Download - sisis brochure_0811_export
World-class turf maintenance equipment
designer & manufacturer of natural and artificial
turf maintenance machinery since 1932
Export Catalogue
For over 80 years SISIS has been designing
and manufacturing exceptionally dependable,
durable maintenance equipment for sports
and amenity turf and artificial surfaces
Tractor mounted deep slitters 4
Powered slitters 5
Tractor mounted aerators 6
Powered aerators 8
Powered scarifiers 10
Tractor mounted scarifiers 13
Tractor mounted sweepers 14
Spreaders and top dressers 15
Seeders 17
Combination implement frames 18
Towed implement frames 20
Tractor mounted powered brushes 20
Tractor mounted brushes 21
Ride on brushes 22
Line markers 23
Rollers 23
Dragmats 24
Hand operated equipment 24
Welcome to the SISIS catalogue
Creating the perfect looking turf is the ultimate aim of every groundsman,
greenkeeper and gardener the world over. Whether in preparation for a
prestigious event at a national stadium or a leisurely Sunday afternoon at
the local sports club, your turfs appearance is everyone’s first impression.
The team at SISIS shares your pride in creating the best. That’s why we are
so passionate about the products we design, make and test at our factory.
Every machine is hand built by experienced engineers, drawing on a long
tradition of quality manufacturing and using only the best most reliable
materials and components.
Together with the support of our professional dealership network we
believe you invest in more than an established marque of quality, but
gain throughout the whole machine life cycle with a higher level of advice
and education, access to technical support and when required efficient
responsive parts and servicing.
Team SISIS look forward to supporting every step you take towards
achieving the ultimate result.
designer & manufacturer of natural and artificial turf maintenance machinery since 1932
Football Hockey Rugby Cricket Bowls Croquet Tennis Golf Amenity Artificial
Tractor mounted deep slitters Tractor mounted deep slitters
Powered slitters
Megaslit
Maxislit
Deep slitting aerators give deep, clean penetration with minimal surface disturbance.
Deep slitting aerators give deep, clean penetration with minimal surface disturbance.
• Choice of interchangeable slitting tines to suit different ground conditions. • The angle of the tines and spiral design of tine shaft assist penetration giving
maximum underground cultivation with minimum surface disturbance. • Tine plates have a wide rim to reduce marking in soft or undulating conditions.• Safety guard is quickly removed for easy tine change.• Standard cat.1, 3-point linkage. • Simple design for low maintenance.• Requires minimum 40 hp unit
Option
Floating rear roller.
• Choice of interchangeable slitting tines to suit different ground conditions. • The angle of the tines and spiral design of tine shaft assist penetration giving
maximum underground cultivation with minimum surface disturbance. • Tine plates have a wide rim to reduce marking in soft or undulating conditions. • Safety guard is quickly removed for easy tine change. • Standard cat.1, 3-point linkage. • Simple design for low maintenance.• Requires minimum 25-35 hp unit
Description Code Order ref
2.5m wide deep slitter MG/240 FS0717includes 32 x F35602 tines
Optional roller MG/240PR FS1097
Description Code Order ref
1.8m wide deep slitter MX/160 FS0634includes 32 x F34842 tines and roller
5 4 FULL SPECIFICATION AVAILABLE ON www.sisis.com FULL SPECIFICATION AVAILABLE ON www.sisis.com
Sports Fields
Sports Fields
Golf
Golf
Amenity
Amenity
Multislit
Autoslit
Deep slitting aerators give deep, clean penetration with minimal surface disturbance.
Deep slitter suitable for use on fine or outfield turf. Deep clean slitting action with minimal surface marking.
• Choice of interchangeable slitting tines to suit different ground conditions.• The angle of the tines and spiral design of tine shaft assist penetration giving
maximum underground cultivation with minimum surface disturbance.• Tine plates have a wide rim to reduce marking in soft or undulating conditions.• Standard cat.1, 3-point linkage. • Simple design for low maintenance.• Can be used with most trucksters by use of a Variable Pressure Frame.• Requires minimum 15-25 hp unit
Option
Weights (weight bar will accept max 10, 25kg weights ref. F33150).
• Choice of interchangeable slitting tines to suit different ground conditions.• The angle of the tines and spiral design of tine shaft assist penetration giving
maximum underground cultivation with minimum surface disturbance.• Tine plates have a wide rim to reduce marking in soft or undulating conditions.• Safety guard is quickly removed for easy tine change.• For ease of use, and to comply with EU lifting regulations, the patented design
uses a cantilever system to lift the machine out of work.• Incorporates rear smoothing roller.
