754191

9720 WELD 11,290.3 9720 0.0 10.9 22.58168893 73.57705870

9750 WELD 11,326.7 9750 0.0 11.4 22.58005305 73.57858644

9740 WELD 11,315.5 9740 0.0 11.2 22.58066075 73.57800979

9690 WELD 11,256.9 9690 0.0 11.2 22.58333599 73.57552668

9680 WELD 11,245.5 9680 0.0 11.5 22.58389833 73.57500879

9710 WELD 11,279.4 9710 0.0 11.0 22.58222293 73.57656495

9700 WELD 11,268.2 9700 0.0 11.2 22.58277085 73.57605411

9770 WELD 11,351.6 9770 0.0 11.4 22.57909211 73.57943189

9760 WELD 11,338.1 9760 0.0 13.5 22.57956489 73.57902285

9670 WELD 11,234.2 9670 0.0 11.2 22.58447411 73.57447570

9560 WELD 11,108.4 9560 0.0 11.4 22.59130187 73.56815895

9550 WELD 11,097.0 9550 0.0 11.4 22.59191507 73.56759990

9580 WELD 11,130.8 9580 0.0 11.2 22.59005268 73.56930104

9570 WELD 11,119.8 9570 0.0 11.0 22.59068564 73.56872494

9520 WELD 11,063.0 9520 0.0 11.0 22.59368263 73.56602279

9510 WELD 11,051.9 9510 0.0 11.1 22.59426711 73.56550810

9540 WELD 11,085.5 9540 0.0 11.4 22.59252879 73.56704438

9530 WELD 11,074.0 9530 0.0 11.6 22.59310439 73.56653248

9640 WELD 11,197.6 9640 0.0 14.0 22.58638653 73.57266797

9630 WELD 11,186.3 9630 0.0 11.3 22.58696378 73.57213938

9660 WELD 11,222.9 9660 0.0 11.3 22.58505781 73.57393271

9650 WELD 11,211.7 9650 0.0 11.2 22.58578090 73.57322971

9600 WELD 11,153.3 9600 0.0 11.0 22.58881619 73.57042707

9590 WELD 11,142.1 9590 0.0 11.2 22.58943943 73.56985792

9620 WELD 11,175.7 9620 0.0 10.6 22.58758521 73.57156049

9610 WELD 11,164.4 9610 0.0 11.4 22.58819427 73.57099765


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


10060 WELD 11,696.5 10060 0.0 10.9 22.57659483 73.57314674

10050 WELD 11,685.3 10050 0.0 11.2 22.57643375 73.57366210

10070 WELD 11,707.4 10070 0.0 11.2 22.57676795 73.57261819

10020 WELD 11,650.0 10020 0.0 13.8 22.57587235 73.57541558

10010 WELD 11,636.2 10010 0.0 13.9 22.57568171 73.57603157

10040 WELD 11,674.3 10040 0.0 11.0 22.57628978 73.57415330

10030 WELD 11,663.9 10030 0.0 10.5 22.57607583 73.57478692

10000 WELD 11,622.5 10000 0.0 13.7 22.57553632 73.57655617

9890 WELD 11,491.2 9890 0.0 11.4 22.57625495 73.57945235

9880 WELD 11,480.3 9880 0.0 10.9 22.57637387 73.57962427

9910 WELD 11,514.3 9910 0.0 13.9 22.57602630 73.57908405

9900 WELD 11,502.6 9900 0.0 11.7 22.57613623 73.57927893

9850 WELD 11,449.2 9850 0.0 11.3 22.57679044 73.58002918

9840 WELD 11,438.0 9840 0.0 11.1 22.57696987 73.58011658

9870 WELD 11,469.4 9870 0.0 10.8 22.57649186 73.57976544

9860 WELD 11,460.5 9860 0.0 8.9 22.57663690 73.57990536

9970 WELD 11,588.7 9970 0.0 11.5 22.57544029 73.57770089

9960 WELD 11,577.8 9960 0.0 10.9 22.57552703 73.57792133

9990 WELD 11,611.1 9990 0.0 11.3 22.57541063 73.57705451

9980 WELD 11,600.1 9980 0.0 11.0 22.57537854 73.57744637

9930 WELD 11,539.2 9930 0.0 13.9 22.57581921 73.57862997

9920 WELD 11,528.2 9920 0.0 11.0 22.57592180 73.57887602

9950 WELD 11,566.8 9950 0.0 11.0 22.57562651 73.57816756

9940 WELD 11,553.1 9940 0.0 13.7 22.57572562 73.57841898

9810 WELD 11,398.9 9810 0.0 13.9 22.57765939 73.58025786

9800 WELD 11,385.4 9800 0.0 13.4 22.57788191 73.58027310

9830 WELD 11,426.6 9830 0.0 11.4 22.57718208 73.58019486

9820 WELD 11,412.7 9820 0.0 13.9 22.57741627 73.58023715

9790 WELD 11,374.3 9790 0.0 11.2 22.57812616 73.58025491

9780 WELD 11,363.0 9780 0.0 11.3 22.57856342 73.57990226


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


10080 WELD 11,718.6 10080 0.0 11.2 22.57693595 73.57210329

10140 WELD 11,786.8 10140 0.0 11.1 22.57827842 73.56872758

10130 WELD 11,775.1 10130 0.0 11.7 22.57803465 73.56929103

10160 WELD 11,810.1 10160 0.0 11.5 22.57891510 73.56748550

10150 WELD 11,797.9 10150 0.0 12.1 22.57859851 73.56809494

10100 WELD 11,741.6 10100 0.0 11.3 22.57731446 73.57102984

10090 WELD 11,729.7 10090 0.0 11.9 22.57712114 73.57156835

10120 WELD 11,764.1 10120 0.0 10.9 22.57778691 73.56986693

10110 WELD 11,753.0 10110 0.0 11.2 22.57754812 73.57044290

10350 WELD 12,020.3 10350 0.0 11.0 22.58569050 73.55635168

10340 WELD 12,009.0 10340 0.0 11.3 22.58548849 73.55669562

10370 WELD 12,042.3 10370 0.0 13.1 22.58653249 73.55524163

10360 WELD 12,031.2 10360 0.0 11.1 22.58611643 73.55578666

10330 WELD 12,002.8 10330 0.0 6.2 22.58507305 73.55726274

10220 WELD 11,879.2 10220 0.0 11.2 22.58101679 73.56371021

10210 WELD 11,868.2 10210 0.0 10.9 22.58068363 73.56430573

10240 WELD 11,902.3 10240 0.0 11.4 22.58168830 73.56253600

10230 WELD 11,890.3 10230 0.0 12.0 22.58134681 73.56312745

10180 WELD 11,832.8 10180 0.0 12.3 22.57960993 73.56620593

10170 WELD 11,821.6 10170 0.0 11.2 22.57926868 73.56683051

10200 WELD 11,857.0 10200 0.0 11.2 22.58032799 73.56493740

10190 WELD 11,845.1 10190 0.0 11.9 22.57994398 73.56559791

10300 WELD 11,968.8 10300 0.0 11.3 22.58387383 73.55901070

10290 WELD 11,957.5 10290 0.0 11.3 22.58351660 73.55956776

10320 WELD 11,991.6 10320 0.0 11.2 22.58464566 73.55784594

10310 WELD 11,980.1 10310 0.0 11.6 22.58425706 73.55842734

10260 WELD 11,924.3 10260 0.0 11.2 22.58242806 73.56131075

10250 WELD 11,913.7 10250 0.0 10.6 22.58206602 73.56190890

10280 WELD 11,946.9 10280 0.0 10.6 22.58313453 73.56016334

10270 WELD 11,935.5 10270 0.0 11.4 22.58276374 73.56075197


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


10570 WELD 12,271.5 10570 0.0 10.8 22.59465394 73.54642581

10560 WELD 12,260.2 10560 0.0 11.2 22.59430714 73.54670151

10590 WELD 12,293.9 10590 0.0 11.1 22.59520257 73.54595925

10580 WELD 12,282.3 10580 0.0 11.6 22.59494000 73.54618356

10520 WELD 12,212.8 10520 0.0 11.0 22.59313840 73.54771820

10510 WELD 12,201.8 10510 0.0 10.9 22.59284341 73.54798281

10540 WELD 12,236.1 10540 0.0 11.0 22.59370913 73.54720853

10530 WELD 12,223.8 10530 0.0 12.4 22.59342189 73.54746366

10650 WELD 12,362.5 10650 0.0 11.2 22.59625345 73.54515040

10640 WELD 12,351.2 10640 0.0 11.3 22.59617153 73.54519235

10670 WELD 12,386.0 10670 0.0 11.1 22.59637713 73.54506899

10660 WELD 12,373.7 10660 0.0 12.4 22.59631855 73.54510788

10610 WELD 12,316.2 10610 0.0 11.0 22.59570404 73.54555290

10600 WELD 12,305.0 10600 0.0 11.2 22.59546954 73.54574416

10630 WELD 12,338.7 10630 0.0 12.5 22.59608766 73.54524811

10620 WELD 12,327.2 10620 0.0 11.5 22.59593658 73.54536602

10500 WELD 12,190.6 10500 0.0 11.2 22.59252130 73.54827198

10550 WELD 12,247.1 10550 0.0 13.1 22.59402675 73.54694586

10390 WELD 12,066.9 10390 0.0 11.1 22.58747485 73.55406033

10380 WELD 12,055.4 10380 0.0 11.5 22.58695763 73.55469239

10410 WELD 12,089.5 10410 0.0 11.2 22.58836768 73.55296444

10400 WELD 12,078.0 10400 0.0 11.4 22.58792746 73.55350214

10470 WELD 12,156.8 10470 0.0 11.1 22.59110538 73.54980806

10460 WELD 12,145.4 10460 0.0 11.4 22.59065440 73.55031442

10490 WELD 12,179.1 10490 0.0 11.6 22.59204890 73.54877933

10480 WELD 12,167.9 10480 0.0 11.1 22.59158161 73.54928687

10430 WELD 12,111.9 10430 0.0 10.8 22.58927647 73.55188777

10420 WELD 12,100.7 10420 0.0 11.2 22.58882536 73.55241937

10450 WELD 12,134.5 10450 0.0 10.9 22.59016774 73.55085631

10440 WELD 12,122.7 10440 0.0 11.8 22.58972961 73.55136312


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


10740 WELD 12,466.6 10740 0.0 11.9 22.59660929 73.54498144

10730 WELD 12,455.5 10730 0.0 11.1 22.59660327 73.54495485

10760 WELD 12,490.0 10760 0.0 11.2 22.59659633 73.54501410

10750 WELD 12,478.5 10750 0.0 11.5 22.59660739 73.54498989

10700 WELD 12,419.4 10700 0.0 11.1 22.59652247 73.54498735

10690 WELD 12,408.1 10690 0.0 11.3 22.59648120 73.54501535

10720 WELD 12,442.3 10720 0.0 13.2 22.59658325 73.54495554

10710 WELD 12,430.5 10710 0.0 11.8 22.59655723 73.54496929

10820 WELD 12,559.3 10820 0.0 12.5 22.59635474 73.54526157

10810 WELD 12,546.9 10810 0.0 12.4 22.59645209 73.54517420

10840 WELD 12,583.3 10840 0.0 11.2 22.59598922 73.54558507

10830 WELD 12,571.8 10830 0.0 11.5 22.59618901 73.54541017

10780 WELD 12,512.5 10780 0.0 11.3 22.59655092 73.54506806

10770 WELD 12,501.1 10770 0.0 11.3 22.59657437 73.54504226

10800 WELD 12,535.3 10800 0.0 11.6 22.59649533 73.54512964

10790 WELD 12,523.8 10790 0.0 11.5 22.59651750 73.54510332

10680 WELD 12,397.2 10680 0.0 10.9 22.59643867 73.54504195

10900 WELD 12,656.8 10900 0.0 11.4 22.59415380 73.54710576

10890 WELD 12,645.0 10890 0.0 11.7 22.59458253 73.54673702

10920 WELD 12,679.6 10920 0.0 11.1 22.59322660 73.54784054

10910 WELD 12,668.2 10910 0.0 11.4 22.59374471 73.54743539

10860 WELD 12,605.8 10860 0.0 14.0 22.59556086 73.54593091

10850 WELD 12,594.5 10850 0.0 11.3 22.59578503 73.54575219

10880 WELD 12,631.2 10880 0.0 13.8 22.59491817 73.54647006

10870 WELD 12,619.8 10870 0.0 11.4 22.59530431 73.54613541

10970 WELD 12,735.8 10970 0.0 11.2 22.59026412 73.55018819

10940 WELD 12,702.2 10940 0.0 11.3 22.59214049 73.54869372

10930 WELD 12,690.7 10930 0.0 11.5 22.59268265 73.54826749

10960 WELD 12,724.9 10960 0.0 10.9 22.59092046 73.54966312

10950 WELD 12,713.5 10950 0.0 11.4 22.59154350 73.54916933


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


11210 WELD 13,013.6 11210 0.0 11.2 22.57704646 73.56007307

11200 WELD 13,002.7 11200 0.0 10.9 22.57655711 73.56069454

11230 WELD 13,036.7 11230 0.0 14.1 22.57793310 73.55893918

11220 WELD 13,024.8 11220 0.0 11.9 22.57748020 73.55951334

11180 WELD 12,977.9 11180 0.0 12.6 22.57661669 73.56091802

11000018 WT CHANGE 12,977.9 11180 0.0 12.6 22.57710413 73.56061289 23.80 70000 0.72

11000019 WT CHANGE 13,002.7 11200 0.0 0.0 22.57596939 73.56158443 15.90 70000 0.72

11190 WELD 12,990.5 11190 0.0 12.2 22.57596358 73.56159322

11250 WELD 13,061.4 11250 0.0 11.3 22.57902027 73.55764343

11240 WELD 13,050.8 11240 0.0 10.6 22.57842999 73.55832731

11070 WELD 12,853.2 11070 0.0 11.4 22.58302995 73.55638579

11060 WELD 12,841.9 11060 0.0 11.2 22.58372405 73.55577526

11090 WELD 12,875.5 11090 0.0 11.0 22.58165634 73.55749294

11080 WELD 12,864.6 11080 0.0 10.9 22.58229373 73.55704410

11030 WELD 12,808.6 11030 0.0 11.4 22.58603820 73.55372602

11020 WELD 12,794.9 11020 0.0 13.7 22.58673979 73.55312564

11050 WELD 12,831.3 11050 0.0 10.6 22.58445665 73.55513166

11040 WELD 12,820.0 11040 0.0 11.3 22.58518570 73.55449287

11150 WELD 12,944.8 11150 0.0 10.2 22.57817670 73.55990680

11140 WELD 12,931.6 11140 0.0 13.2 22.57872086 73.55953651

11170 WELD 12,966.6 11170 0.0 11.3 22.57711213 73.56060788

11160 WELD 12,955.1 11160 0.0 11.5 22.57757264 73.56032610

11110 WELD 12,897.7 11110 0.0 11.9 22.58046655 73.55832034

11100 WELD 12,886.5 11100 0.0 11.2 22.58105774 73.55790858

11130 WELD 12,920.5 11130 0.0 11.1 22.57927308 73.55915560

11120 WELD 12,909.6 11120 0.0 10.9 22.57988116 73.55872646

11010 WELD 12,783.6 11010 0.0 11.3 22.58741998 73.55255386

10980 WELD 12,747.1 10980 0.0 11.8 22.58961977 73.55070321

11000 WELD 12,772.7 11000 0.0 11.0 22.58825342 73.55182965

10990 WELD 12,758.8 10990 0.0 13.8 22.58895731 73.55124360


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


11380 WELD 13,219.5 11380 0.0 11.6 22.58622322 73.54978294

11370 WELD 13,208.2 11370 0.0 11.3 22.58566392 73.55035146

11400 WELD 13,242.6 11400 0.0 13.8 22.58737788 73.54863288

11390 WELD 13,231.1 11390 0.0 11.5 22.58678823 73.54921492

11340 WELD 13,171.6 11340 0.0 13.9 22.58375600 73.55229381

11330 WELD 13,157.6 11330 0.0 14.0 22.58322486 73.55286606

11360 WELD 13,196.8 11360 0.0 11.4 22.58511024 73.55092526

11350 WELD 13,185.5 11350 0.0 11.3 22.58442786 73.55161016

11460 WELD 13,315.3 11460 0.0 11.5 22.59086405 73.54540300

11450 WELD 13,301.9 11450 0.0 13.4 22.59031402 73.54589726

11480 WELD 13,340.1 11480 0.0 11.3 22.59203089 73.54440797

11470 WELD 13,326.7 11470 0.0 13.3 22.59150624 73.54486070

11420 WELD 13,267.9 11420 0.0 11.4 22.58864973 73.54743588

11410 WELD 13,256.4 11410 0.0 11.5 22.58794330 73.54808435

11440 WELD 13,290.5 11440 0.0 11.3 22.58977776 73.54638567

11430 WELD 13,279.3 11430 0.0 11.3 22.58921116 73.54691050

11320 WELD 13,146.1 11320 0.0 11.5 22.58274252 73.55340160

11290 WELD 13,107.6 11290 0.0 14.0 22.58092630 73.55537903

11280 WELD 13,095.6 11280 0.0 12.0 22.58041458 73.55597044

11310 WELD 13,135.4 11310 0.0 10.7 22.58211276 73.55406782

