* USA 4,757,712; 4,949,263; 5,285,020, CANADA 1302566; 1304479; AUSTRALIA 598,376, 605,647 EU 0293697; 0351453

ED2 SkidWeigh Series

The ED2 SkidWeigh Series system is general application, compact, heavy duty, fully automatic microprocessor electronic device that measures the load weight / raw operational data on any type of material handling vehicle regardless of the vehicle make, model, operating voltage or lifting capacity.

Lift Truck Utilization Through Real-time Vehicle Usage Measurement

All of the VMS systems on the market compare lift truck utilization across the enterprise based on historical data (ignition time on, lift time, pallets stored, etc.) which in most of the cases is irrelevant to increase performance of the operator. In order to produce positive bottom line results with little upfront investment and relatively short payback you must manage the operation at a lower level and report productivity results in terms of vehicle utilization measured in real-time on an individual basis.Measuring performance against standard utilization factor that utilizes a measurements of the raw data in real-time (Driving loaded / unloaded, standing loaded /unloaded, lift time, minimum load weight, number of loads, etc.) is the key to improve the bottom line immediately.With worldwide *Patented Technology, “Material Handling Vehicle Monitoring System” you can increase your vehicle utilization starting with the minimum investment with the installation of the single unit to one of your vehicle. The lift truck operators are constantly remained with real-time information of under utilization event in a visual and/or audible form.The result will be sustainable improvements in operator performance and lift truck utilization.

* USA 4,757,712; 4,949,263; 5,285,020, CANADA 1302566; 1304479; AUSTRALIA 598,376, 605,647 EU 0293697; 0351453

STANDARD PRODUCT SPECIFICATIONS

COMPACT SIZE & HEAVY DUTY - DESIGNED FOR MATERIAL HANDLING VEHICLE

INTEGRATED VISUAL DATA TECHNOLOGY INC. 3439 Whilabout Terrace, Oakville, Ontario, L6L 0A7 Canada Phone: 905-469-0985 Fax: 905-825-9494

For your specific application please call 289-242-0995 or send an e-mail to sales@ivdt.ca

Clear cover, impact resistant

Compact PC board

Liquid tight fitting for

external cable

Universal power supply input from

12 to 55 V DC

Front cover with seamless foam-in-place gasket

assures watertight and dust-tight seal

Large six LED digits

display

Technical Data

- Voltage from 12 to 55 V DC

- Operating current 60mA

- Technology, micro controller

- RS-232 port

- Readout type, large six LED digits

- Bright red display intensity

- Enclosure ABS, 120 x 80 x 55 mm

- Weight, 0.6kg

- Operating temperature -40 C to + 70 C

- Pressure Transducer (Swiss Made)

- Port connection, male 1/4”-18 NPT

- Built in pressure snubber

- NEMA 4X protection

- Reverse polarity protection

- Over voltage protection

- Short circuit protection

- Housing material, Stainless steel AISI 303

- Weight 95 grams

- Installation, unrestricted

- Two buttons system automatic calibration

- Check weighing accuracy, +/- 0.1 to 1% of

vehicle lifting capacity

- Weighing range up to 50000 lb or kg

- Single weighing channel

- Lift-n-weigh load weighing procedure

- Graduation 1, 5 and 10 (default 5)

Optional Features

- Two independent weighing channels

- Total load weight

- On-board printers

- Under utilization monitoring & reporting

- Overload visual warning & reporting

- Impact detection visual warning

- Engine idling monitoring

- Safety check monitoring & reporting

- Load monitoring in % of lift capacity

- Automatic zero weight re-calibration

- Wireless web based reports

- Enfora modem, FCC ID: MIVGSM0408

- Relay, SPST for external warning