Description Code Order ref
1.5m wide deep slitter MS/1500 FS1173includes 40 x D6951 tines
Optional tines (40/unit) 152mm heavy duty D7493
152mm sharpened D6951
203mm sharpened D6998
Description Code Order ref
6.5hp deep slitting aerator AS/1000 FS0819includes 24 x D6951 tines
Optional tines (24 per unit)152mm heavy duty D7493
152mm fine turf D6951
Sports Fields
Sports Fields
Golf
Golf
Amenity
Amenity
Tractor mounted Aerators Tractor mounted Aerators
Multitiner 1.8m Mounted Rolaspike
Multitiner 1.2m
Javelin Aer-Aid 1500
Tractor mounted drum-type aerator for use on fine turf.
Tractor mounted Sarel type roller.
Tractor mounted drum-type aerator for use on fine turf. Also suitable for use on outfield turf such as soccer pitches.
Vertical action, air-injection aerator for fine and outfield turf.
• Three drums with independent rotation.• Choice of interchangeable tines with a maximum working depth of 100mm (4ins).• Quick release pins and clips for rapid tine change.• Standard cat. 1, 3-point linkage for use on most compact tractors.• Simple design for low maintenance.• Guards are easily removed.• Roller, fitted as standard can be used for extra weight in hard conditions.• Tractor power requirement - 30hp minimum.
• 180cm wide Sarel type roller.• Working depth of up to 50mm.• Three rotating drums on one shaft.• Fast forward speed for excellent productivity.• Can be fitted to the SISIS Single Play, Twin Play, Quadraplay for fitting to the
tractor 3 point linkage.• Tractor power requirement - 30hp minimum.
• Choice of interchangeable tines Max working depth of 100mm (4 ins).• Quick-release pins and clips for rapid tine change Integral weight bar for additional
weights if required.• Rear spring-loaded pressure roller fitted as standard Standard cat.1.• 3-point linkage for use on most compact tractors.• Can also be adapted to fit most trucksters. • Simple design for low maintenance.• Tractor power requirement - 30hp minimum.
Option
Swath boards (for use with hollow tines only).
• Minimal Surface Disturbance Depth is infinitely variable to a maximum of 127mm (5ins).
• Quick, single-lever depth setting for easy adjustment.• Cam trigger mechanism ensures that the air is always expelled at
the bottom of the tine penetration, enabling treatment to be targeted precisely and consistently.
• Working at 75mm (3ins) spacing, air is introduced at a rate of 88 litres (3cu.ft.) per minute.
• The air injection tines are specially designed to use the maximum air available from the compressor which produces clean, fresh air at a constant rate.
• Tipped tines for extra durability.• Alternative tines for other operations such as hollow coring prior to top
dressing.• Wide working width.• Fast forward speed for excellent productivity.• Minimal maintenance – all bearings fully sealed and no grease
nipples in the drive system.• Quiet in operation.• Quality British made Compair compressor.• Tractor power requirement - 30hp minimum.
Options
Rear pressure rollers
Description Code Order ref
1.8m wide drum aerator (less tines) MT/180 FS1179includes roller
Optional tines - set of 120 100mm solid tine HS D6728
100mm chisel tine OSH D2109
76mm hollow tine HO D2048
115mm Jumbo hollow tine F35967
76mm pencil tine SL D2047
Description Code Order ref
1.8m wide drum Rolaspike RS/180 FS1169(requires Single Play frame)
Single play frame SP FS0870
Description Code Order ref
1.2m wide drum aerator (less tines) MT/4 FS0546
Optional tines - set of 96 100mm solid tine HS D6728
100mm chisel tine OSH D2109
76mm hollow tine HO D2048
115mm Jumbo hollow tine F35967
76mm pencil tine SL D2047
Description Code Order ref
1.5m wide vertical action air injection JV/1500/AA FS1066aerator (includes set of air/non air tines)
Special tines (set of 10 tines) 127 x 10mm ‘air tines’ F36948
127 x 10mm ‘non air tines’ F36949
Optional rear pressure roller FS1115
Optional turf retainers FS1009
Optional tines (20 or 30 per set)
127mm solid tine set of 20 F31730 set of 30
127 x 7mm pencil tine set of 20 F33965 set of 30
127 x 16mm hollow tine set of 20 F31277 set of 30
114mm Jumbo hollow tine set of 20 F35967 set of 30
100 x 12.5mm hollow tine set of 20 F36447 set of 30
Sports Fields
Sports Fields
Sports FieldsSports Fields
Golf
Golf
GolfGolf
Amenity
Amenity
AmenityAmenity
76 FULL SPECIFICATION AVAILABLE ON www.sisis.com FULL SPECIFICATION AVAILABLE ON www.sisis.com
Powered Aerators Powered Aerators
Arrow Aer-Aid Supaturfman
Dart
Arrow
Independently powered vertical-action air-injection aerator.