11300 WELD 13,121.6 11300 0.0 13.8 22.58146382 73.55476965

11270 WELD 13,084.0 11270 0.0 11.7 22.57993160 73.55654054

11260 WELD 13,072.7 11260 0.0 11.3 22.57945363 73.55711051

11540 WELD 13,412.3 11540 0.0 13.1 22.59544657 73.54166526

11530 WELD 13,401.2 11530 0.0 11.1 22.59493475 73.54207380

11550 WELD 13,425.4 11550 0.0 10.2 22.59596311 73.54125625

11500 WELD 13,362.9 11500 0.0 13.6 22.59317792 73.54345678

11490 WELD 13,351.4 11490 0.0 11.5 22.59266175 73.54389080

11520 WELD 13,390.0 11520 0.0 11.2 22.59431921 73.54254504

11510 WELD 13,376.5 11510 0.0 13.5 22.59371103 73.54301497


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


11670 WELD 13,556.2 11670 0.0 12.5 22.59955054 73.53860862

11660 WELD 13,543.8 11660 0.0 12.3 22.59950058 73.53862653

11690 WELD 13,581.2 11690 0.0 12.1 22.59945872 73.53871430

11680 WELD 13,568.7 11680 0.0 12.5 22.59961872 73.53858118

11640 WELD 13,520.8 11640 0.0 11.0 22.59895047 73.53897782

11630 WELD 13,507.0 11630 0.0 13.8 22.59871581 73.53913980

11650 WELD 13,531.8 11650 0.0 12.0 22.59925843 73.53879386

11000022 WT CHANGE 13,531.8 11650 0.0 0.0 22.59895836 73.53897311 23.80 70000 0.72

11750 WELD 13,655.1 11750 0.0 12.6 22.59635684 73.54066509

11740 WELD 13,642.8 11740 0.0 12.3 22.59568257 73.54141087

11000023 WT CHANGE 13,679.9 11770 0.0 12.1 22.59503952 73.54154808 15.90 70000 0.72

11760 WELD 13,667.7 11760 0.0 12.2 22.59504799 73.54154231

11710 WELD 13,605.7 11710 0.0 12.4 22.59845719 73.53943385

11700 WELD 13,593.3 11700 0.0 12.3 22.59919222 73.53892064

11730 WELD 13,630.4 11730 0.0 12.4 22.59674805 73.54065052

11720 WELD 13,618.1 11720 0.0 12.3 22.59764029 73.54001128

11620 WELD 13,495.8 11620 0.0 11.2 22.59848617 73.53929664

11560 WELD 13,435.6 11560 0.0 11.2 22.59659976 73.54078152

11590 WELD 13,460.3 11590 0.0 11.3 22.59776393 73.53982749

11580 WELD 13,452.7 11580 0.0 7.6 22.59765250 73.53996522

11610 WELD 13,484.4 11610 0.0 11.4 22.59820239 73.53947822

11600 WELD 13,471.6 11600 0.0 12.8 22.59792786 73.53967183

11570 WELD 13,446.8 11570 0.0 5.8 22.59709408 73.54039013

11000020 WT CHANGE 13,446.8 11570 0.0 0.0 22.59660716 73.54077566 23.80 70000 0.72

11000021 WT CHANGE 13,452.3 11570 0.0 0.3 22.59709776 73.54038733 15.90 70000 0.72

10000003 Bend right 13,449.4 11570 1.3 4.5 22.59709497 73.54038945 0 12:00

11770 WELD 13,679.9 11770 0.0 12.1 22.59371866 73.54244712

11790 WELD 13,706.0 11790 0.0 3.4 22.59121216 73.54416873

11780 WELD 13,692.0 11780 0.0 14.1 22.59244424 73.54331650

11800 WELD 13,709.4 11800 0.0 7.2 22.58983121 73.54515332


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


11970 WELD 13,898.4 11970 0.0 13.4 22.57729960 73.55335180

11960 WELD 13,886.9 11960 0.0 11.5 22.57791712 73.55295004

11990 WELD 13,923.3 11990 0.0 14.0 22.57599567 73.55422560

11980 WELD 13,911.8 11980 0.0 11.6 22.57668530 73.55375419

11930 WELD 13,852.7 11930 0.0 11.4 22.57983960 73.55170052

11920 WELD 13,841.6 11920 0.0 11.2 22.58055739 73.55122315

11950 WELD 13,875.5 11950 0.0 11.4 22.57854322 73.55254447

11940 WELD 13,864.1 11940 0.0 11.4 22.57918152 73.55213223

12050 WELD 13,998.5 12050 0.0 13.9 22.57248655 73.55653490

12040 WELD 13,984.8 12040 0.0 13.7 22.57307818 73.55614434

12070 WELD 14,024.1 12070 0.0 11.0 22.57133763 73.55727250

12060 WELD 14,012.4 12060 0.0 11.6 22.57189062 73.55693137

12010 WELD 13,949.1 12010 0.0 11.2 22.57470536 73.55510221

12000 WELD 13,937.3 12000 0.0 11.8 22.57539947 73.55461912

12030 WELD 13,971.5 12030 0.0 13.3 22.57359488 73.55582125

12020 WELD 13,960.4 12020 0.0 11.2 22.57412133 73.55549138

11910 WELD 13,829.5 11910 0.0 12.1 22.58125721 73.55076603

10000004 Bend right 13,721.3 11810 2.2 5.9 22.58945899 73.54533078 0 12:00

11810 WELD 13,716.6 11810 0.0 8.2 22.58946056 73.54532976

11820 WELD 13,724.7 11820 0.0 11.0 22.58874225 73.54579527

11000025 WT CHANGE 13,724.7 11820 0.0 0.0 22.58945485 73.54533346 15.90 70000 0.72

11000024 WT CHANGE 13,716.5 11810 0.0 0.0 22.58982587 73.54515587 23.80 70000 0.72

11880 WELD 13,792.4 11880 0.0 13.9 22.58369705 73.54911789

11870 WELD 13,781.0 11870 0.0 11.4 22.58471596 73.54839912

11900 WELD 13,818.0 11900 0.0 11.5 22.58201062 73.55026199

11890 WELD 13,806.2 11890 0.0 11.8 22.58290428 73.54964891

11840 WELD 13,747.1 11840 0.0 11.4 22.58714485 73.54680967

11830 WELD 13,735.7 11830 0.0 11.5 22.58803428 73.54623002

11860 WELD 13,767.0 11860 0.0 14.0 22.58536303 73.54799546

11850 WELD 13,758.5 11850 0.0 8.4 22.58623248 73.54741806


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


12300 WELD 14,279.7 12300 0.0 11.3 22.56315924 73.56073711

12290 WELD 14,266.0 12290 0.0 13.8 22.56350264 73.56063515

12320 WELD 14,302.2 12320 0.0 11.5 22.56253679 73.56089831

12310 WELD 14,291.0 12310 0.0 11.2 22.56282302 73.56083325

12260 WELD 14,229.5 12260 0.0 11.3 22.56446519 73.56033715

12250 WELD 14,216.0 12250 0.0 13.5 22.56479031 73.56022028

12280 WELD 14,252.0 12280 0.0 14.0 22.56379559 73.56056273

12270 WELD 14,240.8 12270 0.0 11.2 22.56409177 73.56048737

12370 WELD 14,358.9 12370 0.0 11.4 22.56112530 73.56119795

12340 WELD 14,325.3 12340 0.0 11.1 22.56196738 73.56102380

12330 WELD 14,313.7 12330 0.0 11.6 22.56225435 73.56096020

12360 WELD 14,347.8 12360 0.0 11.2 22.56140499 73.56114142

12350 WELD 14,336.3 12350 0.0 11.4 22.56168082 73.56108618

12240 WELD 14,204.8 12240 0.0 11.2 22.56512324 73.56009708

12130 WELD 14,076.9 12130 0.0 11.3 22.56920095 73.55831205

12120 WELD 14,065.3 12120 0.0 11.6 22.56959263 73.55812304

12150 WELD 14,099.6 12150 0.0 12.3 22.56840791 73.55869700

12140 WELD 14,088.2 12140 0.0 11.4 22.56879716 73.55851041

12090 WELD 14,038.9 12090 0.0 5.1 22.57043444 73.55778555

12080 WELD 14,035.0 12080 0.0 3.9 22.57087182 73.55754077

12110 WELD 14,054.2 12110 0.0 11.1 22.56999750 73.55790495

12100 WELD 14,044.0 12100 0.0 10.2 22.57023606 73.55782817

12210 WELD 14,168.6 12210 0.0 11.5 22.56618528 73.55967718

12200 WELD 14,157.4 12200 0.0 11.3 22.56652754 73.55954417

12230 WELD 14,193.4 12230 0.0 11.4 22.56550439 73.55993842

12220 WELD 14,180.1 12220 0.0 13.3 22.56584537 73.55980778

12170 WELD 14,123.5 12170 0.0 11.2 22.56760940 73.55908496

12160 WELD 14,111.9 12160 0.0 11.5 22.56801890 73.55888309

12190 WELD 14,146.1 12190 0.0 11.2 22.56687682 73.55940534

12180 WELD 14,134.7 12180 0.0 11.4 22.56722557 73.55926621


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


12630 WELD 14,659.5 12630 0.0 11.2 22.55499790 73.56102834

12620 WELD 14,647.6 12620 0.0 11.8 22.55511633 73.56121310

12650 WELD 14,684.4 12650 0.0 9.3 22.55482875 73.56056528

12640 WELD 14,670.7 12640 0.0 13.8 22.55489562 73.56081719

12590 WELD 14,613.6 12590 0.0 11.1 22.55559806 73.56155154

12580 WELD 14,602.5 12580 0.0 11.1 22.55578428 73.56161669

12610 WELD 14,636.0 12610 0.0 11.7 22.55525869 73.56135468

12600 WELD 14,624.7 12600 0.0 11.2 22.55542131 73.56146387

12670 WELD 14,705.7 12670 0.0 11.4 22.55481656 73.55988102

12660 WELD 14,693.7 12660 0.0 12.0 22.55482251 73.56018664

12570 WELD 14,591.9 12570 0.0 10.6 22.55598776 73.56165934

12460 WELD 14,461.0 12460 0.0 11.4 22.55869067 73.56161927

12450 WELD 14,449.9 12450 0.0 11.1 22.55895279 73.56158058

12480 WELD 14,483.7 12480 0.0 11.7 22.55816905 73.56169270

12470 WELD 14,472.4 12470 0.0 11.4 22.55843121 73.56165572

12420 WELD 14,415.9 12420 0.0 11.5 22.55976061 73.56144772

12410 WELD 14,404.3 12410 0.0 11.7 22.56003154 73.56140070

12440 WELD 14,438.7 12440 0.0 11.2 22.55921722 73.56153979

12430 WELD 14,427.4 12430 0.0 11.3 22.55948648 73.56149554

12540 WELD 14,558.2 12540 0.0 11.1 22.55661622 73.56178088

12530 WELD 14,547.2 12530 0.0 11.0 22.55683541 73.56180256

12560 WELD 14,581.0 12560 0.0 10.9 22.55620157 73.56169998

12550 WELD 14,569.3 12550 0.0 11.7 22.55640921 73.56174072

12500 WELD 14,509.2 12500 0.0 13.8 22.55764448 73.56176415

12490 WELD 14,495.4 12490 0.0 13.9 22.55790853 73.56172797

12520 WELD 14,536.2 12520 0.0 11.0 22.55709686 73.56179402

12510 WELD 14,523.0 12510 0.0 13.1 22.55736973 73.56178009

12380 WELD 14,370.3 12380 0.0 11.4 22.56085181 73.56125003

12400 WELD 14,392.9 12400 0.0 11.4 22.56030095 73.56135362

12390 WELD 14,381.7 12390 0.0 11.2 22.56057601 73.56130250


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


12710 WELD 14,755.1 12710 0.0 11.1 22.55445808 73.55975432

12700 WELD 14,742.5 12700 0.0 12.6 22.55471811 73.55938414

12730 WELD 14,777.7 12730 0.0 11.8 22.55381505 73.56068369

12720 WELD 14,766.2 12720 0.0 11.5 22.55413937 73.56022715

12690 WELD 14,731.3 12690 0.0 11.2 22.55498278 73.55895840

12680 WELD 14,717.1 12680 0.0 14.2 22.55488331 73.55943518

12960 WELD 15,036.6 12960 0.0 14.1 22.55307889 73.55863607

12950 WELD 15,023.1 12950 0.0 13.5 22.55292673 73.55885251

12970 WELD 15,050.6 12970 0.0 12.5 22.55320719 73.55848869

12920 WELD 14,988.7 12920 0.0 11.5 22.55229402 73.55982380

12910 WELD 14,977.2 12910 0.0 11.5 22.55203638 73.56024304

12940 WELD 15,011.4 12940 0.0 11.7 22.55275091 73.55911817

12930 WELD 15,000.2 12930 0.0 11.2 22.55253571 73.55944661

12900 WELD 14,966.2 12900 0.0 11.0 22.55174405 73.56072494

12790 WELD 14,846.6 12790 0.0 11.1 22.55110512 73.56444363

12780 WELD 14,835.1 12780 0.0 11.5 22.55161521 73.56375265

12810 WELD 14,869.1 12810 0.0 11.5 22.55066046 73.56442025

12800 WELD 14,857.6 12800 0.0 11.4 22.55086085 73.56446517

12750 WELD 14,800.6 12750 0.0 11.3 22.55301845 73.56180909

12740 WELD 14,789.5 12740 0.0 11.1 22.55343304 73.56122201

12770 WELD 14,823.9 12770 0.0 11.2 22.55212967 73.56303725

12760 WELD 14,811.9 12760 0.0 12.0 22.55259646 73.56239423

12870 WELD 14,932.2 12870 0.0 11.5 22.55073253 73.56247180

12860 WELD 14,920.4 12860 0.0 11.8 22.55034382 73.56318057

12890 WELD 14,954.9 12890 0.0 11.3 22.55143361 73.56125029

12880 WELD 14,943.6 12880 0.0 11.2 22.55109678 73.56183128

12830 WELD 14,892.1 12830 0.0 4.9 22.55040034 73.56408568

12820 WELD 14,880.6 12820 0.0 11.5 22.55050677 73.56429168

12850 WELD 14,908.5 12850 0.0 11.9 22.55029161 73.56362502

12840 WELD 14,896.9 12840 0.0 11.5 22.55034229 73.56380445


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


13240 WELD 15,359.6 13240 0.0 11.2 22.54807337 73.56120555

13230 WELD 15,349.9 13230 0.0 9.8 22.54798614 73.56171958

13250 WELD 15,370.9 13250 0.0 11.5 22.54814372 73.56076745

11000027 WT CHANGE 15,349.8 13230 0.0 0.0 22.54802765 73.56202838 15.90 70000 0.72

13130 WELD 15,235.3 13130 0.0 11.3 22.55112328 73.55847281

13120 WELD 15,224.4 13120 0.0 10.9 22.55140594 73.55806836

13150 WELD 15,260.6 13150 0.0 6.3 22.55037797 73.55952194

13140 WELD 15,246.6 13140 0.0 14.0 22.55077916 73.55895637

13090 WELD 15,190.6 13090 0.0 11.4 22.55013353 73.56043371

13080 WELD 15,179.4 13080 0.0 11.2 22.54972162 73.56126550

13110 WELD 15,213.5 13110 0.0 11.0 22.55097734 73.55882806

13100 WELD 15,202.0 13100 0.0 11.5 22.55054908 73.55962404

13200 WELD 15,312.3 13200 0.0 12.6 22.54807320 73.56272591

11000026 WT CHANGE 15,312.3 13200 0.0 12.6 22.54807320 73.56272591 25.00 70000 0.72

13220 WELD 15,337.3 13220 0.0 12.6 22.54802912 73.56203938

13210 WELD 15,324.9 13210 0.0 12.4 22.54813281 73.56226864

13170 WELD 15,278.2 13170 0.0 11.5 22.54956736 73.56062928

13160 WELD 15,266.9 13160 0.0 11.3 22.54985163 73.56030015

13190 WELD 15,300.9 13190 0.0 11.3 22.54858667 73.56200930

13180 WELD 15,289.7 13180 0.0 11.2 22.54909244 73.56129743

13070 WELD 15,168.0 13070 0.0 11.4 22.54933412 73.56209463

12980 WELD 15,063.2 12980 0.0 11.6 22.55253625 73.55937445

13040 WELD 15,133.8 13040 0.0 11.1 22.54910993 73.56329028

13030 WELD 15,121.4 13030 0.0 12.4 22.54964263 73.56274482

13060 WELD 15,156.6 13060 0.0 11.4 22.54895129 73.56294153

13050 WELD 15,144.9 13050 0.0 11.7 22.54863442 73.56372202

13000 WELD 15,086.2 13000 0.0 11.3 22.55130773 73.56087979

12990 WELD 15,074.8 12990 0.0 11.4 22.55190192 73.56016776

13020 WELD 15,109.0 13020 0.0 12.4 22.55017638 73.56217267

13010 WELD 15,097.5 13010 0.0 11.5 22.55073209 73.56154906


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


13280 WELD 15,404.9 13280 0.0 11.4 22.54843924 73.55926434

13270 WELD 15,393.7 13270 0.0 11.2 22.54833927 73.55976424

13300 WELD 15,427.6 13300 0.0 11.4 22.54862685 73.55829065

13290 WELD 15,416.3 13290 0.0 11.3 22.54853210 73.55877929

13260 WELD 15,382.4 13260 0.0 11.3 22.54823517 73.56027595

13360 WELD 15,490.1 13360 0.0 10.0 22.54936710 73.55513303

13350 WELD 15,487.5 13350 0.0 2.5 22.54920098 73.55574523

13380 WELD 15,511.8 13380 0.0 11.5 22.54944350 73.55451117

13370 WELD 15,500.0 13370 0.0 11.8 22.54933501 73.55497524

13320 WELD 15,450.2 13320 0.0 12.5 22.54885134 73.55727543

13310 WELD 15,438.9 13310 0.0 11.3 22.54873905 73.55778237

13340 WELD 15,473.5 13340 0.0 14.1 22.54909014 73.55623241

13330 WELD 15,462.7 13330 0.0 10.8 22.54896084 73.55677663

13550 WELD 15,708.5 13550 0.0 11.3 22.55304463 73.54454994

13440 WELD 15,584.9 13440 0.0 11.2 22.55058436 73.55095449

13430 WELD 15,573.5 13430 0.0 11.4 22.55038877 73.55152793

13460 WELD 15,607.1 13460 0.0 11.0 22.55100818 73.54978263

13450 WELD 15,596.0 13450 0.0 11.0 22.55078230 73.55037950

13400 WELD 15,534.6 13400 0.0 13.7 22.54975855 73.55341034

13390 WELD 15,523.3 13390 0.0 11.3 22.54960497 73.55395127

13420 WELD 15,562.1 13420 0.0 11.3 22.55013263 73.55222050

13410 WELD 15,548.3 13410 0.0 13.8 22.54990872 73.55287870

13520 WELD 15,673.7 13520 0.0 12.3 22.55234427 73.54630358

13510 WELD 15,662.5 13510 0.0 11.2 22.55212688 73.54686655

13540 WELD 15,697.3 13540 0.0 11.2 22.55282030 73.54511593

13530 WELD 15,686.0 13530 0.0 11.2 22.55256748 73.54573349

13480 WELD 15,629.2 13480 0.0 11.2 22.55145057 73.54861556

13470 WELD 15,618.0 13470 0.0 11.2 22.55123070 73.54919514

13500 WELD 15,651.6 13500 0.0 10.9 22.55190086 73.54744743

13490 WELD 15,640.4 13490 0.0 11.2 22.55167649 73.54802854


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


13750 WELD 15,941.7 13750 0.0 11.9 22.54505431 73.55202073

13740 WELD 15,930.4 13740 0.0 11.3 22.54557677 73.55142901

13770 WELD 15,964.5 13770 0.0 11.6 22.54394913 73.55331269

13760 WELD 15,953.6 13760 0.0 10.9 22.54451273 73.55264686

13710 WELD 15,896.9 13710 0.0 11.4 22.54724900 73.54952461

13700 WELD 15,885.0 13700 0.0 11.9 22.54786507 73.54882132

13730 WELD 15,919.6 13730 0.0 10.8 22.54612120 73.55080597

13720 WELD 15,908.3 13720 0.0 11.3 22.54667301 73.55017904

13830 WELD 16,024.9 13830 0.0 13.8 22.54075358 73.55711199

13820 WELD 16,021.9 13820 0.0 3.0 22.54126253 73.55650662

13790 WELD 15,987.3 13790 0.0 11.5 22.54288204 73.55456306

13780 WELD 15,976.1 13780 0.0 11.2 22.54342950 73.55391375

13810 WELD 16,010.9 13810 0.0 11.0 22.54181882 73.55582835

13800 WELD 15,998.8 13800 0.0 12.1 22.54235500 73.55518855

13600 WELD 15,769.9 13600 0.0 12.3 22.55354766 73.54271508

13590 WELD 15,756.2 13590 0.0 13.7 22.55403295 73.54218360

13610 WELD 15,782.1 13610 0.0 11.2 22.55291551 73.54341650

11000029 WT CHANGE 15,782.1 13610 0.0 0.0 22.55354064 73.54272287 15.90 70000 0.72

13570 WELD 15,733.8 13570 0.0 11.0 22.55349279 73.54342715

13560 WELD 15,719.8 13560 0.0 14.0 22.55326745 73.54398931

13580 WELD 15,744.8 13580 0.0 11.4 22.55380522 73.54273449

11000028 WT CHANGE 15,744.8 13580 0.0 0.0 22.55349673 73.54341842 25.00 70000 0.72

13670 WELD 15,848.4 13670 0.0 11.2 22.54957593 73.54694789

13660 WELD 15,837.3 13660 0.0 11.1 22.55012507 73.54636546

13690 WELD 15,872.1 13690 0.0 12.8 22.54847359 73.54813691

13680 WELD 15,859.6 13680 0.0 12.6 22.54902509 73.54753879

13630 WELD 15,804.0 13630 0.0 11.3 22.55177320 73.54463329

13620 WELD 15,793.3 13620 0.0 10.7 22.55232457 73.54405343

13650 WELD 15,826.3 13650 0.0 11.0 22.55068002 73.54578132

13640 WELD 15,815.3 13640 0.0 11.1 22.55123892 73.54518780


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


13920 WELD 16,127.2 13920 0.0 11.3 22.53649725 73.56224250

13910 WELD 16,116.0 13910 0.0 11.2 22.53698168 73.56163193

13940 WELD 16,152.2 13940 0.0 12.5 22.53552528 73.56348763

13930 WELD 16,138.5 13930 0.0 13.7 22.53601182 73.56286096

13880 WELD 16,082.5 13880 0.0 11.2 22.53847176 73.55977822

13870 WELD 16,071.2 13870 0.0 11.3 22.53898520 73.55914652

13900 WELD 16,104.9 13900 0.0 11.1 22.53747447 73.56101397

13890 WELD 16,093.7 13890 0.0 11.2 22.53797017 73.56039763

13990 WELD 16,207.8 13990 0.0 12.4 22.53314743 73.56660098

13980 WELD 16,195.2 13980 0.0 12.6 22.53360483 73.56600337

14000 WELD 16,220.2 14000 0.0 10.6 22.53313710 73.56618571

11000031 WT CHANGE 16,220.2 14000 0.0 0.0 22.53314716 73.56658998 15.90 70000 0.72

13960 WELD 16,172.9 13960 0.0 11.2 22.53443991 73.56495260

13950 WELD 16,164.6 13950 0.0 8.3 22.53495820 73.56425716

11000030 WT CHANGE 16,195.2 13980 0.0 0.0 22.53406431 73.56540594 25.00 70000 0.72

13970 WELD 16,184.1 13970 0.0 11.1 22.53407010 73.56539841

13860 WELD 16,059.7 13860 0.0 11.5 22.53940216 73.55867149

13850 WELD 16,050.8 13850 0.0 8.9 22.53994535 73.55800554

13840 WELD 16,038.7 13840 0.0 12.1 22.54055848 73.55723732

14060 WELD 16,285.6 14060 0.0 13.9 22.53336123 73.56342359

14050 WELD 16,274.9 14050 0.0 10.7 22.53330585 73.56391745

14080 WELD 16,313.3 14080 0.0 14.0 22.53348467 73.56239945

14070 WELD 16,299.5 14070 0.0 13.8 22.53340515 73.56296855

14020 WELD 16,240.3 14020 0.0 11.4 22.53320702 73.56524992

14010 WELD 16,230.9 14010 0.0 9.4 22.53318133 73.56568379

14040 WELD 16,263.2 14040 0.0 11.7 22.53325214 73.56440746

14030 WELD 16,251.7 14030 0.0 11.5 22.53321975 73.56486357

14100 WELD 16,339.2 14100 0.0 11.2 22.53364137 73.56127457

14090 WELD 16,327.3 14090 0.0 11.9 22.53356212 73.56183901

14110 WELD 16,350.4 14110 0.0 11.3 22.53369649 73.56078937


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


14230 WELD 16,490.5 14230 0.0 13.7 22.53446623 73.55504818

14220 WELD 16,478.6 14220 0.0 11.9 22.53438051 73.55553701

14250 WELD 16,517.8 14250 0.0 11.2 22.53468493 73.55395143

14240 WELD 16,504.2 14240 0.0 13.6 22.53456251 73.55453317

14190 WELD 16,441.9 14190 0.0 13.3 22.53411950 73.55708657

14180 WELD 16,430.5 14180 0.0 11.4 22.53404780 73.55756354

14210 WELD 16,467.4 14210 0.0 11.2 22.53429537 73.55604657

14200 WELD 16,455.2 14200 0.0 12.2 22.53419453 73.55660181

14310 WELD 16,584.6 14310 0.0 11.1 22.53522306 73.55101245

14300 WELD 16,573.8 14300 0.0 10.8 22.53513843 73.55148538

11000032 WT CHANGE 16,606.1 14330 0.0 0.0 22.53530163 73.55055145 25.00 70000 0.72

14320 WELD 16,595.7 14320 0.0 10.5 22.53530003 73.55056057

14270 WELD 16,540.2 14270 0.0 11.0 22.53488965 73.55289941

14260 WELD 16,529.0 14260 0.0 11.1 22.53480459 73.55337924

14290 WELD 16,562.5 14290 0.0 11.3 22.53505398 73.55195922

14280 WELD 16,551.2 14280 0.0 11.3 22.53497247 73.55242690

14170 WELD 16,419.4 14170 0.0 11.1 22.53397670 73.55806383

14140 WELD 16,384.2 14140 0.0 11.8 22.53383563 73.55942495

14130 WELD 16,372.9 14130 0.0 11.3 22.53378951 73.55987783

14160 WELD 16,407.2 14160 0.0 12.2 22.53393261 73.55850724

14150 WELD 16,396.0 14150 0.0 11.2 22.53388188 73.55897270

14120 WELD 16,361.7 14120 0.0 11.3 22.53374264 73.56033421

14330 WELD 16,606.2 14330 0.0 12.3 22.53538008 73.55010206

14380 WELD 16,664.8 14380 0.0 14.1 22.53589580 73.54764450

14370 WELD 16,653.7 14370 0.0 11.1 22.53578177 73.54813893

14390 WELD 16,678.9 14390 0.0 11.3 22.53600695 73.54715842

14340 WELD 16,618.5 14340 0.0 10.5 22.53545136 73.54966716

11000033 WT CHANGE 16,618.4 14340 0.0 0.0 22.53538184 73.55009132 15.90 70000 0.72

14360 WELD 16,642.4 14360 0.0 11.3 22.53564575 73.54870278

14350 WELD 16,629.0 14350 0.0 13.4 22.53555571 73.54915853


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


14550 WELD 16,866.0 14550 0.0 11.1 22.53825668 73.53892724

14540 WELD 16,853.9 14540 0.0 12.0 22.53809833 73.53944395

14570 WELD 16,887.6 14570 0.0 11.7 22.53856387 73.53791807

14560 WELD 16,877.1 14560 0.0 10.5 22.53841934 73.53840407

14510 WELD 16,819.6 14510 0.0 11.2 22.53763944 73.54097379

14500 WELD 16,807.7 14500 0.0 11.9 22.53748780 73.54148502

14530 WELD 16,842.1 14530 0.0 11.8 22.53794797 73.53994683

14520 WELD 16,830.8 14520 0.0 11.4 22.53780158 73.54044371

14630 WELD 16,957.1 14630 0.0 11.3 22.53945461 73.53499118

14620 WELD 16,945.3 14620 0.0 11.8 22.53930625 73.53547481

14650 WELD 16,979.5 14650 0.0 12.9 22.53975727 73.53401734

14640 WELD 16,968.5 14640 0.0 11.1 22.53961091 73.53449406

14590 WELD 16,910.9 14590 0.0 11.0 22.53885117 73.53695447

14580 WELD 16,899.3 14580 0.0 11.7 22.53869665 73.53745653

14610 WELD 16,933.9 14610 0.0 11.4 22.53914813 73.53597868

14600 WELD 16,922.0 14600 0.0 11.9 22.53900612 73.53645331

14490 WELD 16,796.3 14490 0.0 11.4 22.53733684 73.54199687

14400 WELD 16,690.2 14400 0.0 10.9 22.53616895 73.54655831

14460 WELD 16,760.2 14460 0.0 13.6 22.53688294 73.54358235

14450 WELD 16,749.0 14450 0.0 11.3 22.53677177 73.54405680

14480 WELD 16,785.0 14480 0.0 11.3 22.53719101 73.54250040

14470 WELD 16,773.9 14470 0.0 11.1 22.53699388 73.54310985

14420 WELD 16,714.9 14420 0.0 11.6 22.53638898 73.54560025

14410 WELD 16,701.1 14410 0.0 13.8 22.53628219 73.54607118

14440 WELD 16,737.7 14440 0.0 11.3 22.53666002 73.54453401

14430 WELD 16,726.4 14430 0.0 11.3 22.53654312 73.54502428

14670 WELD 17,003.7 14670 0.0 11.1 22.54007408 73.53302304

14660 WELD 16,992.5 14660 0.0 11.2 22.53989818 73.53355235

14690 WELD 17,026.5 14690 0.0 11.3 22.54035720 73.53209783

14680 WELD 17,014.8 14680 0.0 11.7 22.54021719 73.53255688


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


14990 WELD 17,372.7 14990 0.0 11.2 22.54456917 73.52106265

14880 WELD 17,244.6 14880 0.0 11.3 22.54351088 73.52316198

14870 WELD 17,230.6 14870 0.0 14.0 22.54325941 73.52368782

14900 WELD 17,267.3 14900 0.0 11.3 22.54412989 73.52198783

14890 WELD 17,255.9 14890 0.0 11.3 22.54384984 73.52252578

14840 WELD 17,196.4 14840 0.0 11.4 22.54262280 73.52517873

14830 WELD 17,185.4 14830 0.0 11.0 22.54238585 73.52574120

14860 WELD 17,219.2 14860 0.0 11.4 22.54302681 73.52420128

14850 WELD 17,207.8 14850 0.0 11.4 22.54281238 73.52470285

14960 WELD 17,338.1 14960 0.0 10.9 22.54478865 73.52111716

14950 WELD 17,326.8 14950 0.0 11.3 22.54478394 73.52110972

14980 WELD 17,361.3 14980 0.0 11.4 22.54470292 73.52122648

14970 WELD 17,349.0 14970 0.0 12.3 22.54476599 73.52115311

14920 WELD 17,290.1 14920 0.0 14.0 22.54457668 73.52127603

14910 WELD 17,278.6 14910 0.0 11.5 22.54442747 73.52144227

14940 WELD 17,315.4 14940 0.0 11.5 22.54475095 73.52113790

14930 WELD 17,304.2 14930 0.0 11.2 22.54467065 73.52118100

14820 WELD 17,171.8 14820 0.0 13.6 22.54221933 73.52620075

14710 WELD 17,050.1 14710 0.0 11.3 22.54065182 73.53115652

14700 WELD 17,037.8 14700 0.0 12.3 22.54050888 73.53161838

14730 WELD 17,072.5 14730 0.0 11.8 22.54095724 73.53020065

14720 WELD 17,061.4 14720 0.0 11.1 22.54081399 73.53066042

14790 WELD 17,139.0 14790 0.0 10.9 22.54178189 73.52753049

14780 WELD 17,128.1 14780 0.0 10.9 22.54164966 73.52796327

14810 WELD 17,160.9 14810 0.0 11.0 22.54206327 73.52665182

14800 WELD 17,149.9 14800 0.0 10.9 22.54191698 73.52709586

14750 WELD 17,095.3 14750 0.0 10.7 22.54124547 73.52928164

14740 WELD 17,084.3 14740 0.0 11.1 22.54109464 73.52975286

14770 WELD 17,117.2 14770 0.0 10.9 22.54151245 73.52840617

14760 WELD 17,106.1 14760 0.0 11.1 22.54138228 73.52883730


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


15210 WELD 17,632.9 15210 0.0 11.0 22.54203153 73.51722698

15200 WELD 17,621.5 15200 0.0 11.4 22.54219567 73.51734393

15230 WELD 17,654.5 15230 0.0 10.9 22.54170604 73.51699382

15220 WELD 17,643.9 15220 0.0 10.6 22.54186707 73.51710967

15170 WELD 17,587.6 15170 0.0 11.2 22.54268826 73.51769368

15160 WELD 17,576.2 15160 0.0 11.5 22.54285643 73.51781171

15190 WELD 17,610.2 15190 0.0 11.4 22.54235971 73.51746064

15180 WELD 17,598.8 15180 0.0 11.3 22.54252269 73.51757665

15290 WELD 17,722.2 15290 0.0 11.3 22.54079828 73.51622484

15280 WELD 17,710.7 15280 0.0 11.5 22.54094060 73.51636531

15250 WELD 17,676.8 15250 0.0 11.3 22.54138895 73.51676401

15240 WELD 17,665.5 15240 0.0 11.3 22.54154884 73.51687965

15270 WELD 17,699.4 15270 0.0 11.3 22.54108300 73.51650582