Independently powered, heavy duty aerator for bowling greens, tennis courts, cricket squares etc.
Independently powered vertical action aerator for bowling greens, tennis courts, cricket squares etc.
Powered, vertical-action aerator.
• Working width 600mm.• Wide range of interchangeable tines.• Up to 12.5cm (5ins) working depth.• Variable tine spacing.• Minimal surface disturbance.• Powerful 13hp engine.• Assisted lift for easy operation.• Independent disengagement of tine drive.• Vibration reducing handles.• Quality British made Compair compressor.
Option
Optional tines see Arrow.
• 100mm depth with minimal surface disturbance.• Working depth of 10cm (4 ins) max.• Choice of interchangeable tines.• Pivoted tine bar for vertical penetration and withdrawal
without surface disturbance.• 6.5hp engine.• Will also operate on spiker-slitter.• Supplied with transport trolley.
Option
Spiker-slitter ref. SS/3T width 90cm (35 ins).
• Working depth of 100mm (4 ins) max.• Wide range of interchangeable tines. • Clean, vertical penetration and withdrawal without
surface disturbance.• All controls, including balanced depth control, adjust-
able from operating position.• “Easy lift” system for effortless turning and transport• Designed for ease of handling.• Minimal maintenance with sealed bearings and easily
removed cover.• Effortless depth selection with clearly visible indicator.• 100mm depth with minimal surface disturbance.
Option
Swath Board
• Working width 600mm.• Wide range of interchangeable tines.• Up to 12.5cm (5ins) working depth.• Variable tine spacing.• Minimal surface disturbance.• Powerful 10hp engine.• Assisted lift for easy operation.• Independent disengagement of tine drive.• Vibration reducing handles.• Complies with all EU safety regulations.
Description Code Order ref
60cm wide independently powered ARW/AA FS1178vertical action air injection aerator
Special tines (set of 4 tines) 127 x 10mm ‘air tines’ F36948
127 x 10mm ‘non air tines’ F36949
Optional Arrow Aer-Aid tines are listed below as Arrow
Description Code Order ref
6.5hp drum type aerator. Less tines SMA/444/2/6 FS0637Includes transport trolley
Q/R tines (set of 32 tines) 100mm solid tine F34682
100mm pencil tine F35079
100mm hollow coring tine F34984
100mm chisel tine F35078
114mm Jumbo coring tine F35077
0.9m spiker slitter attachment SS/3T FS0312
Description Code Order ref
6.5hp vertical action aerator. Less tines DRT/42 FS1108
Tines (set of 8 tines) 100mm solid tine HS D6728
100mm pencil tine F34257
100mm hollow coring tine OGH D2107
100mm chisel tine OSH D2109
100 x 10mm hollow tine F36447
Optional Swath Board FS1117
Description Code Order ref
60cm wide heavy duty, vertical action ARW/60 FS1129aerator. Less tines
Optional tines (8 or 12 per set) for both Arrow and Arrow AerAid
127mm solid tine set of 8 F31730 set of 12
127 x 7mm pencil tine set of 8 F33965 set of 12
127 x 16mm hollow tine set of 8 F31277 set of 12
114 x 22mm Jumbo hollow tine set of 8 F35967 set of 12
100 x 12.5mm hollow tines set of 8 F36447 set of 12
100mm chisel tine set of 8 D2109 set of 12
98 FULL SPECIFICATION AVAILABLE ON www.sisis.com FULL SPECIFICATION AVAILABLE ON www.sisis.com
Sports Fields
Sport
Sports Fields
Golf
Golf
Golf
Amenity
Amenity
Amenity
Sport Golf Amenity
Powered Scarifiers Powered Scarifiers
Auto Rotorake Mk.5 Rotorake 450Heavy duty scarifier for removal and control of thatch on fine and other quality turf.
Scarifier with power to the reel and assisted drive to the rear tyres, for removal and control of thatch on fine turf.
• Working width of 50cm (20ins).• Cutting reel safety brake.• Contra-rotating reel with specially designed tipped blades for clean,
consistent cut and maximum thatch removal.• Alternative blades for light scarifying.• Optional Brush Reels, Rolaspike Reel.• Depth of cut adjustment control is mounted on the handle to enable
depth to be set whilst moving forwards.• User-friendly, operator presence controls designed for maximum
operator safety.• Easy-fit collector box.• 6.5hp petrol engine with independent drive to wheels and reel.• Careful weight distribution, slick tyres and full differential ensure
ease of turning and minimal surface marking.• Optional artifical surface Brush Reels.
• Working width of 46cm (18 ins).• Contra-rotating reel with blades spaced at 1.8cm (3/4in) for clean,
consistent cut.• Choice of reels for year-round use.• O.P.C. controls for operator safety.• Depth of cut adjustment control is mounted on the handle to enable
depth to be set whilst moving forwards.• Collector box.• 4hp petrol engine.• Optional artifical surface Brush Reels.