15260 WELD 17,688.1 15260 0.0 11.3 22.54122564 73.51664651

15150 WELD 17,564.4 15150 0.0 11.8 22.54302025 73.51792750

15040 WELD 17,428.4 15040 0.0 11.2 22.54427282 73.51991509

15030 WELD 17,417.4 15030 0.0 11.1 22.54428478 73.52019454

15060 WELD 17,453.3 15060 0.0 13.9 22.54430232 73.51930768

15050 WELD 17,439.6 15050 0.0 13.6 22.54428129 73.51961832

15000 WELD 17,383.8 15000 0.0 11.2 22.54446383 73.52087989

15020 WELD 17,406.1 15020 0.0 11.3 22.54431653 73.52045216

15010 WELD 17,395.0 15010 0.0 11.1 22.54437046 73.52068700

15120 WELD 17,530.4 15120 0.0 11.3 22.54355978 73.51826290

15110 WELD 17,516.4 15110 0.0 14.0 22.54376553 73.51836480

15140 WELD 17,553.2 15140 0.0 11.2 22.54318607 73.51804401

15130 WELD 17,541.7 15130 0.0 11.5 22.54335086 73.51815982

15080 WELD 17,477.8 15080 0.0 12.6 22.54444631 73.51851791

15070 WELD 17,467.2 15070 0.0 10.6 22.54436133 73.51892666

15100 WELD 17,502.7 15100 0.0 13.7 22.54395780 73.51846329

15090 WELD 17,490.4 15090 0.0 12.3 22.54417607 73.51853583


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


15310 WELD 17,744.9 15310 0.0 11.2 22.54051165 73.51594190

15300 WELD 17,733.5 15300 0.0 11.4 22.54065437 73.51608284

15530 WELD 17,994.4 15530 0.0 12.3 22.53906467 73.51226957

15520 WELD 17,982.0 15520 0.0 12.5 22.53896499 73.51235739

15550 WELD 18,019.0 15550 0.0 12.1 22.53933098 73.51142247

15540 WELD 18,006.7 15540 0.0 12.3 22.53919482 73.51184694

15490 WELD 17,944.8 15490 0.0 12.3 22.53816240 73.51331756

15480 WELD 17,932.4 15480 0.0 12.4 22.53802990 73.51374650

15510 WELD 17,969.6 15510 0.0 12.4 22.53877478 73.51255636

15500 WELD 17,957.1 15500 0.0 12.4 22.53852683 73.51283650

15570 WELD 18,043.4 15570 0.0 12.4 22.54003480 73.51053848

15560 WELD 18,031.1 15560 0.0 12.3 22.53967596 73.51099508

15580 WELD 18,055.8 15580 0.0 12.4 22.54040189 73.51007624

15470 WELD 17,919.9 15470 0.0 12.5 22.53822274 73.51367662

15370 WELD 17,814.9 15370 0.0 11.6 22.53964948 73.51509001

15360 WELD 17,802.6 15360 0.0 12.3 22.53979276 73.51523171

15390 WELD 17,837.7 15390 0.0 11.4 22.53935620 73.51480022

15380 WELD 17,826.5 15380 0.0 11.3 22.53950055 73.51494299

15330 WELD 17,766.9 15330 0.0 11.2 22.54022707 73.51566073

15320 WELD 17,756.1 15320 0.0 10.8 22.54036859 73.51580062

15350 WELD 17,791.1 15350 0.0 11.4 22.53994657 73.51538318

15340 WELD 17,778.1 15340 0.0 13.0 22.54008811 73.51552318

15450 WELD 17,905.0 15450 0.0 11.3 22.53850622 73.51395783

15440 WELD 17,893.8 15440 0.0 11.2 22.53864535 73.51409595

15460 WELD 17,916.3 15460 0.0 3.6 22.53836473 73.51381749

11000034 WT CHANGE 17,916.3 15460 0.0 0.0 22.53849941 73.51395108 23.80 70000 0.72

15410 WELD 17,860.4 15410 0.0 11.4 22.53907111 73.51451792

15400 WELD 17,849.2 15400 0.0 11.3 22.53921417 73.51465957

15430 WELD 17,883.0 15430 0.0 10.9 22.53878662 73.51423603

15420 WELD 17,871.8 15420 0.0 11.2 22.53892915 73.51437726


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


15610 WELD 18,092.6 15610 0.0 12.4 22.54150473 73.50873187

15600 WELD 18,080.7 15600 0.0 11.9 22.54113895 73.50917123

15630 WELD 18,117.3 15630 0.0 12.3 22.54170736 73.50855388

15620 WELD 18,104.9 15620 0.0 12.4 22.54163446 73.50860732

15590 WELD 18,068.3 15590 0.0 12.4 22.54076897 73.50962413

15860 WELD 18,395.7 15860 0.0 12.3 22.53945191 73.50882890

15850 WELD 18,383.3 15850 0.0 12.4 22.53948888 73.50876707

15880 WELD 18,420.6 15880 0.0 2.7 22.53946088 73.50840707

15870 WELD 18,408.1 15870 0.0 12.5 22.53905659 73.50897238

15820 WELD 18,346.3 15820 0.0 12.4 22.53930180 73.50889584

15810 WELD 18,333.9 15810 0.0 12.4 22.53916796 73.50901929

15840 WELD 18,371.0 15840 0.0 12.3 22.53945057 73.50878328

15830 WELD 18,358.6 15830 0.0 12.4 22.53938552 73.50882893

15800 WELD 18,321.5 15800 0.0 12.4 22.53899870 73.50918848

15690 WELD 18,191.4 15690 0.0 12.4 22.54201716 73.50801454

15680 WELD 18,179.1 15680 0.0 12.3 22.54196217 73.50804834

15710 WELD 18,209.9 15710 0.0 13.3 22.54098168 73.50885308

15700 WELD 18,203.8 15700 0.0 6.1 22.54150229 73.50843217

15650 WELD 18,142.0 15650 0.0 12.5 22.54157432 73.50839743

15640 WELD 18,129.6 15640 0.0 12.4 22.54117900 73.50893918

15670 WELD 18,166.7 15670 0.0 12.3 22.54187647 73.50811694

15660 WELD 18,154.5 15660 0.0 12.2 22.54174086 73.50823814

15770 WELD 18,284.3 15770 0.0 12.4 22.53871435 73.50983640

15760 WELD 18,271.9 15760 0.0 12.4 22.53902956 73.50979428

15790 WELD 18,309.2 15790 0.0 12.2 22.53875593 73.50944682

15780 WELD 18,296.7 15780 0.0 12.6 22.53840241 73.50987686

15730 WELD 18,234.8 15730 0.0 12.4 22.54012017 73.50946371

15720 WELD 18,223.3 15720 0.0 11.5 22.54069001 73.50902367

15750 WELD 18,259.4 15750 0.0 12.5 22.53938904 73.50969134

15740 WELD 18,247.2 15740 0.0 12.2 22.53974344 73.50959922


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


15940 WELD 18,475.2 15940 0.0 12.3 22.53760062 73.50973370

15930 WELD 18,462.9 15930 0.0 12.4 22.53814284 73.50931448

15960 WELD 18,499.9 15960 0.0 12.5 22.53652900 73.51055573

15950 WELD 18,487.6 15950 0.0 12.3 22.53706273 73.51014538

15900 WELD 18,435.7 15900 0.0 12.2 22.53936520 73.50843009

15890 WELD 18,423.3 15890 0.0 12.4 22.53942462 73.50847153

15920 WELD 18,450.4 15920 0.0 12.5 22.53830265 73.50928368

15910 WELD 18,447.9 15910 0.0 2.5 22.53882761 73.50885793

16180 WELD 18,772.4 16180 0.0 12.4 22.53674102 73.50671193

16150 WELD 18,735.3 16150 0.0 12.5 22.53828963 73.50539686

16140 WELD 18,722.8 16140 0.0 12.5 22.53811759 73.50556347

16170 WELD 18,760.1 16170 0.0 12.3 22.53724170 73.50627722

16160 WELD 18,747.8 16160 0.0 12.3 22.53777018 73.50583521

16130 WELD 18,710.4 16130 0.0 12.4 22.53791699 73.50576557

16020 WELD 18,574.5 16020 0.0 12.4 22.53521901 73.51059706

16010 WELD 18,562.1 16010 0.0 12.4 22.53491316 73.51116230

16040 WELD 18,599.3 16040 0.0 12.5 22.53599273 73.50943335

16030 WELD 18,586.9 16030 0.0 12.4 22.53559844 73.51001045

15980 WELD 18,524.7 15980 0.0 12.4 22.53548521 73.51129501

15970 WELD 18,512.4 15970 0.0 12.4 22.53600527 73.51093263

16000 WELD 18,549.7 16000 0.0 12.4 22.53465654 73.51169934

15990 WELD 18,537.2 15990 0.0 12.5 22.53497691 73.51164049

16100 WELD 18,673.3 16100 0.0 12.3 22.53671492 73.50745521

16090 WELD 18,661.2 16090 0.0 12.2 22.53632464 73.50803417

16120 WELD 18,698.1 16120 0.0 12.3 22.53750776 73.50632711

16110 WELD 18,685.7 16110 0.0 12.4 22.53710423 73.50688987

16060 WELD 18,624.1 16060 0.0 12.4 22.53528609 73.50973130

16050 WELD 18,611.8 16050 0.0 12.3 22.53545949 73.50985331

16080 WELD 18,648.8 16080 0.0 12.4 22.53594036 73.50860950

16070 WELD 18,636.5 16070 0.0 12.3 22.53556203 73.50919189


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


16480 WELD 19,141.5 16480 0.0 12.6 22.53346109 73.50457643

16470 WELD 19,129.1 16470 0.0 12.4 22.53386665 73.50443397

16460 WELD 19,115.7 16460 0.0 13.4 22.53426385 73.50426244

16350 WELD 18,980.9 16350 0.0 12.3 22.53668622 73.50438706

16340 WELD 18,968.6 16340 0.0 12.3 22.53699720 73.50407135

16370 WELD 19,006.3 16370 0.0 11.6 22.53602849 73.50450191

16360 WELD 18,993.2 16360 0.0 13.1 22.53633531 73.50447125

16310 WELD 18,931.3 16310 0.0 12.3 22.53695141 73.50405991

16300 WELD 18,918.9 16300 0.0 12.4 22.53653587 73.50460869

16330 WELD 18,956.1 16330 0.0 12.5 22.53714702 73.50389744

16320 WELD 18,943.6 16320 0.0 12.5 22.53706228 73.50396520

16430 WELD 19,079.6 16430 0.0 12.4 22.53582708 73.50317359

16420 WELD 19,067.1 16420 0.0 12.5 22.53542368 73.50367042

16450 WELD 19,104.4 16450 0.0 11.2 22.53473757 73.50400403

16440 WELD 19,092.0 16440 0.0 12.4 22.53528069 73.50358900

16390 WELD 19,030.2 16390 0.0 12.0 22.53550294 73.50445920

16380 WELD 19,017.9 16380 0.0 12.3 22.53573435 73.50450573

16410 WELD 19,054.6 16410 0.0 12.6 22.53533059 73.50405574

16400 WELD 19,042.2 16400 0.0 12.4 22.53526196 73.50441376

16190 WELD 18,784.8 16190 0.0 12.4 22.53621970 73.50714845

16210 WELD 18,809.5 16210 0.0 12.4 22.53514385 73.50798927

16200 WELD 18,797.1 16200 0.0 12.3 22.53568252 73.50758083

16270 WELD 18,883.9 16270 0.0 12.0 22.53551632 73.50623505

16260 WELD 18,871.8 16260 0.0 12.1 22.53513955 73.50683128

16290 WELD 18,906.4 16290 0.0 12.4 22.53621746 73.50511001

16280 WELD 18,895.9 16280 0.0 10.5 22.53585180 73.50567379

16230 WELD 18,834.3 16230 0.0 12.4 22.53433516 73.50834946

16220 WELD 18,821.9 16220 0.0 12.3 22.53463607 73.50832023

16250 WELD 18,859.0 16250 0.0 12.8 22.53475523 73.50741479

16240 WELD 18,846.7 16240 0.0 12.4 22.53437959 73.50800203


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


16520 WELD 19,191.3 16520 0.0 11.2 22.53389192 73.50307974

16510 WELD 19,178.9 16510 0.0 12.5 22.53349246 73.50365087

16540 WELD 19,216.1 16540 0.0 12.3 22.53439844 73.50251722

16530 WELD 19,202.6 16530 0.0 13.5 22.53417808 73.50276516

16500 WELD 19,166.4 16500 0.0 12.4 22.53335823 73.50407465

16490 WELD 19,154.0 16490 0.0 12.4 22.53336118 73.50437586

16600 WELD 19,290.4 16600 0.0 12.5 22.53160680 73.50445354

16590 WELD 19,278.0 16590 0.0 12.4 22.53185863 73.50448356

16620 WELD 19,315.0 16620 0.0 12.6 22.53142212 73.50404023

16610 WELD 19,302.9 16610 0.0 12.1 22.53142020 73.50434696

16560 WELD 19,240.9 16560 0.0 12.3 22.53336617 73.50341645

16550 WELD 19,228.4 16550 0.0 12.5 22.53388798 73.50298468

16580 WELD 19,265.7 16580 0.0 12.3 22.53229908 73.50426933

16570 WELD 19,253.2 16570 0.0 12.5 22.53283261 73.50385519

16680 WELD 19,389.7 16680 0.0 12.3 22.53051815 73.50463985

16670 WELD 19,377.0 16670 0.0 12.7 22.53096243 73.50422003

16700 WELD 19,414.3 16700 0.0 12.6 22.52950769 73.50530742

16690 WELD 19,402.0 16690 0.0 12.3 22.52999143 73.50500783

16640 WELD 19,340.1 16640 0.0 11.4 22.53168691 73.50348534

16630 WELD 19,327.6 16630 0.0 12.5 22.53152032 73.50364912

16660 WELD 19,364.8 16660 0.0 12.3 22.53140449 73.50378273

16650 WELD 19,351.5 16650 0.0 13.3 22.53173281 73.50346168

16760 WELD 19,488.6 16760 0.0 12.3 22.52982231 73.50429191

16750 WELD 19,476.3 16750 0.0 12.4 22.52971302 73.50439317

16780 WELD 19,513.3 16780 0.0 12.4 22.52920115 73.50495062

16770 WELD 19,500.9 16770 0.0 12.4 22.52953079 73.50460500

16720 WELD 19,439.3 16720 0.0 12.1 22.52865887 73.50572175

16710 WELD 19,426.9 16710 0.0 12.4 22.52903091 73.50559632

16740 WELD 19,464.0 16740 0.0 12.3 22.52937112 73.50481024

16730 WELD 19,451.5 16730 0.0 12.5 22.52902662 73.50524584


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


16850 WELD 19,598.9 16850 0.0 12.0 22.52593128 73.50742729

16840 WELD 19,586.7 16840 0.0 12.2 22.52637263 73.50717472

16870 WELD 19,623.3 16870 0.0 12.2 22.52514523 73.50777842

16860 WELD 19,610.9 16860 0.0 12.4 22.52552906 73.50761387

16810 WELD 19,550.4 16810 0.0 12.4 22.52785444 73.50617219

16800 WELD 19,538.0 16800 0.0 12.4 22.52838205 73.50577158

16830 WELD 19,574.7 16830 0.0 12.0 22.52684019 73.50687972

16820 WELD 19,562.8 16820 0.0 12.0 22.52734089 73.50653756

16930 WELD 19,693.1 16930 0.0 12.4 22.52394424 73.50799145

16920 WELD 19,685.2 16920 0.0 7.9 22.52443806 73.50764540

16950 WELD 19,717.8 16950 0.0 9.4 22.52425355 73.50713125

16940 WELD 19,705.6 16940 0.0 12.2 22.52402739 73.50766018

16890 WELD 19,647.9 16890 0.0 12.4 22.52444314 73.50800570

16880 WELD 19,635.5 16880 0.0 12.3 22.52477915 73.50791129

16910 WELD 19,672.8 16910 0.0 12.4 22.52450288 73.50754319

16900 WELD 19,660.3 16900 0.0 12.5 22.52412899 73.50806822

16790 WELD 19,525.7 16790 0.0 12.3 22.52880350 73.50535162

16960 WELD 19,727.2 16960 0.0 12.4 22.52447414 73.50661284

17020 WELD 19,791.9 17020 0.0 12.2 22.52584133 73.50381540

17010 WELD 19,779.4 17010 0.0 12.5 22.52545126 73.50438420

17040 WELD 19,816.4 17040 0.0 12.4 22.52588680 73.50381387

17030 WELD 19,804.2 17030 0.0 12.3 22.52587366 73.50380510

16980 WELD 19,751.7 16980 0.0 3.0 22.52486996 73.50566494

16970 WELD 19,739.5 16970 0.0 12.2 22.52463575 73.50619349

17000 WELD 19,767.1 17000 0.0 12.4 22.52509163 73.50497550

16990 WELD 19,754.8 16990 0.0 12.3 22.52508502 73.50515656

17060 WELD 19,841.2 17060 0.0 12.4 22.52591454 73.50383272

17050 WELD 19,828.9 17050 0.0 12.4 22.52590016 73.50382282

17080 WELD 19,865.9 17080 0.0 12.3 22.52489849 73.50454326

17070 WELD 19,853.6 17070 0.0 12.3 22.52540566 73.50418778


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


17190 WELD 20,001.7 17190 0.0 12.0 22.52327232 73.50402143

17180 WELD 19,989.5 17180 0.0 12.2 22.52344871 73.50380603

17210 WELD 20,026.0 17210 0.0 12.1 22.52235663 73.50488076

17200 WELD 20,013.7 17200 0.0 12.3 22.52286083 73.50444055

17150 WELD 19,952.3 17150 0.0 12.5 22.52334776 73.50416030

17140 WELD 19,940.0 17140 0.0 12.3 22.52337456 73.50444543

17170 WELD 19,977.1 17170 0.0 12.3 22.52355939 73.50365812

17160 WELD 19,964.7 17160 0.0 12.4 22.52349266 73.50370985

17270 WELD 20,099.8 17270 0.0 12.4 22.52357781 73.50211488

17260 WELD 20,087.4 17260 0.0 12.5 22.52320620 73.50267149

17290 WELD 20,124.5 17290 0.0 12.2 22.52436897 73.50097156

17280 WELD 20,112.2 17280 0.0 12.3 22.52397243 73.50153557

17230 WELD 20,050.8 17230 0.0 12.3 22.52229976 73.50439834

17220 WELD 20,038.1 17220 0.0 12.7 22.52204224 73.50494300

17250 WELD 20,075.5 17250 0.0 11.9 22.52289117 73.50325104

17240 WELD 20,063.1 17240 0.0 12.4 22.52259029 73.50382239

17130 WELD 19,927.6 17130 0.0 12.5 22.52345550 73.50466870

17100 WELD 19,890.5 17100 0.0 12.4 22.52424974 73.50468470

17090 WELD 19,878.2 17090 0.0 12.3 22.52457360 73.50461433

17120 WELD 19,915.3 17120 0.0 12.2 22.52365100 73.50476150

17110 WELD 19,902.9 17110 0.0 12.4 22.52393826 73.50473987

17350 WELD 20,198.6 17350 0.0 12.3 22.52285362 73.50178167

17340 WELD 20,186.3 17340 0.0 12.3 22.52336799 73.50141075

17370 WELD 20,223.1 17370 0.0 12.6 22.52186006 73.50246706

17360 WELD 20,210.9 17360 0.0 12.3 22.52235116 73.50213451

17310 WELD 20,149.2 17310 0.0 12.4 22.52494784 73.50022531

17300 WELD 20,136.7 17300 0.0 12.5 22.52476047 73.50042637

17330 WELD 20,173.9 17330 0.0 12.4 22.52388572 73.50103100

17320 WELD 20,161.6 17320 0.0 12.3 22.52441113 73.50063855

17380 WELD 20,235.7 17380 0.0 12.3 22.52137134 73.50279913


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


17680 WELD 20,605.7 17680 0.0 12.4 22.51946865 73.50063394

17670 WELD 20,593.4 17670 0.0 12.3 22.51908023 73.50118578

17640 WELD 20,556.4 17640 0.0 12.4 22.51792564 73.50293424

17630 WELD 20,544.0 17630 0.0 12.4 22.51767041 73.50349171

17660 WELD 20,581.1 17660 0.0 12.3 22.51869427 73.50174145

17650 WELD 20,568.7 17650 0.0 12.3 22.51830699 73.50233264

17520 WELD 20,408.0 17520 0.0 12.3 22.51962459 73.50259773

17510 WELD 20,395.6 17510 0.0 12.4 22.51927741 73.50319440

17540 WELD 20,432.6 17540 0.0 12.4 22.52033947 73.50139878

17530 WELD 20,420.3 17530 0.0 12.4 22.51998311 73.50199540

17480 WELD 20,358.6 17480 0.0 12.3 22.51958781 73.50364286

17470 WELD 20,346.3 17470 0.0 12.3 22.52010733 73.50322057

17500 WELD 20,383.3 17500 0.0 12.3 22.51894243 73.50379530

17490 WELD 20,370.9 17490 0.0 12.4 22.51925799 73.50372898

17600 WELD 20,506.6 17600 0.0 12.5 22.51898513 73.50257959

17590 WELD 20,494.4 17590 0.0 12.2 22.51947148 73.50211020

17620 WELD 20,531.5 17620 0.0 12.4 22.51794135 73.50348698

17610 WELD 20,519.1 17610 0.0 12.4 22.51846959 73.50303200

17560 WELD 20,457.5 17560 0.0 12.3 22.52083324 73.50076236

17550 WELD 20,445.0 17550 0.0 12.5 22.52072025 73.50087233

17580 WELD 20,482.0 17580 0.0 12.4 22.51992841 73.50165871

17570 WELD 20,469.8 17570 0.0 12.3 22.52038565 73.50120940

17460 WELD 20,334.0 17460 0.0 12.3 22.52060298 73.50275186

17430 WELD 20,296.8 17430 0.0 12.5 22.52148547 73.50180905

17420 WELD 20,284.7 17420 0.0 12.1 22.52145143 73.50182178

17450 WELD 20,321.6 17450 0.0 12.4 22.52107843 73.50229286

17440 WELD 20,309.3 17440 0.0 12.4 22.52131586 73.50201490

17390 WELD 20,247.9 17390 0.0 12.4 22.52089797 73.50309525

17410 WELD 20,272.2 17410 0.0 12.5 22.52108387 73.50237194

17400 WELD 20,260.3 17400 0.0 11.9 22.52073239 73.50296854


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


17850 WELD 20,802.9 17850 0.0 12.3 22.51805758 73.50004101

17840 WELD 20,790.4 17840 0.0 12.5 22.51787282 73.50029836

17870 WELD 20,827.6 17870 0.0 12.3 22.51831022 73.49978616

17860 WELD 20,815.2 17860 0.0 12.4 22.51820109 73.49989354

17810 WELD 20,765.7 17810 0.0 12.2 22.51704557 73.50162591

17800 WELD 20,753.1 17800 0.0 12.6 22.51694129 73.50204326

17830 WELD 20,781.0 17830 0.0 9.4 22.51782860 73.50048225

17820 WELD 20,777.9 17820 0.0 3.1 22.51744447 73.50103254

17930 WELD 20,901.6 17930 0.0 12.4 22.51646275 73.50150782

17920 WELD 20,889.2 17920 0.0 12.4 22.51699472 73.50106984

17950 WELD 20,925.6 17950 0.0 13.2 22.51596892 73.50151892

17940 WELD 20,914.0 17940 0.0 11.6 22.51598417 73.50182124

17890 WELD 20,852.2 17890 0.0 12.4 22.51828574 73.49986606

17880 WELD 20,840.0 17880 0.0 12.3 22.51831498 73.49980701

17910 WELD 20,877.0 17910 0.0 12.3 22.51753238 73.50060839

17900 WELD 20,864.6 17900 0.0 12.3 22.51806748 73.50012538

17790 WELD 20,741.2 17790 0.0 11.9 22.51705429 73.50223355

17700 WELD 20,630.7 17700 0.0 12.2 22.52005964 73.49987910

17690 WELD 20,618.1 17690 0.0 12.6 22.51984595 73.50012049

17760 WELD 20,704.5 17760 0.0 11.8 22.51785710 73.50212086

17750 WELD 20,692.3 17750 0.0 12.2 22.51839096 73.50164757

17780 WELD 20,728.8 17780 0.0 12.4 22.51718400 73.50240542

17770 WELD 20,716.4 17770 0.0 12.4 22.51733338 73.50254494

17720 WELD 20,655.2 17720 0.0 12.4 22.51961476 73.50040255

17710 WELD 20,642.8 17710 0.0 12.3 22.51983599 73.50014471

17740 WELD 20,679.8 17740 0.0 12.4 22.51890242 73.50117025

17730 WELD 20,667.5 17730 0.0 12.3 22.51929518 73.50075536

17970 WELD 20,951.2 17970 0.0 12.3 22.51665503 73.50029672

17960 WELD 20,938.9 17960 0.0 12.3 22.51624724 73.50095879

17980 WELD 20,963.5 17980 0.0 12.5 22.51703907 73.49967883


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


18180 WELD 21,197.6 18180 0.0 13.9 22.51466236 73.50120230

18170 WELD 21,184.6 18170 0.0 13.0 22.51497527 73.50085024

18200 WELD 21,222.3 18200 0.0 12.3 22.51352504 73.50232966

18190 WELD 21,211.5 18190 0.0 10.8 22.51412155 73.50174534

18140 WELD 21,148.6 18140 0.0 12.1 22.51574812 73.49994070

18130 WELD 21,136.4 18130 0.0 12.2 22.51594554 73.49969645

18160 WELD 21,172.9 18160 0.0 11.7 22.51526132 73.50051830

18150 WELD 21,160.7 18150 0.0 12.1 22.51551703 73.50021730

18260 WELD 21,296.3 18260 0.0 12.4 22.51210795 73.50257780

18250 WELD 21,284.0 18250 0.0 12.3 22.51175792 73.50322042

18280 WELD 21,320.3 18280 0.0 13.2 22.51288957 73.50129253

18270 WELD 21,308.7 18270 0.0 11.6 22.51248634 73.50193312

18220 WELD 21,246.7 18220 0.0 12.5 22.51251872 73.50313463

18210 WELD 21,234.7 18210 0.0 12.1 22.51304499 73.50271351

18240 WELD 21,271.7 18240 0.0 12.4 22.51165168 73.50366143

18230 WELD 21,259.2 18230 0.0 12.4 22.51201497 73.50352199

18120 WELD 21,124.1 18120 0.0 12.4 22.51611249 73.49948839

18010 WELD 21,000.3 18010 0.0 12.3 22.51803487 73.49832287

18000 WELD 20,987.8 18000 0.0 12.4 22.51776203 73.49865730

18030 WELD 21,024.8 18030 0.0 12.4 22.51777775 73.49865067

18020 WELD 21,012.6 18020 0.0 12.3 22.51800789 73.49838022

17990 WELD 20,975.9 17990 0.0 11.9 22.51743229 73.49906974

18090 WELD 21,099.1 18090 0.0 9.7 22.51599339 73.50029524

18080 WELD 21,086.8 18080 0.0 12.3 22.51607632 73.50052117

18110 WELD 21,111.9 18110 0.0 12.1 22.51620647 73.49948490

18100 WELD 21,108.8 18100 0.0 3.1 22.51611136 73.49985844

18050 WELD 21,049.7 18050 0.0 12.3 22.51722712 73.49928171

18040 WELD 21,037.3 18040 0.0 12.4 22.51750443 73.49896231

18070 WELD 21,074.4 18070 0.0 12.4 22.51652332 73.50005622

18060 WELD 21,062.0 18060 0.0 12.3 22.51691172 73.49963758


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


18510 WELD 21,604.8 18510 0.0 11.7 22.50826072 73.50446105

18500 WELD 21,593.4 18500 0.0 11.4 22.50882342 73.50393046

18530 WELD 21,627.6 18530 0.0 13.2 22.50723475 73.50541120

18520 WELD 21,616.5 18520 0.0 11.1 22.50775192 73.50492949

18470 WELD 21,552.7 18470 0.0 13.9 22.51055451 73.50230982

18460 WELD 21,541.4 18460 0.0 11.3 22.51115075 73.50175466

18490 WELD 21,580.6 18490 0.0 12.8 22.50943397 73.50334617

18480 WELD 21,566.6 18480 0.0 14.0 22.51004470 73.50276608

18550 WELD 21,652.2 18550 0.0 12.0 22.50616970 73.50642215

18540 WELD 21,640.8 18540 0.0 11.4 22.50674264 73.50586505

18570 WELD 21,675.3 18570 0.0 11.2 22.50515061 73.50736249

18560 WELD 21,664.2 18560 0.0 11.0 22.50566947 73.50688708

18450 WELD 21,527.9 18450 0.0 13.5 22.51167713 73.50128528

18350 WELD 21,408.0 18350 0.0 12.7 22.51511686 73.49842480

18340 WELD 21,394.1 18340 0.0 14.0 22.51483847 73.49879262

18370 WELD 21,433.8 18370 0.0 12.6 22.51583575 73.49755191

18360 WELD 21,420.7 18360 0.0 13.1 22.51549530 73.49797149

18310 WELD 21,361.0 18310 0.0 11.2 22.51392110 73.49997165

18300 WELD 21,347.4 18300 0.0 13.6 22.51354098 73.50044359

18330 WELD 21,383.2 18330 0.0 10.9 22.51456094 73.49916035

18320 WELD 21,372.2 18320 0.0 10.9 22.51427605 73.49953513

18420 WELD 21,493.5 18420 0.0 11.7 22.51324114 73.49991274

18410 WELD 21,482.1 18410 0.0 11.4 22.51375336 73.49947151

18440 WELD 21,516.3 18440 0.0 11.6 22.51218572 73.50083966

18430 WELD 21,505.2 18430 0.0 11.1 22.51271827 73.50036909

18380 WELD 21,446.4 18380 0.0 13.3 22.51544962 73.49798485

11000035 WT CHANGE 21,446.3 18380 0.0 0.1 22.51582865 73.49755986 15.90 70000 0.72

18400 WELD 21,470.9 18400 0.0 11.1 22.51427202 73.49902572

18390 WELD 21,459.7 18390 0.0 11.3 22.51487457 73.49848786

18290 WELD 21,333.5 18290 0.0 13.9 22.51318756 73.50089266


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


18590 WELD 21,697.9 18590 0.0 11.1 22.50420434 73.50817400

18580 WELD 21,686.5 18580 0.0 11.4 22.50467677 73.50777297

18610 WELD 21,721.6 18610 0.0 13.7 22.50336280 73.50876041

18600 WELD 21,709.0 18600 0.0 12.5 22.50377255 73.50848234

18840 WELD 21,991.0 18840 0.0 11.9 22.50153647 73.50728551

18830 WELD 21,979.7 18830 0.0 11.3 22.50197671 73.50694272

18860 WELD 22,016.7 18860 0.0 11.5 22.50073697 73.50779424

18850 WELD 22,002.9 18850 0.0 13.9 22.50109644 73.50761851

18800 WELD 21,945.8 18800 0.0 11.6 22.50338852 73.50564871

18790 WELD 21,934.7 18790 0.0 11.1 22.50385083 73.50514189

18820 WELD 21,968.8 18820 0.0 10.9 22.50244615 73.50655615

18810 WELD 21,957.4 18810 0.0 11.4 22.50293243 73.50613935

18870 WELD 22,028.3 18870 0.0 10.7 22.50059544 73.50761226

18780 WELD 21,923.2 18780 0.0 11.5 22.50411494 73.50481301

18670 WELD 21,792.0 18670 0.0 11.3 22.50245139 73.50800547

18660 WELD 21,780.9 18660 0.0 11.1 22.50241976 73.50836898

18690 WELD 21,814.6 18690 0.0 11.5 22.50269906 73.50707545

18680 WELD 21,803.4 18680 0.0 11.3 22.50256012 73.50755754

18630 WELD 21,746.4 18630 0.0 11.6 22.50269332 73.50898223

18620 WELD 21,735.3 18620 0.0 11.1 22.50303031 73.50887786

18650 WELD 21,769.6 18650 0.0 11.3 22.50241058 73.50871226

18640 WELD 21,757.9 18640 0.0 11.7 22.50243028 73.50901850

18750 WELD 21,888.8 18750 0.0 11.7 22.50432885 73.50452745

18740 WELD 21,877.9 18740 0.0 10.9 22.50419181 73.50469327

18770 WELD 21,911.9 18770 0.0 11.3 22.50433911 73.50452609

18760 WELD 21,900.4 18760 0.0 11.5 22.50443182 73.50439101

18710 WELD 21,840.2 18710 0.0 14.3 22.50336859 73.50584545

18700 WELD 21,826.1 18700 0.0 14.2 22.50302529 73.50646187

18730 WELD 21,865.7 18730 0.0 12.1 22.50404297 73.50489297

18720 WELD 21,854.5 18720 0.0 11.2 22.50381110 73.50516463


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


19170 WELD 22,365.2 19170 0.0 11.1 22.49792875 73.50555782

19160 WELD 22,353.7 19160 0.0 11.4 22.49798131 73.50583302

19130 WELD 22,318.7 19130 0.0 11.7 22.49847823 73.50614513

19120 WELD 22,307.4 19120 0.0 11.3 22.49882008 73.50598909

19150 WELD 22,341.5 19150 0.0 12.2 22.49806224 73.50605508

19140 WELD 22,330.4 19140 0.0 11.1 22.49816541 73.50625560

19110 WELD 22,296.0 19110 0.0 11.4 22.49923482 73.50571129

19000 WELD 22,171.5 19000 0.0 11.6 22.50275972 73.50216029

18990 WELD 22,160.5 18990 0.0 11.0 22.50262813 73.50234346

19020 WELD 22,194.4 19020 0.0 10.9 22.50274701 73.50218560

19010 WELD 22,183.1 19010 0.0 11.3 22.50287592 73.50200818

18960 WELD 22,127.6 18960 0.0 11.7 22.50179732 73.50360852