Description Code Order ref
50cm wide powered scarifier. 24 tungsten blades & collection box.Honda engine FS1052
Optional complete reels (ARR/5 only) 50cm thatch removal reel with ARR/5TR FS109337 x 1.6mm tipped ‘hook’ blades
50cm light scarifying reel with ARR5/LRS FS109837 x 1mm tungsten tipped blades
50cm thatch control reel with ARR5/TCR FS109526 x 4926 blades
50cm wide spiral brush reel ARR/5BR FS1088
50cm wide synthetic brush reel ARR/5SSR FS1090
50cm wide Rolaspike reel ARR/5RS FS1113
Description Code Order ref
45cm wide scarifier. Fitted with thatch RR450 FS1130removal reel & collection box.
Optional complete reels (also suitable for ARR4 and STR/18/2) Thatch removal reel (RR450) 450/TRR FS1161
Brush reel ARR/BR FS0818
Verticut reel ARR/RRT FS0292
Thatch control reel ST/TCR FS087/09
Tri-tipped Reel FS1185
Rolaspike reel 450/RS FS1160
Synthetic brush reel ARR/SBR FS0867
1110 FULL SPECIFICATION AVAILABLE ON www.sisis.com FULL SPECIFICATION AVAILABLE ON www.sisis.com
Sport
Sport
Golf
Golf
Amenity
Amenity
Synthetic
Synthetic
Powered Scarifiers Tractor Mounted Scarifiers
Rotorake 602 & 602S Veemo Mk2
Rotorake TM1000
Reels for existing SISIS Rotorake Mk3/Mk4 and Trio Rotorake (STR18/2)
Heavy Duty Powered Scarifier, de-thatcher and Linear Aerator. Seeder option available.
A purpose designed, heavy duty scarifier using strong cutting blades for maximum thatch removal with minimum surface disturbance.
Combined de-thatcher and Linear Aerator with collection.
• Working depth of 50mm (2 ins) max.• Working width of 60cm (24 ins).• Contra-rotating reel for clean, consistent cut.• Front or rear discharge.• Choice of blades, with variable spacing, for year-round use.• Tungsten tips are 25mm long for a longer working life.• 6 forward speeds for efficiency under varying conditions & depths.• Reverse gear for manoeuvrability.• O.P.C. controls for operator safety.• New box design.• Powerful 14hp V twin petrol engine for smooth running and low
vibration, with independent drive to wheels and reel.
• Improved chassis design incorporating pivoted rear section and support wheels at front.
• Efficient hydraulic system with large volume tank, fewer pipe connections and stainless steel braided flexible pipes for improved heat dissipation.
• Direct drive to tine shaft via hydraulic motors mounted on scarifying units.• Extra durable tungsten tipped, hook blades with variable spacing.• Improved depth setting incorporating locking micro-adjusters on each unit.• Blades new registered design.• Tractor power requirement - 30hp minimum.
Option
Integral heavy-duty oil cooler.
• Floating unit to follow ground contours.• Fast ground coverage.• Interchangeable blades and optional variable spacing.• Quick, simple depth setting without tools to max. 50mm.• Contra-rotation of reel throws debris forward for clean,
consistent groove.• Standard Cat.1, 3-point linkage.• Collector box for use when working to depth of 25mm.• When used without collector box, scarifying unit can be offset
so that wheels do not run over the removed thatch.
Option
Hydraulic tipping kit.
Description Code Order ref
Rotorake 60260cm wide heavy duty de-thatcher with RR/602 FS11542mm tungsten blades & collection box.
Rotorake 602Sas above but fitted with seeder RR/602S FS1125
Optional reels
Standard thatch removal reel (23 x F36560 blades) FS1155
Light scarifying/verticut reel (44 x F36653 blades) FS1156
Rolaspike reel FS1158
Faze-Mo reel (11 x F37536 blades) FS1159
Spiral brush reel FS1157
Description Code Order ref
Triple, mounted hydraulic driven, 2m wide. VMO/2 FS1014Includes 57 2mm tungsten tipped blades.