18950 WELD 22,115.9 18950 0.0 11.7 22.50145975 73.50421266

18980 WELD 22,149.9 18980 0.0 10.6 22.50247915 73.50255113

18970 WELD 22,139.3 18970 0.0 10.7 22.50214375 73.50306273

19080 WELD 22,261.8 19080 0.0 11.1 22.50062062 73.50457146

19070 WELD 22,250.3 19070 0.0 11.5 22.50110524 73.50407980

19100 WELD 22,284.5 19100 0.0 11.5 22.49967701 73.50538700

19090 WELD 22,272.8 19090 0.0 11.7 22.50011738 73.50505108

19040 WELD 22,216.4 19040 0.0 11.5 22.50229901 73.50274136

19030 WELD 22,205.3 19030 0.0 11.1 22.50258017 73.50240338

19060 WELD 22,239.2 19060 0.0 11.1 22.50159419 73.50357559

19050 WELD 22,227.9 19050 0.0 11.3 22.50197106 73.50313100

18920 WELD 22,081.5 18920 0.0 11.7 22.50050175 73.50620006

18910 WELD 22,067.3 18910 0.0 14.2 22.50039511 73.50669198

18940 WELD 22,104.7 18940 0.0 11.2 22.50116138 73.50483038

18930 WELD 22,093.3 18930 0.0 11.5 22.50086516 73.50545747

18880 WELD 22,038.9 18880 0.0 3.9 22.50049921 73.50740490

18900 WELD 22,053.4 18900 0.0 13.9 22.50036104 73.50704789

18890 WELD 22,042.9 18890 0.0 10.6 22.50042713 73.50717909


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


19190 WELD 22,388.9 19190 0.0 14.0 22.49802882 73.50478482

19180 WELD 22,376.3 19180 0.0 12.6 22.49796708 73.50518244

19250 WELD 22,462.6 19250 0.0 12.7 22.49982845 73.50104737

19240 WELD 22,448.6 19240 0.0 13.9 22.49947409 73.50164185

19270 WELD 22,486.8 19270 0.0 7.0 22.50065047 73.49980403

19260 WELD 22,475.3 19260 0.0 11.5 22.50027505 73.50035604

19210 WELD 22,414.3 19210 0.0 11.6 22.49853920 73.50351390

19200 WELD 22,402.8 19200 0.0 11.5 22.49825316 73.50419033

19230 WELD 22,437.2 19230 0.0 11.5 22.49915658 73.50225986

19220 WELD 22,425.9 19220 0.0 11.3 22.49883924 73.50289086

19460 WELD 22,699.5 19460 0.0 11.8 22.49690858 73.50348365

19450 WELD 22,688.6 19450 0.0 10.9 22.49740214 73.50306746

19470 WELD 22,711.3 19470 0.0 10.8 22.49646331 73.50383591

19440 WELD 22,676.7 19440 0.0 11.9 22.49791318 73.50257955

19330 WELD 22,550.3 19330 0.0 11.6 22.50157167 73.49851380

19320 WELD 22,539.2 19320 0.0 11.1 22.50150718 73.49858736

19350 WELD 22,572.9 19350 0.0 11.2 22.50142503 73.49871030

19340 WELD 22,561.9 19340 0.0 11.0 22.50161738 73.49846213

19290 WELD 22,505.4 19290 0.0 11.2 22.50100559 73.49925161

19280 WELD 22,493.9 19280 0.0 11.5 22.50089251 73.49946899

19310 WELD 22,527.9 19310 0.0 11.3 22.50142211 73.49868831

19300 WELD 22,516.5 19300 0.0 11.4 22.50122505 73.49895507

19410 WELD 22,642.4 19410 0.0 11.9 22.49945478 73.50102323

19400 WELD 22,630.5 19400 0.0 11.9 22.49990260 73.50053318

19430 WELD 22,665.2 19430 0.0 11.5 22.49840250 73.50210448

19420 WELD 22,654.3 19420 0.0 10.9 22.49893201 73.50157032

19370 WELD 22,596.3 19370 0.0 11.7 22.50098884 73.49925000

19360 WELD 22,584.1 19360 0.0 12.2 22.50121734 73.49896622

19390 WELD 22,619.4 19390 0.0 11.1 22.50031973 73.50005856

19380 WELD 22,608.0 19380 0.0 11.4 22.50072235 73.49959173


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


19500 WELD 22,744.6 19500 0.0 11.5 22.49537594 73.50441050

19490 WELD 22,733.7 19490 0.0 10.9 22.49570358 73.50427965

19520 WELD 22,768.1 19520 0.0 11.1 22.49507529 73.50415957

19510 WELD 22,756.1 19510 0.0 12.0 22.49514301 73.50440513

19480 WELD 22,722.2 19480 0.0 11.5 22.49604218 73.50411807

19580 WELD 22,836.4 19580 0.0 11.4 22.49570459 73.50148821

19570 WELD 22,825.0 19570 0.0 11.4 22.49542989 73.50210108

19600 WELD 22,859.4 19600 0.0 11.8 22.49630311 73.50023685

19590 WELD 22,847.8 19590 0.0 11.6 22.49599545 73.50086609

19540 WELD 22,790.8 19540 0.0 11.2 22.49501347 73.50357205

19530 WELD 22,779.2 19530 0.0 11.5 22.49503657 73.50386893

19560 WELD 22,813.6 19560 0.0 11.4 22.49527293 73.50261171

19550 WELD 22,802.0 19550 0.0 11.6 22.49513946 73.50309241

19610 WELD 22,871.2 19610 0.0 13.9 22.49665396 73.49959296

19670 WELD 22,942.3 19670 0.0 11.7 22.49856159 73.49670265

19660 WELD 22,930.7 19660 0.0 11.7 22.49833212 73.49701496

19690 WELD 22,965.2 19690 0.0 11.4 22.49867677 73.49658509

19680 WELD 22,954.1 19680 0.0 11.1 22.49863773 73.49661840

19630 WELD 22,896.5 19630 0.0 11.5 22.49746522 73.49828524

19620 WELD 22,885.1 19620 0.0 11.4 22.49702454 73.49894626

19650 WELD 22,919.2 19650 0.0 11.5 22.49807952 73.49737145

19640 WELD 22,908.0 19640 0.0 11.2 22.49780771 73.49775726

19750 WELD 23,027.9 19750 0.0 10.9 22.49760942 73.49784041

19740 WELD 23,016.5 19740 0.0 11.5 22.49801713 73.49732083

19770 WELD 23,050.3 19770 0.0 11.6 22.49672131 73.49882659

19760 WELD 23,038.8 19760 0.0 11.5 22.49716070 73.49834371

19710 WELD 22,988.2 19710 0.0 11.5 22.49860834 73.49669396

19700 WELD 22,976.6 19700 0.0 11.6 22.49866356 73.49661057

19730 WELD 23,002.5 19730 0.0 14.0 22.49814912 73.49727518

19720 WELD 22,999.7 19720 0.0 2.8 22.49841847 73.49694112


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


19840 WELD 23,132.9 19840 0.0 11.6 22.49353988 73.50139173

19830 WELD 23,121.6 19830 0.0 11.3 22.49385414 73.50128331

19860 WELD 23,155.9 19860 0.0 12.3 22.49309252 73.50133607

19850 WELD 23,144.5 19850 0.0 11.4 22.49328377 73.50141359

19800 WELD 23,084.6 19800 0.0 11.4 22.49518472 73.50034285

19790 WELD 23,073.2 19790 0.0 11.3 22.49569101 73.49988181

19820 WELD 23,110.2 19820 0.0 11.4 22.49425092 73.50109570

19810 WELD 23,096.0 19810 0.0 14.2 22.49469280 73.50077311

19920 WELD 23,225.2 19920 0.0 11.4 22.49311209 73.49935642

19910 WELD 23,213.4 19910 0.0 11.8 22.49302046 73.49978814

19940 WELD 23,248.0 19940 0.0 11.6 22.49349909 73.49826599

19930 WELD 23,236.7 19930 0.0 11.4 22.49329527 73.49881711

19880 WELD 23,179.7 19880 0.0 11.7 22.49289651 73.50091890

19870 WELD 23,168.2 19870 0.0 11.5 22.49293730 73.50121016

19900 WELD 23,202.2 19900 0.0 11.2 22.49294701 73.50019534

19890 WELD 23,191.4 19890 0.0 10.9 22.49288446 73.50060331

19780 WELD 23,061.8 19780 0.0 11.4 22.49621579 73.49936058

20000 WELD 23,317.4 20000 0.0 11.4 22.49529681 73.49454662

19990 WELD 23,305.8 19990 0.0 11.5 22.49494662 73.49518761

20020 WELD 23,339.9 20020 0.0 11.3 22.49602995 73.49328778

20010 WELD 23,328.7 20010 0.0 11.2 22.49566291 73.49391127

19960 WELD 23,270.7 19960 0.0 11.5 22.49399835 73.49708841

19950 WELD 23,259.6 19950 0.0 11.1 22.49371888 73.49770344

19980 WELD 23,294.3 19980 0.0 11.5 22.49459604 73.49585319

19970 WELD 23,282.3 19970 0.0 12.1 22.49427466 73.49648921

20070 WELD 23,396.1 20070 0.0 4.1 22.49782578 73.49052706

20040 WELD 23,362.9 20040 0.0 10.9 22.49676048 73.49211965

20030 WELD 23,351.2 20030 0.0 11.7 22.49639340 73.49270031

20060 WELD 23,385.1 20060 0.0 10.9 22.49748508 73.49101640

20050 WELD 23,373.8 20050 0.0 11.4 22.49714461 73.49153011


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


20330 WELD 23,696.4 20330 0.0 4.0 22.49391325 73.49453581

20320 WELD 23,685.0 20320 0.0 11.4 22.49443713 73.49400901

20350 WELD 23,711.5 20350 0.0 14.2 22.49314092 73.49519888

20340 WELD 23,700.3 20340 0.0 11.2 22.49337450 73.49505932

20290 WELD 23,645.7 20290 0.0 14.3 22.49630162 73.49196168

20280 WELD 23,631.5 20280 0.0 14.2 22.49677983 73.49144081

20310 WELD 23,673.8 20310 0.0 11.1 22.49506307 73.49333334

20300 WELD 23,660.0 20300 0.0 13.9 22.49570344 73.49263599

20370 WELD 23,739.8 20370 0.0 13.8 22.49197265 73.49633553

20360 WELD 23,725.7 20360 0.0 14.1 22.49261393 73.49569828

20170 WELD 23,500.4 20170 0.0 13.5 22.49959953 73.48807457

20160 WELD 23,488.1 20160 0.0 12.4 22.49955705 73.48811239

20190 WELD 23,524.4 20190 0.0 10.8 22.49950391 73.48825566

20180 WELD 23,513.9 20180 0.0 10.5 22.49960946 73.48808887

20130 WELD 23,453.6 20130 0.0 11.4 22.49911350 73.48864157

20120 WELD 23,442.1 20120 0.0 11.5 22.49888548 73.48893026

20150 WELD 23,476.5 20150 0.0 11.5 22.49943170 73.48825617

20140 WELD 23,464.9 20140 0.0 11.6 22.49928148 73.48843740

20250 WELD 23,594.4 20250 0.0 14.2 22.49808773 73.48995175

20240 WELD 23,583.3 20240 0.0 11.0 22.49848565 73.48946604

20270 WELD 23,619.9 20270 0.0 11.6 22.49722047 73.49095463

20260 WELD 23,608.5 20260 0.0 11.4 22.49771939 73.49036351

20210 WELD 23,547.1 20210 0.0 11.2 22.49925156 73.48855652

20200 WELD 23,535.3 20200 0.0 11.8 22.49938958 73.48839031

20230 WELD 23,569.6 20230 0.0 13.7 22.49877420 73.48912919

20220 WELD 23,558.3 20220 0.0 11.3 22.49902219 73.48883741

20110 WELD 23,430.5 20110 0.0 11.6 22.49863702 73.48924850

20080 WELD 23,400.1 20080 0.0 7.3 22.49814255 73.49007232

20100 WELD 23,418.9 20100 0.0 11.7 22.49836521 73.48960933

20090 WELD 23,407.5 20090 0.0 11.4 22.49820283 73.48988617


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


20500 WELD 23,887.2 20500 0.0 11.5 22.48705617 73.49932181

20490 WELD 23,875.2 20490 0.0 12.0 22.48719003 73.49947935

20520 WELD 23,912.8 20520 0.0 11.4 22.48697234 73.49875168

20510 WELD 23,898.7 20510 0.0 14.1 22.48698695 73.49906850

20460 WELD 23,838.3 20460 0.0 11.4 22.48776533 73.49962589

20450 WELD 23,833.8 20450 0.0 4.5 22.48807938 73.49951357

20480 WELD 23,863.7 20480 0.0 11.5 22.48739504 73.49957360

20470 WELD 23,849.7 20470 0.0 14.0 22.48761258 73.49960882

20580 WELD 23,978.8 20580 0.0 11.5 22.48770359 73.49590445

20570 WELD 23,967.3 20570 0.0 11.5 22.48748494 73.49648284

20600 WELD 24,001.5 20600 0.0 11.7 22.48822808 73.49468051

20590 WELD 23,990.2 20590 0.0 11.2 22.48794731 73.49530741

20540 WELD 23,932.8 20540 0.0 11.5 22.48711848 73.49786299

20530 WELD 23,924.2 20530 0.0 8.5 22.48705153 73.49827826

20560 WELD 23,955.7 20560 0.0 11.6 22.48731134 73.49701366

20550 WELD 23,944.3 20550 0.0 11.4 22.48716577 73.49751903

20440 WELD 23,822.4 20440 0.0 11.4 22.48843989 73.49932750

20410 WELD 23,788.6 20410 0.0 11.3 22.48971102 73.49843274

20400 WELD 23,777.2 20400 0.0 11.4 22.49022279 73.49799321

20430 WELD 23,810.9 20430 0.0 11.5 22.48883266 73.49907728

20420 WELD 23,799.9 20420 0.0 11.0 22.48926034 73.49877350

20390 WELD 23,765.1 20390 0.0 12.1 22.49072994 73.49754444

20380 WELD 23,753.6 20380 0.0 11.5 22.49134570 73.49694272

20660 WELD 24,071.0 20660 0.0 11.7 22.49032791 73.49076813

20650 WELD 24,059.6 20650 0.0 11.4 22.48994487 73.49140130

20670 WELD 24,082.7 20670 0.0 11.8 22.49070345 73.49016883

20620 WELD 24,024.9 20620 0.0 11.6 22.48885014 73.49339265

20610 WELD 24,013.2 20610 0.0 11.7 22.48851689 73.49405634

20640 WELD 24,048.1 20640 0.0 11.5 22.48956658 73.49205961

20630 WELD 24,036.5 20630 0.0 11.6 22.48920152 73.49272280


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


20820 WELD 24,262.2 20820 0.0 11.7 22.49217774 73.48805775

20810 WELD 24,249.0 20810 0.0 13.2 22.49249979 73.48765774

20840 WELD 24,286.4 20840 0.0 12.4 22.49138105 73.48901278

20830 WELD 24,273.9 20830 0.0 12.5 22.49178834 73.48853998

20780 WELD 24,210.4 20780 0.0 13.8 22.49309259 73.48687076

20770 WELD 24,199.2 20770 0.0 11.1 22.49313815 73.48677256

20800 WELD 24,236.6 20800 0.0 12.5 22.49275362 73.48733248

20790 WELD 24,224.2 20790 0.0 12.4 22.49297630 73.48702085

10000005 Valve (Receiver), SV-6 Halol 24,353.7 20890 5.1 5.4 22.48802000 73.49245000

20890 WELD 24,348.6 20890 0.0 10.5 22.48874788 73.49196343

20900 WELD 24,359.1 20900 0.0 - 0.00000000 0.00000000

20860 WELD 24,311.2 20860 0.0 12.6 22.49040678 73.49013699

20850 WELD 24,298.8 20850 0.0 12.4 22.49090391 73.48956729

20880 WELD 24,336.2 20880 0.0 12.5 22.48932248 73.49134697

20870 WELD 24,323.7 20870 0.0 12.4 22.48987977 73.49072975

20760 WELD 24,185.8 20760 0.0 13.4 22.49312562 73.48677620

20680 WELD 24,094.5 20680 0.0 11.3 22.49108798 73.48957919

20740 WELD 24,163.3 20740 0.0 11.2 22.49285024 73.48711475

20730 WELD 24,151.7 20730 0.0 11.6 22.49263191 73.48739587

20750 WELD 24,174.5 20750 0.0 11.4 22.49303091 73.48688920

11000036 WT CHANGE 24,174.4 20750 0.0 0.0 22.49285625 73.48710724 23.80 70000 0.72

20700 WELD 24,117.2 20700 0.0 11.7 22.49179027 73.48855018

20690 WELD 24,105.8 20690 0.0 11.4 22.49145825 73.48903370

20720 WELD 24,140.1 20720 0.0 11.6 22.49239005 73.48772129

20710 WELD 24,128.9 20710 0.0 11.2 22.49209692 73.48811892


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP



TDW Services, Inc.