Spare blades (set of 57) 2mm tungsten tipped ‘hook’ blades F36560
1mm tungsten tipped ‘hook’ blades F36653
Optional oil cooler kit VMO2TK FS1132
Description Code Order ref
1m wide mountes scarifier with single shaft. RRTM/1000 FS10352mm tungsten tipped blades & collector
Optional Faze-Mo reel FS1183
Options Faze-Mo blades (set of 19) F37536
1mm tungsten tipped blades (set of 54) F36608
2mm tungsten tipped blades (set of 32) F36106
3mm tungsten tipped blades (set of 32) F36231
Optional hydraulic tip kit FS1061
Description Code Order ref
Brush reel ARR/BR FS0818
Verticut reel ARR/RRT FS0292
Thatch control reel ST/TCR FS087/09
Thatch removal reel (ARR/3 & STR/18/2) ST/TRR FS087/13
Thatch removal reel (ARR/4) ST/TRR/4 FS087/27
Rolaspike reel ARR/RS FS1160
Synthetic brush reel ARR/SBR FS0867
Sports Fields Golf Amenity
13 12 FULL SPECIFICATION AVAILABLE ON www.sisis.com FULL SPECIFICATION AVAILABLE ON www.sisis.com
Sports Fields
Sports Fields
Golf
Golf
Amenity
Amenity
Tractor Mounted Sweepers Tractor Mounted Sweepers
Spreaders & Top Dressers
Litamina 1200 & 1500 SSS1000
PowaspredLitamisa 1800
Compact sweeper/collector for collecting all types of surface debris from fine turf and outfield turf.
A rotary brush for use on artificial turf surfaces to remove surface debris, lift the pile and redistribute sand or rubber crumb infill giving your surface maximum performance and life.
Top dresser which spreads a wide range of materials, at the desired rate, with an even consistent spread.Tractor mounted sweeper and collector for collecting
all types of surface debris from large areas.
• Collects wide range of materials incl. leaves, pine needles, grass clippings, thatch, cores, litter.
• Spiral design brush for effective collection.• Follows ground contours.• Simple brush adjustment without tools.• Large capacity hopper.• Hydraulic tip facility for easy emptying.• Useful for occasional use on paths and car parks.• Mesh hopper model for use on synthetic turf.• Standard cat 1, 3-point linkage, PTO drive.• Tractor power requirement 1200 - 25hp minimum.• Tractor power requirement 1500 - 30hp minimum.
• Aluminium hopper with stainless steel mesh for long life.• Adjustable drawbar which lifts upright for easy storage.• Hopper quickly removed for emptying.• Fast workrate keeping surfaces in play.• Wheel drive to the brush is disengaged by simple “pull & twist”
clutch levers on each wheel for transport between sites.• Adjustable brush to increase/decrease ground engagement and
to allow for brush wear.• Robustly constructed and low maintenance.• Tractor power requirement - 12hp minimum.
• Infinitely variable spreading rates.• Accurate placement.• Oscillating base plate to reduce bridging.• Rotating brush at point of discharge to ensure even spread.• 540 PTO drive from tractor.• Cable controls for material shut-off from tractor. • Handles with ease wide variety of materials even when damp,
especially sand based dressings.• Wheeled version has 4 turf-tyres on a twin axle to avoid marking
and to spread load on fine turf.
• Collects wide range of materials incl. leaves, pine needles, grass clippings, thatch, cores, litter.
• Spiral design brush for improved collection.• Follows ground contours.• Simple brush adjustment without tools.• Large capacity hopper.• Hi-tip facility.• Useful for occasional use on paths and car parks.• Standard cat 1, 3-point linkage, PTO drive.• Tractor power requirement 1800 - 45hp minimum.
Description Code Order ref
Litamina HT1.2m wide sweeper with standard hopper HLL/1200 FS1070
Litamina SH1.2m wide sweeper with mesh hopper HLL1200SH FS1072
Litamina 15001.5m wide sweeper HLL/1500 FS1047
Description Code Order ref
Artificial surface sweeper SSS/1000 FS1079
Description Code Order ref
Top dresser with wheels & drawbar TDM/48PT FS0780 Description Code Order ref
1.8m wide sweeper with high tip facility RSC/6HT FS0428
Sports Fields
Sports Fields
Sports Fields
Sports Fields
Golf
Golf
Golf
Amenity
Amenity
Amenity
Amenity
15 14 FULL SPECIFICATION AVAILABLE ON www.sisis.com FULL SPECIFICATION AVAILABLE ON www.sisis.com
Synthetic1200
version only
Synthetic
Spreaders & Top Dressers Seeders
1716 FULL SPECIFICATION AVAILABLE ON www.sisis.com FULL SPECIFICATION AVAILABLE ON www.sisis.com
Autospred Variseeder 1300
Truspred
Independently Powered Top Dresser. Versatile Tractor Mounted Seeder.
Hand Operated Spreader and Top Dresser.
• Infinitely variable spreading rates.• Oscillating base plate to reduce bridging.• Rotating brush at point of discharge to ensure even spread.• Slick tyres to avoid marking on fine turf.• OPC controls for safe, easy handling.• Hydrostatic drive for manoeuvrability.• Compact size for areas with restricted access, and for convenient. storage.• Independently powered – no tractor required.• Electric start.