12000001 End Run Tickle 24,365.3 20900 6.2 - 0.00000000 0.00000000

LOCATIONS 6

GROUPED PITS 0

WT CHANGES 37

MISC 2

GAINS 0

WELDS 2080

DEFORMATION 0

Type Number


(m) Joint #

U/S Weld Dist.



Depth (%)

Length or Pipe

ThicknessWidth or

SMYS


FactorPfail/

MAOP

TDW Services, Inc.



General Inline Inspection TermsGLOSSARY

BURSTPRESSURE

The pressure at which the nominal hoop stress in the wall of a pipe equals the specified minimum yield stress of the pipe grade. It is calculated by 2st/D where s = SMYS, t = nominal wall thickness, D = nominal outside diameter of pipe.

CALIBRATIONDIG An exploratory excavation to compare findings of an in-line inspection system to actual conditions with the purpose of improving data analysis.

BORE RESTRICTION Any reduction of the cross-section of the pipe that may restrict the passage of an ILI pig.

BUCKLE A condition where the pipeline has undergone sufficient plastic deformation to cause permanent wrinkling or deformation of the pipe wall or the pipe's cross section.

CASING ANOMALY When the casing is not welded, or when a gap occurs in the weld, this signature is detected by the tool, and identified with a miscellaneous remark.

CLAMP Non-welded full encirclement pipeline feature not located at a bridge or water crossing, in some cases a type of temporary repair.

COMPONENT Any physical part of the pipeline , other than line pipe, including but not limited to valves, welds, tees, flanges, fitting, taps, branch connections, outlets, supports and anchors.

CHARACTERIZATION The process of quantifying the size, shape, orientation, and location of an anomaly, defect, or critical defect after it has been detected.

CHECK VALVE A valve that prevents reverse flow.

ACCELERO-METERS Part of the INS package of the in-line inspection tool. Each TDW tool contains 3 axis-aligned accelerometers measuring orientation and shock.

ANCHOR,WEIGHT OR

HANGAR

Non-welded full encirclement pipeline features typically evenly spaced across water crossings. These are usually not detrimental unless associated metal loss is detected.

AGM (Aboveground Marker)

A portable device placed at an above ground reference point that both detects and records the passage of an in-line inspection tool. AGMs are typically reported using a marker number followed by the aboveground reference point description of the location device (box) placement.

ABOVE-GROUND REFERENCE POINTS

The above ground reference point is a permanent reference on or above the pipeline, which can be used to locate features in the pipeline. Reference points can be valves, fences, test stations, markers posts, or ther permanent features.

ANOMALY Any kind of imperfection or defect that may be present in the wall of the pipe. This includes coating or welding.

BEND A physical pipe configuration that changes pipeline direction.

BEND RADIUS The radius of the bend in the pipe as related to the pipe diameter (D). Example: A 3-D bend would have a radius of 3 times the diameter of the pipe measured to the centerline of the pipe.

APPURTENANCE A component that is attached to the pipeline; e.g., valve, tee, casing, instrument connection.

ASME B31G, MODIFIED ASME B31G, or

DNV RP-F101

Commonly used analysis criterion for metal loss anomalies in a pipeline. TDW software may use ASME B31G, MODIFIED ASME B31G, or DNV RP-F101 to calculate the safe maximum allowable operating pressure or failure pressure at an area of metal loss. These formulas utilize only length and depth - they do not take into consideration the width of the anomaly. The MODIFIED ASME B31G more closely approximates the values obtained via the RSTRENG calculations, which is less conservative than the standard ASME B31G calculation. See also DNV RP-F101.

General Inline Inspection T

erms

TDW Services, Inc.



General Inline Inspection Terms

Page 2 of 7

DOT192 Part 192 of the Code for Federal Regulations (CFR) Title 49 that addresses Gas Transmission Pipelines.

DOT195 Part 195 of the Code for Federal Regulations (CFR) Title 49 that addresses Transportation of Hazardous Liquids by Pipeline.

DENTS Dents are depressions in the pipeline that may be detected by the inline inspection tool. MFL tools may be able to detect dents, but may not be able to accurately size them.

DETECTIONTHRESHOLD A characteristic dimension or dimensions of an anomaly that must be exceeded to achieve a stated probability of detection.

ERW (Electric-Resistance Weld)

Describes a process used to form steel from a sheet into tubular form (pipe). Welds are formed by resistance heating of two edges of a metal sheet and then forcing them together to create a solid-state weld.

EXPANSION Local increase of pipe diameter during service which indicates the yield stress of the pipe at that location has been surpassed.

ECCENTRICCASINGS

TDW tools detect when a casing is not centered on the pipeline. These casings are referred to as being eccentric. The closer the casing is to the pipeline, the stronger the signal seen by the inspection tool. The tool may not detect if the casing is shorted to the pipe wall. The tool might see evidence of a short, such as metal loss.

ESTIMATED REPAIRFACTOR (ERF) The ratio of pipeline design pressure or in some cases MOP to the safe maximum operating pressure (P’).

CORROSION(Internal)

Metal loss due to chemical or other attack on the steel from liquids on the inside of the pipe. Electrochemical attack can also occur in local cells, but this is less frequent.

DATA ANALYSIS The process through which indications are evaluated to classify, characterize and size them as non-relevant conditions, pipeline components, anomalies, imperfections, or defects.

CONTROL POINT Control points are know locations used to provide coordinate updates to aid the final processing of the inertial data gathered from the instruments onboard the inspection vehicle.

CORROSION(External)

Metal loss due to electrochemical, galvanic, microbiological, or other attack on the pipe due to environmental conditions surrounding the pipe.

DEFECT An anomaly for which an analysis, such as ASME B31G, would indicate that the pipe is approaching failure as the nominal hoop stress approaches the specified minimum yield stress (SMYS).

DEFORMATIONPIG

A pig designed to record conditions such as dents, wrinkles, ovalities, bend radius and angle by making measurements of the inside surface of the pipeline.

DATUM

A datum is a set of reference points on the earth's surface against which position measurements are made. Horizontal datums are used for describing a point on the earth's surface, in latitude and longitude or another coordinate system. While hundreds of reference datums exists some examples of horizontal datums include, NAD27, NAD83, and WGS84. Vertical datums are tidal, based on sea levels referencing geodetic datums such as NAVD88, or geodetic, based on the same ellipsoid models of the earth used for computing horizontal datums.

DNV RP-F101 An analysis procedure that differs from the commonly used ASME B31G criterion. Developed by the Norwegian company Det Norske Veritas, this method is employed for European and Asian pipelines. The DNV algorithm is generally considered to be more conservative than ASME B31G.

GLOSSARY PART 2


erms

TDW Services, Inc.




Page 3 of 7

GLOSSARY PART 3

HALL SENSORS A sensor that directly measures the remaining magnetic field strength not absorbed by the pipe.

HCA (HighConsequence

Area)

A criterion for pipelines designed by the Code of Federal Regulations which define what program and practices operators must use to manage pipeline integrity if the pipeline is located near a commercially navigable waterway, a high population area, or an unusually sensitive area.

GROUPA group is several pits that are grouped together using specific interaction rules. If a pit is a mountain peak, then a group is a mountain range. The reason for groups is so that the overall extent of the metal loss area can be evaluated. Most formulas for calculating the strength of the pipe wall around metal loss look at the overall length of metal loss after interaction rules have been applied to pits.

HALF SOLE A device used to repair a pipeline by welding a small section over half the circumference of the pipe over the defect, literally half of a sleeve.

HIGHRESOLUTION

A term used to describe the function of TDW tools for use in MFL or Deformation analysis schemes. Both MFL and Deformation tools are considered high resolution.

IMPERFECTION An anomaly with dimension and characteristics that do not exceed acceptable limits.

HEAT AFFECTEDZONE (HAZ) The region around a weld which has been metallurgically affected during the welding process.

HEAVYWELD

A girth weld in which the root pass or a portion of the root pass intrudes further than normal into the ID of the pipe. Not usually considered detrimental.

GYROSCOPES(Gyros)

Electronic sensors used to measure change in direction of in-line inspection tool during inspection process. Displayed as pitch and yaw in PIGTRAP.

FITTING A branch connection attached to the pipeline which is smaller than the nominal pipe size that alters flow or diverts product (e.g. tap, offtake, split-tee, weld-o-let, thread-o-let).

GAIN (Metal inClose Proximity)

The inspection tool may detect ferrous metal objects located close to or touching the pipeline. They appear as additional metal added to the pipe and are referred to as gains. Clamps or anchors are considered gains as well as features such as puddle welds or CP connections. Generally, repairs such as patches or sleeves are called out as repairs even though they show appear in the data as gains.

FAILUREPRESSURE

RATIO (FPR)The ratio of the predicted failure pressure calculated by an analysis criterion (e.g. ASME B31G, RSTRENG, etc.) to the MAOP

FEATURE Any physical object detected by an in-line inspection system. Features may be anomalies, components, or some other item.

GOUGE Elongated grooves or cavities caused by mechanical removal of metal.

GPS (GlobalPositioning

System)

The navigational system utilizing satellite technology to provide a user an exact position on the earth's surface. When coupled with known surface locations such as valves and AGMs, an ILI tool’s INS or IMU can approximate or calculate the centerline of a pipeline.

GIRTH WELD A circumferential weld joining two joints of pipe.

GIS Geographic Information System is any system that captures, stores, analyzes, manages, and presents data that are linked to location. GIS is the merging of cartography and database technology.


erms

TDW Services, Inc.




Page 4 of 7

MAOP (MaximumAllowableOperatingPressure)

(or Design Pressure) The maximum internal pressure permitted in the operation of a pipeline as defined by the Code of Federal Regulations.

MAPPING PIG An ILI tool that uses an IMU to collect data that can be analyzed to produce an elevation and plan view of the pipeline route.

LOCATIONA location is a feature in the pipeline that can be used to correlate the inspection tool data to above ground references. Common location features include valves, fitting, flanges, tees, casings, repairs and AGMs. For example, a metal loss area could be referenced as being 200 feet downstream from a valve. Not all locations can be easily found from aboveground.

LATITUDE &LONGITUDE

Latitude is the angular distance north or south from the earth's equator measured through 90 degrees. Longitude is the arc or portion of the earth's equator intersected between the meridian of a given place and the prime meridian and is expressed either in degrees or in time. Latitude and longitude are reported as GPS coordinates. Predicted GPS for features are provided in the Pipeline Listing section.

METAL LOSS Any of a number of types of anomalies in pipe in which metal has been removed from the pipe surface, usually due to corrosion or gouging.

MFL (MagneticFlux Leakage)

An inspection technique in which a magnetic field is applied to a pipe section and measurements are taken of a magnetic flux density at the pipe surface. Changes in measured flux density indicate the presence of a possible defect.

MEASUREMENTTHRESHOLD A characteristic's dimension or dimensions above which anomaly measurements can be made.

MECHANICALDAMAGE

A generic term used to describe combinations of dents gouges, and/or cold work caused by the application of external force. Damage includes coating, movement of metal and high residual stress.

LAUNCHER Refers to the beginning of the inspection; an oversize section of pipe equipped with sealing door through which the inspection tool is loaded into the pipeline.

INDICATION Any measured signal or response from an inspection of a pipe different than the normal baseline signal.

INS (Inertial Navigation

System)Refers to a system of accelerometers and gyroscopes to track the movement and orientation of the inspection tool through bends, turns, etc.

IMU (InertialMeasurement Unit)

Inertial measurement unit, or IMU, is the main component of inertial guidance systems. An IMU works by sensing motion including the type, rate, and direction of that motion using a combination of accelerometers and gyroscopes.

INCLUSION An anomaly in the cross section of the pipeline caused by manufacturing processes. Inclusions may be detrimental if they protrude through the pipe wall. Refer to mill anomaly.

JOINT A single section of pipe that is welded to others to make up a pipeline.

LACK OF FUSION(LOF) In a weld, any area or zone that lacks complete melting and coalescence of a portion of the weld.

INTERACTIONRULES

Specifications that establish spacing criteria between anomalies or defects (pits). If the indications or defects are proximate to one another within the criteria , the anomaly or defect is treated as a single larger unit or group for engineering analysis purposes.

INSPECTION The use of a non-destructive inspection technique.

GLOSSARY PART 4


erms

TDW Services, Inc.




Page 5 of 7

GLOSSARY PART 5

Pfail (Calculatedfailure

pressure)

Calculated maximum operating pressure for the pipeline segment as calculated based on information provided by the Customer. TDW software uses ASME B31G, MODIFIED ASME B31G, or DNV RP-F101 to calculate the failure pressure (Pfail) of the pipeline at a metal loss area for gas lines. The calculation also takes into consideration a temperature factor, for use when the line is at elevated temperature, and a safety factor. The default values used in calculations are a temperature factor of 1, and a safety factor of 100%.

P' (Calculatedsafe maximum

operatingpressure)

Calculated safe maximum operating pressure for the pipeline segment as calculated based on information provided by the Customer. TDW software uses ASME B31G, MODIFIED ASME B31G, or DNV RP-F101 to calculate the safe maximum allowable operating pressure (P') of the pipeline at a metal loss area for liquid lines. The calculation also takes into consideration a temperature factor, for use when the line is at elevated temperature, and a safety factor. The default values used in calculations are a temperature factor of 1, and a safety factor of 72% (80% for Canada).

P

Calculated pressure rating for the pipe. Per ASME B31G, it is the greater of either the established MOP for liquid lines (MAOP for gas lines), or 2stFT/D, where S = SMYS, F = appropriate design factor from ASME B31G, T = Temperature derating factor, D = nominal outside diameter of pipe, and t = nominal wall thickness. See ASME B31G. In application, this variable is identical per DNV RP-F101, however it is calculated using different formulas and factors.

P'/PPercent of maximum established pressure, this is calculated by dividing the calculated safe pressure of the defect (P') by the current established maximum operating pressure of the pipeline (P). For TDW reporting, P is either established MOP provided by the customer or the calculated pressure rating for the pipe (P). Percentages less than 100% are considered pressure-reducing.

PIG A generic term signifying any independent, self-contained device, tool or vehicle that moves through the interior of the pipeline for purposes of inspecting, batching, dimensioning, or cleaning.

PATCH A device used to repair a pipeline by welding a small section of pipe on top of the defect.

Pfail/MAOP Percent of MAOP, this is calculated by dividing the calculated failure pressure of the defect (Pfail) by the current MAOP of the pipeline (P). For TDW reporting, P is either established MAOP provided by the customer or the calculated pressure rating for the pipe (P).

MISALIGNMENT A girth weld anomaly where the two joints of pipe were not aligned properly prior to welding. Sometimes referred to as a hi-lo.

MINIMUMBORE The minimum measured Internal Diameter of the pipe at any particular point. Also referred to as minimum cross-section.

MILLANOMALY

The process of manufacturing pipe can often leave indications in the pipe wall. Typically these anomalies are not detrimental, and are identified for the benefit of the client.

MOP (MaximumOperatingPressure)

The establishhed maximum internal pressure expected during the operation of a pipeline, which cannot normally exceed the maximum allowable operating pressure (MAOP).

OVALITY A condition in which a circular pipe forms into an ellipse, usually as the result of external forces.

ORIENTATION The location of the reference around the circumference of the pipe, as viewed in the direction of flow (downstream). The value is represented in degrees 0-360° rotating clockwise around pipe. (0° = top of pipe, 90° = 3:00)

ODOMETER Wheels on in-line inspection tool, which rotate along the pipe to measure the distance the tool has traveled.


erms

TDW Services, Inc.




Page 6 of 7

GLOSSARY PART 6

SAFETY FACTOR

(or Design Factor) Typically 0.72 for liquid lines per ASME B31G (0.80 in Canada) . In setting the safety factor, due consideration has been given to and allowances made for the manufacturing tolerance and maximum allowable depth of imperfections provided for in the specifications.DNV RP-F101 uses a slightly different Total Usage Factor, which is entered as the Safety Factor in PIGTRAP. The typical 0.72 factor becomes 0.648 when applying the DNV modeling factor of 0.9.

SEAMLESS Pipe that is manufactured by means of extrusion. This process typically creates significantly more variation in pipe wall thickess than ERW pipe.

RESIDUAL DENTDEPTH

The dent depth measured under a particular set of conditions, e.g., in pressurized or un-pressurized pipeline. While maximum dent depth does not change, the residual or measured dent depth changes with pressure and loading. Also referred to as the measured dent depth.

RUPTUREPRESSURE

RATIO (RPR)

The ratio of the predicted failure pressure calculated by an analysis criterion (e.g. ASME B31G, RSTRENG, etc.) to the pressure at specified minimum yield strength (SMYS)

SMFL (Spiral Magnetic Flux Leakage)

A type of MFL tool that creates an oblique, near 45 degree magnetic field within the pipe wall. This allows detection and characterization of long and narrow metal loss or seam features on par with a TFI tool.

SPACER A device used to maintain space between a casing and a pipeline.

SEAM WELD(or SEAM)

The longitudinal or spirally-oriented weld in pipe connecting two edges of a formed plate which was created at the pipe mill.

SLEEVE A device used to repair a pipeline by welding a small section of pipe over the full circumference of the pipe over the top of the defect.

PITLocalized concentrated-cell corrosion on the external or internal surfaces that results from generation of a potential (voltage) difference set up by variations in oxygen concentrations within and outside the pit. The oxygen-starved pit acts as anode and the pipe surface acts as the cathode. If several pits are in close proximity to each other, they may be grouped together using interattion rules as one group.

PLANAR An NDT term indicating a feature has two-dimensional characteristics like a fissure. Sometimes referred to as crack-like.

PIGTRAP Pipeline Inspection Graphical Test Reporting and Analysis Program (PIGTRAP). Proprietary software developed by TDW Inc. for viewing data collected by the inspection tool.

PIPE SUPPORT Any device used to support an aboveground pipeline.

RECEIVER Refers to the ending of the inspection; an oversize section of pipe equipped with sealing door through which the inspection tool is retrieved from the pipeline.

REPORTINGTHRESHOLD

A parameter that defines whether or not an anomaly will be reported. The parameter may be a limiting value on the depth, width, or length of the anomaly or feature.

RSTRENG A computer program designed to calculate the calculated safe maximum operating pressure (P') of corroded pipe. RSTRENG results are approximated when Modified B31G criteria is used.

REBOUNDING The process of changing the dent depth and shape by internal pressure in the pipe. Generally, dents due to third-party contact will re-round, while dents due to rocks will not unless the rock causing the dent is removed.


erms

TDW Services, Inc.




Page 7 of 7

GLOSSARY PART 7

VOLUMETRIC A term indicating a feature has three-dimensional characteristic similar to a typical corrosion pit.

TRAP Pipeline facility for launching and receiving tools and pigs.

WELD ANOMALY Any area or zone in a weld that lacks complete melting and fusion of a portion of the weld which could have occurred during the welding process or caused by corrosion.

WRINKLE BEND A field bend that contains smooth and localized bulges on the inner radius of the bend, sometimes formed when pipe is cold bent.

WRINKLE A smooth and localized bulge visible on the outside wall of the pipe.

STITCHING Intermittent or repeating lack of fusion in a seam weld.

SMYS (SpecifiedMinimum Yield

Strength

A required strength level that measured yield stress of a pipe material must exceed, which is reported as pipe grade. The measured yield stress is the tensile stress required to produce a total elongation of 0.5 percent of a gage length as determined by an extensometer during a tensile test.

TEMPERATUREFACTOR Typically 1.0 unless the metal temperature is expected to exceed a normal temperature range of -20°F (-30°C) to 250°F (120°C).

TRACKING The process used to monitor the progress of the inspection tool through the pipeline. AGM boxes are placed at aboveground marker reference locations to record the passage of the inspection tool.

THIRD PARTYDAMAGE Damage to a pipeline system by an outside party. See mechanical damage.


erms



TDW Services, Inc.

Appendix A

Page 1 of 1

4. For dig sheet creation, please refer to Appendix C.

5. TDW inspection tools are designed to detect various features and anomalies within a pipeline. These various features and anomalies are added to the database using PigTrap™ software by qualified Data Analysts.

6. Database Numbering System: All entries in the database have a unique number assigned to them. The table below lists the number range of each category of database records.

1. The Graphs, Dig Sheets, and Tables used in this report were generated using a standalone reporting engine from data contained in a Microsoft Access™ database.

2. If the end user has Microsoft™Access on their computer, they have complete access to the inspection database. The database file which has an extension of *.mdb (Microsoft™ database) is stored in the same directory as the tool data. Although the printed reports and report spreadsheet were generated by a standalone reporting engine, using Access the user can customize some basic graphs or tables contained in the database. Alternatively, the data can be exported to a spreadsheet if preferred.

3. The PigTrap™ software, included with this report, provides the user with an easy way to view the data collected by the TDW in-line inspection tool and can also be helpful when trying to locate certain features or specific sections of pipe. The software can be run off various media or installed onto a network or hard drive. Please refer to Appendix B for installation requirements and instructions.

Pits or Other Defects 20,000,000 to 39,999,999

Bore Restrictions 15,000,000 to 15,999,999

Deformations 14,000,000 to 14,999,999

Groups (of Pits) 40,000,000 to 49,999,999

8. All other records are incremented by 1 from one record to the next. For example, the first Location record would be numbered 10,000,000, the second record would be 10,000,001, and the third record would be 10,000,002, etc. Depending on information sent out previous to the final report, numbering may change during analysis of the run.

Seam Welds 51,000,000 to 51,999,999

Welds 110 to 9,999,999

7. All records are numbered sequentially from the beginning of the pipeline section to the end of the pipeline section. By default Welds begin at 110 and are incremented by 10 from one weld to the next. This can be altered to match customer weld or joint numbering by request.

Locations 10,000,000 to 10,999,999

Gains 13,000,000 to 13,999,999

Misc 12,000,000 to 12,999,999

Pipe 11,000,000 to 11,999,999

Database and Reporting Details

Appendix A



TDW Services, Inc.

Appendix B

2. Access the Setup.exe program located on the CD or DVD. This can be done by browsing to your computer’s CD/DVD drive and double clicking Setup.exe. This will launch the Data Installer program.

3. Click Next to continue installing the run data.

Note: If you want to install only the Pigtrap™ software and not the run data (advanced users only), choose Cancel and go to the Pigtrap™ Installation steps on page 3.

The inspection report will be accompanied by either CDs, DVDs, or an external drive containing all files necessary for installation. Installation for CDs and DVDs differs from external drives, if an external drive accompanied your final report please skip to PigTrap™ Installation.

Run Data and PigTrap™ Installation

1. Insert Disk 1 from the report binder into your computer’s CD/DVD drive.

CDs and DVDs

• Microsoft® Report Viewer 2008 SP1• Microsoft® Visual C++ 2008 SP1 Redistributable Package (x86)

• Microsoft® Access 2003 or higher• Microsoft® .NET Framework 3.5 Service pack 1

What electronic data accompanied the inspection report

• Spreadsheet – .XLS (Microsoft Excel) A Pipeline Listing is generated for your run in an Excel spreadsheet format. Each event at a particular location is identified and described. You may use Copy and Paste techniques to build your own custom formatted report.

• Setup.exe file – This file executes the installation of the data for the specific run contained on the disk(s) or external drive.

• .rsf – This is a PigTrap™ reference file which holds specific settings for the run to be viewed.

The CD, DVD, or external drive supplied by T.D. Williamson, Inc. for this PigTrap™ inspection of your pipeline contains the following types of files. For CD or DVDs the first disk will contain these files while accompanying disks (if any) contain raw tool data only. External drives will contain this information in the Final Report folder on the external drive under the run name folder.

• Database – .MBD (Microsoft Data Base) Files of this type may be viewed through Microsoft Access. This file contains the analysis of the inspection.

Before you install and run PigTrap™ please verify that the computer you are installing to meets the minimum requirements needed to successfully open and operate PigTrap™.

Windows OS

System Requirements

The PigTrap™ software allows the user to view all of the data collected during the Magpie/TDW inline inspection survey. Installation requires the disk(s) or external drive that accompany the inspection report.

• Microsoft® Windows 7, Vista®; Windows® XP Professional, Home Edition

• 1 GB available hard drive space plus additional necessary for the run size.• Qualified hardware-accelerated OpenGL graphics card, 32-bit color, and 256MB of

VRAM (latest manufacturer drivers strongly recommended also).

• 2 GB RAM or more

o Administrator rights required• 2.0 GHz Intel® Core™ 2 Duo Processor or higher

• h*.nnn, c*.nnn, i*.nnn, p*.nnn, t*.nnn, l*.nnn & o*.nnn – The raw tool data created on-board the inspection tool. These files are necessary for PigTrap™ to function properly. CD and DVDs have the option to install these files onto your computer, if chosen not to install them to your computer the disks must be used to view the run.

Installation Instructions for PigTrap™ Pipeline Inspection Graphical Test/Report Analysis Program

Appendix B



TDW Services, Inc.

Appendix B

Page 2 of 8

9. Click Done to complete the run data installation.

10. After clicking Done in the Data Installer PigTrap™ Installation will automatically launch.

7. The following progress bar will appear. There may be a short delay while the database is being copied. Be patient, this is normal.

8. You may be prompted to insert other disks from the run distribution if data was supplied on more than one disk. Insert the required disk and click OK to continue. Repeat until all disks have been copied.

6. If the installation folder does not already exist, then you will be prompted to create it. Click Yes to create the new folder.

4. Choose the type of install you would like to perform: Full Install (recommended) or Minimal Install. The size of the installation is shown next to each type of installation. The database file must be installed for PigTrap™ to operate properly, but you may choose to not install the raw data. If you choose to not install all the data, you may need to change disks while viewing the data in PigTrap™. Click Next to continue after making your choice.

5. Choose the installation location on your computer for the data files. The default and recommended location is C:\Magpie\Software. The location inside this folder is based on the trap date, name, and size of the run. If you would like to specify another location, click the Browse... button. Click Finish to continue.

Appendix B



TDW Services, Inc.

Appendix B

Page 3 of 8

3. PigTrap™ Setup Wizard will launch. This will guide you through the installation of PigTrap™. Click Next to continue.

4. The Software License Agreement will appear. Read the agreement select I Agree to continue. You must accept the agreement to install PigTrap™.

Note: CD and DVDs follow a slightly different installation process. Steps 1 and 2 are for external drives, if you are installing from CDs or DVDs please skip to step 3.

PigTrap™ Installation

2. Access the PigTrap™ setup.exe located on the external drive. This can be done by browsing to external drive and double clicking PigTrap™ setup.exe.

1. Plug the external drive into your computer.

7. When prompted whether you would like to view the run data, click Yes to launch PigTrap™. Shortcuts are now on the desktop to the run and to PigTrap™. Once PigTrap™ opens with the data, choose save in the upper left of the data view.

5. Choose the installation location on your computer for the PigTrap™ software. The default and recommended location is C:\Magpie\Software. Click Install to continue.

6. The following progress bar will appear while PigTrap™ installs all the necessary files. Once the installation has completed click Finish to close the wizard.

Appendix B



TDW Services, Inc.

Appendix B

Page 4 of 8

We packed so much into the new PigTrap™ the older reference files just couldn’t hold it all so a new one may need to be created. Once the new reference file finishes, you will be able to freely navigate around in PigTrap™.

The data viewed in PigTrap™ is a 360 degree snapshot of the inside of the inspected pipe. This captured data is sliced down the middle and laid flat in the PigTrap™ main display. The horizontal lines represent sensor data collected from the pigging tool. Each line is one sensor. The left side of the screen is ''upstream'' while the right side of the screen is ''downstream''. So, as you scroll from left to right you are moving downstream from the launch valve.

What am I looking at?

1. Double click on PigTrap™ .exe icon. Click on the Open Folder icon , then browse to the installed inspection data folder and select the desired .rsf or .mrsf file.

Viewing the inspection data in PigTrap™ can be done by using one of three different methods.

Opening and Viewing the Inspection Data

PigTrap™ was designed so you would have the ability to review previous TDW/Magpie inspection data when needed. However, you may need to acquire an updated Microsoft Access Data-base from one of our TDW representatives. When opening previous data in PigTrap™ you may encounter the message, ''Your database is very old. You may need to update it.'' If this happens, don't panic. Chances are you will be able to view the data without any problems. If you can't, just contact your TDW representative and we can send you a newer database and walk you through the process of updating.

3. Drag and drop a run settings file (.rsf or .mrsf) on top of the PigTrap™ .exe file.

2. Double click on a run settings file (.rsf or .mrsf) that is associated with PigTrap™.

For additional information regarding dig/feature sheet creation, see Appendix C.

For example: Launch and Receive Valves can be found under ''location'' button, you’ll also find Bends, Tees, Markers, etc.

An interactive training is also available from the Help menu . This provides de-tailed information about PigTrap™ and its features. Please contact your TDW representative if you would like some additional training.

Training

Click on the binoculars to open the Database/Search Edit (DSE). This displays a table of the pipe objects marked by the Data Analysis personnel. The buttons in the DSE allow for a high level filtering of specific types of marked pipe objects in the table. Right click on any pipe object to display a context menu of filtering, resize columns/rows and generate dig/feature sheets.

The horizontal scrollbar at the bottom of the main view moves the view upstream or downstream. Clicking on the left arrow moves upstream while clicking on the right arrow moves downstream.

Basic Navigation

Select the ''Jump to Distance'' icon from the run toolbar to enter a desired distance point to navigate in the inspection data. The option ''View Width'' sets how much viewable area to display (time based).

Zooming IN/OUT on the data is easily performed by clicking on the Zoom buttons.

The vertical scrollbar at the right side of the main view rolls the data vertically to a desired orientation of the view.

Appendix B



TDW Services, Inc.

Appendix B

Page 5 of 8

Sensors are not enabled. Turn on the sensors from the Run Toolbar.

Can't see the sensor data.Zoomed in very close. Click on the Zoom OUT button.

REF error message.If this is the first time opening a run with PigTrap™ , it may attempt to create a reference file (.ref2). This message appears because a .ref2 file does not exist or it is corrupt.

Select OK to create a new ref2 file.

Can't find the Status/Database Window.

The Status/Database windows are not enabled Go to View>Status Window and toggle the option ON

Microsoft Visual C++2010 redistributable is corrupt or not installed.

This is typically installed the TDW Inspection data. It is possible to have a corrupt install and additional help may be required to correct the issue. Please contact your local IT department to assist with the prerequisite install.

Crashes while opening. The .rsf is corrupt and needs replacing. Reinstall the inspection data.

The video card drivers are out of date.Update the graphic card drivers. Note: Before installing the latest driver, you may need to uninstall the current drivers while in Windows safe mode. Can also turn off shaders.

''Data files missing'' message displayed on the Main view.

PigTrap™ is not able to load the necessary data file(s) because they are missing, not installed correctly, media/hardware damage (Dirty or scratched CD/DVD, drive failure).

Please reinstall the inspection data, check the run setting has the correct path to the files (Run Settings>Files>Data File Directory), clean the CD/DVD.

Issue Possible Cause Possible Solution

Trouble Shooting

''Generate Dig Sheet'' is not available from the DSE.

PigTrap™ is not installed correctly. Please reinstall PigTrap™.

One of the task specific modes is enabled. Press the ''Done'' or ''Cancel'' buttons from the bottom left.

Not able to highlight pipe objects.The color bit depth is not set correctly. PigTrap™ requires a 32 bit color depth, please contact IT to assist

in changing to the correct setting.

Main window title bar is not visible. Full screen is enabled. Press ''F11'' on the keyboard.

Appendix B



TDW Services, Inc.

Appendix B

Page 6 of 8

Toolbar Layout and Functions

Appendix B



TDW Services, Inc.

Appendix B

Page 7 of 8

PigTrap™ for MFL Runs

Appendix B



TDW Services, Inc.

Appendix B

Page 8 of 8

PigTrap™ DEF Runs

Appendix B



TDW Services, Inc.

Appendix C

Page 1 of 1

a. This will bring up the Database Search/Edit (DSE) window.

3. You can choose what type of feature you want to list in the window by clicking on the icon in the margin.

1. Open PigTrap™ to view the inspection data for the run. Please consult Appendix B if you need instructions on installing and viewing the raw data.

2. Click on the Database Search/Edit option either by clicking on the small binoculars icon in the toolbar or choosing the option under the Seek toolbar.

b. Generate Dig Sheet From Table – This will create a separate dig sheet for every item in the list whether highlighted or not. Note that if the list contains a lot of features, this could lead to numerous dig sheets being created and may impact the short term performance of your computer while they are being generated.

a. Generate Dig Sheet From Selection – This will create a separate dig sheet for each of the highlighted rows in the list. Using the Ctrl key or the Shift key and clicking rows will allow for multiple row selection.

6. The dig sheets you requested will automatically be previewed for easier printing as well as saved to a directory as a pdf file for printing later.

7. Also under the Dig Sheets toolbar in the DSE window, you may change various dig sheet formatting preferences by clicking on Dig Sheet Settings option.

a. To choose which directory the dig sheets are saved into, choose Report Creation Settings under the Dig Sheets option in the top toolbar.

a. Clicking on the header of the column will sort either ascending or descending. Click again to reverse the order.

4. Once the list populates with that type of object, you can filter or sort the data to find the object(s) for which you want to create dig sheets.

b. You may also use or create various filters by clicking on one of the two Filters buttons.

5. Right clicking in the table or choosing the Dig Sheets option in the top toolbar will allow you to create dig sheets one of two ways:

c. There is also a Displayed Columns button which allows you to hide or show the various columns of data.

The user can view and print dig sheets for any anomaly or feature detected in the pipeline including Metal Loss (Groups or Pits), Dents, Locations, Gains, Wall Thickness changes, Welds, Miscellaneous notes, etc.

Printing Dig Sheet Reports Instructions

Appendix C

egp report

Documents