• Seeding rate is variable and is simple and accurate to set by Zero-Max box.
• Fast work rate.• Overseeding carried out without taking ground out of play.• Studded roller creates seed bed.• Low maintenance with few wearing parts.• Integral weight bar. • Standard cat.1, 3-point linkage for use on most compact tractors.• Can be adapted for use with most common power units for golf
course and sports ground work.• An Ultra Fine seed roller is available for sowing pure bents.• Storage trolley.• Two discharge roller options for all types of seed. - Standard for rye and bent/fescue mixes. - Ultra fine for pure bents.
• Simple to set spreading rates.• Ribbed rubber conveyor belt for accurate placement.• Marker to avoid gaps or overlapping.• Carrier wheels permit spread right to the edge of bowling greens.• Rubber tyres to minimise marking.
Description Code Order ref
11hp self propelled top dresser ASD/33 FS0557 Description Code Order ref
1.3m wide seeder with discharge roller VSE/1300 FS1056(please specify ultra fine or standard)
Optional discharge rollerUltra fine, for pure bent seed only VSE/USFR FS1059
Standard, for rye grass/fescue bent VSE/SR FS1057
Description Code Order ref
0.9m wide drop spreader TSD/36 FS1174
Sports Fields
Sports Fields
Golf
Golf
Amenity
Amenity
Sport Golf Amenity
Implement Mounted Frames Implement Mounted Frames Options
1918 FULL SPECIFICATION AVAILABLE ON www.sisis.com FULL SPECIFICATION AVAILABLE ON www.sisis.com
Combination Implement Frames
1.8m Implements
1.2m Implements
1.3m Implements
2.4m Implements
Single pass maintenance system incorporates a mounted frame which accepts a variety of different implements for use on both turf and hard porous surfaces.
• Versatile – can be used on natural turf, synthetic turf and hard porous surfaces.
• Fast – Up to four operations carried out simultaneously.• Agri-jacks allow implements to be used lightly or more
aggressively as required.• 183cm and 244cm working widths available.• Quadraplay has carrying platform for hand tools, seed etc.• Connects to any tractor with 3-point linkage and utility
trucks with suitable frame.• Robustly constructed and very low maintenance.
Quadraplay - 4 implements
Twinplay - 2 implements
Tri-play - 3 implements
Singleplay - 1 implements
Description Code Order ref
Quadraplay frame for 4 implements QMF FS0758
Tri-play frame for 3 implements TRP FS0870+FS1001
Twinplay frame for 2 implements TWP FS0870+FS1123
Singleplay frame for 1 implement SP FS08700
Description Code Order ref
Intermediate rake QMR/6 FS0759
Tilth rake QTR/6 FS0760
Spring tine grooming rake QGR/6 FS0761
Fine grooming rake FGR/6 FS1075
Levelling lute QTL/6 FS0762
Roller QR/6 FS0763
Spiker slitter QSS/6 FS0764
Brush QB/6 FS0765
Flexicomb FXC/6 FS1134
Zig zag brush ZZB/6 FS0869
2m wide grader plate for sand tracks QGP/6 FS1111/1110
Rola Spike 180 RS/180 FS1169
Description Code Order ref
Spring tine grooming rake QGR/8 FS0771
Fine grooming rake FGR/8 FS1076
Levelling lute QTL/8 FS0772
Roller QR/8 FS0773
Spiker slitter QSS/8 FS0774
Brush QB/8 FS0775
Zig zag brush ZZB/8 FS0516
2.4m wide grader plate for sand tracks QGP/8 FS1111/1109
Sports Fields Golf Amenity Synthetic
Description Code Order ref
Deep slitter (32 x D6951 tines) FS1162
Spiker slitter SS/4MT FS0561
Grooming rake QGR/4 FS1148
Brush QB/4 FS0865
Roller QR/4 FS0863
Description Code Order ref
Flexicombe FS1163
Tractor Mounted Brushes
Tractor Mounted Powered Brushes
21 20 FULL SPECIFICATION AVAILABLE ON www.sisis.com FULL SPECIFICATION AVAILABLE ON www.sisis.com
Osca 3
Flexibrush
Varibrush
Tractor mounted oscillating brush.
Tractor mounted brush.
Tractor mounted multiple-action brush.
• Equally effective on natural and synthetic turf.• Aggressive brushing action disperses top dressing quickly and evenly,
preventing excess material being left on the surface where it could contribute to disease.
• On synthetic surfaces, keeps infill mobile, preventing surface compaction and loss of porosity.
• On synthetic surfaces, maintains infill level at a constant depth, giving consistent playing characteristics, and preventing pill damage caused by reduced infill levels.
• Uses fewer passes than conventional drag brushes, causing less compaction.
• Option of using any 1.8m implements from mounted frame options using twin implement extension arm kit.
• Storage frame is supplied as standard.
• Equally effective on natural and sand filled synthetic turf.• 5.35m wide working width.• Brush sections float to follow ground contours.• Outer sections fold for transport and storage.• Supplied with stand and castors for easy movement when storing.
• Equally effective on natural and synthetic turf.• Multiple action means fewer passes and therefore reduced compaction.• Easy to handle and attach.• Drawbar is adjustable for towing height and length.• Brush frame is reversible to allow for brush wear.• 1.85m wide working width.• Three versions are available: - 3-point mounted for tractors & trucksters (adaptor frame required). - Manual lift towing frame & ball hitch. - Electric lift towing frame & ball hitch.
Description Code Order ref
1.8m wide, 3 point linkage mounted OSC/3 FS0958
Optional twin implement extension arms FS1123
Optional 1.8m wide brush QB/6 FS0765
For other prices see mounted frame implements
Retro-fit storage frame FS1136
Description Code Order ref
5.35m wide, 3 point linkage mounted FBR/537 FS1033
Description Code Order ref
Complete unit with wheels including: VBR/186 FS1023
Mounting options - please specify when ordering3 point linkage mounting frame FS1023+FS1029
manual lift towing frame & ball hitch FS1023+FS1024
electric lift towing frame & ball hitch FS1023+FS1027
Sports Fields
Sports Fields
Sports Fields
Golf
Golf
Golf
Amenity
Amenity
Amenity
Synthetic
Synthetic
Synthetic
Implement Frames
Towed Implement FrameDesigned specifically for daily maintenance of artificial surfaces, keeping it in good playing condition and maximising surface life. Ideal for towing behind small compact garden tractors.
• Implements can be used singly, or in pairs.• Enables Quadraplay implements to be used even when
hydraulic lift is not available.• Specific 1.2m implements.
Option
Electric winch lift option for easy lifting without getting off the power unit.
Description Code Order ref
Towed single implement frame - manual lift TIF FS1118
Towed single implement frame - electric lift FS1118+FS1122
Twin implement extension arms FS1123
Specific Implements1.2m wide deep slitter (32 x D6951 tines) FS1162
1.2m wide spiker slitter SS/4MT FS0561
1.2m wide grooming rake QGR/4 FS1148
1.2m wide brush QB/4 FS0865
1.3m wide flexicombe FS1163
1.2m wide roller QR/4 FS0863Sports Fields Golf Amenity Synthetic
Ride-on Brushes Line Markers
Rollers
23 22 FULL SPECIFICATION AVAILABLE ON www.sisis.com FULL SPECIFICATION AVAILABLE ON www.sisis.com
Robbi Truline
TrulevelRosca
Ride-on triple brush. Unique, continuous belt system ensures positive adhesion to the surface and a continuous supply of marking liquid.
Bowling Green Roller.
Ride-on brushing system, comprising a pair of mid-mounted oscillating brush units and three rear-mounted brushes.
• Equally effective on natural and synthetic turf.• Specially designed “S” brushes for improved brushing effect.• Interchangeable brushes for different surfaces and conditions.• Brushes are ram assisted to hold them to the surface and to fold them
back when not in use.• Low ground pressure and low centre of gravity to prevent surface damage.• 1m folded width for ease of access and storage.• OPC controls for safe, easy handling and accurate control.• Simple to drive and easy to maintain.• Fast operation encourages regular use.• Fold-over seat has suspension springing and carrying box below.• ROBBI is supplied as standard with one set soft bristles and 1 set medium
bristles.
Option
LPG gas conversion option.
• Unique continuous belt system.• 3 widths of belt available for different sports.• Belts are interchanged very quickly without tools.• Line of the belt gives a positive guide for steering.• Curves can be marked with ease.• Applies most types of marking liquid.• Most areas can be marked in one pass.• Wide pneumatic tyres improve performance in adverse conditions.• Dismantled in seconds for easy and thorough cleaning.• Supplied with 100mm belt.
• Over-riding action on slight hollows allows level areas to be firmly rolled, whilst low areas are left, so that the playing surface is progressively levelled.
• Outer rollers can be raised concentrating the whole weight on the centre cylinder if desired.
• Additional weights can be added if required, to increase weight to approx. 150kg (328lbs).
• Runs without effort on self-lubricating bearings.• Can be pushed or pulled with ease.
• Specially designed for maintaining synthetic surfaces.• Ride-on for manoeuvrability and operator convenience.• Electric start.• Hydrostatic drive for forward/reverse.• Oscillating brushes for thorough, periodic brushing.• Rear mounted brushes for routine, frequent use.• Outer brushes fold for transport and storage.• Causes less compaction than conventional drag brushes.• Rear ball hitch for towing.
Option
LPG gas conversion option.
Description Code Order ref
6hp ride-on brush system, includes ROB/8 FS08322 sets of brushes (soft & medium)
Description Code Order ref
Liquid line marker with 100mm belt LM/234 FS0117
Spare marker belts50mm wide marker belt D5058
75mm wide marker belt D5061
100mm wide marker belt D5065
Description Code Order ref
120kg bowling green roller HRT FS0801
Additional weights (set of 2) F31936Description Code Order ref
11.5hp ride-on brush system for FS1116artificial turf
Sports Fields
Sports Fields
Amenity
Amenity
Amenity
Amenity
Synthetic
Synthetic
Sport
Hand Operated Equipment
Hand Operated Equipment
25 FULL SPECIFICATION AVAILABLE ON www.sisis.com
Aerdrain Fork
Trulute
Combirake
Drag Mat
Bray Hand Tools
Drag Brush
A simple but effective tool for year round use.
Reversible levelling grid for many uses on turf surfaces.
Simple to use, dual purpose implement for use on small fine turf areas.
Useful hand tool on small areas for rubbing in dressings, routine surface renovation on hard porous pitches, etc.
Ideal for overseeding and aerating small areas on bowling greens, tennis courts, golf greens, tees and ornamental lawns.
Basic hand tool for natural and synthetic turf and hard porous surfaces.
• 4 kinds of tines
• The two sides of the TRULUTE have completely different profiles: - one side has smooth edges for spreading top dressings and levelling. - one side has sharp edges for working-in top dressings, cutting back high spots etc.
• Dual purpose.• Downward pressure is applied by gentle pressure on the handles.• Virtually maintenance free.• Rake wires and brush can be replaced when worn.• Rake and brush can be lifted clear of the ground for transport.
• Equally effective on natural and synthetic turf, and hard porous areas.• Can also be drawn behind a tractor, or in conjunction with a top-dresser.
• Interchangeable heads between slotter and spiker.• 50% saving of grass seed when overseeding using slotter.• Rapid germination and stronger growth.• No loss of play and no top dressing required.• Simple to store and maintain.• Working width 250mm (10”).
• Heavy duty drag brush is for use on sand filled synthetics and hard porous surfaces, and for brushing in top dressing.
Description Code Order ref
Turf aerating fork excluding tines FC FS1144
127mm long solid tines (set of 5) S D1534
127mm long hollow tines (set of 3) H D1535
Description Code Order ref
60cm wide levelling & dressing tool TL/24 FS0302
Description Code Order ref
Combined rake & brush unit CMB/1 FS0932
Description Code Order ref
1.3m wide x 1m deep hand pull drag mat HDM/54 FS1036*
Description Code Order ref
Bray hand seed slotter BS002
Bray hand seed spiker BS004
Additional spiker reel BS003
Additional slotter reel BS005
Description Code Order ref
1.8m heavy duty hand drag brush DB/6H FS1166
Dragmat
DragmatTowed Dragmat.• Working width of 270cm (9ft).
Description Code Order ref
2.7m wide x 1.2m long towed dragmat HDM/108 FS1037
Sports Fields Golf Amenity
24 FULL SPECIFICATION AVAILABLE ON www.sisis.com
We keep good company
SISIS supports industry associations through corporate membership, which include:
Visit sisis.com for further information
Telephone 01274 565131www.stri.co.uk
Telephone 01908 312511www.iog.org
Telephone 01347 833 800www.bigga.co.uk
World-class turf maintenance equipment
Built with Experience
Associations
Dennis is synonymous with ornamental, summer and winter sports surfaces, designing and manufacturing high quality pedestrian grounds maintenance equipment, meeting the needs of groundsmen, greenkeepers and gardeners for over 80 years.
Part of the Howardson group alongside SISIS, the two product portfolios offer a truly comprehensive range of British manufactured products, built and designed with a vital ingredient: EXPERIENCE.
Our reputation is built not only on the quality of our products but also on the high level of customer and technical support provided by our experienced field and office based teams and our professional dealership network.
To find out more about the Dennis range of products or to request a catalogue telephone +44 (0)1332 824777 or visit www.dennisuk.com.
26
SISIS - Division of Howardson Ltd.
Howardson Works, Ashbourne Road, Kirk Langley, Derby DE6 4NJTel: +44 (0)1332 824777 Fax: +44 (0)1332 824525 E-mail: [email protected]
www.sisis.com
www.dennisuk.comwww.sisis.com
Due to a policy of continual development Sisis reserves the right to change specification without prior notification. All goods sold subject to the company’s terms and conditions of sale, copies available on request. E&EO.
World-class turf maintenance equipment